Download TM-10-3950-263-14-and-P-3
Transcript
TM 10-3950-263-14&P-3 TECHNICAL MANUAL FOR CRANE, MOBILE, CONTAINER HANDING, TRUCKMOUNTED, 140-TON CAPACITY DED, FMC LINK BELT MODEL HC-238A, ARMY MODEL MHE 248, NSN 3950-01-110-9224 FMC CORPORATION CABLE, CRANE AND EXCAVATION DIVISION HEADQUARTERS DEPARTMENT OF THE ARMY 15 JULY 1985 TM 10-3950-263-14&P-3 This manual contains copyright material. Published with permission of FMC Corporation, Cable, Crane and Excavation Division TECHNICAL MANUAL No. 10-3950-263-14&P-3 HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, DC., 15 July 1985 OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS) FOR CRANE, MOBILE, CONTAINER HANDING, TRUCK MOUNTED, 140-TON CAPACITY DED, FMC MODEL HC-238A, ARMY MODEL MHE 248, NSN 3950-01-110-9224 REPORTING OF ERRORS You can help improve this manual. If you find any mistakes or if you know of a way to improve the procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications and Blank Forms), or DA Form 2028-2 located in the back of this manual direct to: Commander, U.S. Army Tank-Automotive Command, ATTN: AMSTA-MB, Warren, MI 48397-5000. A reply will be furnished direct to you. TM 10-3950-263-14 & P1 TM 10-3950-263-14 & P-2 TM 10-3950-263-14 & P-3 Operator’s Manual Service Manual (Maintenance Instructions) Parts Manual NOTE This manual is published to provide an authorized commercial manual for the use of the personnel to whom this Crane is issued. Crane Manufacturer: FMC Corporation Cable, Crane and Excavator Division This technical manual is an authentication of the manufacturers commercial literature and does not conform with the format and content specified in AR 310-3, Military Publications. This technical manual does, however, contain available information that is essential to the operation and maintenance of the equipment. i (ii-Blank) TM 10-3950-263-14&P-3 Warranty Standard Warranty Cable Cranes FMC CORPORATION, CABLE CRANE & EXCAVATOR DIVISION is hereinafter called the COMPANY The products manufactured by the COMPANY, exclusive of used or re-built machinery or equipment, are subject to the following warranty: (A) Warranty "ALL of COMPANY’s products are of high quality and are manufactured in conformity with the best commercial practices in the various lines. The COMPANY warrants all products manufactured by it to be free from defects in material and manufacture at the time of shipment for six (6) months from date of shipment or 1000 hours of operation, whichever shall occur first The COMPANY will furnish without charge, f.o.b Its factory, replacements for such parts as the COMPANY finds to have been defective at the time of shipment, or at the COMPANY’s option, will make or authorize repairs to such parts, provided that, upon request, such parts are returned, transportation prepaid, to the factory from which they were shipped. "This warranty shall not apply to any product which has been subjected to misuse, misapplication, neglect (including but not limited to improper maintenance), accident, improper installation, modification (including but not limited to use of unauthorized parts or attachments), adjustments, or repair Engines, motors, and any accessories furnished with the COMPANY’s products, but which are not manufactured by the COMPANY, are not warranted by the COMPANY but are sold only with the express warranty, lf any, of the manufacturers thereof THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED (INCLUDING THOSE OF MERCHANTABILITY AND FITNESS OF ANY PRODUCT FOR A PARTICULAR PURPOSE), AND OF ANY OTHER OBLIGATION OR LIABILITY ON THE PART OF THE COMPANY. (B) Limitation of Liability. "It is expressly understood that the COMPANY’s liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise, is limited to the furnishing of such replacement parts, and the COMPANY will not be liable for any other injury, loss, damage, or expense, whether direct or consequential, Including but not limited to loss of use, Income, profit, or production, or increased cost of operation, or spoilage of or damage to material, arising in connection with the sale, installation, use of, Inability to use, or the repair or replacement of, the COMPANY’s products The COMPANY reserves the right to make alterations or modifacations in their equipment at any time, which, in their opinion, may Improve the performance and efficiency of the machine. They shall not be obliged to make such alterations or modifications to machines already in service Any operation beyond rated capacity expressly prohibited In the operating Instructions or safety manual furnished with the machine, or any adjustment, or assembly procedures not recommended or authorized in the operating or service instructions shall void such warranty. Special Provisions The standard machine warranty is modified by special provisions in solicitation DAAEO7-80-B-5230. J07 EQUIPMENT WARRANTY J.7.1 Definitions Acceptance The word "acceptance" as used herein means the execution of the Acceptance Block and signing of a DD Form 250 by the authorized Government representative. Supplies. The word "supplies" as used herein means the end item and all parts and accessories thereof, furnished by the contractor, and any related services required under this contract. The word does not include technical data. J.7.2 Warranty. Notwithstanding Inspection and acceptance by the Government of the supplies furnished under the contract or any provision of this contract concerning the conclusiveness thereof, the contractor hereby warrants that the supplies are free from defects In design, material, and workmanship and will conform with the specifications and all other requirements of this contract for a period of 15 months from date of acceptance, as shown on the Material Inspection and Receiving Report (DD Form 250), or 1500 hours of operation, whichever occurs first. Equipment designated as Production Samples shall be treated as equipment delivered 1 of 5 iii TM 10-3950-263-14&P-3 Warranty at the time as the production units If a Safety Recall defect occurs during equipment warranty period, the contractor agrees to extend the term of the warranty by the period of time equal to the time period required to make necessary safety defect corrections Additionally, to the extent of the contractor or his supplier(s) provide to commercial customers a greater warranty for the supplies furnished therein, the contractor hereby likewise provides such greater warranty to the Government To the extent the terms of such greater warranty are inconsistent with or conflict with this warranty, the provisions of this warranty shall govern J.7 3 Remedies J.7.3.1 New Replacement Supplies With respect to defective supplies, wherever located, the warranty shall include the furnishing, without cost to the Government, F O.B contractor’s plant, branch or dealer facility, or F.O.B. original CONUS destination, or F.O.B. US Port of Embarkation, at the Government’s option, new supplies to replace any that prove to be defective within the warranty period. J.7.3 2 Corrective Action Options. In addition, the Government shall have the option (a) to return the equipment or parts thereof to the contractor’s plant, branch or dealer facility for correction, or (b) to correct the supplies itself When the Government elects to return the equipment or parts to the contractor’s plant, branch or dealer facility, the cost of labor involved in the correction of the defective supplies shall be borne by the contractor When the equipment or parts thereof are returned to the contractor for correction, the contractor shall bear all transportation costs to the contractor’s plant and return With respect to defective supplies, when the Government elects to correct them itself, the cost of labor involved in the correction of defects shall be borne by the Government. If the Government requires the assistance of Contractor personnel in disassembly/reassembly of items removed in connection with repair or replacement of defective parts, the Contractor will be reimbursed for labor at a rate to be negotiated between the Contracting Officer and the Contractor at the time of repairs. J 7 3.3 Notification If the Government elects to have warranty repair or replacement performed by the contractor, the Government shall deliver the parts or equipment to contractor’s local facility or dealership for warranty corrective repair or replacement. If the Government elects to effect warranty repairs or replacement itself, the contractor shall be notified in writing of repairs required under the warranty within 30 days after discovery of the defect. Within 10 days after receipt of such notices, the contractor shall submit to the Contracting Officer a written reommendation as to the corrective action required to remedy the defect. In any event, the Contracting Officer may, upon the expiration of the 10 day period set forth above, proceed with correction or replacement as set forth in the paragraph, Remedies, above, and the contractor shall, notwithstanding any disagreement regarding the existence of a breach of warranty, comply with the Contracting Officer directions related to such correction or replacement. After the notice, but not later than 30 days after receipt of the contractor’s recommendation for corrective action. The Contracting Officer will, In writing, notify the contractor of the parts used by the Government in repair or replacement and all other costs or expenses required for Government correction of warranty defect as set forth in the paragraph, Remedies, above. The contractor shall respond within 30 days after receipt of this notice, of his intention to furnish identified replacement parts and/or cost reimbursements to the Government. In the event It Is later determined that the contractor did not breach the warranty In paragraph, Warranties, above, the contract price will be equitably adjusted pursuant to the terms of the "Changes!" clause of the contract. Failure to agree to such an equitable adjustment or upon any determination to be made under this clause shall be a dispute concerning a question of fact within the meaning of the "Disputes" clause of this contract. The Contractor shall furnish with his proposal a listing of distributors, dealers, and franchise outlets where warranty claims may be exercised J.7.4 Decalcomania. A synopsis or simplified summary of the warranty coverage and its implementation will be printed on a decalcomania approximately 3" x 4" and shall be mounted In view of the operator as near as possible to the center of the instrument panel of each vehicle. On those vehicles requiring concealed markings and registration numbers said decalcomania shall be placed in a readable position on the engine side of the firewall. J.7.5 Rights. The rights and remedies of the Government provided In this clause are in addition to and do not limit any rights afforded to the Government by any other clause In the contract Exceptions To Warranty The following supplies are not covered under the 1500 hour or 15 month warranty: (1) Tires (2) Batteries (3) Light Bulbs (4) Windshield wipers (5) Electrical Wires (6) Lubricants (7) Filters. 2 of 5 iv TM 10-3950-263-14&P-3 Warranty Preparation Of Warranty Claims (1) Use warranty claim no 531 for all claims over $25 These forms are available at no charge from the factory (2) Claims less than $25.00 will not be processed. (3) Campaigns - A $25 00 minimum will be paid on all claims identified as a campaign and listing the campaign only on the individual warranty claim. (4) Delivery and applicable follow-up reports must be on file before warranty consideration will be given. (5) Warranty Claim must be typed and mailed to the manufacturing division where the particular machine was manufactured no later than 45 days after work is completed. Do not type on the reverse side of the warranty claim form. If additional space is required on the warranty claim form, attach an additional sheet. (6) The upper righthand corner of the claim must be completely and correctly filled out. Information about description of the job must also be furnished. (7) Under Section 1 and 2 of the warranty claim, explanation must be given covering problem as diagnosed and corrective action taken. The statement "installed or replaced" will not be accepted as a satisfactory explanation of the diagnosis of problem and corrective action taken. Neither will the statement making reference to a previous report be accepted in lieu of Information correctly filled out explaining the problem and correct action taken (8) Section 3 entitled "Name of Part(s) That Failed or Caused Failure" must be completely filled out to enable the factory to determine disposition of defective parts. The serial number of the replacement part is also required to ensure future warranty of the part replaced. (9) Section 4 of the claim entitled "Other" is reserved to list things not provided for elsewhere on the form. Examples A freight bill, outside purchase of parts, outside labor for machine shop, etc A copy of the paid invoice must accompany each claim. (10) Section 5 is to list Item number of part, description of part, quantity of part, Invoice number and cost covering parts claimed. (11) If part or parts were supplied from your "stock", type the word "stock" in the invoice section provided In Area 5. (12) If parts were ordered where a 5 or 10% added cost was assessed for emergency shipment, a copy of the Invoice must be attached. (13) If a large group of parts were ordered from the factory for warranty repair, a legible copy of the FMC invoice attached in lieu of filling out Section 5 if preferred. (14) If an Incorrect FMC part number is listed or a part claimed that cannot be identified, it will be eliminated from the claim and will not appear on the credit memo. (15) Section 6 and 8 are reserved for factory use only. Do not enter any Information in these areas (16) Section 7 under labor, type hours only. Returning Defective Or Failed Parts To The Manufacturing Division (1) Do not send defective parts to the factory. Hold all defective parts until information is received as to their disposition. If and when the parts are needed by the manufacturing divlsion, the manufacturing division will forward Instructions wither verbally or in writing and/or both. In all cases an A.T.R number (Authorization to Return and Authorization to Receive) will be assigned with shipping Instructions. A.T.R. 87 - - - is used by the Bowling Green plant. FMC Corporation Crane & Excavator Division U S. 31 W. South Bowling Green, Kentucky 42101 The Receiving Departments have orders not to accept any shipment of warranty parts without an A T.R number clearly displayed on all parts, shipping cartons, tags, bills of lading and other papers required by transportation companies. If the part to be returned is a large item that cannot be crated (Example: boom sections, large hydraulic cvlinders, frames, counterweights, etc ) It will be necessary to have the A.T R number legibly marked or sainted with some waterproof marking device If it is a part that is apt to be rolled over, It is required that the number be marked on two or more sides of the component. (2) Parts must be returned In clean condition. Hydraulic parts must be sealed to prevent contamination. Any parts received without covering port plugs, etc., will not be inspected or forwarded to the vendor as vendors refuse any warranty consideration of hydraulic components not properly protected. (3) Shipping of parts for more than one claim in one shipment is discouraged. However, if for some reason or other, this must be done than each individual part must be Identified by item number, claim number and A.T.R. number. 3 of 5 V TM 10-3950-263-14&P-3 Warranty Submitting Of Warranty Claims (a) Prepare claim as outlined under "PREPARATION OF WARRANTY CLAIMS" (b) Distribute copies as follows Copy #1 White Copy #2 Yellow Copy #3 White Copy #4 Pink Copy #5 Green ( ( ( ( ( Copy #6 Blue ( Forward copies to the Manufacturing Division responsible for the model involved. For your assistance we are listing below the mailing address of each of the models manufactured. Government copy. Copy should be retained for your records. (c) You will be advised on the disposition of any alleged defective parts. (d) Approximate time for processing claims that are within the time frame of normal warranty will fall in the following categories (1) If material is not required for Inspection, the claim will be accepted or rejected within 45 days of receipt of the r3 copy. The Government will assume the responsibility for destroying and scrapping related parts under the direction of the Warranty Supervisor. (2) If material is required for Inspection, the claim will be accepted and credit issued within 45 days of receipt of the part or parts at the factory or a designated location. If Inspection reveals the part or parts were not defective, the factory will re-invoice the Government to cancel the credit previously issued (3) Government will be notified by phone followed by confirming letter with shipping instructions for alleged defective parts. If parts not received within 3 days a follow-up letter will be sent to distributor If parts not received within 30 days after follow-up letter mailed, warranty claim will be cancelled. (4) A disputed warranty settlement must be presented in writing to Construction Equipment Distribution Operation, 2800 Lakeside Drive, Bannockburn, Illinois 60015, Attention’ Service Department, no later than 45 days after the warranty claim status report is dated If the Government does not reply to FMC within the 45 day time frame, the warranty claim will not be opened to any further discussion at a later date Listed below are the mailing addresses and models for the Manufacturing Division. Direct claims to the attention of the Warranty Departments FMC Corporation Crane and Excavator Division Box 9500 Bowling Green, Kentucky 42101 Campaign Procedures (Safety Recall) A. Labor compensation for announced factory modification and retrofits Implemented by CCED. (1) FMC will compensate the Government 100% of its charge out rate which must be on record with the company at the time the claim is received, for performance of work related to the campaign (a) If FMC has established the work time required to effect the campaign, only the time so established will be recognized in establishing the amount of the claim. (b) If FMC has not established the hours required to effect the campaign, the company will accept actual documented time expended by the distributor, provided the time is reasonable and can be substantiated. B. Travel Time - Per Diem (1) FMC will compensate the Government at 100% of their charge out rate, on record with the company, for actual travel time expended In the performance of campaign work up to a maximum of eight hours (2) The standard 10% add-on clause, as found In the warranty labor program, will not apply to computing the credit amount on the warranty claim. (3) In addition to travel time, a reasonable per diem will be allowed for living expenses. Per diem receipts must accompany claim. 4 of 5 vi TM 10-3950-263-14&P-3 Warranty C. Overtime (1) Overtime charges will not be accepted, unless agreed to by the company prior to the performance of the work. D. Limits of FMC Responsblllty (1) FMC reserves the right to make alterations or modifications in their equipment at any time which in their opinion may improve the performance and efficiency of the machine. FMC shall not be obligated to make such alterations or modifications to machines already in service (2) FMC will not be under obligation to credit the Government with the price of the new part or to reimburse the Government for the labor cost for repairing or replacing defective part unless, within thirty (30) days of the date of the campaign work performed, the Government submits a typewritten claim listing parts used and the FMC allotted time provided in the campaign letter, or if FMC has not established the time, satisfactory proof of the time reasonably expended in repairing or replacing the defective part. (3) FMC will issue a minimum of $25.00 per claim. (4) Claims which cover campaign work performed on more than one machine will not be accepted. (5) The work must be completed within the time frame stated in the campaign agreement and campaign Instructions If campaign work is not completed within the stated time frame, FMC assumes no responsibility for any damage that might be incurred due to delay of campaign completion. E. Requirements for Qualification (1) The Government will utilize only qualified personnel in the performance of campaign work These personnel must have attended an authorized factory school on the particular product line within the past 18 months. (2) The Government must maintain properly equipped service vehicles and shop facilities as dictated by general industry standards. (3) The Government must have any specialized material, equipment, and tools, required by general industry standards. (4) The Government must maintain a current and updated service library; including service manuals, bulletins, policy handbook, parts books, and/or microfilm. 5 of 5 vii/viii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A276 3A277 3A280 3A281 3A282 3A283 3A288 3A290 3A291 3A292 3A293 3A351 3A352 3A355 3A356 3A358 3A359 3A521 3A544 3A552 3A576 3A577 3A585 3A592 3A619 3A638 3A664 3A665 3A682 A690 3A691 3A693 3A694 3A695 3A696 3A697 3A699 3A700 3A704 3A705 3A707 3A709 3A711 3A712 3A715 3A717 3A719 3A722 3A723 3A725 Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Racine Fuller Mech. Universal Mech Universal Mech Universal Fuller Racine Fuller Fuller Fuller Fuller M R C Bearing Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77521 73460 76260 76260 76260 73460 77521 73460 73460 73460 73460 21933 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 28295 32480 32200-19 32201-8 32485 32225 34054 34060 44956 67026 71006 415039 32254 69011 65987 28292 G127709 407338 1684 6-8002 114-8205 114-9014 1642 406440 6168 8879 13948 13949 311-MG 19462 15114 15131 19463 15128 18709 18708 15116 15117 62512 X-14-250 9293 14370 14494 14506 34002 6392 15758 14282 14283 14310 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-7-14 0 M1-5-6 0 M1-7-14 0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6 0 M1-5-6 0 M1-5-6.0 M1-7-14 0 M1-5-6.0 M1-5-5 0 M1-7-14 0 M1-5-6 0 M1-43-22 0 M1-61-7 0 M1-22-45 0 M1-22-45 0 M1-22-45 0 M1-19-36 0 M9-1-11 0 M1-18-36 0 M1-18-36 0 M1-19-36 0 M1-19-36 0 M1-18-36 0 M1-18-33 0 M1-18-33 0 M1-18-33 0 M1-18-33 0 M1-18-33.0 M1-18-33 0 M1-18-33.0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-33 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 1 of 22 ix TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A726 3A727 3A731 3A732 3A733 3A735 3A738 3A740 3A741 3A742 3A743 3A744 3A746 3A747 3A748 3A749 3A753 3A757 3A761 3A762 3A764 3A769 3A774 3A775 3A776 3A779 3A780 3A781 3A782 3A784 3A786 3A790 3A791 3A792 3A810 3A835 3A836 3A844 3A849 3A850 3A851 3A852 3A853 3A854 3A855 3A857 3A858 3A868 3A871 3A874 3A883 Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller M.R C. Bearing Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 73460 73460 73460 73460 73460 73460 73460 73460 21933 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 14311 14317 14335 14361 14362 14651 85002 14366 211-MG 3220 6716 11066 13788 14441 13789 13790 14974 15276 14373 14575 8858 81504 3230 3233 4425 51006 A-2268 8968 10019 6579 15918 17177 14658 14659 14291 12845 12880 7935 7992 14337 14961 15532 16724 17097 14327 14347 14765 15120 K-1644 14631 16717 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36.0 M1-18-33.0 M1-18-33.0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-19-36 0 M1-19-36 0 M1-19-36.0 M1-19-36 0 M1-19-36 0 M1-19-36 0 M1-19-36 0 M1-18-36 0 M1-18-36 0 M1-61-7 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-33 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-61-7 0 M1-18-36.0 2 of 22 x TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A884 3A885 3A887 3A889 3A891 3A895 3A896 3A898 3A899 3A900 3A911 3A915 3A916 3A917 3A919 3A922 3A925 3A928 3A932 3A934 3A937 3A940 3A942 3A951 3A952 3A953 3A954 3A955 3A956 3A957 3A958 3A960 3A961 3A962 3A963 3A964 3A965 3A966 3A968 3A971 3A984 3A1076 3A1087 3A1089 3A1091 3A1094 3A1100 3A1102 3A1107 3A1109 Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Vickers Vickers Vlckers Vlckers Vickers Vickers Vlckers Vickers Vickers Vlckers Vickers Vickers Vickers Vickers Vickers Vicers Racine Ross Gear Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 77521 77640 03504 03504 03504 03504 03504 03504 03504 03504 03504 14897 X-1-1008 A-3697 14832 11956 14341 14344 14349 14367 14621 14644 K-1567 81008 1966 A-3546 5202 14287 14205 X-1-603 1634 13952 13947 13951 922904 213984 923092 296599 922594 213859 213998 174619 222440 263585 193732 148423 250455 172376 199390 291667 406215 401236 104412 106998 107010 107735 108476 110036 118358 815566 123779 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-33 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-19-36.0 M1-18-36 0 M1-19-36 0 M1-19-36 0 M1-19-36 0 M1-10-18 0 M1-10-18.0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18.0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-43-22 0 M1-7-14 0 M1-24-79.0 M1-24-79 0 M1-24-79.0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-8.0 M1-24-83.0 3 of 22 xi TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A1115 3A1120 3A1121 3A1170 3A1173 3A1174 3A1253 3A1263 3A1264 3A1265 3A1266 3A1267 3A1268 3A1269 3A1271 3A1273 3A1284 3A1291 3A1310 3A1313 3A1325 3A1332 3A1360 3A1362 3A1363 3A1389 3A1419 3A1428 3A1430 3A1431 3A1432 3A1433 3A1447 3A1454 3A1455 3A1467 3A1468 3A1469 3A1470 3A1472 3A1474 3A1475 3A1476 3A1477 3A1478 3A1487 3A1489 3A1491 3A1493 3A1494 3A1495 Clark Equip Clark Equip. Clark Equip Clark Equip. Clark Equip. Clark Equip Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Hendrickson Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip Clark Equip. Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip Clark Equip Clark Equip. R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 03504 03504 03504 03504 03504 03504 28158 28158 28158 28158 28158 28158 28158 28158 28158 28158 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 356398 815328 101196 10J-12 25K60124 113249 AE-8904 BE-3350 AE-5000 AE-4992 AE-4059 BE-10358 AE-3416 BA-5919 32268-1A AE-29896 945127 121214 659764 102189 107660 111656 109041 101224 101223 600853 101222 107736 112588 106547 112295 112587 1F-740 118041 655673 112095 112096 110119 109125 119671 119719 119720 119721 119734 106923 118478 743263 675252 675263 815358 114351 M1-24-79.0 M1-24-83 0 M1-24-83.0 M1-24-41 1 M1-24-79.0 M1-25-8.0 M1-29-19.0 M1-29-19.0 M1-29-19.0 M1-29-19 0 M1-29-19.0 M1-29-19 0 M1-29-19.0 M1-4-20.0 M1-4-20.0 M1-4-20.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-22-45.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-24-79 0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-24-83.0 M1-22-45.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83 0 M1-24-83 0 M1-24-83 0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 4 of 22 xii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A1498 3A1499 3A1500 3A1501 3A1503 3A1504 3A1506 3A1507 3A1508 3A1515 3A1531 3A1533 3A1536 3A1537 3A1538 3A1540 3A1542 3A1543 3A1546 3A1547 3A1549 3A1552 3A1553 3A1554 3A1555 3A1557 3A1563 3A1566 3A1679 3A1691 3A1711 3A1724 3A1725 3A1726 3A1782 3A1784 3A1789 3A1793 3A1796 3A1797 3A1798 3A1799 3A1800 3A1801 3A1802 3A1803 3A1805 3A1807 3A1809 3A1818 3A1822 Clark Equip. Clark Equip. Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Vickers Fuller Fuller Clark Equip Clark Equip Clark Equip Ross Gear Ross Gear Ross Gear Fuller Fuller Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 73460 73460 03504 03504 03504 77640 77640 77640 73460 73460 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 109035 675262 743264 110727 784477 118051 672009 755873 121241 64D-09 109609 294050 1866 1586 212683 213982 315934 222029 32559 171523 170072 245507 276396 154364 923951 1606 1884 2237 12H-15 1 C924 11E-135 402199 475152-A1 G9409107 X-8-802 X-7-706 525 401219 28015 25084 25003 21200 62005 025031 HPS705012 HPS709004 HPS706003-A1 37014 G169108 415340 28299 M1-24-83.0 M1-24-83.0 M1-24-83 0 M1-24-83 0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-79.0 M1-10-18 0 M1-10-18 0 M1-10-18.0 M1-10-18 0 M1-10-18.0 M1-10-18 0 M1-10-18 0 M1-10-18.0 M1-10-18.0 M1-10-18 0 M1-10-18.0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-61-7 0 M1-18-36 0 M1-24-79 0 M1-24-83 0 M1-24-79 0 M1-7-14 0 M1-7-14 0 M1-7-14 0 M1-18-36 0 M1-19-36 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6.0 M1-5-6.0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-5-6 0 5 of 22 xiii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A1823 3A1824 3A1826 3A1827 3A1832 3A1841 3A1842 3A1847 3A1851 3A1852 3A1853 3A1854 3A1855 3A1856 3A1861 3A1862 3A1863 3A1865 3A1866 3A1869 3A1878 3A1879 3A1880 3A1881 3A1883 3A1888 3A1891 3A1894 3A1895 3A1904 3A1908 3A1910 3A1912 3A1916 3A1917 3A1918 3A1919 3A1920 3A1921 3A1922 3A1923 3A1924 3A1925 3A1926 3A1927 3A1928 3A1929 3A1930 3A1931 3A1932 Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Vickers Vickers Vickers Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler Shuler R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 77640 77640 77640 77640 77640 32705 32705 32705 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 52304 20167 28312 28294 28293 456064-S1 232797 315433 229678 B-611 B-614-2 B-2022 B-624 B-627 B-683-1A B-723 B-724-1 B-1981 B-1281 B-1499 B-1766 B-1890 F-248-1 F-328-1 F-372 F-361 F-911-1 F-1556 F-118-5 F-118-6 F-1609-3 F-1353-1 F-1401 F-1431-1 T-163 X-1-114 X-1-204 X-1-205 X-1-206 X-1-210 X-2-204 X-4-205 X-4-206 X-4-208 X-4-211 X-4-306 X-8-205 X-8-281 X-8-286 X-8-331 X-10-255 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-5.0 M1-10-18 0 M1-10-18.0 M1-10-18.0 M1-3-29.0 M1-3-29.0 M1-3-29.0 M1-3-29 0 M1-3-29.0 M1-3-29 0 M1-3-29 0 M1-3-29.0 M1-3-29 0 M1-2-81.0 M1-3-29.0 M1-3-29 0 M1-2-81 0 M1-2-81.0 M1-2-81.0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81 0 M1-2-81.0 M1-2-81 0 M1-3-29 0 M1-3-29.0 M1-3-29 0 M1-3-29.0 M1-2-81.0 M1-2-81 0 M1-3-29 0 M1-3-29.0 M1-3-29.0 M1-3-29.0 M1-2-81 0 M1-3-29.0 M1-2-81.0 M1-2-81.0 . M1-3-29.0 6 of 22 xiv TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A1933 3A1935 3A1937 3A1938 3A1939 3A1940 3A1941 3A1951 3A1952 3A1953 3A1954 3A1955 3A1956 3A1957 3A1958 3A1959 3A1960 3A1961 3A1962 3A1963 3A1964 3A1965 3A1966 3A1993 3A1994 3A1995 3A1997 3A2001 3A2028 3A2035 3A2036 3A2066 3A2127 3A2132 3A2186 3A2765 3A2766 3A2871 3A2877 3A2878 3A2879 3A2890 3A2892 3A2893 3A2894 3A2895 3A2896 3A2898 3A2899 3A2905 3A2906 Shuler Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg. Chicago Mfg Chicago Mfg Ross Gear Racine Racine Vlckers Fuller Fuller Fuller Fuller Fuller Fuller Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip. Clark Equip Clark Equip. Ross Gear Ross Gear R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 52304 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 77640 71741 71741 71741 71741 71741 71741 71741 71741 77640 77521 77521 32705 73460 73460 73460 73460 73460 73460 03504 03504 03504 03504 03504 03504 03504 03504 77460 77460 X-15-303 477180 21193 G106261 25082 402265 G441197 480887 G274883 G159229 32308 26115 65985 29085 401254 28104 477113 #53 Automotive 32307 51043 91356-2250 456064-A47-1956 97505-A1S-1800 1006-0041 1006-0038 6007-0012-12 1016-0019 2025-0018 1211-0012D 1209-0014D 1209-0034 402211 407340 407339 96168 4881 4886 X-8-612 15899 15900 15917 109597 126247 126248 112213 119650 112216 112364 113481 401242 402223 M1-3-29 0 M1-5-5.0 M1-5-5 0 M1-5-5.0 M1-5-5 0 M1-5-5.0 M1-5-5 0 M1-5-5.0 M1-5-5.0 M1-5-5 0 M1-5-5.0 M1-5-5 0 M1-5-5 0 M1-5-5.0 M1-5-5.0 M1-5-5 0 M1-5-5 0 M1-5-5 0 M1-5-5 0 M1-5-5 0 M1-5-5 0 M1-5-5 0 M1-5-5.0 M1-16-0 0 M1-16-0 0 M1-16-0 0 M1-16-0.0 M1-16-0.0 M1-71-25 0 M1-71-25 0 M1-71-25 0 M1-5-6.0 M1-43-22.0 M1-43-22 0 M1-40-5.0 M1-61-7 0 M1-61-7 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-25-8.0 M1-25-8 0 M1-25-8.0 M1-25-8 0 M1-24-79 0 M1-25-8.0 M1-25-8.0 M1-25-8.0 M1-5-6 0 M1-5-6.0 7 of 22 xv TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A2907 3A2908 3A2911 3A2912 3A2913 3A2914 3A2915 3A2918 3A2919 3A2920 3A2921 3A2922 3A2923 3A2924 3A2925 3A2926 3A2927 3A2928 3A2946 3A2947 3A2948 3A2950 3A2951 3A2953 3A2954 3A2955 3A2956 3A2958 3A2959 3A2962 3A2964 3A2979 3A2980 3A2981 3A2982 3A2983 3A2988 3A2989 3A2997 3A2999 3A3001 3A3002 3A3003 3A3007 3A3010 3A3012 3A3013 3A3014 3A3015 3A3016 3A3017 Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Vickers Vickers Vickers Vlckers Vickers Vickers Vickers Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 77460 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 61038 32705 32705 32705 32705 32705 32705 32705 77640 77640 77640 77640 77640 77640 HPS703243 900 HP708110 508594 415180 415181 32200-24 36071 401253 28203 25088 21195-A1 32261 34055 415138 415354 415149 402204-A3 20486 20524 21017 21135 21153 21494 21512 21670 21669 21760 22019 23713 23937 24758 24759 24760 24761 24762 24874 24980 5881 229235 359287 280267 280372 294266 923487 32266 401199 403772-A1 403630 403631 403643 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6.0 M1-5-6 0 M1-5-6.0 M1-5-6.0 M1-5-6 0 M1-5-6.0 M1-5-6 0 M1-5-6 0 M1-5-6 0 M1-41-3.0 M1-41-3.0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3.0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3.0 M1-41-3.0 M1-41-3.0 M1-41-3 0 M1-41-3.0 M1-41-3.0 M1-41-3.0 M1-40-5.0 M1-40-5.0 M1-40-5.0 M1-40-5.0 M1-40-5.0 M1-40-5.0 M1-40-5.0 M1-5-8.0 M1-5-8.0 M1-5-8 0 M1-5-8.0 M1-5-8.0 M1-5-8.0 8 of 22 xvi TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A3018 3A3019 3A3020 3A3021 3A3055 3A3071 3A3072 3A3104 3A3105 3A3109 3A3111 3A3982 3A3983 3A3984 3A3985 3A3986 3A3987 3A3988 3A3989 3A3990 3A4236 3A4309 3A4482 3A4485 3A4486 3A4487 3A4488 3A4489 3A4491 3A4495 3A4496 3A4497 3A4500 3A4501 3A4503 3A4504 3A4506 3A4507 3A4508 3A4509 3A4510 3A4511 3A4512 3A4515 3A4516 3A4518 3A4545 3A4550 3A4551 3A4553 3A4555 Ross Gear Ross Gear Ross Gear Ross Gear Llpe-Rollway Lipe-Rollway Lipe-Rollway Hendrickson Hendrickson Hendrickson Hendrlckson Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Vickers Mech Universal Racine Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Fuller Fuller Fuller Fuller Fuller R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 77640 77640 77640 77640 36481 36481 36481 28158 28158 28158 28158 73460 73460 73460 73460 73460 73460 73460 73460 73460 32705 76260 77521 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 73460 73460 73460 73460 73460 403644-1293 403669 403682 403703-1293 C25-46 140-6-788 140-6-789 AE-11778 CA-7387 AE-21867-23 AE-22962-1 15313 16375 16385 16386 16387 16388 A3925 A-3940 A-3941 331807 42-18092-1 995752-E7 106357 106358 106356 106359 106355 10F-2 110552 110553 110622 121494 112028 658994 791554 658979 1300428 110559 118786 122024 224023 106457 660516 107739 1F-416 16405 16566 S-1340 62504 16516 M1-5-8.0 M1-5-8.0 M1-5-8.0 M1-5-8.0 M1-17-20.0 M1-17-20 0 M1-17-20.0 M1-29-19.0 M1-29-19.0 M1-4-20.0 M1-4-20.0 M1-19-36.0 M1-19-36 0 M1-19-36.0 M1-19-36.0 M1-19-36 0 M1-19-36.0 M1-19-36.0 M1-19-36 0 M1-19-36 0 M1-40-5 0 M1-22-45 0 M1-43-22 0 M1-24-41 1 M1-24-41.1 M1-24-41.1 M1-24-41 1 M1-24-41.1 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79.0 M1-24-79 0 M1-24-79.0 M1-24-79.0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 9 of 22 xvii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A4566 3A4567 3A4568 3A4569 3A4570 3A4571 3A4573 3A4574 3A4577 3A4578 3A4581 3A4582 3A4583 3A4584 3A4585 3A4586 3A4587 3A4589 3A4590 3A4591 3A4592 3A4596 3A4597 3A4600 3A4603 3A4850 3A4851 3A4853 3A4854 3A4956 3A4968 3A4971 3A5061 3A5240 3A5241 3A5242 3A5245 3A5253 3A5257 3A5258 3A5259 3A5260 3A5322 3A5324 3A5326 3A5327 3A5328 3A5329 3A5330 3A5331 3A5332 Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Energy Mfg Energy Mfg. Energy Mfg. Energy Mfg Energy Mfg. Energy Mfg. Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Tulsa Winch Shuler Shuler Shuler Shuler Vickers Vickers Vlckers Vickers Racine Clark Equip. Clark Equip Racine Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Clark Equip. Clark Equip. Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip. R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 73460 73460 73460 73460 73460 73460 73460 73460 17913 17913 17913 17913 17913 17913 61038 61038 61038 61038 61038 61038 61038 52304 52304 52304 52304 32705 32705 32705 32705 77521 03504 03504 77521 73460 73460 73460 73460 73460 73460 73460 73460 73460 03504 03504 03504 03504 03504 03504 03504 03504 03504 18250 16310 16517 16519 16217 16723 55518 55523 81480 80335 XA-1823 XA-1824 XC-111 A-2481 24379 30687 30685 30243 23466 21775 21183 B-1833-1 B-1833-2 B-1824-1 F-1548-40A 308075 375095 375094 379062 493482 106232 121074 493419 55508 16596 16929 17109 A-4103 16775 16776 17072 17073 124305 117225 124988 113292 124431 118462 124284 815993 124288 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36.0 M1-18-33.0 M1-18-36.0 M1-45-48 0 M1-45-48.0 M1-45-48.0 M1-45-48.0 M1-45-48 0 M1-45-48.0 M1-41-3.0 M1-41-3 0 M1-41-3.0 M1-41-3 0 M1-41-3 0 M1-41-3 0 M1-41-3.0 M1-3-29 0 M1-3-29 0 M1-3-29 0 M1-2-81 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-10-18 0 M1-43-22 0 M1-24-79 0 M1-22-45 0 M1-43-22 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-24-41.1 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-24-79 0 M1-24-79.0 M1-24-79 0 M1-24-79 0 10 of 22 xviii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A5333 3A5334 3A5335 3A5338 3A5339 3A5342 3A5343 3A5344 3A5345 3A5352 3A5355 3A5356 3A5357 3A5391 3A5399 3A5458 3A5459 3A5460 3A5465 3A5466 3A5481 3A5483 3A5484 3A5496 3A5506 3A5509 3A5510 3A5511 3A5512 3A5513 3A5514 3A5525 3A5526 3A5532 3A5535 3A5538 3A5539 3A5542 3A5546 3A5547 3A5548 3A5549 3A5550 3A5554 3A5562 3A5567 3A5570 3A5572 3A5573 3A5574 Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Tulsa Winch Tulsa Winch Shuler Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 03504 61038 61038 52304 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 124286 109145 124287 231843 112695 124343 124084 123831 26E-14 123748 124306 123823 123821 16F-12 124063 125088 125578 125579 124363 124364 27735 31349 B-1824-2 S-1325 12815 16132 16131 16133 16135 16136 16134 16118 14711 14749 14750 16949 S-1341 16463 81548 16138 16953 16763 16628 17070 K-1546 15260 15954 16295 17106 16337 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79.0 M1-24-79 0 M1-24-82 0 M1-24-83.0 M1-24-83 0 M1-24-83 0 M1-24-41 1 M1-25-8 0 M1-25-8 0 M1-24-79 0 M1-24-80 0 M1-24-83 0 M1-24-83 0 M1-24-83 0 M1-24-83 0 M1-24-83 0 M1-41-3 0 M1-41-3 0 M1-3-29 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-18-36.0 M1-61-7.0 11 of 22 xix TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A5575 3A5579 3A5584 3A5586 3A5587 3A5588 3A5589 3A5590 3A5591 3A5592 3A5593 3A5594 3A5595 3A5596 3A5598 3A5599 3A5600 3A5601 3A5602 3A5603 3A5604 3A5605 3A5606 3A5607 3A5608 3A5609 3A5610 3A5611 3A5612 3A5613 3A5614 3A5615 3A5617 3A5618 3A5631 3A5632 3A5634 3A5635 3A5693 3A5694 3A5711 3A5712 3A5713 3A5714 3A5715 3A5717 3A5718 3A5725 3A5733 3A5738 3A5739 Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Racine Racine Racine Racine Racine Racine Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Ross Gear Chicago Mfg. Clark Equip Chicago Mfg. Clark Equip R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 77521 77521 77521 77521 77521 77521 77640 77640 77640 77640 77640 77640 77640 71741 03504 71741 03504 15932 15938 K-1004 12022 17423 17422 S-1347 16784 16770 17420 17421 17411 17419 17412 15241 81042 S-1005 17395 17396 X-7-650 81559 17397 17398 17399 17505 17402 17404 17403 17405 17406 17410 17407 A-4286 11364 999401 999434 400702 493573 707421 994268 28310 32282 32352 401291 C444009-A1 C445516-S1 C446003 1206-038 25E-21 125373 125599 M1-18-36.0 M1-18-36 0 M1-61-7.0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7.0 M1-61-7 0 M1-61-7.0 M1-61-7.0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7.0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-61-7 0 M1-43-22 0 M1-43-22 0 M1-43-22.0 M1-43-22.0 M1-43-22.0 M1-43-22.0 M1-7-14.0 M1-7-14 0 M1-7-14 0 M1-7-14 0 M1-7-14.0 M1-7-14 0 M1-7-14 0 M1-71-25.0 M1-24-79 0 M1-71-25.0 M1-24-79 0 12 of 22 xx TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A5740 3A5757 3A5761 3A5782 3A5827 3A5886 3A5887 3A5888 3A5889 3A5890 3A5891 3A6054 3A6118 3A6131 3A6159 3A6386 3A6863 3A6899 3A6902 3A6925 3A6926 3A6929 3A6932 3A7206 3A7207 3A7208 3A7317 3A7318 3A7465 3A7468 3A7469 3A7470 3A7471 3A7472 3A7485 3A7486 3A7487 3A7499 3A7500 3A7502 3A7503 3A7504 3A7505 3A7506 3A7507 3A7508 3A7509 3A7512 3A7513 3A7514 3A7515 Clark Equip Gunite Gunite Vickers Fuller Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip Clark Equip. Fuller Fuller Fuller Fuller Shuler Fuller Shuler Shuler Shuler Shuler Gunite Gunite Hendrickson Hendnckson Hendnckson Mech Universal Chicago Mfg Fuller Fuller Fuller Fuller Fuller Fuller Fuller Lipe-Rollway Shuler Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 03504 73972 73972 32705 73460 03504 03504 03504 03504 03504 03504 73460 73460 73460 73460 52304 73460 52304 52304 52304 52304 73972 73972 28158 28158 28158 76260 71741 73460 73460 73460 73460 73460 73460 73460 36481 52304 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 125776 WP37 WP545 280689 17560 126625 127808 127814 127815 127816 127817 1983 A-4388 14332 14504 B-1784-4A 17179 B-1794-1M F-1503-3 B-707-21 B-707-22 2762 WP457 BE-45163 AE-21867-9 BE-45289-E 6-9034 1208-122 14375 18271 18268 18270 18273 18272 17178 140-302-1064 FC-588-KX 1208-0129 1208-0126 1018-0069 1018-0053 1208-0133 1012-0034 5511-0140 #14 1205-0215 1209-0059 5223-0176 1012-0020 1011-0011 5208-0139 5511-0140 #13 M1-24-79 0 M1-2-81 0 M1-2-81 0 M1-40 5 0 M1-19-36.0 M1-24-83.0 M1-24-83 0 M1-24-83.0 M1-24-83 0 M1-24-83.0 M1-24-83.0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-3-29 0 M1-18-36 0 M1-3-29.0 M1-2-81 0 M1-3-29 0 M1-3-29 0 M1-2-81 0 M1-2-81 0 M1-4-20 0 M1-29-19 0 M1-29-19 0 M1-22-45 0 M1-71-25 0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36 0 M1-17-20 0 M1-2-81 0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-71-25 0 M1-71-25 0 M1-71-25 0 M1-71-25 0 13 of 22 xxi TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A7516 3A7518 3A7519 3A7521 3A7522 3A7523 3A7524 3A7525 3A7526 3A7527 3A7529 3A7530 3A7531 3A7533 3A7534 3A7535 3A7537 3A7538 3A7540 3A7541 3A7542 3A7543 3A7545 3A7546 3A7547 3A7548 3A7549 3A7551 3A7552 3A7556 3A7560 3A7620 3A7622 3A7624 3A7625 3A7626 3A7627 3A7628 3A7640 3A7648 3A7692 3A7693 3A8021 3A8022 3A8053 3A8054 3A8057 3A8058 3A8059 3A8060 3A8062 Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg Chicago Mfg. Chicago Mfg Chicago Mfg Chicago Mfg Chicago Mfg. Chicago Mfg. Chicago Mfg Chicago Mfg Chicago Mfg. Chicago Mfg Chicago Mfg Chicago Mfg. Chicago Mfg Chicago Mfg. Chicago Mfg Chicago Mfg Clark Equip. Clark Equip Clark Equip Clark Equip. Clark Equip Clark Equip Clark Equip Clark Equip Clark Equip Chicago Mfg Mech Universal Shuler Shuler Fuller Fuller Fuller Fuller Seats Inc Seats Inc Seats Inc Seats Inc. Seats Inc. R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 71741 03504 03504 03504 03504 03504 03504 03504 03504 03504 71741 76260 52304 52304 73460 73460 73460 73460 09704 09704 09704 09704 09704 1012-0014 1011-0088 1019-0025 1208-0136 1208-0135 1012-0063 1205-0062A 1037-0047 5215-0057 5524-0430 1220-0175 1204P-0034 1205-0037 1204P-0032 1205-0143 5524-0431 1219-0016A 1206-0028 1212-0026 1212-0027 1212-0028 1212-0029 1038-0036 5536-0255 1208-0038 1208-0039 1209-0024M 5205-0212 5202-0715 128315 126612 2C-1628H 86D-09 86D-10 126468 61 D09H 127601 112920 1203-2024 42-24180-1 1002980 F-1190-1 18385 18299 16493 16368 123703 123704 100441 100011 100440 M1-71-25 0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-71-25 0 M1-71-25.0 M1-71-25.0 M1-71-15.0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-71-25 0 M1-71-25 0 M1-71-25 0 M1-71-25.0 M1-71-25 0 M1-24-79 0 M1-24-79.0 M1-24-83.0 M1-24-83.0 M1-24-83.0 M1-24-83 0 M1-24-83 0 M1-24-83 0 M1-25-8 0 M1-71-25 0 M1-22-45.0 M1-2-81.0 M1-2-81.0 M1-19-36 0 M1-19-36 0 M1-19-36 0 M1-19-36 0 M1-72-12.0 M1-72-12 0 M1-72-12.0 M1-72-12 0 M1-72-12.0 14 of 22 xxii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A8063 3A8064 3A8065 3A8302 3A8311 3A8312 3A8314 3A8401 3A8402 3A8403 3A8408 3A8634 3A8635 3A8637 3A8671 3A8703 3A8706 3A8707 3A8714 3A8715 3A8933 3A8950 3A8976 3A9214 3A9355 3A9426 3A9565 3A9571 3A9576 3A9577 3A9579 3A9581 3A9582 3A9583 3A9584 3A9585 3A10021 3A10023 3A10029 3A10035 3A10048 3A10049 3A10050 3A10051 3A10052 3A10053 3A10054 3A10056 3A10057 3A10058 Seats Inc Seats Inc Seats Inc. Hendrickson Ross Gear Ross Gear Ross Gear Shuler Shuler Shuler Donaldson Fuller Fuller Fuller Fuller Fuller Fuller Fuller Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip Lipe-Rollway Clark Equip Hendrickson Clark Equip Fuller Fuller Fuller Fuller Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg Energy Mfg. Energy Mfg. Energy Mfg. Energy Mfg Energy Mfg. Vickers Tulsa Winch Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 09704 09704 09704 28158 77640 77640 77640 52304 52304 52304 18265 73460 73460 73460 73460 73460 73460 73460 03504 03504 03504 03504 03504 36481 03504 28158 03504 73460 73460 73460 73460 71741 71741 71741 71741 71741 17913 17913 17913 17913 17913 32705 61038 06853 06853 06853 06853 06853 06853 06853 100445 707339 300444 30625-7 C443809A1-1843 C444009-A2-1856 C444102-1856 B-1839 B-1790-25A B-1790-26A P12-9396 18269 18128 18153 18408 19198 X-7-1005 19258 2106732 2106730 64D-07H 19464 18408 K-259 1 C-720H BE-45289-2 816044 S-1364 19464 19451 4759 1203-2023 1203-2026 1203-2025 1203-2022A 5207-0165 81546 81470 80325 80305 A-174 923840 31664 202986 204781 227745 227746 241993 241996 241997 M1-72-12.0 M1-72-12.0 M1-72-12.0 M1-29-19.0 M1-7-14.0 M1-7-14.0 M1-7-14.0 M1-3-29 0 M1-3-29 0 M1-3-29 0 M1-63-65.0 M1-18-36 0 M1-61-7 0 M1-18-36 0 M1-61-7 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-24-79 0 M1-24-79 0 M1-24-79 0, M1-18-36.0 M1-61-7 0 M1-17-20.0 M1-24-79 0 M1-4-20 0 M1-24-83 0 M1-18-36 0 M1-18-33 0 M1-18-33 0 M1-19-36 0 M1-71-25 0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-71-25.0 M1-45-48 0 M1-45-48.0 M1-45-48.0 M1-45-48.0 M1-45-48.0 M1-10-18.0 M1-41-3.0 M1-27-127 0 M1-27-127.0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 15 of 22 xxiii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A1 0059 3A10060 3A10061 3A10062 3A10063 3A10064 3A10065 3A10066 3A10067 3A10068 3A10069 3A10070 3A10072 3A10073 3A10074 3A10075 3A10076 3A10077 3A10078 3A10079 3A10080 3A10082 3A10083 3A10084 3A10136 3A10143 3A10146 3A10147 3A10244 3A10245 3A10249 3A10270 3A10357 3A10358 3A10359 3A10517 3A10526 3A10588 3A10780 3A10866 3A10867 3A10868 3A10869 3A10870 3A10871 3A10872 3A10873 3A10874 3A10875 3A10876 3A10877 Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Mech. Universal Shuler Shuler Shuler Fuller Fuller Fuller Fuller Racine Racine Racine Chicago Mfg. Chicago Mfg. Clark Equip Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 76260 52304 52304 52304 73460 73460 73460 73460 77521 77521 77521 71741 71741 03504 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 241999 242000 242001 242002 242003 242004 242013 242018 242413 243023 243570 243682 246363 246369 246370 246371 246612 246614 246660 246673 246675 277263 282424 282432 42-25019-1 B-582-91 F-1433-56 F-1671-107X-FMC 19670 19671 A-4740 X-8S-604 493410 707656 708307 5110-0344-12 1024-0071 113246 16390 A-4820 19315 15939 A-4738 19283 X-8L-614 X-8-686 X-8L-616 19709 19690 X-8L-540 19288 M1-27-127.0 M1-27-127.0 M1-27-127 0 M1-27-127 0 M1-27-127.0 M1-27-127 0 M1-27-127 0 M1-27-127.0 M1-27-127.0 M1-27-127.0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127.0 M1-27-127 0 M1-27-127.0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127.0 M1-27-127.0 M1-27-127 0 M1-22-45 0 M1-2-81.0 M1-2-81 0 M1-2-81 0 M1-18-33 0 M1-18-33 0 M1-18-33.0 M1-18-36.0 M1-43-22.0 M1-43-22.0 M1-43-22.0 M1-71-25 0 M1-71-25.0 M1-25-8 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36 0 16 of 22 xxiv TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A10878 3A10879 3A10880 3A10881 3A10882 3A10883 3A10084 3A10885 3A10886 3A10887 3A10888 3A10889 3A10890 3A10891 3A10892 3A10893 3A10894 3A10895 3A10896 3A10897 3A10898 3A10899 3A10900 3A10901 3A10958 3A10959 3A10960 3A10961 3A10962 3A10963 3A10964 3A11010 3A11567 3A11622 3A11623 3A11624 3A11625 3A11626 3A11627 3A11628 3A11629 3A11630 3A11632 3A11633 3A11955 3A12018 3A12019 3A12020 3A12021 3A12025 3A12031 Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Fuller Clark Equip Clark Equip Clark Equip. Clark Equip. Clark Equip. Clark Equip. Clark Equip Fuller Ross Gear Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Bendix-Westinghouse Shuler Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 73460 03504 03504 03504 03504 03504 03504 03504 73460 77640 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 06853 52304 71741 71741 71741 71741 71741 71741 17453 K-1787 16978 19714 19642 19616 19268 19626 19632 81022 A-4729 A-4716 19629 19627 19633 19643 19779 X-12-602 A-4772 X-8L-809 X-8L-509 X8-724 19953 19600 2107619 2107627 2107625 17C-1248H 2107599 O1G-620H 2107629 X-8S-412 5042 237891 237886 237887 237892 233008 246367 240538 285110 241992 249245 214649 B-582-92 4002-0048 4002-0049 5015-0070 4022-0037 4018-0036 6007-0038 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36.0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-18-36 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-79 0 M1-24-80.0 M1-18-33 0 M1-5-8 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-27-127 0 M1-3-29.0 M1-16-0.0 M1-16-0 0 M1-16-0.0 M1-16-0.0 M1-16-0.0 M1-16-0.0 17 of 22 xxv TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3A12135 3A12524 3A12794 3A12905 3A12906 3A12907 3A12908 3A13015 3E124 3H219 Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Chicago Mfg. Racine Racine Donaldson R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 71741 71741 71741 71741 71741 71741 71741 77521 77521 P11-7331 1204-0061 5022-0038 5215-0060 1203-2027 1024-0034 1204P-33Q 1011-0156 407328 403292 18265 M1-71-25.0 M1-16-0.0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25.0 M1-71-25 0 M1-43-22.0 M1-43-22.0 M6-5-60.0 18 of 22 xxvi TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3J60 3J61 3J62 3J65 3J66 3J67 3J79 3J80 3J126 3J128 3J129 3J130 3J204 3J401 3J416 3J417 3J573 3J706 3J715 3J716 3J717 3J718 3J795 3J796 3J799 3J908 3J909 3J910 3J911 3J914 3J915 3J920 3J921 3J922 3J923 3J1431 3J1625 3J1626 3J3402 3J3511 3J3598 3J4252 3J4253 3J4254 3J4476 3J4477 3J4478 3J4479 3J4480 3J4481 3J4482 Vickers Vickers Vlckers Vickers Vlckers Vickers Vickers Vlckers Vickers Vlckers Vickers Vickers la Ind Hyds la Ind. Hyds. la Ind. Hyds. la. Ind. Hyds Racine Racine Gresen Gresen Gresen Gresen Racine Racine Racine Racine Racine Racine Racine Racine Racine Racine Racine Racine Racine la. Ind Hyds Vlckers Vickers Energy Mfg. Vickers Modular Control Modular Control Modular Control Modular Control Vickers Vlckers Vickers Vlckers Vlckers Vickers Vlckers R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 32705 16294 16294 16294 16294 77521 77521 02249 02249 02249 02249 77521 77521 77521 77521 77521 77521 77521 77521 77521 77521 77521 77521 77521 16294 32705 32705 17913 32705 54846 54846 54846 54846 32705 32705 32705 32705 32705 32705 32705 114139 114173 116644 172302 292085 154090 912031 912064 98653 119986 131485 129343 21-C5030618 22-C5032418 19-C5009334 20-C5034334 490309 407362 081 602 1136 1291 307781 307782 407191 222198 307738 307771 307774 307837 307844 407540 490313 711040 711041 15-A1306236 2281 290057 A-1838 345264 SK-10-2 RV4-10-F-0-20 CV1-10-P-0-15 12-113 2706 309199 347397 373117 373118 421286 421288 M7-5-1.0 M7-5-1 0 M7-5-1 0 M7-5-1.0 M7-5-1.0 M1-40-5.0 M7-5-1.0 M7-5-1 0 M1-40-5.0 M7-5-1 0 M7-5-1.0 M7-5-1.0 M9-2-30.0 M9-2-30 0 M9-2-30 0 M9-2-30.0 M1-43-22 0 M1-43-22 0 M7-3-2.0 M7-3-2 0 M7-3-2.0 M7-3-2 0 M9-1-11 0 M9-1-11.0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-1-11 0 M9-2-30.0 M1-40-5 0 M 1-40-5.0 M1-45-48 0 M7-5-1 0 M1-46-30.0 M1-46-30 0 M1-46-30 0 M1-46-30.0 M1-40-5 0 M1-40-5.0 M1-40-5.0 M1-40-5 0 M1-40-5.0 M1-40-5 0 M1-40-5.0 19 of 22 xxvii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3J4483 3J4484 3J4485 3J4486 3J5026 3J5441 3J5442 3J5445 3J5983 3J5984 3J5985 3J5986 3J5987 3J5988 3J5989 3J5990 3J5991 3J5992 3J5993 3J5994 3J5995 3J5996 3J5997 3J5998 3J5999 3J6000 3J6001 3J6002 3J6003 3J6004 3J6005 Vlckers Vickers Vickers Vickers Energy Mfg. Vickers Vickers Vlckers Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross Cross R1184 Actual Manu. FSCM# Actual Manu. Part # Parts Page 32705 32705 32705 32705 17913 32705 32705 32705 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 11341 433024 433025 433026 433036 80715 154129 154127 028422 1V0081 1V1701 1V1703 1V1725 1R0017 4Z4306 1A0290 1A0291 1A0292 1A0294 1A0709 1A0711 1A0744 1A0757 2A0079-404 2A0079-406 2A0283-7214 2A0354-121 1V0209 1V0089 2A0283-9916 2A0007-022 2A0238-9022 M1-40-5 0 M1-40-5 0 M1-40-5.0 M1-40-5.0 M1-45-48.0 M1-40-5.0 M1-40-5.0 M1-40-5 0 M7-8-198.0 M7-8-198.0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198.0 M7-8-198.0 M7-8-198.0 M7-8-198 0 M7-8-198 0 M7-8-198.0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 M7-8-198 0 20 of 22 xxviii TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3M382 3M384 3M386 3M387 3M388 3M389 3M391 3M393 3M394 3M395 3M396 3M397 3M398 3M399 3M400 3M401 3M402 3M403 3M404 3M405 3M406 3M499 3M501 3M502 3M503 3M508 3M578 3M579 3M580 3M581 Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel Miller Swivel S.E.Q. S.E.Q. S.E.Q. S.E.Q. S.E.Q. S.E.Q. S.E.Q. S.E.Q. S.E.Q. R1184 Actual Manu. FSCM # Actual Manu. Part # Parts Page 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 96509 * * M231-610015 M231-620040 M231-640036 M231-680006 M231-680011 M291-801010 M311-580096 M331-620020 M331-620030 M331-650044 M331-650098 M331-740001 M331-995763 M391-801015 M431-830003 M431-830010 M331-580055 M331-590033 M231-630018 M231-610009 M231-620003 128007 128029 128009 128027 128004 128081 128080 128079 128078 M18-4-7.0 M18-4-7.0 M18-4-6.0 M18-4-6.0 M18-4-7.0 M18-4-6 0 M18-4-7.0 M18-4-7 0 M18-4-7.0 M13-4-6 0 M18-4-7 0 M18-4-6 0 M18-4-7 0 M18-4-7 0 M18-4-6 0 M18-4-6.0 M18-4-6 0 M18-4-6 0 M18-4-6 0 M18-4-6.0 M18-4-6 0 M18-13-81 0 M18-13-81.0 M18-13-81.0 M18-13-81.0 M18-13-81.0 M18-13-81 0 M18-13-81 0 M18-13-81 0 M18-13-81 0 * * * * * * 21 of 22 xxix TM 10-3950-263-14&P-3 Parts List Vendor Annex List FMC Actual Part # Manu. Name 3N31 3N32 3N33 3N34 3N35 3N36 3N37 3N38 3N39 3P208 3Q525 3R297 3R298 3R299 3R300 3R305 3R337 3R338 3R339 3R340 3R341 Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Seats Inc. Chicago Mfg. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. Hupp Inc. R1184 Actual Manu. FSCM # Actual Manu. Part # Parts Page 09704 09704 09704 09704 09704 09704 09704 09704 09704 09704 71741 46522 46522 46522 46522 46522 46522 46522 46522 46522 46522 124122 126643 126644 126647 300691 326692 326647 707327 707623 707394 1209-0023N 60554-G1-1 60002-G2-1 61793-G1-1 61817-G1 61785-G1-1 1420-32-13 42-1420-13 1032-22-13 60775-G1 60601-G2 M3-2-15.0 M3-2-15.0 M3-2-15 0 M3-2-15 0 M3-2-15.0 M3-2-15 0 M3-2-15.0 M3-2-15.0 M3-2-15.0 M3-2-15.0 M1-71-25 0 M6-25-53.0 M6-25-53.0 M6-25-53.0 M6-25-53 0 M6-25-53 0 M6-25-53 0 M6-25-53.0 M6-25-53.0 M6-25-53 0 M6-25-53 0 *FSCM Number Not Available 22 of 22 xxx TM 10-3950-263-14&P-3 Parts Manual Key Sheet The key sheet is a list, identifying all major components on a machine. It is divided into general areas. The following areas are used with this machine. Example: 1-1-1.0 General Information Wheel Swing Horizontal 5-14 Two-Speed Planetary Bridle Boom Tubular 1-25 5-7 9-5 General Area Area 1 3 4 5 6 7 9 14 16 18 Description Rubber Tired Lower Upper Revolving Frame And Equipment Vertical Shafts Horizontal Shafts Upper Engine & Converter S-o-M System Boom Attachment Cab, House, Guards Wire Rope (Cable) Special Equipment Each area is divided into numerous sub areas. The following is an alphabetical index of sub areas used on this machine. Example: 1-1-1.0 Sub Area Alphabetical Index A Accumulator 7-1 Air Controls & Lines 1-27 Axle Front Rear B Bail, Boom Hoist Boom Angle Indicator Backstops & Supports Live Mast Tubular Extensions Tubular 9-3 Hoist Limiting Device Tubular Lights Tubular Brake Boom Hoist Front Drum Wheel Lines Boom Hoist Front Drum Rear Drum Swing Two-Speed Planetary Parking Pedals Rear Drum C Cab Carrier Upper - Operators 14-1 Dash Cable - Wire Rope Carrier Catwalk Chassis Chain Case Deep Sump Engine Drive Clutch Carrier 1-17 Carrier Controls Cylinder Drum Engine Controls Upper Guards Lines Boom Hoist Front Drum Master & Controls Rear Drum 1-2 Reverse 1-24 Two-Speed Planetary Pedals Counterweight Carrier 3-12 Removal Hydraulic 18-1 Upper Cylinder 9-9 Drum Clutch 9-9 Gantry (Live Mast) Hydraulic Outrigger Extend-Retract Jack 9-10 Counterweight Removal Pin Removal 6-44 D 9-3 Decals, Labels 5-8 Defroster Carrier 5-3 Upper 1-3 Differential Drive Train 5-8 5-3 E 5-4 4-5 Electrical 5-7 Carrier 1-30 Upper Cab 1-20 Upper Engine Engine 5-4 Detroit Diesel (GM) 1-71 1-73 16-4 1-1 14-5 1-1 6-38 6-37 1-19 5-9 5-9 6-17 6-5 14-4 5-8 5-3 6-17 5-4 5-1 5-7 1-20 1-74 3-10 3-3 5-9 9-2 1-37 1-45 1-46 3-10 1-82 18-9 1-16 6-25 1-24 1-22 1-68 6-48 6-47 1 of 3 xxxi TM 10-3950-263-14&P-3 Parts Manual Lower Upper Drive Chain Pinion F Filter S-o-M Sump Tank Float, Outrigger Frame Carrier Upper Revolving ’Fuel Lines Tank (Carrier) Tank (Upper) G Generator, Auxiliary Grease Lines Upper Frame H Head Machinery Tubular Boom Heater Carrier Upper Frame Hook Block Hydraulic Drive Detroit Diesel (GM) I Indicator Boom Angle Drum Rotation Instrument Panel, Upper L Lever, Control S-o-M Stand M Continued - General Information Upper 1-63 Pump 6-5 Hydraulic Outrigger 6-37 S-o-M 6-36 Upper Steering 7-2 Roller 1-39 Deflector 1-45 Tubular Boom Guard 1-1 Tubular Boom 3-1 Rotating Joint Clutch 1-12 1-12 Seat 3-14 Carrier Upper 18-10 Shaft Boom Hoist 3-11 Drive Carrier Front Drum 9-4 Rear Drum Reduction - Jack 1-16 Reverse 6-25 Swing Rotation Indicator 18-4 Swing - Vertical Solenoid 6-6 Stack Valve Steer Controls 18-1 Cylinder 5-10 Gear Hydraulic Controls 6-24 Pump Suspension Front 7-9 Rear 7-10 Swing Lock 7-4 1-40 7-5 1-10 R 9-14 9-8 5-9 S 1-72 3-2 5-8 1-22 5-3 5-4 5-2 5-1 5-10 4-3 1-43 1-6 1-7 1-5 1-9 1-10 1-4 1-29 3-6 T Mast (Gantry) Tubular Boom Throttle Tires & Rims Transmission Auxiliary Controls Lower Creeper Main 9-2 O Outrigger Hydraulic 1-38 P Planetary Carrier - Spider Two-Speed Power Supply S-o-M Power Take-Off - PTO Hydraulic Outrigger Pressure, Suction & Return Lines Lower 1-24 5-7 6-8 1-69 1-18 1-19 1-61 1-18 V Valve Bank Check Check - S-o-M Control 7-1 1-41 1-79 xxxii 7-8 1-44 7-2 7-8 TM 10-3950-263-14&P-3 Parts Manual Continued - General Information Four Way - Stack Hydraulic Outrigger - Lower Lock Relief Selector - S-o-M Solenoid Stack Swing Brake Unloading W Wheel Front Rear, Hub & Drum Wiper & Controls Carrier Upper Wiring Engine Detroit Diesel (GH) (Carrier) Detroit Diesel (GM) (Upper) Outriggers Wire Rope Guards Requirements Tubular Boom Specifications 1-43 1-47 1-44 7-3 1-43 5-14 7-2 1-3 1-28 1-16 6-26 1-66 6-47 1-38 14-3 16-4 16-0 After determining the area, and sub-area, look at the third set of numbers on the parts page code. This is the specific page number. Example: 1-1-1.0 Specific Page Number The parts page code number (Example: 1-1-1.0) appears at the upper R.H. corner of each page. The pages are in the book in numerical order, making it easy to find a specific page. 3 of 3 xxxiii/xxxiv TM 10-3950-263-14&P-3 KEY SHEET & GENERAL INFORMATION 1 of 4 xxxv TM 10-3950-263-14&P-3 KEY SHEET & GEN. INFO (continued) Model HC-238A Serial No.______________ AREA 1 - RUBBER TIRE LOWER AREA 1 - CONTINUED M1-1-75.0 M1-1-76.0 M1-2-81.0 M1-3-29.0 M1-4-20.0 M1-5-5.0 M1-5-6.0 Ml-5-8.0 M1-6-18.0 M1-7-14.0 M1-9-35.0 M1-10-18.0 M1-12-46.0 M1-12-51.0 Ml-16-0.0 M1-16-5.0 M1-17-20.0 M1-18-33.0 M1-63-62,6 M1-63-62,7 M1-63-62.8 M1-63-62.9 M1-63-62.10 M1-63-62.11 M1-63-62.12 M1-63-62.13 M1-63-62.14 M1-63-62.15 M1-63-62.16 M1-63-62.17 M1-63-62.18 M1-63-62.19 M1-63-62.20 M1-63-62.21 M1-63-62.22 M1-63-62.23 M1-18-36.0 M1-19-36.0 M1-19-57.0 Ml-22-45.0 M1-24-41.1 M1-24-79.0 M1-24-80.0 M1-24-83.0 M1-25-8.0 M1-27-119.0 M1-27-127.0 M1-29-19.0 M1-38-69.0 M1-38-95.0 M1-38-104.0 M1-39-96.0 M1-39-38.0 M1-40-4.0 M1-40-5.0 M1-41-3.0 M1-43-22.0 M1-44-4.0 M1-45-44.0 M1-45-48,0 Ml-45-51,0 M1-46-25,0 M1-46-30.0 M1-46-31.0 M1-61-7.O0 M1-63-62.0 M1-63-62.1 M1-63-62.2 M1-63-62.3 M1-63-62.4 M1-63-62.5 Lifting Sling Assy Carrier Front Axle Front Brake Front Suspension Steering Column Assy Steering Gear Assy Steering "U" Joint Steering Geometry Steering Cylinder Steering Hoses Steering Pump Assy Fuel Lines Fuel Tank Assy Heater & Defroster Heater Hoses Clutch Assy Air Valve & Regulator Filter Assy. ’ Main Transmission Transmission Control Clutch & Transmission Control Drive Train Assy Planet Spider Assy Front Rear Axle Assy Rear Rear Axle Assy Differential Carrier Assy Wheel Brake Assy Air Lines & Controls Safety Actuator Rear Suspension Outrigger Throttle Controls Bumper Outrigger Lines Outrigger Elec. Wiring Outrigger Hyd. Lines Hydraulic Reservoir Pump & Controls, Hyd. Outriggers Outrigger Pump Assy Power Take-Off Assy Valve Stack Assy Lock Valve Assy Outrigger Assy Beam Cylinder Assy Multiple Float Assy Outrigger Jack Cylinder Bumper Jack Check Valve Bumper Jack Cylinder Creeper Transmission GM6V-92TA Eng. Assy Cylinder Block & Air Box Drain Cylinder Head Engine Lifter Bracket Crankshaft Crankshaft Pulley M1-63-62.24 M1-63-62.25 M1-63-62.26 M1-63-62.27 M1-63-62.28 M1-63-62.29 M1-63-62.30 M1-63-62.31 M1-63-62.32 M1-63-62.33 M1-63-62.34 M1-63-62.35 M1-63-62,36 M1-63-62.37 M1-63-62.38 M1-63-63.0 M1-63-65.0 M1-63-68.0 M1-66-32.0 M1-66-82.0 M1-66-85.0 M1-67-24.1 M1-67-24,2 M1-68-64.1 M1-69-21.0 M1-71-25.0 M1-71-29.0 M1-72-12.0 M1-73-21.0 M1-74-8.0 2 of 4 xxxvi Flywheel & Flywheel Housing Connecting Rod & Piston Camshaft & Gear Train Balance Weight Cover Accessory Drive Valve Operating Mechanism Rocker Cover Fuel Injectors & Connections Fuel Pump Fuel Filter & Strainer Mechanical Governer Injector Controls Air Inlet Adapter Blower & Blower Drive Turbocharger Oil Pump Oil Distribution System Oil Pressure Regulator Or Relief Valve Oil Filter Oil Cooler Dipstick Oil Pan Water Pump Thermostat & Water By-Pass Tube Fan Exhaust Manifold Battery Charging Generator Starting Motor Tachometer Drive Engine Mounting Air Compressor Throttle Control Solenoid Ether Start Kit Carrier Eng. Throttle Air Intake Assy. Carrier Exhaust Assy. Engine Wiring Battery Box Assy. Hour Meter Assy. Light Wiring Rotary Warning Light Cab Wiring Iires And Rims Carrier Cab Left Side Panel Assy. Carrier Seat Carrier Cab Dash Bumper Counterweight Assy. TM 10-3950-263-14&P-3 (R783) KEY SHEET &GEN. INFO (continued) Model HC238A Serial No.______________ AREA 3 - UPPER FRAME, COUNTERWEIGHT, SWING LOCK, SEAT AND MASTS M3-1-63.0 Revolving Frame M3-2-15.O Operator’s Seat M3-6-33.O0 Swing Lock Control M3-10-74.0 Ctwt. & Remover Assy. M3-10-75.O0 Ctwt. Removal Cylinder M3-lO-82.0 Ctwt. Removal Lines M3-10-89.0 Ctwt. & Remover Assy. M3-ll-12.0 Upper Grease Lines M3-12-25.O 16 Part Bail M3-14-15.0 Fuel Tank & Lines AREA 6 - CONTINUED M6-5-60.11 M6-5-60.12 M6-5-60.13 M6-5-60.14 M6-5-60.15 M6-5-60.16 M6-5-60.17 M6-5-60.18 M6-5-60.19 M6-5-60.20 M6-5-60.21 M6-5-60.22 AREA 4 - VERTICAL SHAFT M4-3-31.0 Swing Shaft AREA 5 - HORIZONTAL SHAFTS, CLUTCHES, BRAKES PLANETARY’S & HYDRAULIC LINES M5-1-51.1 M5-1-54.0 M5-2-43.0 M5-3-26.0 N5-3-45.1 M5-4-31.O M5-4-54.1 M5-7-37.0 M5-7-79.0 M5-8-22.0 M5-8-74.0 M5-8-83.1 M5-9-15.1 M5-9-25.0 M5-9-44.0 M5-10-24.0 M5-12-40.0 M5-14-4.0 M6-5-60,23 M6-5-60.24 M6-5-60.25 M6-5-60.26 M6-5-60,27 M6-5-60.28 M6-5-60.29 M6-5-60,30 M6-5-60.31 Swing Reverse Lines Swing Reverse Shaft Reduction Shafts Front Drum Shaft Front Drum Lines Rear Drum Shaft Rear Drum Lines Planetary Brake Assy. Planetary Drive "Slow Down" Boom Hoist Shaft Boom Hoist Brake & Pawl Control Boom Hoist Lines Clutch Cylinder Assy. Clutch Rotating Joint Clutch Assy. Rotation Indicator Front & Rear Drum Brake Controls Swing Brake Assy. M6-5-60,32 M6-5-60,33 M6-5-60.34 M6-5-60,35 M6-5-60.36 M6-5-60,37 M6-5-60.38 M6-5-60,39 M6-5-60.40 M6-5-60.41 M6-6-38.0 M6-8-73.0 M6-8-81.0 M6-17-30,0 M6-17-30,0 M6-24-63,0 M6-24-68.0 M6-25-53.0 M6-25-60.0 AREA 6 - ENGINE, CHAIN CASE, ELECTRICAL M6-5-60.0 M6-5-60.1 M6-5-60.2 M6-5-60.3 M6-5-60.4 M6-5-60.5 M6-5-60.6 M6-5-60.7 M6-5-60.7 16-5-60.8 M6-5-60.9 M6-5-60.10 GM Eng. W/Torque Converter Engine Lifter Bracket Cylinder Block Air Box Drains Cylinder Head Crankshaft Crankshaft Front Cover Vibra tion Damper & CrankVibration Damper £ Crank-shaft Pulley Flywheel & Flywheel Housing Connecting Rod & Piston Camshaft & Gear Train M6-26-17.0 M6-26-20.0 M6-36-13.0 M6-37-9.0 M6-38-22.0 M6-44-19.0 M6-44-20.0 Balance Weight Cover Valve Operating Mechanism Rocker Cover & Ventilating System Fuel Injector Fuel Pump Fuel Filter, Fuel Connections & Fuel Lines Mechanical Governor Injector Controls Throttle Controls Air Inlet Housing Blower & Blower Shaft Oil Pump, Oil Pressure Regulator, & Oil Distribution System Oil Filter Oil Cooler Oil Filler Dipstick Oil Pan Water Pump Water Pump Cover Water Outlet Manifold Thermostat & Water By-Pass Tube Radiator, Water Connections & Fan Shroud Fan Exhaust Manifold & Connections Tachometer Drive Wiring Harness Starting Motor Battery Charging Generator Torque Converter Torque Converter Oil Filter Ether Start Kit Hyd, Pump Drive Eng. Shut Down Controls Hand S Foot Throttle In Cab Master Clutch Controls Master Clutch Controls Lower Control Panel Instrument Panel Hot Water Heater Hot Water Heater Installation Windshield Wiper (Upper) Lower Windshield Wiper Engine Pinion Engine Drive Chain Adjustable Chain Case Battery Lighting System Floodlight System 3 of 4 xxxvii TM 10-3950-263-14&P-3 (R783) KEY SHEET &GEN. INFO (continued) Model HC238A Serial No.______________ AREA 6 - CONTINUED AREA 16 - WIRE ROPE M6-47-17.1 Upper Wiring W/GM Engine M16-4-22.0 Wire Rope Requirements / M6-48-25.0 Cab Wiring AREA 18 - MISCELLANEOUS AREA 7 - S-o-M PRESSURE & RETURN, CONTROLS, & VALVES M18-1-2.0 Crane Boom Angle Indicator M18-4-6.0 45 Ton Hook Block M7-1-7.0 Accumulator Assembly M18-4-7,0 150 Ton Hook Block M7-1-23.0 Hydraulic Power Assembly M18-9-56.0 Decals And Labels M7-2-1.0 Unloading Valve M18-10-27.0 Light Panel Assy. M7-2-2.0 Check Valve M18-10-27,1 Cylinder Head Valve S Rocker M7-2-4.0 Relief Valve M18-10-27.2 Crankcase & Oil Base M7-2-29.0 0 il Filter Assy M18-10-27.3 Piston & Connecting Rod M7-3-2.0 Ctwt. Selector Valve M18-10-27,4 Crankshaft & Flywheel M7-4-101.1 Press. & Return Lines M18-10-27,5 Camshaft M7-4-144.0 Cab Plumbing M18-10-27.6 Gear Cover M7-5-1.0 GM Pump Assy M18-10-27,7 Oil System M7-8-94.0 Swing Control Valve M18-10-27.8 Governor M7-8-117.0 Control Stand Valve M18-10-27.9 Anti-Flicker & Stop Solenoid M7-8-153.0 Boom Hoist Kickout Valve M18-10-27,10 Fuel Transfer Pump & Injector M7-8-198.O Ctwt. Control Valve System M18-10-27.11 Fuel Filters M7-9-37.0 Master Clutch, Swing Brake M18-10-27.11 Fuel Filter Lock Controls M18-10-27.12 Air Cleaner M7-9-41.0 Pawl & Lock Controls M18-10-27.13 Air Housing M7-9-44.0 Control Levers M18-10-27.14 Generator M7-10-28.0 Control Stand M18-10-27.15 Control Box Assy. M18-10-28.0 Light Plant Exhaust Assy. M18-13-81.0 Overload Warning System AREA 9 - BOOM, JIB, BACKSTOPS & LIMITERS M9-1-8.0 M9-1-11.00 M9-1-15.1 M9-1-16.0 M9-2-27.0 M9-2-28.0 M9-2-30.0 M9-3-135.0 M9-4-55.0 M9-5-24.0 M9-9-41.0 M9-10-48.0 M9-14-15.0 Boom Foot Pin Removal Cyl. Boom Foot Pin Control Valve Boom Foot Pin Removal Lines Boom Foot Pin Live Mast Lines Boom Live Mast Mast Cyl. Assy. Wide Head Boom Assy. 6-Sheave Head Machinery Bridle Assembly Boom Backstop Boom Hoist Kickout Deflector Rollers AREA 14 - CAB, HOUSE, GUARDS M14-1-92.0 M14-1-124.0 M14-1-126,0 M14-2-24.0 M14-5-34.0 House Assembly Mirror Cab & Mount Left & Right Drum Guards Catwalk Assembly 4 of 4 xxxviii TM 10-3950-263-14&P-3 Parts List Lifting Sling Assembly R383 M1-1-75.0 (1 of 2) M1-1-75.0 TM 10-3950-263-14&P-3 Parts List R383 Lifting Sling Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 22A3086 22A3063 76P595 22A3067 28M648 lX4942 1 1 2 4 8 8 22A3089 22A3087 22A3058 1X3747 4 4 1 16 1X3837 16 1X3747 8 1X6 8 1X3837 8 22A3064 22A3085 22A1780 22A3083 18M273 1X4942 2 1 8 4 8 8 22A3075 22A3082 18M818 lX4942 4 4 4 4 3X307 1 FSCM No. Sling Assembly - Long (Rear of Machine) Beam 36422 Jaw Turnbuckle Angle 36422 Lock Pin 36422 Retaining Ring, External, High Carbon Spring Steel, 7/8" Shaft Diameter Pin 36422 Vertical Sling Beam 36422 Capscrew, Hex. Head, UNC Class 2A, Grade 5, 1" X 2-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Nylon Insert, UNC-3B, Rockwell C32, 1" Capscrew, Hex. Head, UNC Class 2A, Grade 5, 1" X 2-1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Nylon Insert, UNC-3B, Rockwell C32, 1" Beam 36422 Sling Assembly - Short Hitch Pin 36422 Pin 36422 Lock Pin 36422 Retaining Ring, External, High Carbon Spring Steel, 7/8" Shaft Diameter Lifting Arm 36422 Pin 36422 Lock Pin 36422 Retaining Ring, External, High Carbon Spring Steel, 7/8" Shaft Diameter Lifting Sling Assembly Kit (Contains All Parts Listed Above) M1-1-75.0 (2 of 2) 36422 36422 79136 36422 90483 72968 90483 86157 72968 36422 79136 79136 36422 TM 10-3950-263-14&P-3 Parts List Carrier R284 M1-1-76.0 (1 of 4) M1-1-76.0 TM 10-3950-263-14&P-3 Parts List R284 Carrier - Continued REF. PART NO. QTY. 1 1X4062 11 2 3 4 1X1351 22A3019 1X3809 152 1 199 5 6 7 8 9 10 1X3599 1X2574 18A4719 22A2035 18A4451 1X284 30 47 1 1 1 98 11 12 13 14 15 16 17 22A2018 1X3357 22A2660 22A2062 18A1637 18A1409 1X3808 1 2 1 1 4 4 36 18 19 20 21 18A2947 18A2948 18A2956 22A2022 1X285 AR AR 16 1 11 22 23 24 25 26 27 28 29 30 31 32 33 34 35 18A1709 18A4720 22A2057 18A4545 22A2023 22A2027 1X3717 19A2464 22A2019 22A2032 28A204 22A3032 22A363 1X2624 2 1 1 1 1 1 4 1 1 1 4 1 2 4 36 37 38 39 40 41 42 43 44 45 19A2468 19A1347 18A2990 22A362 1X3302 1X20 22A2068 22A360 22A3154 22A2066 2 2 2 2 24 24 1 2 1 1 DESCRIPTION Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Sheet Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" Fender Skirt Fender Rail Step Bolt, Round Head Square Neck, Steel, Zinc Plated, UNC-2A, 3/8" X 1" Sheet Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Cab Mount Floor Plate Bar Mud Flaps Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Shim, 16 Ga Shim, 12 Ga. Capscrew, Hex Head, UNC Class 2A, Grade 8, 1/2" X 2" Fender Support Bolt, Round Head Square Neck, Steel, Zinc Plated, UNC-2A, 3/8" X 1-1/4" Bubble Level Fender Skirt Sheet Sheet Fender Support Fender Support Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Battery Support Bracket Sheet Fender Rail Anchor Shackle Rear Fender Luggage Frame Bolt, Round Head Square Neck, Steel, Zinc Plated, UNC-2A, 3/8" X 1-3/4" Support Bracket Luggage Frame Luggage Frame Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Plate Plate Fender Support Plate M1-1-76.0 (2 of 4) FSCM No. 72968 86157 36422 72968 90483 90483 36422 36422 36422 90483 36422 90483 36422 36422 36422 36422 72968 36422 36422 36422 90483 36422 36422 36422 36422 36422 36422 90483 36422 35422 36422 36422 36422 36422 90483 36422 36422 36422 36422 90483 86157 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Carrier - Continued R284 M1-1-76.0 (3 of 4) M1-1-76.0 TM 10-3950-263-14&P-3 Parts List R284 Carrier - Continued REF. PART NO. QTY. 46 47 48 49 50 51 22A3033 22A3155 18A3155 PC262 18A4523 1X1876 1 1 1 3 4 12 52 53 18A3823 MS15570 4 1 DESCRIPTION FSCM No. Rear Fender Fender Support Ladder Padlock And Keys Stick-On Reflector Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, r8 X 3/8" Red Clearance Light Incandescent Lamp M1-1-76.0 (4 of 4) 36422 36422 36422 36422 36422 90483 36422 96906 TM 10-3950-263-14&P-3 Parts List Front Wheel And Axle Assembly R583 M1-2-81.0 (1 of 3) M1-2-81.0 TM 10-3950-263-14&P-3 Parts List R583 Front Wheel And Axle Assembly - Continued REF. PART NO. QTY. DESCRIPTION Quantities Are For One Axle Only, 2 Axles Required Per Machine 22A2984 1 Axle Assembly 1 3A1910 2 Grease Seal 2 3A1894 1 Steering Knuckle (Left) 3 A1895 1 Steering Knuckle (Right) 3A1917 2 Castle Nut 3A1931 2 Cotter Pin 4 3A1922 2 Nut 3A1923 2 Lockwasher 5 3A1916 2 Thrust Bearing 6 3A1881 2 Draw Key 7 3A10147 1 Axle Center Assembly 8 3A7692 4 Bolt 9 3A7693 4 Dust Plug 10 3A1878 4 Bushing 3A10144 4 Felt Washer 11 3A1865 6 Grease Fitting 12 3A1912 2 Knuckle Pin 13 3A4603 1 Cross Rod Assembly 3A10146 1 Cross Rod 14 3A1891 1 Rod End Service Kit 15 3A1879 2 Key 16 3A1908 2 Ball Stud 17 3A6902 1 Steering Arm (Left) 3A1904 1 Steering Arm (Right) 18 3A1883 2 Castle Nut 3A1928 2 Cotter Pin 19 3A1888 2 Washer 20 3A1880 2 Castle Nut 3A1930 2 Cotter Pin 21 1A2691 2 Gasket 22 1A2689 2 End Cap 23 1X3718 4 Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" X 1-3/4" 1X30 4 Spring Lockwasher, Medium Series, Carbon Steel, Natural,1/2" 18A3994 2 Wheel Assembly 24 1X2383 2 Tapered Roller Bearing Cone Assembly Single Row, Inch Dimension, Type TS; Rings And Rollers - Bearing Quality Alloy Steel, Low Carbon Carburizing Grade Or High Carbon Chromium; Cage - Low Carbon Steel, 3" I.D. 25 3A5761 12 Rim Clamp 26 3A6932 12 Bolt 1X31 12 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 5/8" 3A5757 12 Nut 27 3A7487 2 Wheel 28 3A6929 2 Brake Drum 29 1X2367 2 Tapered Roller Bearing Cone Assembly, Single Row, Inch Dimension, Type TS, Rings And Rollers - Bearing Quality Alloy Steel, Low Carbon Carburizing Grade Or High Carbon Chromium, Cage - Low Carbon Steel, 2-1/8" I.D. M1-2-81.0 (2 of 3) FSCM No. 36422 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 90483 20859 36422 19382 * * 20859 * * * 19382 Parts List R583 Front Wheel And Axle Assembly - Continued REF. PART NO. QTY. DESCRIPTION Items 30-32 Are Used On The Left Side Only 30 18A4413 1X5245 2 4 31 32 1A2691 1A2690 2 2 Hub Cap Step Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 1-3/4" Gasket Spacer * See Vendor Annex List For FSCM No. M1-2-81.0 (3 of 3) TM 10-3950-263-14&P-3 M1-2-81.0 FSCM No. 36422 72968 36422 36422 Parts List R1083 Front Brakes M1-3-29.0 (1 of 2) TM 10-3950-263-14&P-3 M1-3-29.0 TM 10-3950-263-14&P-3 Parts List REF. 1 2 PART NO. 3A8402 3A8403 3A8401 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 3A4596 3A4597 3A1932 3A1918 3A1925 3A1855 3A4600 3A5484 3A1863 3A1924 3A1919 3A1927 3A10143 3A11955 3A6925 3A6926 3A1861 3A1920 3A1925 3A1856 3A1853 3A1933 3A1862 3A6386 3A6899 3A1869 3A1921 3A1926 3A1866 3A1852 3A1854 3A1929 3A1851 R1083 QTY. 2 2 1 2 2 1 1 1 1 1 1 3 3 3 1 1 1 4 4 4 4 1 1 1 1 8 8 8 1 2 2 2 2 1 AR 2 2 1 2 2 2 1 1 DESCRIPTION Brake Assembly (Left Side) Brake Assembly (Right Side) Air Chamber Nut ) Washer ) Items Not Available Clevis Pin )__ Separately, Supplied Cotter Pin ) With Air Chamber Yoke ) Jam Nut ) Air Chamber Bracket (Left Side) Air Chamber Bracket (Right Side) Bolt Nut Lockwasher "U" Washer Slack Adjuster (Left Side) Slack Adjuster (Right Side) Bolt Lockwasher Nut Washer Backing Plate (Left Side) Backing Plate (Right Side) Camshaft (Left Side) Camshaft (Right Side) Bolt Nut - Not Shown Lockwasher - Not Shown Cam Bracket Assembly Bushing Screw Wear Plate Brake Shoe Assembly Brake Lining Bushing Nut Lockwasher Brake Release Spring Bushing - Brake Shoe Anchor Pin Cotter Pin Anchor Pin Plate Brake Drum (See Keysheet M1-2-81.0) M1-3-29.0 (2 of 2) FSCM No. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Parts List R583 TM 10-3950-263-14&P-3 M1-4-20.0 Front Suspension REF. 1 2 3 4 5 6 7 8 PART NO. 18A4290 3A1271 3A1273 1X1095 18A22 3A7206 3A3109 3A1273 3A3111 3A9426 3A1269 AC4094 1X110 QTY. 1 4 2 2 2 4 2 2 4 2 2 8 8 * DESCRIPTION Bogie Beam Assembly Torque Rod Assembly Nut Cotter Pin, Extended Prong, Square Cut, 3/16" X 2-1/2" Equalizer Beam Adaptor Bolt Nut Washer Bushing Bushing Rod Nut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert UNF-3B, 7/8" See Vendor Annex List For FSCM Number M1-4-20.0 (1 of 1) FSCM No. 36422 * * 20859 36422 * * * * * * 36422 72968 Parts List R1083 TM 10-3950-263-14&P-3 M1-5-5.0 Steering Column Assembly REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 12A1350 36A791 12A3149 1A3182 3A1965 3A1832 3A1956 3A1940 3A1941 3A1966 3A1935 3A1937 3A1938 3A1939 3A1951 3A1952 3A1953 3A1954 3A1962 3A1963 3A1961 3A1955 QTY. 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 2 1 1 1 1 1 DESCRIPTION Horn Button Unit Steering Wheel Turn Signal Lever Steering Column Assembly Jacket Tube Assembly Turn Signal Housing And Bearing Bearing Housing - Pilot Light Screw, Housing Jacket Tube W/Ring Reinforcing Ring Clamp Bolt Washer Locknut Directional Signal Switch Assembly Screw Screw Contact Roller Assembly Socket Assembly Cover Bulb Nut, Wheel M1-5-5.0 (1 of 2) FSCM No. 36422 36422 36422 36422 * * * * * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 Parts List R1083 Steering column Assembly - Continued REF. PART NO. QTY. DESCRIPTION 19 20 21 22 23 24 3A1960 3A1964 3A356 3A1957 3A1958 3A1959 1 1 1 1 1 2 FSCM No. Spacer Shaft Bearing Dust Cap Spring Spring Seat * * * * * * * See Vendor Annex List For FSCFM No. M1-5-5.0 (2 of 2) TM 10-3950-263-14&P-3 M1-5-6.0 Parts List Steering Gear M1-5-6.0 (1 of 3) TM 10-3950-263-14&P-3 Parts List Steering Gear - Continued REF. PART NO. QTY. DESCRIPTION 1 1A3181 1 Steering Gear And Valve 2 3A1805 1 Cover And Seal 3 3A282 1 Seal 4 3A1807 1 Vent Plug 5 3A290 1 Gasket 6 3A359 1 Locknut 7 3A1826 1 Lockwasher 8 3A1827 1 Tongued Washer 9 3A276 3 Thrust Washer 10 3A292 2 Thrust Bearing 11 3A1822 2 Centering Washer 12 3A2905 4 Spring 13 3A1818 1 Actuator 14 3A2906 1 Actuator Housing 15 3A1824 1 Washer 16 3A1823 1 Screw 17 3A2907 1 Cam 18 3A290 1 Gasket 19 3A1789 1 Housing W/Bushing 20 3A293 2 Cam Bearing 21 3A1793 2 Retaining Ring 22 3A355 2 Bushing 23 3A277 1 Seal 24 3A2066 1 Cover 3A288 1 Gasket 25 3A2908 1 Lever Shaft Assembly 3A1798 1 Nut lX35 1 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1-1/8" 26 3A291 1 Bearing Assembly 3A1797 1 Nut 3A1796 1 Washer 27 3A1799 1 Adjusting Screw 3A1800 1 Retainer 28 3A1801 1 Locknut 29 3A1802 1 Cover 3A1803 1 Gasket 30 3A2911 1 Valve Assembly 3A351 1 Spring (Internal) 31 3A280 2 Seal 32 3A2912 1 Cover And Seal 3A2915 1 Seal 3A2914 1 Retainer 33 3A2913 1 Seal 34 3A2918 1 Plug 3A2919 1 Spring 3A1809 1 Ball 35 3A2920 1 Lockwasher 36 lX1081 1 Cotter Pin, Extended Prong, Square Cut, 1/16" X 1" 37 3A2922 1 Clevis 3A2921 1 Nut 38 3A2925 1 Cover 3A2927 1 Seal M1-5-6.0 (2 of 3) FSCM No. 36422 * * * * * * * * * * * * * * * * * * * * * * * * * * 20859 * * * * * * * * * * * * * * * * * * * 20859 * * * * TM 10-3950-263-14&P-3 M1-5-6.0 Parts List Steering Gear - Continued REF. PART NO. QTY. DESCRIPTION 39 40 3A2926 3A2923 3A2928 3A2924 1 1 1 1 FSCM No. Lever Seal Mounting Bracket Gasket * * * * * See Vendor Annex List For FSCFM No. M1-5-6.0 (3 of 3) Parts List Power Steering "U" Joint Assembly REF. 1 2 PART NO. 18A1365 1X167 1X28 3 4 5 6 7 8 9 10 11 1X208 3A3020 3A3019 3A3014 3A3013 Ref 3A3012 Ref. 1X812 12 13 14 15 16 17 3A3017 3A3021 3A3019 3A3014 3A3013 Ref. R284 QTY. DESCRIPTION 1 Double "U" Joint Assembly 2 Nut Finished, Hexagon, American Standard Fine Thread, Carbon Steel, 3/8" 2 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" 2 Capscrew, Hex Head, UNF, 3/8" X 1-3/4" 1 Spline Plug Yoke Assembly 1 Clamp 1 Center Parts Kits 4 Snap Ring 4 Bushing (Not Sold Separate) 4 Cork Washer 1 Center Cross (Not Sold Separate) 1 Grease Fitting, 600, Steel, Bright Zinc Plated, Ball Check At Top, 1/8" 1 Yoke Spline Plug 1 Slip Yoke Assembly 1 Clamp 1 Center Parts Kit 4 Snap Ring 4 Bushing (Not Sold Separate) M1-5-8.0 (1 Of 2) TM 10-3950-263-14&P-3 M1-5-8.0 FSCM No. 36422 90483 20859 90483 * * * * * 78385 * * * * * TM 10-3950-263-14&P-3 Parts List R284 Power Steering "U" Joint Assembly - Continued REF. PART NO. QTY. DESCRIPTION 18 19 20 3A3012 Ref. 1X816 4 1 1 21 22 23 24 3A11567 3A3018 3A3016 3A3015 1 1 1 1 FSCM No. Cork Washer Center Cross (Not Sold Separate) Grease Fitting, 600, Steel, Bright Zinc Plated, Ball Check At Top, 1/8" Grease Fitting Slip Yoke Felt Washer Dust Cap *See Vendor Annex List For FSCFM No. M1-5-8.0 (2 Of 2) * 78385 * * * * TM 10-3950-263-14&P-3 Parts List M1-6-18.0 Steering Geometry N206-D REF. 1 2 3 4 PART NO. 12A1350 36A791 12A1349 1X3375 1X3809 5 1X1430 6 7 8 9 10 11 12 1X2 18A3332 1A3182 18A1688 22A2017 22A2016 18A1365 1X3819 1X5079 13 AC3752 1X1096 1X1800 QTY. DESCRIPTION 1 Horn Button Unit 1 Steering Wheel 1 Turn Signal Lever Unit 4 Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 4" 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32,Nylon Insert, UNC-3B, 3/8" 6 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, 1/4" X 3/8" 6 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 1 Clamp 1 Steering Column, See Keysheet M1-5-5.0 1 Clamp 1 Bracket 1 Cover 1 Joint Assembly, Double Universal, See M1-5-8.0 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 5/8" 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" 3 Ball Socket Assembly 3 Cotter Pin, Extended Prong, Square Cut, 3/16" X 3" 3 Grease Fitting, 1/8", 900,Steel,Bright Zinc Plated, Ball M1-6-18.0 (1 Of 2 ) FSCM No. 36422 36422 36422 90483 72968 90483 86157 36422 36422 36422 36422 36422 36422 90483 72968 36422 20859 78385 TM 10-3950-263-14&P-3 Parts List Steering Geometry - Continued REF. PART NO. 14 15 1A3539 1X3883 16 17 1A3181 1X5167 18 19 22A2014 AC4199 1X1096 1X1800 20 21 22 AC3753 18A4455 AC4121 1X1099 1X1800 23 24 22A2013 36A1225 1X1096 1X1800 25 26 36A1357 8A151 18A3107 18A3106 1X4476 27 28 29 30 1X812 22A2026 AC3753 18A2956 1X4987 31 22A2012 QTY. DESCRIPTION Check At Top 1 Pitman Arm Assembly 1 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/8" X 2" 1 Steering Gear, See M1-5-6.0 2 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 5/8" X 1-3/4" 1 Drag Link 2 Ball Socket Assembly 2 Cotter Pin, Extended Prong, Square Cut, 3/16" X 3" 2 Grease Fitting, 1/8", 90°, Steel, Bright Zinc Plated, Ball Check At Top 1 Bracket And Ball Frame Assembly 2 Steering Cylinder, See M1-7-14.0 2 Ball Socket Assembly 2 Cotter Pin, Extended Prong, Square Cut, 1/4" X 2-1/4" 2 Grease Fitting, 1/8", 90°, Steel, Bright Zinc Plated, Ball Check At Top 1 Drag Link 3 Ball Socket 3 Cotter Pin, Extended Prong, Square Cut, 3/16" X 3" 3 Grease Fitting, 1/8", 900, Steel, Bright Zinc Plated, Ball Check At Top 3 Clamp Assembly 2 Capscrew 1 Pin 1 Spacer 2 Needle Roller Bearing, Drawn Cup, AFBMA Type NIB, RollersHigh Carbon Chromium Steel, Cup-Low Carbon Steel, Loading End Not To Be Carbonized 1 Grease Fitting, 1/8", -27 Dryseal, PTF-SAE Short 1 Idler Arm Assembly 1 Bracket And Ball Frame Assembly 6 Capscrew 6 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34, UNC-3B, 1/2" 1 Drag Link M1-6-18.0 (2 OF 2) FSCM No. 36422 72968 36422 72968 36422 36422 20859 78385 36422 36422 36422 20859 78385 36422 36422 20859 78385 36422 36422 36422 36422 80657 78385 36422 36422 36422 72968 TM 10-3950-263-14&P-3 Parts List 12’ Steering Cylinder R1083 M1-7-14.0 LA776-A REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 18A4455 3A1725 3A8311 1X109 3A5713** 3A8314 3A5717 3A281** 3A352** 3A280** 3A5712** 3A283** 3A984 3A5714 3A1726 3A1724 3A358 3A5711 3A5718** 3A5715 QTY. DESCRIPTION 1 Cylinder Assembly 1 Clamp Assembly 1 Head 1 Locknut, Hexagon, Low Carbon Steel, Rockwell C32 Nylon Insert, UNF-3B, 3/4" 1 "O"-Ring 1 Piston Rod 1 Gland Assembly 1 "O"-Ring 1 Back-Up Ring 2 "O"-Ring 1 Back-Up Ring 1 Seal 1 Retaining Ring 1 Retainer 4 Capscrew 1 End Cover 2 Washer 1 Washer 1 Piston Ring 1 Piston M1-7-14.0 (1 Of 2) FSCM No. 36422 * * 72968 * * * * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 Parts List 12’ Steering Cylinder - Continued REF. PART NO. 3A8312 R1083 QTY. DESCRIPTION 1 Piston Assembly Kit, Consisting Of Items #4,5,6,19 & 20 * See Vendor Annex List For FSCM No. ** All Items Included In Seal Kit 3X141. M1-7-14.0 (2 Of 2) FSCM No. * 36422 TM 10-3950-263-14&P-3 Parts List Power Steering Hoses M1-9-35.0 N66-B REF. 1 2 3 4 5 6 7 8 9 10 PART NO. 19A1113 1J484 1X4705 18A2838 22A873 18A4471 18A4469 36A488 18A4470 19A397 JR766 QTY. DESCRIPTION 1 Hose Assembly 8 Tube Clamp 4 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 1/2" 1 Clamp 1 Hose Assembly 1 Hose Assembly 2 Hose Assembly 2 Tee 1 Hose Assembly 2 Hose Assembly 4 Adapter 36422 M1-9-35.0 (1 Of 1 ) FSCM No. 36422 36422 72968 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Power Steering Pump Assembly M1-10-18.0 M1-10-18.0 (1 OF 2) TM 10-3950-263-14&P-3 Parts List Power Steering Pump Assembly - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PART NO. 18A3433 3A1531 3A1533 3A4850 3A4851 3A1536 3A1537 3A1538 3A1540 3A952 3A1847 3A1542 3A1543 3A1842 3A10049 3A968* 3A1552 3A1553 3A954** 3A957* 3A958* 3A964 3A1557 3A965 3A963 3A962 3A961* 3A960 3A1555 3A955** 3A956** 3A1554 3A966* 3A4853 3A1841 3A1549 3A4854 3A1546 3A1547 QTY. DESCRIPTION 1 Pump Assembly 1 Wing Nut 1 Lockwasher 1 Washer 1 Cover 1 Cotter Pin 1 Washer 1 Spring 1 Retainer 1 Filter Element 1 Stud 1 Screw 1 Baffle 1 Nut 1 Reservoir Kit W/Filter 1 Gasket 1 Spring 1 Pressure Plate 1 Ring 1 "O" Ring 1 "O" Ring 1 Shaft 1 Key 1 Retaining Ring 1 Bearing 1 Retaining Ring 1 Shaft Seal 1 Bearing 1 Body 1 Vane Kit (12 Vanes) 1 Rotor 2 Pin 1 "O" Ring 1 Plug 1 Control Valve 1 Spring 1 Cover 1 Pin 1 Screw FSCM No. 36422 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** * 1 Complete Seal Kit 3A951 *** ** 1 Complete Cartridge Kit 3A953 *** *** See Vendor Annex List For FSCM No. M1-10-18.0 (2 Of 2) TM 10-3950-263-14&P-3 Parts List Fuel Lines REF. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 18A4335 JR895 8H1079 1H1834 1X3757 1X3809 1X4007 AC1032 1X1911 18A4336 860030004 810005005 12 13 14 AC3676 AC4685 860030002 M1-12-46.0 QTY. DESCRIPTION 4 Hose Assembly 3 Elbow 1 Pressure Switch 1 Bushing Fuel, Filter, See M1-63-62.15 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2" 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Fuel Strainer, See M1-63-62.15 2 Pipe Plug, Hex Head, Forged Carbon Steel, NPT Threads, 3/8" 1 Connector 3 Street Elbow, 90°, Steel, 3/8" 1 Hose Assembly 3 Aluminum Alloy Tubing, 3003-0, Drawn And Coiled, 1/2" O.D. X .035" (20 Ga.) Wall 3 Non-Metallic Flexible Conduit, Automotive, SAE, Spec. J562 For Fire Resistant Loom, 3/8" I.D. 1 Elbow 1 Elbow 3 Aluminum Alloy Tubing, 3003-0, Drawn And Coiled, 3/8" O.D. X .035" (20 Ga.)Wall M1-12-46.0 (1 Of 2) FSCM No. 36422 36422 36422 36422 90483 72968 09505 36422 09505 36422 11292 79725 36422 36422 11292 TM 10-3950-263-14&P-3 Parts List Fuel Lines - Continued REF. 15 16 17 18 PART NO. 810005004 JB1126 1X981 QTY. DESCRIPTION 3 Non-Metallic Flexible Conduit, Automotive, SAE Spec. J562 For Fire Resistant Loom, 1/2" I.D. 1 Connector 1 Threaded Pipe Fuel Pump, See M1-63-64.14 Fuel Tanks, See M1-12-51.0 M1-12-46.0 (2 Of 2) FSCM No. 79725 36422 36422 TM 10-3950-263-14&P-3 Parts List Fuel Tank Assembly M1-12-51.0 NA374-A REF. 1 2 3 4 5 PART NO. 28A1872 18A3593 17H112 22A3014 22A186 1X3808 6 7 22A423 1X3302 1X3808 8 28A1826 28A1827 22A2719 22A191 9 10 QTY. DESCRIPTION 1 Wire Assembly 2 Fuel Tank Cap 1 Fuel Sending Unit 1 Fuel Tank (Right Side) 4 J-Bolt 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" 2 Hose Assembly 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1-1/2" 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" 2 Fuel Tank Vent 2 Breather Vent 1 Fuel Tank (Left Side) 2 Channel M1-12-51.0 (1 Of 1 ) FSCM No. 36422 36422 36422 36422 36422 72968 36422 90483 72968 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Heater And Defroster REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 1R574 3A12031 3A1993 3A12018 3A12025 3A1997 3A12021 3A12019 3A12020 AC4255 3A2001 3A1994 3A12524 3A1995 AC4259 18A2838 R1083 QTY. DESCRIPTION 1 Heater Assembly, 12 Volt 1 Motor 1 Blade 1 Top Housing 2 Washer 2 Nut 1 Bracket 1 Housing 1 Core 1 Defroster Assembly 1 Guard 1 Blade 1 Base Plate 1 Motor 2 Pipe 2 Hose Clamp Note: For Continuation of Hoses, See Ml-16-5.0 *See Vendor Annex For FSCM No. M1-16-0.0 (1 Of 1) M1-16-0.0 FSCM No. 36422 * * * * * * * * 36422 * * * * 36422 36422 TM 10-3950-263-14&P-3 Parts List Heater Hose, Lines And Fittings REF. 1 2 3 4 5 6 7 8 9 10 PART NO. AC4259 18A2838 822001003 18A1782 1X896 AC4257 18A2838 AC4258 18A2838 M1-16-5.0 QTY. DESCRIPTION 1 Pipe 2 Hose Clamp 1 Heater Hose Type P (EPDM) Black Color, Synthetic Yarns, 1 Ply, .625 I.D. 2 Grommet 1 Pipe Reducer Bushing, Hex Head, Steel, 3/4" X 1/8" 1 Drain Cock 1 Hose Clamp 1 Nipple 1 Hose Clamp Heater Assembly, See M1-16-0.0 M1-16-5.0 (1 Of 1 ) FSCM No. 36422 36422 24161 36422 09505 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Clutch Assembly M1-17-20.0 L666-A REF. 1 2 3 4 5 PART NO. 18A4288 3A7486 3A3071 3A3055 3A3072 QTY. DESCRIPTION 1 Clutch 1 Cover Assembly 1 Disc-Pressure Plate Side* 1 Intermediary Disc 1 Disc Flywheel Side* FSCM No. 36422 ** ** ** ** * Use 3A9214 Facing Kit ** ** See Vendor Annex List for FSCM NO. M1-17-20.0 (1 Of 1) TM 10-3950-263-14&P-3 Parts List Air Valve & Regulator- Filter Assembly M1-18-33.0 M1-18-33.0 (1 of 2) TM 10-3950-263-14&P-3 Parts List Air Valve & Regulator- Filter Assembly - Continued REF. QTY. DESCRIPTION 1 Air Valve Assembly 1 Valve Housing (Ref. Only) 1 "O" Ring 1 Plug 1 Cap 1 "O" Ring 1 Piston 1 "O" Ring 1 Spring 1 "O" Ring 1 Seal 1 Cap 2 Capscrew, Hex Head, UNC-Class-2A, Grade 5, 1/4" X 1-1/4" FSCM No. * * * * * * * * * * * * 90483 * * * * * 1X823 1 1 1 1 1 1 1 19 20 3Al1010 1X823 1 1 21 22 23 24 25 26 27 28 3A715 3A738 3A4573 3A835 3A735 3A844 1X953 3 1 2 3 1 1 1 1 29 30 31 32 1X873 3A8635 3A919 810002001 1 1 1 AR 33 810001001 AR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 3A9576 3A691 3A695 3A693 3A690 3A694 3A9577 3A696 3A691 3A697 3A5419 1X514 3A10249 3A10901 3A10244 3A10900 3A10245 Air Filter Assembly Body Element "O" Ring "O" Ring Cap (Ref.) Only Pipe Plug, Hex Socket, Heat Treated Alloy Steel, 1/8" Capscrew Pipe Plug, Hex Socket, Heat Treated Alloy Steel, 1/8" Air System Connector Assy. Elbow Assy.* Hose, 32" Elbow Cover (See M1-18-36.O) Shift Valve Breather Pipe Nipple, Standard Weight, Wrought Stee, NPT Threads, 1/8" Tee, Straight, Malleable Iron, NPT Theads, 1/8" Boot Range Valve Nylon Pressure Tubing, Medium Pressure Tubing, Extremely High Flex, And Vibration Life, Natural Color, 1/8" O.D. X 5/64" I.D. Tubing, Nylon 11, Flexible, Low Pressure, Extremely Low Moisture Absorption, Black, 1/8" O.D. X 5/64" I.D. M1-18-33.0 (2 of 2) 09505 * 09505 * * * * * 09505 09505 * * 06229 06229 TM 10-3950-263-14&P-3 Parts List Main Transmission M1-18-36.0 M1-18-36.0 (1 Of 10) TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued REF. PART NO. QTY. DESCRIPTION 18A4730 1 Transmission Assembly Main Housing Assy. 1 3A5496 1 Transmission Case 2 3A761 3 Magnetic Disc 3 3A8635 2 Dowel Pin 4 3A784 2 Stud 1X31 2 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 5/8" 1X171 2 Finished Hexagon Nut, American Standard, Fine Thread, Carbon Steel, 5/8" 5 1X832 1 Pipe Plug, Square Head, Steel, 1-1/4" 6 BC596 1 Magnetic Plug 7 3A5241 1 Cover 3A5242 1 Gasket 3A10899 8 Capscrew 8 1X829 1 Pipe Plug, Square Head, Steel, 1/2" 9 3A725 1 Gasket 10 3A5506 2 Bushing 11 3A712 1 Hand Hole Cover 3A10898 2 Capscrew 12 3A726 1 Gasket 13 3A4549 6 Stud 1X1647 6 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNF-3B, 5/8" 1X21 6 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/8" 14 3A709 1 Bearing Cover 15 1X530 4 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/4" 1X3599 2 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/4" 1X28 2 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" 16 1X3302 4 Capscrew, Hex Head, UNC Class-2A-Grade 5, 1/2" X 1-1/2" 17 3A10896 1 Bell Housing Housing Cover Assy. 18 1X530 16 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/4" 19 3A7485 1 Plug 3A6863 1 Gasket 20 3A757 1 Breather 21 3A682 2 Lifting Eye 1X531 2 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/2" 22 3A786 2 Spring AC421 2 Steel Ball 23 3A2879 1 Gasket 3A2878 1 Plug 3A2877 1 Pin 24 3A786 1 Spring AC421 1 Steel Ball 25 3A790 1 Air Valve Shaft M1-18-36.0 (2 Of 10) FSCM No. 36422 * * * * 20859 90483 09505 36422 * * * 90505 * * * * * 72968 86157 * 90483 90483 20859 90483 * 90483 * * * * 90483 * 36422 * * * * 36422 * TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued M1-18-36.0 M1-18-36.0 (3 Of 10) TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued REF. PART NO. QTY. DESCRIPTION 26 3A9571 1 Shift Bar Cover 3A928 1 Gasket Yoke And Bars 27 3A781 1 Plug 28 3A717 1 Spring 29 3A782 1 Plunger 30 3A5512 1 Shift Yoke (2nd Speed) 31 JC1785 2 Steel Ball 32 3A791 1 Shift Block (2nd Speed) 33 3A742 5 Lockscrew 34 3A934 1 Pin 35 3A5511 1 Yoke Bar (2nd Speed) 36 3A5510 1 Shift Yoke (Reverse) 37 3A5513 1 Shift Yoke (Direct) 38 3A5514 1 Yoke Bar (Direct) 39 3A792 1 Shift Block (Direct) 40 3A5509 1 Yoke Bar (Reverse) Drive Gear Assembly 41 3A764 1 Nut * 42 3A769 1 Bearing 43 3A5542 1 Spacer 44 3A5535 1 Snap Ring 45 3A10882 1 Gear (Main Drive) 46 3A10881 1 Input Shaft 3A10880 1 Sleeve 47 3A4550 1 Bushing Mainshaft Assembly 48 3A5245 1 Key 49 3A4553 1 Roll Pin 50 3A5539 1 Mainshaft 51 3A5535 5 Snap Ring 52 3A5538 1 Gear (Reverse) 53 3A5532 5 Spacer 54 3A5526 5 Washer 55 3A5525 3 Sliding Clutch 56 3A10884 1 Gear (2nd) 57 3A10883 1 Gear (1st) 58 3A10885 1 Gear (3rd) 59 3A10886 1 Gear (O/D) Reverse Idler Gear Assembly 60 3A885 2 Nut 61 3A723 2 Idler Plate 62 3A722 2 Washer 63 3A925 2 Bearing 64 3A5548 2 Idler Gear 65 3A10877 2 Washer 66 3A4545 2 Idler Shaft 67 3A922 2 Plug Synchronizer Assembly 68 3A884 3 Spring 69 3A6118 1 Synchronizer (Low) 70 3A5558 1 Sliding Clutch 71 3A887 1 Synchronizer (High) M1-18-36.0 (4 Of 10) FSCM No. * * * * * * 36422 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 M1-18-36.0 Parts List Main Transmission - Continued M1-18-36.0 (5 Of 10) TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued REF. PART NO. QTY. DESCRIPTION Reduction Gear & Output Shaft Assembly 72 3A5562 1 Mainshaft 73 3A8637 1 Snap Ring 74 3A889 1 Pin 3A887 1 Key 75 3A5575 1 Washer 76 3A10867 1 Gear (Low) 77 3A5579 1 Coupler (Mainshaft) 78 3A810 1 Snap Ring 79 CM31 1 Bearing 80 3A4555 1 Bushing 81 3A10868 1 Sliding Clutch 82 3A871 1 Quill & Pin 83 3A10869 1 Mainshaft 84 3A6131 1 Washer 85 3A4566 1 Spacer 86 3A10870 1 Gear (Reduction) 87 3A855 1 Snap Ring 88 3A4567 1 Washer 89 3A891 1 Nut Auxiliary Countershaft Assembly 90 3A638 2 Bearing 91 3A10866 2 Countershaft Assembly 92 3A916 2 Bearing 93 3A4571 2 Snap Ring Countershaft Assy. 94 3A10889 2 Countershaft Assy. 95 3A8707 2 Key 96 3A740 2 Bearing 97 3A727 2 Snap Ring 98 3A10890 2 Gear (2nd) 99 3A10891 2 Gear (3rd) 100 3A10892 2 Gear (O/D) 101 3A8706 2 Capscrew 102 3A10888 2 Retainer 3A6077 2 Rollpin 103 3A10887 2 Bearing 104 3A8703 2 Snap Ring 105 3A10893 2 Gear (Drive) 106 3A10894 1 Gear (PTO) Right Side 3A10780 1 Spacer - Left Side Aux. Drive Gear 107 3A5549 2 Snap Ring 108 3A5550 1 Snap Ring 109 3A5546 1 Bearing 110 3A5547 1 Retainer 111 3A10878 2 "O" Ring 112 3A10879 1 Gear (Drive) 113 3A2871 6 Capscrew Rear Housing Assy. 114 1X531 9 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/2" M1-18-36.0 (6 Of 10) FSCM No. * * * * * * * * 36422 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 90483 TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued M1-18-36.0 M1-18-36.0 (7 Of 10) TM 10-3950-263-14&P-3 Parts List Main Transmission - Continued REF. PART NO. QTY. DESCRIPTION 1X530 8 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/4" 3A10871 2 Capscrew 115 3A899 1 Bearing 116 3A852 1 Gasket 117 3A851 1 Bearing Cover 118 3A849 1 Bushing 119 3A850 1 Oil Seal 120 3A10873 5 Capscrew 121 3A7465 1 Spacer (Speedo Replacement) 122 1X3729 1 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 2-3/4" 123 3A5573 1 Gasket 124 3A10874 1 Collar 125 3A1566 1 Plug 126 3A6863 1 Gasket 127 3A7485 1 Magnetic Plug 128 3A10872 8 Capscrew 129 3A853 1 Bearing Cover 3A854 1 Gasket 130 3A915 1 Rear Housing 131 3A731 1 Gasket Range Cylinder Assembly 132 3A5257 1 Shift Yoke 133 1X3734 2 Capscrew, Hex Head, UNC Class-2A-Grade 5, 1/2" X 2" 134 3A857 1 Gasket 135 3A5253 1 Aux. Cylinder 136 1X530 8 Capscrew, Hex Head, UNC Class-2A-Grade 5, 1/2" X 1-1/4" 137 3A895 1 Piston 138 3A896 1 "O" Ring 139 3A898 1 Gasket 140 3A10270 4 Capscrew 141 1X1647 1 Locknut, Hexagon, Low Carbon Steel, Rockwell C2, Nylon Insert, UNF-3B, 5/8" 142 3A10875 1 Cylinder Cover 143 3A5258 1 Yoke Bar 144 3A858 1 "O" Ring Reduction Cyl. Assy. 145 3A682 1 Gasket 146 3A742 1 Lockscrew 147 3A4568 1 Shift Yoke 148 3A5554 Aux. Cylinder 149 3A911 1 "O" Ring 150 3A7566 1 Yoke Bar & Piston 151 3A900 1 "O" Ring 152 3A5260 1 Gasket 153 3A5259 1 Cylinder Cover 154 3A10876 4 Capscrew 1X27 4 Spring Lockwasher, Medium Series, Carbon Steel Natural, 5/16" M1-18-36.0 (8 Of 10) FSCM No. 90483 * * * * * * * * 90483 * * * * * * * * * * * 90483 * * 90483 * * * * 72968 * * * * * * * * * * * * * * 20859 TM 10-3950-263-14&P-3 Parts List M 1-18-36.0 Main Transmission - Continued M1-18-36.0 (9 Of 10) TM 10-3950-263-14&P-3 Parts List Live Mast Lines - Continued REF. PART NO. QTY. DESCRIPTION Range Valve Assembly 155 1X3540 4 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, #8 X 5/8" 156 3A8634 1 Body * 157 3A700 2 Seal * 158 3A699 2 Spring * 3A705 2 Ball * 159 3A686 1 Knob * 3A704 1 Rollpin * 160 3A7469 1 Body * 161 3A7470 1 Spring * 162 3A7468 2 Seal * 163 3A7471 1 Seal * 164 3A7472 1 Slide * Air System 165 3A733 1 Sleeve 166 3A717 1 Pin * 167 3A732 1 Spring * 168 3A836 2 Street Ell 169 3A4574 1 Hose (Short) 170 3A5240 1 Hose (Long) 171 1X530 1 Capscrew, Hex Head, UNC Class-2A-Grade 5, 1/2" X 1-1/4" 172 3A10894 1 Clamp * 173 3A835 1 Elbow * 174 3A9576 1 Slave Valve 175 1X515 4 Capscrew, Hex Head, UNC Class-2A-Grade 5, 1/4" X 1-3/4" 1X26 4 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/4" 176 3A719 1 Gasket Release Yoke Assy. 177 3A1782 1 Setscrew 178 1X153 1 Finished Hexagon Nut, Coarse Thread, Carbon Steel, 1/2" 179 3A917 1 Adjusting Arm 180 3A707 2 Spring * 181 3A780 1 Release Yoke 182 3A711 1 Pedal Shaft 183 3A779 1 Hose Assy., 8" 184 3A775 1 Coupling 185 3A774 1 Nipple * 186 3A776 2 Spring * 187 3A619 1 Bearing * 188 3A6159 1 Bearing Carrier 189 1X2917 2 Capscrew, Hex Head, UNF, 3/8" X 1" 190 3A6054 1 Pedal Shaft 191 1X208 1 Capscrew, Hex Head, UNF, 3/8" X 1-3/4" 1X28 1 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" 1X167 1 Finished Hexagon Nut, American Standard, Fine Thread, Carbon Steel, 3/8" * See Vendor Annex List For FSCFM No. M1-18-36.0 (10 Of 10) FSCM No. 90483 * * * 90483 * 90483 20859 * 90483 * * * * * * 90483 * 90483 90483 90483 TM 10-3950-263-14&P-3 Parts List R284 M 1-19-36.0 Transmission Control M1-19-36.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List R284 Transmission Control Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 18A4391 1 Master Control Assembly 36422 1 3A5827 1 Knob * 2 1X529 4 Capscrew, Hex head, Unc Class 2A - Grade 5, 3/8" 90483 X 1" 3 18A4392 1 Shift Lever 36422 4 3A664 1 Seat * 5 3A665 1 Washer * 6 3A3987 2 Oil Seal * 7 3A3982 2 Bushing * 8 3A3989 1 Control Housing * 9 3A3990 1 End Cap * 3A937 1 Gasket * 10 1X519 3 Capscrew, Hex Head UNC, Class 2A - Grade 5, 5/16" 90483 X 7/8" 1X27 3 Spring Lockwasher, Medium Series, Carbon Steel, 20859 Natural, 5/16" 11 3A9579 1 Grease Fitting * 12 3A8021 1 Housing Cover * 13 3A8022 1 Pin * 14 3A942 1 Bolt* 15 3A940 1 Shift Yoke * 16 36A1872 1 "U" Joint 36422 17 37A1609 2 Lockscrew 36422 Slave Assembly (Available By Piece Part Only) 18 37A1609 2 Lockscrew 36422 19 19A991 1 Boot 36422 20 3A747 2 Adjustable Clamp * 21 3A749 1 Shift Finger * 22 3A742 1 Lockscrew * 23 3A753 1 Boot * 24 3A3984 1 Outer Shift Shaft * 25 36A1872 1 "U" Joint 36422 26 1 Control Rod, See Clutch & Transmission Controls M1-19-57.0 27 3A3988 1 Shaft Assembly * 28 3A3986 1 Snap Ring * 29 3A1784 1 Capscrew 30 3A3985 1 Shaft Finger * 31 3A757 1 Breather * 32 3A8053 1 Bushing (End) * 3A8054 1 Bushing (Middle) * 33 3A743 1 Plug * 34 1X194 4 Jam Nut, Hexagon, UNF-2B. Steel, Zinc Plated, 3/8" 90483 3A932 4 Nut 3A744 4 Stud * 35 3A585 1 Gasket * 36 3A3987 2 Oil Seal * 37 3A3982 2 Bushing * 38 3A746 1 Cover* 3A748 1 Gasket * 39 1X518 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/16" X 3/4" 90483 40 3A3983 1 Control Housing * * * See Vendor Annex List For FSCFM NO. M1-19-36.0 (2 Of 2) TM 10-3950-263-14&P-3 Parts List M 1-19-57.0 Clutch & Transmission Controls LA712-D M1-19-57.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List Clutch and Transmission Controls- Continued REF. PART NO. QTY. DESCRIPTION 1 22A2138 1 Pedal 36422 HC2461 1 Pad36422 2 1X3729 1 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2-1/2" 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 1X1960 Key, Special Square Parallel, C-1018, 3/16" X 1" 3 28A1713 1 Lever 36422 12A3389 1 Knob 36422 4 18A2149 1 Spacer 36422 1X3256 2 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2-1/2" 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 5 22A2134 1 Control Rod36422 6 22A2150 1 Lever 36422 7 JE409 2 Pin 36422 lX1086 2 Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" 8 JE407 2 Yoke End 36422 lX196 2 Jam Nut, Hexagon, UNF-2B, Steel, Zinc Plated, 1/2" 9 18A4591 1 Pipe 36422 10 18A4590 1 Bearing 36422 1X283 2 Bolt, Round Head, Square Neck, Steel, Zinc Plated, UNC-2A, 5/16" X 1" 1X5080 2 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 5/16" 11 18A4592 1 Pipe 36422 12 22A643 1 Cable36422 13 18A3734 1 Rubber Ring 14 JC2279 1 Clamp 36422 18A2216 1 Bar 36422 AC5493 1 Capscrew36422 1X5079 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell, C32, Nylon Insert, UNC-3B, 1/2" 15 AC3901 2 Yoke End 36422 JE409 2 Pin 36422 1X1084 2 Cotter Pin, Extended Prong, Square Cut, 3/32" X 1-1/4" 1X194 2 Jam Nut,, Hexagon, UNF-2B, Steel, Zinc Plated, 3/8" 16 18A2150 2 Angle 36422 1X2574 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1" 1X3809 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 17 28A683 2 Flanged Bearing 1X3357 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1-1/2" 1X3809 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 18 22A837 1 Plate 36422 1X3918 3 Capscrew, Lk. Hex, UNC Class 2A- Grade 5, 3/8" X 1-1/2" 19 18A4439 1 Lever 36422 20 19A781 1 Spring Anchor HC121 1 Spring 36422 21 SC299 1 Eye Bolt 36422 1X180 2 Jam Nut, Finished, Hexagon, Coarse Thread, Steel, Zinc Plated, 1/4" 22 B987 1 Set Collar 36422 M1-19-57.0 (2 Of 3) FSCM No. 90483 72968 09505 90483 72968 20859 90483 90483 72968 36422 72968 20859 90483 90483 72968 36422 90483 72968 90483 36422 90483 TM 10-3950-263-14&P-3 Parts List Clutch and Transmission Controls- Continued REF. PART NO. QTY. DESCRIPTION 23 20J41 1X3717 22A2135 1 1 1 FSCM No. Tube Bracket Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 3/4" Control Rod36422 M1-19-57.0 (3 Of 3) 36422 90483 TM 10-3950-263-14&P-3 Parts List Drive Train Assembly M 1-22-45.0 NA265-D REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 18A2336 22A2954 3A577 3A7317 3A10136 28A1897 19A2159 3A7317 3A7648 3A577 3A4971 3A1360 1A3098 3A576 3A552 3A4309 3A1470 QTY. 1 1 1 2 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 DESCRIPTION FSCM No. Main Transmission (See Keysheet M1-18-36.0 ) Companion Flange Drive Shaft (Front *See Vendor Annex "U" Joint Kit List For FSCFM No. Slip Yoke Drive Tube Companion Flange Drive Shaft (Middle) Slip Yoke Drive Tube "U" Joint Kit Companion Flange Companion Flange Drive Shaft (Rear) "U" Joint Kit Slip Yoke Drive Tube Companion Flange Rear Rear Axle, See M1-24-80.0 Front Rear Axle, See M1-24-79.0 Creeper Transmission, See M1-61-7.0 M1-22-45.0 (1 Of 1) 36422 36422 * * 36422 36422 * * * * * 36422 * * * TM 10-3950-263-14&P-3 Parts List M1-24-41.1 Plant Spider Assembly REF. 1 2 3 4 5 6 7 8 PART NO. 3A5322 3A4485 3A4486 3A4487 3A4488 3A5355 3A1170 3A4489 QTY. 1 6 150 3 3 1 3 3 DESCRIPTION FSCM No. Planet Spider Thrust Washer Pinion Needle Roller Planet Pinion Spacer * Spider * Lock Ball Pinion Shaft * See Vendor Annex List For FSCM No. M1-24-41.1 (1 of 1) * * * * * * TM 10-3950-263-14&P-3 Parts List M1-24-79.0 Front Rear Axle Assembly M1-24-79.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List Front Rear Axle Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 22A3147 1 Front Rear Axle Assembly 2 3A4495 2 Internal Gear And Hub 3 3A4496 2 Hub * 4 3A4497 2 Gear * 5 3A5740 16 Screw * 6 3A4508 4 Spindle Nut * 7 3A4509 2 Spindle Nut Lock 8 2 Planet Spider Assembly, See M1-24-41.0 9 3A1431 40 Washer * 10 3A5324 40 Capscrew* 11 3A4968 2 Sun Gear * 3A7556 2 Thrust Washer 12 3A4511 2 Snap Ring * 13 3A4512 2 Cap Washer 14 3A5326 2 Thrust Cap W/Washer 3A5327 2 Thrust Cap "O" Ring 15 3A1284 12 Lockwasher* 16 3A9355 12 Capscrew* 17 3A4491 2 Planet Cover Plug 3A5391 2 Oil Level Plug 18 3A5342 2 Hub And Drum Assembly 19 3A1102 24 Bolt* 20 3A1076 24 Lockwasher 21 3A4500 2 Brake Drum 22 3A4501 2 Oil Catcher 23 3A5329 1 Hub And Cup Assembly 24 3A4503 2 Inner Cup 25 3A4504 2 Outer Cup 26 3Al100 24 Wheel Stud 27 3A5328 2 Hub Oil Seal 28 3A4506 2 Inner Bearing Core 29 3A5391 2 Filler Plug* 30 3A1325 24 Rim Lug * 31 3A1115 24 Wheel Nut * 32 3A4510 2 Axle Shaft * 33 3A4507 2 Outer Bearing Core 34 3A1291 1 Breather * 35 3A5330 1 Output Shaft 36 3A5331 1 Bearing And Spacer Kit 37 3A5332 1 Gasket * 38 3A5333 1 Retainer * 39 3A5334 6 Retainer Stud 3A8933 6 Stud Nut * 40 3A1363 1 Nut * 41 3A1447 1 Cotter Pin* 42 3A1362 1 Washer * 43 3A1360 1 Companion Flange 44 3A1419 1 Dust Shield * 45 3A5335 1 Seal * 46 3A5391 1 Filler Plug* 47 3A10958 1 Housing 48 3A10959 2 Spindle End* 3A5338 2 Spindle Sleeve Ml-24-/9.0 (2 Of 3) FSCM No. 36422 * * * * * * * * * * * * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 M 1-24-79.0 Parts List Front Rear Axle Assembly- Continued REF. PART NO. QTY. DESCRIPTION 49 1X3757 1X3729 4 4 50 1X28 8 3A5339 3A1454 3A1455 2 4 8 3A2895 3A5733 3A4518 3A109G61 3A1467 3A1468 3A1091 3A1679 3A1173 3A4516 3A1711 3A1428 3A4515 3A1332 3A1087 3A1313 1X812 3A1094 3A8714 3A8715 3A1389 1X32 1X3802 2 4 4 32 1 1 2 2 2 2 2 2 2 32 20 2 2 2 1 1 4 4 4 3A1089 3A1310 3A1430 3A1431 3A7560 3A1515 3A1432 3A1433 2 2 4 14 4 10 3 10 1 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 FSCM No. Capscrew, Hex Head, Class 2A - Grade 5, 3/8" X 2" Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2-3/4"* Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Reinforcing Plate Dust Cover * Spacer * Brake Assembly, See M1-25-8.0 Return Spring Spring Washer Cotter Pin* Attaching Stud Camshaft, R.H. Camshaft, L.H. Thrust Washer Grease Fitting "O"-Ring * Bushing * Grease Retainer Retainer Washer Snap Ring * Stud Washer Nut * Bushing * Grease Fitting, 1/8" -27 Dry seal PTF-SAE Short Slack Adjusted Bracket W/Bushing, R.H. Bracket W/Bushing, L.H. Bracket Spacer Spring Lockwasher, Medium Series, Carbon Steel, 3/4" Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/4" X 3-3/4" Retaining Washer Retaining Ring Stud * Washer * Nut * Stud * Taper Dowel Stud * Differential Carrier, See M1-24-83.0 * See Vendor Annex List For FSCFM NO. M1-24-79.0 (3 Of 3) 90483 90483 20859 * * * * * * * * * * * * 78385 * * * * 20859 90483 * * * TM 10-3950-263-14&P-3 Parts List M1-24-80.0 Rear Rear Drive Axle Assembly M1-24-80.