Download 2015 Training Program Information and Application

2015 Training Program
Information and Application
2015 Training Program Information
Training Overview:
With our state-of-the-art training facility, Door Controls USA, Inc. is committed to the
future of the automatic door industry and door technicians. We offer a one-week training
class consisting of three days of Quick Start Level 1 Automatic Door Training, followed
by two days of AAADM Inspector Certification. In addition, we now offer Quick Start
Level 2 and Revolving Door Training classes. See below for more information.
All classes 8a – 5p Monday-Thursday. 12 noon release on Fridays.
Quick Start Level 1 – Automatic Door Training Program –
3 Day QS w/ 2 Day AAADM
- Basic electronics, sensors, controls and motor/gearbox
- Activation, safety and adjustments
- Troubleshooting tips, how to isolate the system
- Hands-on and problem simulation on actual test doors
- Covers all of the most common brands in our industry
- Get AAADM Certified to the ANSI A156.10, A156.19 and A156.38
Quick Start Level 2 – Beyond the Basics – 3 Day QS 2 w/ 2 Day AAADM
- Newer advanced microprocessor controls and how to program them
- Covers Stanley MC521, Dorma ED700, Record 8100, GT 1175, and others
- Class may be customized per subject based on student request
- Integrated systems: modules and sensors
- Hands-on adjustments, problem simulation, and troubleshooting tips
- Get AAADM Certified to the ANSI A156.10, A156.19 and A156.38
Revolver Classes – 3 Day Revolver w/ 2 Day AAADM
- Getting started with revolving doors
- Troubleshooting and system isolation
- PLC’s, frequency drives, controls and motor gear/box
- Get AAADM certified to the ANSI A156.27
Tuition Fees:
Quick Start -- $475
AAADM -- $250
Quick Start Level 2 -- $600
AAADM -- $250
Revolver -- $900
AAADM Revolver -- $250
For More Information Please Contact: [email protected]
Ben Calhoun / Training Director / 800-437-3667 ext. 166 / [email protected]
321 VZ County Road 4500  Ben Wheeler  Texas  75754  Phone 800-437-3667  Fax 903-833-1020
www.doorcontrolsUSA.com
***This form must be submitted no later than 2 weeks prior to scheduled class date***
**Class size will be limited to 20 students and will be filled according to date of received application**
*Please confirm your enrollment with our training department before making travel arrangements*
2015 APPLICATION FOR ALLTRAINING PROGRAMS
PLEASE PRINT LEGIBLY AND COMPLETE ALL SECTIONS
NAME
CUSTOMER #:
FIRST NAME
LAST NAME
APPLICANT’S EMPLOYER
JOB POSITION
STREET ADDRESS (NOT A PO BOX)
CITY
BUSINESS PHONE
STATE
EMAIL ADDRESS
ZIP
OWNER / PRESIDENT’S NAME
HOW MANY SERVICE VANS?
HOW MANY SERVICE TECHS?
HOW LONG HAVE YOU WORKED ON AUTOMATIC DOORS?
ARE YOU AAADM CERTIFIED?
WHERE DO YOU PURCHASE AUTOMATIC DOOR PARTS?
WHO IS YOUR PARTS BUYER?
DO YOU SERVICE MANUAL DOORS?
WHERE DO YOU PURCHASE HARDWARE?
IS YOUR COMPANY A DISTRIBUTOR OF ANY BRAND?
DO YOU SERVICE REVOLVING DOORS?
