Download Order No. PHAT100601CE Service Manual

Order No. PHAT100601CE
(Revision : Oct. 2011)
Service Manual
Fully Automatic Washing Machine
NA-F78B2
NA-F80B2
NA-F80H2
NA-F90B2
NA-F90H2
NA-F1002B
Product Colour
Silver (A)
White (D)
Grey (J)
Destination
Thailand, Indonesia, Vietnam, Malaysia, India
Singapore (Local), Singapore (Export)
Philippines, UAE (Local), Kuwait
Qatar, Oman, Bahrain, Lebanon
UAE (PGF), Libya
WARNING
The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do
not modify the original design without permission of manufacturer.
© Panasonic Home Appliances (Thailand) Co., Ltd. 2010.
All rights reserved. Unauthorized copying and distribution
is a violation of law.
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
CONTENT
Page
1. Attention in the Repair Work Security
2. Specifications
3. Features and Technical Information
3.1 Function Control with Fuzzy sensor
3.2 Power input and current
4. Installation
4.1 Checking of placement
4.2 Connect the water supply hose
4.3 Install Washing Machine to steady
4.4 Child Lock program
5. Operations Panel
5.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
5.2 NA-F80H2 / NA-F90H2
6. Wiring Diagram
6.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
6.2 NA-F80H2 / NA-F90H2
7. Table of Errors
8. Troubleshooting
8.1 Table of Troubleshooting
8.2 The following symptoms are not trouble
9. Disassembly Instruction
9.1 Remove screws of back panel out
9.2 Remove back panel out
10. Parts Exploded View and Replacement Parts List
10.1 Parts Exploded View : Part A
10.2.1 Replacement Parts List : Part A of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
10.2.2 Replacement Parts List : Part A of NA-F80H2 / NA-F90H2
10.3 Parts Exploded View : Part B
10.4.1 Replacement Parts List : Part B of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
10.4.2 Replacement Parts List : Part B of NA-F80H2 / NA-F90H2
10.5 Parts Exploded View : Part C
10.6.1 Replacement Parts List : Part C of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
10.6.2 Replacement Parts List : Part C of NA-F80H2 / NA-F90H2
10.7 Parts Exploded View : Packing Part
10.8.1 Replacement Parts List : Packing of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
10.8.2 Replacement Parts List : Packing of NA-F80H2 / NA-F90H2
Detail Change Notice
-2-
3
4
5
6
7
8
9
9
9
10
11
12
12
13
14
15 - 16
17
17
18
19
20
21
22
23
24
25
26
27
28
29
30
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
1. ATTENTION IN THE REPAIR WORK SECURITY
In order to prevent any accident during repair work and ensure security of the product after repair work,
somethings surely followed are explained below.
■ The level of the arised damages or dangers, when indicated contents are ignored, are classified by
following indications and explained.
WARNING
The content in the column of this indication is
“ Be assumed that possibly die or get seriously injured ”.
content in the column of this indication is
ATTENTION The
“ Be assumed that possibly get damages or possibly only damage object occured ”.
■ Types of the contents being followed are classified by following figured symbols and explained.
(The following is an example of expression in pictures)
This figured symbol means caution “ ATTENTION ”
This figured symbol means must not do “ PROHIBITION ”
This figured symbol means surely execute “ INSTRUCTIONS ”
WARNING
Connectionof cables should be done according to regular work.
• Connection of cables should be tightened reliably with strength using solderless terminal.
(specified parts always using regular bonding plier)
• Install a fire protection cover (fireproof) covering connectin area completely, and close opening
areas by tape. (Please reuse the fire protection cover which came with the products).
• When drawing cables around, fixing those cables with cable suppression part. Do not touch
rotating part, high temperature part and surface of metal.
• Be sure to replace with cable unit when any cable was snapped. When a part of the cable unit
was cut, you must not do the connection repair. It may be the cause of smoke, ignition or
receiving an electric shock.
Be careful about receiving an electric shock.
When doing electric connection service
such as voltage measurement, please be
careful enough about receiving an electric
shock at electric charging parts and cable
terminal parts.
Pull out electric plug when doing repair work.
Disassembling, assembling and replacing
parts should be done after pulling out
electric plug. Receiving an electric shock
or getting an injury may occur.
Be sure to use specified parts.
Always use specified parts for the parts
with mark
in the electric circuit
diagrams and parts list. It may be the
cause of smoke, ignition or damage.
Do not touch any rotating object with hand
unless it stops completely.
Slow rotation may also roll in your hands
and cause injury.
Rebuilding is prohibited.
Do not rebuild machine parts and
components when repairing service.
It may be the cause of damage or ignition.
Straightly pull out or insert in huasuton terminal.
Do not twist it. It may be the cause of
damage or ignition.
ATTENTION
Please wear gloves when disassembling, replacing and assembling.
Always wear gloves to prevent an injury by the metal end face or an electric shock at the time of
the electricity service
Please be careful to the edges of the metal end face.
Wear the working clothes of long sleeves to prevent an injury by the metal end face or please
work after covering the end face with tape or towel.
-3-
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
2. SPECIFICATIONS
Model
Rate voltage
NA-F78B2
NA-F80B2
Vietnam
Thailand, Vietnam,
220V/50Hz
and Frequency
NA-F80H2 NA-F1002B
Vietnam
Indonesia
NA-F90B2
NA-F90H2
Thailand, Vietnam,
Thailand, Vietnam,
Sin-RBD
Sin-RBD, UAE-PGF,
Sin-RBD, UAE-PGF,
Libya
Libya
230V/50Hz
Sin-DBD, India
230V/60Hz
Philippines
240V/50Hz
Malaysia, UAE (AFP),
Colour
Sin-DBD
Sin-DBD
India
Philippines
Malaysia, UAE (AFP),
Malaysia
Kuwait, Oman, Qatar,
Kuwait, Qatar, Oman,
Bahrain, Lebanon
Bahrain, Lebanon
Grey
Silver
Grey
Grey
Silver
Grey
Rate Power
220V/50Hz
470W/260W
450W/230W
Consumption
230V/50Hz
490W/300W
470W/260W
(Wash / Spin)
230V/60Hz
510W/330W
510W/330W
240V/50Hz
490W/300W
470W/260W
Power
220V/50Hz
150 Wh
140 Wh
Consumption
230V/50Hz
170 Wh
150 Wh
(NA-F80 / F90)
230V/60Hz
170 Wh
160 Wh
240V/50Hz
170 Wh
150 Wh
150 Liter
154 Liter
Wash
8.0 Kg
9.0 Kg
Spin
8.0 Kg
Standard Water Consumption
Standard Capacity
9.0 Kg
Pulsator with rated load (r.p.m.)
