Download Magnavox MRD410B/F7 System information
Transcript
MRD410B/F7 Home Theater System _ _ i __i_iii_ _ _ __ i_%_i_:_ _i i_h_i_ _h_££i_ il__ii__!_II_I © 2010 Funai Electric Co., Ltd. Themodel andserial numbers ofthisunitmaybefound onthecabinet. You should record andretain those numbers forfuture reference. WARNING: Model No.: Serial No.: TO REDUCETHE RISKOF FIREOR ELECTRICSHOCK, DO NOT EXPOSETHIS APPARATUSTO RAIN OR MOISTURE. APPARATUSSHALL NOT BE EXPOSEDTO DRIPPINGOR SPLASHINGAND NO OBJECTS FILLEDWITH LIQUIDS,SUCHAS VASES,SHALL BE PLACEDON THE APPARATUS. CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated"dangerous voltage"within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance, TO REDUCETHE RISKOF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTSINSIDE. REFERSERVICING TO QUALIFIED SERVICEPERSONNEL. cabinet.Theimportantnoteislocatedontherearorbottomofthe _ The symbol for CLASS Il (Double lnsulation) IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. 3. 4. Keep these instructions. Heed all warnings. Followall instructions. 5. Do not usethis apparatus 6. 7. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. near water. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-O03. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. 2 EN CAUTION: WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. LASER SAFETY This apparatus employs a laser. Only a qualified apparatus, due to possible eye injury. CAUTION: service person should remove the cover or attempt Use of controls or adjustments or performance of procedures result in hazardous radiation exposure. Laser radiation when open. Do not stare into beam. Inside, near the BD mechanism. CAUTION: LOCATION: IMPORTANT COPYRIGHT Unauthorized copying, broadcasting, other than those specified herein may INFORMATION public performance This item incorporates copy protection rights of Rovi Corporation. to service this technologythat Reverse engineering Do not place the unit on the furniture and lending is protected and disassembly of discs are prohibited. by U.S. patents and other intellectual property are prohibited. that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus. To Avoid the Hazards of Electrical Shock and Fire • Do not handle the AC power cord with wet hands. • Do not pull on the AC power cord when • Do not put your fingers or objects Location and disconnecting it from an AC outlet. Grasp it by the plug. into the unit. Handling • Do not install the unit in direct sunlight, • Avoid a place with drastic temperature near strong magnetic fields, or in a place subject to dust or strong vibration. changes. • Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit. • Depending on the environment, the temperature • Be sure to remove the disc and unplug Dew Condensation of this unit may increase slightly. This is not a malfunction. the AC power cord from the outlet before carrying the unit. Warning • Dew condensation may form inside the unit in the following hours until its inside gets dry. conditions. If so, do not use this unit at least for a few - The unit is moved from a cold place to a warm place. - Under conditions of high humidity. - After heating a cold room. Note about Recycling • This unit's packaging materials are recyclable and can be reused. Please dispose of any materials accordance with your local recycling regulations. • Batteries should never be thrown away or incinerated regulations concerning chemical wastes. Notice for Progressive but disposed of in accordance in with your local Scan Output • Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it is recommended that the user switch the connection to the 'standard definition' output. If there are questions regarding your TV set compatibility with this 480p BD/DVD player, please contact our customer service center. ENERGY STAR ® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. EN 3 FUNCTION SETUP INTRO©UCTION Safety Instructions ......................................................................... Supplied Accessories ................................................................... 5 Trademark Information ............................................................... 5 How to Navigate Features ............................................................................................ 6 Audio Output ............................................................................... 42 Parental ........................................................................................... 44 Symbols Used in this Manual .................................................... 6 Front Panel ....................................................................................... 7 through the Setup Menus .....................36 List of Setup Menus .................................................................... 36 TV Aspect ....................................................................................... 42 fun-Link(HDMI CEC) ................................................................... 44 Rear Panel ......................................................................................... 7 One Touch Remote Control .............................................................................. 8 Standby Front Panel Display ....................................................................10 System Information .............................................................. 44 System Audio Control ......................................................... 44 CONNECTIONS Placing the Speakers .................................................................11 Connection to the TV ................................................................ 11 HDMI Mode and Actual Output Connecting Signals .......................13 Speakers and Subwoofer Finding .................................................................................... 44 Software Update ......................................................................... 45 Current Version ...................................................................... 45 Disc Update ............................................................................. 45 Initialize .......................................................................................... 45 ................................14 Connecting Audio from Cable Box/Recorder/Game Console orTV .......................................................................... 15 Connecting Connecting Play ...................................................................... 44 OTHERS Troubleshooting .......................................................................... 46 Portable Media Player ......................................16 FM Radio Antenna .............................................16 Glossary .......................................................................................... 47 Language Code List .................................................................... 49 the Video Channel on Your TV ..............................17 Specifications ............................................................................... 50 Maintenance ................................................................................. 51 PLAYBACK LIMITED WARRANTY .................................................back cover Information on Playback .......................................................... 18 Howto Insert a Disc ................................................................... 21 Reading the SD Memory Card ...............................................21 Selecting the Media Mode ......................................................22 Playing Backa BD ora DVD ....................................................23 Playing Back an Audio CD or a Disc with MP3 / Windows Media TM Audio / JPEG Files ..............................24 Kodak Picture CD ........................................................................ 25 Fast Forward / Fast Reverse ....................................................26 Slow Forward Playback ............................................................ 26 Step by Step Playback .............................................................. 26 Repeat Playback .......................................................................... 26 Program Playback ...................................................................... 27 Random Playback ....................................................................... 28 Adjusting the Picture ................................................................ 28 PIP (BONUSVlEW) Setting ........................................................ 29 Camera Angle .............................................................................. 29 Search ............................................................................................. 30 Switching Subtitles .................................................................... 31 Switching Audio Soundtrack .................................................31 Setting the BD Audio Mode ....................................................32 Volume Control ........................................................................... 33 Selecting Surround Selecting Sound Effect Mode .................................................33 Mode .......................................................33 Switching Active Source Mode .............................................34 Sleep Timer ................................................................................... 34 Play from Portable Media Player ...........................................34 Radio Operations ........................................................................ 