Download Diamondback 1180 Er Owner`s manual

Please refer to www.diamondbackfitness.com for instructions in French.
Svp référez-vous www.diamondbackfitness.com pour instructions en français.
Diamondback Fitness, Inc.
300 Camarillo Ranch Road
Camarillo, CA 93012
T 800-776-7642
F 805-388-5890
Part no. 22-80-901
1180 Er Owner’s Manual
Purchaser’s Reference Information
IT IS IMPERATIVE THAT YOU FILL IN THE FOLLOWING INFORMATION AND
REFER TO IT SHOULD THE NEED FOR SERVICE ARISE.
Product Name:
Diamondback 1180Er Elliptical
Serial Number:
R__________
To Activate Warranty:
SERIAL NUMBER
R0509450001
IIII III IIIII IIIIII
WARNING REMOVING OR ALTERATION
OF THIS LABEL VOIDS WARRANTY
REGISTER YOUR WARRANTY AT
www.diamondbackfitness.com
OR COMPLETELY FILL OUT THE ATTACHED WARRANTY CARD (SEE
BACK COVER) AND RETURN TO DIAMONDACK WITHIN 15 DAYS
OF THE DATE OF PURCHASE. FAILURE TO COMPLY WITH THE WARRANTY ACTIVATION PROCEDURE MAY VOID THE MANUFACTURER’S
WARRANTY.
Dealer Name:
Serial No. Sticker
Dealer Address:
Dealer Telephone Number: (
)
Table of Contents
Purchaser’s Reference Information
Introduction
Safety Instructions and Warnings
Assembly Drawing
Assembly Instructions
BodyFit Ellipse Angle Adjustment
Workout Guidelines
Maximum Heart Rate & Training Zone
Quantity & Quality
Heart Rate Monitoring Devices
Pulse hand grips
Chest strap
Console
Glossary of Terms
Default Values
Operating Tips
Console Layout
Displays
Function Keys
Workout Programs
Quick Start
Manual
Random
Sprint
Interval
Total Trainer
Target HR
HR Interval
Cardio
User 1 & User 2
Maintenance
Domestic Warranty Information
Warranty Card
2
4
5
6
7
9
10
15
18
22
40
41
43
Dealer Contact Name:
Date Purchased:
Shipping Materials:
Diamondback recommends that you retain the original packing materials
(box and packing items) for future shipping needs.
2
1180 Er Owner’s Manual
1180 Er Owner’s Manual
3
Introduction
Congratulations on your 1180Er elliptical trainer. You made a very smart
choice. You are about to experience one of the most effective and technically
advanced methods of low-impact, cardiovascular exercise available today.
Your patented 1180Er elliptical trainer was created by Diamondback Fitness,
the innovative value leaders in fitness and bicycle equipment for nearly three
decades.
Your 1180Er has every possible feature to make your workout extremely efficient, productive and comfortable. Because of our bodyfit ellipse angle position adjustments, longer 21” stride and hinged foot pedals, no elliptical will
give you a more natural feeling walking step. Your console offers 4 displaywindows with easy to select programming buttons, a Polar® Compatible
Heart Rate Receiver and Hand Held Pulse Sensors, plus 3 Interactive HR programs. You can choose from 20 levels of intensity and varieties of programs,
including 6 classic preset programs with Quick Start options, Hill Profile
Programs and the Total Trainer program for customized cross training workouts. We paid attention to every detail that would make this machine a work
of art and a fierce competitor. And it paid off.
Safety Instructions and Warnings
The 1180Er is built for optimum safety and is designed to meet or exceed all domestic
and international standards. However, certain precautions need to be followed when
operating any exercise equipment. BE SURE TO READ THE ENTIRE OWNER’S MANUAL BEFORE OPERATING YOUR 1180Er UNIT.
CAUTION – FOR SAFE OPERATION
1. Keep your hands and feet away from all moving parts and pinch points. See
figure A for possible pinch points.
2. Before beginning any exercise program on the 1180Er equipment, it is
important to consult with your physician if you have any of the following:
History of heart disease, high blood pressure, diabetes, chronic respiratory
diseases, elevated cholesterol, or if you smoke cigarettes or experience any
other chronic diseases or physical complaints.
3. If over the age of 35 or overweight, consult with your physician before
beginning any exercise program.
4. Pregnant women should consult with their physician before beginning an
exercise program.
5. If you experience dizziness, nausea, chest pains or other abnormal
symptoms during exercise, stop the exercise session immediately. Consult
your physician before continue your exercise.
6. Always drink fluids if you exercise for twenty or more minutes on any 1180Er unit.
Figure A
• The areas around the footpad &
steparm cover.
WARNING – TO REDUCE RISK OF INJURY TO YOURSELF OR OTHERS
You can count on your Diamondback Elliptical trainers to provide years of
pleasure and fitness. The solid steel frame, quality construction and technosavvy electronics are guaranteed to provide you with the ultimate workout
experience. Congratulations on choosing an elliptical from America’s premier name in light institutional and home exercising equipment.
For more information or questions regarding your 1180Er, please go to our
website at www.diamondbackfitness.com. Or please contact us:
Diamondback Fitness, Inc.
300 Camarillo Ranch Road,
Camarillo, CA 93012
Ph. 1.800.776.7642
Fax: 1.805.388.5890
4
1180 Er Owner’s Manual
1. To ensure proper functioning of your 1180Er equipment, do not install
attachments or accessories not provided or recommended by Diamondback.
2. For proper function, do not insert any objects into any opening of the equipment.
3. Always wear proper clothing and shoes when exercising on your 1180Er
unit.
4. User weight is not to exceed 350lbs/155kgs for 1180Er.
5. Keep children and pets away from 1180Er equipment. Hands and feet may
get caught in the pedals or other moving parts, which could result in serious
injury.
6. Place the 1180Er unit in an area that will meet minimum clearance
requirements: Front, Back & Sides: 2 feet/60cm.
7. Place the 1180Er equipment away from walls to allow proper ventilation. Air
should be able to circulate freely around the units. Keep all air openings free of
dirt and dust.
8. The 1180Er is intended for indoor use in the home environment. It is not
intended for outdoor use.
9. Place your 1180Er unit on a solid, level surface when in use. Adjust the leveling
pads if necessary.
10. Use the handlebar when getting on and off your 1180Er unit.
11. Make sure all components are fastened securely (i.e. handlebars, handrails,
steparms, footpads) at all times.
