Download Siemens OSM User`s guide

•
Support for disk partitioning on both Hard Disk Drives (HDDs) and Solid State Disks (SDDs),
including:
◦
The Start Disk, Start Volume, Stop Disk, and Get Logical Disk(s) actions on the SAS Disk
object have been modified to work with partitioned disks.
◦
A Partition Number attribute has been added to the CLIM-Attached Disk object to indicate
the partition number.
•
For G6 CLIMs, a new subcomponent InfiniBand HCA Card object.
•
Support for collecting CLIM logs onto a NonStop system, through two new actions on the
CLIMs object: Collect CLIM Logs and Set Location for CLIM Log Collection.
•
Support for enhanced BladeCluster Solution options.
At H06.22/J06.11, OSM Service Connection (T0682 H02 ACJ) added:
•
Support for Integrity NonStop NB54000 BladeSystems.
•
The ability to control access to certain OSM Service Connection actions through the Access
Control List feature.
•
The option of having Up-rev firmware on CLIM and SAS Disk Enclosure components flagged
as a problem attribute that is propagated up to parent objects in the OSM Service Connection.
For information on how configure this option in your OSMCONF file, see the OSM
Configuration Guide.
•
The option of configuring OSM to monitor system devices (storage routers, UPSs, maintenance
switches, Onboard Administrators, or CLIMs) located outside of the dedicated service LAN.
For information on how configure this feature in your OSMCONF file, see the OSM
Configuration Guide.
•
A Start Volume action has been added to the SAS Disk object.
•
A Set LED State action has been added to the CLIM-Attached Disk object.
At H06.21/J06.10, OSM Service Connection (T0682 H02 ACE) added support for:
•
G6 CLIMs, including the display of two new subcomponent objects in the OSM Service
Connection, Motherboard and Smart Array Controller, as well as some changes to these
existing CLIM subcomponents:
◦
DIMM
◦
Hard Disk
◦
PCI Riser
◦
SAS Card
•
You can now specify an optional process priority for the Validate Checksum and Clear Data
actions that are available under supported disk types.
•
New Display Diagnostic Status Errors action on the Enclosure object.
•
New Compare HSS Firmware Versions action on the System object.
35