Download SAFETY RULES

TABLE OF CONTENTS
PARTS AND SERIVCE MANUAL #544
(N1291)
REX MODEL SP-600D AND SP-600PD VIBRATORY ROLLER
DESCRIPTION
PAGE
Foreword
Safety Alert Symbol
Safety Signal Words
Safety Rules
Specifications
Reworks Standard Warranty
Delivery and Acceptance Report
Instructions For Ordering Parts
Material Lost Or Damaged In Transit
Design Change Disclaimer
Warranty Disclaimer
1
2
2
3
5
10
11
11
11
• 11
11
DECALS
Instruction and Name Decals 12
Location of Instruction and Name Decals - (SP600D ONLY) 14
Location of Instruction and Name Decals - (SP600PD ONLY)16
Lubrication And Maintenance Chart
18
FRONT FRAME
Roll Frame - (SP600D ONLY) Roll Frame - (SP600PD ONLY) Leveling Blade Option (600PD ONLY) Leveling Blade Cylinder (600PD ONLY) Vibratory Drum Assembly (SP600D ONLY) Vibratory Drum Assembly (SP600PD ONLY) Drum Drive Gear Case Assembly Pneumatic Vibration Isolators
Vib Meter Pick-Up Assembly (SP-600D ONLY} Articulating Joint Assembly 20
21
22
28
30
34
40
43
44
46
MAIN FRAME
Frame And Platform Assembly Center Console Assembly Frequency Meter Assembly Side Console And Controls Assembly Back-Up Alarm Assembly Back-Up Alarm Fenders And Ladders Radiator, Shroud And Covers Operator's Seat Quadrastat Control Propel Control Cable
48
50
52
54
56
58
60
62
64
66
68
TABLE OF CONTENTS
PARTS AND SERIVCE MANUAL #544
(N1291)
REX MODEL SP-600D AND SP-600PD VIBRATORY ROLLER
DESCRIPTION
PAGE
HYDRAULICS
70
Pump And Motor Mounting 72
Leveling Blade Option - (SP-600PD ONLY 74
Vibratory System 76
Oil Cooler
78
Vibratory Pump
80
Vibratory Motor 82
Steering System
84
Power Steering Pump 85
Steering Unit
86
Hydraulic Cylinder, Power Steering 88
Steering Cylinder Mounting
90
Ground Drive System 93
Mounting Block - Manifold Assembly 94
Hydraulic Disc Brake
95
Hydraulic Oil Tank Ports 96
Brake System
98
Brake Valve 100
Traction Motor 101
Roll Drive Motor
102
Traction Pump Hydrostatic Transmission, Axle, Drum Brakes and Mounting 104
106
Hydraulic Tank Assembly POWER UNIT
Engine
Exhaust Assembly Air Cleaner Assembly Fuel Tank Assembly Drive Train Assembly
AXLE
Differential
Wheels and Tires
ELECTRICAL
Wiring Diagram
Battery
OPTIONAL EQUIPMENT
ROPS Assembly
108
110
111
112
113
114
116
118
122
124
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FOREWORD
THANK YOU...for your recent purchase of a new REX Model SP-600D
and/or SP-600PD Vibratory Roller with Drum Drive.
Your SATISFACTION is our aim in making these quality products.
Designed specifically for high density soil compaction, your REX Model
SP-600D and/or SP-600PD features a drum drive with pneumatic isolators,
(i.e. keep vibratory forces confined to the drum and not the machine). The
SP-600D has a REXWORKS patented vibration meter that indicates to the
operator which frequency setting gives the best compaction.
Both machines feature a 110 HP Turbo-Charged, John Deere Model
4039T Engine.
New features include Single Lever Control, Multi-Adjustable Seat
w/suspension, Non-linear Propel Control Throttle Lever, Isolated Platform,
Fail Safe Disc Brakes and overall improved machine reliability.
All major components such as engine, transmission, axles, differential and
driveline units are widely accepted in the construction field.
REXWORKS INC. feels justified in being as proud of the new REX Model
SP-600D and/or SP-600PD Vibratory Roller as we know you shall be. In
this Service Manual will be found a listing of those items normally requiring
your attention in the operation and servicing of your machines.
Parts and service bulletins, along with REX TIMELY RECORDS UPDATES,
"REXTRU" flyers, provide rapid response to Distributor/Dealer parts and
service personnel.
Your REX Dealer is determined to serve your needs efficiently with
Personnel, Facilities, Replacement Parts and/or Service Guidance.
We look forward to the continuation of a mutually beneficial business
association for many years to come.
544-1
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
(N1291)
SAFETY ALERT SYMBOL
A
The above pictorial Safety Alert Symbol denotes Important Safety Information. The
Symbol is used in conjunction with the following Safety Signal Words that alert a person
to existence and relative degree of Safety Hazard.
SAFETY SIGNAL WORDS
ACAUTION
The Signal Word "CAUTION" denotes a potentially hazardous situation to a person
which may result in "Personal Injury" if recommended precautions are not taken.
WARNING
The Signal Word 'WARNING" denotes a potentially hazardous situation to a
person which may result in "Serious Injury or Death" if recommended precautions
are not taken.
A DANGER
The Signal Word "DANGER" denotes an extreme intrinsic hazardous situation to a
person which would result in high probability of "Death or Irreparable Injury" if
recommended precautions are not taken.
REX Model SP-600D and SP-600PD Vibratory Roller (5;lver Series)
544-3
(N1291)
SAFETY RULES
IMPORTANT! Please read the entire Operator's Manual for your REX Model SP600D
VIBRATORY ROLLER before Startup. Considerable time and effort have been invested
in making the REX Model SP-600D and/or SP-600PD safe machines.
Safety, based on years of experience and technical skill, has been built into these high
quality products. Your safety and the safety of those around you depends upon you
using care and good judgement in the operation and maintenance of these high quality
products. It is up to you to follow the best safety practices. Know the positions and
functions of all controls before attempting to operate. Only a qualified operator(s)
should be allowed to use/operate the REX Model SP-600D and/or SP-600PD
VIBRATORY ROLLERS.
We urge you to use protective devices. Use caution when working on or around
moving parts. Do not open hydraulic lines or components under pressure. Always use
the safety belt when provided with cab options. Keep safety gloves readily available.
IMPORTANT! HAVE AN OPERABLE FIRE EXTINGUISHER AT HAND AT ALL
TIMES.
,
All equipment has limitations. Understand the speed, braking, steering, stability and
other characteristics of the machine in a safe area before starting to work. The following
are some prescribed SAFETY RULES that are applicable to this equipment and can be
incorporated easily into your RULES FOR SAFETY: Please review them.
Avoid loose clothing, particularly cuffs and scarfs.
Know what safety equipment is required to use this machine. A hard hat,
safety glasses, reflector type vest and respirators are some of the types of
equipment you may need.
Know all hand signals that may be used and who is responsible for
signaling.
If you are roading the machine, know what warnings must be placed on
the machine and if you will need an escort. -
Warn all personnel who may be servicing or in the path of the machine.
Correct and/or report any apparent machine defects.
Check to see that all guards, etc. are secure and in place.
Note any hazards or obstructions that may be encountered such as ditches, overhead wires, blocks, etc. and take necessary precautions.
Keep deck, steps and floor clean so that they do not become cluttered or
slippery. Keep steps and grab handles free of oil and grease.
Insure proper ventilation when starting in an enclosed area.
Cont.
544-4
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
SAFETY RULES -- (Continued)
Be particularly careful if this is not the machine you would normally operate.
Never leave machine unattended with engine running. However, if you must, be sure
that you set the emergency stop or parking brake.
Parking in a clear authorized area and set parking brake before dismounting. Use and
lock protective covers.
Secure all caps and filler plugs for fuel, hydraulic oil fluid, battery covers and radiator.
Know levels for engine coolant, crankcase, hydraulic oil and fuel tank.
Always place controls in neutral and set parking brake before starting.
Test braking while moving slowly.
Test steering, right and left, while moving slowly.
Listen to engine while moving slowly to determine any unusual noises.
Report any defect in machine noted during operation.
Observe instruments and gauges frequently.
Do not permit riders on machine.
Know and observe any traffic flow patterns on your job and obey flagman, road signs or
signals.
Do not adjust machine with engine running except when necessary.
Do not open hydraulic lines that are under pressure or if too hot to touch.
Do not smoke while refueling, turn off engine.
Connect steering lock link when working on machine.
See towing instructions in the Operator's Manual before attempting to tow a disabled
roller.
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-5
(N1291)
SP-600D
92" 2337 MM
123"
31 24 MM
1219 MM
I
[1524 MM]
104 1/2 - [2654 MM]
---- 66
16e9I
-
—72 1/2" 1942 MM
[
198 1/2 [5042 MM]
]
PERFORMANCE SPECIFICATIONS
ITEM
DESIGN DATA
English Metric
MAXIMUM TRAVEL SPEED
(Forward or Reverse)
5 MPH8 KPH
VIBRATION FREQUENCY RANGE: 1200-1900 VPM
VIBRATION DYNAMIC FORCE: © 1900 VPM: 30,320 LBS (MAX) 13,753 kg
INSIDE TURNING RADIUS 14 FT4,267 mm
OUTSIDE TURNING RADIUS 19 FT5,791 mm
WORKING WIDTH 72-1/2"1842 mm
WORKING WEIGHT 16,260 lbs.7,377 kg
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-6
(N1291)
SP-600PD
94"[2388 MM3
(27"
[3226 MM]
4
Gaide " Guaa 1
— Oftfi_o_ia
a
'J 00
°
a
t
[[ 1524MM]
104 1/2"
[ 2654 MM]
6 1/2"
[ 1689 MM]
198'1/2"
[5042 MM]
72 1/2" [1842 MM]
W/8LAIDE 76-4 /2" [ 1943 MM
_
217"
[5512 MM]
PERFORMANCE SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
MAXIMUM TRAVEL SPEED
(Forward or Reverse)
4 MPH
6.5 KPH
VIBRATION FREQUENCY RANGE:1100-1900 VPM
VIBRATION DYNAMIC FORCE: @ 1900 VPM: 30,320 LBS (MAX) 13,753 k g
INSIDE TURNING RADIUS
14 FT4,267 mm
OUTSIDE TURNING RADIUS
19 FT5,791 mm
WORKING WIDTH (STANDARD)
WORKING WIDTH (W/BLADE)
72-1/2"1842 mm
76-1/2"1943 mm
WORKING WEIGHT
16,800 lbs. 7,623 kg
RE,"( Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-7
(N1291)
ENGINE SPECIFICATIONS
DESIGN DATA
EnglishMetric
ITEM
TYPE
John Deere 4039T
NUMBER OF CYLINDERS
4 cylinder
CYCLE
Four Stroke
BORE
4.19 in.
106.5 mm
STROKE
4.33 in.
110 mm
TOTAL DISPLACEMENT 239 cu.in.
3920 cc
HORSEPOWER 110 at 2500 RPM82 kw
IDLE SPEED
HIGH IDLE SPEED
800 RPM
2750 RPM High Idle
2500 RPM Gov. Speed
GOVERNOR Variable Speed Type
COOLING SYSTEM
Type
System Capacity Thermostat
Pressure Cap Rating Water
21 op.20 liters
180 F82°C
7 PSI0.48 ATM
WEIGHT 962 lbs. (Dry)437 kg
CRANKCASE CAPACITY
With Filter Change
13 Ots.12.3L
15 Qts.14.2 L
BATTERY SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
AMPERES
170
VOLTS 12
544-8
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULIC SYSTEM SPECIFICATIONS
DESIGN DATA
English Metric
ITEM
HYDRAULIC TANK CAPACITY
27 gal102 liters
HYDRAULIC OIL FILTER
Quantity
Type
1
Screw On
HYDRAULIC STEERING PUMP
Type
Relief Pressure Setting
(High Idle)
Maximum Flow @ 2500 RPM
2000 PSI
13 GPM
POWER STEERING CYLINDER
Bore
Stroke
Rod
3 in.76.2 mm
20 in.508 mm
1-1/2 in.38.1 mm
POWER STEERING TIME
(HIGH IDLE, STOP-TO-STOP)
right-to-left
left-to-right
3.14 sec.
