Download Network IR Weather

Network IR Weather-Proof Camera
User Manual
Please read this instruction carefully for correct use of the product and preserve it for
reference purposes
Cautions










Before operation, we strongly advise users to read this manual and keep it properly for
using later.
Please use the specified power supply to connect.
Avoid from in correct operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate it incase temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove., etc.
This is product instructions not quality warranty. We may reserve the rights of amending
the typographical errors, inconsistencies with the latest version, software upgrades and
product improvements, interpretation and modification. These changes will be published
in the latest version without special notification.
When this product is in use, the relevant contents of Microsoft, Apple and Google will
be involved in. The pictures and screenshots in this manual are only used to explain the
usage of our product. The ownerships of trademarks, logos and other intellectual
properties related to Microsoft, Apple and Google belong to the above-mentioned
companies.
Contents
1
2
3
4
5
Introduction .................................................................................................. 1
Installation .................................................................................................... 3
IE Connection............................................................................................... 5
3.1.1 Access through IP-Tool ............................................................. 5
3.1.2 Directly access through IE......................................................... 7
Remote Preview ......................................................................................... 10
4.1 Remote Preview ................................................................................. 10
4.2 Playback ............................................................................................. 11
4.3 Snap .................................................................................................... 11
Remote Configuration ................................................................................ 13
5.1 System Configuration......................................................................... 13
5.1.1 Basic Information .................................................................... 13
5.1.2 Date & Time Configuration..................................................... 13
5.1.3 SD Card ................................................................................... 14
5.2 Video Configuration ........................................................................... 15
5.2.1 Camera Configuration ............................................................. 15
5.2.2 Video Stream ........................................................................... 15
5.2.3 Time Stamp ............................................................................. 16
5.3 PTZ Configuration ............................................................................. 16
5.3.1 Protocol ................................................................................... 16
5.3.2 Preset Configuration ................................................................ 16
5.3.3 Cruise Configuration ............................................................... 17
5.4 Alarm Configuration .......................................................................... 18
5.4.1 Motion Detection Area ............................................................ 18
5.4.2 Motion Detection Trigger ........................................................ 19
5.4.3 Motion Detection Schedule ..................................................... 19
5.4.4 Alarm Input Trigger ................................................................ 20
5.4.5 Alarm Input Schedule .............................................................. 21
5.4.6 Alarm Out ................................................................................ 21
5.5 Network Configuration ...................................................................... 22
5.5.1 Port .......................................................................................... 22
5.5.2 Wired ....................................................................................... 22
5.5.3 Server Configuration ............................................................... 23
5.5.4 IP Notify .................................................................................. 23
5.5.5 DDNS Configuration ............................................................... 23
5.5.6 RTSP ....................................................................................... 26
5.5.7 UPNP ....................................................................................... 26
5.5.8 Mail Setting ............................................................................. 27
5.5.9 FTP .......................................................................................... 28
5.6 Advanced Configuration .................................................................... 28
5.6.1 User Configuration .................................................................. 28
5.6.2 Onvif Configuration ................................................................ 30
5.6.3 Security Configuration ............................................................ 30
5.6.4 Configure Backup & Restore .................................................. 31
5.6.5 Reboot Device ......................................................................... 31
5.6.6 Upgrade ................................................................................... 32
6
Video Search .............................................................................................. 33
7
Mobile Surveillance ................................................................................... 35
7.1 Network Configuration ...................................................................... 35
7.2 By Phones with Windows Mobile OS ................................................ 35
7.3 By Phones with iPhone OS ................................................................ 39
7.4 By Phones with Android OS .............................................................. 49
7.5 By Phones with Blackberry OS .......................................................... 53
8
IP-Tool........................................................................................................ 55
9
Q & A ......................................................................................................... 58
10 Specification ............................................................................................... 60
C
Ch
haap
ptteerr 11 IIn
nttrro
od
du
uccttiio
on
n
1 Introduction
1.1 Overview
This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It
adopts state of the art video processing chips. It utilizes most advanced technologies, such as
video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to
ensure this system more stable and reliable. This unit consists of two parts: the IP-CAM
device and central management software (short for CMS). The CMS centralizes all devices
together via internet or LAN and establishes a sound surveillance system to realize unified
management and remote operation to all devices in one network.
This product is widely used in banks, telecommunication systems, electricity power
departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an ideal
choice for surveillance sites with middle or high risks..
1.2 Package
The pictures below are only for reference. Only part of our products can adjust focus. Please
make the object as the standard.
IP-CAMERA
Quick Start Guide
CD
Accessories
IP-CAMERA
Quick Start Guide
Description
The device without Lens
The Brief instructions of the product
CD
Screwdriver
CD-ROM with software and manual
A tool to adjust the stand
1.3 Interfaces and Parts
1
2
Screwdriver
Zoom：Turn the screw to zoom in/out.
Focus：Turn the screw to adjust the image definition.
IP-CAMERA User Manual - 1
C
Ch
haap
ptteerr 11 IIn
nttrro
od
du
uccttiio
on
n
Video out: connect to monitor
HP: connect to headphone
MIC: connect to MIC
DC12V: connect to power supply
LAN: network port (support PoE power supply).
Alarm NO/COM: alarm out; connect to alarm output device
Alarm GND: connect to external sensor together with alarm in line
Alarm In: connect to external alarm input device, like sensor
RS 485: connect to speed dome and keyboard; D+ positive pole; D- negative
pole
GND: grounding line
Default: intersect with GND line to reset
IP-CAMERA User Manual - 2
C
Ch
haap
ptteerr 22 IIn
nssttaallllaattiio
on
n
2 Installation
2.1 Install IP-CAM to Ethernet network
The connection of digital video server is show below.
Monitor
Headphone
MIC
Adapter
Modem
Hub
WAN
LAN
Control
Center
Alarm
Sensor
Keyboard
PTZ
User can connect the PC and IP-CAMERA in accordance with above picture. Before
connecting, please connect external devices, and then connect the power.
The connection step as shown as below:
Step 1: Connect IP-CAM firstly.
Step 2: Internet line connect to Internet transfer equipment or devices
Step 3: Connect power cable to a power outlet
2.2
CMS Installation
1） Find CMS software from CD and then double click “Setup.exe” file to pop up
installation wizard.
2） Click “Next” button and then click “Browse” button to set the installation path.
IP-CAMERA User Manual - 3
C
Ch
haap
ptteerr 22 IIn
nssttaallllaattiio
on
n
3） Click “Next” button to select files as shown in the figure on the left.
