Download service manual colour television - Page de test
Transcript
AV29A10EUS SERVICE MANUAL COLOUR TELEVISION AV29A10EUS BASIC CHASSIS MF CONTENTS ! ! ! ! ! ! ! ! ! 1 SPECIFICATIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2 SAFETY PRECAUTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!! 4 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! 5 FEATURES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! FUNCTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! 6 SPECIFIC SERVICE INSTRUCTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! 8 SERVICE ADJUSTMENTS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!! 16 PARTS LIST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! 33 OPERATING INSTRUCTIONS STANDARD CIRCUIT DIAGRAM !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!! 2-1 COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. No.51818 Sept. 2001 AV29A10EUS SPECIFICATIONS Item CONTENTS Dimensions ( W" " H" "D ) 732mm"585mm"509mm Mass 46.0kg TV RF System CCIR B/G, I, D/K, L, L’ Colour System PAL / SECAM NTSC 3.58 / 4.43 (Play back only) Sound System A2 (B/G, D/K), NICAM (B/G, I, D/K, L) Teletext System Fastext(United Kingdom system), TOP(German system), WST(World standard system) Receiving Frequency VHF 47MHz# 470MHz UHF 470MHz!862MHz French CATV 116MHz!172MHz / 220MHz!469MHz Intermediate Frequency VIF Carrier 38.9MHz(B/G, D/K, I, L), 33.95MHz(L’) SIF Carrier 33.4MHz(5.5MHz : B/G) / 32.9MHz(6.0MHz : I) 32.4MHz(6.5MHz : D/K, L) / 40.45MHz(6.5MHz : L’) Colour Sub Carrier PAL SECAM NTSC 4.43MHz 4.40625MHz / 4.25MHz 3.58MHz / 4.43MHz Power Input AC 220V#240V , 50Hz Power Consumption 180W(Maximum), 152W(Average), 2.8W(Standby), 152W/h Picture Tube Visible size : 69.4cm, Measured diagonally High Voltage 31.0kV -1.5kV (at zero beam current) Speaker 4cm"16cm round"2 Audio Output Rated power output : 7.5W+7.5W +1kV Input / Output terminals EXT-1 21-pin Euro connector (SCART socket), Video, Audio L/R, RGB signal input are available TV broadcast output (Video and Audio L/R) are available EXT-2 21-pin Euro connector (SCART socket), S-Video, Video, Audio L/R, RGB signal input are available AV selector (TV LINK) function is available EXT-3 21-pin Euro connector (SCART socket), Video, Audio L/R, RGB signal input are available EXT-4 RCA pin type, S-Video, Video, Audio L/R signal input are available Audio output RCA pin type, Variable audio L/R and sub woofer output are available Aerial socket 75$unbalanced, Coaxial Headphone jack Stereo mini jack (%3.5mm ) Remote Control Unit RM-C54 (AAA/R03 dry cell battery"2) Design & specifications are subject to change without notice. 2 No.51818 AV29A10EUS & 21-pin Euro connector (SCART socket) : EXT-1 / EXT-2 / EXT-3 (P-P= Peak to Peak, S-W= Sync tip to white peak, B-W= Blanking to white peak) Pin Signal Designation Matching Value EXT-1 EXT-2 EXT-3 1 AUDIO R output 500mVrms(Nominal), Low impedance ' (TV OUT) ' (LINE OUT) NC 2 AUDIO R input 500mVrms(Nominal), High impedance ' ' ' 3 AUDIO L output 500mVrms(Nominal), Low impedance ' (TV OUT) ' (LINE OUT) NC 4 AUDIO GND ' ' ' 5 GND (B) ' ' ' 6 AUDIO L input 500mVrms(Nominal), High impedance ' ' ' 7 B input 700mVB-W , 75$ ' ' NC 8 FUNCTON SW (SLOW SW) Low : 0-3V, High : 8-12V, High impedance ' ' ' 9 GND (G) ' ' ' 10 SCL3 NC ' NC 11 G input ' ' NC 12 SDA3 NC ' NC 13 GND (R) ' ' ' 14 GND (YS) ' ' NC 15 R / C input R : 700mVB-W , 75$ C : 300mVP-P, 75$ ' (only R) ' ' (only C) 16 Ys input Low : 0 - 0.4, High : 1 - 3V, 75$ ' ' NC 17 GND(VIDEO output) ' ' ' 18 GND(VIDEO input) ' ' ' 19 VIDEO output 1VP-P(Negative going sync), 75$ ' (TV) ' (LINE OUT) NC 20 VIDEO / Y input 1VP-P(Negative going sync), 75$ ' (only VIDEO input) ' ' 21 COMMON GND ' ' ' 700mVB-W , 75$ [Pin assignment] No.51818 3 AV29A10EUS SAFETY PRECAUTIONS 1. The design of this product contains special hardware, many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits. Service should be performed by qualified personnel only. 2. Alterations of the design or circuitry of the products should not be made. Any design alterations or additions will void the manufacturer's warranty and will further relieve the manufacturer of responsibility for personal injury or property damage resulting therefrom. 3. Many electrical and mechanical parts in the products have special safety-related characteristics. These characteristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in the parts list of Service manual. Electrical components having such features are identified by shading on the schematics and by (! ! ) on the parts list in Service manual. The use of a substitute replacement which does not have the same safety characteristics as the recommended replacement part shown in the parts list of Service manual may cause shock, fire, or other hazards. 4. Don't short between the LIVE side ground and ISOLATED (NEUTRAL) side ground or EARTH side ground when repairing. Some model's power circuit is partly different in the GND. The difference of the GND is shown by the LIVE : (") side GND, the ISOLATED(NEUTRAL) : (#) side GND and EARTH : ($) side GND. Don't short between the LIVE side GND and ISOLATED(NEUTRAL) side GND or EARTH side GND and never measure with a measuring apparatus (oscilloscope etc.) the LIVE side GND and ISOLATED(NEUTRAL) side GND or EARTH side GND at the same time. If above note will not be kept, a fuse or any parts will be broken. 5. If any repair has been made to the chassis, it is recommended that the B1 setting should be checked or adjusted (See ADJUSTMENT OF B1 POWER SUPPLY). 9. Isolation Check (Safety for Electrical Shock Hazard) After re-assembling the product, always perform an isolation check on the exposed metal parts of the cabinet (antenna terminals, video/audio input and output terminals, Control knobs, metal cabinet, screwheads, earphone jack, control shafts, etc.) to be sure the product is safe to operate without danger of electrical shock. (1) Dielectric Strength Test The isolation between the AC primary circuit and all metal parts exposed to the user, particularly any exposed metal part having a return path to the chassis should withstand a voltage of 3000V AC (r.m.s.) for a period of one second. (. . . . Withstand a voltage of 1100V AC (r.m.s.) to an appliance rated up to 120V, and 3000V AC (r.m.s.) to an appliance rated 200V or more, for a period of one second.) This method of test requires a test equipment not generally found in the service trade. (2) Leakage Current Check Plug the AC line cord directly into the AC outlet (do not use a line isolation transformer during this check.). Using a "Leakage Current Tester", measure the leakage current from each exposed metal part of the cabinet, particularly any exposed metal part having a return path to the chassis, to a known good earth ground (water pipe, etc.). Any leakage current must not exceed 0.5mA AC (r.m.s.). However, in tropical area, this must not exceed 0.2mA AC (r.m.s.). " Alternate Check Method Plug the AC line cord directly into the AC outlet (do not use a line isolation transformer during this check.). Use an AC voltmeter having 1000 ohms per volt or more sensitivity in the following manner. Connect a 1500! 10W resistor paralleled by a 0.15"F AC-type capacitor between an exposed metal part and a known good earth ground (water pipe, etc.). Measure the AC voltage across the resistor with the AC voltmeter. Move the resistor connection to each exposed metal part, particularly any exposed metal part having a return path to the chassis, and measure the AC voltage across the resistor. Now, reverse the plug in the AC outlet and repeat each measurement. Any voltage measured must not exceed 0.75V AC (r.m.s.). This corresponds to 0.5mA AC (r.m.s.). However, in tropical area, this must not exceed 0.3V AC (r.m.s.). This corresponds to 0.2mA AC (r.m.s.). 6. The high voltage applied to the picture tube must conform with that specified in Service manual. Excessive high voltage can cause an increase in X-Ray emission, arcing and possible component damage, therefore operation under excessive high voltage conditions should be kept to a minimum, or should be prevented. If severe arcing occurs, remove the AC power immediately and determine the cause by visual inspection (incorrect installation, cracked or melted high voltage harness, poor soldering, etc.). To maintain the proper minimum level of soft X-Ray emission, components in the high voltage circuitry including the picture tube must be the exact replacements or alternatives approved by the manufacturer of the complete product. 7. Do not check high voltage by drawing an arc. Use a high voltage meter or a high voltage probe with a VTVM. Discharge the picture tube before attempting meter connection, by connecting a clip lead to the ground frame and connecting the other end of the lead through a 10k! 2W resistor to the anode button. 8. When service is required, observe the original lead dress. Extra precaution should be given to assure correct lead dress in the high voltage circuit area. Where a short circuit has occurred, those components that indicate evidence of overheating should be replaced. Always use the manufacturer's replacement components. 4 No.51818 AC VOLTMETER (HAVING 1000 !/V, OR MORE SENSITIVITY) 0.15"F AC-TYPE 1500 ! 10W GOOD EARTH GROUND PLACE THIS PROBE ON EACH EXPOSED METAL PART AV29A10EUS FEATURES " This TV model has 100Hz vertical scanning for the screen refreshing. And pure flat CRT reproduce fine textured. " Digi Pure pro : Auto digital pure with motion picture compensation. " Built in dual screen system, Picture and Text screen able to displayed. " The TELETEXT SYSTEM has a built-in FASTEXT (UK system), TOP (German system) and WST (world standard system) system. " Because this TV unit can receive the multiplex broadcast, users can enjoy music programs and sporting events with live realism. In addition, BILINGUAL programs can be heard in their original language. " Users can make VCR dubbing of picture and sound by controlling the AV selector to select an optional source at the EXT-2 output shown in figure bellow. TV EXT-1 EXT-3 EXT-4 EXT-2 No.51818 5 AV29A10EUS FUNCTIONS &FRONT CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 # EXIT-4 terminals $ Headphone jack (mini jack) ) button % Volume Set ( P buttons or Volume ( & '/( ) -/+ buttons ) Remote control sensor * ECO sensor + Hyper Sound lamp , ECO lamp - Sleep timer lamp . Power lamp / Main power button &REAR TERMINAL 2 3 1 5 ( EXT-1(IN/OUT) Terminal ) EXT-2(IN/OUT) Terminal * EXT-3(IN) Terminal + Audio out(L, R) Terminal , Aerial Socket 4 6 No.51818 11 AV29A10EUS &REMOTE CONTROL UNIT ( # Muting Key $ Number Key % Hyper sound Key & Zoom Key - ) * ) Information Key * TV Key + Stand-by Key + , 3 0 2 4 , Colour Key - Text Key . Menu / Ok Key 1 / Volume -/+ Key 0 Channel Up/Down Key 1 Pr(Program) Key Up/Down and Left/Right . / No.51818 7 AV29A10EUS SPECIFIC SERVICE INSTRUCTIONS DISASSEMBLY PROCEDURE REMOVING THE REAR COVER CHECKING THE PW BOARD 1. Unplug the power plug. To check the back side of the PW Board. 1) Pull out the chassis. (Refer to REMOVING THE CHASSIS). 2) Erect the chassis vertically so that you can easily check the back side of the PW Board. 2. As shown in the Fig. 1, remove the 14 screws marked A. 3. Withdraw the rear cover toward you. REMOVING THE CHASSIS " After removing the rear cover. 1. Slightly raise the both sides of the chassis by hand and remove the 2 claws under the both sides of the chassis from the front cabinet. 2. Withdraw the chassis backward. (If necessary, detach the wire clamp, connectors etc.) WIRE CLAMPING AND CABLE TYING REMOVING THE AV TERMINAL BOARD " After removing the rear cover. 1. As shown in Fig. 1, remove the 3 screws marked B. 2. As shown in Fig. 2, remove the 2 claws marked [CAUTION] " When erecting the chassis, be careful so that there will be no contacting with other PW Board. " Before turning on power, make sure that the wire connector is properly connected. " When conducting a check with power supplied, be sure to confirm that the CRT EARTH WIRE (BRAIDED ASS’Y) is connected to the CRT SOCKET PW board. E under the 1. Be sure to clamp the wire. 2. Never remove the cable tie used for tying the wires together. Should it be inadvertently removed, be sure to tie the wires with a new cable tie. CHASSIS. 3. As shown in Fig. 2, remove the AV TERMINAL BOARD slightly in the direction of the arrow F. REMOVING THE SPEAKER " After removing the rear cover and chassis. 1. As shown in the Fig. 1, remove the 2 screws marked D. NOTE : When removing the screws marked D of the speaker, remove the lower side screw first. Then remove the upper one. 2. Remove the 2 screws C attaching the speaker. 3. Follow the same steps when removing the other hand speaker. D AV SW PWB AV TERMINAL BOARD C C Fig. 2 8 No.51818 AV29A10EUS FRONT CABINET D C CRT SOCKET PWB SPEAKER FRONT CONTROL PWB MICOM PWB 100Hz PWB POWER & DEF PWB HVT CHASSIS AV TERMINAL BOARD D CONTROL BASE C B MAIN PWB AV SW PWB SPEAKER POWER CORD REAR COVER A No.51818 9 AV29A10EUS REMOVING THE CRT Replacement of the CRT should be performed by 2 or more persons. After removing the rear cover, chassis and anode wires etc. CRT CHANGE TABLE 1. Prepare the CRT change table, the CRT change table should also be covered with such soft cloth as shown in Fig.3. The CRT change table should preferably be smaller that the CRT surface, and its height be about 35cm. 2. While keeping the CRT down surface, mount the TV set on the CRT change table as shown in Fig.3. 