3.84 sec.
Gear
136 ATM
49.2 L/MIN
BRAKE SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
SERVICE BRAKES
Hydrostatic Dynamic
PARKING BRAKE
Spring Applied/
Hydraulic Release
Failsafe Wet Disk
Brake an Axle.
FUEL SYSTEM SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
FUEL TYPE
Diesel
FUEL TANK CAPACITY
35 gal.132.5 liters
FUEL INJECTORS
Quantity
Size
4
9.5 mm Pencil Type
Direct Injection
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-9
(N1291)
TRANSMISSION SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
,
SYSTEM RELIEF PRESSURE, TRACTION
4,500 PSI max
306 ATM
SYSTEM RELIEF PRESSURE, VIBRATION
Tank Capacity
Port Sizes:
Main Line Inlet/Outlet Ports (2)
3,000 PSI max
34 gal.
204 ATM
129 liters
SAE 1" Inlet
SAE 1" Outlet
25.4 mm
25.4 mm
DRUM SPECIFICATIONS
ITEM
DESIGN DATA
EnglishMetric
SP-600D
DRUM DIAMETER
DRUM WIDTH
DRUM SHELL
SP-600PD
DRUM DIAMETER
DRUM WIDTH
DRUM SHELL
PAD HEIGHT
CONTACT AREA
NUMBER OF PADS
48"
60"
5/8"
1219 mm
1524 mm
15.9 mm
48"
60"
5/8"
3-3/4"
12.62 IN2
108
1219 mm
1524 mm
15.9 mm
96 mm
814 mm2
REAR TRACTION TIRE SPECIFICATIONS
ITEM
DESIGN DATA
English Metric
SP-600D
SIZE
PLY
TYPE
SP-600PD
SIZE
PLY
TYPE
16.9 X 24
6
All Weather Diamond Tread
16.9 X 24
6
Lug
OPTIONS
LEVELING BLADE
LIGHTS
ROPS
SPEEDOMETER
BACK-UP ALARM
VANDAL COVERS
544-10
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
REXWORKS STANDARD WARRANTY
.
REXWORKS warrants to Distributor and Customer that its products are
free >from defects in material and workmanship, confbrm to any
drawings or specifications furnished by~ Customer or Distributor and
agreed to by RE XWORKS in writing and conform. to any description
made by REXWORKS in writing. This warranty is subject to the
REMEDY clause stated herein. Except for the foregoing warranty it is
agreed that THERE IS NO WARRANTY OF MERCHANTABILITY, NOR
ANY OTHER WARRANTIES, EXPRESSED OR IMPUED.
:::REMEDY:. All claims. must. be made within six (6) months of . delivery to
Customer. Upon satisfactory proof of claim, REXWORKS will within a
:reasonable time, make necessary . repairs or supply replacement: parts,
or where the foregOing IS. : deemed by REXWORKSIto be commercially
lenpractical, refund:the price received by REXWORKS forthe. ProdUct
Repair or replacement parts provided:
.,upon.. return of .
Linder this .remedy - will be supplied by REXWORKS.;.:.free::.of.: :Charge;:::
shipping- point, 'freight prepaid. . .and:' allowed' at :the lowest:*:
'available commercial rate: Charge for repairs; replacement orreturns..
:.for credit will not be allowed unless authorized by REXWORKS:i::inq
REXWORKSwill'...not be liable for any . other . coats;..damages;:or:
expenses.: that may :result: The :foregoing remedy ~ s .:SOLE AND
EXCLUSIVE :andli.states:the: full .extent:. of REXWORKS '` :liability NO
:OTHER. REMEDY: WILL • BE ALLOWED; WHETHER IN CONTRACT OR
:.TORT:.(INCLUDINaSTRICT LIABILITY` AND
.s
: ;
.
;.
:PRODUCT SAFETY'. • Products designed . and manufactured by
:REWORKS are capable of being used in a safer manner but
REXWORKS• cannot warrant their safety -under all circumstances..
CUSTOMER MUST INSTALL. AND USE THE PRODUCTS. IN .A:.SAFE.
AND LAWFUL MANNER IN COMPLIANCE WITH APPLICABLE HEALTH
AND SAFETY REGULATIONS AND LAWS AND GENERAL
STANDARDS OR REASONABLE. CARE.
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
INSTRUCTIONS FOR ORDERING PARTS
To assist your REXWORKS Distributor/Dealer in giving you prompt and
expedient parts service, PLEASE furnish the SERIAL NUMBER of the machine for
which parts are required. Specify quantity, part number and description when
ordering.
ALWAYS give complete billing and shipping instructions and method of
shipment.
MATERIAL LOST OR DAMAGED IN TRANSIT
All shipments are to be inspected by the Customer/Consignee prior to
acceptance. REXWORKS responsibility for loss or damage ceases upon delivery
to a carrier. Any claims for delays, damages, or shortages occurring after
REXWORKS delivers products to a carrier should be made directly to the carrier,
by the Customer/Consignee.
DESIGN CHANGE DISCLAIMER
REXWORKS INC. reserves the right to make design changes without notice, and
without being obligated to furnish such changes for machines previously sold.
WARRANTY DISCLAIMER
Equipment, accessories and components not manufactured by REXWORKS INC.
are warranted only to the extent of that Manufacturer's warranty, from date of
delivery and acceptance.
544-.2 .7
(N1291)
-7.G
■LILA, C.; or
i
4..)Ut../'.4W
64 ••
■
(N1291)
DECALS - INSTRUCTION AND NAME DECALS
B06906
CAUT Cti
CPO* 11.12 ■.•.%
p01 OIL
'ZEE
O
1.1101M...
.1..sr■ma
•.11141411ft 64
MIMS SIN
[
DIESEL'
AUT101;1
Aon maw
Osole
sumo
UPS •
'ex
MANUALS
licc
111•11.... ■
11:.:MiXtre...^11
••••••••. A.
Mbnoullh.
71L417-sim
g.
f
■INIIMO =MEMO
77
IMENIO
ale MPM104.11111■11.
ow. saw.
!,•PkAii:e
) 0
... Yr
WARNING
CLEARANCE CLOSES
ENGINE IS RUNNING
CAUTION
1
moo. .1., ••■
..•■•■
•• .11.41111
STAND CLEAR AND
DO NOT STAND ON
LADDER WHEN
74
13
S SERIES
11110•1141.11.1
T ut HIPLATION
1.2•111 Pill
OMEN.
MIR lily
I
USE STEERING FRAME
LOCK WHEN SERVIC•
ING MACHINE.
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
DECALS
-
INSTRUCTION AND NAME DECALS
ITEM NO.PART NUMBERQTY.DESCRIPTION
1102-31648-01
2102-31761-01
3102-10208-01
4102-12030-01
5102-11651-01
1Caution-Hot Oil Decal
3Silver Series Decal
1Tag-Shipping
2Inflation Label
1On/Off Label
6102-50424-011Control Console Decal
7102-08699-01 2Filter Indicator Decal
8102-31762-014Rex Decal
9102-10768-01 1Diesel Decal
10102-12905-012Caution-Chloride Decal
11102-11159-011Serial Number Plate
12102-50452-011Service Chart
13102-13041-012Do Not Tow Label
14102-10802-01 1Manual Holder Decal
15102-10801-01 1Manual Holder
16102-04708-01 2Artic Joint Decal
17102-10091-012Isolator Inflation Decal
18102-11145-01 1Vibrator Decal
19102-13038-021Striping Tape
20102-31817-01 1600D Decal
21102-31816-01 1600PD Decal
22102-08085-092Safety Walk Tape
23102-11382-01 2Rex Quality Decal
544-13
(N1291)
544-14
(N1291)
Model SP-OOOD ana 51-)-oUU.Pi.) I/Lora:cry twaer (6iiver ,)erzes)
DECALS - LOCATION OF INSTRUCTION AND NAME DECALS - (SP6OOD ONLY)
B0604C
R.L7 Y Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-15
(N1291)
DECALS - LOCATION OF INSTRUCTION AND NAME DECALS - (SP600D ONLY)
ITEM NO. PART NUMBERQTY.DESCRIPTION
1
2
3
4
5
102-31648-01
102-31761-01
102-10208-01
102-12030-01
102-11651-01
1
3
1
2
1
Caution-Hot Oil Decal
Silver Series Decal
Tag-Shipping
Inflation Label
On/Off Label
6
7
8
9
10
102-50424-01
102-08699-01
102-31762-01
102-10768-01
102-12905-01
1
2
4
1
2
Control Console Decal
Filter Indicator Decal
Rex Decal
Diesel Decal
Caution-Chloride Decal
11
12
13
14
15
102-11159-01
102-50452-01
102-13041-01
102-10802-01
102-10801-01
1
1
2
1
1
Serial Number Plate
Service Chart
Do Not Tow Label
Manual Holder Decal
Manual Holder
16
17
18
19
20
102-04708-01
102-10091-01
102-11145-01
102-13038-02
102-31817-01
2
2
1
1
1
Artic Joint Decal
Isolator Inflation Decal
Vibrator Decal
Striping Tape
600D Decal
22
23
102-08085-09
102-11382-01
2
2
Safety Walk Tape
Rex Quality Decal
(N1291)
DECALS - LOCATION OF INSTRUCTION AND NAME DECALS - (SP600PD ONLY)
B0604D
1 p e0
, .
g
1.
;6
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-17
(N1291)
DECALS - LOCATION OF INSTRUCTION AND NAME DECALS - (SP600PD ONLY)
ITEM NO. PART NUMBER QTY.DESCRIPTION
1102-31648-01 1Caution-Hot Oil Decal
2102-31761-01 3Silver Series Decal
3102-10208-01 1Tag-Shipping
4102-12030-01 2Inflation Label
5102-11651-01 1On/Off Label
6102-50424-01 1Control Console Decal
7102-08699-01 2Filter Indicator Decal
8102-31762-01 4Rex Decal
9102-10768-01 1Diesel Decal
10102-12905-01 2Caution-Chloride Decal
11102-11159-01 1Serial Number Plate
12102-50452-01 1Service Chart
13102-13041-01 2Do Not Tow Label
14102-10802-01 1Manual Holder Decal
15102-10801-01 1Manual Holder
16102-04708-01 2Artic Joint Decal
17102-10091-01 2Isolator Inflation Decal
18102-11145-01 1Vibrator Decal
19102-13038-02 1Striping Tape
21102-31816-01 1600PD Decal
22102-08085-092Safety Walk Tape
23102-11382-01 2Rex Quality Decal
544-18
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
L.UBRICAT I CN ANO MAINTENANCE CHART REXM111(2
REX MODEL
FOR MORE DETAILED INFORMATION REFER TO SP - 5000 4 SP - 500P0
OPERATORS MANUAL • FOR SP - 600P0 SILVER SERIES
OPERATORS MANUAL •FOR SP - 6000vISRATORY ROLLERS
CAPACITY
INTERVAL Perc000kamr
LUORICANT OR armee
Olaf:IgTON s N° Iff=
mows
POINTS
I
VIBRATOR BMA,'
1BEARING!
10 OR
DAILY
2
ENGINE
camaccAse OIL
I
AIR CLEANER
t
RAotArca
Cock.....,
,
212:tittii
I
OIL
C141ICK
INOICAToR
4 CLEAR •0.4I:4.
SHOWS RED
EN?
CLOWN?
REKuoaKS
g:[1614M;417TT.,;Aig7" CHIC* LEVEL
8111 ' amll!:t 1 ;rems
g
ARTtcuLArtmo
IT' sox
ONIvERSAL. JOINT
SLIP YORE
1
13
ENGINE 11-EL FILTER
I
IA
&ATTIC,' Me
iS
AxLE ROTOR
PLANETARY
1
CRAAKcASE OIL
IT
ENGINE
ALETICI2R '
CRAIN ANY
CMECX
wATER OR DIRT
DISTILLED WATER
PILL TO BOTTOM
or rtu..* NECK
=SAM TERMINALS
Level.
