Download A9GT-50WRS2/A9GT-50WRS4 type Serial

A9GT-50WRS2/A9GT-50WRS4 type
Serial Communication Board
User’s Manual
Thank you for buying the MELSEC-GOT Series
Prior to use, please read both this manual and detailed manual
thoroughly and familiarize yourself with the product.
MODEL A9GT-50WRS2/RS4-U
MODEL
1DM113
CODE
IB(NA)-0800186-B(0406)MEE
MITSUBISHI Graphics Operation Terminal
z SAFETY PRECAUTIONS z
(Always read before starting use)
When using Mitsubishi equipment, thoroughly read this manual and the
associated manuals introduced in the manual. Also pay careful attention to
safety and handle the module properly.
These precautions apply only to the installation of Mitsubishi equipment and the
wiring with the external device. Refer to the user’s manual of the CPU module to
be used for a description of the PLC system safety precautions.
These
SAFETY PRECAUTIONS
classify the safety precautions into two
categories: "DANGER" and "CAUTION".
DANGER
Procedures which may lead to a dangerous condition and
cause death or serious injury if not carried out properly.
CAUTION
Procedures which may lead to a dangerous condition and
cause superficial to medium injury, or physical damage
only, if not carried out properly.
CAUTION may also
Depending on circumstances, procedures indicated by
be linked to serious results.
In any case, it is important to follow the directions for usage.
Store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
[DESIGN PRECAUTIONS]
DANGER
z Do not bundle control lines or communication wires together with main
circuit or power lines, or lay them close to these lines.
As a guide, separate the lines by a distance of at least 100 mm (3.94 inch)
otherwise malfunctions may occur due to noise.
[INSTALLATION PRECAUTIONS]
DANGER
z Before mounting or dismounting this module to or from the GOT, always
shut off GOT power.
Not doing so can cause a module failure or malfunction.
z Before connecting the Communication cable to this module, always shut off
GOT power.
Not doing so can cause a malfunction.
[INSTALLATION PRECAUTIONS]
CAUTION
z Use this module in the environment given in the general specifications of the GOT
User's Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage or
deterioration.
z Insert the communication board securely into the GOT connector.
After it has been inserted, check to make sure that it is not being lifted up.
A faulty connection can lead to faulty input or output.
z When installing this unit to the GOT, fit it to the connection interface of the GOT
and tighten the mounting screws in the specified torque range.
Undertightening can cause a drop, failure or malfunction.
Overtightening can cause a drop, failure or malfunction due to GOT or screw
damage.
z When mounting the communication board, take care not to become injured by the
components that are installed or surrounding materials.
z When mounting the communication board, remove any static electricity
accumulated on your body before engaging in work.
Otherwise, this may result in damage to the board.
[WIRING PRECAUTIONS]
CAUTION
z Plug the communication cable into the connector of the connected module and
tighten the connector mounting screws in the specified torque range.
Undertightening can cause a short circuit or malfunction. Overtightening can cause
a short circuit or malfunction due to the damage of the screws or module.
[STARTUP AND MAINTENANCE PRECAUTIONS]
DANGER
z Before starting cleaning, always shut off GOT power.
Not doing so can cause a module failure or malfunction.
CAUTION
z Do not disassemble or modify any module.
This will cause failure, malfunction, injuries, or fire.
z Do not touch the conductive areas and electronic parts of this module directly.
Doing so can cause a module malfunction or failure.
z Always secure the cables connected to the module, e.g. run them in conduits or
clamp them.Not doing so can cause module or cable damage due to dangling,
moved or accidentally pulled cables or can cause a malfunction due to a cable
contact fault.
z Do not hold the cable part when unplugging any cable connected to the module.
Doing so can cause module or cable damage or a malfunction due to a cable
contact fault.
z Always make sure to touch the grounded metal to discharge the electricity charged
in the body, etc., before touching the module.
Failure to do so may cause a failure or malfunctions of the module.
[DISPOSAL PRECAUTIONS]
CAUTION
z When disposing of the product, handle it as industrial waste.
Manuals
Relevant Manuals
For relevant manuals, refer to the PDF manual stored within the drawing software.
 2001 MITSUBISHI ELECTRIC CORPORATION
1. Overview
This user's manual describes the A9GT-50WRS2 serial communication board
(hereafter referred to as the "A9GT-50WRS2")/A9GT-50WRS4 serial communication
board (hereafter referred to as the "A9GT-50WRS4").
Fitted to the A956WGOT, the A9GT-50WRS2/A9GT-50WRS4 can be connected with
the PLC CPU, computer link unit, microcomputer, other's PLC, or the like by using RS232C/RS-422 connector for peripheral.
The A9GT-50WRS2 is a communication board used for RS-232C communication.
The A9GT-50WRS4 is a communication board used for RS-422 communication.
A956WGOT + A9GT-50WRS2/A9GT-50WRS4
e.g.PLC CPU, Computer link unit
For details of the system configuration, refer to the GOT-A900 Series User's
Manual(GT Works Version5/GT Designer Version5 compatible Connection System
Manual)
After opening the box, check that the following items are present.
