Download Sylvania DVR90DE DVD Recorder User Manual

E6500UD.QX
03.12.8
19:06
Page 1
DVD Recorder
DVR90DE
Please read before using this equipment.
If you need additional assistance for set-up or operating after reading owner’s manual,
please call TOLL FREE : 1-800-968-3429 or visit our web site at http://www.funai-corp.com
E6500UD.QX
03.12.8
19:26
Page 2
Table of contents
IMPORTANT SAFEGUARDS . . . . . . . . 3
PRECAUTIONS . . . . . . . . . . . . . . . . . . .4
LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . .4
About Copyright . . . . . . . . . . . . . . . . . . . . . . . . .4
Before you start . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Easy understanding for DVD recording . . . . . . .6
Guide to Displays . . . . . . . . . . . . . . . . . . . . . . . . .8
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installing batteries in the remote control . . . . .10
Using a remote control . . . . . . . . . . . . . . . . . . .11
Information on this owner's manual . . . . . . . . .11
Symbol in this owner's manual . . . . . . . . . . . . .11
Location of controls . . . . . . . . . . . . . . . . . . . . . .12
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Front display . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Connections . . . . . . . . . . . . . . . . . . . . .16
Connection to antenna . . . . . . . . . . . . . . . . . . .16
When connecting to a cable box
with only a few scrambled channels . . . . . . . . . . . . .16
When connecting to a cable box
with many scrambled channels . . . . . . . . . . . . . . . . .17
Connection to other devices . . . . . . . . . . . . . . .18
Connection to TV with a standard A/V cable . . . . .18
Connection to TV with a S-Video cable . . . . . . . . . .19
Connection to TV with a component video cable . .19
Connection to TV and VCR . . . . . . . . . . . . . . . . . .20
Connection to AV amplifier
with a coaxial digital audio cable . . . . . . . . . . . . . . .21
Getting started . . . . . . . . . . . . . . . . . . .22
Switching on . . . . . . . . . . . . . . . . . . . .
Initial setting: Channel setting . . . . . .
Getting channels automatically . . . . . . . .
Adding/deleting channels . . . . . . . . . . . .
Initial setting: Clock . . . . . . . . . . . . . .
Setting the clock . . . . . . . . . . . . . . . . . .
Adjusting the clock automatically . . . . . .
Setting the daylight savings time . . . . . . .
Initial setting: Selecting the TV aspect
Initial setting: RF converter output
(Watching the TV programs received
by the tuner of the DVD recorder) . .
. . . . . . . .22
. . . . . . . .22
. . . . . . . . .23
. . . . . . . . .24
. . . . . . . .25
. . . . . . . . .25
. . . . . . . . .27
. . . . . . . . .28
ratio . . .29
. . . . . . . .30
Recording . . . . . . . . . . . . . . . . . . . . . . .32
Information on DVD recording . . . . . .
Recording speed . . . . . . . . . . . . . . . . . .
Restrictions on recording . . . . . . . . . .
Settings for recording to a blank disc .
Formatting a disc . . . . . . . . . . . . . . . . .
Recording from the TV . . . . . . . . . . . .
One-touch timer recording . . . . . . . . .
Checking the recording picture quality
Finalizing the discs . . . . . . . . . . . . . . . .
2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.32
.32
.32
.33
.34
.36
.37
.37
.38
Timer recording . . . . . . . . . . . . . . . . . . . .
Checking the imformation on the timer
programming during the timer recording
The priority of overlapped setings . . . . .
Setting a disc to protect . . . . . . . . . . . . .
Recording from an external component .
. . . . .41
...
....
....
....
.43
.44
.45
.46
Playing discs . . . . . . . . . . . . . . . . . . . . .48
Information on DVD play . . . . . . . . . . . . . . . . .48
Basic Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Playing discs using the disc menu . . . . . . . . . . .51
Playing discs using the title menu . . . . . . . . . . .52
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Step by step playback . . . . . . . . . . . . . . . . . . . .53
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Title/Chapter search . . . . . . . . . . . . . . . . . . . . .56
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Fast forward / Fast reverse search . . . . . . . . . .58
Slow forward / Slow reverse play . . . . . . . . . . .58
Skipping TV commercials during play . . . . . . . .59
Selecting the format of audio and video . . . . . .59
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .59
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .61
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .62
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .62
Editing . . . . . . . . . . . . . . . . . . . . . . . . .64
Information on disc editing . . . . . . . . . . . . . . . .64
Editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . .65, 69, 77, 86
Putting names on titles . . . . . . . . . . . . . .66, 71, 80, 87
Setting or clearing chapter markers . . . . . . .68, 73, 81
Deleting parts of titles . . . . . . . . . . . . . . . . . . . .70, 78
Setting pictures for thumbnails . . . . . . . . . . . . . .74, 83
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .75
Releasing titles from protecting . . . . . . . . . . . . . . . .76
Adding titles to a playlist . . . . . . . . . . . . . . . . . . . . .84
Deleting a playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Using SETUP menu . . . . . . . . . . . . . . .88
Other settings: Parental Lock . . . . . . . . . . . . . .89
Setting a parental lock level . . . . . . . . . . . . . . . . . . .89
Other settings: Language settings . . . . . . . . . . .92
Choosing the menu language . . . . . . . . . . . . . . . . . .92
Choosing the audio language . . . . . . . . . . . . . . . . . .93
Choosing the subtitle language . . . . . . . . . . . . . . . . .94
Other settings: Audio settings . . . . . . . . . . . . . .96
Setting digital audio output . . . . . . . . . . . . . . . . . . .96
Compressing the range of sound volume . . . . . . . . .98
Outputting the sound during play in fast forward . .99
Other settings: Display . . . . . . . . . . . . . . . . . .100
Others . . . . . . . . . . . . . . . . . . . . . . . .102
Troubleshooting . . . . . . . . . . . .
Quick Guide to DVD disc types
Language code . . . . . . . . . . . . .
Notes about discs . . . . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.102
.104
.105
.106
.107
E6500UD.QX
03.12.8
19:06
Page 3
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instructions
should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7) Water and Moisture - Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and
the like.
8) Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
9) A product and cart combination should be PORTABLE CART WARNING
(Symbol provided by RETAC)
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10)Ventilation - Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, and
S3125A
these openings must not be blocked or
covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
11)Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12)Grounding or Polarization - This product may be equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13)Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the product.
14)Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15)Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16)Overloading - Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk
of fire or electric shock.
17)Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18)Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19)Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the product to its normal operation,
e) If the product has been dropped or damaged in any way,
and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
20)Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
21)Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22)Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
3
E6500UD.QX
03.12.8
19:06
Page 4
PRECAUTIONS
LASER SAFETY
This player employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, ON THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate
this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
4
E6500UD.QX
03.12.8
19:06
Page 5
Before you start
Features
Recording
This DVD recorder is compatible for you with both
DVD-RW, which is rewritable repeately, and DVDR, which is available for recording once. You can
choose either one for your convenience.
Up to 8 program recording:
You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available.
One-touch timer recording:
Easily you can set a recording time as you prefer.
Every time the REC button pressed during recording, the recording time will be increased by 30 minutes up to 4 hours. The recording automatically
stops when the recording time you set is reached.
REC MONITER:
Just one press of REC MONITOR button makes you
available for confirming of the recording picture
quality with the current recording mode before you
attempt to record the program. You can change the
recording mode to another here.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you
set in SETUP menu before attempting to record. It
greatly helps you to edit the recordings as you purpose.
Automatic Title menu making:
The DVD recorder makes title menus automatically
as the recordings are made.
Automatic PLAYLIST making (VR mode):
The Playlist will be prepared from the Original list,
so that you can edit titles in Playlist as you prefer.
The original list is kept as it is.
Play
Theater surround sound in your home:
When connenting the DVD recorder to an amplifer
or a decorder which is compatibale with Dolby
Digital, you are allowed to experience the theater
surround sound from discs with those sorround
sound systems.
Quick search for what you want to watch:
You can easily find the part you want to watch using
serch function. Search for a point on a disc by title,
chapter, or time.
Start to play from Original Playlist:
Title playing is available from either an original list or
Playlist.
Editing
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in
your recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles
on Playlist variously as you prefer.
Putting names on titles (Page XX)
Setting pictures for thumbnails (Page XX)
Setting/clearing chapter markers (Page XX)
Deleting parts of titles (Page XX) etc
Protecting titles:
To avoid erasing titles, the protect function is useful
when it is ON in the original list.
Compatibility
Available for playing discs recorded with
Video mode on a regular DVD player (Video
mode):
Discs recorded with the Video mode can be played
on regular DVD players, including computer DVD
drives compatible with DVD-Video playback*.
* DVD-Video Format (Video mode) is a new format for
recording on DVD-R/RW discs that was approved by the
DVD Forum in 2000. Adoption of this format is optional
for manufactures of DVD playback devices, and there are
DVD-Video players, DVD-ROM drives or other DVD playback devices that do not play DVD-R/RW discs recorded
in the DVD-Video Format.
5
Before you start
Not only playing the discs of DVD or CD, but this DVD recorder features for you recording to DVD discs
and editing them after that.
Followings are what you can do with this DVD recorder.
E6500UD.QX
03.12.8
19:06
Page 6
Before you start
Easy understanding for DVD recording
You may have some simple questions about DVD recording. The followings will help you to understand easily how to prepare for DVD recording and to attempt to record. To DVD discs in steps.
Step 1: Choose a disc type
There are several types of DVD disc recordable
for the intension of use. Choose an applicable
type by following “Quick guide to DVD disc
type”.
This DVD recorder can record on the following
type of discs.
For example, when you want to record repeatedly on the same disc, or when you want to edit
the disc after recording, select either the
rewritable DVD-RW type disc.
When you want to save recordings without any
alteration, a non-rewritable DVD-R can be your
choice.
Step 2: Format the disc be
ready for recording
Insert the disc in the recorder. Then, format the
disc from SETUP menu. Video format (Video
mode) or Video recording format (VR mode) will
be available depending on the disc type inserted.
This is necessary to prepare the disc for recording.
When using a DVD-RW
This type of disc can be formatted in either
(Video mode or VR mode). Video mode discs can
be played back on a variety of other DVD equipment. VR mode discs are allowed for more varied editing.
When using a DVD-R
These discs will be formatted in Video mode.
This type of disc can be played back on a variety
of other DVD equipment.
Note:
• You cannot mix two formats in one DVD-RW.
• You can change a DVD-RW’s format to the
other format. However, the disc’s contents will
be lost when reformatting.
• Not all discs can be played on other DVD
equipment.
Now you are ready for recording.
6
E6500UD.QX
03.12.8
19:06
Page 7
Before you start
Step 5: Edit the recorded disc
Record a program by pressing REC button.
When using the timer, one-touch timer recording, manual timer recording are available. Refer to
each page describing the operation for details.
You will find editing discs very easy, and the DVD
recorder offers convenient edit functions, which
are possible only with DVDs.
Before you start
Step 3: Record to DVD discs
You can edit the followings from a
title list.
Step 4: Play the recorded contents
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles (VR mode)
Original and Playlist (VR mode)
You can select the title you want to play from a
displayed menu, and immediately start to play.
Recorded contents are very accessible on a disc,
the procedure is simple really as you choose a
title on a chapter from the menu screen.
What is titles and chapters?
The contents of DVD disc are generally devided
into some titles. Titles may be further subdivided
into chapters.
Start Rec.
Title 1
Stop/Start
Stop Rec.
Title 2
You can edit the recordings in playlist without
changing the original recordings. Any playlist does
not take up much disc space.
What “Original” or “Playlist” refers
for?
Throughut this manual, you will find Original and
Playlist to refer to the actual content and the edited version.
• Original content refers to what’s actually
recorded on the disc.
• Playlist content refers to the edited version of
the disc---how the Original content is to be
played.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
7
E6500UD.QX
03.12.8
19:06
Page 8
Before you start
Guide to Displays
The DVD recorder uses the following types of display for most opertions. SETUP/DISC/CD menu, Title list,
and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you
some disc information for checking the status of the disc.
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by K / L / { / B.
Press ENTER button to display each menu.
These provides entries to all main functions of the DVD recorder.
Setup Menu
Setup
1
2
3
Disc
CD Playback Mode
Edit
Random Playback
Format
Program Playback
Finalize
Disc Protect OFF
4
Setup Menu
Setup Menu
5
6
ON
1 2 3 4
1 2
Playback Setting
1. Playback:
To set up the DVD recorder to
play discs as you prefer.
2. Recording:
To set up the DVD recorder to
record to discs as you prefer.
3. Display:
To set up the OSD screen of the
DVD recorder as you prefer.
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
5. Clock:
To set up the clock of the DVD
recorder as you need.
6. Channel:
To make the channel setting of
the DVD recorder as you
prefer.
8
1. Edit:
Turns on a title list, (When a disc
with VR mode is inserted,
'Original' or 'PlayList' is available.),
which shows the recorded titles
on the disc.
2. Format:
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
3. Finalize:
Allows you to finalize a disc
recorded titles.
4. Disc Protect:
Allows you to protect a titles on
an original list from accidental
editing.
1. Random Playback:
To set the random play programming.
2. Program Playback:
To set the program playing.
E6500UD.QX
03.12.8
19:06
Page 9
Before you start
Title list allows you to check the
titles recorded on the disc easily.
You can choose a title to play
from this screen and can easily
edit the titles as you prefer.
Disc > Original
1
1
2
3
1/JAN AM00:00
1/JAN AM00:00
1/JAN AM00:00
4
5
1/JAN AM00:00
1
1/JAN AM00:00
2
Disc > Original
1
1/JAN AM 1:00 CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect On
XP
0:01:25
3
6
5
4
1. Titles recorded on the disc.
Each can be selected to edit
by pressing ENTER button
with the cursor on the title
2. Protect icon, which appears
when the title has been protected.
3. The selected title thumbnails
from the title list.
4. The menus in here for editing
titles as you prefer. The available menus depends on the
disc type and the format type.
5. The details of the title, which
can be changed to the title
name you will edit.
6. Time status bar of the title,
which can be used to put
chapter marks as you prefer.
DISPLAY
DISPLAY appears by pressing DISPLAY button, then gives you the
information on the disc playing.
And some settings are available
while disc play.
3
1
1
1
00:00:00
DVD-RW
Video Format
SP 1:25
4
2
1. Indicates a disc type and a
format mode.
2. Indicates a recording mode
and possible recoding time.
3. Indicates a title number, chapter number, and the time
lapse of disc play.
