Download Weslo WLCCEX69871 User`s manual

Model No. WLCCEX69871
Serial No.
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained
technicians on our customer hot
line will provide immediate
assistance, free of charge to
you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8h00–18h00 EST
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
USER'S MANUAL
VISIT OUR WEBSITE: www.weslo.com
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW TO USE THE PURSUIT 895i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CUSTOMER RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the exercise cycle.
1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described.
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
8. When adjusting the seat, insert the seat
knob through one of the holes in the seat
post (see the drawing on page 4). Do not
insert the seat knob under the seat post.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
3. Use the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet from damage.
9. Always keep your back straight when using
the exercise cycle. Do not arch your back.
10. If you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
11. The exercise cycle is intended for in-home
use only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.
5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
6. The exercise cycle should not be used by
persons weighing more than 250 pounds
(115 kg).
12. The pulse monitor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse monitor is intended only
as an exercise aid in determining heart rate
trends in general.
7. Wear appropriate clothing when exercising;
do not wear loose clothing that could become
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
The decal shown at the right
has been placed on the exercise cycle. If the decal is missing, or if it is not legible, please
call our Customer Service
Department to order a free
replacement decal. Apply the
replacement decal in the location shown.
3
BEFORE YOU BEGIN
Thank you for selecting the new WESLO PURSUIT®
895i exercise cycle. The PURSUIT 895i blends
advanced engineering with contemporary styling to
provide you with a low-impact workout in the convenience and privacy of your own home.
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is WLCCEX69871.
The serial number can be found on a decal attached
to the PURSUIT 895i (see the front cover of this manual for the location of the decal).
For your benefit, read this manual carefully before
you use the PURSUIT 895i. If you have additional
questions, please call our Customer Service
Department toll-free at 1-888-936-4266, Monday
through Friday, 8:00 a.m. until 6:30 p.m. Eastern Time
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labelled.
Water Bottle Holder
(bottle is not included)
Handlebars
Console
Book Rack
Resistance Knob
Seat
Seat Post
Seat Knob
FRONT
Pedal
Front Wheels
BACK
RIGHT SIDE
4
PART IDENTIFICATION CHART
Use the chart below for help identifying the small
parts used in assembly. The number in parenthesis
below each part refers to the key number of the part.
The second number refers to the quantity used in
assembly. Note: Some parts may have been preattached for shipping purposes. If a part is not
found in the parts bag, check to see if it has been
pre-attached.
M8 x 90mm Carriage Bolt (9)–4
M10 x 25mm Button Screw (8)–5
M4 x 16mm Screw (4)–5
M8 Split Washer (53)–4
M10 Split Washer (31)–5
5
M8 Nylon Locknut (21)–8
ASSEMBLY
Place all parts of the PURSUIT 895i in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
Assembly requires the included allen wrench
adjustable wrenches
.
, a phillips screwdriver
1. Identify the Front Stabilizer (51), which has Wheels
(25) on the ends.
1
Hold the Front Stabilizer (51) against the saddle on
the front of the Frame (15). Attach the Front
Stabilizer with two M8 x 90mm Carriage Bolts (9)
and two M8 Nylon Locknuts (21).
and two
25
51
9
25
21
15
2
2. Make sure that there is a Stabilizer Endcap (48) on
each end of the Rear Stabilizer (52).
21
Hold the Rear Stabilizer (61) against the saddle on
the rear of the Frame (15). Make sure that the Rear
Stabilizer is turned so the square holes are facing
away from the saddle. Attach the Rear Stabilizer
with two M8 x 90mm Carriage Bolts (9) and two M8
Nylon Locknuts (21).
48
52
21
15
48
9
3
3. The Console (7) requires two “AA” batteries (not
included). Alkaline batteries are recommended.
Refer to the inset drawing. Open the battery cover
on the underside of the Console as shown. Press
two batteries into the battery compartment. Make
sure that the negative ends of the batteries
(marked “–”) are touching the springs in the
battery compartment. Close the battery cover.
Batteries
7
7
Battery Cover
Insert the console wire through the Handlebar Post
(14). Connect the console wire to the Reed Switch
Wire (54). Attach the Console (7) to the Handlebar
Post with four M4 x 16mm Screws (4).
