Download Water Heaters - AutoSpec Media Server

Water Heaters
Product Guide 2013
water
heaters
Water Heaters
When it comes to quality we do not know any compromises. We
have earned a reputation for our quality and designs in the industry.
Our Midrand factory boasts state of the art equipment, with
superior technology. The fully automated processes at the Franke
plant ensures consistency in our quality.
It is thanks to this precision that Franke Water Heating are
accredited with the SABS mark SANS 151 as well as ISO 9001 for
Quality Management.
The Franke geyser is IPX4 rated according to an international
standard. This rating classifies the geyser as splash resistant and
suitable for installation outside and even be exposed to rain. This
means the geyser can be installed where easy access can be gained
for maintenance and replacement. Having the geyser outside not
only frees up space inside the dwelling but also mitigates water
damage caused by plumbing failures.
SANS 151
IPX4
Water
Heaters
Water Heaters
High Density Polyurethane Insulation
Durable High Quality Nickel Plated
Element
Quick Connect Thermostat
Easy Access Anode
Cold Water Diffuser to Maximise Hot
Water Output
3
Female Outlet for Low Flow Resistance
Fully Automated Projection Welded
Sockets
Fully Automated MIG Circular Welding
Pressed, Fully Galvanised Brackets
Environmentally Friendly Chemical Free
Electrostatic Powder Coated Enamel
Lining Process
4
Water
Heaters
Water Heaters
Water
Heaters
Water Heaters
SANS 151
1
3
4
5
6
A
A
CombiSlim
222 5
B
B
483
412 3
Ø473
Specifications
5
6
A
D
A
L
130 2
4
Franke CombiSlim 400kPa electrical storage water heater/geyser compliant
C
with IPX4 water protection standard
in accordance with IEC 60529 for
exterior installation. Installation shall be in accordance with SANS10254
and installed in vertical wall mount/ horizontal floor mount/ horizontal
99 5 117 5
wall mount
position. All electrical connections to conform to SANS10142
420
D
-1 and in accordance
with the manufacturers
installation and maintenance
instructions.
146 2
C
B
Capacity (L)
50
100
150
L (mm)
540
915
1300
Mass (kg)
21
29
43
A (mm)
200
555
936
Capacity
DO NOT SCALE
1
99 5 117 5
C
130 2
146 2
412 3
F
REVISIONS
GENERAL TOLERANCES
MACH 
0,1
0,2
0,3
0,5
0,8
2
D
420
DO NOT SCALE
E
COPYRIGHT NIRO-Plan AG
CombiSlim Geyser Sizes
ST ANGLE PROJECTION
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
N/A
APPROVED
DATE
MATERIAL
SCALE
4
1
DRAWN BY
1
OF
5
DRAWING NUMBER
5
T Rudman
9/19/2012
REV
NGT 0033
1
6
E
50L
COPYRIGHT NIRO-Plan AG
CombiSlim Geyser Sizes
483
E
MASS
SHEET
2
IPX4
F
ABOVE
0,5
6
30
120
315
3
INCL
6
30
120
315
1000
1ST ANGLE PROJECTION
FABR 
0,25
1,5
2,5
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
N/A
MASS
DATE
MATERIAL
SCALE
SHEET
4
Power
(kW)
APPROVED
DRAWN BY
1
OF
1
Current
(A)
5
DRAWING NUMBER
2
T Rudman
9/19/2012
NGT 0033
8.7
REV
F
1
100L
150L
2
3
8.7
13
6
Dry Mass
(kg)
20
29
43
Dimensions
(LxDxH) (mm)
540x473x483
915x473x483
1300x473x483
Distance Between
Brackets (mm)
200
555
936
1
2
3
4
5
SANS 151
6
A
IPX4
A
CombiMax (100L & 150L)
222 5
B
B
540
440 3
Ø531
Specifications
Franke CombiMax 400kPa storage water heater/geyser compliant with
IPX4 water protection standard in accordance with IEC 60529 for exterior
installation. Installation shall be accordanceC with SANS10254 and
installed in vertical wall mount/ horizontal floor mount/ horizontal wall
mount position. All electrical connections to conform to SANS10142 -1
and in accordance
117 5the manufacturers installation and maintenance
99 5with
instructions.
