Download Miele T 1520 VENT ED DRYER - OPERATING Operating instructions

Problem solving guide
The interior drum light fails to function: The bulb may be defective.
To open the door in the event of a
power failure
Replace it as follows:
Turn off the machine or disconnect
it from the power supply.
Open the door.
Pull forward on the un-hinged side of
the door.
Unscrew the plastic bulb cover located inside the drum and above the
door (see illustration).
The light bulb must not exceed the
maximum wattage quoted on the
data plate.
Replace the bulb and the plastic
cover.
The cover must be correctly installed
and tightened, otherwise moisture may
seep in and cause the socket to corrode.
This is a temperature-resistant bulb
and should only be ordered from your
Miele Service Dept.
17