4. Each icon means:
: Search
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
9
Before you start
Edit
E6500UD.QX
03.12.8
19:06
Page 10
Before you start
Accessories
You will find the following accessories when
unpacking the carton box.
• Remote control with two AA batteries
(NB001UD)
Installing batteries in the
remote control
You will need to install batteries in the remote control to be ready to use.
1
Unsnap the battery cover from the back of
the remote control.
• RF cable
(WPZ0901TM002)
2
Install two AA batteries making sure the
polarity (+ / –) direction is correct.
• Audio/Video cables
• Owner’s Manual
(0VMN03892)
Owner's Manual
Note:
When replacing batteries, make sure to replace
them in pairs.
3
Snap the battery cover back.
10
E6500UD.QX
03.12.8
19:06
Page 11
Before you start
Information on this owner's
manual
This owner's manual is designed mainly for the
operation of the remote control:
Please read this owner's manual carefully to learn
how to use the features explained through the manual.
Symbol in this owner's manual
Many functions of this DVD recorder are depending
on the disc type or the recording mode.
To specify for what disc type or recording mode
each function is, we put the following symbols at
the beginning of each item to operate.
Symbol
Description
Using a remote control
DVD-V
Available to DVD Video discs
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between
the remote control and the remote sensor on the
DVD recorder.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the DVD recorder.
• Remote controllers for different devices can interfere with each other. Avoid using remotes for
other equipment located close to the DVD
recorder.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
• When the batteries run down or you change the
batteries, the remote control mode and TV preset
code are automatically reset. See page XX to
reset them.
DVD-RW Video
Avaialble to DVD-RW with Video
mode
DVD-RW VR
Avaialble to DVD-RW with VR
mode
DVD-R
Available to DVD-R discs
CD
Available to CD discs
Within
about 7m
REC
REC
MODE
60˚
POW
ER
DISPL
AY
CH
SPEE
PQRS
4
CLEA 7
R
GHI
1
.@/:
2
DEF
5
MNO
8
k
h
REV
CM
TIME
PRO
G. R
ABC
JKL
TUV
SPAC
E
0
E
3
WXY 6
Z
SK
H
9
SKIP
A
D
PAUS
PLA
B Y
IP
P
E
LOS
N/C
OPE
REC
REC
C OR
RENIT
MO
P
U/
MEN AL
GIN
STOC
G
TOP
ORI
g
K
PLA
R
NU
LIS
ME Y
ENTE
D
FW
T
Remote
control
11
Before you start
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of battery together,
although they may look similer, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not
going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
E6500UD.QX
03.12.8
19:06
Page 12
Before you start
Location of controls
Front Panel
1
2 345 6
7
8
13 14 15 11 10
12
1. POWER button
Press to turn the DVD
recorder on and off.
6. CH L / K button
Press to change the channel
up and down.
2. STOP C button
Press to stop play or recording.
7. A (OPEN/CLOSE) button
Press to open or close the
disc tray.
3. REW H button
Press to skip to the previous
chapter or track.
Press and hold for 1.5 seconds to fast reverse.
8. Disc tray
Place a disc when open.
4. PLAY B button
Press to start or resume play.
5. FF G button
Press to skip to the next
chapter or track.
Press and hold for 1.5 seconds to fast forward.
12
9
9. Display
10. REC SPEED button
Press to switch the recording
speed.
11. REC button
Press to start recording.
12. Remote control sensor
Receive signals from your
remote control so that you
can control the DVD
recorder from a distance.
13. S-VIDEO INPUT(LINE2)
Use to connect the S-Video
output of external equipment
with an S-Video cable.
14. VIDEO INPUT(LINE2)
Use to connect external
equipment with a standard
video cable.
15. AUDIO INPUT(LINE2)
Use to connect external
equipment with standard
audio cables.
E6500UD.QX
03.12.8
19:06
Page 13
Before you start
Before you start
Rear Panel
1
2
11
1. AC IN – Power inlet
2. AUDIO OUTPUT 1, 2
Use to connect a TV monitor, AV receiver or other
equipment with standard
audio cables.
3. VIDEO OUTPUT
Use to connect a TV monitor, AV receiver or other
equipment with a standard
video cable.
4. S-VIDEO OUTPUT
Use to connect the S-Video
input of a TV monitor, AV
receiver or other equipment
with an S-Video cable.
3 4
10 9
5. COMPONENT VIDEO
OUTPUT
Use to connect a TV monitor
with component video inputs
with component video cables.
6. TV ANTENNA IN
Use to connect an antenna.
7. TV ANTENNA OUT
Use to connect an antenna
cable to pass the signal from
the TV ANTENNA IN to
your TV monitor.
8. S-VIDEO INPUT(LINE1)
Use to connect the S-Video
output of external equipment
with an S-Video cable.
5
8
6
7
9. VIDEO INPUT(LINE1)
Use to connect external
equipment with a standard
video cable.
10. AUDIO INPUT(LINE1)
Use to connect external
equipment with standard
audio cables.
11. COAXIAL DIGITAL
AUDIO OUTPUT
Use to connect an AV receiver, Dolby Digital decorder or
other equipment with a coaxial digital input with a digital
coaxial cable.
13
E6500UD.QX
03.12.8
19:06
Page 14
Before you start
Remote Control
POWER
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
A
2
3
CH
REC
MONITOR
4
REC SPEED CLEAR
6
8
5
REC
7
PAUSE
H
19
G
20
B
REV
FWD
h
g
21
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
12
14
18
PLAY
11
13
16
17
SKIP
k
9
10
OPEN/CLOSE
DISPLAY
22
K
ENTER
REPEAT
{
B
1. POWER button
Press to turn the DVD
recorder on and off.
2. DISPLAY button
Press to display or change the
on-screen display.
3. CH K / L button
Press to change the channel
up and down.
4. REC MONITOR button
Press to check the video to be
recorded before attempting.
5. REC SPEED button
Press to switch the recording
speed.
6. CLEAR button
Press to clear the password
once entered or to cancel the
programming for CD or to
clear chapter search function.
14
23
RETURN
ZOOM
15
24
L
25
7. REC button
Press to start recording.
8. PAUSE F button
Press to pause play or
recording.
9. PLAY B button
Press to start or resume play.
10. REV E button
During play, press to play fast
reverse.
Or during play is paused,
press to play slow reverse.
11. STOP C button
Press to stop play or recording.
12. SETUP button
Press to display the setup
menu.
13. TOPMENU button
Press to display the top
menu.
14. REPEAT button
Press to repeat play.
15. ZOOM button
Press to enlarge the picture
on the screen.
16. OPEN/CLOSE A button
Press to open or close the
disc tray.
17. TIMER PROG. button
Press to display the timer
program setting menu.
18. Number buttons
Press to select a title/chapter/track on display or a TV
channel.
Or press to enter values for
the settings in the SETUP
menu.
19. CM SKIP button
Press to skip the 30 sec.
20. SKIP H button
During play, press to skip to
the previous chapter or track.
Or during play is paused, press
to play reverse step by step.
SKIP G button
During play, press to skip to
the next chapter or track.
Or during play is paused, press
to play forward step by step.
21. FWD D button
During playback, press to play
fast forward.
Or during play is paused,
press to play slow forward.
22. MENU ORG/PL button
Press to display the Play List.
23. ENTER button
Press to confirm or select
menu items.
24. K / L / B / { buttons
Press to move the cursor
around the screen.
25. RETURN
button
Press to return to the previously displayed menu screen.
E6500UD.QX
03.12.8
19:06
Page 15
Before you start
Front display
Before you start
4
2
1
3
6
5
1. Current status of the
DVD recorder
2. Disc type
: Appears when CD is
inserted in the disc tray.
: Appears when a disc play
is paused.
: Appears when indicating a title/track number.
: Appears when DVD is
inserted in the disc tray.
: Appears during playing a
disc.
: Appears when DVD-R
is inserted in the disc
tray.
: Appears when the timer
programming has been
made and is proceeding.
: Appears when DVDRW is inserted in the
disc tray.
: Appears during recording is in proceed.
:Appears during repeat
play.
4. Title/Track and Chapter
mark
3. Recording speed
Indicates the recording speed of
the disc.
: Appears when indicating a chapter number.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
6.
: Appears in the afternoon with the clock
displaying.
Display message
1
2
4
5
1. Appears when the DVD
recorder is powered on.
2. Appears when the DVD
recorder is powered off.
3. Appears when the disc tray is
opening or open.
3
6
4. Appears when the disc tray is
closing or close.
5. Appears when a disc is loading or loaded in the disc tray.
6. Appears when recording data
is writing on to the disc.
15
E6500UD.QX
03.12.8
19:06
Page 16
Connections
Use a standard antenna cable to connect the wall jack to the TV ANTENNA IN jack on the DVD recorder.
Connection to antenna
Note:
Antenna and antenna cable are not included.
1
Antenna
TV
VHF/UHF
IN
Use a standard antenna cable
to connect the wall jack to
the TV ANTENNA IN jack
on the DVD recorder.
1
antenna
cable
ANT.
IN
DVD Recorder
ANT.
OUT
2 RF cable (supplied)
2
Use a standard antenna cable
to connect the TV ANTENNA OUT jack on the DVD
recorder to the antenna
input jack on the TV.
: signal flow
When connecting to a cable box with only a few
scrambled channels
If you are using a cable box or satellite receiver with only a few
scrambled channels, follow the setup on this page. If many or all the
channels are scrambled, we recommend using the setup on the following page.
Note:
Antenna and antenna cable are not included.
A piece of RF cable is included.
TV
To Antenna
VHF/UHF
IN
1
1
RF
cable
VHF/UHF
OUT
: signal flow
16
ANT.
IN
DVD Recorder
Cable
box
antenna
cable
1 RF cable (supplied)
VHF/UHF
IN
ANT.
OUT
With this setup:
• You can record any non-scrambled channel by selecting the
channel on the DVD recorder.
• You cannot record scrambled
channels that require a cable
box.
1
Use a standard antenna cable
as shown.
Note to the Cable TV
System Installer :
This reminder is provided to
call the Cable TV system
installer’s attention to Article
820-40 of the National
Electrical Code, which
provides guidelines for proper
grounding - in particular,
specifying that the cable
ground shall be connected to
the grounding system of the
building, as close to the point
of cable entry as possible.
E6500UD.QX
03.12.8
19:06
Page 17
Connections
When connecting to a cable box with many scrambled channels
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
Note:
Antenna and antenna cable are not included.
A piece of RF cable is included.
To Antenna
TV
1
antenna
cable
1
RF
cable
1
Use a standard antenna cable
as shown.
VHF/UHF
IN
Cable
box
VHF/UHF
OUT
DVD Recorder
1 RF cable (supplied)
ANT.
IN
ANT.
OUT
: signal flow
17
Connections
VHF/UHF
IN
With this setup:
• You can record any unscrambled channel by selecting the
channel on the cable box. Be
sure that the cable box is
turned on.
• You cannot record one channel
while watching another channel.
E6500UD.QX
03.12.8
19:06
Page 18
Connections
Connection to other devices
There will be various ways of connecting the DVD recorder to other devices. Make your connection
according to your choice of devices, screen format, and sound format.
You will find some sample connections in the following pages.
Note:
• All jack on the DVD recorder will not need to connected.
• When you change the connections, all devices should be turned off.
• Refer to each owner's manual for further information on other devices.
Connection to TV with a standard A/V cable
Note:
Antenna and antenna cable are not included.
A/V
IN 1
VHF/UHF
IN
1
: signal flow
A/V
cable
(supplied)
antenna
cable
AUDIO/VIDEO
OUTPUT
ANT.
IN
RF cable (supplied)
ANT.
OUT
DVD Recorder
18
Use a standard A/V cable to
connect the AUDIO OUTPUT(L/R) and VIDEO OUTPUT jacks on the DVD
recorder to the audio and
video input jacks on the TV.
Antenna
TV
1
E6500UD.QX
03.12.8
19:06
Page 19
Connections
1
Connection to TV with a S-Video cable
Note:
S-video cable is not included.
TV
Use a S-Video cable to connect the S-VIDEO OUTPUT
jack on the DVD recorder to
the S-Video input jack on the
TV.
S-VIDEO
INPUT
2
1
S-Video
cable
Use a standard audio cable to
connect the AUDIO OUTPUT(L/R) on the DVD
recorder to the audio input
jacks on the TV.
A/V
cable
2
(supplied)
AUDIO/VIDEO
OUTPUT
S-VIDEO
OUTPUT
DVD Recorder
: signal flow
Connection to TV with a component video cable
Note:
Component video cable is not included.
TV
1
Use a component video cable
to connect the COMPONENT VIDEO OUTPUT
jacks on the DVD recorder to
the component input jacks
on the TV.
COMPONENT
VIDEO IN
2
A/V
IN 1
1
component
video cable
A/V
2
cable
(supplied)
AUDIO/VIDEO
OUTPUT
Use a standard audio cable to
connect the AUDIO OUTPUT(L/R) on the DVD
recorder to the audio input
jacks on the TV.
COMPONENT
VIDEO OUT
DVD Recorder
: signal flow
19
Connections
A/V
IN 1
E6500UD.QX
03.12.8
19:06
Page 20
Connections
1
Connection to TV and VCR
Note:
Antenna and antenna cable are not included.
A piece of Audio/Video cable and RF cable are included.
Use standard antenna cables
to connect the DVD recorder
and the VCR from the wall
jack socket as shown.
Antenna
TV
A/V
IN 1
VHF/UHF
IN
2
Use a standard A/V cable to
connect the AUDIO OUTPUT and VIDEO OUTPUT
jacks on the DVD recorder to
the audio and video input
jacks on the TV.
A/V
IN 2
1
RF
cable
A/V
3 cable
VCR
VHF/UHF
OUT
2
A/V
cable
(supplied)
A/V
OUT
antenna
cable
VHF/UHF
IN
AUDIO/VIDEO
OUTPUT
DVD Recorder
1 RF cable (supplied)
: signal flow
20
1
ANT.
IN
ANT.
OUT
3
Use a standard A/V cable to
connect the audio and video
output jacks on the VCR to
the audio and video input
jacks on the TV.
E6500UD.QX
03.12.8
19:06
Page 21
Connections
Connection to AV amplifier with a coaxial digital
audio cable
Note:
Antenna, antenna cable, and coaxial digital audio cable are not included.
A piece of Audio/Video cable is included.
Antenna
TV
VHF/UHF
IN
Use a coaxial digital audio
cable to connect the COAXIAL DIGITAL AUDIO OUTPUT jack on the DVD
recorder to the coaxial digital audio input jack on the
AV ampifier.
