Download Belden FTP CAT5E 4PR AWG24, 1000m

Product Datasheet
P/N - 43133 Rev.3A
Page 1 of 2
Date 01-08-2001
Belden 1633ENH
CAT 5 enhanced FTP FRNC
Application
•
•
Horizontal and building backbone cable.
Support current Category 5 and Category 5 enhanced applications, such as:
10 Base-T, 100 Base-T, 1000 Base-T (Gigabit Ethernet), FDDI, ATM
Standards
•
•
General standards:
Future standards like:
ISO/IEC 11801, EN 50173
ISO/IEC 11801 2nd edition, EN 50173 2nd edition und prEN 50288-3-1
Construction & Dimensions
•
•
•
•
•
•
•
•
•
Construction:
Conductor:
Conductor diameter:
Conductor insulation material:
Diameter over insulation:
Drain wire:
Shield:
Jacket material:
Outer diameter:
shielded 4 twisted pairs
solid bare copper
AWG 24 (0,52 mm)
Polyethylene (PE)
1.10 mm ± 0.05 mm
AWG 26 tinned copper
Aluminium/polyester foil
FRNC (Flame retardant)
6.0 mm ± 0.3 mm
Colour code
Pair 1
Pair 2
Pair 3
Pair 4
White-Blue/Blue
White-Orange/Orange
White-Green/Green
White-Brown/Brown
Electrical characteristics (at 20 ºC)
Attenuation
Frequency
1)
Maximum
Typical
1
4.0
2.0
4
4.0
3.8
10
6.3
6.0
16
8.0
7.6
20
9.0
8.5
31.25
11.4
10.8
62.5
16.5
15.0
100
21.3
19.2
MHz
dB/100m
dB/100m
NEXT
Frequency
1)
Minimum
Typical
1
60.0
70
4
56.3
62
10
50.3
57
16
47.2
54
20
45.8
52
31.25
42.9
49
62.5
38.4
45
100
35.3
43
MHz
dB
dB
Power Sum NEXT
Frequency
1
1)
Minimum
57.0
Typical
68
4
53.3
60
10
47.3
55
16
44.2
52
20
42.8
50
31.25
39.9
47
62.5
35.4
43
100
32.3
41
MHz
dB
dB
Power Sum ELFEXT
Frequency
1
1)
Minimum
60.8
Typical
73
4
48.8
61
10
40.8
53
16
36.7
47
20
34.8
45
31.25
30.9
41
62.5
24.9
37
100
20.8
33
MHz
dB
dB
ACR
Frequency
1)
Minimum
Typical
1
56.0
68.0
4
52.3
58.2
10
44.0
51.0
16
39.2
46.4
20
36.8
43.5
31.25
31.5
38.2
62.5
21.8
30.0
100
14.0
23.8
MHz
dB/100m
dB/100m
Power Sum ACR
Frequency
1
1)
Minimum
53.0
Typical
66.0
4
49.3
56.2
10
41.0
49.0
16
36.2
44.4
20
33.8
41.5
31.25
28.5
36.2
62.5
18.8
28.0
100
11.0
21.8
MHz
dB/100m
dB/100m
1)
: Values according to cable requirements of ISO/IEC 11801 category 5 enhanced
Belden Wire & Cable B.V. Netherlands Tel. +31-(0)77-3878-555 or Fax. +31-(0)77-3878-488 or E-mail: [email protected]
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Technical specifications and printing errors are subject to change without notice.
Product Datasheet
P/N - 43133 Rev.3A
Page 2 of 2
Date 01-08-2001
Belden 1633ENH
CAT 5 enhanced FTP FRNC
Electrical characteristics (at 20 ºC)
Nominal mutual capacitance at 1 kHz
Maximum conductor DCR
NVP - Nominal Velocity of Propagation
SKEW – Propagation delay difference (100 MHz)
Impedance 1 - 100 MHz
50 nF/km
93,5 Ohm/km
0.70 c
typical ≤ 15 ns/100m
100 ± 15 Ohm
General and environmental characteristics
Temperature range - operation
Temperature range - installation
Minimum bending radius - operation
Minimum bending radius - installation
Maximum pulling tension
Flame retardancy
Energy of flame
Weight (approx.)
Maximum operating voltage
Maximum continuous current per conductor (25°C)
-20°C - +60°C
+0°C - +50°C
24 mm
48 mm
80 N
IEC 332-1
500 kJ/m
43 kg/km
48 V rms
1.4 A
Ordering information
MARKING
Text on the cable jacket
Inkjet printing
BELDEN 1633ENH FTP CAT5E 4PR AWG24 LSNH ISO/IEC 11801 EN 50173 VERIFIED
100 OHM
Meter marking:
JACKET COLOUR
Colour
Grey
Yes
RAL code
RAL 7032
PACKAGING (PUT UP)
Belden code
Delivery length
43133 xxxx 240
500 m
43133 xxxx 241
1000 m
xxxx: Belden colour code
Belden colour code
3252
Weight
21.0 kg
42.0 kg
Remark
Non returnable reel
Non returnable reel
Belden Wire & Cable B.V. Netherlands Tel. +31-(0)77-3878-555 or Fax. +31-(0)77-3878-488 or E-mail: [email protected]
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Technical specifications and printing errors are subject to change without notice.