35 4 EN Remote Control x 1 (NC000UD) Batteries (AA, 1.5Vx2) H Video cable FM wire 1 center,2 (WPZ1520TM002/ WPZ152SCP003) antenna (WX1Eg000-081) 2 rear speakers and 1 subwoofer ITIII ° HIGH-D_INITIONMUlTIMeDIAINTER_ACE HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. front, is a trademark Corporation. Owner's Manual QuickStart Guide (1VMN29273) (1VMN29274) of DVD Format/Logo BONUS VIEW "BONUSVIEW" is trademark Licensing TM of Blu-ray Disc Association. rTI DOLB_ DIGITAL PLUS 1 PRO LOGIC II ] Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Java Java and all other Java trademarks and Iogos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries. POWERED Windows Advanced DigitalOut Media _ Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Advanced Digital Out and the DTS Iogos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Kodak Picture CD COMPATIBLE "Blu-ray Disc" and +_,_ are trademarks. J Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. is a trademark of Eastman Kodak Company. © 2010 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without without the obligation to notify any person or organization notice. Funai reserves the right to change of such changes. the content herein F'UNAI with the I_ design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. EN 5 Blu-ray Disc You can enjoy Blu-ray Disc which is capable of storing five times more data than a conventional DVD. Connect this unit to your HDTV with one single HDMI (HighDefinition Multimedia Interface) cable. It is recommended to BD-Java use a High Speed HDMI Cable for better compatibility. high definition video output signal will be transferred With some BDs which enjoy the interactive menus. support Java applications, functions such as games HDTV without you can excellent noise. or interactive Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution with multi-channel surround sound capabilities for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more to-life true- conversion picture Thanks to your signals, quality, so you will get completely free from to other multiple outputs, you can also easily connect home theater system or amplifier. HDMI Deep Color Deep Color reduces posterization image. Refer to "HDMI page 37. fun-Link(HDMI picture. to analog and sound The to your This unit effect Deep Color" of the playback in "FUNCTION SETUP" on CEC) supports fun-Link(HDMI CEC), which allows DVD upscaling for enhanced picture quality Your current DVD will look even better than before thanks to integrated standard. video upscaling. Upscaling will increase the resolution of standard definition DVD to high definition up to 1080p over an HDMI connection. The picture will be less jagged and more realistic for a near high definition experience. This function Enjoy your content on different kinds of media Full backwards compatibility with DVD, CD and SD card ensures that you can continue to enjoy your current audiovideo collection. Additionally, you can view JPEG digital pictures or listen to MP3 or Windows Media TMAudio music files. material with the frame rate of 24 frames per second with progressive scan. (Available only when the TV is connected by an HDMI cable and compatible with 1080p24 frame input.) Refer to "HDMI Video Resolution" in "FUNCTION SETUP" on Listen to rich multi-channel HDMI control output protection back the connection, protection PIP function which enables you to scene contains the secondary Pop-up menu Some BD-video have pop-up menu that can be called video. menu which which can provide of film originated system that called images pop-up on the disc. other extras for BD-ROM Card and play back with Profile commentary, 1 ver.1.1 both (high-bandwidth HDCP data is copy encryption AV device. This unit the operating instructions more information. the unit a copyright and digital content technology and authentication supports of your the protection protection To specify which put the following HDCP. of the Please read TV (or AV amplifier) media type each function symbols at the beginning for is applicable to, we of each item to operate. D- Playing back contents from an SD Memory You can play back MP3 / WMA / JPEGs stored Memory Card. You can store picture-in-picture of a BD / DVD via an that support HDCP system). comprises connected video on the TV screen You can call up the pop-up / MENU]. Contents in the vary depending devices. is a navigation up and be operated without interrupting playback. menu by pressing [POP MENU menu a feature playback it is necessary PIP (BONUSVIEW) have the on some system digital TV (or an AV amplifier) BD-videos properly and is part of the HDMI page 37. Copyright HDMI displaythe secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the HDMI (BD only) This unit is equipped with smooth movement during Multi-channel surround sound, which recognizes real-to-life sound and makesyou feel like you are really there. Some over may not work 1080p24 To play surround sound system Card in an SD subtitles Description refers J 0 to BD-video (ver.2.1) / BD-R (ver.1.1/1.2/1.3) BDMV format or and BD-RE recorded in files in an SD Memory the BD-video. Description refers to DVD-video Description refers to audio CD/DTS-CD Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with MP3 files Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with Windows Media TM Audio files Description refers to BD-RE/-R,DVD-RW/-R, CD-RW/-R and SD Memory Card with JPEG files If you do not find function 6 heading, any of the symbols the operation listed above is applicable under the to all media. EN 1 2 3 5 4* 6 7 8 12 (*) The unit can also be turned 1. STANDBY/ON on by pressing these 11 buttons. 7. (b button •/• button the you 8. unit. 9. • Press to stop playback. PLAYI_ button* on. 10. • Press to start or resume playback. SOURCE button 2. 3. • This indicator lights up in red when the power is in the standby mode. Disc tray 4. • Place a disc after opening OPEN/CLOSE_ button* 5. • Press to open or close the disc tray. Infrared sensor window the disc tray. • Receive signals from your remote control can control the unit from a distance. VOLUME • Press to adjust the volume. STOP• button • Press to turn on the unit, or to turn the unit into standby mode. (To completely turn offthe unit, must unplug the AC power cord.) • Press and hold for 10 seconds to shut down the • This button lights up in red when the unit is in standby mode and turns offwhen the power is STANDBY/ON indicator 6. 9"10 • Press to switch the active source mode. 11. MP3 LINE-IN jack • Use to connect your portable 3.Smm stereo audio cable. 12. SD CARD slot audio player with • Insert an SD Memory contents in it. Card and play back the 3 567 so that you Display • Refer to "Front Panel Display" on page 10. 2 4 8 1. AC power cord • Connect to a standard this unit. AC outlet to supply power to • Unplug this cord from the AC outlet to completely turn offthe unit. 2. 5.1ch Audio Out jacks • Use to connect 3. HDMI (SPEAKERS (4£_)) supplied 5.1 ch speakers. OUT jack • Use to connect to a display with an HDMI compatible port with an HDMI cable. 4. AUDIO IN (AUX) jacks 6. DIGITAL AUDIO IN (Coaxial) jack • Use to connect an other device with a digital audio coaxial output jack with a digital audio coaxial cable. 7. COMPONENT VIDEO OUT jacks • Use to connect a TV monitor with component inputs with a component video cable. video 8. VIDEO OUT jack • Use to connect a TV monitor, an AV receiver/ amplifier or other device with a video cable. • Use to connect an other device with audio out jack with an audio cable. 5. FM ANT 75_ jack • Use to connect the supplied EN FM wire antenna. 7 9. SETUP buttons • Press to display the setup menu. 10. VOL. +l-button • Press to adjust the volume. 11. _ (reverse) button • During playback, 12. I_ (play) button* press to fast reverse the playback. • Press to start playback 13. _ (skip) button or resume playback. • During playback, press once to return to the beginning of the current title, chapter or track. • During playback, press twice to return to the previous title, chapter or track. • During the JPEG playback, press to return to the previous file. 14. • (stop) button • Press to stop playback. 1S. I I (pause) button • Press to pause playback. • When playback is in pause mode, press repeatedly to forward the playback step by step. 16. AUDIO button DISC: • Press to select the audio channel (such as audio languages). RADIO: • Press to switch between stereo and mono mode. 17. SURROUND button I II ._, 13 -,,,,,,,_iOTi,,,L_ 14 17 Ill TiiO ? ? 18 18. • Press to select surround SOUND MODE button mode. 19. • Press to select a sound effect mode. MUTE button • Press to mute the volume. (*)The unit can also be turned on by pressing these buttons. 1. STANDBY/ON d_ button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn offthe unit, you must unplug the AC power cord.) 2. DISPLAY button • Press to display the on-screen 3. SUBTITLE button • Press to display the subtitle 4. Number buttons display menu. menu. • Press to enter the title, chapter, track or file number. • Press to enter values in the input field. 5. SEARCH button • Press to display the search menu. 6. RED / GREEN / BLUE / YELLOW button • Press to select items on some BD menus. • When file list / thumbnail list is shown, press to switch between pages. 7. TOP MENU button BD: • Press to display the top menu. DVD: 20. MODE button • During BD or DVD playback, press to display the setting for the picture adjustment. • During BD playback, press to turn the picture-inpicture feature on or off (only applicable to BD-video which supports the PIP function). • During the JPEG playback, press to display menus for changing the visual effect for switching the image or changing the size of the image. • In stop mode with BD inserted, press to display a menu for setting the BD audio mode. • In stop mode with audio CD or MP3 / WMA / JPEG files inserted, press to display menus for program and random playback. 21. _ (skip) button • During playback, press to skip to the next title, chapter, track or file. 22. _ (forward) button • During playback, press to fast forward the playback. • In pause mode, press to slow forward the playback. 23. SOURCE + / - button • Press to switch the active source mode; "Disc / SD", "Aux", "Coaxial", "MP3 Line-in" or "FM". • Press to display the title menu. 8. • / • / _1 / I_ buttons DISC: • Press to select items or settings. RADIO: • Press up or down to tune the radio frequency. • Press left or right to start auto search. 8 EN 24. RETURN button 25. • Press to return to the previously screen. OK button 26. • Press to confirm or select menu items. POP MENU / MENU button BD: • Press to display the pop-up DVD: 27. displayed menu 3 Close the cover. menu. • Press to display the disc menu. CLEAR button DISC: • Press to clear the information once entered or to cancel the programming for audio CD, etc. RADIO: 28. • Press to erase the selected preset station. ANGLE button 29. • Press to access various camera angles on the disc. • Press to rotate the JPEG files clockwise by 90 degrees. REPEAT button 30. • Press to toggle between OPEN/CLOSE___ button* 31. • Press to open or close the disc tray. SLEEP button various repeat modes. • Press to set the sleep timer. Install AA (1.5V) battery x 2 matching indicated inside battery compartment control. the polarity of the remote 1 Open the cover. Remote Control Usage Guidelines: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. • The maximum operable ranges from the unit are as follows. 