Download User Manual
Transcript
Mini-Phono Pre-Amplifier PP555 www.pyleaudio.com Installation Manual Please read before installing The pyle PP555 mini phono preamp was manufactured to enable you to connect your record players (L) & (R) RCA OUT to the AUX, CD, DVD, Mp3 LINE IN on most Stereo amplifiers. This Unit : • • • • • Converts your phono signal to a line level signal State-of-the-art phono preamp to accommodate magnetic pickups Ultra low-noise audio operational amplifiers offer outstanding sound performance Dedicated RCA and 1/4' output connections DC 12-Volt adapter included Installation: 1. You can power your PP555 by installing a 9V battery in the bottom battery compartment or by plugging the 12-Volt DC Adaptor into the DC jack located under the grounding post. Note Please be sure to adjust Power selector switch accordingly depending on which power source you are using. 2. When connecting your record player to the pre-amp please be sure to connect the ground cable. Most all record players have a double RCA (L) & (R) combined with a ground wire. Failure to connect ground wire properly may result in humming noise. 3. You can choose to connect your amplifier's LINE IN to either the (L) & (R) RCA OUTPUT or the 1/4 " Stereo Jack. We hope you enjoy your Pyle product! If you have any questions please contact: [email protected]