4
5
6
A
D
A
L
Capacity (L)
100
150
200
250
E
L (mm)
741
1020
1280
A (mm)
395
685
975
Power
(kW)
B
GENERAL TOLERANCES
2
158 2
175 2
1
MACH 
0,1
0,2
0,3
0,5
0,8
ABOVE
0,5
6
30
120
315
C
3
99 5 117 5
D
420
DO NOT SCALE
D
420
Capacity
Mass (kg)
29
36
47
REVISIONS
F
158 2
175 2
C
540
440 3

INCL
6
30
120
315
1000
1ST ANGLE PROJECTION
FABR 
0,25
1,5
2,5
SCALE
1
OF
150L
2
E
COPYRIGHT NIRO-Plan AG
2
CombiMax Geyser Sizes
Current
(A) DRAWN BY
N/A
MASS
4
DO NOT SCALE
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
MATERIAL
SHEET
100L
8.7
8.7
T Rudman
APPROVED
Dry Mass DATE
(kg)DRAWING NUMBER
1
29
9/19/2012
REV
NGT 0034
F
36
1
Dimensions 5
(LxDxH) (mm)
741x531x540
1020x531x540
Distance Between
Brackets (mm)
395
685
6
E
COPYRIGHT NIRO-Plan AG
CombiMax Geyser Sizes
1ST ANGLE PROJECTION
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
N/A
MASS
APPROVED
DATE
MATERIAL
SCALE
SHEET
4
1
OF
DRAWN BY
1
DRAWING NUMBER
5
T Rudman
9/19/2012
REV
NGT 0034
1
6
F
6
Water
Heaters
Water Heaters
Water
Heaters
1
2
3
4
5
SANS 151
6
A
IPX4
A
CombiMax (200L & 250L)
222 5
B
B
540
440 3
Ø531
Specifications
Franke CombiMax 400kPa storage water heater/geyser compliant with
IPX4 water protection standard in accordance with IEC 60529 for exterior
installation. Installation shall be accordance withCSANS10254 and installed
in a horizontal floor mount position. All electrical connections to conform to
SANS10142 -1 and in accordance with the manufacturers installation and
maintenance instructions
99 5 117 5
4
5
6
A
D
158 2
175 2
C
A
L
Capacity
Capacity (L)
100
150
200
250
E
L (mm)
741
1020
1280
A (mm)
395
685
975
Mass (kg)
29
36
47
Power
(kW)
B
1
2
158 2
175 2
F
MACH 
0,1
0,2
0,3
0,5
0,8
ABOVE
0,5
6
30
120
315
C
3
99 5 117 5
D
420
DO NOT SCALE
E
COPYRIGHT NIRO-Plan AG
CombiMax Geyser Sizes
1ST ANGLE PROJECTION
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
N/A
MASS
MATERIAL
SHEET
4
APPROVED
DATE
7
SCALE
1
OF
DRAWN BY
1
DRAWING NUMBER
5
T Rudman
9/19/2012
REV
NGT 0034
1
6
F
200L
250L
4
DO NOT SCALE
4
E
COPYRIGHT NIRO-Plan AG
Current
CombiMax Geyser
Sizes
17.4
(A)
GENERAL TOLERANCES
REVISIONS
D
420
540
440 3

Water Heaters
INCL
6
30
120
315
1000
1ST ANGLE PROJECTION
FABR 
0,25
1,5
2,5
These drawings and specifications are the
property of NIRO-Plan AG and shall not be
reproduced, copied or transferred to any third
party without the prior written permission of
NIRO-Plan AG, Aarburg, Switzerland
N/A
MASS
MATERIAL
SCALE
SHEET
4
1
Dry MassDRAWN BY
APPROVED
(kg) DATE
DRAWING NUMBER
Dimensions
1
(LxDxH) (mm)5
OF
Distance Between
Brackets (mm)
17.4
T Rudman
47
59
9/19/2012
REV
NGT 0034
1280x531x540
6
975
1
F
1648x531x540
1302
Wall Mounted Installation
Mount bracket to selected side of geyser
Note: Outlet Socket at
uppermost point
1. The unit must be bolted to a wall of sufficient strength to support the full
weight of the filled geyser.
2. The geyser brackets must be removed from the bottom of the geyser and
mounted to the side for horizontal installations. The hot water outlet must
always be at the highest point of the installed geyser.
- 200L and 250L units may not be wall mounted
- Verify unit installation by carefully reading the serial plate
Remove bracket from
bottom position
WALL MOUNT FIXATION FOR GEYSERS
< 200L CAPACITY
300mm MINIMUM
Vacuum Breaker
Hot Water Outlet
Anti Siphon Loop
TP and Safety Valve
(Face towards the Drip Tray)
TP Safety Outlet
(Metallic)
Pressure Control Valve
Lever Valve
Electrical Cover
Drip Tray
Main Pressure
Draincock (Cold Water) Inlet
Cold Water
VERTICAL INSTALLATION FOR GEYSERS < 200L CAPACITY
Lever Valve
Anti Siphon Loop
Pressure Control Valve
300mm MINIMUM
Vacuum Breaker
Hot Water Outlet
TP Safety
Valve
TP Safety Outlet
(Metallic)
Electrical
Cover
Drip Tray
Main Pressure
Cold Water
Draincock (Cold Water) Inlet
HORIZONTAL INSTALLATION
8
Water
Heaters
Water Heaters
Water
Heaters
Other Franke Water Heating Products
Franke Solar Systems
Energy Comsumption: With current power considerations within South
Africa increasingly deteriorating, installing a solar geyser drastically reduces
your energy consumption by up to approximately 70% in certain areas.
