Download Craftsman 113.170330 Owner`s manual
Transcript
Save This Manual for Future Reference SEARS owner's manual MODEL NO. 113.170330 CRRFTSMRN® Serial Number Model and serial numbers may be found on the side of the detachable blower. You should record model and serial numbers place both in a safe for future use. 16 GALLON WET/DRY VAC WITH DETACHABLE BLOWER • assembly • operating • repair parts FOR YOU R SAFETY READ ALL INSTRUCTIONS CAREFULLY k= J Sears, Part No. SP6481 Roebuck ,J and Co., Hoffman Estates, IL. 60179 U.S.A. Printed in U.S.A. FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS If within one year from due to a defect If this Craftsman this warranty Warranty the date of purchase, in material or workmanship, Wet/Dry coverage Service Vac is used applies Is Available vice Center/department This warranty This warranty rights gives for commercial By Simply only while you specific Wet/Dry Vac fails or rental purposes, for only 90 days from Throughout applies this Craftsman Sears will repair it, free of charge. date of purchase. Contacting The United The Nearest Sears this product is in the United legal and you may also have which vary from state to state. Sears, Roebuck and Co., D/817 rights, Ser- States. WA, Hoffman States. Estates, other IL 60179 IMPORTANT SAFETY INSTRUCTIONS Safety is a combination sense, staying of common alert and knowing your vac works. Read understand the vac. gases, how this manual to or explosive dusts or other fuels, lighter fluid, based natural paints, coal dust, magnesium dust, grain • Do not use Wet/Dry means is not followed injured if the safety someone information Do not vacuum will be seriously or killed. injured CAUTION: tured someone informa- using basic safety your Wet/Dry precautions may be Vac, follow including To reduce expose WARNING.To reduce electric shock, and all labels on the Wet/Dry operating. to rain. Store or manual ter or without Use only as described vacuuming in this man- operation injury or when section before servicing. Sparks before unplugging. vapors or dust. To reduce flamthe risk • Do not vacuum, near, flammable or use this Wet/Dry or combustible or electric unattended. Vac liquids, 2 except for in the of this manual. Vac when from outlet when WARNING: of fire or explosion: Vac with a torn fil- as described Wet/Dry in. Unplug can ignite do not used by or the filter installed damage to Wet/Dry Vac, use only Sears Craftsman recommended accessories. inside the motor materials. shock, to be used as a toy. Close liquids Do not leave from toxic indoors. attention is necessary near children. Vac before ual. To reduce the risk of personal mable do not vacuum Do not use this Wet/Dry this owner's damage. hazards the risk of electric Do not allow injury: Read and understand soot or ash. This Do not use or store near hazardous the fol- or will not be cap- the risk of health vapors or dusts, materials. lowing. the risk of fire, fireplace or matches, by the filter and may cause To reduce injured. When dust, that is burning is a very fine dust which if the safety tion is not followed anything Do not vacuum or killed. means oil- Vac as a sprayer. smoking, such as cigarettes, hot ashes. WARNING: means if the safety information is not followed someone could be seriously cleaners, gas, hydrogen, or gun powder. Safety Signal Words DANGER: like gasoline Turn off Wet/Dry To reduce shock, the risk do not plugged not in use and Vac of fire run vac Toreduce theriskofinjuryfromacciden- Vacsbefore servicing. talstarting, unplug powercordbefore UsethisWet/dry Detachable Blower Vac asdescribed inthismanual. changing orcleaning filter. Whenusingasdetached blower: Donotunplug bypulling oncord.To unplug, grasptheplug,notthecord. •Turnunitoffbefore setting onground or Donotusewithdamaged cord,plugor releasing grasp fromhandle. otherparts.IfyourWet/Dry Vacisnot •Donotuseonwetsurfaces, electric working asitshould, hasmissing parts, shockcouldoccur. hasbeendropped, damaged, leftoutonlyatworkarea. doors, ordropped intowater,returnittoa •Directairdischarge •Donotdirectairatbystanders. SearsService Center. awaywhenblowing. Donotpullorcarrybycord,usecordas •Keepchildren handle, closea dooroncord,orpullcord •Donotuseblower foranyjobexcept around sharpedgesorcorners. Donot blowing dirtanddebris. runWet/Dry Vacovercord.Keepcord Observe thefollowing warnings that awayfromheated surfaces. appear onthemotorhousing ofyourWet/ Donothandle plugortheWet/Dry Vac DryVac. withwethands. Donotputanyobjectintoventilation GROUNDING NOT REQUIRED OUBLE