•mostsage ms SAC go
12,2
1
REFILL
ot
rLow
ENGINE
RANuPAcTuRER•S
srecIrtcArzoa
WARTS
141. 6 LtTERSI
i
REPLACE
Jomm
1
CHECK TENSION
rtemre m tr
NECESS ARY
JOINOEEPIE ARS004.
DEERE M3. T - 160AA
2
REPLACE
umsveRsAL J OINT
a
REPACK
•HOOILGREASE
REPACK
•NOSILORIASC SPECIAL
VIBRATOR
Aaron
DRAIN ANO
menu.
2
.E.LAcs
2•
as
OIFFEREMTIAL
I
DRAIN AND WILL
..EEL ENO
GEAR 60X
z
DRAIN AND WILL
25
.Du. SEAA11os
REPACK
eittg 4 41W 6 CP
2
RADIATOR
COOLANT
I
VI6$. sm..,
1
BEARINGS
wmtcmeveR comes r7RsT
Of AR BOX
AXLE moron/
1
PLANETARY
MAIN AND
REFILL
DRAIN AND
REFILL
[Id
2
2Ace
PIEL TANK
• .001ILUISE •6 SAE 90
(2.7/8 LITERs/
•.00ILUOIL • 6 SAE SO
.0,135ILGR6A5z .."
21
ETHYLENE
(20
ot.rcos.
Amrs.FReszc A CLEAN
WATER
QUARTS
L ITERS)
QUARTS
I16.9 LITERS)
••OSt6u1SE *0 900-00
16
tS QUARTS
(IA Ltrems)
••ostLuee mo sow-go
...oetLuss .s SA( so
moo.tz-ts PSI
"z "" .02
soopo,.e-Is
as:ATN1
(1.09-1.22 Aml
c► ecx ♦ tR
PRESSURE
OLAOE PIVOTS
.0 555..A0
6A3,4 PINTS
13 - I/O LITERS!
6 PINTS BACR 006
DRAIN AND REFILL
TIRES.
.9.2 x 2•
NP.
.mogn. ois.os
fizritTelgs;
•.0614u0e
MINLiEE44r
AS
A6 SAC 40
R
t IAE FUEL
ROLL DRIVE
NECESSARY
•RRSILuSE
.NOSILOREASE SPECIAL
23
27
•aostLusE ms SAE 90
ADD GREASE
DRAIN AND
LuSE
OIL FILTER
'ILL To LEVEL Plus
CHECK sOvt
volume
I
••00ILOREASE SPECIAL.
CHECK LEVEL FILL TO LEVEL PLUG
CHECK ELECTROLYTE
LEVEL.
CHECK repaiNALs
row GOOMocto.
iigORAuti ii OIL
4000
•HOOLL OTE,S
•aostLoReAse SPECIAL
JOINT4A00 GREASE
DIFFERENTIAL
.1 CECK LEVEL
'I
12
21
raZal "".:11iADJUST OR REPAIR AT ONCE
A00 WAS(
ENO
BEARINGS
SOO
92
PorER
siermlinTa rttmorm2
12
I,
300
02-
CHECx SLONT
FILL TO CRAM ER
GAUGE." oF RAWL
e
io
NO 031•110
roLs.ow ENGINE
mAmurAcruaessrectrIcArto r.s
AT
► V9T I.Ot.O AGAINST
-4
100
• .061LuSE
PLUS
DIPSTIC K LE.E4
7
SO
LEYEL
INDICATOR
:soLArom
a
TO
LEVELMAINTAIN
mama
CHECK
PNEUMATIC
'
LBVILL... 'ILL
CRCCS
Wt2v2^ 17;;e4SCAPS
•ApolLGREASE SPECIAL
GREASE
IA00 FUEL
•2 DIESEL FUEL
14S2AtNEPs1
', USE MOBIL OIL PRODUCT OR EQUIVALENT
••WITH WARM OIL
11 II
4
9
102-S0452-01
33
/n
0
/P
•
1423 2 _ 3 \_9
_/ 7
.
a .. a
/
I
\■ " .L'-=', .. a ... /
7■1.7
(
\
1
„,,("”'r
lIcac
.72:
-1.--..-.7
-- ..\
/,/7,r7:1-1
,..... 0
f471/
ImumpociE— ,
,---"*"1—it
/1I
4:: kt•-) LI/__ 1114
• (CY
.
'
y= 1=)
r--_ . „,
4 /2 I26i61031i 2i
8 s
288222 427
23i t1317
32
25
ENGINE:JOAN DEERE A039TNEGATIVE GROUND ELEC7RrCAL SYSTEM
.
RE X Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-19
(N1291)
544-20
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - ROLL FRAME - (SP 600D ONLY)
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1502-06805-80 1Roll Frame
2102-31240-012Scraper Bar
3298-00041-97165/8" Hard Washer
4298-00125-93165/8" X 2" HT C.S.
5398-02066-71 165/8"-11 Fig. Locknut
6102-10908-104Stauff Clamp
B0646B
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME
-
ROLL FRAME
-
544-21
(N1291)
(SP 600PD ONLY)
-
B0646C
ITEM NO.PART NUMBERQTY.DESCRIPTION
1502-06805-80 1Roll Frame SP600D,SP600PD
2298-00150-93 685/8" X 4-1/2" C.S.
3102-31012-0116Clamp, Raker
4102-31013-0116Bar, Raker
5298-00217-93 23/4" X 3-1/2" C.S.
6102-09263-01 23/4" Cut Washer
7298-02067-71 23/4" Nut
8102-10908-10 4Stauff Clamp
9298-02066-7172Lock Nut 5/8"-11
544-22
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - LEVELING BLADE OPTION (600PD ONLY)
B0701
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME
-
LEVELING BLADE OPTION (600PD ONLY)
ITEM NO.PART NUMBER QTY.DESCRIPTION
1102-13203-01 1Valve Control
2298-00458-47 1Control Cable
3102-13204-01 1Valve Adapter
4102-13208-01 1Hyd. Valve Mounting Plate
5102-10898-01 1Hydraulic Valve
6298-00111-93 33/8" X 3" Ht CAPSCREW.
7298-02065-71 33/8"-16 Locknut 3/8"-16 Locknut
544-23
(N1291)
REX Model SP 600D and SP 600PD Vibratory Roller (Silver Series)
544-24
(N1291)
-
-
FRONT FRAME - LEVELING BLADE OPTION (600PD ONLY)
B0702A
C
BLADE
CONTROL
VALVE
HYDRAULIC
TANK
502-05434-80
30
30 17 15
up ice
16
16
26
21—C
"\37 27 28 29
r C
22 18
19
20
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Sere.;)
FRONT FRAME LEVELING BLADE OPTION L600PD ONLY)
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-06820-80 1Leveling Blade
14298-02035-716Lock Nut
15298-02104-62 4Union Adapter
16102-02700-072Hose
17102-02700-15 2Hose Assembly
18298-02066-62 6Union, Adapter
19298-17010-86 2Tee 1/2"
20102-10909-011Bracket, Tee
21298-01014-04 4U-Bolt 1/4"
22102-02700-13 2Hose Assembly
23298-02070-622Union
24102-10898-011Hydraulic Valve
25402-03701-042Hose Assembly
26502-01351-80 1Hose Assembly
27102-11090-01 1Gear Pump
28298-08174-86 1Elbow, Adapter
29102-03849-03 2Hose, Suction
30102-10908-05 4Clamp, Stouff
31398-20000-88 2Cut Washer 1/4"
32298-02171-621Adapter 90deg
33298-14502-8613/4" X 1/2" Red. Bushing
37102-10187-01 1Gasket
544-25
(N1291)
544-26
(N1291)
RE.- Y Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - LEVELING BLADE OPTION (600PD ONLY) - (Continued)
B0702
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME LEVELING BLADE OPTION (600PD ONLY)
-
-
544-7 7
(N1291)
(Continued)
ITEM NO. PART NUMBERQTY.DESCRIPTION
1
2
3
4
5
502-06820-80
102-31003-01
398-01000-35
398-11000-04
102-31019-01
1
1
9
9
2
Leveling Blade
Blade Cutting Edge
1/2" X 1-1/2" Bolt, Carriage
1/2" Hex Nut
Pivot Blade
6
7
8
9
10
102-31020-01
398-11000-87
398-08000-07
298-08092-86
102-50240-01
2
2
2
1
2
Blade, Pivot Shaft
Nut, Sea Castle 1-1/4"
Lube Fitting
90 DEG Adapter
Cylinder
11
12
13
14
15
298-00217-93
398-02004-90
298-00042-97
298-02035-71
298-02104-62
2
2
8
6
4
3/4" X 3-1/2 Capscrew
3/4" X 2-3/4" Capscrew
3/4" Hardened Washer
Lock Nut
Union Adapter
16
17
19
20
102-02700-07
102-02700-15
298-17010-86
102-10909-01
2
2
2
1
Hose
Hose Assembly
Tee 1/2"
Bracket, Tee
21
34
35
36
298-01014-04
398-03000-86
398-20000-36
398-11000-17
4
2
8
8
U-Bolt 1/4"
3/16" X 2" Cotter Pin
1/4" Lock Washer
1/4" Nut
544-28
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - LEVELING BLADE CYLINDER (600PD ONLY)
B50240
soc==v
. v,._........,sh
/374r.ammicirmr AVOZOMIZAFZIPZ0/4921I AndleWfre 40F Areal
VIIIIP5
',!1
ov 1 rittA 1 va
'"-
f"i4
Mr
ke+70 .6 Ni I 1 g
r 1PeAk
v-uumus wit,
.
1
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - LEVELING BLADE CYLINDER (600PD ONLY)
ITEM NO. PART NUMBERQTY.DESCRIPTION
1102-50240-01 1Hydraulic Cylinder
2102-50240-02 1Full Hex Nut
3102-50240-0310-Ring W/Backup
4102-50240-04 1Piston
5102-50240-0510-Ring
6102-50240-06 1Rod Assembly
7102-50240-07 1Barrel Assembly
8102-50240-08 1Sleeve
9102-50240-09 10-Ring W/Backup
10102-50240-101Locl<wire
11102-50240-11 1Washer
12102-50240-12 1C.S.
