Download English Version PDF

TM
TM
1450PSI ELECTRIC PRESSURE WASHER
ITEM: 248901
MODEL NO.: AP-PW1450-ZE01
RCE
TASK FO
US
CAUTION !
BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY
AND RETAIN IT FOR FUTURE REFERENCE.
IF YOU MUST STORE YOUR PRESSURE WASHER IN A PLACE WHERE TEMPERATURE IS
BELOW 41ºF (5ºC), YOU MUST APPLY WINTERIZING PROCEDURE TO PROTECT IT. FAILURE
TO WINTERIZE THE UNIT MAY PERMANENTLY DAMAGE PUMP AND VOID THE WARRANTY.
SEE PAGE 10 FOR WINTERIZING PROCEDURE.
QUESTIONS, PROBLEMS, MISSING PARTS?
Before returning to your retailer, visit our website or call our customer service at
www.activeproducts.com / 1-866-990-9918
PURCHASE DATE: _______________ SERIAL#: ___________________________________
PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT.
WARRANTY REGISTRATION BY INTERNET, WWW.ACTIVEPRODUCTS.COM.
PW1450-ZE01_12/2006_REV.1
TABLE OF CONTENTS
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Features and Electrical Power Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.......................................................
Replacement Parts and Diagram
Assembly and Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working with Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shut Down and Clean-up . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking a Break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Winterizing and Long-term Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintaining Your Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Specifications
Max. pressure:
Water flow rate:
Power source requirement:
Electrical cord:
High-pressure hose:
Rated current:
Water supply:
i
1450PSI
1.3GPM
120V, 60HZ
35’ WITH GFCI
20’
11A
COLD TAP WATER
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. i
. 1
. 2
. 3
. 4
. 7
. 8
. 9
. 9
. 10
. 11
. 12
. 14
IMPORTANT PRECAUTIONS - READ FIRST!
Safety Warnings
When using this product, basic precautions
should always be followed:
• Read all the instructions before using the
product.
• High-pressure jets can be dangerous if
subject to misuse. The jet must not be
directed at persons or animals.
• Water spray must never be directed towards
any electric wiring, devices or directly
towards the pressure washer machine itself
or fatal electric shock may occur.
• To reduce the risk of injury, do not operate
the machine near children.
• Learn how to stop the machine and release
pressure quickly. Be thoroughly familiar with
the controls.
• Stay alert—watch what you are doing.
• Wear safety goggles.
• For use with cold water supply only. Do not
draw other liquids.
• Do not use acids, solvents, or any other
flammable material in this product. These
products can cause physical injuries to the
operator and irreversible damage to the
machine.
• To reduce the risk of electrocution, keep all
connections dry and off the ground. Do not
touch plug with wet hands.
• The pressure washer should not be used in
areas where gas vapours may be present.
An electric spark could cause an explosion or
fire.
• To minimize the amount of water getting into
the pressure washer, the unit should be
placed as far as possible from the cleaning
site during operation.
• Avoid accidental starts. Shut power “OFF”
before connecting or disconnecting cord to
electrical outlets.
• Do not operate the product when fatigued or
under the influence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand
with both feet balanced at all times.
• Prior to starting the pressure washer in cold
weather, be sure ice has not formed in any
part of the equipment.
• Never carry your pressure washer by the
cord. Do not pull on the cord to disconnect
from the outlet.
• To allow free air circulation, the pressure
washer should not be covered during
operation.
• The Trigger Gun Safety Lock prevents the
trigger from accidentally being engaged. This
safety feature does not lock trigger in the
“ON” position.
• California Proposition 65: This product or its
power cord contains lead, a chemical known
to the State of California to cause cancer,
birth defects or other reproductive harm.
Wash hands after use.
Warnings
• Do not use with flammable liquids and toxic
chemicals.
• Injection Hazard: Equipment can cause
serious injury if the spray penetrates the skin.
• Do not point the gun at anyone or any part of
the body. In case of penetration seek medical
aid immediately.
• This system is capable of producing
1450PSI. To avoid rupture and injury, do not
operate this pump with components rated
less than 1450PSI working pressure
(including but not limited to spray guns, hose
and hose connections).