ULTRA-FLEX TUBING PROVIDES
EXCEPTIONAL FREEZE
RESISTANCE AGAINST EXTREME
FREEZING ENVIRONMENTS
THROUGHOUT SOUTH AFRICA
Express Heat - Low Pressure Geyser
The Franke Low Pressure solar water heater uses cutting edge solar thermal
technology so efficient that it does not require any connection to mains
electricity. This is achieved through the use of evacuated tube direct water
heating.
CONSUMES ZERO ELECTRICITY
- ZERO OPERATING COSTS
- Low installation costs
- Heats the water even beter than an
electrical geyser
- Even heats water in cloudy conditions
Ecoflow Heat Pump Water Heating
On a mild day a heat pump works so effectively that it uses a third of
the electricity a conventional electrical geyser element uses. This will
substantially reduce your hot water energy demand, saving you money and
taking the load off an already burdened energy supply.
FRANKE HEAT PUMPS ARE
EQUIPPED WITH A USER
FRIENDLY LCD REMOTE
DISPLAY THAT CAN BE PLACED
CONVENIENTLY INSIDE YOUR
HOME. WATER TEMPERATURE
CAN BE ADJUSTED AT THE
TOUCH OF A BUTTON.
9
Important Safety Notice
Your Franke Water Heater is designed to produce hot water. Remember that hot water is dangerous so follow the important instructions in
these guidelines to avoid accidents.
Use a competent plumber to install your Franke Water Heater
In terms of Government notice No.R.1875 of 31 August 1979, no person shall perform the trade of plumbing unless he is a trained plumber or
works under the adequate control of a trained plumber or approved competent person.
Every installation must comply with SANS 10254: This standard covers requirements for the safe installation of new and replacement fixed
electric storage water heaters, complete with all the relevant and applicable safety and hydraulic control units.
Where to find a competent plumber
The Plumbing Industry Registration Board (PIRB) controls plumbing practices and registered plumbers can be found on their website
www.pirb.co.za.
Maintenance in hard-water areas
In areas where hard water may occur, such as in the eastern and southern coastal regions of South Africa, the product lifespan could be
reduced due to build-up of scale. Regular Anode inspection should be carried out by a competent plumber every 6 to 12 months depending on
the severity of the conditions. Contact the Franke call centre at 0861 432 887 for assistance.
Operating your Franke Water Heater
Every Franke Water Heater is supplied with a user manual which contains instructions for the installation of the Franke Water Heater, its
use and maintenance, as well as warnings relating to the risk of injury or damage that could arise from its use. The installation must be
carried out in accordance with the instruction manual. The user manuals can also be downloaded from the Franke Water Heating website
www.frankewhs.co.za.
Product Warranty and the Consumer Protection Act
Franke South Africa (Pty) Ltd warrants the product to be of good quality, in good working order and free from all defects for a period of 5 years
from the date of installation within the regions of South Africa, Namibia and Botswana. Franke’s liability in terms of the warranty is limited to
either repairing or replacing the damaged or defective Franke Water Heater. This warranty is given in addition to any warranty that may apply
in terms of the Consumer Protection Act, 2000.
Standard Terms and Conditions
Details of the standard conditions of sale that apply to the sale of all Franke Water Heaters in South Africa, Namibia and Botswana, unless
otherwise agreed by Franke South Africa (Pty) Ltd, can be obtained from the Franke Water Heating website www.frankewhs.co.za.
10
Important
Safety Notice
Please read carefully. Call the Franke call centre at 0861 432 887 if in doubt or if you need assistance.
FRANKE WATER HEATING SYSTEMS (PTY) LTD
HEAD OFFICE AND SALES
77 Roan Crescent,
Sage Corporate Park North,
Old Johannesburg Road,
Midrand, 1682
South Africa
Call Centre 0861 HEATUP (432887)
Tel +27 11 357 3300
Fax +27 11 357 3302
[email protected]
www.frankewhs.co.za
DISCLAIMER
The information and data supplied in this brochure is based on information believed to be reliable, however it is not binding and inaccuracies may occur. Franke
reserves the right to change specifications and design at any time without notice.
© 2010 by Franke Kitchen Systems (Pty) Ltd. All rights reserved under the Copyright Act of 1987 with amendments. Reproduction of any of the content, full or
partial, is allowed only with the prior written approval of Franke Kitchen Systems (Pty) Ltd. No reasonable requests will be refused provided conditions as laid out
are met.
All information provided in this brochure is for informational purposes only. All information, text, technical drawings and images are the exclusive property of
Franke. The content herein may not be reproduced in whole or part. Any use of the content without written permission from Franke is prohibited.