12
4
14
4
Carefully slide the Handlebar Post (14) onto the
Frame (15). Be careful to avoid pinching the
wires inside the Handlebar Post. Attach the
Handlebar Post with three M10 x 25mm Button
Screws (8) and three M10 Split Washers (31).
Attach the Knob Housing (12) to the Handlebar Post
with an M4 x 16mm Screw (4).
6
Console
Wire
54
31
8
31
8
8
15
4. Attach the Handlebar (5) to the Handlebar Post (14)
with two M10 x 25mm Button Screws (8) and two
M10 Split Washers (31).
4
8
31
5
5. Press the Side Shield Cover (30) into the Right and
Left Side Shields (1, 2). Make sure the four Tabs (A)
on the Side Shield Cover are securely fastened to
the Side Shields.
14
5
Insert the Seat Post (20) into the Frame (15). Make
sure that the Seat Post Bushing (23) is fully seated
in the Frame. Align one of the holes in the Seat
Post with the hole in the Frame. Insert the Seat
Knob (29) into the Frame and the Seat Post, and
tighten the Seat Knob into the Frame. Make sure to
insert the Seat Knob through one of the holes in
the Seat Post; do not insert the Seat Knob under
the Seat Post.
19
53
53
21
21
20
30
Attach the Seat (19) to the Seat Post (20) with four
M8 Nylon Locknuts (21) and four M8 Split Washers
(53). Note: The Nylon Locknuts and Split Washers
may be pre-attached to the bottom of the Seat.
23
29
A
15
2
1
6. Identify the Left Pedal (28) (there is an “L” on the
Left Pedal for identification). Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the left arm of the Crank (17).
6
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank (17).
17
45
Adjust the Left Pedal Strap (45) to the desired position. Press the Pedal Strap onto the indicated
adjustment tab. Do the same with the Right Pedal
Strap (not shown).
28
Adjustment
Tab
7
HOW TO USE THE PURSUIT 895i
HOW TO ADJUST THE SEAT
HOW TO APPLY AN INFORMATION DECAL TO
THE CONSOLE
For effective
exercise, the
Seat (19) should
be at the proper
height. As you
pedal, there
19
should be a
slight bend in
your knees
when the pedals
are in the lowest
20
position. To
29
adjust the Seat,
first hold the
30
Seat and
unscrew the
Seat Knob (29).
Align one of the
holes in the
Seat Post (20) with the hole in the Side Shield Cover
(30). Insert the Seat Knob into the frame and the Seat
Post, and tighten the Seat Knob into the frame.
Caution: Make sure to insert the Seat Knob
through one of the holes in the Seat Post; do not
insert the Seat Knob under the Seat Post.
All of the information on the console is printed in
English. The included decal sheet contains the same
information in five other languages. If English is not
your language, find the decal on the decal sheet that
is printed in your language.
Next, peel the
appropriate decal
off the decal
sheet. Apply the
decal to the
console in the
location shown.
HOW TO ADJUST THE PEDALLING RESISTANCE
To vary the
intensity of your
exercise, the
pedalling resistance can be
adjusted. The
resistance is
controlled with
the Resistance
10
Knob (10). To
increase the
resistance, turn
the Resistance
Knob clockwise;
to decrease the
resistance, turn
the Resistance Knob counterclockwise.
BATTERY INSTALLATION
Before the console can be operated, two “AA”
batteries must be installed. If you have not installed
batteries, see assembly step 3 on page 6.
8
DIAGRAM OF THE CONSOLE
2. When the power is turned on, the upper LCD
display will begin displaying the Calories, Laps,
Speed, Time, and Distance modes. Each mode will
be displayed for five seconds in a repeating cycle.
Flashing arrows in the display will show which
mode is currently displayed.
Upper
LCD
Display
3. The LED track represents a distance of 1/4 kilometer. As you exercise, the indicators around the track
will light one at a time until you have completed 1/4
kilometer. A new lap will then begin.
Lower
LCD
Display
LED Track
4. To measure
your pulse, stop
pedalling and
place your
thumb on the
pulse sensor as
shown. The
pulse sensor is
pressure-activated—fully press it down. Do not
press too hard, or the circulation in your thumb
will be restricted, and your pulse will not be
detected. Next, slightly raise your thumb until the
heart-shaped indicator in the lower LCD display
flashes steadily. Hold your thumb at this level. After
5 to 10 seconds, three dashes will appear in the
display and your pulse will be shown. Hold your
thumb on the sensor for another 15
seconds for the most accurate reading. If the
displayed pulse appears to be too high or too low,
or if your pulse is not displayed, lift your thumb off
the sensor and allow the display to reset. Press
down again on the sensor as described above.