2015 TRAINING SCHEDULE
PLEASE CIRCLE THE DATE AND CLASS THAT YOU PLAN TO ATTEND
Quick Start and AAADM Certification
Jan 12-16
Feb 2-6
Mar 2-6
Apr 6-10
May 4-8
Jun 1-5
Jul 13-17
Aug 3-7
Sep 14-18
Oct 5-9
Nov 2-6
Dec 7-11
Quick Start Level 2 and AAADM Certification
Mar 24-26
Jun 23-25
Aug 31-Sep 4
Nov 30-Dec 4
Revolver and AAADM Revolver Certification
Jun 15-19
Jul 20-24
Aug 17-21
Sep 21-25
Oct 19-23
Nov 16-20
Dec 14-18
Fax Application to: 903-833-1020
Or, Email to: [email protected]
Ben Calhoun / Training Director / 800-437-3667 ext. 166 / [email protected]
321 VZ County Road 4500  Ben Wheeler  Texas  75754  Phone 800-437-3667  Fax 903-833-1020
www.doorcontrolsUSA.com
Training Fees – (Use this form only for Quick Start & Revolver Payments)
(AAADM fee payments are to be made at the website listed below)
Quick Start Level 1 - $475
Quick Start Level 2 - $600
Revolver - $900
Applicants should submit their completed training application along with check made
payable to Door Controls USA, Inc. or complete the Credit Card Payment form below.
The Quick Start class and AAADM fees are separate payments.
AAADM - $250 The fee for AAADM Inspector and AAADM Revolver Inspector is
$250 per person, payable to AAADM via PayPal or check. Applicants should submit
their completed AAADM License Agreement along with their payment or receipt to
Door Controls USA, Inc. for processing. To pay by credit card, visit the AAADM PayPal
link and write the receipt number on your application. AAADM PayPal:
http://www.aaadm.com/paypal/certification.htm
Please send all completed paperwork to Door Controls USA for processing.
CREDIT CARD INFORMATION
Students Name:____________________________________________________
CUSTOMER NUMBER: ____________ Company Name:___________________
INVOICE NUMBER: _________________________________________________
AMOUNT BEING CHARGED: _________________________________________
CREDIT CARD NUMBER: ____________________________________________
EXP DATE: __________ SEC CODE: _________________
NAME ON CARD: ___________________________________________________
CREDIT CARD BILLING ADDRESS: ____________________________________
CITY: ________________________ STATE: _________ ZIP: ________________
PHONE NUMBER: __________________________________________________
CONFIRMATION REQUESTED:
EMAIL
FAX
NO
FAX NUMBER: _____________________________________________________
EMAIL: (PREFERRED) _______________________________________________
ATTN: ____________________________________________________________
TAKEN BY: ________________________________________________________
321 VZ County Road 4500  Ben Wheeler  Texas  75754  Phone 800-437-3667  Fax 903-833-1020
www.doorcontrolsUSA.com
APPLICATION FOR CERTIFICATION AS AN AAADM INSPECTOR
PLEASE PRINT LEGIBLY
AND
COMPLETE ALL SECTIONS.
Name of Individual Applicant:
_____________________________________
E-mail Address:
_____________________________________
Home Address: [Street Address, not P. O. Box]
_____________________________________
City, State, and Postal Code: Zip
_____________________________________
Applicant's Employer Name:
_____________________________________
Business Address: [Street Address, not P. O. Box]
_____________________________________
City, State, and Postal Code
_____________________________________
Telephone Number:
_____________________________________
SEND DIPLOMA AND ID CARD TO
Service
Applicant Occupation:
HOME ADDRESS
BUSINESS ADDRESS (CHECK ONLY ONE.)
Sales
Install
Service/Install
Other
SEND DIPLOMA AND ID CARD TO HOME ADDRESS
-
BUSINESS ADDRESS (CHECK ONLY ONE.)
How long has applicant worked in the automatic pedestrian door industry immediately preceding date of
application?: __________.
In what capacity? _______________________________________.
Applicant Has Taken the Factory Training Course Given by the Following AAADM Member: (name of company
and dates of factory course): ________________________________________.
Date and Location of AAADM Inspector Training Course
Date of Class
AAADM Member Company
Providing Training
City/State
Conditions for Certification:
1. As a prerequisite to taking the AAADM Certified Inspector Training Program, a candidate must be an individual who has a)
worked in the automatic pedestrian door industry for 6 months immediately preceding the application for an AAADM
training course, or b) worked in the automatic pedestrian door industry for at least 90 days immediately preceding the
application for an AAADM training course and has taken the factory training course of an AAADM member. An individual
who has worked in the automatic pedestrian door industry is a person who is employed by a company in the industry that
sells, services or installs automatic pedestrian doors as its primary business.