4） Click “Next” button to start installing as shown in the figure on the right.
5） The installation is completed as shown below.
6） Click “Finish” to complete installation。After that, two icons
will
display on the desktop
Double click CMS icon to run the software. The default user name is “system” and the default
password is “123456”.
Double click IP-Tool icon to start IP-Tool.
IP-CAMERA User Manual - 4
C
Ch
haap
ptteerr 33 IIEE C
Co
on
nn
neeccttiio
on
n
3 IE Connection
User can connect IP-CAM through LAN or WAN. Here only take IE browser (6.0) for
example. The details are as follows.
3.1 LAN
In LAN, there are two ways to access IP-CAM：① Access through IP-Tool；② Directly
Access through IE Browser.
3.1.1
Access through IP-Tool
Step 1: Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed
in the PC from the CD.
Step 2: Use IP-Tool to modify the network of IP-Cam. Then, double click the
the desktop to run this software as shown below:
icon on
After starting IP-Tool and clicking the IP-Cam in the list, user can check the information of
IP-Cam. If user cannot confirm which one is himself, please shut off the electricity of the
IP-Cam and then power on it. When shutting off the power, the device information will
disappear. When powering on, the device information will emerge. Well, this device is the
used device. Right click the device information and select “network setup”. Then the network
setup window will pop up as shown below:
IP-CAMERA User Manual - 5
C
Ch
haap
ptteerr 33 IIEE C
Co
on
nn
neeccttiio
on
n
For example, the network segment of this computer is 192.168.13.57. So, please modify the
IP address, Subnet Mask, Gateway of IP-Cam which must be in the same network segment
with the computer. After modifying, please input the user name and password and then click
“OK” button to save the setting.
Note: The default user name is: admin. The default password is: 123456.
The new IP address of this device will display as follows after modification.
Step 3: Use the IP-Tool to login the IP-Cam.
Right-click the IP address and select “browse with IE”. Then the system will pop up the IE
browser to connect IP-Cam as shown below. IE browser will auto download the Active X
control. After finishing the installation of the Active X control, a login window will pop up.
IP-CAMERA User Manual - 6
C
Ch
haap
ptteerr 33 IIEE C
Co
on
nn
neeccttiio
on
n
Input User name and password and then click “OK” button to login.
Note: User also can use the modified IP address of the IP-Cam. Input the IP address in the IE
browser bar and then click “Enter” to access IP-Cam. The default user name is admin. The
default password is 123456.
3.1.2
Directly access through IE
The network service is default as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
When use the IP-CAM for the first time, please connect the device with the above default
settings.
Step 1: Manual setup the IP address of the PC, the network segment should be as same as the
default settings of IP-CAM. Right click “My Network Places” icon on the desktopselect
“Properties” as shown in the left figure. Right click “Local Area Connection” at the popup
window, and then select “Property” as shown in the right figure.
Select “Internet Protocol (TCP/IP)” in the “General” tabsclick “Properties”Manual input
network address information of the PC in the pop up window. Refer to the following figure:
IP-CAMERA User Manual - 7
C
Ch
haap
ptteerr 33 IIEE C
Co
on
nn
neeccttiio
on
n
Step 2: Open the IE Browser and input the default address of IP-CAM and confirm. Then the
IE browser will download Active X control automatically.
Step 3: After downloading Active X control, the login dialog box will pop up as below:
Step 4: Input user name and password in the login dialog box and click “OK” button to enter
into the live interface. You can manage and setup the IP-CAM, such as change IP address etc.
3.2 WAN
Access through router or virtual server
Step1: Connecting according to above steps in LAN; Enter into System
ConfigurationNetwork configurationBasic configuration to setup the port number as
shown in the picture on the left hand.
Step 2: Enter into System ConfigurationNetwork configurationIP configuration to
change IP address as shown in the picture on the right hand.
Port Setup
IP Setup
IP-CAMERA User Manual - 8
C
Ch
haap
ptteerr 33 IIEE C
Co
on
nn
neeccttiio
on
n
Step 3: Enter into the router‟s management interface through IE browser; remap the IP
address and port of IP-CAM in the “virtual server”. The name depends on the router.
IP Remap
Step 4: Open the IE browser and input its WAN IP and http port to access.
IP-CAMERA User Manual - 9
C
Ch
haap
ptteerr 44 R
Reem
mo
ottee P
Prreevviieew
w
4 Remote Preview
4.1 Remote Preview
After you log in, you will see the following window.
The descriptions of the icon on the remote preview interface:
Icon
Description
Sensor alarm indicator icon
Icon
Description
Full screen
Motion alarm indicator icon
Fix size
Actual size
Start/Stop record
Playback
Snap
Zoom in
Talk
Zoom out
Open/close audio
Right click mouse to appear a pull-down list as shown in the above image:
Stream: 1080P, 720P, VGA, QVGA.
Turn off the live: Click this item will close present live preview.
Enable audio: Enable remote audio transmission.
Full screen: The live preview picture will full-screen display. Double click or click right
mouse to return to the previous interface.
Online user: Display user‟s list connect to the device.
System information: Display the device information: device name, firmware version,
software build date, kernel version and hardware version.
Click PTZ extended button to unfold PTZ control panel.
The descriptions of the control panel are as follows:
IP-CAMERA User Manual - 10
C
Ch
haap
ptteerr 44 R
Reem
mo
ottee P
Prreevviieew
w
Button
Description
to rotate the dome upwards；
to rotate the dome towards left;
right；
to rotate the dome downwards;
to rotate the dome towards
to stop rotating the dome.
Drag the scroll bar to adjust rotating speed of the dome.
Focus button. Click
button to have long focus and click
have short focus so that you can adjust the image clearly.
Zoom button. Click
the image.
to zoom in the image; click
to zoom out
Iris button. Click
to increase light of the dome; click
decrease light of the dome.
4.2 Playback
Click
icon to see the following window:
After selecting the record date, the record files will be displayed in the record file list box.
User can double click a certain record file to playback or check a certain file. Then click Play
button to do playback. User can do relating operation according to some buttons in the
playback interface.
4.3 Snap
Select the picture number, and then click “Snap”
icon as shown below:
IP-CAMERA User Manual - 11
to
to
C
Ch
haap
ptteerr 44 R
Reem
mo
ottee P
Prreevviieew
w
User can snap multiple pictures. Select the picture number from Frame pull down list box,
such as 2, and check “Title” and “Time” to show capture title and time on the snap pictures
simultaneously.
