Download Epson U590P - TM B/W Dot-matrix Printer Specifications

Confidential
DLE DC4 n m t (when n = 1)
[Name]
Generate pulse in real time
[Format]
ASCII
Hex
Decimal
[Range]
n=1
m = 0, 1
1≤t≤8
DLE
10
16
DC4
14
20
n
n
n
m
m
m
t
t
t
[Description] Outputs the pulse specified by t to connector pin m as follows:
m
Connector pin
0
Drawer kick-out connector pin 2.
1
Drawer kick-out connector pin 5.
The pulse ON time is [t × 100 ms] and the OFF time is [t × 100 ms].
[Details]
• When the printer is in an error status when this command is processed, this
command is ignored.
• If a pulse is output to the connector pin specified while ESC p or DLE DC4 is
executed, this command is ignored.
• The printer executes this command upon receiving it.
• With a serial interface model, this command is executed even when the printer is
offline or the receive buffer is full.
• With a parallel interface model, this command cannot be executed when the
printer is busy. This command is executed even when the printer is offline or
there is an error status when DIP switch 2-1 is on.
• This command is effective even when the printer is disabled with ESC = (Select
peripheral device).
[Notes]
• If print data includes this command string, the printer performs this command.
The user must consider this.
• This command should not be used within the data sequence of another
command that consists of 2 or more bytes.
[Reference] ESC p
TITLE
TM-U590 series
Specification
(STANDARD)
SHEET
REVISION
H
NO.
NEXT
82
SHEET
81