2 Insert batteries. - Line of sight: approx. 23 feet (7 m) Either side of the center: approx. 16 feet (5 m) within Make sure to match + and - on the batteries marks indicated EN in the battery - Above:approx. 16 feet(5 m) within 15 ° - Below: approx. 10 feet (3 m) within 30 ° 30° to the compartment. 16 feet 23 feet 16 feet (S m) (7 m) (S m) 9 1 2 C_ _O i-!-i _'::v "'" i ""i :'" i i •i'"i _! I . IE _IIIIL • ?1 ii LIIIL • AIIIL """ I_ _ i i: i""" i • •1 _IIIL • iii AIIII_ "'" i" i l ii AIIIL • I II 3 Brightness 4 of the display can be adjusted. icon, (Appears Refer to "Panel during repeat Display" in "List of Setup Menus" 1. Displays repeat 2. Displays media mode icon (disc mode or SD card mode). 3. Displays playback on page 40. playback.I status icon. Refer to table A below. 4. Displays source mode status (refer to table B below) or information repeat type, menu type, etc. <Table A> such as title number, elapsed playing time, <Table B> • When switching displayed. i_" the source mode, the following will be Playback is in progress i..... ii_iii S:_I i]ii ill i_iii Stop mode c_ _ _ ,, ii ii Pause mode •.,, _'_" Fast forward mode Tuning radio station (in FM mode) .,., ":!:! Fast reverse mode Tuning radio station (in FM mode) _:. i_'_i [iiiii "Disc/SD" Slow forward "Aux" mode i''i L i /_ f fi IT:::Iii ............ -!.. i<_ _i "Coaxial" i",i i!:_i "MP3 Line-in" iZ tL.,._i mode "FM" mode mode Disc is being played back. Indicating the current title number chapter mode i"_i i....3 !!!!il [_.. i[i i"'i i i(i _._., i::?1Current mode is in chapter (Frequencyofradiostationwill be displayed.) and the elapsed time. repeat mode during playback of disc. O Loading ....[iiiiii:::::i [i [ N O 13111 _,.2 ..... S 10 ' " I a disc and the unit is in Disc/SD Dolby Digital audio is being played DTS audio is being played card mode. back during back during playback playback of disc. of disc. EN Make the following connection to ensure an optimum 1 Place the front left and right speakers degrees from the listening position. sound experience. at equal distances from the TV and at an angle of approximately 2 Place the center speaker above the TV or the main unit so that the center channel's 3 Place the rear speakers 4 Place the subwoofer at normal listening 45 sound is localized. ear level facing each other. at the corner of the room. Otherwise, keep it at least one meter away from the TV. Not 111_. Choose the (A, appropriate then proceed to the corresponding instruction B or C) on connection, the pages 12-13. Best (Supports up to 1080i, 1080p, 1080p/24 resolution.) Your TV HDMI cable I EN HDMI IN Go To A 11 CONN£C"[IONS Better (Supports up to 1080i resolution.) cOvW=+_,===_ d" YourTV PB/CB Go To B PR/CR Basic (Supports only 480i resolution.) YourTV ...... N cab,__ Video • Connect this unit directly to the TV. If the video cables are connected copy right protection system. Connect the cables by following to a VCR, pictures the descriptions G_IT_I may be distorted _ C due to the below. HDMI Connection YourTV A i HDMI IN 12 EN CONN£C'[IONS Component Video Connection YourTV B i VIDEO IN Y ,°,.°°°,°°°°'°°°° PBtCB PWCR Component video cable Standard Video Connection C YourTV °°° °o° You can change the resolution of the video signal being output from the HDMI OUTjack in the setup menu. For details, refer to "HDMI Video Resolution" on page 37. Copyright protection system To play back the digital video images ofa BD-video or DVD-video via an HDMI connection, it is necessary that both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (highbandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV receiver / amplifier) for more information. av IDe Iilm] 'ei ,av toiiii ,] EN HLI 13 CONN£C"[IONS 0 SUBWOOFER 7 Connect 2 14 the speaker FRONT CENTER REAR RIGHT cables to the matching REAR LEFT FRONT RIGHT FRONT LEFT color sockets on the speakers. Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit. Make sure that the colors of the cables and sockets are matched. EN CONN£C"[IONS • This unit provides analog and digital audio connection. You can connect the audio output from an audio / video device (e.g. DVD Recorder, VCR, Cable / Satellite Box, game console or TV) to this Blu-ray Disc Home Theater in order to enjoy the multi-channel surround sound capabilities. Cable / Satellite Box ooO°_ °° °°o °°o oO° ...'" YourTV Audio cable °°o° __ _ Digital audio coaxial cable I ...._- DVD Recorder / VCR [ ............. • Use an audio cable (not supplied) to connect the AUDIO IN (AUX) jacks on the main unit to the AUDIO OUT jacks on the connected device. • Use a digital audio coaxial cable (not supplied) to connect the DIGITAL AUDIO IN (Coaxial) jack on the main unit to the DIGITAL OUT (Coaxial) jack on the connected device. EN 15 CONN£C"[IONS 1....... Connect a 3.5mm stereo audio cable(not on your portable media player. 7 Connect 2 16 the supplied Extend the FM antenna FM wire antenna supplied) (19 I_. to the MP3 LINE-IN jack on this unit and the headphone jack to the FM ANT 75_ jack on this unit. and fix its ends to the wall for optimum reception. EN CONN£C"[IONS After you have completed all tie connections, you must find tie correct video channel (external input channel) on your TV, After have made all the necessary connections, on theyou unit. press [STANDBY/ON _] to turn Turn on your TV. 3 EN Press the button on the TV's remote control that accesses the external input channel. It may be labeled "SOURCE", "AV" or "SELECT" (refer to your TV's user manual). 17 Before you start playing This unit is compatible back a disc, read the following to play back the following information. discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following Iogos. Other disc types are not guaranteed to play back. Blu-ray Disc - BD-video (single / dual layer) - BD-REvet. 2.1 (single / dual layer) (Recorded in BDMV format) - BD-R ver. 1.1 / 1.2/ 1.3 (single / dual layer) (Recorded in BDMV format) (Unclosed discs may not be played back.) _11 Blu,fayo/sc DVD-video VIDEO DVD-RW O RW DVD-R R CD-DA (audio CD) _ i°_[]_ DIGITAL AUDIO CD-RW DIGITAL AUDIO The following CD-ROM CD-R discs will not be played back in this unit. • CD-I (compact disc-interactive) DVD-RAM DVD-audio o,_, ...... ,o • VSD (video single disc) • Video CD HD DVD Kodak Picture CD Unfinalized Picture CD BD-RE (venl.0) BD-RE (ven2.1) (Recorded in BDAV format) BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format) BD / DVD / CD / SD Memory Card contains DivX ® files. BD / DVD hybrid disc (played back as a BD-video only) DVD-RW/-R recorded in non compatible recording format. COMPATIBLE DTS-CD MP3 Windows BD-RE/-R DVD-RW/-R CD-RW/-R Media T_Audio SD Memory JPEG SD Memory Card (8 MB - 2 GB) SDHC Memory Card (including miniSD Card microSD Card MP3, Windows SDHC) miniSD Card (8 MB - 2 GB) microSD BD-ROM Profile 1 vet.1.1 Card (8 MB - 2 GB) disc Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super Audio CD layer cannot be heard. Playability of dual discs are not guaranteed. This unit cannot play back the disc contents protected by Windows Media TM Digital Rights Management (DRM). Media T_ Audio, JPEG, picture-inpicture commentary, subtitles or other extras for 18 Card (4 GB - 8 GB) • SVCD Kodak EN BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You cannot play back the disc recorded in other color systems. BD-video This unit has been designed to play back BD-video with region "A" and DVD-video @ with region "1" or "ALL". You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the symbols on the right on your BD-video DVD-video. or labeled for a specific region can only be played back in the unit with the same region code. of BD / DVD are generally Titles may be further subdivided To call the on-screen display about the current disc by menu, press [DISPLAY] during playback. Every time you press [DISPLAY], the information changes. Depending on the media, available information varies. off •,_ •_ •_ ,_ Title / Chapter information Title information (elapsed time) Title information (remaining time) Decoding format information ,_ off off •,_ •_ •_ •_ ,,_ Chapter information (elapsed time) Chapter information (remaining time) Title information (elapsed time) Title information (remaining time) Decoding format information ,_ off DVD-video If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video The contents You can check information pressing [DISPLAY]. divided % into titles. into chapters. Track information (elapsed time) •,_ Track information (remaining time) •_ Disc information* (elapsed time) •_ Disc information* (remaining time) •_ Track information (elapsed time) (* not available during program / random playback) BD / DVD -- title 1 title 2 chapter 1 chapter 2 I I chapter 1 chapter 2 I I chapter 3 off (File information (elapsed time)) •_ File name information I •_ off(File audio CD are divided information (elapsed time)) into tracks. , audio CD , .olc, .oi, .oi, .oc,41 Data discs or SD Memory Cards containing MP3 / WMA / JPEG are divided into folders, and the folders are subdivided into files. off (File information (elapsed time)) •_ File name information •_ Tag information (title name) •_ Tag information (artist name) •_ off(File information (elapsed time)) off ,_ File information ,_ File name information ,_ off MP3 / WMA / JPEG - folder (group) 1 --_ file 1 EN file 2 __folder file 3 (group) 2 __ file 4 file 5 19 Chapter Disc information information <Title / Chapter information for BD> _/Current <Chapter information _l for DVD> track number / Total number Elapsed time (or remaining of tracks time) of the current disc File name information I_ Current title number Ii_ Current chapter number / Total number of chapters I_ Current repeat setting (Only when repeat setting active) (C: Chapter repeat, T: Title repeat) is El Indicates that the multi camera angle images are available on the scene _i_/Current playback Media icon and file name :MP3 files :WMA files status Ii_ Elapsed time (or remaining chapter time) of the current Title information : JPEG file Tag information <Title name information> _i_ Current _ title number / Total number Elapsed time (or remaining of titles time) of the current title <Artist name information> Track / File information I_l Title name based on tag information Windows Media TM Audio file I_ Current track (file) number / Total number of track (file) Iii_ Elapsed time (or remaining track / file Indication of SD Memory Decoding format information Card playback repeat setting (Only when repeat setting is active) (T: Track repeat, G: Group repeat, A: All repeat) 20 of current time) of the current (except for JPEG files) _/Current I_l Artist name based on tag information Windows Media TM Audio file of current Decoding format EN 2 1 2 Use [A /V] to select "SD Card", then press [OK]. Press [OPEN/CLOSE _] to open the d isc tray• Place the disc on the disc tray with its label side facing up. • Media filter screen will appear. • When the SD Memory Card contains one type of file, skip to step 4. Align the disc to the disc tray guide, only 3 Select the type of the file you want to play back in the media filter screen• Then press [OK] to display the file list. 4 Use [A /V] to select a desired track, folder or file, then press [OK]. Use [_1/I_] to go back and forward between the hierarchies• • If you press [OK] on the desiredfile, playbackwill start. • Make sure the disc is compatible with this unit. (Refer to page 18 for the list of compatible discs.) 