Download Dyna Low Rear Suspension Kit Instruction Sheet - Harley

Transcript
INSTRUCTIONS
REV. 7-10-03
-J02909
®
Kit Numbers 54594-03
DYNA LOW REAR SUSPENSION KIT
General
This kit is designed to fit 1993 and later FXD, FXDL and
FXDWG model motorcycles. This kit does not lower FXDL
model motorcycles.
See Service Parts illustration for kit contents.
1WARNING
The rider’s safety depends on the correct installation of
this kit. USE THE APPROPRIATE SERVICE MANUAL
PROCEDURES. If the procedure is not within your capabilities or if you do not have the correct tools, have your
Harley-Davidson Dealer perform the installation.
Improper installation of this kit could lead to an accident
and result in death or serious injury.
1WARNING
Service Parts
i05929
Qty
2
Description
Rear shock
Internal shock absorber components are not repairable
beyond the Service Parts listed on this Instruction Sheet.
Consult your Harley-Davidson dealer if further service is
required.
Installation
The installation procedures for this kit are the same as the
original equipment (OE) installation procedures in the
Service Manual. Refer to the appropriate Service Manual for
the rear suspension system removal and installation
procedures. The OE hardware will be re-used in the kit
installation.
Shock Preload Adjustment
Installation of any accessory suspension components
may affect cornering clearance. This could distract the
rider, causing loss of control and death or serious
injury.
®
NOTES
A Service Manual for your vehicle is available from your
Harley-Davidson dealer.
Part No.
54600-03
Refer to the appropriate Service Manual for spring
adjustment. Spanner wrench, Part Number 94700-52L, is
required for spring adjustment.
Part No. 54594-03
Date 07/03
Dyna Low Rear Suspension Kit