INSULATED openings. Donotvacuum withanyventi- -_ WHEN SERVICING USE ONLY lationopenings blocked; keepfreeofdust, IDENTICAL REPLACEMENT PARTS lint,hairoranything thatmayreduce air flow. WARNING: To reduce the risk of Keephair,looseclothing, fingers, andall electric shock- do not expose to partsofbodyawayfromopenings and rain-store indoors. moving parts. Toreduce theriskoffalls,useextracare WARNING: For your own safety, read and understand owner's manwhencleaning onstairs. ual. Do not pick up hot ashes, coals, ThisWet/Dry Vacisdouble-insulated, toxic, flammable or other hazardeliminating theneedforaseparate ous materials. Do not use around grounding system. Useonlyidentical replacement parts.Readtheinstructions explosive liquids or vapors. forServicing Double-Insulated Wet/Dry SAVE THESE INSTRUCTIONS The operation of any utility vac or blower can result in foreign objects being blown For dusty operations, wear dust mask. Use only extension cords that are rated into the eyes, which can result in severe eye damage. Always wear safety goggles for outdoor use. Extension cords in poor condition or that are too small in wire size complying package) can pose fire and shock with ANSI Z87.1 (shown on before commencing operation. Safety Goggles retail stores. are available at Sears using an extension good condition. will cause WEAR YOUR Using any extension some loss of power. cord To keep cord. Extension To reduce the risk of hearing damage, wear ear protectors when using the vac hours or when, When the loss to a minimum, use the following table to choose the minimum wire size extension for extended noisy area. hazards. cord, be sure it is in using it in a Cord Length 0-50 Ft. 50-100 Ft. Gauge (A.W.G.) 14 12 Introduction This Wet/Dry Vac is intended hold use only. IMPORTANT Please Table of Contents for house- Item Page Warranty Information ............................. 2 Safety instructions ................................. 2 Introduction ............................................ 4 NOTE Read Carefully Static Shocks Are Common - In dry areas or when the relative humidity of the air is low. To reduce the frequency of static shocks in your home the best remedy is to add moisture to the air with a console humidifier. Unpacking Remove of carton. the Carton Some units may include shown. Notify Carton 5 9 13 Repair 16 Parts ........................................ Check Contents accessories B List. C not your Sears Store immedi- ately if any parts are damaged Key Contents Description 4 Assembly ............................................... Operation ............................................... Maintenance ........................................ and Checking Carton Contents m entire contents each item against Unpacking and Checking Carton Contents ............................. or missing. List ............................ Qty. A B 16 Gallon Wet/Dry Vac ............... Hose .......................................... 1 1 C D Blower Adapter .......................... Diffuser ....................................... 1 1 E Blower ............................ 1 F G H Utility Nozzle .............................. Wet Nozzle ................................. Car Nozzle ................................. 1 1 1 J Extension ....................... 2 K L Crevice Tool ............................... 14" Floor Brush .......................... 1 1 M Float ........................................... 1 N Filter Cage P R S T Single Wheel Caster .................. Wheel Assembly ........................ Filter Plate .................................. Filter Nut .................................... 2 2 1 1 U V W Accessory Caddy ....................... Filter (Red Stripe) ....................... Owners Manual .......................... 1 2 1 Nozzle Wands ................................. F 1 N sQ Accessory 1. Unlatch Caddy Assembly the drum latches on the front and rear of unit. The drum the lid onto the drum. latches drum. Place the lid upside clean smooth surface. 2. Flip the drum upside down down 3. Take the accessory on a Orain Cap and position The open horseshoe shaped caddy positioned under the open Dove Tail on the floor. caddy it on the vac drum. 4. Slide the caddy Accessory Caddy hold Lift the lid off the end of should be the drain cap. down onto the drum, end of the caddy dovetail slides molded area of the drum. has two that will press into the The caddy will press onto the drum until it rests against the first step of the drum. bottom edge of the caddy The will be even with the bottom edge of the vac drum. it is not even with the bottom of the If drum, tap the edge until it is flush with the drum bottom. The tab lock located at the rear of the caddy will latch into the recessed area at the rear of the vac drum. To Install the Wheels/Casters 1. Locate the two 5-1/4" and the single 2. Insert wheel assemblies wheel the single casters. wheel bottom of the accessory shown (2 places). 