Click “Browse” to set saving path; Click “Save” to save pictures to HDD on the computer;
Click “Printer setup” to set the printer and print the snap pictures; drag the scroll bar to
view all snapped pictures.
IP-CAMERA User Manual - 12
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5 Remote Configuration
Functions of remote configurations include: System Configuration, Video Configuration, PTZ
Configuration, Alarm Configuration, Network Configuration and Advanced Configuration.
You should firstly select the menu on the left, and then setup the relative parameters. When
one user configures parameters of a certain device, other users can not setup this device.
5.1 System Configuration
The “System configuration” includes three submenus: Basic Information, Date & Time and
SD card.
5.1.1 Basic Information
In the “Basic Information interface, user can setup the device name and also can check the
relative information of the server
Setting steps:
1. Clicking the "Config" icon will appear the menu list.
2. Clicking the “Basic Information "will pop up a window as shown below:
Parameter
Meaning
Software version
The software of the device
Software build date
The software build date of the device
Kernel version
The kernel version of the device
Hardware version
The hardware version of the device
Mac Address
MAC address of device
Maximum number of user
Support max 6 users to access
Device name
Name of the device.
3. Input the name of the device in the "Device name" text box.
4. Press the "Save" button to save the settings.
5.1.2 Date & Time Configuration
Setting steps:
1. Enter into "System Configuration" “Date & Time”.
IP-CAMERA User Manual - 13
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
2. Select “Modify Time ", user can self-define time. Choose the right "Time Zone" according
to user‟s location.
3. User can also enable DST and set DST mode and time.
4. User can setup time by select the “Synchronize with NTP Server”.
5. Press the "Save" button to save the settings.
5.1.3 SD Card
Setting steps:
1. Enter into "System Configuration" “SD Card” as shown below:
Click “Format SD card” to format SD card.
Click "Eject card" to stop writing data to SD card. Then the SD card can be ejected safely.

Note: Using of SD card function should be coordinated with Motion alarm.
When alarm is triggered, the system will automatically snap picture and save
the picture into SD card.
IP-CAMERA User Manual - 14
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.2 Video Configuration
Camera Configuration includes three submenus: Camera Configuration, Video Stream and
Time Stamp.
5.2.1 Camera Configuration
Setting steps:
1. Enter into "Video Configuration " "Camera" interface as shown below:
2. Adjust Brightness, Contrast, Hue and saturation of the picture.
3. Select white balance mode.
4. Sharpen, denoise and frequency are adjustable.
5. Enable auto iris, the image mirror and image overturn function.
6. Press the "Save" button to save the settings.
5.2.2 Video Stream
1. Enter into "Video configuration" "Video Stream" to see a interface shown as below:
2. Select the resolution of the single frame image at the "Resolution" pull down list.
3. Select the quantity of video per second at the "Frame rate" pull down list.
4. Select the data stream type at the "Bit rate type" pull down list.
5. Set the video quality at the "Video quality" pull down list.
6. Choose the alarm picture size.
7. Press the "Save" button to save the settings.
IP-CAMERA User Manual - 15
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.2.3 Time Stamp
Enter into "Video configuration""Time Stamp" to display the interface as shown below:
Here you can set date format and the position of the time stamp shown in the live image.
5.3 PTZ Configuration
PTZ Configuration includes three submenus: Protocol, Preset and Cruise.
5.3.1 Protocol
1. Enter into "PTZ Configuration""Protocol" interface as shown below:
2. Tick off “Enable/Disable PTZ Config”, and then reboot IE client side, the PTZ control
panel will be displayed on the live interface.
3. Select the protocol of the PTZ device at the "Protocol" pull down list.
4. Input address of the PTZ in the "Address" textbox.
5. Select baud rate of the PTZ in the "Baud rate" pull down list.
For the settings of protocol, address and baud rate please refer to the user manual of the
PTZ setting.
5.3.2 Preset Configuration
1. Enter into "PTZ Configuration""Preset" to see a interface as shown below:
2. Input the preset number and set its position by controlling PTZ control panel and then click
Add button to add preset point into the Available position list.
3. Select the preset in the pull down list of the Available position and click Go to button to
move the dome to this preset point; click Delete button to delete checked preset point.
4. After finishing setting, click Save button to save the settings
IP-CAMERA User Manual - 16
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Button
Meanings
to rotate the dome upwards;
to rotate the dome towards left;
to rotate the dome downwards;
to rotate the dome towards right;
to stop rotating the dome.
Focus button. Click
button to have long focus; click
button
to have short focus.
Zoom button. Click
button to zoom in the locale picture ; click
button to zoom out the locale picture.
Iris button. Click
button to increase light of the dome; click
button to decrease the light of the dome.
Drag the scroll bar to adjust rotating speed of the dome.
5.3.3 Cruise Configuration
Enter into "PTZ Configuration""Cruise" to display a interface as shown below:
Click “Add” button to add cruise.
Choose a cruise and click “Modify” button to pop up a window as below:
IP-CAMERA User Manual - 17
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Click “Add Preset” button to pop up a window. You can add the preset there.
Click “Preview” button to check the related information of this cruise and click “Delete”
button to delete this cruise.
4. Press the "Save" button to save the settings.
5.4 Alarm Configuration
Alarm configuration includes six submenus: Motion Detection Area, Motion Detection
Trigger, Motion Detection Schedule, Alarm Input Trigger, Alarm Input Schedule and Alarm
Out.
5.4.1 Motion Detection Area
1. Enter into “Alarm configuration""Motion Detection Area" to see a interface shown as
below:
2. Move the "Sensitivity" scroll bar to setup the motion trace sensitivity.
3. Check the "Add”, press the "Ctrl" button and move mouse to select the motion detection
area; Select “Erase” and move the mouse to clear all motion detection area.
4. Press the "Save" button to save the settings.
IP-CAMERA User Manual - 18
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.4.2 Motion Detection Trigger
1. Enter into “Alarm Configuration" "Motion Detection Trigger" to display a interface as
below:
2. Check "Enable alarm" check box. Then motion based alarm is activated.
3. Set alarm holding time.
4. Set alarm trigger options.
Alarm Out: If selected, this would trigger the external relay output on detecting a motion
based alarm.
Trigger Snap: If selected, the system will snap images on an alarm and save them in SD card.
