Download A.O. Smith Hot Water Storage Tanks Technical Documents

Commercial Storage Tanks
FACTORY JACKETED AND
INSULATED STORAGE TANKS
These A. O. Smith storage tanks are designed for storing potable water.
Fitting locations are designed to meet the needs of normal installations plus
those for the A. O. Smith Cer-Temp 80 ® piping methods.
FEATURES
A. O. Smith storage tanks are ideal for
use with gas-fired copper heat exchanger
equipment for storage of any potable
water at temperatures up to 180°F.
GLASS LINED TANK - Alkaline
borosilicate composition permanently
fused to steel by firing at a temperature
of 1600°F, providing years of corrosion
protection and dependable use.
HEAVY GAUGE STEEL JACKET - With
baked enamel finish.
THREADED OPENINGS - All tanks
furnished with threaded openings for
thermometer, relief valve, 2” recirculation
lines, tankstat, and drain valve.
INSULATION - Storage Tanks meet or
exceed R12.5 minimum thermal insulation
requirements of the U. S. Department
of Energy and current edition of
ASHRAE/IESNA 90.1
TJ-80S, TJ-80A, TJV-120M and TJV-120A
•Fits through 30” door •Magnesium anode for anti-corrosion
protection
TJ-80A
• 80 gallons
• High density foam insulation saves
energy, helps reduce standby heat loss
• 160 psi ASME standard working pressure
MODELS
TJ-80S, TJ-80A
TJV-120A, TJV-120M
& TJV-200M
TJV-120A
• 119 gallons
• High density foam insulation saves
energy, helps reduce standby heat loss
• 160 psi ASME standard working pressure
TJ-80S
• 80 gallons • High density foam insulation saves
energy, helps reduce standby heat loss
• 160 psi working pressure
TJV-120M
• 119 gallons • High density foam insulation saves
energy, helps reduce standby heat loss
• 160 psi working pressure
TJV-200-M - 175 GALLONS
• 160 psi ASME standard working pressure
• 2” foam insulation
• Handhole cleanout (Standard) • Fits through 33” door • Storage is downsized to 175 gallons for
a 32” x 77” envelope for space restrictive
installations. Model TJV-200 is available
with 200 gallons of storage.
• Magnesium anodes for extra corrosion
protection
5 YEAR WARRANTY
If the tank should leak any time during
the first 5 years, under the terms of the
warranty, A. O. Smith will repair or replace
the tank. Installation, labor, handling
and local delivery are extra. For complete
information, consult the written warranty.
120 Gallon Model
(FOR SELECT MODELS)
SUGGESTED SPECIFICATION
Storage tank shall be A. O. SMITH glasslined storage tank. Tank shall be ________ “ x ________ “ and have a nominal capacity of _________ gallons. Tank(s)
shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition which has been fused to the
steel by firing at a temperature of 1600°F. Glass coating shall be continuous over the entire inner surface of the tank. Outer jacket shall have a baked enamel
finish. Meets minimum thermal insulation requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall
be provided. Tank shall have a working pressure of _________ psi. Tank shall have a five year limited warranty as outlined in the written warranty.
Revised November 2013
