Download Actebis Exsys EX-44093 PCI-Express 4S Serial RS-232 card

Transcript
PCI-Express I/O Interface
EX-44093
Anwendung/Application :
Kassensysteme
P.O.S. System
Kartenleser
Card reader
Terminal
Barcode Reader
LED Display
Waagen/
Balance
Operating System (OS):
Geprüft/Approved:
C
CE FC
Verpackung/Packing:
WEEE Reg.Nr.:
DE97424562
4S Serielle RS-232 PCI-Express Karte
Beschreibung :
Die EX-44093 PCI Express I/O Karte stellt vier Serielle RS-232 High Performance UART 16C950 Ausgänge zur Verfügung. Er ist entwickelt worden um vier weitere Serielle Ausgänge für PC, kleine Workstation oder Server über den PCI Express Bus zu erweitern.
+5V und +12V auf einen Pin der 9 Pin Stecker konfigurierbar POS System (Power over System).
Merkmale :
Schnittstelle: RS-232 V.24
FIFO Buffer: 16C950 mit 128Byte
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Daten Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
PCI Express Schnittstelle kompatibel zu 1.0a Spezifikation
Chip-Set :
Oxford OX16PCI954
Datentransfer-Rate :
50 Baud bis 921.6KBaud
Anschlüsse :
4 x 9 Pin D-SUB Seriell Stecker (mit Octopus Kabel)
1 x 5/12V Stecker für Anschluss vom Rechner Netzteil
Hardwaresysteme :
PCI Express Slot x1 bis x16
Betriebstemperatur :
Luftfeuchtigkeit :
0 bis 550C (32 bis 1310F)
5 bis 95%
Abmessung / Gewicht :
120 x 66 mm / 150g
Lieferumfang :
EX-44093, 1 x Octopus Kabel mit 4 x 9 Pin Seriell Stecker, Treiber CD, Handbuch
Description :
The EX-44093 PCI Express I/O adapter provides 4 high performance 16C950-type UART compatible RS-232 serial ports. It is designed for
PC, thin client or server to provide instant COM port expansion via the PCI Express Bus (PCIE).
The card is fully PCI Express Plug-and-Play compatible and no IRQ and I/O address conflict problems.
Provides +5V and +12V over the 9 pin connector POS System (Power over System)
Feature :
Interface: RS-232 V.24
FIFO Buffer: 16C950 with 128Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
PCI Express Interface: Fully compliant with PCI-Express Base Specification Revision 1.0a
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Chip-Set :
Oxford 16954
Data transfer rate :
50Baud to 921.6KBaud
Connectors :
4 x 9 pin D-SUB serial connector (with Octopus cable)
5/12V Power connector for take the power from the power supply of computer case
Hardware system :
1 x PCI Express Slot x1 to x16
Operating Temperature :
Humidity :
0 to 550C (32 to 1310F)
5 to 95%
Size / Weight :
120 x 66 mm / 200g
Packaging contents :
EX-44093, 1 x Octopus cable with 4 x 9 pin male connector, Driver CD, Manual
4S Serial RS-232 PCI-Express card