Trigger Email: If the email and attach picture checkbox is checked (Email address shall be
set first in the Mail config interface), the triggered snap pictures and event will be sent into
those address.
Trigger FTP: If “Uploading picture” is checked, the triggered snap pictures will be sent into
FTP server address. Please refer to FTP configuration chapter for more details.
5. Press the "Save" button to save the settings.
5.4.3 Motion Detection Schedule
A window will show as below by entering into “Alarm configuration" "Motion Detection
schedule" menu.
Week schedule
User could set the alarm time from Monday to Sunday for alarm everyday in one week.
Note: The lengthwise means one day of a week; the rank means 24 hours of a day. Mouse
clicks on the pane to set the alarm hours. Green means selected area. Blank means unselected
area.
2."Add": add the schedule for a special day.
3."Erase": delete holiday schedule
IP-CAMERA User Manual - 19
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Day schedule
User could set alarm time for alarm in some time of special day, such as holiday.
1. Select a date at the "Date" pull down list, press "Add" button to add that date to the list box
on the right side and then move the scroll bar to set the schedule of that day.
2. Select a date in the list box on the right side, and press "Erase" to remove the schedule on
that day.
Press the "Save" button to save the settings.
Holiday schedule is prior to Week schedule.
5.4.4 Alarm Input Trigger
1. Enter “Alarm Configuration""Alarm Input Trigger" to see a screen as shown below:
2. Select the sensor at the "Sensor" pull down list and set the sensor name and alarm type: NO
and NC.
3. Enable alarm and select alarm holding time.
4. Set alarm trigger options. The setting steps are the same with that of motion detection
IP-CAMERA User Manual - 20
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
trigger. Please refer to motion detection trigger chapter for details.
5. Apply settings to all by clicking “Copy” button, which can quickly set the same settings for
all sensors.
5.4.5 Alarm Input Schedule
Enter into “Alarm Configuration"“Alarm Input Schedule” as shown below:
1. Select the sensor which needs to setup the alarm parameter at the "Sensor" pull down list
2. The following setup steps are similar to Motion Detection Schedule‟s. Please refer to
Motion Detection Schedule chapter for more details
5.4.6 Alarm Out
1. Enter into “Alarm configuration""Alarm output" as shown below:
2. Select alarm holding time and alarm name at the "Alarm out” and “Alarm holding time”
pull down list box respectively.
3. Press the "Save" button to save the settings
IP-CAMERA User Manual - 21
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.5 Network Configuration
Network configuration includes nine submenus: Port, Wired, Server Configuration, IP Notify,
DDNS Config, RTSP, UPNP, Mail Setting and FTP.
5.5.1 Port
1. Enter into "Network config""Port" to see the interface as shown below:
2. Input port number for IE access in the "HTTP Port" textbox.
3. Input the port number for audio & video transmission in the "Data Port" textbox.
5.5.2 Wired
1. Enter into "Network Configuration""Wired" to see a tab shown below:
2. There are two Options for setup IP: obtain an IP address auto by DHCP protocol and use
the following IP address, user can choose one of options for requirements.
3. Use the following IP address: display the IP address, subnet mask, gateway and DNS of the
device.
4. PPPOE: User needs to manual input the user name and password for dial-up internet.
Firstly, user needs to login IE clients, then enter into user name and password of PPPoE, save
the setting and exit. Secondly, setup IP address change notice. Thirdly, connect with Modem,
then the device will dial-up internet automatically.
6. Press the "Save" button to save the settings.
IP-CAMERA User Manual - 22
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.5.3 Server Configuration
Enter into “Network Configuration” “Server Config”.
1. Check “Do you want IP Camera to connect Server.
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then
enable the auto report in the ECMS/NVMS when adding a new device. Then input the
remaining information of the device in the ECMS/NVMS. After that, the system will auto
allot a device ID. Please check it in the ECMS/NVMS.
3. Input the above-mentioned server IP, server port and device ID in the responding boxes.
Click “save” button to save the settings.
5.5.4 IP Notify
1. Enter into “Network Configuration””IP Notify” to see a tab as below.
2. If the “Enable notifying change of IP” is selected, when the IP address of the device is
changed, a new IP address will be sent to the appointed mailbox automatically; If “FTP” is
selected, when the IP address of the device was changed, a new IP address will be sent to FTP
server.
5.5.5 DDNS Configuration
1. Enter into "Network Configuration""DDNS Configuration" tab as below:
IP-CAMERA User Manual - 23
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Note: The steps to band a domain name for video surveillance server are as follows. Firstly,
register a user name and a password to log on the website of service supplier, and then apply
for a domain name online for the server. After that, users can visit the server through inputting
the domain name at IE terminal.
2. Press the "Save" button to save the settings.
Please refer to the following table for parameters and instructions of DDNS configuration.
Parameter
Meaning
Address of the website which provided by domain name supplier. The
DDNS server
optional: www.dns2p.net ， www.88ip.net ，www.meibu.com ，
www.dyndns.com，www.no-ip.com，www.3322.org and mintdns type.
User name
Log in the website of domain name supplier
Password
Log in the website of domain name supplier
1. Apply the Domain Name (Take dns2p for example)
(1) Register in the Web
Register dialog box
Step 1: Fill in the blank of IE address with „www.dns2p.com‟.
Step 2: Click
to enter the website.
Step 3: Click "New User" in the right of homepage to register. For example: User ID is „abc‟,
IP-CAMERA User Manual - 24
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
and password is „123456‟. The register dialog display as above.
(2) Login
Step 1: Return to homepage after registering successfully.
Step 2: Click "Account Manager" on the right of homepage to login.
Step 3: Input the username and password with the information that you have registered.
Step 4: Click "Enter" key after filling in the textbox.
Log in
(3) Domain Setup
Step 1: Click "Domain Management" on the left to set the domain.
Domain setup
Step 2: Input the domain in the textbox. For example, you set „IP-CAMERA‟ as the domain.
Step 3: Click "Submit" button, the system will pop up a dialog box to show that the domain is
added successfully.
Note: Time of probationary period is one month. If user wants to use it continuatively after
one month, please Step 4: click "Buy Now" in the right of homepage to pay for it.
2. Setup in the IP-CAMERA
⑴ DOMAIN
Domain is set in „1. Apply the Domain Name‟. According to the example above, the domain
is „WWW. IP-CAMERA.dns2p.com‟.
⑵ USER ID
Username of registered which is set in „(1) Register in the Web‟. According to the example
above, user ID is „abc‟.
