Download Telephone: 01262-212668, 211307 Fax: 01262

PT. B.D.SHARMA UNIVERSITY OF HEALTH SCIENCES ROHTAK.
Telephone: 01262-212668, 211307 Fax: 01262-212668, 211308
Website: www.uhsr.ac.in. and www.pgimsrohtak.nic.in.
CORRIGENDUM TO SHORT TERM TENDER NOTICE NO.11/2013-14
The closing date of Tender Notice No.11/2013-14 now revised will be 28.05.2014 upto
12.00 NOON and will be opened on the same day at 2.30 PM. The details of the items
included in different groups and their specifications uploaded with this Corrigendum only on the
above Websites will be considered.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
ANNEXURE –‘A’
GROUP
NO.
1.
2.
3.
4.
5.
6.
7.
8.
9.
DEPARTMENTS
ITEMS REQUIRED
MEDICINE
PUL. & CRITICAL CARE
MICROBIOLOGY
SURGERY
CARDIAC SURGERY
NEUROSURGERY
OBST. & GYNE.
EMERGENCY OT.
REGIONAL INSTT. OF
OPHTHALMOLOGY
PURCHASE OF ‘M&E’ AND ‘M&S’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
10.
11.
ENT`
ORTHOPAEDICS
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF VARIOUS TYPE OF INSTRUMENTS SETS
12.
ORTHOPAEDICS WORKSHOP:
PURCHASE OF MISC. ITEMS
13.
COLLEGE OF
PHYSIOTHERAPY
PURCHASE OF MISC.’M&E’ ITEMS
14.
15.
COLLEGE OF PHARMACY
PHARMACOLOGY
PURCHASE OF ‘M&E’ ITEMS
PURCHASE OF ‘M&E’ ITEMS
16.
RADIODIAGNOSIS
PURCHASE OF ‘M&E’ and ‘M&S’ ITEMS
17.
PATHOLOGY
PURCHASE OF ‘M&E’ and ‘M&S’ ITEMS
18.
CENTRAL STORE
(A)
(B)
19.
TELEPHONE EXCHANGE
20.
21.
22.
23.
24.
STATE INSTT. OF
MENTAL HEALTH
UROLOGY
PSYCHIATRY
PAED. MEDICINE
A&E DEPARTMENT
25.
MISC. DEPARTMENTS:
a)
b)
c)
PATHOLOGY
RADIODIAGNOSIS
CENTRAL
WORKSHOP
d) GLUCOSE MFG.UNIT
e) CENTRAL STORE
f) SKIN & VD
g) BOILER SECTION
h) MICROBIOLOGY
i) SKIN & VD DEPTT.
j) CENTRAL STORE
k) CENTRAL STORE
l) STATE INSTITUTE OF
MENTAL HEALTH
m) PATHOLOGY
n) PATHOLOLGY
o) MEDICAL RECORD
OFFICE
p) NEPHROLOGY
q) CENTRAL STORE
r)
CENTRAL STORE
Disposal of Condemned/Unserviceable store items
Disposal of condemned/unserviceable store items—Cobalt
Machine etc.
SHIFT/SETTING OF TELEPHONE LINES TO THE ALLOTTED
MDU BUILDING.
PURCHASE OF ZIM ITEMS
PURCHASE OF’M&E’ ITEMS
PURCHASE OF’M&E’ ITEMS
PURCHASE OF’M&E’ ITEMS
PURCHASE OF’M&E’ ITEMS
Purchase of Misc. items.
Purchase of Envelops for X-ray films
Purchase of Misc. Items.
Purchase of ‘M&E’ items
Purchase of ‘M&S’ items
Purchase of ‘M&S’ items
Purchase of ‘M&S’ items
Purchase of ‘M&S’ items
Purchase of ‘M&E’ items
Urgent Purchase of Ceiling Fans
Sale of card board boxes (Gatta) and Waste Mixed Glass
Purchase of ‘M&E’ items
Rate Contract For Purchase Chemicals To Be Borne for 2014-15
Rate Contract for purchase of IHC & DIF Markers for 2014-15
Purchase of Printed Envelop for Chief Minister Free Treatment Plan
Purchase of “M&E’ items
Rate contract for different consumables
Rate Contract for the purchase of Stationery Items
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
2
PT. B.D.SHARMA UNIVERSITY OF HEALTH SCIENCES ROHTAK
SHORT TERM TENDER NOTICE NO.11/2013-14 DUE ON 28.05.2014 UPTO 12.00 NOON
AND TO BE OPENED ON THE SAME DAY AT 2.30 PM
Sealed Short Term Tender from Manufacturers/Authorized Dealers are invited against following Items for
the University of Health Sciences. Tender Form for all Groups alongwith the instructions and technical details are
available on the University Website: www.uhsr.ac.in. and www.pgimsrohtak.nic.in. After downloading from
Website, the Tenderers may quote their rates alongwith fee of Rs.1,000/-for each Group, in shape of Demand Draft,
drawn in favour of the Controller of Finance, Pt.B.D.Sharma University of Health Sciences Rohtak. The last date of
submission of Tenders complete in all respects is 28.05.2014 upto 12.00 Noon
GENERAL TERMS & CONDITIONS FOR ALL THE GROUPS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Tender should be put in a sealed envelop. On each envelop “TENDER AGAINST TENDER NOTICE
NO.11/2013-2014 FOR GROUP NO. __________, DUE ON 28.05.2014 UPTO 12.00 NOON AND TO BE
OPENED ON THE SAME DAY AT 2.30 PM” should be written in capital letters. ‘TECHNICAL BID’
and ‘PRICE BID’ MUST BE SEALED SEPARATELY IN TWO SEPARATE ENVELOPS (marked as
Technical Bid and Price Bid in bold letters. These two envelops may be put in another bigger envelop and
duly sealed) —TENDER DUE ON 28.05.2014, duly page-marked alongwith Check-list.
Every tenderer will have to furnish a Certificate to the effect that their firm is not debarred by any
Central/State Govt./University for Public Sector Business, at the time of purchase/submission of Tender
Form. In case, at a later stage, if the tenderer found debarred, the tender against this Notice will be
rejected.
THE EARNEST MONEY SHOULD BE VALID FOR A PERIOD OF ONE YEAR.
The tenderer will quote their rates with a Rate Validity of atleast 12 months from the date of opening of
Tender and the rates validity may be extended for another six or twelve months.
The quantity may be increased/decreased or completely withdrawn at any stage of tender processing.
The tenderer must also quote their rates Net i.e. including customs duty (if applicable), %age of VAT/CST/ST
etc. clearly, in Words and In Figures, alongwith the required documents. The duties & taxes will be paid
as per actuals.
Any Tender not accompanied with the Processing Fee (Tender fee) of Rs.1,000/- per group and Earnest
money (as shown against each group), shall be straightway rejected and no correspondence in this regard
shall be entertained.
THE PROCESSING OF TENDER/RATE CONTRACT AWARDED MAY BE CANCELLED FOR ANY
OF THE ITEMS OF THE TENDER WHEN THE SAME IS MADE AVAILABLE BY AGENCIES
AUTHORIZED BY GOVT. OF HARYANA.GOVT. OF INDIA/OTHER STATE GOVTs.
The Tenderer should ensure that every machinery & equipment item will carry warranty/guarantee of 05
years (unless otherwise specified) and CMC will be for 03 years (unless otherwise specified) will be
applicable after satisfactory completion of warranty/guarantee period.
Complete generalized technical specifications of all the machinery & equipment items of the tender are
available on our websites: www.uhsr.ac.in. and www.pgimsrohtak.nic.in.
ANY ITEM/GROUP/ENTIRE TENDER MAY BE WITHDRAWN/CANCELLED AT ANY TIME
WITHOUT ASSIGNING ANY REASON.
The Performance Guarantee will be 5% of the cost of M&E items (unless otherwise specified) excluding
AMC/CMC of the approx.annual value of supply orders for the Rate Contracts for successful bidders.
The tendered will give an undertaking to furnish Performance Guarante @ 5% for the total period of
AMC/CMC after successful completion of warranty/guarantee.
THE ABOVE MENTIONED TERMS & CONDITIONS SHALL SUBSTITUTE THE TERMS &
CONDITIONS FOR THAT PARTICULAR CLAUSE IN THE TENDER FORM TO THE EXTENT IT
HAS BEEN SPECIFIED above.
THE TERMS & CONDITIONS SPECIFIED IN THE ITEM/GROUP CONCERNED SHALL
SUBSTITUTE THE TERMS & CONDITIONS FOR THAT PARTICULAR CLAUSE IN THE TENDER
FORM AND ALSO IF INCLUDED ABOVE TO THE EXTENT IT HAS BEEN SPECIFIED IN THE
ITEM/GROUP CONCERNED.
In case of any difficulty, contact the Sr. Professor I/c Purchase.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
3
TENDER FORM
PANDIT BHAGWAT DAYAL SHARMA UNIVERSITY OF HEALTH SCIENCES,
ROHTAK
INSTRUCTIONS TO TENDERERS
1.
Quotations must be enclosed in properly sealed envelops addressed to the ViceChancellor, Pt. B.D. Sharma University of Health Sciences, Rohtak by designation and
not by name.
2.
The quotation must be superscribed “Quotations against Tender Notice No.11/2013-14
due on 28.05.2014 (as called for in tender notice)” The quotations must reach in the
office of Vice-Chancellor before the last date mentioned in the tender notice.
In the even of quotations being submitted by a firm, it must be singed separately by each
member thereof or in the even of the absence of any partner it must be signed on his
behalf by a person holding a power of attorney authorizing him to do so, or in the case of
company the quotations should be executed in the manner laid down in the said
Company’s Articles of Association. The signatures of the quotations should be deemed
to be authorized signatures.
3.
All the columns of the quotations form shall be duly, properly and exhaustively filled in.
The rates and units shall not be overwritten. Quotations shall always be both in the
figures and words. The words “No quotations should be written across any or all the
items in the schedule for which a tenderer does not wish to tender”.
4.
Any Omission in filling the columns of “Units” and “Rates” shall together debar a
quotation from being considered.
5.
All corrections must be singed by the tenderers.
6.
Samples of the items where demanded must be sent in sealed cover/Box with the tender
alongwith Name, Address and Reference of the item. Such sample must be sent freight
paid or delivered free. All samples (except those against accepted quotations) may be
taken back by the supplier after 6 months of opening of tenders failing which the
samples will become the property of the University of Health Sciences Rohtak and no
claim thereafter will be considered. Loss of samples or damage or wear & tear or injury
by testing/ exposure/experiment etc. shall be no ground for compensation due to the firm
in any form.
7.
The tenderers shall deposit earnest money in the form of call deposit receipt pledged to
Vice-Chancellor.
The earnest money must accompany the tender form without which the offer will not be
considered. The said amount will be regarded as forfeitable to University of Health
Sciences Rohtak if the successful tenderer fail to supply the goods within the time fixed
by the Vice-Chancellor.