110 r / min
Spin Tub with rated load (r.p.m.)
Outer Dimension
Product Weight
740 r / min
Body
554 mm. x 598 mm. x 998 mm.
Installation
597 mm. x 619.5 mm. x 1031 mm.
Accessories
41 Kg
45 Kg
Packing
Water Supply Pressure
0.03 to 1 MPa (0.3 to 10 Kgf / cm2) / 8 ~ 25 liter / min.
Motor
Thermal Protector
Motor Power
Input : 320 Watts / Output : 180 Watts
Safety Switch
Checking Unbalance / Tub Lid
Alarm
Rings when finishing washing or unusual
Fabric Softener Dispenser
Have
Filter
Have
Automatic Power - Cut Switch
Have
Bleach Dispenser
Have
Standard Water Consumption
Standard Water Consumption
Model : NA-F78B2 / NA-F80B2 / NA-F80H2 / NA-F1002B
Model : NA-F90B2 / NA-F90H2
Wash Level
Water Only
High
<High Lower>
Medium
<Medium Lower>
Low 1
<Lower 1 Lower>
Low 2
<Lower 2 Lower>
Low 3
<Lower 3 Lower>
77 Liters
72 Liters
65 Liters
61 Liters
55 Liters
51 Liters
45 Liters
41 Liters
35 Liters
18 Liters
Clothes Weight
8.0 Kgs
6.0 Kgs
5.0 Kgs
4.2 Kgs
3.5 Kgs
2.5 Kgs
1.5 Kgs
1.1 Kgs
0.8 Kgs
0.3 Kgs
69 Liters
65 Liters
60 Liters
56 Liters
52 Liters
48 Liters
43 Liters
38 Liters
33 Liters
18 Liters
-4-
Wash Level
Water Only
High
<High Lower>
Medium
<Medium Lower>
Low 1
<Lower 1 Lower>
Low 2
<Lower 2 Lower>
Low 3
<Lower 3 Lower>
77 Liters
72 Liters
65 Liters
61 Liters
55 Liters
51 Liters
45 Liters
41 Liters
35 Liters
18 Liters
Clothes Weight
9.0 Kgs
6.0 Kgs
5.0 Kgs
4.2 Kgs
3.5 Kgs
2.5 Kgs
1.5 Kgs
1.1 Kgs
0.8 Kgs
0.3 Kgs
71 Liters
65 Liters
60 Liters
56 Liters
52 Liters
48 Liters
43 Liters
38 Liters
33 Liters
18 Liters
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
3. FEATURES AND TECHNICAL INFORMATION
Program
Time
Normal
Approx. 47 - 56 min
Mini
Approx. 20 min
Soak
Approx. 107 min
High Speedy
Approx. 21 - 27 min
Blanket
Approx. 55 min
Delicate
Approx. 29 - 32 min
Tub Hygiene
Approx. 150 min
Soak 1 hour
Approx. 107 min
Soak 8 hour
Approx. 527 min
Product special features
• Dial indicating detergent level after sensing wash level
• Pre-set timer
• Fabric softener dispenser
• Detergent dispenser
• Automatic power-off when finish
• Dial indicating unusual sign (LED will blink)
• Alarm ON-OFF
• Overflow sensing device
• Ag Shower (NA-F80H1 / NA-F90H1 only)
- This has the disinfection effect with Ag+
- This can be used for the course marked with ★
Weight Sensor
The weight is sensed by the moving force of the Pulsator,
which changes a capacitor pole and releases a signal wave.
The wave is changed into a pulse number from which the
clothes weight is sensed. Prior to weight sensing for Normal
and Strong program, the machine runs without water by
spinning the Pulsator to left and right for 4.2 seconds
(ON 0.3 second- OFF 0.4 second).
The motor stops (OFF), a water system counts the pulse
number, then calculates the accumulated pulse numbers for
drawing water into the tub over a defined level. The dial will
indicate High wash level.
-5-
High
Low
Medium
Pulse Number
Low
High
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
3.1 Function Control with Fuzzy sensor
Clothes quantity checking, wash level indication and detergent consumption indication with Fuzzy Logic
System.
Turn Switch “ON”
Press “Start” button
1. Check clothes quantity
2. Check ambient
temperature
1. Check clothes quantity and specify the amount of
detergent
<Checking Method>
Check cross pressure at the
capacitor while the Pulsator operates
without water.
<Motor status>
Rotate clockwise
Rotate clockwise
Rotate clockwise
stop
stop
stop
stop
A. Check clothes
quantity
B. Control wash time
C. Control spin time
Supply water to a proper
level
stop
Rotate
anti-clockwize
stop
Rotate
anti-clockwize
Rotate
anti-clockwize
2. Temperature checking
Check temperature in the atmosphere when the machine
starts. In case of low temperature, wash timer and spin timer are
extended automatically so that washed clothes are as clean as
washing in high temperature.
1. Wash timer and spin timer with checked clothes quantity
WASH
RINSE
SPIN
Switch will automatically
cut the power current
“OFF”
High
Medium
Low
3.0 Kg and more
1.2 Kg~3.0 Kg
0 Kg~1.2 Kg
Wash Timer
12 min.
12 min.
9 min.
Spin Timer
6 min.
6 min.
5 min.
2. Additional wash timer and spin timer as temperature
increases
External temp.
25°C
15°C
5°C
30°C
Wash Timer
+0 min.
+2 min.
+3 min.
-1 min.
Spin Timer
+0 min.
+1 min.
+2 min.
+0 min.
-6-
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
3.2 Power input and current
This clause of SA60335-2-4 and SA60335-2-7 is applicable except as follows.
(1) Washing
NA-F90H2
Power source
220V
50Hz
220 - 240V 50Hz
230V
60Hz
NA-F80H2
Water load
Rated load
Water load
Rated load
Current (A)
1.6 - 2.4
1.8 - 2.6
1.6 - 2.4
1.8 - 2.8
Power consumption (W)
306 - 374
405 - 495
324 - 396
423 - 517
Current (A)
1.6 - 2.4
1.8 - 2.6
1.6 - 2.4
1.8 - 2.8
Power consumption (W)
342 - 418
423 - 517
360 - 440
441 - 539
Current (A)
2.1 - 2.9
2.2 - 3.0
2.1 2.9
2.2 - 3.0
Power consumption (W)
387 - 473
459 - 561
414 - 506
486 - 594
Note: To determine the value, integrate the data for 2min after 5min from
starting motor and convert based on duty ratio of water flow for that period.