3. Remove 4 screws marked by arrows with a box type screw driver as shown in Fig.4. 4. Since the cabinet will drop when screws have been removed, be sure to support the cabinet with hands. 5. After 4 screws have been removed, put the cabinet slowly on cloth. At this time, be carefully so as not to damage the front surface of the cabinet as shown in Fig.5. 6. The CRT should be assembled according to the opposite sequence of its disintegrated steps. APPROX. 35cm CLOTH Fig.3 [About CRT Spacer] An appropriate CRT spacer should be used in the corresponding CRT in accordance with the type of the CRT. When a CRT is replaced, special attention should be paid to this matter. Fig.4 CRT COATING OF SILICON GREASE FOR ELECTRICAL INSULATION ON THE CRT ANODE CAP SECTION. Subsequent to replacement of the CRT and HV transformer or repair of the anode cap, etc. by dismounting them, be sure to coat silicon grease for electrical insulation as shown in Fig.6. Wipe around the anode button with clean and dry cloth. (Fig.6) Coat silicon grease on the section around the anode button. At this time, take care so that any silicon greases dose not stick to the anode button. (Fig.7) Silicon grease product No. KS - 650N CRT CABINET Fig. 5 Approx. 20mm (Do not coat grease on this section Anode button Silicon grease coating CRT CHANGE TABLE Silicon grease should be coated by 5mm or more from the outside diameter of anode cap. Anode button (No sticking of silicon grease) Coating position of silicon grease Anode cap Fig. 6 10 Fig. 7 No. 51818 AV29A10EUS REPLACEMENT OF MEMORY ICs 1. Memory ICs This TV use memory ICs. In the memory ICs, there are memorized data for correctly operating the video and deflection circuits. When replacing memory ICs, be sure to use ICs written with the initial values of data. 2. Procedure for replacing memory ICs PROCEDURE (1) Power off Switch the power off and disconnect the power plug. (2) Fig.1 Replace ICs. Be sure to use memory ICs written with the initial data values. SYSTEM CONSTANT SET ** 1. DESTINATION (3) Power on Connect the power plug and switch the power on. + (4) Check and set SYSTEM CONSTANT SET It must not adjust without signal. OK : STORE i : EXIT Fig.2 1) Press the INFORMATION key and the MUTING key of the REMOTE CONTROL UNIT simultaneously. 2) The SERVICE MENU screen of Fig. 1 will be displayed. 3) While the SERVICE MENU is displayed, press the INFORMATION key and MUTING key simultaneously, and the SYSTEM CONSTANT SET screen of Fig. 2 will be displayed. 4) Check the setting values of the SYSTEM CONSTANT SET of Table 1. If the value is different, select the setting item with the FUNCTION UP/DOWN key, and set the correct value with the FUNCTION LEFT/RIGHT key. 5) Press the MENU(OK) key to memorize the setting value. 6) Press the INFORMATION key twice, and return to the normal screen. 2. CRT TYPE 3. PURITY 4. PICTURE TILT 5. DIGIPURE PRO 6. PIP 7. PIC & TEXT 8. DOLBY 9. BBE 10. PROGRESSIVE 11. TDA9178 12. TONE IC 13. FLAT 4:3 NO NO YES 1 TUNER NO NO YES YES YES NO YES REMOTE CONTROL UNIT KEY ASSIGNMENT MUTING (5) Setting of receive channels Set the receive channel. For setting, refer to the OPERATING INSTRUCTIONS. (6) Setting of SERVICE MENU Verify the setting items of the SERVICE MENU of Table 2, and reset where necessary. For setting, refer to the SERVICE ADJUSTMENTS. (7) User settings Check the user setting values of Table 3, and if setting value is different, set the correct value. For setting, refer to the OPERATING INSTRUCTIONS. No. 51818 INFORMATION MENU FUNCTION UP/DOWN FUNCTION LEFT/RIGHT 11 AV29A10EUS SETTING VALUES OF SYSTEM CONSTANT SET (TABLE 1) Setting item Setting content EK 1. DESTINATION 2. CRT TYPE 3. PURITY 4. PICTURE TILT 5. DIGIPURE PRO 7. PIC & TEXT 8. DOLBY 9. BBE 10. PROGRESSIVE 11. TDA9178 12. TONE IC 13. FLAT EU EI 16 : 9 4:3 YES NO YES NO YES NO 1 TUNER 6. PIP Setting Value 2 TUNER EU 4:3 NO NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO 1 TUNER NO NO YES YES YES NO YES SERVICE MENU SETTING ITEMS (TABLE 2) Setting item Setting value 1. IF 1. VCO 2. ATT ON/OFF [Do not adjust] 2. V / C 1. RGB BLK 2. WDR R 3. WDR G 4. WDR B 5. BRIGHT 6. CONTRAST 7. COLOUR 8. HUE 9. SHARP 10. VCO ADJUSTMENT 11. VIDEO AGC 12. SYNC SLICE 3. AUDIO (Do not adjust) 12 1. ERR LIMIT 2. A2 ID THR Setting item 4. DEF. 5. VSM PRESET COOL NORMAL WARM 6. STATUS (Do not adjust) No. 51818 Setting value 1. V-SHIFT 2. V-SIZE 3. H-CENT 4. H-SIZE 5. TRAPEZ 6. EW-PIN 7. COR-PIN 8. COR-UP 9. COR-LO 10. ANGLE 11. BOW 12. V-S.CR 13. V.LIN 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE 6. WDR R 7. WDR G 8. WDR B VPS PDC AV29A10EUS USER SETTING VALUES (TABLE 3) Setting item Setting value Setting item Setting value SUB POWER ON VOLUME 10 SHIPPING CHANNEL PR1 DISPLAY INDICATED PRESET CHANNEL See OPERATING INSTRUCTIONS. ZOOM MODE REGULAR PICTURE SETTING EXT SETTING TINT COOL ID BLANK CONTRAST CENTER DUBBING EXT-15EXT-2 BRIGHT CENTER SHARP CENTER COLOUR CENTER ECO MODE OFF PICTURE FEATURES FEATURES DIGITAL VNR AUTO SLEEP TIMER OFF DIGIPURE PRO AUTO BLUE BLACK ON COLOUR SYSTEM TV : According to preset CH CHILD LOCK ID : No.0000, All CH : OFF EXT : AUTO DECODER (EXT-2) All CH : OFF 4:3 AUTO ASPECT PANORAMIC SOUND SETTING INSTALL BASS CENTER LANGUAGE ENGLISH TREBLE CENTER EDIT PR CHANNEL ONLY BALANCE CENTER TV SPEAKER L/R HYPER SOUND OFF BBE ON OTHERS : BLANK DIGITAL SURROUND 3D PHONIC TV SPEAKER SUB WOOFER L/C/R OFF LEVEL CENTRE VOLUME CENTRE DOLBY DIGITAL TV SPEAKER REAR SPEAKER L/C/R ON SUB WOOFER OFF TEST TONE OFF LEFT MAX CENTRE MAX RIGHT MAX SURROUND MAX DELAY TIME 0 No. 51818 13 AV29A10EUS INITIAL SETTING VALUE OF SERVICE MENU 1. Adjustment of the SERVICE MENU is made on the basis of the initial setting values ; however, the new setting values which set the screen in its optimum condition may differ from the initial setting. 2. Do not change the initial Setting Values of the Setting (Adjustment) items not listed In “ADJUSTMENT”. 1.IF SETTING ITEM INITIAL SETTING VALUE 1.VCO Proper value by adjustment. See “adjustment of VCO” contents 2.ATT Do not adjust this item. is adjustment not to required 2.VIDEO / CHROMA Colour system Setting item Colour system Initial setting value PAL SECAM 1. RGB BLK NTSC Initial setting value Setting item PAL SECAM NTSC 7. COLOUR 000 000 000 020 2. WDR R 000 8. HUE 3. WDR G 000 9. SHARP 4. WDR B -012 10. VCO ADJUSTMENT 5. BRIGHT 000 11. VIDEO AGC 000 6. CONTRAST 000 12. SYNC SLICE +007 +007 Automatically optimized after adjustment 3.AUDIO (Do not adjust) Setting item 14 Variable range Initial setting value (Fixed value) 1. ERR LIMIT 00H#FFH 0AH 2. A2 ID THR 00H#FFH 19H No. 51818 AV29A10EUS is adjustment not to required 4.DEF INITIAL SETTING VALUE Setting item REGULAR ZOOM 16 : 9 100Hz i 60Hz p 100Hz i 60Hz p 100Hz i 120Hz i 1. V- SHIFT -2 +6 -1 0 0 0 2. V-SIZE -3 0 0 0 -15 0 3. H-CENT -21 +6 0 0 0 0 4. H-SIZE +7 -4 0 0 0 0 5. TRAPEZ -23 +11 -4 0 0 0 6. EW-PIN -35 -1 -2 0 0 0 7. COR-PIN 0 0 0 0 0 0 8. COR-UP +16 +7 +9 0 0 0 9. COR-LO +6 -1 -1 0 0 0 10. ANGLE 0 0 0 0 0 0 11. BOW 0 0 0 0 0 0 12. V-S.CR +6 0 0 0 0 0 13. V-LIN -6 +11 0 0 0 0 5.VSM PRESET VSM preset mode COOL NORMAL WARM +16 0 -15 2. BRIGHT -4 0 -2 3. SHARP -8 -8 -8 4. COLOUR +2 0 +1 0 0 0 6. WDR R -19 0 +5 7. WDR G -10 0 +1 8. WDR B 0 0 0 Setting item 1. CONT. 5. HUE No. 51818 15 AV29A10EUS SERVICE ADJUSTMENTS BEFORE STARTING SERVICE ADJUSTMENT 1. There are 2 ways of adjusting this TV: One is with the REMOTE CONTROL UNIT and the other is the conventional method using adjustment parts and components. 2. The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The setting values which adjust the screen to the optimum condition can be different from the initial setting values. 3. Make sure that connection is correctly made to AC power source. 4. Turn on the power of the TV and measuring instrument for warming up for at least 30 minutes before starting adjustment. 5. If the receive or input signal is not specified, use the most appropriate signal for adjustment. 6. Never touch parts (such as variable resistors, transformers and condensers) not shown in the adjustment items of this service adjustment. 7. Preparation for adjustment (presetting) Unless otherwise specified in the adjustment items, preset the following functions with the REMOTE CONTROL UNIT USER SETTING MENU PICTURE MODE (VSM) NORMAL TINT, CONTRAST, BRIGHT SHARP, COLOUR CENTER SLEEP TIMER OFF BALANCE CENTER ECO OFF ZOOM REGULAR MEASURING INSTRUMENT AND FIXTURES 1. 2. 3. 4. DC voltmeter (or digital voltmeter) Oscilloscope Signal generator (Pattern generator) [PAL / SECAM / NTSC] Remote control unit ADJUSTMENT ITEMS CHECKING ITEMS. ADJUSTMENT OF FOCUS AND SCREEN. 6 IF CIRCUIT CHECKING. 6 VSM PRESET SETTING. 6 VIDEO / CHROMA CIRCUIT ADJUSTMENT. 6 DEFLECTION CIRCUIT ADJUSTMENT. 6 AUDIO CIRCUIT ADJUSTMENT. (DO NOT ADJUST) 6 6 16 No. 51818 AV29A10EUS ADJUSTMENT LOCATIONS POWER FRONT CONTROL PWB HYPER SOUND TIMER ECO CH UP POWER SW FRONT CH DOWN MENU ECO SENSER (R) HEAD PHONE (L) VIDEO S-IN EXT- 4 CN002 PW W FUSE FRONT MAIN PWB POWER&DEF PWB CN002 W DEG L MICON PWB CN004 AV SW PWB CN007 CN001 CN005 1pin:B1(TP-91) 2pin:NC 3pin:X-RAY 4pin:X-RAY 5pin:GND TUNER HV CN006 CN003 HVT 1 C2 CN013 5 CN014 X 100Hz PWB ANT-IN AUDIO OUT(L/R) EXT 1 2 3 IN-OUT IN TOP FOCUS 1 VR CRT SOCKET PWB (SOLDER SIDE) FOCUS 2 VR SCREEN VR E1 TP-47R TP-47G TP-47B TP-E VM CN014 CN013 CRT VM No. 51818 17 AV29A10EUS BASIC OPERATION SERVICE MENU 1. TOOL OF SERVICE MENU OPERATION Operate the SERVICE MENU with the REMOTE CONTROL UNIT. 2. SERVICE MENU ITEMS With the SERVICE MENU, various (adjustments): (1) 1. IF !!!!!!!!!!!!!!!!!!!!!!! (2) 2.V/C !!!!!!!!!!!!!!!!!!!!!! (3) 3.AUDIO !!!!!!!!!!!!!!!!!!! (4) 4.DEF !!!!!!!!!!!!!!!!!!!!! settings (adjustments) can be made, and they are broadly classified in the following items of settings This mode adjusts the setting This mode adjusts the setting This mode adjusts the setting This mode adjusts the setting ASPECT MODE values values values values of of of of the IF circuit. the VIDEO / CHROMA circuit. the multiplicity SOUND circuit. the DEFLECTION circuit for each aspect mode given below. Vertical frequency and Scan mode REGULAR 100Hz Interlace / 60Hz Progressive ZOOM 100Hz Interlace / 60Hz Progressive 16 : 9 100Hz Interlace / 60Hz Progressive (5) 5.VSM PRESET!!!!!!!!!!!!! This mode adjusts the initial setting values of COOL,NOMAL and WARM. (VSM : Video Status Memory) SERVICE MENU 3. BASIC OPERATION OF SERVICE MENU (1) How to enter SERVICE MENU Press the INFORMATION key and the MUTING key of the REMOTE CONTROL UNIT simultaneously (Fig.2), and the SERVICE MENU screen (Fig. 1) will be displayed. Fig.1 REMOTE CONTROL UNIT KEY ASSIGNMENT (2) Selection of SUB MENU SCREEN Press one of keys 1#5 of the REMOTE CONTROL UNIT and select the SUB MENU SCREEN (See Fig. 3), form the SERVICE MENU. MUTING SERVICE MENU 5 SUB MENU 1. IF 2. V / C 3. AUDIO 4. DEF. 5. VSM PRESET 6. STATUS 7. PIP 8. - - 9. SHIPPING (OFF) 0. BUS FREE MENU INFORMATION FUNCTION UP/DOWN Not to work FUNCTION LEFT / RIGHT Fig.2 18 No. 51818 AV29A10EUS SERVICE MENU SERVICE MENU 1. IF 3. AUDIO 5. VSM PRESET 7. PIP 9. SHIPPING(ON) 1-9 : SELECT 1-0 1. V-SHIFT 2. V-SIZE 3. H-CENT 4. H-SIZE 5. TRAPEZ 6. EW-PIN 7. COR-PIN 8. COR-UP 9. COR-LO 10. ANGLE 11. BOW 12. V-S.CR 13. V.LIN 2. V/C 4. DEF 6. STATUS 8. --0. BUS FREE i : EXIT SUB MENU 4. DEF SUB MENU 1.IF IF SERVICE MENU DEF **Hz ** FULL 1. VCO 2. ATT ON/OFF -/+ OK : STORE Do not select it. *** (**) 1. V-SHIFT i : EXIT 1-2 : SELECT i : EXIT SUB MENU 1.IF (VCO) VCO (CW) **. ** . ** MHz MAIN TOO HIGH ABOVE REF JUST REF BELOW REF TOO LOW i : EXIT COOL NORMAL WARM V/C VSM PRESET 1.CONT. 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE 6. WDR R 7. WDR G 8. WDR B SUB MENU 2. V/C SUB MENU 5. VSM PRESET -/+ OK : STORE PAL NORMAL *** i : EXIT **** 1. RGB. BLK -/+ OK : STORE i : EXIT 1. RGB BLK 2. WDR R 3. WDR G 4. WDR B 5. BRIGHT 6. CONTRAST 7. COLOUR 8. HUE 9. SHARP 10.VCO ADJUSTMENT 11. VIDEO AGC 12. SYNC SLICE SUB MENU 3. AUDIO (Do not adjust) AUDIO 1. ERR LIMIT 0AH C AD BITS = ******** -/+ OK : STORE i 1.ERR LIMIT 2. A2 ID THR : EXIT Fig.3 SUB MENU SCREEN No. 51818 19 AV29A10EUS (3) Setting methods " Method of Setting 1.IF as [VCO] : It must not adjust without signal. ( 1 Key!!!!!!!!!!!!!!!!!!!!!!!!! Select 1.IF. ) 1 Key !!!!!!!!!!!!!!!!!!!!!!!! Select 1. VCO (CW) Check the arrow position from the “ABOVE REF.” to “BELOW REF.” * INFORMATION Key !!!!!!!!!!!! Return to the SERVICE MENU screen. " Method of setting 2.V/C, 3.AUDIO, 4.DEF and 5.VSM PRESET. ( 2#5 Key!!!!!!!!!!!!!!!!!!!!!! Select one from 2. V/C, 3. AUDIO, 4. DEF and 5. VSM PRESET. ) FUNCTION UP/DOWN Key !!!!! Select setting items. * FUNCTION LEFT/RIGHT Key!!!! Set (adjust) the setting values of the setting items. + MENU (OK) Key !!!!!!!!!!!!!!! Memorize the setting value. (Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key if you do, the values will not be stored in memory.) , INFORMATION Key !!!!!!!!!!!! Return to the SERVICE MENU screen. " Do not adjust 6. STATUS, 7. PIP, 8. --- , 9. SHIPPING(ON) and 0. BUS FREE functions. (4) Release of SERVICE MENU 1) After completing the adjustment, return to the SERVICE MENU, then again press the INFORMATION (OK) key to return to the normal screen. 