13102-50240-13 1Dust Seal
14102-50240-1410-Ring W/Backup
15102-50240-15 1Seal Kit Includes Item 3,5,9,
13 And 14
544-'9
(N1291)
544-30
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIBRATORY DRUM ASSEMBLY (SP600D ONLY)
B0359A
REX Model SP-600D and SP-600PD Vlbratory Roller (Silver Series)
FRONT FRAME VIBRATORY DRUM ASSEMBLY (SP600D ONLY)
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1502-06867-80 1Roll Assembly
2602-03485-01 2Tire- Pneumatic
3502-20068-80 2Housing Isolator - Top
4502-20447-802Housing Isolator - Bottom
5398-02004-9083/4" X 2-3/4" Capscrew
6298-02035-71 8Locknut 3/4"
7298-00123-9365/8" X 1-1/2" Capscrew
8298-00087-93 65/8" X 3" Capscrew
9298-20000-41 125/8" Lockwasher
10402-02649-02 1Hub - Roll Drive
11402-02638-05 1Hub - Roll Driven
12402-02636-02 2Hub - Wheel
13102-10906-01 3Shim - Roll
14102-10906-02 3Shim - Roll
15102-10906-03 1Shim - Roll
16298-00095-93 163/4" X 2-3/4" Capscrew
17298-00042-97 173/4" Hardened Washer
18298-00377-02 2Spherical Bearing
19298-00347-02 4Cup - Bearing
20298-00348-024Cone - Bearing
21298-03112-68 4Oil Seal
22102-04776-01 1Ring - Bearing & Carrier
23102-09782-01 6Shim .005
24102-09782-026Shim .0075
25102-09782-026Shim .020
26298-00101-93 65/16" X 1" Capscrew
27398-20000-64 65/16" Lockwasher
28398-02004-91 63/8" X 1" Capscrew
29398-2000G-37 63/8" Lockwasher
30402-02642-02 1Wheel Mount
31298-02062-71 1Locknut 3/4"
32402-01813-02 1Yoke- Roll Drive
33298-00225-93 - 85/8" X 2-3/4" Capscrew
34298-00041-97 8-_5/8" Hardened Washer
35102-09765-01 1Coupling
36102-10164-01 1Coupling
37102-09766-01 1Sleeve
38298-03113-68 2Seal - Hub
39298-07532-34 2Snap Ring
40298-00103-17 1Pick-Up Magnetic
41502-00205-80 1Cord
42102-10165-01 1Sprocket
43298-00199-93 4#10-24 Capscrew
544-31
(N1291)
544-32
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIBRATORY DRUM ASSEMBLY (SP600D ONLY) (Continued)
B0359A
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME VIBRATORY DRUM ASSEMBLY (SP6OOD ONLY) (Continued)
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
45298-10036-0212Shim-plastic
46298-03562-68 20-Ring
47298-03563-68 20-Ring
48102-10892-01 2Gasket - Wheel Mount
49102-10893-01 1Gasket - Wheel Mount
50398-14005-73 21/2' Sq. Plug
51502-08636-80 1Shaft
52102-31004-01 1Bearing & Oil Retainer
53102-31006-01 1Bearing & Oil Retainer
54102-31103-01 2Frame Support
55102-50086-01 2Frame Support
57298-00038-97167/8" Hardwasher
58298-00224-9387/8" X 3" Capscrew
59298-02032-71 87/8" Locknut
60398-02006-6563/8" X 1-1/4" Capscrew
61102-12571-01 1Hydraulic Motor - Vibration
62398-06001-861Key
63402-01814-02 1Yoke - Internal Spline
64502-06955-88 1Yoke Assembly Roll Drive
65298-06086-91212c Spider Assembly
66298-00225-93165/8" X 2-3/4" Capscrew Gr. 8
67102-11275-01 1Roll Hub Plug
68298-03516-6810-Ring 3"
69298-00178-9341/2" X 1-1/4"
70398-20000-3941/2" Lockwasher
544-33
(N1291)
544-34
(NI291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIBRATORY DRUM ASSEMBLY (SP600PD ONLY)
B0359AA
ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-06867-80 1Vibratory Roll
2402-01805-01 108Compaction Pad
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-35
(N1291)
544-36
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIBRATORY DRUM ASSEMBLY (SP600PD ONLY)
B0359B
49
12
19
20
12
21
20
ti
2214 ,.,
15
■
I
16
33....,j
4 /
35 6
34
./ a
67
/
41 dn
/
- 39
/2.41
I A) 00aI 32
L36 20
27
22
24-25
23
6
55
8),,, 1
57 / 89
20
50
51
12
19
20
30 4 <t12/12°
17
21
4pij
43,
46 i
37
46
II
19
16
31
54
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME VIBRATORY DRUM ASSEMBLY (SP600PD ONLY)
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-06807-80 1Vibratory Roil
2502-20067-80 2Wheel, Isolator
3502-20068-80 2Isolator Hsg Top
4502-20477-802Sg Isolator Lower Half
5398-02004-9083/4" X 2-3/4" Ht Zn P1 C.S.
6298-02035-71 83/4" Locknut
7298-00123-9365/8" X 1-1/2" Ht Zn PI C.S.
8298-00087-93 65/8" X 3" C.S. - Lock
9398-20000-41 125/8" Lock Washer
10402-02649-021Hub-Roll Drive Side
11402-02638-05 1Hub-Roll Driven Side
12402-02636-022Hub Wheel
13102-10906-013Shim-Gear Case
14102-10906-02 3Shim-Gear Case
15102-10906-031Shim-Gear Case
16298-00095-93163/4" X 2-3/4" CS-lock
17298-00042-97163/4" Washer-Hardened
18298-00377-02 2Bearing-Spherical
19298-00347-02 4Bearing Cup
20298-00348-02 4Bearing Cone
21298-03112-684Oil Seal
22102-04776-01 1Bearing & Carrier Ring
23102-09782-016Shim .005
24102-09782-02 6Shim .0075
25102-09782-036Shim .020
26298-00101-9365/16" X 1 C.S.
27398-20000-6465/16" Lock Washer
28398-02004.-9163/8" X 1 Nylok Ht C.S.
29398-20000-3763/8" Lock Washer
30402-02642-02 1Wheel Mount
31398-06001-861Woodruff Key
32298-02062-71 13/4" Locknut-Light
33402-01813-02 1Yoke-Roll Drive
34298-00225-9385/8" X 2-3/4" Unf C.S. Gr 8
35298-00041-9785/8" Hardened Washer
36102-09765-011Exciter Coupling
37102-10164-011Exciter Coupling
38102-09766-01 1Coupling Sleeve
39298-03113-682Seal-Hub
40298-07532-34 2Snap Ring-Internal
544-37
(N1291)
544-33
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIBRATORY DRUM ASSEMBLY (SP600PD ONLY) (Continued)
ITEM NO.PART NUMBER _ QTY.DESCRIPTION
41298-00103-171Pick Up Magnetic
42502-00205-80 1Cord
43102-10165-01 1Sprocket - 30T
44298-00199-934#10-24 C.S. Soc Fiat Head
45398-20002-124#10 Ext Ctrsk Lock Washer
46298-10036-0212Shim-Plastic
47298-03562-68 20-Ring
48298-03563-6820-Ring
49102-10892-01 1Wheel Mount Gasket
50102-10893-01 1Motor Mount Gasket
51398-14005-73 41/2' Sq St Plug
52502-08636-80 1Shaft Assy-Vibrator
53102-31004-01 1Brg & Oil Retainer
54102-31006-011Brg & Oil Retainer
55298-02032-7187/8" Locknut
56398-02006-6563/8" X 1-1/4" Ht Soc C.S.
57298-00178-9341/2" X 1-1/4" Lo CS-gr 5
58398-20000-3941/2' Lock Washer
59298-00142-93161/2" X 2-1/4" Capscrew
60298-06065-682Tire, Isolator-Completed
61298-06036-682Tube
62102-31103-01 2Frame Support
63102-50086-012Frame Support
64298-00224-93- 87/8" X 3" C.S.
65102-12870-011Hyd. Motor
66401-01813-021Yoke-Roll Drive
67402-01814-02 .1Yoke-Internal SP, Roll Drive
68298-06086-91 2120 Spider Assy
X Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-39
(N1291)
544-40
(N1291)
REX Model SP-600D and S
FRONT FRAME - DRUM DRIVE
t
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME
-
DRUM DRIVE GEAR CASE ASSEMBLY
ITEM NO. PART NUMBER QTY.DESCRIPTION
1298-00073-93
2102-30732-01
3102-10423-03
4298-00294-02
5298-00295-02
123/8" X 1" Fl Hd Self Lock CS
1Retainer - Bearing
2Shim - Plastic
1Bearing Cup
1Bearing Cone
6502-20792-801Pinion
7298-00114-02 1Bearing Cone
8298-00113-02 1Bearing Cup
9102-10125-01 6Shim .005
10102-10125-02 6Shim .0075
11102-10125-032Shim - .020
12102-30945-01 1Housing - Bearing
13298-00068-93 63/8" X 1-1/4" Fl Hd CS
14102-50363-01 1Mtg - Mctor
15398-20000-39 41/2" Lock Washer
16298-00114-93 41/2" X 1-1/2" Hex Hd CS
17102-31284-01 2Retainer - Roll Bearing
18298-10049-02 2Shim - .005
19298-00105-9363/8" X 1-1/4" Hex Hd Ht CS
20398-20000-3763/8" Lock Washer
21298-03112-681Oil Seal
22298-00410-022Bearing Cup
23298-00409-02 2Bearing Cone
24402-00719-031Gear-first Reduction
25298-00259-9385/8" X 2-3/4" UNF CS
26298-00041-97 85/8" Hardnened Washer
27402-01813-02 1Yoke - Roil Drive
28102-12870-01 1Hyd. Motor
29102-31285-01 1Shaft - Intermediate
30102-31291-01 1Gear-second Reduction
31402-01799-02 1-Gear - Output
32298-00348-02 .2:Bearing Cone
33298-00347-02 2Bearing Cup
34298-07530-34 1Retaining Ring
35298-03119-681Oil Seal
36298-13002-8613/4" Magnetic Pipe Plug
37502-08728-80 1Cover-Roll Drive Gear Box
38298-00104-93 103/8" X 1" Hex Hd CS
39398-20000-66103/8" Flat Washer
40102-30726-01 1Hub Gear
544-41
(N1291)
544-42
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - DRUM DRIVE GEAR CASE ASSEMBLY — (Continued)
ITEM NO. PART NUMBER QTY.DESCRIPTION
41
42
43
44
45
102-10124-01
102-10124-02
102-10124-03
102-30733-01
298-02093-01
AR
AR
AR
1
1
46
47
48
49
50
398-20000-25
298-00113-93
402-02643-03
102-10126-01
298-10051-02
4
4
1
1
6
1/2" Flat Washer
1/2" X 1 Hex Hd Ht CS
Gear Case - Roll Drive
Gasket
Shim - .020 Thick
51
52
53
54
55
298-10050-02
298-00042-97
298-00130-93
298-03125-68
298-02035-71
6
8
4
1
4
Shim - .0075 Thick
3/4" Flat Washer-hardened
3/4" X 21' Hex Hd CS
Oil Seal
3/4" Lock Nut
56
57
102-11378-01
298-00204-93
4
4
Spacer
3/4" X T' Hex Hd CS
Shim - .005
Shim - .0075
Shim - .020
Retainer - Bearing
Breather Vent
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-43
(N1291)
FRONT FRAME - PNEUMATIC VIBRATION ISOLATORS
B0673A
GROOVE
IN TIRE
SECT. A-A
SECTION B-B
ITEM NO. PART NUMBER QTY.DESCRIPTION
1298-06065-68
2298-06036-68
3298-06072-68 4298-05024-08 5502-20067-80
1Tire - Radial Ply
1Tire - Tube
1Cap - Tire Valve
1Bushing, Plastic
1Isolator Wheel
544-44
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - VIB METER PICK-UP ASSEMBLY (SP-600D ONLY)
B0703
R.-EX Model SP-600D and SP-600P.D Vibratory Roller (Silver Series)
544-45
(N1291)
FRONT FRAME VIB METER PICK UP ASSEMBLY (SP 600D ONLY)
-
-
-
ITEM NO. PART NUMBERQTY.DESCRIPTION
1502-30101-80 1Link Bracket
2102-10205-014Spacer
3298-00218-022Rod End
4298-02014-71 25/8" Lock Nut
5102-08522-01 1Threaded Rod
6398-11000-72 25/8" Light Jam Nut
7102-30267-01 1Stop Bracket
8398-20000-41 15/8" Lock Washer
9398-03000-63 1Cotter Pin
10298-02034-71 71/4" Lock Nut
11502-02930-80 1Core Stack - Oscillating
12102-08521-01 8Shim - .005
13102-08521-028Shim - .050
14102-08728-041Transformer Resonator Coil
15298-00086-174Connector
16398-99007-641Loom 3/8" X 18" Long
17298-00099-93 41/4" X 1" Hex Hd CS
18502-02931-80 1Core Stack - Stationary
19298-08521-342Retaining Ring
20298-00286-022Ball Bearing - Sealed
21298-00101-9335/16" X 3/4" Hex Hd CS
22398-20000-6435/16" Lock Washer
23502-20489-80 1Brkt-Amplitude Indicator Mounting
26102-08520-01 1Shaft
27102-04748-01 1Mounting Frame
28298-00165-93 41/4" X 2" Hex Hd CS Ht
29402-01728-02 1' Frame - Oscillating
20398-95000-18 1- Key
31398-17000-0711/4" X 3/8" Cup Pt Setscrew
32298-00138-93 15/8" X 3" Hex Hd CS
33398-08000-07 2. Lub Fitting
34298-00126-93 1-- 5/8" X 2-1/2" Hex Hd CS
544-46
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - ARTICULATING JOINT ASSEMBLY
B0645
544-40
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME - DRUM DRIVE GEAR CASE ASSEMBLY
B0677A
B0678A
X Model SP-600D and SP-OOOPD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-39
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FRONT FRAME ARTICULATING JOINT ASSEMBLY
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1402-01775-022Bearing Retainer
2298-00114-93 121/2" X 1-1/2" Hex Hd Ht CS
3298-00039-97 121/2" Hardened Washer
4298-10028-024Outer Ring Bearing
5402-02616-04 1Articulating Cross
6298-02035-71 53/4"-10 Locknut
7398-14005-63 21/8" Sq Steel Plug
8398-08000-19 3Lub Fitting - 90 Deg
9298-10027-024Inner Ring Bearing
10298-00042-9753/4" Hardened Washer
11298-00133-93 53/4" X 3" Hex Hd Ht PI CS
12102-31459-03 12Shim .020
13102-31459-0216Shim .010
14102-31459-01 8Shim .005
15398-08000-111Lub Fitting - 45 Deg
16502-06854-80 1Housing - Bearing
544-47
(N1291)
544-48
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - FRAME AND PLATFORM ASSEMBLY
B0670B
R.F_X Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME
-
FRAME AND PLATFORM ASSEMBLY
ITEM NO. PART NUMBERQTY.DESCRIPTION
1502-20813-80 1Seat Platform
2102-31669-01 1Cover
3398-20000-91 41/4" Zn PI Washer
4298-00174-93 41/4"-20 X 5/8" Zn PI CS
5298-00048-93 43/8"-16 X 1" Ht Hex Hd CS
6298-20000-66 43/8" Zn PI Washer
7298-02065-71 43/8"-16 Flgd Lock Nut
8502-09298-80 1Platform Assembly
9502-07123-80 1Frame
1Channel - Rubber
10X203699
11298-00110-93 43/8" X 2-1/2" Hex Hd CS
12298-05763-68 4Isolator
13298-00034-9783/8" Flat Washer
14298-02065-71 43/8" Fig Lock Nut
544-49
(N1291)
544-50
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - CENTER CONSOLE ASSEMBLY
,
B0665A
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-51
(R 192)
MAIN FRAME - CENTER CONSOLE ASSEMBLY
ITEM NO. PART NUMBER QTY.DESCRIPTION
1
2
3
5
298-00104-93
398-20000-66
502-30149-80
602-03796-01
602-03795-01
2
2
1
1
1
3/8" X 1" Zn PI CS
3/8" Washer
Cover, Console
Amplitude Meter (SP600D Only)
Vib Frequency Meter
6
7
8
9
10
298-00453-47
298-00278-47
298-16222-17
298-00124-17
298-06159-17
1
1
1
1
1
Steering Wheel
Steering Wheel Knob
Rheostat
Knob
DPST Toggle Switch
11
12
13
14
15
298-00052-17
298-06067-17
298-00093-93
298-20000-36
102-31671-01
1
1
6
6
1
Boot Shield - Toggle Switch
Horn Push Button Kit
1/4" X 3/4" Zn PI CS
1/4" Lock Washer
Cover
16
17
18
398-01001-70
298-00044-71
502-09281-80
2
2
1
1/4" X 3/4" Carr Bolt
Acorn Nut
Center Console
4
544-52
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Senes)
MAIN FRAME - FREQUENCY METER ASSEMBLY
B3795C
NOTM
1 ) exam wt*C To PC
OTT. LONG.