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List Rear Rear Drive Axle Assembly - Continued REF. PART NO. QTY. DESCRIPTION ‘ 1 22A3149 1 Rear Rear Axle Assembly 2 3A4495 2 Internal Gear And Hub 3 3A4496 2 Hub * 4 3A4497 2 Gear * 5 3A5740 16 Screw * 6 3A4508 4 Spindle Nut * 7 3A4509 2 Nut Lock * 8 2 Planet Spider Assembly, See M1-24-41.0 9 3A1431 40 Washer * 10 3A5324 40 Capscrew* 11 3A4968 2 Sun Gear * 3A7556 2 Thrust Washer 12 3A4511 2 Snap Ring * 13 3A4512 2 Cap Washer 14 3A5326 2 Thrust Cap W/Washer 3A5327 2 "O"-Ring * 15 3A1284 12 Lockwasher* 16 3A9355 12 Capscrew* 17 3A4491 2 Planet Cover Plug 3A5391 2 Oil Level Plug 18 3A5342 2 Hub And Drum Assembly 19 3A1102 24 Bolt* 20 3A1076 24 Washer * 21 3A4500 2 Brake Drum 22 3A4501 2 Oil Catcher 23 3A5329 2 Hub And Cub Assembly 24 3A4503 2 Inner Cup 25 3A4504 2 Outer Cup 26 3A11O00 32 Wheel Stud 27 3A5328 2 Hub Oil Seal 28 3A4506 2 Inner Bearing Core 29 3A5391 2 Filler Plug 30 3A1325 24 Rim Lug 31 3A1115 24 Nut * 32 3A4510 2 Axle Shaft * 33 3A4507 2 Outer Bearing Core 34 3A1291 1 Breather * 35 3A5391 1 Filler Plug* 36 3A1310 2 Retaining Ring 37 3A1089 2 Retainer Washer 38 3A8714 1 Bracket W/Bushing L.H. 3A8715 1 Bracket W/Bushing R.H. 39 1X32 4 Spring Lockwasher, Medium Series, Carbon Steel, 3/4" 40 1X3802 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/4" x 3-3/4" 41 3A1313 2 Bushing * 42 1X812 2 Grease Fitting, 1/8" -27 Dry seal PTF-SAE Short 43 3A1094 2 Slack Adjuster 44 1X3757 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2" 1X3729 4 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2-3/4" 45 1X28 8 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" M1-24-80.0 (2 Of 3) FSCM No. 36422 * * * * * * * * * * * * * * * * * * * * * * * 20859 90483 78385 * 90483 90483 20859 TM 10-3950-263-14&P-3 Parts List M1-24-80.0 Rear Rear Drive Axle Assembly - Continued REF. PART NO. QTY. DESCRIPTION 46 3A1454 4 Dust Cover * 3A5399 2 Reinforcing Plate 47 3A1455 8 Spacer * 48 3A4515 2 Snap Ring * 49 3A1428 2 Retainer Washer 50 3A1711 2 Grease Retainer 51 3A4516 2 Bushing * 52 3A1173 2 "O"-Ring * 53 3A1679 2 Grease Fitting 54 3A1091 2 Thrust Washer 55 3A1467 1 Camshaft, L.H. 3A1468 1 Camshaft, R.H. 56 3A2895 2 Brake Return Spring 3A5733 4 Spring Washer 3A4518 4 Cotter Pin* 57 3A10961 32 Attaching Stud 58 2 Brake Assembly, See M1-25-8.0 59 3A10959 2 Spindle End* 3A5338 2 Spindle Sleeve 60 3A1332 32 Washer * 61 3A1087 32 Nut * 62 3A10964 1 Housing * 63 3A5391 1 Drain Plug * 64 3A1430 4 Differential Carrier Stud 65 3A7560 4 Nut * 66 3A1515 10 Nut * 67 3A1431 14 Washer * 68 3A1432 3 Taper Dowel 69 3A1433 10 Differential Carrier Stud 70 1 Differential Carrier Assembly, See M1-24-83.0 * See Vendor Annex List For FSCM No. M1-24-80.0 (3 Of 3) FSCM No. * * * * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 Parts List R1083 Differential Carrier Assembly M1-24-83.0 (1 Of 3) M1-24-83.0 TM 10-3950-263-14&P-3 Parts List R1083 Differential Carrier Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 3A5465 1 Differential Carrier Assembly, Front Rear 3A5466 1 Differential Carrier Assembly, Rear Rear 2 3A7620 1 Retaining Capscrew 3 3A1469 1 Retaining Washer 4 3A4971 1 Flange, Front Rear 3A1470 1 Flange, Rear Rear 5 1X2147 8 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1-1/4" lX540 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 5/8" 6 1X30 12 Spring Lockwasher, Medium Series, Carbon Steel Natural, 1/2" 7 3A1472 1 Retainer 8 3A1109 1 Oil Seal * 9 1X2280 1 Roller Bearing, Tapered Cup, Single Row, Type TS, Alloy Steel, 5.000 O.D. 10 3A1474 AR Retainer Shim, .004" 3A1475 AR Retainer Shim, .007" 3A1476 AR Retainer Shim, .010" 11 3A1477 1 Cap And Cover Assembly 12 3A1691 4 Cover Capscrew 13 1X2995 4 Lockwasher, Medium Series, Carbon Steel, Natural, 9/16" 14 3A1478 2 Dowel * 15 3A5345 4 Lockwasher 16 3A5344 4 Capscrew 17 3A7626 8 Nut * 18 1X2995 8 Lockwasher, Medium Series, Carbon Steel, Natural, 9/16" 19 1X2744 8 Capscrew, Hex Head, UNC Class 2A - Grade 5, 9/16" X2 20 3A1447 1 Cotter Pin* 21 3A1503 1 Bearing Cone - Outer 22 3A1504 1 Drop Gear * 23 lX2612 7 Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/8" X 1-1/2" 24 3A5343 1 Input Shaft * 25 3A1506 1 Inner Cone * 26 3A1507 1 Inner Cup * 27 3A1508 1 Thrust Screw 28 1X202 1 Jam Nut, Finished Hexagon, Steel, Zinc Plated, UNF-2B 1-1/4" 29 3A1121 12 Ring Gear Bolt 30 3A7622 Ring Gear Nut 31 3A1120 1 Ring Gear And Pinion 32 3A7627 Differential Body Assembly 33 3A5887 1 Differential Case Assembly 34 3A5886 8 Bolt* 3A1 076 8 Washer * 3 53A7624 8 Nut * 3A1076 8 Washer * 36 3A5458 4 Inner Roller Spacer 37 3A5890 8 Center Roller Spacer M1-24-83.0 (2 of 3) FSCM No. * * * * * * 90483 90483 20859 * 19382 * * * * * 20859 * * 20859 90483 * 90483 * 90483 * * * * * * * Parts List R1083 Differential Carrier Assembly - Continued REF. PART NO. QTY. DESCRIPTION 38 39 40 41 42 43 44 45 46 3A9565 3A5891 3A5889 3A5888 3A9565 3A1487 3A1489 1X2574 1X28 1 4 248 1 2 2 1 2 2 47 48 49 50 3A7625 3A5352 3A1491 lX2112 2 2 2 2 51 52 53 54 55 56 3A1493 3A1494 3A1495 3A5459 3A5460 3A1498 3Al499 1X3302 1 1 AR AR AR 1 2 1 57 58 59 60 3A1500 3A1501 3A1362 3A1363 1 1 1 1 TM 10-3950-263-14&P-3 M1-24-83.0 FSCM No. Pinion Set, Includes Item #43 Thrust Washer Roller Spider * Side Gear, Includes Item #39 Thrust Washer Pinion Bearing Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Nut Lock * Adjusting Nut Bearing Cup Tapered Roller Bearing Cone, Single Row, Type TS, Rings & Rollers - High Carbon Chromium, Cage - Low Carbon Steel, 3.250" I.D. Bearing Cone Spacer & Shim Kit Shim, .004" * Shim, .007" * Shim, .010" Pinion Cage Cup Assembly Bearing Cup Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" x 2-3/4" Bearing Cone Drop Gear * Washer * Nut * * See Vendor Annex List For FSCM NO. M1-24-83.0 (3 Of 3) * * * * * 90483 20859 * * 19382 * * * * * * * 90483 * TM 10-3950-263-14&P-3 Parts List M1-25-8.0 Wheel Brake Assembly M1-25-8.0 (1 of 2) TM 10-390-263-14&P-3 TM 10-3950-263-14&P-3 Parts List Wheel Brake Assembly - Continued REF. PART NO. QTY. DESCRIPTION 10 11 12 13 14 3A10960 3A10962 3A10588 3A1107 3A8950 3A8976 3A2892 3A5357 3A5356 3A2898 3A7628 3A10963 3A1174 3A2896 3A2893 1X167 1 1 2 1 32 32 1 1 1 2 2 32 32 1 1 2 15 1X28 2 16 17 3A2890 3A2894 2 2 1 2 3 4 5 6 7 8 9 FSCM No. Brake Assembly Brake Spider Brake Shoe Assembly Brake Cam Roller Nut * Washer * Pin * Lock Pin Lock Pin Lining - Standard (.735-.720) Lining - Optional (.860-.845) Bolt* Lining Plug Spring Anchor Pin Brake Shoe Bushing* Nut, Finished Hexagon, American Standard, Fine Thread, Carbon Steel, 3/8" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Anchor Pin Setscrew Anchor Pin * M1-25-8.0 (2 of 2) * * * * * * * * * * 90483 20589 * TM 10-3950-263-14&P-3 Parts List R583 M1-27-1 19.0 Air Lines And Controls W/Box Beam Carrier M1-27-119.0 (1 of 6 ) TM 10-3950-263-14&P-3 Parts List R583 Air Lines and Controls W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION Note: Items 1-10 Are Located Behind The Dash In The Carrier Cab. 1 1X4740 6 Elbow, 900 Male, Brass, 3/8" X 1/8" 2 18A247 1 Control Valve 3 1X823 3 Pipe Plug, Hex. Socket, Heat Treated, Alloy Steel, 1/8" 4 1X2004 1 Caplug, Polyethylene, Low Density, Series "T" Tapered #13 5 1X4727 7 Connector, Male, Brass, 3/8" X 3/8" 6 AC3675 7 Coupling 36422 7 810040001 AR Thermoplastic Air Brake, Tubing, To Meet DOT Federal Motor Vehicle Safety Standard No. 106, 3/8" O.D. X .250" I.D., SAE J844 Type B 8 18A248 1 Control Valve 9 1X854 2 Reducer Coupling, Malleable Iron, Black 1/4" X 1/8" 1X4752 2 Tee, Male Run, Brass, 3/8" X 1/4" X 3/8" 10 1X4779 1 Connector Female, Brass, 3/8" X 1/8" Note: Items 11-86 Are Located On The Carrier Frame. 11 1X4727 2 Connector, Male, Brass, 3/8" X 3/8" AC3675 2 Coupling 36422 1X4738 2 Elbow, 900 Male, Brass, 3/8" X 3/8" 12 1X4746 2 Elbow, 450 Male, Brass, 3/8" X 1/4" 1X891 2 Pipe Reducer Bushing, Hex. Head, Steel, 3/8" X 1/4" AC3675 2 Coupling 36422 1X4738 2 Elbow, 900 Male, Brass, 3/8" X 3/8" 13 1X4727 2 Connector, Male, Brass, 3/8" X 3/8" AC3675 1 Coupling 36422 14 1X4753 1 Tee, Male Run, Brass, 1/2" X 3/8" X 3/8" JR880 1 Tee 36422 1X4752 1 Tee, Male Run, Brass, 3/8" X 1/4" X 3/8" 90° 1X4737 1 Elbow, Male, Brass, 5/8" X 3/8" 1X2168 1 Pipe Reducer Bushing, Carbon Steel, 3/8" X 1/4" AC3675 1 Coupling 36422 90° 15 1X5722 2 Elbow, Male, Brass, 5/8" X 3/4" 90° Street Elbow, Steel, 38" 16 1X1911 1 1X2168 1 Pipe Reducer Bushing, Carbon Steel, 3/8" X 1/4" 8A2431 1 Tee, 1/4" X 1/4" X 1/4" 8A2223 1 Safety Valve 17 1X4738 2 Elbow, 900 Male, Brass, 3/8" X 3/8" 18 18A382 12 Mounting Strap 1X3721 24 Capscrew, Hex. Head, UNC Class 2A, Grade 8, 3/8" X 1-1/2" 1X6081 24 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34, UNC-3B, 3/8" 19 18A280 5 Reservoir 36422 8A2695 5 Drain Cock 36422 20 AC4079 1 Elbow, 5/8" X 3/4" 21 1X4737 4 Elbow, 900 Male, Brass, 5/8" X 3/8" 22 1X897 1 Pipe Reducer Bushing, Hex. Head, Steel, 3/4" X 1/2" 1X4739 1 Elbow, 90° Male, Brass, 3/4" X 1/2" 23 JR880 1 Tee 36422 M1-27-119.0 (2 of 6) FSCM No. 09505 36422 09505 99017 09505 06229 36422 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 09505 36422 36422 09505 36422 90483 72968 36422 09505 09505 09505 TM 10-3950-263-14&P-3 Parts List R583 Air Lines And Controls W/Box Beam Carrier - Continued M1-27-119.0 (3 of 6) M 1-27-119.0 TM 10-3950-263-14&P-3 Parts List R583 Air Lines and Controls W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION 1X4760 1 Connector, Male, Brass, 5/8" X 3/8" 1X4727 1 Connector, Male, Brass, 3/8" X 3/8" 1X856 1 Reducer Coupling, Malleable Iron, Black, 3/8" X 1/4" 1X967 1 Pipe Nipple, Standard Weight, Wrought Steel, Black 1/4" X 7/8" 09505 24 1X1853 1 Pipe Tee, Female, Carbon Steel, Zinc Plated, 1/2" 1X4730 1 Connector, Male, Brass, 3/8" X 1/2" 1X2743 1 Pipe Reducer Bushing, Carbon Steel, 1/2" X 3/8" 1X4737 1 Elbow, 90° Male, Brass, 5/8" X 3/8" 25 1X967 1 Pipe Nipple, Standard Weight, Wrought Steel, Black, 1/4" X 7/8" 09505 1X892 1 Pipe Reducer Bushing, Hex. Head, Steel, 1/2" X 1/4" 12A528 1 Check Valve 26 1X4737 1 Elbow, 90° Male, Brass, 5/8" X 3/8" 1X897 1 Pipe Reducer Bushing, Hex. Head, Steel, 3/4" X 1/2" 27 1X828 5 Pipe Plug, Square Head, Steel, 3/8" 28 1X830 2 Pipe Plug, Square Head, Steel, 3/4" 29 AC3689 2 Service Outlet AC3675 2 Coupling 36422 1X4735 2 Elbow, 90°Male, Brass, 1/2" X 3/8" 30 1X4753 1 Tee, Male Run, 1/2" X 3/8" X 3/8" AC3675 1 Coupling 09505 1X4735 1 Elbow, 900 Male, Brass, 1/2" X 3/8" 31 22A1917 1 Hose Assembly (To Front Of Transmission) 32 22A1917 1 Hose Assembly (To Rear Of Transmission) 33 1X4726 2 Connector, Male, Brass, 3/8" X 1/4" AC291 2 Coupling 36422 34 8A5733 1 Hose Assembly (To Air Filter On Main Transmission) 35 1X4727 1 Connector, Male, Brass, 3/8" X 3/8" 1X842 1 Pipe Coupling, Carbon Steel, Black, 3/8" 36 1X4728 1 Connector, Male, Brass, 1/2" X 3/8" AC3675 1 Coupling 36422 1X4735 1 Elbow, 900 Male, Brass, 1/2" X 3/8" 37 AC3675 4 Coupling 36422 1X4728 4 Connector, Male Brass, 1/2" X 3/8" 1X933 2 Street Elbow, 45°, Malleable Iron, Black, 3/8" (Left Side Only) 38 18A4479 4 Hose Assembly 39 JR895 4 Elbow, 900 Street, 1/4" 40 4 Air Chamber - See Keysheet M1-3-29.0 "Front Brakes" 41 8A2224 1 Governor 36422 42 HC2653 1 Gasket 36422 43 JC845 1 Elbow, Male, Brass, 1/4" X 1/8" 44 HC2654 2 Capscrew36422 45 Reference Only (To Low Pressure Switch On Left Hand Side Panel) 46 1X4728 1 Connector, Male, Brass, 1/2" X 3/8" AC3675 1 Coupling 36422 1X4758 1 Tee, Male Branch, Brass, 3/8" 47 1X4728 1 Connector, Male, Brass, 1/2" X 3/8" 48 AC4562 1 Treadle Valve 1X6709 3 Hex. Capscrew, UNC Class 2A, Grade 8, Steel, 5/16" X 1" M1-27-119.0 (4 of 6) FSCM No. 09505 09505 09505 09505 09505 09505 09505 09505 36422 09505 09505 09505 09505 36422 09505 09505 09505 36422 36422 09505 36422 09505 09505 09505 09505 09505 09505 36422 63422 09505 09505 09505 09505 36422 90483 Parts List R583 Air Lines And Controls W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION 1X6954 3 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34, UNC-3B, 5/16" 49 22A1917 1 Hose Assembly (To Carrier Seat) 50 1X4731 1 Connector, Male, Brass, 1/4" X 1/4" 51 1X8911 Pipe Reducer Bushing, Hex. Head, Steel, 3/8" X 1/4" 52 AC3675 1 Coupling 36422 53 1X4738 1 Elbow, 900 Male, Brass, 3/8" X 3/8" 54 1X8281 Pipe Plug, Square Head, Steel, 3/8" 55 AC4563 1 Stop Light Switch (Near Side) 90° 1X4738 1 Elbow, Male, Brass, 3/8" X 3/8" (Opposite Side) 56 1X8291 Pipe Plug, Square Head, Steel, 1/2" 90° 57 1X4736 1 Elbow, Male, Brass, 3/8" X 1/4" (Near Side) 1X8271 Pipe Plug, Square Head, Steel, 1/4" (Opposite Side) 58 1X4729 1 Connector, Male, Brass, 1/2" X 1/2" 59 lX47277 Connector, Male, Brass, 3/8" X 3/8" 60 28A3201 4 Relay Valve36422 18A2816 8 Hex. Capscrew, UNC Class 2A, Grade 8, Steel, 3/8" X 1-1/2" 90483 1X6081 8 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-24, UNC-3B, 3/8" 61 1X8288 Pipe Plug, Square Head, Steel, 3/8" 62 1X4739 4 Elbow, 900 Male, Brass, 3/4" X 1/2" 90° 63 lX47354 Elbow, Male, Brass, 1/2" X 3/8" 90° 64 1X4736 4 Elbow, Male, Brass, 3/8" X 1/4" 65 1X4755 3 Union Tee, Brass, 3/8" X 3/8" X 3/8" 66 Ref 1 Compressor 67 18A3015 1 Elbow 36422 18A3014 1 Discharge Fitting 1X6496 2 Hex. Capscrew, UNC Class 2A, Grade 8, 5/16" X 3/4" AC3696 1 Gasket 36422 68 1X4732 1 Connector, Male, Brass, 3/4" X 1/2" 37A545 1 Coupling 36422 1X4739 1 Elbow, 900 Male, Brass, 3/4" X 1/2" 69 22A766 1 Pressure Reducing Valve lX69191 Hex. Capscrew, UNC Class 2A, Grade 8, Steel, 1/4" X 3" 1X6488 1 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34, UNC - 3B, 1/4" 70 lX47392 Elbow, 900 Male, Brass, 3/4" X 1/2" 37A545 1 Coupling 36422 71 1X4760 1 Connector, Male, Brass, 5/8" X 3/8" AC3675 1 Coupling 09505 90° 1X4737 1 Elbow, Male, Brass, 5/8" X 3/8" 72 1X4738 1 Elbow, 900 Male, Brass, 3/8" X 3/8" 1X8931 Pipe Reducer Bushing, Hex Head, Steel, 1/2" X 3/8" 12A528 1 Check Valve 1X8971 Pipe Reducer Bushing, Hex. Head, Steel, 3/4" X 1/2" 73 lX896 1 Pipe Reducer Bushing, Hex. Head, Steel, 3/4" X 3/8" JR8801 Tee 36422 1X4727 1 Connector, Male, Brass, 3/8" X 3/8" 1X4760 1 Connector, Male, Brass, 5/8" X 3/8" 74 1X4732 2 Connector, Male, Brass, 3/4" X 1/2" 1X8972 Pipe Reducer Bushing, Hex Head, Steel, 3/4" X 1/2" 75 22A2797 6 Hose Assembly M1-27-119.0 (5 of 6 ) TM 10-3950-263-14&P-3 M1-27-119.0 FSCM No. 72968 36422 09505 09505 09505 09505 63422 09505 09505 09505 09505 09505 09505 72968 09505 09505 09505 09505 09505 36422 90483 09505 09505 36422 90483 72968 09505 09505 09505 09505 09505 36422 09505 09505 09505 09505 09505 09505 36422 TM 10-3950-263-14&P-3 Parts List R283 Air Lines And Controls W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION 76 4 Safety Actuator - See Keysheet M1-27-127.0 1X1984 Hexagon Jam Nut, 5/8", UNF-2B, Steel, Zinc Plates 1A4276 4 Yoke 36422 77 18A4480 6 Hose Assembly 90° 78 lX47632 Elbow, Male, Brass, 1/2" X 1/4" 79 18A246 2 Inversion Valve 80 JR8958 Elbow, 900 Street, 1/4" 90° 81 1X4736 2 Elbow, Male, Brass, 3/8" X 1/4" 90° 82 JR8954 Elbow, Street, 1/4" lX891 4 Pipe Reducer Bushing, Hex. Head, Steel, 3/8" X 1/4" 83 1X4730 1 Connector, Male, Brass, 5/8" X 1/2" 1X8971 Pipe Reducer, Bushing Hex. Head, Steel, 3/4" X 1/2" 84 1X4754 1 Tee, Male Run, Brass, 1/2" X 3/8" 1X8961 Pipe Reducer Bushing, Hex. Head, Steel, 3/4" X 3/8" 85 1A3051 1 Reservoir 36422 8A2695 1 Drain Cock 63422 1X8921 Pipe Reducer Bushing, Hex. Head, Steel, 1/2" X 1/4" 86 JR89512 Elbow, 900 Street, 1/4" A 810040001 AR Thermoplastic Air Brake Tubing, To Meet DOT Federal Motor Vehicle Safety Standard No. 106, 3/8" O.D. X 250" I.D., SAE J844, Type B B 810040002 AR Thermoplastic Air Brake Tubing, To Meet DOT Federal Motor Vehicle Safety Standard No. 106, 1/2" O.D. X .375" I.D., SAE J844, Type B 06229 C 810040003 AR Thermoplastic Air Brake Tubing, To Meet DOT Federal Motor Vehicle Safety Standard No. 106, 5/8" O.D. X .441" I.D., SAE J844, Type B D 810040004 AR Thermoplastic Air Brake Tubing, To Meet DOT Federal Motor Vehicle Safety Standard No. 106, 3/4" O.D. X .566" I.D., SAE J844, Type B E 866002001 AR Round Copper Tubing, Soft Annealed Conform To SAE J1149, Type 1, 1/4" O.D 84854 F 866002006 AR Round Copper Tubing, Soft Annealed, Conform To SAE J1149, Type 1, 5/8" O.D 84854 Hose # Description (1) Transmission (Rear) (3) Service (4) Emergency Reservoir (5) Inversion Valve (6) Transmission (7) Wet Reservoir (8) Treadle Valve Ml-27-119.0 (6 of 6) FSCM No. 90483 36422 09505 36422 36422 09505 36422 09505 09505 09505 09505 09505 09505 36422 06229 06229 06229 Parts List Safety Actuator REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 18A4728 18A4729 3A10053 A11622 A11623 A11624 3A10066 3A10054 116232 A11624 A11625 3A10058 3A10059 3A10060 3A11629 3A11626 3A11632 A11633 3A11628 3A11627 3A10051 3A10052 R482 QTY. 1 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 DESCRIPTION Safety Actuator (Left Side) - Two Required Safety Actuator (Right Side) - Two Required Clamp Ring Assembly Clamp Ring Bolt* Nut * Service Pressure Plate Clamp Ring Assembly Bolt* Nut * Clamp Ring Nylon Bearing "O" Ring Piston * Non-Pressure Plate Assembly Pipe Plug Non-Pressure Plate Lube Fitting (Not Shown) Stud Diaphragm Retainer Lockwasher Nut * M1-27-127.0 (1 ,Of 2) TM 10-3950-263-14&P-3 M1-27-127.0 FSCM No. 36422 36422 * * * * * * * * * * * * * * TM 10-3950-263-14&P-3 Parts List R284 Safety Actuator - Continued REF. PART NO. QTY. DESCRIPTION 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3A10061 3A10070 3A10064 3A10065 3A10052 3A11630 3A10069 3A10078 3A10073 3A10074 3A10079 3A10084 3A10075 3A10082 3A10080 3A10067 3A10072 3A10056 3A10062 3A10063 3A10083 1A4276 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 1 1 1 FSCM No. Collar "O" Ring Washer Boot Yoke Nut Push Rod Splash Guard Gasket Diaphragm Washer Screw Diaphragm Auxiliary Pressure Plate Service Diaphragm Shaft Auxiliary Diaphragm Spring Diaphragm Separator Retaining Ring Roller Roller Spring Cap Complete Yoke W/Pin * See Vendor Annex List For FSCM NO. M1-27-127.0 (2 Of 2) * * * * * * * * * * * * * * * * * * * * * 36422 TM 10-3950-263-14&P-3 M1-29-19.0 Parts List Rear Suspension REF. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. 18A4460 3A3105 3A7207 3A1277 3A7206 3A7208 18A4461 3A8302 3A1265 3A1266 3A1264 3A1263 3A3104 1X1095 3A1267 3A1268 3A1253 AC4094 1x110 8 QTY. DESCRIPTION 1 Boggie Beam Assembly 2 Torque Rod 4 Bolt* 4 Nut * 4 Adapter * 2 Bushing (Axle Connections Only) 2 Equalizer Beam 2 Bushing (This is a Two-Piece Assembly) 8 Retainer * 8 Spring * 4 Felt * 4 Stud * 8 Nut * 8 Cotter Pin, Extended Prong, Square Cut, 3/16" X 2-1/2" 1 Center Pin 2 Thrust Washer 1 Bushing * 8 Bolt 36422 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNF-3B, 7/8" * See Vendor Annex List For FSCM No. M1-29-19.0 (1 Of 1) FSCM No. 36422 * * 36422 * 20859 * * 72968 TM 10-3950-263-14&P-3 M1-38-69.0 Parts List Outrigger Throttle Controls REF. 1 PART NO. 810040001 2 3 4 5 6 7 lX47361 19A1144 1X4740 19A1985 1X4102 1X2680 8 9 lX25811 1X3809 10 11 1X4727 AC3675 QTY. DESCRIPTION AR Nylon Air Brake Tubing, Heat And Light Resistant, 1/4"0.D X .040" Wall, 4’ Elbow, 900 Male, Brass, 3/8" X 1/4" 1 Target 36422 90° 1 Elbow, Male, Brass, 3/8" X 1/8" 1 Air Cylinder 36422 1 Lockwasher, External Tooth, Carbon Steel, Type A, 5/8" 1 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert UNF-3B, 5/16H Hexagon Jam Nut, 5/16" UNF-2B, Steel, Zinc Plated 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32 Nylon Insert, UNC-3B, 3/8" 2 Male Connector, Brass, 3/8" X 3/8" 1 Anchor Coupling M1-38-69.0 (1 Of 1) FSCM No. 06229 09505 09505 20859 72968 90483 72968 09505 36422 TM 10-3950-263-14&P-3 Parts List Bumper Outrigger Lines W/Box Beam Carrier R284 M1-38-95.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List R1083 Bumper Outrigger Lines W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION 90° 37° 1 1X3546 2 Elbow, Swivel Nut, Flare, Steel, 3/4" X 1-1/16" 2 1X4472 1 Connector, Straight Thread, Steel, Zinc Plated W/"O" 09505 Ring 3/4" X 1-5/16" -12 3 Hydraulic Reservoir, See Keysheet M1-39-38.0 4 18J1351 1 Tube Assembly 5 18J1353 1 Tube Assembly 6 26F435 Clamp Assembly 36422 7 18J1349 1 Tube Assembly 8 1X4705 2 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 1/2" 9 1X4602 2 Elbow, 450 Swivel Nut, 370 Flare, Steel, 1-1/4" X 1-5/8"-12 10 1X2757 1 Connector, Straight Thread, Steel, Zinc Plated W/"O" Ring, 09505 1-1/4" X 1-7/8" 11 1X3599 8 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/4 1X1351 8 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 1X3809 8 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 12 1X2702 2 Elbow, Union 900,37° Flare, Steel, Zinc Plated, 3/4" 13 38J190 1 Hose Assembly 90° 14 1X2810 2 Elbow, Straight Thread, Steel, W/Locknut, Washer & "O" Ring, 1/2" X 3/4" 15 36J211 6 Clamp Assembly 16 1 Bumper Jack Cylinder, See M1-46-31.0 17 1X3918 7 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/2" 18 1X2735 3 Union, 370 Flare, Steel, 3/4" 19 P.T.O. Assembly, M1-41-3.0 20 18A4612 1 Hose Assembly 21 18J1504 2 Hose Assembly 22 22A3128 1 Tube Assembly 23 22A3134 1 Tube Assembly 24 1X2756 2 Connector, Straight Thread, Steel, Zinc Plated, W/"O" Ring, 1/2" X 3/4" 25 1X4323 2 Connector, Straight Thread, Steel, Zinc Plated, W!/"O" Ring, 3/4" X 3/4" 26 2 Valve Stack, See M1-43-22.0 1X5138 8 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 3/4" 90°, 37° Flare, Steel, Zinc Plated, 1/2" 27 lX11624 Elbow, Union 37° 28 1X3276 1 Swivel Nut Run Tee, Flare, Steel, 1/2" JR8621 Cap 36422 29 26F431 Clamp Assembly (Large) 36J211 2 Clamp Assembly (Small) 30 18A270C 1 Elbow (Inlet Port) 31 18A2694 1 Hose Assembly 32 25J640 1 Clamp Assembly 33 18J1 34C 1 Bracket 36422 34 18J296 2 Tube Assembly 35 1X1157 2 Union, 370 Flare, Steel, 1/2" 36 22J641 2 Tube Assembly M1-38-95.0 (2 of 3) FSCM No. 09505 36422 36422 36422 72968 09505 90483 86157 72968 09505 36422 36422 72968 09505 36422 36422 36422 36422 09505 09505 72968 09505 09505 36422 36422 36422 36422 36422 36422 09505 36422 Parts List R1083 Bumper Outrigger Lines W/Box Beam Carrier - Continued REF. PART NO. QTY. DESCRIPTION 37 38 39 40 41 42 43 22A3130 22A3138 lX44711 3/4" 1X3659 18J1494 1X3546 19A580 1X4767 49 50 51 1X4073 22A2424 1X3546 19A580 1X3546 22A3132 18J1500 1X2690 1X5073 22A3140 1X2703 1X3248 52 1X3339 1X3248 53 1X3199 54 55 28J2385 44 45 46 47 48 11X4226 56 57 26A472 18J1355 1 Tube Assembly 1 Tube Assembly 37° Tee, Swivel Nut Branch, Flare, Steel, Zinc Plated, 37° 2 Tee, Swivel Nut Run, Flare, Steel, Zinc Plated, 3/4" 1 Tube Assembly 90° 37° 2 Elbow, Swivel Nut, Flare, Steel, 3/4" X 1-1/16" 2 Connector 36422 1 Connector, Straight Thread, Steel, Zinc Plated, W/"O" Ring, 3/8" 90° 1 Elbow, Swivel Nut, 370 Flare, Steel, 3/8" X 9/16" 1 Tube Assembly 90° 1 Elbow, Swivel Nut, 370 Flare, Steel, 3/4" X 1-1/16" 1 Connector 36422 1 Elbow, 900 Swivel Nut, 370 Flare, Steel, 3/4" X 1-1/16" 1 Tube Assembly 1 Tube Assembly 1 Tube Nut, 370 Flare, Steel, Zinc Plated, 3/4" 1 Tube End Reducer, 370 Flare, Steel, 3/4" X 3/8" 1 Tube Assembly 1 Union Tee, 370 Flare, Steel, 3/4" 1 Connector, Straight Thread, Steel, Zinc Plated, W/"O" Ring, 5/8" X 3/4" -16 90° 1 Elbow, Swivel Nut, 370 Flare, Steel, 5/8" X 7/8" 1 Connector, Straight Thread, Steel, Zinc Plated, W/"O" Ring, 5/8" X 3/4" -16 1 Elbow, 900 Straight Thread, Steel, W/Locknut, Washer & "O" Ring, 5/8" X 7/8" 1 Pressure Switch Lock Valve, See M1-44-4.0 5 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 2" 2 Hose Assembly 1 Tube Assembly M1-38-95.0 (3 of 3) TM 10-3950-263-14&P-3 M1-38-95.0 FSCM No. 36422 36422 09505 09505 36422 09505 09505 09505 36422 09505 09505 36422 36422 09505 09505 36422 09505 09505 09505 09505 09505 36422 72968 36422 36422 Parts List Outrigger Hydraulic Lines On Carrier R M1-38-96.0 (1 of 41 TM 10-3950-263-14&P-3 M1-38-96.0 TM 10-3950-263-14&P-3 Parts List Outrigger Hydraulic Lines On Carrier - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 18A4684 18A4682 18A4680 19A580 22A3122 1X2756 7 8 9 10 11 12 13 14 15 16 17 18A4690 18A4692 18A4694 18A4688 18J1240 18J1238 18J1236 18J1234 1X2735 18J1228 26F4338 36J211 18J1268 18J1270 18J1252 18J1580 18A4706 18A4710 18A4708 18A4704 lX27028 lX11628 18A4700 18A4696 18A4698 18A4702 18J1244 18J1248 1X1157 18J1256 18J1280 18J1282 18J1222 18J1232 18J1226 18J1220 18J1230 18A4686 18J1274 18J1272 18J1276 18J1278 1X2743 1X5074 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 8 Connector 36422 8 Tube Assembly 8 Connector, Straight Thread, Steel, Zinc Plated, W/O-Ring 1/2" x 3/4" - 16 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 36422 1 Tube Assembly 36422 1 Tube Assembly 36422 1 Tube Assembly 1 Tube Assembly 24 Union, 370 Flare, Steel, 3/4" 4 Tube Assembly Clamp Assembly (Large) 38 Clamp Assembly (Small) 1 Tube Assembly 1 Tube Assembly 4 Tube Assembly 4 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly Elbow, Union 90°, 370 Flare, Steel, Zinc Plated, 3/4" Elbow, Union 90°, 370 Flare, Steel, Zinc Plated, 1/2" 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 3 Tube Assembly 26 Union, 37 Flare, Steel, 1/2" 4 Tube Assembly 1 Tube Assembly 1 Tube Assembly 4 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 1 Tube Assembly 8 Pipe Reducer Bushing, Carbon Steel, 1/2"x3/8U 8 Bulkhead, Straight, Steel, Cadium Plated, ANSI Spec B2.2-1965 Threads, 1/2" M1-38-96.0 (2 of 4) FSCM No. 36422 36422 36422 36422 09505 36422 36422 36422 36422 36422 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 09505 36422 36422 36422 36422 36422 36422 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 09505 Parts List Outrigger Hydraulic Lines On Carrier - Continued M1-38-96.0 (3 of 4) TM 10-3950-263-14&P-3 M1-38-96.0 TM 10-3950-263-14&P-3 Parts List Outrigger Hydraulic Lines On Carrier REF. PART NO. QTY. DESCRIPTION 49 22A3127 4 Bracket 36422 lX33028 Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2"xl-1/2" lX38088 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B 1/2" 50 1X3546 8 900 Swivel Nut Elbow, 370 Flare, Steel, 3/4"xl-1/16"-12 51 lX50758 Bulkhead, Straight, Steel, Cadium Plated, ANSI Spec B2.2-1965 Threads, 3/4" 52 22A3124 8 Tube Assembly 53 18J1202 1 Tube Assembly 54 18J1214 1 Tube Assembly 55 18J1208 1 Tube Assembly 56 18J1224 1 Tube Assembly 57 18J1218 1 Tube Assembly 58 18J1198 1 Tube Assembly 59 18J1196 1 Tube Assembly 60 18J1206 1 Tube Assembly 61 18J1186 1 Tube Assembly 36422 62 18J1184 1 Tube Assembly Function Jack Extend Jack Retract Circuit (A) (B) Beam Extend Beam Retract (C) (D) Function Jack Extend Jack Retract Circuit (A) (B) Beam Extend Beam Retract (C) (D) Hose Connection Chart Left Front Right Front Jack Jack (7) (11) (6) (10) Left Front Right Front Beam Beam (15) (19) (14) (18) Quick Disconnects Part No Desc 18A788 Nipple 18A786 Coupler 18A2061 31A242 Nipple Coupler M1-38-96.0 (4 of 4) FSCFM # 36422 36422 36422 36422 Left Rear Jack (9) (8) Left Rear Beam (13) (12) FSCM No. 90483 72968 09505 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 Right Rear Jack (5) (4) Right Rear Beam (17) (16) Dust Caps And Plugs Part No Desc FSCM# 18A789 Dust Cap 36422 18A787 Dust Plug 36422 18A2064 18A2063 Dust Cap Dust Plug 36422 36422 TM 10-3950-263-14&P-3 Parts List [Outrigger Electrical Controls & Installation M1-38-104,0 (1 of 4) TM 10-3950-263-14&P-3 Parts List Outrigger Electrical Controls & Installation - Continued REF. PART NO. QTY. DESCRIPTION 1 JC2275 2 Tube Clamp lX47052 Locking Capscrew, Hex Head UNC Class 2A-Grade 5, 1/4"xl/2" 2 JC2275 5 Tube Clamp 3 22A2442 1 Wire Harness 4 25J121 60 Cable Tie 36422 5 22A2498 1 Bracket 36422 1X4705 4 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4"xl/2" RC2303 Terminal Block 36422 1X5519 9 Machine Screw, Socket Button Head, Steel, UNC Class 3A, #8 x 3/8" 90483 22A2499 1 Cover 36422 lX47056 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4"xl/2" 1X2 6 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" 6 18R481 Wire Harness 36422 7 1J484 8 Tube Clamp 36422 8 lX47052 Locking Capscrew; Hex Head, UNC Class 2A-Grade 5, 1/4"xl/2" 9 18R461 Wire Harness 36422 10 18R471 Wire Harness 36422 11 28A901 1 Cover 36422 12 18M1116 1 Rubber Grommet 13 18A2676 1 Toggle Switch 14 19A721 1 Plug Button 36422 15 28J964 1 Bracket 36422 16 1X3743 3 Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" x 1" 1X5079 3 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC 3B, 1/4" 17 12H502 Gasket 36422 18 PC2622 Padlock & Key 36422 19 28A902 ’1 Switch Cover 22A2591 1 Label 36422 20 1 3/4" Valve Stack (See Keysheet M1-43-22.0) 21 1 3/8" Valve Stack (See Keysheet M1-43-22.0) 22 1X4868 4 Capscrew, Hex Head, UNC Class 2A-Grade 5, 5/16" x 4" 1X5080 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC 3B, 5/16" 23 RA88 2 Connector 36422 24 22A2513 2 Control Box 36422 22A2591 2 Label - Caution 25 HC2273 1 Push Button Switch 26 28A963 2 Toggle Switch 27 18A2676 2 Toggle Switch 28 18A1890 2 Toggle Switch 29 22A2433 1 Label 36422 30 1 Solenoid Valve (See Keysheet L.H. Side Panel M1-71-29.0) 31 29R388 Terminal Strap, 3/4" 36422 32 29R398 Terminal Strap, 3/8" 36422 1-38-104.0 (2 of 4) FSCM No. 36422 72968 36422 36422 72968 72968 86157 72968 36422 36422 90483 72968 36422 90483 72968 36422 36422 36422 36422 36422 Parts List Outrigger Electrical Controls & Installation - Continued M1-38-104.0 (3 of 4) TM 10-3950-263-14&P-3 M1-38-104.0 TM 10-3950-263-14&P-3 Parts List Outrigger Electrical Controls & Installation - Continued Wire No Color Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Orange Green Yellow Green Yellow Green Yellow Green Yellow Green Yellow Brown Red Brown Red Brown Red Brown Red White Blue Black Black Blocking Valve Front Bumper Jack, Retract Front Bumper Jack, Extend Right Rear Jack, Retract Right Rear Jack, Extend Left Front Jack, Retract Left Front Jack, Extend Left Rear Jack, Retract Left Rear Jack, Extend Right Front Jack, Retract Right Font Jack, Extend Left Rear Beam, Retract Left Rear Beam, Extend Left Front Beam, Retract Left Front Beam, Extend Right Rear Beam, Retract Right Rear Beam, Extend Right Front Beam, Retract Right Front Beam, Extend Power Throttle Ground Signal To Horn Relay From Pressure Switch M1-38-104.0 (4 of 4) TM 10-3950-263-14&P-3 Parts List Hydraulic Reservoir Assembly R284 M1-39-38.0 (1 Of 2) M1-39-38.0 TM 10-3950-263-14&P-3 Parts List R1083 Hydraulic Reservoir Assembly - Continued REF. PART NO. QTY. DESCRIPTION 22A3176 1 Reservoir Assembly 1 1X4025* 1 Plug, Hex Head "O" Ring Boss, Steel, Zinc Plated, 1-5/16" (Storage Only) 36J748* 1 "0" Ring (Storage Only) 2 25J675 1 Filter Assembly 3 17J328 1 Cover Plate 36422 23J83 1 Gasket 36422 4 1X4356* 32 Sealing Capscrew, Hex Head, UNC Class 2A - Grade 5, Medium Carbon Steel, Zinc Plated, Plastic Patch, 3/8" X 1" 72968 1X4* 32 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 86157 5 20J2232 1 Label - Filter Service 6 18A4651 1 Filler - Breather Assembly 1X5491 6 Locking Capscrew, Hexagon, Socket Head W/Plastic Patch, UNRC - Class 2A, Alloy Steel, #10 X 1/2" 7 18A4642 1 Cover 36422 22A2535 1 Gasket 36422 8 22A2544 1 Spring 36422 1X5478* 2 Locking Capscrew, Hexagon, Socket Head W/Plastic Patch, UNRC - Class 2A, Alloy Steel, 1/4" X 3/4" 9 1X2770* 1 Plug, Hex Head, "O" Ring Boss, Steel, Zinc Plated, 1-7/8" (Storage Only) 20J773* 1 "O" Ring (Storage Only) 10 1X5165* 1 Plug, Magnetic, Capscrew Type, Steel, 1-1/4" 22A2580* 1 Washer 36422 11 22A2534 1 Strainer Element Assembly 12 22A3175 1 Reservoir 36422 13 22A2567* 1 Plug 36422 1J2700* 1 "O" Ring 36422 Reservoir Parts Kit 18A4727 M1-39-38.0 (2 Of 2) FSCM No. 36422 09505 36422 36422 36422 36422 72968 72968 09505 36422 36540 36422 36422 TM 10-3950-263-14&P-3 M1-40-4.0 Parts List Pump And Controls, Hydraulic Outriggers REF. 1 2 3 4 5 6 7 8 PART NO. AC5493 lX17522 18A3359 18M1116 9A4691 22A823 25J121 39J218 18A3116 lX51312 QTY. DESCRIPTION 2 Capscrew 36422 Locknut, Nylon Insert, NC-3, Carbon Steel, Zinc Plated, /4"72968 1 Bracket 36422 1 Rubber Grommet Rubber Grommet 36422 1 Flexible Control Cable 2 Cable Tie 36422 2 Tube Clamp 1 Speed Nut 36422 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" M1-40-4.0 (1 Of 1 ) FSCM No. 36422 36422 36422 72968 TM 10-3950-263-14&P-3 M1-40-5.0 Parts List Pump Assembly W/Valve REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 19J1188 3J4485 3J4484 3J4483 3J4486 3J4485 3J5445 3A3001 3A3002 3J67**2 3A3010 3A3007 3A5782 3A2186 3J4476 3J1626 3J1625 3J4478 3J4481 3J4479 3J4482 3J4480 QTY. DESCRIPTION 1 Pump Assembly 1 Plug * 1 Spring * 1 Piston * 1 Body * 1 Plug * 1 Spring * 1 Pressure Plate 1 Bushing * "O"-Ring * 1 Cartridge Kit 2 Pin * 1 Body * 4 Screw * 1 Seat * 1 Piston * 1 Guide * 1 Guide * 1 Shim * 1 Shim * 1 Shim * 1 Shim * FSCM No. 36422 * * M1-40-5,0 (1 of 2) TM 10-3950-263-14&P-3 Parts List R284 Pump Assembly W/Valve - Continued REF. PART NO. QTY. DESCRIPTION 19 3J4477 1 Plug * 20 3J126 2 Retaining Ring * 21 1X2176 1 Ball Bearing Single Row Radial, Rings And Balls High Carbon Chromium Steel, Cage-Low Carbon Steel, Seals - Synthetic Rubber, Seals Both Sides, .7874 I.D. X 1.8504 O.D. X .5512 22 3A3003 1 Shaft * 23 3A2997 1 Key* 24 JC1373 1 Retaining Ring 25 3A2999** 1 Seal * 26 3J5442** 1 "O"-Ring * 27 3J5441** 2 "O"-Ring * 28 3A4236 1 Ring * * See Vendor Annex List For FSCM NO. ** All Items Included In 3A3008, Seal Kit M1-40-5.0 (2 Of 2) FSCM No. 91936 36422 TM 10-3950-263-14&P-3 Parts List Power Take-Off Assembly R284 M1-41-3.0 (1 Of 2 ) M1-41-3.0 TM 10-3950-263-14&P-3 Parts List R284 Power Take-Off Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 1 Pump, See Keysheet M1-40-5.0 2 3A2947 2 Capscrew * lX30 2 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" 3 18A3318 1 Power Take-off 4 3A5481 4 Screw * 5 3A4590 1 Seal * 6 3A2948 2 Ball Bearing 7 3A2964 2 Ring * 8 3A2983 1 Gear * 9 3A4591 2 Screw * 10 3A4592 1 Plate * 11 3A4585 1 Housing * 12 3A2955 2 Gasket * 13 1X2572 4 Capscrew, Hex Head, UNC Class-2A Grade 5, 5/16" X 3/4" 14 3A4586 1 Shaft * 15 3A2956 1 Cap * 16 3A2979 2 Roller Bearing 17 3A2951 2 Plug * 18 3A2981 1 Gear * 19 3A2982 1 Gear * 20 3A4587 1 Adapter * 21 3A2946 1 Ball * 22 3A2959 1 Retainer * 23 3A2962 1 Spring * 24 3A2950 1 Adjusting Screw 25 1X167 1 Finished Hexagon Nut, American Standard, Fine Thread, Carbon Steel, 3/8" 26 3A2988 1 Pin * 27 3A2989 1 Washer * 28 3A2958 2 Washer * 29 3A2953 1 Shaft * 30 3A5483 1 Shift Yoke 31 3A10050 2 Capscrew* 32 3A4589 1 Lock * 33 3A2980 1 Shaft * 34 3A2954 2 Seal * * See Vendor Annex List For FSCM No. M1-41-3.0 (2 Of 2) FSCM No. 20859 36422 * 90483 * * 90483 * Parts List Valve Stacks R284 M1-43-22.0 (1 Of 4) TM 10-3950-263-14&P-3 M-1-43-22.0 TM 10-3950-263-14&P-3 Parts List Valve Stacks - Continued REF. PART NO. QTY. 19J1200 1 1 3A5632 1 2 3A10358 2 3 20J1478 2 4 3J706 1 5 3A5061 1 6 13H781 7 28J410 1 8 3A5634 2 3A5635 1 3A10359 1 9 3A5631 4 10 3A10358 2 11 20J1478 2 12 3J706 1 13 3A5061 1 14 13H781 15 28J410 1 R284 DESCRIPTION 3/8" Valve Stack 4-Way Valve Assembly Solenoid Assembly "O"-Ring Quad Ring Coil* "O"-Ring "O"-Ring Screw * Relief Valve Seal Kit Beam Valve Assembly Solenoid Assembly "O"-Ring Quad Ring Coil* "O"-Ring "O"-Ring 36422 M1-43-22.0 (2 Of 4) FSCM No. 36422 * * 36422 * 36422 36422 * * * * 36422 * 36422 TM 10-3950-263-14&P-3 Parts List R284 Valve Stacks - Continued M1-43-22.0 (3 Of 4) M1-43-22.0 TM 10-3950-263-14&P-3 Parts List R284 Valve Stacks - Continued REF. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PART NO QTY DESCRIPTION FSCM NO. 22A2543 3A4482 3A5693 3A10357 3J706 20J1478 3A971 3A521 3A2132 3A2127 3A5694 3E124 3A4956 20J1478 3A971 3A13015 3J573 1 4 1 2 2 4 2 2 2 2 1 1 1 2 1 1 1 3/4" Valve Stack Valve Assembly Double Solenoid Assembly Coil Quad Ring "0" Ring "0" Ring "0" Ring "0" Ring "0" Ring Blocking Valve "0" Ring Coil "0" Ring "O" Ring "O" Ring "O" Ring 36422 * * * * 36422 * * * * * * * 36422 * * * *See Vendor Annex List For FSCM No. M1-43-22.0 (4 of 4) TM 10-3950-263-14&P-3 Parts List R1182 M1-44-4.0 Lock Valve Assembly REF PART NO QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 * 19J1223 18A2732* 18A3048* 18A2842 19J1166* 18A2500* 18A2505* 19J1167 28J94* 19J1224 1X1780 18A2844 JC1312* 1H174* lX4629 18A2843* 18J1378* 1 1 2 2 2 2 2 2 1 1 1 3 1 1 1 2 1 1 DESCRIPTION FSCM No. Lock Valve Assembly (4 Used Per Machine) Spring "0" Ring Valve Poppet "0" Ring Valve Seat Piston "O" Ring Valve Body Pipe Plug, Hex Socket, Alloy Steel, 3/4" Plug "O" Ring Spring Pipe Plug, Hex Socket, Alloy Steel, 1/8" Poppet Thrust Seal PX 351, Seal Kit, Contains All Items Marked With *. M1-44-4.0 1 of 1 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 12502 36422 36422 36422 12502 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R1183 Outrigger System M1-45-44.0 (1 of 4) M1-45-44.0 TM 10-3950-263-14&P-3 Parts List R1183 Outrigger Assembly - Continued REF PART NO QTY. DESCRIPTION 1 4 Lock Valve, See M1-44-4.0 2 lX5796 16 Capscrew, Hexagon Socket Head, Plastic Patch, Alloy Steel, UNF Class 2A- Grade 5, 1/2" X 3" 3 lX2771 9 Adaptor Union, Male, Straight, Steel, Zinc Plated NPTF Threads, 3/4" X 3/4" 4 22A2822 6 Hose Assembly 5 4 Jack Cylinder, See M1-46-25.0 6 18A4611 4 Hose Assembly 7 JT621 4 Hose Assembly 8 18A4609 8 Hose Assembly 9 19A2598 4 Cover 10 1X5151 28 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/8" 2-1/4" 11 1X2330 4 Pipe Nipple, Hexagon, Carbon Steel, Zinc Plated, Pipe Threads To Spec B2.2-1968, 3/4" X 1-29/32" 12 lX2838 4 Pipe Elbow, Female 90°, Carbon Steel, Zinc Plated, NPTF Thread, 3/4" 13 1X2574 8 Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" lX4 8 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 14 19A2597 4 Pin 1C165 AR Shim, 20 Ga 1X1088 8 Cotter Pin, Extended Prong, Square Cut, 1/8" X 1-1/2" 15 JR766 4 E1 bow 16 4 Beam Cylinder, See M1-45-22.0 (This Also Includes Telescoping Manifold And Hardware) 17 8A1158 4 Hose Assembly 18 1R380 8 Cable Tie 19 22A3078 1 Rear Outrigger Box 22A3077 1 Front Outrigger Box 20 JC1706 4 Pin 1A2329 8 Snap Ring 21 18A2138 4 Eye Bolt 1X185 4 Jam Nut, Finished Hexagon, Coarse Threads, Steel, Zinc Plated, 3/4" 22 18J1378 4 Thrust Seal 23 22A2773 12 Outrigger Float 22A1780 12 Hitch Pin Items 24-31 Are Used On The Left Front Outrigger Only 24 22A2833 1 Left Front Beam And Removable Jack Housing 28A2834 1 Outrigger Beam 25 22A411 1 Jack Housing 26 12C56 2 Rod End 1X3968 2 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/16" X 3/4" 27 18A2118 2 Pin 28 18A4610 2 Hose Assembly 29 18A786 2 Coupler 18A787 2 Dust Plug 18A788 2 Nipple 18A789 2 Dust Cap 30 1X2330 2 Pipe Nipple, Hexagon, Carbon Steel, Zinc Plated, Pipe Threads to ANSI Spec. B2.2-1968, 3/4" X 1-29/32" M1-45-44.O (2 of 4) FSCM NO. 72968 09505 36422 36422 36422 36422 36422 72968 09505 09505 90483 86157 36422 36422 20859 36422 36422 36422 36422 36422 36422 36422 36422 90483 36422 36422 36422 36422 36422 36422 36422 72968 36422 36422 36422 36422 36422 36422 09505 TM 10-3950-263-14&P-3 Parts List R1183 M1-45-44.0 Outrigger Assembly - Continued Function Jack Extend Jack Retract Circuit A B Beam Extend Beam Retract C D Function Jack Extend Jack Retract Circuit A B Part No. 18A786 18A788 Left Front Jack (7) (6) Left Front Beam (15) (14) Quick Disconnect Desc. Coupler Nipple Hose Connection Chart* Rt. Front Jack (11) (10) Rt. Front Beam (19) (18) FSCFM NO 36422 36422 Dust Caps And Plugs Part No . Desc. 18A787 Dust Plug 18A789 Dust Cap Beam Extend 31A242 Coupler 36422 18A2063 A Beam Retract 18A2061 Nipple 36422 18A2064 A Note: Refer to 1-38 Outringer Hyd Lines in Keysheet, For Continuation Of Function Chart MI-45-44.0 (3 Of 4) Left Rear Jack (9) (8) Left Rear Beam (13) (12) Dust Plug Dust Cap Rt. Rear Jack (5) (4) Rt. Rear Beam (17) (16) FSCFM NO. 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R1183 Outrigger Assembly - Continued REF PART NO. QTY 31 1X2771 1 32 33 34 35 18A4611 22A285 16D28 18A470 1 8 16 8 DESCRIPTION FSCM NO. Adaptor Union, Male, Straight Steel, Zinc Plated, NPTF Threads, 3/4" X 3/4" Hose Assembly Outrigger Pin Hitch Pin Clip Pin M1-45-44.0 (4 of 4) 09505 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R683 M1-45-48.0 Beam Cylinder Assembly ‘ NA386-C M1-45-48.0 (1 of 2) TM 10-3950-263-14&P-3 Parts List R683 Beam Cylinder Assembly REF. PART NO. QTY 22A2830 1 1 18A692 1 lX178 1 2 1X2597 2 3 lX2690 2 4 lX2689 2 5 6 18A694 lX4020 2 2 7 8 1X1944 lX20 1 AR 9 10 18A684 1X2832 1 2 11 1X70 2 12 13 22A384 lX200 1 1 14 15 16 17 18 19 20 21 22 23 24 3J3402 3A4577* 3A45718 3A10035* 3A4582 3J5026* 3A10021* 3A10023* 3A10029* 3A10048 3A4581 1 2 2 1 1 1 1 1 1 1 1 DESCRIPTION Beam Cylinder (4 Required Per Machine) Anchor Block Rollpin, Carbon Steel, Natural, 1/4" x 2" Male Connector, 370 Flare, Steel, 3/4" x 3/4" Tube Net, 370 Flare, Steel, Zinc Plated, 3/4" Tube Sleeve, 370 Flare, Steel, Zinc Plated, 3/4" Telescoping Tube-Inner Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" x 2-1/2" Street Elbow, 900, Steel, 1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Telescoping Sleeve Manifold Oil Seal, Palmetto D-W Oil Seal W/Single D-Ring Seal And Wedge Ring Retaining Device, Sealing Ring - Synthetic Rubber, Wedge Rings - Nylon, 3/4" Retaining Ring, Internal, Carbon Spring Steel, 1-1/4" Cylinder Assembly Hexagon Jam Nut, UNF-2B, Steel, Zinc Plated, 7/8" Piston Back-up Ring O-Ring O-Ring Piston Rod Retaining Ring Rod Wiper Back-up Ring O-Ring Rod Guide Stop Guide * Included in Cylinder Seal Kit, 3A4584 ** See Vendor Annex List For FSCM No. M1-45-48.0 (2 of 2) FSCM No 36422 36422 09505 09505 09505 09505 36422 72968 09505 86157 36422 02697 79136 36422 90483 ** ** ** ** ** ** ** ** ** ** ** TM 10-3950-263-14&P-3 Parts List M1-45-51.0 Multiple Float Assembly NA389-A REF. 1 2 3 4 5 6 PART NO. 22A1780 1X4942 QTY. 4 4 8 8 22A3043 22A1780 22A2773 4 12 12 DESCRIPTION Jack Cylinder (See M1-46-25.0) Outrigger Assembly (See M1-45-44.0 Hitch Pin Retaining Ring, External High Carbon Spring Steel, 7/8" Shaft Dia. Multiple Float Bracket Hitch Pin Outrigger Float M1-45-51.0 (1 Of 1) FSCM NO. 36422 79136 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R782 M1-46-25.0 Jack Cylinder REF 1 2 3 4 PART NO 22A3134 1X4228 22A3185 1X5216 QTY 5 6 7 8 9 10 11 12 13 14 15 22A2588 AC3537 1C38 22A166 22A167 22A2564 22A456 22A457 22A458 22A165 1X3556 1 1 1 2 3 1 1 1 1 1 1 1 1 1 DESCRIPTION 1 Jack Cylinder Assembly, 4 Required Per Machine Pipe Plug, Square Head, Steel, 3/4" Body Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 1-1/4" X 5" Piston "O" Ring * Roll Pin "0" Ring * Back-Up Washer * Rod Gland Back-Up Washer * "O" Ring * Wiper Ring * Retaining Ring, Internal, Carbon Spring Steel, 9-1/4" Housing Diameter * Items Included In 3X254, Seal Kit M1-46-25.0 (1 Of 1 ) FSCM No. 36422 09505 36422 72968 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 79136 36422 TM 10-3950-263-14&P-3 Parts List M1-46-30.0 Check Valve REF. 1 2 3 4 5 PART NO 18J1459 3J4254 3J4252 3J3598 3J4253 QTY. 1 2 1 2 1 DESCRIPTION Check Valve "0" Ring Check Valve, W/Thermal Relief Seal Kit Check Valve *See Vendor Annex List For FSCM No. M1-46-30.0 (1 of 1) FSCM No. 36427 * * * * TM 10-3950-263-14&P-3 Parts List M1-46-31.0 Jack Cylinder REF. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO 36J3151 36J3150 1X6011 QTY. 1 1 1 36J3148 12A2074 lX2083 28J78 36J517 12A2690 12A2691 12A2693 DC220 36J2464 36J12 1 1 1 2 3 1 1 1 1 1 1 DESCRIPTION Cylinder Assembly Body Capscrew, Hex Head, UNC-Class 2A, Grade 5, 1-1/4" X 3-1/4" Piston "O" Ring * Rollpin, Carbon Steel, Natural, 1/4" X 1" "0" Ring * Back-Up Ring* "O" Rinq * Back-Up Ring * Wiper * Snap Ring * Gland Rod * Items Are Included In 3X83 Seal Kit M1-46-31.0 (1 Of 1 ) FSCM No. 36422 36422 90483 36422 36422 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R983 Creeper Transmission M1-61-7.0 (1 Of 4) M1-61-7.0 TM 10-3950-263-14&P-3 Parts List R983 Creeper Transmission - Continued REF PART NO OTY DESCRIPTION 28A1900 1 Transmission Assembly Yoke And Bar Assembly 1 3A5594 1 Shift Yoke 2 3A857 1 Gasket 3 3A5595 1 Shift Bar Housing 4 1X530 4 Capscrew, Hex Head, UNC Class 2A Grade 5, Zinc Plated 3/8" X 1-1/4" 5 3A5596 1 Plug 6 3A786 1 Spring AC421 1 Steel Ball 7 3A5593 1 Spacer 8 3A742 1 Lockscrew 9 3A5592 1 Yoke Bar 10 lX168 1 Nut, Finished Hexagon, American Standard, Fine Thread, Carbon Steel, 7/16" 11 3A1563 1 Eye Rod End Countershaft Assembly 12 3A5616 2 Bearing 13 3A5617 2 Countershaft Assembly 14 3A682 2 Bearing 15 3A5618 2 Snap Ring Drive Gear Assembly 16 3A891 1 Nut 17 3A5574 1 Washer 18 3A8671 1 Oil Seal 19 3A5598 1 Snap Ring 20 3A5599 1 Bearing 21 3A5600 1 Bearing Housing 22 3A5608 1 Plug 23 3A5609 1 Gasket 24 3A5607 1 Snap Ring 25 3A5606 1 Drive Gear 26 3A5605 1 Snap Ring 27 3A5604 1 Bearing 28 3A5603 1 Capscrew 29 3A5602 1 Main Shaft 30 3A5601 1 Input Shaft Rear Housing Assembly 31 3A5589 1 Rear Housing 3A731 1 Gasket 32 3A757 1 Breather 33 1X824 1 Pipe Plug, Hex Socket, Heat Treated Alloy Steel 1/4" 34 3A852 1 Gasket 35 3A1566 1 Plug 3A849 1 Bushing 36 3A5570 1 Rear Bushing Cover 37 1X3823 5 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3" 1X28 5 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" 38 3A5572 1 Sleeve (Speedo Replacement) 39 3A850 1 Oil Seal M1-61-7.0 (2 Of 4) FSCM NO. 36422 * * * 90483 * * * * * * * 90483 * * * * * * * * * * * * * * * * * * * * * * * 09505 * * * * 90483 20859 * * TM 10-3950-263-14&P-3 Parts List R983 M 1-61-7.0 Creeper Transmission - Continued REF 40 PART NO lX4018 OTY 1 3A5573 3A5567 1X531 1 1 8 44 3A5591 3A5590 lX531 1 1 16 1 X3823 1 1 X1584 1 1 X28 3 45 3A874 1X31 4 4 lX171 4 41 42 43 DESCRIPTION Locking Capscrew, Hex Head, UNC Class 2A Grade 5, 3/8" X 3" Gasket Bearing Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/2" Rear Bearing Cover Gasket Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/2" Capscrew, Hex Head UNC, Class 2A - Grade 5, 3/8" X 3" Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 2" Spring Lockwasher, Medium Series Carbon Steel, Natural, 3/8" Main Housing Assembly Stud Spring Lockwasher, Medium Series, Carbon Steel, Natural, 5/8" Nut, Finished Hexagon, American Standard, Fine Thread, Carbon Steel, 5/8" M1-61-7.0 (3 Of 4) D52-B,D53-B,KA257-A FSCM NO. 72968 * * 90483 * * 90483 90483 90483 20859 * 20859 90483 TM 10-3950-263-14&P-3 Parts List Creeper Transmission - Continued REF 46 47 48 49 50 51 52 PART NO 3A8635 3A5584 1X830 3A761 3A762 3A544 1X528 OTY 1 1 1 1 1 1 6 3A5586 lX30 6 6 1X169 6 lX529 3A2765 3A2766 3A5587 3A5588 1X832 1X829 3A7485 3A6863 60 lX536 8 2 2 1 1 1 1 1 1 8 61 3A5241 3A5242 1 1 62 63 64 65 66 67 68 69 70 71 72 3A891 3A5574 3A5615 3A5614 3A5613 3A5610 3A5611 3A5612 1X3827 18A3182 19A2288 19A2289 22A1293 28A499 lX4513 1 1 1 1 1 1 1 1 4 8 1 1 4 4 4 76 1X3357 1X3809 4 4 77 78 19A2286 1X3870 1 4 53 54 55 56 57 58 59 73 74 75 R983 DESCRIPTION Dowel Pin Main Housing Pipe Plug, Square Head, Steel, 3/4" Magnet Cover (P.T.O.) Gasket Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" x 3/4" Stud Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" Nut, Finished, Hexagon, American Standard, Fine Thread, Carbon Steel, 1/2" Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Cover Gasket Seal Oil Seal Pipe Plug, Square Head, Steel, 1-1/4" Pipe Plug, Square Head, Steel, 1/2" Plug Gasket Capscrew, Hex Head, UNC Class 2A - Grade 5, 7/16" X 1" Cover (P.T.O.) Gasket Mainshaft Assembly Nut Washer Spacer Snap Ring Bearing Sliding Clutch Mainshaft Gear (Reduction) Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/4" X 5" Rubber Pad Transmission Mount (Left Side) Transmission Mount (Right Side) Spacer Washer Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/4" Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Transmission Mount (Front) Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/8" M1-61-7.0 (4 Of 4) FSCM NO. * * 09505 * * * 90483 20859 90483 90483 * * * * 09505 09505 * * 90483 * * * * * * * * * * 90483 36422 36422 36422 36422 36422 72968 90483 72968 36422 72968 TM 10-3950-263-14&P-3 Parts List R983 GM6V-92TA Engine Assembly M1-63-62.0 (1 of 3) M1-63-62.0 TM 10-3950-263-14&P-3 Parts List GM6V-92TA Engine Assembly - Continued REF. 1 2 PART NO 22A3092 82201300 4 OTY 1 2 1X5056 2 AC1044 lX891 1 1 3 18A2822 28H249 1X935 45J279 18A4308 18A2217 22A2199 22A2200 22A2201 1X6 1X183 2 1 1 1 2 4 4 8 2 8 8 1X3808 8 1X2746 HC28 18A444 1X6 lX3808 4 2 2 2 2 10 11 22A3102 lX5327 1 2 12 13 14 18A4309 28A471 lX3918 X 1-1/2" 22A72 HC2417 18A2610 1S221 18A4264 18A2613 18A2867 1X2846 1X3870 1 1 12 1X7 18A2625 lX3771 lX4513 4 AR 2 2 4 5 6 7 8 9 15 16 17 18 19 20 21 22 23 1 2 2 2 2 2 2 2 2 R983 DESCRIPTION Radiator Hose, Oil Resistant Rubber, Single Ply Synthetic Yarn Reinforcement, 3/8" I.D. Clamp, Hose, Flat Band, Stainless Steel Band, Retainer And Bracket; T-Bolt Alloy Steel Heat Treated, Zinc Plated, 25/32" Mix Hose Fitting Pipe Reducer Bushing, Hex Head, Steel, 3/8" X 1/4" 82201301210’ Hose, Oil Resistant Rubber, 2 Ply Synthetic Yarn Reinforcement, 1" I.D. Adjustable Hose Clamp Pipe Street Elbow, 450, Malleable Iron, Black, 3/4" Temperature Sending Unit Radiator Hose Adjustable Hose Clamp Clip Rubber Spacer Rod Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Jam Nut, Finished Hexagon, Coarse Thread, Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 1" Rubber Pad Pad Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Radiator Bracket Clamp, Hose, Flat Band, Stainless Steel Band, Retainer And Bracket; T-Bolt, Alloy Steel Heat Treated, Zinc Plated, 3-3/4" Max. Radiator Hose Oil Pressure Sending Unit Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" Angle Engine Mounting Pad Spacer Washer Spacer Spacer Engine Mounting Pad Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/8" X 2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/8" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 5/8" Shim, 16 Ga. Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/4" X 3-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/4" M1-63-62.0 (2 Of 3) FSCM NO. 36422 24161 54646 36422 09505 24161 36422 36422 09505 36422 36422 36422 36422 36422 36422 86157 90483 72968 90483 36422 36422 86157 72968 36422 54646 36422 36422 72968 36422 36422 36422 36422 36422 36422 36422 90483 72968 86157 36422 90483 72968 TM 10-3950-263-14&P-3 Parts List R983 M 1-63-62.0 GM6V-92TA Engine Assembly - Continued REF 24 25 26 27 28 29 30 PART NO. 18A4249 18A4588 1X3896 OTY 1 1 8 18A3182 41H87 HC2418 HC2419 1X3718 1X3808 4 2 2 4 4 4 31 32 1X6 18A4450 1X3803 1X3870 8 1 2 2 33 34 18A4270 28A498 4 2 DESCRIPTION Right Hand Engine Mount Left Hand Engine Mount Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/8" X 1-1/2" Rubber Pad Spacer Sheet, 10 Ga. Rubber Pad Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 1-3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Front Engine Mount Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/8" X 4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/8" Spacer Spacer M1-63-62.0 (3 Of 3) FSCM NO. 36422 36422 72968 36422 36422 36422 36422 90483 72968 86157 36422 90483 72968 36422 36422 TM 10-3950-263-14&P-3 PARTS LIST M1-63-62.1 Cylinder Block And Air Box Drains REF. PART NO. QTY. DESCRIPTION 1 5149243 1 5146497 5138659 5106174 5148376 5139988 5146646 5132410 5144559 5139989 5102824 4 2 1 10 2 1 2 1 7 8 5106174 5146913 5150362 8920631 141346 5103045 1 2 2 10 4 3 FSCM No. Block Assembly, 6V-92 Cylinder Following Items Are Assemblied To The Block Cap, Main Bearing - See Note Gasket, 2-1/2" -16 Plug - See Note Adaptor (Inlet Cooler) - See Note Plug, 11/16" Hex. Socket Head (Primed) - See Note Plug, 1" Cup (Stainless Steel) - See Note Plug, 1-1/4" Square Socket Head Pipe - See Note Plug, 1-5/8" Cup (Stainless Steel) - See Note Plug, 2-1/4" Cup (Stainless Steel) - See Note Plug, 2-1/2" Cup (Stainless Steel) - See Note Bolt, 11/16" -11 X 6-3/4" (Main Bearing Cap) - See Note 26095 Following Items Are Shipped Loose With The Block Adaptor (Inlet Cooler) - See Note Bushing, Reducing - See Note Stud, 3/8" -16 X 1-5/8" - See Note Bolt, 5/16" -18 X 1" - See Note Pin, 3/16" X 1/2" Dowel - See Note Pin, 5/16" X 7/16" Dowel - See Note M1-63-62.1(1 of 3) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Live Mast Lines - Continued REF. PART NO. QTY. DESCRIPTION 5151576 4 Pin, 1/2" X 1-3/8" Dowel - See Note 5145009 1 Plug, 1/8" Hex. Socket Head Pipe - See Note 5121182 7 Plug, 1/4" Pipe - See Note 5145014 4 Plug, 3/8" Hex. Socket Head Pipe - See Note 5115214 3 Plug, 1/2" Pipe - See Note 5111798 3 Plug, 1" Square Head Pipe - See Note 9428477 1 Plug, 15/16" Cup - See Note 5142549 4 Plug, 3/4" -14 Socket Head - See Note 5139988 1 Plug, 1" Cup (Stainless) - See Note 5123862 2 Plug, 1-3/8" Cup (Special) - See Note 103647 2 Draincock, 1/4" - See Note 118536 1 Draincock, 3/8" - See Note 5145009 1 Plug, 1/8" Hex. Socket Pipe - See Note 5125237 1 Plug, 1/4" Socket Teflon Pipe - See Note 5145014 1 Plug, 3/8" Hex. Socket Pipe - See Note 2 5117733 1 Cover (Plain), Cylinder Block Water Hole 5117734 1 Gasket, Cylinder Block Water Hole Cover 179838 4 Bolt, 3/8" -16 X 7/8" 103341 4 Washer, 3/8" 3 5106688 2 Gasket, Cylinder Block Small Hand Hole Cover 5106689 2 Gasket, Cylinder Block Large Hand Hole Cover 4 5132458 2 Cover, Cylinder Block Small Hand Hole 5144186 2 Cover, Cylinder Block Large Hand Hole 5145009 2 Plug, 1/8" 26095 5 8920631 10 Bolt, 5/16" -18 X 1" 6 5102841 1 Plate Assembly, Cylinder Block End - Rear 5121459 11 Nut, 3/8" -24 Plug 5132422 1 Plate Assembly, Cylinder Block End - Front 5121459 1 Nut, 3/8" -24 Plug 7 103321 4 Lockwasher, 3/8" To Rear End Plate 103325 1 Lockwasher, 5/8" 26095 103321 5 Lockwasher, 3/8" To Front End Plate 103323 2 Lockwasher, 1/2" 26095 8 179839 4 Bolt, 3/8" -16 X 1" To Rear End Plate 428204 1 Bolt, 5/8" -11 X 1" 26095 179839 5 Bolt, 3/8" 16 X 1" To Front End Plate 122408 2 Bolt, 1/2" -13 X 1" 26095 9 5144874 1 Gasket, Cylinder Block End Plate (Rear) 5144901 1 Gasket, Cylinder Block End Plate (Front) 5121835 1 Gasket, (Corner Of Block), Cylinder Block End Plate (Front) 26095 5144874 1 Gasket, Cylinder Block End Plate (Front) 5199616 AR Gasket Kit, Engine Overhaul - Consists Of Necessary Gaskets For One Complete Engine Overhaul. 5104386 5104371 444148 5121182 444287 1 1 2 2 2 Following Items Make Up The Air Box Drains (One Each Side) Tube, Air Box Drain Tube, Air Box Drain Tee, 1/4" -18 Pipe Plug, 1/4" Pipe Nipple, 1/4" -18 Pipe M1-63-62.1(2 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Cylinder Block And Air Box Drains - Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 105404 112877 8996207 5104370 5151883 5151921 103341 2 2 2 2 1 4 1 Nipple, Pipe Reduction 1/8" X 3/-" Bushing, Reduction 1/4" 1/8" Check Valve Assembly Adaptor 26095 Clip, Air Box Drain Tube 3/8" Washer 26095 Washer, 3/8" 26095 26095 26095 5149519 AR Kit, Air Box Drain w/Check Valve - Consist Of Necessary Parts To The Drain Into The Crankcase. 26095 Note: Refer To Block Plugging Chart Located In The Service Manual. M1-63-62.1(3 of 3) 26095 26095 TM 10-3950-263-14&P-3 Parts List Cylinder Head M1-63-62.2 M1-63-62.2(1 of 2) TM 10-3950-263-14&P-3 Parts List Cylinder Head - Continued REF. PART NO. QTY. DESCRIPTION 1 5199664 2 2 3 4 5 6 7 8 9 5142549 5193541 5199527 5160037 5117344 5129919 5148615 5172874 5148507 5148490 2 1 3 3 3 12 2 2 4 12 5121182 5125237 5154453 5145014 5178976 5150132 5117186 5112899 5101377 5150361 5106269 5103537 5100703 5119972 5100404 5148502 180016 5179709 5150268 5123812 5199673 12 6 6 6 7 4 6 3 4 2 1 4 6 3 10 16 4 2 6 26 12 12 6 6 AR 10 11 12 13 14 15 16 17 18 19 20 21 Head Assembly, (6V) Cylinder Following Items Assemblied To Cylinder Head Assembly Plug, 3/4" Plug, Fuse Tube Kit, Injector Hole Ring, Injector Hole Tube Seal Plate, Water Outlet Port Guide, Exhaust Valve Sleeve, Pilot Nozzle, Water (Single Outlet) Nozzle, Water (Double Outlet) Insert, Exhaust Valve Following Items Shipped Loose With Cylinder Head Assembly Washer, - See Ml-63-62.11 Washer, - See M1-63.62.13 Connector, Fuel Manifold - See M1-63-62.13 Guide, Exhaust Valve Bridge - See M1-63-62.11 Plug, 1/4" Hex. Socket Head Plug, 1/4" Hex. Socket Head Plug, 3/8" -16 Headless Plug, 3/8" Hex. Socket Head Plug, 7/16" -14 Special Plug, 3/4" Diameter Cup Plug, 2" Diameter Cup Stainless Stud, 7/16" -14 X 2-3/32" Bolt, 3/8" -16 X 1" Hex. w/Seal Patch Gasket, Water Outlet Port Plug, 1/4" -18 Hex. Socket Bolt, 11/16" -11 X 5.40" Cylinder Head Shim, Support Ring, Seal (Head To Block) Gasket, Cylinder Head Compression Ring, Seal Bolt, 1/4" -20 X 1/2" Washer, 1/4" Copper Cover, Governor Hole Gasket, Governor Hole Cover Gasket Kit, (6V) Cylinder Head Overhaul M1-63-62.2(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.3 Parts List Engine Lifter Brackets REF. PART NO. 1 2 5109900 190270 223435 103323 103325 5117174 454933 103322 5117332 QTY. DESCRIPTION 1 1 1 1 1 2 4 4 2 Bracket, Engine Lifter Front Bolt, 1/2" -13 X 4-1/4" Bolt, 5/8" -11 X 1-3/4" Lockwasher, 1/2" Lockwasher, 5/8’ Bracket, Engine Lifter Rear Bolt, 7/16" -14 X 1-1/8" Lockwasher, 7/16" Gasket, Engine Lifter Bracket M1-63-62.3(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.4 Parts List Crankshaft M1-63-62.4(1 of 2) TM 10-3950-263-14&P-3 Parts List Crankshaft - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 9409620 5125608 5100641 5100640 5100436 5145300 120502 5145009 5177528 5117005 5117102 5106329 9409035 141346 5146497 5102824 5149565 1 1 5 5 1 2 1 1 1 3 2 4 1 1 6 4 4 8 4 Seal, Crankshaft Oil (Single Lip) Front - See M1-63-62.21 Oil Pump Body Assembly (Front Cover) - See M1-63-62.21 Bolt, 7/16" -14 X 1-1/8" Lock Washer, 15/32" X 3/4" X 1/8" Stablizer, Crankshaft Main Bearing Cap Stablizer, Crankshaft Main Bearing Cap Stablizer, Crankshaft Main Bearing Cap Crankshaft Assembly Key, 3/16" X 7/8" Woodruff Oil Pump Drive Plug, 1/8" Pipe Dowel, 9/16" X 1-5/8" Washer (Standard), Crankshaft Main Bearing Thrust Gear (Right Helix), Crankshaft Timing Seal, Crankshaft Oil (Double Lip) Rear Bolt, 3/8" -24 X 1-1/2" Lock Pin, 3/16" X 1/2" Dowel Cap (Unfinished), Crankshaft Main Bearing Bolt, 11/16" -11 X 6-3/4" Crankshaft Main Bearing Cap Shell Set (Standard), Crankshaft Main Bearing M1-63-62.4(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.5 Parts List Crankshaft Pulley REF. PART NO. 5133762 5122237 5131724 5157930 5153623 QTY. DESCRIPTION 1 1 2 1 1 Belt Set (3 Belts), Crankshaft Pulley Drive Pulley (6.34" Dia., 3 Groove), Crankshaft Key, 3/8" X 1-1/4" Woodruff Retainer, Crankshaft Pulley Bolt, 1 -14 X 2-1/4" M1-63-62.5(1 of 1) FSCM No. 