(2) Spinning
NA-F90H2
Power source
220V
50Hz
220 - 240V 50Hz
230V
60Hz
NA-F80H2
Water load
Rated load
Water load
Rated load
Current (A)
0.7 - 1.3
0.8 - 1.4
0.7 - 1.3
0.9 - 1.5
Power consumption (W)
193 - 237
207 - 253
216 - 264
234 - 286
Current (A)
0.7 - 1.3
0.8 - 1.4
0.9 - 1.5
0.9 - 1.5
Power consumption (W)
221 - 269
234 - 286
252 - 308
270 - 330
Current (A)
1.1 - 1.9
1.2 - 2.0
1.1 - 1.9
1.2 - 2.0
Power consumption (W)
270 - 330
297 - 363
279 - 341
297 - 363
Note: To determine the value, integrate the data for 2.5min after 3.5min from
starting motor and convert based on duty ratio of water flow for that period.
-7-
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
4. INSTALLATION
4.1 Checking of placement
Connect the water supply hose
to the water supply valve screw.
Elbow
Water supply
valve screw
Nut
1. Push the water supply hose nut straights onto
the water supply valve screw.
2. Hold the elbow by lifting it up, screw the nut
onto the water supply valve screw, and firmly
tighten the nut.
3. After the nut is tightened, check whether or
not the elbow is unsteady or loose.
4. After tightening, open the faucet to confirm
that there is no water leakage.
[Cautions]
Firmly tighten the nut, otherwise water leakage
will result.
Water Pressure Rating :
2.9 x 104 ~ 9.8 x 105 Pa
Hose extension
If extended external part is necessary when connecting the drain hose, the length of the drain hose should be
less than 3 m and the height should be below 10 cm.
Do not put hose tip
under the water
Below 10 cm
Good Example
3 m max.
Over 10 cm
Install the machine 10 cm or more away from the wall.
-8-
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
4.2 Connect the water supply hose
[Note]
- Firmly tighten part B of the water tap adaptor,
otherwise water leakage will result.
- When the hose must be reinstalled (after you
remove, for example), turn B to the lelt until
about 4 mm of the thread becomes visible,
then carry out the procedure described above.
Screw (4)
Water faucet
Water tap
adaptor
A
B
Lever
Water supply
hose cover
Approx. 4 mm
B
4.3 Install Washing Machine to steady
- If a water tap adaptor is already connected,
replace with the attached new one.
Adjust Height of leg
1. Turn the adjustable leg knob towards (Loosen)
direction to loose it.
2. Turn the adjustable leg to adjust the levelness.
2.1 When increasing height, turn adjustable leg
towards (Loosen) direction.
2.2 When decreasing height, turn adjustable leg
towards (Tighten) direction.
3. Turn the adjustable leg knob towards (Tighten)
direction to tighten it.
If the floor is largely inclined
Use board or
a like for prop
up under leg
of washing
machine
Adjustable leg knob
Tighten
Loosen
Adjustable leg
To raise
To lower
4.4 Child Lock program
Press the [POWER OFF/ON] button for at least
5 seconds. The buzzer sounds (two time for
setting) and the [CHILD LOCK] indication turns
on.
Open lid
Less than
10 sec.
More than
10 sec.
Buzzer on
Water drain
Close lid
Buzzer on and
abnormal alarm
-9-
Buzzer off
Unplug the power
cord from the
outlet and re-plug
it again after
5 seconds
Water
Level
Linear Water Level
71
60
52
43
33
18L
Wash
12
9
6
3 min
- 10 -
NA-F80B2.
RINSE
(NA-F80B2 )
69
60
52
43
33
18L
WATER LEVEL (Water Volume Display)
   
RESERVE
Rinse
1 times
Refill
3
2
Spin
5
3 min
40s
7
hours
min
Child Lock
WASH/SPIN
AIR DRY
Reserve
Program
Reserve
Time Left
TIME DISPLAY
Air Dry
4 Extra Rinse
Program
Off
Pause
NA-F90B2
START/PAUSE
On
Start
( Auto Off )
PROGRAM (Course Select)
(Press 5 seconds)
Child Lock/Unlock
7 Tub Hygiene
6 Soak
2 Speedy
3 Delicate
5 Blanket
1 Normal
Power
OFF/ON
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
5. OPERATIONS PANEL
5.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
WASH, SPIN
WATER LEVEL
RINSE
RESERVE
TIME DISPLAY
AIR DRY
- 11 AG CRYSTAL SHOWER
PROGRAM
OFF/ON
START/PAUSE
NA-F90H2
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
5.2 NA-F80H2 / NA-F90H2
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
6. WIRING DIAGRAM
6.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
6.2 NA-F80H2 / NA-F90H2
- 12 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
7. TABLE OF ERRORS
Error Indication
If the following indications appear on the display panel (buzzer sounds, U and H Characters appear).
• Check if abnormalities listed below are seen in the external water hose.
• Is the hose connected?
• Is it clogged with lint?
• Is it crushed?
• Is the tip soaked in water?
• Is a part of hose at a height of over 10 cm midway?
• Is the extension hose longer than 3 m?
• Is the hose being used too small?
Restart with
opening
and closing
the lid.
• Check if the lid is opened.
• Close the lid.
• Is the washing machine is an unsteady position, or is it on an inclined floor surface?
• Is the laundry unevenly distributed in the tub?
• Arrange the laundry evenly in the tub, then close the lid.
• Check if you have forgotten to connect the water hose and
to turn on the faucet.
• Is the water supply cut off?
Restart with opening
and closing the lid.
• Check if lid is open when draining operation of the [CHILD LOCK] program is ON.
• In case of H displays such as “H01”, with no buzzer sounds pull out the power plug, and
contact your dealer for service.