On/Reset Button
The console is designed to help you get the most from
your workouts. As you exercise, you can watch your
progress around the LED “track” in the cener of the
console. The upper LCD display will show how many
calories you have burned, the number of laps you
have completed, your current speed, the elapsed time,
and the distance you have pedalled. The lower LCD
display will show your heart rate when the pulse
sensor is used. The modes of the two LCD displays
are described below.
Calories—This mode displays the approximate
number of calories you have burned.
Make sure that your thumb is positioned as shown,
and that you are applying the proper amount of pressure to the pulse sensor. Try the sensor several
times until you become familiar with it.
Laps—This mode displays the total number of
1/4-kilometer laps you have completed.
Speed—This mode displays your pedalling
speed, in kilometers per hour.
5. To reset the upper LCD display, press the on/reset
button.
Time—This mode displays the length of time
you have exercised.
6. To turn off the power, simply wait for about six
minutes. Note: The console has an “auto-off”
feature. If the pedals are not moved and the
console buttons are not pressed for six minutes,
the power will turn off automatically in order to
conserve the batteries.
Distance—This mode displays the total number
of kilometres you have pedalled during your
workout.
Pulse—This mode displays your heart rate
when the pulse sensor is used.
HOW TO OPERATE THE CONSOLE
1. To turn on the power, press the on/reset button or
simply begin pedalling. After two seconds, the
console will be ready for operation.
9
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
highest number is the recommended heart rate for
aerobic exercise.
To measure your heart rate, first exercise for at least
four minutes. Then, stop pedalling and measure your
heart rate using the pulse sensor on the console.
WARNING: Before beginning this or any exercise program, consult your physician. This is
especially important for persons over the age
of 35 or persons with pre-existing health
problems.
Burning Fat
To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest number in your training zone as you exercise.
The pulse monitor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse monitor is intended only
as an exercise aid in determining heart rate
trends in general.
EXERCISE INTENSITY
For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle number in your training zone as you exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching and light exercise. (See page 11.) A proper warmup increases your body temperature, heart rate, and
circulation in preparation for exercise.
Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
to the right of your age. The three numbers are your
“training zone.” The lowest number is the recommended heart rate for fat burning; the middle number is the
recommended heart rate for maximum fat burning; the
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
10
EXERCISE FREQUENCY
desired. Caution: Be sure to progress at your own
pace and avoid overdoing it. Incorrect or excessive
training may result in injury to your health.
To maintain or improve your condition, plan three workouts each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretch—never bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
11
MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the exercise cycle
regularly. Replace any worn parts immediately.
30
The exercise cycle can be cleaned with a soft, damp
cloth. Avoid spilling liquid on the console. Keep the
console out of direct sunlight or the display may be
damaged. Remove the batteries when storing the
exercise cycle.
50
29
17
50
HOW TO TIGHTEN THE CRANK
63
If the arms of the Crank (17) become loose, they
should be tightened in order to prevent excessive
wear. Loosen
the Crank Nut
(56) on the left
arm of the
Crank. Place
the end of a
58
standard
56
screwdriver in
one of the
slots in the
Slotted Crank
17
Nut (58).
Lightly tap the
screwdriver
with a hammer to turn the Slotted Crank Nut counterclockwise until the arms are no longer loose. Do not
overtighten the Slotted Crank Nut. When the
Slotted Crank Nut is properly tightened, retighten the
Crank Nut.
1
28
4
Next, remove the Seat Knob (29) and lift the Side
Shield Cover (30) off the Side Shields. Grasp both
Side Shields at the top and gently pull them apart.
Make sure that the arm of the Crank is in the position
shown in the drawing above. Carefully slide the Left
Side Shield forward off the arm of the Crank and
remove it.
Locate the Reed Switch (54). Turn the Crank (17) until
the Magnet (55) is aligned with the Reed Switch.
Loosen but do not remove the M4 x 16mm Screw (4).
Slide the Reed Switch slightly closer to or away from
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, see
assembly step 3 on page 6. In addition, make sure
that the console wire is connected to the reed switch
wire.
55
54
17
HOW TO ADJUST THE REED SWITCH
4
If the console does not display correct feedback, the
reed switch should be adjusted. In order to adjust the
reed switch, the Left Side Shield (1) must be removed
(refer to the drawing at the top of this page). Using an
adjustable wrench, turn the Left Pedal (28) clockwise
and remove it from the Crank (17). Remove the two
M4 x 16mm Screws (4) and the three M4 x 38mm
(50) Screws from the Left Side Shield.
the Magnet. Retighten the Screw. Turn the Crank for a
moment. Repeat until the console displays correct
feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and pedal.
12
HOW TO ADJUST THE RESISTANCE STRAP
side shield. Next, use an adjustable wrench to turn
the right pedal counterclockwise and remove it.
Remove the right side shield. Press down on the centre of the Belt (16) between the front and rear sprockets. There should be from 1/4” to 3/4” of vertical
movement in the centre of the Belt.
If there is not enough pedalling resistance when the
resistance knob is turned to the highest setting, the
Resistance Strap (47) may need to be adjusted. To
adjust the Resistance Strap, the left side shield must
first be removed. Refer to the instructions at the left
and remove the left side shield.
If the Belt (16)
is properly
adjusted, reat16
tach the side
34
shields and ped39
als. If the Belt
needs to be
adjusted, loosen
the M10
37
Washer Nut
(34) on each
side of the
Flywheel (39). To tighten the Belt, turn the two M6
Nuts (37) clockwise; to loosen the belt, turn the Nuts
counterclockwise. Make sure that the Flywheel is
straight and tighten the M10 Washer Nuts (34). Reattach
the side shields and pedals.
Next, turn the
resistance knob
to the lowest setting. Locate and
17
open the Strap
Buckle (46). Grip
47
the end of the
Resistance Strap
(47) and pull it up
to remove any
46
slack. Whilst
holding the end
of the Resistance Strap, fully close the Strap Buckle.
Turn the Crank (17) for a moment to make sure that
there is not too much resistance. When the Resistance Strap is properly adjusted, reattach the left side
shield and pedal.
HOW TO ADJUST THE PEDAL STRAPS
HOW TO ADJUST THE BELT
To adjust the
Left Pedal Strap
(64), first pull
the end of the
45
28
Pedal Strap off
the adjustment
tab on the
Pedal (28).
Align a different
hole in the
Adjustment Tab
Pedal Strap
with the adjustment tab. Press the Pedal Strap onto the adjustment
tab. Do the same to adjust the Right Pedal Strap (not
shown).
The exercise
cycle features a
precision belt
16
that must be
kept properly
adjusted. If the
belt causes
excessive noise
or slips as you
pedal, the belt
should be
checked. To do
this, the left side shield must first be removed. Refer
to the instructions on page 12 and remove the left
13
PART LIST—Model No. WLCCEX69871
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
1
1
2
11
1
2
1
5
4
1
1
1
1
1
1
1
1
1
1
1
7
1
1
2
2
2
2
1
1
1
5
1
2
2
2
Description
Key No. Qty.
Left Side Shield
Right Side Shield
Double Tree Fastener
M4 x 16mm Screw
Handlebar
Foam Grip
Console
M10 x 25mm Button Screw
M8 x 80mm Carriage Bolt
Resistance Knob
Resistance Cable
Knob Housing
Right Pedal
Handlebar Post
Frame
Belt
Crank/Pulley
M4 x 16mm Flat Head Screw
Seat
Seat Post
M8 Nylon Locknut
25.4mm x 63.5mm Endcap
Seat Post Bushing
Wheel Hub
Wheel
Wheel Spacer
M6 x 16mm Self-tapping Screw
Left Pedal
Seat Knob
Side Shield Cover
M10 Split Washer
Small Spring
Handlebar Endcap
M8 Washer Nut
Adjustment Bolt
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
#
#
#
2
2
1
1
2
1
1
2
2
1
1
1
2
1
3
1
1
4
1
1
2
1
1
1
1
1
R0500A
Description
Adjustment Bracket
M6 Nut
Flywheel Axle
Flywheel
Crank Bearing Assembly
Cable Clamp Assembly
Right Pedal Strap
Flywheel Bearing
M10 Washer
Left Pedal Strap
Strap Buckle
Resistance Strap
Stabilizer Endcap
Large Spring
M4 x 38mm Screw
Front Stabilizer
Rear Stabilizer
M8 Split Washer
Reed Switch/Wire
Magnet
Crank Nut
Flywheel Spacer
Reed Switch Clamp
User’s Manual
Console Decal Sheet
Allen Wrench
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
14
EXPLODED DRAWING—Model No. WLCCEX69871
R0500A
30
3
33
6
50
50
7
2
3
1
10
5
11
31
19
12
8
4
31
27
26
14
53
25
53
24
21
4
21
16
54
20
42
17
29
8
8
31
31
4
13
22
23
15
21
51
9
40
58
4
21
32
41
49
41
18
55
47
46
34
44
4
54
27
35
26
4
24
34
25
45
40
28
21
35
38
36
37
43
39
36
37
44 57
4
43
21
48
52
4
48
17
56
9
15
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday–
Friday, 8:00 am–6:30 pm EST (excluding holidays). To help us assist you, please be prepared to give the following information when calling:
• The MODEL NUMBER of the product (WLCCEX69871).
