Download Temperature Controller

Parameter Functions and Definitions
5-29
Table 5.AF
Parameter
Configurable Range
Units
Default Value
Control Period (OUT1)
1…99
Second
20
Control Period (OUT2)
1…99
Second
20
Related Parameter
PID/ON/OFF (Initial Setting function group) (p. 5-26)
Direct/Reverse Operation
Function: This parameter allows you to configure the controller for the direct
or reverse operation of the manipulated variable (MV). Direct operation refers
to the control method where the manipulated variable is increased according
to the increase in the process value. Alternatively, reverse operation refers to
control method where the manipulated variable is increased according to the
decrease in the process value.
Table 5.AG
Selections
Default Selection
or-r: Reverse operation
or-d: Direct operation
or-r
Alarm Type for Alarm 1
Conditions of Use: The Alarm 1 Type must be supported by the controller.
Function: This parameter allows you to configure the type of alarm operation
for Alarm Output 1. Select one of the following alarm 1 types:
Deviation/Deviation range/Absolute value
See the alarm 1…3 type list, Table 5.AH.
Publication 900-UM002C-EN-E - January 2004