- 13 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
8. TROUBLESHOOTING
Machine
No light at the dial
does not work Dial light is on
Unusual
amount of
water inside
machine
Packing valve
Holding spring
Capacitor
Mechanism case
Gear motor
Water level sensor
Safety switch
Control panel
Corresponding device
Problem
(have to check)
Water Inlet Valve
8.1 Table of Troubleshooting
Others
0
0 0
No sound of water from inlet valve
0 0
There is sound of water from inlet valve
Check water supply
Not enough water flow
Check water supply
Water never stops flowing in
0 0 0
Washing
Pulsator does not spin (no sound of motor)
system
Pulsator does not spin (there is sound of
does not work motor)
0
Motor
0 0
Pulsator spins only one way
0
Pulsator spins slowly
0
Unusual
draining
No draining
0
Drains slowly
0
Unusual
spinning
system
No spinning (no sound of motor)
Belt, Motor
0
Pulley, Motor
Belt, Motor
0
0
0
No spinning (Pulsator spins)
0
0
No force in spinning (tub spins slowly)
0
Unusual loud
noise
Loud noise during dry spinning
0
Check installation
Water leak
Water leaks from drain pipe
0 0
Something clogged
Incorrect
working
Loud noise during washing
Belt, Motor
Water leaks at the bottom of machine
Drain pipe A, Pulsator
Water is supplied during spinning
Unbalanced tub,
leaning
Rinses more than 3 times
0
Pulsator spins despite no water
0
Cannot change function program
0
0
0
Unbalanced tub,
leaning
Air pipe clogged
Description of usage
Water does not flow out of a filter
Description of usage
No overflow during water filling as rinsing
Description of usage
Selected washing program cannot be
memorized
Description of usage
Fabric softener flows away too fast
Description of usage
Pulsator spins in short range as washing and
rinsing
Description of usage
Works at low wash level then supplies water
again
Description of usage
- 14 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
8.2 The following symptoms are not trouble.
Symptoms
Causes
Machine begins filling water in
the middle of the wash.
• When the laundry amount is large at the HIGH water level, the machine
sometimes fills automatically. When level goes down, the machine
fills automatically.
The water level is too high for
the amount of laundry being
washed.
• When the laundry is already soaked with water before the wash is
started, or if there is water in the tub before the wash is started, the
water level will sometimes be higher.
The water level is too low for the
amount of laundry being washed.
• With light laundry made of synthetic or blended fabric, the water level
will sometimes be lower.
Midway during spinning, the
operation suddenly changes to
rinsing.
• When the laundry is unbalanced during spin, rinsing and automatic
correction of unbalanced laundry will begin. Later spinning will return
to normal condition.
Water does not flow through the
lint filter. Double Cascade does
not operate.
• When the water level is set to very low, water sometimes will not flow
through the lint filter. Double Cascade does not operate when these
settings have been selected.
The water is drained even filled
by a bucked.
• Do not leave more than 15 seconds while powered on.
Fill the water while powered off or after pushing the start button.
Softener spills out from softener
drawer.
• Keep the level of the softener indicated to prevent the softener from
flowing immediately.
• If you close the softener drawer forcefully, softener may spill out of
the drawer.
During draining, the laundry and
the spinner rotates with irregular
movements.
• To suppress soap suds build-up, the washing tub turns slowly and
quickly.
The buttons do not work.
• Only the [WATER LEVEL] button is available after the machine begins
washing.
• To change the setting, press the [Power Off] button and reconfigure
the setting.
If you start with the rinse cycle,
the tub is not filled with water.
• When there is water in the tub, the operation starts with the draining.
After spin cycle is finished, the tub will be filled with water.
Washing machine does not run
at all.
• Check if there is power failure.
• Check if the power fuse has blown out or the breaker is actuated.
• Check if the power plug is plugged in thoroughly.
• Check if the “power switch” has been pressed.
• Has the water faucet been turned on?
• Check if the [START/PAUSE] button has been pressed.
• Has the machine been programmed under [RESERVE] timer?
- 15 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
Symptoms
Causes
Water is not supplied.
• Check if the water faucet is turned on.
• Is the water supply cut off?
• Check if the connection of the water supply hose is clogged with dirt.
• Check if the lid is opened. Close the lid.
Washing operation still continue
even though the expected
finishing time had passed on
Reserve Program.
• Washing time will be longer because of laundry unbalance, water
feeding and draining condition.
Buzzer sounds followed by a
draining when opening the lid
during wash and rinse.
• In the case when open the lid after setting the [CHILD LOCK] mode, it
will force the draining process. Pull out power plug from the outlet and
replug it after 5 seconds.
Buzzer sounds when opening
the lid during cascade rinsing
or spinning.
• This is a remainder for a user not to put a hand and / or any object into
the tub. It is not out of order.
To turn off the buzzer, close the lid.
Tub shaking with the sound of
water.
• This is the sound of the liquid to maintain the balance during spinning.
Water supply failure.
• Normally after the water supply failure, the water will become muddy.
Detach the water feeding hose and turn on the water faucet to release
to due muddy water. Fix water hose and start washing.
Power failure.
• In this case, [Power On] and [Start/Pause] buttons need to be pressed
again after electricity is restored. Then the machine will resume operation
automatically from beginning of the stopped process.
- 16 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
9. DISASSEMBLY INSTRUCTION
9.1 Remove Screws of Back Panel out
Fig. 1
- Take out by use screwdriver.
9.2 Remove Back Panel out
Fig. 2
Fig. 3
- Insert fingers through inside of Back Panel (Fig. 2).
- Pull it back a little for Hooks at upside loose (Fig. 3).
Fig. 4
Fig. 5
- Use the finger for pull end of Hook (Fig. 5) loose from the Base Unit (Fig. 4)
- After Hook loose 1 side / We can remove it by twist Back Panel a little.
- If it is difficult to remove / Have to use the finger to pull another side.
- 17 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10. PARTS EXPLODED VIEW AND REPLACEMENT PARTS LIST
10.1 Parts Exploded View : Part A
A22
A23
A24
A35
A34
NA-F80H2/NA-F90H2
NA-F80H2/NA-F90H2
A4
A13
A25
NA-F80H2/NA-F90H2
A28
A15
A27
A16
A11
A26
A21
NA-F80H2 / NA-F90H2
A5
NA-F78B2, 80B2
NA-F90B2 / F1002B
A7
A7
A18
A12
A8
A8
A14
A17
A1
A1
NA-F78B2 / NA-F80B2
NA-F90B2 / F1002B
NA-F80H2 / NA-F90H2
A6
A10
A19
A29
A3
A9
A20
A2
A30



E
B
A
coVA
EADDV
Li
ET
BA
ar
A
ne
at
T
W
er
12
9
er
at l
W ve
La
l
ve
Le
71
60
52
43
33 L
18
A31
6
3
W
ll
efi
R
3
in
m
2
ash
1
7
5
3
se
Rin
es
tim
Pr
in
e Le
in
Sp
e
m
rv
Ti
m
se
ra
Re
og
s
40
m
ft
Ch
A32
ild
Lo
ck
er
1
ve
s
ur
ho in
m
Res
4
et
nk
ne
la
B
ak ygie
5
H
So
6
b
al
7 Tu
orm edy
N
am
e
te
gr
Sp lica inse
2
Pro
e
R
D
ra
3
Ext
A
ir
D
ry
(
er )
w Off
PoAuto
ff
O
n
O
(Pr
ck
nlo s)
/U
ck cond
Lo Se
ild s &
Ch es
P
rt
Staause
2
B
90
A-F
N
A33
- 18 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
Important safety notice :
Components identified by mark have special characteristics important for safety.