8.
The successful tenderers shall be required to deposit performance security of the contract
in the form of Call Deposit Receipt pledged to the Vice-Chancellor.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
4
2
(i)
(ii)
9.
10.
11.
12.
Where the value of the supply order or the estimated value of rate contract is up to Rs.20, 000/@5%
Where the value of the supply order or the estimated value of the contract is above Rs.20, 000/@2% of the amount of the order subject to minimum of Rs.1,000/- in the form of Deposit at call
Receipt.
In case the security exceeds Rs.10,000/- additional amount (over and above
Rs.10,000/- can also be deposited by the tenderers in the form of Bank Guarantee on
any scheduled Bank valid for a period of 6 months or more from the date of expiry or
the stipulated delivery period. The currency period of the Bank Guarantee shall be
extendable, if so desired by the Vice-Chancellor. The earnest money shall be
adjustable towards security.
The Vice-Chancellor will have the right to reject all or any of the quotation without
assigning reasons.
No tender will be considered unless and until all the documents are properly signed.
The quotations will be regarded as constituting an offer or offers open to acceptance in
whole or in part at the discretion of Vice-Chancellor.
In the event of tender being accepted the quotations will be converted into contract,
which will be governed by the conditions in pages 3 to 10 read with these instructions.
Read and accepted.
Signature of the Tenderer.
I/we hereby quote to supply the goods and materials specified in the under
written schedule in the manner in which and within the time specified as set forth in the
supply order at the rates given in Schedule below. the conditions on page 3 to 10 will
be binding upon me/us in the event of the acceptance of my/our tender.
I/we herewith enclose deposit receipt for a sum of Rs……………as security
money and should I/we fail to execute an agreement embodying the said conditions and
deposit security as laid down in the form within 10 days of the acceptance my/our tender.
I/we hereby agree that the above sum of security money shall be forfeited by the ViceChancellor.
SCHEDULE ‘A’ OF RATES
1. 2
3
Sr
ISI
Specification
No.
General
description
No.
Tender Rate
4
5
6.
Unit
Packing
Name of actual
manufacturer and
country of
manufacturer
E.& O.E.
All rates for deliver for………………………………………
Date the………………………Day of ……………………………………
Signature………………………………………………………………………………….
Address…………………………………………………………………………………..
N.B
: Please do not forget to fill in the all the above columns.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
5
1.
3
SCHEDULE ‘B’
Conditions of Contract
This contract is to last from……….To…………but in the event of any breach of the
agreement at any time on the part of the contractor may be terminated summarily by the
Vice-Chancellor, Pt. B.D. Sharma University of Health Sciences, Rohtak without
compensation to the Contractor.
Any change in the constitution of the firm shall be notified forthwith by the contractor in
writing to the Vice-Chancellor and such change shall not relieve any former member of the
firm from any liability under the contract.
No new partner/partners shall be accepted in to the firm by the contractor in respect of
this supply unless he/they agree to abide by all its items, conditions and deposit with the
officer sanctioning the supply a written agreement to this effect. The contractor’s receipt of
acknowledgement or that of any partners subsequently accepted above shall bind of them and
will be sufficient discharge for any of the purposes of the supply.
2.
The contractor will supply nothing but genuine articles described in column 2 of
schedule ‘A’ from time to time in such quantities as may be entered in the indents sent at
the rates set forth in column 3 for schedule “A” for use in the institution.
3.
The articles to be supplied under this order will be of the quality which is equal and
answerable in every respect to the specifications given in the list accompanying the
tender approved by Vice-Chancellor. The contractor shall be responsible for all
complaints as regards the quality. In case of dispute regarding quality for articles, the
decision of the Vice-Chancellor will be final and binding on the contractor. It will open
to the Vice-Chancellor dent to send samples submitted by the tenderer/contractor to any
laboratory for chemical analysis and the cost thereof will be borne by the
tenderer/contractor.
4.
The contractor will be responsible for damage or loss in transit and replace goods broken
or lost within 14 days from the notice thereof.
5.
Unless when specially ordered otherwise in the order accompanying the indent all goods
must be despatched within 14 days for the receipt of indent by the contractor.
6.
Condition as to time for performance whether laid down in the supply order or not shall
be regarded as the essence of the contract.
7.
The Vice-Chancellor or any other officer of person duly authorized in writing by the
Vice-Chancellor shall have the power to inspect the stores, before during or after
manufacture, collection, dispatch, transits or arrival & to reject the same of any part or
portion, if he or they be not satisfied that the same is equal or according to the sample
submitted by the contractor. The contractor shall not charge or be paid for supplied
reject as above and claim nor be entitled to payment for any damage that rejected
supplies may suffer from any harm whatsoever incidental to a full and proper
examination and test of such supplies. Government shall be under no liability whatever
for rejected supplies and the same will be at the contractor’s risk. Rejected supplies
shall be removed by the contractor within 14 days after notice has been issued to him so
such rejection, and failing such removal rejected goods will be at contractor’s risk and
the University of Health Sciences Rohtak may charge the contract rent for the space
occupied by such rejected goods.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
6
4
8.
Packing cases, containers, gunny packages etc. which may be used for purposes of
packing etc.which are delivered with stores will not be returned or paid for unless
specially stipulated and then also at contractor’s expense.
9.
(i)
With every dispatch of goods or materials, under this contract invoices, in
triplicate will be prepared by the contractor to be sent to the Vice-Chancellor &
one copy will be returned by the store officer, with the quantities or number
received duly noted thereon.
(ii)
Railway receipt will be forwarded to the consignee immediately after dispatch of
store should nay demurrage charges be incurred owing to delay on the part of the
contractor forwarding the railway receipt, the amount of such charges will be
deducted from their bill.
(iii)
The contractor shall dispatch material “Freight Paid” in all cases where the offer is
F.O.R. destination.
(iv)
All dispatch by rail will be made at railway risk (except where rates quoted are
F.O.R./destination) or as per instructions in the supply order. This is subject to the
condition that the materials are securely packed by the suppliers in sound
containers and the consignment is accepted by the carriers without any adverse
remarks as to the packing or the condition of the containers. In case of any adverse
remarks, the responsibility for the losses in transit will rest with the suppliers.
Subject to these conditions contractor will not be entitled to charge or be paid for
supplies broken, lost or damaged in transit. The Vice-Chancellor, will be the authority to
determine whether or not the breakage, loss or damage was caused through the contractor’s
negligence and the decision of the Vice-Chancellor, Pt. B.D. Sharma University of Health
Sciences, Rohtak or some other officer acting on his behalf shall be final and conclusive
against the contract. Such rejected supplies shall be removed by the contractor at his own
expense.
(v)
If during the currency of the contract the specifications of any article or articles to
be supplied there undergo change the contractor shall continue to comply with
demands for the supply of the said articles in accordance with new specifications at
rated to be mutually agreed to in writing at the time of such change. In default of
such agreement, the contract in so for as it relates to the said articles or articles
under respect of which no agreement has been arrived at, shall terminate but no
such change shall affect the supply of any other articles under the contract or
entitle the contractor to any compensation.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
7
10.
11.
5
In the even of withdrawal or discontinuance of any article and consequence ceasing of or
reduction in demand the contractor shall not be entitled to any compensation. The
University of Health Sciences Rohtak will, however make all reasonable endeavours to
give warning of any impending complete withdrawal or of any reduction seriously
affecting quantities likely to be required under contract.
(a)
The time and date of delivery of dispatch stipulated in a supply order shall be
deemed to be the essence of the contract and should contractor fail to deliver or
dispatch any consignment within the period prescribed for such delivery or
dispatch stipulated in the supply order, the delayed consignment will be subject
to 2% penalty per consignment per month recoverable on the value of stores
supplied. In case of Non-supply by the contractor, recovery will be made from
his pending bills or amount of Earnest Money deposited with Vice-Chancellor
Pt. B.D. Sharma University of Health Sciences, Rohtak. His security deposit
will also be forfeited.
(b)
No recovery of penalty will made if the indenting Officer accepts the delayed
supplies by extending the delivery period up to 2 weeks by recording in writing
that the exceptional circumstances were beyond the control of the supplier and
there was no loss to Government.
(c)
Where the delay on the part of supplier is of more than 2 weeks the matter of
extension of delivery period will be referred by the indenting Office to the ViceChancellor with a certificate that there are genuine reasons for delay on the part
of supplier and that no loss will result to the University of Health Sciences
Rohtak in case extension in delivery period is allowed. The case will be decided
on merits by the Vice-Chancellor.
(d)
On the failure of the supplier to make supply with extended period or otherwise
and the receipt of such information in the office of Vice-Chancellor Pt. B.D.
Sharma University of Health Sciences, Rohtak risk purchase at the cost of
suppliers will be made by the Vice-Chancellor within 6 months of the expiry of
the stipulated delivery period by inviting short term quotations from other known
suppliers. The difference of excess cost thus incurred will be recovered from the
suppliers from his pending bills, Earnest Money or security which ever is
available. The procedure will be adopted after serving registered notice to
supply stores within 15 days.
12
The contractor acknowledges that he had made himself fully acquainted with all
conditions and circumstances under which the supplies required the contract will
have to be made or furnished and with all the terms, clauses, conditions,
specifications and other details of the contract and the contractor shall not plead
ignorance of any of those as excuse in case of complaint against or rejection of
supplies tendered by him or with a view either asking for enhancement of any rates
regarding the contract or for evading any of his obligations under the contract.
13
No payment will be made in advance for any supplies under this order.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
8
6
14
(i) The contractor shall not:
(a) Assign or sublet contract without written approval of the officer sanctioning the
contract.
(b) Disclose details of the conditions governing this contract to unauthorized
persons.
(ii)
In the event of the contractor failing duly and properly to fulfill or committing
breach of any of the terms and conditions of this contract or repeatedly
supplying goods liable to rejection hereunder or failing, declining,
neglecting/delaying to comply with any demand or requisition or otherwise not
executing the same in accordance with the terms respect of this contract or any
other contract entered into by the contractor or any of his partner or
representatives there of with the University of Health Sciences Rohtak directing,
giving promising or otherwise to any person in the employment of the
University of Health Sciences Rohtak in any way relating to such officers or
person or persons office or employment or if the contractor or any of his
partners become insolvent or apply for relief as insolvent debtor or commence
any insolvency proceedings or make any composition with his/their creditors or
attempts to do so then without prejudice to the University of Health Sciences
Rohtak rights and remedies otherwise, the University of Health Sciences Rohtak
shall be entitled to terminate this contract forth with and to blacklist the
contractor and purchase or procure or arrange from Government stocks or
otherwise at the contractor’s risks at the absolute discretion of the ViceChancellor as regards the manner, place or time of such purchases or such
supplies have not been supplied or have been rejected under this agreement or
are required subsequently by the University of Health Sciences Rohtak there
under and in case where issues in replacement are made from Government’s
stock or supplies, the cost or value of such stocks or supplies together with all
incidental charges or expenses, shall be recoverable from the contractor on
demand and the contractor shall not be entitled to benefit from any profit which
may thus accrue the Government/University of Health Sciences Rohtak.