2. The individual candidate must complete and sign an application for the training program and return it to the AAADM
Certified Instructor prior to the class, along with (a) a check for the course fee, and (b) a License Agreement signed by the
candidate and his/her employer. The trainer will review the application for compliance with the prerequisites and will
coordinate scheduling of training sessions with the AAADM members giving courses.
3. If a candidate appears not to meet the qualifications, AAADM headquarters will notify the candidate of this fact, and return
the course fee to the candidate. The candidate will have the opportunity to give further information regarding his/her
qualifications, and if the matter is disputed, it shall be referred to the AAADM Certification Committee for further handling.
Applicant Name: _________________________ Applicant Signature: ______________________ Date: _______
AAADM Member Coordinator Name: __________________________ Signature: _________________________
Along with this application, applicant must submit a completed License Agreement signed by the
applicant and his/her employer and a check payable to AAADM in the amount of $250.00 OR If you are paying by credit card
please provide the card holder name below and click on link that follows:
Card Holder Name: __________________
http://www.aaadm.com/paypal/certification.htm
Do not provide your credit card information to the association office. All credit card payments must be made online through
PayPal. You will receive a receipt for your payment via e-mail from PayPal.
AAADM, 1300 SUMNER AVENUE, CLEVELAND, OH 44115-2851
TEL: 216/241-7333, FAX: 216/241-0105, E-MAIL: [email protected]
Jan 2015
LICENSE AGREEMENT
Company:
___________________________________
Individual:
___________________________________
This License Agreement is entered into this ____ day of _______________, 20___, by and
between the American Association of Automatic Door Manufacturers ("AAADM"), and the
above-named Company and Individual.
RECITALS:
A.
AAADM has established a training and certification program for inspectors of
automatic pedestrian doors.
B.
The Individual has applied for certification as an AAADM certified inspector, and
has or will be taking the AAADM certification training program.
C.
When the Individual successfully completes the AAADM training program, the
Individual and Company wish to be able to use the AAADM name and logo.
NOW THEREFORE, in consideration of these mutual agreements, the parties agree as
follows:
1. Conditions for Inspector Certification. The Company and Individual represent and
warrant that the Individual has:
i. worked in the automatic pedestrian door industry for 6 months
immediately preceding the application for an AAADM training course,
or
ii. worked in the automatic pedestrian door industry for at least 90 days
immediately preceding the application for an AAADM training course
and has taken the factory training course of an AAADM member.
An individual who has worked in the automatic pedestrian door
industry is one who is employed by a company in the industry that
sells, services or installs automatic pedestrian doors as its primary
business.
2. Certificates. If and when an Individual successfully completes the AAADM training
course, including attending all training sessions and passing all examinations,
AAADM will issue that Individual a certificate of successful course completion
("Inspector Certificate"), and will issue the Company a certificate that the Company
has an AAADM certified inspector on staff ("Company Certificate").
3. Use of AAADM Name and Logo by Individual. When an Individual receives his/her
Inspector Certificate, that Individual shall be licensed and permitted to do the
following, as long as his/her Certificate remains in force and he/she complies with all
of the provisions of this Agreement:
a. display his/her Inspector Certificate and Inspector Identification Card issued by
AAADM;
Jan 2015
b. state that he/she is an AAADM Certified Inspector for automatic pedestrian
doors;
c. use and reproduce the AAADM Inspection Forms for use only on inspections
conducted by him/her in compliance with the procedures set forth in the
AAADM training course;
d. use the AAADM name and logo, in the form and manner from time to time
approved by AAADM, solely to advertise that he/she is an AAADM certified
inspector.
Each Inspector Certificate shall expire one year after being issued or one year
after any revision to the ANSI/BHMA A156.10, A156.19, or A156.38
standards, based on the nature of the change and at the discretion of AAADM.
In the event that the ANSI Standard is revised, the Individual shall retake and
pass a new examination (and training course, if required) within one year after
the effective date of the ANSI revision. If this is not done, the Inspector
Certificate will expire and this Agreement shall terminate for such Individual.