3. Push on the caster casters caddy into the as until the end of the caster stem is inserted all the way into the socket. You will be able to hear the end of the caster snap into the socket the caddy. when positioning 4. Position sory caddy section assemblies assembly. of easily Repeat of one of into the acces- as illustrated. of the assembly let if necessary. wheel will rotate is correct. the dovetail the wheel support The caster Tap the wheel with a soft malfor the second 5. Flip the drum/caddy with the wheels the floor. assembly of the caddy upright resting NOTE: When emptying wet/dry drum, it is not necessary debris remove the vac caddy. on from the to Float/Cage Assembly WARNING: For your own safety, never connect plug to power source outlet until all assembly complete understood the safety instructions. 1. Remove vac with or missing. the detachable head assembly down on the power blower from the by pressing head latch beneath the carry handle of the detachable blower. Set the detachable blower the side. drum. 2. Locate /Blower are and and operation Do not operate any parts damaged power steps and you have read Detachable Place lid upside down off to ! on Drum / the float and filter cage. (The float is inside the loose parts Power Latch bag.) 3. Place the float over the center opening in the lid with the words "This side towards lid" laying hole. (See personal face down __'_'_ To reduce injury sure to keep K ''I" other foreign ter opening float. the risk or damage hands, out of _11_ to vac be fingers, objects when of the cen- assembling with the slots in the center Push __._.._ the ring of the lid on the filter cage until the tabs snap into the slots for a secure fit. NOTE: If filter cage needs to be removed, because the float is placed in the wrong way, use a flat blade screwdriver and insert the blade near one of the tabs between the filter cage and the center ring of the lid. Pry the tab out of the slot. Tilt the cage and lift away from replace, follow instructions. float/cage the lid. To assembly _ _._ _..___f I_ or any 4. Line up the filter cage tabs as shown assembly. Filter over the illustration.) WARNING: Lid Asm. Head Latch Slots (3) Cage Tabs Open Float (3) End Filter Assembly 1. Carefully cage, _ slide the filter over the filter sliding it over the center ring cov- __-'- ering the 3 slots until the filter stops against 2. Place Filter Nut Filter Plate the lid. the hole in the filter plate over threaded 3. Gently screw Filter of the filter cage. push on the filter plate to seat the rubber cular channel tighten NOTE: of the filter plate. it down. Finger screw and tighten only. Lever of filter nut should be away plate as shown. IMPORTANT: may deform Red Stripe ring of the filter inside the cir- 4. Place filter nut onto threaded from _"'-" Do not overtighten or crack as this the filter plate, filter Threaded_,_ I Screw _.-_ Lid _r_ \ _r''_ Filter Caoe cage or the filter. NOTE: Your filter has a red stripe matches an in-store visit your local Sears displayer. that When you store, just remember the color of your stripe for the correct filter. size Vac Assembly 1. Locate caddy the lid assembly assemblies Latch and the drum/ (assembled earlier). 2. Position the lid assembly with the inlet of the unit located in line with the drain cap and the drum label on the vac. Allow the assembly drum. 3. Rotate to rest on the vac both latches the latches drum. down until you hear snap over the lip of the NOTE: For best appearance of the unit, the inlet of the vac should be located above the drain. Cord Storage Simply wrap the power assembly and snap plug to a wrap cord around the connector of the cord. the lid on the Latch Positioning Detachable Blower (Power Head Assembly) 1. Locate the detachable Craftsman wet/dry blower 2. On top of the blower (opposite dle side of the blower); plastic Molded Plastic Lead of your vac. there the hanis molded lead that is used to assist assembling the unit. Position into the indented area above the lead the label. ndented Area 3. Rotate the detachable blower down until the travel of the unit stops. 