Download Bluetooth Compact Keyboard

USER’S MANUAL
MODEL VP6630
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Notice: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Extension cables are not recommended, if used, they must be shielded
in order to comply with the emission limits.
Page Certification
The term “IC” before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
Declaration of Conformity:
Hereby, SMK-LINK Electronics, Inc. declares that this Wireless Ultra-Mini
Touchpad Keyboard for Mac is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. All trademarks and registered
trademarks mentioned in this document are the property of their respective
owners.
Features and specifications are subject to change without notice.
© 2011 SMK-LINK Electronics, Inc.
Page Hardware Requirements:
•Bluetooth-Hid enabled Tablet or computer.
Operating Systems:
•Windows XP, Vista, 7
•Mac OS X 10.4 or later
•iOS 4 or later
•Android OS 2.1 or later (some of the media hot keys
not supported)
•Linux (some of the media hot keys not supported)
Package Contents:
•SMK-Link Bluetooth Compact Keyboard
•2 x AA Batteries
•User’s Manual
Important, Read Me First:
•Please note that this keyboard is compatible with Bluetooth Hid enabled computers with Windows, Mac and Linux
systems in addition to Bluetooth tablets. However, due to the
many different operating systems used in tablet PC’s including
iPad and iPad 2, the F1 through F12 keys, some of the Fn
shortcut media keys and Ctrl, Alt, Control, Command, Option
compound keys on this keyboard may not be supported by
your tablet.
•The following keys are universal and supported by
all platforms:
oAll alphabets
oThe top row numeric keys
oSymbols
oShift
oCapsLock
oBack Space
oDelete
oThe 4 directional arrow keys
Page Page •Some wireless service providers may have locked out the
tablet’s Bluetooth HID profile, which is required to connect to
any Bluetooth keyboard. If this happens with your tablet,
you may request a patch file from your wireless service
provider to allow connection between your tablet and your
Bluetooth keyboard.
Installing Batteries (Supplied)
•Insert the two AA batteries (included in the package) to the
battery slots. Make sure the positive (+) and negative (-)
ends of the batteries match the polarity markings inside the
battery compartment.
•Snap the battery cover back into position.
•Turn on the power by placing the on/off switch to
“ON” position.
•Your keyboard is ready to be connected to your Bluetooth
Tablet (or computer.)
On/off Switch – turn keyboard power on
ID Button – press to place keyboard
in Discovery mode
•Remove the battery cover from the bottom of the keyboard.
Page Caution
Do not mix new and used batteries in the keyboard. Always replace with 2 batteries of
the same type from the same manufacturer.
Page LED Status Indicators
•This keyboard features 4 LED status indicators.
Note: some of the Tablet OS, ie. Android, may not support the
LED indicator lights.
Num Lock – switch to numeric keys
Caps Lock – switch to capital letters
•Please review the documentation that comes with your system
for any specifics regarding your Bluetooth system, or
consult with your system vendor if you cannot find the
Bluetooth connectivity in your system.
•The ID button is conveniently located at the bottom of the
keyboard. Press it to enter discovery and pairing mode when
you are ready to connect the keyboard to your Bluetooth
Tablet or system.
Connecting to iPad
Pairing – ready to pair with the host
Bat. – battery power low indicator
Setting up Bluetooth Connection
•Before you can use Bluetooth devices for the first time you
must connect your devices through a standard set of
discovery mode and pairing processes.
Page 1.
2.
3.
Power on the keyboard by sliding the on/off switch to the
ON position.
Power on your iPad, tap on “Settings” and choose
“General”. Tap “Bluetooth” and switch ON the
Bluetooth connection.
Press the ID button on the back of the keyboard to enter
discovery mode. The Pairing LED on the keyboard flashes
blue indicating it’s ready to be discovered.
Page 4.
5.
6.