3 Press [OPEN/CLOSE m_] to close the d isc tray. To eject the disc: Press [OPEN/CLOSE Remove the disc. ___]to open the disc tray. Press [OPEN/CLOSE ___]to close the disc tray. To remove the SD Memory Card: In stop mode, gently push in the SD Memory Card, then pull it out slowly. You can play back the MP3 / WMA/JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM Profile 1 ver.l.1 which can be downloaded from the Internet. You can store the contents on an SD Memory Card via computer and play them back with the BD-video. For more information about the special additional contents, please refer to the instruction book that came with the disc. 1 Insert an SD Memory Card, with the label side facing up, into the SD CARD slot until it clicks• If no disc is in operation, "Media Select" screen will appear on the TV screen. EN 21 For the playback media to be read by this unit, the correct mode by following the steps below. "Media unit is in Disc / SD card mode. lUl_m f_ Q Q media mode should Select" is available be selected. You can switch the media only when an SD Memory Card is inserted and this 1 In stop mode, press [SETUP]• 2 Use [A IV] to select _, [OK]• then press 3 Use [A IV] to select "Media 4 Press [OK] repeatedly desired media• Select". to select the MODE SOUND AUDO 22 / !R(I JND MOD MUT 5 Press [SETUP] to exit• • Selected media mode is now activated. EN OPHi STANDBY/ON BSPAY SLB/YLE SLEEP (LOS AN6H /![PLAT 1 2 3 4 /................. L,o,o,} {: AR( } [!D g.l// OP _/F/U Turn on the TV and select the appropriate input on the TV to which the unit is connected• Insert a disc (refer to "How to Insert a Disc" on page 21 ). Playback may start automatically• If not, press [1_ (play)]. Some discs may show a title or a disc menu. In such case, refer to "Using the Title / Disc / Pop-up Menu" on page 24. To return to the normal Press [1_ (play)]. fEHOW playback: To stop playback: Press [] (stop)]. Playback will be in Resume-On-Stop POP IVIENU! _EN_ //<>" _)]• To pause playback: Press [i i (pause)]. CLEAR GRQN Press [STANDBY/ON mode. Resume-On-Stop mode . !2:x;;}C If a playback is in Resume-On-Stop mode, when you press [1_ (play)] next time, the playback will start from the point where it has been stopped. )X/, Note • Resume playback may not be available for the BD that supports Java applications (BD-Java). • In the "Disc" mode, the resume information will be cleared when; - [] (stop)] mode. - the parental is pressed while in the Resume-On-Stop level is changed. - the disc tray is opened. M(DE BOUND AUD( SURR(:)ND MOB /_4Ut£ • In the "SD Card" mode, the resume information will be cleared when; - [] (stop)] is pressed while in the Resume-On-Stop mode. - the SD Memory - the unit is turned EN Card is removed. into the standby mode. 23 Many of BD-video and DVD-video discs contain (BD-video / DVD-video), disc menu (DVD-video) title menu or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Before you begin, make sure the correct media mode is selected. Refer to "Selecting the Media Mode" on page 22. 1 Title menu (BD-video / DVD-video) 1 Press[TOP MENU]. 2 Use [A / • / <1/ I_] to select an item, then press [OK]. 3 Press[TOP MENU] to exit. • Media filter screen will appear. • For audio CD and a disc contains type of file, skip to step 3. Select the type of the file you want to play back in the media filter screen• Then press [OK] to display the file list. 3 Use [A / V] to select a desired track, folder or file, then press [OK]. Use [_1 / I_] to go back and forward between the hierarchies (only for MP3 / WMA/JPEG files)• 1 Press[POP MENU / MENU]. Pop-up menu (BD-video) This is a special feature available only one 2 Disc menu (DVD-video) 2 Use [A / • / < / I_] to select an item, then press [OK]. 3 Press[POP MENU / MENU] to exit. Insert an audio CD or a disc with MP3, WMA or JPEG files• • If you press [OK] on the desired file, playback will start. for some BD-videos. When you press [POP MENU / MENU], a menu pops out on the TV screen during play back. I Duringthe [POP MENU playbackof BD-video, press / MENU]. 2 Use [A / • / < / I_] to select an item, then press [OK]. 3 Press [POP MENU / MENU] to exit. e.g.) JPEG _ audio CD : Track information MP3 / WMA / : File information JPEG audio CD : "CD-DA" will be displayed. MP3 / WMA / : Current Disc or folder name will be JPEG displayed. i_]] audio CD : List of the track number and time. MP3 / WMA / : List of the file / folder names in the JPEG current folder / disc Operation guide Current _ 24 Playback : Press [RED] to go to the previous page. Press [GREEN] to go to the next page. Press [YELLOW] to select "Media Mode" page / Total page number status EN Icons: Folder This unit can also run JPEG files stored on Kodak Picture audio CD tracks CD. You can enjoy picture images on the TV set by playing back the Kodak Picture CD. This unit conforms to ver.7.0 of MP3 files Kodak Picture CD. For details of Kodak Picture CD, contact a shop that provides developing service of Kodak Inc. 1 WMA files JPEG files 4 When Kodak Picture CD is inserted in this unit, Kodak Picture CD menu will appear automatically on the TV screen• Press [11 (stop)] to stop playback• It is recommended unit are recorded <MP3/Windows that files to be played back in this under the following specifications: Media • Sampling frequency • Constant bit rate <JPEG> • Upper limit • Lower limit • File sizeofimage maximum TM Audio> 32 kHz, 44.1 kHz or 48 kHz 112 kbps - 320 kbps (MP3), 48 kbps - 192 kbps (Windows Media TM Audio) 2,560 x 1,900 dots (sub sampling 4:4:4) 5,120 x 3,840 dots (sub sampling up to 4:2:2) 32 x 32 dots is is i_ File information Ii_ Current I_ page / Total page number Operation guide: 12MB Press [BLUE] to go to the previous page. Press [YELLOW] to go to the next / page. _/Playback 2 status Use [A / • / _I / I_] to select a desired file to be played back, then press [I_ (play)] or [OK]. • An image will be played back from the selected file and go to the next one in turn. 3 Press [11 (stop)] to stop playback• To return to the first item: Press [TOP MENU]. To return to the file played last: Press [POP MENU / MENU]. EN 25 ii!iiii ii_ i_iiiiiiiiiiiiui_ec_i_ 1 In pause mode, press [I I (pause)] repeatedly. lOCK Every time you press [I I (pause)], playback will advance one step at a time. _i_iHi_iiiiiiii|ii_iiiii_ini PlaV]3 F411 2 Press [I_ (play)] to return to normal playback. [ 'Sm_ll 1 During playback, repeatedly press [P_ Available repeat functions vary depending the discs. 1 During playback, press [REPEAT] repeatedly select the desired repeat mode. (forward)] for fast forward. During playback, for fast reverse. press [_1_1(reverse)] repeatedly Every time you press [1_1_(forward)] or [_1_1(reverse)], the playback speed will change. 2 Press [I_ (play)] to return to normal to playback. The current chapter will be played back repeatedly. The current title will be played back repeatedly. The current repeatedly. track will be played back The current folder will be played back repeatedly. All tracks or files in the media will be played back repeatedly. 1 During playback, press [I I (pause)], then press [IIHI_(forward)]. Every time you press [1_1_(forward)], playback speed will change. 2 Press [I_ (play)] to return to normal playback. 26 EN 3 Press [I_ (play)] to start program playback. • The program playback will start. You can play back the disc/card 1 In stop mode, 2 Use [A / v] press to select in your desired order. [MODE]. a track / folder / file, then press [OK]. To exit from the program playback mode: • Press[RETURN] in stop mode. e.g.) audio CD _1 audio CD MP3 / WMA / JPEG : Track information : File information audio CD MP3 / WMA / JPEG "CD-DA" will be displayed. : Current Disc, SD Memory Card, or folder name will be displayed. Track/Folder/ File list : Track / Folder / File list in the I_41Programmed original order. list : Track / File list in the programmed E1 cumulative playback programmed order. time of all tracks in the list. (audio CD only) Playback status _/Current _ page / Total page number Operation Guide: Press [RED] to go to the previous page in the track / file list. Press [GREEN] to go to the next page in the track / file list. Press [BLUE[ to go to the previous page in the programmed list. Press [YELLOW] to go to the next page in the programmed list. • For MP3, WMA or JPEG files, use [A / V] to select a folder, then press [OK] first, and then use [A IV] to select a file, then press [OK]. • Press [CLEAR] to erase the last file of the program. • Use [A / V] to select "All Clear" at the bottom of the list to erase all the tracks / files in the program. • The programmed tracks/files is displayed in the right hand screen. • Use [_1 / I_] to go back / forward hierarchy of folders. EN between the 27 This function 1 In stop shuffles the playback mode, press order of tracks / files. [MODE] twice. You can adjust the picture quality. 1 During playback, until press [MODE] repeatedly appears. 2 Use [A/T] to select your desired item, then use [_1/I_] to adjust the setting. e.g.) DVD-video Black level You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. You can select "On" or "Off". e.g.) audio CD "On" : Track information : File information MP3 / WMA / JPEG "CD-DA" will be displayed. : Current Disc, SD Memory Card, or folder name will be displayed. Track / File list : Track / File list in the original will be displayed. : Press page Press page Guide _ Total playback _ Playback status 2 Press [I_ (play)] • Press [MODE] picture as recorded. Noise reduction (DVD-video % audio CD MP3/WMA/ JPEG To exit from :Makes the dark parts brighter. "Off" : Shows the original [RED] to go in the track [GREEN] to in the track Reduces the noise of the playback order picture as recorded. "1" :Executes 3D noise reduction which : Executes MPEG noise reduction the block noise and mosquito subtitle on movie. "3" 3 playback :Shows the original "2" time of all tracks. (audio CD only) the random picture. "Off" deletes the noise by comparing frames. to the previous / file list. go to the next / file list. to start random only) which reduces noise on the :Executes both MPEG noise reduction noise reduction. Press [RETURN] detects and each picture and 3D to exit. playback. mode: in stop mode. *eve_i _y mocI;_ H E_DM M nt (Ju_ 28 EN Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODEl whenever the scene contains the secondary video. Some BD-video and DVD-video been shot simultaneously contain change the camera angle when screen. 