Z)U5C i s w.. isTW
On M..
3) =rote= wile=
TO vortt TERIAINAI-7
de ArrAcm TO TABS
CM P.O. MODULE.
NEGATIVE
GROUND
SYSTEM
1,00 SOLDER TO
PERIAAr4ENT'LY AlrrIX
1
`Inlet TOM. TO TAUS.
a) Cove* CONN. or
*Putt TO P.O.
isOOLII.Z.verTto SELA22/
SSR1NK
NOTE:
DO NOT PAINT
BACK OF is4ETER.
t
MAGNETIC
PICKUP
293-103-17
.CCRD ASSEIABLY •
502-0020.5—ao
•
IGNITION SwITON
12A
CIRCUIT
BREAKER
C
ITEM NO.PART NUMBER QTY.DESCRIPTION
1602-03795-01 1Frequency Meter
•
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-53
(N1291)
544-54
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - SIDE CONSOLE AND CONTROLS ASSEMBLY
B0666A
QUADRASTAT
CONTROL
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - SIDE CONSOLE AND CONTROLS ASSEMBLY
ITEM NO. PART NUMBER MY.DESCRIPTION
1298-00098-93
2298-02068-71
3298-00052-17
4298-06139-17
5298-06159-17
41/4" X 3/4" Zn PI CS
41/4"-20 Ca Pt Flgd Lock Nut
2Boot - Toggle Switch
1SPST Toggle Switch
1DPST Toggle Switch
6298-03040-17 1Fuel Gauge
7298-06253-17 1Engine Temp Gauge
8298-03041-17 1Tach/hour Meter Gauge
9102-31728-01 1Panel
10298-06251-17 1Voltage Gauge
11298-06252-17 1Oil Pressure Gauge
12398-02077-49 4#10 Self Tapping Screw
13298-02065-7123/8"-16 Ca PI Flgd Lock Nut
14502-30164-80 1Cover
15298-00104-93 23/8%16 Zn Pt CS
16212-00276-17 1Ignition Switch
17298-06568-17 1Limit Switch
18398-20000-784#8 Lock Washer
19398-10002-24 4#8-32 X 3/4" Rd Hd CS
20298-05004-17 12 Amp Circuit Breaker
21298-05005-17120 Amp Circuit Breaker
22502-09282-80 1Control Pedestal
544-55
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - BACK-UP ALARM ASSEMBLY
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME
-
BACK UP ALARM ASSEMBLY
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1
2
3
4
5
298-00103-93
212-00299-17
102-31838-01
398-11000-16
398-20001-25
1
1
1
2
2
3/8" X 3/4" Lg Ht CS
Back-Up Alarm Switch
Bracket
#10-24 Hex Nut
1/4" Lock Washer
544-57
(N1291)
544-58
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - BACK-UP ALARM
OPTIONAL
EQUIPMENT No 3
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME BACK UP ALARM
-
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1212-00299-17 1Back-Up Alarm
2298-06565-17 1Back-Up Alarm Switch
3398-04000-641Wire
4398-95002-941Loom
5298-26007-17 4Ring Terminal
6298-26005-171Ring Terminal
544-59
(N1291)
544-60
(IV1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - FENDERS AND LADDERS
B0667A
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME FENDERS AND LADDERS
-
ITEM NO. PART NUMBERQTY.DESCRIPTION
1502-09436-80 1Fender, L.H.
2298-00113-93141/21 -13 X 1" Zn PI CS
3298-00039-97 141/2' Zn PI Washer
4298-02065-71 63/8"-16 Ca PI Lock Nut
5298-02063-71141/2"-13 Ca PI Lock Nut
6502-09436-81 1Fender, R.H.
7502-09435-801Ladder, L.H.
8298-20000-6663/8" Zn PI Washer
9298-00104-9363/8"-16 X 1" Zn PI CS
10502-09435-81 1Ladder, R.H.
11102-13104-01 4Spacer
12502-30232-801Handrail, Right
13502-30232-81 1Handrail, Left
544-61
(N1291)
544-62
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - RADIATOR. SHROUD AND COVERS
B0649A
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME RADIATOR, SHROUD AND COVERS
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1502-09247-801Radiator Shroud
2102-50345-01 1Engine Hood
3502-20003-801Front Grille
4502-20800-801Vandal Door
5502-20004801Vandal Door
544-63
(N1291)
544-64
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - OPERATOR'S SEAT
B0644A
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-65
(N1291)
MAIN FRAME OPERATOR'S SEAT
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1
102-12947-01
1
2
3
4
5
102-12947-11
102-12947-12
102-12947-13
102-12947-14
1
1
1
1
Operator Seat
Includes Items 2 Thru 5
Back Cushion
Arm - Left Hand
Seat Cushion
Arm - Right Hand
6
7
8
9
10
102-31667-01
298-00227-93
398-20000-64
398-11000-18
393-02002-19
2
4
4
4
4
Support Seat
5/16" x 1" HT CS
5/16" Washer
5/16" Nut
1/2" X 1-1/4" HT CS
11
12
298-20000-39
398-11000-22
4
4
1/2" Washer
1/2" Nut
A
NOTE
When Ordering Back Cushion Or Seat Cushion You Must Specify Black Vinyl
Facing And Silver Body.
544-66
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME - QUADRASTAT CONTROL
B0684
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME
-
QUADRASTAT CONTROL
ITEM NO. PART NUMBER QTY.DESCRIPTION
1102-31689-01 1Quadrastat Control
Includes Items 2 Thru 15
2102-31689-11 1Gate Plate
3112-10130-43 1Knob
4102-31689-121Switch - Push Button
5102-31689-131Retaining Ring
6102-31689-141Bolt
7102-31689-151Lever, Knob & Switch Assembly
8102-31689-161Input Adapter
9102-11714-132Swivel
10102-31689-171Spring
11112-10130-471Friction Control
12102-31689-181Output Lever
13112-10130-491Housing
14102-31689-19 1Control Sub Assembly
15102-31689-201Input Lever
544-67
(N1291)
544-68
(N1291)
..
REX Model SP-600D and SP-600PD Kbratory Roller (Silver Series)
MAIN FRAME - PROPEL CONTROL CABLE
B0676
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
MAIN FRAME PROPEL CONTROL CABLE
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-00360-80 1Lever Arm
2298-00176-93 11/4" X 1-1/4" Hex Hd CS
3398-02034-7121/4" Hex Nut
4102-12843-03 1Cable
5398-02001-44 21/4" X 3/4" Hex Hd CS
6398-20000-36 21/4" Flatwasher
7298-06568-171Limit Switch
8102-31670-01 1Mounting Bracket
9398-02077-55 2#10-24 X 1-1/4" Screw
10398-11000-16 7#10-24 Nut
11398-20000-35 6#10 Lock Washer
12298-00157-47 1Bracket - Cable Clamp
13298-00099-93 21/4" X 1" Hh CS
14398-11003-4721/4"Hex Nut
15398-20001-25 21/4" Lock Washer
16298-00158-471Cable Clamp
17398-10000-48 4#10-24 X 3/4" Screw
18298-00276-02 1Rod End
544-69
(N1291)
544-70
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - PUMP AND MOTOR MOUNTING
B0660A
POWER
STEEPING
PUP
VIBRATION
PUMP
s'ss.