When replacing any of these components, use only manufacturer's specified part.
10.2.1 Replacement Parts List : Part A of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
Parts List
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
COUNTRY / Q’TY
F78B2 F80B2 F90B2 F1002B TH
A1
PANEL A
AXW01307LF00
1
A2
PANEL FACE B
AXW01467LF00
1
SIN- SININDO VIET MAL INDIA
DBD RBD
1
1
AXW01467LF50
AXW01467LJA0
AXW001G7LF00
A5
LID PACKING A
AXW01646UP00
1
UAEPGF
LIB
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A6
LEVELLER
AXW03536DKA0
1
A7
SPINNER LID LABEL
AXW11177BK0A
1
A8
FEEDING PORT PACKING AXW02676UP00
A9
PRINT BASE UNIT
AXW11177BK5A
1
AXW024Q7LF00
S
1
AXW024Q7LJ00
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A10 CONNECTOR LEAD WIRE AXW014A7LF00
UNIT
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A11 FEEDING VALVE
AXW292120906
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A12 PRESSURE SENSOR UNIT AXW024T03510
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
A13 LID HINGE SHAFT
AXW01937JS00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
A14 SUB DRAIN HOSE UNIT
AXW002Q7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A15 DETERGENT CASE UNIT
AXW021B6XC00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A16 SAFETY SWITCH
AXW166123700
A17 CONTACT LEVER B
AXW16966XB00
REMARK
1
AXW01467RP00
LID UNIT
1
LEB
1
AXW01467RN00
A4
1
BAR
1
AXW01467LJ50
AXW01027LE0E
1
UAEKUW OMAN QAT
AFP
1
AXW01467LJ00
BODY B
1
1
AXW01467LFA0
A3
1
PHI
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A18 SWITCH LEVER
AXW11927LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A19 LID HINGE SPRING
AXW11167LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A20 PANEL FACE A
AXW01457LF00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A21 DETERGENT CASE B
AXW21516XC0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A26 INSTRUCTION B
AXW99596XB0J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A27 NOZZLE HOLDER
AXW08396XC0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A30 INSULATION SPACER A
AXW04867LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A31 CONTROLLER UNIT
AXW024C7LF06
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A32 INSULATION SPACER B
AXW04877LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A33 PANEL A SHEET
AXW01437LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
Screws
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
COUNTRY / Q’TY
F78B2 F80B2 F90B2 F1002B TH
SIN- SININDO VIET MAL INDIA
DBD RBD
PHI
UAEKUW OMAN QAT
AFP
REMARK
SPECIAL TAPPING SCREW XTWAXW469J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
BODY B ~ BODY AU
BINDING TAPPING SCREW XTB4+12CFJ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
NOZZLE UNIT
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFETY SW. ~ BODY B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
PANEL A
XTB4+15CFJ
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
PRINT BASE U ~ BODY B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
FEEDING VALVE ~ BODY B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
CONTROLLER HOLDER ~
BODY B
- 19 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.2.2 Replacement Parts List : Part A of NA-F80H2 / NA-F90H2
Parts List
COUNTRY / Q’TY
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
F80H2 F90H2
TH
VIET
1
A1
PANEL A
AXW01307LE00
1
A2
PANEL FACE B
AXW01467LE00
1
AXW01467LE50
AXW01467LEA0
SINMAL INDIA
DBD
1
1
1
1
BODY B
AXW01027LE0A
LID UNIT
AXW001G7LE00
A5
LID PACKING A
LEB
UAEPGF
LIB
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW01646UP00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
S
A6
LEVELLER
AXW03536DKA0
1
A7
SPINNER LID LABEL
AXW11177BK0A
1
A8
FEEDING PORT PACKING
AXW02676UP00
A9
PRINT BASE UNIT
AXW024Q7LE00
S
AXW024Q7LG00
S
AXW11177BK5A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A10
CONNECTOR LEAD WIRE UNIT
AXW014A7LE00
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A11
FEEDING VALVE
AXW292120806
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A12
PRESSURE SENSOR UNIT
AXW024T03510
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A13
LID HINGE SHAFT
AXW01937JS00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
A14
SUB DRAIN HOSE UNIT
AXW002Q7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A15
DETERGENT CASE UNIT
AXW021B7LE00
A16
SAFETY SWITCH
AXW166123700
A17
CONTACT LEVER B
A18
SWITCH LEVER
A19
REMARK
1
AXW01467LGA0
A4
PHI
1
AXW01467LG50
A3
1
BAR
UAEKUW OMAN QAT
AFP
SINRBD
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW16966XB00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW11927LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
LID HINGE SPRING
AXW11167LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A20
PANEL FACE A
AXW01457LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A21
DETERGENT CASE B
AXW21516XB0A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A22
WINDOW
AXW21057LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A23
TABLET PLATE
AXW07537BK0A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A24
TABLET UNIT
AXW007E7BK10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A25
NOZZLE UNIT
AXW008E7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A26
INSTRUCTION B
AXW99596XB0J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A27
NOZZLE HOLDER
AXW08396XB0A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A28
PANEL A SEAL
AXW11637BK0A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A29
INSTRUCTION C
AXW99607BK00
1
S
AXW99607BK50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A30
INSULATION SPACER A
AXW04867LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A31
CONTROLLER UNIT
AXW024C7LE06
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A32
INSULATION SPACER B
AXW04877LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A33
PANEL A SHEET
AXW01437LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A34
FILTER C UNIT
AXW003V7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A35
FILTER COVER
AXW22087LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
Screws
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
F80H2 F90H2
COUNTRY / Q’TY
TH
VIET
SINMAL INDIA
DBD
SINRBD
PHI
UAEKUW OMAN QAT
AFP
REMARK
SPECIAL TAPPING SCREW
XTWAXW469J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
BODY B ~ BODY AU
BINDING TAPPING SCREW
XTB4+12CFJ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
NOZZLE UNIT
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFETY SW. ~ BODY B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
PANEL A
XTB4+15CFJ
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
PRINT BASE U ~ BODY B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
FEEDING VALVE ~ BODY B
XTB4+15CFJ
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
WINDOW ~ NOZZLE B
XTB4+15CFJ
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
CONTROLLER HOLDER ~
BODY B
- 20 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.3 Parts Exploded View : Part B
B16
B20
B14
B17
B7
B14
B18
B1
B8
B2
B19
B2
B15
B16
B9
B10
B11
B21
C24
B22
B3
B4
B4
B4
B5
B6
Accessories
B12
B13
- 21 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.4.1 Replacement Parts List : Part B of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
Parts List
MODEL
REF.