12. Do not remove the covers or other components. Only an authorized Diamondback
fitness dealer should perform the service.
13. SAVE THIS OPERATING INSTRUCTIONS MANUAL FOR YOUR REFERENCE.
1180 Er Owner’s Manual
5
Assembly Drawing
Assembly Instructions
Please take the assembly hardware out of the hardware package box. Lay all
the hardware out and take note for its locations. Follow the assembly
instruction step by step to complete the assembly.
Step 1: Console Mast Assembly
1. Install console mast by carefully sliding it onto console mast receptor.
2. Insert 2pcs of M10 x 100mm bolts with lock washers through the lower set
of holes on the receptor, into the console mast and to the welded nuts. Hand
tightens them first.
3. Insert 2pcs of M10 x 100mm bolts with flat washers through the upper set
of holes on the receptor, into the console mast and to the welded nuts. Hand
tightens them too.
4. Finally tighten all 4 sets of bolts with attached Allen wrench.
5. Connect the plug of the main wire harness, coming out of the console mast,
to the plug receptor coming out of base frame, taking care to install correctly.
(See plug alignment marks)
6. Store the excess harness back into the console mast and base frame. This will
keep the slack out of harness so that the wires will not be pinched and short
out. Use the attached ty-warps to tighten down the wire harness onto console
mast and base frame.
7. Place console mast covers in place and align it with each other.
8. Insert and tighten console mast cover with two screws (M5 x 8mm) using a
Phillips screwdriver.
Step 2: Handrail Assembly
1. Attach right handrail (see the R mark on the handrail) onto the console mast
at the right handrail axle.
2. Next, attach the right handrail to the right steparm. Insert the
handrail/steparm axle through the hole in the steparm and through the tube
at the bottom of handrail. Insert a M8 x 20 screw with lock washer and flat
washer into steparm axle and tighten it using an Allen wrench and an
open-end wrench on each side.
3. Insert the set-screw collar onto the handrail axle and tighten it with 2 set.
screws, using attached Allen wrench. Please make sure there is no extra play
for the handrail.
4. Assemble left handrail the same way as assembling the right handrail.
Step 3: Handrail & Steparm Covers Assembly
1. Attach a set of steparm covers onto steparm using 2pcs of M5 x 8mm screws
and a Phillips screwdriver.
2. Attach a set of handrail covers onto handrail using 2pcs of M4 x40mm screws
and nuts, using a Phillips screwdriver.
3. Install the soft handrail grip onto the handrail axle by pushing it onto the axle
all the way.
4. Repeat the process of item 1, 2 and 3 for the other side.
Step 4: U Handlebar Assembly
1. Insert the hand pulse harness through the opening of the console mast and
out of the console mounting plate.
2. Assemble the handlebar onto the mount and insert and tighten the two M8 x
35mm screws using an Allen wrench. Be sure not to pinch the hand pulse
6
1180 Er Owner’s Manual
1180 Er Owner’s Manual
7
Assembly Instructions
harness during this procedure, as this will damage the electronic console.
Step 5: Console Assembly
1. Connect both plugs, from main wire harness and hand pulse harness, to the
plug receptors on the backside of the console, taking care to install correctly
(see plug alignment marks). WIRING HARNESS INSTALLATION HINT: Any
excess wiring must be carefully inserted (“storied”) back into the console mast
before installing the console onto the console mounting plate.
2. Fasten the console to the console mounting plate with the four M5 x 12mm
screws and washers, using a Philips screwdriver.
Step 6: Water Bottle & Leveling Pads
1. Place the water bottle into the water bottle holder.
2. Adjust the leveling pads if necessary, located on the front stabilizer bottom, to
ensure your equipment is leveled with floor.
BodyFit Angle Adjustment
The 1180Er is equipped with bodyfit ellipse angle adjustment system to fit your
exercise better. The different ellipse angle will change the form of your elliptical
exercise; the higher ellipse angle will make your elliptical motion feel more like an
Uphill Climbing and the lower ellipse angle will make the ellipse motion feel more
like a Skiing/Jogging exercise. The different ellipse angle will result in different difficulties of exercises even though you are in the same resistance level.
Positions:
The Difference in Ellipse Angle:
There are 3 angle adjustments on the 1180Er — Position 1–3, position 1 being the
position closest to user and position 3 being farthest away from user. See figure on
the right.
At position 1, the ellipse angle is 9 degrees higher than position 3 and the step
motion will feel more like hill climbing. It also will bring you closer to the console
mast.
At position 3, the ellipse angle is more flat and feels more like a sprint. It also pushes user away from the console mast.
Ellipse angle
Difference
Position 1
In order to get the best workout experience, it is recommended to try all three positions first. Find the best one to fit your workout preference and your body features
and adjust it for your workout.
Front
Position 3
Adjusting the Ellipse Angle:
To adjust the position of the footpad, please follow below steps for adjustment:
1. Turn the adjusting knob clockwise all the way down to loosen the pivot
structure. See figure on the right.
2. It is recommended that you step on the floor and face the back of the
console. Then put both hands under handles and raise the pivot structure.
3. Move the pivot structure to the next desired position and rest it down. Make
sure the pivot axle is inside the groove securely.
4. Turn the adjusting knob counter clockwise to tighten the knob. Make sure
there is no additional movement on the pivot structure after locking and the
whole structure is securely locked in place.
Pivot Structure
Loosen
Tighten
Caution: Not tightening down the adjusting knob properly may
result in a fall or injury
Adjusting Knob
8
1180 Er Owner’s Manual
1180 Er Owner’s Manual
9
Workout guidelines
Workout guidelines (continued)
Good health is an exercise in common sense
Medical research has shown us that there is an amount of exercise, which is
enough to condition the cardio respiratory system and the muscles of the body.
The Surgeon General released a new study in 2001, The Surgeon General’s Call
This amount of exercise is between 60% and 85% of your maximum heart rate
To Action To Prevent and Decrease Overweight and Obesity. It indicates that 61%
measured during a training session. This range allows enough exercise to achieve
of American adults are either overweight or obese. The story states that overweight
fitness, but not an excessive amount to cause injury. Your heart rate is an excellent
increases the risk of health problems, such as heart disease, certain type of cancer,
indicator of the amount of stress placed on the cardiovascular system. Taking full
type 2 diabetes, etc. It further points out that overweight needs to be regarded pri-
advantage of this information, the 1180Er is designed to include heart rate moni-
marily as a Health rather than as an Appearance issue.
toring features.