4. Use of AAADM Name and Logo by Company. When the Company receives its
Company Certificate, the Company shall be licensed and permitted to do the
following, as long as its Company Certificate remains in force and the Company
complies with all of the provisions of this Agreement:
a. display the Company Certificate,
b. advertise that it has an AAADM certified inspector on staff,
c. use the AAADM name and logo, in the form and manner from time to time
approved by AAADM, solely to advertise that it has an AAADM certified
inspector on staff.
If at any time the Company does not employ an AAADM certified inspector, with a
current certificate, the Company Certificate and this Agreement shall terminate as to
the Company.
5. Conditions. The Company and each Individual must comply with the following:
a. Each Individual shall promptly notify AAADM at any time that he or she
changes employment.
b. The Company and Individual shall certify to AAADM every year that they are
in compliance with this Agreement and shall register annually with AAADM.
Company and individual certification will expire annually unless registration is
completed.
c. The certified Individual (or other AAADM certified inspector) shall personally
conduct all inspections in which an AAADM Inspection Form is used, and
shall not permit any non-certified person to use, complete or sign such forms.
d. The Company shall keep a record of all installations inspected by its AAADM
certified inspector.
e. The Company shall have an ongoing program for the performance of regular
AAADM inspections.
6. Limitations. Neither Individual nor Company shall obtain any rights in the AAADM
name and logo, and shall not use them except as expressly authorized in this
Agreement. Without limitation, neither Company nor Individual shall represent or
imply that he, she or it represents, is affiliated with, or is approved or endorsed by
AAADM, or that any inspection or service performed by it, him or her is performed,
endorsed or approved by AAADM. From time to time, at the request of AAADM,
Jan 2015
Company and Individual shall provide AAADM with copies of all promotional and
other material using the AAADM name and/or logo for its review. This Agreement
and the Certificates are not assignable by Company or Individual. This Agreement
will be governed by Ohio law, and the parties consent to jurisdiction and venue in any
court in Cleveland, Ohio.
7. Termination. In the event that there is any breach of this Agreement, AAADM may
terminate this Agreement. This Agreement will also automatically terminate under
certain circumstances as provided in paragraphs 3, 4, and 5. On termination, the
Individual and/or the Company (as the case may be) will immediately cease all usage
of the AAADM name and logo, will destroy all materials using the AAADM name or
logo, and will certify to AAADM that it has done so.
8. Indemnity. The Company and Individual indemnify and hold AAADM harmless from
all claims, losses, costs and expenses arising out of or relating to the inspector training
and certification program, the use of any information or materials obtained from
AAADM (including but not limited to any errors or omissions), and all operations of
the Individual and the Company, including but not limited to any installation, service,
or inspection of doors.
IN WITNESS WHEREOF, the parties have executed this Agreement as of the above date.
AMERICAN ASSOCIATION OF AUTOMATIC
DOOR MANUFACTURERS
__________________________________________
R. CHRISTOPHER JOHNSON, Executive Director
__________________________________________
Company Name
__________________________________________
Signature of Company Officer
__________________________________________
Signature of Individual (Inspector)
Jan 2015
APPLICATION FOR CERTIFICATION AS AN AAADM REVOLVING DOOR INSPECTOR
PLEASE PRINT LEGIBLY
Name of Individual Applicant:
AND
COMPLETE ALL SECTIONS.
_____________________________________
E-mail Address:
_____________________________________
Home Address: [Street Address, not P. O. Box]
City, State, and Postal Code: Zip
Applicant's Employer Name:
Business Address: [Street Address, not P. O. Box]
City, State, and Postal Code
Telephone Number:
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
SEND DIPLOMA AND ID CARD TO
Applicant Occupation:
Service
HOME ADDRESS
BUSINESS ADDRESS (CHECK ONLY ONE.)
Sales
Install
Service/Install
Other
SEND DIPLOMA AND ID CARD TO HOME ADDRESS
BUSINESS ADDRESS (CHECK ONLY ONE.)