⑶ PASSWORD
Password is set in „(1) Register in the Web‟. According to the example above, password is
„123456‟.
Note: If the connection fails, press the "INFO" button. Now the system will display: „DDNS
NONE‟. Then you need to check network and information above and try again.
3. Application
Connect IP-CAMERA to the Network Client.
IP-CAMERA User Manual - 25
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Step 1: After popping up the login interface, fill in "Server" textbox with „*.dns2p.com‟ to
visit the Network Client of the IP-CAMERA. The domain set in „(3) Domain Setup‟.
According to the example above, fill in "Server" textbox with „IP-CAMERA.dns2p.com‟.
Step 2: Click "save" button to save the above setting.
5.5.6 RTSP
Enter into “Network Configuration” “RTSP” interface as shown below:
1. Select “Enable RTSP server.
2. RTSP Port: Access Port of the streaming media. The default number is 554.
3. RTSP Address: The RTSP addresses are inputted in the media player.
Application: This device supports VLC player. You can upload the VLC player in the related
website and then select “File””Open URL” from the tool bar of the player. You will see the
live image which is the same with that of playing through IE.
5.5.7 UPNP
Enter into “Network Configuration” “UPNP” interface as shown below:
Select “Enable UPNP” and then input friendly name.
Enable UPNP
Double-click the “My Network Places” icon on the desktop in PC and select “Show icons for
networked UPnP devices” in the “Network Tasks” list box. Then a information window will
pop up. Click “YES” button to see a “Windows Components Wizard” dialog box pop up as
shown below. Then press “Next” to continue. After finished the installation of configuring
components, the UPnP icons will display. Users can double-click certain icon to connect the
IP-CAMERA User Manual - 26
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
remote surveillance login interface through IE.
If “Show icons for networked UPnP devices” can‟t display in the “Network Tasks” list box,
please follow the below operation:

Click “Tools”-- “Folder options”

Check the “Show common tasks in folders” in the “Tasks” check box, UPnP icon will
display.
5.5.8 Mail Setting
Enter into “Network Configuration”  “Mail Setting” interface. Please refer to below picture.
1. From Email: sender‟s e-mail address
2. User name and password: sender‟s user name and password
3. Server address: SMTP name of sender
4.Select the secure connection type at the Secure Connection pull down list according to user‟
actual needs
5. Receival email address list: add email address into the list
6. Receival email address: receiver‟s e-mail address
7. After all parameters setup, user can click “Test your account settings”. If email sent
IP-CAMERA User Manual - 27
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
successful, a “Test Successful” window will pop up, if not, users can try other email addresses
or check the setting.

Note: If you change the static IP into PPPoE and select mailbox, there will be an
e-mail sent to users‟ mail box for notifying a new IP address.
5.5.9 FTP
Enter into Network ConfigurationFTP interface; please refer to below picture.
1. Add: Click Add button to input FTP server‟s server name, address, port number, user name,
password, and upload path, click OK to confirm the setting. Refer to the following picture:
Modify: Your can click this button to change some information of the FTP server
Delete: Select certain FTP account; Click this button to delete this account
Test: Select certain FTP account; Click this button to test its valid or not.
Please refer to the following table for parameters and instructions of FTP configuration.
Parameter
Meaning
Server name
The name of the FTP server
Server address
The address of the FTP server
Port
The port number of the FTP server
User name
The user name of the FTP server
Password
The password of the FTP server
Path
The save path for FTP files
5.6 Advanced Configuration
Advanced configuration includes five submenus: User Configuration, Onvif Configuration,
Security Configuration, Configure Backup & Restore, Reboot and Upgrade.
5.6.1 User Configuration
Enter into "User Configuration" interface. Refer to the following picture:
IP-CAMERA User Manual - 28
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
Add user:
1. Clicking "Add" button pops up "Add user" dialog box as shown below:
After binding physical address to the IP-CAM, you can access the device on this PC only. If
the MAC address was ““00:00:00:00:00:00” which means it can be connected to any
computers.
2. Input user name in "User Name" textbox (only letters).
3. Input characters in "Password" and "Confirm Password" textbox (letters or numbers).
4. Input the MAC address of the PC in "Binding MAC address" textbox.
5. Click “OK” button and then the new added user will display in the user list.
Modify user:
1. Select the user which needs to modify password and physical address in the user
configuration list box.
2. Clicking “Modify” button will pop up “Modify user” dialog box as shown below.
3. Input original password of this user in the “password” text box.
4. Input new password in the “New password” and “Confirmation” text box.
5. Input computer‟s physical address which is used to access the server in the “User PC MAC”
IP-CAMERA User Manual - 29
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
text box.
6. Click “OK” button to modify user‟s password and binding MAC address successfully.
Delete user:
1. Select the user which needs to delete in the user configuration list box.
2. Clicking “Delete” button will pop up a confirm dialog box. Then click “OK” to delete the
user.
Note: The default super administrator cannot be deleted.
Parameter
Meaning
User Name
User name to operate the logon client end
User Type
Type of users, normal user, advanced user and super administrator
Binding MAC address
The MAC addresses of user access the server which should setup
according to actual MAC address of server.
Password
Password to log in the client terminal
Confirm Password
Password to log in the client terminal
5.6.2 Onvif Configuration
This function is mainly used for connecting our device through other companies‟ monitoring
platform software, such as, Hikvision, Axxon, Milestone., etc.
5.6.3 Security Configuration
Enter into Advanced ConfigurationSecurity Configuration to see a tab shown below:
Check “Enable IP address” check box, select “Deny the following IP address”, input IP
address in the IP address list box and click “Add” button. Then this IP address will display in
the list box; the operation step of “Allow the following IP address” is the same with “Deny
the following IP address”
Select the IP address which needs to be deleted from the IP address list box and click “delete”
button to delete that IP address.
Check “Enable MAC address” check box, select “Deny the following IP address”, input MAC
address in the MAC address list box and click “Add” button. Then this MAC address will
display in the list box; the operation step of “Allow the following MAC address” is the same
with “Deny the following IP address”.
4. Select the MAC address which needs to be deleted from the MAC address list box and
IP-CAMERA User Manual - 30
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
click “delete” button to delete that MAC address.
5. Click "save" button to save the above setting.
5.6.4 Configure Backup & Restore
Enter into Advanced configurationConfigure Backup & Restore Interface.

Import & Export Configuration:
User can import or export the setting information from PC or to device.
1. Click “Browse” to select save path for import or export information on PC.
2. User can import or export all setting information to PC, but those two settings “user
configuration” and “network configuration” are exceptional.