The Surgeon General’s Healthy weight advice for consumers is:
If exercise intensity is too low or too high, no gains will be made in fitness. If the
1. Aim for a healthy weight: Find your Body Mass Index (BMI) on the chart below.
intensity is too low, the stress levels are ineffective. If the intensity is too high, injury
2. Be active: Keep physically active to balance the calories you consume.
or fatigue may set your exercise program back as you try to recover.
3. Eat well: Select sensible portion sizes.
The best way to monitor exercise intensity is to accurately count your pulse during
BMI = (weight (lb) ÷ height2 (in)) x 703
exercise. Your heart rate can easily be determined by counting your pulse at the
Weight in Pounds
Height in Feet and Inches
120 130 140 150 160 170 180 190 200 210 220 230 240 250
4’6
4’8
4’10
5’0
5’2
5’4
5’6
5’8
5’10
6’0
6’2
6’4
6’6
6’8
29
27
25
23
22
21
19
18
17
16
15
15
14
13
31
29
27
25
24
22
21
20
19
18
17
16
15
14
34
31
29
27
26
24
23
21
20
19
18
17
16
15
36
34
31
29
27
26
24
23
22
20
19
18
17
17
39
36
34
31
29
28
26
24
23
22
21
20
19
18
41
38
36
33
31
29
27
26
24
23
22
21
20
19
43
40
38
35
33
31
29
27
26
24
23
22
21
20
46
43
40
37
35
33
31
29
27
26
24
23
22
21
48
45
42
39
37
34
32
30
29
27
26
24
23
22
51
47
44
41
38
36
34
32
30
28
27
26
24
23
53
49
46
43
40
38
36
34
32
30
28
27
25
24
56
52
48
45
42
40
37
35
33
31
30
28
27
25
58
54
50
47
44
41
39
37
35
33
31
29
28
26
60
56
52
49
46
43
40
38
36
34
32
30
29
28
chest, wrist or at the carotid artery on your neck. It is difficult to count your own
pulse during exercise, mainly because you cannot count fast enough to get an accurate number. The 1180Er is equipped with a wireless telemetry receiving system.
What it does is automatically count your heart rate while you are wearing a heart
rate chest belt during your exercising period. Heart rate is monitored and electronically displayed as a digital readout. Your target heart rate, the intensity needed to
improve cardiovascular fitness, depends primarily on your age and not your state of
fitness. It is calculated as a percentage of your maximum heart rate, estimated as
220 minus your age. It is most effective to train at your target heart rate between
60% and 85% of your maximum heart rate.
Heart Rate Guidelines
60% - 85% Maximum Target
Maximum Heart Rate & Training Zone
To calculate your maximum heart rate and find your training zone, use the following formula. An example has been provided below based for a 35-year
–old person:
Healthy Weight
Overweight
Obese
Note: This chart is for adults (aged 20 years and older).
Heart rate is an important key to your exercise.
Ages in years
220 – Age = Maximum Heart Rate
(220 – 35 = 185)
60% of Maximum Heart Rate
(60% x 185 = 111bpm)
85% of Maximum Heart Rate
(85% x 185 = 157bpm)
Training Zone:
111bpm – 157bpm
▲ = 85% ■ = 60%
The Surgeon General also released a report on physical activity and health. This
report definitively stated that exercise and fitness are beneficial for a person’s
Note: Always enter your age into the console before you exercise to
health and redefined that exercise is a key component of disease prevention and
keep the % of your maximum heart rate accurate.
healthier living.
10
1180 Er Owner’s Manual
1180 Er Owner’s Manual
11
Workout guidelines (continued)
Workout guidelines (continued)
Quantity & Quality
HEART RATE MONITORING DEVICES
It is recommended that you accumulate at least 30 minutes of physical activity most
Typical Target Zone Exercise
Patterns for 35 year-old
days of the week. Physical activity should be initiated slowly and the intensity
Pulse Hand Grips (Standard)
should be increased gradually. You should select activities that you enjoy and can
The 1180Er unit is heart rate controlled and comes standard with stainless steel pulse
fit into your daily life. Having Diamondback equipment at home certainly gives you
handgrips. To activate, gently grasp both handgrips to obtain a heart rate reading.
the comfortable and convenient workout you want.
(Note: It is recommended to wear a chest strap for Heart Rate control program, as it
is more accurate. If you wear a chest strap and use hand grips at the same time for
The American College of Sports Medicine makes the following recommendations
heart rate monitoring purpose, please note the console will take the measurement of
for the quantity and quality of training for developing and maintaining cardio res-
the chest strap.)
piratory fitness in healthy adults:
Operating Tips:
• An activity that uses large muscle groups, maintained continuously, and is
rhythmical and aerobic in nature.
• Duration: 20 to 60 minutes of continuous aerobic activity, including a
warm-up and cool-down period for each exercise session.
If you are not getting a consistent reading while using the hand pulse option, we
recommend the following suggestions:
• Make sure that the palms of the hands are touching the contact area of each
hand pulse grip.
• Frequency: 3 to 5 times per week.
• Maintain an even pressure on the grips.
• Intensity: 60% to 85% of maximum heart rate.
• Do not hold the hand pulse grips too tightly.
• In addition to aerobic exercise, it is recommended that you add strength
training of moderate intensity twice per week to your program.
Chest Strap (Standard)
The 1180Er is equipped a built-in receiver and a chest strap for your heart rate
Get a smart start on exercising.
monitoring. To get an accurate reading using these devices, you will need to be
Anyone over the age of 35, as well as younger persons whom are overweight,
within three feet of the console, and a minimum of four feet from others using a
should check with his/her physician before beginning any type of exercise pro-
heart rate monitoring device.
gram. People who have diabetes or high blood pressure, a family history of
heart disease, high cholesterol or have lead a sedentary lifestyle should protect
(Note: The transmitter may fluctuate erratically if you are too close to other heart
themselves with a medical check-up and a stress test, preferably administered
rate monitoring equipment or there is other electronics near by, such as TV,
during exercise by a healthcare professional.
Radio...)
1. Always stretch before your workout to loosen muscles, and afterwards to cool
The receiver of the wireless ECG system is built into the console unit of the
Diamondback 1180Er equipment. While using heart rate control modes, the com-
down.
2. The first few minutes of your workout should be devoted to warming up muscles
before a vigorous workout, and building your heart rate slowly.
3. After your aerobic workout of about 24-32 minutes, spend 10 minutes
gradually reducing your heart rate with a lower resistance level.
puter monitors the exact measurement of and control over the activity if the heart.
