Download PT Programming Manual

PT Programming Manual
Hybrid IP-PBX
Model No.
KX-NS700
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
KX-NS700: PFMPR Software File Version 004.00000 or later.
Manuals and supporting information are provided on the Panasonic Web site at:
http://panasonic.net/pcc/support/pbx/
Introduction
Introduction
About this Programming Manual
The PT Programming Manual is designed to serve as a reference to programming the Panasonic IP-PBX using
a Panasonic proprietary telephone (PT) with display.
The PT Programming Manual is divided into the following sections:
Section 1, Overview
Provides an overview of programming the PBX.
Section 2, PT Programming
Serves as reference operating instructions when using a display PT to programme the PBX.
Feature Programming References
Provides a list of all related PT programming items for each feature.
References Found in the PT Programming Manual
PT Programming Manual References
Related sections of the PT Programming Manual are listed for your reference.
Feature Guide References
The Feature Guide explains what the PBX can do, as well as how to obtain the most of its many features and
facilities. Sections from the Feature Guide are listed throughout the PT Programming Manual for your
reference.
Links to Other Pages and Manuals
If you are viewing this manual with a PC, certain items are linked to different sections of the PT Programming
Manual and other IP-PBX manuals. Click on a link to jump to that section.
Linked items include:
• PT Programming Manual References
• Feature Guide References
2
PT Programming Manual
Introduction
Safety Notices
Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent
damage to property.
The notices are classified as follows, according to the severity of injury or damage:
WARNING
This notice means that misuse could result in death
or serious injury.
CAUTION
This notice means that misuse could result in injury
or damage to property.
WARNING
Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise.
These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an
authorised Panasonic Factory Service Centre.
NOTES
•
•
•
•
•
The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of
this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) Software
Version Reference.
Some optional hardware, software, and features are not available in some countries/areas, or for some
PBX models. Please consult your certified Panasonic dealer for more information.
Product specifications are subject to change without notice.
Throughout this manual, PT displays and other displays are shown in English. Other languages may be
available, depending on the country or area.
In this manual, the suffix of each model number (e.g., KX-NS700NE) is omitted unless necessary.
PT Programming Manual
3
Table of Contents
Table of Contents
1 Overview ...................................................................................................9
1.1
1.1.1
1.1.2
1.1.3
Introduction .....................................................................................................................10
Introduction .....................................................................................................................10
Ways to Programme ....................................................................................................10
Password Security ..........................................................................................................11
Entering Characters .......................................................................................................12
2 PT Programming ....................................................................................15
2.1
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
4
PT Programming .............................................................................................................16
Programming Instructions ..............................................................................................16
Slot Number and Port Number .......................................................................................19
Basic Programming ........................................................................................................20
[000] Date & Time ........................................................................................................20
[001] System Speed Dialling Number ..........................................................................20
[002] System Speed Dialling Name .............................................................................20
[003] Extension Number ..............................................................................................20
[004] Extension Name .................................................................................................21
[005] Extension Personal Identification Number (PIN) ................................................21
[006] Operator Assignment ..........................................................................................21
[007] DSS Console Paired Telephone .........................................................................21
[008] Absent Message .................................................................................................22
[010] Charge Margin ....................................................................................................22
[011] Charge Tax .........................................................................................................22
[012] Charge Rate per Unit ..........................................................................................22
System Management Programming ...............................................................................23
[100] Flexible Numbering .............................................................................................23
[101] Time Service Switching Mode ............................................................................23
[102] Time Service Starting Time ................................................................................23
[103] Idle Line Access (Local Access) .........................................................................24
[110] System Password for Administrator—for PT Programming ...............................24
[111] System Password for User—for PT Programming .............................................24
[112] Manager Password .............................................................................................24
[120] Verification Code ................................................................................................24
[121] Verification Code Name ......................................................................................25
[122] Verification Code Personal Identification Number (PIN) .....................................25
[123] Verification Code COS Number ..........................................................................25
[130] Decimal Point Position for Currency ...................................................................25
[131] Currency .............................................................................................................25
[190] Main Processing (MPR) Software Version Reference ........................................26
[191] IP Address Reference ........................................................................................26
[194] UM Auto Configuration .......................................................................................26
Timer Programming ........................................................................................................27
[200] Hold Recall Time ................................................................................................27
[201] Transfer Recall Time ..........................................................................................27
[203] Intercept Time .....................................................................................................27
[204] Hot Line Waiting Time ........................................................................................27
[205] Automatic Redial Repeat Times .........................................................................27
[206] Automatic Redial Interval ....................................................................................27
[207] Door Unlock Time ...............................................................................................28
[208] Call Duration Count Starting Time for LCOT ......................................................28
[209] DISA Delayed Answer Time ...............................................................................28
[210] DISA Trunk-to-Trunk Call Prolong Time .............................................................28
PT Programming Manual
Table of Contents
2.1.6
2.1.7
2.1.8
[211] DISA Intercept Time ...........................................................................................28
TRS/Barring/ARS Programming .....................................................................................29
[300] TRS/Barring Override by System Speed Dialling ...............................................29
[301] TRS/Barring Denied Code ..................................................................................29
[302] TRS/Barring Exception Code .............................................................................29
[303] Special Carrier Access Code ..............................................................................29
[304] Emergency Number ............................................................................................29
[320] ARS Mode ..........................................................................................................29
[321] ARS Leading Number .........................................................................................30
[322] ARS Routing Plan Table Number .......................................................................30
[325] ARS Exception Number ......................................................................................30
[330] ARS Routing Plan Time Table ............................................................................30
[331–346] ARS Routing Plan Table (1–16) .................................................................31
[347] ARS Routing Plan Table (1–48) .........................................................................31
[350] ARS Carrier Name ..............................................................................................31
[351] ARS Trunk Group for Carrier Access .................................................................31
[352] ARS Removed Number of Digits for Carrier Access ..........................................31
[353] ARS Carrier Access Code ..................................................................................32
Trunk Programming ........................................................................................................33
[400] LCOT/BRI Trunk Connection ..............................................................................33
[401] LCOT/BRI Trunk Name ......................................................................................33
[402] LCOT/BRI Trunk Group Number ........................................................................33
[409] LCOT/BRI Trunk Number Reference .................................................................33
[410] LCOT Dialling Mode ...........................................................................................33
[411] LCOT Pulse Rate ...............................................................................................33
[412] LCOT DTMF Minimum Duration .........................................................................34
[413] LCOT CPC Signal Detection Time—Outgoing ...................................................34
[414] LCOT CPC Signal Detection Time—Incoming ...................................................34
[415] LCOT Reverse Circuit ........................................................................................34
[416] LCOT Pause Time ..............................................................................................34
[417] LCOT Flash/Recall Time ....................................................................................34
[418] LCOT Disconnect Time ......................................................................................35
[420] BRI Network Type ..............................................................................................35
[421] BRI DIL/DDI/MSN Selection ...............................................................................35
[422] BRI Subscriber Number ......................................................................................35
[424] BRI Layer 1 Active Mode ....................................................................................35
[425] BRI Layer 2 Active Mode ....................................................................................35
[426] BRI Configuration ...............................................................................................36
[427] BRI TEI Mode .....................................................................................................36
[450] DIL 1:1 Destination .............................................................................................36
[451] DID Number ........................................................................................................36
[452] DID Name ...........................................................................................................36