4. Lightly press down of the detachable on the carry blower / fq c handle until the power head latch engages the blower. The detachable blower is now latched to the lid assembly. Release Button Your new wet/dry With the wet/dry vac is ready for use. vac completely assem- bled and ready for use, insert the push button end of the hose assembly of the vac. The hose should into the inlet snap into place. To remove the hose from the vac press the release button assembly inlet. in the hose and pull the hose out of the vac _ Pull Press and Operation V V/'_ r_ I_l I I_l v_._ To reduce the risk flammable gases paints, gun gasoline, powder of fire or explosion, or flammable alcohol vapors or explosive in the air. Do not vacuum ble liquids or hot ashes. hazards reduce Unplug drum. the risk of electrical power cord before CAUTION: from vapors To reduce ing damage wear or dusts, this vac in areas such as lighter fluid, dust such as coal, explosive Do not use this health do not operate vac do not dust, the risk of hear- ear protectors 2. When using fine dust, being blown into the can result in severe eye damage. Always wear safety goggles complying with ANSI Z87.1 (shown on Package) before commencing operation. Safety Goggles are available at Sears retail stores. level of this unit is too loud, Noise the risk of electric has a polarized is wider than the other). a polarized shock, outlet only one way. If the plug fied electrician Do not change NOTE: uming this This plug will fit in reverse plug. if it still does not fit, contact When mode, in the exhaust to install always Vacuuming the the proper outlet. the unit in the vacuinsert the air diffuser port on the detachable blower. This breaks air and diffuses it. up the direct flow of Dry Materials damage to vac. A dry filter is necessary to pick up dry material. If you use your vac to pick up dust when the filter is wet, the filter will clog quickly and be very difficult to clean. 3. If your filter is wet but you need to use the vac to pick up dry material, quickly without you can dry the filter by running the vac hose attached for about 10 min- ter job stopping air rushing through the the very fine particles than the 9-17816 99.99% micron. filter. This filter will stop of all particles Vacuuming 1. When as small as one Liquids picking up small amounts of liq- uid the filter may be left in place. 2. When picking up large amounts of liquid we recommend that the filter be removed. If the filter is not removed, will become appear 1. The filter must be in correct position at all times to reduce the risk of leaks and possible intervals to maintain a quali- the plug in any way. using NOTE: frequent The optional Craftsman Fine Particle Filter, stock number 9-17916 will do a bet- plug (one blade does not fit fully in the outlet, more for you to and clean the filter at vac will help dry the filter. and Hand Tool Catalog. appliance the drum utes. The clean Muffler; accessory number 9-16991 found in Sears retail stores or the Sears Power To reduce of your vac to pick up very peak vac performance. the Craftsman risk To it will be necessary noisy area. The operation of any utility vac or blower can result in for- purchase or shock do not expose to rain. Store vac indoors. changing or cleaning filter or emptying the dust empty If the noise the materials. when using the vac or blower for extended hours or when using it in a eign objects eyes, which grain or combusti- To reduce toxic with oil-base magnesium, flammable as a sprayer. vacuum cleaners, saturated and misting it may in the exhaust. 3. After using the vac to pick up liquids, the filter must be dried to reduce the risk of possible the filter. mildew and damage to Operation (continued) 4. When the liquid in the drum reaches a predetermined level, the float mechanism will rise automatically to cut off airflow. When this happens, turn off the vac, unplug the power cord, and empty the drum. You will know that the float has risen because vac airflow ceases and the motor noise will become in pitch, due to increased motor IMPORTANT: To reduce age to the vac higher speed. the risk of dam- do not run motor with float in raised position. Emptying Dust Drum WARNING: To reduce the risk of injury from accidental starting, unplug power the drum. 1. To remove cord before the lid to empty emptying contents of Latch the dust drum, simply lift the two drum latches at the front and rear of the dust drum and lift the lid assembly up and off the dust drum and set to the side. NOTE: Do not pick up the lid assembly by lifting on the handle to the detach- able blower. Lift the lid assembly by the latches. This will ensure that the detachable separate blower during 4. If the contents are liquid, you may dispose by using the drain provided in the drum for easy emptying. Simply unscrew the drain cap and allow the liquid to drain completely out of the vac drum. and the lid will not removal of the lid assembly. 