Heart rate frequency is displayed while the computer continually compares heart
rate to the preprogrammed personal data. The computer adjusts the wattage to
maintain heart rate at the preprogrammed level.
Remember, to start slow, with intensity low, until you build endurance and strength.
And always consult your physician before beginning any exercise program.
12
1180 Er Owner’s Manual
1180 Er Owner’s Manual
13
Console
Workout guidelines (continued)
How to Wear Your Sensor/ Transmitter
1. Buckle one end of the chest strap onto the transmitter.
2. Adjust the band length so that the fit is snug, but not too tight.
3. Buckle the other end of the chest strap onto the transmitter.
4. Center the transmitter on your chest below the pectoral muscle (breasts).
5. Stretch the transmitter away from your chest and moisten the conductive electrode
strips located next to the buckles with water.
(Note: The transmitter is on automatically when being worn. It is off when it is not connected to your body. However, as moisture may activate the transmitter, thoroughly dry
the transmitter to prolong battery life.)
Glossary of Terms
• Idle mode = Console is reset and waiting for an entry. The message display
window will flash a message of “Select a program”.
• LED = The lights on the face of the console.
• Watts = The rate of energy currently being expended.
• Work = The amount of energy expended during exercise.
• Intensity level = The resistance provided by this elliptical. The resistance
gradually increases as the level goes up.
Default values
Erratic Heart Rate Readings:
Erratic readings on the receiver can be caused by electromagnetic disturbances. If the
heart rate readings appear to be abnormal, check that your 1180Er product is not
within range of other strong electromagnetic signals. Common sources are televisions,
computers, cars, cell phones, TV antennas and high voltage power lines (both above
and below ground). Please note: Static electricity in clothing or a flapping shirt can
cause electrical interference, so some items of clothing, i.e. man-made fibers, can also
be the cause. Please try wetting the t-shirt in the area where the transmitter is.
• Age = 35 years
• Weight = 155 lb or 70kg for Metric system
• Time = 30 minutes; Segment time = 30/14 minutes.
• Intensity level: Level 1.
• Target HR = 120bpm
Intensity Level Definition
The intensity level (L) is controlled by the brake resistance wattage output (R). There
are totally 20 levels of resistance.
If the battery of the transmitter is running low, the transmission range decreases and
may cause errors similar to the ones listed above in this document
Battery Replacement:
To replace the transmitter battery, remove the four small screws securing the cover plate
in the back of the transmitter. Remove the cover plate, and the thin plastic shield covering the battery, Remove the battery and replace with a new CR 2032 battery (available at photo or watch departments). Make sure the battery snaps into place and the
numbers are facing up. Replace the plastic shield and cover plate with four screws.
14
1180 Er Owner’s Manual
• For Quick Start and Manual program, the intensity level = Resistance level,
L1 = R1 and L20 = R20.
• For all other programs, the intensity level ≠ Resistance level, see below charts
for details.
Intensity Level vs. Resistance Level
1180 Er Owner’s Manual
15
Console (continued)
Console (continued)
Operating Tips
•
If START key is pressed, the new program will begin.
This console is designed to prompt instructional messages during each phase of a pro-
•
If 15 seconds passes the message scrolling and neither START or ENTER
key is pressed, the program will resume back to previous activities.
gram to guide you through the setup, the executing as well the ending. Follow these
instructions, you will find that they are extremely helpful and this console is very simple
•
Switching a program during a program-executing mode: The new
program time will be the remaining time of previous program.
to use.
•
• Power On and Off:
Switching a program during program-ending mode: The message display
will prompt a message for time setting.
Simply start pedaling to turn the power on and stop pedaling to turn the
power off.
• Re-start a program:
The user may re-start a program after the program ends. Simply press
• Stop or Pause a Program:
“Start” key during workout summary mode. The program will be
To stop or reset a program during its operations, press “STOP/Pause” key
started immediately. The default values will remain the same as previous
twice. The first key press will pause the program for up to 5 minutes and the
program; the calories and distance will continue accumulating.
second key press will stop the program and reset. When the program resets,
the console returns to program select mode.
•
•
Intensity adjustment:
During program setting, user may press Up/Down key to adjust the
program’s intensity level from L1 to L11. See above intensity level chart
• Resume a Program:
for details. The message display will update the intensity level
accordingly, but the dot matrix program profile will remain the same.
To resume a program after pause, simply press “START” key once, the program
will resume to where was left off.
•
During program executing, user may press Up/Down key to adjust
individual segment’s resistance level. The intensity level data display will
remain not changing, but the program profile on dot matrix display will
• Save a program:
adjust accordingly. The adjustment will only take effect on the individual
segment and will not affect the remaining of the program.
To save a program during anytime of a program into USER 1 program, press
and hold ‘USER 1” key. To save a program into USER 2 program, press and
hold “USER 2” key. When the program is saved successfully, the message
(Note: Resistance adjustments are not allowed in any Heart rate interactive
display will scroll a message of “YOUR PROGRAM HAS BEEN SAVED”.
program).
By saving a program, all the setting of this program will be saved into the
selected User program.
•
% MAX HR: Pulse ÷ (220 minus age).
It is recommended to control your % Max heart rate within 60% – 85%
for the most effective workout. It is also unsafe to exceed 90% and above.
• Switching a program:
The user may switch from current operating program to another program by
This elliptical is equipped with a safety shut off function when the %HR
exceeds 95%.
pressing a new program key and then press “ENTER” key to accept the new
program. Calories and distance will continue accumulating from previous
There is an English & Metric setting switch located on the back of the console.
program.
•
• English/Metric setting:
If another program key is pressed during a program-executing mode, it
will enter program-switching mode. The message display will scroll
“PRESS ENTER TO ADJUST OR START TO BEGIN”
•
If ENTER key is pressed, it will enter this program setup mode. The
message display will prompt the next setting message for your instruction.
16
1180 Er Owner’s Manual
1180 Er Owner’s Manual
17
Console Layout
Dot matrix window
Workout
program
keys
User
programs
Data display
selecting
keys
Alphanumeric
/Message
window
Function keys
18
1180 Er Owner’s Manual
1180 Er Owner’s Manual
19
Console Layout (continued)
Console Layout (continued)
Displays
Function Keys:
a. Dot Matrix /Profile display
Up/Down keys:
Dot Matrix/Profile
display
1. It displays the program profile during the program setup and executing modes.
• Displays the Intensity profile during the Preset profile programs.