NO.
B1
PART NAME
BODY A UNIT
PART NO.
SAFETY
COUNTRY / Q’TY
F78B2 F80B2 F90B2 F1002B TH
AXW001A7LE0E
INDO VIET MAL INDIA
1
AXW001A7LE5E
1
1
1
1
SIN- SINDBD RBD
1
PHI
1
UAEKUW OMAN QAT
AFP
1
1
1
1
BAR
LEB
UAEPGF
LIB
1
1
1
1
1
GRIP
AXW01107JP0J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
B3
BASE A
AXW03017JP10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B4
LEG COVERING
AXW03397JS00
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B5
ADJUSTABLE LEG THUMB AXW03436JZ00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B6
ADJUSTABLE LEG
AXW03357EC00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B7
CAPACITOR
AXW04037P917
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B8
BACK PANEL
AXW01566ZV10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B9
POWER CORD UNIT
AXW004A83400
S
AXW004A77264
S
1
1
1
1
1
1
AXW047A72914
S
AXW004A72934
S
AXW004A73014
S
AXW004A73503
S
B10 CHEMICAL COVER
B11 DRAIN INSTRUCTION
1
1
1
1
TYPE : C2 + EARTH
TYPE : C2
1
AXW99047BK10
B13 BOTTOM COVER
TYPE : S3
1
TYPE : C3
1
TYPE : B3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW99047BK60
COLOUR : GREY
TYPE : A2
1
1
AXW012D7BR00
1
1
AXW04487EC00
B12 SERVICE PRESSURE
HOSE UNIT
1
COLOUR : GREY
COLOUR : GREY
(EXT-EARTH)
B2
S
REMARK
LANGUAGE : THAI
LANGUAGE : ENGLISH
AXW21586ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B14 BODY A PROTECTION (B-L) AXW90466NTB0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
t = 30 mm
B15 BODY A PROTECTION (F) AXW90467LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
t = 40 mm
B16 BODY A PROTECTION (B-R) AXW90466AA6M
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
t = 1 mm x 120 mm
B17 BODY A PROTECTION (L) AXW90467JP50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
t = 1 mm x 240 mm
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B18 NAME PLATE
AXW01537LF00
S
AXW01537LF50
S
AXW01537LJ00
S
AXW01537LJ50
S
AXW01537LJF0
S
AXW01537RN00
S
AXW01537RP00
S
1
1
1
1
1
1
1
1
B19 WIRING DIAGRAM
AXW04707LF00
1
B20 EARTH WIRE UNIT
(EXTERNAL)
AXW030C6SP20
B21 HOSE HOLE COVER A
AXW01287JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B22 FLEXIBLE HOSE B UNIT
AXW002E6XB10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
S
1
1
1
1
1
1
1
1
1
1
Screws
COUNTRY / Q’TY
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
PAN HEAD SCREW
XSN5+10BNS
1
1
SPECIAL TAPPING
SCREW
XTTAXW444J
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
FOR BASE A
XTTAXW444J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
FOR BACK PANEL
XTTAXW444J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
FOR BOTTOM COVER
PAN HEAD TAPPING
SCREW
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FOR EARTH U ~ BODY A
BIND TAPPING SCREW
XYNAXW438J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FOR CAPACITOR
F78B2 F80B2 F90B2 F1002B TH
SIN- SININDO VIET MAL INDIA
DBD RBD
PHI
UAEKUW OMAN QAT
AFP
1
- 22 -
REMARK
FOR EARTH WIRE UNIT
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.4.2 Replacemen4 Parts List : Part B of NA-F80H2 / NA-F90H2
Parts List
MODEL
REF.
NO.
B1
PART NAME
BODY A UNIT
PART NO.
SAFETY
F80H2 F90H2
AXW001A7LE0A
COUNTRY / Q’TY
TH
1
AXW001A7LE5A
B2
GRIP
B3
B4
VIET
SINMAL INDIA
DBD
1
1
2
2
2
BASE A
AXW03017JP10
1
1
1
LEG COVERING
AXW03397JS00
4
4
4
B5
ADJUSTABLE LEG THUMB
AXW03436JZ00
1
1
B6
ADJUSTABLE LEG
AXW03357EC00
1
B7
CAPACITOR
AXW04037P917
B8
BACK PANEL
AXW01566ZV10
B9
POWER CORD UNIT
AXW004A72934
S
AXW004A83400
S
AXW040A73503
S
AXW004A77264
S
AXW004A72914
S
AXW004A73014
S
B11 DRAIN INSTRUCTION
UAEKUW OMAN QAT
AFP
BAR
LEB
UAEPGF
LIB
1
1
1
1
1
1
1
COLOUR : SILVER
COLOUR : GREY
COLOUR : SILVER (EXT-EARTH)
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
4
4
4
4
4
4
4
4
4
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
TYPE : C3
1
TYPE : A2
1
TYPE : B3P
1
1
1
1
1
1
1
1
1
TYPE : S3
1
1
1
1
1
1
AXW99047BK10
1
1
TYPE : C2 + EARTH
TYPE : C2
1
AXW04487EC00
REMARK
1
1
2
S
PHI
1
1
AXW01107JP0J
B10 CHEMICAL COVER
1
SINRBD
1
1
1
1
1
1
1
1
1
1
1
AXW99047BK60
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B12 SERVICE PRESSURE HOSE UNIT
AXW012D7BR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B13 BOTTOM COVER
AXW21586ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B14 BODY A PROTECTION (B-L)
AXW90466NTB0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
t = 30 mm
B15 BODY A PROTECTION (F)
AXW90467LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
t = 40 mm
B16 BODY A PROTECTION (B-R)
AXW90466AA6M
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
t = 1 mm x 120 mm
B17 BODY A PROTECTION (L)
AXW90467JP50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
t = 1 mm x 240 mm
B18 NAME PLATE
AXW01537LE00
S
AXW01537LE50
S
1
1
1
1
1
1
1
1
1
1
AXW01537LEF0
S
AXW01537LGA0
S
AXW01537LG50
S
1
1
1
1
1
1
1
1
1
1
1
1
1
B19 WIRING DIAGRAM
AXW04707LE00
B20 EARTH WIRE UNIT (EXTERNAL)
AXW030C6SP20
B21 HOSE HOLE COVER A
AXW01287JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
B22 FLEXIBLE HOSE B UNIT
AXW002E6XB10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
1
S
1
1
1
1
1
1
1
Screws
COUNTRY / Q’TY
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
F80H2 F90H2
TH
VIET
SINMAL INDIA
DBD
SINRBD
PHI
1
UAEKUW OMAN QAT
AFP
REMARK
FOR EARTH WIRE UNIT
PAN HEAD SCREW
XSN5+10BNS
SPECIAL TAPPING SCREW
XTTAXW444J
10
10
10
10
10
10
10
1
10
10
10
10
10
10
10
10
FOR BASE A
XTTAXW444J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
FOR BACK PANEL
XTTAXW444J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
FOR BOTTOM COVER
PAN HEAD TAPPING SCREW
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FOR EARTH U ~ BODY A
BIND TAPPING SCREW
XYNAXW438J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FOR CAPACITOR
- 23 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.5 Parts Exploded View : Part C
C1
C2
C3
C4
C5
C6
C22-1
C25
C7
C26
C27
C22
C8c
C8c
(For H2 Model)
C8a
C8b
C9
C17
C28
C16
C24
C29
C19
C10
C23
C18
C11
C12
C20
C21
C13
C14
C15
- 24 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.6.1 Replacement Parts List : Part C of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
Parts List
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
COUNTRY / Q’TY
F78B2 F80B2 F90B2 F1002B TH
INDO VIET MAL INDIA
SIN- SINDBD RBD
PHI
UAEKUW OMAN QAT
AFP
BAR
LEB
UAEPGF
LIB
C1
OUTER TUB COVER
AXW32246CH10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C2
O-RING
AXW02577BK00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C3
PULSATOR
AXW05016ZR0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C4
SHAFT BUSHING