7 During playback, scenes which have from various angles. You can press _ appears on the TV [ANGLE]. • The selected angle will be displayed bar at the top of the TV screen. 2 Use [A IV] to select your desired on the display angle. video secondar video 1 During playback, press [MODE] repeatedly until the PIP function appears. 2 Use [A / V] to select the secondary video you want. • The secondary video will be displayed and the secondary audio will be output. • Use [_ql/1_-] to switch between current setting and "Off". 3 Press [RETURN] or [MODE] to remove the PiP information. EN 29 Title Search During playback, press [I_1 (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [1_1_1 (skip)] onceto go backto the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEGfiles, press [1_1_1 (skip)] to go back to the previous file. In stop mode, enter the title number you want to search using [the Number buttons]. Playback of the title will start in a few seconds. Chapter Search During playback of a title, enter the chapter number you want to search using [the Number buttons]. Playback of the chapter will start in a few seconds. Track / File Search Enter the track / file number [the Number buttons]. you want to search using Playback of the track / file will start in a few seconds. By using [SEARCH], you can select the following modes. search Dim Chapter / Title search _ Track search _ Timesearch ||| ___ 1 During playback, press [SEARCH] repeatedly until your desired search mode appears. 2 Enter the desired chapter, title, track, file number or timeto search for using [the Number buttons]. • Chapter, title, track or time search will start. • Press[CLEAR] to erase an incorrect input. 30 EN You can select the format of audio and video as you prefer depending Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during 7 2 playback. During playback, press [SUBTITLE]. Use [A / V] to select "Secondary Subtitle" "Primary on the contents 2 Subtitle", Style", back. When playing back video material recorded with 2 or more soundtracks (these are often in different audio languages or audio formats), you can switch them during playback. For BD, available audio varies depending on "BD Audio Mode" setting. Refer to page 32 for more information. 7 During or "Subtitle of the disc you are playing then playback, Use [A IV] audio press to select to set, then [AUDIO]. "Primary" or "Secondary" press [OK]. press [OK]. Primory Secondary ,, Secondary Subtitle "Primary "Secondary "Subtitle 3 2..G,tt Subtitle 2 ENG/11 Style 2 Subtitle" Sets the subtitle primary video. Subtitle" for the 3 Sets the subtitle for the secondary video. Style" Sets style of the subtitle. Use [A / V] to select your desired subtitle • Use [_1/1_] to switch between setting and "Off". Press [SUBTITLE] current Press [SUBTITLE] or : Sets the audio for the primary : Sets the audio for the secondary Use [A /V] channel. to select Press [AUDIO] your desired audio video. video. stream between to exit, 7 During playback, press [AUDIO]. to select your desired audio stream press [SUBTITLE]. FL_ e.g.) DVD-video • For audio CD, you can select following [] current subtitle to exit. 3 EN /3 subtitle to exit. • Use [_1/1_] to switch between setting and "Off". 3 Multi-ch "Secondary" 2 Use [A / V] to select your desired subtitle. I_l_[el D+ "Primary" 2 Use [A /V] channel. 7 During playback, Dolby • For"Secondary", use [_1/1_] to switch current audio setting and "Off". 4 style. 4 ENG 2/25 "Stereo" Both right and left channels (stereo). "l.-ch" Only left channel "R-ch" Only right channel Press [AUDIO] options. are active is active. is active. to exit. 31 There are 2 options for the"BD Audio Mode" setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD output changes between multi LPCM and Bitstream. 7 In stop mode 2 Use [A/T] with BD inserted, press [MODE]. to select your desired setting. hv_ II'l:_ II_[o]l"l_ ,.1111 "Mix Audio output": If it is available, BD-video's secondary and interactive audio will be output with the primary audio. • The secondary audio is the audio for the secondary video (Director's comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.). "HD Audio Output": Only the primary audio will be output. Set this mode in order to output, Dolby Digital Plus, Dolby TrueHD, or DTS-HD audio of BD through HDMI connection. 3 32 Press [RETURN] to exit. EN You can control the volume 5.1 ch speakers. To increase or decrease Press [VOL. level of the audio output from Select the sound effect mode for the audio output from 5.1ch speakers to suit your video or music. the volume level : 7 + / -]. • The volume level will increase or decrease, every time you press [VO/. +] or [VO/. -]. • The volume level will be displayed on the front panel display. off Turns offthe mode. Action Rock Enhanced low and highrange. Ideal for action movies and rock or pop music. Drama Jazz off To turn off the volume temporarily : Press [MUTE]. • To restore the volume, press [MUTE] again or press [VOL. +/-]. • "MUTE" will be displayed on the front panel display. I I_ M L I_1 During playback, press [SOUND MODE] repeatedly to select the desired sound effect mode. sound effect Clear mid and high-range. Ideal for drama movies and jazz music. @ Concert Classic @ e_ Sports Sports Neutral sound. Ideal for live concerts and classical music. Moderate mid-range and surround effects for clear vocals and the atmosphere venue. Select the surround speakers. mode for the audio output 7 During playback, press [SURROUND] select the desired surround mode. "Off": Turns off the surround "2.1 ch Stereo": Set the surround from 5.1ch repeatedly to mode. mode to "2.1 ch Stereo". (2.1 ch Stereo sound from front left/right "Multi of a live sport speakers.) ch Stereo": Set the surround mode to "Multi ch Stereo". (5.1 ch stereo sound from 5.1 ch speakers.) "Dolby Pro Logic II Movie": Set the surround mode to "Dolby Pro Logic II Movie". (Dolby Pro Logic II 5.1ch surround sound.) "Dolby Pro Logic II Music": Set the surround mode to "Dolby Pro Logic II Music". (Dolby Pro Logic II 5.1ch surround sound.) EN 33 You can change the active source mode to the desired external audio inputs and enjoy audio from the connected device with the multi-channel surround sound capabilities. I Press [SOURCE + / -]. • "Input Select" screen will appear. 2 Use [A Iv] The sleep timer enables the unit to switch to the standby mode automatically after the selected preset time. To set the sleep timer : Press [SLEEP[ repeatedly time. to select the desired preset "SLP OFF": to select the desired source mode, then Turns offthe press [OK]. sleep timer. "SLP 1S": "Disc / SD': Set the active source mode back to this unit. "Aux": Set the active source mode to the AUDIO IN(AUX) jacks. "Coaxial": Set the active source mode to the DIGITAL AUDIO IN (Coaxial) jack. "MP3 Line-in": Set the active source mode to the MP3 LINE-IN jack. "FM": Set the active source mode to the FM ANT 75_ jack. Set the _reset turn-off "SLP 30": time to 15 minutes. Set the _reset turn-off "SLP 60": time to 30 minutes. Set the _reset turn-off "SLP 90": time to 60 minutes. Set the _reset turn-off "SLP 120": time to 90 minutes. Set the _reset turn-off "SLP 1S0": time to 120 minutes. Set the time to 150 minutes. _reset turn-off To check or change the setting : Press [SLEEP] once to display the remaining time. To change the setting, press [SLEEP] repeatedly until your desired preset time is displayed. To cancel sleep timer : Press [SLEEP] repeatedly until "SLP OFF" is displayed. Simply connect your portable media player (e.g. MP3 player) to this unit to enjoy superior sound quality from your music collections. 34 1 Connect your portable media player to the MP3 LINE-IN jack on this unit. • Refer to "Connecting Portable Media Player" on page 16. 2 Turn on your portable 3 Press [SOURCE + / -]. • "Input Select" screen will appear. 4 Use [A /V] 5 Start play music on your portable media player. to select "MP3 Line-in", then press [OK]. media player. EN Guide to the FM Radio Screen By connecting the supplied FM wire antenna, you can listen to FM radio on this unit. I EN When you access radio mode for the first time, follow the instruction to store a radio station to your preset station list. You can store up to 40 FM radio stations in the memory. 7 Connect the supplied FM wire antenna ANT 75_2 jack on this unit. • Refer to "Connecting FM Radio Antenna" 2 to the FM on page 16. Press [SOURCE + / -]. • "Input Select" screen will appear. 3 Use [A IV] 4 Press [4 / I_]. to select "FM", then press [OK]. _ Current status • This unit will start tuning automatically until a radio station with sufficient signal strength is found. • If necessary, repeat press [4/1_] the desired radio station. • To fine-tunethe [A IV] 5 reception repeatedly Frequency Preset station Playback press reception is added to the preset station of current radio station Button guide for tuning again until you find ofa weakstation, until an optimal _ Current is found. list status page / Total page number Operation Press [OK]. • The radio station FM icon / Audio mode (Stereo or Mono mode) Guide : Press [RED] to go to the previous station in the preset station list. Press [GREEN] to go to the next station in the preset station list. Press [BLUE] to go to the previous page in the preset station list. list. Press [YELLOW] to go to the next page in the preset station list. 7 Follow steps 1] to 2) in "Presetting on page 35. 2 Radio Stations" Use [RED] / [GREEN] to select the desired station. preset • This unit will tune to the selected preset radio station. • To go to the previous / next page of the preset station list, press [BLUE] / [YELLOW]. 