Download axles, axle assemblies & brakes
Transcript
P R E FAC E TABLE OF CONTENTS Axles, Axle Assemblies & Brakes Section A Suspension Section B Tires & Wheels Section C Jacks, Couplers & Winches Section D Towing Section E Cargo Control Section F Chemicals & Coatings Section G Body & Frame Section H Hardware & Locks Section J Actuating Systems Section K Lights & Electrical Section L WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc. P R E FAC E GENERAL TERMS AND CONDITIONS All transactions between you and the Customer (“Customer”) and TexTrail Inc. (“TexTrail”) are subject to the following General Terms and Conditions: 1. All prices are expressed in United States dollars, and do not include freight charges from. Odessa, Texas, Mt. Pleasant, Texas, Houston, Texas, Ocala, Florida, Madill, Oklahoma, Georgia, and Idaho, costs of freight to be paid by Customer. Prices are subject to change without notice, and prices in effect at time of delivery/shipment will apply. Special quotes given on items not shown in TexTrail’s catalog are valid only for the period specified in writing, or 30 days if no period is specified in writing. 2. Unless otherwise agreed to in writing by TexTrail, and Customer, terms are payment by Cash on Delivery (COD). 3. Invoices not paid within 30 days of the invoice date will bear interest at the maximum rate allowed by state law. If unpaid amounts are turned over to an attorney for collection, Customer shall pay all costs of collection, including reasonable attorney’s fees and court costs. 4. Title to items sold and risk of loss and damage shall pass to Customer upon delivery by TexTrail to common carrier or Customer, as the case may be, except that title to (but not risk of loss) shall in the case of items supplied upon credit terms not pass until payment in full has been received by TexTrail. 5. Customer agrees to assume all risks incident to the care, handling, and use of all products purchased; and warrants, by purchase of an item, that Customer is familiar with the item and its proper use. Before using an item, Customer shall give such item reasonable and prudent examination and/or tests to determine the suitability of item for Customer’s intended use. Any item delivered to Customer shall be deemed accepted by Customer unless written notice of defect or nonconformity is received by TexTrail within thirty (30) days after date of delivery. Customer assumes all risk and liability in connection with an item from time of delivery to Customer. 6. Customer agrees to indemnify TexTrail and save TexTrail harmless and free from liability against any and all claims, damages or assertion of liability of every nature whatsoever to persons or property arising out of or in connection with the handling or use of all such products as TexTrail may cause to be delivered to Customer, including but not limited to, any and all claims based on asserted defects of material or workmanship of such products. 7. TEXTRAIL DOES NOT WARRANT ANY PRODUCT, COMPONENTS OR PARTS NOT MANUFACTURED BY TEXTRAIL OR COVERED BY THE WARRANTY OF THE PRODUCT’S MANUFACTURER. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY ABUSE OR MISUSE OF ANY PRODUCT. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY DISASTERS SUCH AS FIRE, FLOOD, WIND, AND LIGHTENING. TEXTRAIL DOES NOT WARRANT DAMAGES CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS TO PRODUCTS SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIALS OR SUPPLIES. TEXTRAIL DOES NOT WARRANT DEFECTS CAUSED BY FAILURE OF CUSTOMER TO FOLLOW INSTRUCTIONS, MAINTENANCE SCHEDULES, OR WARNINGS PROVIDED WITH THE PRODUCT SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIAL OR SUPPLIES. 8. EXCEPT AS OTHERWISE PROVIDED IN WRITING AND SIGNED BY AN AUTHORIZED OFFICER OF TEXTRAIL, TEXTRAIL DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 9. IN NO CASE SHALL TEXTRAIL BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH EXCLUDED DAMAGES INCLUDE BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE PRODUCT (EQUIPMENT, MATERIALS OR SUPPLIES), FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF THIRD-PARTIES INCLUDING THE CUSTOMERS OF CUSTOMER, AND TO DAMAGE/INJURY TO THE PROPERTY. THIS LIMITATION DOES NOT APPLY TO DAMAGES CAUSED BY BREACH OF WARRANTY OF TITLE. SOME STATES/PROVINCES DO NOT ALLOW LIMITS ON WARRANTIES OR ON REMEDIES IN SOME CIRCUMSTANCES. IN SUCH STATES/PROVINCES, THE LIMITS IN THIS PARAGRAPH AND IN THE PARAGRAPH IMMEDIATELY PRECEDING MAY NOT APPLY. 10. Any action for any breach of contract by TexTrail or any breach of warranty must be commenced within 365 days of the date the tender of delivery of the Product (equipment, materials or supplies) is made. 11. This agreement allocates the risk of product failure between TexTrail and the Customer. This allocation is recognized by both parties and is reflected in the price of the goods. The purchaser acknowledges that it has read this agreement, understands it and is bound by its terms. 12. Possession of price lists, brochures, manuals or other TexTrail documents does not constitute an offer by TexTrail to sell at the prices shown. TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS With a trailer in tow, you’re operating a vehicle combination that is longer, heavier, and sometimes wider and taller than you’re used to. So, you’ll have to make some compensating adjustments in your normal driving practices: • Slow Down. Moderate to slow speeds put less strain on your tow vehicle and trailer. • Take a “Shakedown Cruise”. At least one short trial run before your first trip will help. Familiarize yourself with your trailer’s operating characteristics. It also will let you know that the lights, brakes, hitch, etc., are working properly. • Allow Extra Time and Space. You’ll need both when passing and stopping, especially if your trailer is not equipped with brakes. • Check Rear View Mirrors. Doing this frequently will let you know that your trailer is riding properly. We recommend outside rear view mirrors on both sides of your tow vehicle. • Swing Wider. You need to make wider swings at curves and corners because your trailer’s wheels are closer to the inside of a turn than the wheels of your car or truck. • Pass With Extra Care. With trailer in tow, it takes more time and distance to get around a slower vehicle and return to the right lane. • Watch the Wind. To avoid swaying, be prepared for sudden changes in air pressure and wind buffeting when larger vehicles pass from either direction. Slow down a bit and keep a firm hold on your steering wheel. Aim straight down your lane. • Conserve Fuel. You’ll go further on a tank of gas at moderate speeds. Higher speeds increase wind resistance against the trailer and reduce your gas mileage significantly. • Avoid Sudden Starts and Stops. This can cause skidding, sliding, or jackknifing, even if your trailer has brakes. Avoid quick stops while turning. Smooth, gradual starts and stops will improve your gas mileage. • Signal Your Intentions. Let surrounding vehicles know what you intend to do well before you stop, turn, change lanes, or pass. WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc. P R E FAC E TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS CONTINUED... • Shift to a Lower Gear. A lower gear will help ease the load on the transmission and engine when going over steep hills, sand, gravel, or dirt roads. If your vehicle has an “overdrive” gear, shifting out of overdrive to a lower gear may improve the gas mileage. • Always Be Courteous. Make it as easy as possible for faster-moving vehicles to pass you. Keep to the right of the road and prepare to slow down if passing vehicles need extra time to return to their proper lane. • Don’t Tailgate. Allow at least one car and trailer length between you and the vehicle ahead for each 10mph on your speedometer. If a Problem Occurs: Don’t panic. Stay Calm. If you experience a sudden bumping or fishtailing, it may indicate a flat tire. Don’t jam on the brakes or mash the accelerator in an attempt to drive out of it. Instead, come to a stop slowly as you keep driving in as straight line as possible. If conditions permit, coast to a very slow speed and try to avoid braking, except when your wheels are straight ahead and your trailer and tow vehicle are in line with each other. If your trailer begins to fishtail as you accelerate to highway speed, back off the accelerator a bit. This should stop the fishtailing. If it begins again as you increase speed, stop and check your load. The load should be equalized from side to side and forward enough to put a load on the trailer tongue. Redistribute the load as necessary before continuing. HOW TO: RETURN OF MERCHANDISE 1. Merchandise may be returned only after a TexTrail Return Merchandise Authorization (RMA) code has been obtained. To obtain the RMA code, contact your servicing division (numbers listed on right page) with the item, quantity and original invoice number. 2. The RMA code, along with customer name, must be shown on all labels and correspondence concerning the returned merchandise. Please do not mark directly on return product. 3. A minimum 15% restocking charge will be assessed on authorized returns of merchandise that was shipped as ordered by the customer. Adjustment to restocking charge may be made by pending condition of returned merchandise. 4. Returns will not be postage/shipping authorized for products that are special orders. 5. All returns must be prepaid and returned within 30 days of authorization in order to receive credit. 6. Credits may take between one and 10 business days. Customers returning merchandise due to error or mis-ordering can/will be charged a 15% restocking fee. 7. Ship returns to address of shipping division with a copy of invoice and any notes or comments that are necessary to expedite the credit and return. DAMAGES OR SHORTAGES IN SHIPMENT EN ROUTE: When a shipment is received damaged or received short (not specified number of pallets, boxes, bundles, etc.) it is the responsibility of the Customer to file a claim directly with the freight carrier within ten (10) days of the receipt of shipment. ORDER RECEIPT DISCREPANCIES Upon receipt of your order please confirm receipt with packing list and notify TexTrail of any quantity or item discrepancies within three (3) business days. SPECIAL NOTES All users of this product catalog be aware that the information presented is significantly affected by factors within the exclusive knowledge of the user including, among other things, service conditions, trailer or tow vehicle configurations and hitch and coupler arrangements, that the users have independently investigated these factors and have solely relied on those investigations when using this catalog, and that it is the responsibility of the user to adequately specify, evaluate and test its trailer/running gear/tow vehicle combinations. Load ratings are function of the maximum load carrying capacity which is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of tires or wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. Similarly if the load rating capacity of the coupler is lower than the axle/suspension and tire/wheel assembly, the coupler rating becomes the determining trailer capacity factor. TEXTRAIL is constantly upgrading products to better serve the marketplace. Therefore, TEXTRAIL reserves the right to make product improvements, change specifications or prices, and add or delete products and with substitutions at any time without notice. TEXTRAIL warehouses a wide variety of products that my vary by locale, plus laws and regulations may restrict some specific produces delivery in your area. Please contact your local servicing division to verify availability of products. We look forward to providing each customer with reliable trailer parts and trusted brands nation wide and we hope that each time you purchase you are provided with outstanding customer satisfaction. WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc. FENDER LIABILITY FORM East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143 Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519 East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143 Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519 6400102 LH 3.5k 10” x 2-1/4 Elec FSA Assembly 6400103 RH 3.5k 10” x 2-1/4 Elec FSA Assembly 6450135 LH 6K 12” x 2” Electric FSA Assembly 6450136 RH 6K 12” x 2” Electric FSA Assembly DISCOVERY BRAKE CONTROL t%JHJUBMEJTQMBZQSPWJEFTEFUBJMFECSBLFGPSDFJOGPSNBUJPO BOEEJBHOPTUJDT t.PVOUBOZXIFSFJOZPVSWFIJDMF%FQFOEBCMFTPMJETUBUF FMFDUSPOJDTSFRVJSFOPMFWFMJOH t&MFDUSPOJDBDUJWBUJPOFOTVSFTTNPPUITUPQT t/PJOUFSOBMNPWJOHQBSUT t'VMMZBEKVTUBCMFQPXFSBOESBNQUJNF t.BOVBMDPOUSPMBDUJWBUFTCSBLFMJHIUT t$PNQBUJCMFXJUIBOUJMPDLCSBLFTDSVJTFDPOUSPM t0QFSBUFTCSBLFTBYMFT t.PVOUJOHCSBDLFUIBSEXBSFBOEJOTUSVDUJPOTJODMVEFE t-JNJUFEMJGFUJNFXBSSBOUZ .BLF.PEFM #6*$, Enclave $"%*--"$ Escalade :FBST Pkg# 08-11 6500082-02 Including EXT & ESV Including EXT 03-06 2002 6500070-02 6500071-02 Classic Body Only 07-11 03-06 2002 07-07 03-06 99-02 03-06 6500082-02 6500070-02 6500071-02 6500070-02 6500070-02 6500071-02 6500070-02 00-02 6500071-02 09-11 6500082-02 w/Factory Tow Package 07-09 6500072-02 w/Factory Tow Package w/Factory Tow Package Full Size Pickup All Full Size Pickups 97-11 98-09 10-11 95-09 6500072-02 6500072-02 6500083-02 6500072-02 Full Size 94-96 92-93 09-10 92-08 00-05 97-08 02-11 09-10 04-08 97-03 6500073-02 6500080-02 6500075-02 6500073-02 6500073-02 6500073-02 6500073-02 6500074-02 6500073-02 6500073-02 04-04 6500073-02 08-11 05-07 99-04 1997 6500075-02 6500076-02 6500073-02 6500073-02 94-96 6500073-02 5ZQF $)&730-&5(.$ Acadia Avalanche Silverado/Sierra Suburban, Tahoe, Yukon, Yukon XL & Denali Traverse $)3:4-&3 Aspen %0%(& Dakota Durango Ram 1500 Ram Pickup '03% Bronco New Body Style w/Amber Turn Signals Econoline Van Excursion Expedition Explorer F-150 w/Factory Tow Package New Body Style F-150 & F-250 Light Duty F-150 Heritage Heritage Edition Edition F-250 & F-350 Super Duty F-250 & F-350 Heavy Duty F-150, F-250, F-350 Pkg# Description 6500064 Packaged Discovery brake controller :FBST Pkg# 92-93 6500080-02 w/Factory Tow Package w/Factory Tow Package 08-10 05-07 09-11 95-03 6500075-02 6500076-02 6500073-02 6500073-02 w/Factory Tow Package 09-11 06-11 6500081-02 6500081-02 03-07 6500070-02 04-11 6500078-02 05-08 10-11 05-08 6500073-02 6500073-02 6500073-02 2010 03-11 03-07 08-10 6500077-02 6500077-02 6500077-02 6500077-02 w/Factory Tow Package 06-08 10-11 98-11 6500073-02 6500073-02 6500073-02 w/Factory Tow Package 02-08 6500073-02 04-11 05-11 05-11 04-11 6500078-02 6500078-02 6500078-02 6500078-02 07-09 6500082-02 03-11 03-10 03-11 07-11 03-11 6500077-02 6500077-02 6500077-02 6500077-02 6500077-02 .BLF.PEFM 5ZQF '03%DPOUJOVFE F-Series Full Size Truck F-450 & F-550 Super Duty Flex Windstar )0/%" Pilot Ridgeline )6..&3 H2 */'*/*5: QX56 -"/%307&3 LR3 LR4 Range Rover -&964 GX 460 GX 470 LX 470 LX 570 -*/$0-/ Mark LT MKT Navigator .&3$63: Mountaineer /*44"/ Armada Frontier Pathfinder Titan 4"563/ Outlook 50:05" 4Runner Land Cruiser Sequoia Tacoma Tundra Including Sport Sell to customers who haul or tow? The Air Lift Difference t #FTUJODMBTTDVTUPNFSTFSWJDF t #FTUXBSSBOUZBOESJEFHVBSBOUFFJOUIFJOEVTUSZ t )JHIFTUPSEFSmMMSBUFJOUIF JOEVTUSZ t 5IFNPTUBQQMJDBUJPOTUIBUSFRVJSF OPGSBNFESJMMJOH t 5IFNPTUJOOPWBUJWFBOECFTUQFSGPSNJOH DPNQSFTTPSTZTUFNTJOUIFJOEVTUSZ Sell Air Lift air springs and increase your customer’s safety and satisfaction while increasing your profits! Air Helper Springs Before Air Helper Springs After Air Helper Springs Air Lift adjustable air springs work with your existing suspension to give your vehicle more leveling support in the rear when towing or hauling a heavy load. More stability means more safety and a more comfortable ride. LoadLIFTER5000™ RideCONTROL™ Air Lift1000™ t 'JUTNBOZ t 'JUTNBOZ t 'JUTPQFODPJM TQSJOHTPOUIF GSPOUPSSFBS £BOEUPO QJDLVQT WBOT NPUPSIPNFT UPONJOJ QJDLVQT WBOT 467T XJUIMFBGTQSJOHT XJUIMFBGTQSJOHT t 6QUPQPVOETPGMFWFMJOH DBQBDJUZBOEBJSBEKVTUBCMFGSPN UPQTJ NEW / Featured Compressor Systems Compressors and installation hardware included! WirelessAIR™ WirelessONE™ t 6QUPMCTPGMPBEMFWFMJOH DBQBDJUZBOEBJSBEKVTUBCMF GSPNUPQTJ Advanced diagnostics for safety and peace of mind. P/N ARL72000 P/N ARL25870 /FWFSFYDFFENBOVGBDUVSFST(SPTT7FIJDMF8FJHIU3BUJOH It’s easy to put your air helper springs to work with an Air Lift on board air compressor system. With both new and updated models to choose from, it’s never been easier! LoadCONTROLLER™ LoadCONTROLLER™ Single Convenient, economically priced wireless control of your air springs. t 6QUP MCTPG MPBEMFWFMJOH DBQBDJUZBOEBJSBEKVTUBCMFUP DVTUPNUVOFUIFEFTJSFESJEF Dual Free mounting pod included with all LoadController Single or Dual systems! DEFLATE BOTH INFLATE BOTH P/N Standard Duty ARL25850 P/N Heavy Duty ARL25854 DEFLATE LEFT INFLATE BOTH DEFLATE RIGHT P/N Standard Duty ARL25852 P/N Heavy Duty ARL25856 Learn more about Air Lift products today at www.airliftcompany.com (SSZ[LLS 7V^KLY*VH[LK)SHJR (SS:[HPUSLZZ:[LLS/HYK^HYL ;VWVY<UKLYIVK`4V\U[ .H\NL:[LLS >H[LY9LZPZ[HU[ +VVY.HZRL[Z 4VU[O3PTP[LK>HYYHU[`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µFKURPH$%6OXJZKHHOFRYHU 47&/2 µFKURPH$%6OXJZKHHOFRYHU 47&/2 µFKURPH$%6OXJZKHHOFRYHU :KHHO&RYHUVEROWRQ 167 µOXJXQLYHUVDOVLQJOHZKHHOWUDLOHU 167 µOXJVLQJOHZKHHORYDOKDQGKROHV :KHHO&RYHUVVQDSRQ *467 0RVWµOXJVLQJOHZKHHOWUXFNWUDLOHU *47 µ[µOXJGXDOWDQGHPWUDLOHU &KURPH$%6 :KHHO&RYHU /XJ&KURPH $%6+XEFRYHU SERVING THE TRUCKING INDUSTRY WITH QUALITY CARGO CONTROL PRODUCTS Ratchet Straps - 1" & 2" for a wide range of applications Winch Straps 4" x 30' w Flat Hook Strap Winder Sliding Winches and Track Series E Track Horizontal Winch Bars Galvanized & Painted Standard Combination Box End Grade 70 Transport Chain Assemblies & Load Binders Lever Rubber Tarp Straps in Assorted Lengths Ratchet For a complete cargo control assortment see page F-5 #2 TREATED #2 UNTREATED 820050 8250060 2x6x8’ 64 128 8250051 8250061 2x6x10’ 64 128 8250052 8250062 2x6x12’ 64 128 8250053 8250063 2x6x14’ 64 128 8250054 8250064 2x6x16’ 64 128 8250055 8250065 2x6x18’ 64 128 8250056 8250066 2x6x20’ 64 128 8250057 8250067 2x6x24’ 64 128 8250070 8250080 2x8x8’ 48 96 8250071 8250081 2x8x10’ 48 96 8250072 8250082 2x8x12’ 48 96 8250073 8250083 2x8x14’ 48 96 8250074 8250084 2x8x16’ 48 96 8250075 8250085 2x8x18’ 48 96 8250076 8250086 2x8x20’ 48 96 8250077 8250087 2x8x24’ 48 96 East Texas West Texas 2424 W Ferguson Rd 12506 West I-20 East Mt Pleasant, TX 75455 Odessa, TX 75455 888-756-0547 800-333-1745 (Fax) 903-575-0568 (Fax) 432-563-1725 Dimensions 1/2 Bundle Full Bundle Florida Oklahoma 5181 N. US Hwy 441 300 Industrial Rd Ocala, FL 34475 Madill, OK 73446 800-259-8712 877-795-3138 (Fax) 352-629-7134 (Fax) 580-795-3143 Georgia 502 Midway Rd Cordele, GA 31015 877-224-1520 (Fax) 229-273-0955 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 (Fax) 281-405-0519 AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Table Of Contents - Axles, Axle Assemblies & Brakes 2,000 lb Capacity TORFLEX® / D20 Leaf Spring Axle Hub Group Brakes Disc Brakes A-10 A-12 A-13 A-14 3,500 lb Capacity TORFLEX® / D35 Leaf Spring Axle Hub Group Brakes Electric Brakes Disc Brakes 4,400 lb Capacity D44 Leaf Spring Axle Hub Group Brakes 6,000 lb Capacity D60 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes 7,000 lb Capacity D70 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes 7,200 lb Capacity D72 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Disc Brakes 8,000 lb Capacity D80 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes WWW.TEXTRAIL.COM A-1 A-16 A-18 A-20 A-20 A-26 A-28 A-29 A-30 A-31 A-33 A-36 A-37 A-44 A-45 A-51 A-32 A-34 A-36 A-39 A-44 A-45 A-53 A-32 A-35 A-36 A-41 A-55 A-56 A-32 A-35 A-36 A-42 A-58 A-59 A-63 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 9,000 lb - 10,000 lb General Duty Capacity D90 - D100GD Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Disc Brakes 10,000 lb Heavy Duty Capacity D100HD Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes 12,000 lb Heavy Duty Capacity D120 Leaf Spring Axle Hub Group Brakes 15,000 lb Heavy Duty Capacity D150 Leaf Spring Axle Hub Group Brakes 22,500 lb - 27,500 lb Heavy Duty Capacity D200 Leaf Spring Axle Hub Group Brakes Agricultural Hubs and Components Spring Seats Beams Bearing Kits Bearing Protectors Bearings Brake Mounting Flanges Brake Mounting Hardware Center Caps Grease & Oil Seals Grease Caps Heavy Duty Wheel Mounting Hardware Oil Caps Races Retaining Rings Rim Clamps Spindle Parts (Washers, Nuts & Cotter Pins) Spindles Wheel Bolts Wheel Mounting Hardware Wheel Nuts Wheel Studs WWW.TEXTRAIL.COM A-2 A-66 A-68 A-66 A-69 A-72 A-71 A-67 A-66 A-67 A-70 A-72 A-67 A-70 A-72 A-67 A-70 A-72 A-76 A-81 A-85 A-87 A-11 A-90 A-94 A-89 A-87 A-87 A-91 A-88 A-91 A-93 A-91 A-89 A-94 A-94 A-84 A-83 A-92 A-91 A-92 A-92 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES Table Of Contents - Axles, Axle Assemblies & Brakes AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLE ASSEMBLIES This information is intended as a guide for the proper specification and application of running gear, associated components and accessories. We offer a full line of Dexter trailer axles that can be used in many different applications. When specifying any pre-engineered components such as axles, it is the responsibility of the trailer designer to insure compatibility with the vehicle and all of its sub-systems. The maximum load carrying capacity of any assembly is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. As a specific example, if the wheels are rated at 1500 pounds each and are used with other components rated at 3500 pounds per axle, the maximum load capacity is limited to 3000 pounds. If the tires are rated at 1400 pounds each and are used on this assembly, the maximum load carrying capacity is limited to 2800 pounds. For your trailer to perform properly and to protect the cargo you are hauling, trailer axles must be of the correct size, placement and type. The size of your trailer axles is going to depend on the size of your trailer. Contrary to popular belief, bigger is not better. Too many people will fall into the trap of purchasing axles and suspension that are oversized for their particular trailer. So, what size trailer axles do you need? 1. The first thing to do is to consider your load. What will you haul? Add the weight of what you will be hauling to the empty weight of your trailer. Once you have this weight the number and capacity of the axles can be made. If you have 10 to no more than 20 percent in reserve then you are right on target. More than 20 percent will cause the ride to stiffen and become harsh. This can cause damage to your trailer and your load in the long run. 2. What type of spindle do you need? You have two options: Straight or Drop. A straight spindle is used most often and places the floor of the trailer over the wheels. A drop spindle is used when the trailer floor needs to be close to the ground, such as a cattle trailer. You will also need to decide if you want the EZLube option for your grease spindle. EZLube is a bearing lube system offered by Dexter for your axle hubs that will keep your trailer running cooler and prolong the life of your bearings. 3. Next, you must choose your trailer wheel “bolt circle” pattern for the hub of the axle. Basically bolt circle is measured by the imaginary circle that is centered on the axle hub and runs through the center point of the wheel studs. An even number of studs is relatively easy to measure since the wheel studs are directly across from one another, but the odd can be a bit tricky to calculate. For an uneven number of studs place a tape measure on one stud, skip the next stud and measure to the third stud. This will give you a measurement of 4.5”, 5”, 5.5” 4.75” or 6.5”. WWW.TEXTRAIL.COM A-3 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES AXLE ASSEMBLIES 4. Will the trailer require brakes? A single axle non commercial utility trailer does not need brakes while most all double and triple axle trailers do. Consult with your local DMV if you are unsure of the requirements of the state where your trailer will be registered. 5. Now you will need to determine the “hub face” for your axle. Measure the hub face to hub face length. The hub face is where the wheel mounts. Write down the total inches of this axle measurement. If you are building a trailer, consider the space necessary for the tire/wheel to fit the trailer frame. Measure the length from the center of one spring seat to the center of the other. The spring seat is where the leaf spring is mounted. Write down this measurement and note if the spring seats are on the top or bottom of the axle. Hub Face: Distance between hub face to hub face. Track: Distance between tire center to tire center. Spring Center: Distance between center of spring seat to center of spring seat. TexTrail Trailering Tip: AXLES-GETTING STARTED-SETUP AND Adjustment For Proper performance, all new axles should have the following checked at the specific intervals: Wheel Nut Torque: at 10, 25, and 50 miles Brake Adjustment : at 200 and 300 miles Tire Pressure: to manufacturer’s requirements Brake Synchronization: set brake controller per controller manufacturer’s directions WWW.TEXTRAIL.COM A-4 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 2K - 8K - Spring Axles Description Chart Explanation of part # S35545EGN96.25P Straight / 3.5K / 5 on 4.5" / Electric / Grease / Non-Cambered / 96.25 Hub Face / Pads Loose S 35 545 E * G N 96.25 P Description S D DD 20 35 60N 60 70 72 80 T440 440 545 545 546 547 550 555 655 865 868 869 UTG I Y E H F S D SA DA T K Q U R See Electric Options in field below 2 3 4 5 6 7 8 9 These are special options that are only available with the "E" Electric Brake G Z X N C N CU NU XX.xx XX.xx P Straight Spindle 4" Drop Spindle 6" Drop Spindle 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity 4 on 4" Tapped Hub 4 on 4" Studded Hub 5 on 4.5" Hub 5 on 4.5" Hub 5-1/2" Hub Flange 5 on 4.5" Hub 6-1/2" Hub Flange 5 on 4.75" Hub 5 on 5.0" Hub 5 on 5.5" Hub 6 on 6.5" Hub 8 on 6.5" Hub 8 on 6.5" Hub 5/8" Studs (Flange Nuts) 8 on 6.5" Hub 5/8" Studs (6-109) 5 - Spoke Hub Idler WITH Flange Idler WITH OUT Flange Electric Brake Hydraulic Uni-Servo Brake Hydraulic Free-Backing Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Hydraulic Duo-Servo Brake ABS Hydraulic Disc Brake ABS Hydraulic Uni-Servo Brake with Park Hydraulic Free-Backing Brake with Park Hydraulic Duo-Servo Brake with Park UTG Idler Hub UTG Hub & Drum Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Cambered Axle Beam Non-Cambered Axle Beam Cambered Axle Beam / Under Slung Non-Cambered Axle Beam / Under Slung Hubface measured in quarter inches Spring Center measured in quarter inches Pads Loose * This field is ignored if special option (2-9) is not selected. WWW.TEXTRAIL.COM A-5 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S Explanation of part # S10K865EXR74 46-28 Straight / 10K HD / 8 on 6.5" / Electric / Oil Bath Hubs / Standard Suspension / 74" Track Width 46"Spring Center with 5K 3" x 30" Single Slipper Springs Mounted Center with 5K 3” x 30” Single Slipper Springs Mounted 10K 865 S E * X R 74 46 -28 A S XX* NS 01 33 28 30 ABS Standard 9,000 lb Axle Capacity 10,000 lb General Duty Axle Capacity 10,000 lb Heavy Duty Axle Capacity 12,000 lb Axle Capacity 15,000 lb Axle Capacity 8 on 6.5" Hub 8 on 6.5" Low Profile Hub 8 on 6.5" Hi Profile Hub 8 on 275mm Idler WITH Flange Electric Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Air Service Chamber Air Spring Brake Hydraulic Duo-Servo Brake with Park Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves No Slack Manual Slack Auto Slack Standard Spring Seats Adjustable Spring Seats Hub Face / Track Width measured in quarter inches Spring Center measured in quarter inches Pads Loose Springs Mounted No springs 9K 10K GD 10K HD 12K 32 15K 9K 10G 10K 12K 15K 865 86L 86H 87M I E H D A B T See Electric Options in field below Electric Brake 2 3 4 5 6 7 8 9 These are special options that are only available with the "E" Electric Brake X M T R J XX.xx XX.xx P * Description * This field is ignored if special option (2-9) is not selected. WWW.TEXTRAIL.COM A-6 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 9K - 15K - Spring Axles Description Chart AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 0.9K - 10K Heavy Duty - Torflex® Axles Description Chart Explanation of part # 10TH35545EZQ94.25 79.25 TF10 / 22.5UP / 3.5K / 5 on 4.5" / Electric / E-Z Lube / Low-Pro Side Mount / 94.25 HF 79.25 OB 10 TH 35 545 E * Z Q 94.25 79.25 8 9 10 11 12 13 13G 13D TA TE TB TC TD TG TH 09 20 35 52 60 70 72 80 90 10 T440 440 545 545 546 547 550 555 655 865 868 869 UTG I Y E H F S D SA DA T K Q U R See Electric Options in field below 2 3 4 5 6 7 8 9 These are special options that are only available with the "E" Electric Brake G Z X N B L M Q BR LR MR QR XX.xx XX.xx Description Torflex® 8 0.9K Torflex® 9 2K Torflex® 10 3.5K Torflex® 11 5.2K and 6K Torflex® 12 7K and 12V 7.2K Torflex® 13 8K Torflex® 13G 9K or 10K General Duty Torflex® 13D 10K Heavy Duty Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex 0 Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm 900 lbs Axle Capacity 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity 9,000 lbs Axle Capacity 10,000 lbs Axle Capacity 4 on 4" Tapped Hub 4 on 4" Studded Hub 5 on 4.5" Hub 5 on 4.5" Hub 5-1/2" Hub Flange 5 on 4.5" Hub 6-1/2" Hub Flange 5 on 4.75" Hub 5 on 5.0" Hub 5 on 5.5" Hub 6 on 6.5" Hub 8 on 6.5" Hub 9/16" Studs 8 on 6.5" Hub 5/8" Studs (Flange Nuts) 8 on 6.5" Hub 5/8" Studs (6-109) 5 - Spoke Hub Idler WITH Flange Idler WITH OUT Flange Electric Brake Hydraulic Uni-Servo Brake Hydraulic Free-Backing Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Hydraulic Duo-Servo Brake ABS Hydraulic Disc Brake ABS Hydraulic Uni-Servo Brake with Park Hydraulic Free-Backing Brake with Park Hydraulic Duo-Servo Brake with Park UTG Idler Hub UTG Hub & Drum Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Outside Mounting Bracket measured in quarter inches * This field is ignored if special option (2-9) is not selected. WWW.TEXTRAIL.COM A-7 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 35 9 20 35 44 52 60N 60 70 72 80 D 84F Z C 91.25 P S D DD TA TE TB TC TD TG TH BT BTF 84F 42F DX G Z X N C N CU NU B L M Q BR LR MR QR XX.xx XX.xx P WWW.TEXTRAIL.COM A-8 Description 900 lbs Axle Capacity 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 4,400 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) Torflex® 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity Straight Spindle 4" Drop Spindle 6" Drop Spindle Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex 0 Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm 2,000 lb Capacity Beam 2,000 lb Capacity Beam with Flange 3,500 lb Axle Capacity with Flange 5,200 - 7,000 lb Capacity Beam with Flange 7,200 - 8,000 lb Capacity Beam Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Spring Beam Options Cambered Axle Beam Non-Cambered Axle Beam Cambered Axle Beam / Under Slung Non-Cambered Axle Beam / Under Slung Torflex® Options Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Spring Center or Outside Mounting Bracket measured in quarter inches Pads Loose 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 0.9K - 8K - Spring and Torflex® Axle Beams Description Chart Explanation of part # 35D84FZC91.25P 3.5K / 4" Drop / 84F Spindle w/ Brake Flange / E-Z Lube / Cambered / 91.25 HF / Pads Loose AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 9K - 15K Heavy Duty - Spring Axle Beams Description Chart Explanation of part # 10GSR74 48.5 10K GD / Std Hub & Brake / Std Supsension / 74"HF / 48.5"SC 10G S R 74 48.5 9K 10G 10K 12K 15K S A R J XX.xx XX.xx P Description 9,000 lb Beam Capacity 10,000 lb General Duty Beam Capacity 10,000 lb Heavy Duty Beam Capacity 12,000 lb Beam Capacity 6,000 lbs Axle Capacity (.191 tube thickness) Torflex® Standard Hub & Brake Air Standard Spring Seats Adjustable Spring Seats Hubface measured in quarter inches Spring Center measured in quarter inches Pads Loose 9K - 10K Heavy Duty - Torflex® Axle Beams Description Chart Explanation of part # 10KTDEXB80 55 10K HD / Zero Degree Arm / Electric / Oil Bath / Hi Pro Top Mount / 80"HF / 55"OB 10K TD E X B 80 55 10G 10K TA TE TB TC TD TG TH I E EF H D G Z X N B L M Q BR LR MR QR XX.xx XX.xx WWW.TEXTRAIL.COM A-9 Description 10,000 lb General Duty Beam Capacity 10,000 lb Heavy Duty Beam Capacity Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex Zero Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm Idler WITH Flange Electric Brake Electric Brake with FSA (Forward Self-Adjusting) Hydraulic Uni-Servo Brake Hydraulic Disc Brake Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Outside Mounting Bracket measured in quarter inches 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 2,000 lb Axles & Axle Components 2,000 lb. Spring Axles* 2,000 lb. Leaf Springs Capacity Part # Ref# Type Double Eye 1.75" x 20-1/4" 3 Leaf 850 lb. 9150071 72-16 Idler Double Eye 1.75" x 20-3/8" 3 Leaf 1,000 lb. 9150006 1020 Idler Straight Idler Straight w/ EZ-Lube 6151001 6151013 Idler 4" Drop 6151006 6151018 Idler 4"Drop w/ EZ-Lube 6151007 6151019 Description Part # Double Eye 1.75" x 23-1/4" 3 Leaf 1,750 lb. 9150012 93180 Double Eye 1.75" x 24" 3 Leaf 1,250 lb. 9150072 75-6 Double Eye 1.75" x 25-1/4" 3 Leaf 1,250 lb. 9150073 SW722 Double Eye 1.75" x 25-1/4" 3 Leaf 1,750 lb. 9150013 SW3 500 lb. 9150025 WIC2 Electric 7 x 1-1/4" Slipper 1.75" x 24-1/4" 2 Leaf Slipper 1.75" x 24-1/4" 3 Leaf Slipper 1.75" x 24" 4 Leaf 545** 6151012 440 545** 6151002 6151014 750 lb. 9150031 WIE3 Electric Straight 1,000 lb. 9150007 WIH4 Electric Straight w/ EZ-Lube 6151003 6151015 Electric 4" Drop 6151008 6151020 Electric 4"Drop w/ EZ-Lube 6151009 6151021 Slipper 1.75" x 24-1/4" 5 Leaf 1,300 lb. 9150009 WI5 Slipper 1.75" x 27" 2 Leaf 1,000 lb. 9150070 72-2 Slipper 1.75" x 27-3/8" 2 Leaf 1,000 lb. 9150065 WID2 Slipper 1.75" x 27-3/8" 3 Leaf 1,500 lb. 9150011 WIF3 Slipper 1.75" x 27-3/8" 4 Leaf 440 6151000 1,750 lb. 9150015 WIG4 2,000 lb. Hanger Kits Hydraulic 7 x 1-3/4" Single-Servo 440 545** Hydraulic Straight 6151004 6151016 Hydraulic Straight w/ EZ-Lube 6151005 6151017 Hydraulic 4" Drop 6151010 6151022 Hydraulic 4"Drop w/ EZ-Lube 6151011 6151023 Description Part # Ref# Double Eye Single Axle 9100063 APS1 Double Eye Single Axle 9100116 APS2 Double Eye Single Axle 9100087 APS3 Double Eye Single Axle 9100071 APS4 Double Eye Single Axle 9100117 APS5 Slipper Single Axle 9100007 APS3SE Double Eye Tandem Axle 9100064 APT1 Double Eye Tandem Axle 9100041 APT3 Double Eye Tandem Axle 9100060 APT4 Electric 7 x 1-1/4" Double Eye Tandem Axle 9100061 APT5 Electric 6152002 6152008 Electric w/ EZ-Lube 6152003 6152009 2,000 lb. U-Bolt Kits Description Part # Ref# 3/8" Dia 1-3/4" Round 4.03" Long 9100052 APUBR-10 9/16" Dia 2" Square 5-1/2" Long 9150046 9/16" Dia 1-3/4" Square 5-1/2" Long *Axles come with 1-1/16" Spindles and either 1-3/4" OD tube on straight and 2-3/8" tube OD on drop spindles. TF# 9 - 2,000 lb. Torflex® Axles*** Type Idler Idler Idler w/ EZ-Lube Part # 440 6152000 6152001 440 Hydraulic 7 x 1-3/4" Single-Servo 545** 6152006 6152007 545** 440 545** Hydraulic 6152004 6152010 APUB9 Hydraulic w/ EZ-Lube 6152005 6152011 9150054 APUB6 9/16" Dia 1-3/4" Square 5" Long 9100042 APUB3 ** Please specify 545 Bolt Pattern in either 5-1/2" Hub Flange for 8-12" wheels OR 6-1/2" Hub Flange for 12-15" wheels. 2K axles are standard WITHOUT Brake Flange *** Torflex axles are standard low profile and top mounted. 3/8" Dia 1-3/4" Square 4-1/2" Long 9100053 APUB3 2,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Minimum Recommended Straight 11.50" 14.75" Maximum 15.25" Drop 15.25" 16.00" 18.00" TF# 9 - 2,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum 13.00” 21.75” Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information. WWW.TEXTRAIL.COM A-10 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Axle Beams 2,000 lb. Spring Beams* Type 7,200 lb. Spring Beams* Part # 2,000 lb. Torflex Beams* Straight 42F Grease Beam 6100510 Type 6100500 Straight 42F EZ-Lube Beam 6100511 Torflex #9 Grease Beam 6100534 Straight BT EZ-Lube Beam 6100501 4" Drop 42F Grease Beam 6100530 Torflex #9 EZ-Lube Beam 6100535 4" Drop BT Grease Beam 6100518 4" Drop 42F EZ-Lube Beam 6100531 4" Drop BT EZ-Lube Beam 6100519 Straight BT Grease Beam 8,000 lb. Spring Beams* 3,500 lb. Spring Beams* Torflex #10 Grease Beam 6100537 6100512 Torflex #10 EZ-Lube Beam 6100536 Torflex #10 EZ-Lube V-Bent 6100920 6100500 Straight DX EZ-Lube Beam 6100513 Straight 84F EZ-Lube Beam 6100503 4" Drop DX Oil Bath Beam 6100532 4" Drop 84F Grease Beam 6100520 4" Drop DX EZ-Lube Beam 6100533 6100521 9,000 lb. Spring Beams* 4,400 lb. Spring Beams* Standard Oil Bath Beam Straight 84F Grease Beam 6100008 Straight 84F EZ-Lube Beam 6100009 Straight 42F EZ-Lube Beam .191Wall Standard Oil Bath Beam 6100505 6100524 4" Drop 42F EZ-Lube Beam .191Wall 6100525 Air Beam 6100506 Straight 42F EZ-Lube Beam 0.250 Wall 6100507 4" Drop 42F Grease Beam 0.250 Wall 6100526 4" Drop 42F EZ-Lube Beam 0.250 Wall 6100527 6,000 lb. Torflex Beams* Torflex #11 Grease Beam 6100538 Torflex #11 EZ-Lube Beam 6100539 7,000 lb. Spring Beams* 6100517 Standard Oil Bath Beam Air Beam Torflex #12 Grease Beam 6100540 Torflex #12 EZ-Lube Beam 6100541 7,200 lb. Torflex Beams* 6100516 12,000 lb. Heavy Duty Spring Beams* 6,000 lb. Heavy Duty Spring Beams* Straight 42F Grease Beam 0.250 Wall 6100515 10,000 lb. Heavy Duty Spring Beams* 6100504 4" Drop 42F Grease Beam .191Wall 6100514 Beam 10,000 lb. General Duty Spring Beams* Standard Oil Bath Beam 6,000 lb. Regular Duty Spring Beams* Straight 42F Grease Beam .191Wall 3,500 lb. Torflex Beams* Straight DX Oil Bath Beam Straight 84F Grease Beam 4" Drop 84F EZ-Lube Beam Part # Torflex #12V Grease Beam 6100542 Torflex #12V EZ-Lube Beam 6100543 8,000 lb. Torflex Beams* 6100394 6100395 15,000 lb. Heavy Duty Spring Beams* Standard Oil Bath Beam 6100551 Air Beam 6100393 * Refer to specific axle page for measurement requirements between Hub Face and Spring Center or Outside Bracket. Torflex #13 Oil Bath Beam 6100544 Torflex #13 EZ-Lube Beam 6100545 10,000 lb. General Duty Torflex Beams* 9,000 lb. Spring Beams* Standard Oil Bath Beam 7,000 lb. Spring Beams* 6100514 10,000 lb. General Duty Spring Beams* Straight 42F Grease Beam 6100508 Straight 42F EZ-Lube Beam 6100509 Standard Oil Bath Beam 6100515 10,000 lb. Heavy Duty Spring Beams* 4" Drop 42F Grease Beam 6100528 Standard Oil Bath Beam 6100516 4" Drop 42F EZ-Lube Beam 6100529 Air Beam 6100517 12,000 lb. Heavy Duty Spring Beams* Torflex Features Rubber Torsion Suspension Axles Torflex Features • • • • • • • • • • • Independent wheel suspension and self-clamping action Rubber cushioning eliminates metal-to-metal contact Less transfer of road shock for better cargo protection Heat-treated solid steel inner bar Forged torsion arm for maximum strength Rubber cords compounded for dependability Axle can be used as a load carrying cross member Easy installation with less overall maintenance Low profile availability for maximum road clearance Single or tandem axle assemblies Five-year limited warranty on suspension system Standard Oil Bath Beam 6100394 Air Beam 6100395 15,000 lb. Heavy Duty Spring Beams* Standard Oil Bath Beam 6100551 Air Beam 6100393 The Torflex suspension system is a torsion arm type suspension which is completely self contained within the axle tube. It attaches directly to the trailer frame using brackets which are an integral part of the axle assembly. The Torflex axle provides improved suspension characteristics relative to leaf spring axles through the unique arrangement of a steel torsion bar surrounded by four natural rubber cords encased in the main structural member of the axle beam. The wheel/hub spindle is attached to a lever, called the torsion arm, which is fastened to the rubber encased bar. As load is applied, the bar rotates causing a rolling/compressive resistance in the rubber cords. This rotating action provides the same functionality as conventional sprung axles with several operating advantages including independent suspension. Except for periodic inspection of the fasteners used to attach the Torflex axle to the vehicle frame, no other suspension maintenance is required on Torflex axles. They are, of course, subject to the same maintenance and inspection procedures regarding brakes, hubs, bearings, seals, wheels, and tires as outlined in the Dexter Operation Maintenance Service Manual. Torflex Specifications • • • • • Bearing lubrication options: E-Z Lube, Nev-R-Lube, or Oil (7,000 lbs. and above) 600 lbs. - 10,000 lbs. capacities, manufactured to the customer’s exact requirements Ride heights available: 45 deg down, 22.5 deg down, 10 deg down, 0 deg, 10 deg up, & 22.5 deg up High and low profile brackets with optional mounting brackets available CAUTION: Triple axle assemblies are not recommended for Torflex axles WWW.TEXTRAIL.COM A-11 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES BT8 & BT16 (2K) Replacement Hub & Hub and Drum Components BT8 GREASE LUBE PARTS Item Part # Ref # 1 7700060 2 3 HUBS Description Item 12192TB Double Lip Seal 1.983" OD x 1.249" ID Hubs & Drums 7800007 L44643 Inner / Outer Bearing Cone 21 7800046 L44610 Inner / Outer Bearing Cup 7800037-01 BT8 Bearing Kit (Includes Item 1 - 5) Part # Ref # Description Bolt Circle 7650009 8-173-16 ½” Stud, Elec Brks Only 4 on 4.00 7650029 8-257-5 ½” Stud, Elec Brks Only 5 on 4.50 7650010 8-173-15 ½” Tapped, Elec Brks Only 4 on 4.00 7650207 8-91-4 ½” Tapped 4 on 4.00 22 Plain Hubs BT16 GREASE LUBE PARTS 23 Item Part # Ref # Description 7650012 8-91-5 ½” Stud 4 on 4.00 1 7700083 10-60 Double Lip Seal 1.987" OD x 1.5" ID 7650071 8-259-5 ½” Stud 8"-12" Wheels 5 on 4.50 2 7800010 L44649 Inner / Outer Bearing Cone 7650001 8-258-5 ½” Stud 13"-15" Wheels 5 on 4.50 3 7800046 L44610 Inner / Outer Bearing Cup 7800038-01 24 BT8 HUBS COMPLETE BT 16 Bearing Kit (Includes Item 1 - 5) Includes bearings, seal, cap & lug nuts. 4 8750003 19-2 Cotter Pin Item 5 8750040 5-101 Tang Washer EZ Lube (Before 2002) Hubs & Drums Part # Ref # Description Bolt Circle 6 8750005 6-1 Spindle Nut 7650009-04 BT8 H-D Kit 4 on 4.00 7 7700024 21-3 Grease Cap 1.99" 7650029-04 BT8 H-D Kit 5 on 4.50 8 7700025 21-41-1 Grease Cap for EZ Lube 1.99" Plain Hubs 9 7700053 85-1 Rubber Plug for EZ Lube 7650012-04 BT8 Hub Kit 4 on 4.00 10 8750046 5-151 Spindle D-Washer 1" ID EZ Lube (Before 2002) 7650071-04 BT8 5.5" Hub Kit 5 on 4.50 11 8750033 5-23 Spindle D-Washer 1" ID EZ Lube (After 2002) 7650071-05 BT8 6.5" Hub Kit 5 on 4.50 12 8750006 6-191 Spindle Special Jam Nut EZ Lube (After 2002) 13 8750030 6-190 Spindle Nut Retainer EZ Lube (After 2002) BT16 HUBS COMPLETE Item STUDS & WHEEL NUTS Part # Ref # Description Bolt Circle Hubs & Drums Item Part # Ref # Description 7650009-02 8-173-91 BT16 H-D Kit 4 on 4.00 14 7700008 7-40 ½ -20 Pressed Wheel Stud 7650009-03 8-173-92 BT16 EZ Lube H-D Kit 4 on 4.00 15 7700133 7-246 ½ -20 Pressed Wheel Stud 7650029-02 8-257-91 BT16 H-D Kit 5 on 5.00 16 7700045 6-80 ½ -20 60 Deg Cone Nut 7650029-03 8-257-92 BT16 EZ Lube H-D Kit 5 on 5.00 17 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 18 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 7650207-02 8-91-90 BT16 Hub Kit Tapped 4 on 4.00 19 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Steel Capped 7650012-02 8-91-91 BT16 Hub Kit 4 on 4.00 7650012-03 8-91-93 BT16 Hub EZ Kit 4 on 4.00 7650071-02 8-259-91 BT16 5.5" Hub Kit 5 on 4.50 7650071-03 8-259-93 BT16 5.5" Hub EZ Kit 5 on 4.50 Description 7650001-02 8-258-91 BT16 6.5" Hub Kit 5 on 4.50 7650001-03 8-258-93 BT16 6.5" Hub EZ Kit 5 on 4.50 Plain Hubs 7 x 1¼ BRAKES Item 20 Part # Ref # 6400026 23-47 LH Electric Assembly 6400027 23-48 RH Electric Assembly 6400062 23-398 LH Hyd Uni-Servo Assembly 6400063 23-399 RH Hyd Uni-Servo Assembly WWW.TEXTRAIL.COM A-12 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 7” Brake Assemblies & Components 7" x 1 1/4" Electric Brake Item Part # 6400026 Ref # 23-47 Qty/Brk Description 1 LH Electric Assembly 1 RH Electric Assembly 6400027 23-48 1 6450170-01 71-57 1 2 6450004 71-325 1 6450005 71-326 1 6450221 71-361 1 3 6450303 46-23 2 4 6450304 46-24 1 5 6450305 46-114 2 6450006 71-323 1 6 6450302 46-22 1 7 6450301 43-21 1 8 6450075 71-45 1 9 6450038 46-7 1 10 6450181 6-17 4 11 6450241 7-41 4 12 6450099 27-5 1 WWW.TEXTRAIL.COM Magnet Kit LH Actuating Arm RH Actuating Arm Brake Spring Kit (Contains Items 3-6) Shoe Hold Down Clip Retractor Spring Shoe Centering Spring Adjuster Screw and Spring (Contains Items 6-7) Adjuster Screw Spring Adjuster Screw Shoe & Lining Kit Adjuster Plug 7/16"-20 Brake Mounting Nut 7/16"-20 x 0.89" Brake Mounting Pressed Bolt Wire Clip A-13 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES WWW.TEXTRAIL.COM A-14 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Rotary Style 8" Integral 5 on 4.5" Bolt Pattern Fits all 4-Bolt Brake Flange with BT16 Spindle For 10" Wheels REPLACEMENT PARTS Kits contain parts for one complete axle Other Replacement Parts Item Part # Ref # 1 6450558 DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 Description Item 2 6450556 DBCMHBS Stainless Steel Sleeve 16 7700083 10-60 3 6450560 DBCMHBSB Rubber Bushing for Guide Bolt 17 7800010 L44649 Inner Bearing Cone 4 6450552 DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF 18 7800046 L44610 Inner Bearing Cup 5 6450553 DBCNPTADPBBS Bleed Port / Screw Assy (contains next two items) 19 7800046 L44610 Outer Bearing Cup 6451000 DBCNPTBBS Bleed Screw Port 1/4"-28 20 7800010 L44649 Outer Bearing Cone 6451001 DBCNPTADP Bleed Screw Adapter 1/8" 21 8750033 5-23 Spindle D-Washer 1" 6450538 DBC2258E 6450539 DBC2258SCAD Caliper comes w/ items 1-9 6 6450529 DBC225SS 7 6450548 DBC225PISTONSS 8 6450550 DBC225SEAL 9 6450551 DBC225BOOT 10 6450536 CMB10I 6450537 CMB10ISCAD 11 12 6450630 DBC225SMPAD 6450620 DBC225CERMPAD 6450515 ROTOR82 Part # Ref # Description 16-17 & 20-27 Not Included in Kits Below Double Lip Seal 1.987" OD x 1.5" ID 22 8750005 6-1 Spindle Nut Caliper E-Coat 23 8750003 19-2 Cotter Pin Caliper Silver Cadmium Plated 24 7700024 21-3 Grease Cap 1.99" Caliper Stainless Steel 25 7700025 21-41-1 2-1/4" Stainless Steel Piston 26 7700053 85-1 Rubber Plug EZ Lube Grease Cap EZ Lube 1.99" Piston Rubber Seal 27 6450565 LB169 ½ -20 x 1.69 Pressed Wheel Stud Rubber Dust Boot 7700109 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud Caliper Mounting Bracket E-Coat 6450739 LB2.0 ½ -20 x 2" Long Pressed Wheel Stud Caliper Mounting Bracket SCD 7700142 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud ½ -20 60 Deg Cone Nut 7700045 6-80 Brake Pads (Ceramic) Brake Pads (Semi-Metallic) 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 545 8" Rotor Standard Automotive Finish 7700045 6-80 ½ -20 60 Deg Cone Nut 545 8" Rotor E-Coat 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 545 8" Rotor Silver Cadmium Plated 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6450516 ROTOR82E 6450517 ROTOR82SCAD 6450720 HUB/SPACERBT16E 545 8" Hub Spacer BT-16 Spindle E-Coat 6450721 HUB/SPACERBT16SCAD 545 8" Hub Spacer BT-16 Spindle SCAD 28 Mounting Hardware (Not Included in Kits Below) Item Part # Ref # Description 13 6450241 7-75 7/16"-20 x 1-1/4" Grade 8 Bolt 14 7030116 5-8 7/16" Lock Washer 15 6450181 6-17 7/16"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware Rotor Only Kits (Includes Items 1 thru 12 and Races) Item Part # Ref # 6450449 2RCMHS82 Axle Kit, STD Rotor, E-Coat Caliper Description 6450450 2RCMHS82E Axle Kit, E-Coat 6450451 2RCMHS82SCAD Axle Kit, SCAD Rotor, E-Coat Caliper WWW.TEXTRAIL.COM A-15 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 3,500 lb Axles & Axle Components 3,500 lb. Leaf Springs 3,500 lb. Spring Axles* Description Capacity Part # Ref# Type Part # Double Eye 1.75" x 20-1/2" 4 Leaf 1,400 lb. 9150049 72-13 Idler 545 Double Eye 1.75" x 23-1/8" 3 Leaf 1,750 lb. 9150057 72-9 Idler Straight 6151100 6151120 6151137 6151153 6151170 Double Eye 1.75" x 23-1/8" 4 Leaf 2,000 lb. 9150064 72-18 Idler Straight w/ EZ-Lube 6151101 6151121 6151138 6151154 6151171 Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150051 72-25 Idler 4" Drop 6151110 6151129 6151145 6151162 6151181 Double Eye 1.75" x 25-1/4" 3 Leaf 1,750 lb. 9150013 SW3 Idler 4"Drop w/ EZ-Lube 6151111 6151130 6151146 6151163 6151182 Double Eye 1.75" x 25-1/4" 4 Leaf 1,750 lb. 9150014 SW4B Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150016 SW4 Electric 10 x 2-1/4" 545 5475 550 555 655 Slipper 1.75" x 30-1/4" 3 Leaf 1,500 lb 9150011 WIF3 Electric Straight 6151102 6151122 6151139 6151155 6151172 Slipper 1.75" x 30-1/4" 4 Leaf 2,000 lb. 9150015 WIG4 Electric Straight w/ EZ-Lube 6151103 6151123 6151140 6151156 6151173 n/a n/a n/a n/a 6151174 Electric 4" Drop 6151112 6151131 6151147 6151164 6151183 Electric 4"Drop w/ EZ-Lube 6151113 6151132 6151148 6151165 6151184 Electric Straight w/ Nev-R-Lube 3,500 lb. Hanger Kits Description Double Eye Single Axle 1-1/4" Hanger Part # Ref# 9100063 APS1 5475 550 555 655 Double Eye Single Axle 9100116 APS2 Hydraulic 10 x 2-1/4" Single-Servo 545 5475 550 555 655 Double Eye Single Axle 9100087 APS3 Hydraulic Straight 6151106 6151125 6151141 6151157 6151175 Double Eye Single Axle 9100071 APS4 Hydraulic Straight w/ EZ-Lube 6151107 6151127 6151142 6151160 6151177 Double Eye Single Axle 9100117 APS5 Hydraulic Straight w/ Nev-R-Lube n/a n/a n/a n/a 6151178 Double Eye Tandem Axle 9100064 APT1 Hydraulic 4" Drop 6151116 6151133 6151149 6151166 6151185 Double Eye Tandem Axle 9100041 APT3 Hydraulic 4"Drop w/ EZ-Lube 6151117 6151134 6151151 6151168 6151187 Double Eye Tandem Axle 9100060 APT4 Double Eye Tandem Axle 2.625" Strap 9100061 APT5 Hydraulic 10 x 2-1/4" Freeback 545 5475 550 555 655 Double Eye Triple Axle 9100016 APTT3 Hydraulic FB Straight 6151108 6151126 6151143 6151159 6151176 Double Eye Triple Axle 9100017 APTT5 Hydraulic FB Straight w/ EZ-Lube 6151109 6151128 6151144 6151161 6151179 Slipper Single Axle 9100007 APS3SE Hydraulic FB Straight w/ Nev-R-Lube n/a n/a n/a n/a 6151180 Slipper Single Axle 9100018 APS6SE Hydraulic FB 4" Drop 6151118 6151135 6151150 6151167 6151186 Hydraulic FB 4"Drop w/ EZ-Lube 6151119 6151136 6151152 6151169 6151188 Slipper Tandem Axle 9100119 AP202-H202 9100073-04 APT6SE-LD Slipper Tandem Axle - Medium Duty 9100073 APT6SE-MD Hydraulic Disc Slipper Tandem Axle - Heavy Duty 9100020 APT6SE-HD Hydraulic Straight 6151104 Hydraulic Straight w/ EZ-Lube 6151105 Slipper Tandem Axle - Light Duty 3,500 lb. U-Bolt Kits Description Part # Ref# 1/2" Dia 2-3/8" Round 5-1/2" Long 9100045 APUBR-1 1/2" Dia 2-3/8" Round 6-1/2" Long 9100044 APURBR1-XL 9/16" Dia 2" Square 5-1/2" Long 9100046 APUB9 9/16" Dia 1-3/4" Square 5-1/2" Long 9100054 APUB6 545 Hydraulic 4" Drop 6151114 Hydraulic 4"Drop w/ EZ-Lube 6151115 *Axles come with #84 Spindles and 2-3/8" Tube OD or Optional 3" Tube OD Drop Spindles. 3.5K axles are standard WITH Brake Flange 3,500 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Minimum Recommended Maximum Straight 11.25” 16.00” 18.00” 4” Drop 14.00” 16.50” 18.00” 6” Drop 15.75” 16.50” 18.00” Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information. WWW.TEXTRAIL.COM A-16 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 3,500 lb Torflex® Axles & Axle Components NEW GALVANIZED V-BENT TORFLEX AXLE! TF#10 - 3,500 lb. Torflex® Hanger Kits Description TF#10 - 3,500 lb. Torflex® Axles*** Part # Ref# Type TF10 Side Mount Hanger Kit - Weld On 9100004 A/P-166 Idler 545 5475 Part # 550 555 655 TF10 Side Mount Hanger Kit - Weld On Aluminum 9100222 A/P-181 Idler 6152012 6152022 6152030 6152038 6152046 TF10 High Profile Mount Brackets 6152191 n/a Idler w/ EZ-Lube 6152013 6152023 6152031 6152039 6152047 *** Torflex axles are standard low profile and top mounted. 545 5475 550 555 655 Electric 6152014 6152024 6152032 6152040 6152048 Electric w/ EZ-Lube 6152015 6152025 6152033 6152041 6152049 n/a n/a n/a n/a 6152050 Electric 10 x 2-1/4" Electric w/ Nev-R-Lube 545 5475 550 555 655 Hydraulic 6152018 6152026 6152034 6152042 6152051 Hydraulic w/ EZ-Lube 6152020 6152028 6152036 6152044 6152053 n/a n/a n/a n/a 6152054 Hydraulic 10 x 2-1/4" Single-Servo Hydraulic w/ Nev-R-Lube 545 5475 550 555 655 Hydraulic FB 6152019 6152027 6152035 6152043 6152052 Hydraulic FB w/ EZ-Lube 6152021 6152029 6152037 6152045 6152055 n/a n/a n/a n/a 6152056 Hydraulic 10 x 2-1/4" Freeback Hydraulic FB w/ Nev-R-Lube Hydraulic Disc 545 Hydraulic Disc 6152016 Hydraulic Disc w/ EZ-Lube 6152017 3.5K axle comes standard WITH Brake Flange TF# 10 - 3,500 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum 12.75" 23.50" WWW.TEXTRAIL.COM A-17 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES #84 Spindle (3.5K) Replacement Hub & Hub and Drum Components GREASE LUBE PARTS HUBS Item Part # Ref # Description Item 1 7700085 10-19 Double Lip Seal 2.565" OD x 1.719" ID Hubs & Drums 2 7800006 L68149 Inner Bearing Cone 3 7800041 L68111 Inner Bearing Cup 4 7800046 L44610 Outer Bearing Cup 1.980" OD 7650034 8-249-7 ½” Stud 5 on 5.00 5 7800010 L44649 Outer Bearing Cone 7650036 8-249-5 ½” Stud 5 on 5.50 8750003 19-2 7650038 8-250-5 ½” Stud 6 on 5.50 6 20 Cotter Pin 7800059-01 21 Bearing Kit (Includes Item 1 - 6) 7 8750005 6-1 Spindle Nut 8 7700024 21-3 Grease Cap 1.99" Part # Ref # Description Bolt Circle 7650030 8-247-5 ½” Stud 5 on 4.50 7650032 8-247-12 ½” Stud 5 on 4.75 Plain Hubs 22 7650073 8-248-5 ½” Stud 5 on 4.50 7650075 8-248-10 ½” Stud 5 on 4.75 9 7700025 21-41-1 Grease Cap EZ Lube 1.99" 7650077 8-256-7 ½” Stud 5 on 5.00 10 7700053 85-1 Rubber Plug EZ Lube 7650079 8-256-5 ½” Stud 5 on 5.50 11 8750033 5-23 Spindle D-Washer 1" ID EZ Lube 8-251-5 ½” Stud 6 on 5.50 12 8750006 6-191 Spindle Special Jam Nut EZ Lube (After 2002) 13 8750030 6-190 Spindle Nut Retainer EZ Lube (After 2002) 23 7650081 HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Item STUDS & WHEEL NUTS Part # Ref # Description Bolt Circle Hubs & Drums Item Part # Ref # Description 7650030-02 8-247-90 ½” Stud 5 on 4.50 14 7700109 7-122 ½ -20 Pressed Wheel Stud 7650030-03 8-247-94 ½” Stud EZ 5 on 4.50 15 7700045 6-80 ½ -20 60 Deg Cone Nut 7650032-02 8-247-93 ½” Stud 5 on 4.75 16 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 7650032-03 8-247-95 ½” Stud EZ 5 on 4.75 17 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 7650034-02 8-249-91 ½” Stud 5 on 5.00 18 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Steel Capped 7650034-03 8-249-95 ½” Stud EZ 5 on 5.00 7650036-02 8-249-90 ½” Stud 5 on 5.50 7650036-03 8-249-96 ½” Stud EZ 5 on 5.50 10 x 2¼ BRAKES Item Part # Ref # Description 7650038-02 8-250-90 ½” Stud 6 on 5.50 19 6400030 23-26 LH Electric Assembly 7650038-03 8-250-91 ½” Stud EZ 6 on 5.50 6400033 23-27 RH Electric Assembly 6400102 23-468 LH Forward Self-Adjust Electric Assembly 8-248-90 ½” Stud 5 on 4.50 6400103 23-469 RH Forward Self-Adjust Electric Assembly 7650073-03 8-248-95 ½” Stud EZ 5 on 4.50 6400060 23-86 LH Electric Park Assembly 7650075-02 8-248-92 ½” Stud 5 on 4.75 Plain Hubs 7650073-02 6400061 23-87 RH Electric Park Assembly 7650075-03 8-248-97 ½” Stud EZ 5 on 4.75 6400031 23-312 LH Hydraulic Uni-Servo Assembly 7650077-02 8-256-91 ½” Stud 5 on 5.00 6400032 23-313 RH Hydraulic Uni-Servo Assembly 7650077-03 8-256-92 ½” Stud EZ 5 on 5.00 6400093 23-330 LH Hydraulic Park Uni-Servo Assembly 7650079-02 8-256-90 ½” Stud 5 on 5.50 6400094 23-331 RH Hydraulic Park Uni-Servo Assembly 7650079-03 8-256-95 ½” Stud EZ 5 on 5.50 6400095 23-310 LH Hydraulic Duo-Servo Assembly 7650081-02 8-251-90 ½” Stud 6 on 5.50 6400096 23-311 RH Hydraulic Duo-Servo Assembly 7650081-03 8-251-91 ½” Stud EZ 6 on 5.50 6400064 23-344 LH Hydraulic Free Backing Assembly 6400065 23-345 RH Hydraulic Free Backing Assembly WWW.TEXTRAIL.COM A-18 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Nev-R-Lube #84 Spindle (3.5K) Replacement Hub & Hub and Drum Components NEV-R-LUBE PARTS 35MM HUBS WITH BEARING AND WHEEL STUDS Item Part # Ref # Description Item 1 7700125 5-150 Spindle Washer 35MM Hubs & Drums 2 7700126 6-183 Spindle Nut 35MM 3 7700127 92-2 Torque Information Disc 35, 42 & 50MM 4 7700128 69-96 Snap Ring 7700144 7-185 5 7700143 21-84 Hub Cap 35MM 7800063 31-72-3 35MM Bearing Cartridge 7800064 69-94 35MM Bearing Retainer Item Part # Ref # Description 7 Part # 7650099 Ref # 8-386-80 Description Bolt Circle ½"-20 Stud 3.5K 6 on 5.50 Includes: 10 x 2 1/4 BRAKES ½"-20 x 1.64" Long Pressed Wheel Stud STUDS & WHEEL NUTS Item Part # Ref # Description 6 6400030 23-26 LH Electric 3.5K Assembly 8 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 6400033 23-27 RH Electric 3.5K Assembly 9 7700045 6-80 ½ -20 60 Deg Cone Nut 6400060 23-86 LH Electric 3.5K Assembly w/ Park 10 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 6400061 23-87 RH Electric 3.5K Assembly w/ Park 11 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6400031 23-312 LH Hydraulic Uni-Servo Assembly 6400032 23-313 RH Hydraulic Uni-Servo Assembly 6400093 23-330 LH Hydraulic Uni-Servo Assembly w/ Park 6400094 23-331 RH Hydraulic Uni-Servo Assembly w/ Park 6400095 23-310 LH Hydraulic Duo-Servo Assembly 6400096 23-311 RH Hydraulic Duo-Servo Assembly 6400064 23-344 LH Hydraulic Free Backing Assembly 6400065 23-345 RH Hydraulic Free Backing Assembly WWW.TEXTRAIL.COM A-19 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES WWW.TEXTRAIL.COM A-20 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 10” Electric Brake Assemblies & Components Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part # 6400030 6400033 6450165-01 6450227 6450195 6450133 6450134 6450228 6450248 6450226 6450007 6450066 6450222 6450186 6450099 6450241 6450038 6450181 6450001 Ref # 23-26 23-27 71-104 42-97-1 46-80 27-9 47-19 47-20 46-9 5-67 46-18 43-4 71-47 46-77 49-2 27-5 7-41 46-7 6-17 46-16 10" x 2 1/4" Electric Brake Qty/Brk Description 1 LH Electric Assembly 1 RH Electric Assembly 1 Magnet Kit 1 3.5K Oval Magnet for Dexter 10" Electric Brakes 1 Magnet Spring 1 Magnet Retaining Clip 1 LH Actuating Arm 1 RH Actuating Arm 2 Retractor Spring 1 Wing Washer for Brake Shoe 1 Adjuster Screw Spring 1 Adjuster Screw Assembly 1 Shoe & Lining Kit (Includes Item 11-12) 2 Shoe Hold Down Spring & Cup 2 Shoe Hold Down Pin 3 Magnet Wire Retaining Clip 4 7/16”-20 x 0.89” Brake Mounting Pressed Bolt 1 Adjuster Plug 4 7/16”-20 Brake Mounting Nut 1 Wire Grommet 0.437 Dia. WWW.TEXTRAIL.COM A-21 2010 Copyright by TexTrail, Inc. 10" x 2 1/4" Forward Self-Adjusting (FSA) Electric Brake Item Part # Ref # Qty/Brk Description 6400102 23-468 1 6400103 23-469 1 RH FSA Electric Assembly 1 6450165-01 71-104 1 Magnet Kit 42-97-1 1 2 6450227 46-80 1 Magnet Spring 3 6450195 27-9 1 Magnet Retaining Clip 4 6450133 47-19 1 LH Actuating Arm 6450134 47-20 1 RH Actuating Arm 5 6450228 46-9 2 Retractor Spring 6 6450248 5-67 1 Wing Washer for Brake Shoe 7 *** 46-139 1 Adjuster Screw Spring 8 *** 48-22 1 LH Adjuster Screw Assembly *** 48-23 1 RH Adjuster Screw Assembly 9 6450293 71-681 1 LH Shoe & Lining Kit (Includes Item 11-12) RH Shoe & Lining Kit (Includes Item 11-12) LH FSA Electric Assembly 3.5K Oval Magnet for Dexter 10” Electric Brakes 6450294 71-682 1 10 6450222 46-77 2 11 6450186 49-2 2 12 *** 46-140 1 LH Lever Spring *** 46-141 1 RH Lever Spring 13 Shoe Hold Down Spring & Cup Shoe Hold Down Pin *** 71-530-1 1 LH Adjusting Lever *** 71-530-2 1 RH Adjusting Lever *** 71-533 1 Adjuster Cable 15 *** 71-529 1 Hook for FSA Cable 16 6450099 27-5 2 Magnet Wire Retaining Clip 17 6450241 7-41 4 7/16"-20 x 0.89" Brake Mounting Pressed Bolt 18 6450038 46-7 1 Adjuster Plug 19 6450181 6-17 4 7/16"-20 Brake Mounting Nut 20 6450001 46-16 1 Wire Grommet 0.437 Dia. 14 *** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits 10" x 2 1/4" FSA Electric Brake Service Repair Kit 6451002 71-680 FSA Brake Service Repair Kit for 1-Axle Consisting of the following: 7 *** 46-139 2 Adjuster Screw Spring 8 *** 48-22 1 LH Adjuster Screw Assembly 8 *** 48-23 1 RH Adjuster Screw Assembly 12 *** 46-140 1 LH Lever Spring 12 *** 46-141 1 RH Lever Spring 13 *** 71-530-1 1 LH Adjusting Lever *** 71-530-2 1 RH Adjusting Lever *** 71-533 1 Adjuster Cable 14 WWW.TEXTRAIL.COM A-22 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 10” FSA Electric Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 10” Hydraulic Brake Assemblies & Components Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part # 6400095 6400096 6400031 6400032 6450228 6451004 6450226 6450007 6450051 6450222 6450186 6450256 6450107 6450108 6450250 6450251 6450241 6450038 6450181 6451005 Ref # 23-310 23-311 23-312 23-313 46-9 5-113 46-18 43-4 71-267 46-77 49-2 54-60 54-62 54-63 54-64 54-65 7-41 46-7 6-17 87-1 10" x 2 1/4" Hydraulic Brake Qty/Brk Description 1 LH Duo-Servo Hydraulic Brake Assembly 1 RH Duo-Servo Hydraulic Brake Assembly 1 LH Uni-Servo Hydraulic Brake Assembly 1 RH Uni-Servo Hydraulic Brake Assembly 1 Retractor Spring 1 Anchor Post Washer 1 Adjusting Screw Spring 1 Adjuster Assembly 1 Shoe & Lining Kit 1 Shoe Hold Down Spring & Cup 1 Shoe Hold Down Pin 1 Cylinder Push Rod 1 LH Duo-Servo Wheel Cylinder 1 RH Duo-Servo Wheel Cylinder 1 LH Uni-Servo Wheel Cylinder 1 RH Uni-Servo Wheel Cylinder 4 7/16"-20 x 0.89" Pressed Brake Mounting Stud 1 Adjuster Slot Plug 4 7/16"-20 Brake Mounting Hex Nut 2 Sems (screw & washer assembly) 5/16"-18 x 0.62 WWW.TEXTRAIL.COM A-23 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 10" x 2 1/4" Hydraulic Free Backing Brake Item Part # Ref # Qty/Brk 6400064 23-344 1 6400065 23-345 1 1 46-107-1 1 2 6450228 46-9 1 3 6450265 71-393 1 4 6450222 46-77 1 5 6450186 49-2 1 6 6450225 46-83 1 7 6450007 43-4 1 8 37-69-2 1 9 40-240-2 1 10 5-64 1 11 6451007 46-108-1 1 12 6450241 7-41 4 13 6450256 54-60 1 14 6450250 54-64 1 6450251 54-65 1 15 6451005 87-1 2 16 6450181 6-17 4 17 6450038 46-7 1 6451006 71-514 1 DEMCO 10” x 2 1/4” HFB Marine Brakes 6400028 SB40716 1 6400028 SB40715 1 WWW.TEXTRAIL.COM Description LH HFB Brake Assembly RH HFB Brake Assembly Shoe Lever Return Spring Retractor Spring Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin Adjusting Screw Spring Adjuster Assembly Travel Link Zinc Shoe Lever Washer 0.382 x 1.28 x 0.1196 Zinc Plated Primary Shoe Return Spring 7/16"-20 x 0.89" Pressed Brake Mounting Stud Cylinder Push Rod LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder Sems (screw & washer assembly) 5/16"-18 x 0.62 7/16"-20 Brake Mounting Hex Nut Adjuster Slot Plug Park Brake Cable LH Hydraulic Brake Assembly-Galvanized RH Hydraulic Brake Assembly-Galvanized A-24 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 10” HFB Brake Assemblies & Components AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 10” Hydraulic with Park Brake Assemblies & Components 10" x 2 1/4" Hydraulic Brake with Parking Feature Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part # 6400093 6400094 6450228 6451004 6450226 6450007 6450051 6450222 6450186 6450190 6450256 6450107 6450108 6450250 6450251 15 16 17 18 19 6450241 6450038 6450181 6451005 6451006 Ref # Qty/Brk 23-400 23-401 23-330 23-331 46-9 5-113 46-103 47-118 46-18 43-4 71-267 46-77 49-2 69-55 5-112 54-60 54-62 54-63 54-64 54-65 47-116-1 47-117-1 7-41 46-7 6-17 87-1 71-514 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/2 1 1 1 1 1 1 4 1 4 2 1 WWW.TEXTRAIL.COM Description LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Retractor Spring Anchor Post Washer Parking Strut Spring Parking Strut Adjusting Screw Spring Adjuster Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin Retainer Horseshoe Park Lever Washer 3/8" x 0.013 Cylinder Push Rod US (1) DS (2) LH Duo-Servo Wheel Cylinder RH Duo-Servo Wheel Cylinder LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder LH Parking Lever and Pin RH Parking Lever and Pin 7/16"-20 x 0.89" Pressed Brake Mounting Stud Adjuster Slot Plug 7/16"-20 Brake Mounting Hex Nut Sems (screw & washer assembly) 5/16"-18 x 0.62 Park Brake Cable A-25 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S Rotary Style 5 on 4.5" Bolt 10" Integral Pattern Fits all 4-Bolt Brake Flange with #84 Spindle For 13" & Larger Wheels REPLACEMENT PARTS Item Part # Ref # 1 6450558 DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 2 6450556 DBCMHBS 3 6450560 4 6450552 5 6450553 Description Other Replacement Parts Item Part # Stainless Steel Sleeve 16 7700085 10-19 Double Lip Seal 2.565" OD x 1.719" ID DBCMHBSB Rubber Bushing for Guide Bolt 17 7800006 L68149 Inner Bearing Cone DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF 18 7800041 L68111 Inner Bearing Cup DBCNPTADPBBS Bleed Port / Screw Assy (contains next two items) 19 7800046 L44610 Outer Bearing Cup Ref # Description 16-17 & 20-27 Not Included in Kits Below 6451000 DBCNPTBBS Bleed Screw Port 1/4"-28 20 7800010 L44649 Outer Bearing Cone 6451001 DBCNPTADP Bleed Screw Adapter 1/8" 21 8750033 5-23 Spindle D-Washer 1" 22 8750005 6-1 Spindle Nut Caliper E-Coat 23 8750003 19-2 Cotter Pin Caliper Silver Cadmium Plated 24 7700024 21-3 Grease Cap 1.99" Caliper Stainless Steel 25 7700025 21-41-1 2-1/4" Stainless Steel Piston 26 7700053 85-1 Rubber Plug EZ Lube 27 6450565 LB169 ½ -20 x 1.69 Pressed Wheel Stud Caliper comes w/ items 1-9 6 Kits contain parts for one complete axle 6450527 DBC225E 6450528 DBC225SCAD 6450529 DBC225SS 7 6450548 DBC225PISTONSS 8 6450550 DBC225SEAL Piston Rubber Seal 9 6450551 DBC225BOOT Rubber Dust Boot 7700109 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud 10 6450536 CMB10I Caliper Mounting Bracket E-Coat 6450739 LB2.0 ½ -20 x 2" Long Pressed Wheel Stud 7700142 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud 7700045 6-80 ½ -20 60 Deg Cone Nut Brake Pads (Ceramic) 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 11 12 Caliper Mounting Bracket SCD Grease Cap EZ Lube 1.99" 6450537 CMB10ISCAD 6450630 DBC225SMPAD 6450620 DBC225CERMPAD 6450523 ROTORHUB10 545 10" Rotor Standard Automotive Finish 7700045 6-80 ½ -20 60 Deg Cone Nut 6450524 ROTORHUB10E 545 10" Rotor E-Coat 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 6450525 ROTORHUB10SCAD 545 10" Rotor Silver Cadmium Plated 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped Brake Pads (Semi-Metallic) 28 Mounting Hardware Not Included in Kits Below Item Part # Ref # 13 6450241 7-75 14 7030116 5-8 15 6450181 6-17 Description 7/16"-20 x 1-1/4" Grade 8 Bolt 7/16" Lock Washer 7/16"-20 Nut Rotor Only Kits Includes Items 1 thru 12 and Races Item For Salt Water applications it is recommended the use of Stainless Steel Hardware Part # Ref # 6450507 2HRCM10-K 6450508 2HRCM10E-K 6450509 2HRCM10ESCAD-K 6450510 DBSI-3.5K-MAXX 6450511 DBI-3.5K-MAXX-SS Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, SCAD Rotor, E-Coat Caliper Axle Kit, MAXX Rotor and Caliper Axle Kit, MAXX Rotor, SS Caliper 6450511 6450508 WWW.TEXTRAIL.COM A-26 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 3,500 lb Integral Disc Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 3,500 lb Slip-On Disc Brake Assemblies & Components Rotary Style 10" Slip -On 5 on 4.5" Bolt Pattern Fits all 4-Bolt Brake Flange with #84 Spindle REPLACEMENT PARTS Item 1 2 3 4 5 6 Part # 6450558 6450556 6450560 6450552 6450553 6451000 6451001 6450527 6450528 