When the SMK-Link Bluetooth Keyboard is listed on the
iPad Bluetooth menu, tap on the keyboard name and the
iPad will prompt you for a PIN. Enter the PIN code
provided by iPad in the pop up window and press ENTER
key on your Bluetooth keyboard.
The Bluetooth keyboard status on the iPad’s Bluetooth
devices menu changes to “Connected”. The keyboard’s
Pairing LED light will go off. Your keyboard is connected to
the iPad.
When the keyboard is powered off, the Bluetooth keyboard
status on the iPad’s Bluetooth devices menu will change to
“Not Connected”. To reconnect, simply power on the
keyboard, wait a few seconds for the iPad to reconnect
to the keyboard and the status will automatically change to
“Connected” and the keyboard is now ready.
3.
4.
5.
Press the ID button on the back of the keyboard to enter
discovery mode. The Pairing LED on the keyboard flashes
blue indicating it’s ready to be discovered.
Follow the instructions on your tablet, select the SMK-Link
Bluetooth Keyboard and your tablet will prompt you for
a PIN. Enter the PIN code as directed and press ENTER key
on your Bluetooth keyboard.
The Bluetooth keyboard is now connected to your tablet and
the keyboard’s Pairing LED light will go off.
Connecting to Other Tablet Systems
1. Power on the keyboard by sliding the on/off switch to the
ON position.
2. Power on your tablet, turn on Bluetooth connection.
Page 10
Page 11
Connecting to Macintosh Systems
1.
2.
3.
4.
Page 12
Power on the keyboard by sliding the on/off switch to the
ON position.
Make sure your computer’s Bluetooth is turned on.
Click the Bluetooth icon located on your desktop or in the
system bar.
Or, click the Apple icon and select System Preferences, then
click on the Bluetooth icon.
5. Select Turn Bluetooth On to enable Bluetooth for your
Macintosh computer if it’s not already on.
Page 13
6. Select Set Up New Device. Bluetooth Setup Assistant screen
will show up. Click Continue.
8. The screen will ask you for the device type. Select
Keyboard from the device list and click Continue.
7. Press the ID button on the back of the keyboard to enter
discovery mode. The Pairing LED on the keyboard flashes
blue indicating it’s ready to be discovered.
9.
Page 14
Your computer will search for Bluetooth devices in the
range (within 33 feet or 10 meters) and list each device
on the screen. Select SMK-Link Bluetooth Keyboard and
click Continue.
Page 15
10.The Wizard will provide you with a passkey. Use your
Bluetooth keyboard to enter the numbers displayed on
the screen, followed by pressing the enter key on
your keyboard.
Page 16
11.On the Conclusion screen, click Quit to exit setup. Your
Bluetooth keyboard is successfully installed.
Page 17
Connecting to MICROSOFT Windows Systems
1.
2.
3.
4. Select and click on Add a Device.
Power on the keyboard by sliding the on/off switch to the
ON position.
Make sure your computer’s Bluetooth is turned on.
From the system tray located at the lower right-hand
corner of your screen click on the Show Hidden Icons
button to reveal the full list of options. Right click on the
Bluetooth icon.
5. Press the ID button on the back of the keyboard to enter
discovery mode. The Pairing LED on the keyboard flashes
blue indicating it’s ready to be discovered.
Page 18
Page 19
6.
The Bluetooth keyboard will be displayed on the screen
when it’s discovered by the computer. Select the keyboard
icon and click Next. (Note: Depending on the system’s
signal strength, it may require more than one try to
discover the keyboard. If needed, repeat these steps until
the keyboard is discovered.)
7. Using the Bluetooth keyboard to type the passkey provided
by your system on the screen, press Enter on your keyboard
and click Next.
8. The system accepts the passkey; your keyboard is now
connected to your Bluetooth computer.