'1 ‘‘
Zs<
Is•• ■".}›:
Ity,
#
Ssra
TRACTION
PUMP
TRACTION
MOTOR
(AXLE (DRIVE)
TRACTION
MOTOR
(ROLL [DRIVE)
VIBRATION
MOTOR •
ROLL DRIVE
GEAR BOX
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS
-
PUMP AND MOTOR MOUNTING
ITEM NO. PART NUMBERQTY.DESCRIPTION
23/8" X 1" Hex Hd CS
1298-00104-93
16
1/2" Flat Washer - Hardened
2298-00039-97
2
1/2" X 2" Hex Hd CS
3398-02002-28
2
1/2" Locknut
4398-11000-89
8
1/2"
X 1-3/4" Hex Hd CS
5298-00115-93
6102-01781-01 2Gasket
7298-00114-93 61/2" X 1-1/2" Hex Hd CS
8102-10126-01 1Gasket
10-Ring
9298-03594-68
544-71
(NI291)
544-72
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS
-
LEVELING BLADE OPTION (SP 600PD ONLY)
-
GEAR PUMP
I 02- I I 090-0 I
5
HYDRAULIC TANK
502-05434-20
HYDRAULIC VALVE
102-10898-01
TOP
HYDRAULIC CYLINDER
I 02-50240-0 I LEFT FRONT
RIGHT FRONT
FRONT OF MACHINE
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-73
(N1291)
HYDRAULICS - LEVELING BLADE OPTION (SP-600PD ONLY)
HYDRAUUC
NUMBER
UNE
FUNCTION
PART NUMBER
DESCRIPTION
U31
Hyd. Cylinder
(R. Front) Port
'B' To 'TEE 2'
102-02700-07
298-02104-62
298-02066-62
298-17010-86
Hose Assy. 3/8" ID X 102'
90 o Swiv. Adapt/9/16 0-Ring - 3/8' NPST
Adapter
1/2' NPT Tee
LB2
Hyd. Cylinder
(R. Front) Port 'A'
to 'Tee 1'
102-02700-15
298-02104-62
298-02066-62
298-17010-86
Hose Assembly 3/8' ID X 90
90° Swiv. Adapt/9/16 0-Ring - 3/8' NPST
Adapter
1/2' NPT Tee
L.B3
Hyd. Cylinder
(L Front) Port 'A'
To 'Tee 1'
102-02700-07
298-02104-62
298-02066-62
Hose Assembly 3/8" ID X 102
90° Swiv. Adapt/9/16 0-Ring- 3/8" NPST
Adapter
LB4
Hyd. Cylinder
(L Front) Port '5'
To 'Tee 2'
102-02700-15
298-02104-62
298-02066-62
Hose Assembly 3/8' ID X 90
90° Swiv. Adapt/9/16 0-Ring-3/8' NPST
Adapter
LB5
'Tee 2' To Port
'A' Of Hyd. Valve
102-02700-16
298-02070-62
298-02066-62
Hose Assembly 3/8' ID X 60
Adapter
Adapter
L.136
'Tee 1' To Port
'B' Of Hyd. Valve
102-02700-16
298-02070-62
298-02066-62
Hose Assembly 3/8' ID X 60
Adapter
Adapter
LB7
Bottom (Out) Port Of
Hyd. Valve To Port
'C' Of Hyd. Tank
502-01350-91
298-06501-86
LB8
'IN' Port Of Gear
Pump to Port 'B'
Of Hyd. Tank
102-03849-03
298-08174-86
Hose Assembly 3/41D X 16-1/2
Adapter
LB9
'OUT' Port Of Gear
Pump To Top Port
Of Hyd. Tank
1 02-03701-1 4
298-02171-62
298-14502-86
298-08156-86
Hose Assembly 1/21D X 24
90° Adapt/1/2 NPT - 3/4-16 Jib
3/4 X 1/2 Reducer Bushing
Adapter
Hose Assembly 3/41D X 54
._Adapter
544-74
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - VIBRATORY SYSTEM
B 05931.L.
VIBRATORY
MOTOR
102- 12571-01
AL-,-1
VIBRATORY PUMP
102- 12821-01
HYDRAULIC
TANK
502- 05434-80
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-75
(N1291)
HYDRAULICS - VIBRATORY SYSTEM
HYDRAUUC
NUMBER
UNE
FUNCTION
PART NUMBER
DESCRIPTION
V1
Filter At Tank To
Inlet Vibratory Pump
102-03688-02
298-06577-86
Hose Assembly 3/4' ID X 82 LG
Elbow 90° 1-5/16 0-Ring X 1-1/16 Jic
V2
Port 'A' At Vibratory
Pump To Port 'A'
Vibratory Motor
102-30741-09
298-08076-86
Hose Assembly 110 X 206 LG
90° SAE 0-Ring/37° flare adpater
© pump
0-Ring (SAE 1')
Split Flange Clamp
3/8' X 1-1/4' HT ZN PL CS
3/8' Lock Washer
102-01594-04
298-08033-86
298-00105-93
398-20000-37
V3
Port 'B' At Vibratory
Pump To Port 'B'
Vibratory Motor
102-30741-09
298-08076-86
102-01594-04
298-08033-86
298-00105-93
398-20000-37
Hose Assembly 11D X 206 LG
90 0 SAE O-Ring/37° flare adpater
© pump
0-Ring (SAE 1')
Split Flange Clamp
3/8" X 1-1/4' HT ZN PL CS
3/8' Lock Washer
QTY
1
1
1
2
4
4
1
1
2
4
4
V4
Case Drain of Vibratory
Pump To Tee Assy.
At Port 'B' Of Oil
Cooler
502-08614-86
298-06578-86
Hose Assembly 3/4' ID X 14 LG
45° SAE 0-Ring/37° flare adapter
© pump
1
1
V5
Case Crain of Vibratory
Motor To Tee Assy.
Port *A" Of Oil Cooler
502-01342-82
298-14503-86
298-02081-62
Hose Assembly 1/4" ID X 216 LG
NPTF reducer adapter @ cooler
Adapter 1/4" NPT Swivel X 45 Deg
1
1
544-76
(N1291)
REX Model SP-600D and SP-600PD Vibrarory Roller (Silver Series)
HYDRAULICS - OIL COOLER
B05911-
0
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS
-
OIL COOLER
ITEM NO.PART NUMBER QTY.DESCRIPTION
1102-31193-01 1Oil Cooler
2298-13030-8621" Pipe Plug
3298-08201-8611" 90Deg Adapter
4502-08614-81 1Hose Assy 3/4" X 16-1/2 LG
5298-00181-53 1Relief Check Valve
6298-06571-81 11" X 3/4" 90 Deg Adapter
7298-14500-86 11" X 3/4" Red. Bushing
8298-02263-62 23/4" Service Tee
9298-14503-8613/4" X 1/4" Red. Bushing
10298-02157-62 13/4" X 1-1/16" Str. Adapter
11298-06579-86 190 Deg Adapter 1"
12298-06500-8611" Street Elbow
544-77
(N1291)
544-73
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - VIBRATORY PUMP
B0655
HYDRAULICS - VIBRATORY PUMP
ITEM NO. PART NUMBERQTY.DESCRIPTION
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
1102-12821-01 1Pump - Variable Displacement
Includes Items 2 Thru 43
1
Plug
102-12821-11
2
3102-12821-12 1Key
4102-12821-131Nut - Slotted
5102-12821-141Retaining Ring
6102-12821-15 1Lip Seal
7102-12821-16 2Plug
8102-12821-17 1Relief Valve Kit
Consisting Of Items 9 & 10
9102-12821-18 1SCR Valve
10102-12821-19 20-Ring
11102-12821-20 1Orifice/Screen .
12102-12821-21 10-Ring
13102-12821-22 20-Ring
14102-12821-23 1EDC - Electric Displ. Control
15102-12821-242Screw
16102-12821-25 2Screw
17102-12821-26 2Plug
18102-12821-271Suction Filter Adaptor
19102-12821-28 2Screw
20102-12821-29 2Plug
21102-12821-30 1Screw
22102-12821-31 1Plug
23102-12821-3230-Ring
24102-12821-33 1Key
25102-12821-341Gerotor Assembly
26102-12821-351Pin
27102-12821-36 1Gerotor
28102-12821-3710-Ring
29102-12821-38 1Temper Load Ring
30102-12821-39 1Adapter
31102-12821-4010-Ring
32102-12821-41 1Cover Plate
33102-12821-422Screw
34102-12821-43 1Relief Valve Kit
Consisting Of Items 10 & 35
35102-12821-441SCR Valve
36102-12821-45 10-Ring
37102-12821-461Plug
38102-12821-471Relief Valve Shim Kit
39102-12821-481Charge Relief Valve Spring
40102-12821-491Relief Valve
41102-12821-5010-Ring
42102-12821-51 1Back-Up Ring
43102-12821-521Bypass Valve-No Orifice
544-79
(N1291)
544-80
(N1291)
REX' Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - VIBRATORY MOTOR
B0656
ITEM NO.PART NUMBERQTY.DESCRIPTION
1102-12571-01 1Motor - Fixed Displacement
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-81
(N1291)
544-82
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - STEERING SYSTEM
B0594B
POWER
STEERING
UNIT
102-12323-01
PR
102-12500-01
POWER
STEERING
PUMP
POWER
STEERING
CYLINDER
102-30292 -01
502-05434-80
HYDRAULIC '
TANK
C
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-83
(N1291)
HYDRAULICS - STEERING SYSTEM
HYDRAULIC UNE
NUMBERFUNCTION
PART NUMBER DESCRIPTION
QTY
PSI
Tank Port '0' To Inlet
Power Steering Pump
102-03688-02 Hose Assembly 3/4' ID X 82 LG
398-14001-423/4' X 90Deg. Street Ell
PS2
Pressure Power Steering
Pump To Inlet Power
Steering Unit
102-03701-10
298-08303-86
298-08110-86
Hose Assembly 1/2' ID X 102 LG
Elbow 90° 7/8' 0-Ring X 3/4-16 JIC
SAE O-Ring/37° flare adapter g valve
PS3
Steering Unit Port 'L'
To Steering Cylinder
P ort 'L'
102-03701-04
298-08187-86
298-08112-86
Hose Assembly 1/2' ID X 102 LG
SAE 0-Ring /37° fl re adapter g valve
4e male NPTF/37" flare adapter
g cylinder
1
1
1
PS4
Steering Unit Port
'R' To Steering Cylinder
Port 'R'
102-03701-04
298-08110-86
Hose Assembly 1/2' ID X 102 LG
SAE 0-Ring/37° flare adapter
@ valve
90° male NPTF/37° flare adapter
g cylinder
1
1
PS5
Steering Valve Return
Port To Tee Assembly
At Tank Port 'C'
102-03701-05 Hose Assembly 1/2" ID X 136 LG
298-08187-86 SAE 0-Ring/37 ° flare adapter @ valve
PS6
Power Steering Pump102-03701-02
Tank Port To Tee Assembly 298-08302-86
At Tank Port 'C'
298 - 09044 - 85
102-12323-01
298-00105-93
298-02171-62
Hose Assembly 1/2' !D X 88 LG
SAE O-Ring/37° flare
adapter © pump
clamp
Power Steering Unit
3/8' X 1-1/4' HH CS
1
1
1
1
1
1
1
1
2
544-84
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS -POWER STEERING PUMP
B0574
ITEM NO.PART NUMBERQTY.DESCRIPTION
1102-12500-01 1Pump - Fixed Displacement
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-85
(N1291)
HYDRAULICS - STEERING UNIT
B0663
ITEM NO. PART NUMBER QTY.DESCRIPTION
1102-12323-01 1Orbitrol Unit W/Nut
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-86
(N1291)
HYDRAULICS -HYDRAULIC CYLINDER, POWER STEERING
B0517
5 4
1
■••■■
1
,
8 9 10 11 12
.1
'4 11 1111 1 1
#•-•
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS HYDRAULIC CYLINDER, POWER STEERING
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
102-30292-01 Hyd. Cylinder
1102-30292-11 1Lock Nut
2 *102-30292-12 1Poly-pac
3102-30292-13 2Piston
4102-30292-14 1Barrel Assy.
5102-30292-15 1Rod
6 *102-30292-16 10-Ring
7 *102-30292-17 10-Ring
8102-30292-18 1Lock Wire
9102-30292-19 2Cap
10102-30292-20 2Capscrew
11102-30292-21 12102-04714-19
13102-30292-22
1Dust Seal
10-Ring
1Seal Service Kit
* = ITEMS INCLUDED IN SERVICE SEAL KIT - ITEM 13
544-87
(N1291)
544-88
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - STEERING CYLINDER MOUNTING
60651A
STEERING
CYLINDER
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS STEERING CYLINDER MOUNTING
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1398-03000-68 23/16" X 2" Cotter
2398-11000-87 21-1/4" Castle Nut
2Washer - Special
359077
4102-09768-01 4Washer - Special
5298-07527-34 2Snap Ring
6298-06806-08 2Bushing
7298-02063-71 21/2"-13 Locknut -Flg.