The termination of this contract in whole or part under these conditions shall be
affected by the acceptance, meanwhile or subsequently, or supplies accepted or made at
any station whether in ignorance of the termination or otherwise.
15.
If any question, difference or objection whatsoever shall arise, in any way connected with
or arising out of this instrument or the meaning or operation of any part there of or the
rights: duties or liabilities of either party than save in so or as the decision of any such
matter herein before provided for and has been so decided that every such matter including
whether its decision has been otherwise provided for and or whether it has been finally
decided accordingly or whether the contract should be terminated or has been rightly
terminated in whole or part and as regards the rights and obligations of the parties as a
result of such termination shall be referred for arbitration to any officer appointed by
VICE-CHANCELLOR and his decision shall be final & binding and where the matter
involves a claim the amount if any awarded in such arbitration shall be recoverable in
respect of the matter so referred.
16.
If the price of a contracted article is controlled by Government the payment will in no case
be made at higher rate than the controlled rate.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
9
7
In WITNESS THEREOF the parties have here upto set their hands on the dates indicated below.
1.
(in the case of a Firm)
Signed by the above named firm of ……………………………………………………..
through……………………………partner of the firm…………………………………..
Date……………………………….Signature……………………………………………
2.
(in the case of company)
The seal of the……………………..company, limited, was affixed by virtue of the
resolution of the Board No……………………………………Dated……………
the……………………………………………day
of………………………2011……………
SEAL
Sr.Professor I/c Purchase
Dated……………
Signature
Secretary’s
Signature
Dated……………
(In either case)
(In either case)
In the presence of
Signature
Address
Description
Signature
Address
Description
Signed by……………
Signature of………….
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
10
8
ANNEXURE ‘A’
CONDITIONS WITH TENDER FORM
1. Trade discount should be quoted separately.
2. Offer with price variation clause will not be accepted.
3. Sales Tax, Inter State Tax or any other chargeable Excise Duty/Custom Duty must be specifically
mentioned separately, otherwise offer will be considered inclusive of all such taxes.
4. Any tender which is not on the proper tender form and received late may not be considered.
5. No offer will be considered unless accompanied by prescribed earnest money, except in case of
firms registered with the Director, Supplies and Disposal, Haryana.
6. The conditions of contract (Schedule ‘B’) attached to the tender form be returned duly signed
along- with the Schedule ‘A’ and in case of non compliance the tender may be ignored.
7. Tender which are not strictly according to the specifications laid down in the Schedule ‘A’ will
not be considered. Unless a deviation from the specification/Delivery period given in Schedule
‘A’ is pointed out by the tenders specifically. It will be presumed that offer confirms to the
specifications/delivery period as laid down in the Schedule ‘A’
8.
(a)
Tender must be supported by a sample where asked for, failing which it will not be
considered.
(b)
(c)
The tender should clearly state that the sample submitted confirms to the specification
laid down in the Schedule ‘A’ failing which tender will not be considered.
In case the date of opening falls on Holiday, Gazetted or subsequently declared the
tender will be opened on the next working day following the close day.
9. 90% payment can be made through bank against R/R supported with satisfactory inspection note
and balance within 30 days of receipt of stores provided the stores are booked at railway risk. The
bank commission shall be borne by the contractor.
10. Prices should be for supply of the material in safe conditions F.O.R. destination failing wich offer
may be ignored.
11. The Vice-Chancellor Pt. B.D. Sharma University of Health Sciences, Rohtak does not bind
himself to accept the lowest tender and reserves to himself the right to reject any or all tenders
without assigning any reasons.
12. All disputes will be settled within the Jurisdiction of the Head Quarters of Pt. B.D. Sharma
University of Health Sciences, Rohtak
13. The quotations will be regarded as constituting an offers open to acceptance on whole or in parts
or parts till the date as indicated in the Schedule ‘A’
14. The offers should be typed or written in Ink. Offers in the pencil may be ignored.
15. The firm registered under quality marking Scheme in Haryana State should furnish attested copies
of their registration certificate for the tendered goods in supports of their registration for such
goods.
16. Preference would be given to the Haryana Quality Marked goods and goods certified under ISI
certification Marking Scheme.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
11
17. The samples/test report wherever required shall be submitted by the date and time fixed for the
receipt of the tender, samples received after fixed time and date may be ignored. This condition
will also be applicable to outside tenderers.
9
18. The registration certificates of which attested copies are attached with quotations should be
certified by the tenderers to be valid on the day of opening of tenders.
19. An under taking should also be given by the tenderers to the effect that if validity of the
registrations certificate expired after the day by opening of the tenders due to closing of the
factories or some other factors, they shall report the fact to this office immediately.
20. In case where the tenderers offers machinery and equipment for which licence is required under
the industries (Development and Regulation) Act. 1957, it would be certified by him that he is in
possession of such valid licence on the date of opeing of the tenders under the aforesaid Act, for
the manufacturer of machinery and equipment so offered if he is a manufacturer. If he is not a
manufacturer, it should be certified that he is an authorized representatives of licenced
manufacture quoting the name and address of such Licence holder and the licence number.
21. The tenderer will give complete addresses of its sister concerns along with name of partners with
their complete address (es) and extent of share.
22. It should also be ensured that the tender/quotations has been singed by an authorized person. His
name, designation and address should be given in capital letters.
23. Offers are to be submitted in duplicate along with only tender form. Offers not received in
duplicate may be ignored. The duplicate copy of the offer should be carbon copy of original
tender and it must telly in all respects with the original.
IMPORTANT INSTRUCTIONS OF TENDER NOTICE
1.
Please quote the name of the manufacturer and also mention. Trade/Brand name of your
products.
2.
Please quote your rates only if you are manufacturer/authorized distributor/dealer of
item to be quoted by you.
3.
Certificate from original manufacturer to this effect may be attached that the “Rates
charged by you are not higher than the rates being charged from any other
Government/Semi Government/Autonomous bodies DGS&D, New Delhi.”
4.
Tenders received late will not be considered.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
12
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
10
Rates quoted should be F.O.R. U.H.S., Rohtak
Earnest money has been mentioned against each group of this tender and shall be
required in shape of Call Deposit Receipt/FDR with validity of minimum one year
drawn on any Scheduled Bank/Nationalized Bank duly pledged in favour of Controller
of Finance, Pt. B.D. Sharma University of Health Sciences, Rohtak (Demand Draft and
Banker’s Cheque will not be accepted).
Tenders not accompanied with requisite earnest money/tender feel will be rejected.
Earnest money already deposited against any previous tender will not be considered.
Quantity can be increased/decreased.
All cutting/over-writing in the tender should be attested by the tender with his signature.
Literature/Catalogue for all the quoted items/equipments should be attached with the
tender.
Properly sealed samples should be submitted to the Store Officer, University of Health
Sciences, Rohtak against proper receipt. The tenders without required samples will be
ignored.
The successful tenderes shall be required to deposit security @5% of the value of goods
in the form of call deposit Receipt pledged in favour of Vice-Chancellor, Pt. B.D.
Sharma University of Health Sciences, Rohtak. In case the security exceeds Rs.10,000/then the additional amount over and above Rs.10,000/- can also be deposited by the
tendered in the form of Bank Guarantee on any Scheduled Bank valid for a period of one
year or more from the date of expiry of the stipulated period.
Cost of installation and commissioning charges, if any, may be mentioned. The firm
should also mentioned whether any infrastructural facilities are required for installation
of their equipment e.g. Water, 3 phase electricity, AC or any P.W.D. work etc.
The firm should give year wise rates of Annual Maintenance Contract for equipments
costing more than Rs.10,000/- and should agree to provide such maintenance for ten
year after expiry of Guarantee period.
The firm should give rates of spares/consumable which are likely to be used during next
ten years.
The firm should submit a latest authority letter from the original manufacturer of
equipment. Authority letter order than one year will not be considered.
For Medical equipment the firm should submit a list of user organizations and should
submit a certificate of satisfactory performance and after sales service from such
organizations.
Delivery period: Tenderers should quote earliest delivery period but not; exceeding 8-12
weeks. If delivery period is given more than 8-12 weeks than rates can be ignored.
For imported equipments the firm should also quote rates in Indian Rupees and should
agree to take payment after receipt and satisfactory installation of machine. None
manufacturing in India (NMI certificate) and Custom Duty Exemption Certificate
(CDEC) will be provided by this Institution. Rates quoted should be F.O.R, U.H.S,
Rohtak and custom clearance will be got done by the firm.
Conditional tenders will not be accepted and rates quoted should valid upto 180 days
from the date of opening of Tender. Withdrawal of rate, amendments/modifications
during the validity period of rates shall be considered as unbusiness like behaviour
which will result in forfeiture of earnest money and/or penal actions such debarring of
firm for further business.
Note: If these conditions are not fulfilled their/your tender is likely to be ignored.
Sd/CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
13
DIRECTOR
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
14
TENDER GROUPS
1 to 25 (including Sub Groups)
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
15
GROUP NO. 01
PURCHASE OF ‘M&E’ AND ‘M&S’ ITEMS---MEDICINE DEPARTMENT
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
MACHINERY & EQUIPMENTS:
Sr. Name of item with specifications
1
MULTICHANNEL ECG MACHINE (3 channel)
Qty.
((Nos.)
07
Specifications:
It should be a 3/6/12 lead automatic interpretive electrocardiograph recorder with LCD display. It should be
mains operated with provision of built in rechargeable batteries and complete alphanumeric keyboard with
following specifications:
•
•
•
•
•
•
•
•
•
Computer controlled thermal dot array printer
Writing speed 5-50 mm/sec
Sensitivity 0.5-2 mv/5-20 mm
Report formats: 12 lead and user selectable format
Common mode rejection ratio: 100 dB or more
Patient safety: current leakage less than 10 uamp
Recording paper: thermal sensitive, Grid paper
Should have interface for PC compatible software with capability to store upto 100 EKGs.
Alarms/alert for lead disconnection
Standard Accessories include:
- 10 lead patient cable with banana plugs, clip and chest electrodes
- Built-in rechargeable battery lasting for > 2 hours, after full charge
- Power cord (10 feet)
- Suitable CART/Trolley to be quoted as part of offer
Two extra patient cables to be quoted as part of EKG machine. 10 packets of compatible EKG paper
to be supplied along with each machine
PRINTER:
Digital Array Printer at a speed of 25 and 50 mm/sec
PAPER: Thermal paper preferably A4 with Grid (commercially available in India)
REPORT(ANNOTATED):
•
Basal 12 lead EKG with interpretation. Other formats 3x4, 6x2 formats.
•
Averaged 12 lead EKG complexes of resting EKG preferable Rhythm lead (upto 12 leads)
Note:1. Service contract (both AMC/CMC) for 5 years with details of terms and conditions of repair and payments must
be submitted (after expiry of 2 years warranty). Battery should also be under warranty fo 2 yrs.