How long has applicant worked in the revolving pedestrian door industry immediately preceding date of
application?: __________In what capacity? _______________________________________
Applicant Has Taken the Factory Training Course Given by the Following AAADM Member: (name of
company and dates of factory course): ________________________________________
Date and Location of AAADM Revolving Door Inspector Training Course
Date of Class
AAADM Member Company
City/State
Conditions for Certification:
1.
As a prerequisite to taking the AAADM Certified Revolving Door Inspector Training Program, a candidate must be an
individual who has worked in the revolving pedestrian door industry for 6 months immediately preceding the application,
or b) worked in the revolving pedestrian door industry for at least 90 days immediately preceding the application and has
taken the factory training course of an AAADM member. An individual who has worked in the revolving pedestrian door
industry is one who is employed by a company in the industry that sells, services, or installs automatic pedestrian doors or
revolving pedestrian doors as its primary business.
2.
The individual candidate must complete and sign an application for the training program and return it to the AAADM
Certified Instructor prior to the class, along with (a) a check for the course fee, and (b) a License Agreement signed by the
candidate and his/her employer. The trainer will review the application for compliance with the prerequisites and will
coordinate scheduling of training sessions with the AAADM members giving courses.
3.
If a candidate appears not to meet the qualifications, AAADM headquarters will notify the candidate of this fact, and
return the course fee to the candidate. The candidate will have the opportunity to give further information regarding
his/her qualifications, and if the matter is disputed, it shall be referred to the AAADM Certification Committee for further
handling.
Applicant Name:__________________________ Applicant Signature: ______________________ Date: _______
AAADM Member Coordinator Name: __________________________ Signature: _________________________
[PLEASE PRINT]
Along with this application, applicant must submit a completed License Agreement signed by the applicant and his/her
employer and a check payable to AAADM for the training course fee of $250.00 OR.
If you are paying by credit card please provide the card holder name below and click on link that follows:
Card Holder Name: __________________
http://www.aaadm.com/paypal/certification.htm
Do not provide your credit card information to the association office. All credit card payments must be made
online. You will receive a receipt for your payment via e-mail.
AAADM, 1300 SUMNER AVENUE, CLEVELAND, OH 44115-2851
PHN: 216/241-7333, FAX: 216/241-0105, E-MAIL: [email protected]
5/2015
Tab 1-10
LICENSE AGREEMENT
Company:
___________________________________
Individual:
___________________________________
This License Agreement is entered into this ____ day of _______________, 20___, by and
between the American Association of Automatic Door Manufacturers ("AAADM"), and the
above-named Company and Individual.
RECITALS:
A.
AAADM has established a training and certification program for inspectors of
revolving pedestrian doors.
B.
The Individual has applied for certification as an AAADM certified revolving
door inspector, and has or will be taking the AAADM certification training
program.
C.
When the Individual successfully completes the AAADM training program, the
Individual and Company wish to be able to use the AAADM name and logo.
NOW THEREFORE, in consideration of these mutual agreements, the parties agree as
follows:
1. Conditions for Inspector Certification. The Company and Individual represent and
warrant that the Individual has:
i. worked in the revolving pedestrian door industry for 6 months
immediately preceding the application for an AAADM training course,
or
ii. worked in the revolving pedestrian door industry for at least 90 days
immediately preceding the application for an AAADM training course
and has taken the factory training course of an AAADM member.
An individual who has worked in the revolving pedestrian door
industry is one who is employed by a company in the industry that
sells, services, or installs automatic pedestrian doors or revolving
pedestrian doors as its primary business.
2. Certificates. If and when an Individual successfully completes the AAADM training
course, including attending all training sessions and passing all examinations,
AAADM will issue that Individual a certificate of successful course completion
("Inspector Certificate"), and will issue the Company a certificate that the Company
has an AAADM certified inspector on staff ("Company Certificate").