[453] DID Destination ..................................................................................................37
[471] Host PBX Access Code ......................................................................................37
[472] Extension-to-Trunk Call Duration .......................................................................37
[473] Trunk-to-Trunk Call Duration ..............................................................................37
[475] DISA Silence Detection ......................................................................................37
[476] DISA Continuous Signal Detection .....................................................................37
[477] DISA Cyclic Signal Detection .............................................................................38
[490] Caller ID Signal Type ..........................................................................................38
COS Programming .........................................................................................................39
[500] Trunk Group Number ..........................................................................................39
[501] TRS/Barring Level ..............................................................................................39
[502] Trunk Call Duration Limitation ............................................................................39
[503] Call Transfer to Trunk .........................................................................................39
PT Programming Manual
5
Table of Contents
2.1.9
2.1.10
2.1.11
6
[504] Call Forwarding to Trunk ....................................................................................39
[505] Executive Busy Override ....................................................................................40
[506] Executive Busy Override Deny ...........................................................................40
[507] DND Override .....................................................................................................40
[508] Account Code Mode ...........................................................................................40
[509] TRS/Barring Level for System Speed Dialling ....................................................40
[510] TRS/Barring Level for Extension Dial Lock ........................................................40
[511] Manager Assignment ..........................................................................................40
[512] Permission for Door Open Access .....................................................................41
[514] Time Service Manual Switching .........................................................................41
[515] Wireless XDP Parallel Mode for Paired Telephone ............................................41
[516] Programming Mode Limitation ............................................................................41
Extension Programming .................................................................................................42
[600] EXtra Device Port (XDP) Mode ..........................................................................42
[601] Terminal Device Assignment ..............................................................................42
[602] Class of Service ..................................................................................................42
[603] Extension User Group ........................................................................................42
[604] Extension Intercept Destination ..........................................................................43
[605] Call Forwarding—No Answer Time ....................................................................43
[606] CLIP/COLP Number ...........................................................................................43
[620] Incoming Call Distribution Group Member ..........................................................43
[621] Incoming Call Distribution Group Delayed Ringing ............................................43
[622] Incoming Call Distribution Group Floating Extension Number ...........................44
[623] Incoming Call Distribution Group Name .............................................................44
[624] Incoming Call Distribution Group Distribution Method ........................................44
[625] Destination for Overflow Time Expiration ...........................................................44
[626] Overflow Time ....................................................................................................44
[627] Destination When All Busy .................................................................................45
[628] Queuing Call Capacity ........................................................................................45
[629] Queuing Hurry-up Level .....................................................................................45
[630] Queuing Time Table ...........................................................................................45
[631] Sequences in Queuing Time Table ....................................................................45
[632] Maximum Number of Agents ..............................................................................46
[640] Extension User Groups of a Paging Group ........................................................46
[641] External Pagers of a Paging Group ....................................................................46
[650] Extension User Groups of a Pickup Group .........................................................46
[660] UM Group Floating Extension Number ...............................................................47
[661] VM Group Floating Extension Number ...............................................................47
[680] Idle Extension Hunting Type ...............................................................................47
[681] Idle Extension Hunting Group Member ..............................................................47
[690] PS Registration ...................................................................................................47
[691] PS Termination ...................................................................................................48
[692] Personal Identification Number (PIN) for PS Registration ..................................48
[699] CS Status Reference ..........................................................................................48
Resource/Interface Programming ..................................................................................49
[700] External Pager Floating Extension Number .......................................................49
[711] Music on Hold .....................................................................................................49
[712] Music for Transfer ...............................................................................................49
[720] Doorphone Call Destination ................................................................................49
[729] Doorphone Number Reference ..........................................................................49
[730] Outgoing Message (OGM) Floating Extension Number .....................................50
[731] Outgoing Message (OGM) Name .......................................................................50
[732] DISA Security Mode ...........................................................................................50
SMDR & Maintenance Programming .............................................................................51
[801] External Modem Control .....................................................................................51
PT Programming Manual
Table of Contents
2.1.12
[802] SMDR Page Length ............................................................................................51
[803] SMDR Skip Perforation ......................................................................................51
[804] SMDR Outgoing Call Printing .............................................................................51
[805] SMDR Incoming Call Printing .............................................................................51
[810] Remote Programming ........................................................................................51
[811] Modem Floating Extension Number ...................................................................52
[812] ISDN Remote Floating Extension Number .........................................................52
Card Programming .........................................................................................................53
[900] Slot Card Type Reference ..................................................................................53
[901] Slot Card Deletion ..............................................................................................53
[902] Slot Card Reset ..................................................................................................53
[914] Expansion Unit Deletion .....................................................................................53
Feature Programming References .............................................................55
PT Programming Manual
7
Table of Contents
8
PT Programming Manual
Section 1
Overview
This section provides an overview of programming the
PBX.
PT Programming Manual
9
1.1.1 Introduction
1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference for the
Panasonic IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBX
to your requirements. These settings control the functions of the PBX, and changing them is referred to as
"system programming".
Only one person can perform system programming at a time. Any other users trying to enter system
programming mode will be denied access.
Ways to Programme
There are two programming methods:
• PC (Personal Computer) Programming
All features and settings of the PBX can be programmed through PC programming with Maintenance
Console. Installing and starting Maintenance Console are explained in the Installation Manual.
• PT (Proprietary Telephone) Programming
A subset of the features and settings of the PBX can be programmed using a PT. PT programming is
described in Section 2.1 PT Programming. An extension user can perform system programming by
entering three-digit programming numbers with a PT.
10
PT Programming Manual
1.1.2 Password Security
1.1.2 Password Security
To maintain system security, system passwords are required to access certain programming functions of the
PBX. By giving different users access to different passwords, it is possible to control the amount of
programming that each user is able to perform.
The following types of system passwords are available:
Password
Description
Format
System Password (PT) for
User
Used to access user-level PT programming. The specific PT
programming items that may be programmed at user level
can be selected through system programming.
System Password (PT) for
Administrator
Used to access administrator-level PT programming. All PT
programming settings are available.
4–10 digits
CAUTION
To the Administrator or Installer regarding the system password
1. Please provide all system passwords to the customer.
2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3. The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to Section 1.1.3 Entering Characters.
PT Programming Manual
11
1.1.3 Entering Characters
1.1.3 Entering Characters
The following characters can be used when storing a name, message, or other text entry data using a PT. The
tables below show you the characters available by pushing each button a specific number of times.
Note
For NE models, the tables for Option mode differ depending on the Area Code selected in Easy Setup.
Table 1 (Standard mode)
12
PT Programming Manual
1.1.3 Entering Characters
Table 2 (Option mode)
Table 2 (Option mode for NE model)
PT Programming Manual
13
1.1.3 Entering Characters
Table 2 (Option mode for Greece)
[Example of Entering Characters]
To enter "Ann":
n
A
2
6
(5 times)
n
OR
6
(5 times)
FWD/DND
Note
•
•
•
•
•
14
To erase the character on the cursor, press CLEAR.
To move the cursor to the left, press
.
To move the cursor to the right, press
. When entering two or more characters that use the same
button consecutively (e.g., "G" and "I"), you must press this button or the FWD/DND button after
entering the first character.
If SELECT is pressed, the characters for each button will be displayed in reverse order.
To toggle between Table 1 and Table 2 when using the KX-DT300/KX-DT500/KX-NT300/KX-NT500/
KX-T7600 series, press the leftmost soft button.
PT Programming Manual
Section 2
PT Programming
This section serves as reference operating instructions
when using a display PT to programme the PBX.
PT Programming Manual
15
2.1.1 Programming Instructions
2.1 PT Programming
2.1.1 Programming Instructions
Required Telephone/Extension
PBX settings can be customised through system programming by using a multi-line display Digital Proprietary
Telephone (DPT) or IP Proprietary Telephone (IP-PT), such as the KX-NT343, KX-NT346 or KX-NT500 series.
Multi-line display Analogue Proprietary Telephones (APTs) are not supported. To access system programming,
the Class of Service (COS) assigned to the PT’s extension must be programmed to allow system programming,
or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
Only one system programming session can be performed at a time. This means that only one user can access
system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Characters.