2. Lay the lid assembly clean dry area while or changing 3. Dump waste upside emptying down on a the drum the filter. the drum contents disposal container. WARNING: To reduce the risk of back injury or falls, do not lift a vac heavy with liquid or debris. Scoop or drain enough contents out to make the vac light enough to lift comfortably. into the proper 10 To Store Your Accessories Your Craftsman accessory pockets caddy wet/dry storage. located and two vac There at the storage caddy is are five storage rear areas of the vac at the front of the storage caddy. Conveniently store designed to provide better stability and accessory nozzles and extension wands I_ on the rear of the caddy and use the front storage for hose storage and/or male to male and air diffuser storage. Cord Wrap When vacuuming is complete, cord and wrap it around unplug the Cord Wrap Area the lid assembly in the area provided between the raised letter area marked the inlet and "Cord Wrap". 11 Operation (continued) Moving Should the Vac it become necessary to pick the die vac up to move it, the handles may be used on the sides of the dust drum. Do not use the handle able blower located on the detach- to pick up the entire wet/dry vac or the lid assembly. Handle Blowing Your Feature wet/dry blower". vac features a "detachable It has the capability a dedicated blower WARNING: Always gles complying using WARNING: blowing inhaled. to be used as for yard cleanup and workshop blow sawdust and other when _ work, applications debris. wear safety with ANSI injury to bystanders, keep them I WARNING: To reduce clear of blowing debris.the risk of patio to 1. Familiarize blower gog- 2. Remove Z87.1 creates a dust mask dust which the detachable if might be This latch holds blower to the lid assembly. the handle CAUTION: To reduce the risk of hear- away ing damage wear ear protectors when using the vac/blower for extended hours or when using it in a noisy area. the Detachable This may be assembled 1. Insert of your the detachable blower upward up by raising and pulling from the nested position the unit of the hinges. Blower for "Blowing" two ways. the small end of one of the exten- Blowing ~ sion wands detachable vac. blower blower. 3. Lift the detachable Assemble with the detachable of your wet/dry vac by pressing down on the latch under the handle of the detachable as a blower. Wear yourself portion into the blowing port of the blower, insert the blowing _ Port Extension \ adapter into the extension wand and install the blower nozzle onto the blow- Wand ing adapter. -OR2. Insert the blowing blowing Connect adapter into the port of the detachable Blowin( Adapter blower. Blower Nozzle the large end of the extension 3. Turn the blower "ON" by toggling switch in the handle of the blower wand to the blowing adapter. Connect the blower nozzle to the extension wand. "ON" 12 position. the to the The wet/dry blowing vac using may the plied with the wet/dry install the blower also seven be foot used hose for inside of the push button end of the vac hose. Assemble the hose to the blower sup- vac. adapter adapter port of the wet/dry vac. The blower adapter will in the blowing insert into and connect the opposite the blower nozzle to end of the hose. The unit is ready for blowing applications. the Blower Nozzle Blowing Port Blower Adapter Blower Nozzle Maintenance Blower Intake WARNING: To reduce the risk injury from accidental starting, unplug power or cleaning After cord before of I changing filter. using the detachable blower I of your wet/dry vac, examine the bottom of the blower for dust and debris. Check to see if the intake to the blower to the plastic vents has debris and foam stuck '_ pad. To clean the foam pad under the shield of the detachable blower: intake 1. Remove the three intake shield. the 2. Lift the intake 3. Lift the foam detached shield blower, Holder Foam _ from the the foam pad from and set the foam the foam foam Reinstall foam the holder. need to replace part section 7. Reinstall pad for reuse. it, check Screws (3) 6. Replace foam pad holder on blower with the tabs away from the blower. pad holder foam pad to dry. 5. Examine Shield 4"= to the side. Clean the foam pad in warm soapy water or brush debris away. Allow Pad Intake _ pad holder from the blower. the foam pad holder holding Pad off and set aside. pad away will also lift away 4. Remove screws Foam If you intake pad under shield The unit is ready for use. the service of this manual. 