2. Service manual, operation manual are essential.
3. These are minimum specifications and offers with additional or higher specifications shall also be considered.
Demonstration of EKG machine is mandatort.
4. Warranty period for two years after satisfactory installation shall include patient cable, Batteries.
5.Third party inspection of goods (imported items) at the time of dispatch shall be to the charge of supplying firm
These specifications quoted are of generalized nature.
3.
NEBULIZER:
08
1.
2.
3.
4.
5.
6.
7.
8.
9.
Electricity supply should be 220 volts A/C.
Nebulizer air flow should be >5.5 1/min.
Compressor air flow should be >10 1/min.
Compressor should be able to generate a pressure of > 250 kpa(2, 5 bar)
Size should be compact and light weight.
Noise level should be <56 dBa.
Capacity of the chamber should be 5-6 ml.
It should be Class-II devise (double safety insulation) and Type B
Device (device with specific protection against electrical hazards) and should be CE certified.
10. The apparatus should have 2 years compressive warranty.
…2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
16
-24
2
08
GLUCOMETER:
1. It should be based on Glucose Oxidase method.
2. Should give results almost equivalent to plasma glucose.
3. Preferably with single strip supply.
PORTABLE ECG MULTICHANNEL MACHINE:
1. Simultaneous 12 lead ECG acquisition
* Detailed 12 lead ECG measurement (intervals, amplitudes & axes) software
* High Resolution LCD Screen
* Alphanumeric Keypad
* Direct Function Keys for easy operation
* Multiple print formats from integrated 3 channel thermal printer
* Mains & battery operated
* Battery capacity: 3 hours of normal use
06
2.
3.
Recoder- High quality recorder digital recorder in-built
Paper – Minimum 80 mm or more grid paper for recording on bed side easily available
commercially
4. On board Memory to store upto 40 ECG recordings,
5. Detailed Interpretation Software application
6. Two extra patient cables to be quoted as part of EKG machine. 20 packets of
compatible EKG paper to be supplied along with each machine
7. One suitable carrying case for each EKG machine to be supplied along.
Note:1. Service contract (both AMC/CMC) for 5 years with details of terms and conditions of
repair and payments must be submitted (after expiry of 2 years warranty). Battery should also be
under warranty fo 2 yrs.
2. Service manual, operation manual are essential.
3. These are minimum specifications and offers with additional or higher specifications shall
also be considered. Demonstration of EKG machine is mandatory.
4. Warranty period for two years after satisfactory installation shall include patient cable,
Baterries.
5.Third party inspection of goods (imported items) at the time of dispatch shall be to the charge
of supplying firm
5
These specifications quoted are of generalized nature
AMBUBAG:
1.
2.
3.
4.
5.
6.
7.
06
0
Should have silicon rubber below to withstand to autoclave at 134 C .
Should provide with autoclavable face mask and oxygen connecting tube, a carry pouch.
It should have a bag volume of 1700 ml and a variation of + 100 ml will be accepted.
Expiratory resistance should be 2.2 cm of water.
Inspiratory resistance should be 3.3 cm of water.
It should have controller flow rates and ventilation, and with reduced airway pressure.
Should have a port in the bag to connect oxygen with reservoir bag.
6
LARYNGOSCOPE WITH ATTACHMENTS
06
7.
EXTERNAL TEMPORARY CARDIAC PACING UNIT:
Specifications:.
Portable Unit- Single or dual chamber pulse generator
Rate Range : 30 to 180 ppm, continuously
Adjustable in 1ppm increments.
Output Current Range: 0.1 to 20 Ma
Constant current ( to a maximum of 18 volts)
Continuously adjustment.
Sensitivity Range: 1.0 mv to asynchronous continuously adjustable
Pulse width: 1.8mv
Refractory period : 250 ms nominal
Weight: approximately 500 g with battery
Dimensions: 1.5 in (3.8cm)x3in(3.8cm)x3in (7.6 cm)x5.7in (14.5cm)
Power supply: One 9-volt alkaline battery (commercially available).
These specification quoted are of generalized.
01
.
..3.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
17
-38.
COMPLETE STRESS TEST SYSTEM,:
01
A. SYSTEM:
Window based computerized system with*iCore Intel processor (5 or 7) of reputed make like
Dell, IBM, Compaq, HP, ACER etc. RAM 4 GB Hard Disc Drive (HDD): 500 GB; 101/106
Keys Enhanced Alphanumerical keyboard; Trackball/Scrolling Mouse; One parallel and one
Serial Port, complete multimedia kit including 50 DVD and DVD Rom drive and DVD and
CD writer.
B.DISPLAY UNIT:
*
17” or more SVGA Flat Color Monitor (Nonfade Type)
*
Resolution 600 x 800 or more
*
Display of- Standard Exercise Protocols (inbuilt and to be built)
-Treadmill Speed
-Grade of Elevation
-Met Loads
-Heart Rate (40-240)
-Blood Pressure with software for direct automatic entry shall be
preferred.
-ECG leads- 6 channel or more- User selectable even during the test
-Reference averaged complex- User selectable
-ST- Segment value (- 10 mm to + 10 mm)
-Display Update every 10 seconds
-ST- Profile of all the twelve leads
-J point adjustment during test 0.100 msec. Or more
-Superimposition scan of basal and current for all leads.
C
PRINTER
Latest version of HP Laserjet Printer not less than 300 dpi. One printer cartridge
extra to be part of equipment
D.
PAPER Laserjet Printer compatible-Printed Grid Paper Sheets (commercially available A4 sized)
5 packets should accompany equipment
E.
Treadmill
System controlled interphase Treadmill of reputed make with :*
Speed
0.10 MPH/0.15 KPH
*
Elevation
0.25 % Grade
*
Motor
2 HP (DC 220-240 V)
*
Load Capacity
upto
150 Kg
*
Walking Belt
45 cms x 150 cms
*
Walking Platform 15 cms above Floor Level
F.
REPORT (ANNOTATED)
*
Basal 12 lead EKG with interpretation
*
Averaged 12 lead EKG complexes during exercise and post-exercise phases
selectable to every one minute settings.
*
Additional copies of whole report and full disclosure also possible to record
*
User selectable report format printout specially for ST segment and ST slope
*
Storage facility for at least 100 TMT report.
Note:
1.
2.
3.
4.
5.
6.
7.
8.
One Spare Stress Cable with replaceable patient connecting leads must be quoted
as part of offer. 10 packets of compatible TMT paper to be supplied as part of offer
BP recording unit if available shall be preferred
UPS (1 KVA) 4/5 KVA stabilizer (of standard make) for treadmill shall be given along
with the system
The Treadmill Unit should also be independently operable without control through the
computer.
Waranty of 2 years - to also cover peripheral viz Laser printer, cartridge, Patient
cable/Module. UPS
Starting Speed of belt should be not more than 1 MPH/ 1.5 KPH
Service Contract (AMC/CMC) for 5 years with complete details of terms and conditions
of repair and payments year wise beyond the warranty period of 2 years.
Firm with wide spread network and service facility shall be preferable.
…4.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
18
-4-
MATERIAL & SUPPLY ITEMS:
1
2
3.
4.
ECG JELLY (250 gm):
The jelly should be standard make and a good quality supplied in ready dispensable
plastic container. The jelly should not dry on storage and should be on uniform
consistency. The choice of jelly shall be made on the basis of sample supplied and
tested. It should be natural in reaction and should not change colour on storage.
A4 SIZE Z-FOLD THERMAL PAPER FOR MULTICHANNEL ECG MACHINE
MODEL- Eli-250 MORTARA (one packet in 200 sheets each):
High quality paper for above machine with grid area 200 mm x 203 mm ( 11” x 8”)
with vacant area in upper part. The sample to be provided. Its selection will depened
on the quality of record and provision of an sensor mark on the left lower and of paper.
Paper should be chemically coated with light coloured grid.
A-4 Z FOLD THERMAL PAPER FOR MULTICHANNEL ECG MACHINE
MODEL: WIPRO-GE MAC-1200 (one packet in 200 sheets each)
High quality paper for above machine with grid area 297 mm x 210 mm. The sample to
be provided. Its selection will depened on the quality of record and provision of an
sensor mark on the left lower and of paper. Paper should be chemically coated with
light coloured grid.
DISPOSAL ELECTRODES (Liquid gel only):
Should be standard make, good quality adhesive liquid gel with pencil sharp ECG trace.
The electrodes suitability to be decided after actual use on patients.
500 BOTTLES
200 Pkts.
400 Pkts.
10000 Nos.
5
TMT
PAPER A4 SIZE)200 sheets per pkt.):
The paper should be standard make. It should record pencil sharp tracing. The quality of paper to
be decided from the sample provided by actually records on TMT machine by technical
committee and the department of Medicine. The grid should be light coloured pink.
200 Pkts.
6
7.
Rubber teat (for Chest & ECG electrodes)
Z-fold A-4 size paper 210x280 mm (Sensor marks in upper left corner required
for Schiller AT-2 ECG Machine (80 GSM --200 sheet per pkt.
High quality paper for above machine with grid area 210 mm x 280 mm. The sample to
be provided. Its selection will depened on the quality of record and provision of an
sensor mark on the left lower and of paper. Paper should be chemically coated with
light coloured grid.
300 Nos.
500 Pkts.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
19
GROUP NO. 02
PURCHASE OF ‘M&E’ ITEMS---PULMONARY & CRITICAL CAE MEDICINE
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
Name of item with specifications
1
SIX MINUTE WALK TEST SYSTEM SPECIFICATIONS:
6 Minute Walk Test instrument for recording patient’s parameters to access functional capacity
of a patient in compliance with ATS/ ERS requirements like
Distance Walked (should be measured and not estimated Time
Respiratory Frequency
SpO2 (Blood Oxygen Concentration)
Heart Rate etc.
The Minute Ventilation, HR, RR and Oxygen Saturation should be measured and recorded in
real time through all the phases of the test.
The system should be supplied with a Rechargeable Li Ion battery pack, a Simple Windows
Based Software and required accessories like SpO2 finger clip sensor for integrated SpO2
measurement, Reusable Oro-nasal Mask (small/medium/large) Oro-nasal flow sensor with
disposable 50 airway caps. USB Stick/SD bacvk-up memory data card, Battery Charger,
Snap fit Belt, USB cable for data transfer to computer and a carry case for easy handling and
storage of the system.
The system should be CE (European) & US FDA approved marked to medical devices
directive (CE93/42 & 47/2007). It should be an approved Class – I Active Medical Device.
Including a compatible branded Laptop , Colour Laserjet Printer. 9IiincluNincluding
inIN47/2007007, CEI EN 60601-1.