Buttons and Functions
Fixed Buttons
KX-DT300/KX-DT500
KX-NT300/KX-NT500
Function
KX-T7600
PREVIOUS
NEXT
(Page up)
(Page down)
ENTER
Back to Previous Menu
(CANCEL)
SHIFT
SHIFT
PAUSE
PAUSE
PROGRAM
HOLD
END
AUTO ANS
MUTE
16
PT Programming Manual
MESSAGE
SHIFT
SELECT
2.1.1 Programming Instructions
Fixed Buttons
Function
KX-DT300/KX-DT500
KX-NT300/KX-NT500
KX-T7600
FLASH/
RECALL
FLASH
TRANSFER
CLEAR
INTERCOM
SECRET
Entering System Programming Mode
Using a PT to perform system programming allows an authorised extension user to set a wide range of PBX
features and parameters.
There are two levels of system programming that can be performed with a PT: administrator-level programming
and user-level programming.
Administrator Level:
Allows the programming of all settings accessible through PT programming.
#
System Password for Administrator
—for PT Programming
PROGRAM/
PAUSE
Programming No.
3 digits
= 1234
User Level:
Allows the programming of limited settings as permitted through PC programming.
System Password for User
—for PT Programming
PROGRAM/
PAUSE
Programming No.
= 1234
3 digits
Note
means default value throughout this manual.
Programming Structure
Programming
Number
Programming Group Title
[0XX]
Basic Programming
[1XX]
System Management
Programming
[2XX]
Timer Programming
Description
Frequently used programming steps
Global system parameters
System timers
PT Programming Manual
17
2.1.1 Programming Instructions
Programming
Number
[3XX]
Programming Group Title
Description
TRS/Barring/ARS Programming
TRS/Barring and Automatic Route Selection (ARS)
programming
[4XX]
Trunk Programming
Trunk, trunk group, and BRI line settings
[5XX]
COS Programming
Class of Service parameters
[6XX]
Extension Programming
[7XX]
Resource/Interface
Programming
[8XX]
SMDR & Maintenance
Programming
Card Programming
[9XX]
18
PT Programming Manual
Extension feature settings
PBX interface and external device settings
Station Message Detail Recording (SMDR) and
maintenance feature settings
Used to display the cards currently installed in the
PBX, or to delete a card from system programming
before physically removing it.
2.1.2 Slot Number and Port Number
2.1.2 Slot Number and Port Number
Some programming items require a slot number and port number to be entered, as in the examples below.
[410]
Slot No.
Port No.
SELECT
DTMF/Pulse
ENTER
[699]
Slot No.
Port No.
ENTER
CS Status
Reference only
ENTER
END
END
Slot numbers are entered as three-digit numbers of the form "XYY":
• X: Shelf number (1–4) (1: Main Unit, 2–4: Expansion Unit)
• YY: Slot number (01–06)
(e.g. "102" for Main unit slot 2)
Port numbers are entered as two-digit numbers (e.g., "04" for port 4).
PBX Model
KX-NS700
Free Slot Number
101–106
201–204
301–304
401–404
PT Programming Manual
19
2.1.3 Basic Programming
2.1.3 Basic Programming
[000] Date & Time
[In 12-hour Format]
[000]
ENTER
Year
Month
Date
00–35
01–12
01–31
Hour
Minute
01–12
00–59
NEXT
SELECT
(AUTO ANS/MESSAGE)
AM/PM
ENTER
END
(HOLD)
ENTER
[In 24-hour Format]
[000]
ENTER
NEXT
Year
Month
Date
00–35
01–12
01–31
Hour
Minute
00–23
00–59
ENTER
ENTER
END
(HOLD)
[001] System Speed Dialling Number
[001]
Speed Dialling No.
Telephone No.
000–999
Max. 32 digits
ENTER
END
ENTER
To the Next Speed Dialling No.
To the Desired Speed Dialling No.
CANCEL
NEXT
[002] System Speed Dialling Name
[002]
Speed Dialling No.
Name
000-999
Max. 20 characters
ENTER
ENTER
END
[003] Extension Number
[003]
Current Extn. No.
ENTER
20
PT Programming Manual
1–5 digits
New Extn. No.
1–5 digits
ENTER
END
2.1.3 Basic Programming
Note
If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose
extension number is to be programmed/modified, quit the application first.
[004] Extension Name
[004]
ENTER
Extn. No.
Name
1–5 digits
Max. 20 characters
ENTER
END
[005] Extension Personal Identification Number (PIN)
[005]
ENTER
Extn. No.
PIN
1–5 digits
Max. 10 digits
END
ENTER
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification
number (PIN) (verification code PIN or extension PIN) of the PBX.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping PINs secret.
b. Selecting complex, random PINs that cannot be easily guessed.
c. Changing PINs frequently.
[006] Operator Assignment
[006]
ENTER
Time Mode
Extn. No.
1 Day/2 Lunch/
3 Break/4 Night
1–5 digits
END
ENTER
[007] DSS Console Paired Telephone
[007]
DSS Console No.
ENTER
01–08
Extn. No.
1–5 digits
ENTER
END
Note
•
•
This programme is only available after the port connected to the DSS Console is assigned as "DSS
Console" in [601] Terminal Device Assignment.
Note that if one or more SDN buttons have been set at the DSS Console, they must be deleted before
this setting can be changed.
PT Programming Manual
21
2.1.3 Basic Programming
[008] Absent Message
[008]
ENTER
Location No.
Message
1–8
Max. 16 characters
ENTER
END
[010] Charge Margin
[010]
Margin XX.YY%
ENTER
2+2 decimal places
ENTER
END
[011] Charge Tax
[011]
ENTER
Location No.
Tax XX.YY%
01–03
2+2 decimal places
ENTER
END
[012] Charge Rate per Unit
[012]
ENTER
22
PT Programming Manual
Trunk Group No.
Charge Rate
01–64
Max. 8 digits
including decimal point
ENTER
END
2.1.4 System Management Programming
2.1.4 System Management Programming
[100] Flexible Numbering
[100]
Location No.
Feature No.
01–68
1–4 digits
ENTER
To the Desired Location No.
ENTER
END
(HOLD)
To the Next Location No.
NEXT
CANCEL
[101] Time Service Switching Mode
[101]
ENTER
SELECT
(AUTO ANS/MESSAGE)
Manual/Automatic
END
ENTER
[102] Time Service Starting Time
[In 12-hour Format]
[102]
Day No.
Time Mode
0 Sun/1 Mon/
2 Tue/3 Wed/
4 Thu/5 Fri/6 Sat
ENTER
Hour:Minute
01:00–12:59
SELECT
AM/PM
1 Day-1/2 Lunch/
3 Day-2/4 Night
ENTER
END
To the Next Time Mode
To the Next Day No.
NEXT
Page up
PT Programming Manual
23
2.1.4 System Management Programming
[In 24-hour Format]
[102]
Day No.
ENTER
Hour:Minute
Time Mode
00:00–23:59
0 Sun/1 Mon/
1 Day-1/2 Lunch/
2 Tue/3 Wed/
3 Day-2/4 Night
4 Thu/5 Fri/6 Sat
ENTER
END
To the Next Time Mode
To the Next Day No.
Page up
NEXT
[103] Idle Line Access (Local Access)
[103]
ENTER
Location No.
Trunk Group No.
01–64
01–64
ENTER
END
[110] System Password for Administrator—for PT Programming
[110]
Password
ENTER
4–10 digits
1234
ENTER
END
[111] System Password for User—for PT Programming
[111]
Password
ENTER
4–10 digits
1234
ENTER
END
[112] Manager Password
[112]
Password
ENTER
4–10 digits
1234
ENTER
END
[120] Verification Code
[120]
ENTER
24
PT Programming Manual
Location No.
Verification Code
0001–1000
1–4 digits
ENTER
END
2.1.4 System Management Programming
[121] Verification Code Name
[121]
ENTER
Location No.
Name
0001–1000
Max. 20 characters
ENTER
END
[122] Verification Code Personal Identification Number (PIN)
[122]
ENTER
Location No.
PIN
0001–1000
Max. 10 digits
ENTER
END
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification
number (PIN) (verification code PIN or extension PIN) of the PBX.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping PINs secret.
b. Selecting complex, random PINs that cannot be easily guessed.
c. Changing PINs frequently.