2
Use a standard AV cable to
connect the AUDIO OUTPUT and VIDEO OUTPUT
jacks on the DVD recorder to
the audio and video input
jacks on the AV amplifier.
3
VIDEO
IN
Connect the AV receiver’s
video output to a video input
on your TV.
A/V
3 cable
AV
amplifier
VIDEO
OUT
A/V
IN 1
antenna
cable
DIGITAL
IN
COAXIAL
2
Front (L)
Center
Front (R)
Rear (L)
Subwoofer
Rear (R)
A/V
cable
(supplied)
AUDIO
/VIDEO
OUTPUT
DVD Recorder
1 coaxial digital audio cable
DIGITAL OUT
COAXIAL
ANT.
IN
ANT.
OUT
RF cable (supplied)
: signal flow
21
Connections
To enjoy multichannel surround sound you need to connect this
recorder to an AV amplifier/receiver using the coaxial output.
In addition to a digital connection, we recommend also connecting
using the stereo analog connection.
You'll probably also want to connect a video output to your AV
amplifier/receiver. Use the standard (composite) video output (as
shown here), or the S-Video or component video connections.
Refer to your AV amplifier/receiver owner's manual for further information.
1
E6500UD.QX
03.12.8
19:06
Page 22
Getting started
Switching on
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
1
Press POWER button on the
remote control or the front
panel of the DVD recorder.
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
{
B
RETURN
ZOOM
L
22
2
ENTER
REPEAT
Turn the TV on and be sure
to select the input to which
the DVD recorder is connected.
Initial setting:
Channel setting
All channel is stored in the DVD
recorder when purchased. We
recommend that you get available
channels in your area stored using
“Auto Preset” in Setup menu.
If there are any channels you will
not need, you will be able to
remove the channels using
“Manual Preset” in the menu.
E6500UD.QX
03.12.8
19:06
Page 23
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
Getting channels automatically
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The DVD recorder will start getting channels available in your
area.
0
REC
PAUSE
CH 18
SKIP
k
H
G
Auto Presetting Now
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Setup Menu
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Note:
• If the auto presetting is cancelled during presetting, some
channels not yet preset may not
be received.
• The selection will depend on
how you receive the TV channels.
5
Playback Setting
Press SETUP button to exit
SETUP menu.
3
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
Auto Preset
Manual Preset
TV Audio Select
Stereo
23
Getting started
To cancel the auto presetting
during scanning:
Press RETURN button or SETUP
button to cancel.
K
E6500UD.QX
03.12.8
19:06
Page 24
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
Adding/deleting channels
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
Setup > Channel Preset > Manual Preset
CH2
Add
Delete
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
5
Setup Menu
K
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
Setup > Channel Preset > Manual Preset
Setup
CH18
Add
Delete
Playback Setting
6
3
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
Auto Preset
Manual Preset
TV Audio Select
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from a channel
memory. Then a next channel
number will appear so that you
can continue adding or deleting
channels.
Stereo
7
Press SETUP button to exit
SETUP menu.
24
E6500UD.QX
03.12.8
19:06
Page 25
Getting started
Initial setting: Clock
POWER
TIMER
PROG.
DISPLAY
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
3
OPEN/CLOSE
G
You will need to set the clock
before you try the timer recording features. Set the clock using
this menu, and we recommend to
set the auto clock setting to
AUTO to use the clock function
effectively.
Yon can set the daylight savings
time depending on whether or
not currently observing the daylight savings time.
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
B
PLAY
REV
FWD
g
h
Setting the clock
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
4
1
{
B
RETURN
ZOOM
L
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
---/--/----(---)
--:--
Setup Menu
2
5
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select the date (month / day
/ year) using K / L buttons,
then press ENTER button.
A cursor will move on the
month.
Setup
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
JAN / - - / - - - - ( - - - )
--:--
Playback Setting
25
Getting started
ENTER
REPEAT
E6500UD.QX
03.12.8
19:06
Page 26
Getting started
POWER
TIMER
PROG.
DISPLAY
6
9
Enter the date (month / day /
year) using K / L buttons,
then press ENTER button.
Every time you enter a number,
press { / B button to move the
cursor.
Press K / L buttons to select
AM or PM, then press
ENTER button.
Clock menu will appear, then the
settings will be activated.
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
Setup > Clock
CM SKIP
REC MODE CLEAR
REC
PAUSE
Clock Setting
SKIP
k
H
Clock Setting
Setup > Clock
0
Auto Clock Setting
OFF
Daylight Saving Time
ON
Auto Clock Setting
OFF
Daylight Saving Time
ON
G
JAN / 12 / - - - - ( - - - )
--:--
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
10
K
7
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select the time using K / L
buttons, then press ENTER
button.
A cursor will move on hour.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : - - AM
8
Enter the time (hour /
minute) using K / L buttons,
then press { / B button.
A cursor will move on AM or PM.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : 24 AM
26
Press SETUP button to exit
SETUP menu.
E6500UD.QX
03.12.8
19:06
Page 27
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
Adjusting the clock
automatically
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
0
REC
PAUSE
OFF
Auto
Auto
Manual
Off
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
5
Setup Menu
K
{
B
RETURN
ZOOM
2
L
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select “Auto” using K / L
buttons, then press ENTER
button.
“OFF” has been selected as the
default.
We recommend to set the auto
clock setting to “Auto” to use the
clock function effectively.
Setup
6
Press SETUP button to exit
SETUP menu.
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
27
Getting started
ENTER
REPEAT
E6500UD.QX
03.12.8
19:06
Page 28
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
Setting the daylight savings time
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
Setup > Clock
Clock Setting
0
REC
PAUSE
Auto Clock Setting
Daylight Saving Time
SKIP
k
H
G
OFF
ON
OFF
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Setup Menu
5
K
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight savings
time.
6
Setup
Press SETUP button to exit
SETUP menu.
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Clock Setting
28
Auto Clock Setting
OFF
Daylight Saving Time
ON
E6500UD.QX
03.12.8
19:06
Page 29
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
Initial setting:
Selecting the TV
aspect ratio
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
1
3
2
CH
4
6
5
REC
MONITOR
7
9
8
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
You can select the TV aspect
ratio to match the formats of
what you are playing with the
DVD recorder and your TV
screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected as the default.
B
PLAY
REV
FWD
g
h
STOP
1
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
{
B
RETURN
ZOOM
Subtitle Language
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
L
Subtitle Language
Getting started
ENTER
REPEAT
Audio Language
4:3 Letter Box
All
English
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
5
Setup Menu
Select a desired option using
K / L buttons, then press
ENTER button.
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
16:9 Wide:
Choose when you have a
widescreen TV.
4:3 Letter Box, 4:3 Pan &
Scan:
Choose one depending on which
you will prefer to watch when
you have a standard TV.
Note:
Refer to page xx for more information.
3
6
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Press SETUP button to exit
SETUP menu.
29
E6500UD.QX
03.12.8
19:06
Page 30
Getting started
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
You can watch the TV programs
from the tuner of the DVD
recorder. To do this, be sure to
make connections from the DVD
recorder (TV ANTENNA OUT
jack) to your TV (an antenna
input jack) with an antenna cable.
Refer to page 16.
With the correct connection, the
RF converter is ON after the
DVD recorder is turned on.
RETURN
ZOOM
Screen:
RF Output
CH 3
9
CM SKIP
REC MODE CLEAR
Initial setting:
RF converter output
(Watching the TV
programs received
by the tuner of the
DVD recorder)
RF Output
CH 4
Front display:
L
To change the channel for RF
converter:
Press CLEAR button more
than 3 seconds.
A channel for RF converter will
change between 3CH and 4CH at
3 seconds.
Remote:
CLEAR
RF ON
more than
3 sec.
3 sec.
CH 3CH
3 sec.
4CH
3 sec.
3CH
3 sec.
30
To cancel the RF converter:
Make one push of CLEAR
button (Within 3 seconds).
E6500UD.QX
03.12.8
19:06
Page 31
Getting started
Getting started
31
E6500UD.QX
03.12.8
19:06
Page 32
Recording
Information on DVD recording
DVD-RW
DVD-R
This DVD recorder can record to DVD-R and
DVD-RW discs. When recording, you will need to
select a recording format between Video mode and
VR mode depending on the disc format. The disc
format for DVD-R is always “Video format,” then a
recording format will be “Video mode,” so that you
can play these discs, which are once finalized, in a
regular DVD player.
On the other hand, when recording to DVD-RW, a
recording format will be “Video mode” or “VR
mode” because a disc format is available between
“Video Recording format” and “Video format” for
DVD-RW.
Logo
Attributes
12cm, single-sided, single layer disc
Approx. max. recording time (SEP
mode): 600 minutes (4.7GB)
Note:
• This recorder cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded using a
personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty, or if
there is dirt of condensation on the player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format, there
are cases in which it may not play because of the
settings of the application software used to create
the disc. (Check with the software publisher for
more detailed information.)
Disc type
Disc format
Functions
DVD-RW
VR mode
Playing, limited
recording, limited editing
DVD-RW Video
Video mode
DVD-RW VR
DVD-R
32
Video mode
You can select a recording speed among 6 options,
and the recoding time will depend on the recording
speed you select as follows.
Recording speed
XP
SP
LP
EP
SLP
SEP
12cm, single-sided, single layer disc
Approx. max. recording time (SEP
DVD-RW mode): 600 minutes (4.7GB)
DVD-R
Recording speed
Playing, recording,
Original/Playlist editing
Playing, limited
recording, limited editing
Recording time
60 min
120 min
240 min
360 min
480 min
600 min
Restrictions on recording
You cannot record copy-protected video using this
DVD recorder. Copy-protected video includes
DVD-Video discs and some satellite broadcasts. If
copy-protected material is encountered during a
recording, recording will pause or stop automatically and an error message will be dispayed on-screen.
Video that is “copy-once only” can only be recorded using a DVD-RW disc in VR mode with CPRM
(see below).
When recording a TV broadcast or throgh an
external input, you can display copy control information on screen. (see page xx).
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This DVD recorder is CPRM compatible, which
means that you can record copy-once broadcast programs, but you cannot then make a
copy of those recordings. CPRM recordings
can only be made on DVD-RW discs formatted
in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with CPRM.
E6500UD.QX
03.12.8
19:06
Page 33
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Settings for recording to a blank disc
DVD-RW
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
When inserting a blank disc, the
DVD recorder starts to initialize
the blank disc.
After that, you can record to the
disc with the recording format
selected in SETUP menu.
You are allowed to set a specified
time for chapter marks.
When setting a blank DVD+R or
DVD+RW disc, this message will
appear.
MENU
PLAY LIST
TOP MENU/
ORIGINAL
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
K
Recording Error
ENTER
REPEAT
{
B
RETURN
ZOOM
Can not record on this disc.
L
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
1
Video mode
OFF
Timer Programing
Recording
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup Menu
Setup > Recording
DVD-RW Recording Format Video
Video mode
mode
VR
mode
Auto Chapter
OFF
Timer Programing
Video mode has been selected as
the default.
33
E6500UD.QX
03.12.8
19:06
Page 34
Recording
5
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
DVD-RW
Select “Video” or “VR” using
K / L buttons, then press
ENTER button.
The recording mode will be set.
6
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
FWD
h
g
STOP
Setup > Recording
C
SETUP
Formatting a disc
MENU
PLAY LIST
TOP MENU/
ORIGINAL
DVD-RW Recording Format
Auto Chapter
K
Timer Programing
ENTER
REPEAT
{
B
Video mode
OFF
5 minutes
OFF
10 minutes
15 minutes
30 minutes
60 minutes
RETURN
ZOOM
If you are recording on a DVD-R
disc, the recording mode will
always be Video mode.
If you are using a DVD-RW disc,
by default it will be Video mode.
You can change this to VR mode
from SETUP menu.
Note1:
When reformatting, the contents
of the disc will be erased.
Note2:
Be sure to select a recording format in SETUP menu for a DVDRW disc before you attempt to
format.
Refer to page xx “Settings for
recording to a blank disc.”
L
“OFF” has been selected as the
default.
7
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will put as you
specified.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
8
Press SETUP button to exit
SETUP menu.
Setup Menu
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
34
E6500UD.QX
03.12.8
19:06
Page 35
Recording
<Video mode>
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
<Video mode>
Disc
Disc
Edit
Edit
Format
Format
Finalize
Finalize
3
2
Yes
4
5
7
8
No
Are you sure?
Yes
No
CH
6
REC
MONITOR
9
<VR mode>
CM SKIP
REC MODE CLEAR
<VR mode>
0
REC
PAUSE
SKIP
k
H
G
Disc
Disc
Edit
Edit
Format
Format
Finalize
B
Finalize
Disc Protect OFF
PLAY
REV
FWD
h
g
ON
Disc Protect OFF
Yes
STOP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
No
Are you sure?
Yes
No
C
SETUP
ON
K
ENTER
REPEAT
{
B
RETURN
ZOOM
3
5
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
<Video mode>
Select “Yes” using { / B
buttons, then press ENTER
button.
Formatting will start.
L
Recording
Disc
Edit
Format
Finalize
Yes
No
58%
Formatting
6
<VR mode>
Disc
Formatting is complete.
100% will be indicated.
Edit
Format
Finalize
Disc Protect OFF
Yes
ON
No
4
Select “Yes” using { / B
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Press SETUP button to exit
DISC menu.
35
E6500UD.QX
03.12.8
19:06
Page 36
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Recording from the
TV
DVD-RW
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
Follow the steps below to record
TV programs. Recording starts
immediately and continues until
the disc is full or you stop
recording.
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
Note:
When the clock setting has not
been made, title names in the
original or playlist will be blank.
FWD
g
h
STOP
Disc > Edit
C
SETUP
DVD-R
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to page XX
“Settings for recording to a blank
disc.”
Note:
You cannot mix two formats on
one DVD-RW disc.
When you load a disc once
recorded before, the recording
format cannot be changed even
you change it in SETUP menu.
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
1
2
3
K
ENTER
REPEAT
{
B
RETURN
ZOOM
1
L
When a DVD-R disc is
loaded:
DVD-R discs will always be in
Video mode.
4
Select a desired channel to
record using CH K / L buttons or number buttons.
1
Turn on the DVD recorder
and load a recordable disc.
Make sure that the TV input is
set to the DVD recorder.
The DVD recorder will require
for a while to initialize the disc.
5
Press REC button to start
recording.
REC mark will be displayed for 5
seconds.
2
Select a recording speed
using REC SPEED button.
Refer to page XX “Recording
speed.”
3
Format a disc.
Refer to page xx “Formatting a
disc.”