Default Configuration
Click “Load default” button to restore all system settings to default status.
5.6.5 Reboot Device
Enter into Advanced configuration—Reboot device to see a interface as shown below:
Click “Reboot device” button to reboot the device.
IP-CAMERA User Manual - 31
C
Ch
haap
ptteerr 55 R
Reem
mo
ottee C
Co
on
nffiig
gu
urraattiio
on
n
5.6.6 Upgrade
Enter into Advanced Configuration—Upgrade interface.
1. Click “Browse” button to select the save path of the upgrade file
2. Click “Upgrade server firmware” button to start upgrading the application program
3. The device will restart automatically
4. After you successfully update the software, click “OK” button to close IE and then re-open
IE to connect IP-Cam.
Caution! You can‟t disconnect to PC or close the IP-CAM during upgrade.
IP-CAMERA User Manual - 32
C
Ch
haap
ptteerr 66 V
Viid
deeo
o SSeeaarrcch
h
6 Video Search
Click “picture” icon and search the images which saved in the SD card.
1. Select date in the “calendar”, check “motion detection” relatively and click “search” button.
Then the triggered snap pictures will be displayed in the list box.
2. Double click a filename or select a filename and then click “view” button in the list box to
view snap pictures.
Definitions of function buttons:
IP-CAMERA User Manual - 33
C
Ch
haap
ptteerr 66 V
Viid
deeo
o SSeeaarrcch
h
Item
1
Buttons
Explanations
Close: Select certain picture and click this button will close
this preview picture.
2
Close all: click this button will close all preview pictures
3
Save: click this button, select the save path of the picture
file on PC to save this preview picture
Save all: click this button, select the save path of the
picture files on PC to save all preview pictures
Fit size: click this button, the preview pictures will fit on
screen
Actual size: click this button to display the actual size of
the preview pictures (for user‟s requirements)
Zoom in: click this button to amplify the preview picture,
user can drag cursor to view request areas.
Zoom out: click this button to zoom out amplified preview
picture
Slider play: click this button to play preview pictures on
the mode of slider
4
5
6
7
8
9
10
Stop: click this button to stop slide show
11
Play speed: play rate of the slide show
IP-CAMERA User Manual - 34
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
7 Mobile Surveillance
This IP-CAM supports mobile surveillance by phones with Windows mobile, iPhone,
Android and Blackberry OS. Please check the operation system version of mobile before use;
and connect the IP-CAM to Internet.
7.1 Network Configuration

Access device via LAN
Step 1: Connect device via wireless router. Then checkmark DHCP both in router and device
to automatically acquire IP address or enter the IP address manually. Please enter Main
MenuInformationNetwork tab to see the IP address.
Step 2: Use WIFI function in your mobile phone to connect the wireless router.
Note: Make sure your phone network and device network are in the same network segment on
LAN.
Step 3: Add the IP address and port in the mobile phone surveillance client.

Access device via 3G network
Step 1: Set the device network. Please enter Main MenuSetupNetwork tab.
If you use PPPoE to connect device, please enable PPPoE and input username and
password received from you ISP in network tab. Then click “Apply”. You can enter Main
MenuInformationNetwork tab to see the IP address. If you want to utilize dynamic
domain name, please apply for a domain name in a DNS server supported by the device.
If you have a static WAN IP address, please enter Main MenuSetupNetwork tab to
input your IP address, gateway and port.
If you use LAN IP address, please enter Main MenuSetupNetwork tab to input
your IP address, gateway and port and then forward IP address and port number in virtual
server setup of the router or virtual server(If you has enabled the UPnP function in both the
device and router, you can skip this step). Port forwarding setting may be different in different
routers and servers. Please refer to the router‟s manual for details. After you forward your
LAN IP address and port, please check the WAN IP address in the router or server.
Step 2: Add the WAN IP address or domain name in mobile phone surveillance client.
7.2 By Phones with Windows Mobile OS
Step 1: Firstly activate the network access on mobile phone and then run “Internet Explorer”.
Input the server‟s address and the connection is built up shown as below:
Step 2: Click on the software name. A dialog box pops up:
IP-CAMERA User Manual - 35
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Step3: Run this software after installed, the login interface will popup
Enter server‟s IP address (or domain name), user name and password
Click “Remember server” to save the setting; click
button can quick input saved server
address, user name and password.
Work offline: view local record and snap.
Main interface
[Local play]
playback record file
[Image View]
View images
[History log]
Log record
[Favorites]
Server list
[Live View]
View the live
[Remote Set]
Not available
[Local Set]
[Information]
[Help]
Software setting
Device information view
Software help
Live view
IP-CAMERA User Manual - 36
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
PTZ, click to switch to the
Snap
second picture.
Record
Talk
Live audio
Full screen
Hide
Return
Upward rotates the PTZ
Downward rotates the PTZ
Leftward rotates the PTZ
Rightward rotates the PTZ
Stop rotating the PTZ
Zoom in/ Focus in/ Iris Add
Zoom out/ Focus out/ Iris Sub
Cruise
Preset
Select the preset point
Set the cruise line
Image view
Record playback
IP-CAMERA User Manual - 37
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Play/ pause
Stop
Full screen
Return to record file
interface
Click the record file to playback.
Server list
Configuration interface
Main parameters for mobile phone video configuration.
Select Sound Alarm: When Video Loss/Sensor/Motion happens ， sound alarm will be
triggered.
Select shake Alarm. When Video Loss/Sensor/Motion happens ， shake alarm will be
triggered.
Select backlight Alarm: When Video Loss/Sensor/Motion happens, backlight alarm will be
triggered.
IP-CAMERA User Manual - 38
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Reserved disk: Reserved SD Card disk space, when the disk space is less than setup value,
the video will be stopped.
Video clip size: Single video size. When the video size is greater than setup value, change
another video files
Recycle: continuous record.
Remove all former recorded files: delete all record files of the current device.
Buffering time: Buffering time of video display.
7.3 By Phones with iPhone OS

Install through Iphone
Step 1: Open App Store software as shown in the figure on the left.
Step2: Search “SuperLive Pro” and click “Free” button as shown in the figure on the right.
Step 3: Click “Install App” button as shown in the figure on the left.
Step 4: Input iTunes Store password and then click “OK”. The software will be installed
automatically.

Install Software through PC
Step 1: Install iTunes store in PC and then login.