[123] Verification Code COS Number
[123]
ENTER
Location No.
COS No.
0001–1000
01–64
ENTER
END
[130] Decimal Point Position for Currency
[130]
Desired No.
ENTER
0–6
ENTER
END
[131] Currency
[131]
Currency
ENTER
3 characters
ENTER
END
PT Programming Manual
25
2.1.4 System Management Programming
[190] Main Processing (MPR) Software Version Reference
[190]
Expansion Unit No.
ENTER
MPR/SPR Version
END
Reference only
1: For MPR(Main Unit)
2: For SPR1(Expansion Unit-1)
3: For SPR2(Expansion Unit-2)
4: For SPR3(Expansion Unit-3)
[191] IP Address Reference
[191]
Mode No.
ENTER
1: MPR LAN
2: MPR-MNT
3: DSP1
4: DSP2
IP Address
END
Reference only
ENTER
[194] UM Auto Configuration
[194]
ENTER
Mode No.
Yes/No
1: User/UM Execute
2: UM Execute
Press Soft Key
END
Note
Automatically starts creating mailboxes when executed.
• Note that it may take some time (e.g., about 30 seconds for 10 mailboxes, and about 300 seconds for
100 mailboxes) for completing mailbox creation. The confirmation tone will be heard and "Complete"
will be displayed on the LCD when the process finished.
• In case that some mailboxes are in use or UM System Maintenance is active, the creating mailboxes
are terminated. The error tone will be heard and "Rejected" will be displayed on the LCD. Try to execute
the process again after a while.
26
PT Programming Manual
2.1.5 Timer Programming
2.1.5 Timer Programming
[200] Hold Recall Time
[200]
Time
0–240 s
ENTER
END
(HOLD)
ENTER
[201] Transfer Recall Time
[201]
Time
1–240 s
ENTER
ENTER
END
[203] Intercept Time
[203]
ENTER
Time Mode
Time
1 Day/2 Lunch
3 Break/4 Night
1–240 s
ENTER
END
[204] Hot Line Waiting Time
[204]
Time
ENTER
0–15 s
ENTER
END
[205] Automatic Redial Repeat Times
[205]
Number of Times
0–10
ENTER
ENTER
END
[206] Automatic Redial Interval
[206]
Time
ENTER
(1–120) ×10 s
ENTER
END
PT Programming Manual
27
2.1.5 Timer Programming
[207] Door Unlock Time
[207]
Time
ENTER
2–7 s
ENTER
END
[208] Call Duration Count Starting Time for LCOT
[208]
Time
ENTER
0–60 s
ENTER
END
[209] DISA Delayed Answer Time
[209]
Time
ENTER
0–30 s
ENTER
END
[210] DISA Trunk-to-Trunk Call Prolong Time
[210]
Time
ENTER
0–7 min
ENTER
END
[211] DISA Intercept Time
[211]
ENTER
28
PT Programming Manual
Time Mode
Time
1 Day/2 Lunch
3 Break/4 Night
0–60 s
ENTER
END
2.1.6 TRS/Barring/ARS Programming
2.1.6 TRS/Barring/ARS Programming
[300] TRS/Barring Override by System Speed Dialling
[300]
ENTER
SELECT
(AUTO ANS/MESSAGE)
Disable/Enable
END
(HOLD)
ENTER
[301] TRS/Barring Denied Code
[301]
ENTER
Level No.
Location No.
Denied Code
2–6
001–100
Max. 16 digits
ENTER
END
To the Next Location No.
To the Desired Location No.
NEXT
CANCEL
[302] TRS/Barring Exception Code
[302]
Level No.
ENTER
Exception Code
Location No.
2–6
001–100
Max. 16 digits
END
ENTER
[303] Special Carrier Access Code
[303]
ENTER
Location No.
Carrier Access Code
01–20
Max. 16 digits
END
ENTER
[304] Emergency Number
[304]
ENTER
Location No.
Emergency No.
01–10
Max. 32 digits
ENTER
END
[320] ARS Mode
[320]
ENTER
SELECT
Off/Idle Line/
All Access
ENTER
END
PT Programming Manual
29
2.1.6 TRS/Barring/ARS Programming
[321] ARS Leading Number
[321]
ENTER
Location No.
Leading No.
0001–1000
Max. 16 digits
END
ENTER
[322] ARS Routing Plan Table Number
[322]
Location No.
ENTER
Plan Table No.
0001–1000
01–48
END
ENTER
[325] ARS Exception Number
[325]
Location No.
ENTER
Exception No.
001–200
Max. 16 digits
ENTER
END
[330] ARS Routing Plan Time Table
[In 12-hour Format]
[330]
Plan Table No.
ENTER
Hour:Minute
01–12/00–59
01–48
SELECT
AM/PM
ARS Time No.
Day No.
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
ENTER
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
END
[In 24-hour Format]
[330]
Plan Table No.
ENTER
01–48
Day No.
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
Hour:Minute
00–23/00–59
30
PT Programming Manual
ENTER
END
ARS Time No.
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
2.1.6 TRS/Barring/ARS Programming
[331–346] ARS Routing Plan Table (1–16)
[331–346]
Day No.
0 Sun/1 Mon/2 Tue/
3 Wed/4 Thu/5 Fri/6 Sat
ENTER
ARS Time No.
Priority
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
1–6
Carrier Table No.
01–48/None
END
ENTER
[347] ARS Routing Plan Table (1–48)
[347]
Plan Table No.
ARS Time No.
Priority
01–48
1 TimeA/2 TimeB/
3 TimeC/4 TimeD
1–6
ENTER
Carrier Table No.
01–48/None
END
ENTER
[350] ARS Carrier Name
[350]
ENTER
Carrier Table No.
Name
01–48
Max. 20 characters
END
ENTER
[351] ARS Trunk Group for Carrier Access
[351]
ENTER
Carrier Table No.
Trunk Group No.
01–48
01–64
SELECT
Disable/
Enable
ENTER
END
[352] ARS Removed Number of Digits for Carrier Access
[352]
ENTER
Carrier Table No.
Digits to Remove
01–48
0–15
ENTER
END
PT Programming Manual
31
2.1.6 TRS/Barring/ARS Programming
[353] ARS Carrier Access Code
[353]
Carrier Table No.
ENTER
32
PT Programming Manual
01–48
Carrier Access Code
Max. 32 digits
ENTER
END
2.1.7 Trunk Programming
2.1.7 Trunk Programming
[400] LCOT/BRI Trunk Connection
[400]
Slot No.
Port No.
ENTER
SELECT
(AUTO ANS/MESSAGE)
No Connect/
Connect
To the Desired Port No.
END
(HOLD)
ENTER
To the Next Port No.
NEXT
CANCEL
[401] LCOT/BRI Trunk Name
[401]
ENTER
Trunk No.
Name
3 digits
Max. 20 characters
END
ENTER
[402] LCOT/BRI Trunk Group Number
[402]
ENTER
Trunk No.
Trunk Group No.
3 digits
01–64
END
ENTER
[409] LCOT/BRI Trunk Number Reference
[409]
Slot No.
Port No.
Trunk No.
END
Reference only
ENTER
[410] LCOT Dialling Mode
[410]
Slot No.
Port No.
ENTER
SELECT
DTMF/Pulse
ENTER
END
[411] LCOT Pulse Rate
[411]
Slot No.
ENTER
Port No.
SELECT
Low/High
ENTER
END
PT Programming Manual
33
2.1.7 Trunk Programming
[412] LCOT DTMF Minimum Duration
[412]
Slot No.
Port No.
ENTER
SELECT
80/160 ms
ENTER
END
[413] LCOT CPC Signal Detection Time—Outgoing
[413]
Slot No.
Port No.
Mode No.
0: None/1: 6.5/
2–113: (N–1)×8 ms
ENTER
ENTER
END
[414] LCOT CPC Signal Detection Time—Incoming
[414]
Slot No.