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.6 Parts List Flywheel And Flywheel Housing REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 5121466 103321 5104507 5152148 5138619 103321 186315 117049 186317 5101548 5122219 103341 103321 5106559 5131755 186622 179838 179835 271570 103325 4 4 3 AR AR AR AR AR AR AR 2 3 3 3 1 1 AR AR 2 2 Bracket, Flywheel Housing To Head Support - See M1 -63-62.3 Bolt, 3/8" -24 X 3-7/8" Lockwasher, 3/8" Gasket, Flywheel Housing Small Hole Cover Washer, 3/8" X 9/16" Copper Washer, 25/64" X 3/4" X .083" Plain Lockwasher, 3/8" Bolt, 3/8" -24 Y4-1/2" Nut, 3/8" -24 Hex. Bolt, 3/8" -24 X 5" Stud, 3/8" -16 -24 X 1.18" Cover, Flywheel Housing Small Hole Washer, 3/8" Lockwasher, 3/8" Bolt, 3/8" -16 X 1" (W/Seal Patch) Washer, 17/32" X .88" Hardend Bolt, 3/8" -16 X 1-1/4" Bolt, 3/8" -16 X 7/8" Bolt, 3/8"--16 X 5/8" Bolt, 5/8" -11 X 4" Lockwasher, 5/8" M1-63-62.6 (1 Of 2 ) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Flywheel and Flywheel Housing - Continued REF. PART NO. QTY. DESCRIPTION 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 5137275 179839 5138619 5131978 190770 907594 5100532 9411631 5106225 5188030 5142549 5104497 5144875 179857 5125108 5122281 100158 103343 103323 5104506 2 8 6 6 6 1 1 6 1 1 1 1 1 1 AR AR 1 AR AR AR 1 Washer, .68" Bolt, 3/8" -16 X 1" Washer, 25/64" Washer, .53" X 1" Bolt, 1/2" -13 X 3-1/4" Bearing, Clutch Pilot Plate, Scuff Bolt, 9/16" -18 X 2-3/4" Flywheel Assembly Gear (102 Teeth), Flywheel Ring Seal, Crankshaft Oil - Rear - See M1-63-62.4 Plug, 3/4" Pipe Housing, Flywheel Gasket, Flywheel Housing Bolt, 7/16" -14 X 7/8" Washer, 7/16" Cover, Flywheel Housing Large Hole Bolt, 1/2H -13 X 1" Washer, 17/32" Lockwasher, 1/2" Gasket, Flywheel Housing Large Hole Cover M1-63-62.6 (2 Of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.7 Parts List Connecting Rod And Piston REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 5117629 5104501 5132383 5149240* 5180250* 5102720* 5144843* 5140000* 5144872* 5144620*# 5100607*# 5100601*# 5101143 5107176* 5148501 5101166* 5149242*# 5144846 5148373 5149572 QTY. DESCRIPTION 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1 Quantities Shown Are For One Cylinder Nut, 7/16" -20 Rod Assembly (Crosshead), Connecting Bolt, 7/16" -20 X 3.52" Piston Assembly (17:1 Turbo) Retainer, Piston Pin Skirt, Piston Bearing, Piston Kit Ring, Crosshead Piston Seal Crown, Piston (17:1 Turbo) Ring, Piston Compression (Bottom) Ring, Piston Compression (Top) Ring, Piston Compression (Fire) Pin, Piston Liner, Cylinder Insert (Standard), Cylinder Liner Seal, Cylinder Liner Ring Set (Turbo), Piston Oil Control - See Note Spacer Bolt, 7/16" -20 (12 Point) Shell Set (Standard), Connecting Rod Bearing M1-63-62.7(1 of 2) FSCM No. 26095 26095 26095 26095 26905 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Connecting Rod And Piston - Continued REF. PART NO. QTY. DESCRIPTION * # 5149598 5149241 AR 1 Cylinder Kit Ring Set, Piston - Consist Of Sufficient Rings For One Piston Note: Consist Of Scraper And Expanders For One Piston M1-63-62.7(2 of 2) FSCM No. 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.8 Parts List Camshaft And Gear Train M1-63-62.8(1 of 3) TM 10-3950-263-14&P-3 Parts List Camshaft And Gear Train - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 5150087 5177769 5126904 5147286 949035 127559 5106958 5151277 5144594 5144672 5172734 103321 186627 186622 103321 5111422 5111423 5106959 5151277 5196026 5117243 5117984 5111423 5116476 5116485 5148002 9414268 5117649 5115572 5111424 5199384 5103534 5176998 5130135 5151444 7451948 5113817 5167714 454992 5101150 5167714 454992 5123081 5122915 5122937 5117727 5117704 5122918 5120501 5148810 5138836 274889 5152148 4 2 1 1 2 2 1 2 1 1 2 8 8 6 12 2 2 1 2 4 1 2 2 1 2 1 6 4 8 4 1 6 1 1 1 1 1 1 1 1 1 1 1 2 6 1 1 1 2 1 1 1 1 Nut, 1-1/8" -18 Lockwasher, 1-1/8" Gear, Water Pump Drive Weight, Front Balancer Pump Drive Bolt, 3/8" -24 X 1" Key, 1/4" X 3/4" Camshaft Assembly (Right Bank, Stamped 5106954) Plug, Drive Gear (Right Helix, Right Bank), Camshaft Gear (Left Helix, Left Bank), Camshaft Retainer, Camshaft Gear Nut Lockwasher, 3/8" Bolt, 3/8" -24 X 1" Bolt, 3/8" -16 X 1-1/4" Lockwasher, 3/8" Bearing, Camshaft Rear End Bushing, Camshaft End Camshaft Assembly (Left Bank; Stamped 5106955) Plug, Drive Bearing Set, Camshaft Intermediate Gasket, Camshaft Front End Bearing Bearing, Camshaft Front End Bushing, Camshaft End Seal, Camshaft Oil (Front, Left Bank) Spacer (.64"), Camshaft Gear Pulley, Front Balancer Bolt, 3/8" -16 X 1-1/2" Bolt, 3/8" -24 X /62" Ring, Camshaft Intermediate Bearing Washer, Camshaft End Bearing Thrust Gear Assembly (Left Helix), Idler Bolt, 5/16" -24 X 1/2" (Vibra-Tite) Retainer, Idler Gear Bearinq Hub Assembly, Idler Gear Dowel Bearinq, Idler Gear Gear (Left Helix), Idler Washer, 1/2" Bolt, 1/2" -13 X 2-1/2" Spacer Assembly, Idler Gear Hole Washer, 1/2" Bolt, 1/2" -13 X 2-1/2" Hub, Blower Drive Gear Plate, Blower Drive Gear Hub Spring Bolt, 3/8" -24 X 15/16" Nut, 1-7/16" -16 Washer, Blower Drive Gear Thrust Gear Assembly (Left Helix 38 Teeth), Blower Drive Bushing, Blower Drive Gear Gasket, Blower Drive Support Support Assembly, Blower Drive Pin, 1/8" X 1/4" Spring Washer, 3/8" Copper M1-63-62.8(2 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.8 Parts List Camshaft And Gear - Continued REF. PART NO. QTY. DESCRIPTION 47 48 49 50 181361 181365 5117700 5117720 103321 1 1 2 1 6 Bolt, 3/8" -24 X 7/8" Bolt, 3/8" -24 X 1-1/8" Bearing Lockwasher Lockwasher, 3/8" M1-63-62.8(3 of 3) FSCM No. 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.9 Parts List Balance Weight Cover REF. PART NO. 1 2 3 4 5 6 7 8 5141661 141236 9419648 5122680 512123 179848 181370 181371 179888 271564 117049 103341 103343 103345 103321 103323 5123638 QTY. DESCRIPTION 1 3 2 1 1 2 1 4 1 2 4 8 1 2 8 1 1 Cover Assembly, Balance Weight Pin, 3/8" X 1/2" Dowel Screw, 5/16" -18 X 3/4" Self Tap., Hex. Head Cover, Accessory Drive Hole Gasket, Accessory Drive Hole Cover Bolt, 3/8" -16 X 2-1/4" Bolt,’ 3/8" -24 X 1-3/8" Bolt, 3/8" -24 X 1-3/8" Bolt, 1/2" -13 X 1-7/8" Bolt, 5/8" -11 X 2-1/2" Nut, 3/8" -24 Hex. Washer, 3/8" Flat Washer, 1/2" Flat Washer, 5/8" Flat Lockwasher, 3/8" Lockwasher, 1/2" Gasket, Balance Weight Cover M1-63-62.9(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.10 Parts List Accessory Drive REF. PART NO. 1 2 3 4 5145092 QTY. DESCRIPTION 1 1 1 4 Gasket, Air Compressor - See M1-63-62.36 Coupling, Accessory Drive - See M1-63-62.36 Plate, Accessory Drive - See M1-63-62.36 Bolt, 3/8" -24 X 1.20" Self Lock M1-63-62.10(1 of 1) FSCM No. 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.11 Parts List Valve Operating Mechanism M1-63-62.11(1 of 2) TM 10-3950-263-14&P-3 Parts List Valve Operating Mechanism - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 4 5 6 7 8 10 4 5 6 7 8 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 5150325 5103903 5148472 5150311 5122445 5123700 5150314 5150312 5146871 5150311 5150318 5123700 5150314 5150312 5148475 5150311 5122445 5123700 5150314 5150312 5150322 5151272 5151601 5150303 5108919 5108918 5123250 5128640 5106642 5195220 5106413 103319 443603 5149041 5111337 5117564 5148491 5129101 5151601 5117563 5147347 5117562 5129919 5148490 12 12 6 1 1 1 1 1 6 1 1 1 1 1 6 1 1 1 1 1 6 6 18 18 18 18 18 18 18 18 6 12 12 24 48 12 12 12 12 24 24 24 24 24 Bolt 26095 Bracket, Rocker Shaft Arm Assembly, Exhaust Valve Rocker (Left) Bushing, Exhaust Valve Rocker Arm Small Bushing, Exhaust Valve Rocker Arm Large Bushing, Exhaust Valve Rocker Arm Clevis Pin, Exhaust Valve Rocker Arm Clevis Clevis, Exhaust Valve Rocker Arm Arm Assembly, Injector Rocker Bushing, Injector Valve Rocker Arm Small Bushing, Injector Valve Rocker Arm Large Bushing, Injector Valve Rocker Arm Clevis Pin, Injector Valve Rocker Arm Clevis Clevis, Injector Valve Rocker Arm Arm Assembly, Exhaust Valve Rocker (Right) Bushing, Exhaust Valve Rocker Arm Small Bushing, Exhaust Valve Rocker Arm Large Bushing, Exhaust Valve Rocker Arm Clevis Pin, Exhaust Valve Rocker Arm Clevis Clevis, Exhaust Valve Rocker Arm Shaft Assembly, Rocker Plug Nut, 5/16" -24 Retainer, Push Rod Seat, Push Rod Spring (Upper) Spring, Push Rod Seat, Push Rod Spring (Lower) Rod, Push Follower Assembly, Cam Roller Set, Cam Follower - See Note Guide, Cam Follower Lockwasher, 1/4" Bolt, 1/4" -20 X 3/4" Valve, Exhaust (Includes Locks) Lock (Halves), Exhaust Valve Spring Guide, Exhaust Valve Bridge Bridge, Exhaust Valve Screw, 5/16" -24 X 1" Adjusting Nut, 5/16" -24 Cap, Exhaust Valve Spring Spring, Exhaust Valve Seat, Exhaust Valve Spring Guide, Exhaust Valve Insert, Exhaust Valve Note: Includes Roller w/Bushing And Pin M1-63-62.11(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.12 Parts List Rocker Cover M1-63-62.12 (1 Of 3) TM 10-3950-263-14&P-3 Parts List Rocker Cover - Continued REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 5125995 5113825 5146248 5106031 5106065 5103694 5103695 5104018 5103636 5101760 5103647 5103642 5104515 5104514 5104015 5103648 5103646 145382 5106857 5104585 5104592 QTY. DESCRIPTION 1 1 1 1 1 1 1 2 2 2 2 9 4 4 4 2 2 4 2 1 2 Cap, Oil Filler Tube Chain, Oil Filter Hook, Chain Strainer, Oil Filler Tube, Oil Filler Cover, Rocker (Left) Cover, Rocker (Right) Gasket, Rocker Cover Retainer Element, Breather Retainer Screw, #10 -24 X .375 Lock Isolator, Rocker Cover Bolt Washer, Special Bolt, 3/8" -16 X 6.57" Shell, Breather (W/Tube) Seal, Breather Shell Cover Screw, #8 -32 X 3/8" Retainer, Rocker Cover Name Plate Pipe, Breather Clamp, 1" I.D. M1-63-62.12 (2 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.12 Parts List Rocker Cover - Continued REF. PART NO. QTY. DESCRIPTION 21 22 5104587 5104586 5104604 103319 1 1 2 2 Hose (1.12" Long) Elbow 26095 Bolt, 1/4" -20 X 1-1/4" Lockwasher, 3/8" M1-63-62.12 (3 Of 3) FSCM No. 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.13 Parts List Fuel Injectors And Connections M1-63-62.13(1 of 2) TM 10-3950-263-14&P-3 Parts List Fuel Injectors And Connections - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * 5111527 5111526 179847 5150250 5121259 5117369 5125108 $229890 5229878 5229872 5226393 5228104 5228739 5228608 5228583 5226913 5226416 5228802 5226719 5228586 5228694 5228696 5228596* 5228766* 5228594 5229806 5228109 5229167 5228601 5226414 5228588 5226186 5228587 5228769 6 6 6 6 6 12 12 6 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 AR 2 2 1 AR Pipe Assembly (Long), Fuel Pipe Assembly (Short), Fuel Bolt, 3/8" -16 X 2" Washer, Injector Clamp Clamp, Injector Connector, Fuel Pipe Washer, Fuel Pipe Connector 7/16" Dia. (Copper) Injector, Assembly (9C90) Tag, Number (9C90) Plunger And Bushing Assembly, Injector - See Note Pin, Bushing Guide Follower, Injector Spring, Injector Plunger Pin, Injector Stop Body Assembly, Injector Plug, Body Dowel Gear, Injector Rack, Injector Retainer, Injector Gear Valve, Injector Check Case, Injector Check Valve Spring, Injector Valve Seat, Injector Valve Spring Case, Injector Valve Spring Tip Assembly, Injector Spray Deflector, Injector Spill Ring, Injector Seal Nut, Injector Valve Cap, Injector Shipping Cap, Injector Filter Gasket, Injector Filter Cap Element (Inlet), Injector Filter Valve Kit, Injector Note: Plunger And Bushing Not Sold Separately. M1-63-67.13(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.14 Parts List Fuel Pump M1-63-62.14(1 of 2) TM 10-3950-263-14&P-3 Parts List Fuel Pump - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 5102257 5150193 5131685 5108064 5146337 141195 5181746 5178700 5174975 5134560 3719219 5181747 5181749 5181748 147481 5174973 103709 5184530 5161003 5174971 5107223 1 1 3 1 1 2 1 1 1 1 8 1 1 1 1 1 1 1 1 1 2 Fork, Fuel Pump Coupling Gasket, Fuel Pump To Engine Bolt (w/Nylon Patch), 5/16" -18 X 3/4" Pump Assembly, Fuel Body, Fuel Pump Pin, Dowel 1/4" X 5/8" Gear And Shaft Assembly, Fuel Pump Drive Shaft, Fuel Pump Drive Gear, Fuel Pump Drive Cover, Fuel Pump Bolt, (w/Lockwasher) Assembly, 1/4" -20 X 3/4" Gear And Shaft Assembly, Fuel Pump Drive Shaft, Fuel Pump Driven Gear Fuel Pump Driven Ball, 1/8" Diameter Steel Valve, Fuel Pump Relief Pin, 5/32" X 1" Straight Spring, Fuel Pump Valve Retaining Gasket, Fuel Pump Valve Plug Plug, Fuel Pump Valve Seal (Lip Type), Fuel Pump Oil M1-63-62.14(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.15 Parts List Fuel Filter And Strainer REF. PART NO. 1 2 3 4 5148023 25010776 25010778 25010782 5148171 QTY. DESCRIPTION 1 1 1 1 1 Cover, Fuel Strainer (Spin on) Cartridge, Fuel Strainer (Spin on) (T-915) Cartridge, Fuel Filter (Spin on) (TP-916) Decal (Spin on) Cover, Fuel Filter (Spin on) M1-63-62.15(1 Of 1) FSCM No. 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.16 Parts List Mechanical Governor M1-63-62.16(1 of 6) TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 8921497 142583 5150941 5124274 5102636 5102559 5102558 455921 5124270 5124273 5150394 5150894 5150893 5101336 5133795 5132962 5150943 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 5132747 114492 9431896 5133680 9421917 120391 5133686 5138335 116337 954987 5101291 5101239 5124332 5150942 5101197 5174286 5117952 5117951 5152929 5174286 5127375 5143866 5150885 5127373 9437946 5127374 5143865 9421917 5117693 9434171 5117193 5122166 145369 907674 5165221 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 2 1 1 Governor Assembly, Limiting (Double Weight 5-800 Idle) Spring, 13/64" Retainer Washer, Governor Lever Pin Link Assembly, Governor Yield Link (9/64" Drill) Link And Pin Assembly Link (.125/.129 Drill) Pin, 1/8" X 1-1/2" Spring Hook Spring Lever And Pin Assembly, Governor Differential Pin, Governor Differential Lever Lever, Governor Differential Housing Assembly, Governor Shaft And Lever Assembly, Governor Screw, Governor Gap Adjusting Pin, 5/16" X 15/16" Governor Operating Shaft Lever Lever, Governor Operating Nut, 1/4"-28 Hex Bearing (Upper), Governor Operating Shaft Shaft, Governor Operating Screw And Lockwasher Assembly, #10 -24 X 7/16" Washer, 7/32" X 1/2" Flat Spacer, Governor Operating Shaft Fork, Governor Operating Shaft Plug, 1-1/16" Expansion Bearing (Lower), Governor Operating Shaft Housing Assembly, Governor Control Housing, Governor Control Tube Pin, 3/16" X 7/16" Dowel Screw, Starting Aid Locknut, 3/8" -24 Screw Assembly, Governor Buffer Spring Screw, Governor Buffer Spring 3/8" -24 Spring, Governor Buffer Locknut, 3/8" -24 Pin, Governor Lever (3.12" Long) Shaft, Governor Control Operating Lever Washer, Flat Lever And Bearing Assembly, Governor Operating Link Bearing Assembly, Needle Lever, Governor Control Link Operating Clip, Governor Control Lever Shaft Lock Screw And Lockwasher, #10 -24 X 7/16" Pin, Split Thread End 1" Long Bearing Assembly, Governor Thrust Riser, Governor Plate, Governor Name Screw, #4 X 3/16" Round Head Bearing, Weight Shaft Gasket, Governor Weight Housing M163-62.16(2 Of 6) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.16 Parts List Mechanical Governor - Continued M1-63-62.16(3 Of 6) TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 5150897 5150941 5150884 5183268 5113906 5147866 5147103 5178581 5185153 5117738 5151487 5183624 5184336 5150923 5102968 5122165 5150892 5182555 5136160 5101432 5102270 5152944 5182558 5182557 114492 5182559 5155596 100129 1 1 1 1 1 2 2 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 Lockwasher Washer, Flat Screw, Bearing Retainer Cap, Governor Weight Housing Weight And Carrier Assembly, Governor Bushing Weight, Governor Low Speed Ring, Retaining Shaft, Governor Weight Weight Assembly, Governor High Speed Washer, Governor Weight Shaft Shaft And Carrier Assembly, Governor Control Carrier, Governor Weight Shaft, Governor Weight Cap, Governor Low Speed Spring Spring, Governor Low Speed Seat, Governor Low Speed Spring Plunger, Governor Spring Spring, Governor High Speed Pin, Governor Low Speed Adjusting Screw, Governor Low Speed Spring Adjusting Gasket Locknut, Governor Spring Retainer Retainer, Governor Spring Nut, 1/4" -28 Housing, Limiting Speed Spring Washer, 21/64" X 9/16" Copper Flat Bolt, 5/16" -18 X 3-1/2" Hex M1-63-62.16 (4 Of 6) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.16 Parts List Mechanical Governor - Continued M1-63-62.16(5 Of 6) TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 68 69 70 71 72 73 5102479 5174429 5153060 5144177 5176557 5102460 5102459 456390 5102461 74 5102464 75 5102463 76 5102462 77 5102990 78 455297 79 5114148 80 5102466 81 5143147 82 5102465 83 5131368 84 5101691 85 5144178 86 5151487 87 5178581 88 5117899 89 9417926 90 103319 91 186647 92 5102408 5100844 93 5146369 94 5126499 95 5104592 96 5104527 97 5124333 98 5123812 99 103319 1005104152 101186272 187512 179827 102 515596 103320 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 2 2 1 1 1 1 4 2 2 2 4 4 1 1 8 2 8 Cover And Shaft Assembly, Limiting Governor Housing Ring, Governor Speed Control Shaft Retaining Retainer, Governor Control Housing Cover Pack Washer Retainer, Governor Control Housing Cover Seal Ring, (.477" X .113" Viton) Cover And Bushing Assembly Cover Pin, 1/4" X 3/4" Split Bushing, Split Shaft Assembly, Speed Control Shaft, Governor Speed Control Shaft, Governor Speed Control Arm, Governor Speed Control Shaft Pin, 5/32" X 7/8" Long Spring Pin, Governor Fulcum Lever Shaft And Lever Assembly, Stop Lever Lever, Governor Stop Shaft, Stop Lever Spring, Stop Lever Seal Ring, (.362" X .113" Viton) Retainer, Governor Cover Stop Lever Shaft Washer, Governor Shaft Ring, Retainer Gasket, Governor Housing Cover Screw And Lockwasher Assembly, 1/4" -20 X 3/4" Hex Lockwasher, 1/4" Bolt, 1/4" -20 X 1" Lever, Stop Lever, Speed Control Spacer, Governor Speed Control Shaft Gasket Clamp, Hose Hose, 1" I.D. X 1" Long Tube Assembly, Control Link Cover Gasket Lockwasher, 1/4" Bolt, 1/4" -20 X 3/4" Hex. (W/Seal Patch) Bolt, 5/16" -18 X 4" Bolt, 5/16" -18 X 5-1/4" Bolt, 5/16" -18 X 2-1/4" Washer, 21/64" X 9/16" Copper Flat Lockwasher, 5/16" M1-63-62.16(6 Of 6) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.17 Parts List Injector Controls REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 103361 5147345 5101387 5101388 9422203 5130509 5101392 120613 5101397 5101295 5101258 142487 5150263 5150843 5124142 5117191 16 5117942 17 18 8920905 5189789 QTY. 2 2 1 1 4 2 3 3 3 2 1 2 1 1 1 1 1 1 DESCRIPTION Pin, 1/16" X 1/2" Cotter Pin Tube And Lever Assembly (Left Bank) Injector Control Tube And Lever Assembly (Right Bank5, Injector Control Bolt, 1/4" -20 X 5/8" Bracket, Injector Control Tube Screw, 1/4" -28 X .90" Nut, 1/4" -28 Jam Lever, Injector Control Tube Rack Spring (Right Helix) Spring (left Helix) Pin, 1/8" X 7/8" Groove Lever, Injector Control Tube Spacer, Injector Control Lever Spring, Return (Green) Link (Short, Left bank), Injector Control Tube To Governor Link (Long, Right Bank), Injector Control Tube To Governor Bracket, Cylinder Throttle Delay Rocker Shaft Plug (Oil Supply) M1-63-62.17(1 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Injector Controls - Continued REF. PART NO. 19 20 21 22 23 24 25 120375 103319 5180116 5113369 5102829 5101835 5103296 QTY. DESCRIPTION 2 2 1 1 1 1 1 Nut, 1/4" -20 Hex Lockwasher, 1/4" Bolt, U 1/4" -20 Lever, Throttle Delay Link Piston Valve, Check M1-63-62.17(2 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.17 Parts List Injector Controls - Continued REF. PART NO. 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 142487 5150258 5150263 103361 5150265 2090271 121902 2090270 121912 5185095 120613 5185096 5123812 138201 103319 21-C-004 9409931 1X4774 QTY. DESCRIPTION 1 1 1 2 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 Pin, Groove Pin, Tube End Lever Pin, Cotter Pin 26095 Fork, Link Nut, Jam Coupling Nut, Jam Rod Nut Adapter Gasket Screw Lockwasher Air Cylinder Assembly Elbow, 90° Street Male Connector, Brass, 3/8" X 1/8" Tube - See M1-71-29.0 M1-63-62.17(3 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 29505 26095 09505 TM 10-3950-263-14&P-3 M1-63-62.18 Parts List Air Inlet Adapter REF. PART NO. 1 2 3 4 5 5101411 427564 103322 5101412 5145013 5121182 QTY. DESCRIPTION 1 8 8 1 1 1 Adapter, Air Inlet Bolt, 7/16" -14 X 1-3/8" Lockwasher, 7/16" Gasket Plug, 3/8" Pipe Plug, 1/4" Pipe M1-63-62.18(1 Of 1) FSCM No. 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.19 Parts List Blower And Blower Drive M1-63-62.19(1 Of 3) TM 10-3950-263-14&P-3 Parts List Blower And Blower Drive - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 5101528 5101037 5145009 5150542 5147544 9428477 142522 5101527 5147543 9428477 142522 5100727# 5100617# 5110330# 7455623# 5147147 5148794 5144784 5145009 5150542 117296 907933# 5141605 5150372# 5153938# 5150855# 5150856# 5146049 5141468 9409060 5147149 5196321 182776 5154398# 5154401 5117778 5101419 9411488 5121905 187491 5121814 5147469* 5173364 5173362 103340 103320 5141474 5173363 103340 103320 5141473 5144410 5144424 1 1 1 2 1 6 2 1 1 6 2 4 4 4 2 2 12 1 1 2 4 2 2 AR AR AR AR 2 2 1 1 1 1 1 1 1 2 4 4 4 4 1 3 3 3 3 2 3 3 3 1 1 1 Blower Assembly (Turbo) Plate, Blower Housing (Front) End Plug, 1/8" Socket Head Pipe Pin, .308" X 2" Dowel Rotor Assembly (Right Helix), Blower Plug, 15/16" Diameter Cup Pin, 1/4" X 1-3/4" Groove Housing, Blower Rotor Assembly (Left Helix), Blower Plug, 15/16" Diameter Cup Pin, 1/4" X 1-3/4" Groove Carrier, Blower Housing End Plate Seal Ring Seal, Blower Housing End Plate Oil Collar, Blower Housing End Plate Seal Ring Bearing, Blower Rotor Front Retainer, Blower Rotor Front Bearing Screw, 1/4" -20 X 5/8" Flat Head Plate, Blower Housing (Rear) End Plug, 1/8" Socket Head Pipe Pin, .308" X 2" Dowel Screw, 5/16" -18 X 1-1/2" Fillister Head Slotted Bearing, Blower Rotor Rear Retainer, Blower Rotor Rear Bearing Shim (.002"), Blower Rotor Gear Shim (.003"), Blower Rotor Gear Shim (.005"), Blower Rotor Gear Shim (.010"), Blower Rotor Gear Spacer, .340" Spacer, .140" Bolt, 1/2" -20 X 1-1/2" Lock Bolt, 1/2" -20 X 1-1/2" Slotted Head Gear Set, Blower Rotor Bolt, 1/2" -20 X 1-1/4" Lockwasher, 1/2" Disc, Blower Rotor Fuel Pump Spacer, Blower Rotor Fuel Pump Coupling Disc Seal Ring (Oil Drain) Bolt, 7/16" -14 X 8-1/4" Washer, 15/32" Diameter Hole Bolt, 3/8" -16 X 5-1/2" Washer, Bolt Retainer Gasket, Blower Spacer Bolt, 5/16" -24 X 3/4" Washer, 5/16" Flat Lockwasher, 5/16" Plate (Spring) Bolt, 5/16" -24 X 1" Washer, 5/16" Flat Lockwasher, 5/16" Coupling Connector Assembly, 5/16" Sealistic (w/Nut) Seal Ring, 5/16" Tube M1-63-62.19(2 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.19 Parts List Blower And Blower Drive - Continued REF. PART NO. QTY. DESCRIPTION 38 39 40 41 5144409 5100901* 5106219 5106872 5154637 1 1 1 1 1 1 5136678 186643 103320 5159714 5146328 5126499* 5147149 5108123 5199669 1 10 10 10 1 1 1 AR AR 42 43 44 45 46 47 48 49 # * Adaptor, Oil Supply Tube Seal, Blower Drive Cover Clamp Assembly, Blower Drive Cover Seal Shaft, Blower Drive Ring, Blower Drive Shaft Retaining Housing Assembly, Tachometer Drive Cable Adapter - See M1-63-62.34 Gasket, Tachometer Drive Adapter Bolt, 5/16" -18 X 201/16" Lockwasher, 5/16" Washer Cover, Blower Housing End Plate Gasket, Blower Housing End Plate Cover Bolt, Hex Slotted Head Blower Kit (Turbo), Repair Gasket Kit (6V), Installation Blower M1-63-62.19(3 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.20 Parts List Turbocharger M1-63-62.20(1 Of 3) TM 10-3950-263-14&P-3 Parts List Turbocharger - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 5101151 5199610 5149160 584713 5198579 5199605 9419006 5149158 5199607 5197583 5199622 5197325 5199852 5149156 5198988 5198049 5198936 5149350 5149153 5199620 5149167 5149154 5199608 5149162 5199612 5149163 AAAC0470 5127610 179839 103321 5131847 5170466 9411981 5131433 5130488 5100770 5101121 5101394 5137620 5101413 5147911 5162888 5101138 5101196 5101192 186629 103320 5121764 5101023 5145581 1 1 1 1 1 1 4 4 1 2 1 1 1 2 2 3 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 4 4 4 1 1 1 4 1 2 1 4 6 1 2 2 1 1 1 5101157 1 Turbocharger Assembly (TV8102) Housing, Turbocharger Compressed Clamp Locknut, 1/4" -28 Nut, 3/8" -24 Hex. Lock Wheel, Turbocharger Compressor Bolt, 1/4" -20 X 1" Plate, Bolt Locking Back Plate (w/Outer Thrust Washer) Ring, Rotor Shaft Oil Seal Spacer, Turbocharger Rotor Thrust Collar, Turbocharger Rotor Thrust Washer, Thrust (Inner) Bearing, Rotor Shaft Spacer Ring, Snap Ring, Seal Housing Assembly, Turbocharger Intermediate Housing Pin Shroud, Wheel Ring, Rotor Shaft Oil Seal Shaft Assembly (w/Wheel), Turbine Clamp Housing, Turbocharger Turbine Locknut, 1/4" -28 Hose Tee, 1/4" X 5/8" Bolt, 3/8" -16 X 1" Lockwasher, 3/8" Cover Gasket, Cover Nut, 3/8" -24 (Seizproof) Washer, .41" X .81" X .14" Stud, 3/8" X 1-7/8" Gasket, Turbocharger Exhaust Inlet Connection Adaptor, Turbocharger Exhaust Inlet Tube (Right Bank), Turbocharger Exhaust Inlet Clamp Assembly Tube (Left Bank), Turbocharger Exhaust Inlet Clamp Assembly Hose, 3-1/2" I.D. X 2-3/4" Long Seal Ring, .984" X 1.39" Bolt, 5/16" -18 X 9/16" (w/Nylon Patch) Elbow (w/Tube), Aftercooler Water Outlet Bolt, 5/16" X -18 X 1" Lockwasher, 5/16" Hose, 1-1/4" X 1-3/4" Long Connector Gasket Adaptor (Inlet Cooler) - See M1-63-62.1 Aftercooler Assembly, Turbocharger M1-63-62.20(2 Of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.20 Parts List Turbocharger - Continued M1-63-62.20(3 Of 3) TM 10-3950-263-14&P-3 M1-63-62.21 Parts List Oil 1 Pump REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 QTY. DESCRIPTION 5102019 5102020 5150014 5117466 5196602 5117587 5117588 5117599 9409011 1 1 1 1 1 1 1 1 8 1 5117020 5121714 103321 103323 186283 186659 179893 5115454 1 1 2 6 2 4 4 1 Pump Assembly, Oil Body Assembly, Oil Pump Plug, 1-1/4" Cup Shaft, Oil Pump Driven Gear Gear Set, Oil Pump Gear, Oil Pump Drive Gear, Assembly, Oil Pump Driven (w/Bushing) Cover, Oil Pump Bolt, 5/16" -18 X 3/4" Lock Key, Oil Pump Drive Gear, 3/16" X 7/8" Woodruff - See M1-63-62.4 Gear (37 Teeth), Oil Pump Drive (On Crankshaft) Gasket, Oil Pump To Cylinder Block Lockwasher, 3/8" Lockwasher, 1/2" Bolt, 3/8" -16 X 3-1/2" Bolt, 1/2" -13 X 3/4" Bolt, 1/2" -13 X 3 Seal, Crankshaft Oil - Front M1-63-62.21(1 Of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.22 Parts List Oil Distribution System REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 5127307 103341 5148480 5117242 5148481 5127274 5167380 5118302 103341 179850 5104754 123221 103321 103341 QTY. DESCRIPTION 2 2 2 1 2 1 1 1 2 2 1 2 2 2 Bracket, Oil Pump Screen Support Washer, 3/8" Flat Screw (w/Lockwasher), 3/8" -16 X 7/8 Hex. Gasket, Oil Pump Inlet Pipe Screw (w/Lockwasher), 3/8" -16 X 7/8 Hex. Pipe, Oil Pump Inlet Gasket, Oil Pump Inlet Pipe Cover, Oil Pump Inlet Screen Washer, 3/8" Flat Bolt, 3/8" -16 X 2-3/4" Screen, Oil Pump Inlet Nut, 3/8" -16 Zinc Lockwasher, 3/8" Washer, 3/8" Flat M1-63-62.22(1 Of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 Parts List Oil Pressure Regulator Or Relief Valve REF. PART NO. QTY. DESCRIPTION 1 5122896 5122895 1 1 2 3 4 5 6 7 8 5117975 5126327 5117973 5122894 5148480 5117269 457008 1 1 1 1 2 1 1 Regulator Assembly, Oil Pressure Relief Valve Assembly, Oil Pressure Following Items Make Up Oil Pressure Regulator Or Relief Valve (Pin Location Makes Difference) Seat Spring Valve Body Bolt/Lockwasher Assembly, 3/8" -16 X 7/8" Gasket Pin, 3/16" X 1-1/2" Spring M1-63-62.23 (1 Of 1) TM 10-3950-263-14&P-3 M1-63-62.23 FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.24 Parts List Oil Filter REF. PART NO. 1 2 3 4 5 179849 186628 103321 5123932 25010971 5104416 QTY. DESCRIPTION 1 3 4 1 1 1 Bolt, 3/8" -16 X 2-1/2" Bolt, 3/8" -16 X 1-1/2" Lockwasher, 3/8" Gasket, Oil Filter Adapter Element, Spin-on Oil Filter (AC Type - PF911) Adaptor Assembly, Spin-on Oil Filter M1-63-62.24(1 Of 1) FSCM No. 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.25 Parts List Oil Cooler M1-63-62.25(1 of 2) TM 10-3950-263-14&P-3 Parts List Oil Cooler - Continued REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 5150155 8541903 5102506 5102265 186625 103320 5102342 5102264 5126280 5117535 5177772 5177773 5177778 5177777 5152148 103321 186619 186628 179846 117049 103321 186622 5125598 5125599 5188036 5199782 5101156 186619 103321 5145012 5117476 5129421 103647 5132634 103320 215386 1 1 1 1 5 5 1 1 2 2 1 1 1 1 1 7 1 2 5 2 4 2 1 1 2 1 1 3 3 2 1 1 1 1 8 8 DESCRIPTION FSCM No. Gasket, Oil Cooler Core Inner Core Assembly (18 Plate), Oil Cooler Gasket, Oil Cooler Core Outer Cover (Plate), Oil Cooler Adapter Bolt, 5/16" -18 X 7/8" Lockwasher, 5/16" Gasket, Oil Cooler Adapter Cover Adapter, Oil Cooler Spacer Gasket, Oil Cooler Adapter To Block Plug, 18mn X 1.5mn Oil Cooler By-Pass Valve Gasket, Oil Cooler By-Pass Plug Spring, Oil Cooler By-Pass Valve Valve, Oil Cooler By-Pass Washer, 3/8" Copper Lockwasher, 3/8" Bolt, 3/8" -16 X 1-1/8" Bolt, 3/8" -16 X 1-1/2" Bolt, 3/8" -16 X 1-7/8" Nut, 3/8" -24 Hex. Lockwasher, 3/8" Bolt, 3/8" -16 X 1-1/4" Flange, Oil Cooler Water Outlet Seal Ring, Oil Cooler Water Outlet Flange Clamp, Oil Cooler Water Inlet Hose Hose (2.26" Long), Oil Cooler Water Inlet (Bulk) Elbow Bolt, 3/8" -16 X 1-1/8" Lockwasher, 3/8" Plug, 1/2" Pipe Gasket, Oil Cooler Water Inlet Connection Housing, Oil Cooler Draincock, 1/4" Decal, Directional Lockwasher, 5/16" Bolt, 5/16" -18 X 6" M1-63-62.25(2 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.26 Parts List Dipstick REF. PART NO. 1 2 3 4 5127232 5106906 5104477 5135428 137401 QTY. 1 1 1 1 1 DESCRIPTION FSCM No. Dipstick (X=30", Y=1", Z=27.76") Seal, Dipstick Guide (3-5/8" Long), Dipstick Adapter, 22.70" Dev. Length Nut, 1/2" Flared Tube M1-63-62.26(1 of 1) 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.27 Parts List Oil Pan REF. PART NO. 1 2 3 4 5125670 5164294 5117230 5148480 5146309 QTY. 1 2 1 24 1 DESCRIPTION FSCM No. Pan, Oil26095 Spacer, 13/32" X 7/8" X 1/8" Gasket, Oil Pan To Block Bolt, 3/8" -16 X 7/8" (w/Lockwasher) Plug, 1/2" Pipe M1-63-62.27(1 of 1 ) 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.28 Parts List Water Pump REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 8922333 274746 5117972 221436 5101168 5130959 8921150 5146254 2954945 908270 5123150 8922325 141190 103322 186292 5101160 5101161 5142549 103342 179862 5103524 5103544 QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 1 2 1 1 1 1 DESCRIPTION FSCM No. Pump Assembly, Water Ring, Retaining Nut, 7/16" -20 Hex Washer, 15/32" X 59/64" Impeller (w/Insert), Water Pump Seal, Water Pump Seal, Water Pump Shaft Bearing Oil (Lip Type) Gear, Water Pump Drive Bearing, Water Pump Bearing, Water Pump Shaft, Water Pump Body, Water Pump Pin, 1/4" X 5/16" Dowel Lockwasher, 7/16" Bolt, 7/16" -14 X 4-1/2" Ring, Seal Cover, Water Pump Plug, 3/4" -14 Square Socket Pipe Washer, 7/16" Flat Bolt, 7/16" -14 X 1-1/2" Ring, Internal Retaining Ring, Seal 26095 M1-63-62.28(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.29 Parts List Thermostat And Water By-Pass Tube M1-63-62.29(1 of 2) TM 10-3950-263-14&P-3 Parts List Themostast and Water By-Pass Tube - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 186283 9418964 103321 5186841 5146357 5121182 5199776 5145009 5117786 5100860 5117993 5145009 5115214 5142549 5111798 186628 5125018 5152148 103341 455537 5106003 5102651 5100859 5132155 5100858 5132155 5100778 5123570 186628 427567 179839 103321 450517 8 Bolt, 3/8" -16 X 3-1/2" 1 Bolt, 3/8" -16 X 5" 9 Lockwasher, 3/8" 4 Clamp 1 Tube, Water By-Pass 1 Plug, 1/4" 2 Hose, 1-3/4" X 2.760" Long 1 Plug, 1/8" Pipe 1 Gasket, Thermostat Housing Cover 1 Gasket, Thermostat Housing Cover 1 Gasket (Left Bank), Thermostat Housing 1 Plug, 1/8" -27 Pipe 4 Plug, 1/2" Pipe 2 Plug, 3/4" Pipe 2 Plug, 1" Pipe 2 Bolt, 3/8" -16 X 1-1/2" 1 Washer, 7/16" 4 Washer, 3/8" Copper 2 Washer, 3/8" 1 Bolt, 3/8" -16 X 4" 1 Housing (Left Bank), Thermostat 2 Thermostat (1800 Opening Temp.) 1 Cover Assembly (Left Bank), Thermostat Housing 1 Seal, Thermostat 1 Cover Assembly (Right Bank), Thermostat Housing 1 Seal, Thermostat 1 Housing (Right Bank), Thermostat 1 Gasket (Right Bank), Thermostat Housing 1 Bolt, 3/8" -16 X 1-1/2" 1 Bolt, 7/16" -14 X 1-3/4" 1 Bolt, 3/8" -16 X 1" 2 Lockwasher, 3/8" 1 Bolt, 3/8" -16 X 4-3/4" M1-63-62.29(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R184 Fan M1-63-62.30 (1 of 2) M1-63-62.30 TM 10-3950-263-14&P-3 Parts List Fan - Continued REF. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 454879 103320 114493 5189119 5103718 187201 5103079 103325 5131978 271574 8922143 5131978 103323 103325 9409053 190770 8922143 5103860 5103861 5103951 7450941 191758 9422755 5104317 9409060 455322 5100890 903206 5103862 R184 QTY. 6 6 6 1 1 1 1 3 3 2 1 4 2 2 4 2 2 1 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION FSCM No. Bolt, 5/16" - 24 X 2-1/4" Lockwasher, 5/16" Locknut, 5/16" - 24 Blade (36" - 8 Blade, Blower), Fan Spacer (.80" Thick) Fan Hub Bolt, 1/2" - 13 X 4-3/4" Support, Fan Mounting Lockwasher, 5/8" Washer, .53" X 1" Bolt, 5/8" X 5" Bolt, 5/8" X 2-1/4" Washer, .53" X 1" Lockwasher, 1/2" Lockwasher, 5/8" Bolt, 1/2" - 13 X 1-1/2" Bolt, 1/2" - 13 X 3" Bolt, 5/8" - 11 X 2-1/4" Pulley And Spindle Assembly, Fan Spindle Assembly Seal, Grease Bearing Grease Fitting, 1/8" Snap Ring Washer, Fan Hub Bolt, 1/2" - 20 X 1-1/2" Lock Fitting, 1/8" Lube Pressure Relief Cap, Fan Hub Bearing Pulley, (3 Groove, 9.12"Dia.) Fan M1-63-62.30 (2 of 2) WP 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.31 Parts List Exhaust Manifold REF. 1 2 3 4 5 6 PART NO. QTY. 5101436 127855 5102735 5104439 5112899 5101435 5122866 1 8 4 4 8 1 2 DESCRIPTION FSCM No. Manifold (End Outlet, Right Bank), Exhaust Nut, 7/16" -20 Crab Washer, 7/16" X 1-1/4" (Dished) Stud, 7/16" -14 X 2-3/32" Exhaust Manifold Manifold, (End Outlet, Left Bank), Exhaust Gasket, Exhaust Manifold M1-63-62.31(1 of 1) 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.32 Parts List Battery Charging Generator M1-63-62.32(1 of 2) TM 10-3950-263-14&P-3 Parts List Battery Charging Generator - Continued REF. 1 2 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. QTY. 5148276 5148834 5117082 442733 179884 103323 102637 5148837 5148796 1100081 9427945 132715 103323 102637 5148833 179862 103322 5133747 5143234 274621 124543 5143233 5133682 908002 272906 5148836 124543 186318 186658 9430221 5133683 1538710 5139545 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 3 1 1 1 DESCRIPTION FSCM Belt Set (2 Belts), Generator Drive Strap, Generator Adjusting Spacer, .164" Thick Bolt, 1/2" -13 X 1-1/4" Bolt, 1/2" -13 X 1-3/8" Lockwasher, 1/2" Nut, 1/2" -13 Bracket, Generator Adjusting Strap Pulley (2.76" Diameter, 2 Groove), Generator Generator Assembly Bolt, 1/2" -13 X 6-1/4" Washer, Special Lockwasher, 1/2" Nut, 1/2" -13 Bracket, Generator Mounting Bolt, 7/16" -14 X 1-1/2" Lockwasher, 7/16" Drive Assembly, Generator Hub, Generator Drive Pulley Lock Ring Key, 1/4" X 1" Woodruff Shaft, Generator Drive Pulley Spacer 26095 Bearing, Generator Drive Nut, 3/4" -16 Hex. Lock Pulley (4.66" Diameter, 2 Groove), Generator Drive Key, 1/8" X 1/2" Woodruff Bolt, 3/8" -24 X 5-1/4" Bolt, 3/8" -24 X 5-1/2" Bolt, 3/8" -24 X 4" Retainer, Generator Drive Bearing And Oil Seal Seal, Generator Drive Oil Coupling, Flange Mounting Alternator Drive M1-63-62.32 (2 of 2) No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.33 Parts List Starting Motor REF. PART NO. 1 2 3 4 1114128 9418228 103325 103030 5130995 QTY. DESCRIPTION 1 3 3 3 1 Motor Assembly, Starting Bolt, 5/8" -11 X 1-3/4" 12 Point Lockwasher Nut, 5/8" -18 Hex. Gasket, Starting Motor M1-63-62.33(1 of 1) FSCM No. 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.34 Parts List Tachometer Drive REF. PART NO. QTY. DESCRIPTION 1 5106763 1 2 5106591 5106756 5136680 5136679 5136682 120375 5179613 1 1 1 1 1 1 1 3 4 5 Adapter (900 Right Hand, 1:250 Ratio), Tachometer Drive Cable Shaft Assembly, Tachometer Drive Cable Adapter Housing Assembly Housing 26095 Fitting 26095 Clamp, Tachometer Drive Adapter Retaining Nut, 1/4" -20 Hex. Bolt, 1/4" -20 X 1-1/4" M1-63-62.34(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.35 Parts List Engine Mounting REF. 1 2 3 4 5 6 7 8 9 PART NO. 5179360 103322 454947 186679 455537 9415559 103321 5122294 5179345 QTY. DESCRIPTION FSCM No. 1 Support Assembly, Engine Front Trunnion Mounting 2 Lockwasher, 7/16" 2 Bolt, 7/16" -14 X 2-1/4" 2 Bolt, 3/8" -16 X 1-1/4" 2 Bolt, 3/8" -16 X 4" 4 Bolt, 1/2" -13 X 4-1/4" 2 Lockwasher, 3/8" 1 Seal, Crankshaft Oil (Front) - See M1-63-62.4 1 Body Assembly, Oil Pump - See M1-63-62.21 1 Trunnion, Engine Front 1 Ring, Engine Front Trunnion Mounting Support Cushion M1-63-62.35(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.36 Parts List Air Compressor REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. QTY. 179827 103320 5110411 5110410 8921208 444042 142767 5109117 5120020 190367 5138467 2 2 1 1 1 1 1 1 2 1 1 5121182 5129184 444000 5104506 5144866 5141773 5170450 1 1 1 1 1 1 1 4 1 103375 DESCRIPTION FSCM No. Bolt, 5/16" -18 X 2-1/4" Lockwasher, 5/16" Strainer Assembly, Air Compressor Gasket Compressor Assembly (15.5 CFM), Air 90° Elbow, 3/8" Street Bushing, 3/4" X 3/8" Reducing Hose, 1/2" X 27", Air Compressor Water Inlet Fitting, Hose 90° Elbow, 1/4" Street Hose Assembly, Air Compressor Lube Oil Supply #5 X 25-1/2" Plug, 1/4" Pipe Tee, 1/4" Pipe Adapter, 1/4" Pipe Gasket, Air Compressor Hub, Air Compressor Drive Coupling, Air Compressor Drive Plate, Air Compressor Drive Bolt, 3/8" -24 X 1.20" - See M1-63-62.10 Pin, 3/32" X 1-1/4" Cotter M1-63-62.36(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Air Compressor - Continued REF. PART NO. QTY. 20 21 22 5120020 5121810 118752 2 1 1 FSCM No. DESCRIPTION Fitting, Hose Hose, Air Compressor Water Outlet 1/2" X 12-1/2" Connector, 1/2" Flared Tube M1-63-62.36 (2 of 2) 26095 26095 26095 TM 10-3950-263-14&P-3 M1-63-62.37 Parts List Throttle Control Solenoid REF. 1 2 3 4 5 6 7 8 9 PART NO. QTY. 5102710 123435 103319 120613 1118128 5102583 5101829 100001 181314 120393 103319 121902 179838 186273 120392 5155596 103319 120382 120613 179796 1 1 1 1 1 1 1 3 1 4 4 4 1 1 2 1 1 1 2 1 DESCRIPTION FSCM No. Lever, Governor Control Bolt, 1/4" -28 X 5/8" Lockwasher, 1/4" Nut, 1/4" -28 Jam Solenoid, Throttle Control Strap, Solenoid Bracket Bracket, Throttle Control Solenoid Bolt, 1/4" -28 X 3/4" Bolt, 1/4" -28 X 7/8" Washer, 1/4" Flat Lockwasher, 1/4" Nut, 1/4" -28 Bolt, 3/8" -16 X 7/8" Bolt, 5/16" -18 X 4-1/4" Washer, 9/32" X 5/8" Cadmium Plate Washer, 21/64" X 9/16" Copper Lockwasher, 1/4" Lockwasher, 3/8" Nut, 1/4" -28 Cadmium Jam Bolt, 1/4" -20 X 7/8" M1-63-62.37(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M 1-63-62.38 Parts List Ether Start Kit REF. ’ 1 2 3 4 5 6 7 8 9 PART NO. 820-0270 820-2575 820-2400 820-2532 820-2540 820-2567 820-2982 NL54-144 820-0327 QTY. DESCRIPTION FSCM No. 1 Ether Start Kit 1 Clamp, Cylinder 1 Valve Assembly 1 Valve Fitting 1 Tubing 1 Screw, Wire Stop 1 Atomizer 1 Cable 1 Cylinder, Fuel M1-63-62.38 (1 Of 1) 06991 06991 06991 06991 06991 06991 06991 06991 06991 TM 10-3950-263-14&P-3 M1-63-63.0 Parts List Throttle Control - GM6V-92TA Engine M1-63-63.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List Throttle Control- GM6V92TA Engine REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 18A4444 16A165 HC115 JC501 18D184 lX180 1 1 1 2 2 4 22A1629 lX180 1 2 3H1342 1X2581 22A2699 19A1978 lX3717 1 4 1 1 2 1X3809 2 14 15 16 19A1981 19A2538 AC5046 1X2574 lX3809 1 1 1 1 1 17 18 19 20 21 HC2470 19A521 lX193 1 1 1 7 8 9 10 11 12 13 FSCM No. Throttle Control Bracket Adjustable Yoke End Clevis Pin Spring Eye Bolt Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1/4" Throttle Control Solenoid, See Keysheet M1-63-62.37 Eye Bolt Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1/4" Throttle Lever Hexagon Jam Nut, 5/16", UNF-2B, Steel, Zinc Plated Extended Cable Throttle Control Cable Capscrew, Hex Head, UNF-Class 2A-Grade 5, Zinc Plated, 3/8" X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Splash Guard Accelerator Clamp Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Throttle Stop Ball Joint 36422 Hexagon Jam Nut, 1/4" UNF-2B, Steel, Zinc Plated Air Cylinder, See Keysheet M1-38-69.0 Throttle Handle, Supplied With Cable, Item #12 * See Vendor Annex For FSCFM No. M1-63-63.0 (2 Of 2) 36422 36422 36422 36422 36422 90483 36422 90483 * 90483 36422 36422 90483 72968 36422 36422 36422 90483 72968 36422 90483 TM 10-3950-263-14&P-3 M1-63-65.0 Parts List GM6V-92 Air Intake Assembly REF. PART NO. QTY. 1 1X2574 1X3809 6 6 2 3 22A2683 28A1838 22A2725 32H212 1X5638 1 2 1 5 2 7 8 9 10 11 19A2406 3A8408 19A2542 19A2408 18A4316 19A2409 46A208 1X5278 1 1 1 1 1 1 1 1 12 18A3244 1 4 5 6 DESCRIPTION FSCM No. Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Sheet Elbow Tube Clamp Mounting Band, Steel Mounting Legs Spot Welded To Band, 11" I.D. Air Cleaner Element Label - Air Cleaner Service Restriction Indicator Sleeve Intake Adaptor Hump Hose Hose Clamp, Stainless Steel Heavy Duty, Rigid Floating Channel Bridge, Bolt Alloy Steel Heat Treated, Steel Hex Locknut With Nylon Insert, 5-1/2" Clamp * See Vendor Annex List for FSCFM No. M1-63-65.0 (1 Of 1) 90483 72968 36422 36422 36422 36422 18265 36422 * 36422 36422 36422 36422 36422 54646 36422 TM 10-3950-263-14&P-3 M1-63-68.0 Parts List Up Exhaust - GM6V-92TA Engine REF. PART NO. QTY. 22A2387 36A1117 18A4448 1X3783 2 4 4 4 1X5079 4 2 3 4 5 6 18A3786 18A3752 28A1475 22A2706 1X4022 1 1 1 1 10 7 8 9 10 22A2704 22A2432 18A4300 1X3599 1 1 1 4 1X3809 4 1 2 DESCRIPTION FSCM No. Plate Rubber Mount Washer 36422 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" x 2" Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Weather Cap Tube Muffler Muffler Support Locking Capscrew, Hex Head, UNC Class 2A Grade 5, 3/8" x 2-1/2" Muffler Guard Guard Exhaust Pipe Capscrew, Hex Head, UNC Class 2A Grade 5, 3/8" x 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" M1-63-68.0 (1 of 2) 36422 36422 90483 72968 36422 36422 36422 36422 72968 36422 36422 36422 90483 72968 TM 10-3950-263-14&P-3 Parts List Up Exhaust - GM6V-92TA Engine - Continued REF. PART NO. QTY. 1X4 4 22A2630 1X3357 1 2 1X3809 2 1X4 2 18A4437 31H305 18A4436 36A1117 18A4448 1X3783 1 1 1 2 2 2 1X5079 2 1X3357 4 1X3809 4 18A4299 22A2385 18A2315 18A4301 1X3599 1 1 6 1 6 1X3809 6 22 1X4242 4 23 22A2663 1 11 12 13 13 14 15 16 17 18 19 20 21 DESCRIPTION FSCM No. Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Bracket 36422 Capscrew, Hex Head, UNC Class 2A Grade 5, 3/8" x 1-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Exhaust Pipe V-Band Clamp Sheet, 10 Ga. Rubber Mount Washer 36422 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" x 2" Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" x 1-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B 3/8" Bracket 36422 Exhaust Pipe Hose Clamp Exhaust Pipe Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" x 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Locking Capscrew, Hex Head, UNC Class 2A Grade 5, 1/4" x 3/4" Bracket M1-63-68.0 (2 of 2) 86157 90483 72968 86157 36422 36422 36422 36422 90483 72968 90483 72968 36422 36422 36422 90483 72968 72968 36422 TM 10-3950-263-14&P-3 Parts List Engine Wiring, GM GV92TA M1-66-32.0 NA284-C M1-66-32.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Engine Wiring, GM GV92TA - Continued REF. 1 2 3 4 5 6 7 8 9 10 PART NO. QTY. 28A471 45J279 17A1709 18A2248 18A2430 28A1038 18A2372 22A1264 18A2495 18A2863 28A1496 22A2366 1 1 1 4 1 1 1 1 1 1 1 1 DESCRIPTION FSCM No. Oil Pressure Sending Unit Temperature Sending Unit Ground To Frame Cable Wire Assembly Wire Assembly Wire Assembly Wire Assembly Relay Wire Assembly Tachometer Sending Unit Wire Harness (GMC Eng. - Junction Blk.) M1-66-32.0 (2 Of 2) 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Battery Box Assembly REF. PART NO. M 1-66-82.0 QTY. 1 822003013 AR 2 3 17A2761 824025001 1 AR 4 1X623 8 1X4638 8 5 6 18A2746 1X2572 1X5080 2 6 6 7 8 9 28A1699 18A369 1X2919 1X5080 1 2 4 4 10 22A1765 18A478 2 4 DESCRIPTION FSCM No. Hose, Straight Engine Coolant, Non-Wire Reinforced, 3 Or 4 Ply, Meets 20R1, Class B Tube, Class C Cover, Heavy Wall, 1-1/2" I.D. By 18" (45cm) Long Adjustable Clamp Flexible Steel Core Embossed Vinyl Trim, 80 Durometer Hardness, Tensile Strength 2200 PSI MIN., .390" X .520", Sof-Tone Texture Machine Screw, Round Head, Carbon Steel ASIM A307, Zinc Plated, #10 X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Battery Capscrew, Hex Head, UNC Class 2A, Grade 5, 5/16" X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Battery Box Wood Board Capscrew, Hex Head, UNC Class 2A, Grade 5, 5/16" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Battery Brace Bracket M1-66-82.0 (1 Of 2) 24161 36422 08737 90483 72968 36422 90483 72968 36422 36422 90483 72968 36422 36422 TM 10-3950-263-14&P-3 Parts List Battery Box Assembly - Continued REF. PART NO. QTY. 11 12 13 22A1766 18A504 1X3913 1X3 28A1698 1X2574 1X4 1X3809 4 4 4 4 1 4 4 4 AC4044 AC4043 18A1382 2 2 1 14 15 16 17 18 DESCRIPTION FSCM No. Battery Brace J-Bolt Wing Nut, Nylon Insert, Zamak Alloy, Updated, 5/16" NC Plain Washer, Hot Rolled, Mild Steel, Zinc Plated 5/16" Battery Box Lid Capscrew, Hex Head, UNC Class-2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Hood Catch Hood Catch Battery Hold Down M1-66-82.0 (2 Of 2) 36422 36422 90483 86157 36422 90483 86157 72968 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Hour Meter Assembly REF. 1 2 3 4 5 6 7 R983 PART NO. QTY. 18A2030 1 19A2486 8H1079 19A2485 20J3032 1 2 1 1 DESCRIPTION M1-66-85.0 FSCM No. Radiator Reference Only Hour Meter Horns, Reference Only Wire Assembly Pressure Switch Wire Assembly Ground Wire M1-66-85.0 (1 Of 1) 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Light Wiring R983 M1-67-24.1 (1 Of 2) M1-67-24.1 TM 10-3950-263-14&P-3 Parts List Light Wiring - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 R983 PART NO. QTY. 18A1807 MS15570 RC422 RC417 18A1783 4001 18A1784 4000 RC416 RC417 36A2990 1X3743 1X5079 2 1 7 7 1 2 1 2 7 14 1 2 2 22A2712 12A960 12A961 12A962 18B375 12A3055 1 1 1 2 1 2 8A5246 18A3435 1156 18A3453 1X3743 1X5079 1 1 1 1 2 2 28A1038 28A1496 17H112 18A2430 RC422 22A2767 1A1810 1157 18A2504 2 1 1 1 5 1 2 18A3139 194 18A3823 MS15570 36A2990 18A3406 18A3788 3 1 4 1 2 1 1 DESCRIPTION FSCM No. Turn Signal - Amber Incandescent Lamp Shur-Plug, Receptacle Term-Bullet, Wire L.H. Dual Headlamp Incandescent Lamp R.H. Dual Headlamp Incandescent Lamp 3-Way Connector Term-Bullet Wire Horn Relay Solenoid Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Wire Assembly Horn Horn Nut Wire Assembly Wire Assembly L.H. Side Panel Assembly, See M1-71-29.0 Ground Wire Back-Up Lamp Incandescent Lamp Plate Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Ground Wire Speedometer Sending Unit Fuel Sending Unit Ground Wire Shur-Plug, Receptacle Grille Wire Assembly Rear Light Incandescent Lamp License Plate Light Incandescent Lamp I.D. Lights Incandescent Lamp Clearance Lights Incandescent Lamp Solenoid Reverse Switch Back-Up Alarm M1-67-24.1 (2 Of 2) 36422 96906 36422 36422 36422 08805 36422 08806 36422 36422 36422 90483 72968 36422 36422 36422 36422 36422 36422 36422 36422 08805 36422 90483 72968 36422 36422 36422 36422 36422 36422 36422 08805 36422 08805 36422 08805 36422 08805 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Rotary Warning Light REF. R384 PART NO. QTY. 1 AC4959 1X6483 1 3 2 3 22A3100 3A13018 7400 810005001 1 1 4 AR 4 5 6 1R379 22A3108 Ref. 22A3101 5 1 1 DESCRIPTION M 1-67-24.2 FSCM No. Rubber Grommet Hex Head Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, 3/8" X 1-1/4" Rotary Warning Light Dome Lens Incandescent Lamp Non-Metallic Flexible Conduit Automotive Loom SAE Spec. J562, 3/16" I.D. X 19" Cable Tie Fuse Holder Existing Headlight Switch Label M1-67-24.2 (1 of 1) 36422 90483 36422 08805 97030 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Cab Wiring M 1-68-64.1 NA334-D M1-68-64.1 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List Cab Wiring - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 28A844* RC417 RC416 RC417 28A1044 18A2375 RC417 RC422 RC417 RC417 RC422 28A836 RC376 RC238 28A1038 28A1946 RC422 RC416 RC417 28A1045 28A1037 18A3437 26R2 QTY. 9 9 9 9 7 1 18 18 1 3 2 1 1 1 1 1 4 1 5 2 1 1 1 DESCRIPTION FSCM No. Light Kit 36422 Term-Bullet Wire Connector, 3-Way Term-Bullet Wire Wire Assembly Dimmer Switch Term-Bullet Wire Receptacle, Shur-Plug Term-Bullet Wire Term-Bullet Wire Receptacle, Shur Plug Socket Flasher Warning Buzzer (In Cab) Wire Assembly Wire Assembly Receptacle, Shur-Plug Connector, 3-Way Term-Bullet Wire Wire Assembly Wire Assembly Wire Assembly Cigarette Lighter Note: For The Following Items, See The Keysheet 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 Gauges (See Keysheet M1-73-21.0) Lights (See Keysheet M1-71-25.0) Heater (See Keysheet M1-16-2.0) Defroster (See Keysheet M1-16-0.O) * MS15572 Replacement Bulbs M1-68-64.1 (2 Of 2) 96906 TM 10-3950-263-14&P-3 Parts List Tires And Rims REF. 1 2 3 PART NO. AC3748 1A2625 22A840 12A794 18A4568 18A4569 18A4570 22A841 22A2585 M1-69-21.0 QTY. 8 4 12 1 1 1 1 1 1 DESCRIPTION FSCM No. Extension, Tire Valve Band, Rim Spacer (Rear Axle) Tire And Rim Assembly Valve Protector Plates Rim Base Rim Flange Rim Lock Ring Tire & Tube Assembly Tire Flap M1-69-21.0(1 Of 1) 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Carrier Cab R284 M1-71-25.0 (1 of 7) M1-71-25.0 TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued REF. PART NO. QTY. 1 18A4565 1 2 18A4566 1 3 1X2669 20 4 5 6 1893 36A1003 1X3317 7 7 14 7 8 9 10 18A4714 1X5405 2 2 2 12 11 1X2248 4 12 13 14 15 16 17 18 19 20 21 22 23 24 25 18A1661 22A1999 3A10517 3A7318 1X3302 1X3734 22A2374 1X3357 1X3777 22A2371 22A2259 1X5079 1X3728 1X3809 8 1 1 4 2 2 2 4 3 1 1 13 4 114 26 27 28 29 30 31 1X1351 1X3717 28A1688 18A2916 NC1789 1X2730 105 77 1 2 2 24 32 33 22A1996 1X5080 1 15 34 35 36 1X3 1X2573 1X1876 15 15 6 37 38 39 40 41 42 43 44 28A1483 22A1995 1X2574 22A1997 AC5493 18A4457 18A4565 2 1 1 2 1 4 1 1 R284 DESCRIPTION Mirror Head Mirror Arm Assembly Tapping Screw, Pan Head, Thread Forming Type B, Steel, Zinc Plated, #10 X 5/8" Incandescent Lamp Clearance Light Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, UNC-2A, #8 X 1/2" Dual Headlight - See M1-67-24.1 Incandescent Lamp - See M1-67-24.1 Chrome Door Assembly Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, UNC-2A, #10 X 1/2" Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, UNC-2A, 1/4" X 1/2" Tap Screw Rear Hood Panel Cover Latch Assembly Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 1-1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 2" Boom Guide Cushion Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/4" X 1-1/4" Boom Guide Cushion Boom Guide Locknut, Nylon Insert, Hex, ASL UNC-3B Thread, 1/4" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-3/4" Locknut, Hex, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 3/4" L.H. Hood Top Boot Boot Plate Tapping Screw, Pan Head, Thread Forming Type AB, Steel, Zinc Plated, #10 X 1/2" L.H. Side Panel Locknut, Hex, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Capscrew, Hex Head, UNC Class 2A, Grade 5, 5/16" x 1" Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, UNC-2A, #8 X 3/8" Turn Signal - See M1-67-24.1 Grille Front Rail Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" R.H. Side Panel Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/4" X 3/4" Bracket Mirror M1-71-25.0 (2 of 7) FSCM No. 36422 36422 90483 08805 36422 90483 36422 90483 90483 36422 36422 * * 90483 90483 36422 90483 90483 36422 36422 72968 90483 72968 86157 90483 36422 36422 36422 90483 36422 72968 86157 90483 90483 36422 36422 90483 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued R284 M1-71-25.0 (3 of 7) M1-71-25.0 TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued REF. PART NO. QTY. 45 1X2572 7 46 22A1998 1 47 22A2178 1 48 22A2260 1 49 1X4 4 50 1X1081 4 51 28A1689 1 52 1X3808 12 53 22A1697 2 54 28A1486 1 55 28A1485 1 56 1X3971 8 57 58 59 60 61 CA81 28A1335 18A3662 28A1336 1X3765 4 4 4 4 2 1X3739 2 62 824036002 AR 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 28A1234 3A7549 18N322 3A7547 3A9583 3Q525 3A9582 3A7548 3A7546 3A9581 3A5738 3A12908 3A7540 3A7542 3A7541 3A7543 3A7551 3A5725 3A7640 3A7545 3A7537 MS35478 3A9584 3A7538 3A7546 3A7552 3A7500 3A7499 3A7508 1 1 2 1 1 1 1 1 1 1 1 2 1 1 AR 1 1 1 1 1 1 1 1 1 1 1 1 1 1 R284 DESCRIPTION Capscrew, Hex Head, UNC Class 2A, Grade 5, 5/16" X 3/4" Rear Hood Top Hood Ledge Boom Guide Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Cotter Pin, Extended Prong, Square Cut, 1/16" X 1" R.H. Hood Top Locknut, Nylon Insert, Hex ASL UNC-3B Thread, 1/2" Bar Top Support Center Hood Support Capscrew, Hex Head, UNC Class 2A, Grade 5, W/Patch, 3/8" X 1" Washer Cab Mount Vibration Pad Spacer Capscrew, Hex Head, UNC, Class 2A, Grade 5, Zinc Plated, 1/2" X 5" (Rear) Capscrew, Hex Head, UNC, Class 2A, Grade 5, Zinc Plated, 1/2" X 3-1/4" (Front) Rubber Strip, Closed Cell Neoprene Sponge Rubber, 1-1/2" X 2" Cab Assembly Double Glass Run Channel Finger Lift Lock Side Sliding Window Weather Stripping Side Sliding Window Lock Roof Head Liner Rear Window Mounting Rubber Machine Screw Striker Pin Striker Pin Plate Shim Plate Grab Handle Mounting Rubber Side Window Wire Harness Dome Light Incandescent Lamp Front Window Mounting Rubber Vent Door Door Assembly Lock Cylinder & Keys Outside Door Handle Weather Swipe M1-71-25.0 (4 of 7) FSCM No. 90483 36422 36422 36422 86157 20859 36422 72968 36422 36422 36422 72968 36422 36422 36422 36422 90483 90483 08737 36422 * * * * * * * * * * * * * * * * * * * * 08805 * * * * * * * TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued R284 M1-71-25.0 (5 of 7) M1-71-25.0 TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued REF. PART NO. QTY. 92 3A2028 1 93 3A2026 4 94 3A7523 AR 95 3A12794 1 96 3A2035 3 97 3A9585 1 3A12905 1 98 3A12906 1 99 3A12907 1 100 3A2036 1 101 3A7512 AR 102 3A7505 AR 1033A7525 2 1043A7507 1 1053A7513 2 1063A7503 AR 1073A7502 AR 1083A7514 1 1093A7521 1 1103A7522 1 1113A7504 1 1123A7506 1 1133A7535 1 1143A7529 1 1153A7530 2 1163A7534 1 1173A7531 1 1183A7533 2 1193A10526 1 1203A7527 1 1213A7524 1 1223A10527 AR 1233A7532 1 1243A12135 1 1253A7519 6 1263A7518 6 1273A7516 AR 1283A7515 1 1293A7509 1 13018A4675 1 1311X2404 12 13228A1609 13318A3727 1341X3783 13528A1649 136822014002 1 4 6 1 AR 1371X4638 6 13822A2772 13918A3733 1 1 R284 DESCRIPTION Rubber Seal Hinge Machine Screw Check Strap Glass Run Channel Glass Assembly Glass Glass Setting Strip Regulator Bottom Channel Weather Strip Machine Screw Machine Screw Hair Pin Clip Push Button Machine Screw Washer Finish Washer Remote Control Assembly Rod Assembly Rod Assembly Inside Latch Assembly Latch Cover Trim Retainer Vinyl Cover Pin Door Handle Window Crank Escutcheon Rubber Seal Kick Plate Grab Handle Machine Screw Door Panel Window Regulator Lockwasher Screw Machine Screw Door Channel Spacer Outside Door Panel Ash Tray Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Bracket Spacer Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/4" X 2" Reservoir Kit Windshield Wiper And Washer Hose, EPDM Type Synthetic Rubber Durometer - Shore A - 68-78, 5/32" I.D. [7’ (2.13m)] Locknut, Hex, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Toe Board Pedal Hole Rubber Gasket M1-71-25.0 (6 of 7) FSCM No. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 36422 86157 36422 36422 90483 36422 24161 72968 36422 36422 TM 10-3950-263-14&P-3 Parts List Carrier Cab - Continued REF. PART NO. R284 QTY. 14018A3487 1411lX624 1 6 142HC2470 14322A2666 144HC70 145 22A2665 14628A1440 1471X4546 2 1 1 1 1 2 1481X1912 14928N1175 15028A1441 151822014001 2 1 1 AR 15228A1650 15328A1945 15419A2450 1551X1766 1 1 1 2 DESCRIPTION M1-71-25.0 FSCM No. Pedal Hole Cover Plate Machine Screw, Round Head, Carbon Steel ASTF1 A307, Zinc Plated, #10 X 1" Stop Bracket Clip Air Vent Control Wiper Arm Capscrew, Hex Head, UNF, Class 2A, Grade 5, Zinc Plated, 1/4" X 3/4" Locknut, Nylon Insert, Hex ASL UNF-3B Thread, 1/4" Pantograph Adaptor Windshield Wiper Blade Windshield Wiper And Washer Hose, EPDM Type Synthetic Rubber Durometer - Shore A - 68-78, 7/64" I.D. [1’ (0.31m) (2 Required)] Nozzle Kit Windshield Wiper Motor Sun Visor Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, 1/4"- 20 X 3/4" M1-71-25.0 (7 of 7) 36422 90483 36422 36422 36422 36422 36422 90483 72968 36422 36422 24151 36422 36422 36422 90483 TM 10-3950-263-14&P-3 Parts List Left Hand Side Panel Sub Assembly M1-71-29.0 NA292-B M1-71-29.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Left Hand Side Panel Sub Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 18A3434 1X5064 3 6 1X3540 6 18A3447 18A2523 RC230 1X3540 8 1 2 4 1X5064 4 5 6 7 18A3732 AC3764 AC3683 AC5493 1X5079 1 2 1 2 2 8 12A1033 1J1193 1X3731 2 2 2 1X5079 2 1X2 810040001 2 AR 1X4736 HC343 18A2364 1X3540 1 1 2 4 1X5064 4 25H173 1X3731 1 2 1X5079 2 1X2 36A2990 1X3731 2 2 2 1X5079 4 14 15 16 17 28A1038 45A688 22A2160 1X4791 2 1 1 7 18 1X4715 1X4716 7 7 2 3 4 9 10 11 12 13 FSCM No. Fuse Block Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #8 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, #8 /X 5/8" Fuse, AGC-10 Decal Terminal Block Machine Screw, Round Head Carbon Steel, ASTM A307, Zinc Plated, #8 X 5/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #8 Rubber Grommet Tee Low Pressure Indicator Capscrew, 1/4" X 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Solenoid Air Valve Tube Clamp Capscrew, Hex Head, UNF-Class-2A - Grade 5, Zinc Plated 1/4" X 5" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Air Brake Tubing, Thermoplastic, Black, Moisture Absorption 0.2% ASTM-D-570 .375 I.D. Elbow, 900 Male Brass, 3/8" X 1/4" Elbow Terminal Block Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #8 X 5/8" Locknut, Hexagon, Low Carbon, Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #8 Circuit Breaker Capscrew, Hex Head, UNF-Class-2A-Grade 5, Zinc Plated, 1/4" X 5" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4H 12 Volt Solenoid Capscrew, Hex Head, UNF-Class-2A-Grade 5, Zinc Plated, 1/4" X 5" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Wire Assembly Fuse AGC-15 Sheet Quarter Turn Steel, Steel Fastner Zinc Plated W/Clear Chromate Finish, .709" Lg. Quarter Turn Stud Retainer, Nylon, Natural Color, .202" Quarter Turn Receptacle, Clip-On Style, Steel, 1" M1-71-29.0 (2 Of 2) 36422 72968 90483 36422 36422 36422 90483 72968 36422 36422 36422 36422 72968 36422 36422 90483 72968 86157 06229 09505 36422 36422 90483 72968 36422 90483 72968 86157 36422 90483 72968 36422 36422 36422 71286 71286 71286 TM 10-3950-263-14&P-3 Parts List Carrier Seat M1-72-12.0 NA312-A REF. 1 2 3 4 5 6 7 8 PART NO. QTY. 22A2124 3A8057 3A8058 3A8059 3A8060 22A1886 3A8064 3A8065 3A8063 3A8062 22A884 1 1 1 3 1 1 1 1 1 1 1 1X2147 1X3808 4 4 1X2573 1X5080 4 4 DESCRIPTION FSCM No. Seat Assembly Seat Cushion Back Cushion Shock, Internal Track W/Handle Seat Base Air Valve Air Hose, Internal Control HO se, Internal Slave Track Seat Belt Label Mounting Hardware As Follows Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/16" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" * See Vendor Annex List For FSCM NO. M1-72-12.0 (1 Of 1 ) 36422 * * * * 36422 * * * * 36422 90483 72968 90483 72968 TM 10-3950-263-14&P-3 Parts List M1-73-21.0 Carrier Cab Dash Assembly NA213-B REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 22A2169 22A2170 22A2171 28A1808 22A2175 28A1817 22A2172 22A2447 22A2451 18A248 28A1651 20R88 17A1205 18A2362 26R2 lX4065 8A1884 22A2168 19A1978 18A4389 HC2273 QTY. 1 1 1 1 1 1 3 1 1 1 1 2 1 1 1 1 2 1 1 1 1 DESCRIPTION Oil Pressure Gauge Water Temperature Gauge Fuel Gauge Tachometer High Beam Electric - Speedometer/Odometer Air Pressure Gauge Dash Plate Dash Decal Control Valve Washer/Wiper Switch Rheostat Switch Plug Button Headlight Switch Cigarette Lighter Lockwasher, External Tooth, Carbon Steel, Type A, 7/8" Flat Washer Voltmeter Throttle Control Cable Ignition Switch Push Switch M1-73-21.0 (1 Of 2) FSCM No. 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 20859 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Carrier Cab Dash Assembly - Continued REF. PART NO. QTY. 19 20 HC2273 18A247 1 1 DESCRIPTION FSCM No. Push Switch Control Valve 36422 36422 M1-73-21.0 (2 Of 2) TM 10-3950-263-14&P-3 Parts List R583 M 1-74-8.0 Bumper Counterweight Assembly REF. 1 2 3 PART NO. QTY. 22A2452 22A2815 51N5322 22A2518 22A2497 1 2 2 DESCRIPTION FSCM No. "A" Bumper Counterweight AR Shim AR Shim Bumper Counterweight Pin W/C Detent Ball Lock Pin M1-74-8.0 (1 Of 1) 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R1283 Revolving Frame M3-1-63.0 (1 of 3) WP2 M3-1-63.0 TM 10-3950-263-14&P-3 Parts List R1283 Revolving Frame - Continued REF. PART NO. QTY. 1 1X111 3 2 1X2523 1 3 4 5 18B19 1X832 1X4062 2 2 15 6 7 8 9 10 11 12 13 14 22B73 22B29 1X830 22B457 1X3734 lX3771 1X2775 1X6 1X3971 1 1 1 1 3 7 6 27 8 15 16 1X4 LX3808 14 26 17 18 19 20 21 1X3735 22B529 22B363 22B364 22B361 1X4513 3 1 AR AR 1 7 22 23 24 25 26 1X1402 22B468 lX3718 22B676 1X3809 7 1 6 1 6 27 28 22B353 1X4148 2 8 29 30 31 32 33 34 35 36 37 38 39 22B359 22B360 22B169 1X3303 1X3256 22B527 22B419 LX3302 1X3599 22B12 CC397 lX5161 AR AR 1 4 4 1 1 3 2 1 1 45 40 17A1l457 4 DESCRIPTION Locknut, Nylon Insert, Hexagon, Low Carbon Steel, UNS-3B Thread, Rockwell C32, Zinc Plated, Grade 5, 1" Capscrew, Hex Head, UNS Class 2A, Grade 5, Zinc Plated 1" x 5" Bolt36422 Square Head Pipe Plug, Steel, 1-1/4" (Drain & Fill) Locking Capscrew, Hex Head, N.C. UNC Class 2A, Grade 5, 3/8" x 3/4" Bevel Gear Case Cover Gasket Square Head Pipe Plug, Steel, 3/4" (Check) Revolving Frame Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" x 3-1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/4" x 3-1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" x 2-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locking Capscrew, Hex Head, N.C. UNC Class 2A, Grade 5, 3/8" x 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, UNC-3B, 1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 2-1/2" Platform Shim, 3/4" Shim, 1" Platform Support Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, UNC-3B, 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/4" Angle Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" x 1-3/4" Support Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, UNC-3B, 3/8" Cover Locking Capscrew, Hex Head, N.C. UNC Class 2A, Grade 5, 3/8" x 1" Shim, 1" Shim, 3/4" Angle Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" x 2-3/4" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" x 2-1/2" Platform Cover Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" x 1-1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" x 1-1/4" Bearing Support 0 Grease Fitting, 1/8", 30 , Steel, Ball Check At Top Capscrew, Hex Head, UNC Class 2A, Grade 8, Steel, 1-1/2" x 8" Male Connector, Flareless, Brass, Natural, 1/4" x 1/4" M3-1-63.0 (2 of 3) FSCM No. 72968 90483 09505 72968 36422 36422 09505 36422 90483 90483 90483 86157 72968 86157 72968 90483 36422 36422 36422 36422 72968 86157 36422 90483 36422 72968 36422 90483 36422 36422 36422 90483 90483 36422 36422 90483 90483 36422 78385 90483 09505 TM 10-3950-263-14&P-3 Parts List R1283 Revolving Frame - Continued REF. PART NO. QTY. 41 963002009 AR 42 43 1X1135 1X812 4 2 44 45 22B437 1X4342 1 28 DESCRIPTION M3-1-63.0 FSCM No. Round Tubing, 0.18% Maximum Carbon, Electric-ResistanceWelded, Cold Drawn And Annealed, SAE J525, 1/4" O.D. x 0.028" Wall x 22" (4 Required) Male Connector, Flareless, Brass, Natural, 1/4" x 1/8" Grease Fitting, 1/8", 90, Steel, Bright Zinc Plated, Ball Check At Tap Turntable Bearing Capscrew, Hex Head, UNC Class 2A, Grade 8, Steel, 1-1/2" x 9" M3-1-63.0 (3 of 3) 96593 09505 78385 36422 90483 TM 10-3950-263-14&P-3 Parts List M3-2-15.0 Operator’s Seat And Mounting M3-2-15.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List REF. 1 2 3 4 5 6 7 8 9 10 PART NO. 22N974 3N34 3N37 3P208 3N33 3N35 3N36 3N31 3N32 3N38 1X2573 1X5080 11 12 13 3N39 22N1363 1X2760 14 1X4 1X4062 15 16 22N1395 22N1396 1X2574 1X4 1X3809 QTY. DESCRIPTION FSCM No. 1 Operator’s Seat 1 Head Rest 1 Pad 1 Knob * 1 Back Rest (Cover Only) 1 Control Track 1 Free Track 1 Riser Assembly 1 Seat Cushion (Cover Only) 1 Tension Spring 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/16" X 1" 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" 1 Tension Spring 1 Cover 3 Hex Head, Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, 3/8" X 3/4" 3 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" 6 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" 1 Bracket (Right Side) 1 Bracket (Left Side) 3 Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" 3 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" 3 Locknut, Hexagon, Low Carbon Steel Zinc Plated, Rockwell C32, Nylon Insert, UNC - 3B, 3/8" * See Vendor Annex List M3-2-15.0 (2 Of 2) 36422 * * * * * * * * 90483 72968 36422 36422 90483 86157 72968 36422 36422 90483 86157 72968 TM 10-3950-263-14&P-3 Parts List M3-6-33.0 Swing Lock Control M3-6-33.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List Swing Lock - Continued REF. PART NO. QTY. 1 18J27 1 2 22J470 1 3 1X688 1 1X183 1 4 5 6 22J432 1X199 lX2458 1 1 1 7 8 9 10 11 22J469 18J37 22J444 22J443 JC22 LX1086 1X688 1 1 1 1 3 3 1 1X183 1 13 1X177 1 14 15 19 18J36 9F96 8J491 1X1097 18J33 9F96 8J491 1X1097 18J34 18J35 18J240 1X4148 1 1 AR 1 2 1 AR 1 1 AR AR 2 20 21 22 23 lX3896 22J1629 1X812 1X3226 2 1 1 1 DC453 1X184 2 1 22J441 JC646 1X198 22J917 1X196 1 2 3 1 1 12 16 17 18 24 25 26 27 28 29 DESCRIPTION Pawl 36422 Pin 36422 Hex Socket Set Screw, Half Dog Point, NC-3 Threads, Heat Treated Alloy Steel, Natural, 1/2" X 1-1/4" Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1/2" Swing Lock Housing Hexagon Jam Nut, 3/4" UNF-2B, Steel, Zinc Plated, Capscrew, Hex Head, UNF-Class 2A- Grade 5, Zinc Plated, 3/4" X 2-1/4" Pin Lever Clevis Threaded Rod Pin, Yoke Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Hex Socket Set Screw, Half Dog Point, NC-3 Threads Alloy Steel, Natural, 1/2" X 1-1/4" Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc 90483 Plated, 1/2" Finished Hex Nut, American Standard, Fine Thread, Carbon Steel, 1-1/2" Bolt Pin Shim, 12 Gauge Cotter Pin, Extended Prong, Square Cut, 1/4" X 1-3/4" Link Pin Shim, 12 Gauge Cotter Pin, Extended Prong, Square Cut, 1/4" X 1-3/4" Bracket Shim, 14 Gauge Shim, 18 Gauge Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" X 1" Capscrew, Hex Head, UNC Class-2A - Grade 5, 5/8" X 1-1/2" Bracket Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short Hex Socket Head Shoulder Screw, Stripper Bolts, NC-3 Threads, Alloy Steel, 3/4" X 1-1/2" Bearing Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 5/8" Lever Clevis Hexagon Jam Nut, 5/8" UNF-2B, Steel, Zinc Plated Threaded Rod Hexagon Jam Nut, 1/2" UNF-2B, Steel, Zinc Plated See Master Clutch Swing Brake And Lock Controls M7-9-37.0 M3-6-33.0 (2 Of 2) FSCM No. 90483 90483 36422 90483 90483 36422 36422 36422 36422 36422 20859 90483 90483 36422 36422 36422 20859 36422 36422 36422 20859 36422 36422 36422 72968 90483 36422 20859 90483 36422 90483 36422 36422 90483 36422 90483 TM 10-3950-263-14&P-3 Parts List R482 "AB" Counterweight And Removal Assembly M3-10-74.0 (1 Of 3) M3-10-74.0 TM 10-3950-263-14&P-3 Parts List R482 “AB” REF. 1 Counterweight And Removal Assembly - Continued PART NO. QTY. DESCRIPTION 1X3918 16 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" 1X6 16 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" 2 18B157 2 Plate 3 22B498 1 Removable Counterweight "A" 30,000# (67,200 Kg.) 4 18B162 1 Screw Block 5 18B477 2 Adjusting Screw 6 18B119 2 Arm Lever 7 lX812 8 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short 8 18B86 4 Pin 9 18B70 2 Plate 10 18B81 4 Plate 11 1X3918 8 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" 1X4 8 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 12 18B191 2 Setscrew 1X187 2 Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1" 13 18B87 2 Pin 14 18B71 2 Link 15 1X2611 2 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3-1/2" 1X98 2 Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Rockwell C32 Maximum, Zinc Plated, 3/8" 16 Counterweight Cylinder, See M3-10-75.0 17 22J1756 2 Pin 18 lX596 4 Setscrew, Square Head, Cup Point, Coarse Thread, Carbon Steel Case Hardened, 1/2" X 2" 1X183 4 Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1/2" 19 18B116 4 Bar 18B111 AR Shim, 1/4" 18B113 AR Shim, 16 Ga. 20 18B481 2 Plate 21 188114 2 Cover Plate 22 1X4019 8 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 2" 1X6 8 Plain Washer, Hot Rolled, Mild Steel Zinc Plated, 1/2" 23 18B115 4 Bar 24 18B76 2 Pin 25 1X487 4 Setscrew, Hex Socket, Cup Point, NC-3 Threads, HeatTreated Alloy Steel, 3/8" X 3/4" M3-10-74.0 (2 Of 3) FSCM No. 72968 86157 36422 36422 36422 36422 36422 78385 36422 36422 36422 72968 86157 36422 90483 36422 36422 90483 72968 36422 90483 90483 36422 36422 36422 36422 36422 72968 86157 36422 36422 90483 TM 10-3950-263-14&P-3 Parts List R482 M3-10-74.0 "AB" Counterweight And Removal Assembly - Continued REF. 26 27 28 29 30 PART NO. 22B506 BC1240 1X1103 18B268 1X5404 QTY. 2 2 2 2 2 1X23 22B501 22B504 BC1240 1X1103 22B507 2 1 2 2 2 2 DESCRIPTION Pin 36422 Spacer 36422 Cotter Pin, Extended Prong, Square Cut, 5/16" X 3" Counterweight Connecting Link Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32 Nylon Insert, UNC-3B, 1-1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1-1/2" Upper Counterweight "B" 30,000# (67,200 Kg.) Pin Spacer Cotter Pin, Extended Prong, Square Cut, 5/16" X 3" T-Handle M3-10-74.0 (3 Of 3 ) FSCM No. 20859 36422 72968 86157 36422 36422 36422 20859 36422 TM 10-3950-263-14&P-3 Parts List M3-10-75.0 Counterweight Removal Cylinder REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 22J1754 18J1026 22J1753 18J1032 22A457 * 22A458 * 18J1029 25V386 * 25V388 * SM477* 25C48* 18J1031 18J1067* 1X4137 18J1030 12A2027 13D145 1X4105 1K302 * 18J1068* 1X4136 QTY. 1 1 1 1 2 1 1 2 2 1 2 1 1 1 1 4 4 4 1 1 1 DESCRIPTION Cylinder Assembly* Included in 3X260 Cylinder Body Seal Kit End Cap Piston Washer Back-Up "O" Ring Piston Rod "0" Ring36422 Back-Up Ring "O" Ring Back-Up Ring Gland Rod Wiper Seal Rollpin, Carbon Steel, 3/16" X 2-1/4" Rod End Hex Bolt Serrated Safety Spring Washer Hex Nut, Heavy Semi-Finished, Steel, UNF-2B, 3/4" "O" Ring Back-Up Ring Locknut, Carbon Steel, Nylon Insert, UNC-3A, 1-3/4" M3-10-75.0 (1 Of 1) FSCM No. 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 36422 36422 36422 90483 36422 36422 72968 TM 10-3950-263-14&P-3 Parts List M3-10-82.0 Counterweight Removal Lines M3-10-82.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Counterweight Removal Lines - Continued REF. PART NO. QTY. DESCRIPTION 1 22J1754 2 Counterweight Cylinder (See Keysheet M3-10-75.0) 2 1J1189 2 Elbow 3 1X1152 2 Male Connector, 730 Flare, Steel, 1/2" X 3/8" 4 1X2802 2 900 Swivel Nut Elbow, 370 Flare, Steel, 1/2" X 3/4" -16 5 28J596 1 Hose Assembly 6 28J599 1 Hose Assembly 7 22J1759 1 Control Valve (See Keysheet M7-8-198.0) 8 18J64 2 Needle Valve 9 1X3668 1 90° Straight Thread Elbow, Steel W/Locknut Washer And "O" Ring, 3/4" X 1-1/16" 1X2816 1 Reducer - Tube End, 370 Flare, Steel, 3/4" X 1/2" 1X2690 1 Tube Nut, 370 Flare, Steel, Zinc Plated, 3/4" 10 1X2802 1 900 Swivel Nut Elbow, 37° Flare, Steel, 1/2" X 3/4" -16 1X3225 1 Connector, Straight Thread, Steel, Zinc Plated, W/O Ring, 1/2" X 7/8" -14 11 1X2802 1 90° Swivel Nut Elbow, 370 Flare, Steel, 1/2" X 3/4" -16 1X2952 1 Connector, Straight Thread, Steel, Zinc Plated, W/O Ring, 1/2" X 1-1/16" -12 12 1J1200 1 Hose Assembly 13 1X1173 1 90° Male Elbow, 37° Flare, Steel, 1/2" X 1/4" 14 1A3692 1 Bar 15 1X1128 2 Connector - Male, 370 Flare, Steel, 1/2" X 1/4" 16 1X2810 2 900 Straight Thread Elbow, Steel W/Locknut Washer And "O" Ring, 1/2" X 3/4" -16 17 31J2363 1 Oil Filter (See Keysheet M7-2-29.0) 18 9J198 1 Hose Assembly 19 lX1180 1 90° Male Elbow, 370 Flare, Steel, 1/2" X 1/2" 20 1J3840 1 Hose Assembly 21 1X3757 3 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 2" 1X4 3 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" 1X3809 3 Locknut, Hexagon Low Carbon Steel, Zinc Plated, Rockwell C32 Nylon Insert, UNC 38, 3/8" 22 28J1240 1 Hose Assembly 23 39J409 2 Hose Assembly 24 1X1149 1 Union Tee, 37° Flare, Steel, Zinc Plated, 1/2" 25 1X1157 1 Union - 37° Flare, Steel, Zinc Plated, 1/2" 26 38J520 2 Hose Assembly 27 22J1756 2 Pin 12C56 2 Rod End 1X3968 2 Locking Capscrew, Hex Head, UNC lass 2A, Grade 5, 5/16" X 3/4" 1X1800 4 Grease Fitting, 1/8" X 90°, Steel M3-10-82.0 (2 Of 2) FSCM No. 36422 36422 09505 09505 36422 36422 36422 36422 09505 09505 09505 09505 09505 09505 09505 36422 09505 09505 36422 09505 36422 36422 09505 36422 90483 86157 72968 36422 36422 09505 09505 36422 36422 36422 72968 78385 TM 10-3950-263-14&P-3 Parts List M3-10-89.0 Counterweight Assembly M3-10-89.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List Counterweight Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 1X163 2 Nut, Finished Hexagon, Carbon Steel, American Standard, UNC-2B, 2" 2 22B656 AR Spacer 3 22B654 1 "A" Counterweight, 30,000# (13608kg) 4 22B657 AR Shim 22B658 AR Shim, 1/4" 22B659 AR Shim, 1/2" 5 22B655 2 Adjusting Screw 6 18B119 2 Lever Arm 7 18B86 4 Pin 8 18B481 2 Plate 9 18B81 4 Plate 10 lX3918 8 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" 1X4 8 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 11 18B191 2 Set Screw 1X187 2 Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1" 12 1X812 8 Grease Fitting, 1/8" - 27 Dryseal PTF - SAE Short 13 18B87 2 Pin 14 18B71 2 Link 15 1X2611 2 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3-1/2" 16 1X98 2 Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Rockwell C32 Maximum, Zinc Plated, 3/8" 17 2 Counterweight Cylinder, See M3-10-75.0 18 22J1756 2 Pin 19 1X596 4 Setscrew, Square Head, Cup Point, Coarse Thread, Carbon Steel Case Hardened, 1/2" X 2" 1X183 4 Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 1/2" 20 18B76 2 Pin 21 18B115 4 Bar 22 18l81 AR Shim, 1/4" 18B113 AR Shim, 16 Ga. 23 18B70 2 Plate 24 18B114 2 Plate 25 lX4019 8 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 2" 1X6 8 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" 26 1X487 4 Setscrew; Hex Socket, Cup Point, NC-3 Threads, Heat-Treated Alloy Steel, 3/8" X 3/4" M3-10-89.0 (2 Of 3) FSCM No. 90483 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 72968 86157 36422 90483 78375 36422 36422 78385 90483 36422 90483 72968 36422 36422 36422 36422 36422 36422 90483 86157 90483 TM 10-3950-263-14&P-3 Parts List M3-10-89.0 Counterweight Assembly - Continued REF. 27 28 29 30 31 32 PART NO. 22B506 18B686 1X1103 22B501 18B268 1X5404 QTY. 2 2 2 1 2 2 1X23 22B504 18B686 1X1103 22B507 2 2 2 2 1 DESCRIPTION FSCM No. Pin 36422 Spacer 36422 Cotter Pin, Extended Prong, Square Cut, 5/16" X 3" "B" Counterweight, 30,000# (13608gk) Connecting Link Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylin Insert, UNC-3B, 1-1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1-1/2" Pin Spacer Cotter Pin, Extended Prong, Square Cut, 5/16" X 3" "T" Handle M3-10-89.0 (3 Of 3) 20859 36422 36422 72968 86157 36422 36422 20859 36422 TM 10-3950-263-14&P-3 Parts List R883 Upper Grease Lines M3-11-12.0 (1 Of 2 ) M3-11-12.0 TM 10-3950-263-14&P-3 Parts List R883 Upper Grease Lines - Continued REF. PART NO. QTY. DESCRIPTION 1 Grease Lines - Left Side 1 1X1135 25 Male Connector, Flareless, Brass, Natural, 1/4" X 1/8" 2 JC845 2 Elbow 3 AC82 1 Elbow 4 JC845 1 Elbow 5 22D112 1 Grease Line 6 22B317 1 Grease Line 7 22B315 1 Grease Line - Turntable Bearing 8 1A4683 1 Grease Line - Turntable Bearing 9 28B358 1 Manifold 10 1X812 2 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short 11 1X812 2 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short - For Turntable Bearing 12 18B275 1 Manifold 13 lX812 1 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short 14 JC2630 2 Tube Clamp SR885 2 Mounting Lug 1X622 2 Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 1/2" 1X1267 2 Lockwasher, External Tooth, Carbon Steel, Type A, #10 15 28C105 1 Grease Line- Boom Hoist 16 22Cl116 1 Grease Line - Lower Reduction Shaft 17 HC196 1 Elbow 18 36R33 1 Grease Line - Lower Reduction Shaft 19 AC82 1 Elbow 20 1D41 1 Hose 21 JC845 1 Elbow Grease Lines - Right Side 22 22E24 1 Grease Line, Boom Hoist 23 22B175 1 Manifold 24 1X812 3 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short 25 22C66 1 Grease Line - Lower Reduction Shaft 26 HC196 1 Elbow 27 1A2389 1 Breather Cap 28 22C67 1 Grease Line - Upper Reduction Shaft 29 JC2630 2 Tube Clamp 1X622 1 Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 1/2" 1X1267 1 Lockwasher, External Tooth, Carbon Steel, Type A, #10 M3-11-12.0 (2 Of 2) FSCM No. 09505 36422 36422 36422 36422 36422 36422 36422 36422 78385 78385 36422 78385 36422 36422 90483 20859 36422 36422 36422 36422 36422 36422 36422 36422 36422 78385 36422 36422 36422 36422 36422 90483 20859 TM 10-3950-263-14&P-3 Parts List M3-12-25.0 16 Part Bail REF. . 1 PART NO. QTY. 6 7 VT124 1X1093 1X812 22K50 22M370 22M88 1X1093 1X2386 1X2742 2 4 8 1 2 2 4 2 12 8 1X1828 12 9 10 22K2 lX4148 6 4 1X6 22K46 22K47 22K15 22K4 22K3 4 1 1 1 1 2 2 3 4 5 11 12 13 DESCRIPTION FSCM No. Pin 36422 Cotter Pin, Extended Prong, Square Cut, 3/16" X 1-1/2" Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short Bail Shaft Spacer Pin Cotter Pin, Extended Pronq, Square Cut, 3/16" X 1-1/2" Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short Snap Ring, Internal, Carbon Spring Steel, Phosphate Coated, 7" Ball Bearing, Single Row Shield One Side, Ring And Balls - High Carbon Chromium Steel, Caqe And ShieldLow Carbon Steel, 4.7244 I.D. X 7.0866 O.D. X 1.1024 Sheave Locking Capscrew, Hex Head, N.C. UNC Class 2A-Grade 5, 1/2" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Right Hand Bracket Left Hand Bracket Bail Assembly Bail Frame Bushing M3-12-25.0(1 of 2) 20859 78385 36422 36422 36422 20859 78385 79136 91936 36422 72968 86157 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List 16 Part Bail - Continued REF. PART NO. QTY. 1X1717 4 14 15 1M2880 1X2574 1X28 1 2 2 16 17 22K10O lX1828 1 2 18 22Y8 1X1098 1X826 1X2742 1 1 1 2 9E17 1X812 22K2 9Y68 1Y101 22K22 2 1 1 1 1 1 19 20 21 22 23 24 25 DESCRIPTION Unbrako Set Screw, Hex Socket, Knurled Cup Point NC-3, Threads, Heat Treated Alloy Steel Natural, 3/8" X 1/2" Lock Plate Capscrew, Hex Head, UNC Class 2A- Grade, 5, 3/8" X 1" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Shaft Ball Bearing, Single Row Shield One Side, Ring And Balls - High Caron Chromium Steel, Cage And Shield Low Carbon Steel, 4.7244 I.D. X 7.0866 O.D. X 1.1024 Pin Cotter Pin, Extended Prong, Square Cut, 1/4" X 2" Square Head Pipe Plug, Steel, 1/8" Snap Ring, Internal, Carbon Spring Steel Phosphate Coated, 7" Shim, 16 Gauge Grease Fitting, 1/8" -26 Dryseal PTF-SAE Short Sheave Socket Wedge Deflector Roller M3-12-25.0 (2 Of 2) FSCM No. 90483 36422 90483 20859 36422 91936 36422 20859’ 09505 79136 36422 78385 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List M3-14-15.0 Fuel Tank And Lines REF. PART NO. QTY. 1 2 20J2965 810001016 2 AR 3 4 5 22H294 1X4 1X3769 1X3809 1 12 1 1 1X4 lX3809 2 2 1X4 22H290 HC28 1X3809 2 2 8 8 1X4 HB213 1X1174 22H311 1X5255 8 1 1 1 2 6 7 8 9 10 11 DESCRIPTION FSCM No. Elbow Tubing, Nylon II, Flexible, Low Pressure, Extremely Low Moisture Absorption, .376 I.D. Bracket Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 5" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8H Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Rubber Pad Rubber Pad Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Pipe Fitting 900 Male Elbow, 370 Flare, Steel, 5/8" X 1/2" Hose Assembly Insulated Clamp, Steel, 1/32" Black Neoprene Insulation, 15/16" M3-14-15.0 (1 Of 2 ) 36422 06229 36422 86157 90483 72968 86157 72968 86157 36422 36422 72968 86157 36422 09505 36422 30966 TM 10-3950-263-14&P-3 Parts List Fuel Tank And Lines (GM6V-71) - Continued REF. PART NO. QTY. DESCRIPTION 12 1X3717 1 Capscrew, Hex Head, UNC-Glass-2A-Grade 5, Zinc Plated, 3/8" X 3/4" 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, 3/8" , 13 1X830 1 Pipe Plug, Square Head, Steel, 3/4" 14 22H310 1 Hose Assembly 15 lX1166 1 Female Elbow, 90°, 370 Flare, Steel 16 1X857 1 Reducer Coupling, Malleable Iron, Black, 1/2" X 1/4" 17 JM124 1 Coupling 18 lX2296 1 Male Adapter Union, Straight, Steel, 3/8" Male X 1/2" Female 19 1X1911 1 90° Street Elbow, Steel, 3/8" 20 22H280 1 Fuel Tank 21 1X828 1 Pipe Plug, Square Head, Steel, 3/8" 22 22H49 1 Flame Arrestor And Fill Unit 23 12A2529 1 Fuel Label M3-14-15.0 (A Of 2) FSCM No. 90483 09505 36422 09505 09505 36422 09505 09505 36422 09505 36422 36422 TM 10-3950-263-14&P-3 Parts List Vertical Swing Shaft REF. 1 2 3 4 PART NO. 1X3336 1X3335 22F5 1X3799 QTY. 1 1 AR 1 5 6 7 GC196 22F9 1X2066 1 1 1 8 9 22F10 1X3447 1 1 10 11 12 13 22F2 GC196 AC98 18D6 1X30 1 1 1 2 2 14 15 22F6 1X812 1 1 R284 DESCRIPTION Locknut, Shaft Type AN-18, Low Carbon Steel Lockwasher, Shaft Type W-18, Low Carbon Steel Shims - Case Harden Bearing, Ball, Single Row 4.1339 ID X 8.8583 O.D. X 1.9291 Shield One Side, Type BL Medium Series Snap Ring Seal Retainer Oil Seal, Case-Low Carbon Steel, Sealing Lip-Synthetic Rubber, Garter Sprinq-Sprinq Steel, 4-3/4" X 5.756 X 9/16" Spacer Cylindrical Roller Bearing, AFBMA Type RM, Single Row, Series 32, Rings & Rollers - High Carbon Chromium Steel, Cage-Low Carbon Steel, 4.1339 X 7.3803 X 2.5625 Grease Retainer Snap Rind End Plate Capscrew, Drilled Head, 1/2" X 1-1/4" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" Swing Pinion Grease Fitting, 1/8" 27 Dryseal PTF-SAE Short M4-3-31.0(1 of 2) M4-3-31.0 FSCM No. 72968 20859 36422 91936 36422 36422 80201 36422 19382 36422 36422 36422 36422 20859 36422 78385 TM 10-3950-263-14&P-3 Parts List REF. Vertical SwInq Shaft - Continued PART NO. QTY. DESCRIPTION 16 22F4 1X3554 1 1 17 22F7 1 FSCM No. Shaft With Wear Sleeve Wear Sleeve, AISI CRCO. 15% Carbon Maximum 4.625 Shaft Dia. X 4.750" O.D. X .750 Bevel Gear 36422 M4-3-31.0(2 of 2) 36422 80201 TM 10-3950-263-14&P-3 M5-1-51.1 Parts List Swing Lines And Fittings M5-1-51.1(1 OF 2) TM 10-3950-263-14&P-3 Parts List REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 R284 Swing Lines And Fittings - Continued PART NO. QTY. DESCRIPTION Clutch Rotating Joint, See M5-9-25.0 1X1152 2 Male Connector, 370 Flare, Steel, 1/2" X 3/8" 18J172 1 Tube Assembly lX1157 9 Union, 370 Flare, Steel, 1/2" JC2987 2 Bracket JC2279 2 Tube Clamp 22J82 1 Tube Assembly 32J340 1 Tube Assembly AA562 2 Bracket JC2279 2 Tube Clamp 1X4705 2 Locking Capscrew, Hex Head, UNC Class 2A, 1/4" X 1/2" 1X2359 1 Elbow, Male Extra Long, 370 Flare, Steel, Zinc Plated, 1/2" 22J589 1 Tube Assembly AA562 1 Bracket JC2279 1 Tube Clamp 1X2574 1 Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert UNC-3B, 1/2" 22J646 1 Tube Assembly 37° 1X1162 3 Elbow, Union 900, Flare, Steel, Zinc Plated, 1/2" 22J579 1 Tube Assembly 22J585 1 Tube Assembly 32J340 1 Tube Assembly 18J312 1 Tube Assembly 1J2072 1 Tube Assembly 32J940 1 Tube Assembly, Top 9J228 1 Tube Assembly, Bottom 22J613 1 Tube Assembly 16A414 1 Bulkhead Elbow 22J611 1 Tube Assembly 28J587 2 Bulkhead Union 22J617 1 Tube Assembly 28J560 3 Hose Assembly M5-1-51.1(2 OF 2) FSCM No. 09505 36422 09505 36422 36422 36422 36422 36422 36422 72968 09505 36422 36422 36422 90483 72968 36422 99505 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-1-54.0 Parts List SwInq Reverse Shaft M5-1-54.0 (1 OF 2) TM 10-3950-263-14&P-3 Parts List REF. 1 2 3 R284 Swing Reverse Shaft PART NO. QTY. 18D6 4 CB14 2 1X11O 12 4 5 22C8 1X3446 2 2 6 1X2284 4 7 1X2626 4 8 9 10 22D11 22E5 1X3388 2 2 12 11 12 22D12 22C26 1X2649 2 AR 2 13 1X1978 2 14 22C21 22C26 22C20 12T21 22C29 12H49 22C23 22C27 22D12 1 AR 1 3 1 1 1 1 1 15 16 17 18 19 20 21 DESCRIPTION Capscrew End Cap Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNF-3B, 7/8" Clutch Drum Oil Seal, Case, Low Carbon Steel, Sealing Lip-Synthetic Rubber, Garter Spring-Spring Steel, 6.000" I.D. X 7.508" O.D. X 9/16" Ball Bearing, Single Row, Radial, Rings And Balls-High Carbon Chromium Steel, Cage-Low Carbon Steel, 4.307 I.D. X 6.6929 O.D. X 1.1024 Retaining Ring, Internal, Carbon Spring Steel, 6-5/8" Housing Dia. Spacer Spur Gear Capscrew, Hex Head, UNF-Class 2A-Grade 5, Zinc Plated, 7/8" X 3-3/4" Spacer Shim, 22 Ga Retaining Ring, Internal, Carbon Spring Steel, 7-3/4" Housing Dia. Ball Bearing, Single Row Radial, Shield One Side, Ring And Balls-High Carbon Chromium Steel, Cage And ShieldLow Carbon Steel, 4.3307 I.D. X 7.8740 O.D. X 1.4961 Spacer Shim, 22 Ga Bevel Gear 36422 External Snap Ring Split Oil Seal Hydroid Washer Brake Drum Swing Reverse Shaft Spacer M5-1-54.0 (2 Of 2) FSCM No. 36422 36422 72968 36422 80201 91936 79136 36422 36422 90483 36422 36422 79136 91936 36422 36422 36422 36422 36422 36422 36422 36422 Parts List Reduction Shafts R883 TM 10-3950-263-14&P-3 M5-2-43.0 NA381-C M5-2-43.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List R883 Reduction Shafts - Continued REF. PART NO. QTY. 1 22C102 1 2 22C61 1 3 1X1982 1 4 5 6 GC196 22H478 22C147 1X2956 1 1 1 1 7 lX2152 1 8 9 22C32 1X3967 1 1 10 11 12 22C123 20J1050 1X1982 1 1 1 13 14 15 16 17 18 19 22C38 DC11 18D6 22C121 1X830 1X935 22C117 lX3968 1 1 2 1 1 1 1 17 20 21 22 1X2403 1A2389 lX830 lX3193 17 1 1 1 23 24 25 26 18C39 22C82 22C120 1X3997 1 1 1 3 27 28 29 1X4 HC196 22C66 1X75 3 2 1 3 30 31 32 22C62 22C41 lX2303 1 1 2 DESCRIPTION Upper Reduction Shaft Grease Retainer Ball Bearing, Single Row, Deep Groove Radial AFBMA Type BC, Medium Series, Shield One Side, Rings And Balls High Carbon Chromium Steel, Cage And Shield - Low Carbon Steel, 3.5433" I.D. X 7.4803" O.D. X 1.6929" Snap Ring - Internal Hydroid Washer Chain Sprocket Wear Sleeve, AISI CRCQ .15% Carbon Maximum, 4.875" Shaft Dia., X 5.00" O.D. X .750" Retaining Ring, External, Carbon Spring Steel, Phosphate Coated, 3-5/32" Shaft Dia. Gear (16 Teeth) Oil Seal, Case - Low Carbon Steel, Sealing Lip - Synthetic Rubber, Garter Spring - Spring Steel, 6-1/8" X 7.508" X 9/16" Retainer "O"-Ring Ball Bearing, Single Row, Deep Groove Radial, AFBMA Type BC, Medium Series, Shield One Side, Rings And Balls - High Carbon Chromium Steel, Cage And Shield - Low Carbon Steel, 3.5433" I.D. X 7.4803" O.D. X 1.6929" Gear (16 Teeth) End Cap Capscrew Gasket Pipe Plug, Square Head, Steel, 3/4" Street Elbow, 45° Malleable Iron, Black 3/4" Gear Case Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/16" X 3/4" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 5/16" Breather Cap Pipe Plug, Square Head, Steel, 3/4" Wear Sleeve, AISI, CRCQ .15% Carbon Maximum, 3.875" Shaft Dia. X 4.00" O.D. X .625" Split Seal Gasket Retainer Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, Medium Carbon Steel, Zinc Plated, Plastic Patch 3/8" X 1-1/2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Elbow Grease Line Retaining Ring, Internal Carbon Spring Steel, 6-3/4" Shaft Dia. "O"-Ring Grease Retainer Ball Bearing, Single Row, Deep Groove Radial, AFBMA Type BC, Medium Series, Shield One Side, Rings And Balls - High Carbon Chromium Steel, Cage And Shield - Low Carbon Steel, M5-2-43.0 (2 Of 3) FSCM No. 36422 36422 91936 36422 36422 36422 80201 79136 36422 80201 36422 36422 91936 36422 36422 36422 36422 09505 09505 36422 72968 86157 36422 09505 80201 36422 36422 36422 72968 86157 36422 36422 79136 36422 36422 91936 Parts List R883 Reduction Shafts - Continued REF. PART NO. QTY. 33 34 35 22C31 1X830 22C128 1X3193 1 1 1 1 36 37 38 39 40 36R33 lX1135 22C42 22C30 CC14 1 2 1 1 1 TM 10-3950-263-14&P-3 M5-2-43.0 DESCRIPTION FSCM No. 3.1496" I.D. X 6.6929" O.D. X 1.5354" Gear (22 Teeth) Pipe Plug, Square Head, Steel, 3/4" Lower Reduction Shaft W/Wear Sleeve Wear Sleeve, AISI CRCQ .15% Carbon Maximum, 3.875" Shaft Dia. X 4.00" O.D. X .625" Grease Line Male Connector, Flareless, Brass, Natural, 1/4" X 1/8" Grease Retainer Gear (22 Teeth) Snap Ring M5-2-43.0 (3 Of 3) 09505 36422 80201 36422 09505 36422 36422 36422 TM 10-3950-263-14&P-3 M5-3-26.0 Parts List Front Drum Shaft Assembly NA352-C M5-3-26.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List REF. R284 Front Drum Shaft Assembly - Continued PART NO. QTY. DESCRIPTION 1 1X11O 12 2 3 4 18D6 CB14 22C8 1X3446 4 2 2 2 6 1X2284 4 7 1X2626 4 8 9 10 22D11 22D5 1X3601 2 2 12 11 12 22D12 22C26 1X2649 2 AR 2 13 lX1978 2 14 15 16 17 18 19 22D14 22D20 12H49 22Y1 22D202 22D8 1 1 1 1 1 1 5 FSCM No. Locknut, Nylon Insert, National UNF-3B, Thread, Grade 5 Low Carbon Steel, Rockwell C32, 7/8" Capscrew End Cap Clutch Drum Oil Seal, Case - Low Carbon Steel, Sealing Lip Synthetic Rubber, Garter Spring - Spring Steel, 6" I.D. X 7.508" O.D. X 9/16" Ball Bearing, Single Row, Radial, Ring And Balls - High Carbon Chromium Steel, Cage - Low Carbon Steel, 4.3307 I.D. X 6.6929 X 1.1024 Snap Ring, Internal, Carbon Spring Steel, Phosphate Coated, 6-5/8" Spacer Spur Gear Capscrew, Hex Head, UNF-Class 2A, Grade 5, Zinc Plated, 7/8" X 3-3/4" Spacer Shim, 22 Gauge Snap Ring, Internal, Carbon Spring, Steel, Phosphate Coated, 7-3/4" Ball Bearing, Single Row, Radial, Shield One Side, Rings And Balls - High Carbon Chromium Steel, Cage And Shield Low Carbon Steel 4.3307 I.D. X 7.8740 O.D. X 1.4961 Spacer Brake Drum Hydroid Washer Wedge, 7/8" Rope Drum Front Drum Shaft M5-3-26.0 (2 Of 2) 72968 36422 36422 36422 80201 91936 79136 36422 36422 90483 36422 36422 79163 91936 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-3-45.1 Parts List Front Drum Lines NA361 -D M5-3-45.1(1 of 2) TM 10-3950-263-14&P-3 Parts List Front Drum Lines - Continued REF. PART NO. QTY. 1 2 3 lX1162 3 1X4304 1 28J587 22J629 22J631 18J1388 1X6038 1X3717 1 1 1 1 1 1 1X3599 1 1X3809 2 8 9 22J641 JC2987 JC2279 1X4062 1 1 1 1 10 11 lX1157 JC2987 JC2279 lX1152 18J146 22J875 28J560 22J599 22J86 22J1112 3 3 3 "2 1 1 2 1 1 1 4 5 6 7 12 13 14 15 16 17 18 DESCRIPTION FSCM No. 37° Elbow, Union 90°, Flare, Steel, Zinc Plated, 1/2" Clutch Rotating Joint, See Keysheet M5-9-25.0 Bulkhead Union, 370 Flared Ends, Body With Locknut Only, Steel, Cadium Plated, 1/2" Bulkhead Union Tube Assembly Tube Assembly Bracket 36422 Tube Clamp, Aluminum, Neoprene Cushioned, 1/2" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Locknut, Hexagon, Low Carbon Steel Zinc Plated, Rockwell C32, Nylon Insert UNC-3B, 1/2" Tube Assembly Bracket Tube Clamp Locking Capscrew, Hex Head, UNC Class 2A, 3/8" X 3/4" 37° Union, Flare, Steel, 1/2" Bracket Tube Clamp 37° Male Connector, Flare, Steel, 1/2" X 3/8" Tube Assembly Tube Assembly Hose Assembly Tube Assembly Tube Assembly Tube Assembly M5-3-45.1(2 of 2) 09505 09505 36422 36422 36422 30966 90483 90483 72968 36422 36422 36422 72968 09505 36422 36422 09505 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-4-31.0 Parts List Rear Drum Shaft NA352-C M5-4-31.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List R284 Rear Drum Shaft - Continued REF. PART NO. QTY. 1 1X110 12 2 3 4 5 18D6 CB14 22C8 lX3446 4 2 2 2 6 1X2284 4 7 1X2626 4 8 9 10 22Dll 22D5 1X3601 2 2 12 11 12 22D12 22C26 1X2649 2 AR 2 13 1X1978 2 14 15 16 17 18 19 22D14 22D20 12H49 22Y1 22D202 22D8 1 1 1 1 1 1 DESCRIPTION FSCM No. Locknut, Nylon Insert, National UNF-3B Thread, Grade 5, Low Carbon Steel, Rockwell C32, 7/8" Capscrew End Cap Clutch Drum Oil Seal, Case-Low Carbon Steel, Sealing Lip - Synthetic Rubber, Garter Spring - Spring Steel, 6" I.D. X 7.508" O.D. X 9/16" Ball Bearing, Single Row, Radial, Ring And Balls, High Carbon Chromium Steel, Cage-Low Carbon Steel, 4.3307 I.D. X 6.6929 Snap Ring, Internal, Carbon Spring Steel, Phosphate Coated, 6-5/8" Spacer Spur Gear Capscrew, Hex Head UNF-Class 2A, Grade 5, Zinc Plated, 7/8" X 3-3/4" Spacer Shim, 22 Gauge Snap Ring, Internal, Carbon Spring, Steel, Phosphate Coated, 7-3/4" Ball Bearing, Single Row Radial, Shield One Side Rings And Balls - High Carbon Chromium Steel, Cage And Shield Low Carbon Steel, 4.3307 I.D. X 7.8740 O,D. X 1.4961 Spacer Brake Drum Hydroid Washer Wedge, 7/8" Rope Drum Rear Drum Shaft M5-4-31.0 (2 Of 2) 72968 36422 36422 36422 80201 91936 X 1.1024 79136 36422 36422 90483 36422 36422 79136 91936 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-4-54.1 Parts List Rear Drum Lines NA364-D M5-4-54.1(1 of 2) TM 10-3950-263-14&P-3 Parts List Rear Drum Lines - Continued REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 22J43 1X1157 JC2987 JC2279 22J583 AA562 JC2279 22J593 1X1162 1 5 2 2 1 1 1 1 2 22J84 1X1152 22J601 22J603 22J607 28J587 22J609 28J560 1 2 1 1 1 2 1 2 22J587 1 DESCRIPTION FSCM No. Tube Assembly Union, 370 Flare, Steel, 1/2" Bracket Tube Clamp Tube Assembly Bracket Tube Clamp Tube Assembly Elbow, Union 900, 370 Flare, Steel, Zinc Plated, 1/2" Tube Assembly 37° Male Connector, Flare, Steel, 1/2" X 3/8" Tube Assembly, Top Tube Assembly, Bottom Tube Assembly Bulkhead Union Tube Assembly Hose Assembly Clutch Rotating Joint, See M5-9-25.0 Tube Assembly M5-4-54.1(2 of 2) 36422 09505 36422 36422 36422 36422 36422 36422 09505 36422 09505 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-7-37.0 Parts List Planetary Brake Assembly M5-7-37.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Planetary Brake Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 22D153 1 Brake Band Assembly PX377 1 Lining Kit For One Brake 2 1X6228 1 Locknut, Hexagon, Cold Drawn Commercial Bar Steel, Spring Steel Insert, UNC-2B, 1-1/8" 3 1E104 1 Spacer 4 DC75 1 Spring 5 lX5710 1 Capscrew, Hex Head, UNC Class 2A - Grade 8, 1-1/8" X 12-1/2" 6 22D154 1 Brake Band Assembly PX377 1 Lining Kit For One Brake 7 1J1952 1 Cylinder Assembly 8 1J1953 1 Body 9 1J1954 1 Piston 10 20C46 1 Oil Seal - Wiper Ring 11 LX1963 1 Snap Ring 12 1J1959 1 Compression Spring (Inner) 13 1J1958 1 Compression Spring (Outer) 14 1X1781 1 Roll pin, Carbon Steel, Natural, 1/4" X 2" 15 1D278 1 Pin 16 1X3968 1 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/16" X 3/4" 17 12C56 1 Rod End 18 lX2548 1 Roll pin, Carbon Steel, Natural, 3/8" X 4-1/2" 19 1J1957 1 Push Rod Seat 20 1J1956 1 Push Rod 21 1X2746 4 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1" 1X30 4 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" 22 1J1960 1 Cylinder Bracket 23 19D124 2 Spacer 24 1D323 AR Shim, 16 GA BCl1O9 AR Shim, 1/8" 25 22D288 1 Bar 36422 22D287 1 Hub 1X3938 1 Roll pin, Carbon Steel, Natural, 1/4" X 3-1/4" 26 19D118 1 Brake Anchor Rod M5-7-37.0 (2 Of 2) FSCM No. 36422 36422 72968 36422 36422 90483 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 36422 72968 36422 09505 36422 36422 90483 20859 36422 36422 36422 36422 36422 09505 36422 Parts List Planetary Drive "Slow Down" Only R583 M5-7-79.0 (1 Of 3) TM 10-3950-263-14&P-3 M5-7-79.0 TM 10-3950-263-14&P-3 Parts List R583 Planetary Drive "Slow Down" Only - Continued REF. PART NO. QTY. DESCRIPTION 1 22E14 1 Gear W/Wear Sleeve 2 1X3570 1 Wear Sleeve, AISI CRCQ .15% Carbon Maximum, 7-7/8" Shaft Dia. X 8.011 O.D. X 3/4" 3 1X5479 1 Oil Seal, Case - Low Carbon Steel, Sealing Lip 8.000" X 9.258" X 3/8" 4 1X2956 1 Wear Sleeve, AISI CRCQ .15% Carbon Maximum, 4-7/8" Shaft Dia. X 5.000" O.D. X 3/4" 5 22D43 1 Spacer 6 22D47 1 "O" Ring 7 22D41 1 Spacer 8 22E20 1 Shaft 9 lX2211 Ball Bearing, Single Row Shield One Side, Ring And Balls - High Carbon Chromium Steel, Cage And Shield Low Carbon Steel, 4.3307" I.D. X 6.6929" O.D. X 1.1024" 10 lX3422 1 Oil Seal, Case - Low Carbon Steel, Sealing Lip- Synthetic Rubber Garter Spring - Spring Steel, 5" X 6.256" X 5/8" 11 22D21 1 Gear Case 12 lX837 1 Countersunk Pipe Plug, Steel, 1/2" 13 1X3425 1 Dowel Pin, Steel, 3/8" X 1-1/4" 14 1X3420 1 Ball Bearing, Single Row, Rings And Balls - High Carbon Chromium Steel, Cage - Low Carbon Steel, 7-1/4" X 9-3/4" X 1-1/4" 15 22D19 1 Gear, 32 Tooth 16 lX3411 8 Cylindrical Roller Bearing AFBMA Type RY, Single Row Series 03, Rings And Rollers - High Carbon Chromium Steel, 1.7717" I.D. X 3.9370" O.D. X .9843" 17 22D15 4 Planet Gear 18 1X69 1 Snap Ring External, Carbon Spring Steel, Phosphate Coated 7" 19 lX3421 1 Ball Bearing, Single Row Rings And Balls - High Carbon Chromium Steel, Cage - Low Carbon Steel, 4.3307" I.D. X 5.9055" O.D. X .7874" 20 20J1050 4 “0" Ring 21 22D45 4 End Cap 1X3357 12 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X -1/2" 1X28 12 Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" 22 22E18 1 Spacer 23 22E16 1 End Cap 22E17 1 Gasket 18D6 2 Capscrew 24 29D213 3 Relief Valve 1X974 1 Pipe Nipple, Standard Weight, Wrought Steel, NPT Threads, 1/8" X 1" AC79 1 Coupling 25 1X3424 1 Wear Sleeve, AISI CRCQ .15% Carbon Maximum 6" X 6-1/8" X 3/4" 26 1X3423 1 Oil Seal, Case - Low Carbon Steel, Sealing Lip Synthetic Rubber, Garter Spring - Spring Steel, 6-1/8" X 7.133" X 5/8" 27 22D42 1 Spacer 28 22D22 1 Gear Case Cover M5-7-79.0 (2 Of 3) FSCM No. 36422 80201 80201 80201 36422 36422 36422 36422 91936 80201 36422 09505 09505 91936 36422 19382 36422 79136 91936 36422 36422 90483 20859 36422 36422 36422 36422 36422 09505 36422 80201 80201 36422 36422 Parts List R583 Planetary Drive "Slow Down" Only - Continued REF. PART NO. QTY. DESCRIPTION lX3302 24 1X30 24 29 30 22D48 lX1526 1 1 31 lX3419 1 32 33 22Dl10 1X2249 1 1 TM 10-3950-263-14&P-3 M5-7-79.0 FSCM No. Capscrew, Hex Head, UNC Class - 2A - Grade 5, 1/2" X 1-1/2" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" "O" Ring Snap Ring External, Carbon Steel, Phosphate Coated, 5-1/2" Ball Bearing, Single Row, Rings And Balls - High Carbon Chromium Steel Cage - Low Carbon Steel 5-1/2" I.D. X 7-1/2" O.D. X 1" Gear, 38 Tooth Magnetic Pipe Plug, Hexagon Socket, Steel, 1/2" M5-7-79.0 (3 Of 3) 90483 20859 36422 79136 91936 36422 36540 Parts List Boom Hoist Shaft R482 TM 10-3950-263-14&P-3 M5-8-22.0 NA352-C M5-8-22.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List R482 Boom Hoist Shaft - Continued REF. PART NO. QTY. 1 1X110 6 2 3 4 5 18D6 CB14 22C8 1X3446 2 1 1 1 6 1X2284 2 7 1X2626 3 8 9 10 11 12 22D11 ’22E79 1X3601 22D12 22C26 1X2649 1 1 6 2 AR 2 13 1X1978 2 14 15 16 17 18 19 22E20 1Y87 22E69 12H49 22E4 22D14 1 1 1 1 1 1 DESCRIPTION FSCM No. Locknut, Nylon Insert, Hexagon, National UNF-3B Thread, Grade 5, Low Carbon Steel, Rockwell C32, 7/8" Capscrew End Cap Clutch Drum Oil Seal, Case-Low Carbon Steel, Sealing Lip - Synthetic Rubber, Garter Spring - Spring Steel, 6" I.D. X 7.508"0.D. X 9/16" Ball Bearing, Single Row, Radial, Rings And Balls High Carbon Chromium Steel, Cage- Low Carbon Steel, 4.3307" I.D. X 6.6929" O.D. X 1.1024" Snap Ring, Internal, Carbon Spring Steel, Phosphate Coated, 6-5/8" Spacer Gear Capscrew, 3H/ Head, UNF- Class 2A, Grade 5, Zinc Plated, Spacer Shim Snap Ring, Internal, Carbon Spring, Steel, Phosphate Coated, 7-3/4" Ball Bearing, Single Row Radial, Shield One Side, Rings And Balls - High Carbon Chromium Steel, Cage & Shield Low Carbon Steel, 4.3307" I.D. X 7.8740" O.D. X 1.4961" B/H Shaft Wedge Rope Drum Hydroid Washer Drum Brake Spacer Note: See M5-7-72.0 For Planetary Assembly M5-8-22.0 (2 Of 2 ) 72968 36422 36422 36422 80201 91936 79136 36422 36422 90483 36422 36422 79136 91936 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M5-8-74.0 Parts List Boom Hoist Brake And Pawl Controls M5-8-74.O0 (1 Of 3 ) TM 10-3950-263-14&P-3 Parts List Boom Hoist Brake And Pawl Control - Continued REF. PART NO. QTY. DESCRIPTION 1 lX4992 1 Locknut, Nylon Insert, High Tensile, Medium Carbon Steel Rockwell C25-34, UNC-3B, 1-3/8" 18D186 AR Stand-Cote 2 22D84 1 Spacer 18E50 1 Spherical Washer 18E51 1 Spherical Washer 3 18D97 1 Compression Spring 4 lX5416 1 Hex Capscrew, UNC Class-2A - Grade 5, Steel, 1-3/8" X 12" 18D187 AR Stand-Cote 18E50 1 Spherical Washer 18E51 1 Spherical Washer 5 22E63 1 Brake Band PX452 1 Lining Kit (For One Brake Assembly) 6 lX193 1 Hexagon Jam Nut, 1/4", UNF-2B, Steel, Zinc Plated 7 JC2238 1 Stamping 8 JC2208 1 Pin lX1080 1 Cotter Pin, Extended Prong, Square Cut, 1/16" X 1/2" 9 JC2340 1 Yoke 10 HB173 1 Yoke Pin lX1302 1 Cotter Pin, Extended Prong, Square Cut, 3/32" X 3/4" 11 22J370 1 Pawl 12 22J337 1 Pin 9M404 1 Lockbar 1X4062 2 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 3/4" 1X4232 2 Coiled Steel Journal Bearing, Carbon Steel W/Woven Teflon Fiber I.D. Surface, 1.5000" Shaft Dia. X 1.6558" Housing Dia. X 1.000" JA1021 AR Spacer (Use To Center To Pawl) 13 lX194 1 Hexagon Jam Nut, 3/8", UNF-2B, Steel, Zinc Plated 14 JC313 1 Spring JC2393 1 Rod 15 JC2177 2 Spring Seat 16 1J1480 2 Clamp 1X4199 2 Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/4" X 1-3/4" 1X2404 2 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" 1X5079 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" 17 18E52 1 Pin 18 18C29 1 Pin 1X2774 2 Needle Roller Bearing, Drawn Cup, AFBMA Type NIB W/Oil Hole, Rollers-High Carbon Chromium Steel, Cup-Low Carbon Steel, 1-1/2" I.D. X1-7/8" O.D. X 1-1/4" Lg. W/Oil Hole VB92 AR Shim, 16 Gauge 1A1275 AR Shim, 26 Gauge 19 22E48 1 Bell Crank 20 22E65 1 Brake Band PX452 1 Lining Kit (For One Brake Assembly) 21 R2J15O 1 Pin 1X4475 1 Needle Roller Bearing, Drawn Cup, AFBMA Type NIB, Rollers - High Carbon Chromium Steel, Cup - Low Carbon Steel Loading End Not Carburized, 1" I.D. X 1-1/4" O.D. X 1" Lg. W/O Oil Hole M5-8-74.0 (2 Of 3) FSCM No. 72968 36422 36422 36422 36422 36422 90483 36422 36422 36422 36422 36422 90483 36422 36422 20859 36422 36422 20859 36422 36422 36422 72968 80657 36422 90483 36422 36422 36422 36422 90483 86157 72968 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 80657 TM 10-3950-263-14&P-3 Parts List R284 Boom Hoist Brake And Pawl Controls - Continued REF. PART NO. QTY. DESCRIPTION 22 1X5137 6 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1-1/4" 23 1X3746 2 Capscrew, Hex Head, UNC Class-2A - Grade 5, 5/8" X 4-1/2" 1X3870 2 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 5/8" 24 22J153 1 Mounting Stand 25 18J21 1 Cylinder Assembly 26 18J23 1 Piston 20C46 1 Oil Seal 1X1963 Truarc Retaining Ring, Internal, Carbon Spring Steel, Phosphate Coated, 2-1/2" 27 22J151 1 Rod 28 1X185 3 Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 3/4" 29 AC193 3 Clevis 30 22J162 2 Spring Seal 31 18J16 1 Spring 32 1X155 2 Finished Hexagon Nut, Coarse Thread, Carbon Steel, 3/4" 33 22J155 1 Rod 34 lX812 2 Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short 35 9M404 1 Lockbar 8A151 2 Capscrew 36 22J178 3 Bell Crank 37 JC22 3 Pin 1X1086 1 Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" 38 18J32 1 Lockbar 39 1X5133 2 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 5/8" 22J1744 1 Pawl Control Label, Not Shown M5-8-74.0 (3 Of 3) FSCM No. 72968 90483 72968 36422 36422 36422 36422 79136 36422 90483 36422 36422 36422 90483 36422 78385 36422 36422 36422 36422 20859 36422 72968 36422 TM 10-3950-263-14&P-3 M5-8-83.1 Parts List Boom Hoist Lines NA363-D M5-8-83.1(1 of 2) TM 10-3950-263-14&P-3 Parts List Boom Hoist Lines - Continued REF. 1 2 PART NO. 1X1935 1X1162 QTY. 1 3 3 4 22J41 1X1160 1 1 5 6 7 22J138 18J959 JC2279 JC2987 1X4062 1 1 1 1 1 8 9 18J811 1X1169 1 1 1J1189 1X1911 22J591 22J923 22J597 JC2987 JC2279 1X1157 32J855 32J940 22J607 28J587 22J609 18J860 22J159 1J1189 18J996 1X1152 22J122 28J560 1 1 1 1 1 1 1 5 1 1 1 2 1 1 1 1 1 1 1 2 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DESCRIPTION Adapter Union 900, Steel, 3/8" X 3/8" Elbow, Union 90°, 37° Flare, Steel, Zinc Plated, 1/2" Tube Assembly Connector, Female 370 Flare, Steel, Zinc Plated, 1/2" Tube Assembly Shuttle Valve Clamp 36422 Bracket 36422 Locking Capscrew, Hex Head, UNC Class 2A, 3/8" X 3/4" Tube Assembly Tee, Female Run, 37° Flare, Steel, Zinc Plated, 1/2" X 3/8" Elbow Elbow, 900 Street, Steel, 3/8" Tube Assembly Tube Assembly Tube Assembly Bracket 36422 Tube Clamp Union, 370 Flare, Steel, 1/2" Tube Assembly, Top Tube Assembly, Bottom Tube Assembly Bulkhead Union Tube Assembly Tube Assembly Tube Assembly Elbow Tube Assembly Male Connector, 370 Flare, Steel, 1/2" X 3/8" Tube Assembly Hose Assembly M5-8-83.1(2 of 2) FSCM No. 09505 09505 36422 09505 36422 36422 72968 36422 09505 36422 09505 36422 36422 36422 36422 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 36422 36422 TM 10-3950-263-14&P-3 Parts List M5-9-15.1 Clutch Cylinder Assembly N7-A REF. PART NO. QTY. 1 22C16 1 2 3 4 5 6 22C14 1C300 1C280 1C204 1C289 1 2 4 2 2 DESCRIPTION FSCM No. Clutch Cylinder Assembly, Consisting Of The Following Replaceable Parts: Body Wiper Ring Back-up Washer "0" Ring36422 Piston 36422 M5-9-15.1(1 of 1) 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List M5-9-25.0 Clutch Rotating Joint D404-D REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 1J673 1J674 1J675 JU4 PX177 PX176 JU5 JC2529 JC1674 JC1675 1 1 1 2 1 1 2 1 1 1 DESCRIPTION FSCM No. Rotating Joint Assembly Housing Rotor Adapter Ring "V" Packing - Kit of 6 (2 Per Kit) "V" Packing - Kit of 4 (4 Per Kit) Adapter Ring Spring Shim, 12 Ga. Snap Ring - Internal M5-9-25.0(1 of 1) 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R1184 Clutch Assembly, 23" X 6" M5-9-44.0(1 of 3) M5-9-44.0 TM 10-3950-263-14&P-3 Parts List R118 Clutch Assembly, 23" X 6" - Continued REF. PART NO. QTY. 22C131* 2C132* 22C103 DC348 lX1516 22C10 1J1189 22C15 1X4474 1 1 1 1 1 2 1 1 1 2 1X20 2 22C7 9C311 PX431 22Cl10 1C35 22C140 22C6 1C299 1C143 1C227 25C80 1C293 1C43 1C165** 1X22** 1 1 2 1 1 1 2 1 1 1 1 1 1 1 AR AR 26 27 28 1C78 1C79 1C80 1C179 1C38 1X2442 AR AR AR 2 4 2 29 30 31 32 22C104 22C46 1J1200 1X4148 2 2 1 2 1X20 2 33 1X1800 2 34 1X3971 2 1X4 2 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DESCRIPTION FSCM No. Clutch Assy. - Right Side Clutch Assy. - Left Side Rotating Joint (See Keysheet, Page 5-9-) Rotating Joint Adaptor Assy. Slinger Cup Drive Screw Adaptor Elbow Gasket Locking Capscrew, Hex Head, N.C., UNC Class 2A - Grade 5, 1/2" X 3-1/2" Plain Washer, Hot Rolled Mild Steel, 79807 Natural Finished, 1/2" Clutch Cylinder Assembly (See Keysheet Page 5-9- ) Clutch Lever Clutch Shoe Lining Kit - For Two Clutch Shoes Clutch Spider W/Pins Piston Rod Bushing Clutch Lever Clutch Adjusting Assembly Adjusting Bolt Jam Nut Serrated Washer Adjusting Nut Compression Spring Shim, 20 Ga. Plain Washer, Hot Rolled, Mild Steel, Natural Finished, 1" Shim, 12 Ga. Shim, 16 Ga. Shim, 28 Ga. Extension Spring Rollpin Cotter Pin, Extended Prong, Square Cut, 5/16" X 2-1/2" Shoe Retainer Clutch Lever Pin Hose Assembly, 1’4" (40.64 cm) Locking Capscrew, Hex Head, N.C., UNC Class, 2A - Grade 5, 1/2" X 1" Plain Washer, Hot Rolled, Mild Steel, 79 807 Natural Finished, 1/2" Grease Fitting, 1/8", 900, Steel, 78385 Bright Zinc Plated, Ball Check At Top Locking Capscrew, Hex Head, N.C., UNC Class, 16941 2A - Grade 5, 3/8" X 1" Plain Washer, Hot Rolled, Mild Steel, 79807 Natural Finished, 3/8" 9-44.0(2 of 3) 36422 36422 36422 36422 36422 36422 36422 36422 36422 16941 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 79807 36422 36422 36422 36422 36422 20859 36422 36422 36422 16941 Parts List R1184 TM 10-3950-263-14&P-3 M5-9-44.0 Clutch Assembly, 23" X 6" - Continued REF. PART NO. * ** QTY. DESCRIPTION FSCM No. Both Left And Right Hand Clutches Are Used On Machine. Terms Left And Right Hand Are Used To Denote The Way Clutch Shoes And Actuator Arms Are Mounted On Clutch Spider. All Parts From A Right Hand Clutch Are Interchangeable With All Parts Of A Left Hand Clutch, But Are Assembled Opposite. On A Right Hand Clutch Shoes Are Installed In A Clockwise (R.H.) Direction From Shoe Toe To Heel. On A Left Hand Clutch. The Shoes Are Assembled In A Counterclockwise (L.H.) Direction From Shoe To Heel. For Further Clarification, Consult Service Manual, Page 5-9- . Use Shims As Required Between Lugs Of Spider & Lever Arms To Center Push Rods W/Hole In Piston. M5-9-44.0(3 of 3) TM 10-3950-263-14&P-3 M5-10-24.0 Parts List Rotation Indicator D223-A,D211-A REF. PART NO. QTY. 1 2 3 4 5 6 22J547 28J732 22J1099 22J548 28J2423 1X5965 1 1 1 1 2 8 7 8 9 10 28J730 28J731 18D99 28J709 1X4292 2 2 2 2 2 28J1609 4 DESCRIPTION FSCM No. Harness Amplifier Wire Assembly Wire Assembly Mount Capscrew, Hex Socket Head, NC-3 Threads, Heat Treated Alloy Steel, Grade 8, #6 X 3/8" Sending Unit Shaft Coupling Adaptor Hex Socket Set Screw, Cup Point, Heat Treated Alloy Steel, UNF3A, #6 X 1/2" Items Not Shown: Shock Mount M5-10-24.0(1 of 1) 36422 36422 36422 36422 36422 90483 36422 36422 36422 36422 90483 36422 Parts List R683 Front And Rear Drum Brake Controls M5-12-40.0 (1 of 3) TM 10-3950-263-14&P-3 M5-12-40.0 TM 10-3950-263-14&P-3 Parts List R683 Front And Rear Drum Brake Controls - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PART NO. QTY. 22D144 PX419 1X4992 1 18D186 18D23 18E50 18E51 1D92 1X5416 18D187 22D146 PX419 22D142 AR 2 2 2 2 2 AR 1 1 1 18D164 18D10 1X1356 1X1097 1D144 1D145 1J218 18D9 JC22 1X1086 22D139 PX419 37J96 18J440 1J20 1X5137 2 2 2 2 AR AR AR 2 6 6 1 1 1 1 1 2 1X20 22J437 1X3302 1X20 1X3808 2 1 2 2 2 22J431 1J20 18J5 1X198 JC646 4D138 1X21 1X1305 9J6 1X184 1 1 1 14 12 2 2 2 2 6 JC1547 JC1545 JC2158 1J19 2 2 4 1 2 DESCRIPTION FSCM No. Brake Band Lining Kit - For One (1) Brake Assembly Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34, UNC-3B, 1-3/8" Stand-Cote Spacer Washer Washer Compression Spring Hex Capscrew, UNC Class-2A - Grade 8, Steel, 1-3/8" X 12" Stand-Code Brake Band Lining Kit - For One (1) Brake Assembly Brake Band 36422 Lining Kit - For One (1) Brake Assembly Pin 36422 Pin 36422 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1-1/4" Cotter Pin, Extended Prong, Square Cut, 1/4" X 1-3/4" Shim Shim Shim Bellcrank Pin 36422 Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Brake Band 36422 Lining Kit - For One (1) Brake Assembly Rod 36422 Rod 36422 Lever 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Torque Tube 36422 Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Torque Shaft Lever Bearing Hexagon Jam Nut, 5/8" UNF-2B, Steel, Zinc Plated Clevis Pin Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/8" Cotter Pin, Extended Prong, Square Cut, 3/16" X 1" Clevis Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 5/8" Spring Bolt Spring Spring Collar Arm Lever M5-12-40.0 (2 of 3) 36422 36422 72968 36422 36422 36422 36422 36422 90483 36422 36422 36422 36422 86157 20859 36422 36422 36422 36422 20859 36422 72968 86157 90483 86157 72968 36422 36422 36422 90483 36422 36422 86157 20859 36422 90483 36422 36422 