36
I
To pause the recording, press
PAUSE F button. Press REC button to restart the recording.
To stop the recording, press
STOP C button.
E6500UD.QX
03.12.8
19:06
Page 37
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
One-touch timer
recording
Checking the recording picture quality
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
You can confirm the recording
picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
If the picture quality selected is
not prefered, you can change the
recording speed by pressing REC
SPEED button.
This is available while the DVD
recorder is in STOP, REC, or
REC pause with a DVD disc to
record inserted.
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
1
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
Select a desired channel to
record using CH K / L buttons or number buttons.
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
I
0:30
When reaches the specified time,
the DVD recorder will be turned
off automatically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
Note:
The DVD recorder will be turned
off automatically under the conditions following.
• No space remained on the disc.
• When a power failure occurs.
1
While the DVD recorder is in
STOP, REC, or REC pause
with a DVD disc to record
inserted, press REC MONITOR button.
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
CH 18
Rec Monitor
XP
37
Recording
Press REC button on the
remote control or the front
panel, then press REC button
repeatedly until a desired
recording time (30 minutes
to 4 hours) appears on the
TV screen.
Recording will start.
Note:
You cannot check the recording
sound with the Rec monitor function.
The picture in the Rec monitor
will be delayed than the sound.
And the sound you will hear in
the Rec monitor mode is not the
same as recorded to be.
E6500UD.QX
03.12.8
19:06
Page 38
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
If you want to change thte
recording speed, press REC
SPEED button repeatedly.
The recording speed will be change
as you press the button as shown.
3
2
XP
CH
4
5
7
8
6
SP
SEP
LP
SLP
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
EP
0
REC
PAUSE
SKIP
k
H
G
2
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Press REC MONITOR button
again to exit.
Finalizing the discs
DVD-RW
DVD-R
You will need to finalize the discs
recorded in Video mode to play
in other DVD players.
Finalizing discs in Video mode
automatically creates title menus.
Note:
Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything
else on that disc.
A VR mode disc can still be
recorded and edited on this
recorder even after finalizing.
K
Video mode:
ENTER
REPEAT
{
B
RETURN
ZOOM
1
L
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup Menu
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Disc
Edit
Format
Finalize
38
38
E6500UD.QX
03.12.8
19:06
Page 39
Recording
3
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
CH
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
5
Finalizing is complete.
REC
MONITOR
Disc
7
9
8
Edit
CM SKIP
REC MODE CLEAR
Format
0
REC
When selecting “No” and press
ENTER or RETURN button, finalizing will be continued.
PAUSE
Finalize
Yes
SKIP
k
H
No
G
100%
B
PLAY
REV
FWD
h
g
Finalizing
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Press SETUP button to exit
DISC menu.
4
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select “Yes” using { / B
buttons, then press ENTER
button.
Finalizing will start.
Recording
58%
Finalizing
To cancel finalizing, press STOP
C button.
Do you want to cancel?
Yes
No
58%
Finalizing
Select “Yes,” then press
ENTER button.
Finalizing is cancelled, then the
DVD recorder will be in stop
mode.
Note:
If
appear when pressing
STOP button, you can not cancel
finalizing because the finalizing has
been in certain progress.
39
E6500UD.QX
03.12.8
19:06
Page 40
Recording
4
VR mode:
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
1
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Yes” using { / B
buttons, then press ENTER
button.
Finalizing will start.
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
58%
Finalizing
B
PLAY
REV
Setup Menu
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
To cancel finalizing, press STOP
C button.
2
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Do you want to cancel?
Yes
No
58%
Finalizing
Disc
Edit
Select “Yes,” then press
ENTER button.
Finalizing is cancelled, then the
DVD recorder will be in stop
mode.
Format
Finalize
Disc Protect OFF
ON
Note:
3
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
Disc
Edit
Format
Finalize
Disc Protect OFF
Yes
40
ON
No
If
appear when pressing
STOP button, you can not cancel
finalizing because the finalizing has
been in certain progress.
When selecting “No” and press
ENTER or RETURN button, finalizing will be continued.
E6500UD.QX
03.12.8
19:06
Page 41
Recording
5
POWER
TIMER
PROG.
DISPLAY
Timer recording
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
DVD-RW
Finalizing is complete.
You can program the unit to
record up to 8 programs, up to a
year in advance. Daily or weekly
program recordings are also available.
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
DVD-R
100%
Finalizing
1
SKIP
k
H
G
B
PLAY
REV
FWD
Press SETUP button to exit
DISC menu.
Press TIMER PROG. button.
Timer Programming list will
appear.
g
h
STOP
Setup > Recording > Timer Programing
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Date
1. - - 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Start
End
CH
Speed
Recording
If you have not made the
clock setting yet:
A clock setting window will
appear after pressing TIMER
PROG. button.
Setup > Clock
Clock Setting
Auto Clock Setting
OFF
Daylight Saving Time
ON
---/--/----(---)
--:--
Be sure to set the clock following
step 4 through step 10 in “Initial
setting: Clock” on page 25 and 26
before making a timer program.
2
Enter the necessary information for timer programming
using K / L / { / B buttons,
then press ENTER button.
41
E6500UD.QX
03.12.8
19:06
Page 42
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
K / L buttons:
change the setting at the current
cursor position.
{ / B buttons:
move the cursor to the left and
the right.
Speed:
Select a recording speed among
XP, SP, LP, EP, SLP, and SEP.
Refer to page XX “Recording
speed.”
Setup > Recording > Timer Programming
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
Setup > Recording > Timer Programming
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
Date
Start
1. JAN/12 10:00PM
2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
Date:
Enter the date.
{
B
Date
Start
1. JAN / 1 - - : - -AM
2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
End
CH
- - : - -AM CH8
Speed
L
Speed
XP
3
When entering “Date”, you can
select a daily or weekly programming.
RETURN
ZOOM
End
CH
10:30PM CH8
Start / End:
Enter the time to start and to
end.
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
4
Setup > Recording > Timer Programming
Date
Start
1. JAN/12 10 :00PM
2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
End
CH
- - : - -AM CH8
Speed
CH:
Select the channel to record.
You can select a channel among
those stored in the DVD
recorder with the channel presetting, L1, and L2 (Video IN).
Setup > Recording > Timer Programming
Date
Start
1. JAN/12 10:00PM
2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
42
End
CH
10:30PM CH8
Speed
Press POWER button to turn
the DVD recorder off.
(Timer icon) will appear on
the front display.
The DVD recorder will be turned
on automatically 2 minutes in
advance of the recording time to
start and waits to start.
Then the recording will start at
the recording time you set.
Note:
To stop the timer recording in
proceed, press STOP C button
on the front panel. STOP C button on the remote control is not
effective.
Neither POWER button nor
OPEN/CLOSE button is effective.
E6500UD.QX
03.12.8
19:06
Page 43
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
Checking the imformation on the timer
programming during
the timer recording
CH
DVD-RW
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
DVD-R
You are allowed to know the
imformation on the timer programming during the timer
recording.
SKIP
k
H
G
1
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
During the timer recording,
press TIMER PROG. button.
Timer Programming list will
appear.
B
Setup > Recording > Timer Programming
RETURN
ZOOM
Date
Start
1. JAN/12 10:00PM
2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - -
L
End
CH
10:30PM CH8
Speed
XP
Recording
2
Check the end time on the
list.
3
To exit the timer programming list, press TIMER
PROG. button again after
you check the imformation.
43
E6500UD.QX
03.12.8
19:06
Page 44
Recording
The priority of overlapped setings
DVD-RW
DVD-R
The recorder records the programs according to priority if the timer settings overlap. The timer setting set
previously has priority.
If the timer settings overlap, the program that has priority will be recorded. A timer recording of lower priority will be canceled, start from the middle, or stop on the way.
Check the overlapped timer settings and change the priority if necessary.
When the starting time is same:
A smaller program number PROG. 1 has priority.
ex.1
ex. 2
PROG. 1
PROG. 1
PROG. 2
PROG. 2
PROG. 3
Actual
recording
PROG. 1
PROG. 2
Actual
recording
PROG. 1
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
PROG. 1
When the recording time is entirely overlapped:
PROG. 1 will not be recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
When the end time of one and the starting time of another are same:
The first 30 minutes of the following one will be cut off.
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
The first 30 minutes will be cut off.
44
PROG. 2
E6500UD.QX
03.12.8
19:06
Page 45
Recording
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Setting a disc to protect
DVD-RW VR
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
Disc
Edit
1
Format
Finalize
Disc Protect OFF
PAUSE
ON
SKIP
k
H
B
FWD
h
Yes
G
PLAY
REV
g
STOP
C
SETUP
To prevent accidental recording,
editing, or erasing the titles, you
can protect them from DISC
menu.
3
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
MENU
PLAY LIST
TOP MENU/
ORIGINAL
No
4
K
ENTER
REPEAT
{
Select “Yes” using { / B
buttons, then press ENTER
button.
A disc will be protected.
B
RETURN
ZOOM
L
Setup Menu
Disc
Edit
2
Format
Finalize
Disc Protect ON
Recording
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
OFF
5
Disc
Edit
Format
Finalize
Disc Protect OFF
ON
Press SETUP button to exit
DISC menu.
45
E6500UD.QX
03.12.8
19:06
Page 46
Recording
Recording from an external component
DVD-RW
DVD-R
You can record from an external component, such
as a camcorder or VCR, connected to either LINE1
or LINE2 for external inputs.
2.
Press SETUP button to display SETUP/DISC
menu.
Before attempting to record from an
external component:
3.
Select SETUP, then press ENTER button.
1.
Connect the component from which you
want to record properly to the DVD
recorder.
External equipment
(VCR camcorder etc.)
4.
Select “Select Video,” then press ENTER
button.
Setup > Select Video
L1 (Rear)
Video In
L2 (Front)
Video In
OUTPUT
S VIDEO
VIDEO AUDIO
L
R
5.
Select an input line among L1 and L2.
S-Video
cable
or
A/V
cable
Setup > Select Video
L1 (Rear)
L2 (Front)
To LINE 2 IN
DVD recorder
rear of DVD recorder
Video
Video
In In
S-Video
Video In
6.
Select the input jack type to connect, then
press ENTER button.
Setup > Select Video
L1 (Rear)
S-Video In
L2 (Front)
Video In
To LINE 1 IN
External equipment
(VCR camcorder etc.)
: signal flow
46
Now you are ready to start recording from external component.
E6500UD.QX
03.12.8
19:06
Page 47
Recording
POWER
TIMER
PROG.
DISPLAY
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
7
Connect the component
from which you want to
record properly to the DVD
recorder.
Load the cassette tape to the
component to record from,
then set it in pause.
8
2
CM SKIP
REC MODE CLEAR
0
REC
1
OPEN/CLOSE
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
Turn the TV and the DVD
recorder on, and be sure to
select the input of the TV to
which the DVD recorder is
connected.
STOP
9
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
3
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Press PAUSE F button and
REC button to set the DVD
recorder in REC pause at the
same time.
Recording will start.
Press OPEN/CLOSE A button to open the disc tray,
then place the disc to record
properly.
Press STOP C button on the
DVD recorder to stop
recording.
4
Recording
Select the input of the DVD
recorder which the component to record from is connected.
5
Select a recording mode
using REC SPEED button.
Refer to page XX “Recording
speed.”
XP
SP
SEP
LP
SLP
EP
6
Press PAUSE F button to
pause recording.
47
E6500UD.QX
03.12.8
19:06
Page 48
Playing discs
Information on DVD play
Before you attempt to play DVD discs, read the following information.
Playable discs
Region codes
This DVD recorder is compatible to play the following discs.
To play a DVD, make it meets the requirements for
Region Codes and Color Systems as described
below. Discs that have the following logos will play
on the DVD recorder. Other Disc types are not
guaranteed to play.
This System has a Region One (1) the DVD
recorder. DVDs must be labeled for ALL regions
or for Region 1 in order to play on the the DVD
recorder. You cannot play DVDs that are labeled
for other regions. Look for the symbols below on
your DVDs. If these region symbols do not appear
on your DVD, you cannot play the DVD in this the
DVD recorder.
Disc
Logo
DVD VIDEO
CD-DA (AUDIO CD)
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, upper regions of North America, Bermuda,
the U.S.Virgin Islands, and small regions near
Australia.
A DVD labeled for a specific region can only play
on the DVD recorder with the same region code.
CD-R (CD-DA FORMAT)
Color systems
DVD-RW (VIDEO/VR FORMAT)
DVD-R (VIDEO FORMAT)
CD-RW (CD-DA FORMAT)
48
DVDs are recorded in different color systems
throughout the world. The most common color
systems are NTSC (which is used primarily in the
United States and North America), PAL, and
SECAM.
This DVD Player uses NTSC, so DVDs you play
must be recorded in the NTSC system. You cannot
play DVDs recorded in other formats. The color
system of the DVD may on the DVD or on the
Disc case.
E6500UD.QX
03.12.8
19:07
Page 49
Playing discs
4
Basic Play
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
DVD-RW
DVD-R
1
Press POWER button on the
remote control or the front
panel of the DVD recorder.
When you are playing a DVD,
turn the TV on and be sure to
select the input to which the
DVD recorder is connected.
Press TOP MENU/ORIGINAL button to display the
title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU PLAY LIST.
Video mode:
Titlelist
2
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
5
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
JAN/1 1:00AM
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
JAN/1 1:00AM
VR mode:
RETURN
ZOOM
L
3
Original
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
5
JAN/1 1:00AM
Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
5
disc tray guide
JAN/1 1:00AM
JAN/1 1:00AM
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playing will start.
49
Playing discs
5
E6500UD.QX
03.12.8
19:07
Page 50
Playing discs
6
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
B
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Note:
You can resume play from where
you stopped playing the disc.
(Resume play)
Refer to page XX for details
about resume play.
CD
1
Press POWER button on the
remote control or the front
panel of the DVD recorder.
When you are playing a DVD,
turn the TV on and be sure to
select the input to which the
DVD recorder is connected.
G
PLAY
REV
Press STOP C button to stop
play.
DVD-V
K
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the
disc before turn the DVD
recorder off.
2
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
ENTER
REPEAT
{
B
RETURN
ZOOM
3
L
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
4
Press PLAY B button to
start playing.
Playing will start.
If you are playing a DVD-Video
disc, a menu may appear.
Refer to page XX for details
about a disc menu.
5
Press STOP C button to stop
playing.
50
E6500UD.QX
03.12.8
19:07
Page 51
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Playing discs using
the disc menu
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter selection.
Sometimes these are displayed
automatically when you start
playback, otherwise only appear
when you press MENU PLAY
LIST button.