20 No. 51818 AV29A10EUS ADJUSTMENT CHECKING ITEM Item Measuring Test point Adjustment part Description instrument Check of B1 DC voltmeter TP-91(B1) 1.RGB BLK Power Supply TP-E(# #) Remote [X connector Control unit on POWER & DEF PWB] 1. 2. 3. 4. 5. Receive any broadcast. Press the ZOOM key and select the REGULAR mode. Select 2. V/C from the SERVICE MENU. Select 1. RGB BLK with FUNCTION UP / DOWN key. Press the FUNCTION RIGHT key to turn on the cutoff screen condition (all black screen). 6. Connect a DC voltmeter to TP-91(B1) and TP-E(#). 7. Make sure that the voltage is DC139.9 72.0V. 8. Press the FUNCTION LEFT key to return to service menu. Check of High High voltage CRT anode 1.RGB BLK Voltage meter Chassis GND 1. Receive any broadcast. 2. Press the ZOOM key and select the REGULAR mode. 3. Select 2. V/C from the SERVICE MENU. 4. Select 1. RGB BLK with FUNCTION UP / DOWN key. 5. Press the FUNCTION RIGHT key to turn on the cutoff screen condition (all black screen). 6. Connect a High voltage meter to CRT ANODE and chassis GND. +1kV 7. Make sure that the voltage is DC 31.0kV -1.5kV . Remote Control unit 8. Press the FUNCTION LEFT key to return to service menu. ADJUSTMENT OF FOCUS AND SCREEN Item Measuring Test point Adjustment part Description instrument Adjustment of FOCUS Signal generator FOCUS 1 VR FOCUS 2 VR [In HVT] 1. Receive a crosshatch signal. 2. By turning the FOCUS 2 VR, to make the vertical lines as fine and sharp as possible. 3. By turning the FOCUS 2 VR, adjust the picture so that the 6th vertical line from left side of the crosshatch picture becomes thinnest. 4. By turning the FOCUS 1 VR, adjust the 4th horizontal line from the upper side may become uniform at the line center and its periphery. 5. Carry out adjustment by repeating the steps 3 and 4 about. 6. Make sure that when the screen is darkened, the lines remain in good focus. FOCUS 2 VR FOCUS 1 VR FOCUS 1 VR FOCUS 2 VR SCREEN VR Adjustment point No. 51818 21 AV29A10EUS Item Measuring Test point Adjustment part Description instrument Adjustment of SCREEN VR 1. Input the whole black signal. SCREEN VR (Within FBT) Signal generator 2. Press the ZOOM key and select the REGULAR mode. 3. Select 2. V/C from the SERVICE MENU. Remote control unit 4. Turn the SCREEN VR clockwise from the full counterclockwise position, and stop it at the point where “CLOW” status (marked in figure) changes from “1” 5 “0” 5 “1” (which is indicated at the 3rd column from the right). 5. Then turn the SCREEN VR to the counterclockwise, and stop V/C PAL 00 1. RGB BLK -/+ where “CLOW” status change “1” 5 “0”. OK : STORE i : EXIT 00000100 CLOW status Screen VR adjustment IF CIRCUIT CHECKING Item Measuring Test point Adjustment part Description instrument Checking of VCO Remote control unit " Under normal conditions, no adjustment is required. Confirmation adjustment. 1.VCO 1. 2. 3. 4. IF MENU SCREEN IF SERVICE MENU 1. VCO 2. ATT ON/OFF 1-2 : SELECT Do not select this mode i : EXIT IF MENU SCREEN VCO(CW) ****MHz MAIN TOO HIGH ABOVE REF JUST REF BELOW REF TOO LOW i : EXIT 22 No. 51818 Select 1.IF from the SERVICE MENU. Then select 1.VCO from the IF SERVICE MENU. Receive any broadcast. In the VCO adjustment screen, the yellow allows point to the characters. Check the allow position where pointed to the character from “ABOVE REF” to “BELLOW REF”. AV29A10EUS VSM PRESET SETTING Item Measuring Test point Adjustment part Description instrument Setting of VSM PRESET 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE 6. WDR R 7. WDR G 8. WDR B Remote control unit 1. Press the MENU key and select COOL mode with the remote control unit. 2. Select 5.VSM PRESET from the SERVICE MENU. 3. Adjust the FUNCTION UP/DOWN and LEFT/RIGHT key to bring the set values of 1.CONT # 8. WDR B to the values shown in the table. 4. Press the MENU key and memorize the set value. 5. Respectively select the VSM PRESET mode for NORMAL and WARM, and make similar adjustment as in 3 above. 6. Press the MENU key and memorize the set value. 8 Refer to OPERATING INSTRUCTIONS for the PICTURE MODE. VIDEO/CHROMA CIRCUIT ADJUSTMENT " The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. " The setting values which adjust the screen to the optimum condition can be different from the initial setting values. Item Measuring instrument Test point Adjustment part Description 2.WDR R 3.WDR G " Set the PICTURE MODE to NORMAL. Remote control unit 5.BRIGHT 1. Receive any broadcast. 2. Select 2.V/C from the SERVICE MENU. 3. Select 5.BRIGHT with the FUNCTION UP/DOWN key. 4. Set the initial setting value with the FUNCTION LEFT/RIGHT key. 5. If the brightness is not the best with the initial setting value, make fine adjustment until you get the best brightness. 6. Press the MENU key and memorize the set value. Remote control unit 6.CONTRAST 1. Receive any broadcast. 2. Select 2.V/C from the SERVICE MENU. 3. Select 6.CONTRAST with the FUNCTION UP/DOWN key. 4. Set the initial setting value with the FUNCTION LEFT/RIGHT key. 5. If the contrast is not the best with the initial setting value, make fine adjustment until you get the best contrast. 6. Press the MENU key and memorize the set value. Adjustment of WHITE BALANCE (High-Light) Signal generator Adjustment of SUB BRIGHT Adjustment of SUB CONTRAST 1. Receive a black and white signal (colour off). 2. Select 2. V/C from the SERVICE MENU. 3. Modify 2. WDR R and 3.WDR G data to adjust the white balance ( high light ). 4. Press the MENU key and memorize the set value. 5. Change the contrast and brightness up and down with the remote control unit from Low–light to High–light, and check that the tracking of the white balance is good. Remote control unit No. 51818 23 AV29A10EUS Item Adjustment of SUB COLOUR! ! Measuring Test point instrument Remote control unit Adjustment part Description 7.COLOUR (PAL/SECAM/NTSC) [Method of adjustment without measuring instrument] PAL COLOUR 1. 2. 3. 4. SECAM COLOUR 1. Receive a SECAM broadcast. 2. Make fine adjustment of SECAM COLOUR in the same manner as for above. NTSC COLOUR (NTSC 3.58 COLOUR) Receive PAL broadcast. Select 2.V/C from the SERVICE MENU. Select 7.COLOUR with the FUNCTION UP/DOWN key. Set the initial setting value for PAL COLOUR with the FUNCTION LEFT/RIGHT key. 5. If the colour is not the best with the initial set value, make fine adjustment until you get the best colour. 6. Press the MENU key and memorize the set value. 1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the EXT terminal. 2. Make similar fine adjustment of NTSC 3.58 COLOUR in the same manner as for above. (NTSC 4.43 COLOUR) 1. Input a NTSC 4.43MHz COMPOSITE VIDEO signal from the EXT terminal. 2. Make similar fine adjustment of 4.43 COLOUR in the same manner as for above. PIP MENU ( OK ) key FUNCTION UP/DOWN and LEFT/RIGHT key i ( INFORMATION ) key 24 No. 51818 AV29A10EUS Measuring Item instrument Adjustment of SUB COLOUR " Test point Signal generator TP-47B TP-E(# #) [CRT Oscilloscope SOCKET PWB ] Adjustment part Description 7.COLOUR (PAL/SECAM/NTSC) [Method of adjustment using measuring instrument] PAL COLOUR 1. 2. 3. 4. Remote control unit Receive a PAL full field colour bar signal (75% white). Select 2.V/C from the SERVICE MENU. Select 7.COLOUR with the FUNCTION UP/DOWN key. Set the initial setting value of PAL COLOUR with the FUNCTION LEFT/RIGHT key. 5. Connect the oscilloscope between TP-47B and TP-E 6. Adjust PAL COLOUR and bring the value of (A) in the illustration to –8V (voltage difference between white (w) and blue (B)). 7. Press the MENU key and memorize the setting value. (A) (-) W Cy Mg B 0 (+) SECAM COLOUR 1. Receive a SECAM full field colour bar signal (75% white). 2. Set the initial setting value of SECAM COLOUR with the FUNCTION LEFT/RIGHT key. 3. Adjust SECAM COLOUR and bring the value of (A) of the illustration to –6V (W#B). 4. Press the MENU key and memorize the setting value. NTSC COLOUR (NTSC 3.58 COLOUR) 1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal (full field colour bar with 75% white) from the EXT terminal. 2. Set the initial setting value of NTSC 3.58 COLOUR with the FUNCTION LEFT/RIGHT key. 3. Adjust NTSC 3.58 COLOUR and bring the value of (A) of the illustration to 0V (W#B). 4. Press the MENU key and memorize the setting value. (NTSC 4.43 COLOUR) 1.When NTSC3.58 adjustment has done, then NTSC4.43 adjustment will be automatically set at the respective values. No. 51818 25 AV29A10EUS Measuring Item Adjustment of SUB HUE! ! Adjustment of SUB HUE" " instrument Test point Remote control unit Signal generator TP-47B TP-E(# #) [CRT Oscilloscope SOCKET PWB] Adjustment part 8.HUE [Method of adjustment without measuring instrument] NTSC 3.58 HUE 1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal (full field colour bar with 75% white) from the EXT terminal. 2. Select 2.V/C from the SERVICE MENU. 3. Select 8.HUE with the FUNCTION UP/DOWN key. 4. Set the initial setting value of NTSC 3.58 HUE with the FUNCTION LEFT/RIGHT key. 5. If you cannot get the best hue with the initial setting value, make fine adjustment until you get the best hue. 6. Press the MENU key and memorize the set value. NTSC 4.43 HUE 1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values. 8.HUE [Method of adjustment using measuring instrument] NTSC 3.58 HUE 1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal (full field colour bar with 75% white) from the EXT terminal. 2. Select 2.V/C from the SERVICE MENU. 3. Select 8.HUE with the FUNCTION UP/DOWN key. 4. Set the initial setting value of NTSC 3.58 HUE with the FUNCTION LEFT/RIGHT key. 5. Connect the oscilloscope between TP-47B and TP-E 6. Adjust NTSC 3.58 HUE to bring the value of (B) in the illustration to –15V (voltage difference between white (W) and magenta (Mg)). 7. Press the MENU key and memorize the setting value Remote control unit (B) W Cy Mg B Description (-) 0 (+) NTSC 4.43 HUE 26 1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values. No. 51818 AV29A10EUS Item Adjustment of VCO for colour decoder Measuring instrument Test point Signal generator Adjustment part Description 1. Input a PAL full field colour bar signal (75% white) from the EXT terminal. 2. Select 2. V/C from the SERVICE MENU. 3. Select 10. VCO adjustment with the FUNCTION UP/DOWN key. 4. Press the OK key then automatically optimized. 10. VCO Remote control unit DEFLECTION CIRCUIT ADJUSTMENT There are 3 aspect modes ( ( REGULAR, ) ZOOM, * 16 : 9 ) of the adjustment ( 1 ) 100Hz i mode, ( 2 ) 60Hz p and ( 3 ) 120Hz i mode!!!!! !!!!!! !!!!!! depending upon the kind of signals ( vertical frequency 100Hz i / 60HZ p / 120Hz i ). Character “i” is an omission of “inter lace scan”, and character “p” is an omission of “progressive scan”. " When the 100Hz REGULAR mode has been established, the setting of other modes will be done automatically. However, if the picture quality has not been optimized, adjust each mode again, respectively. " The adjustment using the remote control unit is made on the basis of the initial setting values. " The setting values which adjust the screen to the optimum condition can be different from the initial setting values. Item Adjustment of V-SHIFT Measuring instrument Signal generator Test point Adjustment part 1.V- SHIFT Remote control unit Description " 1. 2. 3. 4. 5. Set the ASPECT MODE to REGULAR. Receive a circle pattern signal of vertical frequency 50Hz. Select 4.DEF from the SERVICE MENU. Select 1.V-SHIFT with the FUNCTION UP/DOWN key. Adjust V-SHIFT to become A = B. Check the adjustment condition in other zoom mode. If it is a wrong condition, re-adjust in “FULL” mode with 1. V-SHIFT. 6. Press the MENU key and memorize the set value. A B No. 51818 27 AV29A10EUS Item Adjustment of V-SIZE Measuring instrument Test point Signal generator Adjustment part Description 7. Receive a crosshatch signal. 8. Select 2.V-SIZE and set the initial setting value. 9. Adjust V-SIZE to the vertical screen size of the picture becomes the value given table bellow. 10. Press the MENU key and memorize the set value. 11. Input a NTSC VIDEO signal (60Hz) from the EXT terminal, and make sure that the vertical screen size has been in the table below. 12. Press the MENU key and memorize the set value. 2.V-SIZE Remote control unit Screen size Picture size 100% Screen size Picture size 100% ASPECT REGULAR ZOOM 1 TOP 92% 80% BOTTOM 92% 80% SCREEN POSITION [ VERTICAL SCREEN SIZE ] Adjustment of H. CENTER Signal generator 3.H-CENT. Remote control unit C 28 13. 14. 15. 16. D No. 51818 Receive a circle pattern signal. Select 3.H-CENT and set the initial setting value. Adjust H-CENT to become C=D. Press the MENU key and memorize the set value. AV29A10EUS Measuring Item instrument Adjustment of H.SIZE Test point Signal generator Adjustment part 4.H-SIZE Remote control unit Description 17. Receive a crosshatch signal. 