AXW05046ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C5
SPINNER SHAFT FLANGE AXW15176RU00
NUT
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C6
SPINNER FLANGE
WASHER B
AXW151980200
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C7
FILTER UNIT
REMARK
AXW022A7JT0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRAME : GREY
C8a SUSPENSION UNIT (F-L)
AXW034U7LEA0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRONT : LEFT
C8b SUSPENSION UNIT (F-R)
AXW034U7LE50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRONT : RIGHT
C8c SUSPENSION UNIT (R-RL) AXW034U7LE00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
REAR : RIGHT & LEFT
C9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
OUTER TUB A
AXW12016CG20
C10 MOTOR WASHER A
AXW04207BK00
C11 MOTOR
AXW040158606
S
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
C12 MOTOR WASHER B
AXW04217BK10
2
2
2
2
2
2
2
C13 MOTOR PULLEY
AXW04116XB00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW04107LE00
C14 V-BELT
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW041219850
1
AXW04127BL50
C15 SPINNER PLATE B
AXW32327BL00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C16 VALVE UNIT
AXW009D6ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C17 GEARED MOTOR
AXW348202516
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C18 LEAD WIRE UNIT
AXW014B6UP00
S
C19 OVER FLOW HOSE B
AXW02345TW0M
C20 EARTH WIRE UNIT
(INTERNAL)
AXW003F6UP00
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C21 MECHA-CASE UNIT
AXW020A6UA60
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C22 TUB UNIT
AXW002A7LF00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C22-1 BALANCER UNIT
C23 FLEXIBLE HOSE A UNIT
AXW035A5TP0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW002D6RU00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C24 HOSE BAND
AXW02457EC00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C25 TUB C UNIT
AXW12U6ZR0E
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
C26 TUB B UNIT
AXW012T7BK0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C28 BALANCE WEIGHT
AXW12317LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C29 OUTER TUB B
AXW12027BK00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
Screws
MODEL
REF.
NO.
PART NO.
SPECIAL TAPPING
SCREW
XTWAXW529
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
TUB A ~ TUB D
XTBAXW453
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
TUB A ~ TUB C
PAN HEAD TAPPING
SCREW
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EARTH U ~ BODY A
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EARTH U ~ OUTER TUB B
SPECIAL SMALL SCREW
XSSAXW682
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PULSATOR UNIT
SPECIAL BOLT
XVGAXW703J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MOTOR PULLEY
XVGAXW839J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
MOTOR
XVGAXW812J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
MECHA CASE ~ OUTER
TUB B
XTWAXW6517J
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
OUTER TUB A, B
XTWAXW6517J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SPINNER PLATE B
XTWAXW6518J
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
GEARED MOTOR (CLUTCH)
XTWAXW435
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
OUTER TUB COVER
XTWAXW6517J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
VALVE UNIT
SPECIAL TAPPING
SCREW
SAFETY
COUNTRY / Q’TY
PART NAME
F78B2 F80B2 F90B2 F1002B TH
INDO VIET MAL INDIA
- 25 -
SIN- SINDBD RBD
PHI
UAEKUW OMAN QAT
AFP
REMARK
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.6.2 Replacement Parts List : Part C of NA-F80H2 / NA-F90H2
Parts List
COUNTRY / Q’TY
MODEL
REF.
NO.
PART NAME
PART NO.
SAFETY
F80H2 F90H2
TH
VIET
SINMAL INDIA
DBD
SINRBD
PHI
UAEKUW OMAN QAT
AFP
BAR
LEB
UAEPGF
LIB
REMARK
C1
OUTER TUB COVER
AXW32246CH10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C2
O-RING
AXW02577BK00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C3
PULSATOR
AXW05016ZR1E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C4
SHAFT BUSHING
AXW05046ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C5
SPINNER SHAFT FLANGE NUT
AXW15176RU00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C6
SPINNER FLANGE WASHER B
AXW151980200
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C7
FILTER UNIT
AXW022A7FX1A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRAME : BLUE
C8a
SUSPENSION UNIT (F-L)
AXW034U7LEA0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRONT : LEFT
C8b
SUSPENSION UNIT (F-R)
AXW034U7LE50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
FRONT : RIGHT
C8c
SUSPENSION UNIT (R-RL)
AXW034U7LE00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
REAR : RIGHT & LEFT
C9
OUTER TUB A
AXW12016CG20
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C10
MOTOR WASHER A
AXW04207BK00
C11
MOTOR
AXW040157626
C12
MOTOR WASHER B
C13
MOTOR PULLEY
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AXW04217BK10
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
AXW04116XB00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
S
AXW04107FV00
C14
V-BELT
1
AXW041219850
1
1
1
1
1
1
AXW04127BL50
1
C15
SPINNER PLATE B
AXW32327BL00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C16
VALVE UNIT
AXW009D6ZR00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C17
GEARED MOTOR
AXW348202516
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C18
LEAD WIRE UNIT
AXW014B6UP00
S
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C19
OVER FLOW HOSE B
AXW02345TW0M
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C20
EARTH WIRE UNIT (INTERNAL)
AXW003F6UP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C21
MECHA-CASE UNIT
AXW020A6UA60
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C22
TUB UNIT
AXW002A7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C22-1 BALANCER UNIT
AXW035A5TP0E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
S
C23
FLEXIBLE HOSE A UNIT
AXW002D6RU00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C24
HOSE BAND
AXW02457EC00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C25
TUB C UNIT
AXW012U6ZR0E
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
C26
TUB B UNIT
AXW012T7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C27
FILTER B UNIT
AXW003W7LG00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C28
BALANCE WEIGHT
AXW12317LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C29
OUTER TUB B
AXW12027BK00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BAR
LEB
UAEPGF
LIB
Screws
MODEL
REF.