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
K
ENTER
REPEAT
DVD-V
{
B
RETURN
ZOOM
L
Press MENU PLAY LIST button.
The DVD main menu will appear.
Screen:
Menu
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
MENU PLAY LIST button:
Displays a DVD disc menu – this
varies with the disc and may be
the same as the ‘Top menu.’
RETURN button:
Returns to the previously displayed menu screen.
K / L / { / B buttons:
Moves the cursor around screen.
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
after).
3
If the feature is not available,
may appear on the TV screen.
Press MENU PLAY LIST button to exit the menu.
51
Playing discs
Note:
Menus vary among discs. Refer to
the information accompanying the
disc for details.
E6500UD.QX
03.12.8
19:07
Page 52
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Playing discs using
the title menu
DVD-V
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start play at
a specific title.
1
H
G
B
PLAY
REV
FWD
h
g
Press TOP MENU button.
The title menu will appear.
Screen:
STOP
C
MENU
PLAY LIST
TOP MENU/
ORIGINAL
TOP Menu
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
If the feature is not available,
may appear on the TV screen.
2
Select a title to play using
the K / L / { / B buttons,
then press ENTER button.
Play will begin at the title you
selected.
TOP MENU button:
Displays the ‘Top menu’ of a
DVD disc – this varies with the
disc.
RETURN button:
Returns to the previously displayed menu screen.
52
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
after).
SKIP
k
SETUP
K / L / { / B buttons:
Moves the cursor around screen.
3
Press TOP MENU button to
exit the title menu.
Note:
The TOP MENU button will not
always active with all DVDs.
E6500UD.QX
03.12.8
19:07
Page 53
Playing discs
Resume play
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
You can resume play from where
you stopped playing the disc last.
1
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
During play, press STOP C
button.
The resume message will appear.
Screen:
Step by step playback
1
During play, press PAUSE F
button.
Play will pause and sound will be
muted.
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
F
K
ENTER
REPEAT
{
Resume On
B
2
RETURN
ZOOM
L
2
Press PLAY B button.
In a few seconds, play will resume
from the point at which it
stopped last. You can resume
play at the same point even if you
turn off the DVD recorder.
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the play is
stopped.
Press SKIP G button
repeatedly.
The play will advance one frame
(or step) at a time you press the
button with the sound muted.
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
the play will go backward.
Playing discs
3
Press PLAY B button to
resume play.
53
E6500UD.QX
03.12.8
19:07
Page 54
Playing discs
POWER
TIMER
PROG.
DISPLAY
Pause
Repeat play
1
1
During play, press PAUSE F
button.
Play will pause and sound will be
muted.
During play, press REPEAT
button.
Repeat menu will appear.
Screen for DVD:
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
1
0
REC
PAUSE
1
SKIP
k
H
01:23:45
DVD-Video
Off
Title
Chapter
All
A-B
G
B
PLAY
REV
FWD
h
g
F
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Screen for CD:
K
ENTER
REPEAT
{
B
2
1
RETURN
ZOOM
L
00:00:00
Audio CD
Off
Track
All
A-B
Press PLAY B button to
resume play.
2
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will
start.
Title:
The current title will be played
repeatedly. (DVD only)
Chapter:
The current chapter will be
played repeatedly. (DVD only)
All:
The current disc will be played
repeatedly. (except DVD Video)
54
E6500UD.QX
03.12.8
19:07
Page 55
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
Press ENTER button to select the
ending point (B).
The A-B point will be played
repeatedly.
CM SKIP
REC MODE CLEAR
0
REC
A-B:
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
PAUSE
SKIP
k
H
G
Zoom
DVD
1
During play, press ZOOM
button.
Zoom menu will appear.
Screen:
Track:
The current track will be played
repeatedly. (CD only)
1
1
x1.2
01:23:45
x1.5
DVD-Video
x2.0
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Select a desired zoom factor
to zoom using { / B buttons, then press ENTER button.
The zoom area will be displayed.
Playing discs
Note:
When selecting a smaller factor
than the current,the zoom area
will not be displayed.
3
Select a desired zoom position using K / L / { / B buttons, then press ENTER button.
The zoom play will start.
55
E6500UD.QX
03.12.8
19:07
Page 56
Playing discs
Title/Chapter search
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
DVD
Using SKIP H / G
buttons
1
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
During play, press SKIP G
button to skip the current
title or chapter and move to
the next.
The title or chapter will move
forward by one at a time.
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
To go back to the previous title
or chapter, press SKIP H button. The title or chapter will
move backward by one at a time.
B
RETURN
ZOOM
L
Using DISPLAY button
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
2
Select
icon using { / B
button, then press ENTER
button.
‘T’ for title will be highlighted.
Title:
Enter a desired title number
to search using K / L buttons
or number buttons, then
press ENTER button.
Title search will start.
56
Chapter:
To move to ‘C’ for chapter, press
B button.
Enter a desired chapter number to search using K / L buttons or number buttons, then
press ENTER button.
Chapter search will start.
E6500UD.QX
03.12.8
19:07
Page 57
Playing discs
Time search
Track search
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
CD
Using SKIP H / G
buttons
1
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
During play, press SKIP G
button to skip the current
track and move to the next.
The track will move forward by
one at a time.
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
To go back to the previous track,
press SKIP H button. The track
will move backward by one at a
time.
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Using DISPLAY button
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
01:23:45
Audio CD
2
Select
icon using { / B
button, then press ENTER
button.
‘T’ for track will be highlighted.
To move to the clock icon, press
B button.
3
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
Playing discs
2
Select
icon using { / B
button, then press ENTER
button.
‘T’ for track will be highlighted.
3
Enter a desired track number
to search using K / L buttons
or number buttons, then
press ENTER button.
Track search will start.
57
E6500UD.QX
03.12.8
19:07
Page 58
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Fast forward / Fast
reverse search
Slow forward / Slow
reverse play
1
1
During play, press FWD D
button to search in fast forward.
To change the speed, press FWD
D button repeatedly.
Every time you press FWD D
button, search speed will be
changed as follows.
During play, press PAUSE k
button, then press FWD D
button.
Play in slow forward will start.
To change the speed, press FWD
D button repeatedly.
Every time you press FWD D
button, search speed will be
changed as follows.
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
Normal
speed
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
x40
x1/2
K
x20
ENTER
REPEAT
{
Pause
x2
x1/8
B
RETURN
ZOOM
L
x1/16
To search in fast reverse,
press REV E button.
Every time you press REV E
button, search speed will be
changed as follows.
Normal
speed
x40
To play in slow reverse, press
REV E.
Every time you press REV E
button, search speed will be
changed as follows.
Pause
x5
x20
x1/4
x1/16
x1/8
To return to the normal play,
press PLAY B button.
58
To return to the normal play,
press PLAY B button.
E6500UD.QX
03.12.8
19:07
Page 59
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Skipping TV commercials during play
Selecting the format
of audio and video
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs without interrupting.
You can select a audio and video
format as you prefer dipending
on the contents of the disc you
are playing.
1
Switching audio soundtrack
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
During play, press CM SKIP
button.
Normal play will start at 30 seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, searching point will be
extended by 30 second.
You can press up to 6 times (180
seconds).
DVD-V DVD-RW Video
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
Select
icon using { / B
button, then press ENTER
button.
Audio menu will appear.
1
1
00:00:00
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
59
Playing discs
2
E6500UD.QX
03.12.8
19:07
Page 60
Playing discs
POWER
TIMER
PROG.
DISPLAY
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
3
2
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
Audio soundtrack will switch.
Select
icon using { / B
button, then press ENTER
button.
Audio menu will appear.
OPEN/CLOSE
Note:
Some discs will only allow you to
change the soundtrack from the
disc’s menu. Press TOP MENU/
ORIGINAL button or MENU
PLAYLIST button to display this.
Caution:
Some discs feature both Dolby
Digital and DTS soundtracks.
There is no audio output when
DTS is selected.
B
DVD-RW VR
RETURN
ZOOM
L
On DVD-RW discs recorded in
VR mode that have both a main
and a SAP (Secondary Audio
Program) audio channel, you can
switch between main(R), SAP(L),
or a mix of both(L/R).
1
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
L/R
–––
3
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
Audio channel menu will appear.
1
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
L/RL/R
–––L
R
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-RW
VR Original
60
4
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
E6500UD.QX
03.12.8
19:07
Page 61
Playing discs
CD
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
When playing Audio CDs you
can switch between stereo, just
the left channel or just the right
channel.
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
B
PLAY
REV
1
FWD
h
00:00:00
g
STOP
Switching subtitles
DVD-V
DVD-RW VR
Many DVD Video discs have subtitles in one or more languages –
the disc box will usually tell you
which subtitle languages are available. You can switch subtitle languages anytime during playback.
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
1
01:23:45
DVD-Video
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
Select
icon using { / B
button, then press ENTER
button.
Audio menu will appear.
3
2
Select
icon using { / B
button, then press ENTER
button.
Subtitle menu will appear.
1
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
1
00:00:00
DVD-Video
off
1 English
2 Japanese
Playing discs
3
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
When selecting “OFF,” subtitle
will be disappeared.
61
E6500UD.QX
03.12.8
19:07
Page 62
Playing discs
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
Note:
Some discs will only allow you to
change the subtitle from the disc
menu. Press TOP MENU/ button
ORIGINAL or MENU button
PLAYLIST button to display the
disc menu.
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
Switching camera angles
0
REC
PAUSE
DVD-V
1
During play, press DISPLAY
button.
The display menu will appear.
Screen:
DVD-V
1
1
01:23:45
DVD-Video
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
Reducing block noise
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Some DVD Video discs feature
scenes shot from two or more
angles–check the disc box for
details: it should be marked with
a angle icon if it contains multiangle scenes.
K
ENTER
REPEAT
{
B
1
2
During play, press DISPLAY
button.
The display menu will appear.
Screen:
Select
icon using { / B
button, then press ENTER
button.
NR menu will appear.
RETURN
ZOOM
L
1
1
01:23:45
DVD-Video
1
1
00:00:00
DVD-Video
off
Type 1
Type 2
62
2
3
Select
icon using { / B
button, then press ENTER
button.
Angle will switch.
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
E6500UD.QX
03.12.8
19:07
Page 63
Playing discs
Playing discs
63
E6500UD.QX
03.12.8
19:07
Page 64
Editing
Information on disc editing
Editing playlists
You can make the discs with editing functions
following of the DVD recorder as you prefer.
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
Followings are the items you can edit with a
playlist.
• Deleting titles (Refer to page XX)
• Deleting parts of titles (Refer to page XX)
• Putting names on titles (Refer to page XX)
• Setting or clearing chapter markers (Refer to
page XX)
• Setting pictures for thumbnails (Refer to page
XX)
• Adding titles to a playlist (Refer to page XX)
• Deleting a playlist (Refer to page XX)
Editing discs with Video mode
You can edit discs with Video mode for the following items. Be sure that once you edit titles, they
will not remain as original.
• Deleting titles (Refer to page XX)
• Putting names on titles (Refer to page XX)
• Setting or clearing chapter markers (Refer to
page XX)
Note:
• Once a disc is finalized, then editing the disc or
recording to the disc will not be available. (Except
DVD-RW discs with VR mode.)
• A playlist is not available with the discs in Video
mode.
Editing DVD-R discs
Followings are the items you can edit DVD-R discs.
• Deleting titles (Refer to page XX)
• Putting names on titles (Refer to page XX)
Editing discs with VR mode
For discs with VR mode, you can edit from
“Original” menu or “Playlist” menu, which is created from the original.
Table for characters to enter
Number
buttons
1
Editing original titles
Followings are the items you can edit the original.
• Deleting titles (Refer to page XX)
• Deleting parts of titles (Refer to page XX)
• Putting names on titles (Refer to page XX)
• Setting or clearing chapter markers (Refer to
page XX)
• Setting pictures for thumbnails (Refer to page
XX)
• Setting titles to protect (Refer to page XX)
Note:
Original titles once edited will not be remained as
recorded originally. When you want to leave the
original as it is, create the playlist to edit as you
prefer. (Refer to page XX)
64
2
Highlight
ABC
<space>
abc
<space>
123
0
@!?
<space>
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
1
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
3
ABC
abc
2
4
DEF
der
3
5
GHI
ghi
4
6
JKL
jkl
5
7
MNO
mno
6
8
PQRS
pqrs
7
9
TUV
tuv
8
0
WXYZ
wxyz
9
E6500UD.QX
03.12.8
19:07
Page 65
Editing
2
Editing discs
POWER
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
Be sure that once you edit original titles, they will not be
remained as recorded originally.
When you want to leave original
titles as recorded originally for
DVD-RW with VR mode, create
a playlist first, then edit it as you
prefer.
Followings are the ways to edit
discs in each format DVD-R,
which is always in Video mode,
DVD-RW, which may be either
in Video mode or VR mode.
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
{
B
Deleting titles
RETURN
ZOOM
L
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
3
DVD-RW Video
ENTER
REPEAT
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Edit menu will appear.
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
in Video mode is deleted, the
disc space to record will be
increased.
1
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
4
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Titlelist will appear.
Screen:
Select “Yes” using { / B
buttons, then press ENTER
button.
Title will be deleted.
Disc > Edit
Disc > Edit
1
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
Title Delete
Edit Title Name
Chapter Mark
Yes
5
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
JAN/1 1:00AM
JAN/1 1:00AM
5
Press SETUP button to exit
DISC menu.
65
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
E6500UD.QX
03.12.8
19:07
Page 66
Editing
Putting names on titles
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
A window for entering a title
name will appear.
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
Disc > Edit > Edit Title Name
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
1
0:01:25
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Titlelist will appear.
Screen:
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Disc > Edit
K
ENTER
REPEAT
{
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
B
RETURN
ZOOM
4
L
JAN/1 1:00AM
5
JAN/1 1:00AM
2
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Edit menu will appear.
4
Enter a title name using K /
L / { / B buttons and number buttons as specified
below.
To delete letters, press CLEAR
button.
Refer to page 62 “Table for characters to enter.”
<Example : when putting the
name “News23”>
1.
Select “ABC” using K / L
buttons, then press Enter
button.
Disc > Edit > Edit Title Name
1
Disc > Edit
1
ABC
abc
123
@!?
Title Delete
Edit Title Name
Chapter Mark
0:01:25
JAN/ 1 1:00AM CH12
XP
0:01:25
3
2.
Press 6 twice using number
buttons.
Disc > Edit > Edit Title Name
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
1
ABC
abc
123
@!?