IP-CAMERA User Manual - 39
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Step 2: Connect iPhone and PC.
Step 3: Search “SuperLivePro” and select it.
Step 4: Click “Download” button.
IP-CAMERA User Manual - 40
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Step 5: Input username and password.
Step 6: Synchronously apply SuperLivePro software to iPhone/iPad.

SuperLive-Pro Instruction
IP-CAMERA User Manual - 41
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Login
Step 1: Choose network. There are two network connection ways:
3G/3G +WIFI, well video quality. This network supports main stream in single channel
playing and sub stream. The real-time image will be displayed by using sub stream.
3G-, poor video quality contrast to the above mentioned network.
Step 2: Click Login. Then click
button to add device name, IP address, Port, username
and password.
Step 3: In the live interface, choose one channel and click to pop up the server list. Then
unfold the channel and choose a channel to display the live image.
Live
There are many buttons in live interface, such as, screen mode, favorite channel, snap, record,
open/close audio, talk, PTZ., etc.
：Image view button. The pictures snapped in the live will be checked by clicking this
button. You will view these pictures in this interface.
：Playback button. Click this button to enter into playback interface.
：Settings button. Click this button to set local configuration (Some can also support
remote configuration).
IP-CAMERA User Manual - 42
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
：Information button. Click this button to check lots of information including local
information, device information, network information, etc.
：Server list edition button. Click this button to add server list.
：Log off button. Click this button to return to the login interface.
：Screen mode button. You can choose 1，4，6，8，9，13 or 16
screen display mode.
：Favorite channel display button. If you save your favorite channel in the list, clicking
this button will directly play all favorite channels you have saved.
：Multiple channel choice button. You can select multiple devices at the same time and let
multiple channels to play simultaneously (The channels can not exceed the maximum number
of the current screen display mode).
：Snap button. Choose the channel and click this button to capture the channel image.
：Local record button. Choose the channel and click this button to start recording.
： Open/Close audio. Choose the channel and click this button to open/close the audio of
this channel.
：Open/Close talk. Click this button to pop up the servers which support talk function.
Select the device to start talking.
：Set video parameter button. Select the channel and click this button to set the video
parameters including brightness, hue, saturation and contrast.
：PTZ button. Click this button to pop up PTZ control panel.
： Stream switch button. If “3G/3G+/WIFI” network mode is
selected, you can switch between sub stream and main stream when only the single channel is
playing.
Other operation：
When the single channel is playing, the channel can be switched by swiping your finger left
and right.
When the single channel is playing, you can zoom in/out the image by swiping you finger up
and down
Server list
You can simultaneously connect 20 devices at most and there is a demo address for user test.
1）
Saved Server List interface A
IP-CAMERA User Manual - 43
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
When there is no any video information playing for the channel in the live interface, click this
channel to enter the above-mentioned interface.
Where there is video displaying for the channel in the live interface, long press this channel to
enter the above-mentioned interface.
：Return button. Click this button to return to the current interface.
：The current server list name. Click this button to switch between saved
server list and favorite server list.
：Edit button. Click this button to enter edit list.
： It indicates a device. the device channel will unfold by clicking the
device name.
： It shows connection status.
means the devices is connecting.
means the device has been connected.
means the device is not connected.
： Color means the device has been saved in favorite server list. Gray means the
device has not been saved in favorite server list.
2）Saved Server List interface B
IP-CAMERA User Manual - 44
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Click edition button to enter the above-mentioned interface.
：Finish button. After you finish editing, click this button to return to the saved server list
interface.
：Delete button. Delete the device. If this device has been added to favorite server list,
deleting it here will also be deleted in the favorite server list.
：Add button. Add a new device.
3）Saved Server list interface C
Click
button in the live interface to enter the above-mentioned interface.
4）Multiple Channel Choice Interface
Click
button to enter the above-mentioned interface.
：Click this button to return to the live interface and play the selected channel image.
：Selection button. Click the grey button to change it into color. The color button
means the channel is selected to play.
IP-CAMERA User Manual - 45
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
：The front number means you have already selected two channels to play. The
number after two means you can choose 4 channels at most.
Favorite Server List A
Click Saved Server list button to enter favorite server list interface.
：Color means the channel has been selected. Gray means the channel hasn‟t been
selected.
Click
button on the live interface to play the selected favorite channels. You can select
16 channels to play at one time.
Favorite Server List B
Click the edition button in the favorite server list to enter the above-mentioned interface.
：Click this button to delete the favorite device. The favorite channels under this server
name will also be deleted.
：Delete the favorite channel.
Favorite Server List C
IP-CAMERA User Manual - 46
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Click
button in the live interface to enter saved server list interface. Then click saved
server list button to switch to the above-mentioned interface.
Image View
View the snapping pictures.
Playback Interface
（Fig 1）
（Fig 2）
IP-CAMERA User Manual - 47
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
（Fig 3）
（Fig 4）
Fig 1 is local playback; Fig 2 is remote playback by time search; Fig 3 is remote playback by
event search; Fig 4 is remote playback by file search. Only a part of devices have the latter 3
playback modes.
Settings Interface
This interface includes local configuration and remote configuration (only some devices
support this function). You can configure the local software or remotely set the device.
Information Interface
IP-CAMERA User Manual - 48
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
In this interface, you can view system information, network information and online user
information.
7.4 By Phones with Android OS
Software Installation
Step 1: Run Google Market program
Step 2: Search ”Supercam”
Step 3: Press “Install” button.
Step 4: Click “OK” button.
Step 5: User can view the download and install process in notifications; finished download,
the software will install automatically.
IP-CAMERA User Manual - 49
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Login
Enter into server‟s IP address (or domain name), user‟s ID and password.
Click “Remember server” to save the setting; click
button can quick input saved server
address, user name and password.
Main menu
Playback
playback record file
Image
image view
Log
log record
Server List
device list
Live
live view
Settings
software setting
Information
device information view
Help
software help center
Logoff
logoff and return to login interface
IP-CAMERA User Manual - 50
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Live view
Item
Description
Item
Description
Snap
Hide
Live audio
Record
PTZ, click to switch
hide
to PTZ interface
Image view
The first picture
The previous picture
Next picture
The last picture
Zoom in
Zoom out
Delete picture
Record playback
Play/pause
Stop
Fast forward
Slow playback
IP-CAMERA User Manual - 51
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Click Playback icon in the main menu interface to enter into the playback interface. Then
choose the channel and file. Double click the file name to playback.