6450529 7 6450548 8 6450550 9 6450551 10 6450533 6450534 6450535 11 6450630 6450620 12 6450518 6450519 6450520 6450521 Mounting Hardware Ref # Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 DBC225E Caliper E-Coat DBC225SCAD Caliper Silver Cadmium Plated DBC225SS Caliper Stainless Steel DBC225PISTONSS 2-1/4" Stainless Steel Piston DBC225SEAL Piston Rubber Seal DBC225BOOT Rubber Dust Boot CMB10U Caliper Mounting Bracket E-Coat CMB10USCAD Caliper Mounting Bracket SCD CMB10USS Caliper Mounting Bracket SS DBC225SMPAD Brake Pads (Semi-Metallic) DBC225CERMPAD Brake Pads (Ceramic) ROTOR10 545 10" Rotor Standard Automotive Finish ROTOR10E 545 10" Rotor E-Coat ROTOR10SCAD 545 10" Rotor Silver Cadmium Plated ROTOR10SS 545 10" Rotor Stainless Steel 6450501 WWW.TEXTRAIL.COM Kits contain parts for one complete axle For 14" & Larger Wheels Not Included in Kits Below Item Part # Ref # Description 13 6450241 7-75 7/16"-20 x 1-1/4" Grade 8 Bolt 14 7030116 5-8 7/16" Lock Washer 15 6450181 6-17 7/16"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware Rotor Only Kits Includes Items 1 thru 12 Item 6450503 A-27 Part # 6450500 6450501 6450502 6450503 6450504 6450505 Ref # 2RCM10-K 2RCM10E-K 2RCM10ESCAD-K DBSO-3.5K-MAXX DBSO-3.5K-MAXX-SS DBSO-3.5K-SS Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, E-Coat, SCAD Caliper Axle Kit, MAXX Rotor and Caliper Axle Kit, MAXX Rotor, SS Caliper Axle Kit, Stainless Steel 6450505 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 4,400 lb Axles & Axle Components 4,400 lb. Leaf Springs 4,400 lb. Spring Axles* Description Capacity Part # Ref# Type Part # Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150051 72-25 Electric 10 x 2-1/4" 655 Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150016 SW4 Slipper 2" x 24-7/8" 4 Leaf 2,500 lb. 9150074 1003T3 Double Eye 1.75" x 25-1/4" 6 Leaf 3,500 lb. 9150021 SW6 Part # Ref# Description Part # Ref# Double Eye Single Axle 1-1/4" Hanger 9100063 APS1 1/2" Diameter 2-3/8" Round 5-1/2" Long 9100045 APUBR-1 Double Eye Single Axle 9100116 APS2 1/2" Diameter 2-3/8" Round 6-1/2" Long 9100044 APURBR1-XL Double Eye Single Axle 9100087 APS3 Double Eye Single Axle 9100071 APS4 *Axles come with #84 Spindles and 3" OD Tube. 4.4K axles are standard WITH Brake Flange Double Eye Single Axle 9100117 APS5 Double Eye Tandem Axle 9100064 APT1 Double Eye Tandem Axle 9100041 APT3 Double Eye Tandem Axle 9100060 APT4 Electric Straight 6151683 Electric Straight w/ EZ-Lube 6151684 4,400 lb. Hanger Kits 4,400 lb. U-Bolt Kits Description Double Eye Tandem Axle 2.625" Strap 9100061 APT5 Double Eye Triple Axle 9100016 APTT3 Double Eye Triple Axle 9100017 APTT5 Slipper Single Axle 9100007 APS3SE Slipper Single Axle 9100018 APS6SE Slipper Tandem Axle 9100119 AP202-H202 9100073-04 APT6SE-LD Slipper Tandem Axle - Medium Duty 9100073 APT6SE-MD Slipper Tandem Axle - Heavy Duty 9100020 APT6SE-HD Slipper Tandem Axle - Light Duty 4,400 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Minimum Recommended Maximum 12.00” 16.00” 19.00” Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information. WWW.TEXTRAIL.COM A-28 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S #84 Spindle (4.4K) Replacement Hub & Hub and Drum Components GREASE LUBE PARTS Item Part # Ref # 1 7700085 10-19 2 7800006 L68149 Inner Bearing Cone 3 7800041 L68111 Inner Bearing Cup 4 7800045 LM67010 Outer Bearing Cup 2.328" OD 5 7800043 LM67048 Outer Bearing Cone 8750003 19-2 6 7800061-02 HUBS Description Item Double Lip Seal 2.565" OD x 1.719" ID Hubs & Drums 15 Part # 7650151 Ref # Description Bolt Circle 8-407-5 ½” Stud 6 on 5.50 Plain Hubs HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Cotter Pin Bearing Kit (Includes Item 1 - 6) Item Spindle Nut Hubs & Drums Part # Ref # Description Bolt Circle 7 8750005 6-1 8 7700027 45896 Grease Cap 2.45" 7650151-02 8-407-90 ½” Stud 6 on 5.50 9 7700016 21-1-1 Grease Cap EZ Lube 2.45" 7650151-03 8-407-91 ½” Stud EZ 6 on 5.50 10 7700053 85-1 Rubber Plug EZ Lube 11 8750033 5-23 Spindle D-Washer 1" ID EZ Lube 12 8750006 6-191 Spindle Special Jam Nut EZ Lube (After 2002) 13 8750030 6-190 Spindle Nut Retainer EZ Lube (After 2002) STUDS & WHEEL NUTS 10 x 2¼ BRAKES Item Part # Ref # 14 6400078 23-454 LH Electric Assembly 6400079 23-455 RH Electric Assembly Item Part # Ref # Description 16 7700109 7-122 ½ -20 Pressed Wheel Stud 17 7700045 6-80 ½ -20 60 Deg Cone Nut 18 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-NGoTM 19 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-NGoTM 20 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Steel Capped Description WWW.TEXTRAIL.COM A-29 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 10" x 2 1/4" Electric Brake Item Part # Ref # 1 6400078 6400079 6450166-01 23-454 23-455 71-105 42-99-1 46-80 27-9 47-19 47-20 46-9 5-67 46-18 43-4 71-672 46-77 49-2 27-5 7-271 46-7 6-17 46-16 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6450227 6450195 6450133 6450134 6450228 6450248 6450226 6450007 6450064 6450222 6450186 6450099 6450307 6450038 6450181 6450001 WWW.TEXTRAIL.COM Qty/ Brk 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 4 1 4 1 Description LH Electric Assembly RH Electric Assembly Magnet Kit 4.4K Oval Magnet for Dexter 10” Electric Brakes Magnet Spring Magnet Retaining Clip LH Actuating Arm RH Actuating Arm Retractor Spring Wing Washer for Brake Shoe Adjuster Screw Spring Adjuster Screw Assembly Shoe & Lining Kit (Includes Item 11-12) Shoe Hold Down Spring & Cup Shoe Hold Down Pin Magnet Wire Retaining Clip 7/16"-20 x 1.18" Brake Mounting Pressed Bolt Adjuster Plug 7/16"-20 Brake Mounting Nut Wire Grommet 0.437 Dia. A-30 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 10” Electric Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 6,000 lb Regular and Heavy Duty Axles & Axle Components 6K Light Duty Axles 6K Heavy Duty Axles Light Duty Axles .191 Wall Heavy Duty Axles .250 Wall Type Part # Idler 5 Spoke 655 865 5 Spoke Part # 655 865 Idler Straight w/ Grease 6151247 6151189 6151217 6151342 6151278 6151307 Idler Straight w/ EZ-Lube 6151248 6151190 6151218 6151343 6151279 6151311 Idler Straight w/ Oil 6151249 n/a 6151219 6151344 n/a 6151308 Idler 4" Drop w/ Grease 6151262 6151206 6151232 6151357 6151295 6151326 Idler 4"Drop w/ EZ-Lube 6151263 6151207 6151233 6151358 6151296 6151327 Idler 4"Drop w/ Oil 6151264 n/a 6151234 6151359 n/a 6151328 Electric 12" x 2" 5 Spoke 655 865 5 Spoke 655 865 Electric Straight w/ Grease 6151250 6151191 6151220 6151345 6151280 6151309 Electric Straight w/ EZ-Lube 6151251 6151192 6151221 6151346 6151281 6151310 Electric Straight w/ Oil 6151252 n/a 6151222 6151347 n/a 6151312 n/a 6151193 n/a n/a 6151282 6151313 Electric 4" Drop w/ Grease 6151265 6151208 6151235 6151360 6151297 6151329 Electric 4"Drop w/ EZ-Lube 6151266 6151209 6151236 6151361 6151298 6151330 Electric 4"Drop w/ Oil 6151267 n/a 6151237 6151362 n/a 6151331 Electric Straight w/ Nev-R-Lube Hydraulic 12" x 2" Single-Servo 5 Spoke 655 865 5 Spoke 655 865 Hydraulic Straight w/ Grease 6151253 6151197 6151223 6151348 6151286 6151314 Hydraulic Straight w/ EZ-Lube 6151255 6151199 6151225 6151350 6151288 6151316 Hydraulic Straight w/ Oil 6151257 n/a 6151227 6151352 6151289 6151318 Hydraulic Straight w/ Nev-R-Lube n/a 6151200 n/a n/a n/a 6151319 Hydraulic 4" Drop w/ Grease 6151268 6151212 6151238 6151363 6151301 6151332 Hydraulic 4"Drop w/ EZ-Lube 6151271 6151214 6151240 6151365 6151303 6151334 Hydraulic 4"Drop w/ Oil 6151273 n/a 6151242 6151367 n/a 6151336 Light Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center Maximum Axle Type Minimum Recommended Straight 12.75" 16.00" 19.00" Drop 15.75" 18.50" 19.00" Hydraulic 12" x 2" Duo-Servo 5 Spoke 655 865 5 Spoke 655 865 Hydraulic Straight w/ Grease 6151259 6151203 6151229 6151354 6151292 6151322 Hydraulic Straight w/ EZ-Lube 6151260 6151204 6151230 6151355 6151293 6151323 Hydraulic Straight w/ Oil 6151261 n/a 6151231 6151356 6151294 6151324 Axle Type Minimum Recommended n/a 6151205 n/a n/a n/a 6151325 Straight 12.75" 16.25" 20.00" Hydraulic 4" Drop w/ Grease 6151275 6151216 6151244 6151369 6151305 6151338 Drop 15.75" 18.00" 20.00" Hydraulic 4"Drop w/ EZ-Lube 6151276 6151245 6151370 6151306 6151340 Hydraulic 4"Drop w/ Oil 6151277 n/a 6151246 6151371 n/a 6151341 Hydraulic Straight w/ Nev-R-Lube Hydraulic 12" x 2" Freeback 5 Spoke 655 865 5 Spoke 655 865 Hydraulic FB Straight w/ Grease 6151254 6151198 6151224 6151349 6151287 6151315 Hydraulic FB Straight w/ EZ-Lube 6151256 6151201 6151226 6151351 6151290 6151317 Hydraulic FB Straight w/ Oil 6151258 n/a 6151228 6151353 6151291 6151320 Hydraulic FB Straight w/ Nev-R-Lube n/a 6151202 n/a n/a n/a 6151321 Hydraulic FB 4" Drop w/ Grease 6151269 6151213 6151239 6151364 6151302 6151333 Hydraulic FB 4"Drop w/ EZ-Lube 6151272 6151215 6151241 6151366 6151304 6151335 Hydraulic FB 4"Drop w/ Oil 6151274 n/a 6151243 6151368 n/a 6151337 Hydraulic Disc 865 5 Spoke 655 865 5 Spoke 655 Hydraulic Straight n/a 6151194 n/a n/a 6151283 n/a Hydraulic Straight w/ EZ-Lube n/a 6151195 n/a n/a 6151284 n/a Hydraulic Straight w/ Nev-R-Lube n/a 6151196 n/a n/a 6151285 n/a Hydraulic 4" Drop n/a 6151210 n/a n/a 6151299 n/a Hydraulic 4"Drop w/ EZ-Lube n/a 6151211 n/a n/a 6151300 n/a Std #42 Spindle and 3" OD Tube Heavy Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center Maximum STD #42 Spindle and 3" OD Tube 0.191" Wall 0.250" Wall Opt 3.5" OD Tube with 0.500" Wall WWW.TEXTRAIL.COM A-31 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 7,000 lb - 8,000 lb Axles & Axle Components 7,000 lb. 7,200 lb. 8,000 lb. Type Part # Part # Idler 5 Spoke 865 865 865 5/8" Studs Idler Straight w/ Grease 6151414 6151380 9/16" Studs (Flange Nut) (6-109) Idler Straight w/ EZ-Lube 6151415 6151381 6151461 6151602 6151603 6151601 865 5/8" Studs Idler Straight w/ Oil 6151416 6151382 6151460 6151600 Idler 4" Drop w/ Grease 6151429 6151399 n/a n/a n/a Idler 4"Drop w/ EZ-Lube 6151430 6151400 6151471 6151622 6151623 Idler 4"Drop w/ Oil 6151431 6151401 6151470 6151620 6151621 Electric 12" x 2" 5 Spoke 865 865 9/16" Studs (Flange Nut) Electric Straight w/ Grease 6151417 6151383 6151450 n/a n/a n/a Electric Straight w/ EZ-Lube 6151418 6151384 6151451 6151463 6151606 6151607 Electric Straight w/ Oil 6151419 6151385 6151452 6151462 6151604 6151605 n/a 6151386 6151464 6151608 6151609 Electric 4" Drop w/ Grease 6151432 6151402 6151453 n/a n/a n/a Electric 4"Drop w/ EZ-Lube 6151433 6151403 6151454 6151473 6151626 6151627 Electric 4"Drop w/ Oil 6151434 6151404 6151455 6151472 6151624 6151625 Electric Straight w/ Nev-R-Lube (6-109) 7,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Minimum Recommended Maximum Straight 13.00” 16.25” 18.00” Drop 15.75” 17.75” 18.00” 7,200 lb. Spring Axles difference between Hub Face and Spring Center Hydraulic 12" x 2" Single-Servo 5 Spoke 865 9/16" Studs (Flange Nut) (6-109) Axle Type Minimum Recommended Maximum Hydraulic Straight w/ Grease 6151420 6151387 n/a n/a n/a Straight 14.00” 15.00” 18.00” Hydraulic Straight w/ EZ-Lube 6151422 6151389 6151469 6151618 6151619 Drop 15.75” 16.00” 18.00” Hydraulic Straight w/ Oil 6151424 6151391 6151468 6151616 6151617 Hydraulic Straight w/ Nev-R-Lube n/a 6151392 n/a n/a n/a Hydraulic 4" Drop w/ Grease 6151435 6151405 n/a n/a n/a Hydraulic 4"Drop w/ EZ-Lube 6151437 6151407 6151477 6151478 6151479 Hydraulic 4"Drop w/ Oil 6151439 6151409 6151476 6151631 6151632 Hydraulic 12" x 2" Duo-Servo 5 Spoke 865 9/16" Studs (Flange Nut) (6-109) Hydraulic Straight w/ Grease 6151426 6151395 n/a n/a n/a Hydraulic Straight w/ EZ-Lube 6151427 6151396 6151466 6151612 6151613 Hydraulic Straight w/ Oil 6151428 6151397 6151465 6151610 6151611 Axle Type Minimum Recommended 6151615 Straight 16.00" 19.00" 19.00” Drop 18.00" 19.00" 19.00” Hydraulic Straight w/ Nev-R-Lube n/a 6151398 6151467 6151614 Hydraulic 4" Drop w/ Grease 6151441 6151411 n/a n/a n/a Hydraulic 4"Drop w/ EZ-Lube 6151442 6151412 6151475 6151633 6151634 Hydraulic 4"Drop w/ Oil 6151443 6151413 6151474 6151629 6151630 Hydraulic 12" x 2" Freeback 5 Spoke 865 Hydraulic FB Straight w/ Grease 6151421 6151388 Hydraulic FB Straight w/ EZ-Lube 6151423 6151390 Hydraulic FB Straight w/ Oil 6151425 6151393 Hydraulic FB Straight w/ Nev-R-Lube n/a 6151394 Hydraulic FB 4" Drop w/ Grease 6151436 6151406 Hydraulic FB 4"Drop w/ EZ-Lube 6151438 6151408 Hydraulic FB 4"Drop w/ Oil 6151440 6151410 WWW.TEXTRAIL.COM A-32 8,000 lb. Spring Axles difference between Hub Face and Spring Center Maximum 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 6,000 lb Torflex® Axles & Axle Components ts New Galvanized V-bent Torflex Axle TF#11 - 6,000 lb. Torflex® Hanger Kits Description TF#11 - 6,000 lb. Torflex® Axles*** Part # Ref# Type TF11 Side Mount Hanger Kit - Weld On 9100002 A/P-167 Idler 655 865 UTG TF11 Side Mount Hanger Kit - Weld On Aluminum 9100223 A/P-182 Idler 6152057 6152074 6152093 TF11 High Profile Mount Brackets 6152191 n/a Idler w/ EZ-Lube 6152058 6152075 6152094 n/a 6152076 6152095 *** Torflex axles are standard low profile and top mounted. Part # Idler w/ Oil 655 865 UTG Electric 6152059 6152077 6152096 Electric w/ EZ-Lube 6152060 6152078 6152097 n/a 6152080 6152098 6152061 6152079 n/a Electric 12 x 2" Electric w/ Oil Electric w/ Nev-R-Lube 655 865 UTG Hydraulic 6152065 6152081 6152099 Hydraulic w/ EZ-Lube 6152067 6152083 6152101 n/a 6152087 6152103 6152068 6152084 n/a 655 865 UTG Hydraulic 6152071 6152089 6152105 Hydraulic w/ EZ-Lube 6152073 6152090 6152106 Hydraulic w/ Oil n/a 6152092 6152107 Hydraulic w/ Nev-R-Lube n/a 6152091 n/a Hydraulic 12 x 2" Freeback 655 865 UTG Hydraulic FB 6152066 6152082 6152100 Hydraulic FB w/ EZ-Lube 6152069 6152085 6152102 n/a 6152088 6152104 6152070 6152086 n/a Hydraulic 12 x 2" Single-Servo Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Duo-Servo Demand Better. Demand Dexter. Hydraulic FB w/ Oil Hydraulic FB w/ Nev-R-Lube Hydraulic Disc 655 Hydraulic Disc 6152062 Hydraulic Disc w/ EZ-Lube 6152063 Hydraulic Disc w/ Nev-R-Lube 6152064 6K axle comes standard WITH Brake Flange WWW.TEXTRAIL.COM A-33 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 7,000 lb Torflex® Axles & Axle Components TF#12 - 7,000 lb. Torflex® Hanger Kits Description TF#12 - 7,000 lb. Torflex® Axles*** Part # Ref# Type TF12 Side Mount Hanger Kit - Weld On 9100003 A/P-168 Idler 865 TF12 Side Mount Hanger Kit - Weld On Aluminum 9100224 A/P-183 Idler 6152123 6152108 TF12 High Profile Mount Brackets 6152191 n/a Idler w/ EZ-Lube 6152124 6152109 Idler w/ Oil 6152125 6152110 865 UTG *** Torflex axles are standard low profile and top mounted. Part # Electric 12 x 2" UTG Electric 6152126 6152111 Electric w/ EZ-Lube 6152127 6152112 Electric w/ Oil 6152129 6152113 Electric w/ Nev-R-Lube 6152128 n/a 865 UTG Hydraulic 12 x 2" Single-Servo Hydraulic 6152130 6152114 Hydraulic w/ EZ-Lube 6152132 6152116 Hydraulic w/ Oil 6152136 6152118 Hydraulic w/ Nev-R-Lube 6152133 n/a Hydraulic 12 x 2" Duo-Servo 865 UTG Hydraulic 6152138 6152120 Hydraulic w/ EZ-Lube 6152139 6152121 Hydraulic w/ Oil 6152141 6152122 Hydraulic w/ Nev-R-Lube 6152140 n/a Hydraulic 12 x 2" Freeback 865 UTG Hydraulic FB 6152131 6152115 Hydraulic FB w/ EZ-Lube 6152134 6152117 Hydraulic FB w/ Oil 6152137 6152119 Hydraulic FB w/ Nev-R-Lube 6152135 n/a 7K axle comes standard WITH Brake Flange TF# 12 - 7,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum 15.00” 30.25” WWW.TEXTRAIL.COM A-34 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 7,200 lb Torflex® Axles & Axle Components TF#12V - 7,200 lb. Torflex® Hanger Kits Description TF#12V - 7,200 lb. Torflex® Axles*** Part # Ref# TF12V Side Mount Hanger Kit - Weld On 9100003 A/P-168 TF12V Side Mount Hanger Kit - Weld On Aluminum 9100224 A/P-183 TF12V High Profile Mount Brackets 6152191 n/a Type Part # Electric 12-1/4" x 2-1/2" Electric *** Torflex axles are standard low profile and top mounted. 865 865 5/8" 865 5/8" 9/16" Studs Flng Nuts 6-109 6152142 6152143 6152144 Electric w/ EZ-Lube 6152145 6152146 6152147 Electric w/ Oil 6152148 6152149 6152150 7.2K axle comes standard WITH Brake Flange TF# 12V - 7,200 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum 14.00” Maximum 29.50" 8,000 lb Torflex® Axles & Axle Components TF#13 - 8,000 lb. Torflex® Hanger Kits Description TF#13 - 8,000 lb. Torflex® Axles*** Part # Ref# TF13 Side Mount Hanger Kit - Weld On 9100001 A/P-169 TF13 High Profile Mount Brackets 6152191 n/a *** Torflex axles are standard low profile and top mounted. Type Part # Idler 865 865 5/8" 865 5/8" 9/16" Studs Flng Nuts 6-109 Idler w/ Oil 6152151 6152152 6152153 Idler w/ EZ-Lube 6152154 6152155 6152156 9/16" Studs Flng Nuts 6-109 Electric w/ Oil 6152157 6152158 6152159 Electric w/ EZ-Lube 6152160 6152161 6152162 Electric w/ Nev-R-Lube 6152163 6152164 6152165 9/16" Studs Flng Nuts 6-109 Electric 12-1/4" x 3-3/8" Hydraulic 12-1/4" x 3-3/8" Duo-Servo Hydraulic w/ Oil 6152175 6152176 6152177 Hydraulic w/ EZ-Lube 6152178 6152179 6152180 Hydraulic w/ Nev-R-Lube 6152181 6152182 6152183 9/16" Studs Flng Nuts 6-109 Hydraulic Disc w/ Oil 6152166 6152167 6152168 Hydraulic Disc w/ EZ-Lube 6152169 6152170 6152171 Hydraulic Disc w/ Nev-R-Lube 6152172 6152173 6152174 Hydraulic Disc 8K axle comes standard WITH Brake Flange TF# 13 - 8,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum 18.00” WWW.TEXTRAIL.COM 43.00” A-35 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 6,000 lb. - 8,000 lb Leaf Springs Description Capacity Part # Ref# 6,000 lb. Light Duty 6,000 lb. Heavy Duty Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150051 72-25 X Double Eye 1.75" x 25-1/4" 4 Leaf 2,500 lb. 9150016 SW4 Double Eye 1.75" x 26-3/4" 6 Leaf 2,700 lb. 9150017 SW626 X X Double Eye 1.75" x 25-1/4" 6 Leaf 3,500 lb. 9150021 SW6 X X Double Eye 1.75" x 25-1/4" 5 Leaf 2,900 lb. 9150018 SW5 X X Double Eye 1.75" x 27" 6 Leaf 3,800 lb. 9150023 SW627 X X Slipper 2" x 26-1/2" 5 Leaf 3,400 lb. 9150020 E5226 X X X Slipper 2" x 26-1/2" 6 Leaf 3,750 lb. 9150022 HW5116 X X X Slipper 2" x 26-1/8" 7 Leaf 4,000 lb. 9150034 1403T3 X X X Slipper 2" x 29-1/2" 6 Leaf 4,000 lb. 9150024 E5115 X X X Slipper 2" x 24-7/8" 4 Leaf 2,500 lb. 9150074 1003T3 X Slipper 2" x 26" 5 Leaf 3,500 lb. 9150000 1203T3 X X X X 7,000-7,200 lb. 8,000 lb. X X Slipper 2" x 26-1/4" 7 Leaf 4,000 lb. 9150035 93165 X X X Slipper 2" x 26-7/8" 7 Leaf 4,000 lb. 9150036 72-51-1 X X X Slipper 2" x 26-7/8" 7 Leaf 5/8" 4,000 lb. 9150038 72-51-2 X 6,000 lb. - 8,000 lb Hanger Kits Part # Ref# 6,000 lb. Light Duty 6,000 lb. Heavy Duty 7,000-7,200 lb. Double Eye Single Axle 1-1/4" Hanger 9100063 APS1 X X X Double Eye Single Axle 9100116 APS2 X X X Double Eye Single Axle 9100087 APS3 X X X Double Eye Single Axle 9100071 APS4 X X X Double Eye Single Axle 9100117 APS5 X X X Double Eye Tandem Axle 9100064 APT1 X X X Double Eye Tandem Axle 9100041 APT3 X X X Double Eye Tandem Axle 9100060 APT4 X X X Double Eye Tandem Axle 9100061 APT5 X X X Double Eye Triple Axle 9100016 APTT3 X X X Double Eye Triple Axle 9100017 APTT5 X X X Slipper Single Axle 9100007 APS3SE X X X X Slipper Single Axle 9100018 APS6SE X X X X Slipper Tandem Axle 9100119 AP202H202 X X X X Slipper Tandem Axle - Heavy Duty 9100020 APT6SE-HD X X X X Slipper Tandem Axle - Medium Duty 9100073 APT6SE-MD X X X X 8,000 lb. Description 8,000 lb. 6,000 lb. - 8,000 lb U-Bolt Kits Part # Ref# 6,000 lb. Light Duty 6,000 lb. Heavy Duty 7,000-7,200 lb. 1/2" Diameter 3" Round 7" Long 9100047 APUBR2 X X X 9/16" Diameter 3" Round 7-1/2" Long 9100048 APUBR9 X X X 5/8" Diameter 3-1/2" Round 9" Long 9100049 APUBR35 X 9/16" Diameter 3-1/2" Round 7-13/16" Long 9100050 APUBR35L X Description Note: See Suspension (Section B) for detailed Spring, Hanger and U-Bolt Kit information. WWW.TEXTRAIL.COM A-36 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES Suspension Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S #42 Spindle (6K LIGHT DUTY - 6K HEAVY DUTY) Replacement Hub & Hub and Drum Components OIL / GREASE LUBE PARTS HUBS Item Part # Ref # Description Item 1 7700073 10-36 Double Lip Seal 3.376"OD x 2.250"ID Hubs & Drums 7700088 10-63 Unitized Oil Seal 3.376"OD x 2.250"ID 20 7700086 10-10 Double Lip Seal 3.376"OD x 2.125"ID 2 7800026 25580 Inner Bearing Cup 3 7800054 25520 Inner Race Cone 4 7800055 15245 * 7800045 LM67010 5 7800027 15123 * 7800043 LM67048 Outer Bearing Cone (6K LT) Includes bearings, seal, cap & lug nuts. 6 8750003 19-2 Cotter Pin Item 7 8750005 6-1 Spindle Nut Hubs & Drums 8 7700027 21-1 Grease Cap 2.44" * 7650133-02 8-201-90 ½” Stud for 5.2K 2.125" SEAL 6 on 5.50 9 7700016 21-42-1 * 7650133-03 8-201-94 ½” Stud for 5.2K EZ 2.125" SEAL 6 on 5.50 10 7700053 85-1 Rubber Plug EZ Lube 7650041-02 8-201-9A ½” Stud for 5.2-6K 2.250" 6 on 5.50 11 8750033 5-23 Spindle D-Washer 1" ID EZ Lube 7650041-03 8-201-9B ½” Stud for 5.2-6K EZ 2.250" 6 on 5.50 12 8750006 6-191 Spindle Special Jam Nut EZ Lube (After 2002) Plain Hubs 13 8750030 6-190 Spindle Nut Retainer EZ Lube (After 2002) * 7650135-02 8-213-90 ½” Stud for 5.2K 2.125" SEAL 6 on 5.50 8750040 5-101 Spindle Tang Washer EZ Lube (Before 2002) * 7650135-03 8-213-95 ½” Stud for 5.2K EZ 2.125" SEAL 6 on 5.50 7650085-04 8-213-96 ½” 15123 for 6K 2.25" SEAL 6 on 5.50 7650085-05 8-213-9C ½” 15123 for 6K EZ 2.25" SEAL 6 on 5.50 (Before 10/'97) Part # Bolt Circle Ref # Description 7650133 8-201-5 ½” Stud 5.2K 2.125" SEAL 6 on 5.50 7650041 8-201-9 ½” Stud 5.2-6K 2.250" SEAL 6 on 5.50 7650097 8-213-8 ½” Tapped 5.2K 6 on 5.50 7650135 8-213-5 ½” Stud 5.2K 6 on 5.50 7650085 8-213-9 ½” Stud 15123 6K 6 on 5.50 Plain Hubs 21 Outer Bearing Cup Outer Bearing Cup (6K LT) Outer Bearing Cone Grease Cap EZ Lube 2.44" HUBS COMPLETE * 6K Light Duty Only Part # Ref # Description Bolt Circle * 6K Light Duty Only STUDS & WHEEL NUTS 12 x 2 BRAKES Item Part # Ref # Description Item Part # Ref # 14 7700109 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud** 22 6400010 23-105 15 7700142 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud** 6400036 23-106 LH Electric Assembly 16 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 6400046 23-324 RH Electric Assembly 17 7700045 6-80 ½ -20 60 Deg Cone Nut 6400047 23-325 LH Hydraulic Uni-Servo Assembly 18 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 6400068 23-322 RH Hydraulic Uni-Servo Assembly 19 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6400097 23-323 LH Hydraulic Duo-Servo Assembly Item 14 - Hubs prior to 1/2004 6400008 23-342 RH Hydraulic Duo-Servo Assembly Item 15 - Hubs after to 1/2004 6400009 23-343 LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly ** Stud length measured under head to end of stud. WWW.TEXTRAIL.COM Description A-37 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S NEV-R-LUBE PARTS 42MM HUBS WITH BEARING AND WHEEL STUDS Description Bolt Circle 8-388-80 ½"-20 Stud 5.2K 6 on 5.50 Part # Ref # Description Item 1 7700129 5-147-1 Spindle Washer 42MM Hubs & Drums 2 7700126 6-183 Spindle Nut 42MM 3 7700127 92-2 Torque Information Disc 35, 42 & 50MM 4 7700128 69-96 Snap Ring 7700109 7-122 5 7700130 21-85 Hub Cap 42MM 7800065 31-73-3 42MM Bearing Cartridge 7800066 69-95 42MM Bearing Retainer 7 Part # Ref # Item 7650100 Includes: 12 x 2 BRAKES Item Part # Ref # Description 6 6400010 23-105 LH Electric 6K Assembly 6400036 23-106 6400046 23-324 6400047 ½"-20 x 1.84" Long Pressed Wheel Stud STUDS & WHEEL NUTS Item Part # Ref # Description 8 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM RH Electric 6K Assembly 9 7700045 6-80 ½ -20 60 Deg Cone Nut LH Hydraulic Uni-Servo Assembly 10 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 23-325 RH Hydraulic Uni-Servo Assembly 11 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6400068 23-322 LH Hydraulic Duo-Servo Assembly 6400097 23-323 RH Hydraulic Duo-Servo Assembly 6400066 23-338 LH Hydraulic Uni-Servo 7K Assembly 6400067 23-339 RH Hydraulic Uni-Servo 7K Assembly 6400069 23-334 LH Hydraulic Uni-Servo 7K Assembly w/Park 6400070 23-335 RH Hydraulic Uni-Servo 7K Assembly w/Park 6400071 23-336 LH Hydraulic Duo-Servo 7K Assembly 6400072 23-337 RH Hydraulic Duo-Servo 7K Assembly 6400008 23-342 LH Hydraulic Free Backing Assembly 6400009 23-343 RH Hydraulic Free Backing Assembly WWW.TEXTRAIL.COM A-38 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES Nev-R-Lube #42 Spindle (6K LIGHT DUTY - 6K HEAVY DUTY) Replacement Hub & Hub and Drum Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S #42 Spindle (6K - 7K) Replacement Hub & Hub and Drum Components OIL / GREASE LUBE PARTS Item Part # Ref # Description 1 7700073 10-36 Double Lip Seal 3.376"OD x 2.250"ID 7700086 10-10 Double Lip Seal 3.376"OD x 2.125"ID ** 7700088 10-63 Unitized Oil Seal 3.376"OD x 2.250"ID HUBS Item Part # Ref # Description Bolt Circle Hubs & Drums 31 32 7650047 8-174-5 9/16” Stud Grease 5.2-7K 5 Spoke 7650165 8-174-6 9/16” Stud Oil 5.2-7K 5 Spoke 8 on 6.50 7800071-01 Bearing Kit 865-Hub (Includes Items 1-6) 7650045 8-219-4 ½” Stud Grease 5.2-7K * 7800070-01 Bearing Kit UTG-Hub (Includes Items 1-6) 7650050 8-219-13 9/16” Stud Grease 5.2-7K 8 on 6.50 2 7800026 25580 Inner Bearing Cup 7650113 8-219-18 5/8" Stud Grease 5.2-7K 8 on 6.50 3 7800054 25520 Inner Race Cone 7650044 8-219-9 ½” Stud Oil 5.2-7K 8 on 6.50 4 7800056 14276 Outer Bearing Cup (865) 7650166 8-219-20 9/16” Stud Oil 5.2-7K 8 on 6.50 * 7800055 15245 Outer Bearing Cup *(UTG) 7650115 8-219-26 5/8" Stud Oil 5.2-7K 8 on 6.50 5 7800017 14125A Outer Bearing Cone (865) Plain Hubs Outer Bearing Cone *(UTG) 33 * 7800027 15123 7650083 8-231-9 ½” Stud Grease 5.2-7K 8 on 6.50 6 8750003 19-2 Cotter Pin 7650086 8-231-18 9/16” Stud Grease 5.2-7K 8 on 6.50 7 8750005 6-1 Spindle Nut 7650164 8-231-20 5/8" Stud Grease 5.2-7K 8 on 6.50 8 7700186 21-39 Grease Cap 2.72" (865) 7650008 8-231-16 ½” Stud Oil 5.2-7K 8 on 6.50 * 7700027 21-1 Grease Cap 2.44" (UTG) 9 7700018 21-43-1 Grease Cap EZ Lube 2.72" (865) 7700019 21-43-2 Grease Cap EZ Lube Chrome 2.72" (865) 7700016 21-42-1 Grease Cap 2.45" EZ Lube (UTG) 10 7700053 85-1 ** 7700029-01 11 7700055 * * 12 7700029 * Rubber Plug EZ Lube Item Oil Cap Kit (Includes Items 11-13) Part # Ref # Description Bolt Circle Hubs & Drums 10-45 O-ring (865) 7650047-02 8-174-90 9/16" Stud Grease 5.2-7K 5 Spoke 10-59 O-ring (UTG) 7650045-02 8-219-9D ½” Stud Grease 5.2-7K 8 on 6.50 21-35 Oil Cap (865) 7650045-03 8-219-9B ½” Stud EZ 5.2-7K 8 on 6.50 21-40 Oil Cap (UTG) 7650044-03 8-219-9E ½” Stud Oil 5.2-7K 8 on 6.50 7650083-02 8-231-9E ½” Stud Grease 5.2-7K 8 on 6.50 Item Part # Ref # 34 6400010 23-105 6400036 23-106 RH Electric DXQ-6K Assy 6400081 23-458 LH Electric Forward Self Adjust 6K Assy 13 7700052 46-32 Oil Cap Plug 14 7700051 46-52 Oil Fill Hole Plug 15 8750034 5-57 Spindle D-Washer 1" ID 6-5 Rim Clamp Nut 9/16"-18 16 HUBS COMPLETE Includes bearings, seal, cap & lug nuts. 17 7700058 15-2 Rim Clamp 14.5" MH & Utility 18 8750006 6-191 Special Jam Nut EZ Lube (After '02) 19 8750030 6-190 Nut Retainer EZ Lube (After '02) 8750040 5-101 Tang Washer EZ Lube (Before '02) * UTG Hub Only Plain Hubs 12 x 2 BRAKES ** Oil Lube Only STUDS & WHEEL NUTS Description LH Electric DXQ-6K Assy 6400082 23-459 RH Electric Forward Self Adjust 6K Assy Item Part # Ref # Description 6400037 23-180 LH Electric 7K Assy 20 7700109 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud** 6400038 23-181 RH Electric 7K Assy 21 7700142 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud** 6400083 23-464 LH Electric Forward Self Adjust 7K Assy 22 7700112 7-132 9/16"-18 x 2.30" Long Pressed Wheel Stud** 6400084 23-465 RH Electric Forward Self Adjust 7K Assy 23 7700156 7-232 5/8"-18 x 2.75" Long Pressed Wheel Stud** 6400066 23-338 LH Hydraulic Uni-Servo 7K Assy 24 7700090 25-11 9/16-18 x 3.06" Long Wheel Stud** 6400067 23-339 RH Hydraulic Uni-Servo 7K Assy 25 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 6400069 23-334 LH Hydraulic Uni-Servo 7K Park Assy 26 7700045 6-80 ½ -20 60 Deg Cone Nut 6400070 23-335 RH Hydraulic Uni-Servo 7K Park Assy 27 7700036 6-53 9/16"-18 60 Deg Cone Nut 6400071 23-336 LH Hydraulic Duo-Servo 7K Assy 28 7700048 6-109 5/8"-18 90 Deg Cone Nut 6400072 23-337 RH Hydraulic Duo-Servo 7K Assy 29 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 6400008 23-342 LH Hydraulic Free Backing 7K Assy 30 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6400009 23-343 RH Hydraulic Free Backing 7K Assy Item 20 - Hubs prior to 1/2004 Item 21 - Hubs after to 1/2004 Item 24 -UTG Hub Only ** Stud length measured under head to end of stud. WWW.TEXTRAIL.COM A-39 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S NEV-R-LUBE PARTS 42MM & 50MM Item 1 Part # HUBS WITH BEARING AND WHEEL STUDS Ref # Description Item Hubs & Drums 7700131 5-149 Spindle Washer 50MM 7700129 5-147-1 Spindle Washer 42MM 7 Part # Ref # 7650101 8-385-82 Description Bolt Circle ½"-20 Stud 6-7K 8 on 6.50 2 7700126 6-183 Spindle Nut 3 7700127 92-2 Torque Information Disc 35, 42 & 50MM 7700109 7-122 Includes: 4 7700128 69-96 Snap Ring 7800067 31-71-3 50MM Bearing Cartridge 5 7700132 21-86 Hub Cap 50MM 7800068 69-93 50MM Bearing Retainer 7700130 21-85 Hub Cap 42MM 7650089 8-385-81 ½"-20 x 1.84" Long Pressed Wheel Stud 9/16"-18 Stud 6-7K 8 on 6.50 Includes: 7700123 7-223 12 x 2 BRAKES 7800067 31-71-3 9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer Item Part # Ref # Description 7800068 69-93 6 6400010 23-105 LH Electric Assembly 7650102 8-385-80 6400036 23-106 RH Electric Assembly 6400037 23-180 LH Electric 7K Assembly 7700145 7-224 6400038 23-181 RH Electric 7K Assembly 7800067 31-71-3 50MM Bearing Cartridge 6400066 23-338 LH Hydraulic Uni-Servo 7K Assembly 7800068 69-93 50MM Bearing Retainer 6400067 23-339 RH Hydraulic Uni-Servo 7K Assembly 7650100 8-388-80 6400069 23-334 LH Hydraulic Uni-Servo 7K Assembly w/Park 6400070 23-335 RH Hydraulic Uni-Servo 7K Assembly w/Park 7700109 7-122 6400071 23-336 LH Hydraulic Duo-Servo 7K Assembly 7800065 31-73-3 42MM Bearing Cartridge 6400072 23-337 RH Hydraulic Duo-Servo 7K Assembly 7800066 69-95 42MM Bearing Retainer 6400008 23-342 LH Hydraulic Free Backing Assembly 6400009 23-343 RH Hydraulic Free Backing Assembly Item Part # Ref # Description 8 7700176 6-201 9 7700045 6-80 ½ -20 60 Deg Cone Nut 10 7700036 6-53 9/16"-18 60 Deg Cone Nut Zinc Plated 11 7700048 6-109 5/8"-18 60 Deg Cone Nut Zinc Plated 12 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 13 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 5/8"-18 Stud 6-7K 8 on 6.50 Includes: 5/8"-18 x 2.5" Long Pressed Wheel Stud ½"-20 Stud 6K 6 on 5.50 Includes: ½"-20 x 1.84" Long Pressed Wheel Stud STUDS & WHEEL NUTS WWW.TEXTRAIL.COM A-40 ½ -20 60 Deg Cone Nut Standard Torq-NGoTM 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES Nev-R-Lube #42 Spindle (6K - 7K) Replacement Hub & Hub and Drum Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 7.2K Replacement Hub & Hub and Drum Components OIL / GREASE LUBE PARTS HUBS Item Part # Ref # Description Item 1 7700073 10-36 Double Lip Seal 3.376"OD x 2.250"ID Hubs & Drums 24 * 7700088 10-63 Unitized Oil Seal 3.376"OD x 2.250"ID 2 7800026 25580 Inner Bearing Cup 3 7800054 25520 Inner Race Cone 4 7800057 02420 Outer Bearing Cup 5 7800028 02475 Outer Bearing Cone 6 8750003 19-2 7 8750005 6-1 8 7700186 21-39 9 7700018 21-43-1 Grease Cap EZ Lube 2.72" 7700019 21-43-2 Grease Cap EZ Lube Chrome 2.72" 10 7700053 85-1 * 7700029-01 11 7700055 10-45 O-ring (865) 12 7700029 21-35 Oil Cap (865) 13 7700052 46-32 Oil Cap Plug 7700051 46-52 Oil Fill Hole Plug Part # 7650197 Ref # 8-393-4 8-393-6 5/8” Stud Grease 7.2K 7650114 8-393-3 9/16” Stud Oil 7.2K 7650119 8-393-5 5-57 Spindle D-Washer 1" ID Special Jam Nut EZ Lube (After '02) 16 8750030 6-190 Nut Retainer EZ Lube (After '02) 8750040 5-101 Tang Washer EZ Lube (Before '02) * Oil Lube Only 8 on 6.50 5/8” Stud Oil 7.2K 8 on 6.50 (After 5/00 with cast backing plate) 7650061 8-355-13 9/16” Stud Grease 7.2K 8 on 6.50 (Before 5/00 with stamped backing plate) 7650199 8-355-12 9/16” Stud Oil 7.2K Oil Cap Kit (Includes Items 11-13) 6-191 8 on 6.50 (After 5/00 with cast backing plate) Rubber Plug EZ Lube 8750034 8 on 6.50 (After 5/00 with cast backing plate) Spindle Nut 8750006 9/16” Stud Grease 7.2K 7650154 Grease Cap 2.72" 15 Bolt Circle (After 5/00 with cast backing plate) Cotter Pin 14 Description 8 on 6.50 (Before 5/00 with stamped backing plate) 8-355-15 5/8” Stud Grease 7.2K 8 on 6.50 (Before 5/00 with stamped backing plate) 8-355-14 5/8” Stud Oil 7.2K 8 on 6.50 (Before 5/00 with stamped backing plate) HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Item Part # Ref # Description Bolt Circle 9/16" Stud Grease 7.2K 8 on 6.50 Hubs & Drums 7650197-02 8-393-91 (After 5/00 with cast backing plate) STUDS & WHEEL NUTS Item Part # Ref # Description 17 7700145 7-224 5/8"-18 x 2.50" Pressed Wheel Stud** 18 7700123 7-223 9/16"-18 x 2.01" Pressed Wheel Stud** 19 7700036 6-53 9/16"-18 60 Deg Cone Nut Zinc Plated 20 7700048 6-109 5/8"-18 60 Deg Cone Nut Zinc Plated 21 7700034 6-58 5/8"-18 Flange Nut 7650061-02 8-355-93 9/16" Stud Grease 7.2K 8 on 6.50 (Before 5/00 with stamped backing plate) 12 ¼ x 2 ½ BRAKES Item Part # Ref # 22 6450300 36-118-20 Dust Shield (not included with brake assembly) 36-110 Dust Shield Top (included with brake assembly) 36-110-01 Dust Shield Top (included with brake assembly) ** Stud length measured under head to end of stud. Description (After 5/00 with cast backing plate) (Before 5/00 with stamped backing plate) (Before 5/00 with stamped backing plate) 23 6400057 23-428 LH Electric 7.2K Assy (4-Bolt) 6400058 23-429 RH Electric 7.2K Assy (4-Bolt) 6400011 23-370 LH Electric 7.2K Assy (9-Bolt) 6400012 23-369 RH Electric 7.2K Assy (9-Bolt) (After 5/00 with cast backing plate) (After 5/00 with cast backing plate) (Before 5/00 with stamped backing plate) (Before 5/00 with stamped backing plate) WWW.TEXTRAIL.COM A-41 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Nev-R-Lube 7.2K - 8K Replacement Hub & Hub and Drum Components 7.2K NEV-R-LUBE NEV-R-LUBE PARTS 50MM HUBS WITH BEARING AND WHEEL STUDS Item Part # Ref # Description Item 1 7700131 5-149 Spindle Washer 50MM Hubs & Drums Part # 2 7700126 6-183 Spindle Nut 3 7700127 92-2 Torque Information Disc 35, 42 & 50MM 4 7700128 69-96 Snap Ring 7700123 7-223 5 7700132 21-86 Hub Cap 50MM 7800067 31-71-3 8 Ref # 8-395-80 69-93 8-395-81 12-1/4 x 2-1/2 BRAKES Part # Ref # 6 6450113 36-115-20 7 6400057 6400058 Bolt Circle 9/16” Stud Nev-R-Lube 7.2K 8 on 6.50 Includes: 7800068 Item Description 9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer 5/8” Stud Nev-R-Lube 7.2K 8 on 6.50 Includes: Description 7700145 7-224 Dust Shield 7800067 31-71-3 50MM Bearing Cartridge 23-428 LH Electric 7.2K Assembly 7800068 69-93 50MM Bearing Retainer 23-429 RH Electric 7.2K Assembly 5/8"-18 x 2.5" Long Pressed Wheel Stud WHEEL NUTS Item Part # Ref # Description 9 7700036 6-53 9/16"-18 60 Deg Cone Nut Zinc Plated 7700048 6-109 5/8"-18 60 Deg Cone Nut Zinc Plated 7700034 6-58 5/8"-18 Flange Nut Zinc Plated 8K NEV-R-LUBE NEV-R-LUBE PARTS 50MM Item Part # Ref # HUBS WITH BEARING AND WHEEL STUDS Description Item Hubs & Drums 1 7700131 5-149 Spindle Washer 50MM 2 7700126 6-183 Spindle Nut 3 7700127 92-2 Torque Information Disc 35, 42 & 50MM 4 7700128 69-96 Snap Ring 5 7700132 21-86 Hub Cap 50MM Part # 8 Ref # Description Bolt Circle 8-389-80 5/8” Stud Nev-R-Lube 8K 8 on 6.50 Includes: 7700145 7-224 7800067 31-71-3 50MM Bearing Cartridge 7800068 69-93 50MM Bearing Retainer 12-1/4 x 3-3/8 BRAKES 8-389-81 5/8"-18 x 2.5" Long Pressed Wheel Stud 9/16” Stud Nev-R-Lube 8K 8 on 6.50 Includes: Item Part # Ref # 6 6450113 36-115-20 Description 7700123 7-223 Dust Shield 7800067 31-71-3 50MM Bearing Cartridge 7 6400039 6400040 23-434 LH Electric 8K Assembly 7800068 69-93 50MM Bearing Retainer 23-435 RH Electric 8K Assembly 6400041 23-402 LH Hydraulic Duo-Servo 8K Assembly 6400042 23-403 RH Hydraulic Duo-Servo 8K Assembly WWW.TEXTRAIL.COM 9/16"-18 x 2" Long Pressed Wheel Stud WHEEL NUTS Item Part # Ref # Description 9 7700036 6-53 9/16”-18 60 Deg Cone Nut Zinc Plated 7700048 6-109 5/8”-18 60 Deg Cone Nut Zinc Plated A-42 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 8K Replacement Hub & Hub and Drum Components OIL LUBE PARTS Item Part # Ref # Description 1 7700073 10-36 Double Lip Seal 3.376"OD x 2.250"ID 7700088 10-63 Unitized Oil Seal 3.376"OD x 2.250"ID 2 7800026 25580 Inner Bearing Cup 3 7800054 25520 4 7800057 02420 5 7800028 02475 Outer Bearing Cone 6 8750003 19-2 Cotter Pin 7 8750005 6-1 Spindle Nut 8 7700055 10-45 O-ring 9 7700029 21-35 Oil Cap 10 7700052 46-32 Oil Cap Plug 7700051 46-52 Oil Fill Hole Plug 7700029-01 HUBS Item Part # Ref # Description Bolt Circle Hubs & Drums 8-285-8 5/8” Stud Grease 8K 8 on 6.50 7650155 8-285-11 9/16" Stud Grease 8K 8 on 6.50 Inner Race Cone 7650051 8-285-10 5/8” Stud Oil 8K 8 on 6.50 Outer Bearing Cup 7650053 8-285-9 9/16” Stud Oil 8K 8 on 6.50 7650138 8-287-14 9/16” Stud Oil 8K 8 on 6.50 7650212 8-287-11 9/16” Stud Grease 8K 8 on 6.50 Oil Cap Kit (Includes Items 8-10) Grease Cap 2.72" 21 Plain Hubs HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Item Part # Ref # Description Bolt Circle 7700186 21-39 11 7700018 21-43-1 Grease Cap EZ Lube 2.72" 7650155-03 8-285-95 9/16” Stud EZ Lube 8K 8 on 6.50 7700019 21-43-2 Grease Cap EZ Lube Chrome 2.72" 7650051-03 8-285-93 5/8” Stud Oil 8K 8 on 6.50 12 7700053 85-1 Rubber Plug EZ Lube 7650053-02 8-285-92 9/16” Stud Oil 8K 8 on 6.50 13 8750034 5-57 Spindle D-Washer 1" ID 14 8750006 6-191 Special Jam Nut EZ Lube (After '02) 15 8750030 6-190 Nut Retainer EZ Lube (After '02) 8750040 5-101 Tang Washer EZ Lube (Before '02) STUDS & WHEEL NUTS Hubs & Drums Plain Hubs 12 1/4 x 3 3/8 BRAKES Item Part # Ref # Description 22 6450113 36-115-20 Dust Shield 23 6400039 23-434 LH Electric 8K Assy Item Part # Ref # Description 6400040 23-435 RH Electric 8K Assy 16 7700036 6-53 9/16"-18 60 Deg Cone Nut 6400041 23-402 LH Hydraulic Duo-Servo 8K Assy 17 7700048 6-109 5/8"-18 90 Deg Cone Nut 6400042 23-403 RH Hydraulic Duo-Servo 8K Assy 18 7700034 6-58 5/8"-18 Flange Nut 19 7700112 7-132 9/16"-18 x 2.3 Pressed Wheel Stud** 20 7700156 7-232 5/8"-18 x 2.75 Pressed Wheel Stud** ** Stud length measured under head to end of stud. WWW.TEXTRAIL.COM A-43 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12" x 2" Electric Brake Item 1 2 3 4 5 6 7 8 9 Part # 6450135 6450136 6450228 6450248 6450226 6450007 6450099 6450307 6450038 6450001 Ref # 47-107 47-108 46-9 5-67 46-18 43-4 27-5 6-193 46-7 46-16 Qty/Brk 1 1 2 1 1 1 2 5 1 1 Description LH Actuating Arm RH Actuating Arm Retractor Spring Wing Washer for Brake Shoe Adjuster Screw Spring Adjuster Screw Assembly Magnet Wire Retaining Clip 3/8"-24 Brake Mounting Nut Washer Assembly Adjuster Plug Wire Grommet 0.437 Dia. DXQ 6K LIGHT DUTY - 6K HEAVY DUTY 10 6400010 6400036 6450166-01 11 12 13 14 15 6450227 6450195 6450067 6450222 6450187 23-105 23-106 71-105 42-99-1 46-80 27-9 71-48 46-77 49-11 1 1 1 1 1 1 1 2 2 LH Electric Assembly RH Electric Assembly Magnet Kit 5.2-6K Oval Magnet for Dexter 12” Electric Brakes Magnet Spring Magnet Retaining Clip Shoe & Lining Kit (Includes Item 14-15) Shoe Hold Down Spring & Cup Shoe Hold Down Pin DXQ 7K 10 6400037 6400038 6450161-01 11 12 13 14 15 6450227 6450195 6450084 6450222 6450187 23-180 23-181 71-125 42-101-1 46-80 27-9 71-127 46-77 49-11 WWW.TEXTRAIL.COM 1 1 1 1 1 1 1 2 2 LH Electric Assembly RH Electric Assembly Magnet Kit 7K Oval Magnet for Dexter 12” Electric Brakes Magnet Spring Magnet Retaining Clip Shoe & Lining Kit (Includes Item 14-15) Shoe Hold Down Spring & Cup Shoe Hold Down Pin A-44 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12” Electric Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12” FSA Electric Brake Assemblies & Components 12" x 2" Forward Self Adjusting (FSA) Electric Brake Item Part # Ref # Qty/Brk 1 6450135 47-107 1 LH Actuating Arm 6450136 47-108 1 RH Actuating Arm 2 6450228 46-9 2 Retractor Spring 3 6450248 5-67 1 Wing Washer for Brake Shoe 4 *** 46-139 1 Adjuster Screw Spring 5 *** 48-22 1 LH Adjuster Screw Assembly *** 48-23 1 RH Adjuster Screw Assembly 6 6450099 27-5 2 Magnet Wire Retaining Clip 7 6450307 6-193 5 3/8"-24 Brake Mounting Nut Washer Assembly 8 6450038 46-7 1 Adjuster Plug 9 6450001 46-16 1 Wire Grommet 0.437 Dia. 16 *** 71-529 1 Hook for FSA Cable 17 *** 71-528 1 FSA Adjuster Cable 18 *** 71-530-2 1 LH Adjusting Lever *** 71-530-1 1 RH Adjusting Lever *** 46-140 1 LH FSA Lever Spring *** 46-141 1 RH FSA Lever Spring 19 WWW.TEXTRAIL.COM A-45 Description 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S Forward Self-Adjusting (FSA) - DXQ 6K LIGHT DUTY - 6K HEAVY DUTY 10 6400081 23-458 1 LH FSA Electric Assembly 6400082 23-459 1 RH FSA Electric Assembly 6450166-01 71-105 1 Magnet Kit 42-99-1 1 5.2-6K Oval Magnet for Dexter 12” Electric Brakes 11 6450227 46-80 1 Magnet Spring 12 6450195 27-9 1 Magnet Retaining Clip 13 6450309 71-673 1 LH Shoe & Lining Kit (Includes Item 14-15) 6450310 71-674 1 RH Shoe & Lining Kit (Includes Item 14-15) 14 6450222 46-77 2 Shoe Hold Down Spring & Cup 15 6450187 49-11 2 Shoe Hold Down Pin Forward Self-Adjusting (FSA) - DXQ 7K 10 6400083 23-464 1 LH FSA Electric Assembly 6400084 23-465 1 RH FSA Electric Assembly 6450161-01 71-125 1 Magnet Kit 42-101-1 1 7K Oval Magnet for Dexter 12” Electric Brakes 11 6450227 46-80 1 Magnet Spring 12 6450195 27-9 1 Magnet Retaining Clip 13 6450311 71-675 1 LH Shoe & Lining Kit (Includes Item 14-15) 6450312 71-676 1 RH Shoe & Lining Kit (Includes Item 14-15) 14 6450222 46-77 2 Shoe Hold Down Spring & Cup 15 6450187 49-11 2 Shoe Hold Down Pin *** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits 12" x 2" FSA Electric Brake Service Repair Kit 6451003 71-679 FSA Brake Service Repair Kit for 1-Axle Consisting of the following: 7 *** 46-139 2 Adjuster Screw Spring 8 *** 48-22 1 LH Adjuster Screw Assembly 8 *** 48-23 1 RH Adjuster Screw Assembly 12 *** 46-140 1 LH Lever Spring *** 46-141 1 RH Lever Spring *** 71-532-1 1 LH Adjusting Lever *** 71-532-2 1 RH Adjusting Lever 14 *** 71-533 1 Adjuster Cable 15 *** 71-529 2 Hook for FSA Cable 13 WWW.TEXTRAIL.COM A-46 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12” FSA Electric Brake Assemblies & Components Continued... AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12” FSA Electric Brake Assemblies & Components 12" x 2" Electric Brake with Parking Feature Item Part # 1 2 6450226 Ref # Qty/Brk 39-25 1 LH Pivot Pin & Cam Sub-Assembly 39-26 1 RH Pivot Pin & Cam Sub-Assembly 39-48 1 LH Actuating Cam 39-49 1 RH Actuating Cam 46-5 1 Retractor Spring 46-18 1 Adjuster Screw Spring Description 3 6450007 43-4 1 Adjuster Screw Assembly 4 6450166-01 71-105 1 Magnet Kit 42-99-1 1 5.2-6K Oval Magnet for Dexter 12” Electric Brakes 5 6450195 27-9 1 Magnet Retaining Clip 6 6450227 46-80 1 Magnet Spring 7 6450135 47-107 1 LH Actuating Arm 6450136 47-108 1 RH Actuating Arm 8 6450099 27-5 2 Magnet Wire Retaining Clip 9 6450307 6-193 5 3/8"-24 Brake Mounting Nut Washer Assembly 10 6450038 46-7 1 Adjuster Plug 11 6450001 46-16 1 Wire Grommet 0.437 Dia. 12 9000143 6-11 1 Pivot Pin Locknut 5-41 1 Washer Plain 0.312 x 0.75 x 0.065 47-70 1 Actuating Lever 6-47 1 Anchor Post Locknut 38-68 1 Anchor Post & Bushing Assembly 13 14 9000139 15 DXQ 5.2K - 6K Item Part # Ref # Qty/Brk 23-112 1 LH Electric Assembly 23-113 1 RH Electric Assembly Description 16 6450067 71-48 1 Shoe & Lining Kit (Includes Item 20-21) 17 6450222 46-77 2 Shoe Hold Down Spring & Cup 18 6450187 49-11 2 Shoe Hold Down Pin Item Part # Ref # Qty/Brk 23-328 1 LH Electric Assembly 6K Description 23-329 1 RH Electric Assembly 16 6450084 71-127 1 Shoe & Lining Kit (Includes Item 20-21) 17 6450222 46-77 2 Shoe Hold Down Spring & Cup 18 6450187 49-11 2 Shoe Hold Down Pin WWW.TEXTRAIL.COM A-47 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12" x 2" Hydraulic Brake Item Part # Ref # 1 6450249 46-101 2 6451004 5-113 3 6450229 46-102 4 43-29 5 6450256 54-60 6 6450107 54-62 6450108 54-63 6450250 54-64 6450251 54-65 8 6450308 6-193 9 6450038 46-7 10 6451005 87-1 7 Qty/ Description Brk 1 Retractor Spring 1 Anchor Post Washer 1 Adjusting Screw Spring 1 Adjuster Assembly 1 / 2 Cylinder Push Rod US (1) DS (2) 1 LH Duo-Servo Wheel Cylinder 1 RH Duo-Servo Wheel Cylinder 1 LH Uni-Servo Wheel Cylinder 1 RH Uni-Servo Wheel Cylinder 5 3/8"-24 Brake Mounting Nut & Washer Assembly 1 Adjuster Slot Plug 2 Sems (screw & washer assembly) 5/16"-18 x 0.62 6K Light Duty 6400068 23-322 1 6400097 23-323 1 6400046 23-324 1 6400047 23-325 1 11 6450052 71-268 1 12 6450222 46-77 1 49-12 1 13 LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin 6K - 7K 11 12 13 6400071 23-336 1 6400072 23-337 1 6400066 23-338 1 6400067 23-339 1 6450071 71-269 1 6450070 71-270 1 6450222 46-77 1 49-12 1 WWW.TEXTRAIL.COM LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin A-48 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12” Hydraulic Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12” HFB Brake Assemblies & Components 12" x 2" Hydraulic Free Backing Brake Item Qty/ Description Brk Part # Ref # 6400008 23-342 1 LH HFB Brake Assembly 6400009 23-343 1 RH HFB Brake Assembly 1 12” HFB with Park Brake Assemblies & Components 12" x 2" Hydraulic Free Backing Brake with Parking Feature Item Part # Ref # Qty/ Brk 6400073 23-340 1 LH HFBP Brake Assembly 6400101 46-107-1 1 Shoe Lever Return Spring 1 Description 23-341 1 RH HFBP Brake Assembly 46-107-1 1 Shoe Lever Return Spring 46-101 1 Retractor Spring 2 6450249 46-101 1 Retractor Spring 2 6450249 3 9000143 6-11 1 5/16"-18 Lock Nut 3 9000143 6-11 1 5/16"-18 Lock Nut 4 6450053 71-394 1 LH Shoe & Lining Kit 6450083 71-395 1 RH Shoe & Lining Kit 5 6450222 46-77 1 Shoe Hold Down Spring & Cup Secondary 6 6450186 49-2 1 Shoe Hold Down Pin - Secondary 49-13 1 Shoe Hold Down Pin - Primary 46-6 1 Shoe Hold Down Spring - Primary 35-1 2 Shoe Hold Down Cup - Primary 46-123 1 Adjusting Screw Spring 6450053 71-394 1 LH Shoe & Lining Kit 6450083 71-395 1 RH Shoe & Lining Kit 5 6450222 46-77 1 Shoe Hold Down Spring & Cup Secondary 6 6450186 49-2 1 Shoe Hold Down Pin - Secondary 49-13 1 Shoe Hold Down Pin - Primary 4 7 7 46-6 1 Shoe Hold Down Spring - Primary 8 35-1 2 Shoe Hold Down Cup - Primary 9 43-28 1 Adjuster Assembly 46-123 1 Adjusting Screw Spring 10 47-119-1 1 Strut for Parking Brake 10 43-28 1 Adjuster Assembly 11 37-69-2 1 Travel Link Zinc 11 37-69-2 1 Travel Link Zinc 12 40-244-1 1 Shoe Lever 12 40-244-1 1 Shoe Lever 13 69-55 1 Retainer Horseshoe Park Lever 13 7-210 1 Screw 14 5-112 1 Washer 3/8" x 0.013 5-64 1 Washer 0.382 x 1.28 x 0.1196 Zinc Plated 15 7-210 1 Screw 16 5-64 1 Washer 0.382 x 1.28 x 0.1196 Zinc Plated 46-108-1 1 Primary Shoe Return Spring 47-110-1 1 LH Parking Lever and Pin 47-111-1 1 RH Parking Lever and Pin 8 9 6450286 14 15 6451007 46-108-1 1 Primary Shoe Return Spring 16 6450308 6-193 5 3/8"-24 Brake Mounting Nut & Washer Assembly 17 6450256 54-60 1 Cylinder Push Rod 18 6450250 54-64 1 LH Uni-Servo Wheel Cylinder 6450251 54-65 1 RH Uni-Servo Wheel Cylinder 19 6451005 87-1 2 Sems (screw & washer assembly) 5/16"-18 x 0.62 20 6450038 46-7 1 Adjuster Slot Plug DEMCO 12” HFB Marine Brakes 6400086 6400085 SB42029 SB42028 1 1 LH Hydraulic Brake AssemblyGalvanized 17 6450190 6451007 18 19 6450308 6-193 5 3/8"-24 Brake Mounting Nut & Washer Assembly 20 6450256 54-60 1 Cylinder Push Rod 21 6450250 54-64 1 LH Uni-Servo Wheel Cylinder 6450251 54-65 1 RH Uni-Servo Wheel Cylinder 6451005 87-1 2 Sems (screw & washer assembly) 5/16"-18 x 0.62 6450038 46-7 1 Adjuster Slot Plug 6450082 71-515 1 Park Brake Cable 22 23 RH Hydraulic Brake AssemblyGalvanized WWW.TEXTRAIL.COM 6450286 A-49 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12" x 2" Hydraulic Brake with Parking Feature Item Part # Ref # 1 6450249 46-101 1 Retractor Spring 5-113 1 Anchor Post Washer 2 Qty/Brk Description 46-102 1 Adjusting Screw Spring 4 43-29 1 Adjuster Assembly 5 46-103 1 Parking Strut Spring 6 47-109 1 Parking Strut 3 7 6450229 6450190 8 69-55 1 Retainer Horseshoe Park Lever 5-112 1 Washer 3/8" x 0.013 Cylinder Push Rod US (1) DS (2) 9 6450256 54-60 1/2 10 6450107 54-62 1 LH Duo-Servo Wheel Cylinder 6450108 54-63 1 RH Duo-Servo Wheel Cylinder 6450250 54-64 1 LH Uni-Servo Wheel Cylinder 11 6450251 12 54-65 1 RH Uni-Servo Wheel Cylinder 47-110-1 1 LH Parking Lever and Pin 47-111-1 1 RH Parking Lever and Pin 13 6450308 6-193 5 3/8"-24 Brake Mounting Nut & Washer Assembly 14 6451005 87-1 2 Sems (screw & washer assembly) 5/16"-18 x 0.62 15 6450038 46-7 1 Adjuster Slot Plug 6450082 71-515 1 Park Brake Cable 23-318 1 LH Duo-Servo Hydraulic Brake Assembly 23-319 1 RH Duo-Servo Hydraulic Brake Assembly 23-320 1 LH Uni-Servo Hydraulic Brake Assembly 23-321 1 RH Uni-Servo Hydraulic Brake Assembly 71-268 1 Shoe & Lining Kit 6K Light Duty 16 6450052 17 6450222 18 46-77 1 Shoe Hold Down Spring & Cup 49-12 1 Shoe Hold Down Pin 23-332 1 LH Duo-Servo Hydraulic Brake Assembly 6K - 7K 16 17 18 23-333 1 RH Duo-Servo Hydraulic Brake Assembly 6400069 23-334 1 LH Uni-Servo Hydraulic Brake Assembly 6400070 23-335 1 RH Uni-Servo Hydraulic Brake Assembly 6450071 71-269 1 LH Shoe & Lining Kit 6450070 71-270 1 RH Shoe & Lining Kit 6450222 46-77 1 Shoe Hold Down Spring & Cup 49-12 1 Shoe Hold Down Pin WWW.TEXTRAIL.COM A-50 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12” Hydraulic Park Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 6,000 lb Integral Disc Brake Assemblies & Components Rotary Style 12" Integral 6 on 5.5" Bolt Pattern 1/2" Bolts Fits all 5-Bolt Brake Flange with #42 Spindle REPLACEMENT PARTS Ref # Description Item Part # 1 6450558 DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 2 6450556 DBCMHBS 3 6450560 4 5 Stainless Steel Sleeve 16 7700073 10-36 Double Lip Seal 3.376" OD x 2.250" ID DBCMHBSB Rubber Bushing for Guide Bolt 17 7800026 25580 Inner Bearing Cone 6450552 DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF 18 7800054 25520 Inner Bearing Cup 6450553 DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) 19 7800027 15123 Outer Bearing Cup 6451000 DBCNPTBBS Bleed Screw Port 1/4"-28 20 7800055 15245 Outer Bearing Cone 6451001 DBCNPTADP Bleed Screw Adapter 1/8" 21 8750033 5-23 Spindle D-Washer 22 8750005 6-1 Spindle Nut DBC225E 6450528 DBC225SCAD 6450529 DBC225SS 7 6450548 DBC225PISTONSS 8 6450550 9 10 11 12 MOUNTING HARDWARE Description Part # 6450527 Ref # Kits contain parts for one complete axle Item Caliper comes w/ items 1-9 6 For 15" & Larger Wheels Item 16-17 & 20-27 Not Included in Kits Below Caliper E-Coat 23 8750003 19-2 Cotter Pin Caliper Silver Cadmium Plated 24 7700027 21-1 Grease Cap Caliper Stainless Steel 25 7700016 21-1-1 Grease Cap EZ Lube 2-1/4" Stainless Steel Piston 26 7700053 85-1 Rubber Plug EZ Lube DBC225SEAL Piston Rubber Seal 27 6450565 LB169 ½ -20 x 1.69 Pressed Wheel Stud 6450551 DBC225BOOT Rubber Dust Boot 7700109 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud 6450615 CMB12U Caliper Mounting Bracket E-Coat 6450739 LB20 ½ -20 x 2" Long Pressed Wheel Stud 6450616 CMB12USCAD Caliper Mounting Bracket SCD 7700142 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud 6450630 DBC225SMPAD Brake Pads (Semi-Metallic) 7700176 6-201 ½ -20 60 Deg Cone Nut Standard Torq-N-GoTM 6450620 DBC225CERMPAD Brake Pads (Ceramic) 7700045 6-80 ½ -20 60 Deg Cone Nut 6450603 ROTORHUB12 655 12" Rotor/Hub Standard Automotive Finish 7700175 6-200 ½ -20 60 Deg Cone Nut Capped Torq-N-GoTM 6450604 ROTORHUB12E 655 12" Rotor/Hub E-Coat 7700043 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6450605 ROTORHUB12SCAD 28 655 12" Rotor/Hub Silver Cadmium Plated MOUNTING HARDWARE ROTOR ONLY KITS Not Included in Kits Below Includes Items 1 thru 12 Item Part # Ref # Description Part # Ref # 13 6450240 7-112 3/8"-24 x 0.88" Grade 5 Bolt Item 6450583 2HRCM12-K Axle Kit, STD Rotor, E-Coat Caliper 14 6450182 6-10 3/8-24" Grade 5 Nut 6450584 2HRCM12E-K Axle Kit, E-Coat 15 9000250 33621 3/8"-24 Lock Washer 6450585 2HRCM12ESCAD-K 6450586 DBI-6K-MAXX Axle Kit, MAXX Rotor and Caliper 6450587 DBI-6K-MAXX-SS Axle Kit, MAXX Rotor, SS Caliper For Salt Water applications it is recommended the use of Stainless Steel Hardware 6450586 6450584 WWW.TEXTRAIL.COM Description Axle Kit, E-Coat, SCAD Caliper 6450587 A-51 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 6,000 lb Slip-On Disc Brake Assemblies & Components Rotary Style 12" Slip -On 6 on 5.5" Bolt Pattern Fits all 5-Bolt Brake Flange with #42 Spindle REPLACEMENT PARTS Item Part # Ref # Description 1 DBCMHGB 6450558 Stainless Steel Guide Bolt M11 x 1.5 2 DBCMHBS 6450556 Stainless Steel Sleeve 3 DBCMHBSB 6450560 Rubber Bushing for Guide Bolt 4 DBCFIFMP90 6450552 Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 5 DBCNPTADPBBS 6450553 Items) DBCNPTBBS 6451000 Bleed Screw Port 1/4"-28 DBCNPTADP 6451001 Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 6 DBC225E 6450527 Caliper E-Coat DBC225SCAD 6450528 Caliper Silver Cadmium Plated DBC225SS 6450529 Caliper Stainless Steel 7 6450548 DBC225PISTONSS 2-1/4" Stainless Steel Piston 8 DBC225SEAL 6450550 Piston Rubber Seal 9 DBC225BOOT 6450551 Rubber Dust Boot 10 CMB12U 6450615 Caliper Mounting Bracket E-Coat CMB12USCAD 6450616 Caliper Mounting Bracket SCD CMB12USS 6450617 Caliper Mounting Bracket SS 11 DBC225SMPAD 6450630 Brake Pads (Semi-Metallic) DBC225CERMPAD 6450620 Brake Pads (Ceramic) 12 ROTOR12 6450598 655 12" Rotor Standard Automotive Finish ROTOR12E 6450599 655 12" Rotor E-Coat ROTOR12SCAD 6450600 655 12" Rotor Silver Cadmium Plated ROTOR12SS 6450601 655 12" Rotor Stainless Steel 6450577 6450579 WWW.TEXTRAIL.COM Kits contain parts for one complete axle For 15" & Larger Wheels MOUNTING HARDWARE Not Included in Kits Below Item Part # Ref # Description 13 7-112 6450240 3/8"-24 x 0.88" Grade 5 Bolt 14 6-10 6450182 3/8-24" Grade 5 Nut 15 33621 9000250 3/8"-24 Lock Washer For Salt Water applications it is recommended the use of Stainless Steel Hardware Item Part # 6450576 6450577 6450578 6450579 6450580 6450581 ROTOR ONLY KITS Includes Items 1 thru 12 Ref # Description 2RCM12-K Axle Kit, STD Rotor, E-Coat Caliper 2RCM12E-K Axle Kit, E-Coat 2RCM12ESCAD-K Axle Kit, E-Coat, SCAD Caliper DBSO-6K-MAXX Axle Kit, MAXX Rotor and Caliper DBSO-6K-MAXX-SS Axle Kit, MAXX Rotor, SS Caliper DBSO-6K-SS Axle Kit, Stainless Steel 6450581 A-52 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 7,000 lb Integral Disc Brake Assemblies & Components 6450680 Rotary Style 13" Integral Item 1 2 3 4 5 Part # 6450558 6450556 6450560 6450552 6450553 6451000 6451001 6 7 8 9 10 11 12 6450705 6450706 6450707 6450818 6450819 6450820 6450821 6450709 6450712 6450677 Fits all 5-Bolt Brake Flange with #42 Spindle For 16" & Larger Wheels REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 Ref # Item Part # 16 17 18 19 20 7700073 7800026 7800054 7800017 7800056 Bleed Screw Adapter 1/8" 21 8750033 Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel DBC250PISTONSCAD 2-1/2" Silver Cadmium Plated Piston DBC250PISTONSS 2-1/2" Stainless Steel Piston DBC250SEAL Piston Rubber Seal DBC250BOOT Rubber Dust Boot CMB1337 Caliper Mounting Bracket E-Coat CMB1337SCAD Caliper Mounting Bracket Silver Cadmium Plated 22 23 24 25 26 27 8750005 8750003 7700186 7700018 7700053 7700109 6450739 7700142 6450835 7700123 DBCNPTADP 6450713 CMB1337SS DBC250SMPAD 6450810 6450700 6450701 6450702 ROTORHUB13378E Caliper Mounting Bracket Stainless Steel 28 7700045 DBC250CERMPAD Brake Pads (Ceramic) 7700175 ROTORHUB13378 7700043 7700036 6450783 ROTORHUB13389 6450784 6450785 6450788 ROTORHUB13389E ROTORHUB13389SCAD ROTORHUB133810 6450789 ROTORHUB133810E 6450790 ROTORHUB133810SCAD 13 6450240 6450182 7700176 Brake Pads (Semi-Metallic) 1/2" 856 13" Rotor/Hub Standard Automotive Finish 1/2" 865 13" Rotor/Hub E-Coat 1/2" 865 13" Rotor/Hub Silver Cadmium Plated 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish Part # 15 8 on 6.5" Bolt Pattern 6450811 Item 14 6450690 ROTORHUB13378SCAD 6-10 Mounting Hardware Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 Double Lip Seal 3.376" OD x 2.250" ID 25580 Inner Bearing Cone 25520 Inner Bearing Cup 14125A Outer Bearing Cup 14276 Outer Bearing Cone 5-23 Spindle D-Washer Spindle Nut Cotter Pin 21-39 Grease Cap 21-43-1 Grease Cap EZ Lube 85-1 Rubber Plug EZ Lube 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud LB20 ½ -20 x 2" Long Pressed Wheel Stud 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud LB25 9/16"-18 x 2.5" Pressed Wheel Stud 7-223 9/16"-18 x 2" Pressed Wheel Stud ½ -20 60 Deg Cone Nut Standard Torq-N6-201 GoTM 6-80 ½ -20 60 Deg Cone Nut ½ -20 60 Deg Cone Nut Capped Torq-N6-200 GoTM 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6-53 9/16"-18 60 Deg Cone Nut 1/2" Rotor Only Kits 6-1 19-2 Includes Items 1 thru 12 Part # 6450674 6450675 2HRCM13378E-K Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat 5/8" 865 13" Rotor/Hub E-Coat 6450676 DBI-7K-MAXX Axle Kit, MAXX Rotor and Caliper 5/8" 865 13" Rotor/Hub Silver Cadmium Plated 6450677 DBI-7K-MAXX-SS Axle Kit, MAXX Rotor, SS Caliper Part # 6450679 6450680 9/16" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM13379-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM13379E-K Axle Kit, E-Coat 6450681 2HRCM13379SCAD-K Axle Kit, SCAD 6450682 2HRCM13379SCADSS-K Axle Kit, SCAD Rotor, SS Caliper Mounting Hardware Not Included in Kits Below Ref # Description 7-112 Kits contain parts for one complete axle Item Item 3/8"-24 x 0.88" Grade 5 Bolt 3/8-24" Grade 5 Nut 9000250 33621 3/8"-24 Lock Washer For Salt Water applications it is recommended the use of Stainless Steel Hardware Item WWW.TEXTRAIL.COM A-53 Ref # 2HRCM13378-K Part # 6450688 6450689 5/8" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM133710-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM133710E-K Axle Kit, E-Coat 6450690 2HRCM133710SCAD-K Axle Kit, SCAD 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 7,000 lb Slip-On Disc Brake Assemblies & Components Rotary Style 13" Slip -On Item Part # 1 6450558 2 6450556 3 6450560 4 6450552 5 6450553 6451000 6451001 8 on 65" Bolt Pattern Fits all 4-Bolt Brake Flange with #42 Spindle For 16" & Larger Wheels REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Ref # Mounting Hardware Not Included in Kits Below Item Part # Ref # Description 7-271 13 6450307 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 14 7030116 7/16" Lock Washer 6-17 15 6450181 7/16"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware Rotor Only Kits Caliper comes w/ items 1-9 6 6450705 DBC250E 6450706 DBC250SCAD 6450707 DBC250SS 6450818 Caliper E-Coat Caliper Silver Cadmium Plated Includes Items 1 thru 12 Part # Ref # Caliper Stainless Steel 6450655 2RCM13378-K DBC250PISTONSCAD 2-1/2" Silver Cadmium Plated Piston 6450656 2RCM13378E-K 6450819 DBC250PISTONSS 2-1/2" Stainless Steel Piston 6450657 DBSO-7K-MAXX 8 6450820 DBC250SEAL Piston Rubber Seal 6450658 DBSO-7K-MAXX-SS 9 6450821 DBC250BOOT Rubber Dust Boot 6450659 DBSO-7K-SS 10 6450710 CMB13372D Caliper Mounting Bracket E-Coat 6450660 2RCM13379-K 11 6450811 DBC250SMPAD 2RCM13379E-K DBC250CERMPAD Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 6450661 6450810 6450662 2RCM13379SCAD-K 6450695 ROTOR13378 1/2" 865 13" Rotor Standard Automotive Finish 6450663 2RCM13379SCADSS-K 6450696 ROTOR13378E 2RCM13379SS-K 6450697 6450698 ROTOR13378SS 6450774 ROTOR13389 1/2" 865 13" Rotor E-Coat 1/2" 865 13" Rotor Silver Cadmium Plated 1/2" 865 13" Rotor Stainless Steel 9/16" 865 13" Rotor Standard Automotive Finish 9/16" 865 13" Rotor E-Coat 9/16" 865 13" Rotor Silver Cadmium Plated 9/16" 865 13" Rotor Stainless Steel 6450664 ROTOR13378SCAD 7 12 6450775 ROTOR13378E 6450776 ROTOR13378SCAD 6450777 ROTOR13378SS 6450661 WWW.TEXTRAIL.COM Kits contain parts for one complete axle Item 6450657 6450658 A-54 Description 1/2" Axle Kit, STD Rotor, E-Coat Caliper 1/2" Axle Kit, E-Coat 1/2" Axle Kit, MAXX Rotor and Caliper 1/2" Axle Kit, MAXX Rotor, SS Caliper 1/2" Axle Kit, SS 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, SS 6450659 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12-1/4” 7.2K Electric Brake Assemblies & Components 12 1/4" x 2 1/2" 7.2K Electric Brake* Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Qty/ Description Brk 6400057 23-428 1 LH Electric Assembly 6400058 23-429 1 RH Electric Assembly 6450160-01 71-441 1 Magnet Kit 42-136 1 7.2K Oval Magnet for Dexter 12 1/4” Electric Brakes 6450232 46-117 1 Magnet Spring 6450194 27-50 1 Magnet Retaining Clip 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 5-142 1 1/2" Plain Type B Anchor Post Washer 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 6450137 47-124-1 1 LH Actuating Arm 6450138 47-125-1 1 RH Actuating Arm 6450102 27-39 3 Magnet Wire Retaining Clip 6450226 46-18 1 Adjuster Screw Spring 6450009 48-17 1 Adjuster Assembly 6450289 71-497 1 LH Shoe & Lining Kit 6450290 71-496 1 RH Shoe & Lining Kit 6450237 46-119 1 Return Spring 6450097 46-136 2 Centering Spring 7-251 4 1/2"-20 x 1.5" Brake Mounting Bolt Grade 5 6450300 36-118-20 1 Dust Shield 6450001 46-16 1 Wire Grommet 0.437 Dia. 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 6450038 46-7 2 Adjuster Plug * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. Part # Ref # WWW.TEXTRAIL.COM A-55 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 7,200 lb Integral Disc Brake Assemblies & Components 6450691 6450683 Rotary Style 13” Slip -On 8 on 65” Bolt Pattern Fits all 4-Bolt Brake Flange with #42 Spindle For 16” & Larger Wheels 6450707 REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel 6450818 DBC250PISTONSCAD 7 6450819 DBC250PISTONSS 8 6450820 DBC250SEAL Item Part # 1 6450558 2 6450556 3 6450560 4 6450552 5 6450553 6451000 6451001 6 6450705 6450706 Ref # 6450783 ROTORHUB13389 6450784 ROTORHUB13389E 6450785 ROTORHUB13389SCAD 6450788 ROTORHUB133810 6450789 ROTORHUB133810E 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 865 13" Rotor/Hub E-Coat 6450790 ROTORHUB133810SCAD 5/8" 865 13" Rotor/Hub Silver Cadmium Plated 9 6450821 DBC250BOOT 10 6450710 CMB13372D 11 6450811 DBC250SMPAD 6450810 DBC250CERMPAD 12 Item 2-1/2" Silver Cadmium Plated Piston Part # Not Included in Kits Below Ref # Description 7-271 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 7/16" Lock Washer 6-17 7/16"-20 Nut Kits contain parts for one complete axle 24 Mounting Hardware Part # Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 7700073 Double Lip Seal 3.376" OD x 2.250" ID 10-63 7700088 Unitized Seal 3.376" OD x 2.250" ID 25580 7800026 Inner Bearing Cone 25520 7800054 Inner Bearing Cup 02475 7800028 Outer Bearing Cup 02420 7800057 Outer Bearing Cone 5-57 8750034 Spindle D-Washer 6-1 8750005 Spindle Nut 19-2 8750003 Cotter Pin 21-39 7700186 Grease Cap 2.72" 25 7700018 21-43-1 Grease Cap EZ Lube 2.72" 7700019 21-43-2 26 7700053 85-1 30 7700029-01 27 7700055 10-45 28 7700029 21-35 29 7700052 46-32 7700051 46-52 31 6450835 LB25 Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud 7700123 7-223 9/16"-18 x 2.01" Pressed Wheel Stud 6450741 LB3165 5/8"-18 x 3.165" Pressed Wheel Stud Item 16 17 18 19 20 21 22 23 32 7700145 7-224 5/8"-18 x 2.50" Pressed Wheel Stud 7700036 6-53 9/16"-18 60 Deg Cone Nut Zinc Plated 7700048 6-109 7700034 6-58 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut Rotor Only Kits Includes Items 1 thru 12 Ref # 15 6450181 Item Part # Description 9/16" Axle Kit, STD Rotor, E-Coat 2HRCM133729-K For Salt Water applications it is recommended the use of Stainless Steel Hardware 6450683 Caliper 2HRCM133729E-K 6450684 9/16" Axle Kit, E-Coat Caliper 5/8" Axle Kit, STD Rotor, E-Coat 2HRCM1337210-K 6450691 Caliper Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. 