Port No.
Mode No.
0: None/1: 6.5/
2–113: (N–1)×8 ms
ENTER
ENTER
END
[415] LCOT Reverse Circuit
[415]
Slot No.
Port No.
ENTER
SELECT
Disable/
Outgoing/Both Call
ENTER
END
[416] LCOT Pause Time
[416]
Slot No.
Port No.
ENTER
SELECT
1.5/2.5/
3.5/4.5 s
ENTER
END
[417] LCOT Flash/Recall Time
[417]
Slot No.
ENTER
34
PT Programming Manual
Port No.
SELECT
None/80/96/112/
300/600/900/
1200 ms/option
ENTER
END
2.1.7 Trunk Programming
[418] LCOT Disconnect Time
[418]
Slot No.
Port No.
ENTER
SELECT
0.5/1.5/2.0/
4.0/12.0 s
ENTER
END
[420] BRI Network Type
[420]
Slot No.
Port No.
Network Type
00–56
ENTER
END
ENTER
[421] BRI DIL/DDI/MSN Selection
[421]
Slot No.
Port No.
ENTER
SELECT
DIL/DDI/MSN
ENTER
END
[422] BRI Subscriber Number
[422]
Slot No.
Port No.
Subscriber No.
Max. 16 digits
ENTER
ENTER
END
[424] BRI Layer 1 Active Mode
[424]
Slot No.
Port No.
ENTER
SELECT
Permanent/
Call by call
ENTER
END
Note
After changing this setting, perform [902] Slot Card Reset to enable the new setting.
[425] BRI Layer 2 Active Mode
[425]
Slot No.
ENTER
Port No.
SELECT
Permanent/
Call by call
ENTER
END
Note
After changing this setting, perform [902] Slot Card Reset to enable the new setting.
PT Programming Manual
35
2.1.7 Trunk Programming
[426] BRI Configuration
[426]
Slot No.
Port No.
SELECT
P-P/P-MP
ENTER
END
ENTER
Note
After changing this setting, perform [902] Slot Card Reset to enable the new setting.
[427] BRI TEI Mode
[427]
Slot No.
Port No.
TEI
END
00–63 (for Fix)/
ENTER
Clear (for Automatic)
ENTER
Note
After changing this setting, perform [902] Slot Card Reset to enable the new setting.
[450] DIL 1:1 Destination
[450]
Time Mode
ENTER
ENTER
Slot No.
Port No.
Destination No.
1 Day/2 Lunch/
3 Break/4 Night
1–5 digits
END
[451] DID Number
[451]
ENTER
Location No.
DDI/DID No.
0001–1000
Max. 32 digits
ENTER
END
[452] DID Name
[452]
ENTER
36
PT Programming Manual
Location No.
Name
0001–1000
Max. 20 characters
ENTER
END
2.1.7 Trunk Programming
[453] DID Destination
[453]
ENTER
Time Mode
Location No.
Destination No.
1 Day/2 Lunch/
3 Break/4 Night
0001–1000
1–5 digits
ENTER
END
[471] Host PBX Access Code
[471]
Trunk Group No.
Location No.
01–64
01–10
ENTER
Host PBX Access Code
Max.10 digits
END
ENTER
[472] Extension-to-Trunk Call Duration
[472]
ENTER
Trunk Group No.
Time
01–64
01–60 min
ENTER
END
[473] Trunk-to-Trunk Call Duration
[473]
ENTER
Trunk Group No.
Time
01–64
01–60 min
ENTER
END
[475] DISA Silence Detection
[475]
Trunk Group No.
ENTER
01–64
SELECT
No Detect/
Detect
ENTER
END
[476] DISA Continuous Signal Detection
[476]
Trunk Group No.
ENTER
01–64
SELECT
No Detect/
Detect
ENTER
END
PT Programming Manual
37
2.1.7 Trunk Programming
[477] DISA Cyclic Signal Detection
[477]
Trunk Group No.
ENTER
01–64
SELECT
No Detect/
Detect
END
ENTER
[490] Caller ID Signal Type
[490]
Slot No.
ENTER
38
PT Programming Manual
SELECT
FSK/FSK with
Visual Caller ID/DTMF ENTER
END
2.1.8 COS Programming
2.1.8 COS Programming
[500] Trunk Group Number
[500]
ENTER
Time Mode
COS No.
1 Day/2 Lunch/
3 Break/4 Night
01–64
Trunk Group No.
SELECT
(AUTO ANS/MESSAGE)
Disable/Enable
01–64
ENTER
END
(HOLD)
To the Next
To the Next Trunk Group
COS No.
No.
NEXT
Page up
[501] TRS/Barring Level
[501]
ENTER
Time Mode
COS No.
Level
1 Day/2 Lunch/
3 Break/4 Night
01–64
1–7
ENTER
END
[502] Trunk Call Duration Limitation
[502]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
END
ENTER
[503] Call Transfer to Trunk
[503]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
SELECT
Disable/
Enable
ENTER
END
[504] Call Forwarding to Trunk
[504]
COS No.
ENTER
01–64
END
PT Programming Manual
39
2.1.8 COS Programming
[505] Executive Busy Override
[505]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
END
[506] Executive Busy Override Deny
[506]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
SELECT
Disable/
Enable
ENTER
SELECT
Option/
Forced
ENTER
END
[507] DND Override
[507]
COS No.
ENTER
01–64
END
[508] Account Code Mode
[508]
COS No.
ENTER
01–64
END
[509] TRS/Barring Level for System Speed Dialling
[509]
ENTER
COS No.
TRS/Barring Level
01–64
1–7
ENTER
END
[510] TRS/Barring Level for Extension Dial Lock
[510]
ENTER
COS No.
TRS/Barring Level
01–64
1–7
ENTER
[511] Manager Assignment
[511]
COS No.
ENTER
40
PT Programming Manual
01–64
SELECT
Disable/Enable
ENTER
END
END
2.1.8 COS Programming
[512] Permission for Door Open Access
[512]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
END
[514] Time Service Manual Switching
[514]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
END
[515] Wireless XDP Parallel Mode for Paired Telephone
[515]
COS No.
ENTER
01–64
SELECT
Disable/
Enable
ENTER
END
[516] Programming Mode Limitation
[516]
COS No.
ENTER
01–64
SELECT
Disable/Personal/
System&Personal
ENTER
END
PT Programming Manual
41
2.1.9 Extension Programming
2.1.9 Extension Programming
[600] EXtra Device Port (XDP) Mode
[600]
Slot No.
Port No.
ENTER
SELECT
(AUTO ANS/MESSAGE)
Off/On
ENTER
END
(HOLD)
To the Next Port No.
To the Desired Port No.
NEXT
CANCEL
[601] Terminal Device Assignment
[601]
Slot No.
Port No.
SELECT
See below
ENTER
ENTER
END
Telephone/
DSS Console 01–08/
Voice Mail 1–(01–12)/
Voice Mail 2–(01–12)
Note
When changing the type of a port for which one or more SDN buttons are set (except when changing
between PC Console and Telephone), all SDN buttons customised for that device will be deleted.
[602] Class of Service
[602]
ENTER
Extn. No.
COS No.
1–5 digits
01–64
ENTER
END
[603] Extension User Group
[603]
ENTER
42
PT Programming Manual
Extn. No.
Extn. User Group No.
1–5 digits
001–032
END
ENTER
2.1.9 Extension Programming
[604] Extension Intercept Destination
[604]
ENTER
Time Mode
Extn. No.
Destination No.
1 Day/2 Lunch/
3 Break/4 Night
1–5 digits
Max. 32 digits
END
ENTER
[605] Call Forwarding—No Answer Time
[605]
ENTER
Extn. No.
Time
1–5 digits
0–120 s
ENTER
END
[606] CLIP/COLP Number
[606]
ENTER
Extn. No.
CLIP/COLP No.
1–5 digits
Max. 16 digits
ENTER
END
[620] Incoming Call Distribution Group Member
Incoming Call
Distribution
Group No.