• Before servicing, cleaning or removal of any
parts, shut “OFF” power and relieve
pressure.
• Do not spray electrical apparatus and wiring.
If connection is made to a portable water
system, the system shall be protected
against backflow.
1
SAFETY FEATURES AND ELECTRICAL POWER INFORMATION
The pressure washer is equipped with a stop
device that will sense when the trigger on the gun
is released. It will open the power circuit to the motor
and cause the pressure washer motor to stop. Motor
will resume again when trigger is pulled.
Extension Cords
If possible, do not use extension cords with this
product. However, if you must use one, observe all
the warnings and instructions listed below:
Warning
Warning
The pressure washer is also equipped with a
main power “ON/OFF” switch located on the
unit. It should always be moved to the “OFF”
position when the pressure washer is not
being used to prevent possible injury or
damage.
Ground Fault Circuit Interrupter:
This pressure washer has a ground-fault
circuit-interrupter (GFCI) built into the plug of the
power supply cord. This device provides additional
protection from the risk of shock. Should replacement
of the plug or cord become necessary, use only
identical replacement parts that include GFCI
protection.
2
Extension cords are not recommended unless
they are plugged into a ground fault
circuit-interrupter found in circuit boxes or
protected receptacles.
Use a sufficient gauge:
Maximum cable length: 50’ = 14 AWG
• Use only extension cords that are intended for
outdoor use. These extension cords are identified
by a marking “Acceptable for use with outdoor
appliances; store indoors while not in use.”
• Use only extension cords having an electrical rating
not less than the rating of the product.
• Do not use damaged extension cords. Examine
extension cord before using and replace if
damaged. Do not abuse extension cord and do not
yank on any cord to disconnect.
• Keep cord away from heat and sharp edges.
• Always disconnect the extension cord from the
receptacle before disconnecting the product from
the extension cord.
• To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with
wet hands.
REPLACEMENT PARTS AND DIAGRAM
5
3
6
7
4
2
1
CORNER ITEMS:
8 USER MANUAL
9 NEEDLE
Parts List
Item no.
Quantity
Part Name
Parts No.
1
1
Water filter
ZE01-000-0003
2
1
Quick-connect coupling & inlet adaptor
ZE01-050-0000
3
1
Gun assembly
ZE01-090-0001
4
1
High-pressure hose
ZE01-090-0002
5
1
Adjustable wand
ZE01-090-0003
6
1
Turbo wand
ZE01-090-0004
7
1
Gun/wand holder
ZE01-000-0001
8
1
User manual
ZE01-900-0002
9
1
Needle
ZE01-900-0001
3
ASSEMBLY AND OPERATING INSTRUCTIONS
Assembly Time: 2 minutes / Tools Required: None
Surface Preparation
Before starting any cleaning task, it is important to inspect the area for objects which could create a
hazard. Remove from the workarea which could be tripped over, such as toys or outdoor furniture.
Ensure that all doors and windows are closed tight.
Caution
• Never use the pressure washer to draw in
water contaminated with solvents (e.g.
paint thinners, gasoline, oil, etc.).
• Dirt in the feed water will damage the unit.
To avoid this risk, we recommend
checking the water filter (located inside
the water inlet; to clean it out see
Maintenance section on page 11).
• Always prevent debris from being drawn
into the unit by using a clean water
source and an accessory water filter if
required.
Fig. 1
Water Supply (Cold Water Only)
• Do not draw non-water liquids through the unit. For
use with cold water supply only.
• Water hose must be at least a 1/2” in diameter.
• Flow rate of water supply must not fall below 2 GPM
(gallons per minute).
• Flow rate can be determined by running the water
for one minute into an empty 5-gallon container.
• The water supply temperature must not exceed
104°F (40°C).
Caution
To prolong the life of the unit, it is
recommended to rest the unit 5 minutes
after every 30 minutes of use.
Fig. 2
Step 1
Step 2
Make sure that the ON/OFF switch is in the
“OFF” position.