18. Select 4.H-SIZE and set the initial setting value. 19. Adjust H-SIZE and make sure that the horizontal screen size of the picture is in the table bellow. 20. Press the MENU key and memorize the set value. 21. Input the NTSC VIDEO signal (60Hz) from the EXT terminal, and make sure that the horizontal screen size is in the table bellow. 22. Press the MENU key and memorize the set value. ASPECT MODE REGULAR ZOOM 1 16 : 9 H SIZE 92% 85% 92% [ HORIZONTAL SCREEN SIZE ] Adjustment EW-PIN of Signal generator 6.EW-PIN 23. Select 6.EW-PIN and set the initial setting value 24. Adjust EW-PIN and make the 2nd.vertical lines at the left and right edges of the screen straight. Also make sure that the 3rd vertical lines are straight. 25. Press the MENU key and memorize the set value. 5.TRAPEZ 26. Receive a crosshatch signal. 27. Select 5.TRAPEZ with the FUNCTION UP/DOWN key. 28. Set the initial setting value of 5.TRAPEZ with the FUNCTION LEFT/RIGHT key. 29. Adjust TRAPEZ and bring the vertical lines at the right and left edges of the screen parallel. 30. Press the MENU key and memorize the set value. Remote control unit Straight Adjustment of TRAPEZ Signal generator Remote control unit Parallel No. 51818 29 AV29A10EUS Item Adjustment of CORNER UP/ LOW Measuring instrument Test point Signal generator 7.COR-PIN Remote control unit 9.COR-LO 8.COR-UP Straight Adjustment of ANGLE Adjustment part Straight 10.ANGLE Signal generator Description 31. Select 9.COR-LO with the FUNCTION UP/DOWN key. 32. Set the initial setting value of COR-LO with the FUNCTION LEFT/RIGHT key. 33. Adjust COR-LO, and bring the lines at the low corner straight. 34. Select 8.COR-UP with the FUNCTION UP/DOWN key. 35. Set the initial setting value of COR-UP with the FUNCTION LEFT/RIGHT key. 36. Adjust COR-UP, and bring the lines at the upper corner straight. 37. If the extreme upper & lower corners have pin or barrel condition a little chose 7.COR-PIN and adjust it to get the straight. 38. Press the MENU key and memorize the set value. " In case which there is a parallelogram distortion of images on the screen. 39. Select 10.ANGLE with the FUNCTION UP/DOWN key. Remote control unit 40. Adjust ANGLE, and bring the vertical lines straight. 41. Press the MENU key and memorize the set value. PARALLELOGRAM Adjustment of BOW 11.BOW Signal generator Remote control unit " In case where there is a bow-shaped distortion of images on the screen. 42. Select 11.BOW with the FUNCTION UP/DOWN key. 43. Adjust BOW, and bring the vertical lines straight. 44. Press the MENU key and memorize the set value. BOW 30 No. 51818 AV29A10EUS Item Adjustment of V-S.CR & V.LINE Measuring instrument Test point Signal generator Adjustment part 12.V-S.CR Description # 13.V.LIN. When the vertical linearity has been deteriorated remarkably, perform the following steps. 45. Receive a crosshatch signal. 46. Select 13. V.LIN with the FUNCTION UP / DOWN key. 47. Set the initial setting value of 13. V.LIN with the FUNCTION LEFT/RIGHT key. 48. Select 12. V-S.CR. with the FUNCTION UP / DOWN key. 49. Set the initial setting value of 12. V-S.CR. with the FUNCTION LEFT/RIGHT key. 50. Adjust 13. V.LIN and 12. V-S.CR. to the spaces of each lines at TOP, CENTER, and BOTTOM become uniform. Remote control unit TOP CENTER BOTTOM At first the adjustment in 100Hz REGULAR mode should be done, then the data for the other aspect mode is corrected in the respective value at the same time. And confirm the deflection adjustment initial setting value in 120Hz (NTSC EXT mode) REGULAR mode. If the adjustment in 100Hz each aspect mode has been done and stored, the data for the same aspect modes in 120Hz is corrected in the respective value. Only the data for the other aspect mode in 120Hz is corrected for itself. AUDIO CIRCUIT ADJUSTMENT Do not adjust 3. AUDIO adjustment of the SERVICE MENU as it requires no adjustment. If values had changed by some reason, set the initial setting values in the table given before page. No. 51818 31 AV29A10EUS REPLACEMENT OF CHIP COMPONENT ! CAUTIONS 1. 2. 3. 4. Avoid heating for more than 3 seconds. Do not rub the electrodes and the resist parts of the pattern. When removing a chip part, melt the solder adequately. Do not reuse a chip part after removing it. ! SOLDERING IRON 1. Use a high insulation soldering iron with a thin pointed end of it. 2. A 30w soldering iron is recommended for easily removing parts. ! REPLACEMENT STEPS 2. How to install Chip parts 1. How to remove Chip parts # Resistors, capacitors, etc (1) As shown in the figure, push the part with tweezers and alternately melt the solder at each end. # Resistors, capacitors, etc (1) Apply solder to the pattern as indicated in the figure. (2) Grasp the chip part with tweezers and place it on the solder. Then heat and melt the solder at both ends of the chip part. (2) Shift with tweezers and remove the chip part. # Transistors, diodes, variable resistors, etc (1) Apply solder to the pattern as indicated in the figure. (2) Grasp the chip part with tweezers and place it on the solder. # Transistors, diodes, variable resistors, etc (1) Apply extra solder to each lead. (3) First solder lead A as indicated in the figure. SOLDER SOLDER A (2) As shown in the figure, push the part with tweezers and alternately melt the solder at each lead. Shift and remove the chip part. B C (4) Then solder leads B and C. A B Note : After removing the part, remove remaining solder from the pattern. 32 No.51818 C AV29A10EUS PARTS LIST CAUTION ! The parts identified by the ! symbol are important for the safety. Whenever replacing these parts, be sure to use specified ones to secure the safety . ! The parts not indicated in this Parts List and those which are filled with lines !! in the Parts No. columns will not be supplied. ! P. W. Board Ass'y will not be supplied, but those which are filled with the Parts No. in the Parts No. columns will be supplied. ABBREVIATIONS OF RESISTORS, CAPACITORS AND TOLERANCES RESISTORS CAPACITORS CR Carbon Resistor C CAP. Ceramic Capacitor FR Fusible Resistor E CAP. Electrolytic Capacitor PR Plate Resistor M CAP. Mylar Capacitor VR Variable Resistor HV CAP. High Voltage Capacitor HV R High Voltage Resistor MF CAP. Metalized Film Capacitor MF R Metal Film Resistor MM CAP. Metalized Mylar Capacitor MG R Metal Glazed Resistor MP CAP. Metalized Polystyrol Capacitor MP R Metal Plate Resistor PP CAP. Polypropylene Capacitor OM R Metal Oxide Film Resistor PS CAP. Polystyrol Capacitor CMF R Coating Metal Film Resistor TF CAP. Thin Film Capacitor UNF R Non-Flammable Resistor MPP CAP. Metalized Polypropylene Capacitor CH V R Chip Variable Resistor TAN. CAP. Tantalum Capacitor CH MG R Chip Metal Glazed Resistor CH C CAP. Chip Ceramic Capacitor COMP. R Composition Resistor BP E CAP. Bi-Polar Electrolytic Capacitor LPTC R Linear Positive Temperature Coefficient Resistor CH AL E CAP. Chip Aluminum Electrolytic Capacitor CH AL BP CAP. Chip Aluminum Bi-Polar Capacitor CH TAN. E CAP. Chip Tantalum Electrolytic Capacitor CH AL BP E CAP. Chip Tantalum Bi-Polar Electrolytic Capacitor TOLERANCES F G J K M N "1% "2% "5% "10% "20% "30% No.51818 R H Z P +30% +50% +80% +100% -10% -10% -20% -0% 33 AV29A10EUS CONTENTS ! USING PW BOARD & REMOTE CONTROL UNIT ################################################################# 34 ! EXPLODED VIEW PARTS LIST############################################################################### 35, 36 ! EXPLODED VIEW ############################################################################################ 35, 37 ! PRINTED WIRING BOARD PARTS LIST AV29A10EUS " MAIN PW BOARD ASS'Y ###################################################################################### 38 " POWER & DEF. PW BOARD ASS' Y ########################################################################### 40 " CRT SOCKET PW BOARD ASS’Y ############################################################################# 42 " FRONT CONTROL PW BOARD ASS'Y######################################################################### 43 " MICON PW BOARD ASS'Y #################################################################################### 43 " AV SW PW BOARD ASS'Y ##################################################################################### 44 " 100Hz PW BOARD ASS'Y ##################################################################################### 45 ! REMOTE CONTROL UNIT PARTS LIST ######################################################################### 46 ! PACKING ####################################################################################################### 47 ! PACKING PARTS LIST ########################################################################################### 47 USING PW BOARD & REMOTE CONTROL UNIT Model PWB ASS'Y AV29A10EUS MAIN PWB SMF-1010A-U2 POWER & DEF. PWB SMF-2006A-U2 CRT SOCKET PWB SMF-3006A-U2 FRONT CONTROL PWB SMF-8009A-U2 MICON PWB SMF0M001A-U2 AV SW PWB SMF0S002A-U2 100Hz PWB SMF0Z004A-U2 REMOTE CONTROL UNIT 34 RM-C54-1C No.51818 AV29A10EUS EXPORTED VIEW PARTS LIST (1) ! !"#$%&$ '()*+%&$ '()*+%(," -"./)01*0&2 AV29A10EUS ++3 ! ++8 ! ++A ! 3;; 3;3 ! 3;8 ! 3;A ! 3;6 3;9 4567389:;3; @4A;A;A:;;3>:B @4A;A;6:;;3>:B @43;8H8:;88>:I @4A3N;N:;;8>:I @48;3;9:;83>:I QRD;;8;:;;3 @4A;A;8:;37>:I <=4+5>!? C$C$DE%-FD @$C$-$@C%G J!F%K+4>LE+>GGM 4F%K!F@+GBCCK 4F%K!F@+-FF! -FF!+@>K4B 'FDC!+?%FL >C5A36S:;;3:C G'!E%T OGC!=E4CP OGC!=E4CP EXPLODED VIEW (1) ! 3 1 ! 103 101 ! 102 ! ! 100 2 105 ! 104 No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o.51818 AV29A10EUS EXPLODED VIEW (2) ! 9 10 5 8 L01 ! 7 4 6 CRT SOCKET PWB ! 11 POWER & DEF. PWB MICON PWB 100Hz PWB 12 ! 14 FRONT CONTROL PWB 9 10 8 ! ! V01 ! T2551 15 ! 13 7 16 MAIN PWB ($3) AV SW PWB ! 11 ! ! 17 19 ! 18 ! 21 ! 22 ! 20 No.51818 23 37 AV29A10EUS AV29A10EUS PRINTED WIRING BOARD PARTS LIST %MAIN P.W. BOARD ASS’Y (SMF-1010A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! !3;;6:;9 !3;;7:;S !33;3 !33;8 !33;A !33;6 !33;9 !33;N %!G>NA<:3;3U %!G>NA<:;!;U %!G>NA<:3;8U %!G>NA<:373U %!G>NA<:888U %!G>NA<:3;8U %!G>NA<:373U %!G>NA<:8H;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;;!+3[3ND+++< ;$;!+3[3ND+++< 3\!+3[3ND+++< 37;!+3[3ND+++< 8$8\!+3[3ND+++< 3\!+3[3ND+++< 37;!+3[3ND+++< 8H!+3[3ND+++< !3938 !3983 !3988 !39S3 !39S8 !3N;3 !3N;8 !3N;A %!G>NA<:AA8U %!G>NA<:88AU %!G>NA<:9N8U %!G>NA<:9N3U %!G>NA<:AA8U %!G>NA<:8HAU %!G>NA<:3;AU %!G>NA<:8HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! A$A\!+3[3ND+++< 88\!+3[3ND+++< 9$N\!+3[3ND+++< 9N;!+3[3ND+++< A$A\!+3[3ND+++< 8H\!+3[3ND+++< 3;\!+3[3ND+++< 8H\!+3[3ND+++< !33;H !33;7 !33;S:33 !3393 !339A !339N !3397:9S !33N3 %!G>NA<:8H3U %!G>NA<:3;8U %!G>NA<:3;3U %!G>NA<:3;3U %!G>NA<:3;3U %!G>NA<:;!;U %!G>NA<:;!;U %!G>NA<:;!;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 8H;!+3[3ND+++< 3\!+3[3ND+++< 3;;!+3[3ND+++< 3;;!+3[3ND+++< 3;;!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< !3N;6 !3N;9 !3N;N !3N;S !3N3; !3N37 !3N3S !3N8; %!G>NA<:3;AU %!G>NA<:6HAU %!G>NA<:8HAU %!G>NA<:3;6U %!G>NA<:N78U %!G>NA<:AAAU %!G>NA<:3;6U %!G>NA<:9N8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;\!+3[3ND+++< 6H\!+3[3ND+++< 8H\!+3[3ND+++< 3;;\!+3[3ND+++< N$7\!+3[3ND+++< AA\!+3[3ND+++< 3;;\!+3[3ND+++< 9$N\!+3[3ND+++< !3A;3:;8 !3A;A !3A;6 !3A33 !3A38 !3A3A !3A36 !3A39:3H %!G>NA<:3;3U %!G>NA<:8HAU %!G>NA<:;!;U %!G>NA<:AA3U %!G>NA<:8HAU %!G>NA<:37AU %!G>NA<:883U %!G>NA<:3;3U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;;!+3[3ND+++< 8H\!+3[3ND+++< ;$;!+3[3ND+++< AA;!+3[3ND+++< 8H\!+3[3ND+++< 37\!+3[3ND+++< 88;!+3[3ND+++< 3;;!+3[3ND+++< !3NAH !3NAS !3N68:6A !3N66 !3N69:6N !3N6S !3N9;:93 !3N96:99 Q!?38N<:8!8U %!G>NA<:9N3U %!G>NA<:N73U %!G>NA<:3;6U %!G>NA<:;!;U Q!?38N<:8!8U %!G>NA<:3;AU %!G>NA<:;!;U 4+! 5T+! 5T+! 5T+! 5T+! 4+! 5T+! 5T+! 8$8!++3[8D+++< 9N;!+3[3ND+++< N7;!+3[3ND+++< 3;;\!+3[3ND+++< ;$;!+3[3ND+++< 8$8!++3[8D+++< 3;\!+3[3ND+++< ;$;!+3[3ND+++< !3A37 !3A3S !3A83:88 !36;3:;8 !36;A:;6 !36;9:;N !3693 !3696 %!G>NA<:9N8U %!G>NA<:37AU %!G>NA<:;!;U %!G>NA<:3;8U %!G>NA<:AA3U %!G>NA<:3;8U %!G>NA<:783U %!G>NA<:6H8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 9$N\!+3[3ND+++< 37\!+3[3ND+++< ;$;!+3[3ND+++< 3\!+3[3ND+++< AA;!+3[3ND+++< 3\!+3[3ND+++< 78;!+3[3ND+++< 6$H\!+3[3ND+++< !3NN6:N9 !3NNN !3NNH !3NN7 !3NNS !3NH;:H3 !3NH8 !3NHA %!G>NA<:3;AU %!G>NA<:6HAU %!G>NA<:37AU %!G>NA<:6HAU %!G>NA<:37AU %!G>NA<:3;6U %!G>NA<:88AU %!G>NA<:8HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;\!+3[3ND+++< 6H\!+3[3ND+++< 37\!+3[3ND+++< 6H\!+3[3ND+++< 37\!+3[3ND+++< 3;;\!+3[3ND+++< 88\!+3[3ND+++< 8H\!+3[3ND+++< !3699:9N !369H !3697 !369S !36N3 !36N8 !36NA !36N9:NN %!G>NA<:38AU %!G>NA<:AS8U %!G>NA<:38AU %!G>NA<:6H8U %!G>NA<:38AU %!G>NA<:39AU %!G>NA<:N7AU %!G>NA<:886U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 38\!+3[3ND+++< A$S\!+3[3ND+++< 38\!+3[3ND+++< 6$H\!+3[3ND+++< 38\!+3[3ND+++< 39\!+3[3ND+++< N7\!+3[3ND+++< 88;\!+3[3ND+++< !3NH9 !3NHH:H7 !3NHS !3N7; !3N76 !3N7H !3H;3:;8 !3H;A:;6 %!G>NA<:3;AU %!G>NA<:3;AU %!G>NA<:88AU %!G>NA<:8HAU %!G>NA<:;!;U %!G>NA<:;!;U %!G>NA<:3;AU %!G>NA<:3;8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;\!+3[3ND+++< 3;\!+3[3ND+++< 88\!+3[3ND+++< 8H\!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< 3;\!+3[3ND+++< 3\!