8102-30437-01 2Housing - Ball Stud
9102-09767-01 2Stud Ball
10398-08000-19 2Lube Fitting - 45°
11298-00116-93 21/2" X 2-1/4" Hex Hd CS
12298-08112-86 145Deg Elbow
13398-20000-39 21/2" Lock Washer
14298-02171-62190Deg. Adapter
544-89
(N1291)
544-90
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS
-
GROUND DRIVE SYSTEM
OIL COOLER
102-31193-01
TRACTION MOTOR
102-12561-01
3A
L
\----TRACTION PUMP
102-12823-01
VALVE ASSEMBLY'
102-12875-01
HYDRAULIC TANK
502-05434-80
CASE DRAIN
OLL DRIVE MOTOR
102-12870-01
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-9.1
(N1291)
HYDRAULICS - GROUND DRIVE SYSTEM
HYDRAUUC
NUMBER
UNE
FUNCTION
PART NUMBER
DESCRIPTION QTY
GD1
Roll Drive Motor
Case Drain To Valve
Assembly Port '7'
(Underneath)
502-01342-80
298-02105-62
398-14000-10
298-08155-86
Hose Assembly
0-Ring X 1/4 PT Adapter
1/2 X 1/4 Reducing Bushing
1/2 NPTF Pipe Tee
1
1
1
1
GD2
Roll Drive Motor Port
'B' To Valve Assembly
Port '1'
102-31027-03
102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08181-86
298-08178-86
Hose Assembly 1 ID X 156 LG
1' SAE 0-Ring
1' Split Flange Clamp
3/8' X 1-1/4' HT ZN PL CS
3/8' Lockwasher
1' SF X 1-5/16 Jic Adapter
1-5/16 0-Ring X 1-5/16 Jicv Elbow
1
1
2
4
4
1
GD3
Roll Drive Motor
Port 'A' To Valve
Assembly Port '4'
102-31027-03
102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08181-86
298-06628-66
298-08187-86
Hose Assembly
0-Ring
Split Flange Clamp
3/8' X 1-1/4' Cap Screw
3/8' Lock Washer
1' SF X 1-5/16 Jic Adapter
1-5/16' Jic 45 0 Swivel Elbow
1 6-5/16 0-Ring X 1-5/16' Jic Elbow
1
1
2
4
4
1
1
1
GD4
Hydraulic Tank Port
'A" To Oil Cooler
Port 'A'
102-31043-01
298-02141-62
Hose Assembly 11D X 57 LG
Str. Adapter 1' NPTF X 1-5/16 JIC
1
1
GD5
Traction Motor Port
'B' To Valve
Assembly Port '2'
102-31026-06
102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08183-86
Hose Assembly 11D X 25 LG
0-Ring
1'Split Flange Clamp
3/8' X 1-1/4 Ht Zn PI CS
3/8' Lock Washer
45Deg Elbow-1' Split Flange X 1-5/16-12 Jic
1
2
4
4
1
GD6
Traction Motor Upper
Port To Valve
Assembly Port '7"
(Underneath)
502-08619-84
298-02151-62
298-08339-86
Hose Assembly 5/81D x 27 LG
1/2' pt - 7/8' Jic Conn.
3/4' 0-Ring X 7/8' Jic Elbow
1
1
1
GD7
Traction Pump Upper
Port To Oil Cooler
Port 'B'
502-08614-87
298-08198-86
298-02157-62
Hose Assembly 3/4' ID X 84" LG
90 Deg Elbow 7/8" 0-Ring X 1-1/16 1-12 Jic
Str Adapter 3/4' NPTF X 1-1/16'-12 Jic
1
1
1
544-92
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - GROUND DRIVE SYSTEM -- (Continued)
HYDRAUUC
NUMBER
UNE
FUNCTION
GD8
QTY
PART NUMBER
DESCRIPTION
Traction Motor Port
'A' To Valve Assembly
Port '3'
102-31026-06
102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08183-86
Hose Assembly 11D X 25 LG
1
1' SAE 0-Ring
1
1'Split Flange Clamp
2
3/8' X 1-1/4' Ht Zn Pl CS
4
3/8' Lock Washer
4
45Deg Elbow-1 1 Split Flange X 1-5/16-12 Jic 1
GD9
Filter At Tank Port
'B' To Charge Pump
Inlet On Traction Pump
102-03849-04
298-08092-86
298-13019-86
298-14500-86
Hose Assembly 3/4' ID X 16-1/2' LG
Elbow 1-5/16' 0-Ring X 3/4' NPSM
3/4' NPTF Pipe Plug
1 X 3/4' Reducer
1
1
1
1
GD10
Traction Pump Port
'A' To Valve Assembly
Port '5'
102-31026-06
• 102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08183-86
Hose Assembly 1"ID X 25 LG
1' SAE 0-Ring
1'Split Flange Clamp
3/8' X 1-1/4' Ht Zn PI CS
3/8' Lock Washer
45Deg Elbow-1' Split Flange X 1-5/16-12 Jic
1
2
4
8
8
GD11
Traction Pump Port
'B' To Valve
Assembly Port '6'
Hose Assembly l'ID X 25 LG
1' SAE 0-Ring
1'Split Flange Clamp
3/8' X 1-1/4' Ht Zn PI CS
3/8' Lock Washer
1' SF X 1-5/16' Jic Adapter
1' SF X 1-5/16' Jic Elbow
1
1
2
4
4
1
1
GD12
Traction Pump Lower
Port To Traction Motcr
Lower Port
Hose Assembly 3/4' ID X 86' LG= =
45 Deg Elbow - 7/8' 0-Ring X 1-1/1611-12 Jic
1/2' PT X 1-1/16 Jic Conn
3/4' 0-Ring X 1/2" Pt Elbow
1
1
1
1
102-31026-06
102-01594-04
298-08033-86
298-00105-93
398-20000-97
298-08186-86
298-09061-86
- 502-08614-85
298-08203-86
298-02139-62
298-06635-86
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS
-
544-93
(N1291)
MOUNTING BLOCK MANIFOLD ASSEMBLY
B0715
ITEMPART NUMBERQTY.DESCRIPTION
1502-30179-80 1Mounting Plate
2102-12875-01 1Valve Manifold
3102-31027-03 2Hose 1" X 156" Lg
4102-31026-06 2Hose 1" X 25" Lg
5502-08619-84 1Hose 5/8" X 27' Lg
6102-31026-01 2Hose 1" X 48" Lg
7102-05427-01 1Mounting Block Manifold Valve
8502-01341-96 1Hose 1/4" X 144" Lg
544-94
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULIC DISC BRAKE
102-12750-01
B0716
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-95
(N1291)
HYDRAULICS - HYDRAULIC OIL TANK PORTS
B0591 C
HYDRAULIC OIL TANK
VIEW FROM REAR OF MACHINE
3/4 F/i.1 PT
O°
C
I Mit■IP7
1_1
I/ N
FAI FT
544-96
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - BRAKE SYSTEM
HYDRAULIC DISC BRAKE
( /0 z - 12.750 - 01)
Bl_ I
7--
BRAKE VALVE
(/01- oi)
TRACT ION PUMP
(102- 122'23 - o
HYDRAULIC TANK
(So Z- os4 3 1 -2o)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-97
(N1291)
HYDRAULICS - BRAKE SYSTEM
HYDRAULIC
NUMBER
UNE
FUNCTION
PART NUMBER
DESCRIPTION
BL1
Hydraulic Disc Brake
To Port 'B' Of
Brake Valve
102-30030-12
298-06572-86
298-08184-86
Hose Assembly 1/4' ID X 82 LG
1
SAE 0-Ring37" Flare Adapter @ Valve 1
90Deg Sae O-Ring/37° Flare Adapt @ Brake 1
B1.2
Port 'C' Of Brake
Valve To Port 'C'
Of Hydraulic Tank
1 02-31 81 9-01
298-02095-62
298-02127-62
Hose Assembly 1/4' ID X 42 LG
90° SAE 0-Ring/37 ° Flare Adapt Valve
Male NPTF/37 Flare Adapt @ Tank
1
1
1
BL3
102-31248-04
Port 'A" Brake Valve
To Traction Pump
298-02095-62
Charge Pressure Gage Port 298-08184-86
Hose Assembly 1/4' ID X 15 LG
SAg O-Ring/37° Flare Adapt @ Valve
90 Sae O-Ring/37° Flare Adapt @ Pump
1
1
QTY
1
544-98
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - BRAKE VALVE
B0672
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - BRAKE VALVE
ITEM NO.PART NUMBERQTY.DESCRIPTION
1102-11971-01 1Brake Valve
Includes Items 2 Thru 8
2102-12273-51 1Nut
3102-11971-11 1Name Plate
4102-12273-091Coil
5102-11971-12 1Coil Housing
6102-12273-501Cover Plate
7102-11971-131Valve Assembly
8102-12273-11 1Seal Kt
9102-12273-391Valve Body
544-99
(N1291)
544-100
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - TRACTION MOTOR
102-12561-01
B0704
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-101
(NI291)
HYDRAULICS - ROLL DRIVE MOTOR
102-12869-01 SP600D
102-12870-01 SP600PD
B0705
544-102
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS - TRACTION PUMP
B0658
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-103
(N1291)
HYDRAULICS TRACTION PUMP
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1
102-12823-01
1
2
102-04365-02
1
3
4
5
102-12823-11
102-12823-12
102-12823-13
1
1
1
6
7
8
9
10
102-11465-27
102-10458-12
102-12823-14
102-12823-15
102-12823-16
1
2
1
1
1
Spring
0-Ring
Stationary Sea!
