Transcript
1. Installation Procedure 34.5 23.5 1.1 Open a hole on the door frame according to the following diagram. 41.0 60.25 16.5 CCTV & Security Distributor 53.5 .0 11 16 .0 15 14.0 .0 37 23.0 Read the manual before usage and keep for future reference. 41.5 150.0 150.0 AC-355E 136.0 29.5 60.25 86.0 40.0 23.0 or Do e am Fr 109.0 User Manual 69.25 Electric Strike 28.5 39.5 .5 http://www.provisualusa.com 1.2 Connect the power cable and screw the bolts. 2. Wiring 4. Instructions for Usage Red: 12V-DC Positive Black: 12V-DC Negative Ind oo r 3. Product Features Working Voltage: 12V-DC Working Current: innitiation 450mA, working 200mA Size: L×W×H (mm): 450×39.5×28. Color: silver grey Mode: power on lock, power off open Door Edge The dotted line outline the door. Ou td oo Di r of recti clo on sin g 4.1 Electric strike is suitable for door open toward inside. In case the strike is installed on door open toward outside, make sure the peripheral edge of the door is wide enough to cover the exposed part of the strike. 4.2 Select qualified power and cable to ensure the strength of the electric strike. 4.3 The strike is not equipped with door-close time delay. Use with controller if delay is needed. 4.4 The lock can be diversified in case the lock is compatible with the strike. 4.5 It may be difficult to open the door if the lock latch pushes too much inside the strike.