AOSTT35100 R Nov 2013 Storage Tank Spec.indd 1
Page 1 of 2
AOSTT35100
11/18/13 1:43 PM
Commercial Storage Tanks
TJ-80A
TJ-80S
TJ-80A
TJ-80S
2" NPT
3/4" NPT
(ANODE)
3/4" NPT
(ANODE)
1" NPT
2" NPT
2" NPT
2" ASME26INSPECTION
1/2"
OPENING (PLUGGED)
26 1/2"
3/4" NPT
REAR
3/4" NPT
REAR
TJV-120M
42 3/4"
42 3/4"
32 1/4"
32 1/4"
3/4" NPT
FRONT
19 1/2"
19 1/2"
11" 9 3/4"
11" 9 3/4"
2" NPT
FRONT & REAR
2" NPT
3/4" NPT
(ANODE)
63"
51 7/8"
TJV-120A
51 7/8"
47"
47"
3/4" NPT
2" NPT FRONT
1" NPT
2" NPT
FRONT & REAR
3/4" NPT
2" ASME INSPECTION
REAR
3/4" NPT
REAR
63"
3/4" NPT
FRONT
2" NPT
FRONT & REAR
3/4" NPT
REAR
25 1/4"
16"
3 3/4"
3/4" NPT
REAR
FRONT
TJV-120A
1" NPT
2" ASME INSPECTION
2" NPT
OPENING (PLUGGED)
1-1/4" NPT
(ANODE)
1" NPT
1" NPT
3/4" NPT
(ANODE)
ASME PLATE
LOCATED UNDER
COVER
62"
29 3/8"
15"
4 1/8"
2" NPT
FRONT
3 1/2"
3/4" NPT
50 1/2"
44 1/2"
29 3/8"
CLEANOUT
1" NPT
FRONT
11"
2" NPT FRONT
& REAR
28"
1" NPT
FRONT
28"
21 1/4"
17 3/4"
1" NPT
10 3/4"
2" ASME INSPECTION
OPENING (PLUGGED)
2" ASME INSPECTION
ASME PLATE
OPENING (PLUGGED)
LOCATED UNDER
COVER
9 3/4"
2" NPT
FRONT
2" NPT
FRONT & REAR
3/4" NPT
FRONT
62"
62"
54 1/4"
61 3/4"
54 1/4"
2" NPT
42 1/4" FRONT
42 1/4"
11"
15"
4 1/8"
3 1/2"
3/4"
NPT
2" NPT
FRONT
50 1/2"& REAR
44 1/2"
TJV-200M
1" NPT
2" ASME INSPECTION
OPENING (PLUGGED)
ASME PLATE
LOCATED UNDER
COVER
2" NPT FRONT
2" NPT FRONT
& REAR
CLEANOUT
21 1/4"
3/4" NPT
(ANODES)
9 3/4"
11"
4 1/8"
2" NPT
FRONT & REAR
213/4"
1/4"
17
10 3/4"
9 3/4"
2" NPT
FRONT & REAR
3 1/2"
3/4" NPT
FRONT
2" NPT FRONT
61 3/4"
2" NPT 3/4" NPT
FRONT
50 1/2"
44 1/2"
CLEANOUT
15"
1-1/4" NPT
(ANODE)
2" NPT FRONT
61 3/4"
2" NPT
FRONT
42 1/4"
2" NPT
FRONT & REAR
3/4" NPT
REAR
2" NPT
2" NPT
3/4" NPT
(ANODE)
3/4" NPT
FRONT
28"
TJV-120A
TJV-120M
2" NPT
3/4" NPT
REAR
7"
3 3/4"
1" NPT
FRONT
54 1/4"
2" NPT
FRONT & REAR
7"
2" ASME INSPECTION
OPENING (PLUGGED)
29 3/8"
2" NPT
1-1/4" NPT
2" NPT
(ANODE)
FRONT & REAR
16"
OPENING (PLUGGED)
TJV-120M
3/4" NPT
(ANODE)
25 1/4"
ASME PLATE
UNDER COVER
ASME PLATE
UNDER COVER
54 7/8"
3/4" NPT
(ANODE)
2" ASME INSPECTION
OPENING (PLUGGED)
2" NPT
FRONT & REAR
2" NPT
FRONT & REAR
54 7/8"
2" NPT
1" NPT
3/4" NPT
FRONT
2" ASME INSPECTION
OPENING (PLUGGED)
2" ASME INSPECTION
OPENING (PLUGGED)
17 3/4"
10 3/4"
2" ASME INSPECTION
OPENING (PLUGGED)
2" NPT
32 "
TJV-200M
1" NPT
TJV-200M
3/4" NPT
(ANODES)
3/4" NPT
(ANODES)
3/4" NPT
2" NPT
77 "
2" ASME INSPECTION
OPENING (PLUGGED)
64"
32 "
17 1/4"
12 1/4"
2" NPT INSPECTION ASME RATING PLATE AND
2" ASME
HAND HOLE LOCATED2" NPT
OPENING (PLUGGED) UNDER COVER
32 "
1" NPT
17 1/4"
12 1/4"
3/4" NPT
1" NPT
3/4" NPT
For Technical Information and Automated
Fax Service, call 800-527-1953. A.O. Smith
2" NPT Corporation reserves the right to make product changes or improvements without prior notice.
77 "
www.hotwater.com
77 "
ASME
64"RATING PLATE AND
HAND HOLE LOCATED
UNDER COVER
64"
Revised November 2013
17 1/4"
12 1/4"
AOSTT35100 R Nov 2013 Storage Tank Spec.indd 2
17 1/4"
17 1/4"
12 1/4"
12 1/4"
2" NPT
ASME RATING PLATE AND
HAND HOLE LOCATED
UNDER COVER
Page 2 of 2
AOSTT35100
17 1/4"
12 1/4"
11/18/13 1:43 PM