+3[3ND+++< !36NH !36N7 !36NS !36H; !36H3 !36H8 !36HA !36H6 %!G>NA<:9NAU %!G>NA<:886U %!G>NA<:N7AU %!G>NA<:88AU %!G>NA<:8HAU %!G>NA<:N78U %!G>NA<:38AU %!G>NA<:9NAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 9N\!+3[3ND+++< 88;\!+3[3ND+++< N7\!+3[3ND+++< 88\!+3[3ND+++< 8H\!+3[3ND+++< N$7\!+3[3ND+++< 38\!+3[3ND+++< 9N\!+3[3ND+++< !3H;9:;7 !3H33:38 !3H36:39 !3H3N:3H !3H8;:88 !3HH8:HN !3S93 %!G>NA<:3;AU %!G>NA<:3;3U %!G>NA<:3;8U %!G>NA<:;!;U %!G>NA<:3;8U %!G>NA<:883U Q!?38N<:88;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 4+! 3;\!+3[3ND+++< 3;;!+3[3ND+++< 3\!+3[3ND+++< ;$;!+3[3ND+++< 3\!+3[3ND+++< 88;!+3[3ND+++< 88!++3[8D+++< !36H9 !36HN:H7 !36HS !367; !3673 !3678 !367A !3676 %!G>NA<:39AU %!G>NA<:38AU %!G>NA<:396U %!G>NA<:78AU %!G>NA<:6H8U %!G>NA<:8H8U %!G>NA<:6H8U %!G>NA<:6HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 39\!+3[3ND+++< 38\!+3[3ND+++< 39;\!+3[3ND+++< 78\!+3[3ND+++< 6$H\!+3[3ND+++< 8$H\!+3[3ND+++< 6$H\!+3[3ND+++< 6H\!+3[3ND+++< !3679 !367N !367H !367S !36S3 !36S8 !39;3 !39;6 %!G>NA<:38AU %!G>NA<:6H8U %!G>NA<:37AU %!G>NA<:AAAU %!G>NA<:AA8U %!G>NA<:9N8U %!G>NA<:;!;U %!G>NA<:3;8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 38\!+3[3ND+++< 6$H\!+3[3ND+++< 37\!+3[3ND+++< AA\!+3[3ND+++< A$A\!+3[3ND+++< 9$N\!+3[3ND+++< ;$;!+3[3ND+++< 3\!+3[3ND+++< !3933 %!G>NA<:398U 5T+! 3$9\!+3[3ND+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 38 43;;3 43;;8 43;;6 43;;9 43;;N 43;;H 43;;S 43;3; %4LA3B?:888U QCK%3B5:3;NR %4LA34?:3;6U QCK%345:3;7R %4LA3B?:3;AU QCK%3B5:3;NR %4LA34?:3;6U QCK%3B5:3;NR 4BE'+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ 4+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ +88;;1J+++9;=+++? +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? +3;;;"J+++3N=+++5 ;$;3"J+++9;=+++? +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? +++3;"J+++9;=+++5 433;3 433;8 433;A 433;6 433;9 433;N:;H 433;7 43333 %4LA34?:3;6U QCK%3B5:3;NR %4LA34?:3;6U QCK%345:3;HR QCK%3B5:3;NR %4LA34?:3;6U %-4A3B<:N7;U %-4A3B<:78;U 4BE'+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ ++;$3"J+++3N=+++? +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? ++3;;"J+++3N=+++5 +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? N71J+++9;=+++< 781J+++9;=+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 AV29A10EUS '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 43338:3A 43336 43339:3N 4333H:37 4333S:8; 43383 43388:8A 43386:89 %-4A3B<:6H;U %-4A3B<:37;U %4LA3B?:6H8U %4LA3B?:3;AU %-4A3B<:8!;U %4LA3B?:3;AU %-4A3B<:3;8U QCK%3B5:3;NR 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 6H1J+++9;=+++< 371J+++9;=+++< 6H;;1J+++9;=+++? ;$;3"J+++9;=+++? 8$;1J+++9;=+++< ;$;3"J+++9;=+++? 3;;;1J++9;=+++< +++3;"J+++9;=+++5 4338N 4338H 43387 4338S 433A; 43393:96 43399:9N 43A;3 %4LA34?:3;6U QCK%3B5:3;NR %4LA34?:3;6U %4JA3>R:3;9U QCK%3B5:3;NR %4JA3>R:3;9U %-4A3B<:3;8U QCK%345:3;HR 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ 4+4>'$ 4+4>'$ C+4>'$ ++;$3"J+++3N=+++? +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? 3"J++3;=+++R +++3;"J+++9;=+++5 3"J++3;=+++R 3;;;1J++9;=+++< ++3;;"J+++3N=+++5 43A;8:;A 43A;9:;S 43A3; 43A33 43A38 43A3A:39 43A3N:37 43A8; %4LA34?:3;6U %4LA34?:3;6U QCK%3>5:887R %4LA34?:N7AU %-4A3B<:883U %4LA3B?:88AU %4LA3B?:3;AU QCK%;<5:887R 4BE'+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ ++;$3"J+++3N=+++? ++;$3"J+++3N=+++? +88;;"J+++3;=+++5 ;$;N7"J+++3N=+++? 88;1J+++9;=+++< ;$;88"J+++9;=+++? ;$;3"J+++9;=+++? +88;;"J++N$A=+++5 43A83:8A 43A86 43A93 436;3 436;8 436;A:;6 4369A 43696 %4LA3B?:88AU %-4A3B<:78;U QC%43C5:3;NR %4LA34?:3;6U QCK%345:3;HR %4LA34?:3;6U %4LA3B?:3;AU %4LA3C?:AAAU 4BE'+4>'$ 4+4>'$ L'+C+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ ;$;88"J+++9;=+++? 781J+++9;=+++< +++3;"J+++89=+++5 ++;$3"J+++3N=+++? ++3;;"J+++3N=+++5 ++;$3"J+++3N=+++? ;$;3"J+++9;=+++? ;$;AA"J+++89=+++? 43699:9N 4369H 436H3 436H8 436HA 436H6 436H9 436S3 %4LA34?:3;6U %4LA3C?:AAAU %4LA34?:3;6U %4LA3B?:3;AU %4LA34?:3;6U %4LA3C?:AAAU %4LA34?:3;6U %4LA3C?:6HAU 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ ++;$3"J+++3N=+++? ;$;AA"J+++89=+++? ++;$3"J+++3N=+++? ;$;3"J+++9;=+++? ++;$3"J+++3N=+++? ;$;AA"J+++89=+++? ++;$3"J+++3N=+++? ;$;6H"J+++89=+++? 439;3:;8 43983 439N6 439S3 43N;N:;H 43N3N 43N37 43N87 %-4A3B<:39;U %4LA3B?:3;AU %4LA34?:3;6U %-4A3B<:6H3U QCK%345:88HR QCK%3B5:3;9R QCK%3B5:3;9R QCK%3B5:3;HR 4+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ C+4>'$ C+4>'$ C+4>'$ 391J+++9;=+++< ;$;3"J+++9;=+++? ++;$3"J+++3N=+++? 6H;1J++9;=+++< ++88;"J+++3N=+++5 ++++3"J+++9;=+++5 ++++3"J+++9;=+++5 ++3;;"J+++9;=+++5 43N8S 43NA; 43NA8 43NA6 43N63:68 43N6N:6H 43N67:6S 43NHA:H6 QCK%3B5:3;NR %4J83BR:886U %4J83BR:886U QCK53B5:887 %4J83BR:886U %4LA3B?:3;AU QCK53=5:3;7 %4JA3>R:3;9U C+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 4+4>'$ +++3;"J+++9;=+++5 ;$88"J+++9;=+++R ;$88"J+++9;=+++R +88;;"J+++9;=+++5 ;$88"J+++9;=+++R ;$;3"J+++9;=+++? +3;;;"J+++A9=+++5 3"J++3;=+++R 43NH9 43NHN:HH 43NH7:HS 43N7; 43N73 43N78 43N7A 43N76 QCK%3C5:6HNR %-4A3B<:393U %-4A3B<:39;U %4JA3>R:3;9U %4LA3B?:AA8U %4LA3C?:AAAU QCK%3C5:6HNR %4LA3B?:AA8U C+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4BE'+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ +++6H"J+++89=+++5 39;1J+++9;=+++< 391J+++9;=+++< 3"J++3;=+++R +AA;;1J+++9;=+++? ;$;AA"J+++89=+++? +++6H"J+++89=+++5 +AA;;1J+++9;=+++? 43N79 43N7N 43N7H 43N77 43N7S 43NS9 43NS7 43NSS %4LA3C?:AAAU %4JA3>R:3;9U QCK%3B5:3;NR QCK%3C5:6HNR %4LA34?:3;6U %!G>NA<:;!;U %!G>NA<:;!;U %4LA3B?:3;AU 4BE'+4>'$ 4+4>'$ C+4>'$ C+4>'$ 4BE'+4>'$ 5T+! 5T+! 4+4>'$ ;$;AA"J+++89=+++? 3"J++3;=+++R +++3;"J+++9;=+++5 +++6H"J+++89=+++5 ++;$3"J+++3N=+++? ;$;!+3[3ND+++< ;$;!+3[3ND+++< ;$;3"J+++9;=+++? '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 43H;3 43H;8 43S93 43S98:9A 43S96 43S99 43S9N QCK%3B5:3;NR %4LA34?:9NAU QCK%345:6HHR %4LA34?:3;6U QCK%3>5:6HHR QCK%3>5:88HR QCK%3>5:3;HR C+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ C+4>'$ C+4>'$ +++3;"J+++9;=+++5 ;$;9N"J+++3N=+++? ++6H;"J+++3N=+++5 ++;$3"J+++3N=+++? ++6H;"J+++3;=+++5 ++88;"J+++3;=+++5 ++3;;"J+++3;=+++5 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @3;;3 @3;;8:;A @3;;6 @33;3 @33;8 @3333 @3338 @3A;3:;8 QQ@866?:8H;R QQ@866?:3;;R %Q@;S8?:3;;U Q!%36A<:;!;U QQ@866?:6!HR QQ@866?:88;R QQ@866?:37;R %Q@;S8?:3!9U 'C>?E%T+4FE@ 4FE@ E%-I4KF! 4+! 4FE@ 'C>?E%T+4FE@ 4FE@ E%-I4KF! @3S93 QQ@8N>5:9!NR 4BF?C+4FE@ 3;"B+++? ;$;!++3[6D+++< 6$H"B+++? 37"B+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C -3A3H:37 -36H3:H6 -3983 -39S3 -39S8 -3N;8 -3N3;:33 -3N36:39 5>333:U 5>333:U 5>333:U 5>333:U 5>A;93[5[:U 5>333:U 5>333:U 5>333:U GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C GE$-EF-C -3N3H -3N3S:8; -3HH3:H6 -3S93 -3S73:78 5>333:U 5>AAA;[@[:U 5>A;9N[5[:U 3G!A9:6;;>:K9 5>333:U GE$-EF-C RC%C!+-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! Q33;3:;8 Q36H3:H8 Q3N;3:;8 Q3N;6:;9 Q3N;N Q3N;H Q3N39 Q3N3N:3H 8G48638?[Q![:U 8G48638?[Q![:U 8G>3;AH>?[Q![:U -K4386C?>:U 8G48638?[Q![:U -K>386C?>:U 8G>3;AH>?[Q![:U -K4A8AK?:U GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! -ETE$K!>%GEGKF! GE$K!>%GEGKF! -ETE$K!>%GEGKF! GE$K!>%GEGKF! -ETE$K!>%GEGKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E433;3 E43A;3 E436;8 E436H3 E43N;3 E43NN8 E43NNA E43H;3 5G'A639-QTLATBU G->SA7; L>3;A86>J:UC I'4A97T8:UC K>786N>B L>6997J:U %<5839;>5:U <@439N8LJ:U E$4$O5F%F:>%>P E$4$O5P E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$OBML!E-P E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$O-ETE:5FGP E43S93 E43S98 L>;SK L>;7K E$4$O5F%F:>%>P E$4$O5F%F:>%>P ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ <3;;3 ?3;;3 ?33;3:;8 ?3A;3 ?3N;3:;8 @433;8 @43A;3:;A KI3;;3 Q%%;8SN:;;3 %Q!;A7S:;;AU %Q!;A7S:;;AU %Q!;63A:;;AU 4C68N73:;;3M %Q!;6A3:;;3U %Q!;6A3:;;3U Q>I;377:;;A 'E%+<>4? JC!!EKC+LC>-G JC!!EKC+LC>-G LC>-G+4F!C LC>-G+4F!C C5E+JE@KC! C5E+JE@KC! KI%C! U33;3 U39;3 M3N38:3A 4C6896N:;;3R Q>U;96S:;;3R %4J834R:3;9U 4!MGK>@ 4!MGK>@ 4+4>'$ 3"J+++3N=+++R ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 39 AV29A10EUS % POWER & DEF. P.W. BOARD ASS’Y (SMF-2006A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! !86;3:;8 !86;A !86;6 !86;9 !86;N !86;H !86;7 !86;S Q!C363<:9N8M Q!C363<:888M Q!U;3T<:3!; Q!@;8S<:883 Q!C363<:888M Q!U;3T<:3!; Q!U;3T<:3!8 Q!C363<:78AM 4+! 4+! 5J+! F5+! 4+! 5J+! 5J+! 4+! 9$N\!++3[6D+++< 8$8\!++3[6D+++< 3$;!++++3D+++< 88;!++++8D+++< 8$8\!++3[6D+++< 3$;!++++3D+++< 3$8!++++3D+++< 78\!++3[6D+++< !8S6A !8S66 !8S69 !8S6N !8S6S !8S9; !8S93 !8S98 Q!C363<:3;AM Q!C363<:3;AM Q!C363<:9NAM Q!C363<:3;AM Q!C363<:3;3M Q!C363<:3;AM Q!C383<:3;8M Q!@;AS<:88A 4+! 4+! 4+! 4+! 4+! 4+! 4+! F5+! 3;\!++3[6D+++< 3;\!++3[6D+++< 9N\!++3[6D+++< 3;\!++3[6D+++< 3;;!++3[6D+++< 3;\!++3[6D+++< 3\!++3[8D+++< 88\!++++AD+++< !863; !8683 !8688 !86N3 !86N8 !86NA !86N6 !86N7 Q!C363<:3;AM Q!C363<:3;AM Q!C363<:N76M Q!T;8S<:78; Q!C363<:6HAM Q!C363<:N78M Q!U;3T<:8!8 Q!C363<:3;8M 4+! 4+! 4+! F5+! 4+! 4+! 5J+! 4+! 3;\!++3[6D+++< 3;\!++3[6D+++< N7;\!++3[6D+++< +++78+!++++8D+++< 6H\!++3[6D+++< N$7\!++3[6D+++< 8$8!++++3D+++< 3\!++3[6D+++< !8S9A !8S96 !8SN; !8S73 !8S78 ! !8SS3 Q!C363<:6H6M Q!C363<:3;AM Q!C363<:3;AM Q!C363<:39AM Q!C363<:3;8M Q!R;;9H:789 4+! 4+! 4+! 4+! 4+! 4+! 6H;\!++3[6D+++< 3;\!++3[6D+++< 3;\!++3[6D+++< 39\!++3[6D+++< 3\!++3[6D+++< 7$85!+++3D+++< !86NS !86H3 !86H8 !86HA !86H6 !86H9 !86HN !86HH Q!C363<:8H8M Q!C363<:AS3M Q!>364J:3;;8M Q!C363<:6HAM Q!C363<:3;AM Q!C363<:3;8M Q!C363<:3;8M Q!C363<:9NAM 4+! 4+! 5J+! 4+! 4+! 4+! 4+! 4+! 8$H\!++3[6D+++< AS;!++3[6D+++< 3;\!++3[6D+++J 6H\!++3[6D+++< 3;\!++3[6D+++< 3\!++3[6D+++< 3\!++3[6D+++< 9N\!++3[6D+++< !86H7 !89;3 !89;8 !89;A !89;6 !89;9 !89;N !8983 Q!C363<:AAAM Q!C363<:6H3M Q!C363<:38AM Q!C383<:398M Q!@;AS<:6H8 Q!@;AS<:AA8 Q!C383<:9!NM Q!C383<:6H3M 4+! 4+! 4+! 4+! F5+! F5+! 4+! 4+! AA\!++3[6D+++< 6H;!++3[6D+++< 38\!++3[6D+++< 3$9\!++3[8D+++< 6$H\!++++AD+++< A$A\!++++AD+++< 9$N!++3[8D+++< 6H;!++3[8D+++< !8988 !898A !8986 !8963 !8968 !896A ! !8993 ! !8998 Q!C363<:88AM Q!C363<:3;AM Q!4383?:398R Q!C363<:378M Q!C363<:888M Q!C383<:8H8M Q!RS;88:!AA Q!RS;88:!AA 4+! 4+! 4F5'$! 4+! 4+! 4+! J+! J+! 88\!++3[6D+++< 3;\!++3[6D+++< ++3$9\!++3[8D+++? 3$7\!++3[6D+++< 8$8\!++3[6D+++< 8$H\!++3[8D+++< ;$AA!++++3D+++? ;$AA!++++3D+++? !89N3 !89N8 !89NA !8973 !8978 !897A !8976 !8979 Q!T;3T<:88; Q!C383<:38AM Q!R;;9N:3;AR Q!J396?:6!H Q!C363<:N73M Q!C383<:N78M Q!C363<:37AM Q!C363<:888M F5+! 4+! 4F5'+! I%J+! 4+! 4+! 4+! 4+! !897N !897H !8977 ! !89S3 !8S;3 !8S;8 !8S;A !8S;6 Q!>364J:H9;3M Q!>364J:86S3M Q!C363<:3;AM Q!RS;3H:6!H Q!C383<:AA3M Q!J;96?:A!A Q!J3;6?:A!S Q!@;AS<:N7A !8S;9:;N !8S;7:;S ! !8S3; !8S33 !8S36 !8S39 !8S3N ! !8SA8 !8SAA !8SA6 !8SA9 !8SAN !8SAH !8S63 !8S68 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 486;A 486;6 486;9 486;N 486;7 486;S:3; 48633 48636 QJ@48><:3;6R Q4R;38;:3;6R Q-4A3B<:78;R QCK53=5:3;7 QCK%3=5:3;HR QJ=H3B<:6H6R QJ@48><:3;6R Q4LA3B?:N78R 5+4>'$ 4+4>'$ 4+4>'$ C+4>'$ C+4>'$ 5J+4>'$ 5+4>'$ 4+4>'$ ;$3"J++3;;=+++< ;$3"J+++89=+++R 781J+++9;=+++< +3;;;"J+++A9=+++5 ++3;;"J+++A9=+++5 ;$6H"J+++9;=+++< ;$3"J++3;;=+++< N7;;1J+++9;=+++? 48639 48683 486N3 486N8:NA 486N6 486N9 486NN 486NH QCK%3=5:3;HR QCK%3B5:3;9R QCR;636:88N QJ5H8-<:398R Q4R;38;:3;6R QCK%3B5:3;NR QJ'A3B<:8H8R QJ@43B<:3;8R C+4>'$ C+4>'$ C+4>'$ 5+4>'$ 4+4>'$ C+4>'$ ''+4>'$ 5+4>'$ ++3;;"J+++A9=+++5 ++++3"J+++9;=+++5 88"J+++9;=+++5 39;;1J++8;;=+++< ;$3"J+++89=+++R +++3;"J+++9;=+++5 8H;;1J+++9;=+++< 3;;;1J+++9;=+++< 486N7 486H; 486H3 489;3 489;8 489;A ! 48983 ! 48988 QCK%3C5:6HNR Q4GA3B<:6H;R QJ@43B<:3;AR Q4LA8B?:AA3R QJ5H8-?:3;A QJ=H3B<:886R QJR;388:338 QJR;8;;:33A C+4>'$ 4+4>'$ 5+4>'$ 4+4>'$ 5+4>'$ 5J+4>'$ 5''+4>'$ 5''+4>'$ +++6H"J+++89=+++5 6H1J+++9;=+++< ;$;3"J+++9;=+++< AA;1J++9;;=+++? ;$;3"J++8;;=+++? ;$88"J+++9;=+++< 33;;1J3$7\=B"A] ;$;33"J3$9\=B"A] 88!++++3D+++< 38\!++3[8D+++< 3;\!+++3[8D+++? 6$H!+++39D+++? N7;!++3[6D+++< N$7\!++3[8D+++< 37\!++3[6D+++< 8$8\!++3[6D+++< 4898A ! 48986 4898N 4898H 48987 4898S 489A; 489A3 QJ5H8-?:ASA QJ'A8<<:37A QJR;3SH:336 QJR;3S6:396 QJR;3SH:N7A QJR;3S6:396 Q4LA8B?:9N3R QJR;3S6:9A6 5+4>'$ ''+4>'$ 5''+4>'$ 5''+4>'$ 5''+4>'$ 5''+4>'$ 4+4>'$ 5''+4>'$ ;$;AS"J++8;;=+++? ;$;37"J++NA;=+++< ;$33"J++89;=+++< ;$39"J++89;=+++< ;$;N7"J++89;=+++< ;$39"J++89;=+++< 9N;1J++9;;=+++? ;$9A"J++89;=+++< 5J+! 5J+! 4+! J+! 4+! I%J+! I%J+! F5+! H$9\!++3[6D+++J 8$6S\!++3[6D+++J 3;\!++3[6D+++< 6$H+!++3[6D+++< AA;!++3[8D+++< A$A!++++9D+++? A$S!+++3;D+++? N7\!++++AD+++< 489A8 48963 48993 48998 4899A 48996 48999 4899N QCK5845:88H QC%43B5:3;9R Q4LA8B?:398R QCK%345:3;7R Q4LA8B?:398R QCK%345:3;7R Q4LA8B?:3;8R QCK%8C5:3;NR C+4>'$ L'+C+4>'$ 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ ++88;"J++3N;=+++5 ++++3"J+++9;=+++5 39;;1J++9;;=+++? +3;;;"J+++3N=+++5 39;;1J++9;;=+++? +3;;;"J+++3N=+++5 3;;;1J++9;;=+++? +++3;"J++89;=+++5 Q!C383<:6H6M Q!@;AS<:78A Q!RS;3H:8!8 Q!C383<:398M Q!5;9S<:!3; Q!C383<:N73M Q!C383<:AA8M Q!RS;3H:6H; 4+! F5+! J+! 4+! 5'+! 4+! 4+! J+! 6H;\!++3[8D+++< 78\!++++AD+++< ++8$8+!++3[6D+++< 3$9\!++3[8D+++< ;$3;!+++9D+++< N7;!++3[8D+++< A$A\!++3[8D+++< 6H+!++3[6D+++< 48997 4899S 489N3 48973 48978 4897A 48976 ! 48S;3 QCK%345:6HHR QCB!345:88HR QJ@48><:AAAR QCK%345:3;HR QCK%3C5:6HNR QCK%8>5:3;NR QCK%3>5:88HR QJRS;H9:6HA C+4>'$ C+4>'$ 5+4>'$ C+4>'$ C+4>'$ C+4>'$ C+4>'$ 5''+4>'$ ++6H;"J+++3N=+++5 ++88;"J+++3N=+++5 ;$;AA"J++3;;=+++< ++3;;"J+++3N=+++5 +++6H"J+++89=+++5 +++3;"J++3;;=+++5 ++88;"J+++3;=+++5 ;$;6H"J>48H9=+++5 Q!C383<:8H8M Q!C383<:9N6M Q!C363<:6H8M Q!U;3T<:A!S Q!C383<:N73M Q!C383<:AA3M Q!C383<:6H3M 4+! 