N
0:01:25
66
E6500UD.QX
03.12.8
19:07
Page 67
Editing
POWER
A
Disc > Edit > Edit Title Name
1
2
3
4
5
6
7
8
1
CH
ABC
abc
123
@!?
REC
MONITOR
9
Select “Yes” using { / B
buttons, then press ENTER
button.
The name you entered will be
activated for the title.
N
Disc > Edit > Edit Title Name
CM SKIP
REC MODE CLEAR
5
0:01:25
1
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
3.
Select “abc” using K / L buttons, the press Enter button.
4.
Press 3 twice, 9 once and 7
four times using number buttons.
ABC
abc
123
@!?
Yes
No
abc
Writing to Disc
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
Disc > Edit > Edit Title Name
1
ENTER
REPEAT
{
B
ABC
abc
123
@!?
RETURN
ZOOM
L
6
Press SETUP button to exit
DISC menu.
News
0:01:25
5.
Select “123” using K / L buttons, then press Enter button.
Disc > Edit > Edit Title Name
1
ABC
abc
123
@!?
News
0:01:25
6.
Press 2 and 3 using number
buttons, then press Enter
button.
Option window will appear.
Disc > Edit > Edit Title Name
1
ABC
abc
123
@!?
Yes
No
News23
0:01:25
67
E6500UD.QX
03.12.8
19:07
Page 68
Editing
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Setting or clearing chapter markers
Disc > Edit
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers
every at a specified time you
selected among options for a
title of more than 5 minutes.
SKIP
k
H
1
B
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
1
JAN/ 1 1:00AM CH12
B
XP
0:01:25
4
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Titlelist will appear.
Screen:
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
RETURN
ZOOM
Title Delete
Off
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
G
PLAY
REV
Option window will appear.
L
Disc > Edit
Title Delete
Off
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Yes
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
JAN/ 1 1:00AM CH12
No
XP
0:01:25
4
JAN/1 1:00AM
5
Note:
You cannot select a time for
putting markers more than a
length of a title.
JAN/1 1:00AM
2
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
5
Select “Yes” using { / B
buttons, then press ENTER
button.
A chapter marker will be added.
Note:
A chapter marker may be delayed
according to the recording content.
0:01:25
6
3
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
68
Press SETUP button to exit
DISC menu.
68
E6500UD.QX
03.12.8
19:07
Page 69
Editing
DVD-RW VR
POWER
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Disc > Original
Deleting titles
1
When a title is deleted from an
original list in VR mode, the disc
space to record will be increased.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
SKIP
k
H
G
1
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
RETURN
ZOOM
Original menu will appear.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
4
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Original
1
Disc
L
Editing
TIMER
PROG.
DISPLAY
Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
5
Original
2
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Yes” using { / B
buttons, then press ENTER
button.
Title will be deleted.
Disc > Original
1
Disc > Original
1
1
2
Yes
3
JAN/ 1 1:00AM CH12
JAN/1 1:00AM
4
JAN/1 1:00AM
JAN/1 1:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
No
XP
Writing to Disc
JAN/1 1:00AM
5
JAN/1 1:00AM
3
6
Press SETUP button to exit
DISC menu.
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
69
E6500UD.QX
03.12.8
19:07
Page 70
Editing
Deleting parts of titles
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Disc > Original
You can delete a specified part of
a title, then the disc space to
record will be increased.
Be sure to know that the parts
once deleted cannot be brought
back to the disc.
1
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
4
SKIP
k
Original menu will appear.
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
K
Disc
Disc > Original
ENTER
REPEAT
{
1
B
RETURN
ZOOM
L
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
XP
0:00:55
Original
2
5
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Press ENTER button to
decide a start point, then
press ENTER button to
decide a end point.
A cursor will move to “Preview.”
You can check a preview.
Disc > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
6
5
JAN/1 1:00AM
3
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Disc > Original
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
1
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
70
E6500UD.QX
03.12.8
19:07
Page 71
Editing
POWER
Putting names on titles
Select “Yes” using { / B
buttons, then press ENTER
button.
Part of a title will be deleted.
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
Disc > Original
1
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
G
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Disc menu will appear.
Screen:
8
Disc
K
ENTER
REPEAT
{
B
RETURN
ZOOM
Press SETUP button to exit
DISC menu.
L
Original
2
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
5
JAN/1 1:00AM
71
Editing
TIMER
PROG.
DISPLAY
7
E6500UD.QX
03.12.8
19:07
Page 72
Editing
3
POWER
TIMER
PROG.
DISPLAY
Option window will appear.
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
Disc > Original > Edit Title Name
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Original menu will appear.
Yes
No
0:01:25
Disc > Original
1
CM SKIP
REC MODE CLEAR
0
PAUSE
SKIP
k
H
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
JAN/ 1 1:00AM CH12
XP
0:01:25
PLAY
REV
FWD
g
h
STOP
C
MENU
PLAY LIST
TOP MENU/
ORIGINAL
4
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
6
G
B
SETUP
ABC
abc
123
@!?
abc
REC
MONITOR
REC
1
Select “Yes” using { / B
buttons, then press ENTER
button.
The name you entered will be
activated for the title.
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Original > Edit Title Name
1
ABC
abc
123
@!?
Yes
No
abc
Writing to Disc
Disc > Original > Edit Title Name
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
5
Enter a title name using K /
L / { / B buttons and number buttons then press
ENTER button.
To delete letters, press CLEAR
button.
Refer to page 62 “Table for characters to enter.”
72
7
Press SETUP button to exit
DISC menu.
E6500UD.QX
03.12.8
19:07
Page 73
Editing
POWER
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
chapter markers.
3
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Original menu will appear.
Disc > Original
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
B
PLAY
REV
FWD
g
h
STOP
1
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
4
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc
Disc > Original
1
JAN/ 1 1:00AM CH12
Original
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
XP
0:01:25
2
5
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Add” using K / L
buttons, then press ENTER
button.
Option window will appear.
Disc > Original
Disc > Original
1
1
2
3
1
JAN/1 1:00AM
4
JAN/1 1:00AM
JAN/1 1:00AM
5
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/1 1:00AM
JAN/1 1:00AM
JAN/ 1 1:00AM CH12
No
XP
0:01:25
73
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Setting or clearing chapter markers
E6500UD.QX
03.12.8
19:07
Page 74
Editing
6
POWER
TIMER
PROG.
DISPLAY
Setting pictures for
thumbnails
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
Select “Yes” using { / B
buttons, then press ENTER
button.
A chapter marker will be added.
REC
MONITOR
Disc > Original
1
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
G
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
B
PLAY
REV
FWD
h
g
You can set a picture to each
title for a thumbnail. It helps you
to remember the contents of the
title you are playing. The beginning picture has been selected as
the default.
Note:
If a selected picture for a thumbnail is deleted by deleting a part
of a title, a default picture will be
selected.
STOP
C
SETUP
Disc > Original
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
K
Chapter 2/2
ENTER
REPEAT
{
B
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
RETURN
ZOOM
JAN/ 1 1:00AM CH12
L
XP
0:01:25
7
1
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Disc
Press SETUP button to exit
DISC menu.
Original
2
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
74
5
JAN/1 1:00AM
E6500UD.QX
03.12.8
19:07
Page 75
Editing
3
POWER
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Original menu will appear.
REC
MONITOR
1
Disc > Original
1
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
G
JAN/ 1 1:00AM CH12
XP
0:01:25
B
PLAY
REV
FWD
h
To prevent accidental recording,
editing, or erasing the titles, you
can protect them from the original menu.
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Disc
4
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select “Index Picture Set”
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Original > Index Picture Set
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Original
2
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
5
Disc > Original
Select “Yes” using { / B
buttons, then press ENTER
button.
A picture for thumbnail will be
set.
Disc > Original > Index Picture Set
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
5
JAN/1 1:00AM
3
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Writing to Disc
6
Press SETUP button to exit
DISC menu.
75
Editing
TIMER
PROG.
DISPLAY
Setting titles to protect
E6500UD.QX
03.12.8
19:07
Page 76
Editing
Original menu will appear.
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Disc > Original
1
A
1
2
3
4
5
6
7
8
9
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
CH
JAN/ 1 1:00AM CH12
XP
REC
MONITOR
0:01:25
4
0
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
You are allowed to release the
titles once protected from protecting.
1
CM SKIP
REC MODE CLEAR
REC
Releasing titles from
protecting
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Select “Protect OFF ➔ ON”
using K / L buttons, then
press ENTER button.
Option window will appear.
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Disc
K
Disc > Original
ENTER
REPEAT
{
1
B
RETURN
ZOOM
L
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
Original
No
XP
0:01:25
2
5
Select “Yes” using { / B
buttons, then press ENTER
button.
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Original
Disc > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
5
No
JAN/1 1:00AM
XP
JAN/1 1:00AM
Writing to Disc
6
Press SETUP button to exit
DISC menu.
To protect a whole disc
(DVD-RW VR mode Only):
Select “Disc Protect” from Disc
menu, then select “Yes.”
76
3
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
E6500UD.QX
03.12.8
19:07
Page 77
Editing
Original menu will appear.
POWER
2
3
4
5
6
7
8
9
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
CH
JAN/ 1 1:00AM CH12
XP
REC
MONITOR
0:01:25
CM SKIP
REC MODE CLEAR
4
0
REC
PAUSE
SKIP
k
H
B
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Select “Protect ON ➔ OFF”
using K / L buttons, then
press ENTER button.
Option window will appear.
K
Disc > Original
ENTER
REPEAT
{
1
B
RETURN
ZOOM
Deleting titles
In VR mode, even when a title is
deleted from the playlist, the
original title will remain.
The disc space to record will not
be increased.
1
G
PLAY
Playlist
Disc > Original
A
1
DVD-RW VR
L
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 1:00AM CH12
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Disc
No
XP
0:01:25
Original
5
Select “Yes” using { / B
buttons, then press ENTER
button.
Disc > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 1:00AM CH12
No
2
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
XP
Writing to Disc
4
6
JAN/1 1:00AM
5
Add New
Title
Delete
PlayList
JAN/1 1:00AM
Press SETUP button to exit
DISC menu.
77
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
E6500UD.QX
03.12.8
19:07
Page 78
Editing
3
POWER
TIMER
PROG.
DISPLAY
Deleting parts of titles
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playlist menu will appear.
REC
MONITOR
Disc > Playlist
1
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
SKIP
k
H
JAN/ 1 1:00AM CH12
XP
0:01:25
PLAY
FWD
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
4
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
G
B
REV
You can delete a specified part of
a title.
Even when a title is deleted from
the playlist, the original title will
remain.
The disc space to record will not
be increased.
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc
Disc > Playlist
1
Yes
JAN/ 1 1:00AM CH12
Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
No
2
XP
0:01:25
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
5
Select “Yes” using { / B
buttons, then press ENTER
button.
Title will be deleted.
Disc > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
5
Disc > Playlist
JAN/1 1:00AM
1
JAN/1 1:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Yes
JAN/ 1 1:00AM CH12
Add New
Title
Delete
PlayList
No
3
XP
Writing to Disc
6
78
Press SETUP button to exit
DISC menu.
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playlist menu will appear.
E6500UD.QX
03.12.8
19:07
Page 79
Editing
6
Disc > Playlist
POWER
1
A
1
2
3
4
5
6
7
8
9
JAN/ 1 1:00AM CH12
CH
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
REC
MONITOR
Disc > Playlist
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
1
4
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Yes
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
C
SETUP
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
JAN/ 1 1:00AM CH12
No
XP
0:01:25
7
Disc > Playlist
K
1
ENTER
REPEAT
{
B
RETURN
ZOOM
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
L
JAN/ 1 1:00AM CH12
XP
0:00:55
Select “Yes” using { / B
buttons, then press ENTER
button.
Part of a title will be deleted.
Disc > Playlist
1
5
Press ENTER button to
decide a start point, then
press ENTER button to
decide a end point.
A cursor will move to “Preview”.
You can check a preview.
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
8
Press SETUP button to exit
DISC menu.
79
E6500UD.QX
03.12.8
19:07
Page 80
Editing
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
Putting names on titles
3
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playlist menu will appear.
Disc > Playlist
1
1
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
MENU
PLAY LIST
TOP MENU/
ORIGINAL
XP
0:01:25
4
C
SETUP
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Disc
K
ENTER
REPEAT
{
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
B
RETURN
ZOOM
L
Original
Disc > Playlist > Edit Title Name
2
1
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
JAN/ 1 1:00AM CH12 XP
0:01:25
5
Disc > Playlist
4
ABC
abc
123
@!?
5
JAN/1 1:00AM
Add New
Title
Delete
PlayList
Enter a title name using K /
L / { / B buttons and number buttons, then press
ENTER button.
To delete letters, press CLEAR
button.
Refer to page 62 “Table for characters to enter.”
80
E6500UD.QX
03.12.8
19:07
Page 81
Editing
Option window will appear.
POWER
OPEN/CLOSE
Disc > Playlist > Edit Title Name
1
A
1
2
3
4
5
6
7
8
9
CH
ABC
abc
123
@!?
Yes
REC
MONITOR
0:01:25
CM SKIP
REC MODE CLEAR
6
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
g
h
STOP
C
SETUP
No
abc
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
Select “Yes” using { / B
buttons, then press ENTER
button.
The name you entered will be
activated for the title.
ENTER
REPEAT
{
Disc > Playlist > Edit Title Name
B
1
RETURN
ZOOM
L
ABC
abc
123
@!?
Yes
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add
chapter markers.
1
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
No
Disc
abc
Writing to Disc
7
Original
Press SETUP to exit DISC
menu.
2
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
5
Add New
Title
Delete
PlayList
JAN/1 1:00AM
81
Editing
TIMER
PROG.
DISPLAY
Setting or clearing chapter markers
E6500UD.QX
03.12.8
19:07
Page 82
Editing
POWER
TIMER
PROG.
DISPLAY
3
6
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playlist menu will appear.
Select “Yes” using { / B
buttons, then press ENTER
button.
A chapter marker will be added.
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
Disc > Playlist
Disc > Playlist
1
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
SKIP
k
H
Yes
G
JAN/ 1 1:00AM CH12
JAN/ 1 1:00AM CH12
XP
Writing to Disc
0:01:25
B
No
XP
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
4
Disc > Playlist
1
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Disc > Playlist
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
5
Select “Add” using K / L
buttons, then press ENTER
button.
Option window will appear.
Disc > Playlist
1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
82
Chapter 2/2
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
7
Press SETUP button to exit
DISC menu.
E6500UD.QX
03.12.8
19:07
Page 83
Editing
POWER
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
You can set a picture to each
title for a thumbnail. It helps you
to remember the contents of the
title you are playing. The beginning picture has been selected as
the default.