• The NAME of the product (WESLO PURSUIT® 895i).
• The SERIAL NUMBER of the product (see the front cover of this manual).
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).
16
CUSTOMER RECORD
Model No.:
Serial No.:
Retailer Name:
Purchase Date:
Retailer Address:
PLACE
STAMP
HERE
ICON of Canada Inc.
900 de l’Industrie
St-Jérôme, Québec
Canada, J7Y 4B8
17
LIMITED WARRANTY
ICON OF/DU CANADA INC., (ICON), warrants this product to be free from defects in workmanship and material,
under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing,
at ICON's option, the product at one of its authorized service centers. All products for which warranty claim is made
must be received by ICON at one of its authorized service centers with all freight and other transportation charges
prepaid, accompanied by sufficient proof of purchase. All returns must be pre-authorized by ICON. This warranty
does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, to products used
for commercial or rental purposes, or to products used as store display models. No other warranty beyond that
specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with
the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some provinces do not allow the exclusion or limitation of incidental or consequential damages.
Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all
other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its
scope and duration to the terms set forth herein. Some provinces do not allow limitations on how long an implied
warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from province to province or
so specified by the retailer of your equipment.
ICON OF/DU CANADA, 900 de l’Industrie, St. Jerôme, QC J7Y 4B8
™
®
of/du Canada Inc.
PRODUCT WARRANTY REGISTRATION
IMPORTANT: MAIL WITHIN 14 DAYS OF PURCHASE
NAME:
PHONE:
ADDRESS:
POSTCODE:
COUNTY:
MODEL NO.
SERIAL NO.
PURCHASE DATE:
RETAILER ADDRESS:
RETAILER NAME:
1) Primary user(s) of product:
Male
Female
Family
2) Age of primary user:
0–24
25–34
55–64
65 and over
35–44
45–54
3) Annual household income:
0–9,999
15,000–19,999
10,000–14,999
20,000+
4) How many times a week do you exercise?
Less than 3 times 3 times or more
8) Did you consider purchasing fitness equipment from another
manufacturer?
No
Yes
What other Manufacturer?
9) Based on your impression of what you have purchased,
would you buy another ICON product?
Yes
No
No Opinion
If not, what other brand name equipment would you purchase?
10) What other type of exercise equipment do you own?
Bicycle
Exercise Cycle Treadmill
Home Gym
Weight Bench Stepper
Cardio Glide
Other
5) Have you ever purchased a ICON product before?
Yes
No
11) Which type of magazines do you read regularly?
Sports
Fitness
Motoring
Business
Computer
General
6) Where did you first see or hear about ICON products?
Magazine
Friend/relative
Newspaper Ad
Store
Other
7) What was the primary reason for purchasing this ICON product?
Store Employee
Television Ads Colour
Electronic Features Magazine Ads Price
Product Design
Product Innovation
Other Features
12) Do you wish to be sent further bulletins about ICON products?
Yes
No
THANK YOU FOR YOUR TIME
© 1999 ICON of Canada, Inc. Printed in China
WESLO® is a registered trademark of ICON Health & Fitness, Inc.
Part No. 166098 R0500A
Printed in China © 2000 ICON Health & Fitness, Inc.
18