[620]
ENTER
Location No.
Extn. No.
001–128
1–5 digits
001–128
ENTER
END
[621] Incoming Call Distribution Group Delayed Ringing
Incoming Call
Distribution
Group No.
[621]
ENTER
001–128
ENTER
Location No.
001–128
SELECT
Immediate/
1–6 (rings)/
No ring
END
PT Programming Manual
43
2.1.9 Extension Programming
[622] Incoming Call Distribution Group Floating Extension Number
Incoming Call
Distribution
Group No.
[622]
ENTER
Extn. No.
1–5 digits
END
ENTER
001–128
[623] Incoming Call Distribution Group Name
Incoming Call
Distribution
Group No.
[623]
ENTER
Name
Max. 20 characters
END
ENTER
001–128
[624] Incoming Call Distribution Group Distribution Method
Incoming Call
Distribution
Group No.
[624]
ENTER
SELECT
Ring/UCD/
Priority Hunt
END
ENTER
001–128
[625] Destination for Overflow Time Expiration
Incoming Call
Distribution
Group No.
[625]
ENTER
Time Mode
Destination No.
1 Day/2 Lunch/
3 Break/4 Night
Max. 32 digits
001–128
END
ENTER
[626] Overflow Time
[626]
ENTER
Incoming Call
Distribution
Group No.
001-128
44
PT Programming Manual
Overflow Time
(1–125)×10 s
ENTER
END
2.1.9 Extension Programming
[627] Destination When All Busy
Incoming Call
Distribution
Group No.
[627]
ENTER
Time Mode
Destination No.
1 Day/2 Lunch/
3 Break/4 Night
Max. 32 digits
001–128
END
ENTER
[628] Queuing Call Capacity
Incoming Call
Distribution
Group No.
[628]
ENTER
Number in Queuing
0–100
ENTER
END
001–128
[629] Queuing Hurry-up Level
Incoming Call
Distribution
Group No.
[629]
ENTER
Hurry-up Level
None/1–30
ENTER
END
001–128
[630] Queuing Time Table
Incoming Call
Distribution
Group No.
[630]
ENTER
Time Mode
Table No.
1 Day/2 Lunch/
3 Break/4 Night
01–64
001–128
END
ENTER
[631] Sequences in Queuing Time Table
[631]
ENTER
Table No.
Location No.
01–64
01–16
SELECT
None/Overflow/
Disconnect/"N" × 5 s/
Sequence "N"/OGM "N"
* Number must be entered in the "N".
ENTER
END
PT Programming Manual
45
2.1.9 Extension Programming
[632] Maximum Number of Agents
Incoming Call
Distribution
Group No.
[632]
ENTER
Number of Agents
No Limitation/01–32
ENTER
001–128
[640] Extension User Groups of a Paging Group
[640]
Paging Group No.
Extn. User Group No.
01–32
001–032
ENTER
ENTER
SELECT
No/Yes
END
[641] External Pagers of a Paging Group
[641]
Paging Group No.
External Pager No.
01–32
1, 2
ENTER
SELECT
No/Yes
END
ENTER
[650] Extension User Groups of a Pickup Group
[650]
Pickup Group No.
Extn. User Group No.
01–64
001–032
ENTER
ENTER
46
PT Programming Manual
END
SELECT
No/Yes
END
2.1.9 Extension Programming
[660] UM Group Floating Extension Number
[660]
UM Float Extn. No.
1–5 digits
ENTER
END
ENTER
[661] VM Group Floating Extension Number
[661]
VM (DPT) Group No.
Extn. No.
1–5 digits
ENTER
ENTER
END
[680] Idle Extension Hunting Type
[680]
Hunting Group No.
01–64
ENTER
SELECT
Circular/
Terminate
ENTER
END
[681] Idle Extension Hunting Group Member
[681]
Hunting Group No.
Location No.
01–64
ENTER
01–16
Extn. No.
1–5 digits
ENTER
END
[690] PS Registration
[690]
ENTER
PS No.
Extn. No.
001–128
1–5 digits
ENTER
To the PS
operation
below
END
KX-TD7690
Push power
button for 2
seconds.
Push F3
key for 2
seconds.
C.Tone
PT Programming Manual
47
2.1.9 Extension Programming
Note
For details about PS registration, refer to the Quick Installation Guide for the relevant Cell Station (CS).
[691] PS Termination
[691]
PS No.
001–128
ENTER
ENTER
END
[692] Personal Identification Number (PIN) for PS Registration
[692]
PIN for PS Registration
4 digits
1234
ENTER
ENTER
END
[699] CS Status Reference
[699]
Slot No.
ENTER
48
PT Programming Manual
Port No.
CS Status
Reference only
END
2.1.10 Resource/Interface Programming
2.1.10 Resource/Interface Programming
[700] External Pager Floating Extension Number
[700]
Pager No.
Extn. No.
1, 2
1–5 digits
ENTER
To the Desired Pager No.
END
(HOLD)
ENTER
To the Next Pager No.
NEXT
CANCEL
[711] Music on Hold
[711]
Music Source No.
END
Tone/BGM 1–8
ENTER
ENTER
[712] Music for Transfer
[712]
SELECT
Hold Music/
Ring back
ENTER
END
ENTER
[720] Doorphone Call Destination
[720]
Time Mode
Slot No.
1 Day/2 Lunch/
3 Break/4 Night
ENTER
Port No.
1–2
Destination No.
Max. 32 digits
ENTER
END
[729] Doorphone Number Reference
[729]
Slot No.
ENTER
Port No.
1–2
Doorphone No.
Reference only
END
PT Programming Manual
49
2.1.10 Resource/Interface Programming
[730] Outgoing Message (OGM) Floating Extension Number
[730]
ENTER
Message No.
Extn. No.
01–64
1–5 digits
ENTER
END
[731] Outgoing Message (OGM) Name
[731]
ENTER
Message No.
Name
01–64
Max. 20 characters
[732] DISA Security Mode
[732]
ENTER
50
PT Programming Manual
SELECT
None/
Trunk/All
ENTER
END
ENTER
END
2.1.11 SMDR & Maintenance Programming
2.1.11 SMDR & Maintenance Programming
[801] External Modem Control
[801]
ENTER
Command No.
Yes/No
1–5
Press Soft Key
END
[802] SMDR Page Length
[802]
Page length
ENTER
4–99 lines
ENTER
END
[803] SMDR Skip Perforation
[803]
Skip Perforation
ENTER
0–95 lines
ENTER
END
[804] SMDR Outgoing Call Printing
[804]
ENTER
SELECT
No print/Print
ENTER
END
[805] SMDR Incoming Call Printing
[805]
ENTER
SELECT
No print/Print
ENTER
END
[810] Remote Programming
[810]
ENTER
SELECT
Disable/
Enable
ENTER
END
PT Programming Manual
51
2.1.11 SMDR & Maintenance Programming
[811] Modem Floating Extension Number
[811]
Extn. No.
ENTER
1–5 digits
ENTER
END
[812] ISDN Remote Floating Extension Number
[812]
Extn. No.
ENTER
52
PT Programming Manual
1–5 digits
ENTER
END
2.1.12 Card Programming
2.1.12 Card Programming
[900] Slot Card Type Reference
[900]
Slot No.
Card Name
END
(HOLD)
Reference only
ENTER
[901] Slot Card Deletion
[901]
Slot No.
Delete
Confirming the
deleting operation.
ENTER
ENTER
END
To the Next Slot No.
To the Desired Slot No.
NEXT
CANCEL
[902] Slot Card Reset
[902]
Slot No.
Reset
Confirming the
resetting operation.
ENTER
ENTER
END
[914] Expansion Unit Deletion
[914]
Expansion Unit No.
ENTER
2: Expansion unit-1
3: Expansion unit-2
4: Expansion unit-3
Yes/No.
Soft key
END
(HOLD)
PT Programming Manual
53
2.1.12 Card Programming
54
PT Programming Manual
Feature Programming References
PT Programming Manual
55
Feature Programming References
Absent Message
• [008] Absent Message
Feature Guide References
2.20.2 Absent Message
Account Code Entry
• [508] Account Code Mode
Feature Guide References
2.5.4.3 Account Code Entry
Automatic Route Selection (ARS)
• [320] ARS Mode
• [321] ARS Leading Number
• [322] ARS Routing Plan Table Number
• [325] ARS Exception Number
• [330] ARS Routing Plan Time Table
• [331–346] ARS Routing Plan Table (1–16)
• [347] ARS Routing Plan Table (1–48)
• [350] ARS Carrier Name
• [351] ARS Trunk Group for Carrier Access
• [352] ARS Removed Number of Digits for Carrier Access
• [353] ARS Carrier Access Code
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Call Charge Services
• [010] Charge Margin
• [011] Charge Tax
• [012] Charge Rate per Unit
• [130] Decimal Point Position for Currency
• [131] Currency
Feature Guide References
2.22.3 Call Charge Services
Call Forwarding (FWD)
• [472] Extension-to-Trunk Call Duration
• [473] Trunk-to-Trunk Call Duration
• [504] Call Forwarding to Trunk
• [605] Call Forwarding—No Answer Time
Feature Guide References
2.3.2 Call Forwarding (FWD)
Call Hold
• [200] Hold Recall Time
56
PT Programming Manual
Feature Programming References
Feature Guide References
2.13.1 Call Hold
Call Pickup
• [650] Extension User Groups of a Pickup Group
Feature Guide References
2.4.3 Call Pickup
Call Transfer
• [201] Transfer Recall Time
• [503] Call Transfer to Trunk
• [712] Music for Transfer
Feature Guide References
2.12.1 Call Transfer
Caller ID
• [001] System Speed Dialling Number
• [002] System Speed Dialling Name
• [490] Caller ID Signal Type
Feature Guide References
2.19.1 Caller ID
Calling Line Identification (CLI) Distribution
• [001] System Speed Dialling Number
• [002] System Speed Dialling Name
Feature Guide References
2.1.1.5 Calling Line Identification (CLI) Distribution
Calling Party Control (CPC) Signal Detection
• [413] LCOT CPC Signal Detection Time—Outgoing
• [414] LCOT CPC Signal Detection Time—Incoming
Feature Guide References
2.11.9 Calling Party Control (CPC) Signal Detection
Calling/Connected Line Identification Presentation (CLIP/COLP)
• [003] Extension Number
• [422] BRI Subscriber Number
• [606] CLIP/COLP Number
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
• [003] Extension Number
PT Programming Manual
57
Feature Programming References
•
[004] Extension Name
Feature Guide References
4.2.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)
• 2.1.8 COS Programming
• [602] Class of Service
Feature Guide References
3.2.1.11 Class of Service (COS)
Dial Type Selection
• [410] LCOT Dialling Mode
• [411] LCOT Pulse Rate
• [412] LCOT DTMF Minimum Duration
Feature Guide References
2.5.4.4 Dial Type Selection
Direct In Line (DIL)
• [421] BRI DIL/DDI/MSN Selection
• [450] DIL 1:1 Destination
Feature Guide References
2.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• [421] BRI DIL/DDI/MSN Selection
• [451] DID Number
• [452] DID Name
• [453] DID Destination
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• [209] DISA Delayed Answer Time
• [210] DISA Trunk-to-Trunk Call Prolong Time
• [211] DISA Intercept Time
• [475] DISA Silence Detection
• [476] DISA Continuous Signal Detection
• [477] DISA Cyclic Signal Detection
• [604] Extension Intercept Destination
• [730] Outgoing Message (OGM) Floating Extension Number
• [731] Outgoing Message (OGM) Name
• [732] DISA Security Mode
Feature Guide References
58
PT Programming Manual
Feature Programming References
2.16.1 Direct Inward System Access (DISA)
Display Information
• [130] Decimal Point Position for Currency
• [131] Currency
Feature Guide References
2.21.4 Display Information
Do Not Disturb (DND)
• [507] DND Override
Feature Guide References
2.3.3 Do Not Disturb (DND)
Door Open
• [207] Door Unlock Time
• [512] Permission for Door Open Access
Feature Guide References
2.18.2 Door Open
Doorphone Call
• [720] Doorphone Call Destination
• [729] Doorphone Number Reference
Feature Guide References
2.18.1 Doorphone Call
Emergency Call
• [304] Emergency Number
Feature Guide References
2.5.4.2 Emergency Call
Executive Busy Override
• [505] Executive Busy Override
• [506] Executive Busy Override Deny
Feature Guide References
2.10.2 Executive Busy Override
Extension Dial Lock
• [510] TRS/Barring Level for Extension Dial Lock
Feature Guide References
2.7.3 Extension Dial Lock
Extension Personal Identification Number (PIN)
• [005] Extension Personal Identification Number (PIN)
PT Programming Manual
59
Feature Programming References
Feature Guide References
2.24.1 Extension Personal Identification Number (PIN)
Extension Port Configuration
• [007] DSS Console Paired Telephone
• [600] EXtra Device Port (XDP) Mode
Feature Guide References
5.2.6 Extension Port Configuration
External Feature Access (EFA)
• [417] LCOT Flash/Recall Time
Feature Guide References
2.11.7 External Feature Access (EFA)
Flash/Recall/Terminate
• [418] LCOT Disconnect Time
Feature Guide References
2.11.6 Flash/Recall/Terminate
Flexible Numbering/Fixed Numbering
• [100] Flexible Numbering
Feature Guide References
5.4.7 Flexible Numbering/Fixed Numbering
Floating Extension
• [623] Incoming Call Distribution Group Name
• [660] UM Group Floating Extension Number
• [661] VM Group Floating Extension Number
• [700] External Pager Floating Extension Number
• [730] Outgoing Message (OGM) Floating Extension Number
• [731] Outgoing Message (OGM) Name
• [811] Modem Floating Extension Number
• [812] ISDN Remote Floating Extension Number
Feature Guide References
5.4.8 Floating Extension
Group Call Distribution
• [621] Incoming Call Distribution Group Delayed Ringing
• [624] Incoming Call Distribution Group Distribution Method
• [632] Maximum Number of Agents
Feature Guide References
2.2.2.2 Group Call Distribution
60
PT Programming Manual
Feature Programming References
Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
• [471] Host PBX Access Code
Feature Guide References
2.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Hot Line
• [204] Hot Line Waiting Time
Feature Guide References
2.6.6 Hot Line
Idle Extension Hunting
• [680] Idle Extension Hunting Type
• [681] Idle Extension Hunting Group Member
Feature Guide References
2.2.1 Idle Extension Hunting
Incoming Call Distribution Group Features
• [620] Incoming Call Distribution Group Member
• [621] Incoming Call Distribution Group Delayed Ringing
• [622] Incoming Call Distribution Group Floating Extension Number
• [623] Incoming Call Distribution Group Name
• [624] Incoming Call Distribution Group Distribution Method
• [625] Destination for Overflow Time Expiration
• [626] Overflow Time
• [627] Destination When All Busy
• [628] Queuing Call Capacity
• [629] Queuing Hurry-up Level
• [630] Queuing Time Table
• [631] Sequences in Queuing Time Table
• [632] Maximum Number of Agents
Feature Guide References
2.2.2 Incoming Call Distribution Group Features
Integrated Services Digital Network (ISDN)
• [420] BRI Network Type
• [424] BRI Layer 1 Active Mode
• [425] BRI Layer 2 Active Mode
• [426] BRI Configuration
• [427] BRI TEI Mode
Feature Guide References
4.1.2 Integrated Services Digital Network (ISDN) Service Features
Intercept Routing
• [203] Intercept Time
• [604] Extension Intercept Destination
PT Programming Manual
61
Feature Programming References
•