36422 36422 Parts List R683 TM 10-3950-263-14&P-3 M5-12-40.0 Front And Rear Drum Brake Controls - Continued REF. PART NO. QTY. 30 1X812 7 31 1J19 18J5 1X3734 1X3808 1 1 4 4 33 1X598 2 34 35 19D9 1X183 2 2 36 1J29 1X1093 22J804 JC22 1X1086 22J791 1A2474 9J7 9J996 JT287 1X1087 1X5253 1 2 2 4 4 1 2 2 1 2 4 2 22J803 JC4277 1X1086 1M5799 JA82 JC1543 1X3968 1 2 2 2 2 2 4 1X181 2 22J802 22J433 18J1460 1X5300 1 2 1 1 9C85 1X5137 1 4 18J6 18J29 DC453 JB767 22D156 19D82 1X1277 1 1 2 1 2 1 1 32 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 DESCRIPTION FSCM No. Grease Fitting, 1/8", 60u, Steel, Bright Zinc Plated, Ball Check At Top Lever Bearing Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Square Head Set Screw, Clip Point Coarse Threads, Carbon Threads, Carbon Steel Case Hardened, 1/2" X 2-1/2" Support Bracket Finished Hexagon Jam Nut, Coarse Thread Steel, Zinc Plated, 1/2" Pin Cotter Pin, Extended Prong, Square Cut, 3/16" X 1-1/2" Bellcrank Pin Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Support Rod Connecting Link Pin Pin Cotter Pin, Extended Prong, Square Cut, 1/8" X 1-1/4" Hexagon Head Capscrew, UNF Class-2A, Grade 5, Plastic Patch, Zinc Plated, Chromate Treated, 1/2" X 7" Pedal (Front Drum) Lock Pedal Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Spacer Yoke Pin Ext. Spring Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 5/16" X 3/4" Finished Hexagon Jam Nut, Coarse Thread, Steel Zinc Plated, 5/16" Pedal (Rear Drum) Rod Bracket Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 1/2" Lock Bar Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1-1/4" Pin Bellcrank Bearing Rod Link Pin Cotter Pin, Extended Prong, Square Cut, 1/4" X 1-1/2" M5-12-40.0 (3 Of 3) 78385 36422 36422 90483 72968 90483 36422 90483 36422 20859 36422 36422 20859 36422 36422 36422 36422 36422 20859 72968 36422 36422 20859 36422 36422 36422 72968 90483 36422 36422 36422 72968 36422 72968 36422 36422 36422 36422 36422 36422 20859 TM 10-3950-263-14&P-3 M5-14-4.0 Parts List Swing Brake Assembly REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. QTY. 9M404 8A151 1X812 DT33 9D34 VB92 1A1275 1X9 1X3800 1 2 1 2 1 AR AR 1 2 1X31 2 1X154 AC2824 18J127 1X3768 2 1 1 2 1X31 2 1J255 1C194 * 1C97 * 1 1 1 DESCRIPTION FSCM No. Lock Plate Capscrew Grease Fitting, 1/8" -27 Dryseal PTF-SAE Short Adjusting Nut Pivot Pin Shim, 16 Gauge Shim, 26 Gauge Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 7/8" Capscrew, Hex Head, UNC Class 2A - Grade 5, 5/8" X 2-3/4" Spring Lockwasher, Medium Series, Carbon Steel, 20859 Natural, 5/8" Finished Hexagon Nut, Coarse Thread, Carbon Steel, 5/8" Spring Retainer Bracket Capscrew, Hex Head, UNF-Class 2A-Grade 5, Zinc Plated, 5/8" X 3-3/4" Spring Lockwasher, Medium Series Carbon Steel, Natural 20859 5/8" Cylinder Assembly "O" Ring Back-Up Ring M5-14-4.0 (1 of 2 ) 36422 36422 78385 36422 36422 36422 36422 86157 90483 90483 36422 36422 90483 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Swing Brake Assembly - Continued REF. PART NO. QTY. 14 15 16 36422 17 18 1J257 AC2825 18J46 1 1 1 Piston Spring Rod 36422 36422 1 1 1 1 2 1 1 2 1 2 24 * 3X257 1 Bell Crank Brake Band 36422 Lining Kit (For One Brake Assembly) Pin Cotter Pin, Extended Prong, Square Cut, 3/16" X 1-1/2" Brake Band Lining Kit (For One Brake Assembly) Pin Anchor Pin Needle Roller Bearing, Drawn Cup, AFBMA Type N1B W/Oil Hole, Rollers-High Carbon Chromium Steel, Cup-Low Carbon Steel, 1-1/2 I.D. X 1-7/8 O.D. X 1-1/4 Lg. Swing Brake Line (See Keysheet Hyd. Lines, M7-4-153.0) Seal Kit 36422 21 22 23 18C28 18C25 PX447 18C33 1X1093 18C24 PX447 18C30 18C29 1X2774 19 20 DESCRIPTION FSCM No. M5-14-4.0 (2 Of 2) 36422 36422 20859 36422 36422 36422 80657 36422 Parts List R782 GM6-71 W/Single Stage Torque Convertor M6-5-60.0 (1 Of 4) TM 10-3950-263-14&P-3 M6-5-60.0 TM 10-3950-263-14&P-3 Parts List R782 GM6-71 W/Single Stage Torque Convertor - Continued REF. 1 2 3 PART NO. 45J279 17H61 1X2332 1X814 8H1079 1X1173 19H314 22H240 1H1581 HC1935 1X2574 1X3809 QTY. 2 1 1 1 1 4 2 1 1 1 2 2 1X829 1X3778 1X5079 1 1 1 1N2239 28N1252 1X3853 1X58 1X4513 1 1 4 4 4 1H1833 1H1834 1H1830 1H1835 1H1831 1X3743 1X5079 1 1 1 1 1 2 2 1X3777 1X5079 1 1 28N1252 1X3765 1X56 1X3808 1 2 2 2 19 20 19H316 1X2574 1X3809 1 2 2 21 18A2746 8H844 22H470 22H466 1X3 1X3913 1X829 1H2430 1X3357 1X4 2 2 2 1 2 2 1 1 4 4 4 5 6 7 8 10 11 12 13 14 15 16 17 18 22 23 24 25 26 27 DESCRIPTION Temperature Sending Unit Pressure Sending Unit Street Tee, Steel, Zinc Plated, 1/4" Reducing Bushing, Steel, Bright Zinc, 1/4" X 1/8" Pressure Switch 90°, Male Elbow, 37° Flare, Steel, 3/4" X 1/4" Hose Assembly Hose Assembly Crankcase Drain Hose Crankcase Drain Anchor Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Pipe Plug, Square Head, Steel, 1/2" Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 3" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Spacer Tube Clamp 36422 Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/4" X 2-3/4" Bevel Washer, Malleable Iron, Taper 2" in 12", 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/4" Tee Bushing Air Box Drain Tank Drain Cock Air Box Drain Hose Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC -3B, 1/4" Tube Clamp Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 5" Bevel Washer, Malleable Iron, Taper 2" In 12", 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Dipstick Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Battery Battery Cable Bolt Battery Cover Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Wing Nut, Nylon Insert, Zamak Alloy, Unplated, 5/16" Pipe Plug, Square Head, Steel, 1/2" Engine Frame Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" M6-5-60.0 (2 Of 4) FSCM No. 36422 36422 09505 09505 36422 09505 36422 36422 364229 36422 90483 72968 09505 90483 72968 36422 90483 86157 72968 36422 36422 36422 36422 36422 90483 72968 90483 72968 36422 90483 86157 72968 36422 90483 72968 36422 36422 36422 36422 86157 90483 09505 36422 90483 86157 Parts List R782 TM 10-3950-263-14&P-3 M6-5-60.0 GM6-71 W/Single Stage Torque Convertor - Continued REF. 28 29 30 31 32 33 34 35 36 37 38 PART NO. 1X55 1X3809 QTY. 4 4 1lX937 19H323 22H242 22H482 822005005 1 1 1 1 AR 1J1193 1H406 8A4324 1H716 HC1930 HC2273 8H160 1X3575 2 2 1 1 1 1 1 1 19H318 19H317 1X3971 1 1 4 DESCRIPTION Bevel Washer, Malleable Iron, Taper 2" In 12", 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Street Elbow, 450, Malleable Iron, Black, 1-1/4" Panel Hose Assembly Engine Hose, Type A (Neoprene), One Ply Wrapped, Wire Reinforced, 1-1/4" I.D. X 6’ Tube Clamp Clip Adjustable Hose Clamp Hour Meter Vibration Dampner Starter Button Breather Cap36422 Pipe Nipple, Standard Weight, Wrought Steel, 1-1/4" X 10-1/2" Gasket Cover Plate 36422 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" M6-5-60.0 (3 Of 4) FSCM No. 86157 72968 09505 36422 36422 36422 24161 36422 36422 36422 36422 36422 36422 -9505 36422 72968 TM 10-3950-263-14&P-3 Parts List R782 GM6-71 W/Single Stage Torque Convertor REF. 39 40 PART NO. 22H225 1X3777 1X5079 QTY. 1 1 1 1J483 1X3778 1X5079 1 1 1 1N2239 1J483 1X3718 1X3808 1 1 4 4 22H316 19H340 18H483 1X3599 1X3809 1 1 3 1 2 2 47 22H298 1X2574 1X3809 2 4 4 48 49 50 51 52 32H511 18H482 HT549 22H498 1X2574 1X4 1X3809 1 1 1 1 4 4 4 53 54 55 56 18H480 18A2449 HT471 18H155 3H219 HT734 1X3971 1 2 2 1 1 1 2 58 21H69 1X2574 1X3809 1 4 4 59 20H160 18A510 1H2058 20H159 18A510 18H542 1 2 1 1 2 1 41 42 43 44 45 46 57 60 61 - Continued DESCRIPTION Panel 36422 Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/4" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Tube Clamp Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 3" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Spacer Tube Clamp Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/2" X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Torque Convertor, See M6-5-60.39 Exhaust Elbow Seal Clamp Bracket Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Angle Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Muffler Bracket Rain Cap Plate Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Elbow Clamp Mounting Band Air Cleaner Element Air Cleaner Head (Not Shown) Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Air Cleaner Support Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated Rockwell C32, Nylon Insert, UNC-3B, 3/8" Hump Hose Hose Clamp Tube Elbow Hose Clamp Exhaust Pipe * See Vendor Annex List For FSCFM NO. M6-5-60.0 (4 Of 4) FSCM No. 90483 72968 36422 90483 72968 36422 36422 90483 72968 36422 36422 36422 90483 72968 36422 90483 72968 36422 36422 36422 36422 90483 86157 72968 36422 36422 36422 36422 36422 72968 36422 90483 72968 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M6-5-60.1 Parts List Engine Lifter Bracket REF. PART NO. QTY. 1 5104609 5150568 103322 179862 5150568 103322 5150050 5150052* 4 4 4 4 4 4 2 2 AR 2 3 4 * DESCRIPTION FSCM No. Bolts, 7/16" -14 X 1-1/2" w/Seal Patch Washer, 7/16" Flat Copper Lockwasher, 7/16" Bolts, 7/16" -14 X 1-1/2" Washer, 7/16" Flat Copper Lockwasher, 7/16" Bracket, Engine Lifter - (Front And Rear) Gasket, Engine Lifter Bracket Part Of Cylinder Head Overhaul Gasket Kit (5193118) M6-5-60.1(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.2 Parts List Cylinder Block REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 5150060 517798 5153467 5150020 105451 5153117 5164294 108608 5152878 179882 103323 103221 179839 5196146 5151272 5145009 5121182 5150130 5115214 5142549 5139988 QTY. 1 2 4 8 8 8 8 8 1 2 2 6 6 1 6 5 4 2 2 2 2 DESCRIPTION Plate, Cylinder Block End - Rear Gasket, Cylinder Block End Plate Cleaner, Air Box Drain Gasket, Cylinder Block Hand Hole Cover Gasket, 3/8" Copper Cover, Cylinder Block Hand Hole Washer, 3/8" Flat Bolt, 3/8" -16 X 2-1/8" Plate, Cylinder Block End Front Bolt, 1/2" -13 X 1/8" Lockwasher, 1/2" Lockwasher, 3/8" Bolt, 3/8" -16 X 1" Block Assembly, Cylinder Plug Plug, 1/8" Pipe Plug, 1/4" Allen Head Pipe Plug, 5/16" Cup Plug, 1/2" Hex. Sock Head Pipe Plug, 3/4" Pipe Plug, 1" Cup M6-5-60.2(1 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Cylinder Block - Continued REF. 14 15 16 17 18 19 PART NO. QTY. 5111798 5150014 5178998 5178997 225815 5158674 5152149 120898 5145009 5154319 5121182 5145014 5151122 5115214 5156280 5145013 141346 5151576 103321 179839 5148436 5164190 148344 5116357 10 2 4 4 2 7 14 14 4 3 8 1 2 2 2 2 4 4 6 6 2 1 1 1 5144082 5151272 5150014 5183256 5150129 179835 103341 103321 5193115 1 6 2 1 2 1 1 1 AR DESCRIPTION FSCM No. Plug, 1" Pipe Plug, 1/4" Cup Plug, 1-3/4" -16 Gasket (w/5178998 Plug) Elbow, 5/16" Inverted Flared Tube 900 Cap, Main Bearing (Finished) Bolt, Main Bearing Cap Lockwasher, Main Bearing Cap Bolt Plug, 1/8" Pipe - See Note Plug, 1/4" X 5/16" Special See Note Plug, 1/4" Allen Head Pipe See Note Plug, 3/8" Pipe Headless See Note Plug, 3/8" Pipe - See Note Plug, 1/2" Hex. Socket Head Pipe- See Note Plug, 5/8" Cup See Note Plug, 3/4" Pipe See Note Dowel Pin, Crankshaft Thrust Washer See Note Dowel Pin (f/w Housing And Front Cover) - See Note Lockwasher, 3/8" Bolt, 3/8" -16 X 1" Bolt, 5/16" -18 X 3/4" (w/LW) Cover, Cylinder Block Water Hole Draincock, 1/4" (Cylinder Block Water Drain) Not Shown Gasket, Cylinder Block Water Hole Cover Following Items Are Required But Not Shown Plug (Air Compressor Return Line) Plug Plug, 1-1/4" (Core Hole) Plug, 1-1/4" O.D. -3/8" Pipe Tap Stud, 3/8" X 1-1/2" (Oil Pump To Main Bearing Cap) Bolt, 3/8" -16 X 5/8" Washer, 3/8" Flat Lockwasher, 3/8" Gasket Kit, Engine Overhaul (Consists Of Necessary Gaskets For One Complete Engine Overhaul) Note: Items Are Shipped Loose With Cylinder Block Assembly. Refer To Plugging Chart 18SP74. M6-5-60.2(2 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.3 Parts List Air Box Drains REF. 1 2 PART NO. 225815 106261 5158825 QTY. 2 2 2 DESCRIPTION Elbow, 5/16" Inverted Flared Tube 90° Washer, 5/16" Tube, Air Box Drain M6-5-60.3(1 of 1) FSCM No. 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.4 Parts List Cylinder Head M6-5-60.4(1 of 2) TM 10-3950-263-14&P-3 Parts List Cylinder Head - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 * PART NO. 5150013 5102770 5193541 5142549 5113773 5111332 5172874 5172757 5121182 5125237 5145014 5154453 5178976 5150132 5117564 5117562 5117369 5129845 18SP85 QTY. 2 1 1 4 2 10 4 24 13 5 2 4 4 2 12 24 12 1 1 5199527 5104701 5125108 5150362 5112899 5129919 5117003 5123812* 5150268 180016 103319 5183329 5183305* 5103659* 5119974 5186579 5186577 6 6 12 12 7 24 12 4 3 6 6 2 2 6 1 10 2 5193118 AR DESCRIPTION Nut, Cylinder Head Stud Head Assembly (Non Turbo), Cylinder Plug, Fuse Plug, 3/4" Pipe Sleeve, Pilot 26095 Nozzle, Water (Double Outlet) Nozzle, Water (Single Outlet) Insert, Exhaust Valve Plug, 1/4" Pipe - See Note Plug, 1/4" Hex. Socket Head - See Note Plug, 3/8" Pipe - See Note Plug, 3/8" -16 Special - See Note Plug, 7/16" -14 Special - See Note Plug, 3/4" Dia. Cup - See Note Guide, Exhaust Valve Bridge - See Note Seat - See Note Connector - See Note Connector - See Note Cylinder Head Assembly, Instruction Drawing For 4 Valve - See Note Tube Kit Ring Washer - See Note Stud, 3/8" -16 X 1-11/16" - See Note Stud, 7/16" -14 X 2-3/32" - See Note Guide, Exhaust Valve Bolt Gasket, Cylinder Head Governor Hole Cover Cover, Cylinder Head Governor Hole Bolt, 1/4" -20 X 1/2" Lockwasher, 1/4" Stud, Cylinder Head Gasket, Cylinder Head Water And Oil Gasket, Cylinder Head Compression Ring, Seal Ring, Seal(Water Hole) Ring, Seal(End Water Hole) Gasket Kit, Cylinder Head Overhaul - Consists Of Items Marked With A Single Aterisk(*) And Also Parts Indicated In M6-5-60.1, M6-5-60.17, M6-5-60.30, M6-5-60.31, And M6-5-60.34. Note: The Listed Items Are Shipped Loose With The Cylinder Head Assembly. M6-5-60.4(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.5 Parts List Crankshaft REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 * PART NO. 5151420 5115454 5150174 5156532 5179068 124549 5177528 444687 5192874 5159353 5113814 103321 5150271 444692 5114335 141346 5158674* 103334* 5152149* 5191503 QTY. DESCRIPTION 1 Spacer, Crankshaft Front Oil Seal 1 Seal, Crankshaft Oil - Front 1 Slinger, Crankshaft Oil - Front 1 Gear, Oil Pump Drive 1 Crankshaft Assembly 1 Key, 3/16" X 3/4" Woodruff 2 Dowel 6 Plug, 1/8" Pipe 7 Shell Set, Crankshaft Main Bearing 4 Washer, Crankshaft Main Bearing Thrust 1 Gear, Crankshaft Timing 6 Lockwasher, 3/8" 6 Bolt 1 Plug, 1/4" Pipe 1 Seal, Crankshaft Oil - Rear 4 Pin, 3/16" X 1/2" Dowel 7 Cap, Crankshaft Main Bearing 14 Lockwasher, 5/8" 14 Bolt, Crankshaft Main Bearing Cap AR Cap Set, Crankshaft Main Bearing Includes The Following Items: 1-5158674,4-141346, M6-5-60.5(1 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Crankshaft - Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 2-5152149,2-103334, And Indicated Items In M6-5-60.15, M6-5-60.17, M6-5-60.20, M6-5-60.28, And M6-5-60.29 M6-5-60.5(2 of 2) 26095 TM 10-3950-263-14&P-3 Parts List Crankshaft Front Cover REF. 1 2 3 4 5 6 7 PART NO. 103321 181360 103323 186631 186659 5175939 5150181 M6-5-60.6 QTY. DESCRIPTION AR Lockwasher, 3/8" 3 Bolt, 3/8" -24 X 3/4" AR Lockwasher, 1/2" 2 Bolt, 1/2" -13 X 2-1/4" 2 Bolt, 1/2" -13 X 3-3/4" 1 Cover, Crankshaft Front 1 Gasket, Crankshaft Front Cover M6-5-60.6(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Vibration Damper And Crankshaft Pulley REF. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 5158640 5156296 5156295 5100421 5134917 5144696 5153623 5157930 5131724 181394 103322 5139026 M6-5-60.7 QTY. DESCRIPTION 1 Cone, Vibration Damper - Rear 1 Hub Assembly, Vibration Damper 2 Dowel 1 Damper, Vibration 1 Cone, Vibration Damper- Front 1 Pulley, Crankshaft 1 Bolt, 1" -14 X 2-1/4" 1 Retainer, Crankshaft Pulley 2 Key, 3/8" X 1" Woodruff 6 Bolt, 7/16" -20 X 7/8" 6 Lockwasher, 7/16" 1 Belt Set (2 Belts), Crankshaft Pulley Drive (Not Shown) M6-5-60.7(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Flywheel And Flywheel Housing M6-5-60.8 M6-5-60.8(1 of 2) TM 10-3950-263-14&P-3 Parts List Flywheel And Flywheel Housing - Continued REF. PART NO. QTY. DESCRIPTION 1 5136473 1 Housing Assembly, Flywheel 2 5113061 1 Gasket, Flywheel Housing Small Hole Cover 3 5154669 1 Cover, Flywheel Housing Small Hole 4 186317 4 Bolt, 3/8" -24 X 5" 5138619 4 Washer, Flat 5 103321 26 Lockwasher, 3/8" 6 186312 4 Bolt, 3/8" -24 X 4" 186314 4 Bolt, 3/8" -24 X 4-1/4" 117049 4 Nut, 3/8" -24 Hex. 7 103321 6 Lockwasher, 3/8" 8 180121 2 Bolt, 3/8" -16 X 7/8" 9 5104506 2 Gasket, Flywheel Housing Large Hole Cover 10 5125108 2 Copper, Washer 11 103322 2 Lockwasher, 7/16" 12 179857 2 Bolt, 7/16" -14 X 7/8" 13 5122281 2 Cover, Flywheel Housing Large Hole 14 103323 8 Lockwasher, 1/2" 15 122408 8 Bolt, 1/2" -13 X 1" 16 5187323 2 Lockwire 17 5136559 6 Bolt, 3/8" -16 X 1" Lock 18 179839 2 Bolt, 3/8" -16 X 1 19 103323 6 Lockwasher, 1/2" 20 190770 6 Bolt, 1/2" -13 X 3-1/4" 21 5111798 1 Plug, 1" Pipe 22 5146646 1 Plug, 1-1/4" Pipe 23 5150054 1 Gasket, Flywheel Housing 24 117049 4 Nut, 3/8" -24 Hex. 25 5119988 1 Flywheel Assembly 26 5184773 1 Gear (118 Teeth), Flywheel Ring 27 907084 1 Bearing, Clutch Pilot 28 9410925 6 Bolt, 9/16" -18 X 2-1/4" Hex. Lock 29 5120753 1 Plate, Scuff (Bolt Retainer) 30 5155661 1 Baffle M6-5-60.8(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Connecting Rod And Piston M6-5-60.9 Cylinder Liner Mounted In Block M6-5-60.9(1 of 2) TM 10-3950-263-14&P-3 Parts List Connecting Rod And Piston - Continued REF. PART NO. QTY. DESCRIPTION Note: The Following Quantities Shown Are Per Cylinder 1 5135515 1 Rod Assembly, Connecting 5154360 1 Oriface, Connecting Rod 2 5117629 2 Nut 3 5132383 2 Bolt 4 5157274 2 Bushing, Connecting Rod Piston Pin 5 5150140 1 Nozzle, Connecting Rod Spray 6 5197489* 1 Ring Set, Piston - Oil Control 7 5198839** 1 Piston Assembly (Hardened Groove) 8 5188405** 2 Retainer, Piston Pin 9 5155839 2 Bushing, Piston Pin 10 5122321* 3 Ring, Piston Compression 11 5132606* 1 Ring, Piston Compression(Fire) 12 5113953** 1 Liner, Cylinder 13 5188406** 1 Pin, Piston 14 5192895 1 Shell Set, Connecting Rod Bearing 15 1 Gasket, Cylinder Head Compression - See M6-5-60.4 16 5184484 1 Insert, Cylinder Liner 5199569 AR Shim, Cylinder Liner(Not Shown) * ** FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 5199806 1 Ring Set (Hardened Groove), Piston - Consist Of All Items Marked With A Single Asterisk (*) 26095 5149262 1 Cylinder Kit - Consists Of All Items Marked With A Double Asterisk (**). 26095 M6-5-60.9(2 of 2) TM 10-3950-263-14&P-3 Parts List Camshaft And Gear Train M6-5-60.10 M6-5-60.10(1 of 2) TM 10-3950-263-14&P-3 Parts List Camshaft And Gear Train - Continued REF. PART NO. QTY. DESCRIPTION 1 5114031 2 Weight, 6-71 Front Balance 2 186622 12 Bolt, 3/8" -16 X 1-1/4" 3 103321 12 Lockwasher, 3/8" 4 5111422 4 Bearing, Cam And Balancer Shaft End 5111423 8 Bushing, Cam And Balancer Shaft End 5 5149393 1 Camshaft Kit, 6 Cylinder R.H. Rotation (Standard Timing) 6 5151277 2 Plug 7 5153914 2 Key, 1/4" Woodruff 8 5102668 2 Key, 1/4" X 1" Woodruff 9 5115572 10 Ring, Camshaft Intermediate Bearing Lock 10 5196022 5 Bearing Set, Camshaft Intermediate - See Note 11 5123383 5 Bolt, 1/4" -28 X 45/64" 12 5121970 2 Weight, 6-71 Rear Balance 13 5121816 1 Gear (R.H. Helix), Camshaft 14 181370 4 Bolt, 3/8" -24 X 1-1/4" 15 5172734 2 Retainer, Cam And Balancer Shaft Gear Nut 16 186627 8 Bolt, 3/8" -24 X 1" 103321 8 Lockwasher, 3/8" 17 5150087 4 Nut 18 5121815 1 Gear (R.H. Helix), Balancer Shaft 19 5158673 1 Shaft, 6-71 Balance 20 5111424 4 Washer, Cam And Balancer Shaft End Bearing Thrust 21 5177769 2 Lockwasher 22 5199384 1 Gear Assembly (L.H. Helix), Idler 23 5113817 1 Gear (L.H. Helix), Idler 24 7451948 1 Bearing Assembly 25 5176998 1 Retainer, Idler Gear Bearing 26 5167714 1 Washer, 1/2" X .094" 27 454992 1 Bolt, 1/2" -13 X 1/2" 28 5103534 6 Bolt, 5/16" -24 X 1/2" (Vibra-tite) 29 5130135 1 Hub Assembly, Idler Gear 30 5151444 1 Dowel 31 454992 1 Bolt, 1/2" -13 X 2-1/2" 32 5131719 1 Spacer Assembly, Idler Gear Hole 5151444 1 Dowel 33 5167714 1 Washer Note: A Bearing Set Consists Of One Upper And One Lower Bearing M6-5-60.10(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Balance Weight Cover REF. 1 2 3 4 5 6 PART NO. 181385 103321 5138237 5143644 5150014 5121753 179846 103321 5164294 186309 103321 191249 103321 M6-5-60.1 1 QTY. DESCRIPTION 10 Bolt, 3/8" -24 X 3" AR Lockwasher, 3/8" 1 Cover, Balance Weight 4 Plug, 5/16" -18 2 Plug, 1-1/4" Core Hole 1 Gasket, Balance Weight Cover 2 Bolt’, 3/8" -16 X 1-7/8" AR Lockwasher, 3/8" 2 Spacer, 7/8" -13/32" X 1/8" Thick 2 Bolt, 3/8" -24 X 3-1/4" AR Lockwasher, 3/8" 1 Bolt, 3/8" -16 X 3-3/4" AR Lockwasher, 3/8" M6-5-60.11(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Valve Operating Mechanism M6-5-60.12 M6-5-60.12(1 of 2) TM 10-3950-263-14&P-3 Parts List Valve Operating Mechanism - Continued REF. PART NO. QTY. DESCRIPTION 1 5150325 12 Bolt 2 5150324 12 Bracket, Rocker Arm Shaft 3 5111340 6 Arm Assembly (Left), Exhaust Valve Rocker 4 5150311 1 Bushing, Exhaust Valve Rocker Arm - Small 5 5122445 1 Bushing, Exhaust Valve Rocker Arm - Large 6 5123700 1 Bushing, Exhaust Valve Rocker Arm Clevis 7 5150314 1 Pin (Clevis End), Exhaust Valve Rocket Arm Clevis 8 5150312 1 Clevis (Push Rod End), Exhaust Valve Rocker Arm 9 5179954 6 Arm Assembly, Injector Rocker 4 5150311 1 Bushing, Injector Valve Rocker Arm - Small 5 5150318 1 Bushing, Injector Rocker Arm - Large 6 5123700 1 Bushing, Injector Valve Rocker Arm Clevis 7 5150314 1 Pin (Clevis End), Injector Valve Rocker Arm Clevis 8 5150312 1 Clevis (Push Rod End), Injector Valve Rocker Arm 10 5111343 6 Arm Assembly (Right), Exhaust Valve Rocker 4 5150311 1 Bushing, Exhaust Valve Rocker Arm - Small 5 5122445 1 Bushing, Exhaust Valve Rocker Arm - Large 6 5123700 1 Bushing, Exhaust Valve Rocker Arm Clevis 7 5150314 1 Pin (Clevis End), Exhaust Valve Rocker Arm Clevis 8 5150312 1 Clevis (Push Rod End), Exhaust Valve Rocker Arm 11 5150322 6 Shaft Assembly, Rocker Arm 12 5151272 1 Plug, 11/32" Dia. X 1/4" 13 5151601 18 Locknut 14 5150303 18 Retainer (Snap Ring), Push Rod 15 5150302 18 Seat, Push Rod Spring - Upper 16 5186858 18 Spring, Push Rod 17 5123250 18 Seat, Push Rod Spring - Lower 18 5128640 18 Rod, Push 19 5115087 18 Follower Assemblies, Cam 5195220 1 Roller Set, Cam Follower 20 5150298 6 Guide, Cam Follower 21 103319 12 Lockwasher, 1/4" 22 443603 12 Bolt, 1/4" -20 X 3/4" 23 5195167 24 Valve (30°) Exhaust 24 5111337 2 Lock (Halves), Exhaust Valve Spring 25 5117564 12 Guide, Exhaust Valve Bridge 26 5117565 12 Bridge Exhaust Valve 27 5129101 12 Screw (Adjusting) 28 5151601 12 Nut 29 5117563 24 Cap, Exhaust Valve Spring 30 5147347 24 Spring, Exhaust Valve 31 5117562 24 Seat, Exhaust Valve Spring 32 5129920 24 Seal 5199913 AR Installer, Exhaust Valve Seal 33 5129919 24 Guide, Exhaust Valve 34 5172757 24 Insert, Exhaust Valve M6-5-60.12 (2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Rocker Cover And Ventilating System M6-5-60.13 REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 * PART NO. 5104515* 5104514 5104015 5103636 5103648 145382 * 5106858* 5103798 5104019*# 5103636 5101760 5103647 5103632 5149512 QTY. DESCRIPTION 4 Isolator, Rocker Cover Bolt 4 Washer 4 Bolt, Rocker Cover 1 Seal 1 Cover, Breather 4 Screw, #8 X 3/8" Drive 2 Retainer, Rocker Cover Nameplate 1 Cover, 671 - Cast Rocker 1 Gasket, 671 - Cast Rocker Cover 1 Retainer 1 Element 1 Retainer 3 Screw, #10 AR Installation Kit, Cast Rocker Cover 26095 AR Part Of Cylinder Head Overhaul Gasket Kit (5193118) See M6-5-60.4 26095 M6-5-60.13(1 of 1) TM 10-3950-263-14&P-3 Parts List Fuel Injector M6-5-60.14 M6-5-60.14(1 of 2) TM 10-3950-263-14&P-3 Parts List Fuel Injector - Continued REF. PART NO. 1 2 179847 3 5150250 4 5121259 5 6 7 5228785 8 5228104 9 5228739 10 5228608 11 5226414* 12 5228588 13 5226186* 14 5228587* 15 5228583 5226912 16 5226416 17 5226400 18 5226719 19 5228586 20 5228694 21 5228696 22 5228596** 23 5228766** 24 5228594 25 5229026 26 5228109 27 5229167* 28 5228601 29 5228668 5226393 QTY. DESCRIPTION 12 Pipe Assembly, Fuel See M6-5-60.16 6 Bolt, Injector Clamp, 3/8" -16 X 2" 6 Washer 6 Clamp, Injector 12 Connector, Fuel Pipe - See M6-5-60.16 12 Washer, Fuel Pipe Connector - See M6-5-60.16 6 Injector Assembly (N55) 1 Follower, Injector 1 Spring, Injector Plunger 1 Pin, Injector Stop 2 Cap, Injector Shipping 2 Cap, Injector Fuel 2 Gasket, Injector Filter Cap 1 Element (Inlet Side Only), Injector Filter 1 Body Assembly, Injector 2 Plug, Body 1 Dowel 1 Gear, Injector 1 Rack Assembly, Injector 1 Retainer, Injector Gear 1 Valve, Injector Check 1 Cage, Injector Check Valve 1 Spring, Injector Valve 1 Seat, Injector Valve Spring 1 Cage, Injector Valve Spring 1 Tip Assembly (N55), Injector Spray 1 Deflector, Injector Spill 1 Ring, Injector Seal 1 Nut, Injector Valve 1 Plunger And Bushing Assembly (N55), Injector 1 Pin, Bushing Guide FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 * 5229649 AR Service Kit, Injector - Consists Of All Items Marked With A Single Asterisk (*). 26095 ** 5228769 AR Valve Kit, Injector - Consists Of All Items Marked With A Double Asterisk (**). 26095 M6-5-60.14(2 of 2) TM 10-3950-263-14&P-3 Parts List Fuel Pump REF. PART NO. 1 5199561 2 5230007 3 5131685 4 5113776 5 141195 6 5174975* 7 3719219 8 5134628 5198553 9 5181747 10 147481* 11 5178700* 12 5174973 13 103709 14 5184530 15 5174971 16 5161003 17 5145009 18 5150193** 19 5102257 M6-5-60.15 QTY. DESCRIPTION 1 Pump Kit, Fuel 2 Seal, Fuel Pump Oil 3 Bolt, 5/16" -18 X 3/4" 1 Body, Fuel Pump 2 Pin, 1/4" X 5/8" Dowel 1 Gear, Fuel Pump 8 Bolt, 1/4" -20 X 3/4" (w/Lockwasher) 1 Cover, Fuel Pump 1 Bushing, 3/8" X 1/4" 1 Shaft Assembly, Fuel Pump Driven (w/Gear) 1 Ball, 1/8" Dia. Steel 1 Shaft (Drive), Fuel Pump 1 Valve, Fuel Pump 1 Pin, 5/32" X 1" Straight 1 Spring, Fuel Pump Valve Retaining 1 Plug, Fuel Pump Valve 1 Gasket, Fuel Pump Valve Plug 2 Plug, 1/8" Pipe 1 Gasket, Fuel Pump To Engine 1 Fork, Fuel Pump Coupling M6-5-60.15(1 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Fuel Pump - Continued REF. PART NO. * ** 5181746 QTY. DESCRIPTION FSCM No. 1 Shaft Assembly (Drive), Fuel Pump - Consists Of All Items Marked With A Single Asterisk (*) AR Part Of Installation Blower Kit (5192754) In M6-5-20.21 M6-5-60.15(2 of 2) 26095 TM 10-3950-263-14&P-3 Parts List Fuel Filter, Fuel Connections, And Fuel Lines M6-5-60.16 M6-5-60.16(1 of 2) TM 10-3950-263-14&P-3 Parts List Fuel Filter, Fuel Connections, And Fuel Lines - Continued REF. PART NO. QTY. DESCRIPTION 1 5117369 12 Connector, Fuel Pipe 5125108 12 Washer, Fuel Pipe Connector 2 5111527 6 Pipe Assembly, Long Fuel 3 5111526 6 Pipe Assembly, Short Fuel 4 193004 1 E1 bow, 3/8" Inverted Flared Tube 900 442323 1 Connector, 3/8" Inverted Flared Tube 5 5123063 1 Tube, Filter To Cylinder Head 6 5133083 1 Bracket, Fuel Filter Mounting 179838 2 Bolt, 3/8" -16 X 7/8" 179839 2 Bolt, 3/8" -16 X 1" 103341 AR Washer, 3/8" Flat 106263 AR Washer, 7/16" X 1" X .083" Flat 103321 AR Lockwasher, 3/8" 7 5148023 1 Cover Fuel Strainer (Spin-on) 5145014 2 Plug, 3/8" Pipe 181377 2 Bolt, 3/8" -24 X 1-1/4" 103321 AR Lockwasher, 3/8" 117049 2 Nut, 3/8" -24 Hex 8 5113207 1 Bracket, Fuel Strainer Mounting 5157412 2 Spacer, 7/8" X 1/4" 5164294 2 Spacer, 7/8" X 13/32" X 1/8" 5164789 2 Spacer, 7/8" X 13/32" X 3/8" 179839 2 Bolt, 3/8" -16 X 1" 103321 2 Lockwasher, 3/8" 9 2501776 1 Cartridge, Fuel Strainer (Spin-On) 6436060 1 Decal, Fuel Strainer (Spin-On) 10 5135308 1 Valve, Fuel Supply Check 111316 1 Elbow, 3/8" Street 90° 11 5176522 1 Elbow, 1/2" Sealastic 12 5134961 1 Tube, Strainer To Fuel Pump 13 5153473 1 Clip, Strainer To Fuel Pump Tube 1/2" 3292532 1 Spacer, 13/32" X 7/8" X 7/16" 191637 1 Bolt, 3/8" -24 X 5-3/4" 103321 1 Lockwasher, 3/8" 14 5123508 1 Tube, Fuel Pump To Filter 15 5138305 1 Connector, 3/8" Sealastic 5179938 1 Seal Ring, 3/8" Sealastic 16 1 Fuel Pump - See 6M-5-60.15 17 5176521 1 Connector, 1/2" Tube Sealastic 5176524 2 Seal Ring, 1/2" Sealastic 18 5178450 1 Clip, Fuel Drain 5/16" Tube 19 5123057 1 Tube, Fuel Drain 20 5128927 1 Elbow, Restricted (.080") 9432264 1 Connector, 5/16" Inverted Flared Tube 21 5138293 1 Elbow, 3/8" Sealastic 5179938 1 Seal Ring, 3/8" Sealastic 22 5148171 1 Cover, Fuel Filter (Spin-On) 5145010 2 Plug, 1/4" Pipe 23 2510778 1 Cartridge, Fuel Filter (Spin-On) 6439099 1 Decal, Fuel Filter (Spin-On) M6-5-60.16 (2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.17 Parts List Mechanical Governor M6-5-60.17(1 of 5) TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 5144138 1 Governor Assembly 1 5150889**# 1 Gasket, Governor Cover 5127576 1 Cover Assembly, Governor (Complete) 2 5176557 1 Seal Ring 5197151 AR Washer (Seal Ring Spacer) 3 5144177 2 Retainer 4 5153060 1 Retainer, Governor Throttle Shaft Packing 5 148402 2 Bearing, Governor Throttle Shaft 6 5174425 1 Shaft Assembly, Governor Throttle 7 9417126 3 Screw And Lockwasher, 1/4" -20 X 3/4" Fillister Head 8 186647 1 Bolt, 1/4" -20 X 1" 9 103319 1 Lockwasher, 1/4" 10 5100844 1 Lever, Governor Cover Throttle Shaft 11 5129710 1 Spring, Governor Throttle Lever Return 12 453007 1 Screw 5150941 1 Washer, 5/16" Flat 13 120392 1 Lockwasher, 1/4" 14 5158904 1 Housing Assembly, Governor Control 15 5158820 1 Shaft Assembly, Governor Operating (Includes Fork And Lever) 16 5154438 1 Shaft Assembly, Governor Operating 17 5154435 1 Shaft, Governor Operating 18 5159080 1 Washer 19 9431894 1 Bearing, Governor Operating Shaft (Upper) 20 5154422 1 Lever, Governor Operating Shaft 21 5150898 1 Screw (Gap Adjustment) 22 114492 1 Nut, 1/4" -28 Hex. 23 5150943 1 Pin, Governor Operating Shaft Lever 24 5150894 1 Pin, Governor Differential Lever 25 142583 1 Retainer, 13/64" 26 5150941 1 Washer 27 5150394 1 Lever Assembly, Governor Differential 28 5185605 1 Fork, Governor Operating Shaft 29 148403 1 Bearing, Governor Operating Shaft (Lower) 30 142656 1 Plug, 3/4" Expansion 31 5100991 1 Housing, Governor Control 5101197 1 Screw, Adjusting 124925 1 Nut, 3/8" -24 Jam 5150942 2 Pin, Dowel 32 124925 1 Nut, 3/8" -24 Hex. 33 5177083 1 Screw Assembly (With Spring), Governor Buffer 34 5150942 2 Pin, Dowel 35 5174445 1 Housing And Weight Assembly, Governor 36 5174449 1 Carrier And Weight Assembly, Governor 37 5174455 2 Weight Assembly, Governor 38 447196 2 Bearing, Needle 39 5174456 1 Weight 40 5185154 2 Shaft, Governor Weight 41 5178581 4 Ring, Retainer 42 5151487 8 Washer 43 5174453 1 Shaft And Carrier Assembly, Governor Weight 44 5185606 1 Carrier, Governor Weight 45 5150925 1 Shaft, Governor Weight Carrier M6-5-60.17(2 of 5) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued M6-5-60.17 M6-5-60.17(3 of 5) TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 46 5154503 1 Riser, Governor 47 451905 1 Bearing, Governor Weight Riser Thrust 48 5143023 1 Housing, Governor Weight 5150246 1 Gasket, Governor To Blower 49 907674 1 Bearing, Governor Weight Shaft End 50 5150941 1 Washer 51 5150884 1 Screw 5150897 1 Lockwasher 52 5165221 1 Gasket, Governor Weight Housing Cap 53 5183268 1 Cap, Governor Weight Housing 54 5166265 1 Elbow, Restricted 55 190910 4 Bolt, 1/4" -20 X 2-3/8" 56 103319 4 Lockwasher, 1/4" 57 5176834 1 Tube Assembly, Governor Bearing Lubrication 58 9432337 1 Elbow, 1/4" Inverted Flared Tube 90° 59 5150890** 1 Gasket, Governor Weight Housing Cover 60 5139262 1 Housing Assembly, Governor Variable Speed Spring 61 5143665* 1 Washer 62 5176557* 1 Ring, Seal 63 148402* 2 Bearing, Governor Variable Speed Spring Lever Shaft 64 103904 2 Key, 3/32" X 1/2" Woodruff 65 5173964 1 Shaft, Governor Variable Speed Spring Lever 66 5145444 1 Housing, Governor Variable Speed Spring 67 5126789* 1 Plug, 5/8" Expansion 68 5143564* 1 Screw, 1/4" -20 X 1-1/2" Set 69 5139469* 1 Lever Assembly, Governor Variable Speed Spring 70 9425165* 1 Pin 71 5139468* 1 Bearing 72 9417926 1 Screw Assembly, 1/4" -20 X 3/4" Fillister Head 73 5145446 1 Cover 74 5145445 1 Gasket 75 100129 2 Bolt, 5/16" -18 X 3-1/2" 76 103320 2 Lockwasher, 5/16" 77 5152944* 1 Gasket, Governor Variable Speed Spring Housing 78 5137276* 1 Retainer, Governor Variable Speed Spring 79 5136590* 6 Shim(.010") 80 5136591* 6 Shim(.078") 81 5111981 1 Spring, Governor Variable Speed 82 5152938 1 Plunger, Governor Variable Speed Spring 83 5152939 1 Guide, Governor Variable Speed Spring Plunger 84 5171784 1 Stop (With Step), Governor Variable Speed Spring Retainer 85 5174430 1 Stop (With Gap), Governor Variable Speed Spring 26095 Retainer 86 120380 2 Lockwasher, 1/4" 87 443603 * 2 Bolt, 1/4" -20 X 3/4" 88 5123812 # 1 Gasket, Governor To Cylinder Head 89 5150900# 1 Gasket, Governor To Breather Hole Cover 90 3223193 1 Cover, Governor Breather Hole 91 120217 2 Lockwasher, #10 92 120687 2 Screw, #10 -24 X 1/2" Fillister Head M6-5-60.17(4 of 5) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Mechanical Governor - Continued REF. PART NO. QTY. DESCRIPTION 93 5118219 6 Bolt (With Sealwasher) M6-5-60.17 FSCM No. 26095 * 5193544 1 Lever Kit - Consists Of Items Marked With A Single Asterisk (*). 26095 ** 5193118 AR Part Of Cylinder Head Overhaul Gasket Kit (5193118) In M6-5-60.4 26095 AR Part Of Installation Blow Kit (5192754) In M6-5-60.21 26095 # M6-5-60.17(5 of 5) TM 10-3950-263-14&P-3 M6-5-60.18 Parts List Injector Controls REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 5195810 5130509 5150263 142486 5150259 5147345 103361 142583 5150941 5150990 186676 120380 5115922 5115322 5176228 5130509 2090519 QTY. 1 1 1 1 1 1 1 1 1 1 4 4 1 6 12 1 1 15 186647 120380 5136159 2 2 1 DESCRIPTION Tube Assembly, Injector Control Bracket, Injector Control Tube Lever, Injector Control Tube End Pin, 1/8" X 3/4" Groove Shaft, Injector Control Tube End Pin 26095 Pin, 1/16" X 1/2" Cotter Retainer, 13/64" Spring Washer 26095 Link, Injector Control Tube To Governor Bolt, 1/4" -20 X 5/8" Lockwasher, 1/4" Spring, Injector Control Tube Lever, Injector Control Tube Rack Screw 26095 Bracket, Injector Control Tube Arm, Injector Control Tube (Torque Limit Control) - See Note Bolt, 1/4" -20 X 1" - See Note Lockwasher, 1/4" - See Note Plate, Injector Control Tube Lever (Load Limit Adjustment) - See Note M6-5-60.18(1 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Injector Controls - Continued REF. PART NO. QTY. DESCRIPTION 16 17 18 114493 5178817 1 1 2 FSCM No. Nut, 5/16" -24 Hex. - See Note Screw (Load Limit Adjusting), Injector Control Tube Lever Plate - See Note Bolt, See M6-5-60.12 Note: Items Are Used Together To Provide Load Limit Adjustment Used With Mechanical Governor M6-5-60.18(2 of 2) 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.19 Parts List Throttle Controls REF. 1 2 3 4 5 6 7 8 9 10 PART NO. QTY. 5171429 5171045 5123881 186647 103319 5161464 5150941 142583 100659 3290569 123298 103319 121902 5146238 110730 122236 5172499 5172501 179835 103321 5172502 120375 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 DESCRIPTION FSCM No. Nut, Throttle Booster Support Bolt, 5/16" -24 X 5/8" Lever, Governor Control Bolt, 1/4" -20 X 1" Lockwasher, 1/4" Pin, Governor Control Wire Swivel Washer Retainer, 13/64" Spring Screw, #10 -32 X 3/8" Fillister Head Clip, Governor Control Wire Tube Bolt, 1/4" -28 X 3/8" Lockwasher, 1/4" Nut, 1/4" -28 Hex Wire Assembly, Governor Control Lockwasher, 3/8" Nut, 3/8" -24 Hex Spring, Throttle Booster Bracket, Throttle Booster Spring Bolt, 3/8" -16 X 5/8" Lockwasher, 3/8" Eye, Throttle Booster Adjusting Nut, 1/4" -20 Hex M6-5-60.19(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.20 Air Inlet Housing REF. PART NO. QTY. 3 4 5 6 7 8 5147607 5147305 5142549 5121182 5113633 5112785 120392 180034 120380 5111904 1 1 2 1 1 1 1 1 1 1 9 10 11 12 13 5122623 5114974 5128593 273436 5112787 1 1 1 2 1 14 15 16 17 18 5172030 5182977 273436 9414322 179844 1 2 1 1 4 1 2 DESCRIPTION FSCM No. Housing Assembly, Air Inlet Housing, Air Inlet Plug, 3/4" Pipe Plug, 1/4" Pipe Spacer Latch Washer, 1/4" Flat Bolt, 1/4" -20 X 1-1/2" Lockwasher, 1/4" Spring (Internal), Air Inlet Housing Shutdown Valve Tension Cam Handle Shaft, Air Inlet Housing Shutdown Valve Pin Spring (External), Air Inlet Housing Shutdown Valve Tension Valve, Air Inlet Housing Shutdown Seal Ring, Air Inlet Housing Shutdown Valve Shaft Pin, 3/8" X 11/16" Roll Washer, 3/8" Flat Bolt, 3/8" -16 X 1-5/8" M6-5-60.20(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Air Inlet Housing - Continued REF. PART NO. QTY. DESCRIPTION 19 20 21 * 179847 179849 103321 3290572* 3290399 1 1 6 1 1 AR FSCM No. Bolt, 3/8" -16 X 2" Bolt, 3/8" -16 X 2-1/2" Lockwasher, 3/8" Gasket, Air Inlet Housing Striker Plate Plate, Air Inlet Housing Striker Part Of Installation Blower Kit (5192754) M6-5-60.20(2 of 2) 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.21 Parts List Blower And Blower Shaft M6-5-60.21(1 of 3) TM 10-3950-263-14&P-3 Parts List Blower And Blower Shaft - Continued REF. PART NO. QTY. DESCRIPTION 1 5138553 1 Blower Assembly 26095 5179045 1 Plug, Blower Rotor Shaft 5150829 1 Plug, 7/8" Cup 2 5138725 1 Housing, Blower 3 5138710* 4 Seal, Blower Housing End Plate 4 117296 4 Screw 5/16" -18 X 1-1/2" Fillister Head 5 7451054* 2 Bearing, Blower Rotor Front 6 5179017 2 Retainer, Blower Rotor Front Bearing 7 120380 6 Lockwasher, 1/4" 8 443603 6 Bolt, 1/4" -20 X 3/4" 9 138234 1 Bolt, 5/16" -24 X 1-1/2" Hex. Socket Head 10 5114726* 2 Gasket, Blower Housing End Plate Cover 11 103320 20 Lockwasher, 5/16" 12 179828 20 Bolt, 5/16" -18 X 2-1/2" 13 5114442 1 Cover (Front), Blower Housing End Plate 14 5122069 1 Coupling, Blower To Water Pump Drive 15 5193719 2 Plate Assembly, Blower Housing End 5114528 2 Pin, Dowel 16 5120726 1 Cover (Rear), Blower Housing End Plate 17 5173363** 3 Bolt, (Plate To Gear) 18 103320** 6 Lockwasher, 5/16" 19 120393** 6 Washer, 5/16" Flat 20 5173366** 1 Hub, Blower Rotor Gear 21 5173362** 3 Bolt, (Plate To Hub) 22 182776 2 Bolt, 1/2" -20 X 1-1/4" 23 5154398 2 Lockwasher, 1/2" 24 5154400 1 Washer, Blower Rotor Gear Retaining 25 5192234 1 Gear Set (Rotor Timing), Blower Rotor 26 443603 6 Bolt, 1/4" -20 X 3/4" 27 103319 6 Lockwasher, 1/4" 28 5179017 2 Retainer, Blower Rotor Rear Bearing 29 954418* 2 Bearing, Blower Rotor 30 5138558 1 Rotor Assembly (Upper, Right Hand Helix), Blower 5150216 1 Shaft, Blower Rotor 142522 2 Pin, 1/4" X 1-3/4" Groove 31 5138560 1 Rotor Assembly (Lower, Left Hand Helix), Blower 5150216 1 Shaft, Blower Rotor 142522 2 Pin, 1/4" X 1-3/4" Groove 32 5150372* AR Shim (.002"), Blower Rotor Gear 5153938* AR Shim (.003"), Blower Rotor Gear 5150855* AR Shim (.005"), Blower Rotor Gear 5150856* AR Shim (.010"), Blower Rotor Gear 33 5154401 1 Disc, Blower Rotor Fuel Pump Coupling 34 5173364** 3 Spacer, Blower Rotor Gear Hub 35 5173365** 2 Plate, Blower Rotor Gear Hub 36 103320 6 Lockwasher, 5/16" 37 5150344 1 Coupling Assembly, Blower Drive 38 5150348 1 Cam, Blower Drive Coupling 39 5150346 4 Seat, Blower Drive Coupling Spring 40 5196314 1 Spring Pack, Blower Drive Coupling 41 5150345 1 Support, Blower Drive Coupling 42 5115989 1 Gear (Right Hand Helix, 39 Teeth), Blower Drive 43 5148810 1 Gasket, Blower Drive Gear Hub Support M6-5-60.21(2 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.21 Parts List Blower And Blower Shaft - Continued REF. PART NO. QTY. DESCRIPTION 44 103321 2 Lockwasher, 3/8" 45 181361 2 Bolt, 3/8" -24 X 7/8" 46 5152804 1 Nut, Blower Drive Gear Hub 47 5154640 1 Shaft, Blower Drive 1567727 1 Ring, Blower Drive Shaft 48 5138336 2 Clamp, Blower Drive Cover Packing 49 5172865 2 Seal, Blower Drive Cover 50 5118353 1 Cover, Blower Drive 51 5150281 1 Lockwasher, Blower Drive Gear 52 5158901 1 Washer, Blower Drive Gear Hub Thrust 53 444687 1 Plug, 1.8" Pipe 54 5222528 1 Support Assembly, Blower Drive Gear Hub 5122530 2 Bearing, Blower Drive Gear Hub Support 55 5122529 1 Washer, Thrust 56 169067 1 Ball, 7/32" Dia. Steel 57 5150279 1 Hub, Blower Drive Gear 58 5150349 1 Retainer, Blower Drive Coupling 59 5150350 6 Bolt 60 5115656** 1 Gasket, Blower 61 427570 8 Bolt, 7/16" -21 X 2" 62 5111881** 1 Screen, Blower 63 5150238 8 Washer, 7/16" * 5192796 AR Blower Kit, Repair - Consists Of Items Marked With A Single Asterisk (*). ** 5192751 1 Hub Kit, Blower Rotor Gear - Consists Of Items Marked With A Double Asterisk (**). ** 5192754 1 Blower Kit, Installation - Consists Of Items Marked With A Triple Asterisk (**) And Indicated Items In M6-5-60.51, -60.17, -60.20,-60.28 M6-5-60.21(3 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 Parts List Oil Pump, Oil Pressure Regulator, And Oil Distribution System M6-5-60.22(1 of 3) TM 10-3950-263-14&P-3 M6-5-60.22 TM 10-3950-263-14&P-3 Parts List Oil Pump, Oil Pressure Regulator, And Oil Distribution System - Continued REF. PART NO. QTY. DESCRIPTION 1 5118302 1 Cover, Oil Pump Inlet Screen 2 5153317 2 Bracket, Oil Pump Screen Support 3 181360 4 Bolt, 3/8" -24 X 3/4" 4 103321 4 Lockwasher, 3/8" 5 181342 2 Bolt, 5/16" -24 X 1-3/8" 6 103320 AR Lockwasher, 5/16" 7 121917 2 Nut, 5/16" -24 Hex 8 5174988 1 Pipe, Oil Pump Inlet 9 186629 2 Bolt, 5/16" -18 X 1" 103320 2 Lockwasher, 5/16" 10 5153284 1 Retainer, Oil Pump Inlet Screen 11 5153286 1 Screen, Oil Pump Inlet 12 5175980 1 Pump Assembly, Oil 13 5153299 1 Cover Assembly, Oil Pump 14 5153154* 1 Bushing, Oil Pump Cover 15 186624 4 Bolt, 5/16" -18 X 1-1/4" 16 103320 4 Lockwasher, 5/16" 17 5153260* 1 Gear, Oil Pump Drive 18 5153310* 1 Shaft, Oil Pump Driven Gear 19 5153247 1 Valve, Oil Pump Relief 20 5155765* 1 Spring, Oil Pump Relief Valve 21 105456*# 2 Gasket, Oil Pump Relief Valve 22 5152613 2 Plug, Oil Pump Relief Valve 23 5153309* 1 Shaft, Oil Pump Drive 24 5156683* 1 Gear Assembly, Oil Pump Idler 5156521* 1 Bushing, Oil Pump Idler Gear 25 443230 1 Pin, 1/8" X 3/8" Groove 26 5175944 1 Washer(Small) 27 186625 1 Bolt, 5/16" -18 X 7/8" 28 5169197 1 Washer(Large) 29 5156528* 1 Gear, Oil Pump Drive (On Pump) 30 9409079 1 Bolt, 3/8" -16 X 7/8" 31 5176035 1 Dowel 5169195 1 Support, Oil Pump Idler Gear 32 103905 2 Key, 1/8" X 5/8" Woodruff 33 179816 2 Bolt, 5/16" -18 X 3/4" 34 103320 2 Lockwasher, 5/16" 35 5156955 1 Cover, Oil Pump Pad 36 5151370*# 1 Gasket, Oil Pump Pad Cover 37 5169193 1 Body Assembly, Oil Pump 5153147* 2 Bushing, Oil Pump Body 38 5153617* 1 Gear Assembly, Oil Pump Driven 5153154* 2 Bushing, Oil Pump Driven Gear 39 5176119 AR Shim(.005"), Oil Pump 40 103321 4 Lockwasher 186627 4 Bolt, 3/8" -24 X 1" 41 5153313# 1 Gasket, Oil Pump Inlet Pipe 42 5154199# 1 Gasket, Oil Pressure Regulator Body 43 5159384 1 Regulator Assembly, Oil Pressure 44 5156816 1 Plug, Oil Pressure Regulator 45 5120082 1 Valve, Oil Pressure Regulator 46 5159382 1 Body, Oil Pressure Regulator 47 5156815 1 Spring, Oil Pressure Regulator M6-5-60.22(2 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 62095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Oil Pump, Oil Pressure Regulator, And Oil Distribution System - Continued REF. 48 49 50 51 52 53 54 55 56 * PART NO. 103320 179819 5151370 103320 186625 5159388 179824 5153313# 225810 120401 1 5150431 9432337 5145009 5194801 # 5192108 57 58 59 QTY. DESCRIPTION 2 Lockwasher, 5/16" 2 Bolt, 5/16" -18 X 1-1/8" 1 Gasket (At Block), Oil Pump Outlet Pipe AR Lockwasher, 5/16" 2 Bolt, 5/16" -18 X 7/8" 1 Pipe, Oil Pump Outlet 2 Bolt, 5/16" -18 X 1-3/4" 1 Gasket (At Pump), Oil Outlet Pipe 1 Elbow, 1/4" Inverted Flared Tube 900 1 Elbow, 1/8" Street 900 Support, Blower Drive Gear Hub - See M6-5-60.21 1 Pipe, Blower Drive Bearing Oil 1 Elbow, 1/4" Inverted Flared Tube 90°, 1/4" Pipe Thread 1 Plug, 1/8" Pipe AR Overhaul Kit, Oil Pump - Consists Of Items Marked With A Single Asterisk(*) AR Gasket Kit, Oil Pump Overhaul - Consists Of Items Marked With A Single (#) And Indicated Items In M6-5-60.27 M6-5-60.22(3 of 3) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.23 Parts List Oil Filter REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 5573162 5194288 5120740 643798 5574008 5570480 5187308 5154538 5157310 5187309 122366 5573014 5571024 5133431 5133594 5575086 5126686 QTY. 1 1 1 1 1 1 1 11 1 1 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION Decal (Full Flow Filter) Filter Assembly (Full Flow) Oil Stud, Oil Filter Center Gasket, Oil Filter Cover Nut Shell, Oil Filter Plug Spring, Oil Filter Washer Gasket, Retainer Retainer, Oil Filter Spring Nut, 5/8" -16 Hex Element, Oil Filter Gasket, Oil Filter Cover Adapter, Oil Cooler - See M6-5-60.24 Valve, Oil Cooler By-Pass - See M6-5-60.24 Spring, Oil Cooler By-Pass Valve - See M6-5-60.24 Plug, Oil Cooler By-Pass Valve - See M6-5-60.24 Gasket, Oil Cooler By-Pass Valve Plug - See M6-5-60.24 Valve, Oil Filter By-Pass Spring, Oil Filter By-Pass Valve Gasket, Oil Filter By-Pass Plug Plug, Oil Filter By-Pass M6-5-60.23(1 of 1) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.24 Parts List Oil Cooler REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. QTY. 5154215 8539953 5150155 5174941 190367 8514600 186612 103321 5123636186624 103320 5150154 5177777* 5177778* 5177773* 5177772* 5152904 186619 103321 518862 274682 103320 2 1 2, 1 1 1 3 AR 1 4 AR 2 1 1 1 1 1 3 AR 1 6 AR DESCRIPTION FSCM No. Gasket, Oil Cooler Core Outer Core Assembly (8 Plate), Oil Cooler Gasket, Oil Cooler Core Inner Housing, Oil Cooler 90° Elbow, 1/4" Street Core Assembly (12 Plate), Oil Cooler Bolt, 3/8" -16 X 1-3/8" Lockwasher, 3/8" Adapter, Oil Cooler Bolt, 5/16" -18 X 1-1/4" Lockwasher, 5/16" Gasket, Oil Cooler Adapter To Block Valve, Oil Cooler By-Pass Spring, Oil Cooler By-Pass Gasket, Oil Cooler By-Pass Plug Plug, Oil Cooler By-Pass Gasket, Oil Cooler Adapter To Block Bolt, 3/8" -16 X 1-1/8" Lockwasher, 3/8" Cover, Oil Cooler Housing Bolt, 5/16" -18 X 7-3/4" Lockwasher. 5/16" M6-5-60.24(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Oil Cooler - Continued REF. PART NO. QTY. 18 19 * 5177241 5115214 5145014 186624 103320 5153902 103647 1 1 2 2 2 1 1 1 DESCRIPTION FSCM No. Flange, Oil Cooler Water Hole Plug, 1/2" Pipe Plug, 3/8" Pipe Bolt, 5/16" -18 X 1-1/4" Lockwasher, 5/16" Gasket, Oil Cooler Water Hole Flange Draincock, 1/4" Part Of Oil Filter Assembly (5194288) See M6-5-60.23 M6-5-60.24(2 of 2) 26095 56095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.25 Parts List Oil Filler REF. 1 2 3 4 5 PART NO. QTY. 5117362 5113825 5146248 5108671 5150147 1 1 2 1 1 DESCRIPTION FSCM No. Cap, Oil Filler Tube Chain, Oil Filler Tube Hook, Oil Filler Cap Tube, Oil Filler Strainer, Oil Filler Tube M6-5-60.25(1 of 1) 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.26 Parts List Dipstick REF. 1 2 3 PART NO. QTY. 5148219 5151430 5145515 1 1 1 DESCRIPTION FSCM No. Dipstick 26095 Guide, Dipstick Adapter 26095 26095 M6-5-60.26(1 of 1) TM 10-3950-263-14&P-3 M6-5-60.27 Parts List Oil Pan REF. 1 2 3 4 5 6 7 * PART NO. QTY. 5150117* 5174986 5148436 5145014 122432 5112605 840277* 1 1 34 1 1 1 2 AR DESCRIPTION FSCM No. Gasket, Oil Pan To Block Pan, Oil Bolt, (w/Lockwasher), 5/16" -18 X 3/4" Plug, Oil Pan Drain 3/8" Square Head Pipe Nut, 7/8" -14 Hex Tube Assembly, Oil Pan Drain Gasket (w/18mm Plug), Oil Pan Drain Plug Part Of Oil Pump Overhaul Gasket Kit (5192108) See 6-5-60.22 M6-5-60.27(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.28 Parts List Live Mast Lines - Continued REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 5149368 5114011* 5136671*# 5189041*# 5182070 5102258 5186572*# 5134335* 5186571*# 5186570*# 5178273*# 118536 5150193*@# 5150191# 5178274 179819 103320 QTY. 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 2 2 DESCRIPTION FSCM No. Pump Assembly, Fresh Water Thrower, Fresh Water Pump Shaft Assembly, Fresh Water Pump Slinger, Fresh Water Pump Shaft Body Assembly, Fresh Water Pump Stud, Fresh Water Pump Body Insert, Fresh Water Pump Body Impeller, Fresh Water Pump Seal Assembly, Fresh Water Pump Spring, Fresh Water Pump Seal Gasket, Fresh Water Pump Cover Draincock, 3/8" Gasket, Fresh Water Pump Coupling, Blower To Water Pump Drive - See M6-5-60.21 Bolt - See M6-5-60.21 Packing, Fresh Water Pump Outlet Flange Bolt, 5/16" -18 X 1-1/8" Lockwasher, 5/16" M6-5-60.28(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Water Pump - Continued REF. PART NO. QTY. 5118219 3 * 5198308 AR # 5193605 AR @ AR DESCRIPTION FSCM No. Following Item Not Shown Bolt(w/Seal Washer) Used To Attach Pump To Blower Assembly Reconditioning Kit, Fresh Water Pump - Consists Of Items Marked With A (*). Replacement Kit, Fresh Water Pump Seal - Consists Of Items Marked With A (#). Part Of Installation Blower Kit (5192754) See M6-5-60.21 M6-5-60.28(2 of 2) 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.29 Parts List Water Pump Cover REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 5179386 120380 5102258 111612 5118149 179816 103320 5150364 5153902 5156770* 5188036* 1 1 4 4 2 1 2 2 1 1 1 1 AR DESCRIPTION FSCM No. Gasket, Water Pump Cover - See M6-5-60.28 Cover, Water Pump Lockwasher, 1/4" Bolts, 1/4" -20 X 3/4" Clamp, 1-3/8" Hose, Water By-Pass Tube Connecting Bolt, 5/16" -18 X 3/4" Lockwasher, 5/16" Cover, Water By-Pass Tube Gasket, Water By-Pass Tube Cover Seal, Water Pump Inlet Clamp, Water Pump Inlet Seal Part Of Installation Blower Kit (5192754) See M6-5-60.21 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 M6-5-60.29(1 of 1) Parts List Water Outlet Manifold TM 10-3950-263-14&P-3 M6-5-60.30 M6-5-60.30 REF. 1 2 3 4 5 6 7 PART NO. QTY. 5101772 117049 103321 5150362 5150361* 5142549 5115214 1 12 12 8 6 1 5 5117344 5101377 2 4 AR DESCRIPTION FSCM No. Manifold, Water Outlet Nut, 3/8 -24 Hex Lockwasher, 3/8" Stud, 3/8" -16-24 X 1-11/16" Gasket, Water Outlet Manifold Plug, 3/4" Pipe Plug, 1/2" Pipe Following Items Are Not Shown Cover, Water Outlet Manifold Hole Stud, Water Outlet Manifold Hole Cover Part Of Cylinder Head Overhaul Gasket Kit (5193118) See M6-5-60.4 M6-5-60.30(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60-31 Thermostat And Water By-Pass Tube REF. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. QTY. DESCRIPTION FSCM No. 5169478* 5131182 5145014 5178833 5186260 103320 179828 103647 5186211 179846 5157702 5160425 1 2 1 2 1 1 4 4 1 1 1 1 1 Manifold, Water Outlet - See M6-5-60.30 Gasket, Water By-Pass Tube (Upper) Plug, 1/4" Pipe Plug, 3/8" Pipe Thermostat Assembly (173° Opening Temp) Elbow, Water Manifold Outlet Lockwasher, 5/16" Bolt, 5/16" -18 X 2-1/2" Draincock, 1/4" Tube Assembly, Water By-Pass - See Note Bolt, 3/8" -16 X 1-7/8" Clip, Water By-Pass Tube Spacer 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 AR Part Of Cylinder Head Overhaul Gasket Kit (5193118) - See M6-5-60.4 26095 Note: Includes Thermostat Housing M6-5-60.31(1 of 1) TM 10-3950-263-14&P-3 Parts List M6-5-60.32 Radiator, Water Connections, And Fan Shroud REF. 1 2 3 4 5 PART NO. QTY. 5187231 5140952 3125617 186629 120393 103320 5197679 5169383 181374 103341 103321 117049 5108922 5109463 443603 179816 120392 103340 120393 103320 103319 5170058 1 1 1 10 10 10 1 1 4 4 4 4 1 1 6 2 6 2 2 2 6 6 DESCRIPTION FSCM No. Hose, Radiator Inlet Shell Assembly, Radiator Radiator Bolt, 5/16" -18 X 1" - See Note Washer, 5/16" Flat - See Note Lockwasher - See Note Cap (’7# Pressure), Radiator Filler Hose, Radiator Overflow Bolt, 3/8" -24 X 1-1/2" Washer, 3/8" Flat Lockwasher, 3/8" Nut, 3/8" -24 Hex. Shroud, Fan Guard, Fan Bolt, 1/4" -20 X 3/4" Bolt, 5/16" -18 X 3/4" Washer, 1/4" Flat Washer, 5/16" Flat Washer, 5/16" Flat Lockwasher, 5/16" Lockwasher, 1/4" Nut. 1/4" Speed M6-5-60.32(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Radiator, Water Connections, And Fan Shroud - Continued REF. PART NO. QTY. DESCRIPTION 6 7 8 9 10 5170684 111625 5199776 5188383 5163760 103321 179860 111622 1 4 2 1 1 2 2 2 Hose (Intermediate), Radiator Outlet Clamp, Radiator Outlet Hose Hose, Radiator Outlet Connection, Oil Cooler Water Inlet Gasket, Oil Cooler Water Inlet Connection Lockwasher, 7/16" Bolt, 7/16" -14 X 1-1/4" Clamp, Radiator Inlet Hose Note: Used To Connect Radiator To The Radiator Shell Assembly M6-5-60.32(2 of 2) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.33 Fan REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 5108434 5109642 120393 5100202 5164789 5150230 186288 5108436 103322 427564 5100984 7450630 5101000 5100916 455322 191758 5131122 5131095 5131124 5131125 5131126 7451080 QTY. 1 1 1 1 2 2 2 4 4 4 1 1 1 1 1 1 1 1 AR AR AR 1 DESCRIPTION FSCM No. Bolt, 5/16" -18 X 5" Fan Bracket Adjusting Bolt, 5/16" -18 X 7" Fan Bracket Adjusting Washer, 5/16" Flat Support, Fan Mounting Spacer Washer, 3/8" Flat Bolt, 3/8" -16 X 4-1/2" Washer, 7/16" Flat Lockwasher, 7/16" Bolt, 7/16" -14 X 1-3/8" Pulley And Hub Assembly Bearing (Rear), Fan Shaft Pulley (Hub), Fan Cap Bolt Fitting Spacer Retainer, Grease Shim (.015") Shim (.020") Shim (.025") Bearing (Front). Fan Shaft M6-5-60.33(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List Fan - Continued REF. PART NO. 15 16 17 18 19 20 21 22 23 5144798 5144797 5144796 5108219 5100201 9409060 5131123 186725 186646 5109949 103323 5171229 186643 103320 QTY. 1 2 1 1 1 1 1 1 2 AR 3 1 6 6 DESCRIPTION FSCM No. Cap, Fan Hub Spacer Spacer Seal, Fan Shaft Shaft (Includes Bracket), Fan Bolt, Fan Shaft Bearing, 1/2" -20 X 1-1/2" Lock Washer Bolt, 1/2" -13 X 1-1/2" Bolt, 1/2" -13 X 1-3/4" Washer, Flat Lockwasher, 1/2" Blade, Fan Bolt, 5/16" -18 X 2-1/16" Lockwasher, 5/16" M6-5-60.33(2 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.34 Exhaust Manifold And Connections REF. 1 2 3 4 5 6 7 8 9 10 * PART NO. QTY. DESCRIPTION FSCM No. 122013 103323 5162793 5108989 5108950 113175 5150195* 5120224* 5150196* 5120223* 5112899 5102735 5188273 127855 4 4 4 1 1 1 2 2 1 AR 7 2 5 7 Nut, 1/2" -20 Hex. Brass Lockwasher, 1/2" Stud, (1/2" X 1.76"), Exhaust Outlet Gasket, Exhaust Outlet Manifold, Exhaust Plug, 1/8" Brass Pipe Gasket (End), Exhaust Manifold Gasket (End)(Metal Clad), Exhaust Manifold Gasket (Intermediate), Exhaust Manifold Gasket (Intermediate) (Metal Clad), Exhaust Manifold Stud, Exhaust Manifold Crab Washer Washer Nut, 7/16" -20 Hex 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 AR Part Of Cylinder Head Gasket Kit (5193118) See M6-5-60.4 26095 M6-5-60.34(1 of 1) TM 10-3950-263-14&P-3 Parts List M6-5-60.35 Tachometer Drive REF. 1 2 3 PART NO. QTY. 179882 100146 5132715 5125153 3202615 3224992 849330 2071181 4 1 2 1 1 1 1 1 DESCRIPTION FSCM No. Bolt, 1/2" -13 X 1-1/8" Bolt, 7/16" -14 X 1" Washer Cover Assembly, Tachometer Drive Seal, Tachometer Drive Cover Shaft, Tachometer Drive Cap Washer, 7/16" M6-5-60.35(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.36 Wiring Harness REF. 1 PART NO. 5175004 5100108 3223197 122223 103322 5182722 181429 178627 178591 103323 117051 QTY. 1 AR AR 1 1 1 1 AR 1 1 1 DESCRIPTION FSCM No. Harness, Engine Wiring Fuse, Engine Wiring Harness 60 Amp Clip, Wiring Harness Bolt, 7/16" -14 X 5/8" Lockwasher, 7/16" Strap, Engine To Base Ground Bolt, 1/2" -20 X 1-1/4" Lockwasher, 5/8", External Tooth Lockwasher, 1/2", External Tooth Lockwasher, 1/2" Nut, 1/2" -20 Hex M6-5-60.36(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.37 Starting Motor REF. 1 2 3 4 PART NO. QTY. 1114081 9418228 223435 103325 5130995 1 1 2 3 1 DESCRIPTION FSCM No. Motor Assembly, Starting Bolt, 5/8" -11 X 1-3/4" (12 Point) Bolt, 5/8" -11 X 1-3/4" Lockwasher, 5/8" Gasket, Starting Motor M6-5-60.37(1 of 1) 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List M6-5-60.38 Battery Charging Generator REF. 1 2 3 4 5 6 7 8 PART NO. QTY. 186278 103321 5103096 5102964 442733 103323 5117082 5136448 1117641 9427945 103323 5132715 102637 5100672 193221 179867 103322 5141767 5141768 5133519 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 3 1 1 1 DESCRIPTION FSCM No. Bolt, 3/8" -16 X 2-5/8" Lockwasher, 3/8" Spacer Strap, Generator Mounting Bolt, 1/2" -13 X 1-1/4" Lockwasher, 1/2" Washer Pulley, Generator Generator, Battery Charging Bolt, 1/2" -13 X 6-1/4" Lockwasher, 1/2" Washer Nut, 1/2" -13 Bracket, Generator Bolt, 7/16" -14 X 1-1/4" (To Front Cover) Bolt, 7/16" -14 X 2-1/4" (To Block) Lockwasher, 7/16" Shim (.031") Shim (.010") Belt M6-5-60.38(1 of 1) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 Torque Converter - Manual Overcenter Input Disconnect Clutch M6-5-60.39(1 of 11) M6-5-60.39 TM 10-3950-263-14&P-3 Parts List REF. 1 2 3 4 5 6 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 R1183 Torque Converter - Manual Overcenter Input Disconnect Clutch - Continued PART NO. QTY. DESCRIPTION 6778507 6772611 6769080 5123897 6772609 6771375 6775097 6775110 6771389 6775111 6775106 6775107 6771407 6771376 6775061 6771382 6771407 6775108 6775109 907590 9413412 9425517 6775099 6775093 6775100 191758 114498 5193064 106649 6775556 6768826 6775555 179812 103320 6759863 907535 191758 114498 6771943 6768820 179841 103321 179867 103322 6759859 1 1 1 1 1 8 4 1 1 1 1 1 10 5 1 5 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 1 1 1 1 1 1 8 8 11 11 1 124556 6768822 181400 103322 186631 103323 2 1 2 2 8 8 1 Converter Assembly, Torque With Following Parts Nut Key Ring, 15" Clutch Driving Clutch Assembly Washer, Insulating Spring, Separating Hub Plate Disc Set, Driving Clutch (Matched Set of Three) Plate, Front Ring, Thrust Collar, Adjusting Ring, Snap Pin, Toggle Strap Toggle Assembly Set (Set of Five) Pin, Toggle Liner Ring, Snap Sleeve, Shift Collar Shift Bearing, Single Roll Ball Ring, Shift Sleeve External Snap Ring, Shift Collar Internal Snap Sleeve, Lock Pin Spring, Lock Pin, Lock Fitting, Grease (Type C) Nut, 5/8" -18 Hex. Jam Tube, Bearing Lube Elbow, 400 Street Housing Assembly, Disc Clutch Housing, Disc Clutch Bushing Bolt, 5/16" -18 X 1/2" Lockwasher, 5/16" Cover Bearing, Single Row Ball Fitting, Grease (Type C) Nut, 5/8" -18 Hex. Jam Tube, Bearing Lube Retainer, Bearing Bolt, 3/8" -16 X 1-1/4" Hex Lockwasher, 3/8" Bolt Lockwasher, 7/16" Shaft, Clutch Shifter Master Clutch Control - See Keysheet 6-17Key Yoke, Clutch Shifter Bolt, 7/16" -20 X 1-1/2" Lockwasher, 7/16" Bolt, 1/2" -13 X 2-1/4" Lockwasher, 1/2" Bearing, Clutch Pilot - See M6-5-60.8 M6-5-60.39(2 of 11) FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 M6-5-60.39 Torque Converter - Flex Disc And Flywheel REF. PART NO. QTY. 