Transcript
Synergy Automotive Electronics - Keetec CZ 100 User Manual—Rev 1 Product Description: The Keetec CZ 100 is a Keyless Entry System, designed to be used on 12V vehicles. It is supplied with two remote control transmitters, either 4 Button with key torch or OEM Style remote transmitter with flip blade. Both have separate lock and unlock buttons and in addition, both systems have a separate button which can be used to control additional functionalities, including a luggage compartment release. Please consult your dealer for additional information and accessories. Two Remote Control Transmitters supplied - Up two 6 Transmitters in total can be coded to the system - Please consult your dealer The system will lock the doors 10 seconds after the ignition is turned on, then automatically unlock after the ignition has been switched off. This functionality can be programmed out if desired, please consult your dealer. Locking your vehicle: Press the lock button and the indicators will flash once. If your vehicle has a deadlocking facility that requires a second pulse from the Keyless entry system, you can press the lock button twice. The system can also be configured by your dealer to perform this action by default. Unlocking your vehicle: Press the unlock button and the indicators will flash twice. If your vehicle has selective unlocking, then by pressing the unlock button once, only the driver’s door will open, or pressing a second time will unlock all the doors. The system can also be configured by your dealer to perform this action by default. A programming/Functions button can be installed on the dashboard, this will provide a facility to lock and unlock the vehicle. It should be noted that this button is disabled once the vehicle has been locked using the remote control for security reasons. Programming button Standard Remote Transmitter www.synergy-automotive.com OEM Style Remote Transmitter [email protected] Technical - Nick Oakland: 07584 485189