Server list
Add a server list
Modify a server list
Delete a server list
Return
Return to the previous interface
Config interface
If Audio alarm is enabled, when Video
Loss/Sensor/Motion
Alarm setting
happen ， sound
alarm will be triggered; If shake Alarm
is
enabled,
Loss/Sensor/Motion
when
Video
happen ， shake
alarm will be triggered.
User can setup the relevant parameters
Storage setting
of mobile video. This function can be
valid only insert SD card.
Display setting
User can setup display order or display
mode.
IP-CAMERA User Manual - 52
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
Information view
In this interface, user can view the information of device and phone, such as device name,
device ID, the software version of device or phone, etc.
7.5 By Phones with Blackberry OS
1. Open the browser of BlackBerry phone and enter sever address.
2. Click “Supercam” to link.
3. Click “Download” button on the popup interface and the download progress will be shown.
4. Finished downloading, the software will be installed automatically.
Note: If the software fails to download, please check in accordance with the following
steps:
IP-CAMERA User Manual - 53
C
Ch
haap
ptteerr 77 M
Mo
ob
biillee SSu
urrvveeiillllaan
nccee
1. Check whether the network of mobile phone is normal or not
2. Check whether the IP-Cam server connect network normally or not
3. Modify the option of Browser Configuration.
(1) Enter into Menu->Option->Browser Configuration; configuration referring to the
following figure in the left.
(2) Enter into Menu->Option->Cache Operations, clear up browser cache. Refer below
picture in the right:
Note：When the user uses the Supercam software in the mobile phone with touch screen, there
will be compatible problem.
Solution: Enter into Options Menu->Advance options->Applications->Supercam and click
“Disable Compatibility” button. This problem will be solved.
IP-CAMERA User Manual - 54
C
Ch
haap
ptteerr 88 IIP
P--TTo
oo
oll
8 IP-Tool
Updating through IP-Tool
Note: Do not cut off power supply and internet when updating; If the device is unable to
start because of the failure of upgrade, it needs to retrofit.
First， acquire the IP-Tool from the supplier and then double click the IP-Tool icon
to
run this software. Then the device can be searched; if the device can‟t be searched, please
check whether the PC and the device connect to the network or not.
Click the device to check its detail information shown as below:
When upgrading the software and kernel, the IP address of PC and device should be at the
same network segment. If the network segment is different, user should change the IP address
by right clicking the device and then select “network setup”.
Modify IP address dialog box will appear as follows:
IP-CAMERA User Manual - 55
C
Ch
haap
ptteerr 88 IIP
P--TTo
oo
oll
Modify IP address and click OK button to exit the dialog box, IP-Tool will display the new IP
address. Select the device; right click “Update software” as below picture shows:
Click “Update” to start upgrading，the progress bar will display as below. When upgrading,
please do not disconnect PC and the device and make sure the power is on.
After finishing upgrading, a massage box will pop up as below:
Click OK button to exit the update dialog box, and then the device will restart automatically.
Select the device, right click it to select “Update kernel” and then a dialog box will appear as
below:
IP-CAMERA User Manual - 56
C
Ch
haap
ptteerr 88 IIP
P--TTo
oo
oll
Enter into Update Kernel interface dialog box, input username and password; click “Browse”
to select the Update file (mboot8180-8180); click “Update” button to start updating. Do not
disconnect PC to device when upgrading and make sure the power is on. The update progress
bar will display as below:
After finishing upgrading, a message box will pop up. After a while, the device will restart
automatically.
IP-CAMERA User Manual - 57
C
Ch
haap
ptteerr 99 Q
Q&
&A
A
9 Q&A
1. Q: Forget password
A：Joint the default line and GND line to reset.
Default IP: 192.168.0.201
User name: admin
Password: 123456
2. Q：Cannot connect devices through IE browser
A: Network doesn‟t connect well. Please check the connection and make sure it connected
well.
B: IP is not available. Reset the valid IP.
C: Web port number has been revised: contact administrator to get the correct port number.
D: Exclude the above reasons. Recover default setting by jointing the default line and GND
line.
Note: default IP: 192.168.0.201，mask number: 255.255.255.0
3. Q：IP tool cannot search devices.
A：It may be caused by the anti-virus software in your computer. Please exit it and try to
search device again.
4. Q：IE Cannot download ActiveX control.
a. IE browser blocks ActiveX. Please do setup following below.
① Open IE browser. Click Tools-----Internet Options….
② select Security------Custom Level….Refer to Fig 4-1
③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 4-2
IP-CAMERA User Manual - 58
C
Ch
haap
ptteerr 99 Q
Q&
&A
A
Fig 4-1
Fig 4-2
④ then click ok to finish setup.
b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them.
5. Q：Why not sound?
A：Without connect audio input device. Please connect and try again.
B: Without enable audio function at the corresponding channel. Please check AUDIO item to
enable this function.
6. Q：Why doesn’t the device connect to wireless?
A: Check the statues of wireless router. Please make sure the router is open
B: Check the router and the device port. Please make the router setup is matched with device
port.
7. Q: How to do when the device is unable to start normally when upgrading?
If the device is unable to start normally when upgrading, please rename the files suffixed
with .tar as updatepack.tar and copy it to the root directory of SD card. Restart the device and
then the device will upgrade automatically from the SD card. After finishing upgrading, the
user can search the IP address of IP Cam in the IP Tool.
IP-CAMERA User Manual - 59
C
Ch
haap
ptteerr 1100 SSp
peecciiffiiccaattiio
on
n
10 Specification
Model
CMOS 2 Mega Pixel Network IR Weather-proof Camera
Video compression
H.264
Audio compression
G711A
Image resolution
1080P ,720P,VGA,QVGA
Video resolution
1920x1080(1080P)；1280x720(720P)
640x320 (VGA)； 320x160(QVGA)
Frame rate
Max30 fps
1080P: 1024kbps～12288 kbps (Adjustable)
stream
720P: 512kbps～6144 kbps (Adjustable)
VGA: 128kbps～2560 kbps s(Adjustable)
QVGA: 64kbps～1024kbps(Adjustable)
Audio
1-ch MIC input, 1-ch MIC output
Net Protocol
TCP/IP, DHCP, PPPoE, DDNS, SMTP, UPnP，RTSP,NTP
LAN
10/100M RJ45
Remote control
IE browsing，remote control via CMS
IR Range
30m
Protection Grade
IP66
Client number
Max six
Power
DC12V/PoE
A2
IP-CAMERA User Manual - 60