4+! 4+! 5J+! 4+! 4+! 4+! 8$H\!++3[8D+++< 9N;\!++3[8D+++< 6$H\!++3[6D+++< A$S!++++3D+++< N7;!++3[8D+++< AA;!++3[8D+++< 6H;!++3[8D+++< ! 48S;8 ! 48S;A 48S;6 48S;9 48S;N 48S;H 48S;7 48S;S QJRS;H9:3;6 QJRS;H9:6HA Q4RS;96:6H8 Q4RS;96:6H8 Q4RS;96:6H8 QCR;3SS:88H Q4LA8B?:3;A Q4R;A6;:AS3 5''+4>'$ 5''+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 4+4>'$ 4+4>'$ ;$3"J>48H9=+++5 ;$;6H"J>48H9=+++5 6H;;1J>489;=+++R 6H;;1J>489;=+++R 6H;;1J>489;=+++R 88;"J++6;;=+++5 ;$;3"J++9;;=+++? AS;1J++++8\=+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 AV29A10EUS '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C 48S3; 48S33 48S38 48S36 48S3N ! 48SA3 ! 48SA8 ! 48SAA QCK%3B5:6HNR Q4LA3B?:3;8R Q4R;A6;:9N3 Q4LA3B?:6H3R Q4LA8B?:398R Q4RS;96:6H8 Q4RS;96:6H8 Q4RS;96:6H8 C+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ +++6H"J+++9;=+++5 3;;;1J+++9;=+++? 9N;1J++++8\=+++? 6H;1J+++9;=+++? 39;;1J++9;;=+++? 6H;;1J>489;=+++R 6H;;1J>489;=+++R 6H;;1J>489;=+++R ! -8976 -8S;3 -8S;8 -8S;6 -8S;9 -8S;N -8S;H -8S;7 CI8:KA -AGLN; !T34:@J>3 >I;3R:K8 >I;3R:K8 5KR<8HL:K8 3GG3AA:K8 3GG3AA:K8 GE$-EF-C L!E-TC+-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C 48SA6 48SAN 48SAH 48SA7 48SAS 48S6; 48S63 48S68 QCK58T5:88N Q4R;A6;:393 QCK%3B5:6H9R Q4LA3B?:888R QJ@43B<:3;AR Q4LA3B?:6H3R QCK%3>5:3;7R QJ@43B<:3;8R C+4>'$ 4+4>'$ C+4>'$ 4+4>'$ 5+4>'$ 4+4>'$ C+4>'$ 5+4>'$ +++88"J++6;;=+++5 39;1J++++8\=+++? ++6$H"J+++9;=+++5 88;;1J+++9;=+++? ;$;3"J+++9;=+++< 6H;1J+++9;=+++? +3;;;"J+++3;=+++5 3;;;1J+++9;=+++< -8S3; -8S38 ! -8SA3 -8SAA -8SA6 -8SA9 -8S63 -8S6A 5KR<39L:K8 5KR<8HL:K8 G3DL[>[N;:63;3 >I;3R:K8 >I;3R:K8 3GG3AA:K8 !T'3;<:9;89:KA 5KR<H$9L:K8 RC%C!+-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C 48S93 48S98 48S96 48S9S 48SN; 48SNA 48SH8 48SH6:H9 QCR;8;A:88H QK553C5:887 QCK53=5:887 QJ=H3B<:N76R Q4R;3A3:783 Q4LA8B?:398R QCK%345:3;7R QCR;89N:387 C+4>'$ C+4>'$ C+4>'$ 5J+4>'$ 4+4>'$ 4+4>'$ C+4>'$ C+4>'$ 88;"J++3N;=+++5 88;;"J+++89=+++5 +88;;"J+++A9=+++5 ;$N7"J+++9;=+++< 78;1J+++8\=+++? 39;;1J++9;;=+++? +3;;;"J+++3N=+++5 38;;"J+++3;=+++5 -8S66 -8S69 -8S93 -8S98 -8S9A -8S96 -8S97 -8S9S:N; %<56A3@:K 3GG3AA:K8 !I6L:J3 J5U:T38G !I6L:J3 J5U:T38G 5KR<AAL:K8 !?A6:@J46 E$4$O5F%F:>%>P GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C GE$-EF-C 48SHN 48SH7:HS ! 48SS3 ! 48SSA QCK%345:3;7R QCR;89N:387 Q4RS;HS:888 Q4RS;HS:6H3 C+4>'$ C+4>'$ 4+4>'$ 4+4>'$ +3;;;"J+++3N=+++5 38;;"J+++3;=+++5 88;;1J>489;=+++5 6H;1J>489;=+++? -8SN3 -8S73 -8S76 -8S79 3G!A9:6;;>:K8 3GG3AA:K8 3GG3AA:K8 3GG3AA:K8 GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C +++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GJF!5C! K89;3 ! K8993 K89N3 ! K8S;3 ! K8SA3 QQ!3333:;;3 QQB;;S3:;;A:E8 QQ!3;SN:;;3 QQG;339:;;3 QQG;3;3:;;3 -!E=C+K!>%GJ$ B$=$K!>%GJ$ OGC!=E4CPD0*W+>%F-C+DE!C -CJ$K!>%GJ$ GDEK4B$K!>%GJ$ GDEK4B$K!>%GJ$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @86N3 @86N8 @8983 QQ!33S9:;;3 QQ@R;87:8H8 QQ@R;A3:37; 4BF?C+4FE@ 4BF?C+4FE@ 4BF?C+4FE@ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @8988 @8993 @8998 @89N3 @8S;3:;8 @8S;A @8S93 @8S96:99 QQ!33S3:;;8 QQ@R;8N:86; QQ@8N>?:88;R QQ@R;87:8H8 QQ@6;3?:3;;R QQ!38;;:;;3 QQ@R;8N:6N; QQ!338S:;;3 @E%C>!EKM+4FE@ BC>KC!+4BF?C 4FE@ 4BF?C+4FE@ 4BF?C+4FE@ 4BF?C+4FE@ BC>KC!+4BF?C 4BF?C+4FE@ @8S9H @8S97 @8S9S:N; QQ@R;8N:6N; QQ@R;8N:6N; QQ@8N>?:88;R BC>KC!+4BF?C BC>KC!+4BF?C 4FE@ 3G!A9:6;;>:K8 3GG3AA:K8 CI8:KA 3GG3AA:K8 3GG3AA:K8 3GG73:K9 =334>:43 J5=:AJI:J3 GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C -898A -8963 -8968 -8993 -8998 -899A -8978 -897A 5KR<88L:K8 CI8:KA 5KR<A$SL:K8 CI8:KA CI8:KA !B3G:KA 5KR<H$9L:K8 5KR<H$9G:K8 RC%C!+-EF-C GE$-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C RC%C!+-EF-C Q8683 Q8688 Q86N3 Q86N8:NA Q86N6 Q89;3 ! Q8983 Q8973 Q8978 Q897A Q8S63:68 -K4386CG>:K 8G43H6;G[Q![:K 8G?869S%:J96 8G43H6;G[Q![:K 8G>SAA>G[Q![:K LG%A;6:K 8G49998:!@ 8G>38;7[GK[R3:K -ETE$K!>%GEGKF! GE$K!>%GEGKF! J$C$K$ GE$K!>%GEGKF! GE$K!>%GEGKF! J$C$K$ GE$K!>%GEGKF! GE$K!>%GEGKF! -K4366CG>:K 8G43H6;G[Q![:K 8G43H6;G[Q![:K -ETE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! B$FIK ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E486;3 E486N3 E48993 E48S;3 E48SA3 E48S93 E48S96 E48S99 88"B+++? @>H7HN%R L>3;ASA L>38K GK!:JNNNHL[JH GK!:@6H8[JH GC36;% GE:7;9;G GE:7;AAG[J3 E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$OBML!E-P E$4$OBML!E-P E$4$OBML!E-P E$4$OBML!E-P E$4$OBML!E-P ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G 88"B+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C -86;8:;A -8683 -86N3 -86N8 -86NA -89;3 -8983 -8988 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! ! ! ! ! ! ! 4%8;;6:;N 4'8SA3 4'8S63 4'8S96 KB8S;3 !M8SA3 @J8S;3 ?86;3 ?8988:86 ?8S;3 ?8S98 ?8S9A ?8S96 ! '48S;3 ! '48SA3 QTL39;N53:3N Q5JR;6A:8!;R:<3 E4':%89:M E4':%H9:M Q>-;38;:S!; QG?;;SS:;;3 QQ!3;S9:;;3 QQ!;N83:;;8R 4F%%C4KF! JIGC E$4$'!FKC4K E$4$'!FKC4K '$KBC!5EGKF! !C@>M @E%C+JE@KC! LC>-G+4F!C 4C637A8:;;3 QQ!;NHS:;;3 QQ!;N83:;;8R QQ!;N83:;;8R QQ!;N83:;;8R '438AJM8 '438AJM8 @C>-+4F!C JC!!EKC+LC>-G LC>-G+4F!C LC>-G+4F!C LC>-G+4F!C E$4$O'B$4FI'@C!P E$4$O'B$4FI'@C!P 8$;> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 41 AV29A10EUS % CRT SOCKET P.W. BOARD ASS’Y (SMF-3006A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! !A3;3 !A3;8 !A3;A !A3;6 !A3;9 !A3;N !A3;H !A3;S %!G>NA<:88AU %!G>NA<:N73U %!G>NA<:3;3U %!G>NA<:788U %!G>NA<:3;8U %!G>NA<:883U %!G>NA<:9N3U %!G>NA<:39AU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 88\!+3[3ND+++< N7;!+3[3ND+++< 3;;!+3[3ND+++< 7$8\!+3[3ND+++< 3\!+3[3ND+++< 88;!+3[3ND+++< 9N;!+3[3ND+++< 39\!+3[3ND+++< !A33; !A333 !A338 !A33A !A336 !A339 !A33N !A33H %!G>NA<:888U %!G>NA<:378U %!G>NA<:8H8U %!G>NA<:AA3U %!G>NA<:398U %!G>NA<:78;U Q!T;3T<:3;3 %!G>NA<:883U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! F5+! 5T+! 8$8\!+3[3ND+++< 3$7\!+3[3ND+++< 8$H\!+3[3ND+++< AA;!+3[3ND+++< 3$9\!+3[3ND+++< 78!+3[3ND+++< 3;;!++++3D+++< 88;!+3[3ND+++< !A388 !A38A !A386 !A389 !A38N !A38H !A387 !A38S:A; %!G>NA<:388U Q!C383<:9NAM %!G>NA<:6H;U Q!C383<:9NAM %!G>NA<:6H;U %!G>NA<:388U %!G>NA<:AS;U Q!C383<:8!HM 5T+! 4+! 5T+! 4+! 5T+! 5T+! 5T+! 4+! 3$8\!+3[3ND+++< 9N\!++3[8D+++< 6H!+3[3ND+++< 9N\!++3[8D+++< 6H!+3[3ND+++< 3$8\!+3[3ND+++< AS!+3[3ND+++< 8$H!++3[8D+++< !A3A3 !A3A8 !A3AA ! !A3A6 !A8;6:;N !A833 !A88A:89 !A88H %!G>NA<:AS;U %!G>NA<:383U Q!@;8S<:AS3 Q!RS;83:9N3 %!G>NA<:8H8U %!G>NA<:396U %!G>NA<:8H8U %!G>NA<:3;AU 5T+! 5T+! F5+! J+! 5T+! 5T+! 5T+! 5T+! AS!+3[3ND+++< 38;!+3[3ND+++< AS;!++++8D+++< 9N;+!++++3D+++< 8$H\!+3[3ND+++< 39;\!+3[3ND+++< 8$H\!+3[3ND+++< 3;\!+3[3ND+++< !A887 !A88S:A3 !A8A8:A6 !A8A9:AH !A8AS !A863 !A868 !A866 %!G>NA<:8H8U Q!@;8S<:3;6 %!G>NA<:AA8U Q!4383?:398R Q!R;3;H:6H6R Q!R;3;H:3;9R %!G>NA<:3;AU %!G>NA<:3;8U 5T+! F5+! 5T+! 4F5'$! 4+! 4+! 5T+! 5T+! !A869:6H !AA;3:;8 !AA;A:;6 !AA;9 !AA;N !AA3; %!G>NA<:9N8U Q!C383<:6H6M %!G>NA<:88AU %!G>NA<:9N8U %!G>NA<:AS8U %!G>NA<:;!;U 5T+! 4+! 5T+! 5T+! 5T+! 5T+! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @A3;3 @A8;6 -A3;3:;8 -A3;A -A3;6 -A8;6:;N -A8;7:3; -A833 -AA;3 -AA;A QA3;3 QA3;8 QA3;A QA3;6 QA3;9 QA3;7 QA3;S QAA;3 7$;1J+++9;=+++< 39;1J+++9;=+++< ;$;3"J+++9;=+++? ++A$A"J+++9;=+++5 ++3;;"J+++3N=+++5 +++3;"J++3N;=+++5 6H;;1J++9;;=+++? +++3;"J++3N;=+++5 4A336 4A33N:3H 4A337 4A38;:83 4A8;3:;A 4A8;6:;N 4A8;H:;S 4A83;:38 Q4LA8B?:6H8R QCK%3>5:3;HR QCK%3>5:AAHR %-4A3B<:883U %-4A3B<:7!;U %4JA34R:3;6U QCK%3C5:6HNR QJ?N8C?:3;6R 4+4>'$ C+4>'$ C+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 55+4>'$ 6H;;1J++9;;=+++? ++3;;"J+++3;=+++5 ++AA;"J+++3;=+++5 88;1J+++9;=+++< 7$;1J+++9;=+++< ;$3"J+++3N=+++R +++6H"J+++89=+++5 ;$3"J++89;=+++? 4A83A:39 4A83N 4A837 4A83S 4A883 4AA;8 %-4A3B<:373U QCK%345:3;HR QCK58C5:AAN QJR;;SH:88A QCK%8C5:3;NR QCK%3>5:6HHR 4+4>'$ C+4>'$ C+4>'$ 55+4>'$ C+4>'$ C+4>'$ 37;1J+++9;=+++< ++3;;"J+++3N=+++5 +++AA"J++89;=+++5 ;$;88"J+389;=+++? +++3;"J++89;=+++5 ++6H;"J+++3;=+++5 GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C GE$-EF-C RC%C!+-EF-C GE$-EF-C GE$-EF-C 8G48638?[Q![:U 8G>3;AH>?[Q![:U 8G43S;N:K 8G48638?[Q![:U 8G43N8H>[FM[:K 8G>37AH 8G46HSA 8G>3;AH>?[Q![:U GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! E4A8;3:;A K->N333Q E$4$O5F%F:>%>P ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G ?A3;3 ?A3;A:;6 ?A3;9 GTA8;3:;A ! G?A;;3 4C636S8:;;3R 4C636S8:;;3R QQ!;N83:;;8R Q>J;;9N:9;3R Q%R;A7;:;;3 4BF?C+4FE@ 4BF?C+4FE@ LC>-G+4F!C =>!EGKF! 4$!$K$GF4?CK ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 42 5>333:U !B3G:KA !B3G:KA CI;3%:K8 3G!386:6;;>:K8 5>A;N8[5[:U 5>333:U 5>333:U ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 4+4>'$ 4+4>'$ 4+4>'$ C+4>'$ C+4>'$ C+4>'$ 4+4>'$ C+4>'$ 9$N"B+++? 3,B+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! 9$N\!+3[3ND+++< 6H;\!++3[8D+++< 88\!+3[3ND+++< 9$N\!+3[3ND+++< A$S\!+3[3ND+++< ;$;!+3[3ND+++< %-4A3B<:7!;U %-4A3B<:393U Q4LA3B?:3;AR QCK%3B5:AA9R QCK%345:3;HR QCK%845:3;NR Q4LA8B?:6H8R QCK%845:3;NR 4FE@ 4FE@ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C 8$H\!+3[3ND+++< 3;;\!++++8D+++< A$A\!+3[3ND+++< ++3$9\!++3[8D+++? 6H;\!+3[8D+++? 3$;5!+3[8D+++? 3;\!+3[3ND+++< 3\!+3[3ND+++< 4A3;8 4A3;A 4A3;6 4A3;N 4A3;H 4A33; 4A333 4A33A QQ@866?:9!NR QQ@8N><:3;8R No. 51818 AV29A10EUS % FRONT CONTROL P.W. BOARD ASS’Y (SMF-8009A-U2) %MICON P.W. BOARD ASS’Y (SMF0M001A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! !7;;3:;8 Q!C383<:8H3M 4+! 8H;!++3[8D+++< !7;;A %!G>NA<:3;8U 5T+! 3\!+3[3ND+++< !7;;6 %!G>NA<:888U 5T+! 8$8\!+3[3ND+++< !7;;9 %!G>NA<:883U 5T+! 88;!+3[3ND+++< !7;;N %!G>NA<:378U 5T+! 3$7\!+3[3ND+++< !7;;7 %!G>NA<:3;8U 5T+! 3\!+3[3ND+++< !7;3; %!G>NA<:3;AU 5T+! 3;\!+3[3ND+++< !7;38:3A %!G>NA<:3;AU 5T+! 3;\!+3[3ND+++< '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! !7;8; !7;83:88 !7;A9 !7;AN:AH !7;A7 !7;AS %!G>NA<:788U %!G>NA<:3;8U Q!C383<:393M %!G>NA<:9N3U %!G>NA<:378U %!G>NA<:AA3U 5T+! 5T+! 4+! 5T+! 5T+! 5T+! 7$8\!+3[3ND+++< 3\!+3[3ND+++< 39;!++3[8D+++< 9N;!+3[3ND+++< 3$7\!+3[3ND+++< AA;!+3[3ND+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 47;;3:;8 47;;A 47;;6 47;;9 47;3;:33 47;3S 47;83 47;88 ! 47S;3 %4LA3B?:3;AU QCK%3B5:3;NR %4LA34?:3;6U %-4A3B<:N7;U %4LA3B?:6H8U QCK%345:3;HR %4LA34?:3;6U QCK%3C5:6HNR 4+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ ;$;3"J+++9;=+++? +++3;"J+++9;=+++5 ++;$3"J+++3N=+++? N71J+++9;=+++< 6H;;1J+++9;=+++? ++3;;"J+++3N=+++5 ++;$3"J+++3N=+++? +++6H"J+++89=+++5 QJRS;6;:6H6 5J+4>'$ ;$6H"J>48H9=+++5 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @7;;3 @7;;8:;A @7;3;:33 @7;38 QQ!;H3N:;;3R QQ@866?:9!NR QQ@866?:8H;R QQ!;H3N:;;3R @C>-+4F!C 4FE@ 'C>?E%T+4FE@ @C>-+4F!C 9$N"B+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C -7;;H -7;;7 -7;;S -7;3; -7;33 -7;38 -7;3A -7;36 '3863:;6 5>333:U G@!:A685T:K3N G'!:AS5=DJ 5>333:U G@!:A68-I:K3N G@!:A68MM:K3N 5>A;N7[5[:U 4$-$G$ GE$-EF-C @$C$-$OT!%P @$C$-$ GE$-EF-C @$C$-$OF!TP @$C$-$OM@DP RC%C!+-EF-C -7;37 5>A;AA:U RC%C!+-EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! Q7;;3 Q7;;8 Q7;;A:;6 Q7;;9:;H 8G>3;AH>?[Q![:U -K4386C?>:U -K>386C?>:U -K4386C?>:U GE$K!>%GEGKF! -ETE$K!>%GEGKF! -ETE$K!>%GEGKF! -ETE$K!>%GEGKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E47;;3 T'3I873Q EJ!+-CKC4K+I%EK ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G ! J7S;3 @47;;8 ! @J7S;3 <7;;3 <7;;A 4C5T;;8:;;3R @4A;9SN:;;3L:4 45A9S83:;;9:B Q5J93-8:A!39<3 %Q!;3NS:;;3U QQ!3;S9:;;3 Q5GA;;6:4;3 Q%R;69A:;;3 JIGC+4@E' @$C$-$BF@-C! 4-G+BF@-C! JIGC C5E+JE@KC! @E%C+JE@KC! BC>-'BF%C+<>4? <>4? G7;;3 G7;;8 G7;;A ! G7S;3 QGD;N3S:;;AR QGD;N3S:;;AR QGD;N3S:;;AR QGD;786:;;3 'IGB+GDEK4B 'IGB+GDEK4B 'IGB+GDEK4B 'IGB+GDEK4B ! A$39> !;;;3 !;;;8 !;;;A:;9 !;;;N !;;;H:;7 !;;;S:33 !;;38 !;;3A %!G>NA<:3;8U %!G>NA<:3;6U %!G>NA<:3;8U %!G>NA<:398U %!G>NA<:3;8U %!G>NA<:3;AU %!G>NA<:8HAU %!G>NA<:883U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3\!+3[3ND+++< 3;;\!+3[3ND+++< 3\!+3[3ND+++< 3$9\!+3[3ND+++< 3\!+3[3ND+++< 3;\!+3[3ND+++< 8H\!+3[3ND+++< 88;!+3[3ND+++< !;;36 !;;39 !;;3N:3H !;;37:83 !;;88 !;;86 !;;8H !;;A; %!G>NA<:3;8U %!G>NA<:6HAU %!G>NA<:3;AU %!G>NA<:3;8U %!G>NA<:6H8U %!G>NA<:6H8U %!G>NA<:6H8U %!G>NA<:6H8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3\!+3[3ND+++< 6H\!+3[3ND+++< 3;\!+3[3ND+++< 3\!+3[3ND+++< 6$H\!+3[3ND+++< 6$H\!+3[3ND+++< 6$H\!+3[3ND+++< 6$H\!+3[3ND+++< !;;A8 !;;A6:9A !;;99 !;;9H:HH !;;73 !;;7H !;;7S:S3 !;;S8 %!G>NA<:6H8U %!G>NA<:;!;U %!G>NA<:;!;U %!G>NA<:;!;U %4JA34R:3;6U %!G>NA<:883U %!G>NA<:883U %!G>NA<:6H8U 5T+! 5T+! 5T+! 5T+! 4+4>'$ 5T+! 5T+! 5T+! 6$H\!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< ;$3"J+++3N=+++R 88;!+3[3ND+++< 88;!+3[3ND+++< 6$H\!+3[3ND+++< !;;SA !;;S6 !;;S9 !;;SN !;;SH !;;S7 !;;SS !;3;;:;8 %!G>NA<:883U %!G>NA<:6H8U %!G>NA<:6HAU %!G>NA<:883U %!G>NA<:3;8U %!G>NA<:;!;U %!G>NA<:3;8U %!G>NA<:3;8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 88;!+3[3ND+++< 6$H\!+3[3ND+++< 6H\!+3[3ND+++< 88;!+3[3ND+++< 3\!+3[3ND+++< ;$;!+3[3ND+++< 3\!+3[3ND+++< 3\!+3[3ND+++< !;3;A:;N !;3;H !;33; !;333 !;338 !;33A:36 !;33S !;38; %!G>NA<:3;AU %!G>NA<:3;8U %!G>NA<:3;8U %!G>NA<:3;AU %!G>NA<:3;8U %!G>NA<:3;AU %!G>NA<:9NAU %!G>NA<:AA8U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;\!+3[3ND+++< 3\!+3[3ND+++< 3\!+3[3ND+++< 3;\!