Separate the adaptor and quick-connect
coupling. Attach inlet adaptor to the machine’s
inlet and attach the quick-connect coupling
onto the garden hose.
Fig. 3
Step 3
Insert the wand into spray gun, and twist 1/4 turn until rectangular tab appears.
4
ASSEMBLY AND OPERATING INSTRUCTIONS – continued
Fig. 4
Step 4
Attach the high-pressure hose to the water outlet. Twist tightly to avoid leakage.
Fig. 5
Fig. 6
Step 5
Step 6
Attach garden hose to water supply and turn
water on.
Plug the unit into an outlet. Press “TEST”.
then press “RESET” to assure proper
connection to power.
5
ASSEMBLY AND OPERATING INSTRUCTIONS – continued
Fig.7
Step 7
Before turning the unit ON, depress the trigger to bleed any trapped air out of the pump and
hose.
Fig.8
Step 8
Start the pressure washer by turning ON/OFF switch to ON.
6
USING THE ACCESSORIES
Fig. 9
Adjusting The Spray
The adjustable spray nozzle can be adjusted
from fan to jet. The spray is adjusted from jet
to fan spray by turning the nozzle as shown
in Fig. 9.
Caution
Jet spray adjustment is very aggressive. Do
not adjust while spraying. We recommend
that for most cleaning applications a 20º
spray angle should be used to avoid
damage to the surface being sprayed.
Caution
To prolong the life of the unit, it is
recommended to rest the unit 5 minutes
after every 30 minutes of use.
7
WORKING WITH DETERGENTS
Using the detergent
Important notice
To enhance the efficiency of the pressure washer, When you have finished using detergent, always
follow the “Cleanup Instructions”. Failure to
sometimes it is necessary to use detergents to
help loosen tough dirt and grime.
clean properly will cause the injection system to
become clogged and inoperable.
Caution
This machine has been designed for use with
pressure washer detergents only. The use of
other detergents or chemicals may affect the
operation of the machine and will void the
warranty.
Warning
•
•
•
Note: To apply detergent, the adjustable
nozzle must be in the low-pressure position.
Detergent Application
Step 1
Pull the detergent suction tube out and
insert it into a detergent container.
Fig.10
•
Never use bleach, chlorine products
and other corrosive chemicals.
Never use liquids containing solvents
(i.e., paint thinners, gasoline, oils).
Never use ammonia products.
Never use acid-based products.
These products can cause physical
injuries to the operator and irreversible
damage to the machine and/or
damage the surface being cleaned.
Cleanup Instructions
Step 1
Insert the detergent suction tube into a container
of fresh water.
Step 2
Set the nozzle to the low-pressure setting.
Step 3
Pull and hold the gun trigger for 20~30 seconds.
Allow fresh water to rinse through the detergent
injection system.
Step 2
Adjust the nozzle to low-pressure setting to
apply the detergent.
Step 3
Depress the gun trigger and the detergent will
be automatically injected and mixed with water.
Step 4
Apply detergent to work area. Do not allow
detergent to dry on surface.
Step 5
Release the gun trigger and adjust nozzle
to high pressure setting. Depress the gun
trigger and rinse the surface in a sweeping
motion.
8
SHUTTING DOWN AND CLEANING UP
Step 1
Step 4
Turn the switch to “OFF” (0) position and
unplug cord from outlet.
Disconnect the garden hose from the water
inlet on the unit.
Step 2
Step 5
Turn off the water supply.
Disconnect the the high-pressure hose from
the high-pressure outlet and engage the gun
safety lock.
Step 3
Press trigger to release water pressure for
20~30 seconds.
Warning
Turn off water supply and squeeze trigger
to depressurize the unit. Failure to do so
could result in personal injury due to
descharge of high-pressure water.
TAKING A BREAK
If taking a break of five minutes or more:
Step 1
Engage gun safety lock.
Step 2
Turn pressure washer to “OFF” (O) position.
Step 3
Unplug the power cord from the outlet.