13 6450307 14 7030116 WWW.TEXTRAIL.COM A-56 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 7,200 lb Slip-On Disc Brake Assemblies & Components Rotary Style 8 on 65” Bolt 13” Slip -On Pattern Fits all 4-Bolt Brake Flange with #42 Spindle For 16” & Larger Wheels REPLACEMENT PARTS Item Part # Ref # 1 6450558 DBCMHGB 2 6450556 DBCMHBS 3 6450560 DBCMHBSB 4 6450552 DBCFIFMP90 5 Mounting Hardware Description Not Included in Kits Below Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8" 6450553 DBCNPTADPBBS 6451000 DBCNPTBBS 6451001 DBCNPTADP 6450705 DBC250E 6450706 DBC250SCAD 6450707 DBC250SS 6450818 DBC250PISTONSCAD 6450819 DBC250PISTONSS Item Part # Ref # Description 13 6450307 7-271 14 7030116 5-8 15 6450181 6-17 7/16"-20 x 1-3/16" Grade 5 Bolt 7/16" Lock Washer 7/16"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware Caliper comes w/ items 1-9 6 7 8 6450820 DBC250SEAL 9 6450821 DBC250BOOT 10 6450710 CMB13372D 11 12 Caliper E-Coat Caliper Silver Cadmium Plated 6450811 DBC250SMPAD 6450810 DBC250CERMPAD 6450774 ROTOR13389 6450775 ROTOR13389E 6450776 ROTOR13389SCAD 6450777 ROTOR13389SS 6450778 ROTOR133810 6450779 ROTOR133810E 6450780 ROTOR133810SCAD 6450781 ROTOR133810SS Item Part # Caliper Stainless Steel 6450665 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 865 13" Rotor Standard Automotive Finish 9/16" 865 13" Rotor E-Coat 9/16" 865 13" Rotor Silver Cadmium Plated 9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel 6450666 6450665 WWW.TEXTRAIL.COM Kits contain parts for one complete axle 6450671 6450672 Rotor Only Kits Includes Items 1 thru 12 Ref # Description 9/16" Axle Kit, STD Rotor, E-Coat 2RCM133729-K Caliper 2RCM133729E-K 9/16" Axle Kit, E-Coat 2RCM1337210-K 5/8" Axle Kit, STD Rotor, E-Coat Caliper 2RCM1337210E-K 5/8" Axle Kit, E-Coat 6450671 A-57 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12 1/4" x 3 3/8" 8K Electric Manual Adjust Brake* Item Part # Ref # Qty/Brk Description 23-432 1 LH Electric Assembly 23-433 1 RH Electric Assembly 1 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25” Electric Brakes 2 6450194 27-50 1 Magnet Retaining Clip 3 6450232 46-117 1 Magnet Spring 4 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 5 5-142 1 Washer Plain 1/2" Type B 6 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 7 47-123-18 1 LH Actuating Arm Assembly 47-123-17 1 RH Actuating Arm Assembly 8 6450102 27-39 3 Magnet Wire Retaining Clip 9 6450237 46-119 1 Return Spring 10 6450226 46-18 1 Adjuster Spring 11 6450101 46-133 1 Adjuster Clip - Barrel End 12 6450009 46-17 1 Adjuster Assembly 13 6450100 46-132 1 Adjuster Clip - Thread End 14 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 15 6450097 46-136 2 Centering Spring 16 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 17 6450113 36-115-20 1 Dust Shield 18 6450038 46-7 2 Adjuster Plug 19 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 20 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 21 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. WWW.TEXTRAIL.COM A-58 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12-1/4” 8K Electric Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12 1/4” x 3 3/8” 8K Forward Self-Adjusting Electric Brake* 12 1/4" x 3 3/8" 8K Forward Self-Adjusting Electric Brake* Item Part # Ref # Qty/Brk Description 6400039 23-434 1 LH FSA Electric Assembly 6400040 23-435 1 RH FSA Electric Assembly 1 6450275 46-137 1 Adjuster Spring 2 6450146 71-464 1 LH Adjuster Lever 6450150 71-463 1 RH Adjuster Lever 3 6450088 71-462 1 Adjuster Cable 10" 4 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25” Electric Brakes 5 6450232 46-117 1 Magnet Spring 6 6450194 27-50 1 Magnet Retaining Clip 7 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 8 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 9 6450102 27-39 3 Magnet Wire Retaining Clip 10 6450271 47-123-38 1 LH Actuating Arm 6450270 47-123-37 1 RH Actuating Arm 11 6450237 46-119 1 Return Spring 12 6450101 46-133 1 Adjuster Clip - Barrel End 13 6450011 48-19 1 LH Adjuster Assembly (Silver) 6450010 48-20 1 RH Adjuster Assembly (Gold) 14 6450100 46-132 1 Adjuster Clip - Thread End 15 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 16 6450097 46-136 2 Centering Spring 17 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 18 6450113 36-115-20 1 Dust Shield 19 6450038 46-7 2 Adjuster Plug 20 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 21 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 22 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. WWW.TEXTRAIL.COM A-59 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12 1/4" x 3 3/8" 8K Hydraulic Duo-Servo Manual Adjust Brake Item Part # 1 2 3 4 5 6450264 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 6450260 6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6050055 6450019 6450027 6450259 6450203 6450113 6450038 Ref # 23-388 23-387 69-53 5-142 34-62 46-87 71-165 71-166 6-86 5-107 46-18 46-132 48-17 46-133 97-2 24-204 7-97 97-4 36-64-3 71-80 54-33 7-113 36-115-20 5-58 6-129 46-7 WWW.TEXTRAIL.COM Qty/Brk Description 1 LH Duo-Servo Hydraulic Assembly 1 RH Duo-Servo Hydraulic Assembly 1 Retainer Ring 1 Washer Plain 1/2" Type B 1 Piston Stop 1 Spring Retractor 1 LH Shoe & Lining Kit 1 RH Shoe & Lining Kit 2 Shoe Hold Locknut 3/8”-16 2 Shoe Hold Down Washer 1 Spring Adjuster 1 Adjuster Clip - Thread End 1 Adjuster Assembly 1 Adjuster Clip - Barrel End 1 ABS Sensor Retainer Clip 1 ABS Sensor Mounting Block 4 1/2"-20 x 1.75" Hex Head Break Mounting Bolt 1 ABS Sensor - Straight 1 LH Spider Assembly (Includes Items 17-19) 1 Wheel Cylinder Kit (1.00” Bore) containing: 1 Cylinder Push Rod 2 Shoe Hold Down Screw 1 Dust Shield 4 1/2" Lock washer 4 1/2"-20 Brake Mounting Nut 2 Adjuster Slot Plug A-60 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12-1/4” 8K Hydraulic Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12-1/4” 8K Hydraulic with Park Brake Assemblies & Components 12 1/4" x 3 3/8" 8K Hydraulic Uni-Servo Manual Adjust Brake with Park Feature Item Part # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6450019 6450203 6450027 6450259 6450038 Ref # 23-252 23-253 7-96 5-143 5-65 46-91 47-89 47-90 39-55 39-56 33-83 46-87 71-165 71-166 6-86 5-107 46-18 46-132 48-17 46-133 7-97 7-113 36-64-8 36-64-9 69-40 71-80 54-33 36-115-24 5-58 6-129 46-7 71-512 WWW.TEXTRAIL.COM Qty/Brk 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 4 2 1 1 1 1 1 1 4 4 2 1 Description LH Uni-Servo Hydraulic Assembly RH Uni-Servo Hydraulic Assembly Hold Down Lever Bolt Star Washer Hold Down Lever Washer Hold Down Lever Spring LH Parking Lever RH Parking Lever LH Parking Cam RH Parking Cam Spacer Spring Retractor LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8”-16 Shoe Hold Down Washer Spring Adjuster Adjuster Clip - Thread End Adjuster Assembly Adjuster Clip - Barrel End 1/2"-20 x 1.75" Hex Head Break Mounting Bolt Shoe Hold Down Screw LH Spider Assembly (Includes Items 19-21) RH Spider Assembly (Includes Items 19-21) Retainer Snap Ring Wheel Cylinder Kit (1.00” Bore) containing: Cylinder Push Rod Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug Parking Brake Cable A-61 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 12 1/4" x 3 3/8" 8K Hydraulic Forward Self-Adjusting Brake Item 1 2 3 4 5 6 7 8 9 10 11 12 Part # 6400041 6460042 6450013 6450014 6450146 6450150 6450088 6450264 6450280 6450291 6450260 6450219 6450100 6450011 6450010 6450101 6450081 6450080 13 14 15 16 6450247 6450019 17 18 19 20 21 22 23 6450027 6450259 6450203 6450113 9000251 9000137 6450038 Ref # 23-418 23-419 23-402 23-403 46-135 46-134 71-464 71-463 71-462 69-53 71-456 46-131-1 34-62 46-87 46-132 48-19 48-20 46-133 71-165 71-166 6-86 5-107 7-97 36-64-3 36-64-6 36-64-7 71-80 54-33 7-113 36-115-20 5-58 6-129 46-7 WWW.TEXTRAIL.COM Qty/Brk 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 1 1 1 1 1/2 2 1 4 4 2 Description LH Uni-Servo FSA Hydraulic Assembly RH Uni-Servo FSA Hydraulic Assembly LH Duo-Servo FSA Hydraulic Assembly RH Duo-Servo FSA Hydraulic Assembly LH Adjuster Spring RH Adjuster Spring LH Adjuster Lever RH Adjuster Lever Adjuster Cable 10" Long Retainer Ring Cable Attachment Bracket Spring Extension Piston Stop Spring Retractor Adjuster Clip - Thread End LH Adjuster Assembly RH Adjuster Assembly Adjuster Clip - Barrel End LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8”-16 Shoe Hold Down Washer 1/2"-20 x 1.75" Hex Head Break Mounting Bolt Spider Assembly DS (Includes Items LH Spider Assembly US (Includes Items RH Spider Assembly US (Includes Items Wheel Cylinder Kit (1.00” Bore) Cylinder Push Rod US (1) DS (2) Shoe Hold Down Screw Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug A-62 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES 12-1/4” 8K Hydraulic FSA Brake Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 8,000 lb Integral Disc Brake Assemblies & Components Rotary Style 13” Integral 8 on 6.5” Bolt Pattern 9/16” & 5/8” Bolts Item Part # Ref # 1 6450558 DBCMHGB 2 6450556 DBCMHBS 3 6450560 DBCMHBSB 4 6450552 DBCFIFMP90 5 6450553 DBCNPTADPBBS 6451000 DBCNPTBBS 6451001 DBCNPTADP Fits all 4-Bolt Brake Flange with #42 Spindle REPLACEMENT PARTS Description Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8" 6450705 DBC250E 7 6450818 DBC250PISTONSCAD 6450819 DBC250PISTONSS 8 6450820 DBC250SEAL 9 6450821 DBC250BOOT 10 6450806 6450807 10 12 Item 13 14 15 Dexter Axle Caliper Mounting Brackets CMB1338DI Caliper Mounting Bracket E-Coat CMB1338DISCAD Caliper Mounting Bracket Silver Cadmium Plated 6450804 6450811 DBC250SMPAD 6450810 DBC250CERMPAD 6450774 ROTORHUB13389 6450798 6450805 11 Caliper E-Coat 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel 6450775 ROTORHUB13389E 6450776 ROTORHUB13389SCAD 6450778 ROTORHUB133810 6450779 ROTORHUB133810E 6450780 ROTORHUB133810SCAD Kits contain parts for one complete axle Mounting Hardware Description Item Part # Ref # 16 7700073 10-36 7700088 10-63 17 7800026 25580 18 7800054 25520 19 7800028 02475 20 7800057 02420 21 8750034 5-57 22 8750005 6-1 23 8750003 19-2 24 7700186 21-39 25 7700018 21-43-1 7700019 21-43-2 26 7700053 85-1 30 7700029-01 27 7700055 10-45 28 7700029 21-35 29 7700052 46-32 7700051 46-52 Item 16-17 & 20-27 Not Included in Kits Below Caliper comes w/ items 1-9 6 Kits contain parts for one complete axle 31 Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 856 13" Rotor/Hub E-Coat 9/16" 856 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 856 13" Rotor/Hub E-Coat 5/8" 856 13" Rotor/Hub Silver Cadmium Plated 32 6450835 LB25 7700123 7-223 6450741 LB3165 7700145 7-224 7700036 6-53 7700048 6-109 7700034 6-58 Double Lip Seal 3.376" OD x 2.250" ID Unitized Seal 3.376" OD x 2.250" ID Inner Bearing Cone Inner Bearing Cup Outer Bearing Cup Outer Bearing Cone Spindle D-Washer Spindle Nut Cotter Pin Grease Cap 2.72" Grease Cap EZ Lube 2.72" Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud 9/16"-18 x 2.01" Pressed Wheel Stud 5/8"-18 x 3.165" Pressed Wheel Stud 5/8"-18 x 2.50" Pressed Wheel Stud 9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut Dexter Axle Rotor Only Kits Includes Items 1 thru 12 Item Part # Ref # Not Included in Kits Below 6450758 2HRCM1338D9-K Description Description 1/2"-20 x 1-3/4" Grade 5 Bolt 12LWP 9000251 1/2" Lock Washer 9000137 6-46 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware Part # Ref # 6450759 2HRCM1338D9E-K 6450019 7-97 6450760 2HRCM1338D9SCAD-K 6450761 2HRCM1338D9SCADSS-K Kodiak’s offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. 6450671 6450765 WWW.TEXTRAIL.COM 6450766 A-63 2HRCM1338D10-K 6450771 2HRCM1338D10E-K 6450765 2HRCM1338D10SCAD-K 6450766 2HRCM1338D10SCADSS-K Other Axle Rotor Only Kits Includes Items 1 thru 12 Item 6450663 6450763 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper Part # Ref # 6450758-02 2HRCM1338A9-K 6450759-02 2HRCM1338A9E-K 6450760-02 2HRCM1338A9SCAD-K 6450761-02 2HRCM1338A9SCADSS-K 6450763-02 2HRCM1338A10-K 6450771-02 2HRCM1338A10E-K 6450765-02 2HRCM1338A10SCAD-K 6450766-02 2HRCM1338A10SCADSS-K Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 8,000 lb Slip-On Disc Brake Assemblies & Components Rotary Style 13" Slip -On Item Part # 1 6450558 2 6450556 3 6450560 4 6450552 5 6450553 6451000 6451001 8 on 6.5" Bolt Pattern 9/16" & 5/8" Bolts Fits all 4-Bolt Brake Flange with #42 Spindle REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Mounting Hardware Ref # Not Included in Kits Below Item Part # Ref # 7 6450705 DBC250E 6450706 DBC250SCAD 6450707 DBC250SS 6450818 DBC250PISTONSCAD 6450819 DBC250PISTONSS 8 6450820 DBC250SEAL 9 6450821 DBC250BOOT 10 6450799 6450019 7-97 Dexter Axle Rotor Only Kits Includes Items 1 thru 12 Item Dexter Axle Caliper Mounting Brackets CMB1338D Caliper Mounting Bracket E-Coat Part # Ref # 6450743 2RCM1338D9-K 6450744 2RCM1338D9E-K 6450745 2RCM1338D9SCAD-K 6450747 2RCM1338D9SCADSS-K 6450748 2RCM1338D9SS-K 6450750 2RCM1338D10-K 6450751 2RCM1338D10E-K 6450752 2RCM1338D10SCAD-K 6450800 Caliper Mounting Bracket Silver Cadmium Plated 6450753 2RCM1338D10SCADSS-K 6450801 6450755 2RCM1338D10SS-K 6450775 Caliper Mounting Bracket Stainless Steel Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel DBC250SMPAD Brake Pads (Semi-Metallic) DBC250CERMPAD Brake Pads (Ceramic) ROTOR13389 9/16" 865 13" Rotor Standard Automotive Finish ROTOR13389E 9/16" 865 13" Rotor E-Coat 6450776 ROTOR13389SCAD 6450777 ROTOR13389SS 6450778 ROTOR133810 6450805 6450804 6450811 6450810 12 Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot CMB1338DSCAD 6450798 11 Description 1/2"-20 x 1-3/4" Grade 5 Bolt 12LWP 14 9000251 1/2" Lock Washer 6-46 15 9000137 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware 13 Caliper comes w/ items 1-9 6 Kits contain parts for one complete axle For 16" & Larger Wheels 6450774 CMB1338DSS 6450779 ROTOR133810E 6450780 ROTOR133810SCAD 6450781 ROTOR133810SS Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, Stainless Steel Other Axle Rotor Only Kits Includes Items 1 thru 12 Item Part # Ref # 6450743-02 2RCM1338A9-K Description 2RCM1338A9SS-K 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel 9/16" 865 13" Rotor Silver Cadmium Plated 6450750-02 2RCM1338A10-K 5/8" Axle Kit, STD Rotor, E-Coat Caliper 9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel 6450751-02 2RCM1338A10E-K 5/8" Axle Kit, E-Coat 6450752-02 2RCM1338A10SCAD-K 5/8" Axle Kit, SCAD 6450753-02 2RCM1338A10SCADSS-K 6450755-02 2RCM1338A10SS-K 6450744-02 2RCM1338A9E-K 6450745-02 2RCM1338A9SCAD-K 6450747-02 2RCM1338A9SCADSS-K 6450748-02 5/8" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, Stainless Steel Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. 6450750 WWW.TEXTRAIL.COM 6450751 6450752 A-64 6450755 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S AIRFLEXTM for 7K - 8K Axles Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Part # 9000144 9100113 9100098 9100114 9100115 Ref # 3-272 3-273 34-279 6-38 12-60-2 7-259 5-58 11-89-1 5-143 6-122-1 6-116 3-261 7-177 5-111 6-126 71-632-1 71-632-2 71-632-3 71-632-4 Qty/Brk 1 1 2 16 4 4 6 8 2 2 2 2 6 6 6 WWW.TEXTRAIL.COM Description LH Suspension Assembly (Includes RH Suspension Assembly (Includes Air Spring 5/8"-11 Hex Locknut GRB Zinc Tie Plate Dichromate Plated 1/2"-13 x 1" Long Hex Bolt UNC 1/2" Lock washer 0.125" 5/8"-11 x 7.25" Long U-Bolt for 3.50" Axle Tube 3/4" Lock washer 3/4"-16 Hex Jam Nut RH GR2 1/2"-13 Hex Nut GR2 Side Mount Mounting Bracket 5/8"-18 x 1.5" Long Mounting Hex Bolt GR5 5/8" Plain Washer 0.179" 5/8"-18 Hex Lock Nut Air Control Kit - Tandem Plumbing with Ride Height Control Valve Air Control Kit - Air Generation (including compressor & tank) Air Control Kit - Manual Dump Valve Kit Air Control Kit - Tri-Axle Conversion Plumbing Kit A-65 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 9,000 lb. -10,000 lb General Duty Axle Springs 9,000 lb. -10,000 lb General Duty Axle Springs 9,000 lb. Description Slipper 2" x 30" 6 Leaf Slipper 2" x 30" w/ 5/8" Rubber / Steel Bushing 6 Leaf Slipper 2" x 29-1/2" Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf 10,000 lb. General Duty Capacity Part # Ref# Part # Ref# 4,500 lb. 9150001 72-10 n/a n/a 4,500 lb. 9150059 72-10-2 n/a n/a 5,300 lb. 9150026 E8536 n/a n/a 5,000 lb. n/a n/a 9150046 72-77 5,000 lb. n/a n/a 9150033 72-80 5,000 lb. n/a n/a 9150027 72-21 5,000 lb. n/a n/a 9150029 93161A 5,000 lb. n/a n/a 9150028 72-43-1 6,000 lb. n/a n/a 9150030 72-44-1 7,500 lb. n/a n/a 9150032 72-45-1 Hanger Kits 9,000 lb. 10,000 lb. General Duty 2" Springs Description Part # Ref# 2-1/2" Springs Part # Ref# n/a n/a 9100065 HAP-157-00 Double Eye Single Axle 7/8" Eye* n/a n/a 9100070 HAP-157-01 Double Eye Single Axle 7/8" Eye 38" Spacing** n/a n/a 9100069 HAP-257-02 Double Eye Single Axle 7/8" Eye 42-1/4" Spacing** n/a n/a 9100066 HAP-257-03 Double Eye Single Axle 7/8" Eye 48-1/2" Spacing** 9100011 HAP-105-00 9100072 HAP-158-00 Slipper Single Axle* 9100008 HAP-205-01 9100089 HAP-258-01 Slipper Tandem Axle 38" Spacing** 9100009 HAP-205-02 9100090 HAP-258-02 Slipper Tandem Axle 42-1/4" Spacing** 9100010 HAP-205-03 9100091 HAP-258-03 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit. U-Bolt Kits Part # Description 5/8" Diameter 5" Round 8-15/16" Long Type n/a n/a n/a n/a 9100012 9100006 9100055 9100005 n/a n/a n/a n/a HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03 10,000 lb. General Duty Part # Part # 865 865 6151490 6151505 Electric 12-1/4" x 3-3/8" Electric Straight w/ Oil 865 865 6151491 6151506 Hydraulic 12-1/4" x 3-3/8" Duo-Servo Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil 865 865 6151492 6151507 6151493 6151508 A-66 Ref# APUBR5 Idler Idler Straight w/ Oil WWW.TEXTRAIL.COM Part # Ref# 9100096 9,000 lb. -10,000 lb General Duty Axles 9,000 lb. 3" Rubber Bushed Springs 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 10,000 lb. - 15,000 lb Heavy Duty Axle Springs 10,000 lb. - 15,000 lb Heavy Duty Axle Springs 10,000 lb. 12,000 lb. Capacity Part # Ref# Part # Ref# Description Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf 15,000 lb. Part # Ref# 5,000 lb. 9150046 72-77 n/a n/a n/a n/a 5,000 lb. 9150033 72-80 n/a n/a n/a n/a 5,000 lb. 9150029 93161A n/a n/a n/a n/a 5,000 lb. 9150027 72-21 n/a n/a n/a n/a 5,000 lb. 9150028 72-43-1 9150028 72-43-1 9150028 72-43-1 6,000 lb. 9150030 72-44-1 9150030 72-44-1 9150030 72-44-1 7,500 lb. 9150032 72-45-1 9150032 72-45-1 9150032 72-45-1 Hanger Kits Part # Description Ref# 9100012 Slipper Single Axle* 9100006 Slipper Tandem Axle 38" Spacing** 9100055 Slipper Tandem Axle 42-1/4" Spacing** 9100005 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit. HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03 U-Bolt Kits Part # Description Ref# 5/8" Diameter 5" Round 8-15/16" Long 6151528 6151565 10,000 lb. - 15,000 lb Heavy Duty Axles Type Idler Idler Straight w/ Oil Electric Electric Straight w/ Oil Hydraulic Duo-Servo Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Hydraulic Disc Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Air Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil 10,000 lb. 12,000 lb. Low-Profile 12,000 lb. High-Profile 15,000 lb. Part # Part # Part # Part # 865 865 865 8-275mm 6151520 n/a n/a n/a 8-275mm 865 865 865 6151521 6151541 6151540 6151565 865 865 865 8-275mm 6151522 6151546 6151544 6151566 6151523 n/a 6151545 6151567 865 865 865 8-275mm 6151524 n/a 6151542 n/a 6151525 n/a 6151543 n/a 865 865 865 8-275mm 6151526 6151549 6151547 6151568 6151527 6151550 6151548 6151569 Air with Park Hydraulic Straight w/ Oil 865 865 865 8-275mm 6151528 6151553 6151551 6151570 ABS Hydraulic Straight w/ Oil 6151529 6151556 6151552 6151571 WWW.TEXTRAIL.COM A-67 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 10,000 lb Torflex® Axles & Axle Components TF#13G & D - 10,000 lb. Torflex® Hanger Kits Description TF13G & D Side Mount Hanger Kit - Weld On Part # Ref# 9100001 A/P-169 *** 13G & D Torflex axles are standard high profile, top mounted and oil bath. TF#13G - 10,000 lb. General Duty Torflex® Axles*** Type Part # Electric 12-1/4" x 3-3/8" 865 Electric 6152184 Hydraulic Duo-Servo 6152185 ABS Hydraulic Duo-Servo 6152186 TF#13D - 10,000 lb. Heavy Duty Torflex® Axles*** Type Part # Electric 12-1/4" x 4" 865 Electric 6152187 Hydraulic Duo-Servo 6152188 ABS Hydraulic Duo-Servo 6152189 TF#13G - 10,000 lb. General Duty Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum Hub Face (Single Wheel) 22.75" 34.25” Track Width (Dual Wheel) 23.50" 34.25” TF#13D - 10,000 lb. Heavy Duty Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum Maximum Hub Face (Single Wheel) 24.50" 34.25” Track Width (Dual Wheel) 25.25" 34.25” WWW.TEXTRAIL.COM A-68 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 9K -10K General Duty Replacement Hub & Hub and Drum Components Item Part # OIL LUBE PARTS Description Ref # Unitized Oil Seal 3.88"OD x 2.875"ID 2 7800024 387A Inner Bearing Cup 3 7800052 382A Inner Race Cone 4 7800054 25520 Outer Bearing Cup 5 7800026 25580 Outer Bearing Cone 6 8750007 6-96 Spindle Nut (2) 7 8750037 5-70 Spindle Washer 8 8750038 5-71 Tang Washer 1.5"ID x 0.060" 7700030-01 TTOC373 Oil Cap Kit (Includes Items 9-11) 7700215-02 TTOC374 Oil Cap Kit (Includes Items 9-1,10-1 &11)* 9 7700030 21-36 Oil Cap - TWO PIECE Hub 9-1 7700215 21-88 Oil Cap - ONE PIECE Hub 10 7700054 10-50 O-Ring - TWO PIECE Hub 10-1 7700216 10-163 O-Ring - ONE PIECE Hub 11 7700052 46-32 Oil Cap Plug 12 7700011 7-245 1/2"-13 x 1.50" Drum Mounting Bolt 13 6450020 7-116 7/16"-20 x 1.75" Brake Mounting Bolt 14 6450181 6-17 7/16"-20 Brake Mounting Hex Nut 7030116 5-8 7/16" Lock washer * Use 7700215-01 Oil Cap Kit for DX 1-Piece Hub & Drum Assembly 1 7700081 10-51 Ref # HUBS*** Description Bolt Circle 8-288-3 Cupped & Studded 9K-10K GD 8 on 6.50 7650007 9-44-1 7650108 9-44-3 Machined 9-10K GD NON-ABS ABS 9-10K GD ABS Assy 8 on 6.50 8 on 6.50 5/8"-18 Stud Oil 9-10K GD 8 on 6.50 5/8"-18 Stud Oil 9-10K GD 8 on 6.50 5/8"-18 Stud Oil 9-10K GD 8 on 6.50 Item Part # Plain Hubs 19 7650088 Drums 20 Two-Piece Hubs & Drums 7650057 8-288-5 One-Piece Hub & Drum 7650215 8-415-2 One-Piece ABS Hub & Drum 7650216 Item Hubs 8-415-4 HUBS COMPLETE*** Includes bearings, seal, cap & lug nuts. Part # Ref # Description 7650088-02 8-288-91 5/8"-18 Stud Oil 9-10K GD Bolt Circle 8 on 6.50 Two-Piece Hub & Drum 7650057-02 8-288-90 5/8”-18 Stud Oil 9-10K GD 8 on 6.50 One-Piece Hubs & Drums Item Part # STUDS & WHEEL NUTS Ref # Description 15 7700107 7-115 16 7700034 6-58 17* 7700048 6-109 18* 7700033 33-52-1 5/8"-18 x 3.16" Pressed Wheel Stud 5/8"-18 Flange Nut 5/8"-18 90 Deg Cone Nut Wheel Retaining / Clamp Ring Item 21 * Must use the 90 Degree Cone Nut with the Wheel Retaining / Clamp Ring. Alternate fastener is just the flange nut (Item 17). Item Part # Ref # Description 23 97-4 24 24-204 25 97-2 Straight Sensor Sensor Block Sensor Clip WWW.TEXTRAIL.COM 5/8”-18 Stud Oil 9-10K GD 7650215-02 22 Part # 26-1 ns A-69 12 1/4 x 3 3/8 BRAKES Ref # Description 6400014 23-410 6400015 23-411 LH Electric 9-10K GD Assy 7-Bolt FSA RH Electric 9-10K GD Assy 7-Bolt FSA LH Hydraulic Duo-Servo 9-10K GD Assy RH Hydraulic Duo-Servo 9-10K GD Assy Ref # Description 6400044 23-450 6400045 23-451 ABS COMPONENTS Item Part # 26 8 on 6.50 Tone Ring - TWO PIECE Hub 24-205-1 Tone Ring - ONE PIECE Hub 7-248 Tone Ring Screws 24-203 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 10K Heavy Duty -15K Replacement Hub & Hub and Drum Components 10K Item Description 1 Unitized Oil Seal 4.50"OD x 3.125"ID 2 Inner Bearing Cone 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Inner Bearing Cone Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Outer Bearing Cone Outer Bearing Cup Oil Cap O-Ring Oil Cap Oil Cap Plug Wheel Nut Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8 & 15-16) Inner Bearing Cup Inner Bearing Cup Outer Bearing Cup Outer Bearing Cup Spindle Washer 1.75"ID Spindle Nut 1.75"-12 Tang Washer 1.75"ID x .060" Wheel Clamp Ring Drum Mounting Bolt Brake Drum Brake Drum Brake Drum - ABS Brake Drum - ABS Rotor Mounting Bolt Rotor Mounting Nut Brake Drum Rotor Brake Drum Rotor - ABS Wheel Mounting Stud Wheel Mounting Stud Flange Nut (Swivel) WWW.TEXTRAIL.COM Ref # 10-56 395S 3984 8-214-5 8-214-6 8-216-8 8-214-8 8-214-10 8-401-5 387A 28682 10-50 21-36 46-32 6-109 8-214-92 8-216-97 8-214-96 8-214-95 394A 3920 382A 28622 5-60 6-84 5-59 33-52-1 7-244 9-27-1 9-28-1 9-27-3 9-28-5 25-14 6-46 70-6-1 70-6-2 7-115 7-194 6-118 10K Disc 12K Low-Profile 12K Hi-Profile 12K Disc 15K 8 on 6.50 8 on 6.50 8 on 6.50 8 on 6.50 8 on 6.50 8 on 275 mm 7700077 7800040 7700077 7800040 7700077 7700077 7700077 7700077 7800004 7800004 7800004 7800004 7650064 7650132 7650068 7650066 7650067 7650107 7800024 7800024 7700054 7700030 7700052 7700048 7650064-02 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7650068-02 7650066-02 7650066-03 7800005 7800005 7800052 7800052 8750042 8750008 8750041 7700033 7700010 7650004 8750042 8750008 8750041 7700033 7800042 7800042 7800042 7800042 7800053 8750042 8750008 8750041 7700033 7700010 7800053 8750042 8750008 8750041 7700033 7700010 7800053 8750042 8750008 8750041 7700033 7800053 8750042 8750008 8750041 7650005 7650005 7650028 7650028 7700010 7650005 7650026 7700107 6450242 9000137 6450199 6450299 7700107 7700107 7700107 7650028 6450242 9000137 6450199 6450299 7700107 7700171 7700172 A-70 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 9,000 lb -10,000 lb General Duty Disc Brake Assemblies & Components Rotary Style 8 on 6.5" Bolt 11" Leaf Spring & Pattern 5/8" 13" Torsion Bolts For 16" Dual or 17.5" Single Wheels Fits Dexter 7-Bolt Brake Flange REPLACEMENT PARTS Description Item Part # Ref # 1 6450903 DBC338MHGB 2 6450899 DBC338MHBS 6450901 DBC338MHBSB 3 6450552 DBCFIFMP90 4 6450553 DBCNPTADPBBS 6451000 DBCNPTBBS 6451001 DBCNPTADP 12 6 6450873 DBC338E 6450874 DBC338SCAD 6450875 DBC338SS 6450895 DBC338PISTON 6450896 DBC338PISTONSS 7 6450898 DBC338SEAL 8 6450897 DBC338BOOT 6450866 ROTOR11910D8 6450870 6450868 6450871 ROTOR13910D8 ROTOR11910D8SCAD 10 6450878 CMB11910DSCAD 11 6450892 6450893 ROTOR10DSPACERSCAD ROTOR13910D8SCAD ROTOR10DSPACER 6450886 DBC338CERMPAD 6450848 2RCMS1110D-K Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper Ref # 6450856 2RCMS1310D-K Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8" 6450847 2RCMS1110DSCAD-K Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 3-3/8" Silver Cadmium Plated Finish 3-3/8" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Brake Pads (Semi-Metallic) Brake Pads (Ceramic) Bolt Dexter Axle Rotor Only Kits Bleed Port / Screw Assy (Contains Next 2 Items) 6450857 2RCMS1310DSCAD-K 6450849 2RCMS1110DSCADSS-K 6450858 2RCMS1310DSCADSS-K 5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper #99 Spindle Axle Rotor Only Kits Item Dexter Axle Rotor and Caliper Mounting Bracket 9 DBC338SMPAD 13 Includes Items 1 thru 12 Item Part # Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Sleeve Adapter Port 90 deg 1/8" NPT to 3/16" FIF Caliper comes w/ items 1-8 5 6450716 Kits contain parts for one complete axle 11" Leaf Spring Rotor Standard Automotive Finish 13" Torsion Rotor Standard Automotive Finish 11" Leaf Spring Rotor Silver Cadmium Plated 13" Torsion Rotor Silver Cadmium Plated Caliper Mounting Bracket Silver Cadmium Plated Rotor Spacer Standard Automotive Finish Rotor Spacer Silver Cadmium Plated Part # Ref # 6450851 2RCMHS1110A-K 6450859 2RCMHS1310A-K 6450850 2RCMHS1110ASCAD-K 6450860 2RCMHS1310ASCAD-K 6450852 2RCMHS1110ASCADSS-K 6450861 2RCMHS1310ASCADSS-K Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper 5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper #99 Spindle Axle Rotor and Caliper Mounting Bracket 11" Leaf Spring Rotor Standard Automotive Finish 13" Torsion Rotor Standard Automotive Finish 11" Leaf Spring Rotor Silver Cadmium Plated 13" Torsion Rotor Silver Cadmium Plated 6450866-02 ROTOR11910A8 6450870-02 ROTOR13910A8 6450868-02 ROTOR11910A8SCAD 6450871-02 ROTOR13910A8SCAD 6450880 CMB11910ASCAD Leaf Spring Caliper Mounting Bracket Silver Cadmium Plated 6450746 ROTOR10ASPACER Rotor Spacer Standard Automotive Finish Rotor Spacer Silver Cadmium Plated 6450847 Leaf Spring Axle Kit 6450857 Torsion Axle Kit 6450756 ROTOR10ASPACERSCAD Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. WWW.TEXTRAIL.COM A-71 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 12-1/4” 9K - 15K Electric Brake Assemblies & Components Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly Adjuster Spring LH Adjuster Lever RH Adjuster Lever Adjuster Cable 10" Long Magnet Kit Magnet Kit Magnet Kit Magnet Spring Magnet Retaining Clip 7/16"-20 Anchor Post Flange Nut Magnet Retaining Clip LH Lever Arm Retainer RH Lever Arm Retainer LH Actuator Arm Assembly LH Actuator Arm Assembly RH Actuator Arm Assembly RH Actuator Arm Assembly Return Spring Adjuster Clip - Barrel End LH Adjuster Assembly Ref # 23-450 23-451 23-438 23-439 23-442 23-443 23-446 23-447 46-137 71-464 71-463 71-462 71-376 71-377 71-378 46-117 27-50 6-92-1 27-39 71-455-1 71-455-2 47-123-38 47-123-36 47-123-37 47-123-35 46-119 46-133 48-19 Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 RH Adjuster Assembly Adjuster Clip - Thread End LH Shoe & Lining Kit LH Shoe & Lining Kit LH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit Centering Spring 7/16"-20 x 1.75 Brake Mounting Bolt Dust Shield Dust Shield Dust Shield 7/16" Brake Mounting Lock washer 7/16"-20 Brake Mounting Hex Nut Wire Grommet 0.437 Dia. 48-20 46-132 71-499 71-501 71-503 71-498 71-500 71-502 46-136 7-116 36-115-21 36-115-22 36-115-23 5-8 6-17 46-16 1 1 1 1 1 1 1 1 2 7 1 1 1 7 7 1 A-72 WWW.TEXTRAIL.COM 9K - 10K GD 10K 12K 15K 12 1/4 x 3 3/8 6400044 6400045 12 1/4 x 4 12 1/4 x 5 12 1/4 x 5 6400019 6400018 6400023 6400022 6450275 6450146 6450150 6450088 6450174-01 6450275 6450146 6450150 6450088 6450174-01 6450275 6450146 6450150 6450088 6400025 6400024 6450275 6450146 6450150 6450088 6450169-01 6450232 6450194 6450177 6450102 6450211 6450212 6450183-01 6450232 6450194 6450177 6450102 6450211 6450212 6450267 6450267 6450237 6450101 6450011 6450268 6450237 6450101 6450011 6450268 6450237 6450101 6450011 6450010 6450100 6450010 6450100 6450010 6450100 6450048 6450048 6450047 6450097 6450020 6450047 6450097 6450020 6450117 7030116 6450181 6450001 6450117 7030116 6450181 6450001 6450232 6450194 6450177 6450102 6450211 6450212 6450271 6450232 6450194 6450177 6450102 6450211 6450212 6450271 6450270 6450270 6450237 6450101 6450011 6450010 6450100 6450059 6450041 6450060 6450042 6450097 6450020 6450118 6450097 6450020 6450269 7030116 6450181 6450001 7030116 6450181 6450001 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 12-1/4” 9K - 15K Hydraulic Brake Assemblies & Components Ref # Qty 9K - 10K GD 12 1/4 x 3 3/8 LH Hydraulic FSA Assembly 23-410 1 6400014 RH Hydraulic FSA Assembly 23-411 1 6400015 LH Hydraulic FSA Assembly 23-404 1 6400020 RH Hydraulic FSA Assembly 23-405 1 6400021 LH Hydraulic FSA Assembly 23-408 1 6400077 RH Hydraulic FSA Assembly 23-409 1 6400089 LH Hydraulic FSA Assembly 23-406 1 RH Hydraulic FSA Assembly 23-407 1 Dust Shield 36-115-21 1 Dust Shield 36-115-22 1 Dust Shield 36-115-23 1 Item Description 1 10K 12 1/4 x 4 15K 12 1/4 x 5 6400090 6400091 6450118 6450269 6450117 6450117 6450264 6450264 6450077 6450077 6450076 6450076 6450203 6450203 6450088 6450088 6450088 6450028 6450028 6450028 6450259 6450259 6450259 6450317 6450317 6450317 6450219 6450219 6450219 6450146 6450146 6450146 6450150 6450150 6450150 2 Retainer Ring 69-53 1 6450264 3 LH Shoe & Lining Kit 71-165 1 6450081 LH Shoe & Lining Kit 71-167 1 LH Shoe & Lining Kit 71-169 1 RH Shoe & Lining Kit 71-166 1 RH Shoe & Lining Kit 71-168 1 RH Shoe & Lining Kit 71-170 1 4 Shoe Hold Down Screw 7-113 2 6450203 6450203 5 Adjuster Cable 10" Long 71-462 1 6450088 6 Wheel Cylinder Kit 71-81 1 6450028 7 Cylinder Push Rod 54-33 2 6450259 8 Spider Assembly 36-63-6 1 6450317 9 Spring Retractor 46-87 1 6450219 10 LH Adjuster Lever 71-464 1 6450146 RH Adjuster Lever 71-463 1 6450150 11 12K 12 1/4 x 5 6450264 6450074 6450080 6450073 LH Adjuster Spring 46-135 1 6450013 6450013 6450013 6450013 RH Adjuster Spring 46-134 1 6450014 6450014 6450014 6450014 12 Cable Attachment Bracket 13 Spring Extension 71-456 1 6450280 6450280 6450280 6450280 46-131-1 1 6450291 6450291 6450291 6450291 14 Adjuster Clip - Barrel End 46-133 1 6450101 6450101 6450101 6450101 15 LH Adjuster Assembly 48-19 1 6450011 6450011 6450011 6450011 RH Adjuster Assembly 48-20 1 6450010 6450010 6450010 6450010 16 7/16"-20 x 1.75 Brake Mounting Bolt 7-116 7 6450020 6450020 6450020 6450020 17 Piston Stop 34-62 1 6450260 6450260 6450260 6450260 18 Adjuster Clip - Thread End 46-132 1 6450100 6450100 6450100 6450100 19 7/16"-20 Brake Mounting Hex Nut 6-17 7 6450181 6450181 6450181 6450181 20 7/16" Brake Mounting Lockwasher 5-8 7 7030116 7030116 7030116 7030116 WWW.TEXTRAIL.COM A-73 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 10K & 12K Hydraulic Disc Brake Assemblies & Components Item 1 2 3 Description Anchor Yoke Assembly (includes 6ea of Item 6) Caliper Assembly (includes items 3, 6, 9 & 10) Caliper Piston Disc Brake Replacement Pad Kit (includes items 4, 5, 8 & 11) Caliper Repair Kit (includes items 6, 7, 9 & 10 12 Shoulder Screw / Caliper Guide Bolt 5/8" x 5" 13 7/16"-20 x 1.75 Brake Mounting Bolt 14 1/2"-20 Grade B Flange Nut 15 7/16"-20 Grade 5 Hex Nut 16 1/2"-13 x 1/2"-20 x 2.38 Grade 5 Rotor Stud Ref # 90-2-2 89-2-2 54-66 Qty 1 1 2 10K & 12K 6450252 6450091 6450093 71-180 1 6450109 71-181 7-186 7-116 6-46 6-17 25-14 1 2 7 8 7 8 6450025 6450200 6450020 9000137 6450181 6450242 See page A-70 for hub or rotor replacement WWW.TEXTRAIL.COM A-74 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Air Brake Components ‘PQ’ Style 6450274 6450096 Qty per Brk Item 1 2 3 4 Description Ref # 10K 12K-15K 12 1/4 x 4 12 1/4 x 5 Shoe & Lining Assembly - Shoe & Block 40-320-1 2 6450262 6450263 Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) Spider Anchor Bushing Pin 1.26”ID X 1.37” OD 1.45” Long Shoe Keeper Spring 40-320-2 40-320-3 K71-460 1 1 1 2 2 6050047 6050045 6450274 6400001 6050046 5 6 7 8 9 10 11 Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia Roller Pin Retainer Ring for 0.750 Shaft Washer Plain 0.75” x 0.149” Roller Pin Spacer Roller 0.75” ID X 1.5” OD x 1.38” Steel Plated & Knurled Retractor Spring Retainer Pin Roller Pin Knurled 0.75” x 2.16” Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft “D” Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88” OD x 1.5” ID x 1.5” Long 15 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4”-27 65 Degree Angle 1/8”-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer Camshaft End Retainer 21 1/4"-20 Zinc Plated Hex Nut 22 1/4" 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4"-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125" RH Small S Head Hi Rise Cam Shaft 21.125" LH Small S Head Hi Rise Cam Shaft 16.375" RH Small S Head Hi Rise Cam Shaft 16.375" LH Small S Head Hi Rise Cam Shaft 22.312" RH Small S Head Hi Rise Cam Shaft 22.312" 28 Nut - 2-5/8" Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8" Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw 2 2 2 1 1 2 2 K71-101 34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 97-2 97-7 24-203 24-101-1 7-237 1 1 1 1 2 34-32 34-31 6450096 6050048 6050049 6050050 6050051 6050053 9000096 6050048 6050049 6050050 6050051 6050053 9000096 6050052 6050052 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050035 6050036 6050036 6050033 6050033 6050034 6050034 6050037 6050037 6050038 6050038 8750056 8750056 8750058 8750058 7800073 7800073 8750055 8750055 6050055 6050055 6050056 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER * Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness. WWW.TEXTRAIL.COM A-75 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 22.5K - 27.5K Replacement Hub & Hub and Drum Components 8 Stud on 275mm (10.827") Hubs with Outboard Drums For use with 17.5" or 19.5" 221mm piloted wheels Item Part # 1 7800030 2 7800075 3 7800074 4 7800031 7700183 5 7700035 6 7700178 7 7700146 8 7700177 9 7700172 12 7700171 A B C D E F G H I J OIL LUBE PARTS Description HM212049 Outer Bearing Cone HM212011 Outer Race Cup HM218210 Inner Bearing Cup HM218248 Inner Race Cone 940-4009 Oil Cap Kit (includes items 5-8) 71-124 Oil Cap Gasket 21-38-2 Oil Cap 7-157 Oil Cap Hex Screw 5/16"-18 x 0.75 5-100 Oil Cap Lock Washer 5/16" 6-118 Swivel Flange Nut 7-194 Press-In Stud M22 x 1.5 x 2.47" L 24-200-1 ABS Tone Ring Ref # Item Part # Drums 10 7650209 Item Part # Hubs 11 Ref # DRUM Description Bolt Circle 9-116-1 12-1/4" x 7-1/2" Disc Wheel 8 on 275mm Replacement HUBS Ref # Description 8-396-5 8-396-7 Steel Wheel Hub Assy ABS Steel Wheel Hub Assy Bolt Circle 8 on 275mm 8 on 275mm Hub & Drum Dimensional Information 3.34" Cup to Cup 0.75" Cup to Mounting Face 10.43" Cup to End of Drum 12.25" Brake Diameter 7.50" Shoe Brake Width 11.22" Drum Overall Width 9.00" Pilot Diameter (Drum) 10.827" Bolt Circle 275mm M22 x 1.5 Bolt Diameter 0.313" Hub Cap Hole Mounting 6 Holes 5.50 BC 1.575" Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM A-76 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 22.5K - 27.5K Replacement Hub & Hub and Drum Components 10 Stud on 8.75 Hubs with Inboard Drums For use with 15 or 17.5" ball seat mounted steel wheels Item Part # Ref # 1 7800074 HM218210 2 7800031 HM218248 3 7800075 HM212011 4 7800030 HM212049 7700183 940-4009 5 7700035 71-124 6 7700178 21-38-2 7 7700146 7-157 8 7700177 5-100 9 7700042 6-70-1 7700041 6-70-2 10 11 7700047 6-69-1 7700046 6-69-2 7700149 25-56-2 7700148 25-56-1 14 7030108 5-102 15 9000139 6-47 24-200-1 A 3.34" B 0.81" C 10.57" D 12.25" E 7.50" F 10.50" G 7.12" H 8.75" I 0.75" J 0.313" 1.575" OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 5-8) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring Item Part # Drums 13 7650006 Item Part # Hubs & Drums 12 7650500 7650501 Ref # DRUM Description 9-40-1 12-1/4" x 7-1/2" Disc Wheel 10 on 8.75 Replacement HUBS Ref # Description 8-277-04 8-277-05 8-277-23 8-277-22 LH Hub 10 8.75 BC RH Hub 10 8.75 BC LH Hub 10 8.75 BC ABS RH Hub 10 8.75 BC ABS Bolt Circle Bolt Circle 10 on 8.75 10 on 8.75 10 on 8.75 10 on 8.75 Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM A-77 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES 22.5K - 27.5K Replacement Hub & Hub and Drum Components D2-16 10 Stud on 11 1/4" Hubs with Inboard Drums Item Part # Ref # 1 7800074 HM218210 2 7800031 HM218248 3 7800075 HM212011 4 7800030 HM212049 7700183 940-4009 5 7700035 71-124 6 7700178 21-38-2 7 7700146 7-157 8 7700177 5-100 9 7700042 6-70-1 7700041 6-70-2 10 7700047 6-69-1 7700046 6-69-2 11 7700149 25-56-2 7700148 25-56-1 14 7030108 5-102 15 9000139 6-47 24-200-1 A B C D E F G H I 3.34" 0.81" 9.89" 16.50" 7.00" 9.58" 9.44" 11.25" 0.75" J 0.313" 1.575" OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Inner Bearing Cup Inner Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring DRUM Item Part # Drums 13 Item Part # Hubs & Drums 12 Ref # Description Bolt Circle 9-42-1 16-1/2" x 7" Disc Wheel 10 on 11.25 Replacement HUBS Ref # Description LH Hub 10 11.25 BC 8-279-5 RH Hub 10 11.25 BC 8-279-4 Bolt Circle 10 on 11.25 10 on 11.25 Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM A-78 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S 22.5K - 27.5K Replacement Hub & Hub and Drum Components D2-16 10 Stud on 11 1/4" Hubs with Outboard Drums Item Part # Ref # 1 7800074 HM218210 2 7800031 HM218248 3 7800075 HM212011 4 7800030 HM212049 5 7700183 940-4009 6 7700035 71-124 7 7700178 21-38-2 8 7700146 7-157 9 7700177 5-100 10 7700042 6-70-1 7700041 6-70-2 11 12 7700047 6-69-1 7700046 6-69-2 7700149 7-242-1 7700148 7-242 6-124-2 6-124-1 24-200-1 A 3.34" B 0.73" C 9.87" D 16.50" E 7.00" F 10.60" G 8.78" H 11.25" I 0.75" J 0.313" 1.575" OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut ABS Tone Ring Item Part # Drums 13 Item Part # Hubs & Drums 14 Ref # DRUM Description Bolt Circle 9-43-3 16-1/2" x 7" Disc Wheel 10 on 11.25 Ref # Replacement HUBS Description LH Wheel Hub Assy RH Wheel Hub Assy 8-290-70 LH ABS Wheel Hub Assy 8-290-69 RH ABS Wheel Hub Assy Bolt Circle 8-290-68 10 on 11.25 8-290-67 10 on 11.25 10 on 11.25 10 on 11.25 Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter (Drum) Bolt Circle 275mm Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM A-79 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES S Head Camshafts S Head Camshaft 28 - Spline Small Head Hi-Rise 12.25" Brakes Description LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline WWW.TEXTRAIL.COM A-80 Ref # 34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 34-188-9 34-189-9 Part # 6050035 6050036 6050033 6050034 6050037 6050038 6050030 6050031 A 21.125 21.125 16.375 16.375 22.312 22.312 26.500 26.500 B 2.219 2.219 2.219 2.219 2.219 2.219 2.219 2.219 C 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Air Brake Components Qty per Brk Item Description 1 Shoe & Lining Assembly - Shoe & Block Brake Shoe Hardware Kit (Contains Items 2-8) 2 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 3 Bushing - Spider Anchor Pin 4 Retractor Spring 16-1/2" Brake - Orange 5 Shoe Keeper Spring - Orange 6 Anchor Pin 7 Retainer Pin - Retractor Spring 8 Roller Retainer Camshaft Repair Kit (Contains Items 12-20) 9 Camshaft Washer 10 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 11 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 12 Washer Plain Camshaft Spider End 13 Camshaft Retainer Ring 14 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 15 Camshaft Support Bushing 16 Washer Plain 1.26 x 1.88 x .06 Camshaft 17 Camshaft End Retainer 18 1/4”-20 Zinc Plated Hex Nut 19 1/4” 0.062 Zinc Plated Lock Washer 20 Plate - Bushing Retainer 21 Plate - Camshaft Support Bracket 22 1/4”-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 23 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 24 LH Small S Head Hi Rise Cam Shaft 21.125” RH Small S Head Hi Rise Cam Shaft 21.125” LH Small S Head Hi Rise Cam Shaft 16.375” RH Small S Head Hi Rise Cam Shaft 16.375” LH Small S Head Hi Rise Cam Shaft 22.312” RH Small S Head Hi Rise Cam Shaft 22.312” 25 Nut - 2-5/8” Fine Outer Spindle Nut 26 Lock washer - Tab 27 Lock washer - Indexing 28 Nut - 2-5/8” Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw Ref # 40-180 K71-460 2 1 2 2 1 2 2 2 2 K71-135 22.5K-27.5K 16 1/2 x 7" 6450285 6450274 6450284 6050048 6050049 6050050 6050051 6050053 9000096 34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750056 7800073 8750055 97-2 97-3 24-203 24-101-1 7-237 1 1 1 1 2 6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 34-32 34-31 6450274 6050052 6450284 * Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness. WWW.TEXTRAIL.COM A-81 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Air Brake Components Item Description Shoe & Lining Assembly - Shoe & Block 1 Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 2 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) 3 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 4 Shoe Keeper Spring 5 Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia 6 Roller Pin Retainer Ring for 0.750 Shaft 7 Washer Plain 0.75" x 0.149" Roller Pin Spacer 8 Roller 0.75" ID X 1.5" OD x 1.38" Steel Plated & Knurled 9 Retractor Spring 10 Retainer Pin 11 Roller Pin Knurled 0.75" x 2.16" Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft "D" Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 15 Washer Plain 1.5 x 2.25 x .09 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer 21 1/4”-20 Zinc Plated Hex Nut 22 1/4” 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4”-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125” RH Small S Head Hi Rise Cam Shaft 21.125” LH Small S Head Hi Rise Cam Shaft 16.375” RH Small S Head Hi Rise Cam Shaft 16.375” LH Small S Head Hi Rise Cam Shaft 22.312” RH Small S Head Hi Rise Cam Shaft 22.312” 28 Nut - 2-5/8” Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8” Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw Ref # Qty per Brk 40-320-1 40-320-2 40-320-3 K71-460 2 1 1 1 2 2 2 2 2 1 1 2 2 K71-101 22.5K-27.5K 12 1/4 x 71/2" 6450273 6400253 6400254 6450274 6450274 6450096 6050048 6050049 6050050 6050051 6050053 9000096 34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750058 7800073 8750055 97-2 97-3 24-203 24-101-1 7-237 1 1 1 1 2 6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 34-32 34-31 6050052 6450096 * Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness. WWW.TEXTRAIL.COM A-82 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Replacement Spindles Spindles are machined to 1"-14 Thread with .190 cotter pin hole and come with spindle nut, washer and cotter pin. EZ-Lube Spindles come with spindle nut washer and tang washer. Part# Ref # 8750016 R104BT8 8750057 R104BT16 8750087 R104BT16EZ 8750017 R104BTR 8750089 R104BT8-38 8750011 R204BT8 8750090 R204BTR 8750012 SP204BT8 8750021 SP20484 8750023 SP30684 8750091 R20484 8750028 R20484EZ 8750029 R30484EZ 8750022 R30484 8750054 R30684 8750024 R306.584 8750014 R40484 8750015 R40684 8750088 R50642 8750018 R40642 8750020 R50642 8750013 SP50642 Description BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN BT16 EZ-LUBE SPINDLE W/NUT & WASHERS BT16 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 EZ-LUBE W/NUT & WASHERS NO.84 EZ-LUBE W/NUT & WASHERS NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 SPNDL W/NUT WASHER &C-PIN 10-7/8" NO.84 SPNDL W/NUT WASHER &C-PIN 11-3/8" NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.42 GRSLUBE FLGD W/NUT&WSHR NO.42 SPNDL W/NUT WASHER &C-PIN NO.42 SPNDL W/NUT WASHER &C-PIN 42 SPINDLE SQUARE W/NUT WASHER &C-PIN A F B C D Shank Dia. Shank Length Seal Inner Bearing Outer Bearing E Capacity 1.25 1.25 1.25 1.25 1.38 1.50 1.50 1.50 1.50 1.75 1.50 1.50 1.75 1.75 1.75 1.75 2.00 2.00 2.25 2.00 2.25 2.00 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 3.50 3.50 3.50 3.50 3.50 4.00 6.00 6.50 4.00 6.00 3.00 6.00 6.00 6.50 1.24 1.24 1.24 1.50 1.24 1.24 1.50 1.24 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 2.24 2.24 2.24 2.24 0.99 1.06 1.06 1.06 0.99 0.99 1.06 0.99 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.74 1.74 1.74 1.74 0.99 1.06 1.06 1.06 0.99 0.99 1.06 0.99 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.25 1.25 1.25 1.25 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 2,600 lb. 3,000 lb. 3,000 lb. 3,000 lb. Agricultural Spindles Part# Ref # 8750050 S2500F 8750060 S3500F 8750070 S4500F 8750080 S6000F Description 2.5K Round AG Spindle 3.5K Round AG Spindle 4.5K Round AG Spindle 6K Round AG Spindle WWW.TEXTRAIL.COM A F B C D E G Shank Dia. Overall Length Seal Inner Bearing Outer Bearing Treads Distance to Center line of Cotter Pin 1.75 2.00 2.25 2.75 12.31 11.00 12.00 14.00 1.75 2.00 2.25 2.75 1.374 1.624 1.780 2.164 1.249 1.249 1.249 1.624 3/4"-16 3/4"-16 3/4"-16 1"-14 3.59 4.91 4.99 5.24 A-83 Capacity 2,500 lb. 3,500 lb. 4,500 lb. 6,000 lb. 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Spindle Washers Type 3 1 2 4 1 1 5 3 5 3 n/a 6 6 6 1 2 2 1 Part# 8750035 8750036 8750033 8750040 8750046 8750034 8750038 8750037 8750041 8750042 7800073 7700125 7700129 7700131 8750039 8750032 8750031 8750096 Ref # 16-5863 SW1001 5-23 5-101 5-151 5-57 5-71 5-70 5-59 5-60 5-98 5-150 5-147-1 5-149 90525 H500-18 H500-17 SW750 Description Tongue Washer - Replacement Spindles Round Washer - Replacement Spindles Dexter D-Washer - 2K thru 6K (655 Hub) Dexter EZ-Lube Tang Washer - 2K thru 8K (before 6/02) Dexter EZ-Lube D-Washer - 2K thru 8K (before 6/02) Dexter D-Washer - 6K (865 Hub) thru 8K (9K before 10/89) Dexter Tang Washer - 9K & 10GD Dexter Tongue Washer - 9K & 10GD Dexter Tang Washer - 10K, 12K & 15K Dexter Tongue Washer - 10K, 12K & 15K Dexter Indexing Lock Washer 22.5 thru 27K 0.250" 14 Equally Spaced Holes Dexter 35MM Nev-R-Lube Spindle Washer 1.88" OD x 0.250"W Dexter 42MM Nev-R-Lube Spindle Washer 2.25" OD x 0.250"W Dexter 50MM Nev-R-Lube Spindle Washer 2.50" OD x 0.310"W AL-KO / Hayes Round Washer - 10-16K AL-KO / Belshe #99 Spindle Thin D-Washer AL-KO / Belshe #99 Spindle Thick D-Washer Reliable AG Round Washer x 1.750" OD x 0.183"W ID 1" 1" 1" 1" 1" 1" 1.50" 1.50" 1.75" 1.75" 2.625" 1.062" 1" 1.062" 1.50" 0.812" Spindle Nuts / Jam Nuts / Cotter Pins 1 Type 3 7 8 5 1 2 6 4 4 2 4 4 Item # 8750005 8750006 8750030 8750007 8750008 8750010 8750051 8750049 7700126 8750003 8750002 8750061 8750063 8750064 Ref # 6-1 6-191 6-190 6-96 6-84 090623 6-114 6-115 6-183 19-2 091903 SN750 SCP103 SCP102 Type 3 3 3 3 Item # 8750100-01 8750101-01 8750102-01 8750103-01 Ref # TTSN01 TTSN02 TTSN03 TTSN04 Description 1"-14 Castle Nut 2K - 8K (Dexter 2-8K & 9K before 10/89) 1"-14 Jam Nut - 2K thru 8K (Dexter use after 8/03) Spindle Nut Retainer - Use with 6-191 1-1/2"-12 Nut - Dexter 9K & 10GD 1-3/4"-12 Nut - Dexter 10K thru 15K 1-1/2"-12 Castle Nut - #99 Spindle (AL/KO #99 & #89) 2-5/8"-6 Inner Nut - 20K thru 27K 2-5/8"-6 Outer Nut - 20K thru 27K Spindle Nut - Dexter Nev-R-Lube Cotter Pin 1/8" x 1-3/4" long Cotter Pin - AL/KO 8K thru 16K (#89 & 99 spindle) Reliable Castle Nut 3/4"-16 ID Reliable Cotter Pin - 0.148" Dia x 5/16" W x 1.50" Long Reliable Cotter Pin - 0.174" Dia x 3/8" W x 1.937" Long Spindle Nut Kits Description 1" Castle Nut with 1" Tongue Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" Round Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 3.5-6K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 7-8K (2ea) WWW.TEXTRAIL.COM A-84 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Agricultural Hub Assemblies & Components 7650150-02 25555FC 2.5K 555 1/2" STUD AG HUB ASSEMBLY Item Part # Ref # 1 8750050 S2500F Spindle Round 2.5K AG 1.75" Dia x 12.31" OAL 1-3/8" Bearing 2 7700245 SL175 Single Lip Seal 2.722" OD x 1.75" ID x 0.359"W 3 7800012 LM48548 Inner Bearing Cone 4 7800049 LM48510 Inner Bearing Cup 5 7800045 LM67010 Outer Bearing Cup 6 7800043 LM67048 Outer Bearing Cone 7 8750096 SW750 Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W 8 8750061 SN750 Spindle Nut 3/4"-16 ID Castle 9 8750063 SCP103 Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L 10 7700275 1604 11 7650150 25555F 1/2" Studded Black Hub 5 on 5.50 Bolt Circle 12 7700285 STN509 1/2"-20 90° Cone Nut Zinc Grade 5 13/16"W 7650150-02 25555FC 1/2" Studded Black Hub Assembly 5 on 5.50 Bolt Circle 7650170-02 35660FC Description Grease Cap EZ Lube 2.440" 3.5K 660 9/16" STUD AG HUB ASSEMBLY Item Part # Ref # 1 8750060 S3500F Spindle Round 3.5K AG 2" Dia x 11" OAL 1-5/8" Bearing 2 7700250 SL200 Single Lip Seal 3.066" OD x 2" ID x 0.250"W 3 7800043 LM67048 Inner Bearing Cone 4 7800078 LM501349 Inner Bearing Cup 5 7800045 LM67010 Outer Bearing Cup 6 7800079 LM501310 Outer Bearing Cone 7 8750096 SW750 Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W 8 8750061 SN750 Spindle Nut 3/4"-16 ID Castle 9 8750063 SCP103 Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L 10 7700275 1604 11 7650170 35660F 9/16" Studded Black Hub 6 on 6.00 Bolt Circle 12 7700037 STN569 9/16"-18 90° Cone Nut Zinc Grade 5 1"W 7650170-02 35660FC 9/16" Studded Black Hub Assembly 6 on 6.00 Bolt Circle WWW.TEXTRAIL.COM Description Grease Cap EZ Lube 2.440" A-85 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S 7650180-02 45880FC 4.5K 880 9/16" STUD AG HUB ASSEMBLY Item Part # Ref # 1 8750070 S4500F Spindle Round 4.5K AG 2.25" Dia x 14" OAL 1-3/4" Bearing 2 7700255 SL226 Single Lip Seal 3.066" OD x 2.25" ID x 0.250"W 3 7800081 LM603049 Inner Bearing Cone 4 7800080 LM603011 Inner Bearing Cup 5 7800045 LM67010 Outer Bearing Cup 6 7800043 LM67048 Outer Bearing Cone 7 8750096 SW750 Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W 8 8750061 SN750 Spindle Nut 3/4"-16 ID Castle 9 8750063 SCP103 Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L 10 7700275 1604 11 7650180 45880F 9/16" Studded Black Hub 8 on 8.00 Bolt Circle 12 7700037 STN569 9/16"-18 90° Cone Nut Zinc Grade 5 1"W 7650180-02 45880FC 9/16" Studded Black Hub Assembly 8 on 8.00 Bolt Circle 7650190-02 60880FC Description Grease Cap EZ Lube 2.440" 6K 880 5/8" STUD AG HUB ASSEMBLY Item Part # Ref # 1 8750080 S6000F Spindle Round 6K AG 2.75" Dia x 14" OAL 2-1/8" Bearing 2 7700260 SL275 Single Lip Seal 3.756" OD x 2.75" ID x 0.250"W 3 7800079 LM501310 Inner Bearing Cone 4 7800082 JLM506810 Inner Bearing Cup 5 7800078 LM501349 Outer Bearing Cup 6 7800083 JLM506849 7 8750036 SW1001 Spindle Washer Round 1.062" ID x 2.130" OD x 0.245"W 8 8750005 SN1001 Spindle Nut 1"-14 ID Castle 9 8750064 SCP102 Cotter Pin 0.174 DIA x 3/8" W x 1-15/16" L 10 7700280 1609 11 7650190 60880F 5/8" Studded Black Hub 8 on 8.00 Bolt Circle 12 7700290 STN629 5/8"-18 90° Cone Nut Zinc Grade 5 15/16"W 7650190-02 60880FC 5/8" Studded Black Hub Assembly 8 on 8.00 Bolt Circle WWW.TEXTRAIL.COM Description Outer Bearing Cone Grease Cap EZ Lube 3.125" A-86 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES Agricultural Hub Assemblies & Components AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Axle Spring Seats Item # 9000181 9000182 9000183 9000185 9000186 9000179 9000180 Ref # Description 3-49 SPRING SEAT FOR 1.75" RND AXLE 3-43 SPRING SEAT FOR 2 3/8" RND AXLE 3-42 SPRING SEAT FOR 3" RND AXLE 3-48 SPRING SEAT FOR 3 1/2" RND AXLE 3-51 SPRING SEAT FOR 4" RND AXLE 3-72 SPRING SEAT FOR 5" RND AXLE - 10GD 2.5" SPR 3-66 SPRING SEAT FOR 5" RND AXLE - 10K-15K 3" SPR Brake Mounting Flanges Item # 6450033 6450034 6450029 Ref # Description 4-34 Brake Flange 2K Type K BTR 4-35 Brake Flange 3.5K Type K 4-44-1 Brake Flange 5.2K - 7K Type B Use With Holes Bolt Centers Pilot 1.75" Round 4-Hole 4" 1.64" 2.375" Round 4-Hole 4" 2.27" 3" Round 5-Hole 3.88" 2.75" Brake Mounting Hardware Item # 6450241 6450307 6450240 6450019 6450020 7700011 7700010 6450181 6450177 6450182 6450308 9000137 7030116 9000250 9000251 Ref # Description 7-75 7/16"-20 x 0.89" Grade 5 Pressed Brake Mounting Stud 7-271 7/16"-20 x 1.18" Grade 5 Pressed Brake Mounting Stud 7-112 3/8"-24 x 0.88" Grade 5 Pressed Brake Mounting Stud 7-97 1/2"-20 x 1.75" Grade 5 Pressed Brake Mounting Stud 7-116 7/16"-20 x 1.75" Grade 5 Brake Mounting Bolt 7-245 1/2"-13 X 1.5" Grade 8 Brake Drum Mounting Bolt 7-244 1/2"-13 X 1.75" Grade 8 Brake Drum Mounting Bolt 6-17 7/16"-20 Grade 5 Brake Mounting Hex Nut 6-92 7/16"-20 Grade B Lock Flange Nut 6-10 3/8"-20 Grade 5 Brake Mounting Hex Nut 6-193 3/8"-24 Grade B Brake Mounting Nut 6-46 1/2"-20 Grade B Brake Mounting Nut 5-8 7/16" Brake Mounting Lock Washer 33621 3/8" Brake Mounting Lock Washer 5-58 1/2" Brake Mounting Lock Washer WWW.TEXTRAIL.COM A-87 Axle 2K - 3.5K 4.4K 5.2K - 7K 7.2K - 9K 9K - 15K 9K - 10KGD 10KHD - 15K 2K - 15K 2K - 15K 5.2K - 7K 5.2K - 7K 7.2K - 9K 2K - 15K 5.2K - 7K 7.2K - 9K 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Grease & Oil Seals Oil & Utilized Greased Grease Seals Item # 7700060 7700082 7700083 7700085 7700086 7700073 7700240 7700245 7700250 7700255 7700260 7700061 7700071 7700137 7700063 7700075 7700062 7700064 7700065 6050049 Ref# 12192TB 10-9 10-60 10-19 10-10 10-36 SL150 SL175 SL200 SL226 SL275 3150 3149 168233 29031 475380 10-42 10-40 10-41 10-52 Description BT8 Double Lip Grease Seal 2K BT16 Single Lip Grease Seal 2K BT16 Double Lip Grease Seal 2K 84F Double Lip Grease Seal 3.5K - 4.4K 42F Double Lip Grease Seal 5.2K - 7K 42F Double Lip Grease Seal 5.2K - 7K AG Single Lip Seal 1.2K AG Single Lip Seal 2.5K AG Single Lip Seal 3.5K AG Single Lip Seal 4.5K AG Single Lip Seal 6K HADCO-Single Slip Grease Seal HADCO-Single Slip Grease Seal Nitrile / Unique #84 Single Lip Grease Seal Hayes #8 Spindle Grease Seal BTI #79-99 Spindle Grease Seal Mobile Home Single Lip Grease Seal 2.8K Mobile Home Single Lip Grease Seal Mobile Home Single Lip Grease Seal Camshaft Case Single Lip Grease Seal I.D. 1.249 1.500 1.500 1.719 2.125 2.250 1.500 1.750 2.000 2.250 2.750 1.750 2.000 1.688 1.875 2.375 1.750 1.938 1.938 1.500 O.D. 1.983 1.987 1.987 2.565 3.376 3.376 2.332 2.722 3.066 3.066 3.756 2.356 2.875 2.332 3.000 3.623 2.331 2.510 2.523 1.875 2.250 2.750 2.375 2.875 3.125 4.625 4.733 - 3.376 3.779 3.376 3.880 4.506 6.006 6.000 - Oil Seals 7700088 7700076 7700089 7700081 7700077 7700079 7700188 7700189 10-63 568303 10-48 10-51 10-56 10-55-1 320-2110 315-1504 Unitized Oil Seal Dexter 5.2K - 7K / Hayes 8K Hayes/Texoma #99 Spindle CR Oil Seal Unitized Double Lip / Double Case Oil Seal 8K - 9K Unitized Oil Seal 9K - 10K General Duty Unitized Oil Seal 10K - 15K Unitized Oil Seal 20K - 25K Stemco Oil Seal 22.5K Stemco Wear Ring 22.5K WWW.TEXTRAIL.COM A-88 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Replacement Parts Replacement Bearings Item # Ref# 7800015 09067 7800008 LM11949 7800001 1779 7800007 L44643 7800010 L44649 7800027 15123 7800017 14125A 7800028 02475 7800043 LM67048 7800029 2585 7800016 M88048 7800012 LM48548 7800006 L68149 7800013 2788 7800026 25580 7800081 LM603049 7800087 25590 7800009 JM205149 7800014 28580 7800083 JLM506849 7800025 28682 7800024 387A 7800011 45290 7800003 JM511946 7800004 3984 7800084 39590 7800030 HM212049 7800079 LM501310 7800031 HM218248 7800040 395S 7800063 7800065 7800067 31-72-3 31-73-3 31-71-3 Description Bearing Cone for Race 09194 Bearing Cone for Race LM11910 Bearing Cone for Race 1729 Bearing Cone for Race L44610 Bearing Cone for Race L44610 Bearing Cone for Race 15245 Bearing Cone for Race 14276 Bearing Cone for Race 02420 Bearing Cone for Race LM67010 Bearing Cone for Race 2520 Bearing Cone for Race M88010 Bearing Cone for Race LM48510 Bearing Cone for Race L68111 Bearing Cone for Race 2729 Bearing Cone for Race 25520 Bearing Cone for Race LM603011 Bearing Cone for Race 25523 Bearing Cone for Race JM205110 Bearing Cone for Race 28521 Bearing Cone for Race JLM506810 Bearing Cone for Race 28622 Bearing Cone for Race 382A Bearing Cone for Race 45220 Bearing Cone for Race JM511910 Bearing Cone for Race 3920 Bearing Cone for Race 39520 Bearing Cone for Race HM212011 Bearing Cone for Race LM501349 Bearing Cone for Race HM218210 Bearing Cone for Race 394A Replacement Races I.D. 0.750 0.750 0.938 1.000 1.063 1.25 1.25 1.250 1.250 1.313 1.313 1.375 1.378 1.500 1.750 1.781 1.796 1.969 2.000 2.165 2.250 2.250 2.250 2.559 2.625 2.625 2.625 2.891 3.542 4.331 Item # 7800051 7800046 7800046 7800055 7800056 7800057 7800045 7800058 7800049 7800041 7800050 7800054 7800080 7800033 7800044 7800048 7800082 7800053 7800052 7800039 7800042 7800086 7800075 7800078 7800074 7800005 Ref# Description 09194 Race for Bearing Cone 09067 LM11910 Race for Bearing Cone LM11949 1729 Race for Bearing Cone 1779 L44610 Race for Bearing Cone L44643 L44610 Race for Bearing Cone L44649 15245 Race for Bearing Cone 15123 14276 Race for Bearing Cone 14125A 02420 Race for Bearing Cone 02475 LM67010 Race for Bearing Cone LM67048 2520 Race for Bearing Cone 2585 M88010 Race for Bearing Cone M88048 LM48510 Race for Bearing Cone LM48548 L68111 Race for Bearing Cone L68149 2729 Race for Bearing Cone 2788 25520 Race for Bearing Cone 25580 LM603011 Race for Bearing Cone LM603049 25523 Race for Bearing Cone 25590 JM205110 Race for Bearing Cone JM205149 28521 Race for Bearing Cone 28580 JLM506810 Race for Bearing Cone JLM506849 28622 Race for Bearing Cone 28682 382A Race for Bearing Cone 387A 45220 Race for Bearing Cone 45290 JM511910 Race for Bearing Cone JM511946 3920 Race for Bearing Cone 3984 39520 Race for Bearing Cone 39590 HM212011 Race for Bearing Cone HM212049 LM501349 Race for Bearing Cone LM501310 MH218210 Race for Bearing Cone MH218248 394A Race for Bearing Cone 395S O.D. 1.938 1.781 2.240 1.980 1.980 2.441 2.717 2.688 2.328 2.750 2.688 2.563 2.362 3.000 3.265 3.063 3.265 3.543 3.265 3.543 3.844 2.810 4.125 4.331 4.438 4.438 4.813 1.625 5.786 4.331 Nev-R-Lube Bearing Nev-R-Lube 35MM x 64MM x 37MM Bearing Nev-R-Lube 42MM x 76MM x 39MM Bearing Nev-R-Lube 50MM x 84MM x 54MM WWW.TEXTRAIL.COM 35MM 42MM 50MM A-89 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Bearing Kits Part # 7800071-01 7800017 7800056 7800026 7800054 7700073 8750003 8750040 7800070-01 7800027 7800055 7800026 7800054 7700073 8750003 8750040 7800059-01 7800010 7800046 7800006 7800041 7700085 8750003 8750040 7800061-02 7800043 7800045 7800006 7800041 7700085 8750003 8750040 7800037-01 7800007 7800046 7700060 8750003 8750040 7800038-01 7800010 7800046 7700083 8750003 8750040 Ref# TTBK428 14125A 14276 25580 25520 10-36 19-2 5-101 TTBK426 15123 15245 25580 25520 10-36 19-2 5-101 TTBK841 L44649 L44610 L68149 L68111 10-19 19-2 5-101 TTBK844 LM67048 LM67010 L68149 L68111 10-19 19-2 5-101 TTBKBT8 L44643 L44610 12192TB 19-2 5-101 TTBKBT1 L44649 L44610 10-60 19-2 5-101 Description Bearing Kit #42 Spindle 14125A/25580 865 1-Wheel Cone Bearing Race for 14125A Bearing Cone Cone Bearing Race for 25520 Bearing Cone Double Lip Grease Seal 2.25" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #42 Spindle 15123/25580 655 1-Wheel Cone Bearing Race for 15123 Bearing Cone Cone Bearing Race for 25520 Bearing Cone Double Lip Grease Seal 2.25" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #84 Spindle L44649/L68149 3.5K 1-Wheel Cone Bearing Race for L44649 Bearing Cone Cone Bearing Race for L68149 Bearing Cone Double Lip Grease Seal 1.719" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #84 Spindle LM67048/L68149 4.4K 1-Wheel Cone Bearing Race for LM67048 Bearing Cone Cone Bearing Race for L68149 Bearing Cone Double Lip Grease Seal 1.719" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit 1" BT8 Spindle 2K L44643 1-Wheel Cone Bearing Race for L44643 Bearing Cone Double Lip BT8 Grease Seal 1.249" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit 1.125" BT16 Spindle 2K L44649 1-Wheel Cone Bearing Race for L44649 Bearing Cone Double Lip BT16 Grease Seal 1.500" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" WWW.TEXTRAIL.COM A-90 Qty 1 1 1 1 1 1 1 1.125 2.717 1.750 3.265 3.376 1 1 1 1 1 1 1 1.125 2.441 1.750 3.265 3.376 1 1 1 1 1 1 1 1.063 1.980 1.378 2.362 2.565 1 1 1 1 1 1 1 1.250 2.328 1.378 2.362 2.565 2 2 1 1 1 1.000 1.980 1.983 2 2 1 1 1 1.063 1.980 1.987 7800059-01 7800071-01 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S Grease Caps Part # 7700025-01 7700186-01 7700016-01 7700027-01 7700018-01 7700270 7700024 7700025 7700026 7700275 7700016 7700027 7700018 7700186 7700019 7700280 7700200 7700021 7700022 7700053 Ref # TTGC200 TTGC272 TTGC246 TTGC245 TTGC273 1527 21-3 21-3-1 21-41-2 1604 21-43-1 21-1 21-43-1 21-39 21-43-3 1609 1602 568124 092105 85-1 Description 2-each Drive-in Grease EZ-Lube Caps with Plugs 2-each Drive-in Grease Standard Caps with Plugs 2-each Drive-in Grease EZ-Lube Caps with Plugs 2-each Drive-in Grease Standard Caps with Plugs 2-each Drive-in Grease EZ-Lube Caps with Plugs Drive-in Grease AG Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap Drive-in Grease EZ-Lube Cap - Chrome Drive-in Grease AG Cap Drive-in Grease EZ-Lube Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap - Chrome Drive-in Grease AG Cap Drive-in Grease AG Cap Drive-in Grease Standard Cap Drive-in Grease Standard Cap Plug for Drive-In EZ-Lube Grease Caps Part # 7700029-01 7700030-01 7700215-02 7700029 7700030 7700215 7700178 7700055 7700054 7700216 7700035 7700052 7700051 7700028 7700023 7700122 7700169 7700057 Ref # TTOC261 TTOC373 TTOC374 21-35 21-36 21-88 21-38-2 10-45 10-50 10-163 71-124 46-32 46-52 K363587 K568220 568298 568297 568223 Description Oil Cap Kit with O-Ring & Plug 6K - 8K & 9K (Pre-10/1989) Oil Cap Kit with O-Ring & Plug 9K (Post-10/1989) - 15K 2-Piece H-D Oil Cap Kit with O-Ring & Plug 9K - 10K General Duty 1-Piece H-D Dexter Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter Oil Cap 9K - 10KGD 1-Piece H-D Dexter Bolt-On Oil Cap with Vent plug 20K-25K Dexter O-Ring for Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter O-Ring for Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter O-Ring for Oil Cap 9K - 10KGD 1-Piece H-D Dexter Gasket for Bolt-On Oil Cap with Vent plug 20K-25K Dexter Plug for Oil Cap Dexter Oil Fill Hole Plug for 8K - 15K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 7K - 8K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 10KGD - 16K AL-KO Gasket for Oil Cap 8K AL-KO Gasket for Oil Cap 10KGD - 16K AL-KO Plug for Oil Cap 7K - 16K Part # 7600100 7600101 7600102 7600103 7600104 7600105 7600108 7600112 7600109 7600110 7600111 7600107 7600106 Ref # 295EZ 319EZ 328EZ 425EZ 482EZ 512EZ 319SS 328SS 425SS 482SS 512SS CCCP BCCP O.D. 1.986 1.986 2.450 2.450 2.720 1.957 1.986 1.986 1.986 2.440 2.450 2.450 2.720 2.720 2.720 3.125 3.250 3.355 3.625 3.625 Oil Caps Center Caps Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug WWW.TEXTRAIL.COM A-91 Fits Pilot Hole Wheel Lugs 2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125" 4 4 5 5 or 6 8 8 5 5 5 or 6 8 8 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES A = Thread Diameter B = Stud Length C =Spline Length D =Base Length E = Spline Diameter Press-In Wheel Studs Part# Ref # Description 6450565 LB169 Press-In Stud Yellow Zinc Grade 8 6450739 LB20 Press-In Stud Yellow Zinc Grade 8 6450835 LB25 Press-In Stud Silver Zinc Grade 8 7700092 363909 Press-In Stud Black Oxide Grade 8 7700095 363908 Press-In Stud Black Oxide Grade 8 7700100 108006 Press-In Stud Steel Grade 8 7700102 9251513 Press-In Stud Black Oxide Grade 8 Alko/Hayes 7700105 108007 Press-In Stud Steel Grade 8 7700106 090737 Press-In Stud Black Oxide Grade 8 D-Head Alko/Hayes 7700107 7-115 Press-In Stud Phosphate Coated Grade 8 7700108 09077115 Press-In Stud Black Oxide Grade 8 Alko/Hayes 7700109 7-122 Press-In Stud Steel Grade 8 7700112 7-132 Press-In Stud Steel Grade 8 7700123 7-223 Press-In Stud Steel Grade 8 7700133 7-246 Press-In Stud Steel Grade 8 7700142 7-262 Press-In Stud Phosphate Coated Grade 8 7700144 7-185 Press-In Stud Steel Grade 8 7700145 7-224 Press-In Stud Phosphate Coated Grade 8 7700156 7-232 Press-In Stud Phosphate Coated Grade 8 7700159 7-150 Press-In Stud Steel Grade 8 7700171 7-194 Press-In Stud Phosphate Coated Grade 8 for Steel Whls 7700184 7-195 Press-In Stud Phosphate Coated Grade 8 for Aluminum Whls 7700217 7-257 Press-In Stud Silver Zinc Grade 8 A B C D E 1/2"-20 1/2"-20 9/16"-18 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 5/8"-18 5/8"-18 3/4"-16 1/2"-20 9/16"-18 9/16"-18 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 1/2"-20 M22 x 1-1/2-6 M22 x 1-1/2-6 9/16"-18 1.1875 2.00 2.50 2.50 1.81 2.375 3.25 2.75 3.00 3.16 3.00 1.84 2.30 2.30 1.80 2.50 1.64 2.50 2.75 2.09 3.94 4.79 2.50 0.38 0.38 0.63 0.68 0.26 0.65 0.58 0.79 0.58 0.56 0.43 0.39 0.31 0.31 0.26 0.56 0.36 0.71 0.31 0.40 0.63 0.63 0.56 0.52 0.52 1.10 1.38 0.52 0.85 1.40 0.97 0.80 1.00 1.46 0.73 1.06 0.77 0.62 1.42 0.52 1.15 1.00 0.72 1.25 1.25 1.06 0.545 0.545 0.618 0.540 0.540 0.610 0.670 0.650 0.680 0.690 0.810 0.610 0.690 0.690 0.545 0.545 0.617 0.690 0.690 0.617 0.970 0.970 0.689 1 2 A = Thread Diameter B = Overall Length C =Lug Nut End Length D = Hub End Length Double Threaded Ends Screw-In Wheel Studs Part# Ref # Description A B 7700097 25-53-1 Wheel Stud Yellow Zinc Grade 8 1/2 2.00 9/16 3.06 7700090 25-11 Wheel Stud Phosphate Coated Grade 8 7700110 25-45 Wheel Stud Phosphate Coated Grade 8 5/8 2.50 9/16 & 5/8 2.94 7700111 25-59 Wheel Stud Phosphate Coated Grade 8 1/2 2.53 6450242 25-14 Rotor Stud Phosphate Coated Grade 8 3/4 2.44 7700104 25-13-1 RH Wheel Stud Phosphate Coated Grade 8 3/4 2.44 7700103 25-13-2 LH Wheel Stud Phosphate Coated Grade 8 NOTE: 25-53-1 replaces obsolete 25-53 WWW.TEXTRAIL.COM A-92 C D 0.7700 1.5625 1.3200 0.350 1.200 1.200 1.140 0.750 0.800 1.200 1.200 1.200 1/2"-20 Fine 1/2"-20 Fine 9/16"-18 Fine 9/16"-12 Coarse 5/8"-18 Fine 5/8"-11 Coarse 9/16"-18 Fine 5/8"-11 Coarse 1/2"-20 Fine 1/2"-13 Coarse 3/4"-16 Fine 3/4"-10 Coarse 3/4"-16 Fine 3/4"-10 Coarse 2010 Copyright by TexTrail, Inc. AXLES. AXLE ASSEMBLIES & BRAKES AX L E S , AX L E A S S E M B L I E S & B R A K E S A = Head Size B = Thread Length C = Thread Diameter Wheel Bolts Part# Ref # 7700008 7-40 7700295 LB509 7700120 7-84 7700006 7-36 9000025 363896 Part# Ref # 7700034 6-58 7700036 6-53 7700037 STN569 7700041 6-70-1 7700042 6-70-2 7700043 6-98 7700044 1904 Description Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc A B C Thread Type 1/2"-20 0.880 0.080 Fine 60° Cone 1/2"-20 0.875 0.813 Fine 90° Cone 9/16"-18 1.120 0.875 Fine 90° Cone 1/2"-13 1.270 0.860 Coarse Flat Head 1/2"-13 1.875 0.875 Coarse Flat Head Finish Size Grade Type Image Zinc 5/8"-18 8 Flange 5 Zinc 9/16"-18 5 60° Cone 4 Wheel Nuts 7700202 1904L 7700285 STN509 7700290 STN629 8200220 20405 Description Wheel Nut Wheel Nut Wheel Nut RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Capped Wheel Nut Acorn Hex Wheel Nut Wheel Nut LH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread RH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread Wheel Nut Wheel Nut 2-Piece Metric Acorn Duplex Hex Wheel Nut Acorn Hex Bulge 1.75" Long Wheel Nut Wheel Nut Wheel Nut Locking Wheel Nut with 3/4" Socket Key Item # Part# Ref # 3 7700148 25-56-1 3 7700149 25-56-2 4 9000139 6-47 1 7700041 6-70-1 1 7700042 6-70-2 7700046 6-69-2 7700045 6-80 7700046 6-69-2 7700047 6-69-1 7700048 6-109 7700172 6-118 7700201 3010 Zinc 9/16"-18 5 90° Cone 4 Gold Zinc 1-1/8"-16 5 Dual Whl 3 Gold Zinc 1-1/8"-16 5 Dual Whl 3 Stainless Stl 1/2"-20 5 60° Cone 2 Chrome 1/2"-20 5 60° Cone Zinc 1/2"-20 5 60° Cone 4 Yellow Zinc 3/4"-16 5 Dual Whl 6 Yellow Zinc 3/4"-16 5 Dual Whl 6 Zinc 5/8"-18 8 90° Cone 4 Hardened Alloy M22x1.5-6 5 Flange 5 Chrome 9/16"-18 5 60° Cone Chrome 1/2"-20 5 60° Cone Zinc 1/2"-20 5 90° Cone 4 Zinc 5/8"-18 5 90° Cone 4 EC 1/2"-20 8 Locking Nut 7 A 3/4"-16 3/4"-16 B 4.10 4.10 C 1.34 1.34 D 1.35 1.35 1-1/8"-16 1-1/8"-16 1-1/8"-16 1-1/8"-16 Stud Lngth 1.50 1.50 Knurl Lngth Base Lngth Knurl Dia 3.94 0.63 1.25 0.970 4.79 0.63 1.25 0.970 Heavy Duty Axle - Wheel Mounting Hardware 2 2 Item # ns 7700047 6-69-1 Part# Ref # 7030108 5-102 ns 7700172 6-118 ns 7700171 7-194 ns 7700184 7-195 Description RH Screw-In Stud Phosphate Coated Grade 8 LH Screw-In Stud Phosphate Coated Grade 8 3/4"-16 Grade C Hex Lock Nut 0.88" Width x 1.12" OD RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc RH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc Description Thread Dia 3/4" Flat Washer M22 x 1-1/2"-6 Wheel Nut 2-Piece Metric Flange Type Hardened Alloy M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Stl Whls M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Alum Whls WWW.TEXTRAIL.COM A-93 2010 Copyright by TexTrail, Inc. AX L E S , AX L E A S S E M B L I E S & B R A K E S AXLES. AXLE ASSEMBLIES & BRAKES Retaining Rings & Rim Clamps Part# Ref # Description 7700033 33-52-1 Wheel Retaining Ring for use with 5/8"-18 Nut (TT PN# 7700048) 7700160 568348 Wheel Retaining Ring for use with 5/8"-18 Nut (TT PN# 7700048) 7700058 15-2 Rim Clamp UTG & MH Style 14.5 9000152 916N Hex Nut 9/16"-18 for use with Rim Clamp Bearing Protectors Part# Ref # Description Use On 7700121 1980 Bearing Protector 1.98" with Cap 3.5K 7700121-02 1980-02 Bearing Protector 1.98" with Cap (2ea) 3.5K 7700004 2441 Bearing Protector 2.441" 5.2K 6-Bolt 7700005 2717 Bearing Protector 2.717" 5.2K-7K 8-Bolt 7700003 BB1980 Vinyl Cap for 1.980” Bearing Protector 3.5K 7700002 BB2441 Vinyl Cap for 2.441” Bearing Protector 5.2K TexTrail Packaged Wheel Parts Part# Ref # Description Qty Size Length Type 7700058-01 TTRC145 Rim Clamp UTG & MH Style 5 7700008-01 TTSD125 Screw-In Wheel Bolts 4 1/2"-20 0.88 