5/2015
3. Use of AAADM Name and Logo by Individual. When an Individual receives his/her
Inspector Certificate, that Individual shall be licensed and permitted to do the
following, as long as his/her Certificate remains in force and he/she complies with all
of the provisions of this Agreement:
a. display his/her Inspector Certificate and Inspector Identification Card issued by
AAADM;
Tab 1-11
b. state that he/she is an AAADM Certified Inspector for revolving pedestrian
doors;
c. use and reproduce the AAADM Inspection Forms for use only on inspections
conducted by him/her in compliance with the procedures set forth in the
AAADM training course;
d. use the AAADM name and logo, in the form and manner from time to time
approved by AAADM, solely to advertise that he/she is an AAADM certified
inspector.
Each Inspector Certificate shall expire one year after being issued or one year
after any revision to the ANSI/BHMA A156.27 standards, based on the nature
of the change and at the discretion of AAADM. In the event that the ANSI
Standard is revised, the Individual shall retake and pass a new examination
(and training course, if required) within one year after the effective date of the
ANSI revision. If this is not done, the Inspector Certificate will expire and this
Agreement shall terminate for such Individual.
4. Use of AAADM Name and Logo by Company. When the Company receives its
Company Certificate, the Company shall be licensed and permitted to do the
following, as long as its Company Certificate remains in force and the Company
complies with all of the provisions of this Agreement:
a. display the Company Certificate,
b. advertise that it has an AAADM certified inspector on staff,
c. use the AAADM name and logo, in the form and manner from time to time
approved by AAADM, solely to advertise that it has an AAADM certified
inspector on staff.
If at any time the Company does not employ an AAADM certified inspector, with a
current certificate, the Company Certificate and this Agreement shall terminate as to
the Company.
5. Conditions. The Company and each Individual must comply with the following:
a. Each Individual shall promptly notify AAADM at any time that he or she
changes employment.
b. The Company and Individual shall certify to AAADM every year that they are
in compliance with this Agreement and shall register annually with AAADM.
Company and individual certification will expire annually unless registration is
completed.
c. The certified Individual (or other AAADM certified inspector) shall personally
conduct all inspections in which an AAADM Inspection Form is used, and
shall not permit any non-certified person to use, complete or sign such forms.
d. The Company shall keep a record of all installations inspected by its AAADM
certified inspector.
e. The Company shall have an ongoing program for the performance of regular
AAADM inspections.
6. Limitations. Neither Individual nor Company shall obtain any rights in the AAADM
name and logo, and shall not use them except as expressly authorized in this
Agreement. Without limitation, neither Company nor Individual shall represent or
imply that he, she or it represents, is affiliated with, or is approved or endorsed by
AAADM, or that any inspection or service performed by it, him or her is performed,
endorsed or approved by AAADM. From time to time, at the request of AAADM,
5/2015
Tab 1-12
Company and Individual shall provide AAADM with copies of all promotional and
other material using the AAADM name and/or logo for its review. This Agreement
and the Certificates are not assignable by Company or Individual. This Agreement
will be governed by Ohio law, and the parties consent to jurisdiction and venue in any
court in Cleveland, Ohio.
7. Termination. In the event that there is any breach of this Agreement, AAADM may
terminate this Agreement. This Agreement will also automatically terminate under
certain circumstances as provided in paragraphs 3, 4, and 5. On termination, the
Individual and/or the Company (as the case may be) will immediately cease all usage
of the AAADM name and logo, will destroy all materials using the AAADM name or
logo, and will certify to AAADM that it has done so.
8. Indemnity. The Company and Individual indemnify and hold AAADM harmless from
all claims, losses, costs and expenses arising out of or relating to the inspector training
and certification program, the use of any information or materials obtained from
AAADM (including but not limited to any errors or omissions), and all operations of
the Individual and the Company, including but not limited to any installation, service,
or inspection of doors.
IN WITNESS WHEREOF, the parties have executed this Agreement as of the above date.
AMERICAN ASSOCIATION OF AUTOMATIC
DOOR MANUFACTURERS
__________________________________________
R. Christopher Johnson, Executive Director
__________________________________________
Company Name
__________________________________________
Signature of Company Officer
__________________________________________
Signature of Individual (Inspector)
5/2015
Tab 1-13
Lodging Suggestions

DCS Inn – .5 miles
121 PR 8773
Ben Wheeler, TX 75754
(903) 833-5815 (This is a Door Controls USA, Inc. Property*)
$65.00 per night

Low Places – 1.5 miles
2189 VZ County Road 4501
Ben Wheeler, TX 75754
(903) 833-5815 (This is a Door Controls USA, Inc. Property*)
$85.00 per night
*For more information regarding lodging at one of the Door Controls USA, Inc.
