Download User Manual.pptx

Audio Accessory 1.0 USER MANUAL Table of Contents §  Mission Statement ………………………………………………….3 §  Audio Accessory Diagram & Assembly …………………..4 §  Placing the Device in Your Ear ………………………………..5 §  Turning the Device On ……………………………………………6 §  AdjusEng Volume and Profile SeHngs .……………………7 §  Charging BaLery …………………………………………………….8 Mission Statement The creaEon of this device stems from a concept created by three Industrial Design students trying to defy the social sEgma of hearing aids. The goal was to create a fully funcEoning universal audio device that is used by both hearing and hard-­‐of-­‐hearing consumers that blends the line between hearing aids and other technologies such as Bluetooth communicaEon, music streaming and easy charging opEons Audio Accessory Diagram & Assembly battery enclosure
Interface with standard ear
tube and ear molds
round
enclosure
transfer
module
Audio Accessory Diagram & Assembly Microphones
5 way Toggle Button
Micro-USB for transfer
module connection
Pin connection for
transfer module for
stability
Placing the Device in Your Ear Your hearing aid comes with clear tubing that connects from the ear hook to your ear canal. Also, there are various sizes of ear plugs designed to fit most adult ears. •  ALach the long porEon of the clear tubing to the Ep of the ear hook. •  Ensure the ear bud porEon of the Ep points INTO THE EAR CANAL. Turning the Device On and AdjusEng Volume and Profile SeHngs 5 Toggle Switch:
up = volume up
down = volume down
right = profile up
left = profile down
in = power on/off
Charging BaLery Tube for wires
Micro USB input
The audio accessory uses size 675 zinc-­‐air baLeries. Please note the expiraEon date on the baLery. Also, do not leave exhausted baLeries in the device, as they may leak and damage the hearing aid. You will need to insert a new baLery to start using your hearing aid. Before inserEng a new baLery into the hearing aid, remember to remove the adhesive tab. Do not use baLeries on which there is a sEcky residue from the tab or other unwanted substance as this can block the baLery air holes. Plug the appropriate end of the USB cable into the charger or into the USB port of your computer. Plug the other end of the USB cable into the micro USB port on your device.