• Displays the % Max HR profile during the HR interactive programs.
• Displays the intensity profile and running track during Sprint program.
2. Profile definitions:
• Intensity profile – The LED represents the resistance level, the higher LED
lights up, the higher resistance it is on. The LED will blink to indicate the
current workout segment.
• Pulse profile – The LED represents the actual pulse reading, 90bpm –
180bpm, every LED = 10bpm increment.
• % Max HR profile – The LED represents the % Max HR: 0-100%
b. Message/Workout data display
Message/Workout
Display
20
1. During a program setup, this display will scroll the messages to guide you through
the setup process.
2. In the Total Training program, it will display additional messages to guide you
on total body workout.
3. During workout, it also acts as data display window and displays four datas at
the same time. You may press “SELECT” button to switch the displays between the
upper & lower row. An associated LED will light up to indicate which row of dis
play is on. The default displays are the “time, intensity level, calories and
stride/min” on the upper row.
1. Time (min: sec:) Time (min: sec): The remaining of current program time.
2. Intensity level: Current program intensity level.
3. Calories (kcal): Total workout calories.
4. Stride/MIN: stride per minute.
5. Strides: Total strides.
6. Distance (mile or km): Total workout distance. It simulates as a jogging
exercise.
7. Watts (watt): Current workout wattage.
8. Pulse (bpm): Your current heart rate. If there is no pulse detected, it will
display “P“ instead.
9. % HR (%): Current workout % Max HR.
4. Pulse & % HR displays will each be displayed for 10 seconds back and forth.
And an associated LED will light up to indicate the display.
1. You may press “ENTER” key during a program to pick a display for the
entire program or “ENTER” again to switch to the other one.
2. When the program is ended or reset, the display will resume back to
switch between these two displays every 10 seconds.
3. When the program is saved into a User program, the pulse & %HR dis
plays of this User program will resume to display back & forth. You may
press “ENTER” key to pick a display.
1180 Er Owner’s Manual
1. During program setup, press “UP/Down key” to adjust the following – age,
weight, time, intensity level & HR setting.
2. After program started, press “Up/Down key” to adjust the individual segment’s
resistance level, or HR setting during exercising.
Enter key:
1. After program selecting, press “Enter” to accept the program and enter its setup
mode.
2. After age, weight, intensity level….. adjustment, press “Enter” key to accept your
entry.
3. During program, press “Enter” to switch the data display of Pulse and % max HR.
Function Keys
Start key:
1.
2.
3.
4.
Press
Press
Press
Press
“Start/Resume” key during idle mode to enter Quick Start program.
“Start/Resume” key to start a program during program setup.
“Start /Resume” key during pause mode to resume to the program.
“Start” to re-start a program during program ending.
Stop/Reset key:
1. Press “Stop/Pause” once to pause the program.
2. Press “Stop/Pause” twice to end program and reset the console.
1180 Er Owner’s Manual
21
Workout Programs
Getting Started
A Quick Start program is for someone who wants to bypass the setup mode and start
their workouts right away. By picking Quick Start program, you are accepting the
default values for calculations. Be sure to include a warm-up and cool-down period as
part of your workout.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
To begin this program, press “START” key once or continue to pedal and press no key
for 30 seconds.
Program Default Values
• Time = 30 minutes
• Intensity level =L1.
During the Program
Display
• As soon as the “START” button is pressed, this program will begin. The message
display will turn into workout data display and display four default data: time,
intensity level, calories & stride/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level from L1 to L20
during anytime of the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
the remaining of the program and the dot matrix window will update the
intensity profile accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When 30-minute duration is up, there will be a beep to signifying the end of
this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
22
1180 Er Owner’s Manual
Workout Programs (continued)
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
You could build your own profile with Manual program. The LED profile displaying on
the dot matrix window represents intensity level for each segment. Initially, there is only
one row of LED will light up on dot matrix, but it will be adjusted if the UP/DOWN key
is pressed. Be sure to include a warm-up and cool-down period as part of your workout.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “MANUAL” key to enter this program. Its program LED indicator will light up.
Manual
Program Key
Accepting default values or Entering the program setup mode
When the MANUAL key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Manual program
workout.
• Default Time = 30 minutes
• Default Intensity level = L1.
• Or press “ENTER” key to enter program setup mode. The message display will
take you through the program setup mode step by step as below:
Entering Age
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.
2. You may press “UP/DOWN” key to adjust the age.
3. After age adjustment, then press “ENTER” to accept and enter weight
adjustment.
Entering Weight
1. If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND
ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.
(WEIGHT = XXX KG” for metric system)
2. You may press “UP/DOWN” key to adjust the weight.
3. After weight adjustment, then press “ENTER” to accept and enter Time
adjustment.
1180 Er Owner’s Manual
23
Workout Programs (continued)
Entering Time
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
TIME AND START TO BEGIN”, then “TIME = 30 MIN” will be blinking.
2. You may press “UP/DOWN” key to adjust the time.
3. After time adjustment, the program setting is now completed. Press “START” key
to start Manual program.
Note: you may press START key at anytime during this program setting to skip
the adjustment and begin workout. By doing so, the console will use default
value of age and weight for calculations.
During the Program
Display
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
• If no pulse is detected, the pulse display will show “P” until there is a pulse.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level from L1 to L20
during anytime of the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
the remaining of the program and the dot matrix window will update the
intensity profile accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The con
sole will be reset to idle mode. No workout data will be saved for next
workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
24
1180 Er Owner’s Manual
Workout Programs (continued)
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The Random program is designed to allow the user to choose from an unlimited number of computer generated profiles. The LED profile displaying on the dot matrix window represents intensity level for each segment. Each time, the “RANDOM” program
key is pressed; the console will generate a different profile.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “RANDOM” key to enter this program. Its program LED indicator will light up.
Accepting default values or Entering the program setup mode
When the RANDOM key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Random program
workout.
• Default Time = 30 minutes
• Default Intensity level = a computer generated intensity profile with default
Intensity level = L1.
• Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below:
Random
Program Key
Entering Age
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.
2. You may press “UP/DOWN” key to adjust the age.
3. After age adjustment, then press “ENTER” to accept and enter weight
adjustment.
Entering Weight
1. If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND
ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.
(WEIGHT = XXX KG” for metric system)
2. You may press “UP/DOWN” key to adjust the weight.
3. After weight adjustment, then press “ENTER” to accept and enter Time
adjustment.