60° Cone 7700120-01 TTSD916 Screw-In Hex Head Wheel Bolts Grade 5 Zinc 4 9/16"-18 1.12 90° Cone 7700036-01 TTWN916 Wheel Nut Grade 5 Zinc 4 9/16"-18 60° Cone 7700045-01 TTWN120 Wheel Nut Grade 5 Zinc 6 1/2"-20 60° Cone 7700048-01 TTWN580 Wheel Nut Grade 8 Zinc 4 5/8"-18 90° Cone 8200220-01 TTWL120 Locking Wheel Nut with 3/4" Socket Key EC* 1 1/2"-20 60° Cone 7700107-01 TTSD584 Press-In Wheel Stud 4 5/8"-18 3.16 7700109-01 TTSD124 Press-In Wheel Stud 4 1/2"-20 1.84 * EC Finished -24-hour salt spray tested WWW.TEXTRAIL.COM A-94 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Table of Contents - Suspensions Single Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye Tandem Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs Combination Hanger Kits 3,500 lb - 8,000 lb 2" Slipper Springs Triple Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry) 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs Heavy Duty Suspension System Air Suspension System Springs and Accessories Bushings Double Eye Springs Equalizers Hangers Marine U-Bolts Packaged U-Bolts Round U-Bolts Shackle Straps Slipper Springs Spring and U-Bolt Kits Springs Spring and U-Bolt Kits Double Eye Springs Slipper Springs Square U-Bolts Suspension Hardware Tie Bolts Tie Plates U-Bolt Hardware U-Bolt Kits WWW.TEXTRAIL.COM B-1 B-2 B-3 B-11 B-13 B-4 B-6 B-7 B-8 B-9 B-6 B-11 B-13 B-14 B-15 B-16 B-27 B-29 B-30 B-20 B-19 B-25 B-24 B-23 B-23 B-22 B-20 B-19 B-18 B-18 B-19 B-19 B-23 B-26 B-21 B-21 B-22 B-18 2010 Copyright by TexTrail, Inc. SUSPENSIONS Single Axle Double Eye Spring Hanger Kits SUSPENSIONS APS1 Item 1 2 3 4 5 Part # 9000122 9000127 9000164 9000147 9000030 APS2 Item 1 2 3 4 5 Part # 9000122 9000123 9000223 9000147 9000030 APS3 Item 1 2 3 4 5 Part # 9000122 9000123 9000164 9000147 9000030 APS4 Item 1 2 3 4 5 Part # 9000113 9000123 9000164 9000147 9000030 APS5 Item 1 2 3 4 5 Part # 9000113 9000127 9000164 9000147 9000030 9100063 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100116 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top 115052 4 Shackle Strap 2.625" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100013 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description 115917 2 Hanger 1.25" Center Hole to Top 115980 2 Rear Hanger 1.187" Center Hole to Top 115208 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100071 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100117 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” WWW.TEXTRAIL.COM B-2 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Single Axle Slipper Spring Hanger Kits Item 1 2 3 4 APS3SE 9100007 Single Axle Hanger Kits - 1.75" Slipper Springs (2K - 3.5K) Part # Ref # Qty Description 9000122 115917 2 Hanger 1.25" Center Hole to Top 9000099 115706S 2 Hanger C-Clip 9000030 7-3 2 Shackle Bolt 9/16"-18 x 3" 9000147 6-7 2 Shackle Nut 9/16"-18 APS6SE Item 1 2 3 4 Part # 9000105 9000106 9000031 9000147 9100018 Single Axle Hanger Kits - 2" Slipper Springs (2K - 8K) Ref # Qty Description 721584 2 Front Slipper Hanger 3.625" Tall 4" HD 721585 2 Rear Slipper Hanger 5" Tall 7-17 4 Shackle Bolt 9/16"-18 x 3.5" 6-7 4 Shackle Nut 9/16"-18 WWW.TEXTRAIL.COM B-3 2010 Copyright by TexTrail, Inc. SUSPENSIONS Tandem Axle Double Eye Spring Hanger Kits SUSPENSIONS APT1 Item 1&3 2 4 5 6 7 Part # 9000128 9000129 9000088 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT3 Item 1&3 2 4 5 6 7 Item 1&3 2 4 5 6 7 Part # 9000128 9000122 9000090 9000223 9000030 9000147 9100064 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQR83 2 Equalizer 8" Straight; 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100041 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 2 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR07F 4 Hanger 1.25" Center Hole to Top E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut APT3-HD 9100043 Tandem Axle Heavy Duty Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Part # Ref # Qty Description 9000128 HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL 9000129 HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt 9000089 EQE34 2 Equalizer 7.75" Straight; 3/4" Center; 9/16" End Holes 9000223 SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 9000030 7-3 12 9/16"-18 x 3" Long Shackle Bolt 9000147 6-7 12 9/16"-18 Shackle Bolt Lock Nut 9000004 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 9000140 165093 2 3/4"-16 Equalizer Castle Nut 9000132 1610 2 Grease Zerk 1/8"-27 MPT 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long WWW.TEXTRAIL.COM B-4 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Tandem Axle Double Eye Spring Hanger Kits APT4 Item 1&3 2 4 5 6 7 Part # 9000128 9000129 9000067 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT5 Item 1-3 4 5 6 7 Part # 9000113 9000090 9000223 9000030 9000147 APT5-LE Item 1-3 5 6 7 Part # 9000113 9000164 9000030 9000147 APT5-AS Item 1-3 4 5 6 7 Part # 9000113 9000090 9000163 9000030 9000147 9100060 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQ458 2 Equalizer 6.25" Radius 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100061 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-03 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall SL04B 8 Shackle Strap 3.125" Center Hole x 1.25" Wide 4.405" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-04 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL02B 8 Shackle Strap 2.25" Center Hole x 1.25" Wide 3.530" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut WWW.TEXTRAIL.COM B-5 2010 Copyright by TexTrail, Inc. SUSPENSIONS Tandem Axle Slipper Spring Hanger Kits SUSPENSIONS Item 1 2 3 4 5 6 7 8 ns APT6SE-LD 9100073-03 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Boxed Kit Part # Ref # Qty Description 9000105-02 HR25F 2 Front Slipper Hanger 3.625" Tall 9000106-02 HR26W 2 Rear Slipper Hanger 5" Tall 9000100-02 HR27F 2 Center Slipper Hanger 3.38" Tall 9000272 E4541 2 Equalizer 2" Wide X 12" Long 9000031 717 8 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 8 9/16"-18 Shackle Bolt Lock Nut 9000017 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 9000146 6-3 2 7/8"-9 Castle Nut 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long Item 1 2 3 4 5 6 7 8 ns APT6SE-MD 9100020 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Boxed Kit Part # Ref # Qty Description 9000105 721584 2 Front Slipper Hanger 3.625" Tall 9000106 721585 2 Rear Slipper Hanger 5" Tall 9000100 721586 2 Center Slipper Hanger 3.38" Tall 9000272 E4541 2 Equalizer 2" Wide X 12" Long 9000031 717 8 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 8 9/16"-18 Shackle Bolt Lock Nut 9000017 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 9000146 6-3 2 7/8"-9 Castle Nut 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long APT6SE-HD Item 1 2 3 4 5 6 7 8 ns Part # 9000105 9000106 9000100 9000070 9000031 9000147 9000017 9000146 8750003 9100020-02 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Bulk Kit Ref # Qty Description 721584 2 Front Slipper Hanger 3.625" Tall 721585 2 Rear Slipper Hanger 5" Tall 721586 2 Center Slipper Hanger 3.38" Tall E5541 2 Equalizer 2" Wide X 12" Long 717 8 9/16"-18 x 3.5" Shackle Bolt 6-7 8 9/16"-18 Shackle Bolt Lock Nut 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 6-3 2 7/8"-9 Castle Nut 19-2 2 Cotter Pin 1/8" x 1.75" Long WWW.TEXTRAIL.COM B-6 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Combination Slipper Spring Hanger Kits H202-AP202 Part # 9000291 9000290 9000292 9000094 9000020 9000143 9000031 9000147 9000016 9000145 9100119 Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16" 13-4 2 Equalizer Bullnose 33.5" Axle Spacing with Center Bushing 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 6-11 4 5/16"-18 Spring Retainer Nut 7-17 4 9/16"-18 x 3.5" Shackle Bolt 6-7 4 9/16"-18 Shackle Bolt Lock Nut 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 6-111 2 7/8"-9 Castle Nut Part # 9000291 9000290 9000292 HGR-202* Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 7K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16" Item 1 2 3 Part # 9000119 9000170 9000121 HRG-238* Tandem Axle Hanger Kit - 2" Slipper Springs (7.2K - 8K) Ref # Qty Description 28-9-1 2 Front Slipper Hanger 5" Top to Center Hole 29-5-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-6-1 2 Rear Slipper Hanger 6.38" Top to Center Hole Item 4 5 6 7 8 9 10 A/P-202* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing Part # Ref # Qty Description 9000094 13-4 2 Equalizer Bullnose 13.125" OAL with Center Bushing 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut Item 1 2 3 4 5 6 7 8 9 10 Item 1 2 3 Item 4 5 6 7 8 9 10 A/P-216* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing Part # Ref # Qty Description 9000092 13-44 2 Equalizer Bullnose 13.125" OAL with Center Bushing & Slipper Pad 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut * HGR-202 or HGR 238 is to be used with A/P-202 or A/P-216 for a complete Hanger Kit WWW.TEXTRAIL.COM B-7 2010 Copyright by TexTrail, Inc. SUSPENSIONS Triple Axle Double Eye Spring Hanger Kits SUSPENSIONS APTT3 Item 1 2 3 4 5 6 Part # 9000090 9000113 9000122 9000223 9000030 9000147 APTT5 Item 1 2-3 4 5 6 Part # 9000090 9000113 9000164 9000030 9000147 9100016 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 4 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes HR07F 4 Hanger 1.25" Top to Center Hole 2.010" Tall 9/16" Holes SL16B 16 Shackle Strap 2.625" Hole Centers 3.905" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut 9100017 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 8 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes SL04B 16 Shackle Strap 3.125" Hole Centers 4.405" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut WWW.TEXTRAIL.COM B-8 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Triple Axle Slipper Spring Hanger Kits APTT6SE-LD Item 1 2 3 4 5 6 7 8 ns Part # 9000272 9000105-02 9000106-02 9000100-02 9000017 9000146 9000031 9000147 8750003 9100021-04 Light Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Ref # E4541 HR25F HR26W HR27F 7845B 6-3 7-17 6-7 19-2 Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long APTT6SE-MD 9100021-03 Medium Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item 1 2 3 4 5 6 7 8 ns Part # 9000272 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003 Ref # E4541 721584 721585 721586 7845B 6-3 7-17 6-7 19-2 Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long APTT6SE-HD 9100021 Heavy Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item 1 2 3 4 5 6 7 8 ns Part # 9000070 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003 Ref # E5541 721584 721585 721586 7845B 6-3 7-17 6-7 19-2 WWW.TEXTRAIL.COM Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2" W x 12"L Heavy Duty Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long B-9 2010 Copyright by TexTrail, Inc. SUSPENSIONS 3.5K - 8K 2” Slipper Spring Hanger Kits SUSPENSIONS HGR-302* Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item Part # Ref # Qty Description 1 9000291 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole x 2" Wide 2 9000290 29-1 4 Center Slipper Hanger 4.50" Tall 3.50" Top to Center Hole x 2" Wide 3 9000292 30-28 2 Rear Slipper Hanger 5.72" Tall 525" Top to Center Hole x 2" Wide A/P-302* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing Item Part # Ref # Qty Description 4 9000094 13-4 4 Equalizer Bullnose 13.125" OAL with Center Bushing 5 9000031 7-17 6 9/16"-18 x 3.5" Shackle Bolt 6 9000147 6-7 6 9/16"-18 Shackle Bolt Lock Nut 7 9000016 7-1-1 4 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole 8 9000145 6-111 4 7/8"-9 Grade B Castle Nut 9 9000020 7-7 6 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 10 9000143 6-11 6 5/16"-18 Spring Retainer Nut A/P-316* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing Item Part # Ref # Qty Description 4 9000092 13-44 4 Equalizer Bullnose 13.125" OAL with Central Bushing & Slipper Pad 5 9000031 7-17 6 9/16"-18 x 3.5" Shackle Bolt 6 9000147 6-7 6 9/16"-18 Shackle Bolt Lock Nut 7 9000016 7-1-1 4 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole 8 9000145 6-111 4 7/8"-9 Grade B Castle Nut 9 9000020 7-7 6 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 10 9000143 6-11 6 5/16"-18 Spring Retainer Nut * HGR-302 is to be used with A/P-302 or A/P-316 for a complete Hanger Kit WWW.TEXTRAIL.COM B-10 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS 9K 2” Slipper Spring Hanger Kits HAP-105-00 Item 1 2 5 6 ns ns Part # 9000120 9000118 9000021 9000020 9000144 9000143 9100011 Single Axle Hanger Kit - 2" Slipper Springs (9K) Ref # 28-68-4 30-68-1 7-181 7-7 6-38 6-11 Qty 2 2 2 2 2 2 Description Front Hanger 5" Tall Rear Hanger 4.85" Tall 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut HAP-205-01 9100008 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 38" Axle Spacing Item 3 4 5 6 7 ns ns ns Part # 9000117 9000072 9000021 9000020 9000019 9000144 9000143 9000136 Ref # 29-39-4 13-117-3 7-181 7-7 7-182 6-38 6-11 6-112 WWW.TEXTRAIL.COM Qty 2 2 2 2 2 2 2 2 Description Center Hanger 4.5" Tall Equalizer 2" Slipper Spring 38" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut B-11 2010 Copyright by TexTrail, Inc. SUSPENSIONS 9K 2” Slipper Spring Hanger Kits Continued SUSPENSIONS HAP-205-02 Item 3 4 5 6 7 ns ns ns Part # 9000117 9000071 9000021 9000020 9000019 9000144 9000143 9000136 Ref # 29-39-4 13-118-3 7-181 7-7 7-182 6-38 6-11 6-112 HAP-205-03 Item 3 4 5 6 7 ns ns ns Part # 9000117 9000073 9000021 9000020 9000019 9000144 9000143 9000136 9100009 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 42.25" Axle Spacing Qty 2 2 2 2 2 2 2 2 Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut 9100010 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 48.50" Axle Spacing Ref # 29-39-4 13-119-3 7-181 7-7 7-182 6-38 6-11 6-112 Qty 2 2 2 2 2 2 2 2 Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut 9K Axle Assembly Spacing Single Tandem Triple 38” (1) 9100011 (1) 9100011 (1) 9100008 (1) 9100011 (2) 9100008 WWW.TEXTRAIL.COM 42.25" (1) 9100011 (1) 9100011 (1) 9100009 (1) 9100011 (2) 9100009 B-12 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS 10K GD 2-1/2” Slipper Spring Hanger Kits (7/8” Eye) HAP-157-00 9100065 Single Axle Hanger Kit - 2-1/2" Slipper Springs 7/8" Eye Bolts (10K GD) Item 1 1 2 5 ns Part # 9000265 9000264 9100072-02 9000034 9000145 Ref # 28-72-1 28-73-1 30-61-1 7-260-2 6-111 Qty 1 1 2 2 2 Description Left Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Right Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Rear Hanger 5-1/2" Tall 5/16" Bolt Hole 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut HAP-257-01 9100070 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing Item 3 4 4 5 ns 6 ns Part # 9000108 9000266 9000267 9000034 9000145 9000009 9000136 Ref # 29-33 13-132-2 13-132-2 7-260-2 6-111 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut HAP-257-02 9100069 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Item 3 4 4 5 ns 6 ns Part # 9000108 9000268 9000267 9000034 9000145 9000009 9000136 Ref # 29-33 13-134-2 13-135-2 7-260-2 6-111 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut HAP-257-03 9100066 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing Item 3 4 4 5 ns 6 ns Part # 9000108 9000270 9000271 9000034 9000145 9000009 9000136 Ref # 29-33 13-136-2 13-137-2 7-260-2 6-111 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut 10K General Duty Axle Assembly Spacing Single Tandem Triple 38” (1) 9100065 (1) 9100065 (1) 9100070 (1) 9100065 (2) 9100070 42.25” (1) 9100065 (1) 9100065 (1) 9100069 (1) 9100065 (2) 9100069 48.50” (1) 9100065 (1) 9100065 (1) 9100066 (1) 9100065 (2) 9100066 WWW.TEXTRAIL.COM B-13 2010 Copyright by TexTrail, Inc. SUSPENSIONS Wet - 10K GD 2-1/2” Slipper Spring Hanger Kits (3/4” Eye) SUSPENSIONS HAP-158-00 (WET) 9100121 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD) Item Part # Ref # Qty 1 1 Description 9000281 HR32FL 1 LH Front Hanger 4.50" Tall 3/4" Eye Bolt Hole 9000288 HR32FR 1 RH Front Hanger 4.50" Tall 3/4" Eye Bolt Hole 2 9000283 HR31W 2 Rear Hanger 4.50" Tall 5 9000010 7-135-2 2 3/4"-10 x 4.5" Spring Eye Bolt with Grease Zerk ns 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut HAP-258-02 (WET) 9100122 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Item Part # Ref # Qty Description 3 9000286 HR33F 2 Center Hanger 5.875" Tall 1" Eye Hole 4 9000383 EQ05LW 1 LH Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 9000384 EQ05RW 1 RH Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 5 9000010 7-135-2 2 3/4"-10 x 4.5" Spring Eye Bolt with Grease Zerk ns 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 6 9000009 7-136-2 2 1"-8 x 5.25" Grade 5 Equalizer Bolt with Grease Zerk ns 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut 10K General Duty Axle Assembly Spacing 38” 42.25" Single Wet - (1) 9100121 Tandem Wet - (1) 9100122 WWW.TEXTRAIL.COM B-14 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS Dry - 10K GD 2-1/2” Slipper Spring Hanger Kits (3/4” Eye) HAPD-158-00 (DRY) 9100072 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD) Item 1 2 5 ns Part # 9100072-03 9100072-02 9000280 9000138 Ref # 28-74-2 30-61-1 7-264 6-113 Qty 2 2 2 2 Description Front Hanger 5.25" Tall 3/4" Eye Bolt Hole Rear Hanger 5.5" Tall 5/16" Bolt Hole 3/4"-10 x 4.5" Spring Eye Bolt 3/4"-10 Grade B Spring Eye Hex Lock Nut HAP-258-01 (DRY) 9100089 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing Item 3 4 5 ns 6 ns Item 3 4 5 ns 6 ns Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100089-02 13-139-3 2 Equalizer 2.50" Slipper Spring 38" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut HAPD-258-02 (DRY) 9100090 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100090-02 13-140-3 2 Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut HAP-258-03 (DRY) 9100091 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing Item 3 4 5 ns 6 ns Part # 9100089-03 9100091-02 9000280 9000138 9000013 9000136 Ref # 29-42-2 13-141-3 7-264 6-113 7-169 6-112 38” (1) 9100072 (1) 9100072 (1) 9100089 (1) 9100072 (2) 9100089 42.25” (1) 9100072 (1) 9100072 (1) 9100090 (1) 9100072 (2) 9100090 Qty 2 2 2 2 2 2 Description Center Hanger 4.50" Tall Equalizer 2.50" Slipper Spring 48.5" Spacing 3/4" Bolt 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 3/4"-10 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 1"-8 Grade B Equalizer Hex Lock Nut 10K General Duty Axle Assembly Spacing Single Tandem Triple WWW.TEXTRAIL.COM 48.50” (1) 9100072 (1) 9100072 (1) 9100091 (1) 9100072 (2) 9100091 B-15 2010 Copyright by TexTrail, Inc. SUSPENSIONS 10K HD - 15K 3” Slipper Spring Hanger Kits SUSPENSIONS HAP-103-00 Item 1 2 5 ns 6 ns Item 3 4 5 ns 6 ns 7 ns Item 3 4 5 ns 6 ns 7 ns Part # 9000112 9000111 9000014 9000137 9000013 9000136 9100012 Single Axle Hanger Kit - 3" Slipper Springs (10K - 15K) Ref # Qty Description 28-67-4 2 Front Hanger 6.25" Tall 30-66-1 2 Rear Hanger 6.63" Tall 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 7-169 2 1"-8 x 5.5" Spring Eye Bolt 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut HAP-203-01 9100006 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 38" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000083* 13-107-7 2 Equalizer 3" Slipper Spring 38" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut HAP-203-02 9100055 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 42.25" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000082* 13-108-3 2 Equalizer 3" Slipper Spring 42.25" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut WWW.TEXTRAIL.COM B-16 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS 10K HD - 15K 3” Slipper Spring Hanger Kits Continued Item 3 4 5 ns 6 ns 7 ns HAP-203-03 9100005 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 48.50" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000085* 13-109-3 2 Equalizer 3" Slipper Spring 48.50" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut * Check with sales representative about product details on left or right hand application. 10K - 15K Axle Assembly Spacing 38" 42.25” 48.50” Single (1) 9100012 (1) 9100012 (1) 9100012 Tandem (1) 9100012 (1) 9100012 (1) 9100012 (1) 9100006 (1) 9100055 (1) 9100005 Triple (1) 9100012 (1) 9100012 (1) 9100012 (2) 9100006 (2) 9100055 (2) 9100005 WWW.TEXTRAIL.COM B-17 2010 Copyright by TexTrail, Inc. SUSPENSIONS Spring Kits with U-Bolts and U-Bolt Kits SUSPENSIONS Spring and U-Bolt Kits Part # Ref # Capacity Length Leafs U-Bolt Kit 9150014-02 2-SW4B 1,750 25-1/4" 4 9100045 APUBR1 Axle Beam Description Type 9150018-02 2-SW5 2,950 25-1/4" 5 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Double-Eye Spring 9150021-02 2-SW6 3,500 25-1/4" 6 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Double-Eye Spring 2-3/8" Round 2-each Springs with U-Bolt Kit Double-Eye Spring 9150031-02 2-WIE3 750 24-1/4" 3 9100045 APUBR1 2-3/8" Round 2-each Springs with U-Bolt Kit 9150076-02 2-803T3 2,000 26-1/2" 4 9100045 APUBR1 2-3/8" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150022-02 2-HW5116 3,750 26-1/2" 6 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150000-02 2-1203T3 3,500 26" 5 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150076-03 2-803T3/3 2,000 26-1/2" 4 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150020-02 2-E5226 3,400 26-1/2" 5 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150034-02 2-1403T3 4,000 26-1/8" 7 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150024-02 2-E5115 4,000 29-1/2" 6 9100047 APUBR2 3" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150024-03 2-E5115 4,000 29-1/2" 6 9100050 APUBR35 3-1/2" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150030-02 2-72-44-1 6,000 30-1/2" 6 9100097 1015KUB 5" Round 2-each Springs with U-Bolt Kit Slipper Spring 9150001-02 2-72-10 4,500 30" 6 - - 4" Round 2-each Springs with U-Bolt Kit Slipper Spring Slipper Spring Round U-Bolt Kits for 1- Axle Part # Ref # DIA Length Use with 9100052-01 TTUBKR2K 3/8" 4" 1-3/4" U-Bolt Kit for 2K Round Axle Tubes 9100045-01 TTUBKR3K 1/2" 5-1/2" 2-3/8" U-Bolt Kit for 3.5K Round Axle Tubes 9100047-01 TTUBKR6K 3" 9100158 1/2" 7" 7/16” 5.13” 7-1/2" 9100048-01 TTUBKR61K 9/16" Part # Ref # DIA 9100052 APUBR10 9100045 APUBR1 9100047 APUBR8 9100050 Part # Description U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes 3" U-Bolt Kit for 5.2K - 7K Round Axle Tubes Round U-Bolt Kits for 1- Axle Length Use with Description 3/8" 4" 1-3/4" 1/2" 5-1/2" 2-3/8" 1/2" 7" 3" APUBR35 9/16" 7-3/4" 3-1/2" Ref # DIA Length Use with 9000244-01 TTPUBR3K 3/8" 5-1/2" 2-3/8" 9000225-01 TTPUBR61K 1/2" 7" 3" U-Bolt Kit for 5.2K - 6K Round Axle Tubes 9000245-01 TTPUBR6K 9/16" 7-1/2" 3" U-Bolt Kit for 5.2K - 6K Round Axle Tubes 9000242-01 TTPUBS3K 9/16" 5-1/2" 2" U-Bolt Kit for 2K - 3.5K Square Axle Tubes 9000239-01 TTPUBS2K 9/16" 5" 1-3/4" Part # Ref # DIA Length Use with 9100046 APUB9 9/16" 5-1/2" 2" 9100054 APUB6 9/16" 5-1/2" 1-3/4" U-Bolt Kit for 2K - 3.5K Square Axle Tubes 9100042 APUB3 9/16" 5" 1-3/4" U-Bolt Kit for 2K - 3.5K Square Axle Tubes 9100053 APUB3 3/8" 4-1/2" 1-3/4" U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 8K Round Axle Tubes Packaged U-Bolts (2-each) Description U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 2K Square Axle Tubes Square U-Bolt (Bulk) Kits for 1- Axle WWW.TEXTRAIL.COM Description U-Bolt Kit for 2K - 3.5K Square Axle Tubes B-18 2010 Copyright by TexTrail, Inc. SUSPENSIONS When selecting a replacement spring ensure that you get the measurements as indicated on the illustration for that spring type. Worn springs may represent a longer measurement than actually required in your new spring selection. Your TexTrail Sales Representative is available to assist you in your selection of replacement springs. SUSPENSIONS SPRINGS Double-Eye Springs Part # 9150006 9150071 9150049 9150057 9150064 9150012 9150072 9150013 9150014 9150016 9150018 9150019 9150021 9150051 9150073 9150017 9150010 9150023 Ref # 1020 72-16 72-13 72-9 72-18 93180 75-6 SW3 SW4B SW4 SW5 72-40 SW6 72-25 SW722 SW626 SW427 SW627 Capacity 1,000 850 1,400 1,750 2,000 1,750 1,250 1,750 1,750 2,500 2,900 3,000 3,500 2,500 1,250 2,700 1,500 3,800 Leafs 3 3 4 3 4 3 3 3 4 4 5 1 6 4 3 6 4 6 A 20-3/8" 20-1/4" 20-1/2" 23-1/8" 23-1/8" 23-1/4" 23-1/8" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 24-7/8" 26" 25-1/8" 26-1/8" 27" 26-1/8" B 3-3/6" 3-3/16" 3-5/16" 3-1/2" 3-1/2" 3-1/8" 3-5/8" 3" 3" 3" 3" 3" 3" 3" 3-3/16" 3-3/4" 2-3/4" 3-3/4" Part # 9150007 9150025 9150031 9150009 9150070 9150065 9150011 9150015 9150074 9150000 9150076 9150020 9150022 9150035 9150034 9150036 9150038 9150024 9150026 9150001 9150059 9150027 9150033 9150046 9150029 9150028 9150030 9150032 9150008 Ref # WH4 WIC2 WIE3 WI5 72-2 WID2 WIF3 WIG4 1003T3 1203T3 803T3 E5226 HW5116 93165 1403T3 72-51-1 72-51-2 E5115 E8536 72-10 72-10-2 72-21 72-80-1 72-77 93161A 72-43-1 72-44-1 72-45-1 354-00 Capacity 1,000 500 750 1,300 1,000 1,000 1,500 2,000 2,500 3,500 2,000 3,400 3,750 4,000 4,000 4,000 4,000 4,000 5,300 4,500 4,500 5,000 5,000 5,000 5,000 5,000 6,000 7,500 11,000 Leafs 4 2 3 5 2 2 3 4 4 5 4 5 6 7 7 7 7 6 8 6 6 5 5 5 5 5 6 7 3 A 24-1/4" 24-1/4" 24-1/4" 24-1/4" 27-1/2" 30-1/4" 30-1/4" 30-1/4" 27-3/4" 26-3/8" 26-1/2" 26-5/8" 26-1/2" 26-1/4" 26-1/8" 26-7/8" 26-7/8" 29-1/2" 29-1/2" 30" 30" 29-3/4" 29-3/4" 30" 32-1/2" 30-1/4" 30-1/4" 30-1/4" 43-3/4" B 23-1/8" 23-1/8" 23-1/8" 23-1/8" 24-3/4" 27-3/8" 27-3/8" 27-3/8" 24-7/8" 24-7/8" 24-7/8" 25-1/4" 25-1/8" 22-3/4" 24-7/8" 23-3/8" 23-3/8" 27-1/2" 27-1/2" 26-7/8" 26-7/8" 26-1/4" 26-1/4" 26-7/8" 29" 26-3/4" 26-3/4" 26-3/4" 40-5/8" C 10-3/16" 10-1/4" 10-1/4" 11-9/16" 11-9/16" 11-5/8" 11-9/16" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-9/16" 13-1/16" 13-1/2" 13-1/16" Eye Bolt 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" Description 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring for Mobile Home Use 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring Slipper Springs WWW.TEXTRAIL.COM C 4-1/8" 4" 4" 4-1/8" 4-3/16" 4-1/2" 4-1/2" 4-1/2" 3-1/16" 3-3/16" 3" 3-1/2" 3-1/2" 3" 3" 3" 3" 3-1/2" 3-1/8" 3-7/8" 3-7/8" 4" 4" 4" 4" 4" 4" 4" 3-3/16" D 11-1/16" 11" 11" 11-1/8" 12-7/16" 13-1/2" 13-1/2" 13-1/2" 11-3/16" 11-1/8" 11-3/16" 12" 12" 11-3/16" 11-3/16" 11-1/8" 11-1/8" 13-1/2" 13-1/2" 13-1/8" 13-1/8" 13-1/2" 13-1/2" 13-1/2" 14" 13-3/8" 13-3/8" 13-3/8" 22-1/2" B-19 Width 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3" Description Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 5/8" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring Slipper Spring with 5/8" Steel Cased Rubber Bushing Slipper Spring 3/4" Eye Slipper Spring with 3/4" Rubber Eye Bushing Slipper Spring with 7/8" Brass Eye Bushing Slipper Spring with 3/4" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing High Arch Slipper Spring 2010 Copyright by TexTrail, Inc. SUSPENSIONS Suspension Bushings & Shackle Straps SUSPENSIONS Part # Ref # 9000049 14-51 9000042 14-67 9000273 14-111 9000052 71-291 9000045 721590 9000044 14-70 9000053 722109 9000038 14-1-1 9000039 14-64-1 9000054 722108 9000051 ENP605 9000040 14-54-1 9000043 14-69 9000055 091414 9000295 14-112 9000047 091413 9000041 14-73 9000038-01 TTBK100 9000039-01 TTBK200 9000054-01 TTBK300 Part # Ref # 9000162 18-24-1 9000163 18-11 9000223 115052 9000164 115208 9000163-01 TTSK225 9000223-01 TTSK262 9000164-01 TTSK312 ID 1" 3/4" 7/8" 9/16" 7/8" 1-1/8" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16" 1" 1" 3/4" 3/4" 5/8" 9/16" 9/16" 9/16" Suspension Bushings OD Length Description 1.25" 3" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 11/16" 1-3/4" Bronze Equalizer / Spring Eye Bushing 1-1/16" 2-15/16" Nylon Equalizer Bushing 2-1/8" 3-3/4" Rubber / Steel Equalizer Bushing 7/8" 1-3/4" Nylon Equalizer Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing 11/16" 2" Nylon Spring Eye Bushing 3/4" 1-3/4" Nylon Equalizer Bushing 7/8" 1-3/4" Nylon Spring Eye Bushing 1-5/16" 2-3/16" Nylon Spring Eye Bushing 2-1/16" 2-1/8" Rubber / Steel Sleeve Spring Eye Bushing 2-1/8" 4-1/16" Rubber / Steel Sleeve Equalizer Bushing 2" 2-5/8" Rubber / Steel Insert Spring Eye Bushing 1-3/4" 2-3/4" Rubber / Steel Sleeve Spring Eye Bushing 1-3/8" 2-3/16" Rubber / Steel Sleeve Spring Eye Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing Kit (8-each) 11/16" 2" Nylon Spring Eye Bushing Kit (8-each) 3/4" 1-3/4" Nylon Equalizer Bushings Kit (6-each) HC 2-1/4" 2-1/4" 2-5/8" 3-1/8" 2-1/4" 2-5/8" 3-1/8" Shackle Straps Length Hole Size Description 3-3/4" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap 3-7/8" 9/16" Shackle Strap 4-3/8" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap Kit (4-each) 3-7/8" 9/16" Shackle Strap Kit (4-each) 4-3/8" 9/16" Shackle Strap Kit (4-each) WWW.TEXTRAIL.COM B-20 2010 Copyright by TexTrail, Inc. SUSPENSIONS SUSPENSIONS U-Bolt Axle Tie Plates and Bolts Square U-Bolt Axle Tie Plates Part # 9000203 9000205 9000208 9000209 Ref # 115983 116308 115585 117594 Use with Axle 1-1/2" 1-3/4" 2" 2" Spring 1-3/4" 1-3/4" 1-3/4" 1-3/4" or 2" - Thickness 0.25" U-Bolt Size 1/2" 9/16" 9/16" 9/16" Description Tie Plate Tie Plate Tie Plate Tie Plate Round U-Bolt Axle Tie Plates Part # 9000204 9000206 9000207 9000297 9000299 9000212-02 9000212 9000210 9000213 9000214 9000215 9000216 9000217 Ref # 117535 177858 117595 12-4 12-1-2 12-1 117521 117581 12-42 12-49 12-53 12-46 Use with Axle 1-3/4" 2-1/2" 2-3/8" 2-3/8" 2-3/8” 3" 3" 3" 3-1/2" 4" 5" 5" 5" Spring Thickness 1-3/4" 0.25" 2" 1-3/4" 0.25" 2" 0.25" 2” 0.25” 1-3/4" 0.19" 1-3/4" 0.25" 1-3/4"-2" 0.25" 1-3/4"-2" 0.38" 2" 0.31" 2-1/2" 0.25" 3" 0.25" 3" 0.25" * Dexter Axle ** ALKO / Hayes Axle U-Bolt Size 3/8" 9/16" 1/2" 1/2" 7/16” 1/2" 1/2" 1/2" or 9/16" 9/16" or 5/8" 5/8" 5/8" 5/8" 3/4" Description 2K Straight Tie Plate 7.2K Tie Plate 2K Drop / 3.5K Tie Plate 3.5K - 4.4K Tie Plate 3.5K - 7.2K Tie Plate 3.5K -7.2K Zinc Tie Plate 3.5K -7.2K Tie Plate 3.5KHD - 7K Tie Plate 8K Tie Plate 9K Tie Plate 10K GD* / 10K** Tie Plate 10K HD* Tie Plate 12K - 15K* Tie Plate Spring Center Tie Bolts Part # 9000192 9000195 9000196 9000197 9000198 9000199 9000200 9000201 9000202 6450182 9000143 9000137 6450181 Ref # BC12 BC3835 BC385 BC386 BC51635 BC5165 BC5166 BC7164 BC7166 BC38 BC516 BC12N BC716 Size 1/2" 3/8" 3/8" 3/8" 5/16" 5/16" 5/16" 7/16" 7/16" 3/8" 5/16" 1/2" 7/16" WWW.TEXTRAIL.COM Length 5" 3-1/2" 5" 6" 3-1/2" 5" 6" 4" 6" Description Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Nut for 3/8" Tie Bolt Nut for 5/16" Tie Bolt Nut for 1/2" Tie Bolt Nut for 7/16" Tie Bolt B-21 2010 Copyright by TexTrail, Inc. SUSPENSIONS Round U-Bolts & U-Bolt Hardware Part # 9000228 9000244 9000222 9000231 9000225 9000245 9000240 9000232 9000229 9000227 9000230 9000248 Ref # 11-54 11-21 11-22 11-74 11-18 176500 175667 11-65 11-64 11-70 11-77 091148 DIA 3/8" 1/2" 1/2" 7/16" 1/2" 9/16" 5/8" 9/16" 5/8" 3/4" 5/8" 5/8" Length 4" 5-1/2" 6-1/4" 5-1/8" 7-1/16" 7-1/2" 9" 7-13/16" 8-13/32" 9-5/8" 8-15/16" 10-1/2" Part # 9100052-01 9100045-01 9100047-01 9100048-01 Ref # TTUBKR2K TTUBKR3K TTUBKR6K TTUBKR61K DIA 3/8" 1/2" 1/2" 9/16" Length 4" 5-1/2" 7" 7-1/2" Part # 9100052 9100045 9100047 9100048 9100050 Ref # APUBR10 APUBR1 APUBR8 APUBR9 APUBR35 DIA 3/8" 1/2" 1/2" 9/16" 9/16" Part # 9000250 6450182 6450181 7030116 9000153 9000251 7700181 9000137 9000152 9000252 9000144 7030118 9000138 7030109 Ref # 33621 36156 36358 76124 12FHNP 12LWP 12FHFNP 6-129 916FHNP 916LWP 6-38 33630 6-113 76128 DIA 3/8" 3/8" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 5/8" 5/8" 3/4" 3/4" Use with 1-3/4" 2-3/8" 2-3/8" 2-3/8" 3" 3" 3-1/2" 3-1/2" 4" 5" 5" 5" Description U-Bolt for 2K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 9K Round Axle Tubes U-Bolt for 12K & 15K Round Axle Tubes U-Bolt for 10K Round Axle Tubes (Dexter) U-Bolt for 10K Round Axle Tubes (Hayes/AL-KO) Round U-Bolt Kits for 1- Axle Use with 1-3/4" 2-3/8" 3" 3" Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes Round U-Bolt Kits for 1- Axle (Bulk) Length 4" 5-1/2" 7" 7-1/2" 7-3/4" Use with 1-3/4" 2-3/8" 3" 3" 3-1/2" Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 8K Round Axle Tubes U-Bolt Hardware WWW.TEXTRAIL.COM Description U-Bolt Lock Washer U-Bolt Nut U-Bolt Hex Nut U-Bolt Lock Washer U-Bolt Nut U-Bolt Lock Washer U-Bolt Flange Hex Nut U-Bolt Lock Nut U-Bolt Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer B-22 2010 Copyright by TexTrail, Inc. SUSPENSIONS Round U-Bolts SUSPENSIONS Square Axle U-Bolts, Marine U-Bolts & Packaged U-Bolts SUSPENSIONS 8270007 Double U-Bolt Bracket Stainless Steel, Galvanized & Yellow Zinc Plated Marine U-Bolts Part # 9000507 9000508 9000509 9000501 9000502 9000503 9000504 9000289 9000510 9000505 9000506 9000511 9000500 7030202 7030199 7030203 7030204 7030069 7030062 Part # 8270007 8270008 Ref # US1201405S US1201505S US1201605S US1201405G US1201505G US1201605G US1301405G UB345120SS US1301505S US1301505G US1301605G UB337812SS US1301405Y 12CHN188SS 12LW188SS 12CHNG 12LWHDG 12CHNYZ 12LWYZ Ref # 10190G 10191G DIA 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Height 8-3/4" 9-3/4" Length 4-5/16" 5-5/16" 6-5/16" 4-5/16" 5-5/16" 6-5/16" 4-5/16 4-1/2" 5-5/16" 5-5/16" 6-5/16" 3-7/8" 4-5/16" Part # 9000244-01 9000225-01 9000245-01 9000242-01 9000239-01 Ref # TTPUBR3K TTPUBR61K TTPUBR6K TTPUBS3K TTPUBS2K DIA 3/8" 1/2" 9/16" 9/16" 9/16" Length 5-1/2" 7" 7-1/2" 5-1/2" 5" Width 4" 4" Use with 2" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3" Description Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Yellow Zinc Square U-Bolt Yellow Zinc Square U-Bolt Stainless Steel Hex Nut Stainless Steel Lock Washer Galvanized Hex Nut Galvanized Lock Washer Yellow Zinc Hex Nut Yellow Zinc Lock Washer Description Galvanized Double U-Bolt Bracket Galvanized Double U-Bolt Bracket Packaged U-Bolts (2-each) Use with 2-3/8" 3" 3" 2" 1-3/4" Description U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 6K Round Axle Tubes U-Bolt Kit for 5.2K - 6K Round Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K Square Axle Tubes Square U-Bolt (Bulk) Kits for 1- Axle Part # 9100046 9100054 9100042 9100053 Ref # APUB9 APUB6 APUB3 APUB3 DIA 9/16" 9/16" 9/16" 3/8" Length 5-1/2" 5-1/2" 5" 4-1/2" Use with 2" 1-3/4" 1-3/4" 1-3/4" Description U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes Part # 9000239 9000005 9000246 9000242 9000243 9000289 Ref # 175130LN 4215-1ZP DIA 9/16" 3/8" 7/16" 9/16" 9/16" 1/2" Length Use with Description 5" 1-3/4" Steel U-Bolt for 2K Square Axle Tube 3-1/2" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 4-1/4" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 5-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 6-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 4-1/2" 3" Stainless Steel U-Bolt for 5.2K - 6K Square Axle Tube Square U-Bolt Hardware See previous page Square U-Bolts 4203-1 4206-1L UB345120SS WWW.TEXTRAIL.COM B-23 2010 Copyright by TexTrail, Inc. SUSPENSIONS Hangers Top to Hole Center 3-1/4" 4-1/4" 1-1/4" 2-29/64" 5-3/8" 1-1/8" 29/32" 3.25" 4.25" 1.25" 2.45" 5.38" 1.13" 0.91" Bolt Size 9/16" 9/16" 9/16" 9/16" 3/4" 9/16" 9/16" Height 3-5/8" 4-7/8" 2" 3-7/64" 6-3/16" 2-5/16" 1-1/2" Description Front/Center/Rear Hanger Front/Center/Rear Hanger Center Hanger Center Hanger Center Hanger Rear Hanger Rear Hanger with Steel Bushing* Hanger for 1-3/4" Slipper Springs Part # 9000122 9000099 9000170 Ref # HR07F SH01B 29-5-1 Top to Hole Center 1-1/4" 4-1/2" Part # 9000290 9000291 9000292 9000100-02 9000100 9000105-02 9000105 9000106-02 9000106 9000119 9000121 9000120 9000118 9000117 Ref # 29-1 28-1 30-28 HR27F 721586 HR25F 721584 HR26W 721585 28-9-1 30-6-1 28-68-4 30-68-1 29-39-4 Top to Hole Center 3-1/2" 4-1/4" 5-1/4" 4-3/8" 4-3/8" 3-9/16" 3-9/16" 5-1/16" 5-1/16" 5" 6-3/8" 5" 6-5/16" 4-1/2" 1.25" 4.50" Bolt Size 9/16" 7/8" Height 2" 5-1/2" Description Front Hanger Rear Hanger C-Clip 7.2K - 8K Center Hanger Hanger for 2" Slipper Springs 3.50" 4.25" 5.25" 4.38" 4.38" 3.57" 3.57" 5.07" 5.07" 5.00" 6.38" 5.00" 6.33" 4.50" Bolt Size 7/8" 9/16" 5/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 5/16" 5/8" 5/16" 1" Height 4-1/2" 4-7/8" 5-23/32" 4-1/2" 4-1/2" 4-5/16" 4-5/16" 6" 6" 5-5/8" 6-13/16" 6" 6-13/16" 5-1/2" Description 3.5K - 7K Center Hanger 3.5K -7K Front Hanger 3.5K -7K Rear Hanger 3.5K -8K Center Hanger 3" Wide 3.5K -8K Center Hanger 4" Wide 3.5K -8K Front Hanger 3" Wide 3.5K -8K Front Hanger 4" Wide 3.5K -8K Rear Hanger 3" Wide 3.5K -8K Rear Hanger 4" Wide 7.2K - 9K Front Hanger 8K - 9K Rear Hanger 8K - 9K Rubber Bushed Front Hanger 8K - 9K Rubber Bushed Rear Hanger 8K -9K Rubber Bushed Center Hanger Hanger for 2-1/2" Slipper Springs Part # Ref # Top to Hole Center Bolt Size 9000108 29-33 4-7/16" 4.44" 3/4" 9100089-03 29-42-2 4-1/8" 4.13" 1" 9100072-03 28-74-2 5-1/4" 5.25" 3/4" 9000116 28-60 5-1/4" 5.25" 3/4" 9000265 28-72-1 5-1/4" 5.25" 7/8" 9100072-02 30-61-1 4-7/16" 4.41" 5/16" 9000115 28-59 5-1/4" 5.25" 3/4" 9000264 28-73-1 5-1/4" 5.25" 7/8" 9000286 HR33F 4-7/16" 4.44" 1" 9000281 HR32FL 2-1/2" 2.50" 13/16" 9000283 HR31W 3/4" 9000288 HR32FR 2-1/2" 2.50" 13/16" 9000126 7416 1-7/8" 1.90" 1" 9000171 7417 5-3/8" 5.38" 3/4" 9000125 7418 5-3/8" 5.38" * Measurement from Top of Hanger to Outside Bottom Dimension of Bushing. Height 5-15/16" 5-5/8" 6-1/2" 7" 7" 6-15/16" 7" 7" 5-7/8" 4-1/2" 4-1/2" 4-1/2" 3-1/4" 8" 8" Description 10K GD Center Hanger 10K GD Center Hanger 10K GD Front Hanger 10K GD LH Front Hanger 10K GD LH Front Hanger 10K GD Rear Hanger 5-15/32" (5.46")* 10K GD RH Front Hanger 10K GD RH Front Hanger 10K HD Center Hanger 10K HD LH Front Hanger 10K HD Rear Hanger 10K HD RH Front Hanger AL-KO/Hayes 10K -16K Center Hanger AL-KO/Hayes 10K -16K Front Hanger AL-KO/Hayes 10K -16K Rear Hanger Hanger for 3" Slipper Springs Part # Ref # Top to Hole Center 9000296 29-43-2 4-1/8" 9000110 29-37-4 4-1/2" 9000112 28-67-4 6-1/4" 9000111 30-66-1 7-51/64" * New Center Hanger for HAP-203 WWW.TEXTRAIL.COM 4.13" 4.50" 6.25" 7.80" Bolt Size 1-1/8" 1-1/8" 1" 1/2" B-24 Height 5-5/8" 6" 7-1/2" 8-39/64" Description 10K HD - 15K Center Hanger (Machined)* 10K HD - 15K Center Hanger (Reamed) 10K HD - 15K Front Hanger 10K HD - 15K Rear Hanger 2010 Copyright by TexTrail, Inc. SUSPENSIONS Hanger for 1-3/4" Double Eye Springs Part # Ref # 9000113 28-5 9000114 28-49 9000122 HR07F 9000128 HR08F 9000129 HR34F 9000123 HR06F 9000127 30-20 * Single Axle Only SUSPENSIONS SUSPENSIONS Equalizers Type 1 Type 2 Type 3 Type 4 Type 5 Cast Equalizers Part # Ref # A B C D E O.D. 9000091 9000088 9000066 9000065 9000090 9000089 9000067 A2251B A2251B3 13-10 13-104-2 E1 E3 E4 8" 8" 6" 5-5/8" 7-3/4" 7-3/4" 6-1/4" 4" 4" 4" 2" 2-7/8" 2-7/8" 2" 9/16" 9/16" 9/16" 9/16" 9/16" 3/4" 3/4" 9/16" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16" 2-13/16" 3-7/8" 3-7/8" 3-1/8" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" Description Straight Cast Equalizer 2K - 7K Straight Cast Equalizer Tall Cast Equalizer Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Short Curved Cast Equalizer Part # Ref # A B C D E F G 9000094 13-4 3/4" 4-3/4" 4-3/4" 5/16" 5" 7/8" 9/16" Part # Ref # Spacing A E F G I.D. 9100089-02 9000074 9000075 13-139-3 13-80-1 13-81-1 38" 38" 38" 14-1/4" 14-1/4" 14-1/4" 1-3/8" 1-3/8" 1-3/8" 1" 1" 1" 3/4" 3/4" 3/4" 2-3/4" 2-3/4" 2-3/4" 9000266 9000267 9100090-02 9000076 9000077 9000268 9000269 9100091-02 9000078 9000079 9000270 9000271 9000060 9000061 9000063 9000062 9000095 9000064 13-132-2 13-133-2 13-140-3 13-82-1 13-83-1 13-134-2 13-135-2 13-141-3 13-84-1 13-85-1 13-136-2 13-137-2 8327 8328 8319 8320 8315 8316 38" 38" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/4" 48-1/4" 14-1/4" 14-1/4" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 15-3/4" 15-3/4" 15-3/4" 15-3/4" 21-3/4" 21-3/4" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" - 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" Part # 9000383 9000384 9000083 9000082 9000085 Ref # EQ05LW EQ05RW 13-107-7 13-108-3 13-109-3 Spacing 42-1/4" 42-1/4" 38" 42-1/4" 48-1/2" A 18-1/2" 18-1/2" 14-1/4" 18-3/8" 24-3/4" B 7-3/4" 7-3/4" 4-1/2" 6-3/4" 10" C 7-1/16" 7-1/16" 5" 7-1/8" 10-3/8" Type 1 1 2 2 2 2 2 2" Slipper Spring Equalizers Description 3.5K - 8K 33.5" Spacing Bullnose Equalizer 2-1/4" ID Part # Ref # A B C D E F G Description 9000092 13-44-1 13-1/8" 5-9/16" 5-15/16" 3-1/2" 9/16" 15/16" 3/8" 3.5K - 8K 36" Spacing Equalizer 9000272 E4541 12" 4-3/4" 4-7/16" 3-7/8" 9/16" 7/8" 9/16" 3.5K - 8K 2-1/4"ID Heavy Duty Equalizer 1-3/8"THC* 9000070 E5541 12" 4-3/4" 4-7/16" 3-7/8" 9/16" 7/8" 9/16" 3.5K - 8K 2-1/4"ID Heavy Duty Equalizer 1-7/16"THC* 9000072 13-117-3 13-1/8" 5-1/2" 5-9/16" 5/8" 15/16" 5/16" 8K - 9K 38" Spacing Equalizer 9000071 13-118-3 17-3/8" 7-5/8" 7-3/4" 5/8" 15/16" 5/16" 8K - 9K 42-1/4" Spacing Equalizer 9000073 13-119-3 23-1/2" 10-3/4" 10-3/4" 5/8" 15/16" 5/16" 8K - 9K 48-1/2" Spacing Equalizer 9000069 8329 13-7/8" 7/16" 7/8" 9/16" AL-KO/Hayes 8K Equalizer * THC = Top View of Equalizer has two 9/16" holes. E4541 has holes centered at 1-3/8" & 1-1/4". E5541 has holes centered at 1-7/16" & 1-1/4". Type 3 Type 4 4 4 4 4 4 4 2-1/2" Slipper Spring Equalizers Description 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad AL-KO/Hayes 9-16K LH Short Equalizer with bushings AL-KO/Hayes 9-16K RH Short Equalizer with bushings AL-KO/Hayes 9-16K LH Medium Equalizer with bushings AL-KO/Hayes 9-16K RH Medium Equalizer with bushings AL-KO/Hayes 9-16K LH Long Equalizer with bushings AL-KO/Hayes 9-16K RH Long Equalizer with bushings Type 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3" Slipper Spring Equalizers WWW.TEXTRAIL.COM D 1-1/4" 1-1/4" 1-1/8" 1-1/8" 1-1/8" E 1" 1" 1" 1" 1" B-25 I.D. 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8" Description 10K General Duty LH Equalizer with bushing 10K General Duty RH Equalizer with bushing 10K Heavy Duty Equalizer with rubber bushing 10K Heavy Duty Equalizer with rubber bushing 10K Heavy Duty Equalizer with rubber bushing Type 5 5 5 5 5 2010 Copyright by TexTrail, Inc. SUSPENSIONS Suspension Hardware Ref # TTBN916 TTBN917 Diameter 9/16"-18 9/16"-18 Part # 9000018 9000004 9000010 9000034 9000017 9000016 9000009 9000020 9000014 9000030 9000031 9000023 9000008 9000011 9000021 9000280 9000019 9000013 9000012 Ref # 126B2LN 126A1LN 7-135-2 7-260-2 7-1 7-1-1 7-136-2 7-7 7-95 7-3 7-17 90722 5821 5819 7-181 7-264 7-182 7-169 7-170 Diameter 9/16"-18 3/4"-16 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 5/16"-18 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-10 1"-8 5/8"-11 3/4"-10 1"-8 1"-8 1-1/8"-7 9000140 9000146 9000142 9000137 7700181 9000143 9000147 9000145 9000144 9000139 9000149 9000138 9000135 9000148 9000136 9000153 6450182 6450181 9000152 90626 6-3 6-62 6-46 12FHFNP 6-11 6-7 6-111 6-38 6-47 6715 6-113 6-72 6716 6-112 12N 6-10 6-17 916N 3/4"-16 7/8"-9 3/8"-24 1/2"20 1/2"-20 5/16"18 9/16"-18 7/8"-9 5/8"-11 3/4"-16 3/4"-10 3/4"-10 1-1/8"-7 1"-8 1"-8 1/2"-20 3/8"-24 7/16"-20 9/16"-18 9000250 7030116 9000251 9000252 7030118 7030109 Pins & Zerks Part # 8750003 9000096 9000132 8750004 38LW 5-8 5-58 916LW 76127 76128 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" Ref # 19-2 61-6 1610 61-7 Diameter 1/8" 1/4"-27 1/4"-27 1/4"-28 WWW.TEXTRAIL.COM Shackle Nut & Bolt Kits Length Description 3" Shackle Nut & Bolt Kit Quantity 4-each 3-1/2" Shackle Nut & Bolt Kit Quantity 4-each Bolts & Screws Length Description 3" Grease Zerk Bolt for Spring Eye 3-1/2" Grease Zerk Bolt less Grease Zerk 4-1/2" Grease Zerk Spring Eye Bolt 4-1/2" Grease Zerk Bolt for Spring Eye 4-5/8" Grease Zerk Bolt Grade 2 with Cotter Pin Hole 4-5/8" Grease Zerk Bolt Grade 2 without Cotter Pin Hole 5-1/4" Grease Zerk Bolt 3-1/4" Hex Head Bolt Grade 2 4-1/2" Hex Head Spring Retaining Bolt 3" Hex Head Shackle Bolt for 1-3/4" Springs 3-1/2" Hex Head Shackle Bolt for 2" Springs 3-1/2" Hex Head Bolt Black Oxide Grade 8 4-1/2" Hex Head Bolt Black Oxide Grade 8 5-7/8" Hex Head Bolt Black Oxide Grade 8 4" Hex Head Cap Screw Grade 5 4-1/2" Hex Head Cap Screw 5" Hex Head Cap Screw Grade 5 5-1/2" Hex Head Cap Screw Grade 5 6" Hex Head Cap Screw Grade 5 Nuts Castle Nut Grade 2 Black Oxide Castle Nut Grade 2 Flange Lock Nut Grade 5 Zinc Flange Lock Nut Grade B Serrated Plain Hex Flange Nut Grade 2 Hex Head Lock Nut Grade A Zinc Hex Head Lock Nut Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Zinc Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Nut Hex Nut Grade 2 Zinc Hex Nut Grade 5 Zinc Hex Head Nut Washers Lock Washer Lock Washer Grade 5 Zinc Lock Washer Lock Washer Lock Washer Grade 5 Zinc Lock Washer Grade 5 Zinc Length 1-3/4" Description Cotter Pin Grease Zerk 65° Angle 1/8"-27 MPT Grease Zerk Straight 1/8"-27 MPT Grease Zerk Straight Thread Forming 0.20/235D Hole EZ-Lube B-26 2010 Copyright by TexTrail, Inc. SUSPENSIONS Part # 9000030-01 9000031-01 SUSPENSIONS SUSPENSIONS Heavy Duty Suspension System The Hutch 9700 Series remains the leader in heavy duty trailer suspensions. Hutch incorporates innovative thinking resulting in a durable and reliable system that not only extends service life, reduces downtime and protects cargo but also provides a smooth and comfortable ride. Heavy Duty Suspension ITEM # REF # DESCRIPTION 9100109 HAP-101-00 Single Under Slung Kit 9100110 HAP-201-00 Add-On Under Slung Kit 9100026 9700TUS Tandem Suspension w/ Springs CAPACITY 25K 25K AXLE Single Tandem SPRINGS 354-00 The Basis of any order must begin with a complete description of the unit. The following procedure will provide the descriptive information required: 1. Determine the number of axles required and the spacing of these axles. We stock hangers for tandem axles with 49” axle centers. 2. Select the style of hangers required to mount the suspension on your particular frame or subframe. Specify whether these hangers are to be fabricated (H) or cast (CH) steel. Fabricated hangers are in stock. 3. Determine the mounting height (Mtg/ht) your application requires. A Mounting Height Chart may be found on the next page. 4. Please note that mounting height is dependent upon: a) Suspension configuration – Overslung or Underslung. Unless other-wise specified, suspension configuration is assumed to be overslung. b) Axle size - 5”. c) Spring seat height – 3/4” to 4 3/4” in 1/2” increments. d) Spring type – Standard or Heavy-Duty, number of leaves and spring arch. 5. Choose which U-bolt size you would like (either the standard 7/8” or the optional 3/4” size). WWW.TEXTRAIL.COM B-27 2010 Copyright by TexTrail, Inc. SUSPENSIONS Heavy Duty Suspension System Continued Quantity Hanger Type 1ea H Series Number Axle Config Hangers U-Bolts 5" Round Axles See Mounting Chart Springs 9700 T Un/mt 3/4" 5" rd 3/4" seat 354-00 Mounting Height Chart: Nominal Values For No-Load Conditions WWW.TEXTRAIL.COM B-28 2010 Copyright by TexTrail, Inc. SUSPENSIONS NOTE: In many instances more than one combination will result in the same mounting height. Therefore, all of the aforementioned factors should be taken into consideration when ordering. Example: A tandem axle (T) 9700 Series suspension requiring a mounting of 16” and fabricated (H) under mount hangers (Un/mt) for use with 3/4” U-bolts and 5” round axles with 354-00 springs would be ordered as follows: SUSPENSIONS SUSPENSIONS Air Suspension System WELD ON AIR RIDE CAPACITY 9100124 TA-120U 10-12K 9100226 TA-250U 15-25K RIDE HEIGHT AXLE TRAVEL UP DOWN MIN SPACING 6" 3.13" 3.25" 38" 6.5 3.25 5" 46" AIR CONTROL KITS Includes HCV Valve and Brake Protection Valve 9100062 ACK-203 Automatic Single Height Control Valve Kit. Includes HCV 9100125 ACK-201 Automatic Dual Height Control Valve Kit. Includes HCV 9100126 17760-04 Height Control Valve. For use with Kit Below 9100127 19535 9100128 19535-B 9100129 17988 Manual Height Control. Includes Regulator and Gauge Bracket for Manual Height Control Valve Dump Valve AIR COMPRESSOR KIT 9100218 25435 Air control system for trailers without air control Kit Includes: - Heavy Duty Compressor - Air Tank - Air Line - Fuse Block / Fuse - Fittings & Hardware *HCV must be purchased above WWW.TEXTRAIL.COM B-29 2010 Copyright by TexTrail, Inc. SUSPENSIONS Air Suspension System SUSPENSIONS 9100217 Quick Shot On-Board Air Compressor Kit 9100198 Air Lift for 2009 Chevy Silverado 9100212 Wireless Digital Handheld Controller Unit Air Springs & Accessories Part # 9100209 9100203 9100204 9100198 9100201 9100202 9100202 9100203 9100216 9100206 9100207 9100206 9100207 9100216 9100201 9100200 9100205 9100214 9100201 9100208 9100203 9100204 9100201 9100202 9100202 9100199 9100210 9100211 9100212 9100215 9100217 9100218 9100219 Ref # 59501 57250 57275 59565 57215 57216 57216 57250 59551 57295 57297 57295 57297 59551 57215 57212 57291 57125 57215 57298 57250 57275 57215 57216 57216 57299 25592 25415 72000 52130 25690 25435 50203 Make ALL Chevy Chevy Chevy Chevy Chevy Chevy Chevy Dodge Dodge Dodge Dodge Dodge Dodge Dodge Ford Ford Ford Ford Ford GMC GMC GMC GMC GMC Toyota WWW.TEXTRAIL.COM Year 66-08 01-08 01-10 07-11 69-04 88-00 88-89 99-08 02-08 03-07 03-07 03-08 03-08 02-08 69-04 05-08 05-08 00-99 69-04 71-04 01-08 01-08 69-04 88-00 88-89 07-09 Description Ride Control Series Silverado 1500 Heavy Duty Silverado 2500HD & 3500 1TON P/U 2&4WD Silverado 1500 GMT 900 Series 3/4Ton - 1Ton Super Duty 3/4Ton - 1Ton Super Duty 1/2Ton Silverado 2500 3/4 TON P/U 2&4WD EXCEPT 2500HD Ram 1500 1/2Ton Super Duty Series 2500 & 3500 4WD Super Duty Series 2500 & 3500 2WD Ram 2500 4WD & 3500 4WD Single & Dual Wheels Ram 2500 4WD & 3500 2WD Single & Dual Wheels Ram 1500 1/2Ton 3/4Ton - 1Ton Super Duty F250 & F350 without 5th Wheel or Gooseneck Hitch F250 & F350 Super Duty Series with B&W Hitch E-350 Super Duty Series Van 3/4Ton - 1Ton Super Duty F250 & F350 Super Duty Series with Reese 5th Wheel Hitch Sierra 1500 Heavy Duty Sierra 2500HD & 3500 1TON P/U 2&4WD 3/4Ton - 1Ton Super Duty 3/4Ton - 1Ton Super Duty 1/2Ton Tundra LOADCONTROLLER II Single Gauge Compressor System 5psi SMARTAIR Single Sensor Auto Leveling System Wireless Digital Handheld Controller Unit 2" Lock & Lift Spacer with mounting hardware Quick Shot On-Board Single Gauge / Dual Control Air Compressor Kit Air Ride Compressor Kit 150psi with 5-Gal Tank & HCV Sleeve Replacement for Ride Control Kit B-30 2010 Copyright by TexTrail, Inc. TIRES & WHEELS TIRES & WHEELS Table of Contents - Tires & Wheels Center Caps C-6 Chrome Wheel Nuts C-5 Hub Caps C-5 Hub Covers C-6 Locking Lug Nuts C-5 Lug Wrench C-5 Simulators C-6 Tire & Wheel Assemblies C-8 Tires C-8 Valve Stems C-5 Wheel & Tire Assemblies C-8 Wheel Nuts C-5 Wheel Covers C-6 Wheel Simulators C-6 Wheels C-7 WWW.TEXTRAIL.COM C-1 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Tire & Wheel Assembly Description ST ST WWW.TEXTRAIL.COM C-2 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Explanation of part # ST205DLRB-155SM545 Trailer Tire / 205mm / Bias Ply / Load Range B / 15 x 5 Wheel / Silver Mod / 5 on 4-1/2" Bolt Pattern 205 D LRB 155 SM 545 Description Trailer Tire 205 205mm Tire Size (Width) 225 225mm Tire Size (Width) 23580 235mm Tire Size (Width) 80 ratio 235 235mm Tire Size (Width) 85 ratio D Bias Ply R Radial Ply A Load Range A B Load Range B C Load Range C D Load Range D E Load Range E F Load Range F G Load Range G J Load Range J 145 14 x 5 Wheel Size 146 14 x 6 Wheel Size 155 15 x 5 Wheel Size 156 15 x 6 Wheel Size 166 16 x 6 Wheel Size 167 16 x 7 Wheel Size AM Aluminum Mod Wheel BS Black Spoke Wheel CD Chrome Directional Wheel CS Chrome Spoke Wheel DL Dual Wheel GAL Galvanized Wheel OEM OEM Style Wheel SD Silver Dual Wheel SM Silver Mod Wheel SS Silver Spoke Wheel WD White Dual Wheel WM White Mod Wheel WS White Spoke Wheel 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5" TIRES & WHEELS Tire & Wheel Assembly Description TIRES & WHEELS 750 185 205 480 530 570 16 8 10 12 13 14 15 16 Explanation of part # 75016DLRE-166SM655 750mm / 16" Diameter / Bias Ply / Load Range E / 16 x 6 Wheel / Silver Mod / 6 on 5-1/2" Bolt Pattern D LRE 166 SM 655 Description 8" Only 8" & 10" Only 8", 10" & 12" 10" & 12" Only 8" Only 8" Tire Diameter 10" Tire Diameter 12" Tire Diameter 13" Tire Diameter 14" Tire Diameter 15" Tire Diameter 16" Tire Diameter D Bias Ply R Radial Ply A Load Range A B Load Range B C Load Range C D Load Range D E Load Range E F Load Range F G Load Range G J Load Range J 850 8 x 5 Wheel Size 8375 8 x 3-3/4 Wheel Size 106 10 x 6 Wheel Size 124 12 x 4 Wheel Size 125 12 x 5 Wheel Size 145 14 x 5 Wheel Size 146 14 x 6 Wheel Size 155 15 x 5 Wheel Size 156 15 x 6 Wheel Size 166 16 x 6 Wheel Size 167 16 x 7 Wheel Size AM Aluminum Mod Wheel BS Black Spoke Wheel CD Chrome Directional Wheel CS Chrome Spoke Wheel DL Dual Wheel GAL Galvanized Wheel OEM OEM Style Wheel SD Silver Dual Wheel SM Silver Mod Wheel SS Silver Spoke Wheel WD White Dual Wheel WM White Mod Wheel WS White Spoke Wheel 440 4 on 4" 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5" WWW.TEXTRAIL.COM C-3 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Wheel Description WWW.TEXTRAIL.COM C-4 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Explanation of part # Wheel 15x6 550 CRMDIR Trailer Tire / 205mm / Bias Ply / Load Range B / 15 x 5 Wheel / Silver Mod / 5 on 4-1/2" Bolt Pattern Wheel 15X6 550 CRMDIR Description Wheel Wheel 12x4 12 x 4 Tire Diameter 13x4.5 13 x 4-1/2 Tire Diameter 14x6 14 x 6 Tire Diameter 15x5 15 x 5 Tire Diameter 15x6 15 x 6 Tire Diameter 15x7 15 x 7 Tire Diameter 15x8 15 x 8 Tire Diameter 15x10 15 x 10 Tire Diameter 16x6 16 x 6 Tire Diameter 16x7 16 x 7 Tire Diameter 16x7.5 16 x 7-1/2 Tire Diameter 16x7HD 16 x 7 Tire Diameter Heavy Duty 16.5x6.75 16-1/2 x 6-3/4 Tire Diameter 17.5x6.75 17-1/2 x 6-3/4 Tire Diameter 440 4 on 4" 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5" ALUMOD Aluminum Mod Wheel BLKSPK Black Spoke Wheel CRMDIR Chrome Directional Wheel CRMSPK Chrome Spoke Wheel CRMMOD Chrome Mod Wheel DL Dual Wheel SGL Single Wheel GALMOD Galvanized Mod Wheel GALSPK Galvanized Spoke Wheel OEM OEM Style Wheel SLVDL Silver Dual Wheel SLVMOD Silver Mod Wheel SLVSPK Silver Spoke Wheel WHTDL White Dual Wheel WHTMOD White Mod Wheel WHTSPK White Spoke Wheel TIRES & WHEELS TIRES & WHEELS TIRE AND WHEEL ACCESSORIES Valve Stems Description 2 Part # Ref # Type 9300055 9300054 9300052 TR600C TR600 TR801 1 1 1 Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Description 1 Chrome Stem / Rubber Snap-in Small Hole Up to 100psi Metal Stem / Rubber Snap-in Small Hole Up to 100psi Metal Stem / Rubber Snap-in Large Hole Up to 100psi 9300028 TR413 2 Valve Stem 0.453"DIA x 1.25"L Rubber 9300050 9300030 9300051 9300053 9300031 501SW TR415 TR572 TR416 TR500 3 4 5 6 7 Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 3.75"L Valve Stem 1.5"L Chrome Metal Valve Stem 0.625"DIA x 2"L Metal Outer Mount for Aluminum Wheels 0.453 Grommet Rubber Metal Long Pressure Over 100psi Tubeless Tire Valve Outer Mount High Performance 100psi maximum Metal NOTE: "A" above is the length of the stem Lug Wrenches Part # Ref # Description 9420050 405 Telescoping Lug Wrench w/ 13/16", 7/8" & 17-18MM Dual Sockets 9420051 433 20" Cross Lug Wrench 17MM, 3/4" 13/16" & 7/8" with Bag Part # Ref # 8200220-01 TTWL120 9420050 9420051 Locking Lug Nuts Description 1/2" Locking Wheel Nut with Key 8200220-01 Chrome Wheel Nuts Part # Ref # Type 7700044 7700202 7700201 1904 1904L 3010 A A B Description 1/2" 60° Acorn Chrome Hex Wheel Nut 1/2" 60° Acorn Chrome Hex Wheel Nut Bulge 1.75" Long 9/16" 60° Acorn Chrome Duplex Hex Wheel Nut See page A-94 for more wheel nuts. Hub Caps Part # Ref # ID 7600120 7600121 7600012 7600011 7600013 1102 1302 1308 1306 1309 7.66" 8.74" 9.23" 10.125" 11.563" Description Fits Wheel Size Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap 8, 12 & 13 15 14 & 15 14 & 15 16 & 16.5 WWW.TEXTRAIL.COM C-5 2010 Copyright by TexTrail, Inc. TIRES & WHEELS TIRE AND WHEEL ACCESSORIES Ref # 295EZ 319EZ 328EZ 425EZ 482EZ 512EZ 319SS 328SS 425SS 482SS 512SS CCCP BCCP Center Caps Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug Fits Pilot Hole 2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125" Chrome Hub Covers Description ABS Chrome Hub Cover ABS Chrome Hub Cover ABS Chrome Hub Cover 13/16" Lug ABS Chrome Hub Cover 7/8" Lug Chrome Wheel Covers Part # Ref # Description 7600028 QT544CLO ABS Chrome Wheel Cover 7600029 QT545CLO ABS Chrome Wheel Cover 7600030 QT655CLO ABS Chrome Wheel Cover 13/16" Lug 7600031 QT6556CLO ABS Chrome Wheel Cover 7/8" Lug 7600032 QT865CLO ABS Chrome Wheel Cover 7/8" Lug Part # 7600025 7600023 7600024 7600018 Part # 7600051 7600004 7600021 7600015 7600050 7600016 7600049 Ref # QT545C QT655C QT765C QT865C Ref # GQST50 GQT60 GDST87 NDT165 GDST175 N27510 PGQ60POC Stainless Steel Wheel Simulators Description Wheel Simulator - Single Wheel Truck / Trailer Set Wheel Simulator - Snap On Wheel Simulator - Bolt On Wheel Simulator - Piggy Back Wheel Simulator - Single Wheel Trailer Set Wheel Simulator - Piggy Back Wheel Simulator - Replacement Center Pop Out WWW.TEXTRAIL.COM C-6 Wheel Lugs 4 4 5 5 or 6 8 8 5 5 5 or 6 8 8 Wheel Lugs 545 655 865 865 Wheel Lugs 545 655 865 865 865 Dual Dual Dual Wheel Size 15" 16" 16" / 16-1/2" 16" / 16-1/2" 17-1/2" 17-1/2" - Wheel Lugs 6 8HH 8 8 8 4HH 8 10 - 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Part # 7600100 7600101 7600102 7600103 7600104 7600105 7600108 7600112 7600109 7600110 7600111 7600107 7600106 TIRES & WHEELS Wheels Part # Ref # Center Cap Diameter Width Capacity Finish Style Pilot Offset Bolt Pattern Description TIRES & WHEELS Modular Wheels 9700825 345545WM1 7600100 13" 4-1/2" 1468 White Mod 2.99 0 545 Steel Wheel 9700079 240545WM1 7600100 12” 4” 1045 White Mod 2.95 0 545 Steel Wheel 9700830 460545WM1 7600102 14" 6" 1869 White Mod 3.27 0 545 Steel Wheel 9700760 550545SM1 7600101 15" 5" 1870 Silver Mod 3.19 0 545 Steel Wheel 9700765 550547SM1 7600102 15" 5" 1870 Silver Mod 3.31 -0.55 5475 Steel Wheel 9700770 550550SM1 7600101 15" 5" 1870 Silver Mod 3.19 0 550 Steel Wheel 9700932 550555SM1 7600103 15" 5" 1870 Silver Mod 4.25 -0.67 555 Steel Wheel 9700835 550545WM1 7600101 15" 5" 1870 White Mod 3.19 0 545 Steel Wheel 9700670 550547WM1 7600102 15" 5" 1870 White Mod 3.31 -0.55 5475 Steel Wheel 9700840 550550WM1 7600101 15" 5" 1870 White Mod 3.19 0 550 Steel Wheel 9700550 CH1545 7600101 15" 6" 2050 Chrome Mod 3.19 0 545 Steel Wheel 9700555 CH155 7600102 15" 6" 2050 Chrome Mod 3.31 0 550 Steel Wheel 9700560 CH15655 7600103 15" 6" 2540 Chrome Mod 4.25 0 655 Steel Wheel 9700775 560545SM2 7600101 15" 6" 2600 Silver Mod 3.19 0 545 Steel Wheel 9700776 560550SM1 7600102 15" 6" 2600 Silver Mod 3.31 0 550 Steel Wheel 9700780 560655SM1 7600103 15" 6" 2600 Silver Mod 4.25 0 655 Steel Wheel 9700845 560545WM1 7600102 15" 6" 2600 White Mod 3.31 0 545 Steel Wheel 9700850 560550WM1 7600102 15" 6" 2150 White Mod 3.31 0 550 Steel Wheel 9700855 560655WM1 7600103 15" 6" 2600 White Mod 4.25 0 655 Steel Wheel 9700060 CH166 7600103 16" 6" 3000 Chrome Mod 4.25 0 655 Steel Wheel 9700112 1750865W8125 7600104 17.5" 6.75” 5956 White Mod 8.70 0 865 Steel Wheel 9700785 660655SM1 7600103 16" 6" 3500 Silver Mod 4.25 0 655 Steel Wheel 9700790 660865SM1L 7600105 16" 6" 3750 Silver Mod 5.12 0 865 Steel Wheel 9700791 660865SM3 7600104 16" 6" 3960 Silver Mod 4.88 0 865 Steel Wheel 9700860 660655WM1 7600103 16" 6" 3500 White Mod 4.25 0 655 Steel Wheel 9700865 660865WM1 7600105 16" 6" 3750 White Mod 5.12 0 865 Steel Wheel 9700875 660865WM3 7600104 16" 6" 3960 White Mod 4.88 0 865 Steel Wheel 9700510 AL166 7600103 16" 7" 3200 Aluminum Mod 4.25 0 655 Aluminum Wheel 9700890 240545WS1 7600100 12" 4" 1100 White Spoke 2.95 0 545 Steel Wheel 9700900 345545WS1 7600100 13" 4-1/2" 1468 White Spoke 2.99 0 545 Steel Wheel 9700905 460545WS1 7600102 14" 6" 1869 White Spoke 3.27 0 545 Steel Wheel 9700800 550550SPS1 7600102 15" 5" 1870 Silver Spoke 3.27 0 550 Steel Wheel 9700915 550545WS1 7600102 15" 5" 1870 White Spoke 3.31 0 545 Steel Wheel 9700920 550547WS1 7600102 15" 5" 1870 White Spoke 3.31 -0.31 5475 Steel Wheel 9700925 550550WS1 7600101 15" 5" 1870 White Spoke 3.19 0 550 Steel Wheel 9700930 550555WS1 7600103 15" 5" 1870 White Spoke 4.25 -0.67 555 Steel Wheel 9700935 560545WS2 7600101 15" 6" 2600 White Spoke 3.19 0 545 Steel Wheel 9700945 560550WS1 7600102 15" 6" 2600 White Spoke 3.31 0 550 Steel Wheel 9700950 560555SWA 7600103 15" 6" 2150 White Spoke 4.25 0 555 Steel Wheel 9700955 560655WS1 7600103 15" 6" 2600 White Spoke 4.25 0 655 Steel Wheel 9700960 660655WS1 7600103 16" 6" 3500 White Spoke 4.25 0 655 Steel Wheel 9700965 66865WS569D 7600105 16" 6" 3750 White Spoke 5.12 0 865 Steel Wheel Spoke Wheels WWW.TEXTRAIL.COM C-7 2010 Copyright by TexTrail, Inc. TIRES & WHEELS 9400012 9400013 9400032 9400539 9400033 Part # Ref # Load Range Center Cap Diameter Width Capacity Finish Style Pilot Offset Bolt Pattern Description 9700605 660865SDPK - 16” 6” 3200 Silver Dual 4.77 5.35 865 Dual Steel Wheel 9700620 6608655SDPK - 16” 6” 3200 Silver Dual 4.8 5.35 865 Dual Steel Wheel 9700057 1750875WD2 - 17-1/2" 6-3/4" 6500 White Dual 6.50 6.19 10-875 Hub Piloted Wheel 9700600 1750865SP1125 - 17-1/2" 6-3/4" 6005 White Single 4.75 -0.31 865 Steel Wheel 9700061 165675DF - 16-1/2" 6-3/4" - Steel Coined - - 865 Dual Steel Wheel 9700530 CH1055D 7600102 15" 6" 2050 Chrome Directional 3.31 0 9700083 1750865WD4 17.5” 6.75” 5530 White Dual 9700056 LT2532SP 17.5 6.75 6005 White Single 9700720 660665GOEM 7600103 16" 6" 3200 Silver OEM 9700038 16563TO 7600103 16" 7" 3000 Silver OEM Part # Ref # Load Range O.D. S.W. Ply Rating Type Maximum Load Capacity Maximum PSI 9300315 TR20515 C 27.13 7.99 6 Radial 1820 50 Tire ST20575R15C Trailer Tire 9300319 TR22515 D 28.31 8.78 8 Radial 2600 65 Tire ST22575R15D Trailer Tire 9300323 TR23516E E 30.40 9.25 10 Radial 3520 80 Tire ST23585R16E Trailer Tire 9300041 TKR23516 E 30.7 9.05 10 Radial 3520 80 Tire ST23580R16E Provider 9300044 TD235-16E E 30.79 9.25 10 Bias 3520 80 Tire ST23580D16E Maximum PSI Bolt Pattern Wheel Finish Wheel Type Description 550 Steel Wheel 8-275 Hub Piloted Wheel .5 865 Steel Wheel 4.25 0 655 Steel Wheel 4.25 0 655 Full Face Steel Wheel OEM Style Wheels Tires Description 8" & 10" Wheel & Tire Assemblies Part # Ref # Load Range O.D. S.W. Tire Size Maximum Load Capacity 9400014 T0862E4RW B 18.3 5.6 8x3.75 715 75 440 White OEM 5.70-8 Bias Ply 9400521 MT0864A4RW C 18.3 5.6 8x3.75 910 100 440 White OEM 5.70-8 Bias Ply 9400015 T0862E5RW B 18.3 5.6 8x3.75 715 75 545 White OEM 5.70-8 Bias Ply 9400522 T0864E5RW C 18.3 5.6 8x3.75 910 100 545 White OEM 5.70-8 Bias Ply 9400013 T0854E4RW B 16.3 4.9 8x3.75 590 60 440 White OEM 4.80-8 Bias Ply 9400012 T0854E5RW B 16.3 4.9 8x3.75 590 60 545 White OEM 4.80-8 Bias Ply 9400123 MT0872A4RA B 18.2 8.4 8x7 770 35 440 Almond OEM 18.5x8.5-8 Bias Ply 9400052 MT0872A5RA B 18.2 8.4 8x7 770 35 545 Almond OEM 18.5x8.5-8 Bias Ply 9400033 T1026E4RW C 20.5 7.8 10x6 1105 50 440 White OEM 20.5x8-10 Bias Ply 9400032 T1026E5RW C 20.5 7.8 10x6 1105 50 545 White OEM 20.5x8-10 Bias Ply 9400005 T1030E5RW E 20.5 7.8 10x6 1535 90 545 White OEM 20.5x8-10 Bias Ply ONEstep Wheel Chock 9750027 One Step Tandem Wheel Chock WWW.TEXTRAIL.COM C-8 2010 Copyright by TexTrail, Inc. TIRES & WHEELS Dual Wheels TIRES & WHEELS 9400635 TIRES & WHEELS Part # 9400010 9400539 9400053 9400545 9400074 9400541 9400002 9400547 9400613 Load Ref # Range T1212ES4SW B MT1214AS4SWE C MT1226AS4SWE B T1228ES4SW C A12GS C A12WS C T1226ES5SW B T1228ES5SW C Part # Ref # 9400585 9400595 9400606 9400605 A13BWS A14B45WM A14B45SM A14B45WS Part # Ref # 9400620 9700615 9400625 9400030 9400626 9400636 9400635 9400645 9400671 9400695 9400651 9400612 9400613 9400650 9400656 9400655 9400614 9400003 9400616 9400665 9400618 9400681 9400705 9400680 9400685 A15B45SM A15B45WM A15B45WS A15B45CM A15B475WS A15B5SM A15B5WM A15B5WS A15B6SM A15B6WS A156R45SM A225B645SM A225R645SM A156R45WM A156B45WS A156R45WS A225B645WS A225R65SM A225B65WM A156R5WS A225B65WS A225B6SM A225R6SM A225B6WM A225R6WM 9400650 O.D. S.W. 21.1 21.1 21.9 21.9 20.47 20.47 21.9 21.9 4.8 4.8 5.3 5.3 4.65 4.65 5.3 5.3 Load Range C C C C Center Cap 7600102 7600102 7600102 7600102 Load Range C C C C C C C C C C C D D C C C D D D C D D D D D Center Cap 7600102 7600101 7600101 7600102 7600102 7600101 7600101 7600101 7600103 7600103 7600102 7600102 7600102 7600102 7600101 7600101 7600101 7600102 7600102 7600102 7600102 7600103 7600103 7600103 7600103 O.D. 25.08 25.08 25.08 O.D. 