Page 20
Page 21
Using the Bluetooth Keyboard
The keyboard is designed with the following power management
features to conserve battery power:
•Power-saving mode
When carrying the keyboard around, it’s best to turn the power off to conserve battery power. During operation, the
keyboard will automatically enter into power-saving (sleep)
mode after 30 minutes of idle to preserve power. To reactivate
the keyboard, simply press any key to wake up. Please note
that it takes a few seconds for Bluetooth to wake up.
•Reconnect keyboard to the system
•Bluetooth Class 2 Transmission Range
This keyboard is designed with authentic Broadcom Bluetooth
Class 2 chip set with up to 33 ft / 10 meters radius of reliable
transmission range without line of sight. Please make sure the
keyboard is placed within range from the host Tablet or
system. If operation is halted due to keyboard being placed
out of range, connection will resume once the keyboard is
brought within the range from the host Tablet or system.
•Power-low Indicator
The BAT. indicator LED flashes when battery power is low.
Please replace both batteries at your earliest convenience to
prevent power interruption.
When keyboard is reactivated, it automatically reconnects
itself to the Bluetooth Tablet or system. The process may take
up to several seconds depending on the system.
Page 22
Page 23
Fn Shortcut Key Functions
•There are 6 convenient media shortcut keys provided for
productivity enhancement. Press Fn key with one of the
following media keys simultaneously to control 6 of the most
frequently used media functions:
Media Icon

/



)))
(((
Page 24
Media Function
•Please note that while the Fn shortcut keys are fully supported
in Windows and Macintosh OS, they may not function in
iPad and other Tablet systems due to the design of the iOS and the other mobile operating systems for the tablets.
•The F1 through F12 keys on the keyboard are not supported
by iPad and the various Tablet systems due to the nature of
the OS. They are fully supported by Windows and Mac OS.
Previous Track
Play / Pause
Next Track
Mute
Volume Down
Volume Up
Page 25
Product Support
For technical support please contact SMK-LINK Electronics at
http://www.smklink.com/support
Warranty:
SMK-LINK warrants to the original end-user purchaser of the Product (“you”)
that the Product, excluding batteries, will be free from defects in materials or
workmanship under normal use and service for one-year from date of purchase.
Dated invoice or sales receipt is necessary to accompany the Product returned for
warranty service consideration. Any Product repaired or replaced under the terms
of the warranty is covered for the remainder of the original warranty period or
ninety (90) days from the date of service or return shipping, whichever is longer.
If the Product becomes defective in materials or workmanship during the warranty
period, SMK-LINK will, at its option, either repair or replace it with a more current
or upgraded model if the originally purchased model is not available.
arising out of the use or inability to use the product, shall not exceed the original
price paid for the product even if SMK-LINK has been informed of such possibility.
If your Product requires warranty service, you must first contact SMK-LINK Product
Support to receive an RMA Number. The contact information can be found on the
SMK-LINK website:
http://www.smklink.com/support/contactsupport.html
This warranty does not affect your statutory right and you may also have other
rights which vary from state to state. Unless modified in writing, signed by both
you and SMK-LINK, this warranty is understood to be the complete and exclusive
agreement between the parties, superseding all prior agreements, oral or written,
and all other communications between the parties relating to the subject matter of
this warranty.
All trademarks and registered trademarks mentioned in this document are the
property of their respective owners.
This warranty does not cover products which have been subjected to misuse,
accident, physical damage, improper installation, abnormal operation or
handling, neglect, inundation or fire, or when product regulatory label has
been removed, altered or rendered illegible; nor does it cover accessory and
consumable items. In no case shall SMK-LINK be liable for any indirect special,
incidental, or consequential damages based upon breach of warranty, breach of
contract, negligence, strict tort or any other legal theory. Such damages include,
but are not limited to, loss of profits, loss of savings or revenues, inability to use
the product or any associated equipment, cost of capital, cost of any substitute
equipment, facilities or services, claims by third parties other than you, and injury
to property. SMK-LINK’s total liability for damages for any cause related to, or
Page 26
Page 27