Entering Time
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
TIME AND ENTER TO ACCEPT”, then “TIME = 30 MIN” will be blinking.
1180 Er Owner’s Manual
25
Workout Programs (continued)
2. You may press “UP/DOWN” key to adjust the program time
3. After time adjustment, then press “ENTER” key to accept and enter Intensity level
adjustment.
Entering Intensity level
1. If Enter key is pressed, the message window will scroll a message of “SELECT
INTENSITY LEVEL AND START TO BEGIN”, then “INT LEVEL = 01” will be
blinking.
2. You may press “UP/DOWN” key to adjust the intensity level from L1 to L11.
3. After intensity level adjustment, the program setting is now completed. Press
“START” key to start Random program.
Workout Programs (continued)
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key. See Console Operating Tips section for details.
Note: you may press START key at anytime during this program setting to skip
the adjustment and begin workout. By doing so, the console will use default
value of age and weight for calculations.
During the Program
Display
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
• If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
26
1180 Er Owner’s Manual
Getting Started
The Sprint program is designed to simulate a running exercise. The LED profile displaying on the right side of dot matrix window represents intensity level for each segment.
Dot matrix display also displays a running track on the left side to indicate how close
you are to the finish line. With the special designed Dot matrix display, you will know
your goal and your intensity at the same time. It is a great sprint-training program.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “SPRINT” key to enter this program. Its program LED indicator will light up.
Accepting default values or Entering the program setup mode
When the SPRINT key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Sprint program
workout.
• Default Time = 30 minutes
• Default Intensity level = a preset intensity profile with default
Intensity level = L1.
• Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below: (same as Random
program setup)
• Enter Age
• Enter Weight
• Enter Time
• Enter Intensity level
Sprint
Program Key
Note: you may press START key at anytime during this program setting to skip
the adjustment and begin workout. By doing so, the console will use default
value of age and weight for calculations.
During the Program
Display
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
1180 Er Owner’s Manual
27
Workout Programs (continued)
•
Workout Programs (continued)
If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The Interval program helps to build the strength of your cardiovascular system. By alternating the workload from high to low, your heart gets an effective workout. The LED profile displaying on the dot matrix window represents intensity level for each segment.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “INTERVAL” key to enter this program. Its program LED indicator will light up.
Accepting default values or Entering the program setup mode
When the INTERVAL key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Interval program
workout.
• Default Time = 30 minutes
• Default Intensity level = a preset intensity profile with default Intensity
level = L1.
• Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below: (same as Random
program setup)
• Enter Age
• Enter Weight
• Enter Time
• Enter Intensity level
Interval
Program Key
Note: you may press START key at anytime during this program setting to skip
the adjustment and begin workout. By doing so, the console will use default value
of age and weight for calculations.
During the Program
Display
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
• If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
28
1180 Er Owner’s Manual
1180 Er Owner’s Manual
29
Workout Programs (continued)
Workout Programs (continued)
•
•
•
The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The program is designed to be a Total Body workout. It includes a preset intensity profile targeting your lower body; plus message display prompts to emphasize your upper
body workout. Using this program and follow the instruction will show you that your
elliptical is not just for cardiovascular exercise, it will achieve your cross training goal,
too! The LED profile displaying on the dot matrix window represents intensity level for
each segment.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “TOTAL TRAINER” key to enter this program. Its program LED indicator will light
up.
Total Trainer
Program Key
30
Accepting default values or Entering the program setup mode
When the TOTAL TRAINER key is pressed, the message window will scroll a message
“PRESS ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Total trainer
program workout.
• Default Time = 30 minutes
• Default Intensity level = a preset intensity profile with default Intensity
level = L1.
1180 Er Owner’s Manual
•
Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below: (same as Random
program setup)
• Enter Age
• Enter Weight
• Enter Time
• Enter Intensity level
Note: you may press START key at anytime during this program setting to skip the
adjustment and begin workout. By doing so, the console will use default value of
age and weight for calculations.
During the Program
Display
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
• If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
• User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
• Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE, CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
1180 Er Owner’s Manual
31
Workout Programs (continued)
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The Target Heart Rate program is designed to keep you training at your chosen heart
rate level. Computer will adjust the intensity level automatically to ensure the target heart
rate is achieved and maintained during the entire program. The 1st LED segment displaying on the dot matrix window represents the current intensity level.
A HEART RATE MONITORING DEVICE MUST BE USED FOR THIS PROGRAM.
FOR BETTER RESULTS, A CHEST STRAP IS RECOMMENDED FOR THIS
OPERATION.
IMPORTANT: It is unsafe to exceed 95% of your maximum heart rate
while exercising. Please consult your physician before performing any
Heart Rate based training program.
Target HR
Program Key
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “TARGET HR” key to enter this program. Its program LED indicator will light up.
Accepting default values or Entering the program setup mode
When the TARGET HR key is pressed, the message window will scroll a message
“PRESS ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Target HR
program workout.
• Default Time = 30 minutes
• Default Target HR = 120bpm.
• Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below:
Entering Age
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.
2. You may press “UP/DOWN” key to adjust the age.
3. After age adjustment, then press “ENTER” to accept and enter weight
adjustment.
Entering Weight
1. If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND
ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.
(WEIGHT = XXX KG” for metric system)
2. You may press “UP/DOWN” key to adjust the weight.
32
1180 Er Owner’s Manual
Workout Programs (continued)
3. After weight adjustment, then press “ENTER” to accept and enter Time
adjustment.
Entering Time
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
TIME AND ENTER TO ACCEPT”, then “TIME = 30 MIN” will be blinking.
2. You may press “UP/DOWN” key to adjust the program time
3. After time adjustment, then press “ENTER” key to accept and enter Target HR
adjustment.
Entering Target HR
1. If Enter key is pressed, the message window will scroll a message of “SELECT
TARGET HR AND START TO BEGIN”, then “TARGET HR = 120” will be
blinking
2. You may press “UP/DOWN” key to adjust the Target HR from 90bpm to
185bpm.
3. After Target HR adjustment, the program setting is now completed. Press
“START” key to start Target HR program.
Note: you may press START key at anytime during this program setting to skip the
adjustment and begin workout. By doing so, the console will use default value of
age and weight for calculations.
During the Program
Display
• This program will not be started until a valid pulse is detected. If no pulse is
detected, the message window will display “CHECK YOUR PULSE”. Make sure
your heart rate device is properly operated.
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
Adjustment
• Press “UP/DOWN” key to adjust the Target HR during anytime of the program.
• Each time, the UP/DOWN key is pressed, the message window will display
“TARGET HR = XXX” and adjust it accordingly. When the adjustment is over, it
will resume displaying the workout data.
• The Target HR will be adjusted for the remaining program.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
1180 Er Owner’s Manual
33
Workout Programs (continued)
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The Heart Rate Interval program is designed to alternate periods of hard work (Work
phase) with periods of easy work (Rest phase). The console will adjust the resistance
level up to meet your Work heart rate goal and adjust it down to recover. The LED displaying on the dot matrix window represents the pulse profile, 90bpm as the 1st row
and 180bpm as the 10th row.
A HEART RATE MONITORING DEVICE MUST BE USED FOR THIS PROGRAM. FOR BETTER RESULTS, A CHEST STRAP IS RECOMMENDED FOR
THIS OPERATION.
HR Interval
Program Key
IMPORTANT: It is unsafe to exceed 95% of your maximum heart rate
while exercising. Please consult your physician before performing any
Heart Rate based training program.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “HR INTERVAL” key to enter this program. Its program LED indicator will light up.
34
Workout Programs (continued)
you through the program setup mode step by step as below:
Entering Age
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.
2. You may press “UP/DOWN” key to adjust the age.
3. After age adjustment, then press “ENTER” to accept and enter weight
adjustment.
Entering Weight
1. If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND
ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.
(WEIGHT = XXX KG” for metric system)
2. You may press “UP/DOWN” key to adjust the weight.
3. After weight adjustment, then press “ENTER” to accept and enter Time
adjustment.
Entering Time
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
TIME AND ENTER TO ACCEPT”, then “TIME = 30 MIN” will be blinking.
2. You may press “UP/DOWN” key to adjust the program time
3. After time adjustment, then press “ENTER” key to accept and enter Lower HR
adjustment.
Entering Lower HR Goal
1. If ENTER key is pressed, the message window will scroll a message of “ADJUST
LOWER HR GOAL AND ENTER TO ACCEPT”, then “LOWER HR = 120BPM”
will be blinking
2. You may press “UP/DOWN” key to adjust the HR from 90bpm to 175bpm.
3. After Lower HR adjustment, then press “ENTER” key to accept and enter Upper
HR adjustment.
Entering Upper HR Goal
1. If ENTER key is pressed, the message window will scroll a message of
“ADJUST UPPER HR GOAL AND START TO BEGIN”, then
“UPPER HR = 150BPM” will be blinking
2. You may press “UP/DOWN” key to adjust the HR from 100bpm to 185bpm.
3. After Upper HR adjustment, the program setting is now completed. Press
“START” key to start HR Interval program.
Note: you may press START key at anytime during this program setting to skip the
adjustment and begin workout. By doing so, the console will use default value of
age and weight for calculations.
Accepting default values or Entering the program setup mode
When the HR INTERVAL key is pressed, the message window will scroll a message
“PRESS ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin HR Interval
program workout.
• Default Time = 30 minutes
• Default Lower HR goal = 120bpm, Upper HR goal = 150bpm.
• Or press “ENTER” to enter program setup mode. The message display will take
During the Program
Display
• This program will not be started until a valid pulse is detected. If no pulse is
detected, the message window will display “CHECK YOUR PULSE”. Make sure
your heart rate device is properly operated.
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
1180 Er Owner’s Manual
1180 Er Owner’s Manual
35
Workout Programs (continued)
Adjustment
• There is no program setting adjustment allowed during program executing and
“UP/DOWN” key will not function at this time.
IMPORTANT: It is unsafe to exceed 95% of your maximum heart rate
while exercising. Please consult your physician before performing any
Heart Rate based training program.
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page 16.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “CARDIO” key to enter this program. Its program LED indicator will light up.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end
of this program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Getting Started
The Cardio program is designed to keep you heart rate at your anaerobic stage. The
heart rate is maintained at 80% of Max heart rate to develop your lactic acid system
and build your strength most effectively. The LED displaying on the dot matrix window
represents the % max HR profile, 0% as the 1st row and 100% as the 10th row. The
blinking one is your current % max HR and the right side ones are the targeted 80%
max HR.
Cardio
Program Key
36
Workout Programs (continued)
A HEART RATE MONITORING DEVICE MUST BE USED FOR THIS PROGRAM. FOR BETTER RESULTS, A CHEST STRAP IS RECOMMENDED FOR
THIS OPERATION.
1180 Er Owner’s Manual
Accepting default values or Entering the program setup mode
When the CARDIO key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
• Press “START” key to accept current default values and begin Cardio program
workout.
• Default Time = 30 minutes
• Default % Max HR = 80%.
• Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below:
Entering Age
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.
2. You may press “UP/DOWN” key to adjust the age.
3. After age adjustment, then press “ENTER” to accept and enter weight
adjustment.
Entering Weight
1. If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND
ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.
(WEIGHT = XXX KG” for metric system)
2. You may press “UP/DOWN” key to adjust the weight.
3. After weight adjustment, then press “ENTER” to accept and enter Time
adjustment.
Entering Time
1. If Enter key is pressed, the message window will scroll a message of “ADJUST
TIME AND ENTER TO ACCEPT”, then “TIME = 30 MIN” will be blinking.
2. You may press “UP/DOWN” key to adjust the program time
3. After time adjustment, the program setting is now completed. Press “START” key
to start the Cardio program.
During the Program
Display
• This program will not be started until a valid pulse is detected. If no pulse is
detected, the message window will display “CHECK YOUR PULSE”. Make sure
your heart rate device is properly operated.
• Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
• Press “SELECT” button next to the data display window to select your desired
data display.
1180 Er Owner’s Manual
37
Workout Programs (continued)
Workout Programs (continued)
Adjustment
There is no program setting adjustment allowed during program executing and
“UP/DOWN” key will not function at this time.
•
Pause, Reset, Switch or Save a program
• See Console Operating Tips section for details, page16.
Ending the Program
• When selected program time is up, there will be a beep to signifying the end of this
program.
• The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
• After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter another
program during this period of time, see below for details.
• If no key is pressed, it will resume back to scroll a message “PROGRAM ENDED,
TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be repeated for 30
seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
•
SAVED” to indicate the success of saving the program. After this message, the
console will resume to previous activities.
Following information of this program will be saved:
• Age & Weight
• Program time
• Intensity level, dot matrix profile
• HR setting if it is a HR Interactive program
If there was a program saved in the User 1 or User 2 before, the new program
will overwrite the pervious program.