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.13 29.02 28.31 27.13 27.91 27.13 29.02 28.31 29.02 27.13 29.02 29.02 28.31 29.02 28.31 WWW.TEXTRAIL.COM 9400681 12", 13" & 14" Wheel & Tire Assemblies Wheel Max Load Bolt Max PSI Size Capacity Pattern 12x4 780 60 440 12X4 990 90 440 12x4 840 60 440 12x4 1045 80 440 12x4 990 90 545 12x4 990 90 545 12x4 840 60 545 12x4 1045 80 545 13" & 14" Wheel & Tire Assemblies Max Load Wheel Max PSI S.W. Capacity Size 13x4.5 1360 50 7.83 14x6 1760 50 7.83 14x6 1760 50 7.83 14x6 1760 50 15" Wheel & Tire Assemblies Wheel Max Load Max PSI S.W. Capacity Size 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 7.99 15x6 1820 50 8.86 15x6 2540 65 8.78 15x6 2600 65 7.99 15x6 1820 50 8.03 15x6 1820 50 7.99 15x6 1820 50 8.86 15x6 2540 65 8.78 15x6 2600 65 8.86 15x6 2540 65 7.99 15x6 1820 50 8.86 15x6 2540 65 8.86 15x6 2540 65 8.78 15x6 2600 65 8.86 15x6 2540 65 8.78 15x6 2600 65 C-9 23585R16 20575D15 Wheel Finish White White White White White White White Wheel Type Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Bolt Pattern 545 545 545 545 Wheel Finish White White Silver White Wheel Type Spoke Spoke Mod Spoke Bolt Pattern 545 545 545 545 5475 550 550 550 655 655 545 545 545 545 545 545 545 550 550 550 550 655 655 655 655 Wheel Finish Silver White White Chrome White Silver White White Silver White Silver Silver Silver White White White White Silver White White White Silver Silver White White Wheel Type Mod Mod Spoke Mod Spoke Mod Mod Spoke Mod Spoke Mod Mod Mod Mod Spoke Spoke Spoke Mod Mod Spoke Spoke Mod Mod Mod Mod Galvanized Description 4.80-12 Bias Ply 4.80-12 Bias Ply 5.30-12 Bias Ply 5.30-12 Bias Ply 4.80-12 Bias Ply 4.80-12 Bias Ply 5.30-12 Bias Ply 5.30-12 Bias Ply Description ST17580 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply Description ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply ST20575 Radial Ply ST20575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply ST22575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Bias Ply ST22575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply 2010 Copyright by TexTrail, Inc. TIRES & WHEELS 9400684 9400815 9400940 9400936 15" Wheel & Tire Assemblies (Continued) Ref # Load Range Center Cap O.D. S.W. Wheel Size Max Load Capacity Max PSI Bolt Pattern Wheel Finish Wheel Type 9400684 A225B6WS D 7600103 29.02 8.86 15x6 2540 65 655 White Spoke ST22575 Bias Ply 9400700 A225R6WS D 7600103 28.31 8.78 15x6 2600 65 655 White Spoke ST22575 Radial Ply TIRES & WHEELS Part # Description 16" & 17-1/2" Wheel & Tire Assemblies Part # Ref # Load Range Center Cap O.D. S.W. Wheel Size Max Load Capacity Max PSI Bolt Pattern Wheel Finish Wheel Type Description 9400158 A16DE8HWS E 7600105 - - 16X6 3520 80 865 White Spoke ST235D16E-16X6865 9400172 A16DE8HSM E 7600105 - - 16X6 3520 80 865 Silver Mod ST23580D16E-16X6865 9400197 A16RGSM G 7600105 - - 16X6 3750 110 865 Silver Mod ST23585R16G-16X6865 9400722 A16RTK6SM E 7600103 30.79 9.25 16x6 3500 80 655 Silver Mod ST23580R16E 9400723 A16RTK477 E - 30.79 9.25 16x6 3080 80 865 Silver Dual 4.75 Pilot ST23580R16E 9400717 A16DE488 E - 30.71 9.06 16x6 3520 80 865 Silver Dual 5.35 4.88 Pilot ST23580D16E 9400719 A16R488TK E - 30.79 9.25 16x6 3080 80 865 Silver Dual 5.35 4.88 Pilot ST23580R16E 9400770 A16R477 E - 30.79 9.25 16X6 3640 80 865 Silver Dual ST23585R16E-16X6865 9400765 A16B477 E - 31.4 8.5 16x6 2755 75 865 Silver Dual 5.5 4.75 Pilot 750 x 16 Bias Ply LRE 9400724 A16R6SM E - 30.79 9.25 16X6 3640 80 855 Silver Mod ST23585R16E-16X6655 9400795 A16R8WM E - 30.79 9.25 16X6 - - 865 White Mod ST23585R16E-16X6865 9400806 A16RTK8SM E - 30.79 9.25 16x6 3520 80 865 Silver Mod ST23580R16E 9400815 A16RTK8WM E 7600105 30.79 9.25 16x6 3520 80 865 White Mod ST23580R16E 9400804 A16RTK8WM5 E 7600105 30.79 9.25 16x6 3520 80 865 White Mod ST23580R16E 9400808 A16RTK8WS E 7600105 30.79 9.25 16x6 3520 80 865 White Spoke ST23580R16E 9400810 A16R8WS E - 30.79 9.25 16X6 - - 865 White Spoke ST23585R16E-16X6865 9400819 A16R8SM E - 30.79 9.25 16X6 - - 865 White Mod ST23585R16E-16X6865 9400939 A215H/8H50 H 7600104 30.2 8.3 17.5x6.5 4540 123 8-275 White Single 17mm No HH H - 30.2 8.3 17.5x6.5 4540 123 8-275 White Dual 8.7 Pilot 9400936 A215H/17564WD 9400925 A235H/17564 J - 31.4 9.2 17.5x6.75 5675 127 8-275 White Dual 4HH 9400938 A215/8H19 H 7600104 30.2 8.3 17.5x6.75 4540 123 865 White Single Solid Face Radial -0.19 9400940 A215/8H31 H 7600104 30.2 8.3 17.5x6.75 4540 123 865 White Single Solid Face Radial No HH 9400944 A235J/8H19 J 7600104 31.4 9.2 17.5x6.75 5675 127 865 White Single Solid Face Radial No HH 9400942 A235J/8H50 J 7600104 31.4 9.2 17.5x6.75 5675 127 865 Silver Single Solid Face Radial No HH 0.05 9400946 A235J/8H31 J - 31.4 9.2 17.5x6.75 5675 127 865 White Single Solid Face Radial 0.31 9400928 A215H/175WM H - 30.2 8.3 17.5x6.75 4540 123 865 White Mod -0.47 9400158 9400172 WWW.TEXTRAIL.COM 9400197 C-10 9400719 9400810 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S JACKS, COUPLERS & WINCHES Table Of Contents - Jacks, Couplers & Winches Adjustable Clevis Adjustable Pintle Eye Adjustable Tongue Coupler A-Frame Coupler A-Frame Jack Agricultural & Industrial Winches Bolt-On Swivel Jack Coupler Latch Repair Kit Coupler Hardware Kit Direct Weld Swivel Jacks Draw Bar Dropleg Jack Dropleg Jack & Landing Gear Accessories Electric Winches EZ Jack Flat Mount Coupler Gooseneck Coupler Heavy Duty Jack Jack Repair Parts Jack Foot and Caster King Pin Landing Gear Marine Jack Nose Plate Retaining Ring Swivel Jack Pipe Mount Swivel Jack Round Tube Swivel Jack Power Jack Rack Post & Gearbox Scissor Jack Single Speed Winches Snap Ring Swivel Jack Square Tube Swivel Jack Stabilizer Jack Straight Tongue Coupler Superwinch Electric Winches Two Speed Winches Warn Electric Winches Wheel Chock Winch Strap WWW.TEXTRAIL.COM D-1 D-4 D-4 D-4 D-3 D-8 D-15 D-11 D-6 D-4 D-10 D-6 D-12 D-13 D-16 D-12 D-5 D-5 D-12 D-8 D-14 D-5 D-13 D-7 D-6 D-11 D-9 D-9 D-11 D-14 D-11 D-15 D-11 D-0 D-12 D-2 D-16 D-15 D-16 D-12 D-15 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S STRAIGHT TONGUE COUPLERS 1-7/8" Ball Bolt-On Straight Tongue Couplers 6750524 6750523 Ref # CT-2001-O 940-1 960-1 5105-24Z 970-1 Tongue Size 2" 2" 2-1/2" 2-1/2" 3" Part# 6750524 6750045 6750523 6750526 6750044 6750562 6750528 6750046 6750019 6750527 6750020 6750529 6750530 Ref # CT-3001-O 22200 0500 CT-3001-Z CT-3002-O 22250 0500 982-2Z CT-3003-O 22300 0500 80051 CT-3003-Z 80055 CT-5003-Z CT-5003-O Tongue Size 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3" 3" 3" 3" Part# 6750060 6750055 6750023 6750022 6750063 6750059 Ref # 80082 2B2 80060 2B4 3B4 2B5 Tongue Size 2" 2-1/4" 3" 3" 3" 3-1/2" Finish Oily Oily Oily Zinc Oily 6750045 Capacity 2K 2K 2K 2K 2K Latch Low-Pro Quick-Lock Quick-Lock Quick-Lock Quick-Lock 6750055 Collar Square Square Square Square Square 6750022 Description Pacific Rim Dutton-Lainson Dutton-Lainson Shebly Dutton-Lainson JACKS, COUPLERS & WINCHES Part# 6750522 6750041 6750043 6750207 6750042 6750020 2" Ball Bolt-On Straight Tongue Couplers Finish Oily Oily Zinc Oily Zinc Zinc Oily Oily Painted Zinc Zinc Zinc Oily Capacity 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 5K 5K Latch Low-Pro Fas-Lok® Low-Pro Low-Pro Fas-Lok® Quick-Lock Low-Pro Fas-Lok® Low-Pro Low-Pro Low-Pro Low-Pro Low-Pro Collar Square Square Square Square Square Square Square Square Square Square Square Square Square Description Pacific Rim Bulldog Pacific Rim Pacific Rim Bulldog Dutton-Lainson Pacific Rim Bulldog Atwood Pacific Rim Atwood Pacific Rim Pacific Rim 2" Ball Weld-On Straight Tongue Couplers Finish Painted Painted Painted Painted Painted Painted Capacity 5K 5K 5K 5K 7K 5K Latch Low-Pro High-Pro Low-Pro High-Pro High-Pro High-Pro Collar Square Round Square Square Square Round Description Atwood Bulldog Collar-Lok™ Coupler Atwood Bulldog Collar-Lok™ Coupler Bulldog Collar-Lok™ Coupler Bulldog Collar-Lok™ Coupler 2-5/16" Ball Weld-On Straight Tongue Couplers Part# 6750028 6750026 6750029 Ref # 4B2 80131 4B4 Tongue Size 2-1/4" 3" 3" Finish Painted Painted Painted Capacity 12.5K 8-1/2K 12.5K Latch High-Pro Ring-Latch High-Pro Collar Round Square Square Description Bulldog Collar-Lok™ Coupler Atwood Bulldog Collar-Lok™ Coupler Need help finding your correct parts? Call any of our 6 locations today! East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 WWW.TEXTRAIL.COM Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 D-2 Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143 Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S A-FRAME COUPLERS A B JACKS, COUPLERS & WINCHES 6750502 Part# 6750509 6750502 6750500 6750054 6750135 6750070 6750512 6750511 6750062 6750505 6750504 6750074 6750075 6750033 6750507 6750506 6750508 6750008 6750178 C 6750505 Ref # CA-5110-O CA-5100-B CA-5100-O 80072 88555 43805W CA-5210-B CA-5210-O 80101 CA-5200-B CA-5200-O 81911 82680 81912 CA-5400-B CA-5400-O CA-5400-Z 44314R 44150W Ball 2" 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 6750507 Tongue Size 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame A Part# 6750056 6750057 6750179 6750066 6750519 6750069 6750067 6750076 6750006 6750030 6750077 D E 6750075 6750062 A-FRAME COUPLER Finish Capacity Oily 2K Blk Pwdr 5K Oily 5K Painted 5K Painted 8K Primed 8K Blk Pwdr 8K Oily 8K Painted 7.5K Blk Pwdr 10K Oily 10K Painted 10K Painted 13K Painted 13K Blk Pwdr 14K Oily 14K Zinc 14K Painted 14K Primed 15K Latch Yoke Flip Flip Yoke Flip Wedge® Yoke Yoke Yoke Flip Flip Flip Flip Flip Flip Flip Flip Wedge® Wedge® B Ref # 2B8 2B8L 2A 3B8 CA-5190-B 3B8L 3B8L-LH 4B8 CA-5290-B 4B8L 4B8L-LH Ball 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 6750510 Type E A A E B F E E E B B B D B C C C B F Description Pacific Rim Pacific Rim Pacific Rim Atwood Atwood Fulton Cast Pacific Rim Pacific Rim Atwood Pacific Rim Pacific Rim Atwood Atwood Under mount Atwood Pacific Rim Pacific Rim Pacific Rim Bulldog Fulton Cast Type B A A B C A A B C A A Description Bulldog Bulldog Bulldog Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole C Forged Collar-Style A-Frame Couplers Tongue Size Finish Capacity Latch 50° A-Frame Primed 5K Hi-Pro 50° A-Frame Primed 5K Low-Pro 50° A-Frame Primed 5K Low-Pro 50° A-Frame Primed 7K Hi-Pro 50° A-Frame Blk Pwdr 7K Low-Pro 50° A-Frame Primed 7K Low-Pro 50° A-Frame Primed 7K Low-Pro 50° A-Frame Primed 12.5K Hi-Pro 50° A-Frame Blk Pwdr 12.5K Low-Pro 50° A-Frame Primed 12.5K Low-Pro 50° A-Frame Primed 12.5K Low-Pro WWW.TEXTRAIL.COM F D-3 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S Adjustable Couplers, Clevises & Pintle Eyes 6750061 6750027 6750010 6750563 8550027 8550050 JACKS, COUPLERS & WINCHES Adjustable Couplers, Clevises & Pintle Eyes Part# Ref # Holes Length Finish Capacity 6750131 PS-AC01F 4 7-1/2" Oily 24K Weld-On 3-Position Channel Bracket for Adjustable Couplers Type Description 6750132 PS-AC02F 6 11-1/2" Oily 24K Weld-On 5-Position Channel Bracket for Adjustable Couplers 7030001 B9020 5/8"-11 4/12" - - Grade 8 Hardware Kit for Adjustable Couplers 2ea Nuts & Bolts Part# Ref # Ball Finish Capacity Latch Bracket* Bolts* 6750061 AH3 1-7/8"-2" Oily 7K Nut Ring No No Buyers Adjustable Coupler Description 6750064 3B6M 2" Primed 7K Pin Collar No Yes Bulldog Adjustable Coupler 6750200 1040 2" Primed 7K Pin Collar Yes Yes Bulldog Coupler with 4-hole Brkt 6750201 1040XL 2" Primed 7K Pin Collar Yes Yes Bulldog Coupler with 6-hole Brkt 6750563 CTA-400 2-5/16" Blk Pwdr Coat 14K Flip No Yes Pacific Rim Adjustable Coupler 6750195 A256C0300 2-5/16" Oily 14K Wedge® No Yes Bulldog Adjustable Coupler 6750010 A256C0317 2-5/16" Primed 14K Wedge® No Yes Bulldog Adjustable Coupler 6750027 4B6M 2-5/16" Primed 12.5K Pin Collar No Yes Bulldog Adjustable Coupler 6750202 4B6MCB4 2-5/16" Primed 12.5K Pin Collar Yes Yes Bulldog Coupler with 4-hole Brkt 6750203 4B6MCB6 2-5/16" Primed 12.5K Pin Collar Yes Yes Bulldog Coupler with 6-hole Brkt 6750013 91035 2-5/16" Primed 12.5K Pin Collar No No Buyers Adjustable Coupler 6750538 CTA-290 2-5/16" Blk Pwdr Coat 12.5K Pin Collar No Yes Pacific Rim Adjustable Coupler 6750543 1051 2-5/16" Blk Pwdr Coat 12K Pin Collar Yes Yes Pacific Rim Coupler with 4-hole Brkt 6750544 1051XL 2-5/16" Blk Pwdr Coat 12K Pin Collar Yes Yes Pacific Rim Coupler with 6-hole Brkt 6750134 90100 2-5/16" Painted 12K Zinc Ring Yes Yes Buyers Coupler with 6-Hole Brkt 6750513 CTA-14CB6 2-5/16" Blk Pwdr Coat 14K Flip Yes Yes Pacific Rim Coupler with 6-hole Brkt 6750540 CTA-190 2" Blk Pwdr Coat 7K Flip No Yes Pacific Rim Adjustable Coupler 6750083 91555 2-5/16" Oily 15K Flip Yes Yes Buyers Coupler with 6-Hole Brkt Part# Ref # Eye Finish Capacity Bracket* Bolts* 8550036 18128 3" Oily 12K Yes Yes Adjustable Pintle Eye with 4-hole Brkt 8550037 18128XL 3" Oily 12K Yes Yes Adjustable Pintle Eye with 6-hole Brkt 8550027 16137 3" Oily 14K No No Adjustable Pintle Ring / Drawbar 8850001 E-66 3" Oily 20K No No Adjustable Pintle Ring / Drawbar Part# Ref # Pin Hole Finish Capacity Bracket* Bolts* 8550050 CL20XL8 1" Oily 20K Yes Yes Adjustable Clevis with 6-hole Brkt 8550052 9095 3/4" Oily 12K Yes Yes Adjustable Clevis with 4-hole Brkt 8550053 9095XL 3/4" Oily 12K Yes Yes Adjustable Clevis with 6-hole Brkt 8550013 1807800 1" Oily 20K No No Adjustable Clevis 8550051 0897900 3/4" Oily 12K No No Adjustable Clevis Description Description * Included with Part Number WWW.TEXTRAIL.COM D-4 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S GOOSENECK COUPLERS 6750051 JACKS, COUPLERS & WINCHES 6750039 6750050 6750037 Part# Ref # Capacity Type Pin / Screw 6750035 6750005 6750531 6750016 6750532 6750039 6750037 6750534 6750036 6750535 6750192 6750002 6750533 6750208 6750536 6750051 6750050 6750017 6750124 6750118 287620300 GCPN-20000 GC-20000 287740300 GC-24000 LL2516ST GN24 GCPN-25000 289600300 GCSQ-25000 289500300 GCPN-30000 GC-30000 28900 20K 20K 20K 20K 24K 25k 24K 25K 25K 25K 30K 30K 30K 30K 30K 30K 30K - Round Round Round Round Square Round Square Square Round Round Round Square Square Square - No Pin Set Screws Set Screws Pin Pin Pin Pin Pin Pin Set Screws Pin Pin Pin - GCSQTW-30000 GN2516 LL2516BH SM2516M36 23108 K1-P 6750536 6750532 6750035 6750208 Gooseneck Couplers O.D. Adjust Extended Description Height 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4" - 8" 8" 8" 10" 8" 8" 8" 8" 8" 8" 7" 7" 10" - 37-1/4" 38" 38" 38" 37-1/4" 40" 40" 37-1/4" 37-1/4" 38" 39" 39" 38" - Bulldog Gooseneck with Cap Pacific Rim Gooseneck 0.215" Thick with Pin Pacific Rim Gooseneck 0.215" Thick with Set Screws Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Set Screws TEMCO Gooseneck Autolock Top Wind with Pin Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.300" Thick with Pin Pacific Rim Gooseneck 0.300" Thick with Set Screws Bulldog Gooseneck Top Wind with Pin Pacific Rim Gooseneck 0.275" Thick with Pin TEMCO Gooseneck Head Kit with K1 Manual Pin Lock TEMCO Gooseneck Top Wind TEMCO Gooseneck Jamb Nut Bulldog Gooseneck Set Screw TEMCO 1/2" Pin for Gooseneck Head Gooseneck King Pin Adapters 7150033 Part# Ref # Size Type With Skid Plate 7350486 7150033 6750137 7150057 GN5 15085 15086 15087 4" 4" 4" 4" Square Round Round Round Yes Yes Yes Yes Description Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck Extender Part# Ref # I.D. Type 6750206 4200 4" Round Capacity Description 24K 10” Gooseneck Extender Gooseneck King Pins Part# Ref # Size Type 7150016 7150018 KP20038 KP20050 2" 2" Weld-On Weld-On Description Part# Ref # Ball 6750040 75074 2-5/16" 25K Atwood Flat Mount Coupler 2-5/16” 20K Bulldog Flat Mount Coupler King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate Flat Mount Couplers 6750040 6750009 6750009 44200-0317 WWW.TEXTRAIL.COM Capacity Description D-5 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S DRAW BARS & NOSE PLATES Part# Ref # Capacity Section Holes I.D. Mounting Hole Size Finish 8550004 BDB125015 42K 1-1/2" 4 2-1/2" - Blk Pwdr Coat Forged Drawbar 8550006 BDB1385 60K 1-5/8" 4 3" 25/32" Blk Pwdr Coat Heavy Duty Forged Drawbar 8550047 BDB1394 90K 1-5/8" 4 3" 57/64" Blk Pwdr Coat Heavy Duty Forged Drawbar 8550008 BDB12503 15K 1-1/2" - 2-1/2" - Plain Forged Alloy Steel Drawbar with Washer, Nut & Pin 8550038 BDB12492H 45K 1-5/8" - 3" - Plain Forged Alloy Steel Drawbar with Washer, Nut & Pin 8550007 LW10 10K 1" - 2-1/2" - Plain C1020 Steel Forged Drawbar 8550045 TNP716750 - - 8 - 21/32" Blk Pwdr Coat 3/4" Thick Trailer Nose Plate for 8550004 8550046 TNP716100 - - 8 - 25/32" Blk Pwdr Coat 1" Thick Trailer Nose Plate for 8550006 & 8550047 Description Coupler Repair Parts Part# 6750098 Ref # Description CT-3000-RK Pacific Rim 2" Straight Coupler Latch Repair Kit 6750097 CA-5100-RK Pacific Rim 2" A-Frame Coupler Latch Repair Kit 7030047 24200 Bulldog 2" & 2-5/16" Hi-Profile Coupler Repair Kit (includes handle, pin & retainer) 6750114 560801 Fulton Hand Wheel Coupler Repair Kit 6750111 600801 Fulton Fas-Lok® 5K Coupler Repair Kit 6750015 15775 Atwood 2" Yoke Style Coupler Repair Kit 6250123 88551 Atwood 2" Coupler Repair Kit 6750221 15774 Atwood 2-5/16" Coupler Repair Kit 6750112 - 3750118 GN-2516 Coupler Pin K-1 Lock. Replacment for 6750051 (See page D-5) 3750119 025230 Coupler Safety Pin Fas-Lok® w/pull ring 6750120 0252010201 Coupler Snapper Pin 5/16 x 2-3/4” for Low-Pro Coupler w/ Chain 6750186 0233060301 Coupler Pin Gooseneck Pull Pin Assembly 3/4 load bearing pin 6750210 1542S01 6750112 Coupler Latch Kit Fas-Lok®. for Class II Coupler Coupler Latch Kit GN24 Gooseneck Coupler Head 6750118 WWW.TEXTRAIL.COM 6750120 D-6 6750210 2010 Copyright by TexTrail, Inc. JACKS, COUPLERS & WINCHES Draw Bars & Nose Plates J AC K S , CO U P L E R S & W I N C H E S MARINE JACKS 7950231 7950519 7950232 7950266 7950038 7950084 7950228 7950518 Bolt-On Side Wind Marine Jacks JACKS, COUPLERS & WINCHES Part# Ref # 7950229 141005 7950515 MJ1200B 7950516 MJ1200BBX 7950038 XP10 7950084 XP15 7950228 XPD15L 7950266 MJ1500B 7950518 MJ1500BDWL 7950231 141302 7950232 141304 7950089 TJ503 7950083 87535 Travel 10" 10" 10" 10" 12" 10" 12" 10" 10" 10" 10" Retracted Height 14.5" 12.7" 12.7" 12.75" 12.75" 12.75" 12.7" 12.5" 12.75" 7.80" Extended Height 23.25" 23.25" 22.75" 22.75" 24.75" 25.25" 25.25" 22.75" 18.10" Clearance 4.5" 10.5" 12.5" 10.50" 8.70" Pull Pin 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 3/8" Caster Capacity Mounting 1 - 6" 1 - 6" 1 - 6" 1 - 6" 1 - 8" 2- 6" 1 - 8" 2 - 6" 1 - 7" 1 - 7" 1 - 6" 1 - 6" 0.4K 1.2K 1.2K 1.2K 1.5K 1.5K 1.5K 1.5K 1.6K 1.6K 0.8K 0.8K Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" 3" x 3" or 4" 3" x 3" or 4" Up to 3" x 5" Up to 3" x 5" Description Fulton Swivel Trailer Stand Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack - Boxed Fulton Swing Away Jack Fulton HP Swivel Swing Away Jack Fulton HP Swivel Swing Away Jack Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack Fulton F2 Series Jack Twin Track Fulton F2 Series Jack Wide Track Fulton S Series Marine Zinc Jack Atwood Zinc Jack less mounting bracket Weld-On Side Wind Marine Jacks 7950556 Part# Ref # 7950235 TJ1222 7950265 MJ-1500W 7950556 HD2500 7950539 MJSQ-2500B Travel 15" 10" 28" Retracted Height 11" 12.7" 7" 7" Extended Height 26" 25.25" 35.5" 25.25" 7950539 Clearance 19.25" 19" - Pull Pin 1/2" 9/16" 1/2" Caster Capacity Mounting 1 - 6" 1 - 8" Foot Foot 1K 1.5K 2.5K 2.5K Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Description Fulton Fixed Mount Jack No Hardware Pacific Rim Swing Away Jack Fulton Fixed Mount Heavy Duty Square Jack Pacific Rim Heavy Duty Square Flip-Up Jack Part# Ref # Description 7950300 88-00-6500 Fastway Flip Jack Foot (Fits 2-1/4” Jack) WWW.TEXTRAIL.COM D-7 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S A-FRAME JACKS 7950159 7950019 7950056 7950210 7950061 7950501 7950497 7950503 Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning. Part# Ref # Capacity A B C D Handle Finish Description 155300 Top Wind Primed Bulldog with removable steel wheel* 7950055 1K 27” 12” 17” 15” 7950039 80511 2.5K 36.38”*** 10.12” 26.25”*** 10” per minute - Poly Cover / Paint Atwood Standard 12V Power Jack 7950040 80515 2.5K 36.38”*** 10.12” 26.25”*** 10” per minute Override Side Poly Cover / Paint Atwood Deluxe 12V Power Jack 7950045 87510 2K 24.90” 8.40” 16.50” 14” Side Wind Painted Poly Cover / Paint Atwood less foot / caster 7950159 80530 3.5K 36.38”*** 10.12” 26.25”*** 15” per minute Override Side 7950061 7950057 7950043 7950054 7950056 7950188 7950195 80391 5K 2K 2K 2K 2K 2K 2K 21.60” 22.20” 22.40” 22.50” 23.80” 20.40” 23.20” 10.90” 9” 8.40” 7.5” 8.80” 5.40” 8.20” 10.70” 13.20” 13” 17” 12.20” 16” 12.20” 14” 15” 14” 15” 15” 15” 15” Top Wind Painted Atwood less foot / wheel Top Wind Painted Atwood less foot / wheel Top Wind Zinc Top Wind Primed Bulldog with welded disc foot Top Wind Primed Bulldog less base / wheel* Top Wind Primed Bulldog less base / wheel* Top Wind Primed Bulldog less base / wheel* ** 80401 155028 155100 155022 155033 155042** Atwood Heavy Duty 12V Power Jack Fulton with wheel 7950222 155154** 2K 26.90” 11.90” 19” 15” Side Wind Primed Bulldog with removable poly wheel* ** 7950019 7950193 7950210 175000 5K 5K 2K 27.60” 25.30” 22.50” 12.60” 10.30” 8.50” 12.40” 10.20” 14” 15” 15” 15” Top Wind Painted Eclipse less foot base Top Wind Primed Bulldog less base / wheel* 155032 5792Z Side Wind Zinc Shelby less base / wheel Pacific Rim less base / wheel 7950497 TJA2000B 2K 20” 8” 12” 14” Top Wind Powder Coated 7950501 TJA2000Z 2K 20” 8” 12” 14” Top Wind Zinc Pacific Rim less base / wheel 7950502 TJA2001B 2K 20” 5” 15” 14” Top Wind Powder Coated Pacific Rim less base / wheel 7950503 TJA2000S 2K 25” 9” 16” 14.5” Side Wind Powder Coated Pacific Rim less base / wheel 7950504 TJA2002B 2K 23” 9” 14” 15” Top Wind Powder Coated Pacific Rim less base / wheel 7950505 TJA5000B 5K 20” 10.50” 9.50” 14” Top Wind Powder Coated Pacific Rim less base / wheel 7950239 TJA2000HD Top Wind Crank for up to 5K Jacks black * Equipped with brackets for weld-on or bolt-on application. ** Obsolete. Available until inventory is exhausted. ***Note: 11-1/2” motor height is added to Power Jack Heights. WWW.TEXTRAIL.COM D-8 2010 Copyright by TexTrail, Inc. JACKS, COUPLERS & WINCHES Atwood’s Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning. J AC K S , CO U P L E R S & W I N C H E S ROUND TUBE PIPE MOUNT SWIVEL JACKS JACKS, COUPLERS & WINCHES 7950067 Part# 7950540 7950044 7950048 7950046 7950525 7950050 7950527 7950066 7950532 7950065 7950535 7950064 7950530 7950067 7950069 7950533 7950079 7950541 7950269 7950080 7950081 7950078 Ref # Capacity TJP2001SB 2K 158151 2K 158110 2K 158451 2K TJP2001B 2K 158452 2K TJP2002B 2K 178201 5K TJP5001SB 5K 178203 5K TJP5002SB 5K 178101 5K TJP5001B 5K 82471 5K 178151 5K TJP5002B 5K 198150 7K TJP7001SB 7K TJP7001SZ 7K 198250 7K 198100 7K 198200 7K 7950016-01 7950090 7950242 7950069 7950532 7950535 7950269 7950525 Round Tube Pipe Mount Swivel Jacks A B C D Handle Finish Pin Description 17.50” 11.25” 6.25” 10” Side Wind Painted 9/16" With pipe end, foot plate & handle 26.70” 14.50” 12.20” 15” Side Wind Primed 9/16" With pipe end, foot plate & handle 17.20” 10.80” 6.40” 15” Side Wind Primed 9/16" With pipe end, foot plate & handle 15” 11” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 15.25” 11.25” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 24.50” 14.50” 10” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 20.258” 15” 5.25” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 17.50” 10.40” 6.40” 10” Side Wind Primed 5/8" With pipe end, foot plate & handle 17.50” 11.25” 6.25” 10” Side Wind Painted 5/8" With pipe end, foot plate & handle 21.80” 15.40” 6.40” 15” Side Wind Primed 5/8" With pipe end, foot plate & handle 23.25” 16.25” 7” 15” Side Wind Painted 5/8" With pipe end, foot plate & handle 15.25” 11.25” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 15.25” 11.25” 4” 10” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 25.50” 11” 14.50” 14.70” Top Wind Painted 7/8" Less pipe end. With foot plate & handle 24.70” 14.70” 10” 15” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 20.25” 15” 5.25” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 17.40” 11” 6.40” 10” Side Wind Primed 5/8" With pipe end, foot plate & handle 18.50” 11.50” 7” 10” Side Wind Painted 5/8" With pipe end, foot plate & handle 18.50” 11.50” 7” 10” Side Wind Zinc 5/8" With pipe end, foot plate & handle 22.40” 16” 6.40” 15” Side Wind Primed 5/8" With pipe end, foot plate & handle 15.30” 10.80” 4.50” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 20.05” 15.80” 4.25” 15” Top Wind Primed 9/16" With pipe end & red knob fold-away handle * Bracket height provided. In some cases height bracket differs from clearance height. Replacement Parts Part# Ref # Description 7950129-7950131 7950162-01 7950046 7950239 7950102 WWW.TEXTRAIL.COM 7950105 7950248 7950108 D-9 7950242 TJPB-HD Bulldog 150-160-170/RAM Red Top Wind Handle 7950108 500148 Bulldog 190 Black Top Wind Jack Handle 7950102 500171 Bulldog 190 Black Side Wind Jack Handle 0.85" RAD 7950097 500256 Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K 7950096 500105 Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD 7950105 500244 Bulldog Detachable 5K Jack Foot 7950090 500245 Bulldog Detachable 0.8K Poly Jack Caster 7950512 JC101 Pacific Rim Detachable 1.2K Poly Jack Caster 7950013 017125 Bulldog Detachable 1K Steel Jack Caster 7950129 500238 5/8" Pin Weld-On Female Pipe Jack Mount 7950131 500239 9/16" Pin Weld-On Male Pipe Jack Mount 7950130 500240 5/8" Pin Weld-On Male Pipe Jack Mount 7950021 82500 7/8" Pin Weld-On Male Pipe Jack Mount 7950239 TJA2000HD Pacific Rim Black Top Wind Jack Handle 7950242 TJPD-HD Pacific Rim Red Top Wind Jack Knob 7950248 PLGPIN-12 Pacific Rim 1/2" Swivel Jack Pin Kit 7950162-01 Jack Foot Pin 9/16” x 3-1/2” w/Chain for HB & RAM 7950016-01 Jack Pin 9/16” x 3-1/2” w/Chain for Swivel HB & RAM 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S SQUARE TUBE SWIVEL JACKS 7950077 7950271 7950236 7950237 7950181 Square Tube Round Pipe Mount Swivel Jacks Part# Ref # Capacity Travel Retracted Height Extended Height Clearance * Handle Finish Description 7950249 195306 5K 15" 15.20" 30.20" 7" Top Wind Primed Round Mount Fixed Leg Jack with pipe end, foot plate & handle 7950236 TJDP-5000FLB 5K 15" 24" 39" *15.20" Top Wind Painted Round Mount Fixed Leg Jack with pipe end, foot plate & handle 7950253 195356 5K 15" 15.10" 30.10" 9.25" Side Wind Primed Round Mount Fixed Leg Jack with pipe end, foot plate & handle 7950237 TJDP-5000SFLB 5K 15" 24" 39" *15.20" Side Wind Painted Round Mount Fixed Leg Jack with pipe end, foot plate & handle 7950271 190705 8K 10" 11.41" 21.41" 4.25" Top Wind Primed Round Mount Fixed Leg Jack with pipe end, foot plate & handle Extended Height Clearance * Handle Finish Description Square Tube Square Pipe Mount Swivel Jacks Part# Ref # Capacity Travel Retracted Height 7950254 195312 5K 15" 15.20" 30.20" 7" Top Wind Primed Square Mount Fixed Leg Jack with pipe end, foot plate & handle 7950258 195362 5K 15" 15.10" 30.10" 9.25" Side Wind Primed Square Mount Fixed Leg Jack with pipe end, foot plate & handle Direct Weld - Square Tube Square Pipe Mount Jacks Part# Ref # Capacity Travel Retracted Height Extended Height Clearance * Handle Finish Description 7950077 SWL190DL 8K 15" 25.06" 53.56" - Side Wind Primed Square Mount Drop Leg Jack with pipe end, foot plate & handle 7950076 TWL190DL 8K 15" 22.66" 51.41" - Top Wind Primed Square Mount Drop Leg Jack with pipe end, foot plate & handle 7950238 TJD5000 5K 15" 24.50" 39.50" - Top Wind Painted Square Mount Drop Leg Jack with pipe end, foot plate & handle 7950543 TJD5000S 5K 15" 24.50" 39.50" - Side Wind Painted Square Mount Drop Leg Jack with pipe end, foot plate & handle 7950181 TJD7000 8K 15" 23.50" 38.50" - Top Wind Painted Square Mount Drop Leg Jack with pipe end, foot plate & handle 7950182 TJD7000S 8K 15" 23.50" 38.50" - Side Wind Painted Square Mount Drop Leg Jack with pipe end, foot plate & handle * Bracket height provided. In some cases height bracket differs from clearance height. WWW.TEXTRAIL.COM D-10 2010 Copyright by TexTrail, Inc. JACKS, COUPLERS & WINCHES 7950253 J AC K S , CO U P L E R S & W I N C H E S JACKS CONTINUED Weld-On Retaining Ring Swivel Jacks 7950047 Part# Ref # Capacity Travel Retracted Height Extended Height Clearance Handle Finish Pin Description 7950047 151401 2K 10" 11" 21" 4" Top Wind Primed 1/2" Weld-On Swivel Jack 7950049 151101 2K 10" 11" 21" 6.40" Side Wind Primed 1/2" Weld-On Swivel Jack 7950051 151421 2K 15" 14.50" 29.50" 10" Top Wind Primed 1/2" Weld-On Swivel Jack 7950062 171401 5K 10" 11.25" 21.25" 4" Top Wind Primed 1/2" Weld-On Swivel Jack 7950063 171412 5K 15" 14.50" 29.50" 10" Top Wind Primed 1/2" Weld-On Swivel Jack JACKS, COUPLERS & WINCHES Electric Jacks 7950159 Part# Ref # Capacity Travel Retracted Height Extended Height Clearance Handle Finish 7950158 80236 1.5K 10" per minute 24.88" 39.25" 14.75" - Poly Cover / Paint Atwood Lightweight 12V Power Jack 7950039 80511 2.5K 10" per minute 24.88" 39.25" 14.75" - Poly Cover / Paint Atwood Standard 12V Power Jack 7950040 80515 2.5K 10" per minute 24.88" 39.25" 14.75" Override Side Poly Cover / Paint Atwood Deluxe 12V Power Jack 7950159 80530 3.5K 15" per minute 24.88" 39.25" 14.75" Override Side Poly Cover / Paint Atwood Heavy Duty 12V Power Jack Description Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning. Retaining Ring and Bolt-On Side Wind Swivel Jacks - Up to 3" x 5" Mounting 7950228 Part# Ref # Travel Retracted Height Extended Height Clearance Pin Caster Capacity 7950229 141005 - 14.5" - 4.5" 3/8" 1 - 6" 0.4K Fulton Swivel Trailer Stand 7950089 TJ503 10" 12.75" 22.75" 10.50" 3/8" 1 - 6" 0.8K Fulton S Series Marine Zinc Jack 7950083 87535 10" 7.80" 18.10" 8.70" 1 - 6" 0.8K Atwood Zinc Jack less mounting bracket 7950515 MJ1200B 10" 12.7" 23.25" - 1/2" 1 - 6" 1.2K Pacific Rim Swing Away Jack 7950516 MJ1200BBX 10" 12.7" 23.25" - 1/2" 1 - 6" 1.2K Pacific Rim Swing Away Jack - Boxed 7950038 10" 12.75" 22.75" 10.5" 1/2" 1 - 6" 1.2K Fulton Swing Away Jack XP10 Description 7950084 XP15 10" 12.75" 22.75" 12.5" 1/2" 1 - 8" 1.5K Fulton HP Swivel Swing Away Jack 7950266 MJ1500B 10" 12.7" 25.25" - 1/2" 1 - 8" 1.5K Pacific Rim Swing Away Jack 7950228 XPD15L 12" 12.75" 24.75" - 1/2" 2- 6" 1.5K Fulton HP Swivel Swing Away Jack 7950518 MJ1500BDWL 12" 12.5" 25.25" - 1/2" 2 - 6" 1.5K Pacific Rim Swing Away Jack 7950231 141302 10" - - - 9/16" 1 - 7" 1.6K Fulton F2 Series Jack Twin Track* 7950232 141304 10" - - - 9/16" 1 - 7" 1.6K Fulton F2 Series Jack Wide Track* 7950519 MJ1001B 10" 12.7" 23.25" - 1/2" 1 - 6" 1K Pacific Rim Swing Away Jack * Mounting options for this jack is 3" X 3" or 3" X 4" only. Leveling Scissor Jack 7950800 7950801 Part# Ref # Travel Retracted Height Extended Height Capacity 7950800 20036 - - - - 7950801 24009 21" 4" 24" 5K Description Hex Drive Forged Socket End Zinc Crank Black Rubber Grip Handle Weldable E-Coated RV Leveling Scissor Jack This RV Leveling Scissor Jack provides a sandwich construction bearing design to assist in screw operation. Tooth gear design of the scissor arms ensures straight line vertical extension and retraction. Double lead thread drive engineering enables quick deployment of this jack. WWW.TEXTRAIL.COM D-11 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S HEAVY DUTY JACKS 7950562 7950148 7950030 7950022 7950255 7950256 7950250 7950209 Heavy Duty Direct Weld Drop Leg Jacks - Non Spring Return Retracted Height Extended Height Handle Included Ref # Capacity Lift 7950250 LG8700-31 12K 13.50" 24.38" 49.87" Side Wind No Side Non-Spring Return Jack 7950255 LGD700-21 20K 12" 24.38" 50.38" Side Wind No Side Non-Spring Return Jack 7950030 182415 12K 12.25" 28.60" 54.60" Side Wind No Front Non-Spring Return Jack 7950147 TJD-12000-FG2 12K 12.25" 28.60" 54.60" Side Wind Yes Front Non-Spring Return Jack Handle Pin Description 7950031 182400 12K 12.25" 27.40" 43.30" Top Wind No Side Non-Spring Return Jack 7950145 TJD-12000-RG2 12K 12.25" 27.40" 43.30" Side Wind Yes Side Non-Spring Return Jack 7950562 TJD-12000TW-R 12K 12.25" 23.50" 49" Top Wind Yes Side 7950026 182301 12K 12.25" 23.40" 49.40" Top Wind Yes 7950223 182415H 12K 12.25" 28.60" 54.60" Side Wind Yes Front Non-Spring Return Jack Kit 7950034 182400H 12K 12.25" 27.40" 43.30" Side Wind Yes Side Non-Spring Return Jack Kit Non-Spring Return Jack Non-Spring Return Jack Heavy Duty Direct Weld Drop Leg Jacks - Spring Return Part# Ref # Capacity Lift Retracted Height Extended Height Handle Handle Included Pin Description 7950209 DLPN20045SP-FG2 12K 12.25" 26.50" 38.75" Side Wind Yes Dual Spring Return Jack 7950251 LG8700-31SL 12K 13.50" 24.38" 49.87" Side Wind No Side Spring Return Jack 7950256 LGD700-21SL 20K 12" 24.38" 50.38" Side Wind No Dual Spring Return Jack 7950170 182815 12K 12.25" 28.60" 54.60" Side Wind No Front Spring Return Jack 7950148 TDJ-12000SP-FG2 12K 12.50" 28.50" 54" Side Wind Yes Front Spring Return Jack 7950022 182800 12K 12.50" 27.40" 56.60" Side Wind No Side Spring Return Jack 7950146 TDJ-12000SP-RG2 12K 12.50" 28.50" 54" Side Wind Yes Side Spring Return Jack 7950118 182815H 12K 12.25" 28.60" 54.60" Side Wind Yes Front Spring Return Jack Kit 7950224 182800H 12K 12.50" 27.40" 56.60" Side Wind Yes Side Spring Return Jack Kit Stabilizer Jack 7950023 Part# Ref # Capacity Lift Retracted Height Extended Height 7950023 82301 0.65K 6" 11.50" 17.75" 7950098 80480 Description Single Stabilizer Jack Stabilizer Handle Wheel Chocks 7040013 Part# Ref # Size Eye Handle Description 7040013 4121-8 8" Yes No Rumber Wheel Chock 7040014 4121-8-HD 8" No Yes Rumber Wheel Chock EZ Jack 9750001 Part# Ref # Capacity Finish 9750001 EZ-JACK 20K Aluminum Description Heavy Duty Cast EZ Jack See Page C-8 for Tandem Wheel Chocks WWW.TEXTRAIL.COM D-12 2010 Copyright by TexTrail, Inc. JACKS, COUPLERS & WINCHES Part# J AC K S , CO U P L E R S & W I N C H E S JACKS, COUPLERS & WINCHES HEAVY DUTY JACKS CONTINUED 7950042 7950041 7950213 7950241 Heavy Duty Direct Weld Drop Leg Jacks Part# Ref # Static Load Lift Travel / Drop Capacity Retracted Height Handle Included 7950212 LG4700-30 50K 25K 13.50" / 12" 29.87" Yes 7950042 LG4700-31 25K 7950041 LG4700-32 25K 6.5K 13.50" / 12" 26.75" No 25K 13.50" / 12" 26.75" No 7950213 LG4001-70 7950240 LG4001-71 140K 50K 17" 31.18" Yes 70K 50K 17" 31.18" No 7950241 LG4001-72 70K 50K 17" 31.18" No Speed Description Set 51000 Landing Gear w/ Drop Section & Cross Pipe Single LH 51000 Landing Gear with Drop Section Two RH 51000 Landing Gear with Drop Section Set 51000 Landing Gear with Cross Pipe Single LH 51000 Landing Gear Two RH 51000 Landing Gear Equalizer Systems Stop cranking and let Equalizer Systems do the work for you. Equalizer Systems is #1 in the Horse Trailer industry, providing the most advanced lifting systems around. 7950132 EL-PAC1 5K Single Power Lift System The El-Pac 1 is capable of lifting 5,000 lbs. of jack weight and is used on living quarter trailers up to 28' on the floor. This system lifts 8 inches per minute under full load. 7950133 7950132 7950133 EL-PAC2 6.5K Two Power Lift System Requires 5 inches of width clearance to mount. Capable of lifting 6,500 lbs. of jack weight, and used on living quarter trailers up to 32' on the floor. This system lifts 8 inches per minute under full load. Hydraulic Jack 7950318 7950318 SJX-1200 Fastest hydraulic jack for nearly any trailer design and environment. 10,000 lbs lift weight. Fully extends in 8 seconds. Large base w/handle ensures solid footing. Pull pin cam for easy operation. All Stillwell jacks feature a 2-year warranty! SJP-102 Features a heavy duty, customized design. lift to 10,000 lbs in 15 seconds -all w/ease of 2 button remote pendant (included). 3,200 PSI single acting pump. 12V heavy duty start solenoid. 12V heavy duty 4.5” DC electric motor. 3QT reservoir w/120-mesh inlet strainer. Weight: 27lbs. 7950319 7950319 7950325 20K Tandem Hudraulic Jack Set-Single Action Pump Square 25” Ext. 12v power up and power dwn. 7950338 TNDM APPLICATION HOSE ASSY IS REQUIRED (WOULD BE BOX 4 OF 4) WHEN SOLD WITH 7950325. CUSTOMER MAY OPT TO PURCHASE HOSE ASSY LOCALLY. *** 7950325 IS A THREE BOX SHIP *** 7950338 20k Tandem Hydraulic Jack Set HOSE ASSEMBLY CONSIST OF THE FOLLOWING: * (2-EA) 6’ HYDRUALIC HOSES (7950335), * (2-EA) 3/8” L-FITTINGS (7950337) *(1-EA) 3/8” T-FITTING (7950336) Dropleg Jack & Landing Gear Accessories 7950260 7950168 7950092 WWW.TEXTRAIL.COM 7950091 D-13 Part# Ref # 5350132 CP42 Description Crosspipe 1"ID x 46"L x SC40 Crosspipe 1"OD x 68"L 7950260 LG0094 7950092 LG0083-03 Jack Crank 18"L 13.5 Radius 7950168 TJD1200C Crank Hanger Clip 7950091 TJD1200H Jack Crank 6” L 13.5 Radius 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S 7950261 Ref # 161 162 165 167 169 18006 18007 18520 7950157 7950114 7950105 7950108 7950242 7950239 7950092 Capacity 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K Part# 7950129 7950130 7950021 7950131 7950226 7950102 7950108 7950096 7950090 7950013 7950157 7950097 7950168 5350132 7950260 7950092 7950091 7950244 7950509 7950508 7950510 7950075 7950247 7950248 7950243 7950239 7950513 7950512 7950248 7950242 7950113 7950114 7950016 7950514 7950018 7950070 7950163 7950074 7950071 Rack Posts and Gearboxes Application Description Weld-On Gear Box Bolt-On Gear Box Weld / Bolt Gear Box Weld / Bolt Gear Box T Swivel Bolt-On Gear Box for Rectangular Tongue Rack Post with 6" Steel Wheel Rack Post with 6" Poly Wheel Rack Post with Disc Foot Jack Accessories Ref # Description 500238 5/8" Pin Weld-On Female Pipe Jack Mount 500240 5/8" Pin Weld-On Male Pipe Jack Mount 82500 7/8" Pin Weld-On Male Pipe Jack Mount 500239 9/16" Pin Weld-On Male Pipe Jack Mount TJD-7000-HD Bulldog & Pacific Rim Up to 8K Red Top Wind Jack Knob 500171 Bulldog 190 Black Side Wind Jack Handle 0.85" RAD 500148 Bulldog 190 Black Top Wind Jack Handle 500105 Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD 500245 Bulldog Detachable 0.8K Poly Jack Caster 017125 Bulldog Detachable 1K Steel Jack Caster 500178 Bulldog Pin Kit 1/2" for 150-160-170 Series Jacks 500256 Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K TJD1200C Crank Hanger Clip CP42 Crosspipe 1"ID x 46"L x SC40 LG0094 Crosspipe 1"OD x 68"L LG0083-03 Jack Crank 12"L TJD1200H Jack Crank 13-1/2" JF-99 Jack Foot Bolt-On for 2" Jacks JF-100-B Jack Foot with Hardware for 2" Jacks 1.7" Tall JF-100-Z Jack Foot with Hardware for 2" Jacks 1.7" Tall Zinc JF-101 Jack Foot with Hardware for 2" Jacks 8.5" Tall TJD-7000-FT Jack Leg for 7K Jacks MJ-1000B-MBB Marine Jack Mounting Kit PLGPIN-12 Pacific Rim 1/2" Swivel Jack Pin Kit MJ-1000B-WL Pacific Rim Black 6" Poly Wheel with Nut, Bolt & Spacer TJA2000HD Pacific Rim Black Top Wind Jack Handle JC-102 Pacific Rim Detachable 1.2K Poly Jack Caster JC101 Pacific Rim Detachable 1.2K Poly Jack Caster PLGPIN-12 Pacific Rim Pin Kit 1/2" for Swivel Jacks TJPD-HD Pacific Rim Red Top Wind Jack Knob 500231 Pull Pin 5/8" x 3.5" with Chain for Bulldog 170 Series Side Wind Jacks 500232 Pull Pin 5/8" x 4.25" with Chain for Bulldog 190 Series Jacks Pull Pin 9/16" X 3.5" with Chain for Pacific Rim Pipe Mount and Bulldog 150 & 170 Series Top Wind Jacks 500243 JSP-100 Support Plate for 2K & 5K Jacks 2.29" Hole Type L-Bracket L-Bracket A-Frame L-Bracket Up To 3x5 - WWW.TEXTRAIL.COM D-14 2010 Copyright by TexTrail, Inc. JACKS, COUPLERS & WINCHES Part# 7950070 7950163 7950074 7950072 7950071 7950119 7950261 7950018 7950119 J AC K S , CO U P L E R S & W I N C H E S WINCHES JACKS, COUPLERS & WINCHES Single Speed Strap / Rope Winches Drum Capacity Part# Ref # Capacity Gear Ratchet 9850015 9850017 9850014 T600 0.6K 1.5K 1.8K Ratio 3.1:1 4.1:1 5.1:1 Style Rope Two-Way 36' x 1/4" Two-Way 30' x 5/16" Two-Way 20' x 7/16" T1500 T1801 Strap / Rope Handle Description Included No No No Length 6" 8" Fulton Fulton S Series Hand Winch Fulton S Series Hand Winch Fulton S Series Hand Winch Strap / Rope / Handle Description Strap 15' x 2" 20' x 2" 20' x 2" Two Speed Strap / Rope / Cable Winches Part# Ref # Capacity Gear Ratchet Drum Capacity Ratio Style Rope Strap Cable Cable Included Length 9850019 T2005 0101 2K 4.1:1 & 9.8:1 Two-Way with Neutral 20' x 7/16" N/A N/A No 10" 9850063 K1550 0301 1.5K 5.1:1 Auto Brake N/A N/A 70' x 1/4" No 11" 9850032 T2605 0101 2.6K 9850020 T3205B 3.2K 9850056 T3205 0101 3.2K 9250015 9850018 WSP12 0100 1.8K 2.6K WS20 0200 5.1:1 & Two-Way N/A No N/A 12.2:1 with Neutral 24' x 7/16" 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 2" x 12' Winch Strap with Hook and Loop Nylon Fulton (Pkg 6-each) 2" x 20' Winch Strap and Hook Nylon Web Fulton 10" 10" 10" Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Auto Brake Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Hand Brake Fulton High Performance Series Hand Winch Marine U-Bolts 8270007 Part # Stainless Steel, Galvanized & Yellow Zinc Plated Marine U-Bolts Ref # DIA Length Use with Description Part # Double U-Bolt Brackets Ref # Description 9000507 US1201405S 1/2" 4-5/16" 2" Stainless Steel Square U-Bolt 8270007 10190G 9000508 US1201505S 1/2" 5-5/16" 2" Stainless Steel Square U-Bolt 8270008 10191G 9000509 9000501 US1201605S US1201405G 1/2" 1/2" 6-5/16" 4-5/16" 2" 2" Stainless Steel Square U-Bolt Galvanized Square U-Bolt 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5-5/16" 6-5/16" 4-5/16 4-1/2" 5-5/16" 5-5/16" 6-5/16" 3-7/8" 4-5/16" 2" 2" 2" 3" 3" 3" 3" 3" 3" Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Yellow Zinc Square U-Bolt Yellow Zinc Square U-Bolt 9000502 9000503 9000504 9000289 9000510 9000505 9000506 9000511 9000500 US1201505G US1201605G US1301405G UB345120SS US1301505S US1301505G US1301605G UB337812SS US1301405Y WWW.TEXTRAIL.COM D-15 Galvanized Double U-Bolt Bracket 8-3/4"H x 4" W Galvanized Double U-Bolt Bracket 9-3/4"H x 4" W Marine Nuts & Washers Part # Ref # 7030202 7030199 7030203 7030204 7030069 7030062 12CHN188SS 12LW188SS 12CHNG 12LWHDG 12CHNYZ 12LWYZ Description 1/2" Stainless Steel Hex Nut 1/2" Stainless Steel Lock Washer 1/2" Galvanized Hex Nut 1/2" Galvanized Lock Washer 1/2" Yellow Zinc Hex Nut 1/2" Yellow Zinc Lock Washer 2010 Copyright by TexTrail, Inc. J AC K S , CO U P L E R S & W I N C H E S ELECTRIC WINCHES JACKS, COUPLERS & WINCHES 9850113 T-MAX ATV SERIES 3000 3K WINCH 12V, 1.1hp OUTPUT Rated Line Pull: 3,000 lbs Single-Line Motor: Permanent Magnet DC 12V with 1.1hp Output Gear Train: Differential Planetary Gear Ratio: 153:01:00 Drum Size: 1.61” Diameter Wire Rope: 31” Length, 1/4” Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Pulley Block: Included Control: Remote Switch, 11.5" lead Finish: Black w/ Yellow Ends Battery: Recommended 12amp (Includes 6mm Leads) Weight: 29 lbs (12 kgs) Overall Dimensions: (L x W x H) 12.35” x 7” x 4.2” 9850114 T-MAX ATV SERIES 4500 4.5K WINCH 12V, 1.3hp OUTPUT Rated Line Pull: 4,500 lbs Single-Line Motor: Permanent Magnet DC 12V with 1.3hp Output 120 degree clutch w/ EBT brake Gear Train: 3-Stage Planetary Gear Ratio: 148:01:00 Drum Size: 2” Diameter x 4.75” Length Wire Rope: 50' Length, .25" Diameter (6.3 mm) Fairlead: 4-Way Roller Fairlead & Pulley Block Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Control: Remote Switch, 11.5" lead Finish: Black w/ Yellow Ends Weight: 37 lbs Overall Dimensions: (L x W x H) 14.6” x 4.7” x 5.1” Recommended 650CCA, Includes 25mm Cables 9850119 T-MAX ATV SERIES 9000 11K 12V, 5.5hp OUTPUT Rated Line Pull: 11,000 lbs Single-Line Motor: 5.5hp 12V DV Series Wound Auto In-Drum Brake Gear Train: 3-Stage Planetary Gear Ratio: 265:01:00 Drum Size: 2.5” Diameter x 8.75” Length Wire Rope: 94' Length, 5/16" Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Control: Remote Switch, 11.5" lead Finish: Silver Battery: Recommended 650CCA, Includes 25mm Cables Weight: 84 lbs Overall Dimensions: (L x W x H) 22” x 6.3” x 8.1” 9850121 T-MAX ATV SERIES 12,500 12.5K WINCH 12V, 5.5hp OUTPUT Rated Line Pull: 12,500 lbs Single-Line Motor: 5.5hp 12V DV Series Wound Gear Train: Differential Planetary Gear Ratio: 172:08:01 Drum Size: 2.5” Diameter x 8.75" Length Wire Rope: 94' Length, 5/16" Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Pulley Block: Included Control: Remote Switch, 11.5" lead Finish: Silver Battery: Recommended 650CCA, Includes 25mm Cables Weight: 103 lbs Overall Dimensions: (L x W x H) 22” x 6.3” x 8.6” WWW.TEXTRAIL.COM D-16 2010 Copyright by TexTrail, Inc. TO W I N G TOWING Table Of Contents - Towing Aluminum Ball Mounts Adjustable Clevis Adjustable Tow Bar Adapter Sleeves Adapter for Receiver Tube Back-Up Assist Camera Balls Ball Mounts B&W Gooseneck Hitches B&W Adjustable Receiver / Pintle Hitch B&W RV 5th Wheel B&W Tow & Stow Receiver Hitches Bolt-On Receiver Hitches Brackets (Channel & Adjustable) Bumper Receiver Hitches Cargo Carrier Platforms Combination Pintle Hitch Convert-A-Ball® Cushioned Ball Mounts Double Ball Mount Drop Hitches Extender for Receiver Tube Fifth Wheel Hitches Folding Gooseneck Hitch Balls Gooseneck Channels Gooseneck Hitch Plates Gooseneck Hitches Heavy Duty Ball Mounts Hitch Balls Holland Mini Fifth Wheel Interchangeable Hitch Balls King Pins Mounting Rails (Folding Ball) Mounting Rails (5th Wheels) Pintle Hooks Pintle Mounts Rapid Hitch Ball Mounts Receiver Accessories Receiver Ball Mounts Receiver Locks Receiver Tubes Receiver Tube Cover RV 5th Wheels RV Towing Hitch Smooth Shank Hitch Balls Specialty Ball Mounts TexTrail Packaged Towing Products Triple Ball Mount Weight Distribution Hitches WWW.TEXTRAIL.COM E-6 E-6 E-9 E-4 E-4 E-7 E-7 E-4 E-12 E-6 E-12 E-5 E-2 E-6 E-3 E-8 E-7 E-5 E-5 E-4 E-3 E-4 E-10 E-11 E-9 E-9 E-11 E-4 E-7 E-9 E-5 E-9 & 12 E-11 E-10 E-7 E-6 E-6 E-5 thru E-7 E-4 E-7 E-3 & E-8 E-6 E-10 E-3 E-8 E-4 E-13 E-4 E-8 E-1 2010 Copyright by TexTrail, Inc. TO W I N G RECEIVER HITCHES Ref # T13301 T14301 T15301 T13332 T15006 T14332 T15208 T14108 T14008 T13008 T15008 T13208 T14208 T13042 T14081 T13270 T13336 Year 07-11 07-11 07-11 99-07 99-07 99-07 01-10 01-07 01-07 01-10 01-07 01-08 01-08 88-00 88-00 06-09 05-08 Class 3 4 5 3 5 4 5 4 4 3 5 3 4 3 4 3 3 Capacity 6-10K 10-12K 12-14K 6-10K 12-14K 10-12K 12-14K 10-12K 10-12K 6-10K 12-14K 6-10K 10-12K 6-10K 6-10K 5-5.5K 3.5K Part# 7350005 7357163 7356353 7357148 7356995 7356992 7357037 7357040 7356902 7357349 7357142 7357484 7357511 7357076 7357436 7357052 7357406 7356869 7357184 7357016 7356839 7357010 7357199 7357178 Ref # T13072 T13389 T12094 T13364 T13230 T13228 T13280 T13297 T13097 T13590 T13361 T14361 T15061 T13326 T14070 T13310 T14001 T13084 T13414 T13251 T13051 T13245 T13432 T13408 Year 04-09 04-07 96-07 08-11 05-11 05-09 87-04 04-06 98-03 97-04 02-09 02-10 03-11 2002 07-11 67-02 67-02 84-01 06-09 05-09 99-04 08-09 07-09 97-06 Class 3 3 2 3 3 3 3 3 3 3 3 4 5 3 4 3 4 3 3 3 3 3 3 3 Capacity 6-9K 3.5-4K 3.5K 0.8K 5-8K 5-7.5K 5-8K 5-6K 5-8K 5-8K 6-10K 10-12K 12-14K 5-10K 10-12K 6-10K 10-12K 5-6K 5-7.5K 5-5.5K 5-6K 5-7.5K 3.5-4K 4K Part# 7357313 7357160 7356992 7357343 Ref # T13561 T13385 T13228 T13581 Year 99-09 05-09 05-09 07-09 Class 3 3 3 3 Capacity 3.5-5K 5-6K 5-7.5K 4K Part# 7357397 7357394 7357004 7357241 7356953 7356968 7356956 Ref # T13842 T13841 T13244 T13514 T13183 T13199 T13185 Year 03-04 00-04 05-09 05-08 00-04 03-09 08-09 Class 3 3 3 3 3 3 3 Capacity 5-6K 5-6K 5-8K 4-6K 4-6K 6-10K 3.5-4K GM Receiver Hitches Make Notes Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty 6' & 8' BED Chevy / GMC Silverado / Sierra 2500 & 3500 Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Trucks Chevy / GMC Trucks 6' Bed & 8' Bed GMC Hummer H3 GM SUV (Buick, Chevy, GMC, Pontiac, Saturn) Chrysler / Dodge Jeep Receiver Hitches Make Notes Chrysler / Dodge Aspen & Durango Chrysler / Dodge Caravan, Grand Caravan & Town&Country (including Stow-N-Go) Chrysler / Dodge / Plymouth Caravan, Voyager & Town&Country (less Stow-N-Go) Chrysler / Dodge / Volkswagon Grand Caravan, Town&Country & Routan (including Stow-N-Go) Dodge Dakota Dodge Dakota Dodge Dakota Dodge Durango Dodge Durango Dodge Full Size Van (except with Factory Step Bumper) Dodge Ram Dodge Ram Dodge Ram Dodge Ram Dodge 1 Ton Truck Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Jeep Cherokee Jeep Commander Jeep Grand Cherokee Jeep Grand Cherokee Jeep Liberty Jeep Wrangler Jeep Wrangler Honda / Mitsubishi Hitches Make Notes Honda Odyssey Honda Ridgeline Mitsubishi Raider Mitsubishi Outlander Nissan Hitches Make Notes Nissan Frontier Long Bed Nissan Frontier Short Bed Nissan Frontier Nissan Xterra Nissan Xterra Nissan Titan Nissan Rogue WWW.TEXTRAIL.COM E-2 2010 Copyright by TexTrail, Inc. TOWING Part# 7357049 7357463 7357520 7357085 7357493 7357469 7357496 7356758 7357409 7357454 7357516 7356971 7357457 7356821 7357442 7357031 7357091 TO W I N G TOWING RECEIVER HITCHES CONTINUED Part# 7357367 7356833 7356917 7357295 7357280 7356779 7350648 7350574 7350300 7357052 7357406 7357481 7357127 7357136 7357424 7357139 7357151 7357133 7356764 7357421 7357490 7357475 Ref # T13650 T13049 T13112 T13550 T13540 T13019 T13085 T13053 T13055 T13310 T14001 T14360 T13352 T13357 T14044 T13360 T13365 T13355 T13014 T14041 T15004 T14355 Year 05-11 97-03 06-08 02-05 91-03 83-09 94-04 75-07 00-09 67-02 67-02 06-08 04-05 04-05 97-03 06-08 06-08 97-11 99-09 1199-09 99-09 99-11 Part# 7357208 7357232 7357025 7357070 7356761 7356965 7356950 Ref # T13445 T13509 T13256 T13323 T13013 T13198 T13180 Year 03-09 06-08 04-09 05-10 95-04 07-09 00-06 Part# 7357403 7357400 7356755 7357052 7357406 Ref # T13950 T13895 T12923 T13310 T14001 Year 62-07 97-08 62-03 67-02 67-02 Part# 7357373 7357379 Ref # T13701 T13702 Class 3 3 Part# 7350156 7350167 7350168 Ref # SBH2 E-1 E-2 GTW 3.5K 5K 5K Ford / Lincoln / Mercury Receiver Hitches Make Notes Ford / Mercury / Mazda Escape, Tribute & Mariner Ford / Lincoln Expedition & Navigator Ford Explorer Ford / Mercury Explorer & Mountaineer Ford / Mercury / Mazda Explorer, Mountaineer & Navajo Ford Ranger Ford Winstar Ford Full Size Van All (except with step bumper) Ford Full Size Van All (except with step bumper) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Ford / Lincoln F150 & Mark LT Trucks Ford F150 All Ford F150 with Damper Ford F150 & F250 Light Duty Ford / Lincoln F150 & Mark LT Trucks (Tube) Ford / Lincoln F150 & Mark LT Trucks (Round) Ford F150, F250 & F350 Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F150, F250 & F350 Toyota Hitches Class Capacity Make Notes 3 5-5.5K Toyota 4Runner 3 3.5-4K Toyota Rav4 3 5K Toyota Sienna 3 5-5.5K Toyota Tacoma 3 5-6K Toyota Tacoma 3 6-10K Toyota Tundra 3 6-10K Toyota Tundra Multi-Fit Hitches Class Capacity Notes 3 5K Ford, Chevy, GMC, Toyota, Dodge & Plymouth 2" Multi-fit 3 6K Ford, Chevy & GMC Trucks 2" Multi-fit 2 3.5K Ford, Chevy, GMC, Toyota, Dodge, Chrysler, Nissan, Jeep, Plymouth, Oldsmobile & Pontiac 1-1/4" Multi-fit 3 6-10K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) 4 10-12K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) RV Towing Hitch Capacity Notes 5-6K 2" Drop Adjustable Up To 51" Frame RV Receiver Hitch 5-6K Adjustable Up To 51" Frame RV Receiver Hitch Bumper Receiver Hitches TW Description 350 lb 2" Square Step Bumper Hitch Black Powder Coated 500 lb 4" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center 500 lb 6" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center Class 3 3 3 3 3 3 3 3 3 3 4 5 3 3 4 3 3 3 3 4 5 4 Capacity 3.5K 6-10K 5-8K 5-6K 4-6K 4-6K 4-6K 5-7.5K 5-7.5K 6-10K 10-12K 10-12K 6-10K 6-10K 10-12K 6-10K 6-10K 6-10K 6-10K 10-12K 12-14K 6-10K 7350156 7350167 7350319 Part# 7350319 7350320 7350321 7350316 7350317 7350318 7350111 Ref # E-9 E-88 E-89 E-11 E-12 E-13 E-14 GTW 2" 2" 2" 2" 2" 2" 2" WWW.TEXTRAIL.COM Long 6" 8" 10" 12" 18" 24" 36" Receiver Tubes Description Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube E-3 2010 Copyright by TexTrail, Inc. TO W I N G BALL MOUNTS Ball Mounts Part# 7350029 7350080 7350038 7350036 7350037 Ref # D-3 D-4 D-5 D-7 D-9 Finish Black Powder Black Powder Black Powder Black Powder Black Powder GTW / TW 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 5K / 500 lbs Drop 2" 2" 4" 6" 8" Rise 3/4" 3/4" 2" 4" 6" Length 8-1/4" 10-1/4" 8-1/4" 8-1/4" 8-1/4" Hole Size 1" 1" 1" 1" 1" Description Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Dual Length Ball Mounts Part# Ref # Finish GTW / TW Drop Rise Length 7350512 D-24 Black Powder 6K / 600 lbs 6" 4" 8-1/4" & 10-1/4" Hole Size 1" Description Ball 2" 2" 2" Description Ball Mount Assembly for 2" x 2" Receiver Tube Ball Mount Assembly for 2" x 2" Receiver Tube Ball Mount Assembly for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube 7350512 Ball Mount Assemblies (with Pin & Clip) Ref # D-534 D-4554 D-554 Finish Black Powder Chrome Black Powder GTW / TW 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs Drop 2" 2" 4" Rise 3/4" 3/4" 2" Length 8-1/4" 8-1/4" 8-1/4" Hole Size 1" 1" 1" 7350583 7350658 One Piece Forged Ball Mounts Part# 7350024 7350025 7350026 Ref # D-122 D-124 D-126 Finish Black Powder Black Powder Black Powder GTW / TW 12K / 1.2K 12K / 1.2K 12K / 1.2K Drop 2" 4" 6" Rise 3/4" 2" 4" Length 6” 6” 6” Hole Size 1-1/4" 1-1/4" 1-1/4" Description Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube 7350024 Heavy Duty Ball Mounts 2-1/2” Receiver Tube Ball Mounts Part# 7350689 7350028 7350690 Ref # D-2525 D-2526 D-2527 Finish Black Powder Black Powder Black Powder Part# Ref # Finish 7350604 D-2505 Black Powder Part# 7350279 7350188 Ref # D-150 D-160 Finish Black Powder Black Powder GTW / TW 10K / 1K 10K / 1K 12K 1.2K Drop 3" 5" 8" Rise 1-1/2" 3-1/2" 6-1/4" Length 9-3/4" 10" 10-1/2" Hole Size 1-1/4" 1-1/4" 1-1/4" Description Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube Adapter Sleeve Description 7350604 Converts 2-1/2" receiver tube to fit a standard 2" ball mount Double & Triple Ball Mounts GTW / TW 10K / 1K 10K / 1K Length 7" & 8-1/2" 8-1/2" Ball Size 1-7/8", 2" & 2-5/16" 2" & 2-5/16" 7350279 Description Triple Ball Mount for 2" x 2" Receiver Tube Double Ball Mount for 2" x 2" Receiver Tube 7350188 Receiver Tube Adapters & Extenders Part# Ref # Finish Adapts From 7350516 7350517 7350518 7350519 7350520 7350521 D-170 D-180 D-185 D-190 D-195 D-205 Black Powder Black Powder Black Powder Black Powder Black Powder Black Powder 2" 2" 1-1/4" 1-1/4" 2" 2" Adapts To 1-1/4” 1-1/4” 2” 2” 2” 2” WWW.TEXTRAIL.COM Extends 4” 15” 6-1/4” 10” 14” 18” Description Receiver Adapter Receiver Adapter Receiver Adapter Receiver Adapter Receiver Extender Receiver Extender E-4 7350518 7350520 7350516 2010 Copyright by TexTrail, Inc. TOWING Part# 7350583 7350658 7350584 TO W I N G TOWING ACCESSORIES 6300088 6300018 6300023 6300017 6300130 7350021 TOWING 6300099 Part# 6300099 6300098 6300130 6300127 6300017 6300023 6300018 6300088 6300132 Ref # 900B 901B 102B 105B 300B 400B 600B 004B 005B Finish Chrome Chrome Chrome Chrome Chrome Chrome Chrome Plastic Black Capacity 10K 10K 10K 10K 2K 5K 10K - Part# 7350021 7350023 Ref # AMSC2 AMSC4 Finish Black Black Capacity 10K 10K Part# 7350209 7350315 7350062 7350264 8200354 7350314 Ref# F-4 F-5 F-6 211HP Finish Zinc Zinc Zinc Zinc Chrome Zinc Part# 7350153 9990036 7350254 7350253 7350280 7350255 7350256 7350388 7350249 7350251 7350379 7350374 2866DAT F-500 Ref # 10033B 10033BB 10047B 10047BB 10033C 10037B 10037BB 10048B 10048BB 10040B 10049B 10050B Model 6 6 6 6 6 8 8 8 8 10 10 12 6300132 CONVERT-A-BALL Shank Dia Length Description 1" 2-1/4" Convert-A-Ball® Set with interchangeable 1-7/8", 2" & 2-5/16" balls. 1" 2-1/4" Convert-A-Ball® Set with interchangeable 1-7/8" & 2" balls. 1" 2-1/4" Replacement Convert-A-Ball® Shank 1" 3" Replacement Convert-A-Ball® X-Long Shank Replacement 1-7/8" Convert-A-Ball® Replacement 2" Convert-A-Ball® Replacement 2-5/16" Convert-A-Ball® Convert-A-Ball® Storage Case for 3-balls Convert-A-Ball® Shank Cover Cushioned Ball Mounts Hole Drop Description 1" 2" Convert-A-Ball® Cushioned Ball Mount 1" 4" Convert-A-Ball® Cushioned Ball Mount Hitch Pins Description 105° Bent Receiver Pin with Retaining Clip 105° Bent Receiver Pin with Retaining Clip Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins 7350314 Size 1/2" 5/8" 5/32" Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins 1/8" 1/2 - 5/8" Receiver Lock Bent Pin Class III-IV 3-5/8”L 1/2 or 5/8” Chrome 105° Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes 5/8" 10K Multi-Ball Adjustable Tow & Stow Receiver Hitches Description B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Chrome B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Model A B C Drop Rise Total Vertical Adjustment 3" 3-1/2" 6-1/2" 5" 5-1/2" 10-1/2" 7" 7-1/2" 14-1/2" 9" 9-1/2" 18-1/2" 6 8 10 12 7350254 WWW.TEXTRAIL.COM 7350253 E-5 Adjust to multiple heights, choose ball configuration, & stow away after use. 7350280 2010 Copyright by TexTrail, Inc. TO W I N G TOWING ACCESSORIES CONTINUED Part# 7350659 7350660 7350268 7350267 8550036 Part# Ref # 8550020 Eye Finish 8550036 E-63 8550037 E-64 8550027 16137 8850001 E-66 8550050 CL20XL8 8550052 9095 8550053 9095XL 8550013 1807800 8550051 0897900 3" 3" 3" 3" 1" 3/4" 3/4" 1" 3/4" Oily Oily Oily Oily Oily Oily Oily Oily Oily Part# Ref # 6750131 PS-AC01F 6750132 PS-AC02F E-23 8550020 E-24 8550030 E-241 8550021 Part# Ref # 7030001 B9020 8550026 E-230 Holes 4 6 4 4 7 Size 5/8"-11 1/2"-13 Length 7-1/2" 11-1/2" 7" 7" 13" Length 4/12" Part# 7350622 7350623 7350624 7350625 7350629 8550027 7350277 8200170 8550050 Bracket & Description Bolts* 12K Yes Adjustable Pintle Eye with 4-hole Brkt 12K Yes Adjustable Pintle Eye with 6-hole Brkt 14K No Adjustable Pintle Ring / Drawbar 20K No Adjustable Pintle Ring / Drawbar 20K Yes Adjustable Clevis with 6-hole Brkt 12K Yes Adjustable Clevis with 4-hole Brkt 12K Yes Adjustable Clevis with 6-hole Brkt 20K No Adjustable Clevis 12K No Adjustable Clevis * Included with Part Number Capacity Shank Type Description 24K Weld-On 3-Position Channel Bracket for Adjustable Couplers 24K Weld-On 5-Position Channel Bracket for Adjustable Couplers 10K 8-1/2" Bolt-On 3-Position Adjustable Pintle Mount 20K 10-1/2" Bolt-On 3-Position Adjustable Pintle Mount 30K 12-1/2" Bolt-On 5-Position Adjustable Pintle Mount Grade Description 8 Hardware Kit for Adjustable Mounts 2ea Nuts & Bolts 8 Hardware Kit for Adjustable Mounts 4ea Nuts, Washers & Bolts 10K Aluminum Rapid Hitches Part# Ref # Rise / Drop Description 7350634 DT-ALBM6400 5-1/2" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350635 DT-LBM6600 4" to 10" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350636 3424 Replacement 2" & 2-5/16" Balls 8K Aluminum Ball Mounts Ref # Rise / Drop Hole Description DT-BM4200 2” 1” 2” Receiver Aluminum Stinger DT-BM4400 4” 1” 2” Receiver Aluminum Stinger DT-BM4600 6” 1” 2” Receiver Aluminum Stinger DT-BM5200 8” 1” 2” Receiver Aluminum Stinger DT-LBM8400 10” 1” 2” Receiver Aluminum Stinger WWW.TEXTRAIL.COM Capacity E-6 2010 Copyright by TexTrail, Inc. TOWING Part# 8200170 8200221 7350266 7350377 7350375 7350376 7350277 7350446 10K Adjustable Tow & Stow Receiver Hitch / Pintle Hitch Ref # Description TS10055 B&W Adjustable Pintle Hitch with 2" Ball B&W Adjustable Pintle Hitch with 2-5/16" TS10056 Ball 10051 2" Chrome Pintle Ball 10052 2-5/16" Chrome Pintle Ball Receiver Accessories Ref # Description 50796 5/8" Chrome Receiver Deadbolt Lock T3 5/8" Chrome Receiver Deadbolt Lock TS35010 5/8" x 4-1/2" Stainless Steel Hitch Pin 35014 BW Hitch Plate Cover 10" Chrome 7350266 7350375 7350377 35012 BW Hitch Plate Cover 6" Chrome 35013 BW Hitch Plate Cover 8" Chrome 50943 BW Receiver Hitch Silencer Pad F-10 Tube Cover Formed Steel Chrome Finish TOWING TO W I N G Part# 6300045 6300047 6300026 6300068 6300070 6300082 6300015 6300078 6300067 6300076 6300086 6300079 6300191 7350396 6300081 6300031 6300085 6300074 6300193 6300063 6300065 6300061 6300062 Ref # A-15 A-16 A-2 A-18 A-19 A-4 A-38 A-33 A-34 A-20 A-90 A-5 A-7 A-39 A-21 A-6 A-35 A-36 A-43 A-41 94006 A-91 A-92 Part# 6300031-01 6300079-01 6300082-01 Ref # TTB2517 TTB2516 TTB2016 7350784 7350783 SG-22 UTK-32 Part# 7350109 Ref # 4843 Bulk Trailer Balls Rise Finish Capacity Description Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball 1" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Coarse Thread Heat Treated Nickel Chrome Trailer Ball Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 1" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 1" Raw 25K Fine Thread Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball 2” Raw 30K Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball Packaged Trailer Balls Ball Shank Length Rise Finish Capacity Description 2-5/16" 1-1/4" 2-5/8" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1" 2-1/8" Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/8" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Trailer Ball Accessories Description: Ball Mount Ball Protector Cover Universal for 1-7/8”-2-7/8” (See picture below) Description: Receiver Combination Lock. Weatherproof, set your own combination. Back-Up / Hitch Assist Camera Power: Monitor Camera Transmits Description Auxiliary/ Lighter Plug 4-Way Flat 50+ Feet Wireless 3-1/2" Color Monitor with Magnetic Base & Camera Ball 1-7/8" 1-7/8" 1-7/8" 2" 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16” 2-5/16" 3" Shank 3/4" 3/4" 1" 3/4" 3/4" 1" 1" 1" 1" 1" 1-1/4" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2” 2" 2" Length 2-1/8" 3" 2-1/8" 2-1/8" 3" 2-1/8" 2-1/4" 2-1/8" 2-1/8" 3" 2-5/8" 2-1/8" 2-1/4" 2-1/4" 3" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-3/4” 3-1/2" 3-1/2" Wireless! Part# 8550015 8550044 8550031 8550042 8550024 8550029 8550011 6300025 6300022 Ref # E-21 E-210 S15T E-19 E-20 BH82000 BH2516 E-19R E-20R Eye / Ball 2" - 3" 2" - 3" 2-3/8" - 3" 2" 2-5/16" 2” 2-5/16” 2" 2-5/16" Bolts 4 4 2 4 4 4 4 - Pintle Hooks & Combination Pintle Hitches Capacity Description Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 10K Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 30K Swivel Forged Steel Pintle Hook with Spring Cushion 30K 16K Combination Pintle Hook / 2" Chrome Ball Black Powder Coated 10K Rated Ball Combination Pintle Hook / 2-5/16" Chrome Ball Black Powder Coated 12K Rated Ball 16K Combination Pintle Hook 2” Ball 2-3 Eye 4 Bolt Flng Mount 16K Combination Pintle Hook 2-5/16” Ball 2.5-3 Eye 4 Bolt Flng Mount 16K 10K Pintle Ball Combination Replacement Ball 12K Pintle Ball Combination Replacement Ball 7350784 7350783 8550011 8550029 8550031 8550042 WWW.TEXTRAIL.COM E-7 8550015 2010 Copyright by TexTrail, Inc. TO W I N G Part# 6300145 6300060 7350115 6300106 6300110 Ref # 3434 TTBK2516 A-93 94011 94012 Ref # E-911 E-912 E-9 E-11 E-12 E-13 E-14 E-2510 Part# 7350718 Ref # E-17 Size 1-1/4" x 1-1/4" 1-1/4" x 1-1/4" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2-1/2" x 2-1/2" Capacity 5K Specialty Balls Description Smooth Shank Eye Ball 30K Ball Kit with Collar consisting of 6300106 & 6300110 5/8" x 1-1/4" Sway Control Replacement Hitch Ball 30K 2-3/16" Drop-In Machined Ball 30K 2-3/16" Ball Collar Hitchin Rods Part# Ref # 7350274 HR01C Description Magnetic Hitchin Rod Set 48" Receiver Tubing - Raw Finish Description 6" Receiver Tube 12" Receiver Tube 6" Receiver Tube 12" Receiver Tube 18" Receiver Tube with 1/2" Reinforcing Collar 24" Receiver Tube with 1/2" Reinforcing Collar 36" Receiver Tube with 1/2" Reinforcing Collar 10" Receiver Tube 7350318 7350319 7350718 Weld-On Hitch Box Description 2"ID Square Raw Finish Weld-On Hitch Box 7350683 7350684 60" x 20" Bolt-Together Cargo Carriers for 2" Receiver Hitches Part# Ref # Capacity Depth Finish Description Powder Coated Carrier with Fixed Shank 7350683 18130 0.5K 2-3/4" Powder Coated Carrier with Folding Shank 7350684 18131 0.5K 6" Note: Both Carriers include a 5/8" Hitch Pin Note: Carriers may interfere with rear-mounted spare tires. Part# 6300108 6300107 Ref # F-1 F-2 Part# 7350717 7350449 7350387 7350389 7350158 7350115 Ref # 17000 17002 17301 17302 17200 A-93 Reduce From 1" 1-1/4" Max TW 0.6K 1K 0.8K 1K - Max GTW 10K 10K 10K 10K - 7350449 Hitch Ball Reducers Reduce To Description 3/4" Hitch Ball Reducer Bushing 1" Hitch Ball Reducer Bushing Weight Distribution Hitches Description Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Sway Control Kit to reduce lateral movements of trailer caused by wind 5/8" x 1-1/4" Sway Control Replacement Hitch Ball 7350158 - Sway Control Kit 7350387 7350115 WWW.TEXTRAIL.COM E-8 2010 Copyright by TexTrail, Inc. TOWING Part# 7358108 7358107 7350319 7350316 7350317 7350318 7350111 7350213 Size 4" 2-5/16" TO W I N G 5TH WHEEL TO GOOSENECK ADAPTER 6750137 7150033 7350486 7150057 Gooseneck King Pin Adapters Part# Ref # Size Type 7350486 7150033 6750137 7150057 GN5 15085 15086 15087 4" 4" 4" 4" Square Round Square Round Part# Ref # I.D. Type 6750206 4200 4" Round Part# 7150016 7150018 Ref # KP20038 KP20050 Size 2" 2" Type Weld-On Weld-On With Skid Plate Description Yes Yes Yes Yes Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck King Pin Adapter w/ 3/4” pin TOWING Gooseneck Extender Capacity Description 24K 10" Gooseneck Extender Gooseneck King Pins Description King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate Fifth Wheel Part# Ref # Capacity King Pin Description 7150005 FW0001 32K 2" 12" Diameter Holland Mini-Fifth Wheel Invert On Trailer for a single pivot Fifth Wheel with Safety Lock Handle. 8K Max Vertical Load Capacity. Accepts 2" SAE King Pins. 7150005 Part# 7350434 7350720 7350315 Ref # T-745 J-74511 F-5 Capacity 5K 5K - Adjustable Tow Bar Description Adjustable Tow Bar. Adjust from 26" to 41" wide. 2" Coupler and Universal Bumper Brackets 2-each 1/4" X 60" Coated Safety Chain Assemblies with Safety Latch Hooks 5/8" x 3" Zinc Pin and Clip 7350434 7350720 7350315 Gooseneck Hitch Plates & Fixed Ball Hitch Part# 7350370 7350719 6300117 6300119 6300189 6300063 7350671 6300200 Ref # 16055 16085 C-54 C-53 C-113 A-41 C-10 C-55 Capacity 25K 25K 25K 25K 30K 30K 30K Description Gooseneck Bent Plate 2-5/16" Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Spyder 2-5/16” Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Carbide Finish. Safety Chain and Ball sold separately. Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Raw Finish. Safety Chain and Ball sold separately. Safety Chain U-Bolt Kit 2-5/16" Coarse Thread Heat Treated Raw Finish Trailer Ball 1-1/4" Dia Shank x 2-5/8" Long Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate. * Fits Standard Fifth Wheel Rails. 6300200 6300117 7350370 7350671 7350719 WWW.TEXTRAIL.COM E-9 2010 Copyright by TexTrail, Inc. TO W I N G Fifth Wheel Hitches Part# Ref # Capacity Height 7358100 16115 16K 13-1/4"-17" 7358103 16516 16K 14"-17" 7358104 16616 16K 14"-17" Description E5 Auto-Locking Dual Pivot Head Fifth Wheel Hitch E5 Fifth Wheel with Roller E5 Fifth Wheel with Roller & Base Rails Color Indicator locations 7358100 7358101 16125 20K 13"-17" 7358109 16526 20K 17-1/2"-21-1/2" Q5 Fifth Wheel with Roller 7358102 16626 20K 17-1/2"-21-1/2" Q5 Fifth Wheel with Roller & Base Rails 7358105 16500 20K - R5 Self-Locking Fifth Wheel Roller 12" Travel 7358106 16200 - - Universal Fifth Wheel Base Rail Kit* 7350732 16204 - - Carbide Universal Base Rails Only Q5 Locking Jaw System - Self Aligning Spherical Axial Bearing Fifth Wheel Hitch with 3 Point Indicator 7358100 * Includes rails, brackets, and hardware. Custom vehicle brackets also available. Custom Fifth Wheel Bracket Kits* 7358105 Eliminates need for universal brackets and hardware To be used in combination with 16204 Carbide Universal Base Rails Make Model Style Year Part# Ref # Notes Chevy / GMC 1500 / 2500 LD Silverado / Sierra New Body Style Only 2007-2009 7350710 16412 No Drill Classic Body Style Only 1999-2007 7350723 16418 Drill 2500HD / 3500 Silverado / Sierra New & Classic Body Style 2001-2009 7350723 16418 Drill Ram 1500 Including Mega & Crew Cabs 2009 7350735 16422 Drill Except Mega & Crew Cabs 2009 7350736 16421 Drill 6' & 8' Beds, Including Mega Cab 2006-2008 7350737 16420 No Drill Dodge Ford All 2002-2005 7350725 16419 No Drill Ram 2500 & 3500 6' & 8' Beds, Including Mega Cab 2003-2009 7350737 16420 No Drill F-150 & F-250 LD 6' 5" & 8' Beds Only 2004-2010 All 1997-2003 7350727 16437 No Drill F-150 Heritage Heritage Edition Only 2004 7350727 16437 No Drill F-250 & F350 Super Duty All 2005-2010 7350728 16447 Drill F-450 Super Duty All, Except Cab & Chassis 7350732 7358106 7350726 16441 No Drill 1999-2004 7350729 16443 Drill 2008-2010 7350728 16447 Drill Nissan Titan All 2004-2009 7350738 16470 Drill Toyota Tundra 6' 5" Bed Only. Will not fit Crew Max 2007-2010 7350730 16468 Drill Standard Cab, Long Box Only 2000-2006 7350731 16465 No Drill Custom Fifth Wheel Bracket Kit 16420 16421 7350726 * 16204 Base Rail Required for Installation. X-5 Fifth Wheel Adapter Plate Part# Ref # Capacity Finish 7350721 16310 20K Carbide Description Adapts Square Turnover Ball goosenecks to 5th wheel * * Fits Standard Fifth Wheel Rails. 7350721 Fifth Wheel / Gooseneck Hitch Adapter Harness Part# Ref # Makes Description 7000003 56070 Chevy / GMC / Ford 7' Hitch Adapter Harness 7000004 56071 Dodge 7' Hitch Adapter Harness Part# Ref # Description 7150019 16721 10" 5th Wheel Lube Plate for reduced wear and tear when towing 7150019 Fifth Wheel Lube Plate 7000003 7000004 WWW.TEXTRAIL.COM E-10 2010 Copyright by TexTrail, Inc. TOWING Custom Fifth Wheel Brackets cut install time by 50% Reduces or eliminates the need for drilling TO W I N G GOOSENECK HITCHES Folding Ball Gooseneck Hitch Part# Ref # Capacity 6300138 C-52 30K Description Gooseneck Folding Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. TOWING 7350671 6300200 Fixed Ball Gooseneck Hitch Part# Ref # Capacity Description 7350671 C-10 30K Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. 6300200 C-55 30K Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate. 30K Folding / Fixed Ball Gooseneck Hitch Installation Kits* Universal Gooseneck Hitch Installation Kit Part# Ref # Capacity 6300160 C-502 30K Description 6300160 Universal Rail Kit. Raw Finish. Drill. 