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 6772613 455072 6768688 6772612 6831424 6769079 6772220 443767 6838403 127909 6774184 6774285 9409131 6750259 903013 6772303 6772305 6772299 6772302 1 8 4 1 1 4 1 2 1 1 1 1 6 1 1 1 1 1 1 DESCRIPTION FSCM No. Housing Assembly, Converter Drive Bolt, 9/16" -18 X 1-3/8" Hex Lockstrip Shaft - See Note Ring, Seal Pin, Dowl - See Note Housing, Converter Drive - See Note Pin, Dowel - See Note Ring, Snap Bearing, Assembly, Roller Ring, Snap Hub, Drive Bolt, Self Locking, 3/8" -24 X 3/4" Hex Ring, Snap Bearing Retainer, Sprag Race, Outer Sprag Sprag Assembly Ring, Snap M6-5-60.39(3 of 11) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 Torque Converter M6-5-60.39(4 of 11) TM 10-3950-263-14&P-3 Parts List REF. 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 R1183 Torque Converter - Continued PART NO. QTY. DESCRIPTION 6772219 6756322 6772223 6775852 6837976 6772197 6772199 181365 6756570 907272 6756574 6880389 6772227 6830003 940937 6775643 6756764 1 1 1 10 10 1 1 12 6 1 1 1 1 30 30 1 1 M6-5-60.39 FSCM No. Turbine Assembly - Torque Converter Nut Stator Spring, Freewheel Roller Roller, Freewheel Race, Freewheel Roller, Inner Plate, Stator Backing Bolt, 3/8" -24 X 1-1/8" Hex. Strip, Locking Bearing, Converter Pump Double Row Ball Retainer, Converter Pump Bearing Ring, Converter Pump Seal Pump, Torque Converter Washer Bolt, Self Locking 3/8" -24 X 1-1/4" Hex. Ring, Seal Hub, Converter Pump M6-5-60.39(5 of 11) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 Torque Converter - Housing M6-5-60.39(6 of 11) TM 10-3950-263-14&P-3 Parts List REF. 88 89 90 91 92 93 94 85 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 R1183 Torque Converter - Housing - Continued PART NO. QTY. DESCRIPTION 6768481 6751502 6750186 6703138 179837 103321 6758025 6758019 6838494 145372 6759413 6752423 103323 6752415 6752414 141202 6751377 6768266 6777124 903304 6773522 6777103 6777105 1 1 1 1 2 2 1 1 1 4 2 1 1 1 1 1 1 1 1 1 1 3 3 M6-5-60.39 FSCM No. Seal, Converter Oil Gear, Pump Drive Gasket, Converter Housing Cover Cover, Converter Housing Bolt, 3/8" -16 X 3/4" Hex. Lockwasher, 3/8" Housing Assembly, Converter Housing, Converter - See Note Plate, Converter Name Screw, 4" X 1/4" Drive Ring, Converter Ground Sleeve Hook Type Seal Shaft, Pump Idler Gear Lockwasher, 1/2" Ring Seal 26095 Plug, 1-1/2" -8 Square Head Pin, Ground Sleeve Key Dowel Key, Converter Ground Sleeve Sleeve, Converter Ground Gear Assembly, Oil Pump Idler Bearing, Single Row Ball Gear, Pump Idler - See Note Washer 26095 Rivet, Flat Head M6-5-60.39(7 of 11) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 Torque Converter - Charging Oil Pump M6-5-60.39(8 of 11) TM 10-3950-263-14&P-3 Parts List REF. 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 R1183 Torque Converter - Charging Oil Pump - Continued PART NO. QTY. DESCRIPTION 6751733 103321 179842 6759444 6771236 6770415 9409954 6770416 6770417 6770418 274613 6756527 6756484 142756 6751410 6759435 6751382 6759436 6754379 6751382 6839163 6759437 6751385 444687 444660 444594 6777279 6777277 443767 6751379 148416 6751383 179842 103321 179847 1 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 4 7 3 Gasket, Charging Oil Pump Lockwasher, 3/8" Bolt, 3/8" -16 X 1-3/8" Hex. Pump Assembly, Charging Oil Cover Assembly, Oil Pump Cover Assembly, Pump Plug Cover, Pump - See Note Spring, Clutch Pressure Regulating Valve, Clutch Pressure Regulating Ring, Pressure Regulating Valve Snap Valve, Converter Pressure Regulating Spring, Converter Pressure Regulator Gasket, Plug Annular Plug, Converter Regulating Valve Hex. Head Gasket, Pump Cover Bearing, Pump Driving Shaft Gear Needle Gear, Oil Pump Driving Shaft Ring, Shaft Gear Seal Bearing, Pump Driving Shaft Gear Needle Ring, Hook Type Seal Sleeve, Shaft Gear Gear, Pump Driving Plug, 1/8" Socket Head Pipe Plug, 3/8" Hex. Socket Head Pipe Plug, 3/4" Square Head Pipe Body Assembly, Oil Pump Body, Oil Pump - See Note Dowel Shaft, Pump Driven Gear Bearing, Pump Driven Gear Needle Gear, Pump Driven Bolt, 3/8" -16 X 1-3/8" Hex. Lockwasher, 3/8" Bolt, 3/8" -16 X 2" M6-5-60.39(9 of 11) M6-5-60.39 FSCM No. 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List R1183 Torque Converter - Charging Oil Pump - Continued REF. PART NO. QTY. 146 147 148 149 150 151 152 153 154 155 156 157 158 159 457324 6703135 6768470 6703152 6750434 6753202 6750505 103323 179888 6772007 6750506 179841 103321 6750507 6750546 6750547 6777445 2 2 1 1 1 1 1 6 6 1 1 8 8 2 2 2 1 DESCRIPTION FSCM No. Bearing, Roller Ring, Output Shaft Hook Type Seal Shaft, Converter Output Industrial Key, Output Shaft Sleeve, Output Shaft Gasket, Bearing Retainer Housing, Bearing Lockwasher, 1/2" Bolt, 1/2" -13 X 1-7/8" Hex. Seal, Output Shaft Dual Oil Retainer, Output Shaft Bearing Bolt, 3/8" -16 X 1-1/4" Hex. Lockwasher, 3/8" Shim, (.003") Shim, (.010") Shim, (.031") Basic Seal And Gasket Kit M6-5-60.39(10 of 11) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List REF. R1183 Torque Converter Lines PART NO. QTY. DESCRIPTION M6-5-60.39 FSCM No. 5187327 5193849 5198351 144116 108687 5183079 125915 1 1 1 1 1 2 1 Torque Converter Oil Strainer Strainer Assembly Element Cap Elbow, 1" Street 450 Elbow, 1" Street 900 Connector Bushing, 1-1/4" X 1" Reducing Pipe 26095 26095 26095 26095 26095 26095 26095 5115752 111145 219357 5184291 1 1 1 1 Torque Converter Tank To Pump Hose, Flex Elbow, 1-1/4" Street 450 Nipple, 1-1/4" X 2" Clip 26095 26095 26095 26095 5177211 5176525 5176526 5176528 5176527 1 1 1 2 2 Oil Cooler To Torque Converter Tank Tube Connector, 3/4" Tube Sealastic Elbow, 3/4" Tube Sealastic 900 Seal Ring, 3/4" Tube Sealastic Nut, 3/4" Tube Sealastic 26095 26095 26095 26095 26095 5151189 181361 103321 117049 2 2 2 2 Oil Cooler Tank Tube Clip Clip Bolt, 3/8" -24 X 7/8" Lockwasher, 3/8" Nut, 3/8" -24 Hex. 26095 26095 26095 26095 5121808 141621 5176705 144613 189775 1 1 1 1 1 Torque Converter To Filter Hose, Flex Elbow, 3/4" Street 900 Elbow, 3/4" Tube 900 Nipple, 3/4" X 1-3/8" Pipe Tee, 3/4" X 1/2" Reducing Pipe 26095 26095 26095 26095 26095 5185398 5176705 1 1 Filter To Oil Cooler Hose, Flex Elbow, 3/4" Tube 900 26095 26095 5185390 118732 120702 5151189 5181415 181361 103321 117049 1 1 1 2 1 1 1 2 Torque Converter To Tank Hose, Flex 26095 Connector, 1/2" Tube Elbow, 3/8" Street 450 Clip Clip Bolt, 3/8" -24 X 7/8" Lockwasher Nut, 3/8" -24 26095 26095 26095 26095 26095 26095 26095 Note: Items Serviced As Part Of The Assembly Not As A Detail Part. M6-5-60.39(11 of 11) TM 10-3950-263-14&P-3 Parts List R1183 M6-5-60.40 Torque Converter Oil Filter REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. QTY. 5176393 179839 103321 5123382 5187310 5572799 6437298 5120740 124925 5574004 5573162 5187308 5187309 5154538 5573014 5571024 5133431 5133594 5126686 5575086 5121182 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 DESCRIPTION FSCM No. Filter Assembly, Converter Oil Bolt, 3/8" -16 X 1" Lockwasher, 3/8" Adaptor Oil Filter Gasket (Rubber) Gasket Gasket Stud Nut, 5/8" -18 Hex. Jam Shell, Converter Oil Filter w/Plug Decal Spring Retainer, Spring Washer Element (AC Type PF-132), Oil Filter Gasket Valve, Oil Filter By-pass Spring, By-pass Valve Plug, By-pass Valve Gasket, By-pass Valve Plug Plug, 1/4" Allen Head Pipe M6-5-60.40(1 of 2) 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 26095 TM 10-3950-263-14&P-3 Parts List REF. Torque Converter Oil Filter - Continued PART NO. QTY. DESCRIPTION 5127767 181433 103323 117051 1 2 2 2 FSCM No. Torque Converter Oil Filter Mounting Bracket Bracket Bolt, 1/2" -20 X 1-3/4" Lockwasher, 1/2" Nut, 1/2" -20 Hex. M6-5-60.40(2 of 2) 26095 26095 26095 26095 TM 10-3950-263-14&P-3 M6-5-60.41 Parts List Ether Start Kit REF. 1 2 3 4 5 6 7 8 9 PART NO. 820-0270 820-2575 820-2400 820-2532 820-2540 820-2567 820-2966 NL54-144 820-0327 QTY. 1 1 1 1 1 1 1 1 1 DESCRIPTION Ether Start Kit Clamp, Cylinder Valve Assembly Valve Fitting Tubing Screw, Wire Stop Atomizer Cable Cylinder, Fuel M6-5-60.41 (1 Of 1) FSCM No. 06991 06991 06991 06991 06991 06991 06991 06991 06991 TM 10-3950-263-14&P-3 M6-6-38.0 Parts List Hydraulic Pump GM6-71 One Stage L631-B REF. 1 PART NO. J1828 9J1829 18J355 18J359 1X5300 QTY. 1 1 1 1 2 JT891 JC2311 18J893 1X3734 1X6 1X3808 1 2 1 4 4 4 7 JM2655 1X2031 1X3971 1 1 2 8 9 1X929 18J361 2 1 2 3 4 5 6 DESCRIPTION Sheave Split Tapered Bushing Belt Mount Bracket Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1/2" Hose’ Assembly Adapter Bracket Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" X 2" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Locknut, Hex Head, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Hose Adapter Union 900, Steel, Zinc Plated Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1" Elbow, Straight, 900 Malleable Iron Sheave Guard M6-6-38.0(1 of 1) FSCM No. 36422 36422 36422 36422 72968 36422 36422 36422 90483 86157 72968 36422 09505 72968 09505 36422 TM 10-3950-263-14&P-3 M6-8-73.0 Parts List Engine Shut Down Controls M6-8-73.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List Engine Shut Down Controls - Continued REF. PART NO. QTY. DESCRIPTION 1 22J1028 1 Emergency Shut Down Control Cable (Red "T" Handle) 2 22J1029 1 Engine Shut Down Control Cable (Black "T" Handle) 25J121 4 Cable Tie 3 1X5313 4 Screw W/Nylon Washer, Phillips Drive Pan Head, Recessed, Type AB Thread, Quality Steel - Heat Treated, Cadium Plated, #10 X 1/2" 4 1X2817 4 Insulated Clamp, Steel, 1/32" Black Neoprene Insulation, 3/8" 5 1X3743 1 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 1" 1H1501 1 Cable Clamp 1H1502 1 Strip 1X5079 1 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert UNF-38, 1/4" 6 HC2239 1 Angle 7 1H2470 1 Clamp 8 1X3777 1 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 1-1/4" 1X5079 1 Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNF-3B, 1/4" 1X2404 1 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" 9 1X3540 1 Machine Screw, Round Head Carbon Steel, ASTM A307, Zinc Plated, #8 X 5/8" 10 HC2170 1 Cable Anchor M6-8-73.0 (2 Of 2 ) FSCM No. 36422 36422 36422 90483 30966 90483 36422 36422 72968 36422 36422 90483 72968 86157 90483 36422 Parts List Hand And Foot Throttle REF. 1 2 R482 PART NO. 18J1537 22J818 1X4062 QTY. 1 2 4 1X4 HC105 1X1080 HC104 1X193 1X2394 4 7 7 4 4 4 7 8 9 10 1X812 18J1618 18J1615 18J1507 1X2574 1X3809 2 2 1 2 4 4 11 18J1533 12J337 1X4705 1 1 1 3 4 5 6 TM 10-3950-263-14&P-3 M6-8-81.0 DESCRIPTION Foot Pedal (Right Side) Bracket 36422 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild steel, Zinc Plated, 3/8" Pin Cotter Pin, Extended Prong, Square Cut, 1/16" X 1/2" Yoke Hexagon Jam Nut, 1/4" UNF-2B, Steel, Zinc Plated Needle Roller Bearing Drawn Cup, AFBMA Type NIB W/Oil Hole, Rollers-High Carbon Chromium Steel, Cup-Low Carbon Steel 1" I.D. X 1-1/4" O.D. X 3/4" Lg. Grease Fitting, 1/8" - 27 Dry Seal, PTF-SAE Short Rod Throttle Shaft Bearing Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Throttle Lever Knob Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1/2" M6-8-81.0 (1 Of 4) FSCM No. 36422 72968 86157 36422 20859 36422 90483 80657 78385 36422 36422 36422 90483 72968 36422 36422 72968 TM 10-3950-263-14&P-3 Parts List R482 Hand And Foot Throttle - Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 31J389 1 Quadrastat Control 36422 1X650 3 Machine Screw, Flat Head Carbon Steel, Zinc Plated, 90483 1/4" X 5/8" 1X5079 3 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, 1/4" 12 22J1142 2 Connector 36422 1X5314 2 Screw, Pan Head W/Nylon Washer, Phillips Drive Head, 90483 Corrosion Resistant Steel, Passivated, UNC-2A Threads, 1/4" X 5/8" 1M5799 2 Spacer 36422 1X5571 2 Machine Screw, Round Head, Carbon Steel ASTM A307, 90483 Zinc Plated, 1/4" X 1-3/4" 13 22J1659 1 Cover 36422 14 22J826 1 Cable 36422 22J1006 1 Connector Lever 36422 15 18J1740 1 Hand Throttle Link 36422 1X2393 1 Roll Pin, Carbon Steel, 5/16" X 1-1/4" 09505 16 HA398 1 Spring 36422 17 18J1559 1 Eye Bolt 36422 1X1912 1 Locknut, Nylon Insert, Hexagon, National UNF-3B Thread, 72968 Grade 5, Low Carbon Steel, Rockwell C32, 1/4" 1X2 1 Washer, Plain Washer, Hot Rolled Mild Steel, Zinc Plated 86157 1/4" 18 18J1525 2 Link 36422 19 16H24 1 Rubber Grommet 36422 20 22J1582 1 Throttle Cable 36422 21 18J1619 1 Bracket 36422 1X2919 2 Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/16" X 1-1/4" 90483 1X5080 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, 5/16" 1X3 2 Washer, Plain Washer, Hot Rolled Mild Steel, Zinc Plated 86157 5/16" 22 16H501 1 Yoke 36422 23 18J1621 1 Foot Pedal (Left Side) 36422 M6-8-81.0 (2 Of 4) Parts List Hand And Foot Throttle - Continued REF. 24 25 26 27 PART NO. AC5493 AA562 1X3599 JC2280 1X5079 QTY. 1 1 1 1 1 28 29 30 31 32 33 1X168 1X193 22J1652 HC2425 22J1650 1X5079 2 2 1 1 1 2 34 35 22J1649 1X5079 1 1 36 37 38 28J2206 1 1X5079 1 39 40 JC2280 1 R482 TM 10-3950-263-14&P-3 M6-8-81.0 DESCRIPTION Capscrew Bracket Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1-1/4" Clamp Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Nut, Hexagon, UNF-2B, Carbon Steel, 7/16"(Supplied W/Cable) Jam Nut, Hexagon, UNF-2B, Steel, Zinc Plated, 1/4" Bracket Eye Bolt Linkage Assembly Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Rod Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Pin Throttle Linkage, See Throttle Controls, 6-5-60.19 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Throttle Spring, See Throttle Controls 6-5-60.19 Clamp M6-8-81.0 (3 Of 4 ) FSCM No. 36422 36422 90483 36422 72968 90483 90483 36422 36422 36422 72968 36422 72968 36422 72968 36422 TM 10-3950-263-14&P-3 Parts List Hand And Foot Throttle - Continued REF. PART NO. QTY. DESCRIPTION 1X3743 1X5079 1 1 R482 FSCM No. Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" M6-8-81.0 (4 Of 4 ) 90483 72968 TM 10-3950-263-14&P-3 M6-17-30.0 Parts List Master Clutch Control REF. 1 PART NO. 22J902 1X1305 1X2574 1X3809 QTY. 1 2 2 2 3 4 22J906 1X4318 1 1 5 6 22J909 1X3767 1X4513 1 1 1 7 8 9 22J900 1X8 1X5296 1 1 1 10 1X4453 2 11 12 LX4705 22J895 2 1 2 DESCRIPTION Pin 36422 Cotter Pin, Extended Prong, Square Cut, 3/16" X 1" Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, UNS-3B, Rockwell C32 Nylon Insert, UNC-3B, 3/8" Bracket Coiled Steel Journal Bearing, Carbon Steel W/Woven Teflon Fiber I.D. Surface .7500 Shaft Dia. X .8745" Housing Bore X 1.0000" Lever Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/4" X 7-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/4" Spacer Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/4" Thrust Bearing, Metal Backed 2.250" O.D. X 1.281" I.D. X .058" TWK Coiled Steel Journal Bearing, Carbon Steel W/Woven Teflon Fiber I.D. Surface, 1.25 Shaft Dia. X 1.4068 HSG Dia. X .75 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1/2" Hanger M6-17-30.0 (1 Of 2 ) NA351 -B FSCM No. 20859 90483 72968 36422 80657 36422 90483 72968 36422 86157 80657 80657 72968 36422 TM 10-3950-263-14&P-3 Parts List Master Clutch Control - Continued REF. PART NO. QTY. DESCRIPTION 13 14 15 16 17 822013003 AR 22M89 1X1082 1X2574 1X3809 1 2 2 2 18J1089 18J1575 1X2582 1 1 1 1X1647 18 19 20 21 22 23 24 22J903 JC646 JC22 1X1086 1X198 22J911 22J910 1X196 22J916 1 1 5 5 5 5 1 1 1 1 FSCM No. Hose, Oil Resistant, One Or Two Plies Of Synthetic Yarn Reinforcement, 4" (10cm) Pin Cotter Pin, Extended Prong, Square Cut, 3/32" X 1/2" Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, UNS-3B Rockwell C32 Nylon Insert, UNC-3B, 3/8" Cover Lever Capscrew, Hex Head, UNF-Class 2A-Grade 5, Zinc Plated, 5/8" X 2-1/2" Locknut, Nylon Insert Hexagon, National UNF-3B Thread, Grade 5, Low Carbon Steel, Rockwell C32, 5/8" Threaded Rod GM Engine, See Keysheet M6-5-60.0 Clevis Yoke Pin Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Hexagon Jam Nut, 5/8" UNF-2B, Steel, Zinc Plated Threaded Rod Threaded Rod Hexagon Jam Nut, 1/2", UNF-2B, Steel, Zinc Plated Bell Crank M6-17-30.0 (2 Of 2) 24161 36422 20859 90483 72968 36422 36422 90483 72968 36422 36422 36422 20859 36422 36422 90483 36422 Parts List Lower Control Panel REF. R1183 PART NO. QTY. 1 2 3 4 5 6 22N1034 28J2362 12A2025 1X4345 22J1586 1X2718 1 1 1 1 1 1 7 8 9 10 20J1240 1X2230 1X823 25A202 1 1 1 1 DESCRIPTION TM 10-3950-263-14&P-3 M6-24-63.0 FSCM No. Panel, Lower Instrument Gauge, S-o-M Pressure Plug Button Union, 370 Flare, Steel, 1/4" X 1/4" Tube Assembly 37° Connector, Female, Flare, Steel, Zinc Plated, 1/4" X 1/4" Pressure Snubber Pipe Reducer Bushing, Carbon Steel, 1/4" X 1/8" Pipe Plug, Hex Socket, Heat Treated Alloy Steel, 1/8" Service Tee M6-24-63.0 (1 of 1) 36422 36422 36422 09505 36422 09505 36422 09505 09505 36422 Parts List Instrument Panel, Gauges And Switches R384 M6-24-68.0 (1 of 4) TM 10-3950-263-14&P-3 M6-24-68.0 TM 10-3950-263-14&P-3 Parts List R384 Instrument Panel, Gauges And Switches - Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 1 8A1426 1 12 Volt Toggle Switch 36422 2 28N426 2 Windshield Wiper Switch 36422 3 28N1096 2 Toggle Switch 36422 4 HC2273 1 Push Button Switch 36422 5 28J2108 1 Wire Assembly 36422 6 20H333 1 Ignition Switch 36422 7 18D65 1 Pilot Light 36422 8 MS25231 1 Incandescent Lamp 96906 9 17A254 1 Push Button Switch 36422 10 28J2376 1 Engine Hourmeter 36422 11 32J1117 1 Wire Assembly 36422 12 19J770 1 Wire Assembly 36422 13 22N1003 21 Screw Receptacle 36422 14 18N1228 1 Bracket 36422 15 1X5314 42 Screw, Pan Head W/Nylon Washer, Phillips Drive Head, 90483 Corrosion Resistant Steel, Passivated, UNC-2A Threads 1/4" X 5/8" 16 22P1521 1 Label 36422 17 22N1082 1 Right Overhead Panel 36422 18 18N1231 1 Bracket 36422 19 22N1361 1 Instrument Housing 36422 20 18N1151 1 Instrument Panel 36422 21 22P1333 1 Label 36422 22 32J1117 4 Wire Assembly 36422 23 18B379 3 Wire Assembly 36422 24 36L104 1 Wire Assembly 36422 25 28J2377 1 Converter Temperature Gauge 36422 26 28J2379 1 Oil Pressure Gauge 36422 27 28J2375 1 Water Temperature Gauge 36422 28 28J2380 1 Voltmeter 36422 29 28A1045 3 Wire Assembly 36422 30 1 Lower Instrument Panel - See M6-24-63.0 31 1X4705 6 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 72968 1/4" X 1/2" 32 1X2 26 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" 86157 33 1X5091 8 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #6 34 1X5435 8 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc 90483 Plated, #6 X 3/4" 35 28J2280 1 Bulkhead Connector 36422 36 22N1031 1 Plate 36422 37 1X5079 11 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNF-3B, 1/4" 38 13H415 5 "0" Ring 36422 39 AC5493 9 Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/4" X 3/4" 36422 40 18N1229 1 Bracket 36422 41 18N1154 1 Left Overhead Panel 36422 42 18N1230 1 Bracket 36422 43 22N936 1 Electrical Board 36422 44 28N860 3 Circuit Breaker - 15 Amp 36422 45 28J963 3 Circuit Breaker - 6 Amp 36422 46 28N861 1 Circuit Breaker - 10 Amp 36422 M6-24-68.0 (2 of 4) Parts List Instrument Panel, Gauges And Switches - Continued R384 M6-24-68.0 (3 of 4) TM 10-3950-263-14&P-3 M6-24-68.0 TM 10-3950-263-14&P-3 Parts List R384 Instrument panel, Gauges And Switches - Continued REF. PART NO. QTY. DESCRIPTION 47 1 Circuit Breaker - See M6-25-60.0 48 36A2990 2 12 Volt Solenoid 49 1X4638 24 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 50 25J689 3 Wire Assembly 51 31J689 3 Wire Assembly 52 26A159 1 Wire Assembly 53 20H78 3 Wire Assembly 54 22N919 1 Hinge 36422 55 lX2841 4 Capscrew, Hex Socket, Flat Head, UNR-Coarse Thread, Alloy Steel, Class 2A And Class 3A, 1/4" X 5/8" 56 28N572 1 Dome Light 36422 57 MS35478 1 Incandescent Lamp 58 22N877 1 Center Overhead Panel 59 18N1232 1 Bracket 36422 60 1X1 8 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/16" M6-24-68.0 (4 of 4) FSCM No. 36422 72968 36422 36422 36422 36422 90483 08805 36422 86157 TM 10-3950-263-14&P-3 M6-25-53.0 Parts List Hot Water Heater REF. 1 2 3 4 5 6 7 PART NO. 32R114 3R305 3R341 3R298 3R299 3R339 1X1890 3R297 3R337 3R338 3R300 3R340 QTY. 1 1 2 2 2 4 4 1 4 4 1 2 DESCRIPTION Heater Assembly Casing 12 Volt Motor Fan * Motor Clamp Screw Locknut, Nylon Insert, Steel, Cadmium Plated, UNF-3B, #10 Bottom Panel Bolts Nuts Core Plugs * For FSCFM Numbers See Vendor Annex List. M6-25-53.0(1 of 1) FSCM No. 36422 * * * * 72968 * * * * * TM 10-3950-263-14&P-3 M6-25-60.0 Parts List Hot Water Heater Installation M6-25-60.0 (1 Of 4) TM 10-3950-263-14&P-3 Parts List Hot Water Heater Installation - Continued REF. PART NO. QTY. DESCRIPTION FSCM No. 1 36A2990 1 12 Volt Solenoid 36422 2 25J689 1 Wire Assembly 36422 3 18A2363 1 Circuit Breaker 36422 1X623 2 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc 90483 Plated, #10 X 3/4" 1X4638 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #10 4 26A159 1 Wire Assembly 36422 5 1 Hot Water Heater (See Keysheet (M6-25-53.0) 1X4242 4 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/4" 72968 X 3/4" 22N1003 4 Screw Receptacle 36422 6 822001003 AR Heater Hose, Type P (EPDM), Black Color, Snythetic Yarns, 24161 1 Ply, 30" (76cm) 7 1X4705 2 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 72968 1/4" X 1/2" 1X2404 2 Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/4" 86157 8 1X618 5 Machine Screw, Round Head, Carbon Steel, ASTM, A307, Zinc 90483 Plated, #6 X 3/8" 1X5091 5 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #6 9 22N1375 1 Resistor Cover 36422 10 32R138 1 Resistor 36422 11 18A2838 6 Tube Clamp 36422 12 AC4259 6 Pipe Nipple 36422 13 AC3675 2 Anchor Coupling 36422 14 822001003 AR Heater Hose, Type P (EPDM), Black Color, Snythetic Yarns, 24161 1 Ply, 18" (46cm) 15 22N1051 1 Cable Clamp 36422 1X623 1 Machine Screw, Round Head, Carbon Steel ASTM, A307, Zinc 90483 Plated, #10 X 3/4" 1X4638 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #10 16 31R4 1 Shut-Off Valve 36422 17 28N1186 1 Bracket 36422 18 1X623 2 Machine Screw, Round Head, Carbon Steel ASTM, A307, Zinc 90483 Plated, #10 X 3/4" 1X4638 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #10 1X1776 2 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, #10 86157 19 AC5493 1 Capscrew 36422 1X5079 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 86157 C32, Nylon Insert, UNC-3B, #10 20 822001003 AR Heater Hose, Type P (EPDM), Black Color, Synthetic Yarns, 24161 1 Ply, 18" (46cm) 21 1X926 2 900 Street Elbow, Malleable Iron, 3/8" 09505 22 1X896 2 Pipe Reducer Bushing, Hex Head, 3/4" X 3/8" 09505 23 22P1584 1 Decal - Heater Controls 36422 24 31J687 1 Toggle Switch - 3 Position 36422 25 22J144 1 Switch 36422 26 22N1057 1 Instrument Knob 36422 27 22J1661 1 Wire Harness 36422 M6-25-60.0 (2 Of 4) TM 10-3950-263-14&P-3 M6-25-60.0 Parts List Hot Water Heater Installation - Continued REF. 28 29 30 31 32 33 34 35 36 PART NO. 1X623 QTY. 1 1X4638 1 21H269 31J612 22N1374 HC37 JC2987 1N1065 AC5493 1X5079 1 1 1 2 4 4 4 4 1J1193 1X893 AC4257 HC37 AC4257 HC37 822001003 4 1 1 1 1 1 AR NA272-C,NA307-C,NA333-B DESCRIPTION FSCM No. Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc 90483 Plated, #10 X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, #10 Wire Assembly 36422 Wire Assembly 36422 Control Cab 36422 Hose Clamp 36422 Bracket 36422 Hose Clamp (Small) 36422 Capscrew 36422 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell 72968 C32, Nylon Insert, UNC-3B, 1/4H Tube Clamp (Large) 36422 Pipe Reducer Bushing, Hex Head, 1/2" X 3/8" 09505 Shut-Off Cock 36422 Hose Clamp 36422 Shut-Off Cock 36422 Hose Clamp 36422 Heater Hose, Type P (EPOM),Black Color, Synthetic Yarns, 24161 1 Ply, 1/2" M6-25-60.0 (3 Of 4) TM 10-3950-263-14&P-3 Parts List Hot Water Heater Installation - Continued REF. PART NO. QTY. DESCRIPTION 850019001 AR FSCM No. Insulation Sleeve, Closed Cell Synthetic Rubber Insulation, ASTM C534 Type 1 M6-25-60.0 (4 Of 4) 82942 Parts List Windshield Wiper (Upper) REF. 1 PART NO. 1X3540 1X4438 1X5064 2 3 4 19N190 26R46 28N1175 1X629 1X5079 5 6 7 22N935 39J220 1X3777 1X5079 8 9 10 45R32 22N889 1X5465 TM 10-3950-263-14&P-3 M6-26-17.0 QTY. DESCRIPTION 4 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, #8 X 5/8" 4 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, #8 4 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #8 1 Wiper Arm 1 Wiper Blade 1 Pantograph Adapter 2 Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, 1/4" X 3/4" 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" 1 Upper Mounting Bracket 1 Ball Joint 1 Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/4N X 1-1/4" 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" 1 Spacer 1 Crank Arm 3 Machine Screw, American Standards, Round Head, NF-2 Threads, Carbon Steel, Zinc Plated, Chromate Treated, M6-26-17.0 (1 Of 2 ) FSCM No. 90483 86157 72968 36422 36422 36422 90483 72968 36422 36422 90483 72968 36422 36422 90483 TM 10-3950-263-14&P-3 Parts List Windshield Wiper (Upper) - Continued REF. PART NO. QTY. DESCRIPTION 11 12 13 14 15 16 28J1241 22N945 lX193 19A521 22N886 1X1912 1 1 2 1 1 1 17 1X647 2 1X4638 2 28N423 1 18 FSCM No. 1/4" X 1/2" Rubber Grommet Threaded Rod Hexagon Jam Nut, 1/4", UNF-2B, Steel Zinc Plated Ball Joint Pivot Assembly Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNF-3B, 1/4" Machine Screw, Flat Head, Carbon Steel, Zinc Plated, #10 X 5/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Wiper Motor M6-26-17.0 (2 Of 2) 36422 36422 90483 36422 36422 72968 90483 72968 36422 TM 10-3950-263-14&P-3 M6-26-20.0 Parts List Lower Windshield Wiper REF. 1 2 3 PART NO. 22N943 22N1060 1X1876 QTY. 1 1 2 4 1X6038 3 5 6 22N941 1X5257 1 3 7 1X5382 1 1X3 28N436 28N435 4C234 8R216 8R217 1X3599 2 2 2 1 1 1 2 1X3809 2 22N934 1 8 9 10 11 DESCRIPTION Link Front Wiper Shaft Hex Head, Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, 3/8" Insulated Clamp, Steel, 1/32" Black Neoprene Insulation 1/2" Bell Crank Hexagon Head Capscrew, UNF Class 2A, Grade 5, Plastic Patch, Zinc Plated, Chromate Treated, 3/8" X 1-3/4H Hex Socket Head Shoulder Screw, Stripper Bolts, NC-3 Threads, Alloy Steel, 1/4" X 5/16" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Clip Washer Spacer Wiper Arm Wiper Blade Capscrew, Hex Head, UNC Class 2A-Grade 5, Zinc Plated, 3/8" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Mounting Bracket M6-26-20.0 (1 Of 2 ) FSCM No. 36422 36422 90483 30966 36422 72968 90483 86157 36422 36422 36422 36422 36422 90483 72968 36422 TM 10-3950-263-14&P-3 Parts List Lower Windshield Wiper - Continued REF. PART NO. QTY. DESCRIPTION 12 13 14 15 22N938 28N423 22N1081 1X5383 1 2 1 1 1X3 1X5079 1 1 FSCM No. ’Wiper Crank Arm Wiper Motor Wiper Connecting Link Hex Socket Head Shoulder Screw, Stripper Bolts, NC-3 Threads, Alloy Steel, 1/4" X 5/16" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Locknut, Hexagon, Low Caron Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" M6-26-20.0 (2 Of 2) 36422 36422 36422 90483 86157 72968 TM 10-3950-263-14&P-3 M6-36-13.0 Parts List Engine Pinion REF. PART NO. QTY. 1 2 1H1894 1X3193 1 1 3 4 5 6 7 1H1895 1H1855 17C67 1H2078 1X3964 1 1 1 1 1 V143-S,L625-A FSCM No. DESCRIPTION Spacer Assembly Wear Sleeve, AISI CRCQ .15% Carbon Maximum, 3.875" Shaft Dia. X 4.000" O.D. X .625" Spacer Sprocket Key End Cap Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1" X 2-1/2" M6-36-13.0 (1 Of 1 ) 36422 80201 36422 36422 36422 36422 72968 Parts List Engine Drive Chain REF. 1 2 3 4 PART NO. RC-60-4 1H609 1H624 lH610 1H628 3H87 R284 QTY. 261 4 1 AR 2 AR DESCRIPTION TM 10-3950-263-14&P-3 M6-37-9.0 FSCM No. Chain Link Connecting Link 3 Pitch Section Offset Link 2 Pitch 5 Pitch Section Oil Field Cotter 36422 36422 36422 36422 36422 36422 M6-37-9.0 (1 Of 1 ) Parts List Adjustable Chain Case R482 TM 10-3950-263-14&P-3 M6-38-22.0 KA254-B M6-38-22.0 (1 Of 3) TM 10-3950-263-14&P-3 Parts List R482 Adjustable Chain Case - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1X830 HC333 22H422 lX5137 1 1 1 2 1X6 22H463 22H478 22H391 1X2574 1X3809 2 1 1 1 30 30 28H137 1X4062 1 6 28H138 1X2775 1X3808 1 8 8 1X20 22H445 1X830 22H400 22H401 1X4062 16 1 1 1 1 10 22H412 1X4203 1 2 22H417 22H416 1X5917 1 1 AR 1X3809 2 22H410 22H444 1X4148 1 1 2 1X20 22H443 28H72 1X2042 lX155 lX4213 2 1 1 1 1 AR FR8 1X5300 1 2 22H411 22H393 1X2586 1 1 2 FSCM No. Pipe Plug, Square Head, Steel, 3/4" Cap 36422 Cover 36422 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 1-1/4" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Spacer 36422 Hydroil Washer Gasket 36422 Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Cover 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 3/4" Gasket 36422 Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 2-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 12" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 1/2" Spacer 36422 Pipe Plug, Square Head Steel, 3/4" Cover 36422 Gasket 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 3/4" Pin 36422 Truarc Retaining Ring, External, Natural, Carbon Spring Steel, 1.375" Shaft Dia. Bracket 36422 Gasket 36422 Thread Seal Washer, Nitrile Rubber Molded To A Cadmium Plated Steel Retainer, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Chain Tightner Bracket 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Spacer 36422 Adjusting Rod Rollpin, Carbon Steel, 3/8" X 3" Finished Hexagon Nut, Coarse Thread, Carbon Steel, 3/4" Thread Seal Washer, Nitrile Rubber Molded To A Cadmium Plated Steel Retainer, 3/4" Lock Bar36422 Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" X 1/2" Pin 36422 Sprocket36422 Ball Bearing, Single Row, Non-Filling Slot Assembly Deep Groove, Conrad Type, AFBMA Type BC, Light Duty, M6-38-22.0 (2 Of 3) 09505 72968 86157 36422 90483 72968 72968 90483 72968 86157 09505 72968 79136 02697 72968 36422 72968 86157 36422 09505 90483 02697 72968 91936 TM 10-3950-263-14&P-3 Parts List R482 Adjustable Chain Case - Continued REF. PART NO. QTY. DESCRIPTION 22 23 24 25 22H449 22H389 1X4062 AR 1 12 22H390 22H452 22H455 1X5133 1 1 1 11 22H450 18H131 22H451 22H479 1 1 1 1 M6-38-22.0 FSCM No. Plain, 1.7717" I.D. X 3.3465" O.D. X .7480" Shim, (12 Each Side) Cover 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 3/4" Gasket 36422 Retainer 36422 Gasket 36422 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 5/8" Oil Seal Assembly Oil Seal 36422 Sheet 36422 Chain Case 36422 M6-38-22.0 (3 Of 3) 36422 72968 72968 36422 Parts List R983 TM 10-3950-263-14&P-3 M6-44-19.0 12 Volt Floodlight Assembly NA390-B M6-44-19.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List R983 12 Volt Floodlight Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 22R52 28J879 25H128 1X4705 1 1 1 1 5 6 7 8 22R59 1 1R379 22R42 4478 21R396 RC327 22R58 RC422 RC417 1X3809 6 4 1 5 2 1 2 2 16 1R380 RC155 RC156 22R55 22R53 RC416 22R54 8A1426 22R62 22R60 22R61 22R57 6 2 2 1 1 1 1 1 1 1 1 1 21R423 21R424 1 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 FSCM No. Bracket 36422 Wire Assembly Circuit Breaker - 40 Amp Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 1/4" X 1/2" Wire Assembly Engine Block Right Side - Ref. Only Cable Tie 36422 Floodlight - 12 Volt Lamp 08805 Rubber Grommet Term-Ring, Wire Wire Assembly Receptacle, Shur-Plug Term-Bullet, Wire Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Cable Tie, Heavy Duty Plug, Twist Lock Rubber Cover Wire Harness Wire Assembly 3-Way Connector Wire Assembly Toggle Switch Wire Assembly Wire Assembly Wire Assembly Flanged Receptacle The Following Items Are Used In The Operator’s Cab And Are Not Shown: Label - Cab Floodlights Label - Boom Floodlights M6-44-19.0 (2 Of 2) 36422 36422 72968 36422 36422 36422 36422 36422 36422 36422 72968 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 Parts List R384 Floodlight System M6-44-20.0 (1 of 5) TM 10-3950-263-14&P-3 M6-44-20.0 TM 10-3950-263-14&P-3 Parts List R384 Floodlight System - Continued REF. PART NO. QTY. 1 1X5079 36 2 3 HR363 992768001 20 AR 4 5 6 7 8 9 41R112 21R214 21R261 21R367 1R655 829045012 15 29 10 6 3 AR 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 21R262 AC5493 21R376 21R245 1X5290 1R697 21R408 1R388 8A1484 32R65 32R63 21R423 21R424 9R5 RA257 21R384 RA268 9R12 9R4 21R380 21R422 RA258 9R23 21R381 21R383 21R385 22R44 22R43 1X3809 21R396 22N1587 21R386 22R45 1X5079 3 36 2 2 5 1 1 1 1 1 2 1 1 4 4 2 3 3 3 3 1 1 1 1 1 3 4 4 4 3 2 1 2 16 44 45 46 18D62 1R381 22R51 21R388 21R262 8 12 1 1 2 47 DESCRIPTION FSCM No. Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Pipe Strap 36422 Flexible Metallic Conduit, Covered With Smooth Liquidtight Polyvinylchoride Cover, Outer Cover To Be Marked EF, 3/4" Flexible Conduit Fitting Sealing Ring 36422 Chase Nipple Square Box 36422 Strain Relief Connector Hard Service Cord, Type SO, 600 Volts, 3 Conductor, 16 Ga., 65 X #34Stranding, 10 Ampacity Per Conductor Locknut 36422 Capscrew 36422 Square Box 36422 Handy Box 36422 Rigid Conduit Pipe Coupling, Mild Steel, 3/4" Label - Remote Start Cover 36422 Toggle Switch Toggle Switch Switch Box 36422 Toggle Switch Label - Cab Floodlights Label - Boom Floodlights Duplex Receptacles Handy Box Cover Box Cover 36422 Lamp Guard 36422 Lamp, 75 Watt, 120 Volt Lamp Holder 36422 Octagon Box 36422 Label - Interior Lights Box Cover 36422 Switch 36422 Box Cover 36422 Box Cover 36422 Plug 36422 Floodlight 36422 Lamp Fixture 36422 Locknut, Nylon Insert, Hexagon, ASL UNC-3B Thread, 3/8" Grommet 36422 Bracket 36422 Connector 36422 Mounting Bracket Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 1/4" U-Bolt 36422 Wire Support 36422 Boom Floodlight Cord Assembly Device Box 36422 Locknut 36422 M6-44-20.0 (2 of 5) 72968 09127 36422 36422 36422 81774 09505 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 72968 36422 72968 36422 Parts List Floodlight System - Continued R384 M6-44-20.0 (3 of 5) TM 10-3950-263-14&P-3 M 6-44-20.0 TM 10-3950-263-14&P-3 Parts List R384 Floodlight System - Continued REF. PART NO. QTY. 48 49 50 21R214 1R655 829045013 2 2 AR 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 21R385 21R386 21R387 21R402 21R395 21R213 21R403 21R382 829019017 829019005 829019012 829019006 829019007 829019010 829019009 829019015 829019008 1 1 1 1 1 1 2 1 AR AR AR AR AR AR AR AR AR DESCRIPTION FSCM No. Flexible Conduit Fitting Strain Relief Connector Hard Service Cord, Type SO, 600 Volts, 3 Conductors, 14 Ga., 14 X #30 Stranding, 15 Ampacity Per Conductor Plug 36422 Connector 36422 Receptacle 36422 Power Cord 36422 Bolt On Hub 36422 900 Connection Circuit Breaker Load Center 36422 Wire, 600 Volts, Type THW, 12 Ga., Red Wire, 600 Volts, Type THW, 10 Ga., Black Wire, 600 Volts, Type THW, 12 Ga., Whit e Wire, 600 Volts, Type THW, 10 Ga., White Wire, 600 Volts, Type THW, 10 Ga., Green Wire, 600 Volts, Type THW, 14 Ga., Green Wire, 600 Volts, Type THW, 14 Ga., White Wire, 600 Volts, Type THW, 14 Ga., Red Wire, 600 Volts, Type THW, 14 Ga., Black M6-44-20.0 (4 of 5) 36422 81744 36422 36422 74240 74240 74240 74240 74240 74240 74240 74240 74240 Parts List Floodlight System - Continued R384 M6-44-20.0 (5 of 5) TM 10-3950-263-14&P-3 M6-44-20.0 Parts List R983 Upper Wiring W/GM Engine M6-47-17.1(1 of 3) TM 10-3950-263-14&P-3 M6-47-17.1 TM 10-3950-263-14&P-3 Parts List Upper Wiring W/GM Engine - Continued REF. PART NO. QTY. 1 2 3 4 28J917 28J879 25H128 1X4705 1 2 2 5 5 1X4062 2 6 7 3 9 10 11 12 13 14 15 16 1X3 22J552 39J218 22J553 36A2990 22J554 22J563 22J548 22J1099 22J547 22J1556 26A631 1X4705 2 1 1 1 1 1 1 1 1 1 1 1 4 R983 DESCRIPTION FSCM No. Ground Wire 36422 Wire Assembly Circuit Breaker Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1/2" Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Bracket 36422 Tube Clamp 36422 Wire Assembly 12 Volt Solenoid Wire Harness Wire Harness Wire Harness Wire Assembly Wire Harness Wire Harness Terminal Box 36422 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1/2" M6-47-17.1 (2 Of 3) 36422 36422 72968 72968 86157 36422 36422 36422 36422 36422 36422’ 36422 36422 72968 PARTS LIST R983 Upper Wiring W/GM Engine - Continued REF. PART NO. QTY. DESCRIPTION 17 18 19 20 21 22 23 24 25 1X2 28A960 1X950 28J1609 1X5079 4 2 2 4 4 12A960 12A962 12A964 1X4705 1 1 1 1 1X2 HC2168 1X4705 1/4" X 1/2" 28J732 22J565 16H24 19A425 TM 10-3950-263-14&P-3 M6-47-14.1 FSCM No. 86157 36422 09505 1 1 1 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Strain Relief Bushing Pipe Locknut, Malleable Iron Shock Mount 36422 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Horn 36422 Nut 36422 Bracket 36422 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/4" X 1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Tube Clamp 36422 Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1 1 1 1 Drum Rotation Amplifier Ground Wire 36422 Rubber Grommet Rubber Grommet 36422 M6-47-17.1(3 of 3) 72968 72968 86157 72968 36422 36422 TM 10-3950-263-14&P-3 M6-48-25.0 Parts List Cab Wiring M6-48-25.0 (1 Of 2 ) TM 10-3950-263-14&P-3 Parts List Cab Wiring - Continued REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 No 1 2 3 4 5 6 7 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 22J1663 RC422 28J2181 22J1662 28J911 RC417 RC422 RC416 22J1661 12A1193 RC326 28J1595 28J939 Color Red Red Wht Brn Orn Blue Grn Org Blue Grn Brn Wht Grn Orn Blue Yel Grn Red Blue Wht Grn Blk Red DESCRIPTION 1 6 1 1 1 8 8 3 1 1 1 3 1 FSCM No. Wire Harness Receptacle 36422 Ground Wire 36422 Wire Harness Ground Wire 36422 Wire Terminal Receptacle 36422 Three Way Connector Wire Harness Wire Terminal Wire Terminal Receptacle 36422 Harness 36422 Function +12 VDC - Mn. Brk +12 VDC - Mn. Brk Starter Water Temp Convert. Temp Oil Pres. Fuel Shutdown Horn B.H. Planet F.D. Planet R.D. Planet Rot. Indic. Amp R.D. Rot. Indic R.D. Rot. Indic F.D. Rot. Indic F.D. Rot. Indic Hourmeter Dome Light Switch - Light Upper Wiper Lower Wiper Switch Wiper - Park Wiper - High 36422 36422 36422 36422 36422 36422 36422 No 26 27 28 29 30 31 32 33 34 36 37 38 39 40 41 50 60 70 100 108 110 111 200 Color Wht Grn Grn Yel Blue Wht Wht Wht Red Red Wht Orn Grn Blk Red Blk Brn Wht Blue Wht Red Vio Orn M6-48-25.0 (2 Of 2) Function Wiper Mot. R.D. Indic. - Lev. R.D. Indic. - Lev. F.D. Indic. - Lev. F.D. Indic. - Lev. Starter Switch Gauges Ignition Switch - Sol. Ignition Switch Horn Heater Rt. Lev. Upper Wiper - Low. Upper Wiper - Park Upper Wiper - High Ground Lev. Rot. Indic. (Blue Button) Rot. Indic. (Gold Button) Two Speed Heater - Med. Heater - Low Heater - High Two Speed TM 10-3950-263-14&P-3 M7-1-7.0 Parts List Accumulator Assembly REF. PART NO. QTY. 1 JC2598 1X3968 1 2 2 3 JC2593 1X4513 1 8 4 5 28J94 JC2299 1J939 1J3629 JC2601 JC2706 JC3551 JC2299 JC2305 JC3102 JC2301 JC3550 1 2 2 1 1 1 1 2 8 1 1 1 6 7 8 9 10 11 12 13 14 DESCRIPTION FSCM No. Accumulator Assembly Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 5/16" X 3/4" Filler Cap Locknut, Hexagon Low Carbon Steel, Zinc Plated, Rockwell C32 Nylon Insert, UNC-3B,3/4" "O"-Ring 36422 "O"-Ring 36422 Back-Up Ring Label - Metal Pressure Vessel Air Valve Assembly Washer 36422 Accumulator Top "O"-Ring 36422 Tie Bolt 36422 Piston 36422 Body 36422 Accumulator Bottom M7-1-7.0 (1 Of 1) 36422 72968 36422 72968 36422 36422 36422 36422 36422 Parts List R384 Hydraulic Power Assembly M7-1-23.0 (1 Of 2) TM 10-3950-263-14&P-3 M7-1-23.0 TM 10-3950-263-14&P-3 Parts List Hydraulic Power Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 1X3843 JC1795 1X926 1D41 AC82 1J1665 1X831 JC3089 1J1666 1X829 lX3717 lX28 1 1 2 1 1 1 1 1 1 1 8 8 JC2192 JC3896 BC596 1X1174 1X2147 lX3808 1 1 1 1 3 3 1X1629 1J1189 JC2484 lX2168 JR880 1X3748 1 1 1 1 1 2 1X3724 2 lX4513 4 1X5137 X 1-1/4" JC2478 JC4254 31J2570 JC2480 JC1683 1X3822 1X3808 4 1 1 1 2 1 2 2 26 27 JR978 lX989 1 1 28 29 30 JC2628 JC2598 JC2305 lX155 1X32 1 1 8 8 8 31 32 1X927 JR882 1 1 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 R384 FSCM No. Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 4-1/2" Unloading Valve, See M7-2-1.0 900 Street Elbow, Malleable Iron, 3/8" Hose Assembly Elbow 36422 Sump Tank 36422 Pipe Plug, Square Head, Steel, 1" Breather And Dipstick Cover 36422 Pipe Plug. Square Head, Steel, 1/2" Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Gasket 36422 Strainer 36422 Magnetic Plug 90° Male Elbow, 37° Flare, Steel, 5/8" X 1/2" Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC 3B, 1/2" Male Branch Tee, 37° Flare, Steel, 1/2" X 3/8" Elbow 36422 Hose Assembly Pipe Reducer Bushing, Carbon Steel, 3/8" X 1/4" Tee 36422 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/4" X 1-3/4" (Shown) Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/4" X 3-3/4" (Far Side) Locknut, Hexagon, Low Carbon Steel, Rockwell C32, Nylon Insert, UNC-3B, 3/4" Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" Elbow 36422 Check Valve, See M7-2-2.0 Oil Filter, See M7-2-29.0 Hose Assembly Relief Valve, See M7-2-4.0 Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/2" X 4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Nipple 36422 Pipe Nipple, Standard Weight, Wrought Steel, Black 1/2" X 1-1/2" Accumulator Mounting Bracket Accumulator Assembly, See M7-1-7.0 Threaded Rod Finished Hexagon Nut, Course Thread, Carbon Steel, 3/4" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/4" 90° Street Elbow, Malleable Iron, 1/2" Tube Assembly M7-1-23.0 (2 of 2) 90483 36422 09505 36422 09505 36422 09505 90483 20859 36422 09505 90483 72968 09505 36422 09505 90483 90483 72968 72968 36422 36422 3642? 36422 90483 72968 09505 36422 36422 36422 90483 20859 09505 36422 TM 10-3950-263-14&P-3 M7-2-1.0 Parts List Unloading Valve REF. PART NO. QTY. 1 2 JC1795 1X477 1 6 3 4 JC1805 JC1806 JC1807 JC1808 JC1813 JC1801 CM285 JC1811 JC1812 JC2475 1X825 lX2169 1 1 1 4 1 1 1 1 1 1 1 1 5 6 7 8 9 10 11 12 DESCRIPTION FSCM No. Unloading Valve Assembly Capscrew, Hex Socket Head, NC-3 Threads, Heat Treated Alloy Steel, Grade 8, 3/8" X 3/4" Spring 36422 Shim, 16 Ga. 36422 Shim, 20 Ga. 36422 Shim, 28 Ga. 36422 "O" Ring 36422 Spring 36422 "O" Ring 36422 Poppet 36422 Spring 36422 Extension Plug Pipe Plug, Hex Socket, Heat Treated Alloy Steel, 3/8" Pipe Reducer Bushing, Carbon Steel, Zinc Plated, NPTF, 1/2" X 1/4" M7-2-1.0(1 of 1) 36422 90483 36422 09505 09505 TM 10-3950-263-14&P-3 M7-2-2.0 Parts List Check Valve Assembly REF. 1 2 3 4 5 6 PART NO. JC4254 JC2766 JC1812 JC4256 JC2481 1X2169 QTY. 1 1 1 1 1 1 DESCRIPTION FSCM No. Check Valve Assembly Poppet 36422 Spring 36422 Spring Guide 36422 Washer 36422 Pipe Reducer Bushing, Carbon Steel, 1/2" X 1/4" M7-2-2.0 (1 Of 1 ) 36422 90483 TM 10-3950-263-14&P-3 M7-2-4.0 Parts List Relief Valve Assembly REF. PART NO. QTY. 1 2 JC1683 1X1278 1 4 3 4 5 6 7 8 JM2599 AC1474 JC1491 SM477 JC1689 JC1690 JC1691 1 1 1 1 1 3 4 DESCRIPTION FSCM No. Relief Valve Assembly Capscrew, Hex Socket Head, NC-3 Threads, Heat Treated Alloy Steel, Grade 8, 5/16" X 3/4" "0" Ring 36422 "0" Ring 36422 Spring Cap "0" Ring 36422 Spring 36422 Shim, 20 Ga. Shim, 28 Ga. M7-2-4.0 (1 of 1) 36422 90483 36422 36422 36422 Parts List Oil Filter Assembly REF. 1 2 3 4 5 6 7 PART NO. 31J2570 31J2558 8J575 AC421 JC1874 8J586 12A892 8J615 8 9 ** QTY. 1 1 1 1 1 1 1 1 1 8C43 8J579 PX468 2 1 R1083 DESCRIPTION Oil Filter Assembly Housing Body Ball Compression Spring Round Bar Pipe Bushing Teflon Gasket (Part Of PX316 But May Be Ordered Separately)** Element (Part Of PX316 Kit But May Not Be Ordered Separately)** "0" Ring36422 Washer Kit Composed Of One Element And One Gasket M7-2-29.0 (1 Of 1) TM 10-3950-263-14&P-3 M7-2-29.0 FSCM No. 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M7-3-2.0 Parts List Selector Valve Assembly REF. 1 2 3 4 5 PART NO. QTY. 1J2220 3J716 3J717 3J718 3J715 1 2 2 1 1 DESCRIPTION FSCM No. Valve Assembly Snap Ring Quad Ring Lockwasher Control Knob * See Vendor Annex List For FSCM NO. M7-3-2.0 (1 Of 1 ) 36422 * * * * TM 10-3950-263-14&P-3 M7-4-101.1 Parts List Pressure And Return Lines M7-4-101.1 (1 of 2) TM 10-3950-263-14&P-3 Parts List Pressure And Return Lines REF. PART NO. QTY. DESCRIPTION 1 1X1149 5 2 3 4 5 6 JR862 JC2987 22J648 18J708 22J918 1X2315 5 2 1 1 1 2 7 8 9 10 11 JR861 18J718 18J286 22J1100 22J623 1X1149 2 1 1 1 1 2 12 13 14 18J282 18J543 1X1938 1 1 1 1X1153 1 15 16 17 18 19 20 21 22 23 24 25 lX1174 18J1308 22J619 1X1158 9J228 1J2661 JC2280 lX1157 22J617 18J1310 lX5176 1 1 1 2 1 1 2 1 1 1 1 26 27 28 28J587 28J560 47A760 1 1 1 R284 FSCM No. Union Tee, 370 Flare, Steel, Zinc Plated, 1/2" Cap Bracket Tube Assembly Tube Assembly Tube Assembly Tee, Female Branch, 370 Flare, Steel, Zinc Plated, 1/2" x 3/8" Plug Tube Assembly Tube Assembly Tube Assembly Tube Assembly Union Tee, 370 Flare, Steel, Zinc Plated, 1/2" Tube Assembly Tube Assembly Tee, Female Run, 370 Flare, Steel, Zinc Plated, 5/8" x 1/2" Male Connector, 370 Flare, Steel, 1/2" x 1/2" Male Elbow, 90°, 370 Flare, Steel, 5/8" x 1/2" Tube Assembly Tube Assembly Union, 370 Flare, Steel, 5/8" Tube Assembly Tube Assembly Tube Clamp 37° Union, Flare, Steel, 1/2" Tube Assembly Tube Assembly Bulkhead, Straight, Steel, Cadium Plated, ANSI Spec. B2.2-1965 Threads, 450, 5/8" Bulkhead Hose Assembly Hose Assembly M7-4-101.1 (2 of 2) 09505 36422 36422 36422 36422 36422 09505 36422 36422 36422 36422 36422 09505 36422 09505 09505 09505 36422 36422 09505 36422 36422 36422 09505 36422 36422 09505 36422 36422 36422 Parts List Cab Plumbing R1183 TM 10-3950-263-14&P-3 M7-4-144.0 NA347-A M7-4-144.0 (1 of 3) TM 10-3950-263-14&P-3 Parts List R1183 Cab Plumbing - Continued REF. PART NO. QTY. 1 22J1606 2 2 22J1608 2 3 22J1610 2 4 1X4065 1 5 1X4566 1 6 1X4304 10 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1X46 1X1157 22J973 1X2802 1X4517 22J1602 1X2194 22J1604 1X4450 1X3658 1X1149 1X3276 22J1598 22J1596 22J981 22J1734 22J990 22J998 22J936 22J935 1X4149 10 1 2 6 4 2 1 1 2 1 5 1 1 1 1 1 2 2 1 1 1 28 1X2810 2 29 30 22J986 1X4062 1 8 31 32 33 34 35 22J992 22J1732 22J987 22J996 2 1 1 1 DESCRIPTION Tube Assembly Tube Assembly Tube Assembly Lockwasher, Internal Tooth, Carbon Steel, Type A, 7/8" Bulkhead Union, Tube Fitting, 370 Flared Ends, Body W/Locknut Straight Threads Both Ends, Cadmium Plated Steel, 5/8" Bulkhead Union, Tube Fitting, 37° Flared Ends, Body W/Locknut Straight Threads Both Ends, Cadmium Plated Steel, 1/2" Lockwasher, Internal Tooth, Carbon Steel, Type A, 3/4" Union, 37° Flare, Steel, 1/2" Tube Assembly 90° Swivel Nut Elbow, 37° Flare, Steel, 1/2" X 3/4" 45° Swivel Nut Elbow, 37° Flare, Steel, 1/2" X 3/4" Tube Assembly Union Tee, 37° Flare, Steel, 5/8" Tube Assembly Tube End Reducer, 37° Flare, Steel, 5/8" X 1/2" Swivel Nut Run Tee, 37° Flare, Steel, 5/8" Union Tee, 37° Flare, Steel, 1/2" Swivel Nut Run Tee, 37° Flare, Steel, 1/2" Tube Assembly Tube Assembly Tube Assembly Tube Assembly Tube Assembly Tube Assembly Tube Assembly Tube Assembly Straight Thread Branch Tee, 37° Flare Steel W/Locknut, Washer, And "O"-Ring 1/2" X 3/4" 90°, Straight Thread Elbow Steel, W/Locknut, Washer & "0"Ring 1/2" X 3/4" Tube Assembly Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" Tube Assembly Tube Assembly Tube Assembly Tube Assembly Control Valve (See Keysheet 7-8-1.17) M7-4-144.0 (2 Of 3) FSCM No. 36422 36422 36422 20859 09505 09505 20859 09505 36422 09505 09505 36422 09505 36422 09505 09505 09505 09505 36422 36422 36422 36422 36422 36422 36422 36422 09505 09505 36422 72968 36422 36422 36422 36422 Parts List Cab Plumbing - Continued R1183 TM 10-3950-263-14&P-3 M7-4-144.0 NA347-A M7-4-144.0 (3 Of 3 ) TM 10-3950-263-14&P-3 M7-5-1.0 Parts List Pump Assembly, Left Hand REF. 1 2 3 4 5 6 7 8 9 10 PART NO. 1J2600 3J129 3J130 3J60 3J66 3J61 3J65 3J128 3A2997 1X2176 QTY. 1 4 1 1 1 1 1 1 1 1 11 12 13 14 JC1373 3J62 3J3511 lX2178 1 1 1 1 15 16 17 2161 3J79 3J67 3J80 2 1 2 1 DESCRIPTION Hydraulic Pump Assembly *See Vendor Annex List Screw For FSCFM No. 3 Cover Spring Pressure Plate Ring Rotor Body Key Ball Bearing, Single Row Radial, AFBMA Type BC, Light Series, Seals Both Sides, Non-filling Slot Assembly .7874 I.D. X 1.8504 O.D. X .5512 Snap Ring Shaft Seal Ball Bearing, Single Row, Non-filling Slot Assembly, Deep Groove, Conrad Type, AFBMA Type BC, Light Duty, Plain, .6693 I.D. X 1.5748 O.D. X .4724 Pin Van Kit "0" Ring Kit Pump Kit, Consists Of Items 6,7,16,17 M7-5-1.0 (1 Of 1 ) FSCM No. 36422 * * * * * * * * 91936 36422 * * 91936 36422 * * * TM 10-3950-263-14&P-3 M7-8-94.0 Parts List Control Valve NA239-A REF. 1 2 3 4 5 6 7 8 9 PART NO. 22J730 1J1663 AC1474 JC1491 1J577 1X2404 1X4705 1J575 1J576 8J38 8J32 QTY. 1 1 1 1 1 2 2 1 1 1 1 DESCRIPTION Control Valve Assembly Spring "0" Ring36422 Spring Cap Spring Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 1/4" X 1/2" Spring Spacer Spring Valve Cap Stop Valve Cap M7-8-94.0 (1 Of 1) FSCM No. 36422 36422 36422 36422 86157 72968 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M7-8-117.0 Parts List Control Valves REF. 1 2 3 4 5 6 PART NO. 22J697* 22J700* 22J703* 8J32 8J38 1J576 1J575 1X4705 QTY. 1 1 1 1 1 1 1 2 7 8 9 1X2404 1J577 AC1474 1J1663 2 1 1 1 DESCRIPTION Valve, Front Drum Hoist, B.H. Lowering Valve, Front Drum Lowering, B.H. Hoist Valve, Swing, Rear Drum Hoist And Lowering Valve Cap Valve Stop Compression Spring Spacer Locking Capscrew, Hex Head, UNC Class 2A Grade 5, 1/4" X 1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Compression Spring "O" Ring Spring * For Precise Location See M7-10-28.0 M7-8-117.0(1 of 1) FSCM No. 36422 36422 36422 36422 36422 36422 36422 72968 86157 36422 36422 36422 TM 10-3950-263-14&P-3 M7-8-153.0 Parts List Boom Hoist Kickout Valve REF. 1 2 3 PART NO. 22J1763 1X5923* 1X5922 QTY. 1 4 5 6 7 8 JM2599* 22J1454* 36J747* 20J772* 1X4718 1 1 2 1 1 9 1X5611 4 22J1455* 22J1758 * 2 2 10 11 2 DESCRIPTION B/H Valve Assembly "0" Ring, 90 Durometer .239" X .064" Plug-Hex Socket, "O" Ring Boss w/o O-ring, Steel, Zinc Plated, 5/16" "0" Ring36422 Rod Wiper "0" Ring36422 "0" Ring36422 Plug-Hex Socket, "O" Ring Boss w/o O-ring, Steel, Zinc Plated, 5/8" Needle Roller Bearing, Cam Follower Type, AFBMA, Type N15, Series 25, 1/2" Dia. X 5/8" Lq. Spring Actuator Pin Items Are Part Of 3X278 Seal Kit M7-8-153.0(1 of 1) FSCM No. 36422 17506 09505 36422 09505 36422 36422 36422 TM 10-3950-263-14&P-3 M7-8-198.0 Parts List Control Valve REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 22J1759 3J5985 3J5997 3J5988 3J5987 ** 3J5983 3J5996 3J5986 3J5994 3J5990 3J5991 3J5998 3J5992 3J5989 3J5995 3J5993 3J5999 3J6001 3J6002 3J6003 3J6004 QTY. 1 1 3 1 1 1 1 1 1 2 1 1 4 1 1 1 1 2 1 1 1 1 DESCRIPTION Valve Assembly Handle Capscrew Bracket Relief Assembly Body (Ref. Only) Load Check Poppet Spring Check Plug Spool Washer Stop Washer Stop Collar Capscrew End Cap Washer Centering Spring End Spacer Spool Seal Plug Assembly Plug "O" Ring Back-Up Ring M7-8-198.0 (1 Of 2) FSCM No. 36422 * * * * * * * * * * * * * * * * * * * * Parts List R883 Control Valve - Continued REF. PART NO. QTY. 22 23 24 3J6005 ** 3J5984 3X335 1 1 1 1 DESCRIPTION TM 10-3950-263-14&P-3 M7-9-37.0 FSCM No. "O" Ring Spool (Ref. Only) Pin Kit Complete Seal Kit * See Vendor Annex List For FSCFM No. ** These Items Are Not Sold Separately, Replace Entire Assembly. M7-8-198.0 (2 Of 2) * * * * Parts List R883 Master Clutch, Swing Brake And Lock Controls M7-9-37.0 (1 Of 3) TM 10-3950-263-14&P-3 M7-9-37.0 TM 10-3950-263-14&P-3 Parts List R883 Master Clutch, Swing Brake And Lock Controls REF. PART NO. QTY. DESCRIPTION 1 lX1751 1 Rollpin, Carbon Steel, 1/4" X 1-1/2" 2 1X2437 1 Rollpin, Carbon Steel, 3/8" X 1-3/4" 3 1X4214 2 Coiled Steel Journal Bearing, Carbon Steel IW/Woven Teflon Fiber I.D. Surface, 1.000" Shaft Dia. X 1.245" Housing Bore X .500" 4 12J337 1 Knob And Ring Assembly Swing Brake Control 5 22J1068 1 Knob, 1" Diameter lX2403 1 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" 6 22J1067 1 Bar, 3/8" Diameter X 2-1/2" Long 7 12J337 1 Knob And Ring Assembly Swing Lock Control 8 12J337 1 Knob And Ping Assembly, Master Clutch Control lX2301 1 Rollpin, Carbon Steel, 1/2" X 1-1/4" 9 lX5133 2 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 5/8" 10 lX97 1 Locknut, Nylon Insert, Hexagon, Low Carbon Steel, Rockwell C32 Maximum, Zinc Plated, 1/4" 11 31J663 2 Jam Nut, 3/8" L.H. Threads 12 22J725 2 Threaded Rod, 1/2" X 11.62" Long 36422 13 lX3809 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 1X661 2 Machine Screw, Flat Head, Carbon Steel, Zinc Plated, 3/8" X 2-1/4" 14 lX2508 1 Button Head Socket Capscrew, Alloy Steel, UNC-3A Threads, 3/8" X 3/4" lX3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 15 22J735 1 Core Fitting 16 1X194 2 Hexagon Jam Nut, 3/8" UNF-2B, Steel, Zinc Plated 17 1X3971 1 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 1" 18 lX5137 1 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/2" X 1-1/4" 19 22J928 2 Spacer, 16 Gauge 20 31J387 2 Bushing 21 lX4214 2 Coiled Steel Journal Bearing, Carbon Steel W/Woven Teflon Fiber I.D. Surface, 1.000" Shaft Dia. X 1.1245" Housing Bore X .500" 22 22J1321 1 Lever, Master Clutch 23 22J1322 1 Lever, Swing Lock 24 22J1053 1 Lever, Swing Brake 25 31J387 1 Bushing 26 12J344 1 Spacer, 1-1/4" Diameter 27 38J367 1 Bushing 28 22J928 2 Spacer, 16 Gauge 29 22J723 1 Bell Crank 30 22J718 1 Bell Crank 31 18J103 1 Spring, 1/2" O.D., 3/32" X 7/8" 32 1X4705 1 Locking Capscrew, Hex Head, UNC Class-2A - Grade 5, 1/4" X 1/2" 33 lX1412 2 Hex Socket Set Screw, Half Dog Point, NFC-3 Threads, Heat Treated Alloy Steel, Natural, 3/8" X 1" 34 28J144 1 Brake Drum 35 22J958 1 Brake Band Assembly M7-9-37.0 (2 of 3) FSCM No. 09505 09505 80657 36422 36422 86157 36422 36422 36422 09505 72968 72968 36422 72968 90483 90483 72968 36422 90483 72968 72968 36422 36422 80657 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 72968 90483 36422 36422 Parts List R883 Master Clutch, Swing Brake And Lock Controls - Continued REF. PART NO. QTY. DESCRIPTION 36 1X182 2 Finished Hexagon Jam Nut, Coarse Thread, Steel Zinc Plated, 3/8" 37 22J677 1 Shaft, 1" Diameter X 4-1/8" 38 22J715 1 Bell Crank 39 1X2047 2 Rollpin, Carbon Steel, 3/8" X 1" 40 22J751 1 Link 41 22J1320 1 Shaft, 1" Diameter X 4-1/8" 42 1X2047 3 Rollpin, Carbon, Steel, 3/8" X 1" 43 31J432 2 Rod End Ball Joint Female 44 1X4166 1 Rollpin, Carbon Steel, 3/16" X 1-3/4" 45 22J719 1 Toggle Link, 1/2" X 3/4" X 2-1/4" 46 1X196 1 Hexagon Jam Nut, 1/2" UNF-2B, Steel, Zinc Plated 47 28J1739 1 Adjusting Nut, 1/2" 48 22J720 1 Toggle Link Pin 49 1X2193 2 Rollpin, Carbon Steel, 1/2" X 1" 50 22J681 1 Control Bracket 51 22J730 1 Control Valve, See M7-8-94.0 52 22J1074 1 Rod 53 13H121 1 Spring 54 1X2810 1 900 Straight Thread Elbow, Steel, W/Locknut, Washer, And "O" Ring, 1/2" X 3/4" 55 39J293 2 Ball Joint 56 LX3809 1 Locknut, Hexagon Low Carbon Steel, Zinc Plated, Rockwell C32 Nylon Insert, UNC-3B, 3/8" 1X3599 1 Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 1-1/4" 57 22J1071 1 Bracket, 10 Gauge 58 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 1X2574 1 Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1" 59 1X3809 1 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 1X3717 1 Capscrew, Hex Head, UNC Class-2A - Grade 5, 3/8" X 3/4" 60 22J752 1 Bell Crank Bracket 61 lX2404 2 Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" 62 1X1080 2 Cotter Pin, Extended Prong, Square Cut, 1/16" X 1/2" 63 1X2301 1 Rollpin, Carbon Steel, Natural, 1/2" X 1-1/4" 64 22J734 2 Ball Joint 65 22J750 1 Bar, 1/4" X 3/4" X 6-1/2" 66 For Continuation, See M6-17-30.0 67 22J1075 1 Cable M7-9-37.0 (3 Of 3) TM 10-3950-263-14&P-3 M7-9-37.0 FSCM No. 90483 36422 36422 09505 36422 36422 09505 36422 09505 36422 90483 36422 36422 09505 36422 36422 36422 09505 36422 72968 90483 36422 72968 90483 72968 90483 36422 86157 20859 09505 36422 36422 36422 TM 10-3950-263-14&P-3 M7-9-41.0 Parts List Pawl Control Cable REF. 1 2 3 4 PART NO. lX5300 X 1/2" 1X4 22J1745 22J1094 22J1121 22J1744 QTY. 4 2 1 1 1 1 DESCRIPTION Locking Capscrew, Hex Head, UNC Class 2A- Grade 5, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Bracket Boom Hoist Pawl Control Rubber Grommet Pawl Control Label, Not Shown M7-9-41.0 (1 Of 1 ) FSCM No. 72968 86157 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M7-9-44.0 Parts List Control Lever REF. 1 2 3 4 5 6 7 PART NO. 18J1478 18J1506 18J1463 18J1464 18J1469 18J1470 850005001 QTY. 1 2 1 1 4 2 AR 8 9 10 11 1 2 3 4 5 6 7 28J1596 31J387 18J1474 18J1505 18J1480 18J1506 18J146 18J1464 18J1469 18J1470 850005001 1 1 1 1 1 2 3 1 4 2 AR DESCRIPTION Lever Assembly, Front Drum Solenoid Assembly Handle, Right Half Handle, Left Half Plastic Fastener Plastic Fastener Clear Polyethylene Tubing 1/4" O.D., Black, per MIL-E-5400F Terminal Bushing Control Lever Plug Lever Assembly, Rear Drum Solenoid Assembly 1 Handle, Right Half Handle, Left Half Plastic Fastener Plastic Fastener Clear Polyethylene Tubing 1/4" O.D., Black per MIL-E-5400F M7-9-44.0(1 of 2) FSCM No. 36422 36422 36422 36422 36422 36422 06229 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 06229 TM 10-3950-263-14&P-3 Parts List Control Lever - Continued REF. PART NO. QTY. 8 28J1596 1 9 31J387 1 10 18J1475 1 11 18J1505 1 DESCRIPTION Terminal Bushing Control Lever Plug FSCM No. 36422 36422 36422 36422 1 3 4 5 6 9 10 11 18J1487 18J1463 18J1464 18J1469 18J1470 31J387 18J1476 18J1505 1 1 1 4 2 1 1 1 Lever Assembly, B.H Handle, Right Half Handle, Left Half Plastic Fastener Plastic Fastener Bushing Control Lever Plug 36422 36422 36422 36422 36422 36422 36422 36422 12 13 14 15 16 22J1066 12J337 1X2301 22J1064 31J387 1 1 1 1 1 Lever Assembly, Swing Knob & Ring Assembly Rollpin Lever Bushing 36422 36422 36422 36422 36422 M7-9-44.0(2 of 2) TM 10-3950-263-14&P-3 M7-10-28.0 Parts List Control Stand W375-C M7-10-28.0 (1 Of 4) TM 10-3950-263-14&P-3 Parts List Control Stand - Continued REF. PART NO. QTY. 1 2 1X2193 4 3 22J714 2 4 1X196 2 5 8J37 2 6 22J713 2 7 22J703 1 8 1X2756 1 9 10 11 22J943 22J942 1X4304 1 1 2 12 1X2810 1 13 1X5131 2 14 1X4550 4 15 16 22J703 1X5214 1 4 17 18 19 1X2117 22J458 1X4244 1 1 1 20 21 22 23 24 25 22J459 22J461 1X1086 22J934 31J1007 1X5329 1 1 4 4 8 4 DESCRIPTION Swing Lever, Ref., See Keysheet M7-9-44.0 Rollpin, Carbon Steel, 1/2" X 1" Toggle Link Hexagon Jam Nut, 1/2", UNF-2B, Zinc Plated Nut Toggle Link Lowering Valve, See Keysheet M7-8-117.0 Connector, Straight Thread, Steel, Zinc Plated W/ "0"Ring, 1/2" X 3/4" Tube Assembly Tube Assembly Bulkhead Union, Tube Fitting, 370 Flared Ends, Body W/Locknut, Straight Threads Both Ends, Cadmium Plated, Steel, 1/2" 90°, Straight Thread Elbow, Steel, W/Locknut, Washer, And "O"-Ring, 1/2" X 3/4" Locking Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-1/4" Connector, Straight Thread, Steel, Zinc Plated, W/ "0"Ring, 1/2" Tube O.D. X 9/16" to 3/4" Hoist Valve, See Keysheet, M7-8-117.0 Locking Capscrew, Hex Head, UNC Class-2A-Grade 5, 3/8" X 1-3/4" Rollpin, Carbon Steel, 1/2" X 4" Hub Capscrew, 12 Point Head, UNC Coarse Thread, Black Satin Finish, W/Plastic Patch, 1/2" X 3" Hub Bar Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Stop Pin (Use With Valve Blank Only) "O"-Ring Capscrew, 12 Point Head, UNC Coarse Thread, Black Satin Finish, W/Plastic Patch Note: Valve Blanks Not Shown: 22J705 22J706 2 2 Valve Blank Valve Blank M7-10-28.0 (2 Of 4) FSCM No. 09505 36422 90483 36422 36422 09505 36422 36422 09505 09505 72968 09505 72968 09505 36422 36422 36422 20859 36422 36422 72968 TM 10-3950-263-14&P-3 Parts List M9-14-15.0 Deflector Rollers KA299-A REF. 1 2 3 4 5 6 7 8 PART NO. QTY. 9M1757 18J5 22M888 22M489 1X3718 2 4 2 2 8 1X30 8 1X153 9M1752 12M426 19M794 1X3728 1X28 8 2 4 4 8 8 1X151 8 DESCRIPTION FSCM No. Deflector Roller Bearing Deflector Roller Guard (At Top Of Peak Section) Deflector Roller (At Bottom Of Peak Section) Capscrew, Hex Head, UNC-Class 2A, Grade 5, Zinc Plated, 1/2" X 1-3/4" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 1/2" Finished Hexagon Nut, Coarse Thread, Carbon Steel, 1/2" Deflector Roller Bearing Deflector Roller Guard Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1-3/4" Spring Lockwasher, Medium Series, Carbon Steel, Natural, 3/8" Finished Hexagon Nut, Coarse Thread, Carbon Steel, 3/8" M9-14-15.0(1 of 1) 36422 36422 36422 36422 90483 20859 90483 36422 36422 36422 90483 20859 90483 TM 10-3950-263-14&P-3 Parts List R284 M14-1-92.0 House Assembly REF. 1 2 3 4 . 