NO.
PART NAME
SPECIAL TAPPING SCREW
PART NO.
SAFETY
F80H2 F90H2
COUNTRY / Q’TY
TH
VIET
SINMAL INDIA
DBD
SINRBD
PHI
UAEKUW OMAN QAT
AFP
REMARK
XTWAXW529
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
TUB A ~ TUB D
XTBAXW453
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
TUB A ~ TUB C
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EARTH U ~ BODY A
XTN4+8HFJ
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
EARTH U ~ OUTER TUB B
SPECIAL SMALL SCREW
XSSAXW682
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PULSATOR UNIT
SPECIAL BOLT
XVGAXW703J
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MOTOR PULLEY
XVGAXW839J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
MOTOR
XVGAXW812J
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
MECHA CASE ~ OUTER TUB B
XTWAXW6517J
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
OUTER TUB A, B
XTWAXW6517J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SPINNER PLATE B
XTWAXW6518J
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
GEARED MOTOR (CLUTCH)
XTWAXW435
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
OUTER TUB COVER
XTWAXW6517J
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
VALVE UNIT
PAN HEAD TAPPING SCREW
SPECIAL TAPPING SCREW
- 26 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.7 Parts Exploded View : Packing Part
7
8
6
12
5
9
1
3
2
10
11
4
- 27 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.8.1 Replacement Parts List : Packing of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B
Parts List
MODEL
REF.
NO.
1
PART NAME
PROTECTION CASE A
PART NO.
AXW90017LE00
SAFETY
COUNTRY / Q’TY
F78B2 F80B2 F90B2 F1002B TH
INDO VIET MAL INDIA
SIN- SINDBD RBD
PHI
UAEKUW OMAN QAT
AFP
BAR
LEB
UAEPGF
LIB
REMARK
1
AXW90017LE50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CORNER CUSHION
(F-SIDE)
AXW90157JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 SET
CORNER CUSHION
(B-SIDE)
AXW90157JP50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 SET
3
CORNER PAD
AXW90167JP00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
PROTECTION CASE B
UNIT
AXW090B7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
POLYETHYLENE COVER
AXW90607JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
OPERATING
INSTRUCTION
AXW99017LF00
1
1
1
1
1
1
1
1
1
1
1
1
1
2
AXW99017LF50
AXW99017LFA0
1
AXW99017LFF0
1
AXW99017LFK0
AXW99017RN00
1
7
SPIN TUB SUPPORTER
AXW90857LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
ACCESSORY BAG
AXW90576UP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9
BODY COVER
AXW90047LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
STOCK CARD
AXW99187LF00
1
AXW99187LJ00
1
1
1
1
1
1
1
1
1
AXW99187RN00
1
AXW99187LF50
1
AXW99187LJ50
1
AXW99187RP00
1
AXW99187LFA0
1
AXW99187LJA0
1
AXW99187LJF0
1
AXW99187LFK0
1
AXW99187LJK0
1
AXW99187LFP0
1
AXW99187LJP0
1
AXW99187LJU0
1
AXW99187LJX0
AXW99187LJZ0
11
CASE PLATE A
AXW91187LF00
2
AXW91187LJ00
2
AXW91187RN00
FLEXIBLE HOSE B UNIT
AXW002E6XB00
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
AXW91187RP00
12
2
2
1
1
1
- 28 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
10.8.2 Replacemen4 Parts List : Packing of NA-F80H2 / NA-F90H2
Parts List
MODEL
REF.
NO.
1
PART NAME
PROTECTION CASE A
PART NO.
AXW90017LE00
SAFETY
F80H2 F90H2
COUNTRY / Q’TY
TH
VIET
SINMAL INDIA
DBD
SINRBD
PHI
UAEKUW OMAN QAT
AFP
BAR
LEB
UAEPGF
LIB
1
REMARK
1
AXW90017LE50
1
1
1
1
1
1
1
1
1
1
1
1
1
CORNER CUSHION (F-SIDE)
AXW90157JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 SET
CORNER CUSHION (B-SIDE)
AXW90157JP50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 SET
3
CORNER PAD
AXW90167JP00
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
PROTECTION CASE B UNIT
AXW090B7LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
POLYETHYLENE COVER
AXW90607JP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
OPERATING INSTRUCTION
AXW99017LE00
1
1
1
1
1
1
2
AXW99017LE50
1
AXW99017LEA0
1
AXW99017LEF0
1
1
1
1
1
1
1
7
SPIN TUB SUPPORTER
AXW90857LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
ACCESSORY BAG
AXW90576UP00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9
BODY COVER
AXW90047LE00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
STOCK CARD
AXW99187LE00
1
1
1
1
1
1
1
AXW99017LEK0
AXW99187LE50
1
AXW99187LG50
1
1
AXW99187LEA0
1
AXW99187LEF0
1
AXW99187LGK0
1
AXW99187LEP0
1
AXW99187LEU0
AXW99187LEX0
1
1
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
AXW99187LEZ0
11
CASE PLATE A
AXW91187LE00
2
FLEXIBLE HOSE B UNIT
AXW002E6XB00
2
2
2
AXW91187LG00
12
2
1
1
2
1
1
1
- 29 -
NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B
DETAIL CHANGE NOTICE
REVISION
ITEM NO.
PAGE
OCT. 2011
1
21
ADD. NEW PICTURE AT B22, C24
DETAIL
ADD. FLEXIBLE HOSE B UNIT, HOSE BAND
2
22, 23
ADD. PART NAME AND PART NO.
FOR FLEXIBLE HOSE B UNIT
3
24
ADD. NEW PICTURE AT C22-1
ADD. BALANCER UNIT
4
25, 26
ADD. PART NAME AND PART NO.
FOR BALANCER UNIT
- 30 -
REMARK