13 the tabs of and 3 screws. Maintenance Cleaning Dry Vac Filter Your filter should maintain (continued) be cleaned often to picking storing top of the lid while filter with holes or tears in it. Even open a small of high quality when removing the filter to clean carefully or installing through the filter for cleaning remove the IMPORTANT: To reduce vac for dry material filter is removed, under "Wet Filter". run water through It is there the drum sfu pressure Take care from the hose is not through 10 minutes. The clean air the filter will dry it. Installation the Refer to "Filter Assembly". Allow the filter to dry before and storing the vac. the filter to shut off airof reinstalling quds. Vac 3. Wipe out with dry cloth. To keep your Wet/Dry Vac looking its best, clean the outside with a cloth dampened with warm water To clean After rushing pickup. Do not remove or float. Wet/Dry Filter approximately the risk of dam- age to the blower wheel and motor, always reinstall the filter before using CAUTION: be done quarters. strong enough to damage filter. Remember: To dry a filter quickly, reinstall the filter on the vac and allow the unit to run for filter plate and lift off filter. f ow when it as described Wet that water or filter nut from on the filter cage, remove cage SHOULD the filter from a hose or spigot. replacement, screw Cleaning and not in the living of the filter. Removal To remove off. 4. For thorough cleaning of dry filter with fine dust (no debris), you may run water it. Creases in the filter pleats may occur from installation but creases will not affect the performance the vac is turned against the inside wall of your dust drum and the debris will loosen and fall. paper designed to stop very small particles of dust. The filter can be used for wet or dry pick up. Handle the filter your hand on 3. After filter removal from vac, remove the dry debris by gently tapping the filter it immediately. is made area. outdoors hole can cause a lot of dust to come out of This filter removing 2. For best results of cleaning due to accumulated dust, clean the filter in an IMPORTANT: After cleaning, check the filter for tears or small holes. Do not use a NOTE: of dry debris can be without from the vac by slapping or up dry debris. your vac. Replace removal accomplished peak vac performance. Be sure to dry the filter before Filter 1. Some WARNING: To assure product SAFETY and RELIABILITY, repairs and adjustment should be performed by Sears Service Centers, always using Sears replacement parts. and mild soap. the drum: 1. Dump debris 2. Wash drum out. thoroughly. 14 Wet Nozzle farthest To pick up liquids use the 2-1/2" off a smooth wet nozzle plied with your wet!dry surface, accessory a second extension may be picked nozzle across will dry the surface Replacement nozzle Parts. to the be flipped thumbs _, , - lower opening holding removable the latches the - = - * = • .q the nozzle of the nozzle with closest on the far side and the latches of the insert, flip the nozzle over so are on the top and the round inlet opening is facing away from you. Make sure the squeegee for the squeegee through _n to you. With fingers The squeegee becomes m both hands, the round up by dragging may be obtained If the rubber you.) , body onto the insert and squeegee as you vacuum. rubber from , 2. Using to the wand the surface. . sup- first, and connect the 2-112" x 7' hose to the extension wand. Liquids . i ...... vac. To use this nozzle, simply attach the nozzle end of an extension wand. Connect rl stays on the insert pins. Sears worn, it may over for use on the opposite side or replaced. part #822256). (Replacement To reverse service or replace the squeegee: 1. Lay the wet nozzle the round on a fiat surface inlet opening facing with up and 3. Press the two latches close to you as shown. Latches /.