SLEEP SCREENING SYSTEM:
The Sleep Screening System should be a state of the art system and preferably a light & portable
unit with following features:
2
•
•
•
•
3
•
•
•
•
•
•
•
02
It should be able to record Nasal Airflow (preferably Pressured based), SpO2 & Heart
Rate, Breathing Effort (Preferably RIP), Body Position
Should be able to operate on Rechargeable AA batteries
The Analysis Software should have facility to generate a report with numerical and
graphical representation showing AHI/RDI Index, De-saturation, Central Apnea etc..
The Software should be Windows Based
AUTO-CPAP:
The system should have the ability to deliver different level of pressures as per the requirement of the
patient during Sleep with following features:
•
•
•
•
Qty.
((Nos.)
02
02
Pressure Range from 4 CmH2O to 20 CmH2O
The system should have compensation for Mask level resistance
The system should have suitable technology to prevent Rain outs in the mask and Tubing
The system should have the facility to provide pressure relief both during End of Inhalation and
active exhalation
Data Storage facility – SD Card
Should detect RERA and manage the same effectively
Suitable Software for downloading of data and produce a proper report
The Report should have the last nights Flow data in graphical format
The software should have the ability to mark periodic breathing in the report
The equipment should have an warranty of at least 2 years
The principal Company should have their service center in India
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
20
GROUP NO. 03
PURCHASE OF ‘M&E’ ITEMS---MICROBIOLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1.
Name of item with specifications
BIOLOGICAL SAFETY CABINETS:
Type: BIOSAFETY CABINET, CLASS II B
The basic equipment shall consist of exhaust HEPA filter,‘Supply HEPA filter, HEPA
filter for supply air, negative pressure exhaust plenum, front opening sash with either
counter weight of motorized movement, suitable blower assembly, necessary lighting,
indicators and controls for the cabinet. The equipment should be mounted on a stand with
leveling feet. The exhaust plenum should be under negative
pressure, hard ducted to the outside.
Use of the Equipment: - Transfer of microorganisms to media containers.
HEPA FILTER: Face dimensions: 4ft. (L) X 2ft. (W) X 6ft .
The HEPA filter should have rated efficiency of 99.97% (or better) at 0.3 microns to
provide product protection of Class 100 or exceeding Class 100 requirements of Federal
Standards 209E or equivalent ISO within the work area.
Face Velocity: At least 100 fpm
Light Intensity at work surface: 800 lux or more over the entire work surface.
Noise level : <70 dBA.
UV germicidal lamp intensity: >40 microwatt/sq.cm over the entire work surface.
Construction : Main body, side and rear panel: Electrogalvanized Steel or Mild Steel, oven
baked epoxy powder lamps for blower motor, florescent lamp and UV lamp.
Differential pressure gauge : Scale display in cms of water
Electrical protection : The LAF should be fitted with earthleakage circuit breaker (ELCB)
Other fittings required for Attaching auxiliary services :
Electrical outlet socket (5 ampere rating) qty: 2 nos.
Prefilter :- one
The Biosafety Cabinet should be tested and comply with the following requirements (at
site):1. Down flow velocity and Volume Test.
2. Inflow Velocity Test.
3. Airflow Smoke Pattern Test.
4. HEPA Filter Leakage Test.
5. Cabinet Leakage Test.
6. Electrical Leakage : Ground Circuit Resistance and Polarity Test
7. Lighting Intensity Test.
8. Vibration Test.
9. Noise Level Test.
10. UV Lamp Intensity Test.
11. Alarms and indicators test (if provided).
12. The differential pressure gauge should be calibrated.
Spare accessories : HEPA Filter (one)-dimensions same as above, Prefilters (two).
Equipment quoted should comply with Indian Standards Institution Guidelines or any other
National or International Guidelines.
Qty. ((Nos.)
2.
AUTOCLAVE (Vertical):
With water level indicator, pressure gauge, steam release cock, spring loaded safety valve,
Triple walled construction, all the three walls are made of thick high grade stainless steel
sheet of SS-304 grade.
The lid made of stainless steel sheet, Unit fitted with Double safety radial locking system
with paddle lifting device, made of MS chrome plated, with builtin safety valve, pressure
gauge, pressure release valve
and water level indicator. Pressure adjustable from 5 psi to 20 psi with an accuracy of +/- 1
psi, with automatic pressure control switch. Supply complete with stainless steel basket,
chord and plug.
02
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
02
21
3.
Working Chamber: Height x Internal
Diameter:500mm x 300mm Electrically heated by immersion type heaters bearing ISI
mark, to work on 220 volts single phase 50 cycles. The pressure inside the chamber is
variable from 5 psi. to 20 psi..
Working Temperature : 121° C, Hydrostatic Pressure : 2.5 kg/cm sq. ( 35 psi ), stainless
steel steam release valve, spring loaded safety valve of stainless steel (grade SS-304),
water inlet and water valves, water level indicating gauge glass with stainless steel guard,
pressure gauge, electrical control box, fitted with toggle switch, indicating Neon lamps and
steam release valve, foot paddle lifting device.
Automatic Pressure Control Switch - To cut-off the current from the heating elements,
when the desired/set pressure value level is attained inside the chamber and restarts the
mechanism once the pressure inside
the chamber falls from the desired level.
Automatic Water Cut-off Device – To protect the heaters from running dry and to ensure
that the machine is automatically switched off in case the desired water level falls below
the prescribed level.
Temperature Indicator to indicate the temperature inside the chamber.
Timer with Alarm System - To regulate the
sterilization time of the media to be sterilized with a buzzer
Applications:1) For effective sterilization for smaller work load.
2) For decontamination of infected material
prior to its disposal.
3) For faster work in the laboratory.
The apparatus should confirm to national or
international standards with latest amendments covering Markings, Safety
requirements with recommendations of safe
operations from any reputed firm with ISO
9001:2000 & CE Certification. Voltage
regulator of appropriate rating to be included to cope with 160-260 V.
Note: 6 Nos. Extra gaskets and 6 Nos. Extra elements should be provided
ELECTRONIC BALANCE:
General purpose table top laboratory balance,
Stainless Steel, 220-230 V, stainless steel platform,keypad auto calibration function, auto
off, battery life of at least three months after installation, overload and under load, low
battery LCD/LED indicator.
Range: Wide range:
Capacity :
0.01 – 600 gms,
0.01-4000 gms
02
Resolution: 0.01 gms, Accuracy 0.01gm, Repeatability (SD): 0.01 gm., pan diameter 8x8
inches, AC adapter. Equipment quoted should comply with Indian Standards Institutions
Guidelines or any other National or International Guidelines. Voltage regulator of
appropriate rating to be included to cope with 160 – 260 V
4.
INSPISSATOR:
A shallow polish stainless tray rested inside a tank containing water. The whole undersurface of the
tray is in contact with water at a constant temperature which ensures that the temperature of the
McCartney bottles with media is also constant. The surface of the tray is a series of sloping steps (at
9 degree angle
above the horizontal) and will hold 162 universal containers. A blanket is placed over the containers
to exclude draughts and a quilted cover provides thermal insulation: both blanket and quilt are made
from insect-resistant materials. The temperature of
the water under the tray is controlled by a digital immersion thermostat. Accuracy and reproducibility
of set temperature are ensured with the digital display
of actual and, at the touch of a button, set
temperature. The control unit is mounted on a bridge plate over one end of the bath, from which
heater, stirrer and temperature sensors project down into the bath. All moving parts are incorporated
in the control unit which removable for servicing. The tray and tank are made of polished stainless
steel and are
fitted in an outer case of laminated wood. A constant level device is fitted is fitted to maintain the
water level despite evaporation losses. Specifications: Std temperature: 85c;
Operating temp. range: ambient +5 to 90C.;
temperature display: LED; Display resolution: 0.1c; Uniformity: tray surface + or - 0.7c;Heater
power: (approx.)1.4Kw, 230V; Tank capacity: (approx.)45
lit; Heat up rate 20 to 85 c; 3.5 hours; working area:1eng/width: (approx.) 820/594mm; overall
dimensions (approx).: 1/w/h: 1040/600/380mm; Over
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
02
22
temperature protection: Fixed cut-out; Electrical power: 220-240V 50/60 Hz, 1.5kW(approx.) ,
Approx.weight: 25-35 kgs
Voltage regulators of appropriate rating to be included for each item to cope with 160-260 V. Note :
6 Nos. Extra elements should be provided
5.
HOT AIR OVEN:
Thermostatically controlled, temperature range ambient to 2500c with fine and coarse
adjustment, Memmert type, with fan, digital display, approx.overall size 81 cm (H) x 58
cm (L) x 71 cm (W), internal size 46 cm (H) x 40 cm (W) x 35 cm (D)
stainless steel (SS) interiors with supports on three sides for adjustable shelves of size 38
cm x 34 cm, number of shelves: 3,
Fan convection to ensure uniform temperature, fitted with load indicator and safety
thermostat take over indicator lamp. Temperature variation +1oC,LCD/LED indicator. The
apparatus should confirm
to IS6365-1971(Reaffirmed 2006)with latest amendments in Indian Standard Specification
for Laboratory Electric Ovens or equivalent
National or International Standards covering Markings,tests and Safety requirements
Voltage Regulator of appropriate rating to be
included to cope with 160-260V
Note : 6 Nos. Extra elements should be provided
02
6.
DEEP FREEZER UPRIGHT MODEL:
CFC free high efficiency double refrigeration system for cooling and freezing filled in the
bottom.
Temperature: 0oC-86oC + - 0.5oC
Temperature Control:
(i) Digital temperature controller
(ii) Microprocessor Control/Microcontroller-for temperature setting
(iii) Alarms for-Voltage, Over heat, Over cool
Size: 300 litres with minimum 3 Stainless Steel, rust free shelves. Fixed in casters for easy
maneuverability.
Electricity: 230 volts AC, 50Hz single phase.
Refrigeration system:
Heavy-duty maintenance free refrigeration system with hermetically sealed refrigeration
compressors and reliable cascaded refrigeration to minimize noise
and vibration. Air-cooled with security lock to prevent unintentional switch off. Short
cooling time of 4 to 5 hours at 400C ambient temperature. The equipment should be of
continuous duty and frostfree.
Access port for CO2 back up.
Audiovisual Electronic Alarm System independent of power supply
Electrically heated doors for quick opening of frozen doors.The apparatus should confirm
to Indian Standard Institution
Guidelines with latest amendments in Indian
Standard Specification for Laboratory Deep Freezers or equivalent National or
International Standards covering Markings, tests and Safety requirements.
Voltage regulator of appropriate rating to be
included to cope with 160-260 V
VORTEX MIXER:
Adjustable speed: 100 to 3,000 rpm, continuous and intermittent “touch-control” modes,
220-230 Volts,
AC, 50HZ; Cup heads size: 25 mm dia. x 22 mm deep for mixing contents in McCartney
bottles.,Heavy cast-metal base and suction cup to assure stability, prevent “walking”.
Equipment quoted should comply with Indian Standards Institutions Guidelines or any
other National or International
Guidelines. Voltage regulatorof appropriate rating to be included to cope with 160-260V
INCUBATORS:
01
7.
8.