30K Custom Gooseneck Hitch Installation Kits Laser cut for precise fit Grade 5 mounting hardware Easy to follow installation instructions Make Model Style Year Part# Ref # Notes Chevy / GMC 1500 New Body Style - All Beds 2007-2009 6300142 C-331 Drill 1500/2500LD Classic Body Style - All Beds 1999-2007 6300156 C-341 No Drill 2500HD /3500 New & Classic Body Styles 2001-2009 6300156 C-341 No Drill Ram 1500 All 1994-2001 6300157 C-509 Drill 2002 6300144 C-319 No Drill 1994-2002 6300157 C-509 Drill 2003-2008 6300143 C-520 Drill Dodge Ram 2500 & 3500 Ford All Beds, Including Mega Cab F-150 All 6300140 2004-2008 6300158 C-321 No Drill 1997-2003 6300141 C-506 Drill F-150 Heritage Edition Only 2004 6300141 C-506 Drill F-250 & F-350 All Super Duty 1999-2009 6300140 C-322 No Drill F-450 All Super Duty Except Cab & Chassis 2008-2010 6300140 C-322 Drill * Universal and Custom Gooseneck Hitch Installation Kits are for use with Fixed and Folding Ball Gooseneck Hitches 7350671, 6300200 & 6300160. Gooseneck Accessories Part# Ref # Description 6300189 C-113 Safety Chain U-Bolt Kit 6300203 C-150 Folding Ball Steel Cutting Template 7350676 1900-2-1600 6300189 6300203 Safety Chin U-Bolt Kit (for B&W turn-over-ball) see page E-12 WWW.TEXTRAIL.COM E-11 2010 Copyright by TexTrail, Inc. TO W I N G GOOSENECK HITCHES CONTINUED 7350667 Make Chevy/ GMC Ford Nissan Toyota Part# 7350902 7350576 7350901 7350899 7350564 7350595 6750206 Part# 7350721 Notes TOWING Dodge Turnover Ball™ Gooseneck Hitch Style Year Part# Ref # New Body Style Short Bed Only 2007-2011 7350666 1057 New Body Style Long Bed Only 2007-2011 7350565 1007 Classic Body Style Light Duty 2001-2010 7350639 1059 3/4 Ton New Body Style Heavy Duty 2001-2010 7350667 1067 Classic Body Style Light Duty 1999-2007 7350639 1059 1 Ton New Body Style 2007-2009 7350667 1067 Classic Body Style 2001-2007 7350560 1062 1/2 Ton All 2004-2011 7350577 1104 All 1997-2003 7350641 1197 Heritage 2004 7350641 1197 3/4 Ton Light Duty 1997-2003 7350641 1197 Super Duty 1999-2010 7350672 1108 1 Ton Super Duty 1999-2010 7350672 1108 F-450 with Factory Installed Beds 2008-2010 7350672 1108 1/2 Ton All 2009-2011 7351309 1309 All except Mega-Cab 2002-2008 7350561 1316 Mega-Cab Short Bed 2003-2011 7350617 1306 All 1994-2001 7350594 1394 3/4 Ton All 2003-2009 7350617 1306 All 1994-2001 7350594 1394 1 Ton All 2003-2009 7350617 1306 All 1994-2002 7350594 1394 All 2004-2011 7350891 1208 2007-2011 7350893 1257 All 2000-2006 7350892 1251 * The ball cannot be stored in the receiver of this hitch. B&W Accessories will NOT work with this model. Turnover Ball™ Gooseneck Hitch Accessories Ref # Description 6750206 1900 Latch Pin Pull Handle 2000 Turnover Ball™ 30K Machined 2-5/16" 7350595 2025 Turnover Ball™ 3" Ball 2050 Turnover Ball™ 20k High-Rise 2-5/16" 7350576 7350899 4000 Turnover Ball™ 2" King Pin 4085 Turnover Ball™ 4" Gooseneck Extender 2-5/16" 4200 Turnover Ball™ 10" Gooseneck Extender 24K 4"ID X-5 Fifth Wheel Adapter Plate Ref # Capacity Finish Description 16310 20K Carbide Adapts Square Turnover Ball goosenecks to 5th wheel * * Fits Standard Fifth Wheel Rails. Model 1/2 Ton 7350564 7350721 Part# 7350563 7350897 7350894 Ref # 3000 3050 1500 Capacity 18K 18K Companion Fifth Wheel RV Hitch Description Turnover Ball™ Companion Fifth Wheel RV Hitch Turnover Ball™ Companion Fifth Wheel RV Hitch for Flat Bed Trucks Installation Kit for Flat Bed Companion Fifth Wheel Hitch (welding required) 7350563 WWW.TEXTRAIL.COM E-12 2010 Copyright by TexTrail, Inc. TO W I N G TOWING TEXTRAIL PACKAGED PRODUCTS Packaged Trailer Balls Length Rise Finish Capacity Description Part# Ref # Ball Shank 6300031-01 TTB2517 2-5/16" 1-1/4" 2-5/8" - Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 6300079-01 TTB2516 2-5/16" 1" 2-1/8" - Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball 6300082-01 TTB2016 2" 1" 2-1/8" - Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Part# Ref # Finish Size 7350209-01 TTRP120 Zinc 1/2" 7350315-01 TTRP583 Zinc 5/8" 6300031-01 Packaged Receiver Pins Description 105° Bent Receiver Pin with Retaining Clip 105° Bent Receiver Pin with Retaining Clip 7350315-01 6300082-01 7350209-01 Need help finding your correct parts? Call any of our 6 locations today! East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143 Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955 WWW.TEXTRAIL.COM E-13 2010 Copyright by TexTrail, Inc. TO W I N G TOWING WWW.TEXTRAIL.COM E-14 2010 Copyright by TexTrail, Inc. C A R G O CO N T R O L CARGO CONTROL Table Of Contents - Cargo Control Tie Loops Grab Handles D-Rings Rings Rope Rings Load Binder Chain Hooks Quick Links Links E-Track Cargo Management System Load Locker™ Winch Ratchets Ratchet Straps Winch Bar Corner Protectors Web Winder Ratchet Straps Axle Straps Rubber Straps Wheel Nets Wheel Chock Motorcycle Wheel Chock Gas / Water Cooler Holder Racks RACK'EM™ Trailer Dolly Bins WWW.TEXTRAIL.COM F-2 F-2 F-2 F-2 F-2 F-3 F-3 F-3 F-3 F-3 F-3 F-4 F-4 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-6 F-6 F-6 F-6 F-6 F-6 F-6 F-1 2010 Copyright by TexTrail, Inc. C A R G O CO N T R O L Tie Loops Part# Ref # Description Diameter I.D. Style Application 7500157 TLA122 Tie Loop - Aluminum 1/2" 2" Round Bolt-On 8850009 TLM122 Tie Loop - Metal 1/2" 2" Round Weld-On 5350715 TLM3812 Tie Loop - Metal 3/8" 1/2" Bent Weld-On 5350147 TLM7161 Tie Loop - Metal 7/16" 1" Bent Weld-On 5350146 TLM121 Tie Loop - Metal 1/2" 1-1/2" Bent Weld-On 5350716 TLM3821 Tie Loop - Metal 3/8" 2-1/4" Square Weld-On 5350222 TLM3811 Tie Loop - Motor Cycle Tie Down 3/8" 1-1/4" Bent Weld-On 8850109 TLM382 Tie Loop - Metal 3/8" 2" Bent Weld-On 5350719 GHM385 Grab Handle - Metal 3/8" 5" Square Weld-On 5350605 GHM7165 Grab Handle - Metal 7/16" 5" Square Weld-On 5350605 5350719 5350716 8850009 CARGO CONTROL 8850109 5350715 7500157 5350147 5350146 5350222 D-Rings & Rope Ring Safe Working Load Part# Ref # Description 7500158 R716 Rope Ring - 7/16" dia. Aluminum bolt-on with bracket 1000 LB 9250089 R14 Rope Ring - 1/4" dia. steel zinc. 800 LB 9250088 R38 Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole 850 LB 9250087 R14B Rope Ring - 1/4" dia. steel zinc w/bazel 500 LB 9250019 DR12S D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS* 4080 LB 9250035 DR12Z D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS* 4080 LB 9250036 DR58S D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS* 6K LB 9250016-02 B50 D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA 15.5K LB 9250016 B50A D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* 2K LB 9250034 B801 Rope Ring - Recessed Zinc 3-5/8" hole 6K USB* 2K LB 9250033 B901 Rope Ring - Recessed Zinc 360° Rotating 6K USB* 2K LB 7500158 9250089 9250088 9250087 9250034 *Ultimate Breaking Strength 9250035 9250036 9250019 9250016-02 9250033 WWW.TEXTRAIL.COM F-2 2010 Copyright by TexTrail, Inc. C A R G O CO N T R O L Load Binders and Chain Part # Ref # Description 9250059 LBLR Load Binder - 5/16" w/lever accepts 5/16" - 3/8" chain 9250060 LBRT Load Binder - 5/16" Ratchet accepts 5/16" - 3/8" chain 9250024 TRC516 Transport Chain - 5/16" x 20' w/ 5/16" Forged Hooks See Section J for more Chain. Safe Working Load 5,400 LB 5,400 LB 4,700 KB Grade 70 Grab & Slip Hooks CARGO CONTROL Part# Ref # 8850072 8850073 8850074 8850097 8850017 8850016 GH14 GH516 GH38 SH14 SH516 SH38 Part# 8850090 8850091 8850092 7300045 9250401 9250012 9250403 9250368 9250369 8850018 8850019 8200146 Ref # 162S 225 231 316QL 516QL 38QL 12QL 516SL 38SL 716S 716SC 1270 Safe Working Description Grade Load 1/4" Grab Hook 7,800 UBS* 5/16" Grab Hook 11,700 UBS* 3/8" Grab Hook 16,200 LB UBS* 1/4" Slip Hook w/ Latch 7,800 UBS* 5/16" Slip Hook w/ Latch 11,700 UBS* 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Description Snap Hook - Double-End 3-1/2" x 5/8" Snap Hook - Swivel 3-1/2" x 5/8" Snap Hook - Open End 3-1/2" x 3/8" Quick Link - 3/16" 616 LB UBS* Quick Link - 5/16" 1540 LB UBS* Quick Link - 3/8" 1900 LB UBS* Quick Link - 1/2" 2650 LB UBS* Spring Link - 5/16” 350lb WLL Zinc Spring Link - 3/8” 425lb WLL Zinc S Hook - 7-16" 5K S Hook - 7-16" 5K w/ Catch Spring Link - Bulk 100 pk GRAB 2,600 LB 3,900 LB 16,200 LB 7,800 LB 11,700 LB 16,200 LB 8850090 G43 G43 G43 G43 G43 G43 8850091 SPRING SLIP 8850092 QUICK *Ultimate Breaking Strength *DO NOT EXCEED ULTIMATE BREAKING STRENGTH. NOT DESIGNED FOR OVERHEAD LIFTING.* Part # 9250049 Ref # 48117-25 E-Track Systems Description E-Track Horizontal 10' Green Primer 9250071 9250046 9250053 9250071 48117-21 E-Track Horizontal 10' Galvanized 9250136 40838-10 E-Track Vertical 10' Green Primer 9250053 40921-10 Standard Beam Socket for 2X4 lumber 9250046 49542-10 D-Ring 1K 9250047 47772-12 Tie Off 1K 9250048 40386-11 Rope Tie Off. Spring Actuated 1K 9250045 48672-13 Ratchet Buckle Strap 12' 6k webbing 1K load limit WWW.TEXTRAIL.COM 9250049 9250136 9250045 F-3 9250047 9250103 2010 Copyright by TexTrail, Inc. C A R G O CO N T R O L Part # Cargo Management System Ref # Description 9250500 Rail - 97" x 2" Alum for floor or wall. Cut to size 9250504 Mount - LEFT Side Mount for 2x4 - Each 9250537 Mount - RIGHT Side Mount for 2x4 - Each 9250505 Mount - Pair 1 ea, 9250504 & 9250537 9250506 Tie Down - Anchor Tie Down - Each 9250507 Tie Down - Anchor Tie Down - Pair in Clam Pkg 9250533 Holding Brace for 9250530 - Each 9250512 Holding Brace for 9250530 - Pair in Clam Pkg 9250514 Lug Wrench Holder - Universal - Each 9250513 Lug Wrench Holder - Universal - Each Clam Pkg 9250516 Spare Tire Mount - Each 9250515 Spare Tire Mount - Each Clam Pkg Tie downs give an anchor anywhere on your track. They hold cargo steady with your material of choice. Works with a tie down strap, rope, bungee cord or anything that can hang on. 9250506 EACH 9250507 PR - CLAM PKG Keep your lug wrench out of the way. The lug wrench mount can mount anywhere. 9250514 - BULK 9250513 - EACH CLAM PKG Aluminum load brace gives your system a finished look. Dove tails are extruded on both sides of brace for side to side locking. Comes 99” and is cut to size with 2 end caps. 9250530 99” Piece 9250531 Plastic End Cap Mount these in your trailer to hold your Load Brace or wooden 2x4 to store safely when not in use. 9250533 EACH 9250512 PR - CLAM PKG Keep that spare tire out of the way. Tire mount comes with its own mini-track to mount independently. Existing track can be cut down any length and placed in any area it can be mounted. Can be used with any size tire. 9250516 EACH 9250515 EACH CLAM PKG 3 Easy Steps! Open Trailer Tire Mount also keep that spare tire out of the way. Tire mount comes with its own mini-track to mount independently. Can be used with any size tire. TexTrail Part # 9250538 WWW.TEXTRAIL.COM F-4 2010 Copyright by TexTrail, Inc. CARGO CONTROL Side rails are the start of a load management system with slide mounts or tie downs. They are installed on the side of the trailer and /or the floor. They can easily be cut to adapt to trailer size. 9250500 2x4 slide mounts allow you to lock in your load with an aluminum load brace or wooden 2x4. 9250504 LH, 9250537 RH 9250505 PR - CLAM PKG C A R G O CO N T R O L Cargo Control Part # Ref # Description 9250157 APS15 Ratchet Strap - 1" x 15' with S-Hooks 9250159 49368-10 Ratchet Strap - 1" x 15' with S-Hooks 4-Pack 43877-10 15’ 9250111 43887-10 Ratchet Strap - 1" x 16' with Wire Hooks 43887-10 20’ 9250108 43887-11 Ratchet Strap - 1" x 20' with Wire Hooks 9250371 SL82 Ratchet Strap - 1.25" x 16' with S-Hooks 700lb WLL* 9250372 SL32 Ratchet Strap - 1.5" x 15' with J-Hooks 400lb WLL* 9250130 557xx Ratchet Strap - 2" x 15' with Flat Hooks 10K 3333 WLL* 9250115 45982-10 Ratchet Strap - 2" x 27' with Flat Hooks 10K 3333 WLL* 9250065 49347-10 Ratchet - Replacement for 9250115 and 9250130 with Flat Hook 9250102 41659-10-27 Strap - Replacement for 9250115 and 9250130 27' with Flat Hook 9250142 47640-30 Lashing Winch - 2" with Hex Drive 4.4K WLL* 9250109 43795-10-20 Strap - 4" x 27' with flat Hook 18K 5,400 WLL* CARGO CONTROL 9250110 9250156 9250130 43795-10-30YAS Strap - 4" x 30' with flat Hook 18K 5,400 WLL* 9250149 43563-10 Winch - Use with 4" Straps Weld-On 9250140 43564-14 Winch - Use with 4" Straps Bolt-On 9250150 43565-12 Winch - Use with 4" Straps Storable Slider 9250153 42357-11 Winch Track - for use with 9250150 9250151 42313-10 Winch Bar - Standard Painted Black 9250152 42313-12 Winch Bar - Combination Box End Chrome 9250373 45801-10 Web Winder - use with 2" & 4" Straps Steel Painted 9250357 43986-10 Corner Protector - High Density Polymer Straps up to 4" 9250115 9250065 - ratchet 9250142 - strap 9250142 9250109-27’ 9250149 9250150 9250140 9250357 9250153 9250151 9250373 9250152 Axle Straps and Wheel Nets Part # Ref # 9250105 42101-31 Axle Strap - 2" Turned Snap Hook / Ratchet with Flat Hook BL5 9250106 49020-20 Axle Strap - 2" x 8' Flat Snap Hooks with Ratchet BL1 9250104 30AS21 Axle Strap - 2" x 21" with Protective Sleeve BL4 9250116 45982-42 Ratchet Strap - 2” x 27’ with J-Hooks 10K 3333 WLL* 9250393 12-10456 Ratchet - WITH Snap Hook 2”x15” 9250162 Description 9250106 9250142 40985-05-12 Sleeve - Replacement Protective Sleeve 9250156 2615SH 9250137 45143-22 9250138 30ATB Wheel Net - Use with 13" - 17" Adjustable 9250139 30RT Wheel Net - Use with 10" - 22" Tires with Ratchet 9250321 RTS9 Rubber Tie - 9" rubber 9250322 RTS15 Rubber Tie - 15" rubber 9250323 RTS21 Rubber Tie - 21" rubber 9250324 RTS31 Rubber Tie - 31" rubber Soft Tie - 18" Motorcycle Extension 2-PACK Wheel Net - Use with 14" - 15" Non-Adjustable WWW.TEXTRAIL.COM Assorted Rubber Straps F-5 2010 Copyright by TexTrail, Inc. C A R G O CO N T R O L Motorcycle Wheel Chocks Part # Ref # Description 9750007 WC35 Wheel Chock - 3-1/2" Removable Chrome 9750008 WC55 Wheel Chock - 5-1/2" Removable Chrome 9750009 WC65 Wheel Chock - 6-1/2" Removable Chrome 9750016 WOTO Wheel Chock - T-Bolt 9750017 MD010T Wheel Chock - Mounting Hardware 9750022 SPWC3BT Wheel Chock - 6-1/2" Removable Chrome 9750014 SPFKW Wheel Chock Mounting (Wood Floor) Kit Part # Ref # Description 6650612 RA-1L 5 Gal. Gas Can/Cooler Rack 6650625 RA-4 Back Pack Blower Rack 9750014 9750016 6650534 Cargo Solutions 6650626 RA-5 Trimmer Rack 6650628 RA-6 Trimmer Rack - For open trailer (pad locks sold separately) 6650635 RA-7 6-Hook Multi-Tool Rack 6650636 RA-10AB Lubrication Rack & Bin 6650636 6650637 RA-10B Lubrication Bin Only (Must be used with 6650636) 6650638 RA-10C Lubrication Bin - Large Capacity (Must be used with 6650636) RA-15 Shovel Rack 6650640 RA-18 Beverage Cooler Rack 6650641 RA-19 Blower Rack - For open trailer (pad locks sold separately) 9420022 RA-20 6650638 Trailer Dolly 9250170 6-Hook Multi-Tool Rack Retracatable Cargo Buckle Strap S-Hook 2”x6’ ea 3.5k Holds rakes, hoses, cords 9250171 2”x6’ Flush Cargo Buckle S-hool 3.5k 9250175 2”x6’ Cargo Buckle S-hool Adapter (use w/9250170) 9250172 2”x6’ Cargo Buckle 3.5k S-hook pair of marine buckles almost anything. 9250176 Cargo Buckle e-track adapter O-ring (use w/9250170) 6650635 9250178 Cargo Buckle Mounting Brackets Universal Mount and more; it can hold See Section H for more Cargo Storage Solutions. This rack will securely hold 3 6650612 trimmers and has a built-in locking 6650639 8850641 mechanism. 6650628 The 3 or 5-gallon beverage cooler rack is designed for either an open or an enclosed trailer. 6650640 9250170 6650625 9250172 6650626 9250171 9250176 9420022 WWW.TEXTRAIL.COM F-6 2010 Copyright by TexTrail, Inc. CARGO CONTROL 6650639 6650637 C H E M I C A L S & CO AT I N G S CHEMICALS & COATINGS Table Of Contents - Chemicals & Coatings All Purpose Stain Remover Brake Cleaner Brake Fluid Chemicals Cleaner Gear Oil Grease Hardener Lubricants Metal Surface Cleaner Penetrating Oil Pin Stripers Primer Reducer Respirators & Scotch Brite™ Sealants Hand Towels TexTrail Value Finishes Transmission Fluid Valspar Finishes VHB Tape Warning & Specification Decals WWW.TEXTRAIL.COM G-5 G-3 G-3 G-3 G-5 G-3 G-3 G-6 G-3 G-5 G-3 G-2 G-6 G-6 G-2 G-4 G-5 G-6 G-3 G-6 G-2 G-2 G-1 2010 Copyright by TexTrail, Inc. C H E M I C A L S & CO AT I N G S Craftsman Deluxe Pin Stripers Part# 8500079 8500123 8500124 Ref # CRAFTSMAN1 CRAFTSMAN2 DELUXE Wheel Heads #95 (7/64") #115 (1/8") #16 (1/64") #57 (1/16") #25 (1/32”) #73 (3/32”) #93 (7/64”) Description Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Deluxe Striping Tool Kit with 3-wheel heads, 1-cleaning brush and 3-guide arms VHB™ Tape 3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior applications. Legend: Ref # Foam Type 4611 Firm 4611 Firm 4622 Conformable 4622 Conformable 4622 Conformable 4622 Conformable 4624 Conformable 4624 Conformable 4941F Conformable 4941F Conformable 4941F Conformable 4941F Conformable Color White Dark Gray White White White White White White Gray Gray Gray Gray Width 1" 1" 0.75" 1" 1" 1" 0.75" 1" 0.75" 0.75" 1" 1" Thickness 0.045" 0.045" 0.045" 0.045" 0.045" 0.045" 0.062" 0.062" 0.045" 0.045" 0.045" 0.045" Adhesive General Purpose General Purpose General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Length 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS Unit of Measure 9-Rolls 9-Rolls 1-Roll 1-Roll 2-Rolls 9-Rolls 1-Roll 1-Roll 12-Rolls 3-Rolls 2-Rolls 9-Rolls Description 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape + General Purpose Acrylic Adhesive: Bonds to most higher surface energy substrates including metal, glass and high surface energy plastics. + Multi-Purpose Acrylic Adhesive: Bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. This unique adhesive also has the ability to resist the migration of plasticizers in vinyl substrates. + Conformable Foam Type: Provides high strength with the capability while maintaining high internal strength. + Firm Foam Type: Provides the highest level of foam strength in the 3M™ VHB™ Tape Family. 8500145 8500146 8500140 8500139 8500143 8500142 Respirators & Scotch Brite™ NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL). Medium Large Ref# Description Welding Half Face piece Respirator Assembly with Particulate Filters 8500144 8500145 7182 2097 Particulate Filter with Nuisance Level Organic Vapor Relief for Welding Half Facepiece Respirator Assembly 100-count 8500146 7184 3M recommended for spray paint applications, with maintenance free design for convenience. Designed to be a truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent. The packout includes the Maintenance Free Half Facepiece Respirator 07192 with permanently attached organic vapor cartridges, 1 pair of filter retainers 7054, and 1 pair of P95 filters 7194. Medium Large Ref# Description Spray Painting Half Facepiece Respirator Assembly with Particulate Filters 8500141 8500142 7192 5P71 Particulate Filter for Spray Painting Half Facepiece Respirator Assembly 100-count 8500143 7194 Designed to help provide comfortable, reliable worker protection for applications such as welding, soldering, cutting, grinding, and sanding. It features the 3M™ Cool Flow™ Exhalation Valve, adjustable M-noseclip, and braided headband to help provide a custom fit and secure seal. Per Box Part# Ref# Description Particulate Welding Respirator with Cool Flow™ Exhalation Valve 80-each 8500139 7189 Scotch-Brite™ General Purpose Hand Pad 6" x 9" Aluminum Oxide Abrasive Mineral Type 20-each 8500140 7447 Informational & Warning Decals Ref # Part# Type Description Warning 6800079 Safety Chain Warning 6800083 Danger / Caution Notice Warning 6800084 Cylinder Shock Pressure Can Cause Injury Warning 6800100 Danger to Hands & Feet Informational 6800098 Tire & Loading Information Warning 6800002 Do Not Go Under Raised Body WWW.TEXTRAIL.COM G-2 2010 Copyright by TexTrail, Inc. CHEMICALS & COATINGS Part# 6850007 6850008 6850006 6850001 6850002 6850003 6850005 6850004 6850009 6850010 6850011 6850012 C H E M I C A L S & CO AT I N G S CHEMICALS & COATINGS CHEMICALS AND LUBRICANTS DOT 3 Brake Fluid "DOT 3 Brake Fluid is a fully approved, DOT 3 type motor vehicle brake fluid suitable for use in all vehicles where DOT 3 fluids are recommended. It is suitable for both disc and drum brake systems. Meets or exceeds standards #116 SAE J1703 and ISO 4925." Part# Ref # Type Size Description 6700056 SUS 32 DOT-3 1-QT Brake Fluid 6700055 SUS 33 DOT-3 1-GL Brake Fluid Hi-Temp Red EP Lithium Grease Hi-Temp Red EP Lithium Grease Super S Hi-Temp Red Grease is a NLGI 2, lithium based premium quality, multi-functional grease with outstanding high temperature and extreme pressure characteristics. It provides excellent lubrication over a wide range of operation temperatures and services. Its dropping point exceeds 500°F. It also has outstanding lubrication qualities that extend over a wide range of Heavy-Duty/ Fleet applications including wheel bearings (disc and drum), vehicle chassis, boat trailers, universal joints, ball and roller bearings and many others. Super S Hi-Temp Red Grease is well suited for automotive, farm and industrial applications. Part# Ref # Type Size Description 6700047 SUS 67 #2 14-OZ Hi-Temp Red Grease 6700003 SUS 77 #2 1-LB Hi-Temp Red Grease 6700057 SUS 71 #2 35-LB Hi-Temp Red Grease Multi-Purpose (MP2) Lithium Grease Multi-Purpose (MP2) Grease is a NLGI 2, lithium based, water resistant grease for automotive and light to medium trucks, farm and industrial applications. It is recommended for automotive chassis lubrication points, ball joints and universal joints and resists softening at high operating temperatures. It seals out dirt and moisture contamination and protects against rust and corrosion. Part# Ref # Type Size Description 6700048 SUS 66 #2 14-OZ Multi-Purpose Blue Grease Multi-Purpose High Performance GL-5 Gear Oil Formulated for the most severe service conditions and environments in cars, trucks and heavy equipment. It provides excellent load carrying capability, wear resistance, oxidation stability, anti-rust, anticorrosion and anti-foam properties. GL-5 Gear Oil contain sulfur and phosphorus additive materials, but no zinc. Meets Military Specification MIL-L-2105C. Part# Ref # Type Size Description 6700054 SUS 17 80W90 1-QT High Performance GL-5 Gear Oil Multipurpose Dextron / Mercon (D/M) Automatic Transmission Fluid (ATF) Multipurpose D/M ATF is a multipurpose ATF designed for new generation, electronically controlled transmissions. It meets the latest GM Dexron III H Specification. It may also be used in previous transmissions built by General Motors, Daimler Chrysler, Ford (except where Type F required), and most foreign manufacturers, where a Dexron III G, Dexron IIE, Dexron II, Dexron, Mercon, or Type A Suffix A transmission fluid is specified. Part# Ref # Type Size Description 6700060 SUS 126 D/M 1-GL Multi-Purpose Automatic Transmission Fluid Brake Parts Cleaner & Penetrating Oil Non-Flammable Brake Parts Cleaner is a powerful solvent blend that easily removes brake fluid, grease, oil and dirt from brake parts. Penetrating Oil is a multipurpose product formulated to lubricate, penetrate, displace moisture and prevent corrosion. Loosens and frees rusty parts. Part# Ref # Size Description SUS 6700078 18-OZ Non-Flammable Brake Parts Cleaner S107 Penetrating Oil 6700079 SUS S104 11-OZ WWW.TEXTRAIL.COM G-3 2010 Copyright by TexTrail, Inc. C H E M I C A L S & CO AT I N G S CHEMICALS AND LUBRICANTS CONTINUED East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143 Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955 Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519 6700046 9420030 9420031 Tube Lube Grease Gun & Refill Cartridges Ref # Size Description 9420030 96-30132 3600 PSI Mini Grease Gun Kit with one 3-OZ Cartridge 9420031 96-30192 4500 PSI Mini Grease Gun Kit with one 3-OZ Cartridge 6700046 11300 3-OZ 4-Pack Multi-Purpose Lube Grease CHEMICALS & COATINGS Part# Bearing Packer Part# Ref # Description 9420028 70-025 Deluxe Threaded Steel Post with Zerk Bearing Packer 9420028 Silicone Sealant TremPro 644 RTV is a one-part, acetoxy silicone sealant. TremPro 644 RTV cures to a flexible rubber when exposed to moisture present in the air. It is specially designed for sealant joints between most non-porous materials such as glass, aluminum, metal and metal alloys. It is easily gunnable over a wide range of temperatures and has excellent adhesion to most common substrates without the use of a primer. It has excellent handling characteristics and tools to a smooth, attractive finish. TremPro 644's superior skin time makes it ideal for OEM and production line uses. Do not use on galvanized steel, lead or copper. Part# Ref # Size Color Description 6700200 TR644A 10.1-OZ Aluminum TremPro 644 RTV Silicone 6700201 TR644W 10.1-OZ White TremPro 644 RTV Silicone 6700202 TR644C 10.1-OZ Clear TremPro 644 RTV Silicone 6700203 TR644I 10.1-OZ Ivory TremPro 644 RTV Silicone Mat Spray Glue Part# Ref # Size Description 6700027 C012 15-OZ Mat Spray Glue (Red) WWW.TEXTRAIL.COM G-4 2010 Copyright by TexTrail, Inc. C H E M I C A L S & CO AT I N G S CHEMICALS AND LUBRICANTS CONTINUED Aluminum Cleaner And Brightener Streak Master Aluminum Cleaner And Brightener is the acid brightener of the future and the future is now. It has been developed to improve the safety of those cleaning with traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener); yet, still have a product that removes road film, grime, algae, scum, lime deposits, water line stains, oxidation, and brightens bare aluminum. Works just like the traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener) WITHOUT the negative hazards associated with that product. Forget the toxic and poisonous concerns and step up to new technology. Part# Ref # Size Description 6700052 SMAB1 1-GL Streak Master Aluminum Cleaner & Brightener Black Streak Remover Removes black streaks that have set deep into the paint finish over time on campers, trailers and other equipment. Black Streak Remover is recommend when the stains have gone extremely deep into the paint and have been impossible to remove. After using the black streak remover, you can apply Ultra Guard product to protect the finish and stop streaks from setting in again. Part# Ref # Size Description 6700051 SMKT1 1-GL Streak Master Black Streak Remover Kit (includes 1-qt spray bottle) 6700050 SMBR1 1-GL Streak Master Black Streak Remover Ultra Guard Wet or Dry Wash Use Streak Master Ultra Guard as Wet Wash or Dry Wash. Dilute Ultra Guard to the desired dilution for any given job. Spray directly to the surface to be cleaned and wipe away grime and stains. With a dry towel, lightly buff to a brilliant clean and shine. Part# Ref # Size Description 6700053 SMUG1 1-GL Streak Master Ultra Guard Wet or Dry Wash Part# Ref # Count Description 6700010 1485412 72 Scrubs In-A-Bucket® Hand Towels CHEMICALS & COATINGS Hand Towels - Scrubs In-A-Bucket® Supreme Acrylic Finishes Information Valspar's 750 Series Supreme Acrylic Finishes are premium quality acrylics featuring exceptional gloss, distinctness of image (DOI), and weathering resistance. The 760 Series is also a low HAPS product when used with the HAP Series Reducers. The 760 Series is available in some finishes. The Supreme acrylic series features fast dry times allowing faster production rates. Supreme is supplied in a full-bodied viscosity allowing the painter to reduce the material with the appropriate temperature range reducer for the ambient application temperature. The Reducers and Hardeners are compatible with both the 750 and 760 Series Supreme Acrylic Finishes. Surface Preparation Why Prime? Primer adheres better to metal than a finish would; Primer give the metal better protection; and Primer provides a better surface for the finish to adhere to. Coating performance is affected by proper surface preparation. Coating integrity and service life will be reduced because of improperly prepared surfaces. As high as 70% of all coating failures can be directly attributed to inadequate surface preparation that affects coating adhesion. Selection and implementation of proper surface preparation techniques ensures coating adhesion to the substrate and prolongs the service life of the coating system. Use Valspar's Grey Hi-Build Non-Lifting Primer (8500040) 1-gallon (8500085) 5 gallons for your surface preparation. Use 1-part Reducer to 4-parts Primer Reduction For conventional spray, reduce 33-50 percent with reducer. For air less and air assist application, reduce 10-20 percent with reducer. The reducer and paint must be mixed well for proper application. For best results, use only Valspar's HAP Series Reducers for Supreme acrylic topcoats. Supreme Reducers Fast Reducer Medium Reducer Slow Reducer TexTrail Part Number 8500094 8500117 8500116 Temperature Range Under 50° thru 75° F 65° thru 95° F 88° to over 100° F Valspar's Acrylic/Urethane Hardener is specifically formulated to be used in Valspar's Supreme acrylic finishes. The hardener increases the gloss retention, chip, mar, and chemical resistance of the coating. The urethane hardener improves the production time by significantly improving the properties of the paint in tack free times, water spotting, and recoat times. The hardener is used at an 8 to 1 ratio (1-pint per 1-gallon or 2-quarts hardener to 5-gallons finish). Once the hardener is added to unreduced paint, reduce according to the recommendations using HAP Series Reducers. All mixed material should be used within four hours after mixing. Any material sprayed after four hours may be lower in gloss and will result in poor adhesion to the primer. Clean all equipment immediately after use. WWW.TEXTRAIL.COM G-5 2010 Copyright by TexTrail, Inc. C H E M I C A L S & CO AT I N G S PAINT Ref# Color Description 1-GAL 5-GAL 750N939 Beige Arizona Beige Pearl Metallic Acrylic Finish 8500008 8500084 8500118 750B989 Black Black Acrylic Finish 8500006 8500045 8500115 750A939 Blue Indigo Blue Metallic Acrylic Finish 8500028 8500041 - 750A022 Blue Safety Blue Acrylic Finish 8500035 8500052 - 750X914 Gray Storm Gray Pearl Metallic Acrylic Finish 8500036 8500070 8500083 750X902 Gray Gray Metallic Acrylic Finish - 8500049 - 750G118 Green Olive Drab Acrylic Finish 8500034 - - 750G945 Green Amazon Green Metallic Acrylic Finish 8500005 8500004 - 750G040 Green Implement Green Acrylic Finish 8500022 8500135 - 750A454 Orange Equipment Orange Acrylic Finish 8500073 - 8500136 750N912 Pewter Pewter Metallic Acrylic Finish - 8500138 - 750R948 Red Dark Red Acrylic Finish 8500018 8500068 - 750R974 Red Victory Red Acrylic Finish 8500037 8500071 8500096 750R927 Red Standard Red Acrylic Finish 8500007 8500112 - 750S926 Silver Silver Metallic Acrylic Finish 8500017 8500044 - 750W959 White Linen White Acrylic Finish 8500031 8500042 - 750Y902 Yellow Caterpillar Yellow Acrylic Finish - - 8500082 750Y002 Yellow Medium Yellow Acrylic Finish 8500033 8500047 - 750Y004 Yellow Safety Yellow Acrylic Finish 8500016 8500053 - Ref# Color Description GAL 5-GAL DRUM - - 8500094 8500002 - 8500117 - - 8500116 HAP4575 Fast Acting Reducer for Cold Weather HAP6590 Medium Acting Reducer for Warm Weather HAP85100 Slow Acting Reducer for Hot Weather 341X017 Gray Hi-Build Non-Lifting Primer 8500040 8500085 - 699C900 Acrylic Finish Hardener 8500092 - - Value Finishes Ref# Color Description 1-PINT 1-GAL TT-105 Black TexTrail Industrial High Gloss Finish - 8500056 TT-114 Red TexTrail Industrial High Gloss Finish - 8500059 TT-139 Gray TexTrail Industrial High Gloss Finish - 8500060 TT-212 Blue TexTrail Industrial High Gloss Finish - 8500062 TT-109 Red TexTrail Industrial High Gloss Finish - 8500063 TT-108 Yellow TexTrail Industrial High Gloss Finish - 8500064 TT-106 White TexTrail Industrial High Gloss Finish - 8500065 TT-323 Green TexTrail Industrial High Gloss Finish - 8500067 TT-1002 Gray TexTrail Industrial Primer - 8500066 TexTrail Industrial Catalyst Hardener 8500072 8500061 TT-1501 WWW.TEXTRAIL.COM G-6 2010 Copyright by TexTrail, Inc. CHEMICALS & COATINGS SPRAY B O DY & F R A M E BODY & FRAME Table Of Contents - Body & Frame Air Conditioning Aluminum Box (Underbody, Tongue & Specialty) Aluminum Trim Ball Corners Box (Aluminum & Powder Coated Underbody & Tongue, Specialty) Caps for Gate Ramp Assemblies Ceiling Heat & Air Units Chrome Edge Trim "D" Bumpers Drill Bits Dump Tarp Kits Edge Guard Electric Fan Fenders Floor Screws Gate Lift Assist Generators Gravel Guard Gussets Heating Units Hydraulic Hoist Systems Light Protectors & Brackets Liquid Storage Tanks Mud Flaps Nose Bows Nose Caps Pipe Bows Powder Coated Box (Underbody, Tongue & Specialty) RACK-EM Double Barrel Gate Lift Assist Ramps Ramp Gate Assemblies Ramp Springs Rivets & Rivet Tools Rockshield Roof Bows (Round Pipe) Roof Bows (Square Tube) Roof Caps Rubber Mats Rumber® Products RV Generators Self Tapping Torx® Head Floor Screws Single Axle Fenders & Fender Backs Slats Specialty Box Springs for Ramps Stake Pocket Straps Tandem Axle Fenders & Fender Backs Tarp Kits Tongue Box Torx® Head Self Tapping Floor Screws Torx® Screw Bits & Holder Tradesman Boxes Trim Truck-Tack Boxes Triple Axle Fenders & Fender Backs Underbody Box Vents Water Caddy Water Cooler Rack Wedge Caps WWW.TEXTRAIL.COM H-1 H-7 H-17 H-8 & H-9 H-5 H-17 H-15 H-7 H-8 & H-9 H-12 H-16 H-19 H-6 H-7 H-2 H-10 H-14 H-8 H-6 H-6 H-7 H-19 H-7 H-18 H-12 H-5 H-5 H-6 H-17 H-14 H-14 H-15 H-16 H-10 H-6 H-6 H-5 H-5 H-12 H-11 H-8 H-10 H-2 H-5 H-18 H-15 H-16 H-19 H-3 H-19 H-17 H-10 H-10 H-18 H-8 & H-9 H-17 H-4 H-16 H-8 H-13 H-13 H-5 2010 Copyright by TexTrail, Inc. B O DY & F R A M E SINGLE FENDERS Ref # 10166 11378 10136 10145 11128 10570 10164 10149 10151 10155 10157 Part# 7050008 7050347 7050018 7050019 7050020 7050028 Ref # 10200 67473 10189 10191 10193 10198 Part# 7050014 7050021 Ref # 10171 20114 Part# 7050013 7050016 7050024 Ref # 10166 10169 10143 Part# 7050058 7050005 7050087 7050003 7050065 Ref # 10013 10009 10016 11111 10012 Width 7" 7" 8" 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4" Single Axle 1" Radius Fenders With 90° Lip Length Height Material Wheel Size Fender Back 21" 6" 16-GA 7050005 28" 10-3/4" 16-GA 13" 7050005 28" 10" 16-GA 13" 7050005 32" 15" 16-GA 15" 7050058 32" 15" 0.100 ATP 15" Included 32" 15" 0.100 ATP 15" 7050058 32" 15" 14-GA TP 15" 7050058 32" 16" 16-GA 16" Included 36" 18" 16-GA 16" 7050087 32" 16" 16-GA 15" 7050058 36" 18" 16-GA 15" 7050087 Single Axle 1/2" Radius Both Sides - Square Broke Fender Width Length Height Flat Material 10" 33" 16-1/2" 20" 16-GA 10" 32" 13" 8" 23" 9" 15" 16-GA 8" 26" 10" 17" 16-GA 8" 28" 9" 20" 16-GA 9" 32" 13" 22" 16-GA Single Axle 1" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 28" 10" 16-GA 12" 8" 28" 10" 16-GA 12" Single Axle 1-1/2" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 21" 6" 16-GA 8" 7-1/2" 23-1/2" 6-1/2" 14-GA 12" 9" 29" 8-1/2" 16-GA 13" Single Axle Fender Backs Width Length Material Notes 12" 31" 16-GA 8-1/2" 27" 18-GA 12" 34-1/2" 18-GA Rectangular 6-1/2" 21-3/4" 18-GA 10-1/2" 29-3/4" 18-GA Square Broke Notes Welded Back Welded Back Wheel Size 16" Fender Back 7050087 8" 13" 13" 15" 7050087 7050087 7050087 7050065 Notes Notes GA = Gauge ATP = Aluminum Tread Plate WWW.TEXTRAIL.COM H-2 2010 Copyright by TexTrail, Inc. BODY & FRAME Part# 7050013 7050017 7050022 7050026 7050025 7050103 7050075 7050006 7050029 7050009 7050010 B O DY & F R A M E TANDEM FENDERS Part# 7050030 7050002 7050032 7050034 7050041 Tandem Axle 1" Radius Fenders With 90° Lip Length Height Material Wheel Size 66" 19-1/2" 16-GA 14" 72" 21" 16-GA 15" 72" 20" 14-GA TP 15" 72" 20-1/2" 16-GA 15" 72" 20-1/2" 16-GA 16" Ref # 10002 10238 10250 10236 10242 Width 9" 9" 9" 9" 10-3/4" Ref # 10670 10336 Tandem Axle 1" Radius Both Sides Fender With 90° Lip Square Broke Width Length Height Material Fender Back Notes 10-3/4" 72" 21-1/2" 16-GA 7050059 10” 72” 17” 14-GA 7050059 Part# 7050085 Ref # 10330 Tandem Axle 1" Radius Both Sides Fender With 90° Lip Double Square Broke Width Length Height Material Fender Back Notes 9" 72" 17" 14-GA TP 7050064 Part# 7050035 7050036 7050039 7050042 Tandem Axle 1" Radius Both Sides Tear Drop Fender With 90° Lip Double Square Broke Ref # Width Length Height Material Fender Back Notes 10333 9" 72" 16-1/2" 16-GA 7050067 10335 9" 72" 17" 14-GA TP 7050143 21550 10" 72" 17" 16-GA 7050067 10693 10-3/4" 72" 17" 14-GA TP 7050143 GA = Gauge ATP = Aluminum Tread Plate Notes Welded Back BODY & FRAME Part# 7050011 7050038 Fender Back 7050088 Included 7050062 7050060 7050060 WWW.TEXTRAIL.COM H-3 2010 Copyright by TexTrail, Inc. B O DY & F R A M E TANDEM FENDERS CONTINUED Ref # 10257 10291 10297 11073 10262 10268 10294 10276 10388 Width 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4" 13" Part# 7050015 Ref # 11472 Width 12" Part# 7050088 7050059 7050061 7050063 7050067 7050060 7050062 7050068 7050064 Ref # 10027 10026 10036 10037 10010 11046 10039 13150 11132 Width 12" 12" 12" 12" 12" 12" 12" 12" 14" Part# 7050070 Ref # 10342 Width 9" Part# 7050049 7050040 7050050 7050038 Ref # 10345 10344 10056 10349 Width 9" 10-3/4" 9" 10" Part# 7050089 Ref # 10054 Width 12" Tandem Axle 1" Radius Tear Drop Fender With 90° Lip Length Height Material Wheel Size Fender Back 66" 19-1/2" 16-GA 14" 7050088 72" 20" 14-GA TP 16" 7050062 72" 20-1/2" 0.100 ATP 16" 72" 20-1/2" 0.100 ATP 15" Included 72" 21" 16-GA 15" 7050060 72" 21" 16-GA 15" Included 72" 20-1/2" 14-GA TP 16" 7050062 72" 21" 16-GA 16" 7050060 72" 20-1/2" 16-GA 16" 7050060 Tandem Axle 1-1/2" Radius Tear Drop Fender With 90° Lip Length Height Material Wheel Size Fender Back 72" 20" 0.090 Smooth Alum Tandem Axle Fender Backs Length Material Notes 63" 18-GA 66-1/4" 18-GA Square Broke 69" 18-GA 69" 18-GA Square Broke Smooth Aluminum 71-3/4" 18-GA Double Square Broke 69" 16-GA 69" 14-GA TP 69" 14-GA TP Rectangle 72" 14-GA TP Double Square Broke GA = Gauge ATP = Aluminum Tread Plate Triple Fenders Length 108" Triple Axle 1" Radius Fenders With 90° Lip Height Material 21" 16-GA Wheel Size Triple Axle 1" Radius Tear Drop Fenders With 90° Lip Length Height Material Wheel Size 108" 21" 16-GA 108" 16-GA 108" 21" 14-GA TP 108" 21" 14-GA TP Triple Axle Fender Backs Length Material Notes 105" 18-GA WWW.TEXTRAIL.COM H-4 Notes Welded Back Welded Back Notes BODY & FRAME Part# 7050052 7050054 7050076 7050033 7050055 7050001 7050044 7050045 7050047 Fender Back 7050089 Notes Fender Back 7050089 7050089 7050089 7050064 Notes 2010 Copyright by TexTrail, Inc. B O DY & F R A M E FENDER COMPONENTS Part# Ref # Size Ball Corners Material Description 7500007 6311 6" x 6" 19-GA Steel Ball Corner 7500006 6310 12" x 12" 19-GA Steel Ball Corner Part# 7500030 7500031 7500206 Ref # 5012 5000 5323 Steel Nose / Roof / Wedge Caps Width Height Depth 60" 15" 37" 72" 15" 37" 80" 12" 30" Part# 7500043 7500044 Ref # 5079 12921 Width 5-1/2" 6" Radius 12" 12" 6" Material 19-GA 19-GA 19-GA Metal Slats Length 16' 20' Material 19-GA 18-GA Description Grooved Slat Pre-Formed Slat Straight Roof Bows Width 48" 60" 72" 80" 84" 96" 60" 72" 80" 84" 96" 60" 72" 80" 84" Radius 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 12" 12" 12" 12" Tube 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square Material 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA Radius 12" 12" 12" Tube 1" Square 1" Square 1" Square Material 16-GA 16-GA 16-GA BODY & FRAME Most Roof Bows are also available “Cambered” Part# 7500081 7500072 7500073 7500070 7500071 7500074 7500034 7500036 7500075 7500076 7500077 7500033 7500035 7500078 7500080 Ref # 64177 64127 64137 64087 64097 64157 6412 6413 6408 6409 6415 6410 6411 6407 6416 Height 7" 7" 7" 7" 7" 7" 8" 8" 8" 8" 8" 14" 14" 14" 14" Aerodynamic Part# 7500208 7500209 7500210 Ref # 5302-72 5302-80 5302-96 Length 30" 30" 30" WWW.TEXTRAIL.COM Nose Bows Width 72" 80" 96" H-5 2010 Copyright by TexTrail, Inc. B O DY & F R A M E Part# 7500024 7500017 7500018 7500020 7500193 7500022 7500025 7500023 Ref # 9AE 12AE 14AE 18AE 7NS 9NS 12NS 18NS Width 9" 12" 14" 18" 7" 9" 12" 18" 7500015 Aluminum & Non-Skid Gravel Guard Material Pattern Aluminum Diamond Aluminum Diamond Aluminum Diamond Aluminum Diamond Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black Description Gravel Guard Gravel Guard Gravel Guard Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard 5350247 5350245 Back View= Ref # 11189 78127 11197 11196 22130 22140 22150 22170 Length 83" 83" 83" 83" Per Foot Per Foot Per Foot Per Foot Part# 7500090 7500085 7500091 Ref # 64172 64315 64496 Tall 78" 80" 84" Part# 5350179 5350180 5300008 5300004 5300005 5350170 5350171 5300001 5300002 5350023 5350024 5300003 Ref # 71610RH 71610LH 11701LR 11324LH 11324RH 111810LH 111810RH 1534GL 1534GR 2034LH 2034RH 2430G Rockshield & Edge Guard Height Material 34" 0.10 Alum 34" 12-GA Smooth 43-1/2" 0.100 Alum 43-1/2" 12-GA Smooth 3/32" Flexible PVC 1/8" Flexible PVC 1/8" Flexible PVC 3/16" Flexible PVC Pipe Roof Bows Width Radius 72" 6" 80" 6" 84" 6" Gussets Descriptions 7" x 16-1/16" 10-Gauge Right Hand 7" x 16-1/16" 10-Gauge Left Hand 8-3/4" x 8-3/4" with 1" Lip Left or Right Hand 12-Gauge 10" x 8" with 1-1/2" Lip Left Hand 14-Gauge Tread Plate 10" x 8" with 1-1/2" Lip Right Hand 14-Gauge Tread Plate 11-1/4" x 18-1/2" 10-Gauge Left Hand 11-1/4" x 18-1/2" 10-Gauge Right Hand 15" x 34-3/16" with 1" Lip Left Hand 15" x 34-3/16" with 1" Lip Right Hand 20" x 34" x 3/16" Left Hand 20" x 34" x 3/16" Right Hand 24" x 30" x 1/4" Flat without Lip WWW.TEXTRAIL.COM H-6 Description Aluminum Diamond Plate Rockshield Steel Rockshield Aluminum Diamond Plate Rockshield Steel Rockshield Durable Clip-on Black Edge Trim Durable Clip-on Black Edge Trim Durable Clip-on Chrome Edge Trim Durable Clip-on Black Edge Trim Pipe 1-5/8" 1-5/8" 1-5/8" Material 16-GA 16-GA 16-GA Pipe Roof Bows 2010 Copyright by TexTrail, Inc. BODY & FRAME Part# 5350245 5350244 5350384 5350247 7500180 7500015 7500008 7500182 B O DY & F R A M E 8100148 8100149 5350211 5350085 Part# 8100148 8100149 5350210 5350211 5350082 5350371 5350392 5350085 Ref # 10499 10522 8128L 8128R 8147 8101 113LTBS 8122 5350082 5350371 5350210 5350392 Light Mounting Brackets / Protectors Description Left Hand Stop, Tail & Turn Light Protector Bracket Steel without License Light Right Hand Stop, Tail & Turn Light Protector Bracket Steel with License Light Left Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Right Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Stop, Tail & Turn Light / License Plate Bracket 5-3/4" x 7-3/4" Stop, Tail & Turn Light Protector Bracket Clearance Marker Light Bracket 5" Clearance Marker Stud Mounted Light Bracket Heavy Duty 12V 2-Speed Chrome Fan Part# Ref # Description 8720010 850 Heavy Duty 12V 2-Speed Chrome Fan with Swivel Base BODY & FRAME 7330003 Part# Ref # 7330031 468-4 Air Conditioning / Heat Pump Units & Ceiling Units Description Dometic Brisk Air Conditioning Unit Heating Kit for Non-Ducted Models. Use with 13,500 BTU Brisk Air Unit (7330003). White Color. 7330003 468 13,500 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color. 7330004 468-8 15,000 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color. 7330032 469-11 Dometic Brisk Air Conditioning Unit Heating Kit for Ducted Models. Use with 15,000 BTU Brisk Air Unit (7330004). 7330005 469-2 Air Conditioning Ceiling Unit with 5,600 BTU Heat Strip. Features Air Sweep*/Air Shower**. Compatible only with the 7330003 and 7330004 Outside Roof Units. AIR V Air Conditioner Dometic Cold or Hot Conditioning Air Distribution Box (ADB) Kit for Recreational Vehicles, campers, horse trailers, living quarters, etc. Use this Ceiling unit with Brisk Air Model Capable 13.5K (7330003) and 15K (7330004) BTU Roof Units. May also be used with 5.6K BTU Heat Kits 7330031 and 73300032. Brisk Air Model features Easy-to-reach controls, fully adjustable louvers, reusable filter and three-speed blower make it a breeze to deliver just the right amount of air with this traditional style ADB. 7330005 WWW.TEXTRAIL.COM H-7 2010 Copyright by TexTrail, Inc. B O DY & F R A M E Ref # 6501 Part# 7500055 7500061 7500215 Ref # 6265 6260 626T Part# 8290002 8290003 8290004 8290005 8290006 8290098 8290097 Ref # 2051 2158 1647 1646 2185 1659 1660 Part# 7500008 Ref # 18ET Part# 7500013 Ref # 118V Part# 7500050 7500052 7500131 Ref # 1923 1924 2625 7500057 7500055 8290004 WWW.TEXTRAIL.COM 7500008 H-8 7500052 7500131 BODY & FRAME Part# 7500057 Round Butterfly Vent Size Finish Description 7-1/2" Aluminum Round Butterfly Vent Pop-Up 2-Way Trailer Vents Type Finish Description Pop-Up Black Steel Vent with Gasket & Screen Pop-Up Aluminum Steel Vent with Gasket & Screen Plastic Black Trim Ring for 7500055 & 7500061 Dome Style Vents Type Finish Description Dome Vent 14x14 without Garnish Dome Vent 14x14 without Garnish with 12-Volt Fan Vent Cover Galvanized 14x14 Dome Vent Vent Cover White Plastic 14x14 Dome Vent Vent Garnish 1-7/8" to 3" Roof Dome Vent 14x14 White Crank Top with Screen Dome Vent 14x14 Metal Crank Top with Screen White Chrome Edge Trim - Durable & Flexible PVC Fits Description 1/8" Self-Adhesive Chrome Edge Trim Aluminum V-Trim Width Length Description 1-1/8" 12' Aluminum "V" Trim Chrome Trim with Lip Width Length Description 1" Per Foot Chrome Trim with Lip* 1-1/4" Per Foot Chrome Trim with Lip 1-5/8" Per Foot Chrome Trim with Lip * Same measurements except width as 7500052. 7500013 2010 Copyright by TexTrail, Inc. B O DY & F R A M E Part# 7500049 7500194 Part# 7500053 BODY & FRAME Part# 7500038 7500039 Part# 7500045 7500051 7500014 7500028 7500065 7500054 7500064 7500027 7500026 Part# 7500048 Part# 7500204 Part# 7500180 7500015 7500008 7500182 Chrome Flat Trim Ref # Width Length Description 6439 1-3/8" Per Foot Flat Aluminum Chrome Trim 4681 1" Per Foot Flat Aluminum Chrome Trim with Lip Polished Gravel Plate Trim Ref # Width Length Description 213 3/4" Per Foot Aluminum Gravel Plate Trim Polished Drip Rail Trim Ref # Width Length Description 688 3/4" Per Foot Aluminum Drip Rail Trim 788 1-1/4" Per Foot Aluminum Drip Rail Trim Polished Slot Series Insert Trim & Vinyl Inserts Ref # Width Length Description 1904 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 2605 1-1/4" Per Foot Aluminum Even Lip Insert Trim 3590 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 17BK 1" Per Foot Black Vinyl Trim Insert 17CB 1" Per Foot Brown Vinyl Trim Insert 17CW 1" Per Foot White Vinyl Trim Insert 17DB 1" Per Foot Blue Vinyl Trim Insert 17RD 1" Per Foot Red Vinyl Trim Insert 17SG 1" Per Foot Silver Grey Vinyl Trim Insert Inserts available in 750' Rolls Mill Finished Wall Board Trim Ref # Width Length Description 14287 0.800" Per Foot Wall Board Mill Finished Trim Mill Finished Floor / Wall Trim Ref # Width Length Description 9144 3/4" Per Foot Floor / Wall Trim - Aluminum Angle Ref # 22130 22140 22150 22170 Height 3/32" 1/8" 1/8" 3/16" Edge Guard Material Description Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Chrome Edge Trim Flexible PVC Durable Clip-on Black Edge Trim WWW.TEXTRAIL.COM H-9 7500049 7500053 7500194 7500038 7500039 7500045 7500051 7500014 INSERTS 7500048 7500204 7500015 2010 Copyright by TexTrail, Inc. B O DY & F R A M E WWW.TEXTRAIL.COM H-10 9420055 Torx® Bit BODY & FRAME Torx® Screwdriver Bit and Holder Part# Ref # Size Description 9420055 T14 Screw Bit Holder for Torx® Driver 1/4" Drive 9420053 T25 1/4" Torx® Hex Screw Bit for 3/16" Drive 7030163 T30 1/4" Torx® Hex Screw Bit for 1/4" Drive 9420054 T40 5/16" Torx® Hex Screw Bit for 1/4" Drive Torx® Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx® Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx® Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx® Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx® Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx® Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx® Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx® Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx® Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zinc—virtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool 9420052 2010 Copyright by TexTrail, Inc. B O DY & F R A M E FLOORING Rumber® is a extremely tough and durable material that is easy to clean and is perfect for trailer flooring and extreme conditions. It is stronger than other composites, is impervious to water, and is UV resistant. Rumber boards will not crack, rot, or split making your investment last longer. Rumber is environmentally friendly material, a natural choice for a number of specialized projects. It is the most cost-effective option to flooring. Rumber® Trailer Flooring BODY & FRAME Part# 7040030-06 7040030-07 7040030-08 7040030-10 7040030-16 7040030-20 7040030-24 7040033-06 7040033-07 7040033-16 7040033-20 Ref # 9102 9102 9102 9102 9102 9102 9102 9501 9501 9501 9501 Actual Dimensions Length Description 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5" 6' 7' 8' 10' 16' 20' 24' 6' 7' 16' 20' 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring Rumber® Wall Liner 7040010 200 48" x 96" x 0.200 4' x 8' x 3/16" Textured Black Rumber Wall Liner Sheet 7040011 250 48" x 96" x 0.250 4' x 8' x 1/4" Textured Black Rumber Wall Liner Sheet 7040012 350 48" x 96" x 0.350 4' x 8' x 11/32" Textured Black Rumber Wall Liner Sheet Rumber® Wheel Chocks 7040013 4121-8 8" Wheel Chock with Eye 7040014 4121-8H 8" Wheel Chock with Handle Rumber® Horse Trailer Accessories 7040015 9901-0 Black Textured Saddle Rack - No Holes 7040016 44618 4"W 29-1/2" Black Bridle Hook Rack 8-Hooks 7040017 20021 7"H x 6"D 17" Black Brush Tray 7040018 20022 7"H x 6"D 27" Black Brush Tray Rumber® Materials Installation Guidelines Application Rumber® Part Number Centers Screws Miscellaneous Truck / Platform Beds 9102, 9302 & 9502 Maximum 12” 2 Tongue & Groove must be tightly engaged. Livestock / Horse Trailers 9102, 9302 & 9502 Maximum 15” 2 Tongue & Groove must be tightly engaged. Trailer Ramps 9806 & 9808 Maximum 12” 2 Tongue & Groove must be tightly engaged. Cargo Van / ATVs 9805, 9807 & 9808 Maximum 12" 2 Shiplap must be engaged Utility Under 14,000 GVW 9102, 9302 & 9502 Maximum 12" 2 Tongue & Groove must be tightly engaged. Utility Over 14,000 GVW 9102, 9302 & 9502 Maximum 9" 2 Tongue & Groove must be tightly engaged. Rumber® is available in various sizes and textures. Contact your TexTrail Sales representative for complete installation requirements. WWW.TEXTRAIL.COM H-11 2010 Copyright by TexTrail, Inc. B O DY & F R A M E RUBBER MATTING Ribbed Pattern Diamond Plate Ref # 9148 9147 9020 9035 9040 3640 9045 4871 4712 4812 5712 Part# 8700021 8700019 8700020 8700009 Ref # 106196 31628 31631 4850 Part# 8700028 Ref # 121641 Part# 6700027 Ref # CO12 Part# 7500237 7500009 7040009 Ref # 100578 100579 200096 Rubber Floor & Wall Mats Length Description 60" Diamond Plate Pattern Rubber Floor Mat 84" Diamond Plate Pattern Rubber Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Diamond Plate Pattern Rubber Floor Mat 71" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat 96" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat Rubber Wall Mats Thickness Width Length Description 3/16" 53-1/4" 72" Rubber Wall Mat 3/16" 28" Per Foot Textured Rubber Wall Mat 3/16" 31" Per Foot Textured Rubber Wall Mat 3/16" 48" Per Foot Textured Rubber Wall Mat Rubber Ramp Mat Thickness Width Length Description 1/4" 48" Per Foot Ribbed Rubber Ramp Mat Rubber Mat Glue Size Description 15-OZ Red Spray Mat Glue Pre-Drilled Rubber Bumpers A B C D E* F* Bolt Size Description 2" 96" 2" 11-1/2" 5/8" 8 3/8" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 8 9/16" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 9 9/16" Rumber® Grooved Surface "D" Bumper Thickness 1/2" 1/2" 5/16" 5/16" 5/16" 5/16" 5/16" 1/2" 1/2" 1/2" 1/2" Width 48" 48" 24" 30 34" 36" 36" 48" 48" 48" 60" *E = Hole Size F = Number of Holes Part# 8300008 8300009 8300011 8300010 8300004 8300001 8300005 5350063 Ref # 118519 115341 121061 121062 161019 24303 2430 82123 Size 7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 19" x 24" 24" x 30" 24" x 30" 1/4" X 3" 7500009 Mud Flaps Description Dual Powder Coated Mud Flap Bracket Set 19" Single Powder Coated Mud Flap Bracket Set 12-1/4" Single Powder Coated Mud Flap Strap 12-1/4" Dual Powder Coated Mud Flap Strap 19" Rubber Mud Flap Rubber Mud Flap 3/16" Rubber Mud Flap 23" Mud Flap Mounting Bracket WWW.TEXTRAIL.COM H-12 2010 Copyright by TexTrail, Inc. BODY & FRAME Part# 8700018 8700011 8700001 8700002 8700003 8700004 8700015 8700016 8700010 8700013 8700007 Flat Mat B O DY & F R A M E FRAME AND BODY COMPONENTS The 7500059 fits conveniently in the corner of your walk-in-tack room utilizing the “dead space”. It features a fill hole with a vent at the top of the tank for easy filling. Located at the bottom the tank is a shut off valve to hook your hose to for filling water buckets. The optional stand (7500058) will place the tank higher for easier access to the shut off valve and compartment for out-of-the-way storage of your hose. Part# 7500059 7500058 BODY & FRAME Part# 7180002 7180003 7180004 Water Caddy Ref # Thickness Width Length Description SL-25 1/2" 48" 60" 25-Gallon Corner Water Caddy 14.5" x 56" 3-Sided SL-STD 1/2" 48" 84" 11-1/2" Water Caddy Stand with Storage Compartment Landscape Boxes Ref # Height Depth Length Description 242464 24" 24" 64-1/2" Painted Landscape Box for 5' Wide Trailers 242481 24" 24" 81-1/2" Painted Landscape Box for 6-1/2' Wide Trailers 242487 24" 24" 87-1/2" Painted Landscape Box for 7' Wide Trailers See Cargo Control Section for more Landscape & Trailer Accessories (Hooks, Racks, etc). Part# 8600011 8600012 8600013 Ref # 444 451 712 Height 6' 6' 7' Width 44" 51" 1' Aluminum Portable Ramps Capacity Description 1.5K Aluminum Bi-Fold Ramp 1K Aluminum Tri-Fold Ramp 1.5K Arched Pair Aluminum Ramps Water Cooler Rack Part# Ref # Description 6080003 8500 Weldable Water Cooler Rack WWW.TEXTRAIL.COM H-13 2010 Copyright by TexTrail, Inc. B O DY & F R A M E RAMPS AND LIFT ASSISTS 7180005 7180030 7180007 Ref # RA1548 RF1148 RF1160 RF2060 RF2096 RCH1587 RCH1596 RC1587 RT1472 RT1584 RFU1860 RFU1560 Width 15" 11" 11" 20" 20" 15" 15" 15" 14-1/2" 15" 18" 15" Depth 3" 2" 2" 2" 2" 3" 3" 3" 2" 17"@Heel 3" 7180009 Length 48" 48" 60" 60" 96" 87" 96" 87" 72" 84" 60" 60" Description Black Painted Angle Ramp with 1-1/2" Lip Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp Diamond Plate w/ Stiffeners Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Plate 1-1/2" Lip Black Painted Tube Ramp with 1-3/4" Lip Black Painted Tube Ramp with Plate Black Painted Heavy Duty Fold-Up Ramp Black Painted Fold-Up Channel Ramp with Adjustable Leg Double Barrel “Chain Driven” Trailer Gate Assist has a unique two spring design for extra power. Raise and lower your trailer tail gate with just one finger!! Shortest unit on the market, takes the least amount of railspace. Lowest price tail gate assist in its class. Reduces 134 pound gate to less then 5 pounds. 7180120 Part# 7180120 Ref # RA-27 Rail Space Description 10" - 15" Chain Driven Double Barrel Trailer Gate Assist WWW.TEXTRAIL.COM H-14 2010 Copyright by TexTrail, Inc. BODY & FRAME Part# 7180005 7180006 8600008 7180022 7180014 7180007 7180013 7180012 7180010 7180011 7180009 7180030 7180006 B O DY & F R A M E RAMP GATE ASSEMBLIES 7180019 BODY & FRAME 7180018 Part# 7180015 7180056 7180018 7180019 7180017 7180023 7180055 Ref # RGA5038 RGA6039 RGA6051 RGA7751 RGA8351 RGA8351 RGA8365 Width 50" 60" 60" 77" 83" 83" 83" Height Description 38" Painted Rampgate Assembly 36" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly with Integrated Ramps 65" Painted Rampgate Assembly Ramp & Ramp Gate Assembly Installation Components Description Part# 3670021 4000002 5350061 7300029 7300030 7300031 7300043 7400001 7400008 5350260 8200027 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007 8600006 8600007 Ref # 2134 8807 7818 66010 83910 781 771 14001 1808 5357 2595 CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316 RS375 RS437 Rampgate Pipe Hinge 6"L x 3/4"ID Round Bar 3/4" OD x 10" Long Rampgate Latch Bracket 3/16" x 2-1/2" x 2-1/2" Linch Pin 7/16" x 1-3/4" Long Yellow Zinc Plated Linch Pin 7/16" x 1-3/4" Long with 10" Lanyard Rampgate Pin with Threaded Shank 7/8" x 1-1/8" 9/16" x 1-1/2" Rubber Washer Gasket 1-3/8" OD x 1/8" Rampgate Brass Hinge 25/65" Pin 4" Long Rampgate Butt Hinge 0.207 x 2-1/2" x 2-1/2" 0.089 Gauge Rampgate Handle 3/16" x 1" x 8" Long Latch Assembly 1/2" Spring 3-7/8" Handle Length Zinc Plated Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16" Ramp Spring 3/8" Diam 14-1/4" Long Ramp Spring 7/16" Diam 15-1/2" Long Part# 7180020 7180059 7180118 7180060 7180019-02 7180119 7180019-03 7180054 7180016 7180061 7180038 7180117 Ref # RG5451 RG6027 RG6051 RG7727 RG7736 RG7751 RG7760 RG7765 RG7839 RG8327 RG8351 RG8351 Width 54" 60" 60" 77" 77" 77" 77" 77" 78" 83" 83" 83" Height 51" 27" 51" 27" 36" 51" 60" 65" 39" 27" 51" 51" 8530005 5350061 8530003 8530002 5350253 8600006 Replacement Ramp Gates Description Painted Rampgate Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Painted Rampgate Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose WWW.TEXTRAIL.COM H-15 2010 Copyright by TexTrail, Inc. B O DY & F R A M E Part# 7180025 Ref # TTFURK Quantity 1 3700001 5350092 5350216 5350219 5350253 5350345 5350346 7030091 8600006 2111 42125 81625 38678 CP2382 11195 11325 64315 RS375 1 1 2 2 2 1 1 2 1 8200034 Ramp & Ramp Gate Assembly Installation Components Description Fold-Up Ramp Hardware Kit Consisting of the following items: Rotator Pipe 1-1/2" Diam x 14-1/4" Long Tailboard Center Link 3/8" x 2-1/8" x 4" Long Tailboard Fixed Link 3/8" x 3" x 8" Long Tailboard Rotating Link 3/8" x 6-7/8" x 9" Long Cap Plug 2-3/8" Round 1/8" Ramp Rod 19-1/2" Long Ramp Rod 32-1/2" Long Roll Pin 3/8" x 2" Long Zinc Plated Ramp Spring 3/8" Diam 14-1/4" Long 8200033 8200005 8200003 Part# 8200034 8200033 8200003 8200004 8200005 8200027 8200001 8200099 Part# 9250097 9250096 7180150 7180151 7180152 7180153 Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196 7030197 Latches & Stake Components Description Paddle Handle Tipper Latch Assembly Zinc Plated Weldable Spring Loaded Center Pop-Up Latch 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 1/2" Spring Latch Assembly 3-7/8" Handle Length Zinc Plated 1/2" Spring Latch Assembly with Keeper 1/2" Spring Latch Assembly without Keeper 6-1/2" X 1-9/16"Wide Zinc Plated 1-1/2" x 3" Load Plate Stake Pocket Ref # Width Depth Height Gauge Description STK02 3-1/2" 1-1/2" 3" 4 Stake Pocket STK01 3-1/2" 1-1/2" 3" 8 Stake Pocket Ramp Springs - 90° Leg Position Ref # Description SB0230 1-1/2" Max Shaft LH Ramp Spring 0.375 Wire SB0230R 1-1/2” Max Shaft RH Ramp Spring 0.375 Wire 7180085 7180153 Ramp Springs - 180° Leg Position RS112L 1-1/2" Max Shaft LH Ramp Spring 0.468 Wire RS112R 1-1/2" Max Shaft RH Ramp Spring 0.468 Wire RS200L 2" Max Shaft LH Ramp Spring 0.500 Wire 7180150 7180152 RS200R 2" Max Shaft RH Ramp Spring 0.500 Wire Drill Bits Ref # Type Diam. Length Twist Description 18JDB Jobber 1/8" 2-3/4" 1-5/8" Drill Bit 532JDB Jobber 5/32" 3-1/8" 2" Drill Bit 1164JDB Jobber 11/64" 3-1/4" 2-1/8" Drill Bit 316JDB Jobber 3/16" 3-1/2" 2-5/16" Drill Bit 1364JDB Jobber 13/64" 3-5/8" 2-7/16" Drill Bit 732JDB Jobber 7/32" 3-3/4" 2-1/2" Drill Bit 14JDB Jobber 1/4" 4" 2-3/4" Drill Bit 38JDB Jobber 3/8" 5" 3-5/8" Drill Bit 532NDB Nitro 5/32" 2-1/16" 1" Drill Bit 316NDB Nitro 3/16" 2-3/16" 1-1/8" Drill Bit 38NDB Nitro 3/8" 3-1/8" 1-13/16" Drill Bit 18SDB Stubby 1/8" 1-7/8" 7/8" Drill Bit 964SDB Stubby 9/64" 1-15/16" 15/16" Drill Bit 532SDB Stubby 5/32" 2-3/16" 1" Drill Bit 1164SDB Stubby 11/64" 2-1/8" 1-1/16" Drill Bit 316SDB Stubby 3/16" 2-3/16" 1-1/8" Drill Bit 1364SDB Stubby 13/64 2-1/4" 1-3/16" Drill Bit 732SDB Stubby 7/32" 2-3/8" 1-1/4" Drill Bit Ref # 5240 2598 2589 2588 2591 2595 2595 2575 WWW.TEXTRAIL.COM H-16 2010 Copyright by TexTrail, Inc. BODY & FRAME Part# 7180085 7180086 8200099 8200004 B O DY & F R A M E TRAILER/TRUCK BOXES BODY & FRAME 9450500 Part# 9450500 9450501 9450502 9450503 9450504 9450505 9450506 9450507 9450508 9450509 9450510 9450550 9450551 9450552 9450553 9450554 9450555 9450556 9450557 9450558 9450559 9450560 9450561 9450562 9450563 9450565 Part# 9450580 9450581 9450582 9450583 9450585 9450586 9450587 9450588 Ref # UB151015R UB151024R UB151515R UB151524R UB151530R UB151536R UB151548R UB181824R UB181830R UB181836R UB181848R UB151015T UB151024T UB151515T UB151524T UB151530T UB151536T UB151548T UB181824T UBW181824T UB181830T UB181836T UBW181836T UB181848T UBW181848T UBDD151573T Ref # Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody ALUB181836T Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Part# Ref # Description 9450650 UBB15 15" Underbody Box Bracket 9450651 UBB18 18" Underbody Box Bracket Part# 9450603 9450704 Ref # ALUB181818R ALUB181824R ALUB181830R ALUB181836R ALUB181818T ALUB181824T ALUB181830T ALTGBX PCTGBX Type Tongue Tongue 9450501 14-Gauge Steel Underbody Box Handle Finish Height Depth SS Rotary Powder Coat 15" 10" SS Rotary Powder Coat 15" 10" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS T-Handle Powder Coat 15" 10" SS T-Handle Powder Coat 15" 10" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 15" 15" Aluminum Underbody Box Handle Finish Height Depth SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" Underbody Box Mounting Brackets Handle SS Paddle SS Paddle WWW.TEXTRAIL.COM 9450565 Width 15" 24" 15" 24" 30" 36" 48" 24" 30" 36" 48" 15" 24" 15" 24" 30" 36" 48" 24" 24" 30" 36" 36" 48" 48" 73" Description Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box White Truck Tack Box White Truck Tack Double Door Box Width 18" 24" 30" 36" 18" 24" 30" 36" Description Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Width 20" 20" Description Tongue Box Aluminum 33"W in Back Tongue Box Black Steel 33"W in Back 9450603 14-Gauge Tongue Boxes Finish Height Depth Aluminum 21" 16" Powder Coat 20" 16" H-17 2010 Copyright by TexTrail, Inc. B O DY & F R A M E TRAILER/TRUCK BOXES CONTINUED 9450700 Part# 9450700 9450701 9450702 9450703 Ref # PCACRSB PCTMSB PCGBX PCGBX Type Across Bed Specialty Specialty Specialty Handle SS Paddle SS Paddle SS Paddle SS Paddle 9450600 Part# 9450600 9450601 9450602 Ref # STOW RKMTAB RKMTAB 9450702 9450701 Type Specialty Specialty Specialty 14-Gauge Steel Specialty Boxes Finish Height Depth Width Powder Coat 18" 25-1/2" 68-1/2" Powder Coat 8" 20" 60" Powder Coat 13" 14-1/2" 36" Powder Coat 13" 14-1/2" 48" 9450703 Description Black Steel Across The Bed Box Black Steel Top Mount Shovel Box Black Steel Lightweight Gear Box Black Steel Lightweight Gear Box 9450602 Handle SS Paddle SS Paddle SS Paddle 6450601 Aluminum Specialty Boxes Finish Height Depth Width Description Aluminum 17" 20" 48" Stowaway Box Aluminum 13" 12" 36" Rack Mount Aluminum All Terrain Box Aluminum 8" 12" 36" Rack Mount Aluminum All Terrain Box BODY & FRAME 9450098 Part# 9450098 9450097 9450099 9450096 Ref # TST21TTB TST21TTBBK TST16TTB TST16TTBBK Type Tongue Tongue Tongue Tongue Handle SS Paddle SS Paddle SS Paddle SS Paddle 22-Gauge Steel Tongue Boxes Finish Height Depth Powder Coat 23" 15" Powder Coat 23" 15" Powder Coat 18-3/4" 19" Powder Coat 18-3/4" 19" 9450160 Part# 9450160 9450161 9450096 9450099 Width 21" 21" 16" 16" Description White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back 9450161 Ref # TALVST50 TALVST50BK Type Vertical Vertical Handle 50 Gallon 50 Gallon WWW.TEXTRAIL.COM Liquid Storage Tanks Finish Height Depth Aluminum 19" 14" Aluminum 19" 14" H-18 Width Description 64" Brite Finish Tradesman Liquid Storage Tank 64" Black Tradesman Liquid Storage Tank 2010 Copyright by TexTrail, Inc. BODY & FRAME B O DY & F R A M E Part# 6900203 6900143 6900144 6900134 6900201 6900210 6900202 6900209 6900211 6900200 Ref # DTR5012 DTR7018 DTR6518 DTR7518 DTR6014 DTR6515 DTR7012 DTR7015 DTR7515 DTR8022 Type Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh Width 5' 7’ 6.5’ 7.5’ 6' 6-1/2' 7' 7' 7-1/2' 8' Part# 6900206 6900164 6900142 6900138 6900204 6900207 6900205 Ref # 3011034 n/a 3008210 3009456 3009455 3011036 3009892 Type Mesh Mesh Mesh Mesh Mesh Mesh Mesh Width 5' 6.5’ 7’ 7’ 6' 7' 8' Part# 9250321 9250322 9250323 9250118 9250324 9250119 Ref # RTS9 RTS15 RTS21 RTS21H RTS31 RTS31H Type Rubber Rubber Rubber Rubber Rubber Rubber Length 9" 15" 21" 21" 31" 31" Please Call Your Local TexTrail Trailer Parts Representative For Hoist Replacement Parts 6900078 Part# 6900078 6900075 6900072 6900069 6900061 6900137 Ref # PH-310 PH-416 PH-516 PH-625 PH-630 PH-520 Part# Ref # 6900153 6900154 6900155 Dump Tarp Kits Length Hardware Description 12' Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 14' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 12' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 22' Included Dump Tarp & Hardware Kit Replacement Dump Tarps Length Description 12' Dump Tarp Only 15’ Dump Tarp Only 15’ Dump Tarp Only 18’ Dump Tarp Only 14' Dump Tarp Only 12' Dump Tarp Only 22' Dump Tarp Only Dump Tarp Straps Description Tarp Strap Tarp Strap Tarp Strap Heavy Duty Tarp Strap Tarp Strap Heavy Duty Tarp Strap Hydraulic Hoist Kits Description Hoist Kit with Hinges & Prop Assy - TB-8 Hoist Kit with Hinges & Prop Assy - TB-10 Hoist Kit with Scissor Lift, Hinges & Prop Assy - TB-12 Hoist Kit with Hinges & Prop Assy - TB-18 Hoist Kit with Scissor Lift, Hinges & Prop Assy - TB20 Hoist Kit with Scissor Lift, Hinges & Prop Assy T- B14 Hydraulic Hoist Power Units Use With Description DC-4675 TB-8,TB-10,TB12,TB-16 DC-4679 TB-16,TB18,TB-20 dc4676 TB-8,TB-10,TB12,TB-16,TB16,18,TB-20 6900155 PSI Pump Reservoir Hydraulic Single Acting 12VDC Dump Trailer Pump 3200 Single 8-QT Poly Offset Hydraulic Single Acting 12VDC Dump Trailer Pump 3200 Single 16-QT Poly Offset Hydraulic DoubleActing 12VDC Dump Trailer Pump 3200 Double 8-QT Poly Offset WWW.TEXTRAIL.COM H-19 2010 Copyright by TexTrail, Inc. B O DY & F R A M E Trailer Tarp Kits • Heavy-duty double stitch hem. • All hems reinforced with nylon webbing • Full perimeter brass grommets • Cast bearings and zinc plated hardware • Extruded aluminum cross bars telescope exact bed width of dumps & trailers up to 102” wide. • Folding crank handle with detent latch. • 22’ pull rope included BODY & FRAME 6900153 Call TexTrail for your hydraulic pumps or a full line of replacement dump parts. 