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Playlist menu will appear
Disc > Playlist
1
CM SKIP
REC MODE CLEAR
0
REC
3
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
Note:
If a selected picture for a thumbnail is deleted by deleting a part
of a title, a default picture will be
selected.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
.
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
4
1
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > PlayList > Index Picture Set
1
Disc
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Original
5
2
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Yes” using { / B
buttons, then press ENTER
button.
A picture for thumbnail will be
set.
Disc > PlayList > Index Picture Set
Disc > Playlist
1
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
Add New
Title
Delete
PlayList
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
JAN/1 1:00AM
JAN/1 1:00AM
6
Press SETUP button to exit
DISC menu.
83
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Setting pictures for
thumbnails
E6500UD.QX
03.12.8
19:07
Page 84
Editing
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
3
Adding titles to a
playlist
You can add or delete a title in
the playlist as you prefer.
You can add titles to the playlist
up to 99.
Select “Add New Title”
using K / L / { / B buttons,
then press ENTER button.
Original list will appear.
REC
MONITOR
CM SKIP
REC MODE CLEAR
Disc > Playlist > Add New Title
1
1
2
1
3
0
JAN/10 10:30AM
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Disc
K
ENTER
REPEAT
{
JAN/12 8:00PM
4
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
B
RETURN
ZOOM
JAN/12 5:00PM
L
Original
2
58%
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Data Writing
Disc > Playlist
Disc > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
1
1
2
3
JAN/1 00:00AM
JAN/1 00:00AM
JAN/1 00:00AM
5
6
4
JAN/1 00:00AM
4
JAN/1 1:00AM
5
JAN/1 00:00AM
JAN/12 8:00AM
Add New
Title
Delete
PlayList
JAN/1 1:00AM
5
Press SETUP button to exit
DISC menu.
To delete a title from playlist,
refer to page 76 “Deleting titles.”
To delete a playlist, refer to page
XX “Deleting a playlist.”
84
E6500UD.QX
03.12.8
19:07
Page 85
Editing
3
Deleting a playlist
POWER
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
0
PAUSE
H
1
1
2
3
JAN/1 00:00AM
JAN/1 00:00AM
JAN/1 00:00AM
B
REV
FWD
h
g
STOP
C
MENU
PLAY LIST
TOP MENU/
ORIGINAL
4
K
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
DISC menu will appear.
Screen:
ENTER
{
JAN/1 00:00AM
JAN/1 00:00AM
Add New
Title
Delete
Playlist
Yes
No
4
Select “Yes” using { / B
buttons, then press ENTER
button.
A playlist will be erased.
Disc
B
RETURN
ZOOM
5
G
PLAY
REPEAT
Disc > Playlist
1
SKIP
k
SETUP
Note:
Deleting a playlist will not
increase the available recording
time.
Select “Delete PlayList”
using K / L / { / B buttons,
then press ENTER button.
Option window will appear.
CM SKIP
REC MODE CLEAR
REC
A playlist can be deleted when
becoming not needed.
L
Disc > Playlist
Original
Add New
Title
Delete
Playlist
2
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
JAN/1 1:00AM
5
5
Press SETUP button to exit
DISC menu.
Add New
Title
Delete
PlayList
JAN/1 1:00AM
85
Editing
TIMER
PROG.
DISPLAY
OPEN/CLOSE
E6500UD.QX
03.12.8
19:07
Page 86
Editing
DVD-R
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Deleting titles
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
3
You can delete titles which you
do not need anymorer, however
the disc space to record will not
in crease.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
Title Delete
Edit Title Name
SKIP
k
H
G
1
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Titlelist will appear.
Screen:
RETURN
ZOOM
Disc > Edit
L
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
Select “Yes” using { / B
buttons, then press ENTER
button.
Title will be deleted.
Disc > Edit
4
5
1
JAN/1 1:00AM
Title Delete
Edit Title Name
JAN/1 1:00AM
Yes
JAN/ 1 1:00AM CH12
2
Writing to Disc
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
XP
0:01:25
86
No
XP
5
Press SETUP button to exit
DISC menu.
E6500UD.QX
03.12.8
19:07
Page 87
Editing
Putting names on titles
POWER
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
1
0
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
Select “Edit” from DISC
menu using K / L buttons,
then press ENTER button.
Titlelist will appear.
Screen:
C
SETUP
1
0:01:25
REC MODE CLEAR
REC
Disc > Edit > Edit Title Name
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
Editing
TIMER
PROG.
DISPLAY
Alphabet window will appear.
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Disc > Edit
K
ENTER
REPEAT
{
1
1
2
3
JAN/1 1:00AM
JAN/1 1:00AM
JAN/1 1:00AM
4
Enter a title name using K /
L / { / B buttons and number buttons, then press
ENTER button.
Refer to page xx for details.
Option window will appear.
B
RETURN
ZOOM
4
L
5
Disc > Edit > Edit Title Name
1
JAN/1 1:00AM
JAN/1 1:00AM
ABC
abc
123
@!?
Yes
2
No
abc
0:01:25
Select a desired title using K
/ L / { / B buttons, then
press ENTER button.
Edit menu will appear.
Disc > Edit
1
Title Delete
Edit Title Name
5
Select “Yes” using { / B
buttons, then press ENTER
button.
Disc > Edit > Edit Title Name
1
JAN/ 1 1:00AM CH12
XP
0:01:25
ABC
abc
123
@!?
Yes
3
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
No
abc
Writing to Disc
6
Press SETUP button to exit
DISC menu.
87
E6500UD.QX
03.12.8
19:07
Page 88
Using SETUP menu
SETUP/DISC Menu
Play Back
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Setup Menu
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Page XX
Page XX
Page XX
Page XX
Page XX
Page XX
Page XX
Recording
Setup > Recording
DVD-RW Recording Format
SETUP menu
Auto Chapter
Video mode
OFF
Timer Programing
Page XX
Page XX
Page XX
Setup
Display
Setup > Display
Playback Setting
OSD Background Transparency 100%
OSD Background Color
OSD Language
1
English
FL Dimmer
Auto
Screen Saver
OFF
Page XX
Page XX
Page XX
Page XX
Page XX
Select Video
Setup > Select Video
L1 (Rear)
Video In
L2 (Front)
Video In
Page XX
Page XX
Clock
Setup > Clock
Auto Clock Setting
OFF
Daylight Saving Time
ON
Page XX
Page XX
Page XX
Stereo
Page XX
Page XX
Page XX
Clock Setting
Channel Preset
Setup > Channel Preset
Auto Preset
Manual Preset
TV Audio Select
88
E6500UD.QX
03.12.8
19:07
Page 89
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Other settings:
Parental Lock
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
STOP
Note:
This feature may not be available
to some discs.
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Using SETUP menu
CM SKIP
REC MODE CLEAR
Some DVD-Video discs feature a
Parental Lock level. If the DVD
recorder is set to a lower level
than the disc, it will require you
to enter a password before the
disc will play. This gives you some
control about what your children
watch on the DVD recorder.
1
Setting a parental lock
level
When you first change the
parental lock level or after resetting the DVD recorder, there is
no password set. When the password setting menu appears, enter
a 4-digit number as your own
password.
“All” has been selected as the
default.
Note:
You will find 2 kinds of icon in
Parental Lock.
: A password has been set
already.
: A password has not been
set yet.
Setup Menu
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “PlayBack” using K /
L / { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
89
E6500UD.QX
03.12.8
19:07
Page 90
Using SETUP menu
4
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
Select “Parental Lock” using
K / L buttons, then press
ENTER button.
CH
Setup > Play Back
REC
MONITOR
7
9
8
CM SKIP
REC MODE CLEAR
When you first change the
parental lock level:
Option window will appear.
PAUSE
H
Setup > Play Back
G
TV Aspect
Parental Lock
Disc Menu Language
B
Audio Language
PLAY
REV
FWD
Subtitle Language
h
g
Digital Out
STOP
Dynamic Range Control
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Parental Lock
Disc Menu Language
Audio Language
4:3 Letter Box
8
English
Original
OFF
Digital Out
SKIP
k
TV Aspect
Subtitle Language
0
REC
3.
Press ENTER button.
Your own password has been
changed and your setting will be
activated.
Fast Forward with Audio
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
1.
Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Dynamic Range Control
ON
Fast Forward with Audio
OFF
When you already set your
own password:
Option window will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Setup > Play Back
TV Aspect
4:3
All Letter Box
Change
8 Password?
Parental Lock
All
Yes
No
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
2.
Select “Yes,” then enter a
new password.
Fast Forward with Audio
1.
Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Digital Out
4:3
All Letter Box
Password
8
All
7- - - English
6
Original
5
OFF
4
3
2
ON
1
OFF
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Dynamic Range Control
Fast Forward with Audio
4:3
All Letter Box
Password
8
All
7- - - English
6
Original
5
OFF
4
3
2
ON
1
OFF
2.
Enter your own password.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
90
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
E6500UD.QX
03.12.8
19:07
Page 91
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
3.
Press ENTER button.
Option window will appear.
A
Setup > Play Back
TV Aspect
1
4:3
All Letter Box
Change
8 Password?
All
Yes
No
7
English
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
3
2
Parental Lock
CH
Disc Menu Language
4
5
7
8
6
REC
MONITOR
9
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
g
Using SETUP menu
CM SKIP
REC MODE CLEAR
4.
Select “Yes,” then enter a
new password.
When selecting “No,” the current password is still effective.
STOP
C
SETUP
Setup > Play Back
MENU
PLAY LIST
TOP MENU/
ORIGINAL
TV Aspect
K
Parental Lock
Disc Menu Language
ENTER
REPEAT
{
Audio Language
B
Subtitle Language
RETURN
ZOOM
Digital Out
Dynamic Range Control
L
Fast Forward with Audio
4:3
All Letter Box
Password
8
All
7- - - English
6
Original
5
OFF
4
3
2
ON
1
OFF
5.
Press ENTER button.
Your own password has been
changed and your setting will be
activated.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
8
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
5
Press SETUP button to exit
SETUP menu.
Note:
Clearing Parental Lock setting
When you forget the password
or you want to clear all setting in
Parental Lock, entering 4, 7, 3,
and 7 as an alternate will be
effective.
91
E6500UD.QX
03.12.8
19:07
Page 92
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Other settings:
Language settings
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
Various languages may be available for the discs you play. You
can choose the language you prefer for each. English has been
selected as the default.
All language settings are not
always available with all discs.
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
PAUSE
SKIP
k
H
G
B
Subtitle Language
Choosing the menu language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
1
4
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Disc Menu
Language” using K / L buttons, then press ENTER button.
Option window will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup Menu
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
2
Select SETUP using { / B
navigation buttons, then
press ENTER button.
SETUP menu will appear.
5
Select a desired language
using K / L buttons, then
press ENTER button.
Setup
Playback Setting
92
When you want a language
other than English, French,
and Spanish:
1.
Choose “Other,” then press
ENTER button.
The code input option will
appear, so that you can select a
language you want by entering
the 4-digit code number using
number buttons.
Refer to the language code table
on page xx.
E6500UD.QX
03.12.8
19:07
Page 93
Using SETUP menu
3
Setup > Play Back
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
TV Aspect
Subtitle Language
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
Digital Out
Code Input
Parental Lock
A
Disc Menu Language
Audio Language
1
3
2
CH
4
5
6
7
8
9
Dynamic Range Control
---ON
Fast Forward with Audio
OFF
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
REC
MONITOR
Setup > Play Back
0
REC
TV Aspect
6
Parental Lock
Disc Menu Language
Audio Language
PAUSE
SKIP
k
H
Subtitle Language
G
Press SETUP button to exit
SETUP menu.
4:3 Letter Box
All
English
Using SETUP menu
CM SKIP
REC MODE CLEAR
Original
OFF
Digital Out
B
Dynamic Range Control
ON
Fast Forward with Audio
OFF
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
Choosing the audio language
ENTER
REPEAT
{
B
RETURN
ZOOM
1
L
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Audio Language”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Play Back
TV Aspect
Digital Out
4:3 Letter Box
All
Original
English
English
Original
French
OFF
Spanish
Other
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup Menu
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
5
Select a desired language
using K / L buttons, then
press ENTER button.
When the language you have
selected is included in the disc
you are playing, the DVD
recorder will play the disc in the
specified language in this menu.
Setup
Note:
This feature may not be available
to some discs.
Playback Setting
93
E6500UD.QX
03.12.8
19:07
Page 94
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
When you want a language
other than those in the
option:
1.
Choose “Other,” then press
ENTER button.
The code input option will
appear, so that you can select a
language you want by entering the
4-digit code number using number buttons.
Refer to the language code table
on page xx.
Choosing the subtitle
language
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
B
PLAY
REV
FWD
h
g
Setup > Play Back
STOP
C
SETUP
Subtitle Language
Digital Out
ENTER
{
All
Original
English
English
Original
French
OFF
Spanish
Other
Audio Language
K
REPEAT
4:3 Letter Box
Parental Lock
Disc Menu Language
MENU
PLAY LIST
TOP MENU/
ORIGINAL
TV Aspect
Dynamic Range Control
B
Fast Forward with Audio
Code Input
ON
---OFF
RETURN
ZOOM
Setup Menu
2
L
6
Press SETUP button to exit
SETUP menu.
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
94
Dynamic Range Control
ON
Fast Forward with Audio
OFF
E6500UD.QX
03.12.8
19:07
Page 95
Using SETUP menu
4
POWER
TIMER
PROG.
DISPLAY
A
1
2
3
4
5
6
7
8
9
CH
TV Aspect
Setup > Play Back
TV Aspect
Digital Out
4:3 Letter Box
All
OFF
English
English
Original
French
OFF
Spanish
Other
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Parental Lock
0
Disc Menu Language
Audio Language
PAUSE
SKIP
k
H
Subtitle Language
G
B
PLAY
REV
FWD
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
OFF
English
English
Original
French
OFF
Spanish
Other
Code Input
ON
---OFF
Select “OFF” to switch subtitles
off the screen.
Note:
You can change or switch off the
subtitles on a DVD disc also from
the disc menu if it is available.
g
h
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
5
6
Select a desired language
using K / L buttons, then
press ENTER button.
When the language you have
selected is included in the disc
you are playing, the DVD
recorder will play the disc in the
specified language in this menu.
Press SETUP button to exit
SETUP menu.
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Note:
This feature may not be available
to some discs.
When you want a language
other than those in the
option:
1.
Choose “Other,” then press
ENTER button.