Properties, please contact: [email protected] or 800-437-3667

Quality Inn – 15 minutes
2406 North Trade Days Blvd (Hwy 19)
Canton, TX 75103
(903) 567-0909 (Ask for Door Controls USA Rate) (free breakfast, WIFI, pool, spa)
$64.99 per night (Price may Increase during First Monday Trade Day: $80 to $120)
If making reservations online, please call to confirm.

Super 8 Motel – 15 minutes
17350 I-20
Canton, TX 75103
(903) 567-6567 (Ask for Door Controls USA Rate)
$59.00 per night (Price may Increase during First Monday Trade Day: $70 to $110)
If making reservations online, please call to confirm.

Holiday Inn Express Hotel & Suites – 28 minutes
1119 E Tyler St
Athens, TX 75751
(903) 675-2500 (Ask for Door Controls USA Rate) (free breakfast)
$77.00 per night - If making reservations online, please call to confirm.

La Quinta Inn and Suites – 30 minutes
204 West Centennial Blvd
Lindale, TX 75771
(903) 882-1600 (Ask for Door Controls USA Rate)
10% off bar rate - If making reservations online, please call to confirm.

Hampton Inn – 30 minutes
3505 South Main
Lindale, TX 75771
(903) 882-1002 (Ask for Door Controls USA Rate)
$89.00 per night - If making reservations online, please call to confirm.
Notes
Trip to:
Door Controls USA Inc
321 Vz County Road 4500
Ben Wheeler, TX 75754
(903) 833-5815
From Dallas-Fort Worth International Airport (DFW) to
Door Controls USA, Inc.
93.30 miles
1 hour 41 minutes
Dallas-Fort Worth International Airport (DFW)
3200 E Airfield Dr, Dfw Airport, TX 75261
(972) 973-8888
Miles Per
Section
Miles Driven
1. Start out going north on E Airfield Dr toward E 31st St.
Go 0.1 Mi
0.1 mi
2. Make a U-turn at E 31st St onto E Airfield Dr.
Go 0.5 Mi
0.7 mi
Go 0.9 Mi
1.5 mi
Go 0.6 Mi
2.2 mi
5. Merge onto TX-161 S via the ramp on the left.
Go 0.9 Mi
3.0 mi
6. Merge onto TX-183 E toward Dallas.
Go 9.9 Mi
13.0 mi
7. TX-183 E becomes I-35E S / US-77 S.
Go 5.1 Mi
18.1 mi
8. Merge onto I-30 E via EXIT 428A on the left toward Texarkana.
Go 8.1 Mi
26.2 mi
9. Keep right to take US-80 E via EXIT 53B toward Terrell.
Go 19.1 Mi
45.3 mi
10. Take TX-557-SPUR E toward I-20 E / Shreveport.
Go 4.4 Mi
49.7 mi
If you reach E 30th St you've gone about 0.1 miles too far
3. Turn left onto W Walnut Hill Ln.
If you are on S Airfield Dr and reach S 26th Ave you've gone about 0.7 miles too far
4. Turn slight right onto TX-161.
TX-161 is just past Orion Dr
Calvary Church is on the corner
If you reach Esters Rd you've gone about 0.2 miles too far
11. Merge onto I-20 E via the exit on the left toward Shreveport.
Go 37.5 Mi
87.2 mi
12. Take EXIT 537 toward FM-773 / Van / FM-16 / Ben Wheeler.
Go 0.2 Mi
87.3 mi
13. Stay straight to go onto I-20 E.
Go 0.2 Mi
87.6 mi
14. Take the 1st right onto FM-773.
Go 5.2 Mi
92.8 mi
Go 0.4 Mi
93.2 mi
Go 0.09 Mi
93.3 mi
If you are on I-20 E and reach FM-16 you've gone about 0.3 miles too far
15. Turn left onto TX-64.
TX-64 is 0.5 miles past Oates Dr
If you reach FM-279 you've gone about 0.2 miles too far
16. Take the 2nd left onto VZ County Road 4500.
VZ County Road 4500 is 0.1 miles past VZ County Road 4501
If you reach FM-858 you've gone a little too far
17. 321 VZ COUNTY ROAD 4500 is on the right.