Rotating Seal
Control Kit W/Neutral Start
Consisting Of Items 11 Thru 17
11
12
13
14
15
102-11218-14
102-11461-105
102-11218-20
102-11218-21
102-11218-16
1
1
1
1
9
Gasket
Control Handle
Lockwasher - Sawtooth
Nut
Screw
16
17
18
102-04365-50
102-04365-51
102-12823-17
9
3
1
19
20
102-12823-18
102-11469-40
4
4
Lock Washer
0-Ring
Charge Pump Kit
Consisting Of Items 19 Thru 23
Screw
Washer
21
22
23
24
25
102-12823-19
102-12823-20
102-12823-21
102-11461-104
102-12823-22
1
1
1
1
1
Pilot
Coupling
Gasket
Control Screen Filter
Orifice
26
27
102-12823-23
102-04365-12
1
2
Neutral Switch
Check Valve
Pump - Variable Displacement
Includes Items 2 Thru 23
Seal Kit
Consisting Of Items 3 Thru 9
Seal Retainer
Retaining Ring
0-Ring
544-104
(N1291)
REX Model SP-600D an SP-600PD Vibratory Roller (Silver Series)
HYDROSTATIC TRANSMISSION AXLE DRUM BRAKES AND MOUNTING
,
B0460
544-105
(N1291)
HYDROSTATIC TRANSMISSION, AXLE, DRUM BRAKES AND MOUNTING
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series) ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-09186-80 1Differential Assy
2298-00114-93 311/2" X 1-1/2" CS HT Unc
3298-20000-39 44Washer, Lock
4102-30479-01 2Cover
5102-10746-01 4Shim .020
5a102-10746-03 6Shim .007
6102-10746-026Shim
6a102-09822-01 2Spacer
7298-00349-022Bearing Cup
8298-00350-022Bearing Cone
9102-04803-01 2Shaft, Pinion Gear
10298-03115-68 2Oil Seal
11102-10746-01 2Shim .020
12398-02002-2981/2" X 2-1/4" Brt CS
13298-02035-71 63/4" Locknut
14398-20000-42 63/4" Lock Washer
15102-09804-01 2U-Bolt
16398-20000-37 83/8" Lock Washer
17298-00104-9383/8" X 1" Capscrew
18298-00036-9783/4" Washer-cut
19298-00130-93 83/4" X 2" HT Zn PI CS
20102-30459-01 1Gear Box Cover
21502-06459-80 1Gear Box/motor Mnt
22398-14005-7623/4" Sq Plug
23402-02646-021Gear Box
24298-00005-7116Nut, Wheel Bolt
25298-04037-4716Wheel Stud
25a102-09803-01 6Shim 22 Gauge
5Shim
2658486-5
2
Hub Cap
26a298-04006-47
2
3/16"
X 3" Cotter
27398-03000-26
1-1/2"
1
Sae Nut
27a398-11000-47
1
Washer
28102-09802-01
29402-01768-02 2Hub Wheel
30298-03115-68 1Oil Seal
31102-30455-01 1Retainer
2Shim
3258486-20
33298-00351-022Bearing Cup
34298-00352-022Bearing Cone
35102-09800-01 2Spacer
36398-06001-8725/8" X 5/8" X 2-1/2" Str Key
37102-04780-01 1Axle Shaft
38402-02639-021Gear Wheel End
39102-09798-01 2Spacer
5Shim
4058486-20
3Shim
40a58486-7
544-106
(N1291)
REX Model SP-600D and SP-600PD Vibrarory Roller (Silver Series)
HYDRAULICS - HYDRAULIC TANK ASSEMBLY
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
HYDRAULICS HYDRAULIC TANK ASSEMBLY
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1102-10886-01 1Gasket - Hyd. Tank
2502-04976-80 1Cover Hyd. Tank
3102-07320-01 1Cap Filler
4502-09434-80 1Hydraulic Tank
, 5298-02108-561 •Sight Plug
6298-08001-89 1Air Breather
7298-00105-93 83/8" X 1-1/4" HT CS
8298-02065-71 83/8" Locknut
9298-00133-53 1Oil Filer
544-107
(N1291)
544-108
(N1291)
REX Model SP-600D old SP-600PD Vibratory Roller (Silver Series)
POWER UNIT - ENGINE
B0707
B0708
0 0
0
43
41
11
10
9
3,4 5,6,7
0
B
10
11
38
37
34
32
31
REXModel SP-600D and SP-600PD Vibratory Roller (Silver Series)
POWER UNIT
-
ENGINE
ITEM NO. PART NUMBER QTY.DESCRIPTION
1102-31557-01
2102-31571-01
3102-31572-01
4298-00124-93
5298-00126-93
Engine Model 4039T
1
1Front Engine Mount-Right
1Front Engine Mount-Left
25/8" X 1-3/4" HT ZN CS
25/8" X 2-1/2' HT ZN CS
6398-11000-23 25/8" Unc Nut
7398-20000-41 45/8" Lock Washer
8502-30074-80 1Rear Engine Mount-Right
9502-30073-80 1Rear Engine Mount-Left
10298-00114-93 81/2" X 1-1/2" HT ZN CS
11398-20000-39 121/2" Lock Washer
12102-04791-01 1Flywheel Adapter
13398-20000-12 243/8" Lock Washer
14102-03666-01 1Hyd Pump Adapter
15102-05363-01 1Drive Plate
16398-02076-21 85/16" X 1-1/2" HT CS
17102-07361-01 8Joint
18298-00181-93 123/8" X 1" Soc CS
19402-00624-05 1Hub-Drive
20102-12823-01 1Hyd. Pump
21398-20000-2521/2" Cut Washer
22298-00115-93 121/2" X 1-3/4" HT ZN CS
23298-02066-56 1Oil Pressure Sending Unit
24102-09835-01 1Fan Spacer
25398-02005-16 45/16" X 1-3/4" HT CS
26398-95001-81 185/16" Lock Washer
27298-02067-56 1Water Sending Unit
28298-05207-921Fan Blade Assembly
29298-00263-471Ball Joint
30398-11000-37 11/4" Unf Nut
31298-00146-47 2- Cable Clamp Bracket
32398-10000-64 41/4" X 3/4" Rd Mach Screw
33102-31534-01 1- Throttle Cable Bracket
34398-11000-16 8#10-24 Hex Nut
35398-99004-352 FT1/4" Dia Copper Tube
36398-20001-50 85/16" Cut Washer
37398-20001-25 41/4" Lock Washer
38398-11003-47 41/4" Hex Nut
39398-02005-77 65/16" X 3/4" HT CS
40102-12843-021Throttle Cable
41102-12469-01 1Upper Radiator Hose
42298-05758-68 1Lower Radiator Hose
43298-09027-86 4Hose Clamp
44298-00106-93 123/8" X 1-1/2" HT ZN CS
544-109
(i'11291)
544-110
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
EXHAUST ASSEMBLY
ITEM NO. PART NUMBER QTY.DESCRIPTION
1298-05268-92 1Stack Pipe
2298-05288-92 245 Deg Elbow
3298-05261-92 1Muffler
4298-00432-47 7Exhaust Clamp
5298-05266-921Elbow
6298-05289-92 1Connector
7102-12448-02 1Muffler Support
8298-05264-92 1Flex Exhaust Connector
9502-30051-801Exhaust Flange & Elbow
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
AIR CLEANER ASSEMBLY
ITEM NO.PART NUMBER QTY.DESCRIPTION
1102-09209-01 1Air Cleaner
2298-05126-922Mtg Band Air Cleaner
3298-05271-92 1Air Inlet Hood
4298-05270-921Rubber Reducer
5102-12421-011Intake Tube
6298-09026-862Clamp
7298-09015-865Clamp
8502-30052-80 1Intake Tube
9298-06509-681Air Cleaner Indicator
10298-05269-92 245 Deg Rubber Elbow
544-111
(N1291)
544-112
(1\1'1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
FUEL TANK ASSEMBLY
ITEM NO.PART NUMBERQTY.DESCRIPTION
1502-06452-80 1Fuel Tank
2502-01341-87 1Hose Assembly - Inlet
3502-01338-98 1Hose Assembly - Return
4298-00106-93' 33/8" X 1-1/2" HT CS
5398-20000-37 33/8" Lock Washer
6398-11000-19 33/8" Nut
7298-02083-56 1Fuel Ending Unit
8298-02511-68 1Gasket Sending Unit
9298-00175-47 1Gas Cap
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
DRIVE TRAIN ASSEMBLY
ITEM NO. PART NUMBER QTY.DESCRIPTION
1502-06459-80 1Gear Box & Motor Mt Strut
2298-06075-91 1- Universal Joint Assembly
3102-31562-01 1Companion Flange
4502-20729-80 1-- Bracket
5102-12521-01 1Torque Hub
6398-02002-19 81/2" X 1-1/4" HT CS
7398-20001-13 10- 1/2" Cut Washer
8102-12750-01 1Hyd Disc Brake
9298-00367-9321/2" X 5-1/2' HT CS
10102-12561-01 1Hyd. Motor
11102-12499-01 1Sleeve
12102-12498-01 1Washer
1329-800103-9323/8" X 3/4" HT CS
14398-20000-12 23/8" Lock Washer
15298-08178-8621-5/16" 0-Ring X 1-5/16 Elbow
16298-08339-8613/4" 0-Ring X 7/8" Elbow
17298-02139-62 11/2" X 1-1/5" Conn
18298-06635-86 13/4" 0-Ring X 1/2" Pt Elbow
, -
-
544-113
(N129!)
544-114
(N1291)
REX Model SP-600D and SP-600PD
AXLE - DIFFERENTIAL
I/
ibratoty Roller (Silver Series)
B0461
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
AXLE DIFFERENTIAL
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1
2
3
4
5
*
*
*
102-09795-10
102-09795-11
1
1
Gear & Pinion Assy
Kit Inner Pinion Brg
Shim,drive Pinion Adjusting
Baffle,pinion Bearing
Shim,pinion Brg Adjusting
6102-09795-121Kit-outer Pinion Brg.
Slinger,pinion Brg Outer
7 *
1
Seal
8102-09795-13
9102-09795-14 1Washer
10102-09795-151Nut
11102-09795-171Gasket
Shim,diff.brg.
12 *
Bolt
12
13102-09795-22
14102-09795-161Flange Bearing
15102-09795-231Kit Diff. Case Assy
16102-09795-21 1Kit Diff. Brg
Flange Half,diff. Case
17 *
Cap,diff.
Case
18 *
Diff.
Case
1
Shaft.
19 *
4
Pinion
20 *
2Gear,differential
21*
2Ring
22 *
2Plate
23 *
1Disc
24 *
1Disc, Dished
25 *
1Plate
26
Bolt
8
102-09795-26
27
Slip Diff.
1
Kit-limited
102-09795-24
28 Gear
Carrier
Cover
1
Kit
102-09795-25
29
1
Cover,carrier
*
30
31102-09795-181Plug
32102-09795-1910Bolt
1Case,differential
33*
34102-04803-01 2Pinion Gear-shaft
35102-09795-20 4Bolt
* = ITEMS NOT SOLD SEPARATELY
544-115
(N1291)
544-116
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
AXLE - WHEELS AND TIRES
B0497
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
544-117
(N1291)
AXLE - WHEELS AND TIRES
SP600D
ITEM NO. PART NUMBER QTY.DESCRIPTION
1298-03143-68 2Tire/Tube 16.9 x 24
(ALL WEATHER)
2502-20351-802Rim & Wheel
SP600PD
ITEM NO.PART NUMBER QTY.DESCRIPTION
Tire/Tube 16.9 x 24 (TRACTION)
298-06070-68 Rim & Wheel
502-20351-80
00
00
IN VEIDV IC3 DNIEI IM -1V011:11.0313
48
1‘)
0
ROL
tea..
-a
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
ELECTRICAL - WIRING DIAGRAM
ITEM NO.PART NUMBERQTY.DESCRIPTION
1212-00276-17
2298-05004-17
3298-05005-17
4102-12989-01
5602-03795-01
1
1
1
1
1
Key Switch
2 Amp Circuit Breaker
20 Amp Circuit Breaker
Wire Assembly
Frequency Meter
7298-06159-17 2Toggle Switch DPST
8298-06067-17 1Horn Push Button Kit
9298-00052-17 3Switch Shield
10602-10758-011Vib. Transducer
11298-06253-171Engine Temp Gauge
12298-06251-171Voltmeter Gauge
13298-03040-171Fuel Level Gauge
14298-03041-171Tachometer/Hour Meter
15298-02083-56 1Fuel Level Sending Unit
16298-02067-56 1Eng. Temp Sending Unit
17298-00103-17 2Magnetic Pick-Up
18102-13101-01 1Wire Assembly
19298-06543-171Solenoid Switch
20102-09149-021Horn
21298-03255-17 1Battery (Standard)
21A298-03256-17 1Battery (Cold Start)
22102-12258-01 4Lamp Assembly
23298-26087-17 3Connector-3 Wire Bullet
24298-16222-17 1Rheostat
25298-00124-171Knob
26102-12988-01 1Wire Assembly
27298-05568-17 1L!mit Switch
28102-31712-01 1Vib Control Module
29298-26026-178Wire Terminal For #10 Stud
30502-00205-80 1Cord Assembly
31298-00086-17 10Connector Solderless
32102-09859-031Wiring Harness
33102-31691-01 1Wire Set
34102-31690-01 1Wire Set
35102-50379-011Main Wire Set
36102-12985-01 1Wire Set (2 Daisy Chain)
37102-30526-01 ARWire
38298-02066-56 1Oil Pressure Sending Unit
39298-06252-17 1Oil Pressure Gauge
40102-09149-03 1Nut - Bracket
544-119
(N1291)
544-120
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
ELECTRICAL - WIRING DIAGRAM - (Continued)
ITEM NO. PART NUMBER QTY.DESCRIPTION
41
42
43
44
45
102-09149-04
298-26153-17
102-50409-01
102-50410-01
102-08523-01
1
1
1
1
1
Bracket
Tach. Terminal End
Wiring Harness
Wiring Harness
Battery Grd Cable
46
102-12843-03
1
Battery Pos Cable
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
CUSTOMER NOTES
544-121
(N1291)
544-122
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
ELECTRICAL - BATTERY
60661
CENTER
CONSOLE
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
ELECTRICAL BATTERY
-
ITEM NO.PART NUMBER QTY.DESCRIPTION
1298-03255-17 1Battery - 12 Volt
2102-08523-091Battery Cable - Positive
3102-08523-01 1Battery Cable - Negative
4502-02693-80 1Clamp - Hold Down
5298-02065-71 83/8" Flanged Locknut
6102-07766-01 2Bolt - Hold Down
7502-08689-80 1Battery Tray
8298-00104-93 63/8" X 1" Hex Hd CS
9102-09741-01 1Spacer - Wooden
544-123
(N1291)
544-124
(N1291)
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
OPTIONAL EQUIPMENT - ROPS ASSEMBLY
T
REX Model SP-600D and SP-600PD Vibratory Roller (Silver Series)
OPTIONAL EQUIPMENT ROPS ASSEMBLY
-
ITEM NO. PART NUMBER QTY.DESCRIPTION
1102-05549-01 1Rops 600
2298-00091-93163/4" X Z' CS
3398-20000-42 163/4" Lock Washer
4102-09623-01 1Seat Belt Kt
5298-00094-234CapScrew
6298-00039-9741/2" Hardened Washer
7298-02063-71 21/2"-13 Locknut Flgd
544-125
(N1291)
,`
.