Download MULTIPLE PROTOCOL INTEGRATED ACCESS

DT-9480, DT-4180, DT-4280, DT-4284 User Manual
[ phy = < 232 | v35 | 530 > ]
[ baud = < baud rate > ]
[ enc = < nrz | nrzi > ]
[ ccar = < on | off > ]
[ swcar = <on | off > ]
[ pap = < on | off > ]
[ fill = < mark > | < flag > ]
[ dbits = < 5 | 6 | 7 | 8 > ]
[ parity = < even | odd | none > ]
[ stop = < 1 | 1.5 | 2 ]
[ attn = < 1brk | 2brk | none | char > ]
[ flow = < xon | hw | none > ]
[ cug = [+ | - ] < cug num > ]
[ crfix = < trans | nonnull > ]
[ crlf = < trans | nolf > ]
[ PDDonCR = < on | off > ]
[ crypt = < on | off > ]
[ comment = ”user comment” ]
[ moveto=<New Port Num> ]
[ copyto=<Port Number Range> ]
[ x25dxe=< DTE | DCE > ]
[ x25win=<LAPB Tx Window Size> ]
[ x25t1=< LAPB T1 Timer >]
[ x25n2=< LAPB N2 Retry Counter > ]
vc=<Range> [ vcsvc=< PAD | PASS | ISO
RBP | MAC | SESS> ]
[ vcckt=< SVC | PVC > ]
[ vcwin=<VC Tx Window> ]
[ vcpkt=< 128 | 256 > ]
[ padecho=< ON | OFF > ]
[ paderase=< NONE | BS | <Hex Byte> ]
[ padidle=< #X.3 Ticks > ]
[ padbreak=< NONE | INTR |
RESET | BRKIND > ]
[ padparity=< TRANS | EVEN | ODD >]
[ padcrlf=<NONE | RMT | VC | BOTH>]
[ padfwd=<NONE | CR | CRDROP |
SEMI | ALL > ]
[ padcmap=< ON | OFF > ]
[ PADCUG=[+|-]<CUG Number> ]
[ calling=< DNIC+NTN > ]
[ called=< DNIC+NTN > ]
[ ulen=< UData Length >]
[ udata#=< HEX BYTE >]
[ ext_calling=< OSI NSAP >]
[ ext_called=< OSI NSAP >]
[ hport=<VC Hunt Group TCP Port>]
05/04/05
48
Datatek Applications Inc.