6900154 6900155 WWW.TEXTRAIL.COM H-20 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S HARDWARE & LOCKS Table Of Contents - Hardware & Locks Back-Up Assist Camera Bar Lock Assembly Bumpers Butt Hinge Butterfly Latch Cab Lock Handles Cab Slam Locks Cam Lock Assembly Cap Plugs Catch / Pull Latch Chains Continuous Hinges Dead Bolt Flush Latch Door Holdbacks Door Holders Drill Bits D-Rings "D" Bumpers Flush Latches Flush Mount Hinges Handles (Cab Lock) Handles (Grab) Hasp Hinge Pin Hinges Hitch Pins Hood Latch Hooks Latches Linch Pins Links Locks Paddle Latches Pins (Hitch, Linch & Snapper) Receiver Hitch Pins Receiver Locks Rivets & Rivet Tools Rope Rings Rubber Bumpers Safety Chains Slam Locks Snapper Pins Spare Tire Carrier / Mount Spring Loaded Latches Stake Components Stake Pocket Steps (Folding & Weld-On) Strap Hinges Suitcase Latch T-Handle Latches Tie Loops Tipper Latch Torx® Head Self Tapping Floor Screws Torx® Screw Bits & Holder Towing Mirror WWW.TEXTRAIL.COM J-1 J-12 J-5 J-11 J-3 J-9 J-5 J-5 J-5 J-11 J-9 J-17 J-3 J-4 J-6 J-6 J-11 J-7 J-11 J-4 J-3 J-5 J-2 J-5 J-3 J-2 J-8 J-4 J-8 J-4 & J-9 J-9 J-8 J-12 J-4 J-8 & J-9 J-8 J-12 J-10 J-7 J-11 J-18 J-5 J-9 J-2 J-9 J-11 J-10 J-2 J-3 J-9 J-4 J-9 J-9 J-10 J-10 J-2 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Towing Mirror Part# Ref # Description 8850200 3096 X-Large Clip-On Towing Mirror Grab Handles & Steps Part# 7300208 7300205 5350719 5350605 5430095 Ref # 875SS GHC213 GHM385 GHM7165 27818 Description Stainless Steel Folding Step Pad 2-3/16" x 4-3/8" Bolt-On Steel Chrome Plated Grab Handle 1/2" Dia. x 13" Weld-On Metal Grab Handle 3/8" Dia. x 5" Weld-On Metal Grab Handle 7/16" Dia. x 5" Weld-On Painted Steel Trailer Bed Step 12"W x 18"H x 5"D 7300208 5430095 7300205 Spare Tire Carriers Part# 8900009-01 8900010-01 8900003 8900002 8900004 Ref # 6220 6280 HDSTC STC100 TTSTC100 Description Spare Tire Carrier Kit 4 & 5 Hole Wheels without Bracket Padlock Spare Tire Carrier Kit 4 & 5 Hole Wheels with Bracket Padlock Spare Tire Carrier Kit 3 x 5 Tongue 4-3/4" Lift 7" Offset with Hardware Spare Tire Carrier Kit 3 x 4 Tongue 4-3/4" Lift 7" Offset Spare Tire Carrier Kit Weld-On 4& 5 Hole Wheels Finish Zinc Zinc Zinc Zinc Painted Hardware Included Included Included Included Included HARDWARE & LOCKS 8900009-01 890010-01 8900002 8900003 8900004 Locks Part# 8200158 8200177-01 8200185 8200141 8200096 Ref # UMAX50 TTRL583 DL-80 3DAT TL-45 Description Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers 5/8" x 4-1/2" Locking Hitch & Coupler Pin Set - Keyed Alike Cam Lockrod Door Lock & Keeper - Keyed Alike Laminated Steel Master lock Padlock 1-9/16" Wide Heavy Duty Shielded Padlock 2-3/4" Diameter * More locks on page J-12 * 8200173 8200177-01 8200185 8200141 WWW.TEXTRAIL.COM J-2 8200096 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Strap & Flush Mount Hinges Part# 7400028 7400147 7400021 7402212 7402512 7402008 7404022 Ref # 104 1002 1003 2212 2512 2008 4022 7400028 Part# 7400051 Description Chrome Cast Flush Mount Hinge with 5/16" Stainless Steel Pin 3-1/4"W x 6" L Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Left Hand Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Right Hand Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 270° Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 180° Zinc Plated Strap Hinge with 8-31/32" L from Pin to End with 3-Hole Bracket 10-1/4" Overall Length Zinc Plated Flush Mount Strap Hinge with 1-3/4" W Strap x 12" L over Gasket 270° 7400147 Ref # A1808 OAW 2-1/4" 7402008 7402212 Strap Hinge with Grease Fitting OAL OAH Gauge 3-9/32" 2-1/2" 0.307" 7402512 7404022 Description Heavy Duty Strap Hinge HARDWARE & LOCKS 7400011 Part# 7400007 7400008 7400014 7400016 7400018 Ref # A1808 B1808 C1808 E1808 124 Size Pin Gauge 2" x 2" 3/16" 3/16" 7/32" 9/32" 1/8" 0.082" 0.089" 0.092" 0.130" 2-1/2" x 2-1/2" 3" x 3" 4" x 4" 4" x 4" Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Stainless Steel Description Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Fixed Steel Hinge Pin with Grease Zerk Part# 7300003 Part# 7400033 7400002 7400005 7400009 7400017 7400015 Ref # W400 Ref # Description 2-Piece Weld-On Steel Pin with Brass Grease Fitting 4-1/2" Overall Length x 3/4" Dia Body x 1/2" Dia Pin Finish SS51515 Stainless Steel S41 14-GA Steel A473 11-GA Steel S43 14-GA Steel S50 14-GA Steel A317-1 14-GA Steel 6' Continuous Hinge - No Holes Open Width Pin Gauge 1-1/2" 1-1/2" 2" 2-1/2" 3" 3-1/2" WWW.TEXTRAIL.COM 1/8" 3/16" 3/8" 3/16" 1/4" 1/4" J-3 Knuckle 0.050" 0.075" 0.500 1.000 0.075" 0.075" 1.000 1.000 1.000 Description Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S 8200136 Part# 8200038 8200037 8200239 8200036 8200240 8200136 8200245 8200264 8200265 8200030 8200031 8200242 8200025 8200243 8200064 8200038 8200036 Ref # L9015 N9015 R9015 S9015 T9015 T2600 T1100 T600 T2800 L9018 N9018 K510 K545 L625 39LC Finish Plain Plain Plain Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Plain Plain Type Junior Junior Junior Junior Junior T-Handle T-Handle T-Handle T-Handle Large Large Flush Latches Hole Size 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-7/8" x 3-5/8" 2-7/8" x 3-5/8" 2-3/8" x 3-1/8" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16" 8200243 7500140 8200042 7500142 Chrome Flush Mount Dead Bolt & Locking Paddle Latch Part# Ref # Description 7500140 13631 Outer Dead Bolt / Paddle Latch 7500142 14901 Outer Locking Paddle Latch 7500141 11706 Inner Dead Bolt for 7500140 7500143 10953 Inner Latch Flat Plate Hood Latches Part# Ref # Description 8200002 WJ96 Spring Loaded Pivot Hood Latch - Black Finish 8200035 WJ94 Spring Loaded Pivot Hood Latch - Chrome Plated 8200016 WJ91 Straight Hood Latch - Stainless Steel 8200182 WJ99 Catch Plate - Black Finish 7300073 WJ93 Catch Plate - Chrome Plated 8200015 WJ90 Catch Plate - Stainless Steel 8200042 35R Rubber Hood Latch with Zinc Hardware WWW.TEXTRAIL.COM J-4 2010 Copyright by TexTrail, Inc. HARDWARE & LOCKS 8200016 8200265 Description Locking Paddle Latch Non-Locking Paddle Latch Locking Inside Release Paddle Latch Locking Paddle Latch Locking Inside Release Paddle Latch Locking T-Handle Latch Single Point Folding Locking T-Handle Latch Double Point Folding Locking T-Handle Latch Truck Bed / Tool Box Locking T-Handle Latch Truck Bed / Tool Box Locking Paddle Latch Non-Locking Paddle Latch Replacement Key Only for 510 Lock Replacement Key Only for 545 Lock Replacement K545 Key & Tumbler for Jr Paddle Latch Replacement LL71 Key & Tumbler for Jr Paddle Latch 7500141 7500140 8200002 8200030 H A R D WA R E & LO C K S Side Door Bar Lock Assembly Part# 7300004 Ref # 15736 Description 36" x 18" Bar Lock Assembly (includes Welded Bar Lock Assembly, Hasp Keeper, & PVC Handle Grip) Universal Cam-Door Lock Assembly Part# 8200068 8200061 8200129 8200188 8200108 8200022 8200183 8200128 7300075 Ref # 470 401 158202 158207 100 101 158202 158203 100C Description Cam Door Lock Kit 3/4"ID Aluminum Shaft (excludes pipe) Cam Door Lock Kit 3/4"ID Zinc Shaft (excludes pipe) Replacement Top Keeper Zinc Replacement Top Lug Zinc Replacement Handle for Cam Door Lock Kit* Zinc Replacement Riveted Hasp Assembly 1-Piece Zinc Replacement Bottom Lug Zinc Replacement Bottom Keeper Zinc Replacement Rubber Grip for Handle 8200061 HARDWARE & LOCKS 8200068 *Includes Rubber Grip To order replacement parts for the 8200068 Aluminum CAM Lock please notify your sales representative. Cab Lock Handles Part# Ref # Description 8200130 276 Locking Handle 1/4" "L" Shaft with Lock & Keys 8200135 277 Non-Locking Handle 1/4" "L" Shaft 8200133 777 Locking Handle 1/4" "T" Shaft with Lock & Keys 8200133 8200135 8200130 7500148 7500148 11369 Locking Cargo Handle 1/2" "L" Shaft with Lock & Keys 8200266 81820 Door Handle Cam Surface Mounted Cab / Slam Locks Part# Ref # Description Finish Width Height These surface-mounted 8200007 58LH Left Hand Cab Slam Latch Zinc 2” 3-3/8” 8200006 58RH Right Hand Cab Slam Latch Zinc 2” 3-3/8” Cab Locks can be used with the 1/4”‘L’ or ‘T’ handles. Hasp Part# 8200066 8200021 8200022 8200029 8200215 Ref # 30314 32 101 295 8025 Description Hasp & Staple Riveted Pin 3-1/4" x 1-1/2" Zinc Hasp & Swivel Staple 3" Zinc CAM Lock Hasp 1-Piece Riveted Zinc Hasp & Staple Kit 7-Piece Zinc Hockey Puck Internal Shackle Hasp 2-Piece Chrome WWW.TEXTRAIL.COM J-5 8200066 8200029 8200022 8200021 8200215 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S 7500155-02 7500154 7500153 7500156 7500146 7500190 7500145 7300085 / 7300078 7300201 7300206 7500203 7500155 7500144 7300200 / 7500029 7500150 7300005 7500149 7300038 Door Holders & Hold-Backs Ref # 38R DHS DH1 39R DH2 ADH2 ADH4 DH100 DH101 ADHR2 600 604SS 605SS 606SS 294 296 2910 602 60202 603SS 603 PH8ZN P1016 Size 1" 1" 2" 2" 2" 4" 2-9/16" 2-1/2" 1-11/32" 1-1/2" 2-1/2" 3-1/2" 4" 6" 10" 2" 4" 4" 4" 6" WWW.TEXTRAIL.COM Door Holder Plastic Stem with Rubber Socket Door Holder Rubber Socket for 1" or 2" Long Plastic Door Stem Door Holder Plastic Stem Only for 7300201 Door Holder Plastic Stem with Rubber Socket Door Holder Plastic Stem Only for 7300201 Spring Loaded Catch & Door Holder 2-Piece Aluminum Spring Loaded Catch & Door Holder 2-Piece Aluminum Door Holder with Rubber Insert Socket Zinc Rubber Insert Only For 7300206 Socket Door Holder Stem Aluminum with Rubber Cap Door Holder White Nylon Socket White 0.090" Thick Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver 90° Wire Door Holder with Female Receiver Zinc 45° Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Spring Loaded Female Receiver Stainless Steel T-Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Female Receiver Zinc Base for Wire Door Holders & Receivers J-6 2010 Copyright by TexTrail, Inc. HARDWARE & LOCKS Part# 7500144 7300201 7300202 7300203 7300204 7300085 7300078 7300206 7300207 7500155-02 7500153 7500154 7500155 7500156 7500145 7500146 7500190 7300005 7300038 7500149 7300200 7500029 7500150 H A R D WA R E & LO C K S Tie Loops Part# Ref # Description Diameter I.D. Style Application 7500157 TLA122 Tie Loop - Aluminum 1/2" 2" Round Bolt-On 8850009 TL12R Tie Loop - Metal 1/2" 2" Round Weld-On 5350715 TLM3812 Tie Loop - Metal 3/8" 1/2" Bent Weld-On 5350147 TLM7161 Tie Loop - Metal 7/16" 1" Bent Weld-On 5350146 TLM121 Tie Loop - Metal 1/2" 1-1/2" Bent Weld-On 5350716 TLM3821 Tie Loop - Metal 3/8" 2-1/4" Square Weld-On 5350222 TLM3811 Tie Loop - Motor Cycle Tie Down 3/8" 1-1/4" Bent Weld-On 8850109 TLM382 Tie Loop - Metal 3/8" 2" Bent Weld-On 5350719 GHM385 Grab Handle - Metal 3/8" 5" Square Weld-On 5350605 GHM7165 Grab Handle - Metal 7/16" 5" Square Weld-On 5350605 5350719 5350716 8850009 8850109 5350715 7500157 5350147 5350146 5350222 HARDWARE & LOCKS D-Rings & Rope Ring Safe Working Load Part# Ref # Description 7500158 TL178AB 9250089 B20 Rope Ring - 1/4" dia. steel zinc. 800 LB 9250088 B601 Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole 285 LB 9250087 B703 Rope Ring - 1/4" dia. steel zinc w/bazel 800 LB 9250019 DR-12W D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS* 4080 LB 9250035 DR-12B D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS* 4080 LB 9250036 DR-58W D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS* 6K 9250016-02 J707 D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA 15.5K 9250016 B48 D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* 2K 9250034 B801A Rope Ring - Recessed Zinc 3-5/8" hole 6K USB* 2K 9250033 B901 Rope Ring - Recessed Zinc 360° Rotating 6K USB* 2K Rope Ring - 7/16" dia. Aluminum bolt-on with bracket 7500158 1K 9250089 9250088 9250087 9250034 *Ultimate Breaking Strength 9250035 9250036 9250019 9250016-02 9250033 WWW.TEXTRAIL.COM J-7 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Grab & Slip Hooks Part# Ref # Description 8850072 GH14 1/4" Grab Hook 7,800 UBS* 8850073 GH516 5/16" Grab Hook 11,700 UBS* 8850074 GH38 3/8" Grab Hook 16,200 LB UBS* 8850097 SH14 1/4" Slip Hook w/ Latch 7,800 UBS* 8850017 SH516 5/16" Slip Hook w/ Latch 11,700 UBS* 8850016 SH38 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Part# Ref # Description 8850090 162S Snap Hook - Double-End 3-1/2" x 5/8" 8850091 225 Snap Hook - Swivel 3-1/2" x 5/8" 8850092 231 Snap Hook - Open End 3-1/2" x 3/8" 7300045 316QL Quick Link - 3/16" 616 LB UBS* 9250401 516QL Quick Link - 5/16" 1540 LB UBS* 9250012 38QL Quick Link - 3/8" 1900 LB UBS* 9250403 12QL Quick Link - 1/2" 2650 LB UBS* 9250400 14QL Quick Link - 1/4” 3500 LB UBS* 9250368 516SL Chain Spring Link 5/16” Zinc 350LBS WWL 9250369 38SL Chain Spring Link 3/8” Zinc 425LBS WWL 8850105 316S S Hook 3/16” 350LB Zinc 8850106 14S S Hook 1/4” 567LB Zinc 8850018 716S S Hook - 7-16" 5K 8850019 716SC S Hook - 7-16" 5K w/ Catch 8200146 1270 Spring Link - Bulk 100 pk *Ultimate Breaking Strength Safe Working Load 2,600 LB 3,900 LB 16,200 LB 7,800 LB 11,700 LB 16,200 LB Grade G43 G43 G43 G43 G43 G43 GRAB 8850090 8850091 SLIP 8850092 SPRING QUICK Hitch Pins Part# Ref # Finish Size Description 7350209 F-4 Zinc 1/2" 105° Bent Receiver Pin 2-5/8" Long with Retaining Clip 7350315 F-5 Zinc 5/8" 105° Bent Receiver Pin 3" Long with Retaining Clip 7350062 F-6 Zinc 5/32" Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins 7350264 211HP Zinc 1/8" Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins 8200354 2866DAT Chrome 1/2” or5/8" 7350314 F-500 Zinc 5/8" 105° Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes 7300002 66100 Zinc 1/2" Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip 7300013 66105 Zinc 5/8" Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip 7300066 66110 Zinc 3/4" Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip 7300014 66115 Zinc 3/4" Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip 7300015 66125 Zinc 1" Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip 1/2” or 5/8” Receiver Lock Chrome Bent Pin Class III-V 3-5/8”L 7300002 8200354 Packaged Hitch Pins Part# Ref # Finish Size Description 7350209-01 TTRP120 Zinc 1/2" 105° Bent Receiver Pin with Retaining Clip 7350315-01 TTRP583 Zinc 5/8" 105° Bent Receiver Pin with Retaining Clip 7350315-01 WWW.TEXTRAIL.COM 7350209-01 J-8 2010 Copyright by TexTrail, Inc. HARDWARE & LOCKS 7350314 HARDWARE & LOCKS H A R D WA R E & LO C K S Part# 6750144 6750141 6750148 6750143 6750142 6750140 6750120 6750145 6750139 Ref # 66045 66050 66063 66066 66070 66053 25201 66056 66060 Part# 7300034 7300036 7300022 7300023 7300037 7300029 7300035 7300030 Ref # 66003 66000 66007 66008 66006 66010 66015 66017 Part# 8200289 Part# 5553 Snapper Pins Description Square 3/16" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" x 3-3/4" Snapper Pin Square 5/16" x 2-25/32" Snapper Pin Round 5/16" x 2-3/4" Snapper Pin with Chain Square 3/8" x 1-5/8" Snapper Pin Square 3/8" x 2-1/2" Snapper Pin Linch Pins Description 3/16" x 1-3/8" Yellow Zinc Linch Pin 1/4" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 3" Yellow Zinc Linch Pin with Chain 3/8" x 2-11/32" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin 7/16" x 2" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin with 10" Lanyard Butterfly Latch Description 1/4” x 1-1/2” Steel Butterfly Strap with Grips 8200034 8200033 A 1-13/16" 2" 2-3/4" 3-1/4" 3-3/4" 2-3/4" 2-3/4" 1-5/8" 2-1/2" B 1-5/8" 1-13/16" 2-1/2" 3" 3-5/8" 2-7/16" 2-1/2" 1-1/2" 2-5/16" C 1-9/16" 1-1/2" 2-1/2" 1-1/2" 1-1/2" 1-3/4" 2" 1-1/2" 2-5/16" Length 30” 8200099 8200330 Spring & Tipper Latches Part# 8200034 8200033 8200099 Part# 8200111 Width 1” Part# 8200008 Ref # 5240 2598 2575 Description Paddle Handle Tipper Latch Assembly Zinc 5/8" Spring Loaded Center Pop-Up Latch Assembly 1/2” Spring Loaded Latch Assembly Zinc 1-1/2” x 3” Load Plate 6-1/2” Overall Length x 1-9/16” Wide “Suitcase” Latch Ref# Description 207 Catch/Pull Down Latch Kit - Zinc Length Catch Width 3-13/16” 1/2” Toggle Action “Suitcase” Latch Ref# Description 801 Catch/Pull Down Toggle Action Latch Zinc - No Striker / Catch WWW.TEXTRAIL.COM J-9 8200008 8200111 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Torx® Screwdriver Bit and Holder Size Description Screw Bit Holder for Torx® Driver 1/4" Drive 1/4" Torx® Hex Screw Bit for 3/16" Drive 1/4" Torx® Hex Screw Bit for 1/4" Drive 5/16" Torx® Hex Screw Bit for 1/4" Drive Torx® Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx® Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx® Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx® Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx® Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx® Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx® Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx® Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx® Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zinc—virtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool Part# 9420055 9420053 7030163 9420054 Ref # T14 T25 T30 T40 9420055 Torx® Bit HARDWARE & LOCKS 9420052 Stake Pocket Part# Ref # Width Depth Height Gauge Description 9250097 STK02 3-1/2" 1-1/2" 3" 4 Stake Pocket 9250096 STK01 3-1/2" 1-1/2" 3" 8 Stake Pocket WWW.TEXTRAIL.COM J-10 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Ref # 2589 2588 2591 2585 Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196 7030197 Ref # 18JDB 532JDB 1164JDB 316JDB 1364JDB 732JDB 14JDB 38JDB 532NDB 316NDB 38NDB 18SDB 964SDB 532SDB 1164SDB 316SDB 1364SDB 732SDB Part# 7500237 7500009 7040009 Ref # 100578 100579 200096 Stake Components Description 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 4-Piece Rack Straight Connector Set Drill Bits Type Diam. Length Jobber 1/8" 2-3/4" Jobber 5/32" 3-1/8" Jobber 11/64" 3-1/4" Jobber 3/16" 3-1/2" Jobber 13/64" 3-5/8" Jobber 7/32" 3-3/4" Jobber 1/4" 4" Jobber 3/8" 5" Nitro 5/32" 2-1/16" Nitro 3/16" 2-3/16" Nitro 3/8" 3-1/8" Stubby 1/8" 1-7/8" Stubby 9/64" 1-15/16" Stubby 5/32" 2-3/16" Stubby 11/64" 2-1/8" Stubby 3/16" 2-3/16" Stubby 13/64 2-1/4" Stubby 7/32" 2-3/8" A 2" 3" 3" B 96" 96" 96" HARDWARE & LOCKS Part# 8200003 8200004 8200005 8200105 Ref # RB78 RB11 RB212 RB112 Part# 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007 Ref # CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316 Description Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Pre-Drilled Rubber Bumpers C D E* F* Bolt Size 2" 11-1/2" 5/8" 8 3/8" 4" 11" 1-1/8" 8 9/16" 4" 11" 1-1/8" 9 9/16" *E = Hole Size F = Number of Holes 7500162 Part# 7500162 7500047 7500041 7500040 Twist 1-5/8" 2" 2-1/8" 2-5/16" 2-7/16" 2-1/2" 2-3/4" 3-5/8" 1" 1-1/8" 1-13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 7500047 Rubber Bumpers Diam. Height Hole Description 7/8" 1/2" 3/16" Rubber Bumper with Washer 1" 1" 1/8" Rubber Bumper with Washer 2-1/2" 1" 3/8" Rubber Bumper 1-1/2" 3/4" 1/4" Rubber Bumper with Washer Cap Plug Description Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16" WWW.TEXTRAIL.COM J-11 8200003 8200004 8200005 Description Rubber "D" Bumper Rubber "D" Bumper Rumber® Grooved Surface "D" Bumper 7500041 7500040 8530002 5350253 8530003 8530005 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S Packaged Locks Part# 8200356 8200357 Ref # 2848DAT 1481DAT 8200352 Description 1/2”-5/8” Receiver Lock Set Includes 8200354 & 8200362 5/8” Lock Set Stainless Steel Includes 8200352 & 8200362 8200357 8200350 8200356 8200353 8200231 8200354 8200351 Receiver Hitch Locks Part# 7350109 Ref # 1472DAT T3 1479DAT 2866DAT TBB4 1480DAT 1469DAT TR200 T3B T3U T3R Ref # 4843 Description Receiver Lock 1/2” Chrome 2-5/8”L for Class II 5/8" Steel Triple Plated Chrome Receiver Deadbolt Lock 5/8" Chrome Receiver Lock 2-3/4”L for Class III/IVChrome 1/2” or 5/8” Receiver Lock Chrome Bent Pin Class III-V 3-5/8”L 5/8" x 4-3/8" Locking Hitch Pin Barbell Heads 5/8" x 2-3/4”L Receiver Lock Stainless Steel 5/8" x 3/1/4" Pin Stainless Steel Receiver Lock 5/8" Chrome Receiver Deadbolt Lock 5/8" Black Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Blue Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Red Epoxy Powder Coated Receiver Deadbolt Lock HARDWARE & LOCKS Part# 8200353 8200221 8200351 8200354 8200103 8200352 8200350 8200197 8200216 8200217 8200218 Wireless Back-Up / Hitch Assist Camera Monitor Power Camera Power Description Auxiliary/Lighter 4-Way Flat 3-1/2" Color Monitor with Magnetic Base & Camera ! Wireless WWW.TEXTRAIL.COM J-12 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S 8200141 8200047 8200058-02 Padlocks Part# 8200096 Ref # TL-45 8200058-02 40KA 8200208 TRP170 8200181 THPXL 8200184 THPXLKA 8200047 37D 8200141 3DAT 8200211 TLM4100 8200209 TPC125 8200210 TPC225 8200043 BL50 8200228 TLM87 HARDWARE & LOCKS 8200043 Part# 8200047 8200365 8200367 8200179 8200043 8200361 8200361 8200363 8200364 8200366 8200059 8200362 8200360 Description Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter - Keyed Alike Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable - Keyed Alike Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide Laminated Steel Masterlock Padlock 1-9/16" Wide 4-Pack Keyed Alike 40MM 1" X 1/4" Diameter Shackle Padlocks Brass Combination Resettable 2" Body 1-1/4" x 5/16" Diameter Shackle Padlock Set Brass Combination Resettable 2" Body 2-1/4" x 5/16" Diameter Shackle Padlock Set Deluxe Door Latch Lock Flat Keys 5/8" Span & Covered Key Slot solid Brass Solid Steel Laminated 1-3/16" Body 7/8" x 3/16" Diameter Dual Locking Shackle Padlock Coupler Latch Locks 8200047 Ref # 37D RC4 1471DAT SXTC2 F22 1475DAT 1475DAT RC2 RC3 RC5 1471DAT 2847DAT 2878DAT 8200059 8200367 8200360 Description Laminated Steel Masterlock Shielded Coupler Latch Lock 1-9/16" Wide Chrome Plated Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Chrome Plated Steel 3-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Brass 5/8" Span Coupler Latch Lock Chrome Plated Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Black Finished Coupler Latch Lock 1/2" Span with Covered Key Slot Black Finished Coupler Latch Lock 2" Span with Covered Key Slot Black Finished Coupler Latch Lock 2-3/8" Span with Covered Key Slot Chrome Plated Steel 3-3/8" Span Coupler Latch Lock 9/32" Pin with Covered Key Slot 9/16 - 2-3/4” Stainless Steel Coupler Latch Lock Multi Key Slot 7/8 Coupler Latch Lock with 3 keys WWW.TEXTRAIL.COM J-13 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S 8200158 8200090 Position #1 8200140 8200090 Position #2 8200053 8200113 8200090 Position #3 8200368 Coupler Locks Part# Ref # Description 8200158 DT-25013 Coupler Lock for 1-7/8” to 2-5/16” w/ keys - locks both sides 8200113 379DAT Universal Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers 8200102 377DAT Universal Coupler Lock fits 1-7/8" & 2" Couplers. Chrome. 8200053 TL-20* Aluminum Coupler Lock fits Bulldog 1-7/8", 2" & 2-5/16" Couplers. Aluminum Coupler Lock fits 2" & 2-5/16" 2K thru 10K Trigger Style Couplers 8200090 TL-33* Aluminum Coupler Lock fits 2" 5K Latch Style Couplers Aluminum Coupler Lock fits 2" & 2-5/16" 8K thru 10K Large Couplers * Excludes Padlock and Keys HARDWARE & LOCKS WWW.TEXTRAIL.COM J-14 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S LOCKS CONTINUED 8200141 8200096 8200047 8200185 HARDWARE & LOCKS Trailer Door Locks Part# Ref # Description 8200047 37D Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide 8200185 DL80 Lockrod Cam & Keeper Lock for Trailer Door with Butterfly / Cam Latch 8200141 3DAT Laminated Steel Masterlock Padlock 1-9/16" Wide 8200215 8025 Hockey Puck Internal Shackle Hasp 2-Piece Chrome 8200096 D70 Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter Keyed Alike See Master Lock products in advertisement in front of Catalog WWW.TEXTRAIL.COM J-15 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S LOCKS KS SC CONTINUED ONTINUED 8200168 2001 20 01 8200051 2000 20 00 8200096 0009 0096 8200070 8200 82 8 0007 000 00 070 0 0 Pintle Coupler Lock King Pin Coupler Lock 8200069 8200057 GOOSENECK COUPLER LOCKS Part# Ref # WWW.TEXTRAIL.COM J-16 2010 Copyright by TexTrail, Inc. HARDWARE & LOCKS Description Gooseneck 2-5/16" Coupler Lock - Aluminum 3/4" Heavy Duty Steel 8200051 TL-50* Locking Pin. Recommend to use with 8200168. Gooseneck Lock fits Round and Square Tubes. Secures Adjustable 8200168 TL-51* Top of Coupler. Use with 8200051. 8200096 TL-45 Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter Deluxe Gooseneck Combo Lock Kit. Includes 8200051, 8200168 & 8200070 TL-53 8200096. Pintle Coupler Lock 2-1/2" to 3" Eye - Aluminum 3/4" Heavy Duty 8200057 TL-60* Steel Locking Pin. King Pin Coupler Lock - Aluminium 3/4" Heavy Duty Steel Locking 8200069 TL-70* Pin. * Excludes Padlock & Keys H A R D WA R E & LO C K S LOCKS CONTINUED 8200023 8200248 8200165 Wheel Locks Ref # Description TCL75 Wheel Lock RA25 Wheel Lock RA25K Wheel Lock Keyed Alike EZ300 Wheel Lock Up To 15" TK100 Wheel Lock Up To 15" Part# 8200248 8200023 8200024 8200165 8200076 8200076 Spare Tire Locks Ref # 262DAT F-562 ST30 HARDWARE & LOCKS Part# 8200171 8200224 8200232 Description Spare Tire Lock Lug Nut Style - Chrome Plated Spare Tire Lock Lug Nut Style - Chrome Plated for Side Mounted Spares Spare Tire Cable Lock 36" x 12MM (7/16") 8200224 8200171 Chain Part# 8850061 8850063 8850064 8850065 8850066 8850067 8850068 Ref # C316P C14P C516P C38P C1423 C1426 C1419 Description 3/16" Galvanized Proof Chain 3.2K 1/4" Galvanized Proof Chain 5.2K 5/16" Galvanized Proof Chain 7.6K 3/8" Galvanized Proof Chain 10.6K 5/16" Shot Blast High Test Chain 3/8" Shot Blast High Test Chain 1/4" Zinc High Test Chain WWW.TEXTRAIL.COM J-17 High Test Chain Galvanized Proof Chain 2010 Copyright by TexTrail, Inc. H A R D WA R E & LO C K S CHAINS CONTINUED Safety Chain Ref # Size Length Capacity Grade Description S-Hooks with Safety Latch on 8850026 6800031P 3/16" 48" 2K 30 Each End Zinc S-Hooks with Safety Latch on 8850030 6800032P 1/4" 48" 5K 30 Each End Zinc S-Hooks with Safety Latch on 8850031 6800033P 1/4" 60" 5K 30 Each End Zinc 7/16" Hook with Safety Latch 8850029 6840215P 1/4" 30" 5.2K 30 Zinc 1/4" Clevis Slip Hood with Safety 8850080 6800028P 1/4" 36" 12.6K 70 Latch 1/4" Clevis Slip Hook with Safety 8850024 6800025P 1/4" 28" 12.6K 70 Latch 3/8" Clevis Slip Hook with Safety 8850025 6800026P 3/8" 36" 26.4K 70 Latch 8850101 8605734 3/8" 36" 16.2K 8850028 8610004P 1/2" 40" 48K WWW.TEXTRAIL.COM J-18 Clevis Hook with Safety Latch 80 Clevis Sling Hook with Safety Latch 2010 Copyright by TexTrail, Inc. HARDWARE & LOCKS Part# AC T UAT I N G S YS T E M S Table Of Contents - Actuating Systems ABS Trailer Kit K-14 Actuating Couplers K-6 Batteries & Chargers K-2 Brake Control & Actuator Replacement Parts K-8 Brake Control & Actuators K-6 ACTUATING SYSTEMS Brake Controllers K-3 thru K-5 Breakaway Kits K-2 Breakaway Switch & Pin K-2 Chargers & Batteries K-2 Electro/Hydraulic Actuators K-9 Hydraulic Line Kit (Flexible) K-12 Hydraulic Line Kit (Tandem Dual) K-13 Hydraulic Line Kit K-10 Truck Control Kit K-14 Vacuum / Hydraulic Brake System K-14 Vacuum Pump Kit K-14 WWW.TEXTRAIL.COM K-1 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S BREAK AWAY KITS Breakaway kits are designed to apply the trailers electric brakes in the event that the trailer becomes disconnected from the hitch while in motion and hold for 15 minutes. TexTrail offers kits that vary depending on mounting options and the number of axles on the trailer. All kits meet or exceed D.O.T regulations and include a 5 amp sealed rechargeable battery. Break Away Kits Part # Ref # 6550020 6550036 6550021 6550037 6550028 6550038 86113 50-85312 86171 50-85-303 34-285 5085314 Description Charger Included Switch Included LED # of Axles Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No Yes Yes No 1-2 1-3 1-2 1-3 1-4 Breakaway Kit - clamshell box Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 9amp battery Post Mount Bracket for 6550037 6550028 9 amp 6550021 6550036 6550037 These complete systems incorporate the highest quality components in trailer breakaway systems. Meet or exceed Department of Transportation (DOT) specifications regarding trailer breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway systems will automatically apply consistent braking power to your trailer brakes for a minimum of 15 minutes when installed according to manufactures instructions. Break Away Switches & Replacement Pins Part # Ref # Description 6550019 20225 Breakaway Switch 6550039 80-01-2140 Breakaway Pin Zip CableD 6550010 2010 Breakaway Switch Tekonsha 6550011 2010A Replacement Pin/Cable 6550016 20012 Pin/Cable for 6550007 Switch 6550016 6550011 6550039 6550010 Chargers & Battery Ref # Description 20011 12 volt ABCD Charger 1024 12 volt ABCD Charger 2024 12 volt Continuous Charger 2023 Battery 12 volt 5 amp 6550003 6250007 6500027 Check your breakaway kit periodically to insure that wiring and connections are secure. A short or an open circuit can result in a no-brake condition. For optimal performance, IT IS RECOMMENDED THAT BREAKAWAY DEVICES BE REPLACED EVERY 3 - 5 YEARS. Chargers...Whats The Difference? ABCD Charger Accelerated Battery Charging Device - Minimal Charging Capacity for Partially depleted Battery - Not Effective for Batteries Under 7 Volts Remaining WWW.TEXTRAIL.COM Full Capacity or Integrated Charger V S K-2 - Temperature Compensated DC to DC - Maximum Charging Capacity Even if Battery Is Almost Depleted - Effective With Batteries Down To 1 Volt Remaining Charge 2010 Copyright by TexTrail, Inc. ACTUATING SYSTEMS Part # 6550003 6250007 6500027 6250009 6550020 AC T UAT I N G S YS T E M S TIME BASED BRAKE CONTROLLER Pod® for 1 and 2 Axle Trailers - Solid state electronics - Power-on LED for a positive tow vehicle-to-trailer connection - “Up- front” manual over-ride control - Rugged, easy mount chassis - Mounting hardware included - Smooth and simple installation • 5 year limited warranty Pilot® Pilott® ffor or 1 ttoo 3 AAxle xlle TTrailers raiilers - Large easy to read dual digital display shows: - Properly wired control - Voltage output to brakes (vs. a percentage) - Connection to trailer - Dark smoke lens ideal for direct light applications; performs better than red lens - Protection against short circuit/loss of ground - Can be mounted upside down and still have a readable display - Standard mounting bracket included with optional ball mount available - For use on any 12 volt negative ground system - Limited lifetime warranty ACTUATING SYSTEMS Synchronizer® for 1 to 4 Axle Trailers - New Quik-Connect feature - Provides automatic and manual braking - For use on all trailers with 2 or 4 electric brakes - Red L.E.D. indicator monitors controller performance and trailer wiring integrity - Operates stoplights on tow vehicle and trailer during automatic and manual operations for added safety and awareness - Manual operation is independent of power setting to allow full 12-volt output - Built-in automatic current limiter protection from trailer brake wiring shorts - Multiple mounting holes and bracket - For use on all 12-volt negative ground vehicles - Three Thre Th reee year y ar limited ye lim imitited ed warranty war arra rant ntyy POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction, and features “up-front-easyaccess” adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mountingg surfaces. Part# 6500001 Model 80500 Pilot has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. Pilot has flexible mounting options and can be installed in any direction. Our microprocessor allows you the ability to read the display even when mounted upside down. The Pilot’s digital display shows voltage output to the brakes. Part# 6500013 Model 80550 Part# 6500022 Pivot Bracket-Sold Separately The Synchronizer® is a brake controller for single and tandem axle trailers equipped with electric brakes. It modulates and controls current from the battery to the trailer brakes. The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reached. Part# 6500011 Model 81725 Discovery® for 1 to 4 Axle Trailers - Digital display provides detailed brake force information - Quick -plug connector easily connect to vehicle using a CURT quickplug harness. - Controls any trailer with 2 to 8 electric brakes - Fully adjustable power and ramp time - Manual control lever - Thumb wheel output control lever - Electronic activation ensures smooth stops - Provides automatic and manual trailer braking - Limited lifetime warranty WWW.TEXTRAIL.COM The Discovery® is a brake controller for single and tandem axle trailers equipped with electric brakes. It is compatible with anti-lock brakes and cruise control. It has a self diagnostic system that continually monitors connection and checks for shorts. Works with electric over hysraulic systems. K-3 Part# 6500064 Model 51120 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S INERTIA BRAKE CONTROLLER Part# 6500009 Model 81741B Energize III® for 1 and 2 Axle Trailers - Quik-Connect feature - Smooth, proportional trailer braking - For all single and tandem axle trailers equipped with electric brakes - Designed for use on any 12-volt negative ground vehicles - Full 12-volt output provided with manual lever activation - Superior responsiveness - Fully adjustable gain setting wheel - Compatible with all electronic systems (ABS, cruise, etc.) - Wide range of mounting positions; perfect for steep dash surface mounting - Easy adjustment and standard four-wire hookup - Trailer/Tow vehicle stoplights operate when trailer brakes are applied automatically or with manual lever - Red L.E.D. indicator displays braking intensity and warns of short circuit - Five year limited warranty Energize III® all electronic brake controller features a patented sensing device that automatically monitors and measures tow vehicle deceleration and applies the trailer brakes in direct proportion. It reacts instantly to any change in brake pedal pressure and ensures controlled, smooth stops. Trailer and tow vehicle stoplights operate automatically when the manual lever or trailer brakes are applied. app pplied. DX2 Electric Brake Controller Part# 6500012 Model 58-008-00 - Digital LED that displays voltage output & assists with leveling setup - Power window that provides a numeric visual indication of gain setting - Independent manual slide level that overrides the gain setting for full power - Manual slide override that provides braking power at which ever setting is greater - Short circuit protection y limited warrantyy - Seven year Inertia-activated electric brake controller. For use on single and tandem axle trailers. Includes DX2 electric brake controller, mounting hardware, instruction manual, and quick reference card. PROPORTIONAL BRAKE CONTROLLER Voyager® Electronic Brake Control, for 1 to 4 Axle Trailers Part# 6500017 Model 9030 Primus®IQ Electronic Brake Control, for 1 to 3 Axle Trailers - Utilizes “Plug-N-Play” port for 2-plug adapters - Self-diagnostics features will illuminate LED readout when issues occur - Includes a “Boost” feature - Works proportionally in reverse - Snap-in dash mounting clip and hardware included - Digital LED readout - Limited 15 Year warranty Part# 6500045 Model 90160 WWW.TEXTRAIL.COM K-4 The Voyager® incorporates Tekonsha’s patented braking sensor and is the best value you’ll find for smooth and secure trailer braking. It’s compact size and features, like a bicolored LED brake monitor (to assure a complete connection to trailer brakes and give an indication of relative braking power being applied) make the Voyager® extremely versatile. Voyager® minimizes interference with tow vehicle electrical systems, uses a four wire hook up, has a broad setting range and is compatible with most any vehicle. The Voyager® has all the extra power you’ll need for trailers with 6 or 8 brake sys systems. y tems. A totally proportional electric trailer brake control, the new Primus®IQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy®, the Primus®IQ now includes the “Boost” feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display. 2010 Copyright by TexTrail, Inc. ACTUATING SYSTEMS - True Proportional Braking Power: Inertia Activated Sensor - Two Control System: Controls power output to brakes and braking response - Manual Override: Aids in setting controls and allows manual application of brakes - LED Light Display indicates a completed electrical circuit and changes from green to red indicating relative braking power - Instals conveniently under vehicle dash - Five year limited warranty AC T UAT I N G S YS T E M S PROPORTIONAL BRAKE CONTROLLER CONTINUED Prodigy® Electronic Brake Control, for 1 to 4 Axle Trailers - Meets National Highway Traffic Safety Administration (NHTSA) regulations regarding tow vehicle/trailer light activation - Includes a 3 ft. pigtail connector for ease of connection when using a vehicle’s brake control wire harness - Digital LED readout - Limited lifetime warranty Part# 6500004 Model 90185 Prodigy® is the most intelligent brake control. This powerful control features new motion sensor technology similar to what is used in the aerospace industry. With Prodigy® no manual level adjustment is necessary, it adjusts itself to varying terrains as you drive. It is equipped with a sensor that detects the tow vehicle’s rate of deceleration, applies proportional braking to the trailer and features an exclusive “BoostSM” feature that gives users the ability to apply more initial trailer braking power (especially when towing heavier trailers). For backing into tough spots this is the only inertia control that works proportionally in reverse. A digital display depicts voltage delivery to the trailer during braking and displays continual diagnostics check for proper connection, shorted magnet condition, open ground and much more. A unique pocket mount allows for flexible mounting options (standard mounting bracket included). A quick and easy disconnect feature allows users to remove when supplied remo re move ve the the control con ontrtrol ol w henn no he nott in uuse se aand nd sstore tore to re iinn a su supp pplilied pp ed pprotective rote ro tect ctivivee po ppouch. uch. uc h. PP3® 3®® Electronic Ellectroniic Brake Brakke CControl, ontroll ffor or 1 to 4 AAxle le Trai Trailers ilers - Distinct, easy to see LCD display with multiple color and contrast options - User can customize to choose English, French or Spanish display - Allows the user to switch between Electric and Hydraulic brakes - Highly advanced, easy-to-understand, roadside diagnostics - Easy access, “Up-Front’ controls - The original “Boost” feature allows for different levels of customized braking - Compact, dash-hugging design - Unique, easy-to-use, clip-mounting systems - Quick disconnect for easy storage; convenient storage pouch included - Limited lifetime warranty Part# 6500052 Model 90195 There has never been a more advanced, yet user friendly, proportional system offered for trailer braking than the Tekonsha P3®. In addition to multiple color and contrast options, the LCD display features highly advanced, easy-to-understand roadside diagnostics. P3’s convenient features include a dash-hugging design, unique easy-to-use clip-mounting system, quick disconnect for safe storage when not in use and the original “Boost” feature that allows the driver to increase the initial power delivered to the trtraiaiaile trailer lerr brakes. le brak br akes ak es. es ACTUATING SYSTEMS Prodigy® RF Electric Trailer Mounted Brake Control, for 1-3 Axle Prodigy® RF Electronic Brake Control, for 1 to 3 Axle Trailers, Trailer Mounted, Proportional. Utilize for rental businesses, fleet ownerships or multiple - Remote Hand Held Unit tow vehicles. Requires no leveling. - No under dash wiring necessary – utilizes wireless communication - The original “Boost” feature allows for different levels of customized braking Part# 6500060 Model 90250 - System runs continual diagnostics and displays fault codes in unit’s display - Plugs into standard 12-volt power accessory adapter - Trailer Mount (Power Module) Unit - 5 year limited warranty - Utilizes standard sealed 8’ blade style 7-way connector - Multiple mounting positions on tongue or front of trailer - 15 year limited warranty on power module - 1 year limited warranty on cord Brake Control Harness Brake Control Harness (Continued) Packaged Bulk Part # Ref # Year Make Description 6500049-01 TTBCG49 05-09 Ford 6500039-01 TTBCH39 99-06 GM 7000003 56070 Chevy/GMC/Ford 7000004 56071 Dodge 7000004 Part # Ref # Year Make Brake Control Harness 6500041 47745 97-11 Dodge/Chrysler/Jeep Brake Control Harness 6500049 47725 05-09 Ford Brake Control Harness 7’ Hitch Adapter Harness 6500040 47705 94-11 Ford/Mercury/Landrover/Lincoln Brake Control Harness 7’ Hitch Adapter Harness 6500061 3036 09-11 Ford F-150 Brake Control Harness 6500051 3034 08-11 Ford Econoline/F-250 thru F-550 Brake Control Harness 6500062 3026 09-11 GM-Chevy/Buick/GMC Brake Control Harness 6500062 3026 07-11 GM-Saturn Only Brake Control Harness 7000003 WWW.TEXTRAIL.COM Description Brake Control Harness 7000089 3015 03-07 GM Brake Control Harness 6500039 47775 99-07 GM Brake Control Harness 7000332 47635 04-11 Nissan/Infiniti Brake Control Harness 6500053 3040 03-11 Toyota/Lexus Brake Control Harness K-5 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S DICO / TITAN Model 60 Item # Ref # Solenoid Tongue Ball Size Installed Size Type Finish Capacity Tongue Weight 9050055 4332900 No 2" 3" Drum - Weld /Bolt-On Zinc 6,000 600 9050056 4175420 Yes 2" 3" Disc - Weld / Bolt-On Zinc 6,000 600 Finish Capacity Tongue Weight DICO / TITAN Model 6 Item # Ref # Solenoid Tongue Ball Size Installed Size Type 9050050 4079220 Yes 2-5/16" 3" Drum - Weld /Bolt-On Zinc 7,500 600 9050052 4747220 Yes 2-5/16" 3" Disc - Weld / Bolt-On Zinc 7,500 600 Type Finish Capacity Tongue Weight Disc - Weld /Bolt-On Zinc 8,000 800 Type Finish Capacity Tongue Weight Drum - Weld /Bolt-On Zinc 12,500 1,250 Type Finish Capacity Tongue Weight Drum - Weld Painted 12,500 1,250 Type Finish Capacity Tongue Weight DEMCO Model DA91 (with “Auto-Lock” Coupler) Item # Ref # 9050083 8750311 Tongue Solenoid Ball Size Size Installed Yes* 2-5/16" 3" *Recirculating / Bypass solenoid DICO / TITAN Model 10 Item # Ref # 9050071 4750800 Solenoid Tongue Ball Size Installed Size No 2-5/16" 3" DEMCO Model DA10 Item # Ref # No - 3" DICO / TITAN Model 10 Item # Ref # Solenoid Tongue Ball Size Installed Size 9050085 2478100 No 2-5/16" 3" Drum - Weld /Bolt-On Zinc 12,500 1,250 9050070 4750600 No 2-5/16" 3" Disc - Weld / Bolt-On Zinc 12,500 1,250 WWW.TEXTRAIL.COM K-6 2010 Copyright by TexTrail, Inc. ACTUATING SYSTEMS 9050084 8101222 Solenoid Tongue Ball Size Installed Size AC T UAT I N G S YS T E M S DEMCO Model DA20 Item # Ref # Solenoid Tongue Ball Size Installed Size Type Finish Capacity Tongue Weight 9050087 8202802 No 2-5/16" 3" Drum - Weld /Bolt-On Painted 20,000 2,000 9050088 8203602 Yes 2-5/16" 3" Disc - Weld / Bolt-On Painted 20,000 2,000 Type Finish Capacity Tongue Weight DICO / TITAN Model 20 Item # Ref # Solenoid Tongue Ball Size Installed Size 9050074 4042700 No 2-5/16" 3" Drum - Weld /Bolt-On Zinc 20,000 2,000 9050067 4750400 No 2-5/16" 3" Disc - Weld / Bolt-On Zinc 20,000 2,000 Type Finish Capacity Tongue Weight Drum - Weld Zinc 20,000 2,000 Type Finish Capacity Tongue Weight DEMCO Model DA20 Item # Ref # 8204011 Solenoid Tongue Ball Size Installed Size No 2-5/16" 3" DEMCO Model DA91 Item # Ref # ACTUATING SYSTEMS 9050090 8759522 Solenoid Tongue Ball Size Installed Size No - A-Frame Drum - Weld Painted 8,000 800 Yes - A-Frame Disc - Weld Painted 8,000 800 Type Finish Capacity Tongue Weight A-Frame Weld Painted 7,000 700 2-5/16" A-Frame Weld Painted 7,000 700 Solenoid Tongue Ball Size Installed Size Item # Ref # 9050044 16100 No 9050011 16039 No Item # Ref # 2" Description 6450624 4748800 Back-up solenoid valve (normally open); inlet 1/8" NPTM and outlet 3/16" F.I.F. WWW.TEXTRAIL.COM K-7 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S Replacement Parts 16500 1844-2 16014 Ref # Description 9050030 10614 Toledo Actuator Replacement Master Cylinder Kit 9050022 16500 Toledo Actuator Replacement Cap for Master Cylinder 9050041 1844-2 Toledo Actuator – Replacement Shock Absorber Item # Ref # Description 9050031 5650 Demco Actuator Replacement Master Cylinder All Drum Models 9050091 5672 Demco Actuator Replacement Master Cylinder All Disc DA66, DA91 & DA10 7950007 3876 Demco Actuator Replacement Cap for Master Cylinder 9050092 5692 Demco Actuator Replacement Shock for DA66 9050019 12426 Demco Actuator Replacement Shock. Fits DA91, DA10 & DA20 Item # Ref # Description 9050021 23362 Titan Actuator Replacement Shock Model 60 9050093 44807 Titan Actuator Replacement Filler Cap Model 60 9050094 43951 Titan Actuator Replacement Master Cylinder - Drum Model 60 9050062 48200 Titan Actuator Replacement Master Cylinder - Disc Model 60 9050019 12426 Titan Actuator Replacement Shock Model 6 9050095 17556 Titan Actuator Replacement Filler Cap Model 6 9050096 10271 Titan Actuator Replacement Master Cylinder - Drum Model 6 9050061 47470 Titan Actuator Replacement Master Cylinder - Disc Model 6 9050019 12426 Titan Actuator Replacement Shock Model 10 9050095 12503 Titan Actuator Replacement Filler Cap Model 10 9050032 23744 Titan Actuator Replacement Master Cylinder - Drum Model 10 9050063 47471 Titan Actuator Replacement Master Cylinder - Disc Model 10 9050065 7784 Titan Actuator Replacement Shock Model 20 9050097 12503 Titan Actuator Replacement Filler Cap Model 20 9050032 23744 Titan Actuator Replacement Master Cylinder - Drum Model 20 N/A 47470 Titan Actuator Replacement Master Cylinder - Disc Model 20 9050075 40454 Titan Actuator Replacement Multi Fit Coupler Repair Kit Model 6 and 60 9050082 43584 Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 6 9050098 18487 Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 20 WWW.TEXTRAIL.COM K-8 2010 Copyright by TexTrail, Inc. ACTUATING SYSTEMS Item # AC T UAT I N G S YS T E M S Electro/Hydraulic Brake Actuator Electro/Hydraulic brake actuator provides pressure for 1-3 axles. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed housing provides a weather tight seal. Two year limited warranty. Item # Ref # Description 7010004 K71-650 Dexter Drum Brake Actuator 1000psi 7010005 K71-651 Dexter Disc Brake Actuator 1600psi *Requires use of breakaway kit 6550028 See Page K-2 Electro/Hydraulic Brake Actuator Item # Ref # Description 7010001 HBA-10 Carlisle Hydrastar Drum Brake Actuator 1000psi 7010002 HBA-16 Carlisle Hydrastar Disc Brake Actuator 1600psi 7010006 HBA-BC Carlisle Hydrastar Actuator Replacement Cap ACTUATING SYSTEMS Actuating System Parts Item # 9500018 9050128 9500063 9500066 Ref # 18018MF 18018SF 302X3 100X3 Description Hydraulic Brake Hose 3/8-24 Male/Female 18” long Hydraulic Brake Hose Torsion 90 ° Male: 3/8-24 (90 ° ) Female: 3/8-24 18”Long Hydraulic Fitting Union Line 3/16” for 3/16” OD Steel Line Brass Hydraulic Fitting Tube Nut 3/16” OD Line Nut inverted Flare 9500063 9500018 WWW.TEXTRAIL.COM 9050128 K-9 9500066 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S Hydraulic Line Kits Hydraulic Line Kits come complete with all fittings needed to connect hydraulic brake axles. Kits begin with a basic single line kit and with the additional “add-on” kit you can plumb more brakes. Choose from Steel (with Alum Galfan Finish), Stainless Steel, Torsion or DOT approved “Flex” line kits. The standard hydraulic brake line kits listed below are designed to be used on trailers using either surge brake actuators or power brake actuators and are manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527. Item # 9500038 9500040 Item # Ref # Description AG-100SA Line Kit - Single Axle DRUM 3/16" x 15' S-100SA Ref # Line Kit - Single Axle DRUM Stainless Stl 3/16" x 15' Ref # QTY Description 1 1 ea 3/16" x 15' Brake Line 2 1 ea 3/16" x 72" Brake Line 3 1 ea 3/16" x 17.5" Brake Line 4 1 ea 18" Flex Brake Line ML/FML 5 1 ea Hose Bracket 6 3 ea Hose Clip 7 3 ea 3/16" IF Union Tee w/ Brkt 8 3 ea Tube Clamp 9 3 ea Self Tab Screw 10 3 ea Axle Strap 11 1 ea 1/8 MPT x 3/16 IF Adapter Description 9500039 AG-130SA Line Kit - Add-On for AG-100SA 9500041 S-130SA Line Kit - Add-On for Stainless Stl S-100SA * USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE QTY Desc 1 1 ea 3/16" x 30' Brake Line 2 1 ea 3/16" x 72" Brake Line 3 1 ea 3/16" x 17.5" Brake Line 4 1 ea 18" Flex Brake Line ML/FML 5 1 ea Hose Bracket 6 1 ea Hose Clip 7 1 ea 3/16" IF Union Tee w/ Brkt 8 1 ea 3/16" IF Adapter Tee 9 1 ea Tube Clamp 10 1 ea Self Tab Screw 11 3 ea Axle Strap WWW.TEXTRAIL.COM ACTUATING SYSTEMS Ref # K-10 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S Item # Ref # 9500042 AG-300-TR 9500044 AG-701-TR ACTUATING SYSTEMS Ref # QTY Ref # QTY Desc Line Kit - Single Axle Torflex (DISC) 3/16" x 15' 1 1 ea 3/16” x 15’ Brake Line Line Kit - Single Axle Torflex (DISC) Deluxe 3/16" x 15' 2 1 ea 3/16” x 72” Brake Line 3 2 ea 3/16” x 5” Brake Line 4 1 ea 3/16” IF Street Tee 5 2 ea 13” Flex Brake Line ML/FML 6 2 ea Hose Brkt 7 2 ea Hose Clip 8 4 ea Tube Clamp 9 4 ea Self Tab Screw 10 1 ea 1/8 MPT x 3/16 IF Adapter Description Description Item # Ref # AG-600-AK Line Kit - Add-On for AG-300-TR AG-700-AK Line Kit - Add-On for AG-701-TR 1 1 ea 3/16" x 72' Brake Line 9500043 2 1 ea 3/16" x 30" Brake Line 9500045 3 2 ea 3/16" x 5" Brake Line 4 2 ea 13" Flex Brake Line ML/FML 5 2 ea Hose Brkt 6 2 ea Hose Clip 7 2 ea 3/16" IF Street Tee 8 2 ea Tube Clamp 9 2 ea Self Tab Screw WWW.TEXTRAIL.COM Description * USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE K-11 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S FLEXIBLE Hydraulic Line Kits Designed to be used on trailers with either surge brake actuators or powered brake actuators, such as the electric over hydraulic. Can be used with drum or disc brakes. Brake lines are DOT flexible hoses approved for use on all trailers. All fittings are brass for ultimate corrosion resistance. Do not exceed 3,000 psi. Item # Ref # 9500046 F-100-SA Description Line Kit - Single Axle "DOT Flex Line" Ref # QTY Desc 1 1 ea 72' FLEX Brake Line 2 1 ea 48" FLEX Brake Line 3 1 ea 18" FLEX Brake Line 7 1 ea 3/16" IF Union Tee w/ Brkt 8 1 ea 3/16" IF Adapter Tee 9 3 ea Tube Clamp 10 3 ea Self-Tap Screw 11 3 ea Tie Strap Item # Ref # Description Ref # QTY Description 1 1 ea 72' FLEX Brake Line 9500047 2 1 ea 48" FLEX Brake Line * USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE 3 1 ea 18" FLEX Brake Line 7 1 ea 3/16" IF Union Tee w/ Brkt 8 3 ea Tube Clamp 9 3 ea Self-Tap Screw 10 3 ea Tie Strap 11 1 ea 1/8 MPT x 3/16 IF Adapter ACTUATING SYSTEMS WWW.TEXTRAIL.COM F-130-SA Line Kit - Add-On for F-100-SA K-12 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S Tandem Dual Hydraulic Line Kits Designed to be used on longer trailers. Includes 25 feet of main line verses 15 feet in the standard kit. Disc kit includes hoses designed to be used with disc brake calipers with 7/16-20 male ends avoiding the use of additional fittings. Item # Ref # 9500015 T-1002 Description Line Kit - Tandem Dual For Drum Ref # QTY Description 1 1 ea 3/16" x 25' Brake Line 2 3 ea 3/16" x 51" Brake Line 3 2 ea 3/16" x 60" Brake Line 4 2 ea 18" Flex Brake Line ML/ FML 5 2 ea Hose Brkt 6 2 ea Hose Clip 7 2 ea 3/16" IF Union Tee w/ Brkt 8 1 ea 3/16" IF Street Tee 9 8 ea Tube Clamp 10 8 ea Self-Tap Screw Ref # Item # Ref # Description 1 1 ea 3/16" x 25' Brake Line Line Kit - Tandem Dual w/ Deluxe Hoses 2 1 ea 3/16" x 51" Brake Line 3 2 ea 3/16" x 60" Brake Line 4 4 ea 18" x 7/16-20 Flex Line ML/FML 5 4 ea Hose Brkt 6 4 ea Hose Clip 7 3 ea 3/16" IF Street Tee 8 8 ea Tube Clamp 9 8 ea Self-Tap Screw ACTUATING SYSTEMS 9500014 T-1002D QTY Description WWW.TEXTRAIL.COM K-13 2010 Copyright by TexTrail, Inc. AC T UAT I N G S YS T E M S ABS TRAILER KITS Meritor WABCO has been a trailer ABS technology leader since 1993 with ABS offered as standard equipment at all major trailer OEM’s. Enhanced Easy-Stop™ ABS provides unparalleled trailer monitoring and control capabilities to fleet and owner-operators with system configurations to meet virtually any trailer application – basic, standard, and premium. These kits provide increased directional stability while meeting FMVSS-121 requirements for ABS air brake systems and offer the benefits of reduced tire flat spotting and trailer swing. Part # Ref # Description 6050017-02 2S/1M Tandem Axle ABS kit - One Axle ABS 6050018-02 4S/2M Tandem Axle ABS kit - Two Axles ABS 6050008 Air Tubing - 3/8" Blue sold per foot 6050009 Air Tubing - 3/8" Red sold per foot TRUCK CONTROL KITS The TK Series of vacuum / hydraulic truck control kits are designed to provide trailer braking actuation by synchronizing the trailer brakes to the truck brake system. Part # Ref # Description REPLACEMENT PARTS 9500052 TK-3000 Up to 1 ton w/ 30' Vac. Hose Part # Ref # Description 9500053 TK-3050 Up to 1 ton w/ 50' Vac. Hose 9500056 SV-2950 Truck Sync Valve 9500054 TK-3100 Over 1 ton w/ 30' Vac. Hose 9500057 SV-2951 Truck Sync Valve (2-ton pre 1986) 9500055 TK-3150 Over 1 ton w/ 50' Vac. Hose 9500058 RV-9200 Relay Valve 9500051 TK-4050 Air / Hydraulic Truck Booster Kit TRUCK CONTROL KITS Ref # 9500003 VP-2100 Vacuum Pump Kit - Complete 9500049 VP-2101 Vacuum Pump Controller Kit 9500050 40011 ACTUATING SYSTEMS Part # Description Replacement Vac Pump - Electric Then UNIVERSAL ELECTRIC vacuum pump kit provides a vacuum source for the diesel and EFI engine trucks with vacuum / hydraulic brake trailer. This is a direct drive 12V pump that requires NO pulleys or belts. WWW.TEXTRAIL.COM K-14 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LIGHTS & ELECTRICAL Table Of Contents - Lights & Electrical Adapters Back-Up Lights Bracket for Electrical Connectors Brackets for Lighting Bulbs Cable Ties Certificate / Permit Holder Clearance & Side Marker Lights Connectors Conspicuity Tape Decorative Brackets Electrical Accessories Flashing & Revolving Lights Fleet Count Grommets Identification Light Bars Incandescent Lighting Interior & Dome Lights LED Light Kits LED Lighting LED Micro-Flex™ Lighting Lenses for All Lighting License Lights Light Plugs, Pigtails & Lead Wires Micro-Flex™ LED Lighting Mounting Accessories Quick Splices Reflective Tape Reflectors Specialty Lighting Stop / Turn / Tail Lights Terminal Connectors Terminal Pliers Tractor, Halogen & Tow Lights Trailer Connectors Turn Signal Lights Utility Lights Wire & Cable Wiring Harnesses WWW.TEXTRAIL.COM L-1 L-28 L-20 L-30 L-23 thru L-24 L-35 L-31 L-26 L-2, L-7 & L-13 L-28 L-38 L-24 thru L-25 L-28 thru L-34 L-22 L-2 L-25 thru L-26 L-2, L-9 & L-17 L-13 L-22 L-13 L-2 & L-7 L-2 L-38 L-13 & L-20 L-26 L-2 L-23 thru L-24 L-30 L-38 L-38 L-22 L-2, L-10 & L-18 L-30 thru L-31 L-31 L-22 L-28 L-11 & L-19 L-12 & L-22 L-35 thruL-37 L-28 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL 8100651 8100644 8100594 8100645 8100593 8100646 8100628 8100627 LED Lighting Part# 8100594 8100593 8100628 8100644 8100645 8100646 8100625 8100626 8100641 8100640 8100627 8100651 8100648 8100535 Ref # Diode Type AL-90AB 1 Mini AL-90RB 1 Mini MCL-83RB 1 Mini MCL-61AB 2 Thinline MCL-61RB 2 Thinline MCL-61ARB 2 Thinline MCL-56AB 1 2" Round MCL-56RB 1 2" Round MCL-527AB 2 2-1/2" Round MCL-527RB 2 2-1/2" Round STL-12RB 6 6" Oval STL-73RB 6 6" Oval STL-13RB 7 4" Round 8100603 8100638 8100639 8100602 Hole Size Clearance / Marker Clearance / Marker Identification Light Bar Clearance / Marker Clearance / Marker Fender Light Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Tail & Turn Stop, Tail & Turn Stop, Tail & Turn Description Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber & Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light 8100557 8100608 8100609 8100534 8100563 WWW.TEXTRAIL.COM Hole Size Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal L-2 8100641 8100640 8100600 8100636 8100601 8100637 8100650 8100604 8100605 Description Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Surface Mount Sealed Amber LED Light Micro-Flex™ Surface Mount Sealed Red LED Light Micro-Flex™ Surface Mount Sealed Amber LED Light Micro-Flex™ Surface Mount Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Kit Micro-Flex™ Sealed Red LED Light Kit Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Flush Mount Amber LED Light Micro-Flex™ Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Kit Micro-Flex™ Sealed Flush Mount Amber LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Straight Kit Micro-Flex™ Sealed Flush Mount Red LED Light Right Kit Micro-Flex™ Sealed Flush Mount Amber LED Light 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Part# Ref # Diode Type 8100535 MCL-50AB 9 2" Round 8100603 MCL-50RB 8 2" Round 8100638 MCL-502AB 3 2" Round 8100639 MCL-502RB 3 2" Round 8100602 MCL-51AB 3 2-1/2" Round 8100488 MCL-51RB 3 2-1/2" Round 8100600 MCL-17AB 3 4-3/16" Oblong 8100601 MCL-17RB 3 4-3/16" Oblong 8100636 MCL-19AB 4 5-3/4" Oblong 8100637 MCL-19RB 4 5-3/4" Oblong 8100604 MCL-63AB 4 Thinline 8100605 MCL-63RB 4 Thinline 8100615 MCL-63AK 4 Thinline 8100616 MCL-63RK 4 Thinline 8100608 AL-191AB 3 Mini Thinline 8100609 AL-191RB 3 Mini Thinline 8100534 STL-35AB 16 Rectangular 8100563 STL-35RB 16 Rectangular 8100557 STL-22RB 12 6" Oval 8100654 STL-22RK 12 6" Oval 8100649 STL-22AB 16 6" Oval 8100610 STL-23RB 12 4" Round 8100611 STL-23RK 12 4" Round 8100612 STL-23RK 12 4" Round 8100650 STL-23AB 16 4" Round 8100626 8100610 8100649 8100488 8100625 LIGHTS & ELECTRICAL IMPORTANT NOTE: Every lamp, reflex reflector, and conspicuity treatment (device) must be permanently attached in the location specified below and must comply with all applicable requirements prescribed for it by FMVSS/CMVSS 108. The face of any device on the front/rear and sides should be, respectively perpendicular and parallel to vehicle center line, unless it is photometrically certified at installation angle. No part of the vehicle shall prevent any device from meeting its prescribed requirements unless an auxiliary device meeting all prescribed requirements is installed. In Canada: Manufacturers and importers of vehicles must have the proper certification test records demonstrating compliance of lighting components with all prescribed requirements. BASIC EQUIPMENT REQUIRED FOR ALL TRAILERS TRAILER WIDTH UNDER 80” DESCRIPTION AREA MANDATORY REQUIREMENTS EQUIPMENT (SAE LENS CODING) FUNCTIONAL PURPOSE MIN QNTY COLOR LOCATION HEIGHT mm (in.) FROM GROUND Tail Lamps (T) Indicates vehicle’s presence and width 2 Red On the rear - symmetrical-as far apart as practicable 380-1830 (15-72) Stop Lamps (S) Indicate braking 2 Red On the rear - symmetrical-as far apart as practicable 380-1830 (15-72) Rear Turn Signal Lamps (I) Indicate direction of turn 2 Red or Yellow On the rear - symmetrical-as far apart as practicable 380-2110 (15-83) Rear Reflex Reflectors (A) Indicate vehicles presence and width 2 Red On the rear - symmetrical-as far apart as practicable facing rearward 380-1530 (15-60) License Plate Lamps (L) Illuminates license plate 1 White On the rear - above or at the sides of license plate No requirement Front and rear side marker lamps / side reflectors indicate vehicle’s presence and length 2 Red Each side at rear - as far back as practicable 380-1530 (15-60) no max. 2 Red Each side at rear - as far back as practicable 380-1530 (15-60) 2 Yellow Each side at front - as far forward as practicable 380 (15) min. 2 Yellow Each side at front - as far forward as practicable - facing sideward 380-1530 (15-60) 1 2 Rear Side Marker Lamps 3 LIGHTS & ELECTRICAL Rear Side Reflex Reflectors 4a Front Side Marker Lamps 4b Front Side Reflex Reflectors (P2,PC* OR P3, PC2) *photometrically certified at installation angle (A) (P2,PC* OR P3, PC2) *photometrically certified at installation angle Front and rear side marker lamps / side reflectors indicate vehicle’s presence and length (A) ADDITIONAL EQUIPMENT FOR TRAILERS EXCEEDING THE FOLLOWING PARAMETERS LENGTH 9.1M (30FT) OR LONGER DESCRIPTION MANDATORY REQUIREMENTS AREA EQUIPMENT (SAE LENS CODING) FUNCTIONAL PURPOSE MIN QNTY COLOR LOCATION HEIGHT mm (in.) FROM GROUND 5a Intermediate Side Marker Lamps (P2 or P3) Indicate presence of a long vehicle 2 Yellow Each side near center - facing sideward 380(15) minimum 5b Intermediate Side Reflex Reflectors (A) Indicate presence of a long vehicle 2 Yellow Each side near center - facing sideward 380-1530 (15-60) WWW.TEXTRAIL.COM L-3 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL WIDTH 80” (2.032m) or WIDER DESCRIPTION AREA EQUIPMENT 6 Rear Clearance Lamps MANDATORY REQUIREMENTS (SAE LENS CODING) FUNCTIONAL PURPOSE MIN QNTY COLOR LOCATION HEIGHT mm (in.) FROM GROUND (P2,PC* OR P3, PC2) *photometri- Show vehicle’s width - MAY NOT be combined with tail lights 2 Red At widest point-symmetrical-on the rear or near the rear facing rearward As high as practicablemay be lower only if ID lamps are at the top cally certified at installation angle 7 Rear Identification Lamps 8 Front Clearance Lamps (P2 or P3) (P2,PC* OR P3, PC2) *photometrically certified at installation angle Indicate presence of a wide vehicle 3 (Exact) Red On the rear-center facing rearward-horizontally spaced 150mm (6in) to 300mm (12in) apart In Canada: at the top - may be lower if door header narrower than 25mm. In USA: as high as practicable Show vehicle’s width 2 Yellow At widest point-symmetrical - as far forward as practicable - facing forward As high as practicable WIDTH 2.032M (80IN) OR WIDER AND GVWR 4536kg (10,000LB) OR MORE DESCRIPTION FUNCTIONAL PURPOSE COLOR LOCATION HEIGHT mm (in.) FROM GROUND Rear Upper Body Marking Exactly 2 pairs of 300mm long strips White On the rear upper corner-facing rearward At the top Bumper Bar Marking Continuous Red & White On the rear bumper bar’s horizontal No requirement AREA EQUIPMENT 9 10 (SAE LENS CODING) MANDATORY REQUIREMENTS OPTIONS Reflectors may not be required if they are replaced, in their required location. OPTIONAL IN CANADA DOT-C, DOTC2, DOT-C3, or DOT-C4 11 Rear Lower Marking Continuous Red & White see options On the rear - full width of the vehicle - facing rearward As horizontal as practicable and as close as practicable to the range of 375 to 1525mm from the ground 12 Side Marking See location Red & White see options Each side - facing As horizontal as practicable to the range of 375 to 18525mm from the ground Rear lower body and side conspicuity treatment may also be solid white, solid yellow, or white & yellow See diagrams on page L-5 & L-6 WWW.TEXTRAIL.COM L-4 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL NOTE: This information is provided as guidance only. TexTrail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada). LIGHTS & ELECTRICAL LIGHTS & ELECTRICAL NOTE: This information is provided as guidance only. TexTrail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada). See chart on page L-3 WWW.TEXTRAIL.COM L-5 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL NOTE: This information is provided as guidance only. TexTrail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada). LIGHTS & ELECTRICAL See chart on page L-4 WWW.TEXTRAIL.COM L-6 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS Part # Ref # 6-DIODE / 0.058A / 12.8V LIGHTS Description 8100359 MCL-36AB Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Amber 8100484 MCL-36RB Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Red 6-DIODE / 0.087A / 12.8V LIGHTS 8100485 8100486 MCL-45AB Bulls eye LED Marker / Clearance Light. Snap-on replaceable lens. Includes a single wire design that grounds through mounting hardware on 3” centers to a white base. Color: Amber MCL-45RB Bulls eye LED Marker / Clearance Light. Snap-on replaceable lens. Includes a single wire design that grounds through mounting hardware on 3” centers to a white base. Color: Red 15-DIODE / 0.109A / 12.8V LIGHTS 8100494 CBL-22AB Sealed LED Triangular Cab Light. Includes lead and ground wires. Color: Amber 2-DIODE / 0.46A / 12.8V LIGHTS 8100278 MCL-13A2B Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Amber 8100277 MCL-13R2B Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Red 8100510 MCL-CA2B Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Clear with Amber Diodes 8100511 MCL-13CR2B Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Clear with Red Diodes 8100512 UCL-13C2PG Mini Sealed LED Utility Light. Includes lead and ground wires. Color: Clear with Clear Diodes LIGHTS & ELECTRICAL 8-DIODE / 0.61A / 12.8V LIGHTS 8100427 MCL-21AB 2” Beehive Sealed LED Marker/Clearance or Rear Tracking Light. Requires 2-prong plug. Color: Amber 8100487 MCL-21RB 2” Beehive Sealed LED Marker/Clearance or Rear Tracking Light. Requires 2-prong plug. Color: Red 6-DIODE / 0.054A / 12.8V LIGHTS 8100375 MCL-31AB Oval LED Marker/Clearance Light with Reflective Lens. Includes lead and ground wires, and white mounting base. Color: Amber 8100376 MCL-31RB Oval LED Marker/Clearance Light with Reflective Lens. Includes lead and ground wires, and white mounting base. Color: Red WWW.TEXTRAIL.COM L-7 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # Ref # Description MCL-55AB 2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.97A / 12.8V Color: Amber MCL-55RB 2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red MCL-57AB 2-1/2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.96A / 12.8V Color: Amber 8100513 MCL-57RB 2-1/2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red 8100454 MCL-65ARB Thin Line Sealed LED Fender Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V. 8100473 MCL-67ARB Thin Line Sealed LED Fender Light. Includes mounting bracket and plug. 6-diode 0.048A / 12.8V. Part # Ref # 8100011 MCL-75AB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Amber 8100013 MCL-75RB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Red 8100452 MCL-65AB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber 8100453 MCL-65RB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red 8100377 81000378 8100514 Description Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CAB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Amber Diodes 8100005 Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CRB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Red Diodes 8100474 MCL-67AB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber 8100472 MCL-67RB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red WWW.TEXTRAIL.COM L-8 LIGHTS & ELECTRICAL 8100004 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # Ref # Description 8100530 MCL-82AB Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Amber 8100529 MCL-82RB Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Red 8100460 AL-91AB Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Amber 8100461 AL-91RB Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Red Part # Ref # 8100524 MCL-91AB Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12” single lead wire. 3-diode 0.051A / 12.8V Color: Amber 8100392 MCL-91RB Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12” single lead wire. 3-diode 0.051A / 12.8V Color: Red 8100431 MCL-96AB Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Amber 8100362 MCL-96RB Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Red Description LIGHTS & ELECTRICAL LED - LIGHT BARS Part # Ref # Description 8100371 STL-76RB Thin Line Dual Lens Sealed LED Stop / Turn / Tail Light with replaceable red snap-on lens. Clear polycarbonate inner lens is sonic welded to housing. Requires ground wire. 11-diode 0.275/0.022A / 12.8V Color: Red 8100490 MCL-78RB Thin Line LED Identification Light Bar for over 80” applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Red 8100491 MCL-88RGB Thin Line LED Identification Light Bar for over 80” applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Clear with Red Diodes 8100490 8100491 WWW.TEXTRAIL.COM L-9 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - LIGHT BARS (Continued) Part # Ref # Description 8100363 MCL-93RB Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a black molded housing for over 80” applications. Includes ground wire and 50” lead wire. 9-diode 0.051A / 12.8V Color: Red 8100489 MCL-84RB Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a polished, stainless steel housing for over 80” applications. Includes ground wire and 50” lead wire. 9-diode 0.051A / 12.8V Color: Red 8100363 8100489 8100428 MCL-97RB Sealed LED Identification Light Bar with three (3) sealed LED marker/clearance lights on a stainless steel housing for over 80” applications. Single wire design grounds through mounting hardware. 9-diode 0.058A / 12.8V Color: Red LED - STOP / TURN & TAIL LIGHTS Part # Ref # TRAILERS OVER 80” Description 8100365 STL-2RB Universal stud-mounted stop/turn/tail LED light for over 80” applications. 7-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex. Includes screw-on replaceable lens with gasket. Mounts on 2” centers and grounds through mounting studs. 18-diode 0.268/0.059A / 12.8V Color: Red 8100366 STL-3RB Same as 8100365 plus 8th function is a license illuminator. 23-diode 0.268/0.114A / 12.8V Color: Red Description 8100368 STL-8RB Universal stud-mounted stop/turn/tail LED light for under 80” applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2” centers and includes grounds wire. 16-diode 0.259/0.062A / 12.8V Color: Red 8100369 STL-9RB Same as 8100368 plus 7th function is a license illuminator. 21-diode 0.254/0.112A / 12.8V Color: Red WWW.TEXTRAIL.COM L-10 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Part # Ref # TRAILERS UNDER 80” LIGHTS & ELECTRICAL LED - STOP / TURN & TAIL LIGHTS (Continued) Part # Ref # TRAILERS OVER 80” Description 8100517 STL-16RB Waterproof universal mount 3-wire LED stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens and separate ground wire. 18-diode 0.279/0.070A / 12.8V Color: Red 8100518 STL-17RB Same as 8100517 plus 8th function is a license illuminator. 