+3[3ND+++< 3\!+3[3ND+++< 3;\!+3[3ND+++< 9N\!+3[3ND+++< A$A\!+3[3ND+++< !;383 !;388 !;38A !;386 !;389:87 !;38S !;3A; !;3A3 %!G>NA<:378U %!G>NA<:3;AU %!G>NA<:N78U %!G>NA<:3;3U %!G>NA<:6H8U %!G>NA<:78AU %!G>NA<:3;6U %!G>NA<:;!;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3$7\!+3[3ND+++< 3;\!+3[3ND+++< N$7\!+3[3ND+++< 3;;!+3[3ND+++< 6$H\!+3[3ND+++< 78\!+3[3ND+++< 3;;\!+3[3ND+++< ;$;!+3[3ND+++< !;3AA !;3A9 !;3AN !;3AH:AS !;366 !;36H !;393 !;398:96 %!G>NA<:;!;U %!G>NA<:3;8U %!G>NA<:3;AU %!G>NA<:888U %!G>NA<:3;AU %!G>NA<:6H8U %!G>NA<:37AU %!G>NA<:883U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! ;$;!+3[3ND+++< 3\!+3[3ND+++< 3;\!+3[3ND+++< 8$8\!+3[3ND+++< 3;\!+3[3ND+++< 6$H\!+3[3ND+++< 37\!+3[3ND+++< 88;!+3[3ND+++< !;399:9N !;39H !;397 !;3N3 !;3N8 !;3NA !;3N9 %!G>NA<:3;3U %!G>NA<:;!;U %!G>NA<:883U %!G>NA<:3;8U %!G>NA<:39AU %!G>NA<:N78U Q!C363<:3;AM 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 4+! 3;;!+3[3ND+++< ;$;!+3[3ND+++< 88;!+3[3ND+++< 3\!+3[3ND+++< 39\!+3[3ND+++< N$7\!+3[3ND+++< 3;\!++3[6D+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 5C%I 4B+-FD% 4B+I' 5>E%+'FDC! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4;;;3 4;;;8 4;;;A 4;;;6 4;;;9:;N QCK%;<5:6HHR %4JA34R:3;6U %4L334?:889U QCK%;<5:3;7R %4L334?:889U C+4>'$ 4+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ ++6H;"J++N$A=+++5 ;$3"J+++3N=+++R ++8$8"J+++3N=+++? +3;;;"J++N$A=+++5 ++8$8"J+++3N=+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 43 AV29A10EUS % AV SW P.W. BOARD ASS’Y (SMF0S002A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! 4;;;H 4;;;7 4;;38:3A 4;;36 4;;3H 4;;3S 4;;8; 4;;83 %CBH345:6HNU %4L334?:889U %4JA34R:3;6U %4LA3B?:N78U %-4A3B<:39;U %CBH345:6HNU %4JA34R:3;6U %CBH345:6HNU C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ 6H"J+++3N=+++5 ++8$8"J+++3N=+++? ;$3"J+++3N=+++R +N7;;1J+++9;=+++? 391J+++9;=+++< 6H"J+++3N=+++5 ;$3"J+++3N=+++R 6H"J+++3N=+++5 !;3;3:;S !;33;:33 !;338:3A !;336 !;339 !;33N !;33H !;337 %!G>NA<:H9;U %!G>NA<:3;AU %!G>NA<:78AU %!G>NA<:AAAU %!G>NA<:6HAU %!G>NA<:78AU %!G>NA<:88AU %!G>NA<:6HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! H9!+3[3ND+++< 3;\!+3[3ND+++< 78\!+3[3ND+++< AA\!+3[3ND+++< 6H\!+3[3ND+++< 78\!+3[3ND+++< 88\!+3[3ND+++< 6H\!+3[3ND+++< 4;;88 4;;8A 4;;86 4;;8H:87 4;;8S 4;;A;:A8 4;;A6:AS 4;;6; %4JA3>R:3;9U %4LA3C?:AAAU %4JA34R:3;6U %CBH345:6HNU %-4A3B<:393U %4JA34R:3;6U %4JA34R:3;6U %-4A3B<:AA;U 4+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 3"J++3;=+++R ;$;AA"J+++89=+++? ;$3"J+++3N=+++R 6H"J+++3N=+++5 39;1J+++9;=+++< ;$3"J+++3N=+++R ;$3"J+++3N=+++R AA1J+++9;=+++< !;33S !;38; !;383 !;388 !;38A !;386 !;389 !;38N %!G>NA<:39AU %!G>NA<:8HAU %!G>NA<:888U %!G>NA<:6HAU %!G>NA<:78AU %!G>NA<:39AU %!G>NA<:88AU %!G>NA<:6HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 39\!+3[3ND+++< 8H\!+3[3ND+++< 8$8\!+3[3ND+++< 6H\!+3[3ND+++< 78\!+3[3ND+++< 39\!+3[3ND+++< 88\!+3[3ND+++< 6H\!+3[3ND+++< 4;;63 4;;68:6A 4;;69:6H 4;;67 4;;6S:9; 4;;93 4;;98:9H 4;;9S:N3 %-4A3B<:8H;U %4JA34R:3;6U %4JA34R:3;6U %CBH345:6HNU %4JA34R:3;6U %CBH345:6HNU %4JA34R:3;6U %CBH345:3;NU 4+4>'$ 4+4>'$ 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ 8H1J+++9;=+++< ;$3"J+++3N=+++R ;$3"J+++3N=+++R 6H"J+++3N=+++5 ;$3"J+++3N=+++R 6H"J+++3N=+++5 ;$3"J+++3N=+++R 3;"J+++3N=+++5 !;38H !;387:8S !;3A;:A3 !;3A8 !;3AA !;3A6 !;3A9 !;3AN %!G>NA<:8HAU %!G>NA<:78AU %!G>NA<:AS3U %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:3;AU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 8H\!+3[3ND+++< 78\!+3[3ND+++< AS;!+3[3ND+++< 8$8\!+3[3ND+++< AA\!+3[3ND+++< 8$8\!+3[3ND+++< AA\!+3[3ND+++< 3;\!+3[3ND+++< 4;;N8 4;;NA:N9 4;;H; %!G>NA<:;!;U %-4A3B<:78;U %CBH3B5:889U 5T+! 4+4>'$ C+4>'$ ;$;!+3[3ND+++< 781J+++9;=+++< 8$8"J+++9;=+++5 !;3AH !;3A7:AS !;36; !;363 !;368 !;36A:66 !;369 !;36N %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:3;AU %!G>NA<:6HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 8$8\!+3[3ND+++< AA\!+3[3ND+++< 8$8\!+3[3ND+++< AA\!+3[3ND+++< 8$8\!+3[3ND+++< AA\!+3[3ND+++< 3;\!+3[3ND+++< 6H\!+3[3ND+++< !;36H !;367:6S !;39;:93 !;398:NH !;3N7 !;3NS !;3H; !;3H3 %!G>NA<:88AU %!G>NA<:AS3U %!G>NA<:3;6U %!G>NA<:3;3U %!G>NA<:H9;U %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:H9;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 88\!+3[3ND+++< AS;!+3[3ND+++< 3;;\!+3[3ND+++< 3;;!+3[3ND+++< H9!+3[3ND+++< 8$8\!+3[3ND+++< AA\!+3[3ND+++< H9!+3[3ND+++< !;3H8 !;3HA !;3H6 !;3H9 !;3HN !;3HH !;3H7 !;3HS %!G>NA<:888U %!G>NA<:AAAU %!G>NA<:H9;U %!G>NA<:AAAU %!G>NA<:3;AU %!G>NA<:78AU %!G>NA<:39AU %!G>NA<:6HAU 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 8$8\!+3[3ND+++< AA\!+3[3ND+++< H9!+3[3ND+++< AA\!+3[3ND+++< 3;\!+3[3ND+++< 78\!+3[3ND+++< 39\!+3[3ND+++< 6H\!+3[3ND+++< !;37; !;373:78 !;37A:76 !;379:S; !;3S3 !;3S8 !;3S6:S9 !;3SN %!G>NA<:8HAU %!G>NA<:9N8U %!G>NA<:3;8U %!G>NA<:3;3U %!G>NA<:888U %!G>NA<:3;3U %!G>NA<:883U Q!T;3T<:3;3 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! F5+! 8H\!+3[3ND+++< 9$N\!+3[3ND+++< 3\!+3[3ND+++< 3;;!+3[3ND+++< 8$8\!+3[3ND+++< 3;;!+3[3ND+++< 88;!+3[3ND+++< 3;;!++++3D+++< !;3SH !;3S7 !;3SS !;8;; !;8;3 !;8;A:;9 Q!?38N<:373U %!G>NA<:H9;U %!G>NA<:3;3U %!G>NA<:H9;U Q!?38N<:393U %!G>NA<:H9;U 4+! 5T+! 5T+! 5T+! 4+! 5T+! 37;!++3[8D+++< H9!+3[3ND+++< 3;;!+3[3ND+++< H9!+3[3ND+++< 39;!++3[8D+++< H9!+3[3ND+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @;;;3 @;;;A @;;;9:;7 @;;;S @;;3;:36 @;;39:3N @;;3H:88 %Q@;S8?:6!HU %Q@;S8?:6!HU %Q@;S8?:6!HU %Q@;A6?:6!HU %Q@;S8?:6!HU %Q@;A6?:6!HU %Q@;S8?:3!9U E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C -;;;3:;8 -;;;A -;;;6 -;;;9:;7 -;;3; 5>333:U 5>A;N7[5[:U 5>A;8H:U 5>A;9N[5[:U 5>A;N7[5[:U GE$-EF-C RC%C!+-EF-C RC%C!+-EF-C RC%C!+-EF-C RC%C!+-EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! Q;;;3:;8 Q;;;H:;7 Q;;;S:38 8G48H38[MT[:U 8G>33N8[MT[:U 8G48H38[MT[:U GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E4;;;3 E4;;;8 E4;;;A E4;;;6 E4;;;9 E4;;38 E4;S;3 E4;S;8 G->N;;; 5!8H=3N98-N;!>R ?6G3N3N88-:K47; >K864A88S>3;CI G:7;787>%%':D 5U8S@3N33K4:3; K>675;89J:U K>675;AAJ:U E$4$O5P E4 E$4$O-:!>5P E$4$ E$4$O5F%F:>%>P E$4$O5P E$4$O5P E$4$O5P E4;S;A 5536AH>J:U E$4$O5F%F:>%>P OGC!=E4CP ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G 4%;;;3 @4;;;3 @4;;;8 ?;;;3 ?;;;8 ?;;;A ?;;;6 ?;;;9 U;;;3 QTL39;9?3:9; %Q!;A3A:;;HU %Q!;6A3:;;3U %!G>NA<:AS;U %Q!;A7S:;;AU %!G>NA<:;!;U %Q!;A7S:;;AU %!G>NA<:;!;U Q>U;NNS:;;3R 4F%%C4KF! C5E+JE@KC! C5E+JE@KC! 5T+! JC!!EKC+LC>-G 5T+! JC!!EKC+LC>-G 5T+! 4!MGK>@ 4;3;3:3; 4;333:38 4;33A:36 4;339:3H 4;337:3S 4;38; 4;383 AS!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 44 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! %4LA3B?:6H8U QCK%345:6HHR %4LA3B?:3;8U QCK%3B5:3;NR QCK%3B5:3;9R %4LA3B?:3;AU QCK%3B5:3;9R 4+4>'$ C+4>'$ 4+4>'$ C+4>'$ C+4>'$ 4+4>'$ C+4>'$ 6H;;1J+++9;=+++? ++6H;"J+++3N=+++5 3;;;1J+++9;=+++? +++3;"J+++9;=+++5 ++++3"J+++9;=+++5 ;$;3"J+++9;=+++? ++++3"J+++9;=+++5 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 AV29A10EUS %100Hz P.W. BOARD ASS’Y (SMF0Z004A-U2) '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ +++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ !CGEGKF! 4;388 4;38A 4;386 4;389 4;38N:87 4;38S 4;3A; 4;3A3 QCK%3B5:3;NR QCK%3B5:3;9R %4LA3B?:3;AU %4LA3B?:3;8U QCK%3B5:3;NR QCK%3B5:3;9R %4LA3B?:3;AU QCK%3B5:3;9R C+4>'$ C+4>'$ 4+4>'$ 4+4>'$ C+4>'$ C+4>'$ 4+4>'$ C+4>'$ +++3;"J+++9;=+++5 ++++3"J+++9;=+++5 ;$;3"J+++9;=+++? 3;;;1J+++9;=+++? +++3;"J+++9;=+++5 ++++3"J+++9;=+++5 ;$;3"J+++9;=+++? ++++3"J+++9;=+++5 !;;;3:;N !;;;7:;S !;;3;:38 !;3;3 !;3;8:;A !;3;6 !;3;9:;N !;3;H:3A %!G>NA<:;!;U %!G>NA<:;!;U %!G>NA<:3;3U %!G>NA<:AA8U %!G>NA<:888U %!G>NA<:AA8U %!G>NA<:888U %!G>NA<:H9;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! ;$;!+3[3ND+++< ;$;!+3[3ND+++< 3;;!+3[3ND+++< A$A\!+3[3ND+++< 8$8\!+3[3ND+++< A$A\!+3[3ND+++< 8$8\!+3[3ND+++< H9!+3[3ND+++< 4;3A8 4;3AA 4;3A6 4;3A9 4;3AN 4;3AH 4;3A7:AS 4;36; %4LA3B?:3;AU QCK%3B5:3;NR QCK%3B5:3;9R QCK%3B5:3;NR QCK%3B5:3;9R %4LA3B?:3;AU QC%43B5:3;9R QC%43C5:3;NR 4+4>'$ C+4>'$ C+4>'$ C+4>'$ C+4>'$ 4+4>'$ L'+C+4>'$ L'+C+4>'$ ;$;3"J+++9;=+++? +++3;"J+++9;=+++5 ++++3"J+++9;=+++5 +++3;"J+++9;=+++5 ++++3"J+++9;=+++5 ;$;3"J+++9;=+++? ++++3"J+++9;=+++5 +++3;"J+++89=+++5 !;388:8A !;386:89 !;3A8:AS !;363 !;8;3 !;8;8:;A !;8;6:;9 !;836 %!G>NA<:;!;U %!G>NA<:3;3U %!G>NA<:3;;U %!G>NA<:3;;U %!G>NA<:383U %!G>NA<:3;3U %!G>NA<:;!;U %!G>NA<:;!;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! ;$;!+3[3ND+++< 3;;!+3[3ND+++< 3;!+3[3ND+++< 3;!+3[3ND+++< 38;!+3[3ND+++< 3;;!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< 4;363:6H 4;367 4;36S 4;39;:93 4;398 4;39A 4;396 4;399 %4LA3B?:3;AU QCK%3B5:3;NR QC%43C5:3;NR QCK%345:3;HR QCK%345:6HHR %4LA3B?:3;AU QCK%345:3;HR %-4A3B<:39;U 4+4>'$ C+4>'$ L'+C+4>'$ C+4>'$ C+4>'$ 4+4>'$ C+4>'$ 4+4>'$ ;$;3"J+++9;=+++? +++3;"J+++9;=+++5 +++3;"J+++89=+++5 ++3;;"J+++3N=+++5 ++6H;"J+++3N=+++5 ;$;3"J+++9;=+++? ++3;;"J+++3N=+++5 391J+++9;=+++< !;83H !;837 !;83S !;88; !;88A !;889 !;893 !;898 %!G>NA<:3;AU %!G>NA<:AAAU %!G>NA<:3;AU %!G>NA<:788U %!G>NA<:6HAU %!G>NA<:;!;U %!G>NA<:888U %!G>NA<:H9;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 3;\!+3[3ND+++< AA\!+3[3ND+++< 3;\!+3[3ND+++< 7$8\!+3[3ND+++< 6H\!+3[3ND+++< ;$;!+3[3ND+++< 8$8\!+3[3ND+++< H9!+3[3ND+++< !;896 !;899:9N !;89H !;897 !;89S !;8N3 !;8N6 !;8H3 %!G>NA<:AS3U %!G>NA<:883U %!G>NA<:8H3U %!G>NA<:8H8U %!G>NA<:6H8U %!G>NA<:888U %!G>NA<:AS3U %!G>NA<:888U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! AS;!+3[3ND+++< 88;!+3[3ND+++< 8H;!+3[3ND+++< 8$H\!+3[3ND+++< 6$H\!+3[3ND+++< 8$8\!+3[3ND+++< AS;!+3[3ND+++< 8$8\!+3[3ND+++< !;8H6 !;A;3:;A !;A;6:;9 !;A;N:;7 !;6;3 !;6;8 !;6;6 !;6;H %!G>NA<:AS3U %!G>NA<:3;6U %!G>NA<:3;3U %!G>NA<:398U %!G>NA<:6HAU %!G>NA<:6H8U %!G>NA<:;!;U %!G>NA<:;!;U 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! 5T+! AS;!+3[3ND+++< 3;;\!+3[3ND+++< 3;;!+3[3ND+++< 3$9\!+3[3ND+++< 6H\!+3[3ND+++< 6$H\!+3[3ND+++< ;$;!+3[3ND+++< ;$;!+3[3ND+++< !;6;S %!G>NA<:;!;U 5T+! ;$;!+3[3ND+++< ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @;3;3 QQ!;H3N:;;3R @C>-+4F!C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C -;3;3:;6 -;3;S:3A -;336 -;339:3H 5>A;9N[5[:U 5>A38;[5[:U 5>A;AS[B[:U 5>A;9N[5[:U RC%C!+-EF-C RC%C!+-EF-C RC%C!+-EF-C RC%C!+-EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! Q;3;3:;8 Q;3;A:;9 Q;3;N:;S Q;33; Q;333 Q;338 Q;33A:39 Q;33N 8G48638?[Q![:U -K4A8AK?:U 8G48638?[Q![:U 8G>3;AH>?[Q![:U -K4A8AK?:U 8G>3;AH>?[Q![:U 8G48638?[Q![:U 8G>SAA>G[Q![:K GE$K!>%GEGKF! -ETE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! -ETE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! Q;33H 8G43H6;G[Q![:K GE$K!>%GEGKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E4;3;3 4U>8;NSQ E$4$O5F%F:>%>P ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G 4%;;;3 <;;;3 <;;;8 ?;3;3:;6 QTL39;9?3:9; Q%R;6N9:;;3 Q%R;6NA:;;3 4C68N73:;;3M 4F%%C4KF! 'E%+4F%%C4KF! 'E%+4F%%C4KF! LC>-G+4F!C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4;;;3 4;;;8 4;;;A 4;;;6 4;;;9 4;;;N 4;;;H:;S 4;3;3 %4LA34?:3;6U %CBH345:6HNU %4LA34?:3;6U %CBH345:6HNU %4LA34?:3;6U %CBH345:6HNU %-4A3B<:6!;U %CBH345:3;NU 4BE'+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ C+4>'$ 4+4>'$ C+4>'$ ++;$3"J+++3N=+++? 6H"J+++3N=+++5 ++;$3"J+++3N=+++? 6H"J+++3N=+++5 ++;$3"J+++3N=+++? 6H"J+++3N=+++5 6$;1J++9;=+++< 3;"J+++3N=+++5 4;3;8 4;3;A 4;3;6 4;3;9 4;3;N 4;3;H 4;3;7 4;3;S %4LA3C?:6HAU %CBH345:6HNU %4LA3B?:398U %-4A3B<:3;8U %4LA34?:3;6U %4JA34R:886U %4LA3B?:398U %-4A3B<:AS3U 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ ;$;6H"J+++89=+++? 6H"J+++3N=+++5 +39;;1J+++9;=+++? 3;;;1J++9;=+++< ++;$3"J+++3N=+++? ;$88"J++3N=+++R +39;;1J+++9;=+++? AS;1J+++9;=+++< 4;33; 4;333 4;338 4;33A:37 4;33S:86 4;389:8N 4;387 4;38S %CBH345:3;NU %4LA3C?:6HAU %-4A3B<:AA3U %4JA34R:886U %-4A3B<:AA3U %-4A3B<:A!;U %4LA34?:3;6U %4JA34R:886U C+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ 3;"J+++3N=+++5 ;$;6H"J+++89=+++? AA;1J+++9;=+++< ;$88"J++3N=+++R AA;1J+++9;=+++< A$;1J+++9;=+++< ++;$3"J+++3N=+++? ;$88"J++3N=+++R 4;3A; 4;3A3 4;3A8 %-4A3B<:AS3U %4LA3B?:398U %4LA3C?:6HAU 4+4>'$ 4BE'+4>'$ 4BE'+4>'$ AS;1J+++9;=+++< +39;;1J+++9;=+++? ;$;6H"J+++89=+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No. 51818 45 AV29A10EUS '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4>'>4EKF! 4;3AA 4;3A6 4;3AN:AH 4;3A7 4;3AS 4;36; 4;363 4;379:7N %4LA3B?:398U %4LA34?:N7AU %4LA34?:N7AU %4LA3B?:398U %4LA3C?:6HAU %CBH345:6HNU Q4GA3B<:3;;R %4LA34?:3;6U 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4BE'+4>'$ C+4>'$ 4+4>'$ 4BE'+4>'$ +39;;1J+++9;=+++? ;$;N7"J+++3N=+++? ;$;N7"J+++3N=+++? +39;;1J+++9;=+++? ;$;6H"J+++89=+++? 6H"J+++3N=+++5 3;1J+++9;=+++< ++;$3"J+++3N=+++? 4;8;3 4;8;8:;9 4;8;N 4;8;H:33 4;838:3A 4;836:3H 4;837 4;83S %CBH345:6HNU %4LA34?:3;6U %CBH345:6HNU %4LA34?:3;6U %-4A3B<:37;U %4LA34?:3;6U %-4A3B<:9N3U %CBH345:6HNU C+4>'$ 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ C+4>'$ 6H"J+++3N=+++5 ++;$3"J+++3N=+++? 6H"J+++3N=+++5 ++;$3"J+++3N=+++? 371J+++9;=+++< ++;$3"J+++3N=+++? 9N;1J+++9;=+++< 6H"J+++3N=+++5 4;88;:A9 4;8AH:A7 4;8AS:68 4;893 4;898:9A 4;896 4;899 4;89N %4LA34?:3;6U %CBH345:3;NU %4LA34?:3;6U %-4A3B<:6!;U %4LA34?:3;6U %-4A3B<:38;U %-4A3B<:8H;U %CBH345:3;NU 4BE'+4>'$ C+4>'$ 4BE'+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ C+4>'$ ++;$3"J+++3N=+++? 