93.3 mi
If you reach VZ County Road 4501 you've gone about 0.2 miles too far
Door Controls USA Inc
321 Vz County Road 4500, Ben Wheeler, TX 75754
(903) 833-5815
93.3 mi
93.3 mi
Total Travel Estimate: 93.30 miles - about 1 hour 41 minutes
10mi
20km
©2011 MapQuest - Portions ©2011 , Intermap | Terms
Notes
Trip to:
Door Controls USA, Inc
321 Vz County Road 4500
Ben Wheeler, TX 75754
(903) 833-5815
From Dallas Love Field (DAL) to
Door Controls USA, Inc.
80.10 miles
1 hour 29 minutes
Dallas Love Field (DAL)
8008 Cedar Springs Rd, Dallas, TX 75235
(214) 670-6080
Miles Per
Section
Miles
Driven
1. Start out going southeast on Cedar Springs Rd / Herb Kelleher Way
toward Aviation Pl. Continue to follow Cedar Springs Rd.
Go 1.8 Mi
1.8 mi
2. Turn left onto Inwood Rd.
Go 0.4 Mi
2.2 mi
Go 2.7 Mi
4.8 mi
Go 0.6 Mi
5.4 mi
5. Merge onto I-45 S via the ramp on the left toward I-30.
Go 0.7 Mi
6.2 mi
6. Merge onto I-30 E / US-67 N via EXIT 284A.
Go 6.8 Mi
13.0 mi
7. Keep right to take US-80 E via EXIT 53B toward Terrell.
Go 19.1 Mi
32.1 mi
8. Take TX-557-SPUR E toward I-20 E / Shreveport.
Go 4.4 Mi
36.4 mi
9. Merge onto I-20 E via the exit on the left toward Shreveport.
Go 37.5 Mi
74.0 mi
10. Take EXIT 537 toward FM-773 / Van / FM-16 / Ben Wheeler.
Go 0.2 Mi
74.1 mi
Inwood Rd is 0.4 miles past Manor Way
Maple Lawn Elementary School is on the corner
If you reach Cherrywood Ave you've gone a little too far
3. Take the 3rd right onto Lemmon Ave.
Lemmon Ave is just past Rawlins St
Cvs Pharmacy is on the right
If you reach Lemmon Wood Plz you've gone about 0.1 miles too far
4. Turn right onto N Central Expy.
N Central Expy is 0.1 miles past Howell St
If you reach N Washington Ave you've gone about 0.1 miles too far
11. Stay straight to go onto I-20 E.
Go 0.2 Mi
74.4 mi
12. Take the 1st right onto FM-773.
Go 5.2 Mi
79.6 mi
Go 0.4 Mi
80.0 mi
Go 0.09 Mi
80.1 mi
If you are on I-20 E and reach FM-16 you've gone about 0.3 miles too far
13. Turn left onto TX-64.
TX-64 is 0.5 miles past Oates Dr
If you reach FM-279 you've gone about 0.2 miles too far
14. Take the 2nd left onto VZ County Road 4500.
VZ County Road 4500 is 0.1 miles past VZ County Road 4501
If you reach FM-858 you've gone a little too far
15. 321 VZ COUNTY ROAD 4500 is on the right.
80.1 mi
If you reach VZ County Road 4501 you've gone about 0.2 miles too far
Door Control Service Inc
321 Vz County Road 4500, Ben Wheeler, TX 75754
(903) 833-5815
80.1 mi
80.1 mi
Total Travel Estimate: 80.10 miles - about 1 hour 29 minutes
10mi
20km
©2011 MapQuest | Terms