9
WINTERIZING AND LONG-TERM STORAGE
Optimum Winterizing Procedure
Alternative Procedure
Material required: Pump saver
If you cannot perform the Optimum Winterizing
procedure, you can still protect your pressure
washer from winter-damage:
Winterizing your pressure washer will help
protect and prolong its life. It is strongly recommend you follow the below steps using a pump
saver. This will keep the internal parts
lubricated, protected from rust, and prevents the
pump from freezing.
1. Connect the pump saver hose onto the
adaptor and quick-connect coupling.
2. Depress button on top of antifreeze
container.
3. Continue until fluid exits the pump outlet.
4. Remove the hose from pump inlet.
Pump saver is available at your local hardware
stores.
Fig.11
10
1. Disconnect all water connections.
2. Turn on the machine for a few seconds.
Press trigger to bleed any remaining water
in the pump. Turn off immediately.
3. Remove the gun and hose from the
pressure washer. Drain any excess water.
Roll hose carefully and do not allow hose to
be kinked.
4. Store the machine and accessories in a
room that does not reach freezing temperatures. Do not store near furnace or other
USER MAINTENANCE
Connections
Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and
lubricated with non-water soluable grease.
Fig.12
Fig.13
Adjustable Nozzle
Water Filter Screen
When the nozzle is clogged, it will cause the
pump to build pressure and may cause the unit
to surge. You can clean the nozzle by carefully
inserting a thin, sharp instrument (i.e. paperclip)
into the tip to rid it of deposits.
The pressure washer is equipped with a water
inlet filter that prevents debris going into the
pump. If the filter is not kept clean, the flow of
water to the pressure washer will be restricted
and the pump may be damaged.
For the adjustable nozzle, you can also
lubricate the nozzle collar (high-pressure/lowpressure) by using non-water soluble grease
regularly.
1. To clean inner water screen, remove quick
connector and remove the filter screen from
the pump inlet.
2. Rinse screen until it is free of debris and
blockage.
3. Replace screen and quick-connector
immediately.
Air Vents
The air vents located on the front and back of
the pressure washer must be kept clean and
free of any obstructions to ensure proper
air-cooling of the motor during operation.
11
TROUBLESHOOTING
Symptom
Cause
Solution
Motor will
not start.
GFCI needs to be reset.
Press RESET button on the GFCI.
On/Off switch is in the
“OFF” (O) position.
Turn switch to the “ON” ( | ) position.
Unit does
not reach
high pressure.
Output pressure
varies high
and low.
No detergent.
12
Power cord is not plugged in.
Plug in power cord.
Extension cord is too long.
Extension cord is not proper gauge.
Extension cord is damaged.
Replace extension cord with a
50’ 14 gauge cord.
Electrical outlet does
not supply adequate power.
Try a different outlet.
Diameter of garden hose is too small.
Replace with a inch or
5/8” garden hose.
Water supply is restricted.
Check garden hose for kinks,
leaks and blockage.
Not enough inlet water supply.
Open water source full force.
Water inlet filter is clogged.
Remove filter and rinse
out in warm water.
Pump is sucking air.
Check that hoses and fittings are air
tight. Turn “OFF” machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges through
the nozzle.
Not enough inlet water supply.
Turn water on full force. Check garden
hose for kinks, leaks or blockage.
Pump is sucking air.
Check that hoses and fittings are air
tight. Turn “OFF” machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges through
the nozzle.
Water inlet filter is clogged.
Remove filter and rinse
out in warm water.
Discharge nozzle is obstructed.
Blow out or remove debris
with a fine needle.
Detergent container is empty.
Add more detergent.
Detergent bottle or suction tube
not properly connected.
Check connections.
Detergent is too thick.
Dilute detergent.
Filter on detergent suction tube
is clogged.
Run warm water through filter
to remove debris.
Damaged or clogged detergent
suction tube.
Remove obstruction or replace
detergent suction tube.
Nozzle is in high-pressure position.
Turn nozzle tip to low-pressure
position.
Discharge nozzle is obstructed.
Blow out or remove debris with
a fine needle.
TROUBLESHOOTING
– continued
Symptom
Cause
Solution
Garden hose
connection leaks.
Loose fittings.
Tighten fittings.