The code input option will
appear, so that you can select a
language you want by entering the
4-digit code number using number buttons.
Refer to the language code table
on page xx.
95
Using SETUP menu
CM SKIP
REC MODE CLEAR
Parental Lock
Select “Subtitle Language”
using K / L buttons, then
press ENTER button.
Option window will appear.
REC
MONITOR
REC
Setup > Play Back
OPEN/CLOSE
E6500UD.QX
03.12.8
19:07
Page 96
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Other settings:
Audio settings
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
SKIP
k
H
G
B
PLAY
REV
FWD
h
Setting digital audio output
When you are connecting the
DVD recorder to an
amplifier/decoder, which is compatible with digital audio output,
you will need to make the settings to enjoy the full surround
sound.
Dolby Digital has been selected as
the default.
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
4
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Digital Out” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Setup > Play Back
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Parental Lock
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Setup Menu
OFF
PCM
ON
Dolby
Digital
OFF
2
5
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select desired options using
K / L buttons, then press
ENTER button.
Dolby Digital:
Setup
Setup > Play Back
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Parental Lock
Subtitle Language
Digital Out
Playback Setting
Dynamic Range Control
Fast Forward with Audio
96
OFF
PCM
ON
Dolby
Digital
PCM
Stream
OFF
E6500UD.QX
03.12.8
19:07
Page 97
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
0
REC
PAUSE
SKIP
k
H
G
B
2.
Select “Stream” using K / L
buttons, then press ENTER
button.
Dolby Digital sound will be output.
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
When your amplifier/decoder
is NOT compatible with
Dolby Digital:
1.
Select “PCM” using K / L
buttons, then press ENTER
button.
PCM sound will be output.
96kHz:
96kHz sound will be output,
however no digital sound will be
output when Copyguard function
is on.
48kHz:
Every sound will be output in
48kHz.
When your amplifier/decoder
is NOT compatible with
96kHz PCM:
1.
Select “48kHz” using K / L
buttons, then press ENTER
button.
6
Press SETUP button to exit
SETUP menu.
Note:
PCM sound will be output
depending on your PCM setting.
PCM:
Setup > Play Back
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Parental Lock
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
OFF
PCM Auto
48kHz
ON
Dolby
Digital
96kHz
OFF
When your amplifier/decoder
is compatible with 96kHz
PCM:
1.
Select one among all options
using K / L buttons, then
press ENTER button.
Auto:
96kHz sound will be output when
a DVD copy guard function is off.
96kHz sound will be output in
48kHz when Copyguard function
is on.
97
Using SETUP menu
CM SKIP
REC MODE CLEAR
When your amplifier/decoder
is compatible with Dolby
Digital:
1.
Select “Dolby Digital” using
K / L buttons, then press
ENTER button.
E6500UD.QX
03.12.8
19:07
Page 98
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Compressing the range
of sound volume
A
1
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
CM SKIP
REC MODE CLEAR
0
REC
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Dynamic Range
Control” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
PAUSE
SKIP
k
H
Subtitle Language
G
4:3 Letter Box
All
English
Original
OFF
Digital Out
B
Dynamic Range Control
ON
Fast Forward with Audio
OFF
ON
OFF
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
5
Setup Menu
K
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
On:
The range of sound volume will
be compressed.
6
Setup
Press SETUP button to exit
SETUP menu.
Playback Setting
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
98
Dynamic Range Control
ON
Fast Forward with Audio
OFF
E6500UD.QX
03.12.8
19:07
Page 99
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
7
8
9
CH
REC
MONITOR
0
REC
PAUSE
SKIP
k
H
1
4
Select “Fast Forward with
Audio” using K / L buttons,
then press ENTER button.
Option window will appear.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
G
4:3 Letter Box
All
English
Using SETUP menu
CM SKIP
REC MODE CLEAR
Outputting the sound
during play in fast forward
Original
OFF
Digital Out
Dynamic Range Control
Fast Forward with Audio
B
ON
ON
OFF OFF
PLAY
REV
FWD
h
g
STOP
C
SETUP
5
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
Setup Menu
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
On:
Sound will be output during play
in fast forward of x2.
6
Press SETUP button to exit
SETUP menu.
Setup
Playback Setting
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Play Back menu will appear.
Setup > Play Back
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
99
E6500UD.QX
03.12.8
19:07
Page 100
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
Other settings:
Display
Select the below item using
K / L buttons, then press
ENTER button.
A
1
2
3
4
5
6
7
8
4
1
CH
REC
MONITOR
9
CM SKIP
REC MODE CLEAR
0
REC
PAUSE
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
SKIP
k
H
G
OSD Background
Transparency:
You can setup the background
transparency of OSD screen with
your preference. Choose one
among 0% through 100%.
Default: 100%
B
PLAY
REV
FWD
h
Setup > Display
g
STOP
100%
OSD Background Transparency 100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
FL Dimmer
Auto 35%
Screen Saver
OFF 25%
10%
0%
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
Setup Menu
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
1.
Select a desired transparency,
then press ENTER button.
Your setting will be activated.
OSD Background Color:
You can setup the OSD screen
with your color preference.
Choose one among 1 (Green), 2
(Blue), and 3 (Red).
Default: 1 (Green)
Setup
Playback Setting
Setup > Display
OSD Background Transparency 100%
3
OSD Background Color
Select “Display” using K / L /
{ / B buttons, then press
ENTER button.
Display menu will appear.
Setup > Display
OSD Background Transparency 100%
OSD Background Color
100
FL Dimmer
11
2
English
3
Auto
Screen Saver
OFF
OSD Language
OSD Language
1
English
FL Dimmer
Auto
Screen Saver
OFF
1.
Select a desired option(1:
Green, 2: Blue, 3: Red), then
press ENTER button.
Your setting will be activated.
E6500UD.QX
03.12.8
19:07
Page 101
Using SETUP menu
POWER
TIMER
PROG.
DISPLAY
OPEN/CLOSE
A
1
2
3
4
5
6
OSD Language:
English, French, and Spanish are
available for the OSD language.
You can choose the language as
your convenience.
Default: English
Screen Saver:
You can set the screen saver to
on or off. Then you can select
the time to work the screen
saver function on the screen.
Default: OFF
CH
REC
MONITOR
7
9
8
0
REC
PAUSE
Setup > Display
OSD Background Transparency 100%
OSD Background Transparency 100%
OSD Background Color
OSD Background Color
FL Dimmer
1
English
English
Français
Auto
Español
Screen Saver
OFF
Screen Saver
OSD Language
OSD Language
FL Dimmer
SKIP
k
H
G
1
English
OFF
5Auto
minutes
10OFF
minutes
15 minutes
30 minutes
60 minutes
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
MENU
PLAY LIST
TOP MENU/
ORIGINAL
K
1.
Select a desired language,
then press ENTER button.
Your setting will be activated.
1.
Select a desired option, then
press ENTER button.
Your setting will be activated.
FL Dimmer:
The brightness of front display
can be changed as you prefer.
“Auto,” “Bright,” and “Dark” are
available. With “Auto” selected,
the front display is dimmed
brightly for approx. 15 secondes
when the DVD recorder is operating, otherwise dimmed dark.
Default: Auto
5
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Press SETUP button to exit
SETUP menu.
Setup > Display
OSD Background Transparency 100%
OSD Background Color
OSD Language
FL Dimmer
Screen Saver
1
English
Auto
Auto
Bright
OFF
Dark
1.
Select a desired option, then
press ENTER button.
Your setting will be activated.
101
Using SETUP menu
CM SKIP
REC MODE CLEAR
Setup > Display
E6500UD.QX
03.12.8
19:07
Page 102
Others
Troubleshooting
Before requesting service for this DVD recorder, check the table below for a possible cause of the problem
you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem
and restore proper operation.
Symptom
Remedy
Power
The power does not turn on.
• Check that the AC power cord is connected securely.
There is no picture.
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press RETURN
button to turn
off the display.
• Check the connection to your TV (page XX).
• Switch the input selector on your TV (such as to "LINE1") so
that the signal from the DVD recorder appears on the TV
screen.
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output signal from the DVD recorder passes
through your VCR to get to your TV, or if you are connected to
a combination TV/VIDEO player, the copy-protection signal
applied to some DVD programs could affect picture quality. If
you still experience this problem even when you connect the
DVD recorder directly to your TV, try connecting the DVD
recorder to your TV's S-VIDEO input.
TV program reception does not fill the
screen.
• Try to set the channels with "Auto Preset" in SETUP menu
(page XX).
• Select a channel of any TV program using the CH o / p
buttons.
• Reorient the TV antenna.
• Adjust the picture (see the TV's intruction manual).
• Place the DVD recorder and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
• Switch the input to TV.
• Connect the antenna cable correctly (page XX).
Picture
TV program pictures are distorted.
TV channels cannot be changed.
The playback picture or TV program from
the equipment connected through the
DVD recorder is distorted.
• If the playback picture output from a DVD player,VCR, or tuner
goes through the DVD recorder before reaching your TV, the
copy-protection signal applied to some programs could affect
picture quality. Disconnect the playback equipment in question
and connect it directly to your TV.
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifire input.
• The input source setting on the amplifier is incorrect.
• The recorder is in pause mode or in Slow-motion Play mode.
• The recorder is in fast forward or fast revers mode.
• If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio Setup settings (page XX).
Sound is noisy.
• The disc is dirty or flawed.
• When playing a CD with DTS sound tracks without DTS
decoder, noise will come from the speakers.
Sound
102
E6500UD.QX
03.12.8
19:07
Page 103
Others
Symptom
Playback
The disc does not play.
Remedy
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side
facing up.
• The disc is not correctly inserted.
• The DVD recorder cannot play certain discs (such as a CDROM) (page XX).
• The region code on the DVD VIDEO does not match the DVD
recorder (page XX).
• Moisture has condensed inside the DVD recorer. Remove the
disc and leave the DVD recorder turned on for about half an
hour until the moisture avaporates (page XX).
• If the disc was recorded on another recorder, the DVD
recorder cannot play the disc if it was not finalized (page XX).
• Resume play was activated (page XX). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
The DVD recorder starts playing from the
disc automatically.
• The DVD VIDEO features an auto playback function.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the
disc.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
The language for the sound track cannot
be changed.
The subtitle langusge cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when "ANGLE" does not
appear on the TV screen (page XX).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
Recording does not start immediately
after you press REC button.
Nothing was recorded even though you
set the timer setting correctly.
Recording does not stop immediately
after you press STOP C button.
Timer recording is not complete or did
not start from the beginning.
• Set the TV's input to "TV."
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the DVD recorder to automatically format a DVD-RW.
•There was a power failure during recording.
• The DVD recorder's internal clock stopped due to a power
failure that lasted for more than 30 sec.
Reset the clock (page XX).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts
copying.
• The timer setting overlapped with another setting that was set
later or has priority.
• It will take a few seconds for the DVD recorder to inout disc
data before recording can stop.
• The timer setting overlapped with another setting that was set
later or has priority (page XX).
• Disc space was not enough.
103
Others
The disc does not start playback from the
beginning.
E6500UD.QX
03.12.8
19:07
Page 104
Others
Symptom
Remedy
Remote control
The remote does not function.
• Batteries are weak.
• There are obstacles between the remote and the DVD
recorder.
• The remote is too far from the DVD recorder.
• There are no batteries in the remote.
• Turn on the DVD recorder.
•The remote is not pointed at the remote senser on the DVD
recorder.
Others
The DVD recorder does not operate
properly.
• When static electricity, etc., causes the DVD recorder to
operate abnormally, unplug the DVD recorder and then plug it
in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the DVD recorder is adding disc data to the
disc.
Quick Guide to DVD disc types
Refer to the following when selecting a disc (DVD-RW or DVD-R) and a recording format (VR mode or
Video mode for DVD-RW discs).
: Most suitable.
: Can be used.
: Some functions are limited.
DVD-RW Video
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
Rewritable?
Yes
Yes
No
Can create chapters at fixed intervals (auto.)
Yes
Yes
Yes
Can create chapters wherever you like (manual)
Yes
No
No
Can record 16:9 size pictures
Yes
Yes
Yes
Can record Copy-Once programs
Yes
No
No
Can perform basic edit functions
Yes
Yes
No
Can perform advanced edit functions (Playlist edit)
Yes
No
No
You want to
DVD-RW VR
: Cannot be used.
Record TV programs
Reuse by deleting unwanted contents
Edit recorded contents
Edit/Record from connected equipment
Copy discs for distribution
*1
Play on other DVD equipment
*1
Features
Recording
Editing
*1
104
DVD-RW (VR mode) can only be played on DVD
equipment that is VR compatible.
Note:
For details of the above functions and implied
restrictions, see the explanations inside the manual.
E6500UD.QX
03.12.8
19:07
Page 105
Others
Language code
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
(Afan) Oromo
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
105
Others
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
E6500UD.QX
03.12.8
19:07
Page 106
Others
Notes about discs
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface. Dust, fingerprints, or
scratches on the disc may cause it to malfunction.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature may
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the disc
from the center out.
106
• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray
intended for vinyl LPs.
• Do not use teh following discs.
–A disc that has a non-standard shape (e.g., card,
heart).
–A disc with a label or sticker on it.
–A disc that has celophane tape or sticker adhesive
on it.
E6500UD.QX
03.12.8
19:07
Page 107
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs
are 4:3 (in other words, the
screen is almost square);
widescreen models are 16:9 (the
screen is almost twice as wide as
it is high).
Digital audio
An indirect representation of
sound by numbers. During
recording, the sound is measured
at discrete intervals (44, 100
times a second for CD audio) by
an analog-to-digital converter,
generating a stream of numbers.
On playback, a digital-to-analog
converter generates an analog signal based on these numbers. See
also Sampling frequency and
Analog audio.
Regions code
Regions associate discs and players with particular areas of the
world. This unit will only play
discs that have compatible region
codes. You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Others
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
PCM
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared to formats such as Dolby
Digital and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT)
and AV amplifiers with digital
inputs, this unit can convert
Dolby Digital and MPEG audio to
PCM. See also Digital audio.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs and Video CDs use
tracks to divide up the content of
a disc. The DVD equivalent is
called a chapter. See also Chapter.
Dolby Digital
With multichannel audio, this high
quality surround system is used in
many movie theaters around the
world.
107
E6500UD.QX
03.12.8
19:07
Page 108
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty
does not apply to any product not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures due to defects in material or
workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper
maintenance, commercial use such as hotel, rental or office use of this product or damage which results
from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY
THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call 1-800-968-3429 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-968-3429
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China
0VMN03892 / E6500UD ★★★★★