Download (ILOM) 3.0 Management Protocols Reference Guide

TABLE A-11
Properties for Sun_IndicatorLED (Continued)
Property
Data Type
Description
ILOM Value
EnabledState
uint16[]
Integer enumeration that indicates the enabled and
disabled states of an element. It can also indicate the
transitions between these requested states. For
example, Shutting Down (value=4) and Starting
(value=10) are transient states between enabled and
disabled. The following values apply:
• 0 (Unknown)
• 1 (Other)
• 2 (Enabled) - The element is or could be executing
commands, will process any queued commands, and
queues new requests.
• 3 (Disabled) - The element will not execute
commands and will drop any new requests
• 4 (Shutting Down) - The element is in the process of
going to a Disabled state.
• 5 (Not Applicable) - The element does not support
being enabled or disabled.
• 6 (Enabled but Offline) - The element might be
completing commands, and will drop any new
requests.
• 7 (Test) - The element is in a test state.
• 8 (Deferred) - The element might be completing
commands, but will queue any new requests.
• 9 (Quiesce) - The element is enabled but in a
restricted mode.
• 10 (Starting) - The element is in the process of going
to an Enabled state. New requests are queued.
• 11..32767 (DMTF Reserved)
• 32768..65539 (Vendor Reserved)
Appropriate
value.
Appendix A
Sun-Supported CIM Classes
189