Missing/worn rubber washer.
Insert new washer.
Spray wand, or
extension, or
nozzle leaks.
Spray nozzle not properly attached.
Insert the spray nozzle into the trigger
gun. Carefully press in against the
spring tension and twist into the
locked position.
Broken o-ring or plastic insert.
Call Customer Service.
Pump is noisy.
Pump is sucking air.
Check that hoses and fittings are air
tight. Turn off machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges through
the nozzle.
Water leaks from
pump (up to 10
drops per minute
is permissible).
Loose fittings.
Check that all fittings are tight.
Water seals are damaged or worn.
Call Customer Service.
Oil Drip.
Oil seals are damaged or worn.
Call Customer Service.
Motor buzzes
but fails to run.
Supply voltage below minimum.
Verify that only the pressure washer is
running on this circuit.
System has residual pressure.
Turn unit “OFF”, squeeze trigger on
spray want to release pressure, then
turn unit “ON”.
Voltage loss due to extension cord.
Do not use extension cord with this
unit—plug directly into power outlet.
Pressure washer not
used for long periods.
Call Customer Service.
IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT
WWW.ACTIVEPRODUCTS.COM OR CALL CUSTOMER SERVICE AT 1-866-990-9918 FOR
ASSISTANCE.
13
WARRANTY
LIMITED 1 YEAR WARRANTY
This pressure washer is warranted to be free of defects in materials and workmanship under normal
residential use for one (1) year.
Specific warranty applies to:
• Electric motor and pump are warranted for one (1) year.
• Standard accessories and attachments including the gun, wand/hose and coupler are warranted
for a ninety (90) day period.
The warranty period is calculated from the date of purchase by the end user and covers the cost for
replacement parts/equipment. In order to verify a warranty situation a copy of the original receipt or
gift receipt must accompany the warranty claim, along with the manufacturer’s serial number from
the product. Any warranty claim, work, or replacements given are to fulfill the terms of the original
warranty period only.
The manufacturer‘s obligation under this warranty shall strictly be limited, at manufacturer’s option,
to replace any pressure washer or parts thereof, which in the opinion of the manufacturer, shows
defect in workmanship or material. All decisions of Active Products with regard to this limited
warranty shall be final. NO RETURNS or REFUNDS will be allowed by the retailer or manufacturer.
To make a warranty claim or inquiry, you must call 1-866-990-9918. You must have the product
serial number and receipt information ready.
If defects should appear within one year of purchase, you may return the unit with your receipt as
proof of purchase to the place of purchase for an exchange of either a new or refurbished unit, at
manufacturer’s discretion. There will be no REFUNDS provided.
The warranty does NOT cover:
• Merchandise sold as reconditioned, used, demonstration or floor models.
• Any commercial, industrial or rental usage of this product. Any such usage will void the implied
warranty.
• Any product that has been damaged by freezing, dropping, misuse, neglect, accident, abuse,
improper handling, normal wear and tear, or non-compliance with the owner’s manual
• Any product that has been damaged by a contaminated water supply, water sediment or
chemicals/detergents that are not approved by or recommended by Active Products.
• Any product that has been damaged by acts of nature such as fires, floods, earthquakes, lightening strikes, etc.
• Damage caused by repairs made by the end user or any service center not authorized by Active
Products. Any such tampering will void the implied warranty.
• Any cost for shipping by the customer or authorized service center of the allegedly defective
product.
• Any cost for shipping of replacement parts or accessories. Such shipping costs will be borne in
full by the end user.
• Any non-standard or bonus accessory/attachement included with the original product.
The manufacturer shall in no event be liable for injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of this product. This warranty
does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents;
repairs or alterations; or lack of maintenance. The manufacturer shall not be liable for any misrepresentations by stores, store employees, or any parties, that make claims on this product.
This warranty is non-transferable and only applies to products that were sold in and reside in the
United States. This warranty gives you specific legal rights. You may have other rights, which vary
by state.
If you have any questions or comments, visit our web site at www.activeproducts.com or call our toll
free customer service line at 1-866-990-9918.
14