22-diode 0.279/0.121A / 12.8V Color: Red 8100519 STL-33RB Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red 8100522 STL-34RB Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red Part # Ref # Description 8100482 STL-72AB 6” Oval Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.275/0.042A / 12.8V Color: Amber+ 8100367 STL-72RB 6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.243/0.046A / 12.8V Color: Red LIGHTS & ELECTRICAL 8100482 8100367 8100526 STL-78AB 6” Oval Sealed LED Parking/Rear Turn Signal Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.275/0.042A / 12.8V Color: Amber 8100372 STL-78RB 6” Oval Sealed LED Stop/Turn/Tail Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.243/0.046A / 12.8V Color: Red 8100526 WWW.TEXTRAIL.COM 8100372 L-11 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - STOP / TURN & TAIL LIGHTS (Continued) Part # 8100483 8100496 8100276 8100370 8100329 8100271 Ref # Description STL-42AB 4” Round Sealed LED Parking/Rear Turn Signal Light for flange mount application. Requires industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber STL-42RB 4” Round Sealed LED Stop/Turn/Tail Light for flange mount application. Requires industry standard 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red STL-43AB 4” Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber STL-43RB 4” Round Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red STL-43AKB 4” Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber STL-43RKB 4” Round Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red LED - LICENSE, BACK-UP & UTILITY LIGHTS Part # 8100374 8100020 Description BUL-72CB 6” Oval Sealed LED Clear Utility Light for flush mount application. Requires industry standard 2-prong plug and mounting grommet. Not certified for backup light function. 10-diode 0.080A / 12.8V BUL-72CB 6” Oval Sealed LED Clear Utility Light for flange mount application. Includes 3-wires for installation. Does not require panel cutout. Not certified for backup light function. 10-diode 0.080A / 12.8V BUL-43CB 4” Round Sealed LED Clear Utility Light for flush mount application. Requires industry standard 2-prong plug and mounting grommet. Not certified for backup light function. 10-diode 0.080A / 12.8V WWW.TEXTRAIL.COM L-12 LIGHTS & ELECTRICAL 8100373 Ref # 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LED - LICENSE, BACK-UP & UTILITY LIGHTS (Continued) Part # Ref # Description 8100364 LPL-31CB Mini LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 2-diode 0.027A / 12.8V 8100495 LPL-41CB Armored LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 5-diode 0.054A / 12.8V LED - LIGHT & PIGTAIL Part # Ref # Description LED Kit includes one (1) 6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application, the industry standard 3-prong straight plug, and a mounting grommet. 8100367-2 STL-74RBK Pictured in lit and unlit mode for demonstration purposes. 10-diode 0.243/0.046A / 12.8V Call for pricing. LIGHTS & ELECTRICAL LED Kit includes one (1) 6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application, the industry standard 3-prong straight plug, and a mounting grommet. 8100367-3 STL-74RKB Pictured in lit and unlit mode for demonstration purposes. 10-diode 0.243/0.046A / 12.8V Call for pricing. INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS Part # Ref # 8100139 MC-11AB 8100138 MC-11RB Description Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Amber Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Red WWW.TEXTRAIL.COM L-13 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # 8100443 8100444 8100092 Ref # MC-36AB MC-36RB MC-35AB Color Description Amber Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Amber Red Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Red Amber Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Amber 8100094 MC-35RB Red Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Red 8100379 MC-37AB Amber Square Marker/Clearance Light with Reflective Lens and Side Reflex. Single wire design grounds through mounting stud. Color: Amber Amber Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3” centers. Red Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3” centers. 8100497 8100498 8100499 8100437 8100436 MC-38RB MC-42AB MC-42RB MCL-44AB MCL-44RB Amber Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3” centers. Color: Amber Red Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3” centers. Color: Red Amber 4” Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3” centers. Color: Amber Red 4” Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3” centers. Color: Red WWW.TEXTRAIL.COM L-14 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL 8100500 MC-38AB LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # Ref # Color 8100432 MC-66AB Amber 4” Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Amber 8100433 MC-66RB Red 4” Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Red Amber 3-1/2” Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Amber 3-1/2” Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Red LIGHTS & ELECTRICAL 8100292 MC-68AB Description 8100293 MC-68RB Red 8100290 MC-52AB Amber 2” Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug. 8100291 MC-52RB Red 2” Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug. 8100380 MC-53AB Amber 2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 8100381 MC-53RB Red 2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 8100501 MC-55AB Amber 2-1/2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 8100502 MC-55RB Red 2-1/2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 8100458 MC-57AB Amber 2-1/2” Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug. 8100459 MC-57RB Red 2-1/2” Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug. WWW.TEXTRAIL.COM L-15 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # Ref # Color 8100102 MC-58AB Amber 8100103 MC-58RB Red Description 2-1/2” Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Amber 2-1/2” Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Red Sealed Dual-Bulb Rectangular Fender Light that functions as an amber front clearance light and a red rear clearance light for over 80” applications. Mounts on 3” centers. Requires mounting bracket and plug. Color: Amber/Red 8100157 MC-65ARB Amber/Red 8100175 MC-65AB Amber Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Amber 8100174 MC-65RB Red Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Red 8100038 154KA Amber Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Amber 8100039 154KR Red Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Red 8100228 8100229 BA-65ARLB BA-65ARRB Red/Amber Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80” applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Right side assembly. WWW.TEXTRAIL.COM L-16 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Amber/Red Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80” applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Left side assembly. LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # Ref # Description 8100104 A-91AB Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber 8100105 A-91RB Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red 8100391 MC-92AB Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber 8100448 MC-92RB Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red 8100098 MC-81AB Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Amber 8100099 MC-81RB Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Red 8100081 J-550-A Sealed Steel Armored Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Amber 81000153 J-550-R Sealed Steel Armored Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Red LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - LIGHT BARS Part # Ref # Description 8100294 MC-93RB Sealed Identification Light Bar with three (3) replaceable Mini Thin Line Sealed Marker/Clearance Lights (8100105) on a black molded housing for over 80” applications. Includes ground wire and 50” lead wire. Color: Red 8100396 MC-77RB Identification Light Bar with three (3) replaceable, snap-on Thin Line Oblong Marker/ Clearance Lights (8100293) on a white metal housing for over 80” applications. Includes ground wire and 50” lead wire. Color: Red WWW.TEXTRAIL.COM L-17 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - LIGHT BARS (Continued) Part # Ref # Description 8100135 MC-99AB Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50” lead wire. Color: Amber 8100134 MC-99RB Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50” lead wire. Color: Red INCANDESCENT LIGHTING - STOP / TURN & TAIL LIGHTS Part # Ref # TRAILERS OVER 80” Description 8100389 ST-2RB Universal stud-mounted stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex. Includes screw-on replaceable lens with gasket. Mounts on 2” centers and grounds through mounting studs. Color: Red 8100390 ST-3RB Same as 8100389 plus 8th function is a license illuminator. Color: Red 8100170 ST-4RB Same as 8100389 plus submersible. 8100191 ST-5RB Same as 8100390 plus submersible. Part # Ref # TRAILERS UNDER 80” Description ST-8RB 8100478 ST-9RB Same as 8100477 plus 7th function is a license illuminator. Color: Red TRAILERS OVER 80” 8100196 ST-16RB Waterproof universal mount 3-wire stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens and separate ground wire. Color: Red 8100195 ST-17RB Same as 8100196 plus 8th function is a license illuminator. Color: Red WWW.TEXTRAIL.COM L-18 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL 8100477 Universal stud-mounted stop/turn/tail light for under 80” applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2” centers and includes grounds wire. Color: Red LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - STOP / TURN & TAIL LIGHTS (Continued) Part # 8100525 8100533 LIGHTS & ELECTRICAL 8100402 Ref# Color ST-33AB ST-33RB ST-34RB Description Amber Rectangular Sealed Parking / Rear Turn Signal for flush mount application. Requires mounting grommet and 3-prong plug. Color: Amber Red Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. Color: Red Red Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. Color: Red 8100520 ST-24RB Red 4-3/8” Round stud-mounted, black polymer housed light. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes snap-on replaceable lens. Mounts on 2” centers and grounds through two 1/4” studs. 8100509 ST-25RB Red Same as 8100520 plus 7th function is a license illuminator. Part # Ref # Description 8100546 ST-60RB Universal stud-mounted stop/turn/tail light for surface mount application. Functions: stop, turn, tail, back-up and license light. Grounds through mounting studs. Includes screw-on replaceable lens. Mounts on three 1/4” studs. Color: Red 8100108 ST-60RB Same as 8100418 except Clam Packaged. Color: Red 8100187 ST-40RB 4.5” Round flush mount stop/turn/tail light with acrylic lens, durable black steel housing and snap-in lens ring. Includes 2 wire leads and grounds through mounting hardware. Color: Red 8100314 A-40SRB Snap Ring for mounting 4” round lights. Snap-in bracket. 8100080 ST-44AB 4” Sealed round flush mount parking and rear turn Signal light. Includes mounting grommet and industry standard 3-prong plug. Color: Red 8100521 ST-44RB 4” Sealed round flush mount stop/turn/tail light. Includes mounting grommet and industry standard 3-prong plug. Color: Red 8100165 ST-45RB 4” Sealed round flush mount stop/turn/tail light. Requires mounting grommet and industry standard 3-prong plug. Color: Red 8100471 ST-46RB 4” Sealed round flush mount stop/turn/tail light with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Red WWW.TEXTRAIL.COM L-19 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL INCANDESCENT - STOP / TURN & TAIL LIGHTS (Continued) Part # Ref # Description 8100145 ST-51RS Part # Ref # 8100386 ST-70RB 6” Sealed Oval stop/turn/tail light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. Color: Red 8100445 ST-74RB 6” Sealed Oval stop/turn/tail light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Red 8100176 ST-74AB 6” Sealed Oval parking / rear turning Signal light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Amber Pedestal mount 3-function stop/turn/tail light. Includes snap-on, replaceable lens on single face plastic housing. Grounds through mounting post. Color: Red Description INCANDESCENT - TURN LIGHTS Part # Ref # Description 8100183 ST-75AB 6” Sealed Oval mid-ship turn Signal and side marker with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Amber 8100182 ST-77AB 6” Sealed Oval mid-ship turn Signal and side marker with reflex lens. Includes mounting grommet and industry standard 3-prong plug. Color: Amber INCANDESCENT - LICENSE, BACK-UP & UTILITY LIGHTS Part # Ref # Description LP-11CB 8100090 LP-21CB Chrome Plated Armored Steel License Plate Light with replaceable bulb. Mounts on 2” centers. Single wire design grounds through mounting hardware. 8100385 LP-31CB Chrome Plated License Plate Light with replaceable bulb. Mounting ears for surface mounting on 2” centers. Includes a water resistance gasket, and lead and ground wires. 8100506 LP-51CB License Plate Light with gray poly coated housing and replaceable bulb. Mounting ears for surface mount on 3-1/4” centers. Includes weather-tight gasket seal and a single wire design that grounds through mounting hardware. Hardware separate. 8100132 LP-52CB Same as 8100506 plus with a black steel license plate bracket. WWW.TEXTRAIL.COM L-20 LIGHTS & ELECTRICAL 8100185 Chrome Plated Snap-in License Plate / Utility / Dash Light with replaceable bulb. Mounts in 1-1/4” diameter hole. Single wire design grounds through mounting hardware. Two units required for legal license illumination. 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL INCANDESCENT - LICENSE, BACK-UP & UTILITY LIGHTS Part # Ref # Description 8100527 BU-33CB Sealed Flush Mount Rectangular Back-Up Light. Requires industry standard 2-prong plug and mounting grommet. 8100255 BU-45CB Sealed 4” Round Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet. 8100256 BU-44CB Sealed 4” Round Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet. 8100465 BU-70CB Sealed 6” Oval Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet. 8100136 BU-74CB Sealed 6” Oval Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet. INCANDESCENT - LIGHT KITS LIGHTS & ELECTRICAL Part # Ref # Description 8100118 TL-27BK Light Kit includes (1) 8100477 universal stud-mounted red stop/turn/tail 6-function light, (1) 8100478 universal studmounted red stop/turn/tail 7-function light, (2) 8100443 square amber marker/clearance lights with reflective lenses, a rust proof angled license plate bracket and a 20’ wiring harness. 8100118-01 TL-270 Same as 8100118 in 8100119 TL-28RK Same as 8100118 in clam package. 8100120 TL-29BK Same as 8100118 except with a 25’ wiring harness. 8100592 TL-9RK Same as 8100120 in clam package. TL-21RK Towing Light Kit includes (2) Magnetic mount round red stop/turn/tail lights and 25-feet of wiring harness with a 4-flat plug. 8100197 WWW.TEXTRAIL.COM Packaging L-21 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL SPECIALITY LIGHTING - DOME LIGHTS Part # Ref # Color Description 8100116 IL-21CB Clear Rectangular Weatherproof Interior / Exterior Surface Mount Dome Light with a replaceable, snap-on polycarbonate lens. Mounts on 3.5” centers. Includes ground and lead wires and an on/off switch. 8100226 IL-61CB Clear Round Surface Mount Interior Dome Light with On-Off Switch. Aluminum base with translucent lens. Single wire design grounds through mounting base. 8100253 RV-PL1C Clear Rectangular Surface Mount Utility / Porch Light. White housing with separate ground wire. Includes a replaceable, snap-on lens. 8100037 RV-PL3C Clear Rectangular Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens. 8100257 RV-PL7C Clear Oval Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens. SPECIALITY LIGHTING - TRACTOR, HALOGEN & TOW LIGHTS Part # Ref # Description 8100198 TL-35FS Clear 3” x 5” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. 8100260 TL-35TB Clear 3” x 5” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package. 8100251 TL-46FB Clear 4” x 6” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. 8100652 TL-46TS Clear 4” x 6” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package. TL-10CB Clear 8100012 RB-10A Amber Amber Rotary Beacon / Warning Light. Includes 12-Volt plug with coil cord. WWW.TEXTRAIL.COM L-22 LIGHTS & ELECTRICAL 8100281 5” Round Utility / Tractor Flood Beam Heavy-duty Light. Shock proof rubber housing with sealed beam bulb. 6” lead and ground wires. Adjustable plated steel bracket. Universal 5/16” mounting post. 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - LIGHT BRACKETS Part # Ref # Finish Description 8100148 1049R Raw Steel Light Protector Right Hand. For Stop/Turn/Tail 8100149 1052L Raw Steel Light Protector Left Hand with license light cutout. For Stop/Turn/Tail Light. 5350210 8128L Raw Steel Light Protector Left Hand. For Stop/Turn/Tail Light. Cut-out for 2” Side Marker. 5350211 8128R Raw Steel Light Protector Right Hand. For Stop/Turn/Tail Light. Cut-out for 2” Side Marker. 5350082 8147 Raw Steel Weld-On Light Plus License Plate Bracket. For Standard Stop/Turn/Tail Light. Bracket is 5-3/4” tall x 14 Gauge x 7-3/4” long inverted “L”. Elongated slot for stud mount lights. Two holes for standard dimension license plate and bolts. 5350371 8101 Raw Steel Z-Style Light Bracket. For Big Tex Dump Trailers. 5350392 1131 Raw Steel 5” Clearance / Marker Light Bracket. 5350085 8122 Raw Steel Light Bracket. 12 GA. For stud mount clearance / marker light. 5350077 8217 Raw Steel Weld-On Oval Light Bracket. 4” tall x 8-1/2” long. 8100143 BK-70BB Black Black Power Coated Steel Oval Light Bracket. For 6” oval lights. Requires grommet part number 8100387 for installation. Color: Black 8100142 BK-45BB Black Black Power Coated Steel Round Light Bracket. For 4” round lights. Requires grommet part number 8100430 for installation. Color: Black WWW.TEXTRAIL.COM L-23 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - LIGHT BRACKETS Part # Ref # Color 8100231 LP-5SB Black Description Rust Proof Straight Polymer License Plate Bracket. For use with stud mount license lights. 8100384 LP-15SB 8100019 Zinc Zinc Plated Heavy Duty Steel License Plate Bracket. For use with stud mount license lights. Gray Molded all weather plastic adapter allows 2-1/2” sealed lights to be surface mounted. Requires grommet part number 8100249 for installation. 8100314 A-40SRB Gray Snap Ring for mounting 4” round lights. Snap-in bracket. 8100015 A-65PB Black Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. 8100014 A-66PB Gray Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. 8100285 A-67CB Chrome Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. 8100031 A-65PBPG Black Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, 180 male molded connector and molded lead wire. 8100463 A-91BB Black Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal. 8100018 A-91CB Chrome Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal. Chrome Molded all weather black plastic surface mount light bracket. Intended for two wire molded plug part numbers 8100383 (straight) or 8100404 (right angle). Includes gasket for weather-tight seal. 8100017 A-91OB Part # Ref # Color Description 8100107 A-45CGB Chrome Chrome Cover Ring for 4” Grommets Mount Lights. Includes two screws for installation. 8100106 A-42FCB Chrome Chrome Cover Ring Flange for 4” Round Flange Mount Lights. Includes three screws for installation. WWW.TEXTRAIL.COM L-24 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - DECORATIVE LIGHT BRACKETS LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - DECORATIVE LIGHT BRACKETS Part # Ref # Color Description 8100030 A-13C2B Chrome Snap-on Chrome Ring for enhancing appearance of Mini Sealed LED Marker/ Clearance Lights. Features polished, chromeplated finish. 8100451 A-78CB Chrome Snap-on Chrome Ring for enhancing appearance of 6” Oval Sealed LED Lights. 8100091 BK-42CB Chrome Chrome Bracket for Oblong Marker / Clearance Lights. Polished, chrome-plated finished steel guard for added protection of lights. LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - GROMMETS Part # Ref # Description 8100382 A-54GB 2” Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 2-5/16” mounting hole required. 8100049 A-54GK 2” Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-5/16” mounting hole required. 8100457 A-55GB 2-1/2” Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 3” mounting hole required. 8100204 A-55GK 2-1/2” Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 3” mounting hole required. 8100249 A-57GK 2-1/2” Open Back Recessed Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-25/32” mounting hole required. Part # Ref # 8100048 J-573-GM Black PVC Grommet allows lights to be flush mounted. Provides shock mount to lengthen lamp life. Requires industry standard 2-prong plug (8100383 or 8100404) for electrical connection. 8100280 A-13G2B Gasket provides weather tight seal for lights. 8100523 A-33GB Black PVC Grommet allows flush mounting of the ST/STL-33 & 34 Stop, Tail & Turn lights. Provides shock mount to lengthen bulb life. Description WWW.TEXTRAIL.COM L-25 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - GROMMETS (Continued) Part # Ref # Description 8100387 A-70GB Black PVC Grommet for 6” Oval Lights to be flush mounted. Provides shock mount to lengthen bulb life. 8100430 A-45GB Black PVC Grommet for 4” Round Lights to be flush mounted in 4-1/2” cut-out. Provides shock mount to lengthen bulb life. MOUNTING ACCESSORIES - PERMIT / CERTIFICATE HOLDER Part # 84000525 Ref # 46 Description Round Certificate / Permit Holder. Keeps permits or license clean and dry in any weather. Cam-on translucent cover has gasket seal. High impact plastic. Tension spring holds documents in place with cover removed. PLUGS, PIGTAILS & LEAD WIRES Part # Ref # Description A-91LW Single Wire Plug with 12” lead. 8100383 A-46PB Two-Prong Straight Molded Plug with 6” leads for sealed clearance/marker lights. Includes #10 ring terminal on ground wire; hot wire is bare. 8100404 A-49PB Two-Prong Right Angle Molded Plug with 6” leads for sealed clearance/ marker lights. Includes #10 ring terminal on ground wire; hot wire is bare. 8100403 A-45CB Two-Prong Straight Molded Plug with 6” leads for single contact sealed lights. Ideal for use with back-up lights. Includes #10 ring terminal on ground wire; hot wire is bare. 8100388 A-45PB Three-Prong Straight Molded Plug with 6” leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare. 8100532 A-47PB Three-Prong Right Angle Molded Plug with 6” leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare. WWW.TEXTRAIL.COM L-26 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL 8100001 LIGHTS & ELECTRICAL ELECTRICAL - ADAPTER, PLUGS & SOCKETS WIRING GUIDE GREEN Right Turn & Brake WIRING IDENTIFICATION BY COLOR: YELLOW BROWN WHITE RED BLUE PURPLE Left Turn & Brake Electric Brakes Back-Up Lights Tail/Marker Lights Ground Auxiliary Power Tow Vehicle Side Trailer Side LIGHTS & ELECTRICAL Tow Vehicle Side Ground WHITE Tail/Marker Light Tail/Marker Light BROWN Left Turn & Brake Left Turn & Brake YELLOW WHITE Ground BROWN YELLOW GREEN Trailer Side Right Turn & Brake Right Turn & Brake GREEN 4-FLAT CONNECTOR WIRING COLOR GAUGE FUNCTION WHITE 16 Ground BROWN 16 Tail/Marker Light YELLOW 16 Left Turn & Brake GREEN 16 Right Turn & Brake WWW.TEXTRAIL.COM NOTE: ILLUSTRATIONS REPRESENT A REAR VIEW OF CONNECTORS. NOTE: IDENTIFY THE WIRES ON YOUR VEHICLE AND TRAILER BY FUNCTION ONLY. COLOR IS NOT STANDARD AMONG ALL MANUFACTURERS. THIS DIAGRAM IS INTENDED AS GUIDANCE ONLY. L-27 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL - ROUND ELECTRICAL CONNECTORS Part# 7000080 7000081 7000326 7000324 7000304 7000303 9900078 7000344 7000347 9900086 7000348 7000345 7000084 7000087 7000088 7000156 7000175 7000174 9900137 9900076 7000349 9900055 7000350 7000013 7000351 Part# 7000360 9900064 7000355 9900071 7000356 7000353 7000359 Round Electrical Connectors Description 4-Pole Round Metal Plug - Trailer Side 4-Pole Round Metal Socket - Vehicle Side 5-Pole Round Metal Plug - Trailer Side 5-Pole Round Metal Socket - Vehicle Side 6-Pole Round Die-Cast Plug - Trailer Side 6-Pole Round Die-Cast Socket - Vehicle Side 6-Pole Round Molded Plug - Vehicle Side 36" Long 6-Pole Round Molded Plug - Trailer Side 48" Long 6-Pole Round Molded Plug - Vehicle Side 48" Long 6-Pole Round Molded Plug - Trailer Side 72" Long 6-Pole Round Molded Plug - Vehicle Side 84" Long 6-Pole Round Molded Plug - Trailer Side 96" Long 7-Blade RV Metal Plug - Trailer Side 7-Blade RV Plastic Plug - Trailer Side 7-Blade RV Plastic Socket - Vehicle Side 7-Pole Round Metal Plug with Spring - Trailer Side 7-Pole Round Metal Socket - Vehicle Side 7-Pole RV Round Zinc Socket - Vehicle Side 7-Blade RV Round Molded Plug - Trailer Side 36" Long 7-Blade RV Round Molded Plug - Trailer Side 48" Long 7-Blade RV Round Molded Plug - Vehicle Side 48" Long 7-Blade RV Round Molded Plug - Trailer Side 72" Long 7-Blade RV Round Molded Plug - Vehicle Side 84" Long 7-Blade RV Round Molded Plug - Trailer Side 96" Long 7-Blade RV Round Molded Plug - Trailer Side 108" Long Ref # 41836 48035 48115 41812 47115 47915 47905 48053 Flat Electrical Connectors Description 4-Flat Molded Plug - Trailer Side 48" Long 4-Flat Molded Socket - Vehicle Side 48" Long 4-Flat Molded Plug - Trailer Side 12" Long 4-Flat Molded Plug & Socket 12" Lead 4-Flat Molded Extension 48" 5-Flat Molded Plug - Trailer Side 12" Long 5-Flat Molded Socket - Vehicle Side 48" Long 5-Flat Molded Socket - Vehicle Side 60" Long Ref # A15WB A18WB A20WB A25WB A30WB A35WB A40WB Wiring Harness Description 4-Flat Molded Wishbone Harness 15' 4-Flat Molded Wishbone Harness 18' 4-Flat Molded Wishbone Harness 20' 4-Flat Molded Wishbone Harness 25' 4-Flat Molded Wishbone Harness 30' 4-Flat Molded Wishbone Harness 35' 4-Flat Molded Wishbone Harness 40' WWW.TEXTRAIL.COM L-28 7000080 7000081 7000326 7000324 7000304 7000303-02 7000304-02 7000303 7000084 7000088 7000087 7000156 7000175 7000174 7000344 9900137 9900076 9900078 9900077 9900090 7000330 7000309 7000310 7000077 9900064 9900071 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Part# 9900077 9900090 7000039 7000077 7000102 7000330 7000309 7000310 Ref # 11-402 11-404 48385 48365 48445 48435 20032 50-61-104 50-86-004 20034 50-86-007 50-61-108 701P 710P 710S 11-702 11-720 12-703 20042 20043 50-87-004 20044 50-87-007 20047 50-67-004 LIGHTS & ELECTRICAL ELECTRICAL ADAPTERS Part # Ref # Description 37565 Adapter, 7 to 6 & 4 Center pin auxiliary. Adapts a 7-RV blade to both a 6-round and a 4-wire flat. Universal - Center pin can be switched to auxiliary or electric brake. 7000045 37545 Adapter, 7 to 6 Center pin auxiliary. Adapts a 7-RV blade to 6-round. Universal - Center pin can be switched to electric brake. Includes dust cover. 7000041 37355 Adapter, 7-RV blade to 4 wire flat with dust cover. 7000046 18142 Adapter, 7-RV pin to 4 wire flat. 7000038 37305 Adapter, 6-round to 4 wire flat with dust cover. 7000043 47205 Adapter, 4 wire flat to 7-RV blade. 7000035 47185 Adapter, 4 wire flat to both a 4 wire flat and a 7 RV blade. Weatherproof. 7000037 47165 Adapter, 4 wire flat to 6-round pin connector. 7000051 7000051 7000045 7000046 7000041 7000038 7000043 7000035 7000037 7000048 7000049 MULTI-FIT TRAILER CONNECTORS Part # Ref # Description 7000048 40965 Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 6 round. Weatherproof. Fits the vehicles listed below: LIGHTS & ELECTRICAL 7000049 40955 Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 RV blade. Weatherproof. Fits •20002004 GM •1999-2004 Ford •2004 Nissan Armada & Titan Mounting bracket included with connector. Vehicle Year(s) Ford F-Series Trucks 1999-2011 Ford Expedition 1999-2011 Ford Excursion 2000-2005 Ford Explorer 2002-2011 Ford Explorer Sport Trac 2007-2010 Ford Flex 2009-2010 Ford E-Series Vans 2004-2010 Lincoln Aviator 2003-2006 Lincoln Navigator 1999-2011 Lincoln Mark LT 2006-2008 Mercury Mountaineer 2002-2010 Nissan Armada 2004-2010 Nissan Titan 2004-2011 Infiniti QX-56 2004-2010 Kia Borrego 2009 Audi Q7 2007-2010 WWW.TEXTRAIL.COM L-29 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL MULTI-FIT TRAILER CONNECTORS (Continued) Chrysler / Dodge / Jeep / Mitsubishi Part# 7000335 Ref # Description 42145 Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 blade RV round. Weatherproof. Fits the vehicles listed here: Mounting bracket included with connector. ELECTRICAL CONNECTION BRACKETS Part # Ref # 7000055 I-23 7000063 48595 Durable Plastic Bracket for mounting 4 wire flat plug. 7000325 38605 Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4, 5, or 6 way round connectors. 7000054 I-21 Aspen Early 2007 Pacifica 2003-2008 Ram 1500 2000-2008 Ram 2500/3500 2000-2009 Dakota 2000-2009 Durango 2000-Early07 Commander 2006-2009 Grand Cherokee 2000-2009 Liberty 2005-2007 Wrangler 2004-2009 Sprinter 2002-2008 Mitsubishi Raider 2006-2008 Description Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 7 or 9 pole connectors. Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4 or 6 way round connectors. ELECTRICAL ACCESSORIES Quick Splices Part# Ref # 7000076 QSNSNG Description 7000075 QSSNG 7000804 804 7000219 QSNS Quick Splice Without Stop 18-14 AWG 7000044 QSSSG Quick Splice Self-Strip 22-14 AWG with Silicone Gel 7000286 QSS Quick Splice Strip 18-14 AWG White Without Stop Non-Gel Quick Splice With Stop Blue 18-14 AWG. Blue Non-Gel 3M Quick Splice 804 Scotchlok 18-16 AWG Auto-Elec with Gel Blue With Stop 7000076 7000075 7000804 700044 Terminal Connectors Part# Ref # Description 7000267 TR14 Vinyl Funnel Terminal Ring 1/4" Eye 16-14 Gauge Blue 7000271 TR516 Vinyl Funnel Terminal Ring 5/16" Eye 16-14 Gauge Blue 7000033 TR38 Vinyl Funnel Terminal Ring 3/8" Eye 16-14 Gauge Blue 7000274 TR10 Vinyl Funnel Terminal Ring #10 Eye 16-14 Gauge Blue WWW.TEXTRAIL.COM L-30 Terminal Connectors also available insulated with nylon 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Quick Splice With Stop Yellow 12-10 AWG LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES (Continued) Coupler Terminal Connectors Part# Ref # Description 7000270 CTF Nylon Insulated Coupler Terminal 16-14 Gauge Blue Female 7000034 CTM Nylon Insulated Coupler Terminal 16-14 Gauge Blue Male 7000034 7000270 Butt Connectors Part# Ref # Description 7000268 BCVR22 Butt Connection Vinyl Insulated 22-18 Gauge Red 7000272 BCVY12 Butt Connection Vinyl Insulated 12-10 Gauge Yellow 7000273 BCVB16 Butt Connection Vinyl Insulated 16-14 Gauge Blue Butt Connectors also available insulated with Nylon Fork Terminal Connectors Part# Ref # Description 7000061 FC10Y Nylon Insulated Fork Terminal #10 10-12 Gauge Yellow 10-32 Terminal 7000060 FC10B Nylon Insulated Fork Terminal #10 16-14 Gauge Blue 10-32 Terminal 7000060 7000061 Bullet Terminal Connectors Part# Ref # Description 7000019 BLTCBM Nylon Insulated Bullet Terminal 16-14 Gauge Blue 0.157 Male 7000020 BLTCBF Nylon Insulated Bullet Terminal 16-14 Gauge Blue 0.157 Female 7000017 BLTCRM Nylon Insulated Bullet Terminal 22-16 Gauge Red 0.157 Male 7000018 BLTCRF Nylon Insulated Bullet Terminal 22-16 Gauge Red 0.157 Female 7000017 7000018 7000019 7000020 Terminal Pliers Part# Ref # Description 7000163 TPE Terminal Pliers Economy 10 Gauge - 22 Gauge Rubber Grip Handle 7000166 TPHD Terminal Pliers Heavy Duty 8 Gauge - 22 Gauge Rubber Grip Handle 7000163 7000166 LIGHTS & ELECTRICAL Cable Ties Part# Ref # Description 7000287 CT75 Cable Tie 50 Tensile Black 7-1/2" Overall Length 7000071 CT85 Cable Tie 40 Tensile Natural 8-1/2" Overall Length 7000311 CT15B Cable Tie 120 Tensile Black 15" Overall Length 7000068 CT15N Cable Tie 120 Tensile Natural 15" Overall Length 7000069 CT21N Cable Tie 120 Tensile Natural 21" Overall Length 7000028 CTMB Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Black 7000027 CTMN Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Natural 7000287 Circuit Breakers Part# Ref # Description 6500056 CBMB5 Circuit Breaker 5AMP with Mounting Bracket 6500003 CBMB15 Circuit Breaker 15AMP with Mounting Bracket 6500028 CBMB20 Circuit Breaker 20AMP with Mounting Bracket 6500029 CBMB30 Circuit Breaker 30AMP with Mounting Bracket 6500047 CBMB40 Circuit Breaker 40AMP with Mounting Bracket 6500048 CBMB50 Circuit Breaker 50AMP with Mounting Bracket WWW.TEXTRAIL.COM L-31 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES (Continued) Chrome Toggle Switches Part# Ref # Description 7000300 TS123 Toggle Switch 12-Volt 3-Terminals Mon-On-Off-Mon-On 50-Amp 1" Handle Screw Term Type Sngl Pole/Dbl Throw 7000321 TS126 Toggle Switch 12-Volt 6-Terminals On-Off 20-Amp 11/16" Handle Screw Term Type Dbl Pole/Dbl Throw 7000352 TS624 Toggle Switch 6-24-Volt 2-Terminals On-Off 50-Amp 1" Handle Screw Term Type Sngl Pole/Sngl Throw Toggle Switch 6-24 Volt 2-Terminals On-Off 50-Amp 1" Handle Screw Term Type Sngl Pole/Sngl Throw 44" 7000426 TS62444 Wires 7000151 TSR122 7000464 TSRP Toggle Switch Mounted in Recessed Plate 12-Volt 2-Position 20-Amp 11/16" Handle Screw Term Type Dbl Pole/Dbl Throw Aluminum Recessed Plate for Toggle Switch 7000151 7000464 Brass Push-Pull Switch Part# Ref # Description 7000152 PPS Push-Pull 15A/25A On-Off 1-1/4" x 3/8" Stem Sngl Pole / Sngl Throw Wire Nuts Part# Ref # Description 7000022 WNY Hard Wire Nut Min(2) 18 Gauge Max (3) 16 Gauge Yellow 7000021 WNO Hard Wire Nut Min(2) 18 Gauge Max (3) 10 Gauge Orange 7000022 7000021 Terminal Kits Part# Ref # Description 7000053 TK360N 7000052 TK360 Terminal Kit Insulated 360 Piece with Storage Box - No Pliers 7000014 TK430N Terminal Kit Nylon 430 Piece with Steel Storage Box & Pliers 7000015 TK430 Terminal Kit Nylon 430 Piece with Steel Storage Box & Pliers Terminal Kit Nylon 360 Piece with Storage Box - No Pliers 7000015 Electrical Tape Part# Ref # Description 7000265 PT60 Black Electrical Tape 3/4" x 60' 7000265 LIGHTS & ELECTRICAL Flashers Part# Ref # Description 7000098 7098 Flasher Elec 2-Blade 12V XHD 7000150 1206 Flasher Elec-Mech 2-Term 12V 7000107 7107 Flasher Elec 2-Blade 12V XHD Circuit Testers Part# Ref # Description 7000364 8901 6-Volt & 12-Volt System Circuit Tester 7000275 6392 12-Volt System Grabber Circuit Tester WWW.TEXTRAIL.COM 7000364 L-32 7000275 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES LED Connector Tester Part# Ref # Description 7000008 I-25 LED Connect Tester 4-Flat. Analyzes tail light, turn signal and ground 7000009 I-27 LED Connect Tester 7-Blade. Analyzes tail light, turn signal and ground 7000009 7000008 Tow Doctor Test Units Part# Ref # Description 7000305 50918 Tow Doctor Vehicle Test Unit with a 20-foot cord allowing one person to check a vehicle’s wire harness. Features test ground, auxiliary power, brake controller, brake, tail, directional and back-up lights. Adapts to 4-way flat, 6-way round or 7-RV blade round. Includes a heavy-duty carrying case to protect your Tow Doctor Test Unit. 7000306 50928 Tow Doctor Trailer Test Unit which enables one person to check a trailer’s wire harness. Features test for all trailer functions including left turn, brake, tail and backup lights; electric brake and auxiliary power. Trailer lights will illuminate as well as LED lights on tester to show function operation. Adapts to 4-way flat and 6 or 7-RV blade round. Includes battery terminal clips. Can be used with any 12-volt battery. Amperage meter shows actual amperage draw. For electric brakes, magnets are activated to determine correction operation. Includes a heavy-duty carrying case to protect your Tow Doctor Test Unit. 7000305 7000306 4-Flat Quick Fix Connector Part# Ref # Description 7000333 48195 4-Flat Quick Fix Connector. Includes Vehicle & Trailer Ends. 7000333 Converter Part# Ref # Description 8100110 48919 Tail light converter. Converts 5-wire system down to a 4-wire system. Utilizes turn signal separate from stop / tail lamp. 8100110 Module Part# Ref # 7000148 118187 Description Module - Light Power 4-Amp maximum per circuit. 7000148 LIGHTS & ELECTRICAL Junction Box Part# Ref # 7000142 JJB Description 7000142 6 or 7-Terminal Junction Box Magnetic Strap & Bracket Part# Ref # Description 7000328 48095 Magnetic Bracket that keeps 4-Flat out of harms way 7000329 48585 Heavy Duty Magnetic Strap that protects dangling wires and allows you to store loose wires out of harms way 7000329 7000328 Convoluted Wire Loom Part# Ref # Description 9900053 PCT0375 3/8" Convoluted Split Poly Wire Loom 9900052 PCT0500 1/2" Convoluted Split Poly Wire Loom 9900145 PCT0750 3/4" Convoluted Split Poly Wire Loom WWW.TEXTRAIL.COM Wire Loom L-33 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Part# 7000161 7000162 7000157 Ref # NAC4 NAC6 AC4 7000158 AC6 7000159 AC8 7000160 AC12 7000182 AC16 7000183 AC24 Part# 9900004 9900005 9900204 Ref # FC316 FC14 FC38 Wire Loom Clamps Description 1/4" Nylon Wire Loom Clamp 0.167" Mounting Hole 3/8" Nylon Wire Loom Clamp 0.167" Mounting Hole 1/4" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 3/8" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1/2" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 3/4" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1-1/2" Metal Wire Loom Clamp w/ Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 7000160 7000161 Wire Frame Clips Description 3/16"ID Slip-On Steel Wire Frame / Panel Clip 1/4"ID Slip-On Steel Wire Frame / Panel Clip 3/8"ID Slip-On Steel Wire Frame / Panel Clip 9900004 Fuse Holders Part# 7000132 7000133 7000134 7000135 Ref # 11039 11040 11044 11045 Description In-Line Glass AGC Fuseholder with 30-Amp Fuse 12 Gauge Wire In-Line Max Blade ATC/ATO Fuseholder Waterproof 8 Gauge Wire In-Line Mini Blade ATC/ATO Fuseholder 30-Amp 14 Gauge Wire In-line Standard Blade ATC/ATO Fuseholder 20-Amp 12 Gauge Wire 7000132 7000133 7000134 Fuses Ref # AGC20A AGC25A ATCM5A ATCM10A ATCM15A ATCM20A ATCM25A ATCM30A ATC5A ATC10A ATC15A ATC20A ATC25A ATC30A ATC40A ATCMAX20 ATCMAX30 ATCMAX40 ATCMAX50 ATCMAX60 Description Fuse 20 Amp Glass AGC Fuse 25 Amp Glass AGC Fuse 5 Amp Mini Blade Tan ATC Fuse 10 Amp Mini Blade Red ATC Fuse 15 Amp Mini Blade Blue ATC Fuse 20 Amp Mini Blade Yellow ATC Fuse 25 Amp Mini Blade Clear ATC Fuse 30 Amp Mini Blade Green ATC Fuse 5 Amp Standard Blade Tan ATC/ATO Fuse 10 Amp Standard Blade Red ATC/ATO Fuse 15 Amp Standard Blade Blue ATC/ATO Fuse 20 Amp Standard Blade Yellow ATC/ATO Fuse 25 Amp Standard Blade Clear ATC/ATO Fuse 30 Amp Standard Blade Green ATC/ATO Fuse 40 Amp Standard Blade Orange ATC/ATO Fuse 20 Amp Maxi Blade Yellow ATC Fuse 30 Amp Maxi Blade Green ATC Fuse 40 Amp Maxi Blade Orange ATC Fuse 50 Amp Maxi Blade Red ATC Fuse 60 Amp Maxi Blade Blue ATC WWW.TEXTRAIL.COM L-34 LIGHTS & ELECTRICAL Part# 7000317 7000318 7000126 7000114 7000116 7000119 7000121 7000124 7000125 7000113 7000115 7000117 7000120 7000122 7000073 7000118 7000123 7000169 7000168 7000167 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Replacement Bulbs Part # Ref # Bulb Type Design Volts 8100025 8100409 8100029 8100026 8100022 8100023 8100411 8100412 8100021 8100024 8100201 8100027 8100028 8100410 194 1157 1073 1003 1141 93 TL1004 1893 1895 89 97 57 Wedge Wedge S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet 14 14 12.8 12.8 12.8 12.8 12.8 12.8 12.8 14 14 13 13.5 14 0.27 0.24 2.10 2.10 1.80 0.94 1.44 1.04 0.94 0.33 0.27 0.58 0.69 0.24 2 2 32 32 32 15 21 15 15 2 2 6 4 2 2500 500 1200 1200 200 100 1000 1000 100 7500 2000 750 5000 500 Heavy Duty Clearance/Marker Clearance/Marker/Instrument Back-up/Clearance Stop/Park/Tail/Signal Back-up Dome/RV Interior Dome/RV Back-up Porch Dome/RV Interior Instrument Indicator Instrument Interior Heavy Duty License Clearance/Marker/Instrument 8100413 8100247 67 471 Mini Bayonet Mini Bayonet 13.5 14.4 0.59 12 4 1 5000 1000 License Auto Instrument 168 1156 Design Volts Candle Power Life Hours Service Design Watts/Amps Candle Power Life Hours Service Description The voltage at which the lamp is designed for rated amperes, candle power and life characteristics. The average value of total light output of miniature lamps at design volts. The rated average life to be expected when operating at design volts. Actual service can vary. The major applications are listed. In most cases, bulbs can serve other applications. 14-Gauge Single Strand Primary Wire LIGHTS & ELECTRICAL Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.117. Available in 20’, 100’, 500’ and 1000’ spools. Wire Length on Spool Part # Ref # Description 9900083 00483 Primary Wire 14-Gauge Single Strand Black 20’ 9900085 00481 Primary Wire 14-Gauge Single Strand Blue 20’ 9900084 00484 Primary Wire 14-Gauge Single Strand Brown 20’ 9900088 9900081 00479 00482 Primary Wire 14-Gauge Single Strand Green Primary Wire 14-Gauge Single Strand Red 20’ 20’ 9900087 00480 Primary Wire 14-Gauge Single Strand White 20’ 9900082 00478 Primary Wire 14-Gauge Single Strand Yellow 20’ 9900022 02410 Primary Wire 14-Gauge Single Strand Black 100’ 9900023 02414 Primary Wire 14-Gauge Single Strand Blue 100’ 9900024 02413 Primary Wire 14-Gauge Single Strand Brown 100’ 9900025 02411 Primary Wire 14-Gauge Single Strand Green 100’ 9900026 02408 Primary Wire 14-Gauge Single Strand Red 100’ 9900027 02409 Primary Wire 14-Gauge Single Strand White 100’ 9900028 02412 Primary Wire 14-Gauge Single Strand Yellow 100’ WWW.TEXTRAIL.COM L-35 Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.117 Available in 20’, 100’, 500’ and 1000’ spools. 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Part # 14-Gauge Single Strand Primary Wire (Continued) Wire Length on Ref # Description Spool 9900039 02424 Primary Wire 14-Gauge Single Strand Black 500’ 9900040 02428 Primary Wire 14-Gauge Single Strand Blue 500’ 9900041 02427 Primary Wire 14-Gauge Single Strand Brown 500’ 9900042 02425 Primary Wire 14-Gauge Single Strand Green 500’ 9900035 02422 Primary Wire 14-Gauge Single Strand Red 500’ 9900043 02423 Primary Wire 14-Gauge Single Strand White 500’ 9900044 02426 Primary Wire 14-Gauge Single Strand Yellow 500’ 9900046 02438 Primary Wire 14-Gauge Single Strand Black 1000’ 9900030 02442 Primary Wire 14-Gauge Single Strand Blue 1000’ 9900031 02436 Primary Wire 14-Gauge Single Strand Red 1000’ 9900033 02437 Primary Wire 14-Gauge Single Strand White 1000’ Part# Ref # 16-Gauge Single Strand Primary Wire Description 9900092 9900098 9900095 9900093 9900089 9900091 9900094 9900099 9900128 9900132 9900131 9900129 9900126 9900127 9900130 9900133 02360 02364 02363 02361 02358 02359 02362 02365 02374 02378 02377 02375 02372 02373 02376 02379 Primary Wire 16-Gauge Single Strand Black Primary Wire 16-Gauge Single Strand Blue Primary Wire 16-Gauge Single Strand Brown Primary Wire 16-Gauge Single Strand Green Primary Wire 16-Gauge Single Strand Red Primary Wire 16-Gauge Single Strand White Primary Wire 16-Gauge Single Strand Yellow Primary Wire 16-Gauge Single Strand Orange Primary Wire 16-Gauge Single Strand Black Primary Wire 16-Gauge Single Strand Blue Primary Wire 16-Gauge Single Strand Brown Primary Wire 16-Gauge Single Strand Green Primary Wire 16-Gauge Single Strand Red Primary Wire 16-Gauge Single Strand White Primary Wire 16-Gauge Single Strand Yellow Primary Wire 16-Gauge Single Strand Orange Part# Ref # 18-Gauge Single Strand Primary Wire Description 9900118 9900051 9900117 9900115 9900116 02308 02309 02311 02312 02313 Primary Wire 18-Gauge Single Strand Red Primary Wire 18-Gauge Single Strand White Primary Wire 18-Gauge Single Strand Green Primary Wire 18-Gauge Single Strand Yellow Primary Wire 18-Gauge Single Strand Brown Wire Length on Spool LIGHTS & ELECTRICAL 100’ 100’ 100’ 100’ 100’ 100’ 100’ 100’ 500’ 500’ 500’ 500’ 500’ 500’ 500’ 500’ Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 16 Gauge Stranding 19/29 Nominal OD 0.102 Available in 100’ and 500’ spools. 100’ 100’ 100’ 100’ 100’ Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 18 Gauge Stranding 16/30 Nominal OD 0.095 Available in 100’ spools. WWW.TEXTRAIL.COM L-36 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Part # 9900034 Ref # 14-Gauge Jacketed Duplex Wire Description Jacketed Duplex Wire 14-Gauge Two Strand Grey Jacket with Black & White Conductors. Heavy-duty PVC jacketed wire meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 221 degrees Fahrenheit (105 degrees Celsius). Nominal cold temperature rating of –22 degrees Fahrenheit (-30 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.200 x 0.320 (1000’ wire length on spool) 03208 Trailer Cable Wire PVC Insulated, meets SAE J1128 specifications and is RoHS compliant. Nominal cold temperature rating of -7.6 degrees Fahrenheit (-22 degrees Celsius). Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). Available in 100’ and 500’ spools. Part # 9900097 Ref # Wire Length on Spool Description 04914 Trailer Cable Wire 12/6-10/1 Gauge Stranding 19/25-19/23 Nominal OD 0.600 Yellow/Brown/Red/Black/Blue/Green/White with Black Jacket. 100’ 9900038 04905 Trailer Cable Wire 14/4 Gauge Stranding 19/27 Nominal OD 0.410 Black/Red/Brown and White Rotation. 100’ 9900003 04922 Trailer Cable Wire 16/6 Gauge Stranding 19/29 Nominal OD 0.425 Green/Blue/Yellow/Black/Red and Brown Rotation. 500’ 04926 Trailer Cable Wire 14/6 Gauge Stranding 19/27 Nominal OD 0.500 Red/Blue/Green/ Yellow/Brown and Black Rotation. 500’ 9900045 Bonded Parallel Wire LIGHTS & ELECTRICAL All copper strand core wire meets SAE J1128 specifications and is RoHS compliant. Designed especially for RVs, and boat and utility trailers. Nominal cold temperature rating of -22 degrees Fahrenheit (-30 degrees Celsius). Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). Available in 100’, 500’ and 2500’ spools. Part # Ref # Description Wire Length on Spool 9900010 02925 Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires. 500’ 9900021 98634 Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires. 2500’ 9900120 02921 Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. 100’ 9900050 02922 Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. 500’ 9900020 99945 Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. 2500’ 9900049 02916 Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires. 500’ 9900075 99604 Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires. 2500’ 9900119 02912 Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires. 100’ 9900048 02913 Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires. 500’ 9900074 99944 Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires. 2500’ WWW.TEXTRAIL.COM L-37 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL CONSPICUITY, LENSES & REFLECTORS Part # Ref # 8100299 KCT6R6W Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 6-inches of Red and 6-inches of White. 2-inches wide. 3M 150’ Roll 8100456 KCT11R7W Reflective Conspicuity Tape. Adhesive backed tape kiss cut at 18-inch strips. Strips are 11-inches of Red and 7-inches of White. 2-inches wide. Sold by foot. 150’ Roll 8100307 CT6R6W Reflective Conspicuity Tape. Adhesive backed tape is 6-inches of Red and 6-inches of White. 2-inches wide. 150’ Roll Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inch strips. 6-inches of Red and 6-inches of White. 2-inches wide. Avery Dennison 150’ Roll 150’ Roll 8100306 KCT6R6WA Description 8100303 KCT12W Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 2-inch wide White tape. 8100300 CTS12W Reflective Conspicuity Tape. Adhesive backed White 12” strips. 2-inches wide. 12” Strips CTS18RW Reflective Conspicuity Tape. Adhesive backed tape in 18-inch strips. Strips are 11-inches of Red and 7-inches of White and are 2-inches wide. 18” Strips 8100301 RE-11AB Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16” centers. Amber. RE-11RB Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16” centers. Red. 8100206 RE-13AB 3-3/16” Round Reflector for surface mount on a single screw. Amber. 8100207 RE-13RB 3-3/16” Round Reflector for surface mount on a single screw. Red. 8100222 RE-21AB 3-3/16” Round Acrylic Reflector for surface mount. Self-adhesive Amber. 8100223 RE-21RB 3-3/16” Round Acrylic Reflector for surface mount. Self-adhesive Red. 8100160 RE-31AS 3” Armored Reflector. Housed in rust-proof aluminum housing that mounts with screws. 8100225 8100224 Ref # AL-8RB A-2RB A-8RB A-9RB A-16RB A-24RB A-40RB A-43RB A-11AB A-11RB A-38AB A-38RB A-42AB A-42RB A-58AB A-58RB A-68AB A-68RB A-71AB A-71RB A-81AB A-81RB A-82AB A-82RB 8100456 8100307 8100306 8100303 8100300 8100301 8100160 8100225 8100206 8100207 8100224 8100222 8100223 Lenses Description LED Tail Light Red Lens for 8100365, 8100366, 8100368, and 8100369 LED lights. LED Side Marker Red Lens for 8100365 and 8100366 LED lights. Tail Light Red Lens for 8100389, 8100390, 8100170 and 8100191 lights. Side Marker Red Lens for 8100477 and 8100478 lights. Lens Set: Red Tail and Side Marker Lens for 8100196 and 8100197 lights. Red Lens for 8100520 and 8100509 lights. Red Lens for 8100187 lights. Safety Triangle Reflector Kit Red Reflector Optics Lens for 8100187 lights. Part# Ref # Description Amber Lens for 8100139 lights. Triangle Safety Reflector Kit. Includes three safety 8850045 TRI Red Lens for 8100138 lights. warning reflector triangles with a plastic storage box Amber Lens for 8100497 lights. Red Lens for 8100498 lights. Amber Lens for 8100499 lights. Red Lens for 8100500 lights. Amber Lens for 8100102 lights. Red Lens for 8100103 lights. Safety Flares Amber Lens for 8100432 lights. Part# Ref # Description Red Lens for 8100433 lights. 8850013 FLARE Safety Flare. Burns for 20-minutes Amber Lens for 8100034 lights. Red Lens for 8100033 lights. Amber Lens for 8100098 lights. Red Lens for 8100099 lights. Amber Lens for 8100081 lights. Red Lens for 8100153 lights. WWW.TEXTRAIL.COM L-38 2010 Copyright by TexTrail, Inc. LIGHTS & ELECTRICAL Part# 8100481 8100063 8100151 8100156 8100130 8100122 8100128 8100154 8100140 8100141 8100167 8100168 8100100 8100101 8100164 8100074 8100425 8100401 8100121 8100123 8100127 8100126 8100082 8100227 8100299 T E X T R A I L PAC K AG E P R O D U C T S ELECTRICAL TEXTRAIL PACKAGE LINE PART # DESCRIPTION 7000038-01 ADAPTER 6-WAY ROUND TO 4-WAY FLAT 7000041-01 ADAPTER 7-WAY RV TO 4-WAY FLAT 7000045-01 ADAPTER 7-WAY RV TO 6-WAY ROUND 7000051-01 ADAPTER 7-WAY RV TO 6-WAY ROUND & 4-WAY FLAT 7000313-01 ADAPTER 6-WAY ROUND TO 7-WAY RV (flexible) 6500039-01 BRAKE HARNESS-GM 99-07 6500049-01 BRAKE HARNESS-FORD 05-08 SUPER DUTY 8100118-01 LIGHT KIT COMPLETE W/Stop-Turn-Tail-Clearance 6500002-01 BRK CONTROL ENGAGE HAYES 1-3 AXLE DIGITAL TIMED 6500009-01 BRK CONTROL ENERGIZE III 1-2 AXLE PROPORTIONAL 6500011-01 BRK CONTROL SYNCHRONIZER HAYES 1-2 AXLE TIMED DELAY 6450172-01 MAGNET 10"x 1.5" 2.8K OVAL, DEXTER 6450165-01 MAGNET 10"x 2.25" 3.5K OVAL, DEXTER 6450159-01 MAGNET 12"x 2" ROUND, PRE-1988 HAYES 6450158-01 MAGNET 10"x 2.25" OVAL, HAYES-DEXTER 6450166-01 MAGNET 12"x 2" 5.2-6K OVAL, DEXTER 6450174-01 MAGNET 12.25"x 3.375" & 4" DEXTER 6450169-01 MAGNET 12.25"x 5" 12K OVAL, DEXTER 6450157-01 MAGNET 10"x 2.25" ROUND HAYES PKG RED WIRES (PRE-1988) 6450160-01 MAGNET 12.25"x 2.5" 7.2K OVAL, DEXTER RED WIRE 6450161-01 MAGNET 12"x 2" 7K OVAL, DEXTER BLK WIRE 6450162-01 MAGNET VENT 12"x 3.25" & 12.25"x 3.5" 8-12K HAYES 6450168-01 MAGNET 12.25"x3.5" 10K WARNER 6450170-01 MAGNET 7" x 1.25" 2K ROUND, DEXTER POST-04/1990 6450171-01 MAGNET 7" x 1.25" 2K ROUND DX PRE 4-90 YW WIRES TEXTRAIL 6450173-01 MAGNET 12.25"x 3.375" 7.2-8K OVAL DEXTER WHITE WIRE 6450183-01 MAGNET 12.25"x 5" 15K OVAL DEXTER BLUE WIRE PART # 7350209-01 7350315-01 8200150-01 8200221-01 8200176-01 8200177-01 8200220-01 6300082-01 6300079-01 6300031-01 TOWING DESCRIPTION RECEIVER HITCH PIN 1/2" x 2-5/8" W/KEEPER RECEIVER HITCH PIN 5/8" x 3" W/KEEPER RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS (T3/DB-3)) RECEIVER LOCK SET 5/8"-7/8"SPAN COUPLER KEY'D ALIKE (TM31) RECEIVER LOCK SET RECEIVER 5/8" 2-1/2" KEY'D ALIKE (TM32) LOCKING LUG NUT W/ KEY 1/2"NUT 3/4"SOCKET HITCH BALL 2" X 1" X 2-1/4"SHANK 6K CHROME HITCH BALL 2-5/16" X 1" X 2-1/4"SHANK 7.5K CHROME HITCH BALL 2-5/16" X 1-1/4"" X 2-1/4"SHANK 10K CHROME WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc. T E X T R A I L PAC K AG E P R O D U C T S RUNNING GEAR DESCRIPTION BEARING KIT 1" BT8 SPINDLE L44643 BEARING (1 Wheel) BEARING KIT 1.125" BT16 SPINDLE (1 Wheel) BEARING KIT #84 SPINDLE (1 Wheel) BEARING KIT #42 15123/25580 BEARINGS (1 Wheel) BEARING KIT #42 14125A/25580 BEARINGS (1 Wheel) GREASE CAP 1.99"OD EZ-LUBE W/PLUG (Qty.2) GREASE CAP 2.45"OD DRIVE-IN (Qty.2) GREASE CAP 2.45"OD EZ-LUBE W/PLUG, 5.2-6K (Qty.2) GREASE CAP 2.72"OD DRIVE-IN (Qty.2) GREASE CAP 2.72" EZ-LUBE W/PLUG, 5.2-8K (Qty.2) OIL CAP KIT W/O-RING & PLUG 6-8K&9K(PRE-10/89) DEXTER OIL CAP KIT W/O-RING & CAP 9K(POST-10/89)-15K DEXTER WHEEL BOLT 60 DEG 1/2"-20 x 0.88 (Qty.4) WHEEL BOLT 90 DEG 9/16"-18 x1.12 (Qty.4) SHACKLE BOLT & NUT KIT 9/16"-18 X 3" (Qty.4) SHACKLE BOLT & NUT KIT 9/16"-18 X 3-1/2" (Qty.4) PRESS-IN STUD 5/8" X 3.16" 9-12K (Qty.4) PRESS-IN STUD 1/2" X 1.84" 3.5-7K (Qty.4) WHEEL NUT CONE 60 DEG 1/2"-20 (Qty.6) WHEEL NUT CONE 60 DEG 9/16"-18 (Qty.4) WHEEL NUT CONE 90 DEG 5/8"-18 (Qty.4) RIM CLAMP MOBILE HOME & UTILITY 14.5" RIMS (Qty.5) SHACKLE STRAP KIT 2-1/4" HOLE CTR 1-1/4"W X 3-1/2"L (Qty.4) SHACKLE STRAP KIT 2-5/8" HOLE CTR 1-1/4"W X 4"L (Qty.4) SHACKLE STRAP KIT 3 1/8" HOLE CTR 1-1/4"W X 4-1/2" (Qty.4) NYLON BUSHING KIT 9/16" ID X 11/16"OD X 2"L (Qty.8) NYLON BUSHING KIT 9/16"ID X 3/4"OD X 1-3/4"L (Qty.6) NYLON BUSHING KIT 9/16"ID x 11/16"OD X 1-3/4"L (Qty.8) SPINDLE NUT 1"-14 TONGUE WASHER, NUT, COTTER PIN (Qty.2) SPINDLE NUT 1"-14 D-WASHER, NUT & COTTER PIN (Qty.2) SPINDLE NUT 1"-14 TANG WASHER, NUT & COTTER PIN (Qty.2) SPINDLE NUT 1"-14 PLAIN WASHER, NUT & COTTER PIN (Qty.2) U-BOLT PKG ROUND 1/2"DIA X 2-3/8"W X 5.5"L, 3.5K (Qty.2) U-BOLT PKG ROUND 1/2"DIA x 3" W x 7"L, 5.2-6K (Qty.2) U-BOLT PKG SQUARE 9/16"DIA X 1-3/4W X 5"L, 2K (Qty.2) U-BOLT PKG ROUND 9/16" DIA X 3"W X 7.5"L, 5.2-6K (Qty.2) U-BOLT PKG SQUARE 9/16"DIA X 2"W X 5-1/2"L, 2-3.5K (Qty. 2) U-BOLT KIT ROUND 3/8"DIA X 1-3/4"W x 4"L, 2K (APUBR10) U-BOLT KIT ROUND 9/16"DIA X 3"W X 7.5"L, 5.2-6K (APUBR9) U-BOLT KIT ROUND 1/2"DIA X 2-3/8"W X 5-1/2"L, 3.5K (APUBR1) U-BOLT KIT ROUND 1/2"DIA X 3"W X 7"L, 5.2-6K (APUBR2) HANGER KIT SNGL AXLE 1.75"DIA DBL-EYE SPG 2-7K (APS1-TT) HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT3) HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT5) WWW.TEXTRAIL.COM TEXTRAIL PACKAGE LINE PART # 7800037-01 7800038-01 7800059-01 7800070-01 7800071-01 7700025-01 7700027-01 7700016-01 7700186-01 7700018-01 7700029-01 7700030-01 7700008-01 7700120-01 9000030-01 9000031-01 7700107-01 7700109-01 7700045-01 7700036-01 7700048-01 7700058-01 9000163-01 9000223-01 9000164-01 9000039-01 9000054-01 9000038-01 8750100-01 8750102-01 8750103-01 8750101-01 9000244-01 9000225-01 9000239-01 9000245-01 9000242-01 9100052-01 9100048-01 9100045-01 9100047-01 9100013-01 9100014-01 9100015-01 2010 Copyright by TexTrail, Inc. INDEX INDEX 2,000 lb - 7,000 lb 1.75" Double Eye Springs B-2 10,000 lb General Duty TORFLEX® 2,000 lb - 7,000 lb 1.75" Double Eye Springs B-4 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs A-66 B-16 2,000 lb - 7,000 lb 1.75" Double Eye Springs B-8 10,000 lb Heavy Duty Brakes A-72 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs B-3 10,000 lb Heavy Duty D100HD Leaf Spring Axle A-67 2,000 lb Brakes A-13 10,000 lb Heavy Duty Hub Group A-70 2,000 lb Disc Brakes A-14 10,000 lb Heavy Duty Suspension A-67 2,000 lb Hub Group A-12 10,000 lb Heavy Duty TORFLEX® A-66 2,000 lb TORFLEX® / D20 Leaf Spring Axle A-0 12,000 lb Brakes A-72 3,500 lb - 8,000 lb 2" Slipper Springs B-6 12,000 lb D120 Leaf Spring Axle. A-67 A-70 3,500 lb - 8,000 lb 2" Slipper Springs B-7 12,000 lb Hub Group 3,500 lb - 8,000 lb 2" Slipper Springs B-9 15,000 lb Brakes A-72 3,500 lb - 8,000 lb 2" Slipper Springs B-6 15,000 lb D150 Leaf Spring Axle A-67 3,500 lb Brakes A-20 15,000 lb Hub Group A-70 3,500 lb Disc A-26 22,500 lb -25,000 lb Brakes A-81 3,500 lb Electric Brakes A-20 22,500 lb -25,000 lb D200 Leaf Spring Axle A-76 3,500 lb Hub Group A-18 22,500 lb -25,000 lb Hub Group A-76 3,500 lb TORFLEX® / D35 Leaf Spring Axle A-16 ABS Trailer Kit K-14 4,400 lb Brakes A-30 Actuating Couplers K-6 4,400 lb D44 Leaf Spring Axle A-28 Adapter for Receiver Tube E-4 4,400 lb Hub Group A-29 Adapter Sleeves E-4 6,000 lb Brakes A-44 Adapters L-28 6,000 lb D60 Leaf Spring Axle A-31 Adjustable Clevis D-4 6,000 lb Disc Brakes A-51 Adjustable Clevis E-6 6,000 lb Electric Brakes A-44 Adjustable Pintle Eye D-4 D-4 6,000 lb Hub Group A-37 Adjustable Tongue Coupler 6,000 lb Suspension A-36 Adjustable Tow Bar E-9 6,000 lb TORFLEX® A-33 A-Frame Coupler D-3 7,000 lb Brakes A-44 A-Frame Jack D-8 7,000 lb D70 Leaf Spring Axle A-32 Agricultural & Industrial Winches D-15 A-85 7,000 lb Disc Brakes A-53 Agricultural Hubs and Components 7,000 lb Electric Brakes A-44 Air Conditioning H-7 7,000 lb Hub Group A-39 Air Suspension System B-29 G-5 7,000 lb Suspension A-36 All Purpose Stain Remover 7,000 lb TORFLEX® A-34 Aluminum Ball Mounts 7,200 lb Brakes A-55 Aluminum Box (Underbody, Tongue & Specialty) 7,200 lb D72 Leaf Spring Axle A-32 Aluminum Trim 7,200 lb Disc Brakes A-56 Axle Straps F-5 7,200 lb Hub Group A-41 B&W Adjustable Receiver / Pintle Hitch E-6 E-6 H-17 H-7 thru H-8 7,200 lb Suspension A-36 B&W Gooseneck Hitches E-12 7,200 lb TORFLEX® A-35 B&W RV 5th Wheel E-12 8,000 lb Brakes A-58 B&W Tow & Stow Receiver Hitches E-5 8,000 lb D80 Leaf Spring Axle A-32 Back-Up Assist Camera E-7 8,000 lb Disc Brakes A-63 Back-Up Assist Camera J-12 8,000 lb Electric Brakes A-58 Back-Up Lights L-20 H-5 8,000 lb Hub Group A-42 Ball Corners 8,000 lb Suspension A-36 Ball Mounts E-4 8,000 lb TORFLEX® A-35 Balls E-7 9,000 lb 2" Slipper Springs B-11 Bar Lock Assembly J-5 9,000 lb 2" Slipper Springs B-11 Batteries & Chargers K-2 9,000 lb Brakes A-72 Bearing Kits A-90 9,000 lb D90 Leaf Spring Axle A-66 Bearing Protectors A-94 A-89 9,000 lb Disc Brakes A-71 Bearings 9,000 lb Hub Group A-69 Bins F-6 9,000 lb Suspension A-66 Bolt-On Receiver Hitches E-2 10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye B-13 Bolt-On Swivel Jack D-11 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry) B-15 Box (Aluminum & Powder Coated Underbody & Tongue, Specialty) H-17 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) B-14 Bracket for Electrical Connectors L-30 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye B-13 Brackets (Channel & Adjustable) E-6 10,000 lb General Duty Brakes A-72 Brackets for Lighting L-23 10,000 lb General Duty D100GD Leaf Spring Axle A-66 Brake Cleaner G-3 10,000 lb General Duty Disc Brakes A-71 Brake Control & Actuator Replacement Parts K-8 10,000 lb General Duty Hub Group A-69 Brake Control & Actuators 10,000 lb General Duty Suspension A-66 Brake Controllers WWW.TEXTRAIL.COM K-6 K-3 thru K-5 2010 Copyright by TexTrail, Inc. INDEX Brake Fluid G-3 Double Eye Springs 2,000 lb - 7,000 lb 1.75" Brake Mounting Flanges A-87 Draw Bar B-2, B-4 & B-8 D-6 Brake Mounting Hardware A-87 Drill Bits H-16 & J-11 Breakaway Kits K-2 D-Rings F-2 & J-7 Breakaway Switch & Pin K-2 Drop Hitches E-3 Bulbs L-35 Dropleg Jack D-12 Bumper Receiver Hitches E-3 Dropleg Jack & Landing Gear Accessories D-13 Bumpers J-11 Dump Tarp Kits H-19 Bushings B-20 Edge Guard H-6 Butt Hinge J-3 Electric Fan H-7 Butterfly Latch J-9 Electric Winches D-16 Cab Lock Handles J-5 Electrical Accessories Cab Slam Locks J-5 Electro/Hydraulic Actuators K-9 Equalizers B-25 Cable Ties L-31 L-28 - L-34 Cam Lock Assembly J-5 E-Track F-3 Cap Plugs J-11 Extender for Receiver Tube E-4 Caps for Gate Ramp Assemblies H-15 EZ Jack D-12 Cargo Carrier Platforms E-8 Fenders H-2 thru H-4 Cargo Management System F-4 Fifth Wheel Hitches E-10 Catch / Pull Latch J-9 Flashing & Revolving Lights L-22 Ceiling Heat & Air Units H-7 Flat Mount Coupler D-5 Center Caps A-91 Fleet Count L-2 Center Caps C-6 Floor Screws H-10 Certificate / Permit Holder L-26 Flush Latches J-4 Chain F-3 Flush Mount Hinges J-3 Chains J-17 Folding Gooseneck Hitch Balls Chargers & Batteries K-2 Gas / Water Cooler Holder Chemicals G-3 Gate Lift Assist Chrome Edge Trim Chrome Wheel Nuts Cleaner Clearance & Side Marker Lights H-7 thru H-8 E-11 F-6 H-14 Gear Oil G-3 C-5 Generators H-8 G-5 Gooseneck Channels E-9 Gooseneck Coupler D-5 L-2, L-7 & L-13 Clevis D-3 Gooseneck Hitch Plates E-9 Combination Hanger Kits B-7 Gooseneck Hitches E-11 Combination Pintle Hitch E-7 Grab Handles F-1, J-2 &J-7 Connectors L-28 Gravel Guard H-6 Conspicuity Tape L-38 Grease G-3 Grease & Oil Seals A-88 Continuous Hinges J-3 Convert-A-Ball® E-5 Grease Caps Corner Protectors F-5 Grommets A-91 L-25 - L-26 Coupler Hardware Kit D-3 Gussets H-6 Coupler Latch Repair Kit D-6 Hand Towels G-5 Cushioned Ball Mounts E-5 Handles (Cab Lock) D20 Leaf Spring Axle A-10 Handles (Grab) J-5 F-2, J-2 & J-7 D35 Leaf Spring Axle A-16 Hangers B-24 D44 Leaf Spring Axle A-28 Hardener G-6 D60 Leaf Spring Axle A-31 Hasp J-5 D70 Leaf Spring Axle A-32 Heating Units H-7 D72 Leaf Spring Axle A-32 Heavy Duty Ball Mounts D80 Leaf Spring Axle A-32 Heavy Duty Jack E-4 D-12 D90 Leaf Spring Axle A-66 Heavy Duty Suspension System B-27 D100GD Leaf Spring Axle A-66 Heavy Duty Wheel Mounting Hardware A-93 D100HD Leaf Spring Axle A-67 Hinge Pin J-3 D120 Leaf Spring Axle. A-67 Hinges J-3 D150 Leaf Spring Axle A-67 Hitch Balls E-7 D200 Leaf Spring Axle A-76 Hitch Pins J-8 "D" Bumpers H-12 Holland Mini Fifth Wheel E-9 Dead Bolt Flush Latch Decorative Brackets Direct Weld Swivel Jacks J-4 L-24 & L-25 Hooks J-4 F-3 & J-8 C-5 Hub Covers C-6 Door Holders J-6 Hydraulic Hoist Systems Double Ball Mount E-4 Hydraulic Line Kit K-10 Double Eye Springs B-19 Hydraulic Line Kit (Flexible) K-12 WWW.TEXTRAIL.COM H-19 2010 Copyright by TexTrail, Inc. INDEX Hub Caps J-6 Door Holdbacks D-10 Hood Latch INDEX Hydraulic Line Kit (Tandem Dual) L-2, L-9 & L-17 Incandescent Lighting L-13 Ratchet F-5 Ratchet Straps F-5 Receiver Accessories E-5 thru E-7 E-4 Interchangeable Hitch Balls E-5 Receiver Ball Mounts Interior & Dome Lights L-22 Receiver Hitch Pins J-8 Jack Foot and Caster D-14 Receiver Locks E-7 D-9 Receiver Locks J-12 Jack Repair Parts King Pins Landing Gear Landing Gear & Dropleg Jack Accessories Latches D-5, E-9 & J-11 Receiver Tube Cover E-6 D-13 Receiver Tubes D-13 Reducer G-6 Reflective Tape L-38 Reflectors L-38 J-4 & J-9 E-3 & E-8 LED Light Kits L-13 LED Lighting L-2 & L-7 Respirators & Scotch Brite™ G-2 L-2 Retaining Ring Swivel Jack D-11 LED Micro-Flex™ Lighting Lenses for All Lighting License Lights L-38 L-13 & L-20 Retaining Rings A-94 Rim Clamps A-94 Light Plugs, Pigtails & Lead Wires L-26 Rings Light Protectors & Brackets H-7 Rivets & Rivet Tools H-10 & J-10 Linch Pins J-9 Rivets & Rivet Tools H-10 & J-10 Links F-3 Rockshield H-6 Links J-8 Roof Bows (Round Pipe) H-6 Liquid Storage Tanks H-18 F-2 & J-7 Roof Bows (Square Tube) H-5 F-3 Roof Caps H-5 Load Locker™ F-4 Rope Rings F-2 & J-7 Locking Lug Nuts C-5 Round Tube Swivel Jack D-9 Locks J-12 Round U-Bolts B-22 Lubricants G-3 Rubber Bumpers J-11 Lug Wrench C-5 Rubber Mats H-12 F-5 & H-19 Load Binder Marine Jack D-7 Rubber Straps Marine U-Bolts B-23 Rumber® Products H-11 Metal Surface Cleaner G-5 RV 5th Wheels E-10 Micro-Flex™ LED Lighting L-2 RV Generators H-8 Motorcycle Wheel Chock F-6 RV Towing Hitch E-3 Safety Chains J-18 D-11 Mounting Accessories L-23 & L-24 Mounting Rails (5th Wheels) E-11 Scissor Jack Mounting Rails (Folding Ball) E-10 Sealants Mud Flaps H-12 Self Tapping Torx® Head Floor Screws Nose Bows H-5 Shackle Straps Nose Caps H-5 Simulators C-6 Nose Plate D-6 Single Axle Fenders & Fender Backs H-2 Oil Caps A-91 Single Axle Hanger Kits B-2 Packaged U-Bolts B-23 Single Speed Winches D-15 G-4 H-10 & J-10 B-20 Paddle Latches J-4 Slam Locks J-5 Penetrating Oil G-3 Slats H-5 G-2 Pin Stripers Slipper Spring 7/8" Eye 10,000 lb General Duty 2-1/2" B-13 J-8 & J-9 Slipper Springs B-19 Pintle Hooks E-7 Slipper Springs B-19 Pintle Mounts E-6 Slipper Springs 10,000 lb Heavy Duty - 15,000 lb 3" B-16 Pipe Bows H-6 Slipper Springs 2,000 lb - 8,000 lb 1.75" & 2" Pipe Mount Swivel Jack D-9 Slipper Springs 3,500 lb - 8,000 lb 2" Powder Coated Box (Underbody, Tongue & Specialty) H-17 Slipper Springs 3/4" Eye (Dry) 10,000 lb General Duty 2-1/2" Power Jack D-11 Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" B-14 Primer G-6 Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2" B-13 B-11 Pins (Hitch, Linch & Snapper) Quick Links INDEX K-13 Identification Light Bars B-3 B-6 thru B-9 B-15 F-3 & J-8 Slipper Springs 9,000 lb 2" Quick Splices L-30 Smooth Shank Hitch Balls Races A-89 Snap Ring Swivel Jack Rack Post & Gearbox D-14 Snapper Pins J-9 RACK-EM Double Barrel Gate Lift Assist H-17 Spare Tire Carrier / Mount J-2 RACK'EM™ F-6 Specialty Ball Mounts Racks F-6 Specialty Box E-8 D-11 E-4 H-18 Ramp Gate Assemblies H-15 Specialty Lighting L-22 Ramp Springs H-16 Spindle Parts (Washers, Nuts & Cotter Pins) A-84 Ramps H-14 Spindles A-83 Spring and U-Bolt Kits B-18 Rapid Hitch Ball Mounts E-6 WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc. INDEX Spring Loaded Latches J-9 Tradesman Boxes H-18 Spring Seats A-87 Trailer Connectors L-28 Springs B-18 Trailer Dolly F-6 Springs and Accessories - AIR LIFT B-30 Transmission Fluid Springs for Ramps H-15 Trim Square Tube Swivel Jack D-10 Triple Axle Fenders & Fender Backs H-4 Square U-Bolts B-23 Triple Axle Hanger Kits B-8 Stabilizer Jack D-12 Triple Ball Mount E-4 Stake Components J-11 Truck Control Kit K-14 Stake Pocket Steps (Folding & Weld-On) Stop / Turn / Tail Lights G-3 H-8 & H-9 H-16 & J-10 Truck-Tack Boxes H-17 J-2 & J-7 Turn Signal Lights L-11 & L-19 L-2, L-10 & L-18 Two Speed Winches D-15 B-22 Straight Tongue Coupler D-2 U-Bolt Hardware Strap Hinges J-3 U-Bolt Kits B-18 U-Bolts B-20 Underbody Box H-17 Straps Suitcase Latch F-5 & H-19 J-9 Superwinch Electric Winches D-16 Utility Lights Suspension Hardware B-26 Vacuum / Hydraulic Brake System K-14 Tandem Axle Fenders & Fender Backs H-3 Vacuum Pump Kit K-14 Tandem Axle Hanger Kits B-4 Valspar Finishes G-6 Tarp Kits H-19 Valve Stems C-5 Vents H-8 Terminal Connectors L-30 thru L-31 L-12 & L-22 Terminal Pliers L-31 VHB Tape G-2 TexTrail Packaged Towing Products E-13 Warn Electric Winches D-16 TexTrail Value Finishes G-6 Warning & Specification Decals G-2 T-Handle Latches J-4 Water Caddy H-13 Water Cooler Rack H-13 Tie Bolts B-21 Tie Loops F-2 & J-7 Web Winder F-5 Tie Plates B-21 Wedge Caps H-5 Tipper Latch J-9 Weight Distribution Hitches E-8 Tire & Wheel Assemblies C-8 Wheel & Tire Assemblies C-8 Tires C-8 Wheel Bolts A-92 Tongue Box H-17 Wheel Chock D-12 & F-6 TORFLEX® 09 2,000 lb A-10 Wheel Covers C-6 TORFLEX® 10 3,500 lb A-16 Wheel Mounting Hardware A-91 TORFLEX® 11 6,000 lb A-33 Wheel Nets F-5 TORFLEX® 12 7,000 lb A-34 Wheel Nuts A-92 & C-5 TORFLEX® 12V 7,200 lb A-35 Wheel Simulators C-6 TORFLEX® 13 8,000 lb A-35 Wheel Studs A-92 TORFLEX® 13D 10,000 lb Heavy Duty A-69 Wheels C-7 TORFLEX® 13G 10,000 lb General Duty A-68 Winch Bar F-5 Torx® Head Self Tapping Floor Screws H-10 & J-10 Winch Ratchets F-5 Torx® Screw Bits & Holder H-10 & J-10 Winch Strap D-15 Towing Mirror J-2 Wire & Cable L-35 - L37 Tractor, Halogen & Tow Lights L-22 Wiring Harnesses L-28 INDEX WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc.