Download Skalflex Wall Impregnation Safety data sheet

Skalflex Wall Impregnation Safety data sheet Last printed on 23.03.2007 1. Identification of substance/preparation and manufacturer Product name: Skalflex Wall Impregnation Product No.: N/A Application: Impregnation Packaging: 2.5 and 10 litre containers Manufacturer: SKALFLEX A/S Industrivej 20b DK­8800 Viborg Tel. +45 8661 2299 Fax +45 8661 2199 2. Composition/information on ingredients Ingredients CAS No. Weight% Classification Does not contain any contents subject to disclosure. 3. Hazards identification Repeated or prolonged contact with skin may cause irritation. 4. First­aid measures Inhalation: Seek fresh air. Skin contact: Wash off skin in plenty of water and soap. Get medical assistance if irritation persists. Eye contact: Open eyelids widely and rinse eye with plenty of water for at least 15 minutes. Get medical assistance if irritation does not clear. Ingestion: Do not induce vomiting. Let victim drink water. Get medical assistance, if necessary. 5. Fire fighting measures
The product is not flammable. To the extent possible, remove product from areas exposed to fire hazard. Toxic gasses may form upon exposure to fire. 6. Accidental release measures In case of spills in outdoor environment, contact fire authorities. Cover/absorb large spills with sand or other absorbent material. Treat as waste. Also see items 8 and 13. Do not allow run­off to sewer. 7. Handling and storage Avoid contact with skin and eyes. If skin contact is unavoidable, use protective gloves, if necessary. See item 8. Store product in tightly sealed original container in a frost­free place and out of the reach of children. Fire rating: ­ 8. Exposure controls/personal protection Code No.: 00­1 (1993) The following contents are subject to disclosure regulations and have exposure limits in accordance with executive order C.0.1, 2005: None If necessary, the following personal protective equipment is recommended: Respiratory protection: Gloves: Eye protection: Hygiene: 9. ­ Rubber/Neoprene Goggles/guard, if necessary Immediately change soaked clothes Physical and chemical properties Appearance: Odour pH Boiling temperature Melting temperature Liquid Vinegar 4­6 100° * Solubility in water Distribution coefficient Flash point Auto ignition temperature Explosive limit Completely * * * *
Steam pressure Bulk density * Approx. 1 Viscosity Other * * *: no data or not relevant 10. Stability and reactivity Stable under normal conditions of use. 11. Toxicological information (properties posing a risk to human health) Inhalation: Inhalation of aerosols may be irritating to airways. Skin contact: Repeated or prolonged contact with skin may cause irritation. Eye contact: Contact with eyes may cause irritation. Ingestion: Ingestion may cause nausea, discomfort and possibly vomiting. 12. Environmental information (on contents) Hazard to the water environment: Hazard to other ecosystems: 13. Insufficient data to apply environmental hazard classification in accordance with regulations from the Danish Ministry of the Environment. Insufficient data Disposal considerations The product is not considered hazardous waste. Dispose of spills and residues according to municipal guidelines, e.g. at a municipal chemical waste receiving facility. European Waste Catalogue Code (EWC Code): 08 01 03 00 Chemical waste group: H 14. Transport information The product is not considered dangerous goods for transportation.
15. Regulatory information Hazard label on container: No classification required in accordance with regulations from the Danish Ministry of the Environment. Code No.: 00­1 (1993) Application limitations: None Requirements for special training: None In addition, the product is subject to the following special executive orders: Order on work with code­numbered products, no. 302 of 13 May 1993. 16. Other information The user must receive thorough instructions in performance of work and know the contents of this user manual. General update of entire safety data sheet.