1 2 Follow steps 1) to 2) in "Presetting Radio Stations" on page 35. Use [RED] / [GREEN] / [BLUE] / [YELLOW] to select the desired 3 preset station. Press [CLEAR]. • The selected list. station is deleted from the preset station YON_ IthE XiXi_ii/!!iiii_iiii!!iiiD_ _lth_ iiiiii_!iiiiii!iii_iQiU_ii_ EN 35 In the setup menu screen, you can access various kinds of menus, and customize them as you prefer. To call up the setup menu screen, press [SETUP]. Then follow the instructions below to navigate through the screen. < Setup menu screen > Quick menu I_ Contains only the frequently Custom menu Contains all the available Initialize menu used menus. setup menus. Contains the menus that relates to the initialization the unit or the SD card. of Menu window Displays the available • • • • • Use [A IV] to move the highlight up and down. Press [OK] to access the options of an item, to switch settings, or to confirm Use [_1/1_] to switch settings in some menus. Press [RETURN] to go back to the previous screen. Press [SETUP] to exit. Items with (_) can be accessed from "Quick" The items highlighted Language the selection. menu also. in grey are the default setting. Audio Chinese Turkish English French Japanese Korean Greek Irish Spanish German Danish Finnish Portuguese Polish Italian Swedish Norwegian Icelandic Czech Slovak Dutch Russian Hungarian Romanian Bulgarian Other English French Japanese Korean Greek Irish Spanish German Danish Finnish Portuguese Polish Italian Swedish Norwegian Icelandic Czech Slovak Dutch Russian Hungarian Romanian Bulgarian Other French Korean Irish Spanish German Danish Finnish Portuguese Polish Italian Swedish Norwegian Icelandic Czech Slovak Dutch Russian Chinese Hungarian Romanian Turkish Bulgarian Other Subtitle Turkish Disc Menu 36 items for the selected menu. Greek Sets the audio language for BD-video or DVD-video playback. "Original": Activates the disc's original language. "Other": If you select "Other", enter 4-digitcode for the desired language (refer to page 49). Only the languages supported by the disc can be selected. Sets the subtitle language for BDvideo or DVD-video playback. "Other": If you select "Other", enter 4-digitcode for the desired language (refer to page 49). Only the languages supported by the disc can be selected. Sets the language "Other": for disc menu. If you select "Other", enter 4-digitcode for the desired language (refer to page 49). Only the languages supported by the disc can be selected. EN IUIC'I'IOI Language Auto (XXX) Player Menu* Fran(_ais Espaffol 5£YU/ Sets the language for player menu. (on-screen display menu) "Auto": Activates the Get & Set Menu Language function (refer to page 44). "Auto" is available only when "funLink(HDMI CEC)" is set to "On". Inside the parentheses next to "Auto" will be currently selected language. TV Aspect • Refer to page 42 for more information. 4:3 Pan & Scan 4:3 Letter Box Sets the aspect ratio of the playback image to fit your TV. 16:9 Squeeze HDMI Video Resolution • This feature 480p is available only when the display device is connected by an HDMI cable. HDMI Deep Color • This feature is available only when the display device is connected by an HDMI cable, and Sets the resolution of the video signal being output from the HDMI OUT jack. "Auto": HDMI video resolution will be selected automatically depending connected HDMI device. Off Reduces the posterization playback picture. "Auto": Outputs Output* 480p 720p 1080i Progressive effect of the Reduces the posterization effect by automatically outputting up to 36 bit color whenever the unit recognizes the connected display device supports Deep Color feature. "Off": when it supports Deep Color feature. Component on the Mode Video the standard 24 bit color, Sets resolution for component 3icture. output Sets the optimum progressive mode for the image material output from HDMI OUT jack and COMPONENT VIDEO OUT jacks. "Auto": The progressive mode will detect frame film material (movies) and 24- automatically select appropriate progressive mode. "Video": Suited for playing back video material discs (TV shows or animation), EN 37 IIIC'I'IOI Video Still Mode Field Frame 5£TU/ Adjusts picture still mode. "Auto": resolution and quality in Automatically selects the best resolution setting ("Frame" or "Field") based on the data characteristics of the pictures. "Field": Stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. Select "Field" when the pictures are still unstable even if "Auto" is selected. "Frame": Displays relatively motionless pictures in higher resolution. "Frame" improves the picture quality, although it may unstabilize the pictures due to alternate output of 2-field data. An individual picture on the TV screen is called "Frame", which consists of two separate images called "Field". Some pictures may be blurred at the auto setting in "Still Mode" setting due to their data characteristics. 38 EN 5£TU/ IIIC'I'IOI BD Audio Mode HD Audio Audio Output* • Refer to page 42 for more information. For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to "Setting the BD Audio Mode" on page 32. "Mix Audio Output": The audio for the secondary video and the interactive application will be output together with the audio for the primary video. "HD Audio Output": Outputs only the primary audio. Set this mode in order to output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI connection. Output "Speakers" Audio will be output 5.1ch speakers. "HDMI Normal" HDMI Normal HDMI LPCM from the The Multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM depending on the material. "HDMI LPCM" The Multi-channel or stereo audio signals are output jack with LPCM. Speaker Setup • This feature is available only when "Audio Output" is set to "Speakers". (Refer to page 42.) Surround Effects • Sets the surround effect of audio when the setting of surround mode is set from HDMI OUT Center Width 0-7 Dimension -3-3 Adjust the sound balance front and rear speakers. Panorama On "On": :: it i:s3 Adjust i center to "Dolby Pro Logic II Movie" or "Dolby Pro Logic II Music". (Refer to "Selecting Surround Mode" on the sound balance between and front speakers. between Sets the sound of center speaker have surround-sound effect. "Off": to Sets the sound of center normal. to speaker page 33.) Channel Level • Tests or sets the volume for each Test Tone "Off": Deactivates "Manual": Manual Auto speaker. the Test Tone. Allows you to manually speaker to test. "Auto": select the Automatically tests all speakers. • To stop the test tone, press [RETURN]. Sets thevolume ,eve, foreach Front Lch speaker to get ideal audio Center Subwoofer Front Rch Surround Rch Surround Lch Default -- iiiiiiiiiiiiiiiiiiii ........................................ +lOdB'd_ d i £i _tisl Sets the volume level of all speakers to the default EN balance. d !'ti!O -lOdB ,d_efa iii,i_!iii!i iti setting. 39 IUIC'I'IOI Audio Speaker Setup This feature is dValldLlle Only Delay Time This is a parameter w[]_[] lot "Audio Output" is set to "Speakers". (Refer to page 42.) OpLIIT|ILIfl 9 tfl_ timing at which the sound outputs from the speakers according to the distance from the listening 5£TU/ Distance Sets the unit of measure Front _u!'t s' Center i is3 Surround Feet : 0-15 Meters : 0 -4.5 position. for "Delay Time". Meters Setsthe distance from the listening point to each speaker to get the ideal delay time. If you change the setting of "Front", the setting of "Center" and "Surround" will be set to the same setting automatically. • If you set "Front" to 0 ft (0m), you can only select 0 ft (0m) for "Center" and "Surround". • Difference of the values among "Front" and "Center" cannot exceed 5 ft (I .5m). Default Sets the unit of measure delay time setting. DRC Password input field page 44 for more information. and all to the default Sets whether to compress the range of sound volume (dynamic range control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back. _)n !! Parental Refer to settings BD Rating Level Sets the rating playback. level for the BD Age Setting Sets the rating playback. level for the DVD 8 (Adult) DVD Rating Level to I [Kid Safe] Password Others Change Password Angle Icon for Sets whether to display the angle icon on the TV when playing back the scene with various angles. Sets the brightness panel display. "Auto": of the front Bright Front panel display during playback. "Bright": Front panel display "Dimmer": gets darker Front panel display gets darker, Dimmer CEC) is Sets the new password "Parental" setting. off Panel Display fun-Link(HDMI • This feature input field gets brighter. Sets whether to utilize the funLink(HDMI CEC) function, _n available only when the display device is connected with an HDMI cable, and when it supports Link(HDMI CEC) feature. fun- • Refer to page 44 for more information. Media Select _ Select the media to play back. SD Card Software Update • Refer to page 45 for more information. Current Version Indicates version. Disc Update Yes 40 the current software Allows you to update this unit's software using a disc. EN IIIC"I'IOI 5£TU/ Setup Resets all the settings, except for "Parental" to the factory default. Yes Format Card SD Erase Saved BD-ROM Data Re-formats SD card. Yes Yes • Refer to page 45 for more information. Re-formats local storage used for BD-Java. (Player) Re-formats local storage used for BD-Java. (SD card) (Player) Erase Saved BD-ROM Yes Data (SD Card) EN 41 5£TU/ IUNC'I'IOI [SETUP] "_ "Custom" "_ "Video" "_ "TV Aspect" ] Use this feature to adjust the aspect ratio of the video source which is different without distorting the picture. Descriptions of each setting are as follows: V[d_ _, _ _: _: 4:3 ti_:, , _: from your TV's ratio to fit your TV monitor _:i;i ti _ : 4:3 Letter Box To enjoy 16:9 picture on 4:3 monitor: 16:9 picture is scaled down until both sides of the picture fits the 4:3 TV. 4:3 Pan & Scan To enjoy 16:9 picture on 4:3 monitor: Both sides of the picture are trimmed the aspect ratio of the picture. 16:9 to fit the 4:3 TV without distorting 16:9 Wide To enjoy 16:9 picture on 16:9 monitor: Select this setting when you want to enjoy 16:9 picture on the 16:9 TV. 16:9 Squeeze To enjoy 4:3 picture on 16:9 monitor: Use this setting to display 4:3 picture the aspect ratio of the picture. 16:9 4:3 [SETUP] _ "Custom" ,,_ "Audio" ,,_ "Audio Output" Audio Source 4 Dolby Digital on the audio source and the setting Digital Dolby TrueHD 42 Plus of surround mode. HDMI OUT jack. Which audio format can be output depends on the compatibility connected device. of the Dolby Digital 'tDolby Digital or I or Multi LPCM tMulti LPCM Multi LPCM tMulti LPCM or I or or lot Mute I Mute Mute tMute DolbyDigitaIPlus t or Dolby distorting I If you set to "Speakers" : The audio output from the 5.1 ch speakers differs depending (Refer to "Selecting Surround Mode" on page 33.) If you set to "HDMI Normal" or "HDMI LPCM" : Refer to the table below for the audio output from on the 16:9 TV without I [ I I I I Dolby Digital tDolby Digital or I or .