Description
Quantity
A9GT-50WRS2 or A9GT-50WRS4
1
Communication board Mounting screw
3
2. Specifications
2.1 Specifications of the A9GT-50WRS2/A9GT-50WRS4
Specifications
Item
A9GT-50WRS2
A9GT-50WRS4
25-pin D-sub(female)
9-pin D-sub(male) inch screw
Communication
meter screw
DDK brand
connector
DDK brand
(17LE-23090-27(D3CC))
(17L-10250-27(D3AC))
Internal current
consumption
12.4
17
(DC5V) [mA]
weight [g] (lb)
42 (0.09)
48 (0.11)
3. Name of the Parts and Outline Dimension Drawing
3)
97.8 (3.85)
3)
1)
2)
3)
88.9 (3.50)
Unit:mm(inch)
Number
1)
2)
3)
Name
Communication cable
connection connector
Connector
Communication board mounting
screw hole
Description
Connector for connection of
communication cable
Connector for connection to the GOT
Screw hole for mounting to the GOT
4. Installation Procedure
1) Open the slot cover on the back of the
A956WGOT.
a) Insert the A9GT-50WRS2
/A9GT-50WRS4.
b) Push down.
2) Mount the A9GT-50WRS2 or the
A9GT-50WRS4 in the slot for mounting
a communication board.
(Align the hole for the attachment
screw on the transmission board with
the hole for the attachment screw on
the transmission board of the GOT
main module, then attach.)
3) Fix by tightening the mounting screws
of the A9GT-50WRS2 or the A9GT50WRS4 within the specified torque
range (36 to 48 N y cm).
4) Close the slot cover.
To remove the unit, reverse the installation procedure.
Be careful not to touch the board inside the GOT main body by hand when
mounting the A9GT-50WRS2 or the A9GT-50WRS4.
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be the cause of
Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products;
damage, secondary damage, accident compensation caused by special factors
unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to
other duties.
For safe use
y This product has been manufactured as a general-purpose part for general industries,
and has not been designed or manufactured to be incorporated in a device or system
used in purposes related to human life.
y Before using the product for special purposes such as nuclear power, electric power,
aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
y This product has been manufactured under strict quality control. However, when installing
the product where major accidents or losses could occur if the product fails, install
appropriate backup or failsafe functions in the system.
Country/Region Sales office/Tel
U.S.A
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway Vernon
Hills, IL 60061
Tel : +1-847-478-2100
Brazil
MELCO-TEC Rep. Com.e Assessoria
Tecnica Ltda.
AV. Paulista 1471, Conj. 308,
Sao Paulo City, Sao Paulo State,
Brazil
Tel : +55-11-283-2423
Germany
Mitsubishi Electric Europe B.V. German
Branch
Gothaer Strasse 8 D-40880 Ratingen,
GERMANY
Tel : +49-2102-486-0
U.K
Mitsubishi Electric Europe B.V. UK
Branch
Travellers Lane, Hatfield, Herts., AL10
8XB,UK
Tel : +44-1707-276100
Italy
Mitsubishi Electric Europe B.V. Italian
Branch
Centro Dir. Colleoni, Pal. Perseo-Ingr.2
Via Paracelso 12, 20041 Agrate B.,
Milano, Italy
Tel : +39-039-6053344
Spain
Mitsubishi Electric Europe B.V. Spanish
Branch
Carretera de Rubi 76-80
08190 - Sant Cugat del Valles,
Barcelona, Spain
Tel : +34-93-565-3131
France
Mitsubishi Electric Europe B.V. French
Branch
25 Boulevard des Bouvets, F-92741
Nanterre Cedex, France
TEL: +33-1-5568-5568
South Africa
Circuit Breaker Industries LTD.
Tripswitch Drive, Elandsfontein Gauteng,
South Africa
Tel : +27-11-928-2000
Country/Region Sales office/Tel
Hong Kong
Ryoden Automation Ltd.
10th Floor, Manulife Tower, 169 Electric
Road, North Point, HongKong
Tel : +852-2887-8870
China
Ryoden Automation Shanghai Ltd.
3F Block5 Building Automation
Instrumentation Plaza 103 Cao Bao Rd.
Shanghai 200233 China
Tel : +86-21-6475-3228
Taiwan
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.RD, Wu-Ku
Hsiang, Taipei Hsine, Taiwan
Tel : +886-2-2299-2499
Korea
HAN NEUNG TECHNO CO.,LTD.
1F Dong Seo Game Channel Bldg.,
660-11, Deungchon-dong Kangsec-ku,
Seoul, Korea
Tel : +82-2-3660-9552
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 ALEXANDRA ROAD #05-01/02,
MITSUBISHI ELECTRIC BUILDING
SINGAPORE 159943
Tel : +65-6473-2308
Thailand
F. A. Tech Co.,Ltd.
898/28,29,30 S.V.City Building,Office
Tower 2,Floor 17-18 Rama 3 Road,
Bangkpongpang, Yannawa,
Bangkok 10120
Tel : +66-2-682-6522
Indonesia
P.T. Autoteknindo SUMBER MAKMUR
Jl. Muara Karang Selatan Block A Utara
No.1 Kav. No.11 Kawasan Industri/
Pergudangan Jakarta - Utara 14440
Tel : +62-21-663-0833
India
Messung Systems Put,Ltd.
Electronic Sadan NO:111 Unit No15,
M.I.D.C BHOSARI,PUNE-411026
Tel : +91-20-712-2807
Australia
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, PostalBag, No 2,
Rydalmere, N.S.W 2116, Australia
Tel : +61-2-9684-7777
HEAD OFFICE : 1-8-12, OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
When exported from Japan, this manual does not require application to the Ministry
of Economy, Trade and Industry for service transaction permission.
Specifications subject to change without notice.
Printed in Japan on recycled paper.