__ Nozzle down with each thumb latching removable 2. Using both hands, on the removable latches) position insert, tabs into their original and two fingers 4. inspect each thumb (below squeegee of each hand NOTE: body. 3. Gently pull the latches to remove the insert. To reinstall follow these 1. Place the removable toward the removable and the latches close assembly and gently twist hold with both hands in opposite directions. snap into proper Twist Forward insert on a flat surupward to you as shown. Place the rubber insert, with the pins fitting squeegee on the through holes in the squeegee. sure the new working If the pins are out position, the nozzle position. Twist Backward insert correctly, steps: slots body. The insert pins should face with the pins positioned matching yourself the holes of the and fit into the matching in the nozzle on each latch, lift and disengage the two latches from the tabs on the nozzle over the locking position. the pins of the insert to make sure they fit through the the insert snap into the nozzle body. Snap the latches ody below tabs until you see and hear the edge the (Make The wet is located pickup 15 nozzle use. assembly is ready for wet J Repair Parts 16 Gallon Wet/Dry Vac With Detachable Model Number 113.170330 Always order by Part Number Blower - Not by Key Number WARNING SERVICING In a double-insulated instead of grounding. appliance, should a means Vac requires be done for grounding extreme only by qualified double-insulated double-insulated Wet/Dry Wet/Dry and the symbol ance. r_-I(square Key No. WET/DRY Part No. care be added. personnel. a double-insu- of the system, Replacement and parts for a Vac must be identical to the parts they replace. Your Vac is marked with the words "DOUBLE INSULATED" within a square) 509238 9-17816 1Filter (Red Stripe) Plate Cage may also be marked Key No. Description 1 21 22 23 24 25 26 Filter/Float Part No. 816345-1 15534-1 818413 818961 822459-1 826404 3 9-16937 1Filter 4 9-16938 5 826286-1 1 Filter Nut Drum 6 73185 7 822479 8 826285 9 73102 Accessory Caster 10 826387 Drum 11 826386 Lid 12 822442-1 Gasket Lid 13 826388 Power Head 14 820563-7 32 826355 15 826383 intake Shield 33 826354 16 826411 Foam Pad 34 822256 17 826389 Foam Pad Holder -- SP6481 18 822467-10 19 826382 Cord w/Plug Detachable Lid 20 823871 Rocker Drain Cap Wheel on the appli- Description Nut-Hex Washer Flange Blower 27 28 29 3O 31 Caddy Motor Blowing Blower Adapter Motor Cover 815096 826356-1 Key thru 24) 822482 Latch Diffuser Hose Adapter tHose 2 1/2" x 7' (Includes * Screw Pan Hd. Ty AB #10 x 3/4 Gasket (includes 822480 826385 1/4-20 Wheel Spacer Collector Nos.21, Latch 1 Stock Item - May be secured stores. Hardware Servicing and knowledge service 2 * Standard VAC Wet/Dry Vac, two systems of insulation are provided No grounding means is provided on a double-insulated nor should lated Wet/Dry OF DOUBLE-INSULATED Key Nos. 30 thru 33) Spring Tab Hose End Interlock Squeegee Owners Manual (Not illustrated) Switch through the hardware Item - May be purchased 16 locally department of most Sears retail Repair Parts 32 34 17 £RAFTSMAN® Accessories and Attachments Get more versatility from your Craftsman wet/dry vacuum by adding these accessories. Additional wet/dry vac accessories may be purchased at your local Sears retail store or Sears/Craftsman Power and Hand Tool Catalog. @ 17820 2-1/2"x7' Hose 16964 Extension Wands 16922 Utility Nozzle 17817 Wet Nozzle 16978 Car Nozzle 16915 Multipurpose Floor Tool 16947, 16948 Inflator Nozzle NOTE: Most Accessories 16933 Blower Nozzle 16926 14" Floor Brush 17816 Paper Pleated Filter 16991 Noise Muffler 16925 Dry Nozzle 16902 Crevice Tool 16901 Dusting Brush 17916 High Efficiency Filter Are Available In 2-1/2 Inch And 1-1/4 Inch Sizes 18 16934 Hose Grip 16917 Hose Connector 16930 Hose Lock 16935 Gutter Nozzle Sawdust Collection Series Whole-shop Sawdust Manifold-Type Collection System 29964 Radial Arm Saw Dust Collection Kit 29963 Table Saw Dust Collection Kit 29962 19 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME Para pedir servicio (1-800-469-4663) de reparacion a domicilio- For the repair or replacement 1-800-676-5811 parts you need: Call 6 am - 11 pm CST, 7 days a week PartsDirect 1-800-366-PART Para ordenar (1-800-366-7278) piezas con entrega For the location a domicilio - 1-800-659-7084 of a Sears Parts and Repair Center in your area: Call 24 hours a day, 7 days a week 1-800-488-1222 For information on purchasing a Sears Maintenance or to inquire about an existing Call 9 am - 5 pm, Monday Agreement Agreement: - Saturday 1-800-827-6655 SEARS HomeCentral SM The model and serial numbers will be found on the handle. When requesting service or ordering following information: • • Product Type Part Number • • parts, always provide the Model Number Part Description © 2002 Emerson Sears, Roebuck and Co., Hoffman Estates, IL. 60179 U.S.A. Part No. SP6481 Form No. SP6481 Printed in U.S.A. 5/02