×. I _. I Multi LPCM 1 tMulti LPCM 1 Multi or I or Mute I Mute or Mute LPCM _1 I lot tMute I I DolbyTrueHD I I or I I Dolby Digital tDolby Digital or I or Multi LPCM.2 tMulti LPCM_2 Multi or I or Mute I Mute or Mute i .x. tMultiLPCM 1 [ LPCM _2 I tMulti LPCM 2 Ior tMute EN 5£TU/ IIIC'I'IOI Audio Source 4 DTS ® Which audio format connected device. DTS® '_DTS ® or I or Multi DTS - H D ® LPCM i Multi depends on the compatibility Multi I I i Multi LPCM LPCM or lot Mute I Mute I I Mute DTS-HD® or I DTS® I DTS ® Mute I I I I I i Multi LPCM _3 Ior or I or LPCM _3 Multi Mute Multi LPCM I Multi LPCM _3 I oi" I I Mute I Multi LPCM or I or or Mute I Mute Mute LPCM _3 or Mute Multi LPCM Multi IiMute Multi LPCM lot Mute i Dolby Digital DTS ® Dolby Digital, LPCM or Mute DTS ®, Multi LPCM or Mute Multi Multi LPCM 2ch LPCM or Mute 2ch LPCM or Mute DTS ® DTS ®, Multi LPCM or Mute Multi PCM 2ch LPCM or Mute 2ch LPCM or Mute MP3 2ch LPCM or Mute 2ch LPCM or Mute WMA 2ch LPCM or Mute 2ch LPCM or Mute Dolby Digital Dolby Digital or Multi LPCM LPCM or Mute LPCM or Mute LPCM or Mute Multi LPCM or Mute or Mute DTS ® ii or Multi DTS ® LPCM Multi Mute or Mute or Oiiii!i Iii!i!i!!ii01ii!iiiiiii!i!£=!ii!:!iiiiiiiiiiiiiiiii!!iii LPCM Analog audio • If you unplug the HDMI cable when "Audio Output" from 5.1 ch speakers. LPCM 2ch LPCM 2ch LPCM or O( Mute Mute 2ch LPCM 2ch LPCM or O( Mute Mute 2ch LPCM 2ch LPCM or O( Mute Mute • When playing back a BD-video which only contains the primary audio, the audio output "HD Audio Output" even if the "BD Audio Mode" is set to "Mix Audio Output". EN LPCM I or i ii!iiii11!!!!i i]!i ii of the or Multi or LPCM can be output is setto "HDMI Normal" or"HDMI will be the same case as the LPCM", the audio will be output 43 IIIC'I'IOI I [SETUP] "_ "Custom" "_ "Parental" Some BD-videos or DVD-videos ] 5£TU/ [SETUP] feature a parental lock "_ "Custom" "_ "Others" You can control all fun-Link(HDMI "_ "fun-Link(HDMI CEC)"] CEC) compatible level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc components connected via an HDMI cable by simple button operations of the remote control of this unit. In order to will play back. This feature prevents viewing inappropriate material. enable the function, to "On". ii/s your children _ H 1 Use [A IV] to select _j , then • Password input field appears. 2 If a password from has not been set, follow A). If a password has already been set, follow B). If you want to change the password, follow B) and C). When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel. If you forget the password, Buttons for one touch play: follow D). A) Enter 4 digit password using [the Number buttons]. • "4737" cannot be used. B) Enter 4 digit password. C) Select "Password Change", the new password. [1_ (play)], [1<1<1(skip)], [IH_I (skip)], [the Number buttons], ]DISPLAY], ]SETUP], or ]SOURCE + / -] then press [OK]. Enter Select the desired item to set the rating level for, then press [OK]. 4 CEC)" press [OK]. D) Enter "4737". Current password and "Parental" settings are now cleared. Enter a new password. 3 you need to set "fun-Link(HDMI Select the desired rating level, then press [OK]. [TOP MENU], or [POP MENU / MENU] inserted in the unit) ]when a disc is When you press and hold [STANDBY/ON d)] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit. When the connected fun-Link(HDMI CEC) compatible display device is turned off, this unit may also turn off together. <BD rating level> All Sets no limit. Age Setting Allows you to enter the age to limit, and prohibits the playback of a disc whose rating level exceeds the age setting entered here. • Enter the age as a 3-digit-number. (e.g., For age 15, enter [0], [1], [5].) <DVD rating level> All Parental control is inactive; played back. 8 ]Adult] DVD software of any grades ]adult/ general / children) can be played back. 7 [NC-17] No one under 6 JR] Restricted; under 17 requires accompanying parent or adult guardian. 5 [PGR] Parental Guidance 4 [PG-13] Unsuitable 3 [PG] Parental Guidance 2 [G] General audience. 1 [Kid Safe] Suitable for children. To Cancel Parental Get & Set Menu Language The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. • This feature is available only when "Auto ]XXX)" is selected in "Player Menu" in the setup menu. ]Refer to page 37.) all discs can be 17 admitted. When you set your TV to output the audio from the 5.1ch speakers through this unit, you can control the volume level or mute the audio using TV's remote control. (For more details, refer to the owner's manual of your TV.) Recommended. for children under 13. suggested. Lock Temporarily Some discs allow you to cancel the parental lock temporarily. With those discs, the message below will appear when you try to play them back. "Enter current password." Follow the instruction which appears on the TV screen to cancel the parental lock. 44 EN 5£TU/ IIIC'I'IOI Initialize the setting 7 In stop mode, press [SETUP]. 2 Use [A/V] to select _, then press [OK]. 3 Use [A/V] to select _%0,then press [OK]. 2 Use [A IV] to select _, 3 Use [A /V] to select a desired option, (Available only when an SD Memory Card is inserted.): Initializes the SD Memory Card. After confirmation message appears, use [A IV] to select "Yes", then press [OK]. "Erase Saved BD-ROM Data (Player)": Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, from this player. "Erase Saved BD-ROM Data (SD Card)": (Available only when an SD Memory Card is inserted.): Clears the supplemental data for the BD-ROM playback, such as subtitle data, from the SD Memory Card. 6 Press [OK] or [RETURN] to exit. by using disc. Prepare a software update disc: Please access www.maqnavox.com, and download the latest software to a blank disc by following the direction described on the site. Press [OK]. (For "Setup" 5 and "Format SD Card" only) message will appear. Select "Yes", Press [SETUP] to exit. the software. • Use a blank disc and download disc. one software • For more details on how to download please refer to the site. 2 Follow steps 1 to 4 in "Current 3 Use [A/V] Use [A/V] per a the software, Version" to select "Disc Update", • Confirmation 4 4 • Final confirmation then press [OK]. There are 2 types of software files for MRD410B: E1S12UD and E1S10UD. The file name for this unit is E1 $12UD. Make sure to download the correct file when updating then press "Setup": Resets the setup menu to the default. "Format SD Card": 5 Use [A / V] to select "Current Version", then press [OK]. the software then press [OK]. [OK]. 4 Use [A /V] to select "Software Update", then press [OK]. I Card. 1 In stop mode, press [SETUP]. You can confirm the current software version. You can update or SD Memory on page 45. then press [OK]. Ii i_ II I(_L message will appear. to select "Yes", then press [OK]. • Disc tray will open automatically. • Insert the software update disc created at step 1 and then press [OPEN/CLOSE_]. 5 After completing message loading disc, confirmation will appear. Use [_1 /I_] to select "Yes" and press [OK] to start updating. • It may take a while to complete 6 After the disc update finishes, the updating. this unit will restart and eject the disc automatically. iiCII the :utlir_q i"I. I liter EN 45 If the unit does not perform following checklist. properly No power when operated as instructed in this manual, check the unit, consulting - Check if the AC cord is properly connected. Unplug the AC cord once, and wait for 5-10 seconds No sound or picture No audio / video signal on the display device via HDMI cable -IV is turned and then the plug it in again. - Check if the connected - Check if the connections - Check output whether a video the connected -IV or other device supports HDCP. (This unit will not signal unless the other device supports HDCP.) - Check whether the output are made format on. securely and correctly. of this unit (HDMI FORMAT) matches supported input format of other connected If the unit is connected to the unauthorized audio / video signal may not be output. device. display device the with an HDMI cable, the Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV and this unit and then reconnect it to both the devices while they are powered on. Distorted picture Completely distorted picture or black/white picture with BD / DVD No sound or distorted sound No audio signal from the loudspeakers of the TV connected via an HDMI cable No audio from the speaker system No 5.1 -channel audio from the speaker system Ensure that your HDMI cable is certified. - Sometimes a small amount of picture distortion This is not a malfunction. may appear. - Connect this unit directly to the TV. If the audio / video cables are connected VCR, pictures may be distorted due to the copy right protection system. - Make sure the disc is compatible with this unit. - Adjustthe to a volume. - Check the settings in "Audio" menu. - Set "Audio Output" to "HDMI Normal" or"HDMI Ensure that the TV's speakers are turned LPCM" in the settings menu. on in the TV menu. Ensure that the TV speakers are not muted. Increase the volume level of the speaker system. - Set "Audio Output" to "Speakers" in the setup menu. - Make sure that audio is not muted. - Make sure you have selected the correct active source for external audio input. Does the disc contain 5.1-channel audio? The 5.1 -channel audio is not available when the disc does not contain it. - Set "Audio Output" to "Speakers" in the setup menu. - Make sure that the surround mode is not set to "2.1 ch Stereo". When listening to a stereo (2 channel) source, press [SURROUND] and select "Dolby Pro Logic II Music" or"Dolby Pro Logic II Movie" to upmix the stereo source to 5.1 channel surround. Picture freezes momentarily during playback Disc cannot be played back - Check center - Clean - Clean the disc for fingerprints to edge. the disc. the disc. / scratches and clean with a soft cloth wiping from Ensure the disc label is facing up. - Check if the disc is defective - Cancel the ratings control SD Memory read Card cannot be No return to start-up screen when disc is removed The unit does not respond to the remote control 46 disc. level. Insert a correct disc that can be played back on this unit. - The format of the card does not match that accepted by this unit or the card is not compatible. Reset this unit by turning it off, then on again. - Aim the remote control directly at infrared sensor window Reduce the distance to infrared sensor window. Replace the batteries Buttons do not work or the unit stops