02
04
(i) Stainless steel make, inner full length plexi-glass door.
(ii) Triple wall with special grade glass wool
insulation
(iii) Long lasting stainless steel tabular heaters with fins
(iv) Temperature range, ambient +5oC to 80oC X ±0.1oC resolution Controller/Digital indicator for
Temperature Size in mm approximately (of inner chamber):700(W)x900(H)x650(D), , Capacity:- 15 cu. ft. and door swing 65 cms. The apparatus should
confirm to Indian Standard Institution
Guidelines with latest amendments in Indian
Standard Specification for Incubators or equivalent National or International
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
23
Standards covering Markings,tests and Safety requirements Voltage regulators of
appropriate rating to be included for each item to cope with 160-260 V.
Note : 6 Nos. Extra elements should be provided.
9.
HOT PLATE:
03
Heating range 40-110 degree C, 220volt with temperature controller, 1ft x 1ft square flat plate,
chemical and scratch resistance ceramic plate, temperature uniform across the plate, spill trough to
deflect spills away from electronic and control knobs with a LCD/LED indicator, hot indicator light
whenever hot plate is above 50 degrees.
Equipment quoted should comply with Indian Standards Institutions Guidelines or any other
National or International Guidelines. Voltage regulator of appropriate
rating to be included to cope with 160-260 V.
10.
VDRL ROTATOR:
Should be a table top model with platform size 300x300mm.
, Should be suitable for wide variety of rotating and mixing applications., Should have built-in 0 to
30 minutes digital timer.
, Should have a maximum speed of 180 RPM and suitable for serological,
VDRL tests and other tuned clinical diagnostic procedures, Should have spring holders for flasks and
blood bottles, Should work with input 200 to 240Vac 50 Hz supply.
11.
12.
13.
Digital micro pipette , chemical resistant , autoclavable , volume range : 20-200 µl
Digital 8-channel pipette , fully autoclavable
Volume range : 5-50 µl
PH METER (DIGITAL):
pH range: 0-14 pH,
Resolution : 0.01 pH
Temperature Range : 0.0 to 100ºC (Manual Compensation)
Display : 31/2 Digit LED Display
Power Supply : 230VAC ±10%, 50 Hz
Calibration check facility & Calibration Error indication
for 7.00 & 4.00 pH .Supplied with Combination Glass pH Electrode (0-70ºC),
Standard Buffer Tablets, Electrode Stand with Clamp,
Dust Cover, Power Cord, Operational & Instruction Manual,
Manufacturer Test Certificate & Warranty Card
02
02
02
02
Sd/Sr. Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
24
GROUP NO. 04
PURCHASE OF ‘M&E’ ITEMS---SURGERY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison
of rates, the same will have to be supplied at the earliest.
Sr.
Name of item with specifications
1
INSTRUMENTS SET FOR THORACIC SURGERY
Qty.
2
Specifications:1. Instruments should be made up of highest quality stainless steel with 10 yrs guarantee
against manufacturing & material defects & one year guarantee for sharpness from well
reputed international company only.
2. Instruments should meet the International certification as per DIN EN ISO 13845 :2001
standards.
3. Surface of the instruments should be non reflective.
4. It should be a FDA approved.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
2
W.D. Thomson Thoracic instrument holder and Anesthesia Screen with table rail clamps.
Rib spreader modified debakay
Doyn’s rasparatory adult size (Rt. & Lt.)
Rib cutter
Ronger
Bone holder
Stille pattern Rib shears
(24.2cm)
Periosteal elevator (Curved, St, Moon, Shaped)
Davidson Scapula retractor (21.3cm) length & blade width (5cm)
Rib approximator
Allisons lung retractor wire, spatula shape blade adult size (31.1cm)
Lung holding forceps
Metzenbaum dissecting scissors curved (200mm)
Metzenbaum dissecting scissors curved (230mm)
Hagar needle holder (205mm)
Debakey needle holder (250mm)
-1
-2
-2
-1
-1
-1
-1
-3
-2
-1
-2
-2
-1
-1
-1
-1
VASCULAR SET- MAIN:
Sr..
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
11.
12.
13.
14.a.
14.b.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Description
Halsted- Mosquito Artery Forceps,( GSS) 14 cm- 51/2” long, straight
Same as above, curved
Spencer- Wells Artery Forceps, German Stainless Steel(GSS), 15.5cm, Straight
Same as above, Curved
Halsted Artery Forceps,(GSS), 18 cm, Straight
Same as above, Curved
KELLY Clamp. Curved, 20 cm long
Right Angled Clamp- Mixter Type,(GSS), 14 cm
Right angled Clamp- Mixter type,( GSS), 22 cm
Right Angled Clamp- Lahey Type, (GSS), 19 cm
Right Angled Clamp, Lahey Type, (GSS), 23 cm
Vein Hook,(GSS), 17 cm long, 7mm deep
Cushing Nerve Hook, (GSS), Ball Tip, 19 cm long, 6 mm tip
Frazier Suction tube, (GSS), 19 cm long, angled, one piece, Thumb plate, Angular, 8 ch.( Fr.)
Same as above, 10 Ch (10 Fr.)
Potts- Smith Tissue Forceps, 15 cm long, straight( TC Insert)
Same as above, 18 cm long
Adson Tissue Forceps, 12 cm long, straight, ( TC Insert)
Same as above, 15 cm long.
Debakey Atraumatic Forceps, 16 cm long
Same as above, 20 cm long
Same as above, 24 cm long
Debakey, Atraumatic Forceps, Angled jaws, 16 cm long
Same as above, 20 cm long
Cushing Taylor Tissue Forceps, Bayonet shaped, 18 cm long, (TC Insert)
Metzenbaum Scissors, curved, 14.5 cm long, blunt tipped, (TC- Insert)
Same as above, 20 cm long
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
2
Qnty
8.
8.
8.
8.
4.
4.
8
2.
2.
2.
2.
2.
2
1.
1.
2
2.
2.
2.
2.
2
2
2
2
2
2
2
25
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
3
Same as above, 25 cm long
Reynold’s scissors, Five rounded points, delicate pattern, Curved, blunt tipped, 18 cm long
Iris Scissors, Curved, Sharp tipped, angled to side, 11.5 cm long, (TC- Insert)
Mayo- Noble Scissors, straight, 17 cm long
Same as above, 17cm long, Curved.
Debakey vascular Scissors, Rounded Blades with semi solid tips, angled to side, Semi blunt tips, 45
degrees angle, 16 cm long.
Same as above, 23 cm long
Debakey Vascular scissors, rounded blades with semi solid tips, angled to side, semi blunt tips, 60
degrees angle, 16 cm long
Derf Type needle holder, 12.5 cm long,(TC Insert)
Crile- Wood Needle holder, 15 cm long, (TC- Insert)
Same as above, 18 cm long
Debakey needle Holder, 26 cm long,(TC Insert)
Same as above, 31 cm long
Bozemann Wertheim type Needle Holder, S- shaped, 24 cm long,(TC Insert)
Satinsky clamps, (GSS), Cross serrated jaws, 26 cm long, 45 mm long jaws.
Debakey- satinsky Clamp, 24 cm long,(GSS)
Baby- Satinsky Clamp, (GSS), 15 cm long. 2
Debakey Atraumatic vascular Clamp, (GSS), 13 cm long,
Cooley Vascular Clamp, (GSS), 14 cm long, 30 degrees angled, jaws 30mm long
Debakey Multipurpose Vascular clamp, (GSS), Angled on flat, 30 degree angle, 16 cm long, jaws
30mm long.
Same as above, 22 cm long
Debakey Multipurpose Vascular Clamp, (GSS), Angled on flat, 60 degrees angle, 15 cm long,
Same as above, 22 cm long
2
2
2
2
2
1
1
1
2
2
2
2
2
1
2
2
2
2
2
2
2
2
ABDOMINAL WALL RETRACTOR SYSTEM:
The system should be self retaining, rapidly installable, multipurpose and flexible to retract
abdominal wall and viscera. It should be made up of high quality stainless steel. Instruments
should be made up of highest quality stainless steel with 5 yrs guarantee against
manufacturing & material defects & from well reputed international company only.
2
Specifications - The system should consist of the following:1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Table fixation arms - 35 to 40cm long.
Horizontal bars with ball joint - 35 to 40cm long.
Horizontal bars - 35 to 40cm long.
Extension bars - 35 to 40cm long.
Coupling devices.
Retractor blade holders and tilt retractor blade holders.
Ring segments 100mm, 150mm & 200mm size.
Rings - Small (20 to 25cm), Medium (25 to 30cm) and Large (30 to 35cm).
Scoville hooks 50mm & 80mm.
Meyerding retractors small, medium and large.
Malleable retractor blades small, medium and large.
Harrington Sweetheart blades small, medium and large.
Kelly retractor blades.
Balfour bladder blade.
Gelpi point retractor.
Vaginal retractor blade.
Deaver vaginal retractor blade.
The system should be CE mark and imported with a guarantee for 5 yrs. It should be
supplied with all the accessories required for different use of these instruments along with
container for storage, transport & sterilization.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
26
GROUP NO. 05
PURCHASE OF ‘M&E’ ITEMS---CARDIAC SURGERY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1
Name of item with specifications
FLEXIBLE FIBREOPTIC BRONCHOSCOPE:
1.
Qty. ((Nos.)
1
Broncho Fiberscope: Adult
•
•
•
•
•
•
It should have light weight, high resolution bronchoscope with integral (non
detachable) light cable.
Autoclavable suction valve to avoid risk of cross contamination.
There should be telescopic eyepiece for direct compatibility to CCTV system
in future.
It should have bending mechanism knob without lock.
It should have fully immerssible in liquid disinfectant solution.
There should be leak testing facility with automatic air feeding (non-pressure
gauge system) system.
Specifications:
Field of view: 120 ° or more
Depth of field:
3mm to 50mm or better
Bending range
up 180° & down 130°
Working length:
600mm or more
Total length: 900mm or less
• Standard set should have biopsy forceps, cleaning/maintenance kit otherwise
should be quoted separately.
Adult
Distal end dia:
5.9mm or less
Insertion tube dia:
6.0mm or less
Channel dia:
2.8mm or more
Paediatric
Distal end dia:
4.9mm or less
Insertion tube dia:
5.0mm or less
Channel dia:
2.2mm or more
Intubating bronchoscope
Distal end dia:
3.9mm or less
Insertion tube dia:
3.8mm or less
Channel dia:
1.2mm or more
Halogen light source:
•
It should be compact and light weight around 5-6 kg or less for easier transportability.
•
Should have autoclavable water bottle with separater channels for feeding air and
water to the endoscope for better transmission.
•
Should have 150watts halogen lamp with stand by lamp option.
•
Should have Build in Air-pump for distention & automatic leakage testing.
•
Should be compatible with rigid and flexible endoscopes both,
•
Pump pressure 0.3-0.6kg/cm2 (at Occ./min.) 0.18kg/cm2 or below (at 2000cc/min.)
Accessories:
Semi automatic leakage tester compatible with light source’s air-pump (i.e.
without manual rubber balloo type) pressure system. 1No.
Should be CE marked.
Certified that the specifications are generalized in nature.
2.
AUTOMATIC AUTOCLAVE STERILIZER:
1. Automatic autoclave sterilizer is required for sterilization of unwrapped
instruments, wrapped and porous loads and narrow linen item.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
27
2.
3.
4.
5.
6.
7.
8.
It should be compact, micro processed digitally controlled.
It should provide vacuum sterilization allowing steam to penetrate every item into
the chamber to avoid contamination and cross infection.
Following sterilization standards are required:
134degree c/121Deg. C.
- 3 minutes to 15 minutes
Cycle time
-12 minutes to 24minutes
Pressures
- 1.04bar to 2.32 bar
Capacity water reservoir
- 3.5ltrs.
It should have all safety features
- Pressure safety valve
- Door safety catch
- Error warning display
- Door interlock switch
- Pressure door lock
- Chamber pressure safety indicator
- Solenoid door belt.
It should be made of stainless steel with Aluminium/stainless steel trays with
design temperature of 143 Deg. sc.
Warranty for 3years and 2years free service after warranty are desirable.
AMC for 10years are required.
Specifications are generalized in nature
3.
HIGH PRESSURE AUTOCLAVE STEAM STERILIZER:
1
1. Horizontal Rectangular High Pressure High Vacuum steam Sterilizer.
2- Chamber size should be minimum of 2 feet width x 2 feet height x 4 feet length.
3- Should be operated on 400-440V, 3 phase with neutral, AC power supply.
4- Chamber volume should be minimum of 420 liters.
5- Steam generator volume shaoulf be minimum of 60 liters and should be fitted with suitable
electrical heater load of 18KW, to produce steam to sterilizer.
6- The sterilizer shaould have single door (Hinge type ) with radial locking using shooting bolts
having high pressure locking safety facility and made of good quality stainless steel 304 quality .
Should provide heat resistant SILICON door gasket withstand upto 140 Deg. C.
7- The sterilizer should have to draw the water, automatically, when needed in the inbuilt boiler.
8- Thickness of chamber of sterilizer should be minimum 6mm and to be made of stainless steel 316
quality is capable to withstand the negative pressure (vaccum) of 24-26’’Hg created by the vaccum
pump.
9- Thickness of door of sterilizer should be minimum of 12mm and to be made of stainless steel 316
quality.
10- Sterilizer jacket should be made of Boiler quality steel plate with a material thickness of 6-8mm.
11- Glass wool insulation thickness should be 50mm. Insulation cover should be made of good
quality stainless steel 304 quality.
12- All connecting pipes should be made of good quality stainless steel.
13- Stand should be made of Mild steel with anticorrosion paint.
14- The unit should be fitted with suitable water ring Vacuum pump, motor capacity: 3 HP, to create
high vacuum of 26”hg for efficient drying and sterilization of loads. The sound level of vacuum
pump should be <80DP and no vibration. Vacuum pump. Fitted with suitable stainless steel
condenser, piping’s and pipes to enable efficient drying with the use of the Vacuum pump.
15- Pressure gauge range should be 0 to 6 Kg./cm2 .
16- Compound gauge range should be – 1 to 6 Kg/cm2.
17- Safety valve range should be 0.3 to 3.5kg/cm2.
18- The unit should be capable of being stored continuously in ambient temperature of 0-50 Deg.C
and relative humidity of 15-90%.
19- Suitable validation port should be provided.
20- Working temperature of sterilizer should be 121-134 Deg. C and the corresponding pressure
should be 1.2-2.1 kg/cm2.
21- Safety features of sterilizers: Door locking facility, Low water protection system, Pressure cut off
facility and all other necessary safety features.
22- Equipment should have no sharp edges, will be securely mounted and would provide adequate
protection against moving and electrically energized parts.
23- Controls (e.g. switches, knobs) should be visible and clearly identified.
24- Labels and markings should be clear and visible.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
28
25. Equipment should be simple to use, operate and maintain. It should be designed for easy access to
serviceable parts.
26- AUTOMATIC OPERATION WITH PRINTER:
(A) The sterilizer should be fitted with suitable PLC (Microprocessor) for fully automatic cycle
operation instead of manual operating valve with following Features:
(i) PLC based microprocessor which should be incorporated with the sterilizer.
(ii) Digital displays of Chamber Pressure, temperature, cycle no., Batch no., Time & date, alarm
indicator, Low water indicator.
(iii) Provision of ‘error code analysis’ inbuilt, Leak test, Bowie & Dick and Standard Process.
(B) Printer: Printer that should automatically and continuously monitor and record dates, time of day,
load, identification no. and operating parameters.
(C) The system should be designed, primarily, for carrying out the following:
Leak test cycle
Bowie & Dick Process
Standard Process
High pressure and High Vacuum Process – vacuum holding.
27- STANDARDS & SAFETY:
(A) The unit should be manufactured as per IS specifications Mark ISI:3829 and also should bear the
certification.
(B) Electrical safety should conforms to standards for electrical safety IEC-60601-2-25 Safety of
electrocardiograms (OR EQUIVALENT BIS Standard).
(C) Electrical safety should conforms to standards for electrical safety IEC-60601/IS-12450
(D) Equipment performance should not be affected by electro magnetic interference radiated or
conducted through power lines from another device.
(E) Necessary operational training / day-to-day maintenance training should be imparted to our staff
after commissioning of the equipment at site.
28- SPARES AND ACESSORIES TO BE PROVIDED ALONG WITH EQUIPMENT:
(A) Spare fuses 10nos.should be provided, if fuses are used.
(B) Spare water reading glass and washers should be provided
(C) One number single water still (distillation) with following features: Electrically operated water
still capable of providing 10 liter / hour pyrogen free distilled water, made of stainless steel, having
immersion water heater(heating coils) with low water protection( low water cut off device).
(D) 60 liter plastic tank to store distilled water, fitted with two outlet taps to withdraw water.
29. Warranty for 5years with 2years free service are desirable.
30.
AMC for 10 years are required.
Specifications are generalized in nature.
4
SUCTION MACHINE:
It should be manual powered suction unit with piston pump for creating vacuum.
2 Housing of the unit must be of plastic moulded parts – non corrosive, easy to dismantle,
clean, disinfect and reassemble.
3 The unit can generate the vacuum of 600mm Hg +/ 10 mmHg.
4 The jar of the unit must be of polycarbonate material & should be autoclavable with
capacity of 1 ltr.
5 There must be vacuum gauge of bourden type of 5cm & can measure vacuum from
0 760 mmHg.
6 The unit must be pedal operated with top view manometer visible to the operator.
7 There should be bacterial filter of 0.3 micron with reusable/autoclavable hosing between
jar & pump.
8 The unit must be CE approved.
9. Warranty for 3 years and 10 years CMC after expiry of warranty are desirable.
5
‐
‐
Specifications are generalized in nature.
5.
CELL SAVER/AUTO TRANSFUSION SYSTEM:
1
1 Description of Function
1.1 The Cell Saver system reprocesses blood for the patient and separates it into
blood cells and plasma. Used in Surgical procedures in which there is rapid
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
29
bleeding or high volume blood loss. It can also separate and remove clotting
agents for the plasma. In this manner, blood may be prepared for long term
storage or may be re-infused back into the patient during surgery. This reduces
the need for blood from donors.
2 Operational Requirements
2.1 Manual & Automatic operation
2.2 Compact, portable design
3. Technical Specifications
3.1 Spinning centrifuge
3.2 Built-in programming
3.3 Built-in safety features
3.4 Sound volume control
3.5 Automatic protocols
3.6 Set up guide
4 System Configuration Accessories, spares and consumables
4.1 System as specified4.2 30 disposables should be provided with equipment
4.3 All consumables required for installation and standardization of system to be
given free of cost and for 50 patients rates should be quoted.
5 Environmental factors
5.1 The unit shall be capable of being stored continuously in ambient temperature of
0 – 50 deg C and relative humidity of 15-90%
5.2 The unit shall be capable of operating continuously in ambient temperature of
10 – 40 deg C and relative humidity of 15-90%
6 Power Supply
6.1 Power input to be 180-270VAC, 50Hz fitted with Indian plug
6.2 Suitable UPS of rating with spike protection, voltage regulation and for 60
minutes back up.
7 Standards, Safety and Training
7.1 Should be FDA/CE/UL or BIS approved product
7.2 Manufacturer/Supplier should have ISO certification for quality standards.
7.3 Comprehensive training for lab staff and support services till familiarity with
the system.
7.4 5years warranty with 2years free service and AMC for 10years are desirable.
8 Documentation
8.1 User/Technical/Maintenance manuals to be supplied in English.
8.2 Certificate of calibration and inspection.
8.3 List of Equipments available for providing calibration and routine maintenance
support as per manufacturer documentation in service / technical manual.
8.4 List of important spare parts and accessories with their part number and
costing.
8.5 Log book with instructions for daily, weekly, monthly and quarterly
maintenance checklist. The job description of the hospital technician and company
service engineer should be clearly spelt out.
Certified that specifications are generalized in nature.
6
CARDIO THORACIC SURGERY INSTRUMENTS SET (Imported):
These instruments should be made up of highest quality stainless steel with 10 years guarantee
against manufacturing and material defects and one year guarantee for sharpness from well reputed
international company only.
•
Instruments should not magnetize with use.
•
The surface of the instruments should be non-reflective.
•
The firm should quote complete set and incomplete set will not be considered.
•
The total cost of set should be quoted as well as individual cost of instruments for easy
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
30
replacement.
The instruments are required for primarily for Coronary Artery Bypass Grafting and should be
imported of the following makes: Scanlon, Fehling, Pilling, Aesculap& magnifying loupe of
following makes: Design for vision, surgical Acuity, Surgetel and Carl Ziess.
The following instruments are required:
•
1.
2.
High quality stainless steel case (Tray) for keeping the instruments and for sterilization-N=1
Needle Holder- Castroviejo and Jacobson type micro needle holders which should have fine serrations for a
secure grip on small needles 6-0, 7-0 and 8-0 sutures having lock, straight and curved of long sizes, N=2
3. Scissors- Castroviejo and Jacobson spring style micro scissors which should be find, sharp for smooth cuts
on small vessels and a variety of tissues. These should be spring style micro scissors with round (knurled)
handles should have micro fine blades. Long sizes 120 degree, 90 degree & 60 degree N=3.