3;"J+++3N=+++5 ++;$3"J+++3N=+++? 6$;1J++9;=+++< ++;$3"J+++3N=+++? 381J+++9;=+++< 8H1J+++9;=+++< 3;"J+++3N=+++5 4;8N3 4;8N8:NA 4;8N6 4;8N9 4;8H3 4;8H8:HA 4;8H6 4;8H9 %-4A3B<:6!;U %4LA34?:3;6U %-4A3B<:38;U %-4A3B<:8H;U %-4A3B<:6!;U %4LA34?:3;6U %-4A3B<:38;U %-4A3B<:8H;U 4+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ 4+4>'$ 4BE'+4>'$ 4+4>'$ 4+4>'$ 6$;1J++9;=+++< ++;$3"J+++3N=+++? 381J+++9;=+++< 8H1J+++9;=+++< 6$;1J++9;=+++< ++;$3"J+++3N=+++? 381J+++9;=+++< 8H1J+++9;=+++< 4;A;3 4;A;8:;A 4;6;8:;A 4;6;6 %CBH345:6HNU %4LA34?:3;6U %4LA34?:3;6U %-4A3B<:AA;U C+4>'$ 4BE'+4>'$ 4BE'+4>'$ 4+4>'$ 6H"J+++3N=+++5 ++;$3"J+++3N=+++? ++;$3"J+++3N=+++? AA1J+++9;=+++< @;3;8:;7 @;3;S @;8;3:;A @;8;6 @;8;9:;7 @;8;S:3; @;893 @;8N3 @;8H3 %Q@;S8?:3!9U %Q@;A6?:39;U %Q@;S8?:A!AU %Q@;A6?:N!7U %Q@;A6?:3;;U QQ@866?:6!HR %Q@;A6?:3;;U %Q@;S8?:3!9U %Q@;S8?:9!NU %Q@;S8?:9!NU %Q@;S8?:9!NU E%-I4KF! E%-I4KF! E%-I4KF! 4FE@ E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! E%-I4KF! -;6;3 5>333:U GE$-EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ K!>%GEGKF! Q;3;3:;8 Q;8;3 Q;893:98 Q;89A Q;8N3 Q;8H3 Q;A;3:;A 8G>3;AH>?[Q![:U 8G>3;AH>?[Q![:U 8G>3;AH>?[Q![:U 8G48638?[Q![:U 8G>3;AH>?[Q![:U 8G>3;AH>?[Q![:U 8G48638?[Q![:U GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! GE$K!>%GEGKF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ E4 E4;3;3 E4;8;3 E4;8;8 E4;8;A E4;A;3 E4;6;3 E4;6;8 ='4A8A;-:Q>:LA G>>6SHSB[=3 F56SS6B G>>6S99B@[=3 K->S3H7K[%3:U G:7;787>%%':D K4HDBA6JI:U E$4$O5P E$4$O5F%F:>%>P E$4$O5P E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$O5F%F:>%>P E$4$O-ETE:5FGP ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FKBC!G E%-I4KF! E%-I4KF! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4%;;;A @4;;3;:38 @4;;3A @4;;36:39 U;3;3 U;8;3 QTL39;9?3:9; %Q!;A3A:;;SU %Q!;A3A:;;6U %Q!;A3A:;;HU Q>U;N99:;;3R Q>U;8HA:;;3R 4F%%C4KF! C5E+JE@KC! C5E+JE@KC! C5E+JE@KC! 4!MGK>@ 4!MGK>@ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ REMOTE CONTROL UNIT PART LIST (RM-C54-1C) '()*+%&$ '()*+%(," -"./)01*0&2 ! !"#$%&$ ++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++3 ++8 8>>;A;HAA 8>>;A;HA8 L>KKC!M+4F=C! G@E-C+4F=C! ++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FRONT 2 46 6$H"B+++? ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -EF-C ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ @;;;3:;A @;3;3 '()*+%(," -"./)01*0&2 ! GX,Y&Z+%&$ '()*+%&$ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4FE@ 1 No. 51818 AV29A10EUS PACKING 6 3 ($4) 5 ! 7 8 9 5 ! ! 4 10 11 1 2 PACKING PARTS LIST '()*+%&$ '()*+%(," -"./)01*0&2 ! !"#$%&$ ++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ AV29A10EUS ++3 ++8 ++A ++6 ++9 ++N ++H ++7 >C53;;8:;H9:C >C53;98:;NN:C @43338N:;;8>:I >C53;6H:>;8:C >C5A;83:;;8:C !5:496:34 LK:96;3A:3C >C53;9;:;;3:C '>4?E%T+4>GC CI!F+@>LC@ 4IGBEF%+>GGM 'F@M+L>T 'F@M+L>T !C5F4F%+I%EK D>!!>%KM+4>!U:!>M+4>!- ! ++S ! +3; ! +33 @4K;S76:;;3>:I @4K;S79:;;3>:I @4K;S7N:;;3>:I E%GK+LFF? E%GK+LFF? E%GK+LFF? 61/.+02+3."* O$8P ++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ No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chome, Moriya-cho, Kanagawa-ku, Yokohama, Kanagawa-prefecture, 221-8528, Japan 4 AV29A10EUS-U #3 VP 0109 DP3051 AV29A10EUS SCHEMATIC DIAGRAMS COLOUR TELEVISION AV29A10EUS CD-ROM BASIC CHASSIS MF No.SML200109 CONTENTS ! ! ! ! ! 1 NOTE ON USING CIRCUIT DIAGRAMS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!! 2-1 SEMICONDUCTOR SHAPES !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!! 2-2 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!! 2-3 BLOCK DIAGRAM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CIRCUIT DIAGRAMS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!! 2-5 PATTERN DIAGRAMS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!! 2-21 COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. No.51818 Sep. 2001 2001 Sept. AV29A10EUS AV29A10EUS STANDARD CIRCUIT DIAGRAM AV SW PWB PATTERN n NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY The components identified by the symbol and shading are critical for safety. For continued safety replace safety critical TOP components only with manufactures recommended parts. 2.SPECIFIED VOLTAGE AND WAVEFORM VALUES The voltage and waveform values have been measured under the following conditions. (1)Input signal (2)Setting : Color bar signal positions of each knob/button and variable resistor :Original setting position Type No indication MY MM PP MPP MF TF BP TAN (3)Coils No unit Others (4)Power Supply :Ceramic capacitor :Mylar capacitor :Metalized mylar capacitor :Polypropylene capacitor :Metalized polypropylene capacitor :Metalized film capacitor :Thin film capacitor :Bipolar electrolytic capacitor :Tantalum capacitor :[µH] :As specified when shipped (3)Internal resistance of tester :DC 20k¶/V (4)Oscilloscope sweeping time :H :V Ë 20µS/div Ë 5mS/div :Others Ë Sweeping time is specified (5)Voltage values :All DC voltage values Since the voltage values of signal circuit vary to some extent according to adjustments, use them as reference values. 3.INDICATION OF PARTS SYMBOL [EXAMPLE] In the PW board :R1209¨R209 4.INDICATIONS ON THE CIRCUIT DIAGRAM (5)Test point :Test point :Only test point display (6)Connecting method :Connector :Wrapping or soldering :Receptacle (7)Ground symbol :LIVE side ground :ISOLATED(NEUTRAL) side ground :EARTH ground :[¶] 5.NOTE FOR REPAIRING SERVICE :[K¶] This models power circuit is partly different in the GND. The M :[M¶] difference of the GND is shown by the LIVE : () side GND and the Type No indication :As specified ISOLATED(NEUTRAL) : () side GND. Therefore, care must be taken for the following points. (1)Do not touch the LIVE side GND or the LIVE side GND and the ISOLATED(NEUTRAL) side GND simultaneously. If the above :Carbon resistor caution is not respected, an electric shock may be caused. OMR :Oxide metal film resistor Therefore, make sure that the power cord is surely removed from MFR :Metal film resistor MPR :Metal plate resistor UNFR :Uninflammable resistor ISOLATED(NEUTRAL) side GND or never measure with a FR :Fusible resistor measuring apparatus ( oscilloscope, etc.) the LIVE side GND and *Composition resistor 1/2 [W] is specified as 1/2S or Comp. Capacitance value 1 or higher less than 1 Withstand voltage No indication the receptacle when, for example, the chassis is pulled out. (2)Do not short between the LIVE side GND and ISOLATED(NEUTRAL) side GND at the same time. If the above precaution is not respected , a fuse or any parts will be broken. (2)Capacitors :[pF] :[µF] :DC50[V] Others :DC withstand voltage [V] AC indicated :AC withstand voltage [V] *Electrolytic Capacitors 47/50[Example]:Capacitance value [µF]/withstand voltage[V] VP0109 DP6051 :5V K Others No.51818 :9V :DIGITAL ground Rated allowable power No indication :1/16 [W] 2-32 :B2(12V) *Respective voltage values are indicated (1)Resistors Resistance value No unit :B1 Since the circuit diagram is a standard one, the circuit and circuit constants may be subject to change for improvement without any notice. NOTE Due improvement in performance, some part numbers show in the circuit diagram may not agree with those indicated in the part list. When ordering parts, please use the numbers that appear in the Parts List. Sept. 2001 No.51818 AV29A10EUS AV29A10EUS CONTENTS CRT SOCKET PWB PATTERN SEMICONDUCTOR SHAPES 2-2 BLOCK DIAGRAM 2-3 CIRCUIT DIAGRAMS MAIN PWB CIRCUIT DIAGRAM 2-5 POWER & DEF PWB CIRCUIT DIAGRAM 2-9 100Hz PWB CIRCUIT DIAGRAM 2-11 MICON PWB CIRCUIT DIAGRAM 2-13 FRONT CONTROL PWB CIRCUIT DIAGRAM 2-15 CRT SOCKET PWB CIRCUIT DIAGRAM 2-17 AV SW PWB CIRCUIT DIAGRAM 2-19 TOP PATTERN DIAGRAMS MAIN PWB PATTERN 2-21 POWER & DEF PWB PATTERN 2-23 100Hz PWB PATTERN 2-25 MICON PWB PATTERN 2-27 FRONT CONTROL PWB PATTERN 2-29 CRT SOCKET PWB PATTERN 2-31 AV SW PWB PATTERN 2-32 SEMICONDUCTOR SHAPES TRANSISTOR BOTTOM VIEW FRONT VIEW TOP VIEW CHIP TR C + * * + /,5 - + * - + * - + * B E IC BOTTOM VIEW FRONT VIEW TOP VIEW 1 OUT N E IN 1 IN E OUT 1 N N CHIP IC TOP VIEW 1 N N N 1 N 2-2 N No.51818 No.51818 2-31 AV29A10EUS AV29A10EUS BLOCK DIAGRAM IC665 POWER BASS IC662 LPF R-OUT IC101 SIF TU001 MULTI SOUND PROCESSOR TUNER HEADPHONE MAIN PWB R BBE L-OUT SP R IC601 IC663 R POWER AMP L L SP L FRONT CTRL PWB (2/2) IC203 B-OUT IC202 VTV1 TV OUT EXT-1 R-OUT IC551 L TV RTV 63 M_CV/Y V1, L1, R1 YS, SLOW1 EXT-2 IC101 IC101 AV SW V2, C2, R2 M_C L2 OUT VIDEO PROCESSOR & CODEC SAMPLE RATE CONVERTER FIELD AND LINE CONVERTER G-OUT B IC301 R DEF & RGB PROCESSOR VD V IC201 ROTATION COIL IC202 IC201 R2 OUT V2 OUT EXT-3 VM COIL G CRT SOCKET PWB H.OUT V3 / Y3, C3 L3, R3 IC301 IC203 ENHANCE 100Hz PWB AV SW PWB 2.9Mbit IC402 EW/V DRIVE SDA1 SCL1 V100, U100, Y100 S EXT-4 IC003 SO RAM SDA2 SCL2 Q521 H.OUT IC001 KEY MICRO PROCESSOR IC012 H.DY MASK POM FRONT CTRL PWB IC004 (1/2) IC001 MICON PWB MEMORY V.DY IC401 T551 REMOCON V.OUT HVT SCREEN REMOCON RECEIVER EHV B1 AC IN FOCUS2 FOCUS1 POWER SW FUSE CRT ROTATION LF901 No.51818 D931 T901 POWER & DEF PWB 2-3 2-4 No.51818 AV29A10EUS 3.3V 0V 3.3V 0V 3.4V 6V 3.3V 3V 3.1V 2.3V 4.9V 0V 3.6V 3.6V 3.6V 3.5V 3.2V 3.1V 3.6V 3.5V 1.9V 3.7V 4.8V 0V 0V 0.2V 3.7V 0.2V 3.7V 0.2V 3.7V 2.3V 3.7V 0V 1.3V -1.1V 0V 0V 0V 0.8V 0V 3.6V 3.6V 0V 0V 0V 0V 0V 0V 0V 0V 3.8V 4.2V 0V 4.9V 3.1V 7.9V 0.2V 0V 0.8V 0V 2V 1.9V 2.3V 4.4V 4.4V 32V 4.4V 0V 4.4V 0V 0V 0V 4.9V 3.7V 0V 3.7V 8.9V 3.6V 3.6V 3.1V 0V 3.6V 0V 0V 4.2V 0V 0V 4.8V 0V 3.8V MAIN PWB CIRCUIT DIAGRAM 0V 1.6V 0V 0V 0V 0V CIRCUIT DIAGRAMS AV29A10EUS -U2 0V 0V 0V 0V 0V 4.3V 4.9V 3.6V 3.6V 3.9V 0V 0.1V -U2 0V 3.1V 0V 0V 3.1V 1V 3.2V 3.1V 3.4V 7.9V 0.6V 0.6V 0.6V 0.8V 0.5V 2V 0.5V 0.5V 7.2V 7.2V 6.4V 6.4V 5.9V 6V 5.6V 5.6V 12V 1V 1V 0.8V 3.1V 3.1V 3.5V 3V 3.6V 3.1V 2.5V 0V 2.3V 1.5V -0.1V 4.8V 0V 4.2V 4V 0.4V 2.5V 1.7V 2.9V 0V 3.1V MAIN PWB ASS'Y 3.1V 0V 0.3V 1.2V 2.9V 1.5V 1.5V 3.1V 0V 1.1V 0.2V 0V 0.2V (1/2) SMF-1010A-U2 6.2V 2.9V 2.9V 0V 8.9V 5.6V 11V 5V 12V 1.5V 1.5V 2V 1.5V 1.5V 2V 6V 11.4V No.51818 8V 2-5 2-6 No.51818 0V AV29A10EUS AV29A10EUS *DEFFERENCE LIST -U2 -U2 0V -0.1V 0V 1.2V 0V 0V 3.7V 0V 0V 8V 1.6V 0V 0V 4.8V 0V 0V 4.8V 0V 1.6V 0.1V 2V 3.7V 2V 0V 8.5V 0V 12.3V 26.1V 0V 0V 12.4V 2.6V 3.7V 3.6V 4.8V 0V 4.9V 1.4V 1.4V 2.2V 4.8V 4.9V MAIN PWB ASS'Y 5.3V (2/2) 4.8V 25.4V *DEFFERENCE LIST -U2 25.4V 8.9V 6.5V 0.1V 5.8V 2.7V 2.1V 4.4V 4.4V 4.5V 4.5V 4.4V 4.5V 4.4V 4.4V 4.4V 4.4V 4.4V 4.4V 4.4V 4.5V 4.5V 4.4V 4.4V 4.4V 4.4V 0V 4.4V 0V 8.9V 4.4V 4.5V 4.4V 4.4V 0V 4.4V 4.4V 4.4V 4.4V 4.4V 4.4V 4.4V 4.4V No.51818 2-7 2-8 No.51818 SMF-1010A-U2 0V AV29A10EUS AV29A10EUS POWER & DEF PWB CIRCUIT DIAGRAM 2.3V 0V MPP .047 AV275V IC401 1 0.7 12.9V 12V 0.1V 0.7V 0V IC401 0.5V 13.2 V 3 12.5 -10.3 12.9 0.5V V V V 30 AC250V 2.3V AC250V IC401 0.1V 5 1.5V 50 IC401 C902 .1 AC275V QFZ9075-104 6 QQH0091-003-I2 IC401 7 0.8 30 1/4W C903 .047 AC275V QFZ9075-473 Q501 3.2V 2.9V 388V 4.6V D 80 -13.8 V 3.6V -12.7V -8.9V 1200 37V .0011 1.5KVH MPP 2.2V 141.1V .018 630V 11V 141.5 V 5V 0V 2.3V 4.9V 2V Q501 G 4.8 3.3V 11V 3.2V Q521 B 0V 2 2V 18.7V 304V 1/4W 0V 2.5V 3.6V 22V 18.6V 9.9V 10V 2.1V 0.7V 3.6V 0.9V 0.9V 2.3V 10V 2.6V 0V 0V 3.8V 141.5V 8.9V 8.9V AC250V 1W T551 5 8 380 130 POW & DEF PWB ASS'Y 6 SMF-2006A-U2 120 2 80 TP-91 (B1) DY01 (ITC) No.51818 2-9 2-10 No.51818 TP-E ( ) AV29A10EUS AV29A10EUS 100Hz PWB CIRCUIT DIAGRAM -U2 100Hz PWB ASS'Y SMF0Z004A-U2 No.51818 2-11 2-12 No.51818 -U2 -U2 -U2 -U2 AV29A10EUS AV29A10EUS MICON PWB CIRCUIT DIAGRAM MICON PWB ASS'Y SMF0M001A-U2 AT24C3229A10EU No.51818 2-13 2-14 No.51818 AV29A10EUS AV29A10EUS FRONT CONTROL CIRCUIT DIAGRAM FRONT CONTRL PWB ASS'Y 3.5V 3.4V 4.9V SMF-8009A-U2 3.2V 0.4V 3.4V 1.9V 1.9V 2.9V 2.9V 0V 0V No.51818 2-15 2-16 No.51818 AV29A10EUS AV29A10EUS CRT SOCKET PWB CIRCUIT DIAGRAM CRT SOCKET PWB ASS'Y 80 SMF-3006A-U2 3V 12V 3V 9.7V 199V 121.7 121.3V V 122.8 V A68QCP891XA27 4.9V CRT SOCKET 12V 80 3V 12V 3V 9.8V 199V 152V 113.5 V 112.1V 70 2.9V 12V 3V 9.8V 199V 122.6 123.1V 124.9 V V 129.3V 5.9V 12V 129V 12V 11.4V 5.3V 66.6V 6.8V 3.3V 2.7V 1.7V 0V 1.1V -U2 66.6V 3.6V 3.1V 0V 0V No.51818 2-17 2-18 No.51818 AV29A10EUS AV29A10EUS AV SW PWB CIRCUIT DIAGRAM AV SW PWB ASS'Y 0V -1.3V 0.1V SMF0S002A-U2 0V -1.3V 8.9V 4.4V 0.1V 0.4V 0V 1V 0.1V 0.1V 0V 0.3V 0V 0.2V 0.9V 3.4V 2.5 0V 0.1V 0V 0.1V 0V 0.1V 0.1V 0.2V 1.5V 6.6V 6.6V 0V 8.9V 0.1V 0V 1.1V 0.1V 0.2V 0V 1.3V 0V 3.6V 4.8V 3.6V 0V 0.1V 0.1V 0.1V 0.6V 0V 0.2V 8.9V 4.3V 1.6V 3.6V 0.1V 0.1V 0.1V 0V 0.1V 0V 0.1V 0.1V 0V 1.4V 0V 3.6V 0.1V 3.6V 0.1V 0V 0.1V 6.6V 0V 0V 6.6V 6.6V 0V 2.4V 6.6V 1.7V 0V 0V -1V 0.1V 0V -1V No.51818 2-19 2-20 No.51818 AV29A10EUS PATTERN DIAGRAM AV29A10EUS MAIN PWB PATTERN FRONT No.51818 2-21 2-22 No.51818 AV29A10EUS AV29A10EUS POWER & DEF PWB PATTERN FRONT No.51818 2-23 2-24 No.51818 TP-91(B1) TP-E AV29A10EUS 100Hz PWB PATTERN (SOLDER SIDE) AV29A10EUS 100Hz PWB PATTERN (PARTS SIDE) TOP TOP No.51818 2-25 2-26 No.51818 AV29A10EUS MICON PWB PATTERN (SOLDER SIDE) AV29A10EUS MICON PWB PATTERN (PARTS SIDE) TOP TOP No.51818 2-27 2-28 No.51818 AV29A10EUS AV29A10EUS FRONT CONTROL PWB PATTERN FRONT No.51818 2-29 2-30 No.51818 VICTOR COMPANY OF JAPAN, LIMITED HOME AV NETWORK BUSINESS UNIT 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama, Kanagawa-prefecture, 221-8528, Japan 4 AV29A10EUS-U #3 Printed in Japan VP 0109 DP6051