[625] Destination for Overflow Time Expiration
Feature Guide References
2.1.1.6 Intercept Routing
Intercept Routing—No Destination
• [006] Operator Assignment
Feature Guide References
2.1.1.7 Intercept Routing—No Destination
Intercom Call
• [003] Extension Number
• [004] Extension Name
Feature Guide References
2.5.3 Intercom Call
Internal Call Features
• [720] Doorphone Call Destination
Feature Guide References
2.1.2 Internal Call Features
Last Number Redial
• [205] Automatic Redial Repeat Times
• [206] Automatic Redial Interval
Feature Guide References
2.6.3 Last Number Redial
Line Preference—Outgoing
• [103] Idle Line Access (Local Access)
• [500] Trunk Group Number
Feature Guide References
2.5.5.2 Line Preference—Outgoing
Manager Features
• [112] Manager Password
• [511] Manager Assignment
Feature Guide References
5.1.6 Manager Features
Multiple Subscriber Number (MSN) Ringing Service
• [421] BRI DIL/DDI/MSN Selection
• [426] BRI Configuration
Feature Guide References
62
PT Programming Manual
Feature Programming References
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Music on Hold
• [711] Music on Hold
Feature Guide References
2.13.4 Music on Hold
Network Direct Station Selection (NDSS)
• [511] Manager Assignment
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
Operator Features
• [006] Operator Assignment
Feature Guide References
5.1.5 Operator Features
Outgoing Message (OGM)
• [631] Sequences in Queuing Time Table
• [730] Outgoing Message (OGM) Floating Extension Number
Feature Guide References
2.30.2 Outgoing Message (OGM)
Outside Destinations in Incoming Call Distribution Group
• [620] Incoming Call Distribution Group Member
• [621] Incoming Call Distribution Group Delayed Ringing
• [622] Incoming Call Distribution Group Floating Extension Number
• [624] Incoming Call Distribution Group Distribution Method
• [629] Queuing Hurry-up Level
Feature Guide References
2.2.2.3 Outside Destinations in Incoming Call Distribution Group
Overflow Feature
• [625] Destination for Overflow Time Expiration
• [626] Overflow Time
• [627] Destination When All Busy
• [628] Queuing Call Capacity
• [632] Maximum Number of Agents
Feature Guide References
2.2.2.6 Overflow Feature
Paging
• [640] Extension User Groups of a Paging Group
• [641] External Pagers of a Paging Group
PT Programming Manual
63
Feature Programming References
Feature Guide References
2.17.1 Paging
Parallelled Telephone
• [600] EXtra Device Port (XDP) Mode
Feature Guide References
2.11.10 Parallelled Telephone
Pause Insertion
• [416] LCOT Pause Time
Feature Guide References
2.5.4.7 Pause Insertion
Portable Station (PS) Connection
• [690] PS Registration
• [691] PS Termination
• [692] Personal Identification Number (PIN) for PS Registration
Feature Guide References
5.2.4.1 Portable Station (PS) Connection
PS Directory
• [001] System Speed Dialling Number
• [002] System Speed Dialling Name
• [004] Extension Name
Feature Guide References
5.2.4.3 PS Directory
PS Ring Group
• [620] Incoming Call Distribution Group Member
Feature Guide References
5.2.4.2 PS Ring Group
PS Roaming by Network ICD Group
• [620] Incoming Call Distribution Group Member
• [622] Incoming Call Distribution Group Floating Extension Number
• [624] Incoming Call Distribution Group Distribution Method
Feature Guide References
4.2.6.1 PS Roaming by Network ICD Group
PT Programming
• 2.1 PT Programming
• [516] Programming Mode Limitation
64
PT Programming Manual
Feature Programming References
Feature Guide References
5.4.3 PT Programming
Queuing Feature
• [628] Queuing Call Capacity
• [629] Queuing Hurry-up Level
• [630] Queuing Time Table
• [631] Sequences in Queuing Time Table
• [632] Maximum Number of Agents
Feature Guide References
2.2.2.4 Queuing Feature
Reverse Circuit
• [415] LCOT Reverse Circuit
Feature Guide References
2.5.4.5 Reverse Circuit
Software Upgrading
• [190] Main Processing (MPR) Software Version Reference
Feature Guide References
5.4.9 Software Upgrading
Special Carrier Access Code
• [303] Special Carrier Access Code
Feature Guide References
2.5.4.9 Special Carrier Access Code
Speed Dialling—Personal/System
• [001] System Speed Dialling Number
• [002] System Speed Dialling Name
• [509] TRS/Barring Level for System Speed Dialling
Feature Guide References
2.6.4 Speed Dialling—Personal/System
Station Message Detail Recording (SMDR)
• [802] SMDR Page Length
• [803] SMDR Skip Perforation
• [804] SMDR Outgoing Call Printing
• [805] SMDR Incoming Call Printing
Feature Guide References
2.22.1.1 Station Message Detail Recording (SMDR)
Tenant Service
• [001] System Speed Dialling Number
PT Programming Manual
65
Feature Programming References
•
•
•
[006] Operator Assignment
[320] ARS Mode
[711] Music on Hold
Feature Guide References
5.1.3 Tenant Service
TIE Line Service
• [500] Trunk Group Number
Feature Guide References
4.2.1 TIE Line Service
Time Service
• [101] Time Service Switching Mode
• [102] Time Service Starting Time
• [514] Time Service Manual Switching
Feature Guide References
5.1.4 Time Service
Toll Restriction (TRS)/Call Barring (Barring)
• [300] TRS/Barring Override by System Speed Dialling
• [301] TRS/Barring Denied Code
• [302] TRS/Barring Exception Code
• [501] TRS/Barring Level
• [509] TRS/Barring Level for System Speed Dialling
• [602] Class of Service
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
Trunk Access
• [400] LCOT/BRI Trunk Connection
• [401] LCOT/BRI Trunk Name
• [409] LCOT/BRI Trunk Number Reference
• [500] Trunk Group Number
Feature Guide References
2.5.5.3 Trunk Access
Trunk Answer From Any Station (TAFAS)
• [700] External Pager Floating Extension Number
Feature Guide References
2.17.2 Trunk Answer From Any Station (TAFAS)
Trunk Busy Out
• [511] Manager Assignment
66
PT Programming Manual
Feature Programming References
Feature Guide References
2.5.4.6 Trunk Busy Out
Trunk Call Limitation
• [472] Extension-to-Trunk Call Duration
• [473] Trunk-to-Trunk Call Duration
• [502] Trunk Call Duration Limitation
Feature Guide References
2.11.8 Trunk Call Limitation
Verification Code Entry
• [120] Verification Code
• [121] Verification Code Name
• [122] Verification Code Personal Identification Number (PIN)
• [123] Verification Code COS Number
Feature Guide References
2.7.6 Verification Code Entry
Virtual PS
• [690] PS Registration
Feature Guide References
5.2.4.6 Virtual PS
Voice Mail (VM) Group
• [601] Terminal Device Assignment
• [660] UM Group Floating Extension Number
• [661] VM Group Floating Extension Number
Feature Guide References
2.28.1 Voice Mail (VM) Group
Voice Mail DPT (Digital) Integration
• [201] Transfer Recall Time
Feature Guide References
2.28.3 Voice Mail DPT (Digital) Integration
Walking COS
• [005] Extension Personal Identification Number (PIN)
Feature Guide References
2.7.5 Walking COS
Walking Extension
• [007] DSS Console Paired Telephone
Feature Guide References
PT Programming Manual
67
Feature Programming References
2.24.3 Walking Extension Features
Wireless XDP Parallel Mode
• [515] Wireless XDP Parallel Mode for Paired Telephone
Feature Guide References
5.2.4.5 Wireless XDP Parallel Mode
68
PT Programming Manual
Notes
PT Programming Manual
69
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Web Site: http://www.panasonic.net/
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use
only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System
Networks Co., Ltd.
Panasonic System Networks Co., Ltd. 2014
PNQX6953ZA DD0714AH0