Download Brodit 213471 car kit

19 April, 2012, www.brodit.com, © 2012 Brodit AB
Product 213471
213471 Mounting bracket
Center mount, Extra strength mounting platform
Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or
attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter
screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick
and easy and will not damage the interior. Detailed installation instructions included.
EAN: 7320282134716
Item no 213471 fits:
Peugeot 508 11-12 (For all countries)
1 (2)
INSTALLATION INSTRUCTIONS
1.
2.
3.
4.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Hook the two angled upper parts of the ProClip into the gap between the frame surrounding the air vent and
the dashboard. Press downward on top of the upper parts so all of the angled edges go all the way into the gap.
2. Hook the angled edge on the lower part of the ProClip under the dashboard overhang. Hold the two upper
parts in the gap and in the same time press forward on the face plate so the ProClip contracts and is firmly in
place.
3. Tighten gently the large nuts on top of the ProClip so the ProClip contracts and is firmly in place. Use an Allen
key to tighten the small nuts and lock the ProClip into the desired position.
4. The ProClip is in place.
2 (2)