responding by trying another or change the control in the remote on the front panel. control. Re-insert the batteries with their polarities (+/- signs) as indicated. - To completely reset the unit, press and hold [STANDBY/ON _] on the front panel for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for 15-20 seconds. EN The unit does not respond to some operating commands - Operations may not be permitted by the disc. Refer to the instructions of the disc. during playback The unit cannot read BD / - Condensation? DVD/CD - You are attempting Angle does not switch page 18. - Wipe the dirt offthe disc or replace the disc. - The angle cannot be switched for BD / DVD which Playback does not start when the title is selected The password for rating has been forgotten Radio reception (Let sit 1 or 2 hours) to playback a disc other than one with one of the Logos on In some cases multiple angles are only recorded - Check the settings in "Parental" menu. level Enter the default is poor password between multiple angles. for specific scenes. "4737", then your forgotten If the signal is too weak, adjust the antenna better reception. Increase the distance do not contain I- I_1 password or connect an external will be cleared. antenna for this unit and your TV or VCR. - Tune in to the correct frequency. Place the antenna interference. Analog further Audio representation of sound. See also Just as a book is split up into several chapters, a title on a BD-video or DVD-video is usually divided into chapters. See also "Title". Component Aspect that may be causing the Chapter An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect "Digital Audio". away from any equipment Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high). Video Output Each signal of luminance (Y) and component (PB/CB, PR/CR) is independent to output so that you can experience picture Color as it is. Also, due to compatibility with progressive video 480p, you can experience higher-density picture than that in interlace 480i. BD-Java With some BD which support Java applications, you can enjoy the interactive functions such as games or interactive menus. Blu-ray Disc (BD) Blu-ray Disc is a next generation optical video disc which is capable of storing much more data than a conventional DVD is. The large capacity makes it possible to benefit from the features such as high-definition videos, multichannel surround sounds, interactive menus and so on. EN Digital Audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also "Sampling Frequency" and "Analog Audio". 47 / Dolby Digital Region Code The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo (2ch) or multichannel audio. Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of Dolby your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Digital Plus Dolby Digital Plus is the next generation digital audio compression technology developed as an extension to Dolby Digital. Blu-ray Disc supports surround sound output. Dolby Pro Logic 7.1 multi-channel II Sampling Frequency The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality. Dolby Pro Logic II technology processes any high quality stereo (two-channel) movie and music audio into five Title playback channels of full-bandwidth surround sound. A matrix surround decoding technology, Dolby Pro Logic II A collection of chapters also "Chapter". detects the directional cues that occur naturally in stereo content and uses these elements to create a five-channel Track surround Dolby sound playback experience. on BD-video or DVD-video. See Audio CD use tracks to divide up the content of a disc. The BD-video or DVD-video equivalent is called a chapter. See also "Chapter". TrueHD Dolby TrueHD is a Iossless coding technology developed for next generation optical discs. Blu-ray Disc supports 7.1 multi-channel surround sound output. Windows DTS ® (Digital technology developed by Microsoft. You can copy Windows MediaTMAudio files on BD-RE/-R, DVD-RW/-R, Theater System) DTS ®is a multi-channel surround sound system. By connecting to DTS decoder, you can enjoy movie dynamic and realistic sound like movie theater. DTS surround sound technologies DTS-HD were developed Windows Media Media TM TM Audio Audio is the audio compressing CD-RW/-R or SD Memory them back on this unit. Card from a computer and play by DTS, Inc. ® DTS-HD ®is a Iossless coding technology developed as an extension of the original DTS Coherent Acoustics format. Blu-ray Disc supports output. HDMI 7.1 multi-channel (High-Definition Multimedia surround sound Interface) A digital interface between audio and video source. It can transmit component video, audio, and control signal with one cable connection. JPEG (Joint Photographic JPEG is a method Experts of compressing Group) still picture files. You can copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card from a computer and play back the files in this unit. MP3 (MPEG audio layer 3) MP3 is a method of compressing files. You can copy MP3 files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card from the computer and play back the files on this unit. PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality that requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital, DTS, and MPEG audio to PCM. See also "Digital Audio". 48 EN French [FRE] 5264 Macedonian 5957 Siswat 6565 Abkhazian A-B 4748 Frisian 5271 Malagasy 5953 Slovak [SLO] 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 6561 6563 German [GER] 5051 5958 5966 Somali Albanian Malayalam Maltese Spanish [SPA] 5165 Amharic 4759 Greek [GRE] 5158 Maori 5955 Sundanese 6567 Arabic 4764 Greenlandic 5758 Marathi 5964 Swahili 6569 Armenian 5471 Guarani 5360 Moldavian 5961 Swedish Assamese 4765 5960 4771 5367 5447 Mongolian Aymara Gujarati Hausa Nauru 6047 Azerbaijani Bashkir 4772 4847 Hebrew 5569 Nepali Hindi 5455 Norwegian [NOR] Basque 5167 Hungarian [HUN] 5467 Bengali;Bangla Bhutani 4860 5072 Bihari 4854 Bislama 4855 Breton 4864 I-K Icelandic lICE] 5565 [SWE] 6568 T Tagalog 6658 6051 Tajik 6653 6061 Tamil 6647 Tatar 6666 Telugu Thai 6651 6654 O-R Occitan 6149 Oriya Oromo (Afan) 6164 6159 Tibetan 4861 6247 6265 Tigrinya 6655 Tonga 6661 Indonesian 5560 Interlingua 5547 Interlingue 5551 Panjabi Pashto;Pushto 4853 Inupiak 5557 Persian 5247 Tsonga Burmese 5971 Irish [IRI] 5347 Polish [POLl 6258 Turkish Byelorussian 4851 Italian [ITA] 5566 6266 Turkmen 6657 6669 5759 5647 5669 Twi Cambodian Japanese Javanese Portuguese [POR] Quechua 6367 Catalan 4947 Kannada 5760 6459 Chinese [CHI] 7254 Kashmiri 5765 RhaetoRomance Corsican 4961 Kazakh 5757 6461 Croatian 5464 Kinyarwanda 6469 Romanian [RUM] Czech [CZE] 4965 Danish [DAN] 5047 Kirghiz Kirundi 5771 6460 Dutch [DUT] 6058 Korean [KOR] 5761 Samoan 6559 English [ENG] 5160 Kurdish 5767 Esperanto Estonian 5161 5166 Sangho Sanskrit 6553 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555 Bulgarian [BULl C-E F-H [JPN] L-N Laothian 5861 Latin 5847 Faroese 5261 Latvian;Lettish 5868 Fiji 5256 Finnish [FIN] 5255 Lingala Lithuanian 5860 5866 EN Russian [RUS] 6467 S 6665 [TUR] 6664 U-Z Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk Welsh 6861 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yoruba 7161 Zulu 7267 / 49 _i:ll|:ll_ Signal system NTSC Color Power requirements 120 V AC, 60 Hz Power consumption 70 W (standby: 0.6 W) Home theater mode: 1000 W Total output power (Amplifier) FTC* output power : 700 W _(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within Dimensions (width x height x depth) Weight 2.5% THD) 17.2 x 2.4 x 11.7 inches (435 x 59 x 297 mm) Total weight: 27.56 Ibs. (12.50 kg) Main unit: 8.16 Ibs. (3.70 kg) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80 % (no condensation) SD card slot slotx 1 MP3 LINE-IN jack ............................. mini jack x 1 Analog audio output (SPEAKERS (4_2)) Front and rear speakers 500 mVp-p (75£2) System: Full range satellite Impedance: 4_2 Frequency response: 180 Hz ~ 20 kHz Dimensions: 3.9 x 5.1 x 4.0 inches (100 x 130 x 100.5 mm) Weight: front1.19 Ibs. (0.54 kg) rear - 1.13 Ibs.(0.51 kg) System: Full range satellite Impedance: 4_2 Frequency response: 180 Hz ~ 20 kHz Dimensions: 3.9 x 5.1 x 4.0 inches (100 x 130 x 100.5 mm) Weight: 1.61 Ibs. (0.73 kg) Impedance: 4_-_ Speaker drivers: 6.5 inches (160 mm) woofer Frequency response: 60 Hz ~ 150 Hz Dimensions: 5.9 x 12.2 x 12.1 inches (149.5 x 310.5 x 308 mm) Weight: 8.29 Ibs. (3.76 kg) 1 Vp-p (75_-_) Y: 1 Vp-p (75_-_) PB:700 mVp-p (75_-_) PR:700 mVp-p (75_-_) L/R:2 Vrms (47k_-_) 500 mVp-p (75_-_) Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio Tuning range: FM 87.5 - 108 MHz (lOOkHz) Antenna terminal: 75_-_(unbalanced) 5O EN Disc handling • Handle the discs so that fingerprints adhere to the surfaces of the discs. Servicing and dust do not • Please refer to relevant topics on "Troubleshooting" on page 46 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please contact 1-800-605-8610 or visit : www.magnavox.com/support • Always store the disc in its protective case when it is not used. • Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not attempt to playback such discs, as they may damage the unit. Cleaning • If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. the cabinet • Wipe the front panel and other exterior surfaces of the unit with a soft cloth. • Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. Cleaning IR signal check With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working. the disc lens • If this unit still does not perform properlyalthough you refer to the relevant sections and to "Troubleshooting" in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit. / EN 51 MAGNAVOX LIMITED FUNAI CORP. will repair this product, as follows: WARRANTY free of charge in the USA in the event of defect in materials or workmanship DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide original retail purchase. the labor without charge for a period of ninety (90) days from the date of LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCTTO UNDER THIS WARRANTY. This warranty shall not be extended OBTAIN SERVICE to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED THE PRODUCT MUST BE ACCOMPANIED SERVICE CENTER. SERVICE CENTER. BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVESTHE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS: To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED contact us at" SERVICE CENTER or for general service inquiries, please FUNAI SERVICE CORPORATION Tel: 1-800-605-8610 www.mag navox.com/su pport 2200 Spiegel Drive Groveport, OH 43125 lVMN29933 Printed ***** in China *lVMN29933_