Download Elevator - FlexLink

Introduction function and components
3.2.1.5.2
Vertical motion
Lifting interlock sensor
Vertical motion
position sensors
Lifting interlock sensor
reflector
Figure 14 Inductive sensors
Vertical motion sensors
Inductive sensors are used at stop positions and low-speed stretches of the
vertical motion.
Interlocking sensors
Created by EBCCW 00:06
Retro-reflective photo-electric sensors are mounted in the upper part of
frame with reflectors mounted on the bottom plate of elevator. Their purpose is to interlock vertical motion if obstacle is detected.
5112204
31