Select User Program and Beginning the Program
Press “User 1” or “User 2” key and release quickly to enter a User program anytime
during idle mode. Its associated LED indicator will turn on to indicate which user program is selected.
• If there was no saved program in this User program, the message display will
scroll, “NO SAVED PROGRAM, SELECT ANOTHR PROGRAM” and wait for an
instruction.
• If there was a saved program, the dot matrix will display the program profile;
the message display will scroll a message of “PRESS ENTER TO ADJUST OR
START TO BEGIN”.
• Press “START” key to accept current default values and begin User program
workout.
• Or press “ENTER” to enter program setup mode. The message display will
skip Age and Weight entry and take you through the program setup mode
step by step as below:
• Entering Time
• Other entry if necessary, see each program page for program setting
details.
Save this program
• To save this program, see Console Operating Tips section for details
• After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
During the Program
See each program page for details.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Pause, Reset, Switch or Save a program
See Console Operating Tips section for details, page 16.
User 1 & User 2
Program Keys
Ending the Program
See each program page for details.
Getting Started
These programs are designed to be user-friendly tools. You can build your own programs and save them for later workout. With this function, you will be able to call up
your favorite program, which stores all of your accurate user information, and begin
your exercise right away.
Save a program into User 1 or User 2
To save your favorite program into User 1 or User 2 during anytime of a program, press
& hold “USER1” or “USER2” until there is a beeping sound confirming the saving.
• The message display will scroll a message of “YOUR PROGRAM HAS BEEN
38
1180 Er Owner’s Manual
1180 Er Owner’s Manual
39
Domestic warranty Information
Maintenance
CAUTION – FOR SAFE OPERATION
Always inspect hardware prior to any exercise session. Look for loose hardware, loose
pedals, loose handrails, loose cranks and frayed wires. Repair or replace any damaged or worn parts, tighten all loose hardware.
After workout, always wipe down your 1180Er unit. Perspiration that continuously settles on frame, pads or casing may eventually cause rust or damage to the unit. Damage
resulting from lack of proper maintenance will not be covered under warranty. To clean
pads, use a mild soap and warm water. Dry with a clean towel.
If noises develop or malfunctions occur, contact your authorized Diamondback Fitness
dealer.
(Applies to all product sold and placed within the continental US,
Alaska, Hawaii, and Puerto Rico only)
Effective: August 2003
Diamondback warrants its 1180Er to be free from defects in material and workmanship under normal use in the home and light instructional environments. Diamondback’s
obligation under this Warranty is limited to repair or replacement of any defective part
without charge through an authorized service agent to the original purchaser with the
following parameters:
Who is covered:
The Warranty is extended to the individual or legal entity whose name appears on the
Warranty registration card filed with Diamondback and may not be transferred to any
other individual or legal entity.
To obtain service:
To obtain service you must contact your authorized Diamondback Fitness dealer. Your
dealer is also your authorized service agent. An authorized service agent must diagnose your unit in order to determine Warranty claims/issues.
Sales where the unit is delivered unassembled (in a carton) to the end user (e.g. mail
order or Internet sales) without a service contract purchased through the dealer voids
the Warranty.
Warranty Registration:
Warranty commitments are valid only with a completed Warranty card that is returned
within 15 days from the date of purchase and includes the product serial number.
Registration is available at www.diamondbackfitness.com.
Proof of purchase from Diamondback’s authorized dealer will be required if the
Warranty card is not registered prior to any consideration of Warranty claim.
WHAT IS COVERED
Home
Maximum Usage: 14 Hours per week
Frame:
Parts & Electronics:
Normal Wear Items:
Labor:
Lifetime limited Warranty. Covers defects in welds,
materials and workmanship.
3 years
90-day limited on foam grips, pedals, etc.
1 Year
Light Institutional
Maximum Usage: 21 Hours per week
Frame:
Parts & Electronics:
Normal Wear Items:
Labor:
40
1180 Er Owner’s Manual
Lifetime limited Warranty. Covers defects in welds,
materials and workmanship.
2 years
90-day limited on foam grips, pedals, etc.
1 Year
1180 Er Owner’s Manual
41
Warranty card
Domestic warranty Information (continued)
Warranty voided if:
The Warranty does not apply to any failure of the product, or any parts of the product,
due to: assembly errors, alterations, modifications, misuse, abuse, accident, improper
maintenance, or if the serial number on the product has been removed, altered or
defaced. Assembly errors include but are not limited to:
Damaged wire harness.
Bolts used in the wrong location.
Parts & Service:
Contact the authorized Diamondback dealer where unit as originally purchased. If you
have moved, or that retailer is unavailable, use our dealer locator at
www.diamondbackfitness.com to help find another authorized dealer.
Diamondback is not responsible for arranging Warranty service and/or honoring
extended warranties provided by dealers.
Exclusions:
Warranty is void if the 1180Er unit is placed in a commercial or light commercial environment, such as health club, school, or correctional facility.
Additional Rights:
This Warranty is expressly in lieu of all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose created hereby, are limited to the
same duration as the express Warranty herein. Diamondback Fitness, Inc. shall not be
liable for any incidental or consequential damages. Some states do not allow the exclusion or limitations of implied warranties, incidental or consequential, so the above limitations and exclusions may not apply to you.
Retailers and wholesale outlets for Diamondback Fitness, Inc. products are not authorized to modify this Warranty in any way.
This Warranty gives the original owner specific legal rights. Other additional rights may
vary from state to state.
Important! • Important! • Important! • Important! • Important! • Important!
Warranty card must be completed and returned to Diamondback within 15 days of purchase. Failure to
comply may void manufacturer’s Warranty. Or, you may register your product at
www.diamondbackfitness.com.
Your Name:
Address:
City:
State:
Daytime phone No.:
Evening phone No.:
Zip:
Dealer Store Name: Address:
City:
State:
Model:
Serial No.:
Zip:
Purchase Date:
Environment Unit Placed:
❏ Home
❏ Light Institutional, i.e. Hotel, Business Center…
Diamondback Fitness, Inc.
300 Camarillo Ranch Road
Camarillo, CA 93012
Phone no. 800.776.7642
Mail completed form to:
Diamondback Fitness - Warranty Card
300 Camarillo Ranch Road
Camarillo, CA 93012
42
1180 Er Owner’s Manual
1180 Er Owner’s Manual
43