5 PART NO. QTY. 22N1340 1X2574 1 AR 1X4 AR 1X3809 AR 804016002 22N1192 AC5493 1X2 1X5079 AR 1 AR AR AR 28N576 28N1495 1X5873 2 1 4 22N1110 1X3918 1 AR DESCRIPTION FSCM No. Nose Cone Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon, Steel Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Door Capscrew Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plug Button Lock, Door, Paddle Handle Blind Rivet, Cadmium Plated - Open End, Rivet And Mandrel - Carbon Steel, Domed Type Head, 5/32" X 254" Lg. Right Font Platform Cover Locking Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" M14-1-92.0 (1 of 8) 36422 90483 86157 72968 34359 36422 36422 86157 72968 36422 19220 09505 36422 72968 TM 10-3950-263-14&P-3 Parts List 284 House Assembly- Continued REF. PART NO. QTY. DESCRIPTION 1X4 1X3718 AR AR 1X6. 1X3808 AR AR 22N1630 1X3357 1 AR 1X4 1X3809 AR AR 22N1328 22N1338 1X3357 1X4 1 1 AR AR 1X3809 AR 22N1327 22N1336 1X3357 X 1-1/2" 1X4 1X3809 1 1 AR 22N1326 22N1334 1X3357 1 1 AR 1X4 1X3809 AR AR 22N1330 1X3357 4 AR 1X4 1X3809 AR AR 14 15 22N1325 28N884 1X4638 6 20 20 16 28N1495 1X5873 11 44 28N1546 22N559 1X4 4 11 AR 1X3256 AR 6 7 8 9 10 11 12 13 AR AR FSCM No. Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 1/2" X 1-3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Right Platform Cover Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Door Vertical Frame Member Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Door Vertical Frame Member Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Door Vertical Frame Member Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plate d, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Vertical Frame Member Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Door Rubber Headed Bumper Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Lock, Door, Paddle Handle Blind Rivet, Cadmium Plated - Open End, Rivet And Mandrel - Carbon Steel, Domed Type Head, 5/32" X .254" LG. Door Key Door Catch Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" (Use As Shim) Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 2-1/2" M14-1-9Z.0 (2 of 8) 86157 90483 86157 72968 36422 90483 86157 72968 36422 36422 90a83 86157 72968 36422 36422 90483 86157 72968 36422 36422 90483 86157 72968 36422 90483 86157 72968 36422 36422 72968 19220 09505 19220 36422 86157 90483 TM 10-3950-263-14&P-3 Parts List P224 M14-1-92.0 House Assembly - Continued REF. PART NO. QTY. 1X4 1X3809 AR AR 18 22N1350 22N630 1X182 1 2 AR 19 1X78 1X4 22N661 22N684 1X3599 AR AR 1 1 AR 1X4 1X3809 AR AR 804016002 22N683 l1X4062 AR 2 AR 1X4 AR 20 DESCRIPTION FSCM No. Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Right Rear Roof Section B/H Planetary Cover Finished Hexagon Jam Nut, Coarse Thread, Steel Zinc Plated, 3/8" Wing Nut, Nylon Insert, Zamak Alloy, Unplated, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Center Rear Roof Section Sheet Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel,. Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Cover Locking Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" M14-1-92.0 (3 of 8) 86157 72968 36422 36422 90483 90483 86157 36422 90483 86157 ,2968 34359 36422 72968 86157 TM 10-3950-263-14&P-3 Parts List R284 House Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1X3599 AR 1X4 1X3809 AR AR 804016002 22N642 NC1186 25N297 1X3809 AR 1 AR AR AR 1X4 22N714 AC5493 1X5079 AR 1 AR AR 1X77 1X2 824017009 AR AR AR 22N687 1X3599 AR AR 1X4 1X3809 AR AR 25 26 804016002 22N633 22N707 1X4062 AR 1 1 AR 27 28 1X4 804016002 22N644 22N696 AC5493 1X5079 AR AR 1 1 AR AR 824017009 AR 22N625 1X2574 1 AR 1X4 1X3809 AR AR 21 22 23 24 29 30 804016002 AR 22N1360 1X2574 X 1" 1X4 1X3809 1 AR AR AR FSCM No. Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Left Rear Roof Section Rubber Washer Door Latch Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" B/H Brake Cover Capscrew Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Wing Nut, Nylon Insert, Zanak Alloy, Unplated, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" "U" Channel, Black, Extruded Rubber, Outside Leg Corners Radial Left Inside Roof Section Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Left Center Roof Section Left Inside Roof Locking Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Inside Panel Brake Ventilator Door Capscrew Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" "U" Channel; Black, Extruded Rubber, Outside Leg Corner Radial Left Front Roof Section Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Pla ted, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Cab Mount Cover Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" M14-1-92.0 (4 of 8) 90483 86157 72968 34359 36422 36422 36422 72968 86157 36422 36422 72968 90483 86157 82654 36422 90483 86157 72968 34359 36422 36422 72968 86157 34359 36422 36422 36422 72968 82654 36422 90483 86157 72968 36359 36422 90483 86157 72968 TM 10-3950-263-14&P-3 Parts List R284 House Assembly - Continued REF. PART NO. QTY. DESCRIPTION 31 32 33 34 35 36 37 38 39 40 41 42 43 44 22N645 22N689 22N657 22N712 1X2574 1 1 1 1 AR 1X4 1X3809 AR AR 804016002 22N697 22N720 lX3599 AR 1 1 AR 1X4 1X3809 AR AR 22N716 19N680 1X3357 1 1 AR 1X4 1X3809 AR AR 804016002 AR 22N762 1X4062 1 AR 1X4 804016002 22N666 22N670 1X78 AR AR 1 2 AR 1X4 804016002 22N1482 22N1498 X3599 AR AR 1 1 AR 1X3809 AR 1X4 804016002 18N253 1X3357 AR AR 1 AR 1X4 lX3809 AR AR 22N1186 AC5493 2 AR M14-1-92.0 FSCM No. Inside Panel Upper Inside Roof Section Right Center Roof Section Inside Roof Section Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Sheet Lower Right Inside Section Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Lower Left Inside Section Front Cover Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Sheet Locking Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Right Front Roof Section Panel Wing Nut, Nylon Insert, Zamak Alloy Unplated, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Right Rear Corner Post Rear Plate Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Angle Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Rear Door Capscrew M14-1-92.0 (5 of 8) 36422 36422 36422 36422 90483 86157 72968 36359 36422 36422 90483 86157 72968 36422 36422 90483 86157 72968 34359 36422 72968 86157 36359 36422 36422 90483 86157 34359 36422 36422 90483 72968 86157 34359 36422 90483 86157 72968 36422 36422 TM 10-3950-263-14&P-3 Parts List R284 House Assembly- Continued REF. PART NO. QTY. DESCRIPTION 1X5079 AR 22N1029 1X2574 1 AR 1X4 1X3809 804016002 22N1484 22N1332 22N1632 1X3718 AR AR AR AR 1 1 1 AR 1X6 1X3808 AR AR 22N570 22N569 1X3599 1 1 AR 1X4 1X3809 AR AR 28N653 1X4062 1 2 AR 1X4 18A2816 1X6804 lX6081 AR 2 4 2 54 18A2816 1X6804 1X6081 2 2 2 55 56 22N532 lX182 1 1 57 58 59 18N94 22N704 1P537 lX1302 22N698 1X3721 1 1 1 2 2 2 1X6804 1X6081 4 2 45 46 47 48 49 50 51 52 53 60 61 FSCM No. Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Rear Panel Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Adhesive Vinyl Foam Tape Rear Corner Post Vertical Frame Member Left Platform Cover Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 1/2" X 1-3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Ladder Panel Ladder Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Operator’s Cab - See Keysheet M14-1-126.0 Grab Bar Locking Capscrew, Hexagon Head, UNC Class 2A, Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Capscrew Washer, High Strength, Carbon Steel, 3/8" Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34 UNC-3B, 3/8" Capscrew Washer, High Strength, Carbon Steel, 3/8" Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34 UNC-3B, 3/8" Par Finished Hexagon Jam Nut, Coarse Thread, Steel Zinc Plated, 3/8" Toggle Lever 16427 Bar Pin Cotter Pin, Extended Prong, Square Cut, 3/32" X 3/4" Angle Capscrew, Hexagon Head, UNC Class 2A-Grade 8, Steel, 3/8" X 1-1/2" Washer, High Strength, Carbon Steel, 3/8" Locknut, Nylon Insert, High Tensile, Medium Carbon Steel, Rockwell C25-34 UNC-3B, 3/8" M14-1-92.0 (6 of 8) 72968 36422 90483 86157 72968 36359 36422 36422 36422 90483 86157 72968 36422 36422 90483 86157 72968 36422 72968 86157 36422 86157 72968 36422 86157 72968 36422 90483 36422 36422 20859 36422 90483 86157 72968 TM 10-3950-263-14&P-3 Parts List R284 House Assembly - Continued M14-1-92.0 (7 of 8) M14-1-92.0 TM 10-3950-263-14&P-3 Parts List R284 Live Mast Lines - Continued REF. PART NO. QTY. DESCRIPTION 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 22N702 1P537 1X6955 1X1302 22N705 22Nl106 804016002 AR 1X77 2 1 4 2 1 2 6 1X3775 13H121 1X5080 8 8 8 1X1358 22 1X2 1X5079 22 22 28N1491 1X1086 28N1493 1X1358 11 11 11 14 1X2 1X5079 14 14 22N1342 28N1493 1X1086 HC105 1X1080 18N914 HC105 1X1080 28N1553 1X1358 7 7 7 7 7 7 1 1 1 2 1X2 1X5079 2 2 18N914 1 FSCM No. Bar Pin Washer, High Strength, Carbon Steel, 5/16" Cotter Pin, Extended Prong, Square Cut, 3/32" X 3/4" Lever Cover Adhesive Vinyl Foam Tape Wing Nut, Nylon Insert, Zanak Alloy, Unplated, 1/4" Door Edge, Ref. Only Capscrew, Hex Head, UNC Class 2A Grade 5, 5/16" X 3-1/2" Spring Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Bolt Bolt, Round Head, Square Neck, Steel, Zinc Plated, UNC-2A, 1/4" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Hinge Bracket Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Pin Bolt, Round Head, Square Neck, Steel, Zinc Plated, UNC-2A, 1/4" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Hinge Bracket Pin Cotter Pin, Extended Prong, Square Cut, 1/8" X 1" Yoke Pin Cotter Pin, Extended Prong, Square Cut, 1/16" X 1/2" Latch Yoke Pin Cotter Pin, Extended Prong, Square Cut, 1/16" X 1/2" Hinge Bolt, Round Head Square Neck, Steel, Zinc Plated, UNC-2A, 1/4" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Latch M14-1-92.0 (8 of 8) 36422 36422 86157 20859 36422 36422 34359 90483 90483 36422 72968 90483 86157 72968 36422 20859 36422 90483 86157 72968 36422 36422 20859 36422 20859 36422 36422 20859 36422 90483 86157 72968 36422 TM 10-3950-263-14&P-3 Parts List Mirror REF. 1 PART NO. R482 QTY. 1X2919 1X5080 2 2 2 3 1X3 22N1061 22N1062 JC2280 1X3821 1X5080 2 2 1 1 1 1 4 5 45P91 22N1065 1 1 DESCRIPTION M14-1-124.0 FSCM No. Capscrew, Hex Head, UNC Class 2A-Grade 5, 5/16" X 1-1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Fiber Washer Upper Arm C amp Capscrew, Hex Head, UNC Class-2A-Grade 5, 5/16" X 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Mirror Lower Arm M14-1-124.0 (1 Of 1) 90483 72968 86157 36422 36422 36422 90483 72968 36422 36422 TM 10-3950-263-14&P-3 Parts List R284 Cab And Mount M14-1-126.0 (1 of 8) M14-1-126.0 TM 10-3950-263-14&P-3 Parts List R284 Cab and Mount - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 22N1089 18N1239 22N1102 18N1244 1X3819 1X2 18N1020 1X3819 13H415 1X2 1X2404 1X5079 1 1 2 1 8 8 1 1 1 2 22N1086 824015001 18N1233 1X5080 AR 2 2 1X4478 2 AC5493 1X5079 4 4 1X2 22N1100 18N1139 824015001 22N1400 9N254 9N255 22N1438 9J556 22N1232 1X3283 1X3837 4 1 1 AR 1 2 2 1 1 1 4 4 1X10 22N1432 9N255 8N125 9N254 22N1433 22N1434 AC5493 lX5079 8 2 12 12 12 2 1 6 6 1X2 1X3599 1X4 6 2 2 FSCM No. Note: If Parts Are To Be Carbo-Zinc Primed, Add CZ The Part Number (I.E., 22N1432CA) Overhead Window (See Page 3) Roof Window Frame Gas Spring Left Roof Hatch Cover Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 5/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Upper Door Track 2 Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 5/8" 2 "0" Ring Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" 1 Right Side Window Locking Weatherseal, Self-Sealing, Gray Neoprene, 9/16" Angle Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Hex Socket Head Shoulder Screw, Stripper Bolts, NC-3 Threads, Alloy Steel, 3/8" X 3/8" Capscrew Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Right Side Window Left Side Window Locking Weatherseal, Self-Sealing, Gray Neoprene, 9/16" Panel Speed Nut Wing Head Screw Right Access Cover Plug Cab Mount Capscrew, Hex Head, UNC Class 2A - Grade 5, 1" X 2-3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1" Cover Wing Head Screw Washer Speed Nut Cover Hinge Capscrew Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" M14-1-126.0 (2 Of 8) To 36422 36422 36422 36422 90483 86157 36422 90483 36422 86157 86157 72968 36422 36522 72968 90483 36422 72968 86157 36422 36422 36422 36422 36422 36422 36422 36422 90483 72968 86157 36422 36422 36422 36422 36422 36422 36422 72968 86157 90483 86157 TM 10-3950-263-14&P-3 Parts List R284 Cab And Mount - Continued M14-1-126.0 (3 of 8) M14-1-126.0 TM 10-3950-263-14&P-3 Parts List R284 Live Mast Lines - Continued REF. PART NO. QTY. DESCRIPTION 1X38092 18 1X4477 6 22N1003 18N1033 22N1463 1X3599 1X4 1X3809 6 1 2 4 4 4 21 22 18N1021 18N1037 1X3599 1X4 1X3809 2 1 4 4 4 23 24 22N1439 18N1035 1X5138 1 1 1 1X6 1X3302 1X6 1X3808 1 1 1 2 22N1420 18N1140 824015001 824024001 1 1 AR AR 28 22N1428 1X5405 1 4 29 22N1120 22N1183 1X3532 4 2 2 30 31 32 22N1090 824001001 lX5405 1 AR 16 33 34 22N895 824007001 1 AR 35 36 37 22N896 22N1091 824030003 1 1 AR 38 39 - 22N1173 22N1114 22N1115 1 2 4 19 20 25 26 27 FSCM No. Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Button Head Socket Capscrew, Alloy Steel, UNC-3A Threads 1/4" X 3/4" Screw Receptacle Bracket Bracket Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Lower Door Track Bracket Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1-1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Left Access Cover Bracket Locking Capscrew, Hex Head UNC Class 2A - Grade 5, 1/2" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/2" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert UNC-3B, 1/2" Door Door Window Locking Weatherseal, Self-Sealing, Gray Neoprene, 9/16" Weather-stripping Tape, Auto Glass Sealant, Rd Tape, 5/16" Dia. Window Channel Hex Head Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, #10 X 1/2" Bumper Grommet Window Stop 36422 Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 5/8" Lower Front Window Edge Channel weather-strip Hex Head Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, #10 X 1/2" Window Guide Beaded Glass Run Channel, Stainless Steel, Wood Pile Fabric Lining On Sides, Polypropylene Plastic Strip On Bottom Of Channel Run Window Guide Upper Front Window Channel Stripping, Glass Setting Tape, Composition Rubber, Low Compressibility, Tacky Sealer Finger Left Latch Strike Grommet M14-1-126.0 (4 Of 8) 72968 90483 36422 36422 36422 90483 86157 72968 36422 36422 90483 86157 72968 36422 36422 72968 86157 90483 86157 72968 36422 36422 36422 90483 36422 90483 36422 70483 90483 36422 82654 36422 36422 82654 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List R284 Cab And Mount - Continued M14-1-126.0 (5 of 8) M14-1-126.0 TM 10-3950-263-14&P-3 Parts List R284 Cab And Mount- Continued REF. PART NO. QTY. DESCRIPTION 1X54354 1X2937 1X5091 4 4 40 824018006 AR 41 22N909 1X5313 2 4 42 43 44 28N169 18N1041 1X4705 2 6 2 45 1X5080 2 46 47 48 49 1X3819 22N1409 1X2 1X181 2 2 4 1 50 1X5079 2 51 1X4371 1 52 1X1872 1 18N1061 1X3819 1X2 18N1076 1X2574 1X3809 1 1 1 1 1 1 1X4 22N1413 1X4371 2 1 4 1X3816 4 18N1061 1X1 18N1277 1X4895 4 4 2 4 lX2134 2 53 54 55 56 57 58 59 60 FSCM No. Machine Screw, Round Head, Carbon Steel ASTM A307, Zinc Plated, #6 X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated #6 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #6 Weather-Strip, Door Seal, Extruded Rubber "P" Strip, Hollow Bulb, Neoprene Latch Screw W/Nylon Washer, Phillips Drive Pan Head, Recessed, Type AB Thread, Quality Steel-Heat Treaded, Cadmium Plated, #10 X 1/2" Knob Ball Joint Assembly Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 5/8" Mount Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Finished Hexagon Jam Nut, Coarse Thread, Steel, Zinc Plated, 5/16" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Ball Bearing, Single Row Radial, Underground Extended Inner Race, Seal One Side Balls - High Carbon Chromium Steel Race - 1020 CRS With Harden Raceways, 7/16" I.D. X 1-3/8" O. D. X 7/16" Hex Socket Head, Shoulder Screw, Stripper Bolts, NC-3 Threads, Alloy Steel, 5/16" X 3/8" X 1" Tolerance Ring Capscrew, Hex Head, UNC Class 2A - Grade 5, 1/4" X 5/8" Plain Washer, Hot Rolled Mild Steel, Z inc Plated, 1/4" Striker Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Latch Ball Bearing, Single Row Radial, Ungrounded Extended Inner Race, Seal One Side, Balls - High Carbon Chromium Steel, Race - 1020 CRS With Harden Raceways, 7/16" I.D. X 1-3/8" O. D. X 7/16" Blind Rivet, Closed End, Rivet And Mandrel - Aluminum Plain Finish, Domed Type Head, 3/16" Tolerance Ring Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/16" Roller Support Nylon Flanged Bearing, Outside Diameter Of Flange Has Four Molded Notches, Outside Diameter Of Bearing Sleeve Portion Has Diagonal Slot, 5-1/8" I.D. X 5/8" Lg. Truarc Retaining Ring, External, Phosphate Coated, 5/8" M14-1-126.0 (6 Of 8) 90483 86157 72968 70485 36422 90483 36422 36422 72968 72968 90483 36422 86157 90483 72968 91936 90483 36422 90483 86157 36422 90483 72968 86157 36422 91936 09505 36422 86157 36422 19382 79136 TM 10-3950-263-14&P-3 Parts List R284 Cab Mount- Continued REF. PART NO. QTY. 61 1X622 4 1X4638 4 62 63 64 18N1067 22N1402 1X647 1 1 2 65 66 67 68 22N1425 22N1423 lX19 36N208 1X622 1 1 1 1 4 1X19 1X4638 4 4 lX1081 18A1661 32N456 32P165 22P1355 22P1658 22P1673 22J745 22P1614 22J1019 1X2248 1 2 1 1 1 1 1 1 1 1 1 1X2404 22P1530 22N1072 22N995 1X622 1 1 2 2 4 1X623 4 1X4638 4 82 83 22N1036 NC1187 22N1OO5 22N1473 lX5314 4 4 4 1 16 84 85 22N1474 1X5313 1 6 86 87 22N972 1X629 2 1 69 70 71 72 73 74 75 76 77 78 79 80 81 DESCRIPTION M 14-1-126.0 FSCM No. Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Latch Connecting Rod Machine Screw, Flat Head, Carbon Steel, Zinc Plated, #10 90483 X 5/8" Lock Handle Latch Pin Plain Washer, Hot Rolled Mild Steel, Zinc Plated, #12 Door Latch W/Handle Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, #12 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Cotter Pin, Extended Prong, Square Cut, 1/16" X 1" Tap Screw Capacity Chart Bracket Label, Jib Capacity Chart Working Range Plate Counterweight Inst. Plate HC-238A Label, Hand Throttle Fuel Shutdown Bracket Label, GM Engine Only Throttle Cover Hex Head, Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, 1/4" X 1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Label, Warning And Danger Arm Rest Hinge Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 1/2" Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, #10 X 3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, #10 Knob Assembly Washer Spacer Rt. Rear Console Panel Screw, Pan Head W/Nylon Washer, Phillips Drive Head, Corrosion Resistant Steel, Passivated, UNC-2A, Threads, 1/4" X 5/8" Left Rear Console Panel Screw, W/Nylon Washer, Phillips Drive Pan Head, Recessed, Type AB Thread, Quality Steel-Heat Treated, Cadmium Plated, #10 X 1/2" Storage Compartment Machine Screw, Round Head, Carbon Steel, ASTM A307, Zinc Plated, 1/4" X 3/4" M14-1-126.0 (7 Of 8) 90483 72968 36422 36422 36422 86157 36422 90483 86157 72968 20859 36422 36422 36422 36422 36422 36422 36422 36422 36422 90483 86157 36422 36422 36422 90483 90483 72968 36422 36422 36422 36422 90483 36422 90483 36422 90483 TM 10-3950-263-14&P-3 Parts List R284 Cab and Mount - Continued REF. PART NO. QTY. DESCRIPTION 1X50791 1X2404 22N968 22N993 22N969 28N1380 22P1674 22N1001 22P1676 22N990 1X2760 1 1 1 1 1 1 1 1 2 4 22N1136 22P1671 22P1672 22P1670 22P1675 32J3383 22P1635 47N77 22N1466 20P51 1X4410 1 1 1 1 1 1 2 2 1 1 4 102 22N1048 1X3317 1 5 103 22N1370 1 88 89 90 91 92 93 94 95 96 97 98 99 100 101 FSCM No. Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/4" Left Forward Console - Rt. Half Trim Strap Left Forward Console - Left Half Plate Label Plate Label, Left Rear Control Trim Strap Hex Head, Tapping Screw, Thread Cutting Type, Steel, Zinc Plated, 3/8" X 3/4" Right Forward Console Panel Label, R.H. Swing Brake Release Label, R.H. Swing Brake Apply Label Label, Right Rear Control Label - Information Label - Lube Control Valves Plug Button Insulation Fire Extinguisher Blind Rivet, Cadmium Plated - Open End, Rivet & Mandrel Carbon Steel, Domed Type Head, 3/16" X .402" Trim Strip Tapping Screw, Hex Head, Thread Cutting Type, Steel, Zinc Plated, UNC-2A, #8 X 1/2" Floormat36422 M14-1-126.0 (8 Of 8) 72968 86157 36422 36422 36422 36422 36422 36422 36422 36422 90483 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 09505 36422 90483 TM 10-3950-263-14&P-3 Parts List R783 Left And Right Drum Guards M14-2-24.0 (1 of 2) M14-2-24.0 TM 10-3950-263-14&P-3 Parts List R284 Live Mast Lines - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 22N78 22N1506 22N102 1X3971 2 1 1 AR 5 1X4 1X4062 AR AR 1X4 804016002 22N81 22N678 1X2574 1X4 1X3809 AR AR 1 1 AR AR AR 18N816 1X3971 1 1 1X4 22N673 22N361 22N363 19B206 1X3971 1 1 1 1 1 1 6 7 8 9 10 11 12 13 1X4 1 14 15 16 22N78 22N1504 1X4062 4 1 AR AR 17 18 1X4 804016002 AR 22N680 1X3971 3/8" X 1" lX4 AR 19 1X2574 1X4 1X3809 AR AR AR 20 21 22N614 1X3781 1X4 22N344 22N677 19B206 1X3971 1 1 2 1 1 1 1 1X4 1 22 23 24 1 AR FSCM No. Front And Rear Drum Guard Lower Right Drum Guard Right Hand Front Drum Guard Locking Capscrew, Hex Head, UNC Class 2A, Grade 5 3/8" X 1" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Right Hand Rear Drum Guard Upper Right Drum Guard Capscrew, Hex Head, UNC Class 2A-Grade, 3/8" X 1" Plain Washer, Hot Ro lled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Bar 36422 Locking Capscrew, Hex Head, UNC Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Cover Guard Swing Shaft Brake Drum Guard Angle Locking Capscrew, Hex Head, UNC, Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Left Side Drum Guard Front And Rear Drum Guard Lower Left Drum Guard Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 3/4" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Adhesive Vinyl Foam Tape Upper Left Drum Guard Locking Capscrew, Hex Head, UNC, Class 2A, Grade 5, Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" (Use As Shim) Capscrew, Hex Head, UNC Class 2A - Grade, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Bar Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1/2" Plain Washer, Hot Rolled Mild St eel, Zinc Plated, 3/8" Cover Cover Angle Locking Capscrew, Hex Head, UNC, Class 2A, Grade 5, 3/8" X 1" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" M14-2-24.0 (2 of 2) 36422 36422 36422 72968 86157 72968 86157 34359 36422 36422 90483 86157 72968 72968 86157 36422 36422 36422 36422 72968 86157 36422 36422 72968 86157 34359 36422 72968 86157 90483 86157 72968 36422 90483 86157 36422 36422 36422 72968 86157 TM 10-3950-263-14&P-3 Parts List R482 M14-5-34.0 Catwalk Assembly REF. PART NO. QTY. 1 SE50 1X6786 10 20 2 18N1202 18N1207 18N1222 18N1216 18N1208 18N1218 18N1213 18M273 18N1217 1X6796 1 2 1 4 1 1 4 8 3 8 22N208 22N209 1X2573 2 4 8 3 4 5 6 7 8 9 10 11 12 DESCRIPTION FSCM No. U-Bolt Locknut, Zinc Plated, Chromate Treated, UNC-2B, Class A, 3/8" Front Catwalk Support Spacer Front Catwalk Catwalk Support Tube Front Side Catwalk Rear side Catwalk End Cap Lock Pin Catwalk Base Tube Capscrew, Hex Head, UNC-3A ANSI Spec. Bl.1, Grade 5, 3/8" X 1-3/4" Operator’s Cab, See Key sheet M14-1-126.0 House Assembly, See Key sheet M14-1-92.0 The Following Items Are Used, But Not Shown: Grab Handle Tube Grab Handle Bracket Capscrew, Hex Head, UNF - Class 2A - Grade 5, Zinc Plated, 5/16" X 1" M14-5-34.0 (1 Of 2) 36422 72698 36422 36422 36422 36422 36422 36422 36422 36422 36422 90483 36422 36422 90483 TM 10-3950-263-14&P-3 Parts List R284 Catwalk Assembly- Continued REF. PART NO. QTY. DESCRIPTION 1X3 1X5080 8 8 FSCM No. Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 5/16" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 5/16" M14-5-34.0 (2 of 2) 86157 72968 TM 10-3950-263-14&P-3 Parts List R482 M16-4-22.0 FSCM NO. 36422 36422 36422 FSCM NO. 36422 36422 36422 36422 M 16-4-22.0 (1 OF 1) TM 10-3950-263-14&P-3 Parts List M18-1-2.0 Crane Boom Angle Indicator REF. PART NO. QTY. 1 2 3 4 5 6 PC197 PA121 PC202 PC199 PC198 1X507 1X1463 1X25 1 1 1 1 1 4 4 4 7 8 PA134 1X482 1 1 9 10 11 12 PB142 PA136 PC201 1X3302 1 1 1 2 1X3808 2 28P712 1 DESCRIPTION FSCM No. Boom Angle Indicator Assy. Bearing Pointer Rod Mounting Plate Indicator Plate Machine Screw, Brass, Slotted Round Head, #10 X 1/2" Hexagon Machine Screw Nut, Brass, #10 Spring Lockwasher, Medium Series, Carbon Steel, Natural, #10 Sheet Hex Socket Set Screw, Cup Point, NC-3 Threads, Heat Treated Alloy Steel, 1/4" X 5/8" Pin Washer Pendulum Bar Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" X 1-1/2" 1X6 2Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" The Following Items Are Not Shown: Mounting Bracket 36422 36422 36422 36422 36422 90483 90483 20859 36422 90483 36422 36422 36422 90483 86157 72968 36422 M18-1-2.0(1 of 2) TM 10-3950-263-14&P-3 Parts List Crane Boom Angle Indicator- Continued REF. PART NO. QTY. DESCRIPTION SE50 1X3809 2 4 1X4 4 FSCM No. U-Bolt Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" M18-1-2.0 (2 of 2) 36422 72968 86157 TM 10-3950-263-14&P-3 Parts List M18-4-6.0 Hook Block - 45 Ton REF. 1 2 3 4 5 6 7 8 9 10 11 PART NO. QTY. 22M1692 3M402 3M401 3M405 3M400 3M397 3M404 3M387 3M389 3M395 3M386 3M406 3M403 1 3 4 3 1 1 4 1 1 1 1 6 1 DESCRIPTION FSCM No. Hook Block Sheave Grease Jerk Bearing Cotter Pin Shield-Sheave Pin Bronze Spacer Hook Bearing Latch Kit Hook Steel Spacer Bearing Retainer Sheave Pin * See Vendor Annex List For FSCFM NO. M18-4-6.0 (1 Of 1 ) 36422 * * * * * * * * * * TM 10-3950-263-14&P-3 M18-4-7.0 Parts List Hook Block - 150 Ton M18-4-7.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Hook Block - 150 Ton - Continued REF. PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 28M774 3M393 3M382 3M391 3M401 3M384 3M394 3M388 3M396 3M399 3M400 3M398 1 2 6 6 7 6 2 1 1 1 1 1 FSCM No. Hook Block Cone Follower, Inner Bearing/Roller Assembly Sheave Grease Zerk Up Seal/Bearing Cone Follower/Outer Bearing/Hook Hook Latch Kit Cotter Pin Pin/Sheave Assembly * See Vendor Annex List For FSCM NO. M18-4-7.0 (2 of 2) 36422 * * * * * * * * * * TM 10-3950-263-14&P-3 Parts List Decals And Labels R1083 M18-9-56.0 (1 Of 4) M18-9-56.0 TM 10-3950-263-14&P-3 Parts List Decals And Labels - Continued REF. PART NO. QTY. 1 22A2657 1X3816 1 4 2 3 4 8A6111 12A1362 18A3983 36A1490 18A1513 18A3736 22P1356 22P1357 22J1761 36P36 1P2036 22P1641 12P155 12P95 1P2240 1P1248 31H290 9P1178 8A5629 12A3476 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 2 4 4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 R1083 DESCRIPTION FSCM No. Axle Rating Plate Rivet, Blind, Closed End Aluminum, Domed Type Head, 3/16" X 1/2" Label - Tire Inflation Label - Boom Guide Red Decal - FMC Link-Belt White Decal - FMC Link-Belt Label - Hyd.Pump Engage (Bottom Rt. Of Cab Dash) Label - Main Transmission (Sun Visor In Cab) Black Decal White Decal Counterweight Instruction Label Red Decal (FMC) White Decal (FMC) Lubrication Chart Safety Cable Plate Label - Hand Signals Power Line Danger Label PCSA Std. Label Diesel Fuel Information Label - Danger Swinging Upper Information Label (Top Of Outrigger Box) Label - Tire Inflation M18-9-56.0 (2 OF 4) 36422 90483 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 36422 TM 10-3950-263-14&P-3 Parts List Decals And Labels - Continued R1083 M18-9-56.0 (3 OF 4) M18-9-56.0 TM 10-3950-263-14&P-3 Parts List Labels And Decals - Continued REF. PART NO. QTY. 19 20 22P1524 4P5 1X3816 1 1 4 21 18P697 1X3816 1 4 22 1P2099 1X3816 1 4 23 24 25 26 22P1667 18M3757 9P1242 18P969 1 1 2 2 R1083 DESCRIPTION FSCM No. Caution Label (Boom Foot Pin Removal Only) Engine Speed Plate Rivet, Blind, Closed End, Aluminum, Domed Type Head, 3/16" X 1/2" Ownership Plate Rivet, Blind, Closed End, Aluminum, Domed Type Head, 3/16" X 1/2" Patent Plate Rivet, Blind, Closed End, Aluminum, Domed Type Head, 3/16" X 1/2" Live Mast Capacity Label Live Mast Backstop Label Information Label Caution Label - Backstops M18-9-56.0 (4 OF 4) 36422 36422 90483 36422 90483 36422 90483 36422 36422 36422 36422 TM 10-3950-263-14&P-3 M18-10-27.0 Parts List Light Plant Assembly REF. PART NO. QTY. 1 2 RB150 1X5821 1 1 3 4 1X845 1X3357 1X4 NC1186 1X3809 1 4 8 4 4 5 6 1R2 1X4020 1 2 7 1X3718 1X3808 2 2 8 12A529 8H824 1X829 1A4685 RA157 1X5424 JC2987 1 1 1 2 4 4 1 9 DESCRIPTION Fitting, Cap Pipe Pipe Nipple, Extra Heavy, Wrought Steel, NPT Threads, 1-1/2" X 8" Pipe Coupling, Carbon Steel, 1-1/2" Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 1-1/2" Plain Washer, Hot Rolled Mild Steel, Zinc Plated, 3/8" Rubber Washer Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" Fuel Tank Locking Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" 2-1/2" Capscrew, Hex Head, UNC Class 2A-Grade 5, 1/2" X 1-3/4" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/2" Battery, 12 Volt Battery Case Pipe Plug, Square Head, Steel, 1/2" Tube Elbow Cap, 37¼ Flare, Steel, Cadium Plated, 1/4" Bracket 36422 M18-10-27.0(1 of 2) NA315-B FSCM No. 36422 09505 09505 90483 86157 36422 72968 36422 72968 90483 72968 36422 36422 09505 36422 36422 09505 TM 10-3950-263-14&P-3 Parts List Light Plant Assembly - Continued REF. PART NO. QTY. JC2275 AC5493 1X5079 2 1 1 10 1X3843 1X3809 1 4 11 1X927 1X1953 1 1 1X942 1R385 1 1 12 13 DESCRIPTION FSCM No. Clamp Capscrew Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 1/4" Capscrew, Hex Head, UNC Class 2A-Grade 5, 3/8" X 4-1/2" Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 90° Street Elbow, Malleable Iron, 1/2" Pipe Nipple, Standard Weight, Wrought Steel, NPT Threads, 1/2" X 4-1/2" Pipe Cap, Malleable Iron, 1/2" Generator Light Plant Exhaust Assembly, See M18-10-28.0 M18-10-27.0(2 of 2) 36422 36422 72968 90483 72968 09505 09505 09505 36422 TM 10-3950-263-14&P-3 M18-10-27.1 Parts List Cylinder Head Valve And Rocker M18-10-27.1(1 of 2) TM 10-3950-263-14&P-3 Parts List Cylinder Head Valve & Rocker - Continued REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 862-0003 115-0188 115-0160 115-0150 115-0127 115-0152 516-0090 520-0608 110-0859 110-0858 110-1220 110-1221 509-0090 110-1501 110-0814 526-0174 110-1695 110-1268 110-1320 110-1278 110-1267 115-0195 115-0155 115-01 46 115-0151 115-0149 509-0084 333-0106 110-0546 110-1444 110-1356 110-1512 815-0252 870-0134 518-0207 110-1511 115-0147 110-1264 115-0128 115-0129 809-0042 526-0130 120-0595 850-0045 110-0879 403-0671 309-0195 508-0126 309-0196 508-0217 1 1 1 2 2 2 1 2 2 4 2 2 1 2 4 4 1 2 1 1 1 2 2 2 2 2 4 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 2 1 1 2 1 1 40 41 42 43 44 45 46 47 48 49 DESCRIPTION Nut, 3/8" -16 Cover, Rocker Gasket, Rocker Cover Lock Nut, Rocker Arm Ball, Rocker Arm Stud, Rocker Arm Pin, Roll 3/8" X 1-3/8" Stud, Exhaust Manifold Mounting Cap, Valve Stem Lock, Valve Spring Retainer Retainer, Valve Spring Spring, Valve Seal, Intake Valve Oil Guide, Valve Screw, 3/8" -16 X 1-1/2" Cylinder Head Washer, Cylinder Head Head, Cylinder Insert, Valve Seat Valve, Intake Valve, Stellite Exhaust Gasket, Head Tappet, Valve Washer, Spring Retaining Spring, Shield Retainer Shield, Push Rod Rod, Valve Push (Steel) Seal, Push Rod Shield Plug, Glow Gasket, Glow Plug Pin, Decompression Release Spring, Decompression Release Arm, Decompression Release Set Screw, Decompression Release Palnut, Decompression Release Ring, Decompression Release Retainer Washer, Decompression Release Guide, Push Rod Screw, 3/8" -16 X 4-1/4" Cylinder Head Arm, Exhaust Rocker Arm, Intake Rocker Screw, Rocker Cover Oil Line Washer Line, Rocker Cover Oil Lockwasher, Rocker Cover Mounting 5/16" Capscrew, Hex. Rocker Cover Mounting 5/16" -18 X 1-1/4" Bolt, Lifting Bracket, High Air Temperature Switch Mounting Washer, High Air Temperature Switch Mounting Insulator Switch, High Air Temperature - See Note Insulator, High Air Temperature Switch Sleeving Note: Mounts On Manifold Stud M18-10-27.1(2 of 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 M18-10-27.2 Parts List Crankcase And Oil Base M18-10-27.2(1 of 2) TM 10-3950-263-14&P-3 Parts List REF. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 110-1335 101-0363 101-0359 516-0141 120-0572 101-0386 104-0420 101-0337 805-0019 516-0072 517-0053 101-0365 123-0952 123-0667 123-0191 123-0716 123-1084 850-0045 800-0026 1 1 2 1 1 1 2 1 6 2 1 1 1 1 1 1 1 2 2 20 21 22 23 24 25 26 27 28 862-0004* 850-0055 526-0014* 402-0328* 402-0282* 402-0300* 402-0284 402-0285 526-0195* 816-0212* 4 4 4 4 4 4 2 2 4 4 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 505-0056 505-0014 505-0002 800-0050 850-0050 102-0541 102-0459 509-0086 526-0245 123-0998 123-0865 509-0117 123-1203 518-0268 809-0035 102-0558 * 402-0301 DESCRIPTION FSCM No. 1 1 1 6 6 1 1 1 6 2 1 1 1 1 1 1 Block Assembly, Cylinder Bearing, Precision Cam Front Bearing, Precision Pin, Gear Cover Locating Dowel Tube, Crankcase Oil Gasket Kit, Bearing Plate (w/Steel Shims) Washer, Crankshaft Thrust Plate, Bearing Bolt, 3/8" -16 X 1-1/4" Plant Place Pin, Thrust Washer Plug, Camshaft Opening Bearing, Precision Cam Rear Tube, Breather Gasket, Oil Fill Tube Gasket, Cap Cap And Indicator Tube, Oil Fill Lockwasher, 5/16" Oil Fill Tube Mounting Capscrew, 5/16" -18 X 3/4" Hex. Head Oil Fill Tube Mounting Nut, 7/16" -14 Hex. Generator Set Mounting Lockwasher, 7/16" Generator Set Mounting Washer, 29/64" I.D. X 1-1/2" O.D. X 1/8" Bushing, Vibration Mount Spacer Snubber, Shock Mounting Cup, Cushion Retaining Cushion, Vibration (Engine End) Cushion, Vibration (Generator End) Washer, 29/64" I.D. X 3-1/4" O.D. X 1/8" Bolt, Generator Set Mounting 7/16" -14 X 5-1/2" Carriage Plug, 1/2" Coupling, 1/2" Nipple, 1/2" X 3" Capscrew, 3/8" -16 X 1" Hex. Head Oil Base Mounting Lockwasher, 3/8" Oil Base Mounting Base, Oil Gasket, Base Seal, Crankshaft Rear Washer, Bearing Plate Mounting Flat Insulator Halves, Breather Tube Baffle, Breather Seal, Breather Tube "O" Ring Cap And Valve Assembly, Breather Clamp, Breather Tube Insulator Halves Screw, Breather Clamp Heater, Oil Base (Optional) 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 4 Hardware Set, Generator Set Mounting 44940 M18-10-27.2(2 of 2) 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Piston And Connecting Rod REF. 1 2 3 4 5 6 7 8 PART NO. 113-0130 114-0168 114-0170 114-0164 805-0012 112-0109 112-0093 112-0085 M18-10-27.3 QTY. DESCRIPTION 1 Ring Set Piston 1 Rod Assembly, Connecting 2 Bushing, Connecting Rod Piston Pin 2 Bearing Half, Connecting Rod 2 Bolt, 5/16" -24 X 1-13/16" 1 Piston And Pin 1 Pin, Piston 2 Ring, Pin Retaining M18-10-27.3(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Crankshaft And Flywheel REF. 1 2 3 4 5 6 7 8 9 PART NO. 104-0462 515-0001 515-0153 104-0418 104-0416 518-0188 526-0185 800-0500 104-0529 M18-10-27.4 QTY. DESCRIPTION 1 Crankshaft 1 Key, Gear 1 Key, Flywheel To Crankshaft 1 Gear 1 Washer, Retainer 1 Ring, Lock 1 Washer, 7/16" Flywheel 1 Screw, 7/16" -14 X 5-1/2" Flywheel 1 Flywheel M18-10-27.4(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Camshaft REF. 1 2 3 4 5 6 7 8 PART NO. 105-0299 150-0075 515-0001 105-0205 105-0218 510-0046 150-0776 150-0078 M18-10-27.5 QTY. DESCRIPTION 1 Camshaft 1 Pin, Center 1 Key, Camshaft Gear 1 Washer, Thrust 1 Gear 10 Ball, Governor Fly 1 Cup, Governor 1 Ring, Center Pin Snap M18-10-27.5(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Gear Cover REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 103-0277 510-0048 509-0088 518-0129 815-0176 850-0025 150-0838 150-0777 509-0087 516-0111 510-0043 510-0082 150-1089 800-0028 110-0879 850-0045 103-0251 800-0026 18 19 20 850-0045 103-0218 103-0226 M18-10-27.6 QTY. DESCRIPTION 1 Cover Assembly, Gear 1 Bearing, Governor Shaft 1/2" 1 Seal, Oil 1 Ring, Yoke 1 Screw, #8 -32 X 1/2" 1 Lockwasher, #8 1 Shaft, Governor 1 Yoke, Governor 1 Seal, Oil 1 Pin, Governor Cup Stop Roll 1 Ball, Governor Shaft Thrust Bearing 1 Bearing, Governor Shaft 1/4" 1 Arm, Governor 1 Capscrew, 5/16" -18 X 1" Gear Cover Mounting 4 Capscrew, 5/16" -18 X 1-1/4" Gear Cover Mounting 5 Lockwasher, 5/16" Gear Cover Mounting 1 Gasket, Gear Cover 1 Capscrew, 5/16" -18 X 3/4" Hex. Gear Cover Backplate Mounting 1 Lockwasher, 5/16" Gear Cover Backplate Mounting 1 Gasket, Backplate 1 Backplate M18-10-27.6(1 of 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List REF. PART NO. QTY. 21 22 23 24 103-0221 160-0721 526-0115 815-0347 1 1 2 2 DESCRIPTION FSCM No. Cover, Gear Cover Backplate Gasket, Backplate Opening Cover Washer, Gear Cover Backplate Mounting, Flat Screw, 1/4" -20 X 1/2" Hex. Head Gear Cover Backplate Mounting M18-10-27.6(2 of 2) 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Oil System REF. 1 2 3 4 5 6 7 8 PART NO. 501-0003 122-0182 122-0188 120-0622 502-0281 502-0037 850-1045 800-0026 9 10 11 12 13 14 15 16 17 18 19 20 21 122-0185 309-0104 502-0053 502-0255 120-0598 800-0030 850-0045 120-0547 120-0551 120-0580 120-0539 120-0555 505-0274 M18-10-27.7 QTY. DESCRIPTION 1 Line, Oil Gauge 1 Adapter, Oil Filter 1 Gasket, Adapter 1 Line, Adapter To Cylinder Head 1 Connector, Restricted Cylinder Head 1 Elbow, Oil Line To Filter Adapter 3 Lockwasher, Oil Filter Adapter Mounting 5/16" 3 Capscrew, Oil Filter Adapter Mounting 5/16" -18 X 3/4" Hex. Head 1 Filter 1 Switch, Low Oil Pressure Cut-off 1 Elbow, Oil Gauge Street 450 1 Tee, Air Trap Tube Restricted 1 Tube, Switch Air Trap 2 Capscrew, Oil Pump Mounting 5/16" -18 X 1" Hex. Head 2 Lockwasher, Oil Pump Mounting 5/16" 1 Pump Assembly, Oil 1 Cup, Oil Intake 1 Gasket Kit, Pump 1 Valve, Oil By-Pass 1 Spring, By-Pass Valve 1 Plug, Oil By-Pass 1/8" M18-10-27.7(1 of 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Oil System - Continued REF. PART NO. QTY. DESCRIPTION 22 193-0006 1 Gauge, Oil Pressure 23 502-0020 1 Elbow, Low Oil Pressure Switch Street 900 24 505-0057 1 Plug, 1/8" Adapter 25 502-0001 1 Tee, Oil Gauge Mounting M18-10-27.7 (2 OF 2) FSCM No. 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Governor REF. 1 2 3 4 5 6 7 8 9 10 PART NO. 150-1201 870-0053 150-0939 870-0131 150-1107 150-1084 150-1082 862-0003 870-0133 M18-10-27.8 QTY. DESCRIPTION 1 Link 2 Nut, Governor Link Lock 2 Joint, Ball Yoke, Governor - See M18-10-27.6 2 Nut, Joint Arm Keps 1 Bracket Assembly 1 Spring, Governor 1 Stud, Adjusting 1 Nut, Adjusting Stud 1 Nut, Lock M18-10-27.8(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Anti-Flicker And Stop Solenoid REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 307-1098 307-0736 306-0166 306-0167 509-0018 160-0796 509-0091 160-0799 160-0263 160-0800 166-0316 337-0051 304-0003 M18-10-27.9 QTY. DESCRIPTION 1 Solenoid, Decompression Release 12 Volt 1 Gasket, Solenoid Mounting 1 Spring, Solenoid Plunger 1 Plunger, Solenoid (w/Pin) 1 Seal, Stop Solenoid, "O" Ring 1 Cover, Anti-Flicker 1 Seal, "O" Ring 1 Guide, Breaker Plunger 1 Diaphragm, Breaker Plunger Condenser, Anti-Flicker (1.0 Mfd.) - See M18-10-27. 15 1 Plunger, Breaker 1 Point Set, Anti-Flicker 1 Strap, Ground Solenoid To Engine 1 Resistor, Decompression Release Solenoid M18-10-27.9 (1 Of 1 ) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Fuel Transfer Pump And Injection System REF. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. 147-0141 800-0508 526-0122 502-0065 149-0947 147-0136 147-0134 147-0043 147-0044 110-0419 147-0133 800-0031 13 14 15 16 17 18 19 20 21 850-0045 147-0180 509-0101 147-0172 115-0166 149-0852 149-1307 800-0027 149-0116 QTY. DESCRIPTION 1 Flange, Injector Nozzle Hold-Down 2 Capscrew, Nozzle Mounting 5/16" -18 X 2-3/4" Hex Head 2 Washer, Nozzle Mounting Flat 1 Elbow, Nozzle 450 Inverted 1 Line, Nozzle Fuel Return 1 Nozzle And Holder Assembly 1 Nozzle Only 1 Gasket, Heat Shield (Asbestos) 1 Shield, Nozzle Heat (Steel) 1 Gasket, Shield To Head (Copper) 1 Adapter, Injector Nozzle 2 Capscrew, Injector Pump Mounting 5/16" -18 X 1-1/2" Hex Head 2 Lockwasher, Injector Pump Mounting, 5/16" 1 Pump, Injection 1 Seal, Injection Pump To Crankcase "O" Ring 1 Shim Kit, Injection Pump 1 Tappet, Injection Pump 1 Pump, Fuel Transfer 2 Washer, Fuel Pump Mounting 2 Capscrew, Fuel Pump Mounting 5/16" -18 X 7/8" Hex Head 1 Bowl, Fuel Transfer Pump M18-10-27.10(1 of 2) M18-10-27.10 FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Fuel Transfer Pump And Injection System - Continued REF. PART NO. QTY. DESCRIPTION 22 502-0002 1 Elbow, Fuel Pump Inlet Inverted Male 23 149-0517 1 Gasket, Fuel Pump Bowl 24 149-0463 1 Filter Assembly, Fuel Transfer 25 502-0065 1 Elbow, 450 Inverted 26 149-0792 1 Gasket, Fuel Pump Mounting 27 502-0033 1 Connector, Injection Pump Inlet Inverted 28 147-0183 1 Valve, Injection Pump Check 29 149-0925 1 Line, Injection Pump To Nozzle M18-10-27.10(2 of 2) FSCM No. 44940 44940 44940 44940’ 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Fuel Filters REF. 1 2 3 4 5 6 7 8 9 PART NO. 501-0103 502-0003 149-1185 122-0326 502-0080 122-0325 149-1191 526-0068 801-0074 526-0066 801-0053 M18-10-27.11 QTY. DESCRIPTION 1 Line, Secondary Filter To Injector Pump Fuel 2 Connector, Fuel Filter 1 Adapter, Fuel Filter 1 Filter, Secondary Fuel 2 Plug, Fuel Filter Drain 1 Filter, Primary Fuel 1 Line, Transfer Pump To Primary Filter 1 Washer, Primary Fuel Filter Mounting 1 Capscrew, Primary Fuel Filter Mounting Hex. Head 1 Washer, Secondary Fuel Filter Mounting 1 Capscrew, Secondary Fuel Filter Mounting Hex. Head M18-10-27.11 (1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Air Cleaner REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 865-0020 520-0621 140-0594 140-0636 140-0595 141-0281 520-0011 870-0137 336-1418 336-1380 154-0712 503-0560 503-0171 505-0180 140-0576 140-0584 M18-10-27.12 QTY. DESCRIPTION 2 Nut, Air Cleaner Hold-Down Wing 2 Stud, Air Cleaner Hold-Down 1 Cover, Air Cleaner 1 Element And Retainer, Air Cleaner 1 Pan, Air Cleaner 1 Gasket, Air Cleaner Adapter To Engine 2 Stud’, Air Cleaner Adapter Mounting 2 Nut, Air Cleaner Adapter Mounting Lug Lock 1 Lead, Air Heater To Solenoid In Control 1 Lead, Glow Plug To Air Heater 1 Heater, Air Intake 12 Volt (w/Gasket) 1 Hose, Breather 2 Clamp, Breather Hose 1 Plug, Air Cleaner Adapter 1/4" Pipe 1 Adapter, Air Cleaner 1 Gasket, Air Cleaner M18-10-27.12(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Air Housing REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 134-1130 134-1131 134-1127 134-1048 134-1050 134-1092 134-1178 134-1085 508-0002 508-0021 134-1102 134-1117 134-1554 870-0194 134-1180 134-1373 M18-10-27.13 QTY. DESCRIPTION 1 Cover, Nozzle And Housing 1 Cover, Plain Housing 1 Housing, Rear Cylinder Air 1 Housing, Front Cylinder Air 1 Housing, Blower 3 Retainer, Grille 1 Grille And Plate 1 Support, Blower Housing And Grille 1 Grommet, Rubber (For 9/16" Hole) 3 Grommet, Rubber (For 3/4" Hole) 1 Panel, Bottom Cylinder Air Housing 1 Panel, Air Housing Door 1 Bracket, Air Housing Door Panel 5 U-Clip, Door Panel And Cover 1 Washer, Door 1 Screw, Door M18-10-27.13(1 of 1) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Generator REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO. 510-0047 205-0065 231-0113 515-0006 232-1256 520-0502 520-0525 526-0032 862-0004 800-0032 210-0348 222-1593 221-0091 212-0303 211-0098 850-0045 860-0015 234-0005 211-0099 212-1105 312-0058 M18-10-27.14 QTY. DESCRIPTION 1 Armature Assembly 1 Bearing, Armature Ball 1 Blower, Generator 1 Adapter 1 Key, Blower 1 Scroll, Generator Air 2 Stud, Generator Through 1 Stud, Aramature Through 1 Washer, Armature Through Stud 7/16" Flat 1 Nut, Armature Through Stud 7/16" -14 Hex. 8 Screw, Pole Shoe Mounting 5/16" -18 X 1-3/4" 1 Frame Only 1 Coil Assembly, Field (Set of 4 Coils) 4 Shoe, Field Pole 1 Rig Assembly, Brush 1 Bell, End 2 Lockwasher, Generator Through Stud 5/16"! 2 Nut, Generator Through Stud 5/16" -18 Hex 1 Band, End Bell 1 Cover, End Bell 8 Spring, Brush 3 Condenser M18-10-27.14(1 of 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44840 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Generator - Continued REF. 23 24 25 26 27 28 PART NO. 214-0061 214-0056 204-0092 203-0127 850-0050 800-0050 800-0051 29 30 516-0103 850-0055 QTY. DESCRIPTION 4 Brush, Commutator (DC) 4 Brush, Collector Ring (AC) 1 Collector Ring 1 Commutator 4 Lockwasher, Generator Adapter Mounting 3/8" 2 Capscrew, Generator Adapter Mounting 3/8" -16 X 1" Hex Head 2 Capscrew, Generator Adapter Mounting 3/8" -16 X 1-1/4" Hex Head 2 Pin, Roll 1 Washer, Armature Through Stud 7/16" M18-10-27.14 (2 OF 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Control Box Assembly REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO. 332-0604 302-0446 332-0616 308-0154 301-2009 301-2426 301-2424 301-2425 301-2008 301-1963 307-1046 304-0032 304-0006 308-0037 307-0004 302-2012 332-0609 402-0078 337-0036 312-0057 307-0180 332-0602 M18-10-27.15 QTY. DESCRIPTION 1 Block, 5 Place Remote Control Terminal 1 Ammeter, Charge 1 Strip, Block Marker 1 Switch, Start Stop 1 Panel, Control Box 1 Bracket, Control Box Mounting (Left) 1 Bracket Control Box Mounting 1 Bracket, Control Box Mounting (Right) 1 Box, Control 1 Cover Control 2 Solenoid, Manifold Heater And Start 1 Resistor, (15-ohm, 10 Watt) Fixed 2 Washer, Resistor Centering 1 Switch, Manifold Heater 1 Relay, Decompression Solenoid 1 Cover, Resistor 1 Block, Terminal Load 4 Mount, Control Box Rubber 1 Strap, 36" Bond 1 Condenser, Anti-Flicker (1.0 Mfd.) 1 Relay, Reverse Current 1 Jumper, Solenoid M18-10-27.15(1 of 2) FSCM No. 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 44940 TM 10-3950-263-14&P-3 Parts List Control Box Assembly - Continued REF. 23 PART NO. 332-0592 QTY. DESCRIPTION 1 Jumper, Ground M18-10-27.15(2 of 2) FSCM No. 44940 TM 10-3950-263-14&P-3 Parts List Light Plant Exhaust Assembly M18-10-28.0 M18-10-28.0 (1 Of 2) TM 10-3950-263-14&P-3 Parts List Light Plant Exhaust Assembly - Continued REF. PART NO. QTY. DESCRIPTION 1 154-0463 1 Gasket 2 526-0045 2 Washer 3 110-0445 2 Nut 4 154-0725 1 Manifold, Exhaust 5 RA145 1 Elbow 6 1X1410 1 Pipe Nipple, Extra Heavy, Wrought Steel, NPT Threads, 1-1/4" X 1-5/8" 7 1X922 2 Elbow, 45°, Malleable Iron, Black, NPT Threads, 1-1/4" 8 47R10 1 Muffler Clamp Assembly 9 lX5820 1 Pipe Nipple, Extra Heavy, Wrought Steel, NPT Threads, 1-1/4" X 15-1/8" 10 155-0330 1 Muffler, 1-1/4" Inlet 11 505-0031 1 Coupling, 1-1/4" 12 22R16 1 Tail Pipe Hanger 13 1X3809 2 Locknut, Hexagon, Low Carbon Steel, Zinc Plated, Rockwell C32, Nylon Insert, UNC-3B, 3/8" 14 1X2574 2 Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" X 1" 15 22R17 1 Bracket 16 1X5819 1 Pipe Nipple, Standard Weight, Wrought Steel, Black, NPT Thread, 1-1/4" X 7" 17 1X4226 2 Locking Capscrew, Hex Head, UNC Class 2A - Grade 5, 3/8" 72968 X 2" 18 1X4 AR Plain Washer, Hot Rolled, Mild Steel, Zinc Plated, 3/8" 19 19M899 2 Spacer 20 22R18 1 Bracket M18-10-28.0 (2 Of 2) FSCM No. 44940 44940 44940 44940 36422 09505 09505 36422 09505 44940 44940 36422 72968 90483 36422 09505 86157 36422 36422 TM 10-3950-263-14&P-3 Parts List Overload Warning - Two Blocks R1083 M18-13-81.0 (1 of 2) M18-13-81.0 TM 10-3950-263-14&P-3 Parts List Overload Warning - Two Blocks - Continued REF. 1 2 3 4 5 6 7 8 9 PART NO. 22M1793 3M503 3M502 3M499 3M508 3M501 3M578 3M579 3M580 3M581 R1083 QTY. DESCRIPTION 1 Overload Warning Assembly 2 Load Pin Assembly 1 Dual Head Amplifier Assembly 1 Main Electronics Assembly 1 Display Assembly 1 Angle Sensor Assembly0 2 Cable Assembly 1 Cable Assembly 2 Cable Assembly 1 Cable Assembly * See Vendor Annex List For FSCFM Number M18-13-81.0 (2 of 2) FSCM No. 36422 * * * * * * * * * TM 10-3950-263-14&P-3 By Order of the Secretary of the Army: Official: DONALD J. DELANDRO Brigadier General, United States Army The Adjutant General Distribution: To be distributed in accordance with SPECIAL DISTRIBUTION. U S. GOVERNMENT PRINTING OFFICE . 1990 0 - 261-872 (20578) JOHN A.. WICKHAM, JR. General, United States Army Chief of Staff PIN: 057438-000 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF=http://www.liberatedmanuals.com/>Free Military and Government Manuals</A> – Sincerely Igor Chudov http://igor.chudov.com/