4. Forceps- Micro Tip/ Round Handle Forceps are required for superior balance and precision to provide
excellent control in the surgical field for a secure firm grasp, for a traumatic handling of tissue with ring tips,
platform tips and straight tips, long sizes N=3
5. Hook- Coronary hook/nerve hook, long size, hook tip should be find with 90 degree bent. N=2
6. Dissectors: Coronary straight dissector, Coronary Bayonet dissectors long sizes N=2
7. Bull Dog Clamps- Curved and straight Debakey’s and Glover types atraumatic jaws for secure occlusion of
the vessels medium and long sizes N=4
8. Vein Holding Cannulas- N=2
9. Debakey Vascular Dilators, Malleable shaft clover tipped long size complete set with stainless steel tray for
dilators. N=1
10. Micro tying Forceps- Round handle micro tying forceps straight and curved with platform long sizes. N=2.
11. Anastomosis clamps- Cooley/ Dennis Anastomosis clamps which should be atraumatic secure occlusion of
the vessel should have extra find grip long sizes jaw tips should touch distally first to prevent tissue sleeping
out of jaws should have lock. N=2.
12. Needle Holder- Castroviejo and Jacobson type micro needle holders which should have fine serrations for a
secure grip for needle size 3-0, and 4-0 prolenesutures having lock, straight and curved of long sizes, N=2
Certified that the specifications are generalized in nature.
7
DEFIBRILLATOR WITH CPR CAPABILITY N=2:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
2
The defibrillator should be lightweight, small size with bright colored display.
The defibrillator should be Rectilinear Biphasic waveform.
It should have monitor display of both selected and energy display.
It should have ability to provide verification of the defibrillator charging and discharging
Without removing paddles from storage wells.
In manual mode the unit should provide energy selection at (1-10, 15, 20,30, 50,70,85,100,150,200) joules.
It should have ability to measure chest compression rate and depth in real time and both visual and optional
audible feedback is provided.
The unit should pacing with 40 milli-second pulse width.
It should have a capability single cable to do defibrillate, monitors , CPR and pace without the need for
separate ECG cable with the help of special type of disposable electrode.
It should have ability to do automatically comprehensive testing to confirm the presence of correct cables
and electrodes.
It should have ability to sense the type of electrode (adult or pediatric) and able to detect missing or dried
out electrodes.
It should come with lithium ion battery.
The defibrillator should be US FDA and CE approved and the unit should not have any FDA recall and
suspension in last one year.
It should have ability to filter out CPR artifacts and allowing person to see organized rhythms without
interrupting chest compression
Accessories to be quoted extra:
Adult and Pediatrics Disposable Electrode capable of doing pacing, monitoring, defibrillation, Cardio version
with attach Disposable CPR sensor.
Certified that specifications are generalized in nature.
8.
1
STERNOTOMY SAW:
1.
2.
3.
It is should be electric/ battery operated sternum saw for performing sternotomy.
It should have protection guard.
It should have detachable guide for holding the blade. Six blades should be supplied
alongwith.
4. It should comply Indian electric standards.
5. It should have foot pad for operation or operation button on the handle.
6. It should be CE marked should have all safety devices.
7. It should be sterilized by either ETO or autoclavable.
8. All standard accessories should be provided.
9. Three years warranty is desirable.
10. AMC for 10 years.
Specifications are generalized in nature.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
31
GROUP NO. 06
PURCHASE OF ‘M&E’ ITEMS---NEUROSURGERY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1.
Name of item with specifications
Qty. ((Nos.)
01
MULTIPURPOSE HEAD FRAME (4 PIN) SPECIFICATION:
Made of light weight metal alloy –F D A certified (imported)
Consist of followings parts
1. Basal Frame – It should be mounted on top of a Head holder. Basal frame has five separate
positions spaced at 35 degree angles where self –retaining retractors maybe placed using
thumbs screw. At each end of the basal frame are two holes to support the hand rest &
Instruments receptacle. The angle & height of the hand rest are adjustable to suit each
individual surgeon. Insulated Instrument Receptable should be Attached at one of holes of
the end of the Basal frame. The Semi circular bar Mounted on Basal frame should be able
to attach the Scalp Clip, Cotton plate or self retaining retractor. Semi circular frame should
be rotateable.
2. Head Holder – The patient “s head should be secured in the Head holder using 4 head pins.
Head pins for Adult & pediatric should be included. Head holder should be 360 degree
rotatable so that angle of patient head should be adjusted by surgeon easily.(if required)
3. Slide adjustor –It should allow the precise adjustment of a self retaining retractor attach to the
Semi circular frame.
4. Quarter frame – It should be getting & maintain sufficient room for operator conducting
lateral – approaches, particularly lateral sub occipital approach for acoustic neuroma.
5. Table attachment – It should be Custom made according to the span distance of our current
tables.
IT SHOULD BE CONSIST OF FOLLOWINGS OPTIONAL ACCESSORIES:
•
•
•
•
•
•
•
•
•
•
•
•
•
Head pin,standard
Head pin Short tip,for adult
Head pin short tip, for peadatric.
Self retaining retractor ,37cm
Self retaining retractor, 42 cm
Soft spatula,L, 6mm Tip
Soft Spatula,M, 4 mm Tip
Soft spatula, S , 2mm Tip.
Universal attachment
U – shaped Head rest, L(Horse shoe)
U – shaped Head rest,S (Horse shoe)
Micro Forks, L ,width 6mm,length 18cm
Micro forks, S ,width 3mm,length 15cm
4
4
4
1
1
2
2
2
1
1
2
2
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
32
GROUP NO. 07
PURCHASE OF ‘M&E’ ITEMS---OBST. & GYNAECOLOGY AND GYNAE. OT
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1.
Name of item with specifications
Qty. ((Nos.)
02
HIGH SPEED STERILIZER:
Specifications:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Horizontal high pressure, high speed
Cylindrical
Steam sterilizer
Mounted on stand
Electrically operated
ISI marked
Stainless steel
Dimensions (400-600) *(1000-1200) mm
Sterilizing pressure 1 – 2.5 kg/cm square
Power requirement 440 V; 3 phase; 50 HZ, AC Supply
Safety devices:
a) Safety value
b) Automatic vacuum breaker
c) Pressure gauge
d) Steam releasing valve
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
33
GROUP NO. 08
PURCHASE OF ‘M&E’ ITEMS---EMERGENCY OT
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1.
Name of item with specifications
DOUBLE DOME OT LIGHT:
Qty. ((Nos.)
01
Specifications:
1. Light Type : Ceiling Lights - 2 Domes
2. Intensity control
3. Focus Control by Sterlizable handle
4. Manevouring By manevouring handle.
5. Long reach spring balance arm for vertical movement. Tee joint movement in the
smaller dome.
6. Reflector :Aluminiumanodised parabolic reflector
7. Lux Output :
a. Larger dome: Max of 1,35,000-1,60,000 Lux
b. Smaller dome: Max of 70,000-1,10,000 Lux
8. Colour rendering index: Minimum 90
9. Bulb type:
Halogen
10. Step down transformer
11. IEC 60601-2-41 Compliant
12. S Mark Compliant
13. Quality system ISO9001:2000
14. Installation Base : minimum 200
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
34
GROUP NO. 09
PURCHASE OF ‘M&E’ ITEMS---REGIONAL INSTT. OF OPHTHALMOLOGY
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1.
Name of item with specifications
A-SCAN BIOMETER
Specifications:
1. Transducer:
-Frequency
10 MHz ± 10%
-Fixation
Internal LED
-Electronic accuracy ± 0.05mm
Qty. ((Nos.)
02
2. Phakic Status Functions:
Normal ,Phakic eye
Aphakic eye
Cataractous eye
Pseudophakic eye
3. IOL Types:
- PMMA
- Silicone
-Acrylic
4. Measurement Techniques:
- Automatic
- Manual
- Calibration
5. Measurement Methods:
- Contact method
- Immersion method
6. IOL Power calculation formulas:
- SRK I
- SRK II
- Holladay
- Post Lasik formulae
- Binkhorst I
- Haigis
- Hoffer Q
2.
7.
Scan Memory: Preferably 10 per eye with Standard Deviation of Axial Length
& Anterior Chamber Depth
8.
Preferable Thermal Printer
KERATOMETER
Specifications:
Bausch + Lomb Type
1. Magnification-15X
2. Scales
3. Corneal Radius of curvature- 6.5-9.4 mm
4. Corneal Ref.Power - 36-52 D ( in 0.25D Steps)
5. Axis of corneal ast…0-180 º ( in 5º steps)
6. Illumination-LED lamp
7. Working distance-70 ± 5mm
8. Adjustable table top, standard hydraulic.
9. CMC for 5 years
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
04
35
3.
4.
02
NON CONTACT TONOMETER:
Specifications:
1. Soft Air Puff, Auto and Manual measurement function.
2. Measurement: (a) Range - 0-60mm Hg (min.)
(b) Steps - 1 mm Hg (min.)
3. Monitor :
Colour Display monitor.
4. Printer:
Thermal type integrated printer with cutter.
5. Preferable :
IOP compensation by corneal thickness
Auto tracking, auto shot, and auto complete
The above specifications are generalized in nature.
TONOMETER:
Specifications:
02
1. Should be Applanation type.
2. Should be based on Goldmann Tonometry principle.
3. Should have a measuring range from 0 to 78 mmHg in steps of 2 mmHg.
4. Should have an accuracy of ±0.5mmHg
5. Should be supplied with calibration Bar, Prism and tonometer mount base to fix with optics.
6. Should be compatible with all models of slit lamps.
7. Should supply one spare prism.
8. Controls should be visible and clearly defined.
9. Labels and markings should be clear and visible.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
36
GROUP NO. 10
PURCHASE OF ‘M&E’ ITEMS---ENT
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison
of rates, the same will have to be supplied at the earliest.
Sr. Name of item with specifications
1. Universal grasping forceps for removal of foreign body (Imp):
• Sheath diameter: 2.5 mm working length 35 cm.
• Sheath diameter: 2.5 mm working length 50 cm.
• Sheath diameter: 2.0 mm working length 35 cm.
• Sheath diameter: 2.0 mm working length 45 cm.
• Sheath diameter: 1.5 mm working length 35 cm.
2. Prismatic light deflector to be fitted with Karl Storz
Bronchoscope(Imp)
3. Light Source: (Imp.):
Cold Light fountain halogen 250 watt should have built in spare lamp
which is switched on failure of main bulb.
Color Temp. 3400º K Light intensity adjustable in 3 steps.
4, Fiberoptic Light Cable: (Imp)
Diameter 3.5 mm, length 180 cm, to be fitted with above light source and
can be fitted to Bronchoscope (Karl Storz)
Qty. (Nos.)
04
02
04
02
02
04
02
02
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
37
GROUP NO.11
PURCHASE OF ‘M&E’ --ORTHOPAEDICS
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
Sr.
Name of item with specifications
1.
BATTERY OPERATED DRILL MACHINE:
Qty.
((Nos.)
01
-Separate Handpiece for drill and Separate for Saw , Dual Trigger Powered through
‘Maintenance Free’ d.c brush less motors. Pistol grip, fully cannulated, Tool-less assembly
of attachments, Accurate Speed control through the Trigger, Forward/Reverse , Oscillation
control on the Hand-piece Sterilizable by Steam Autoclave, ETO, Formalene and in 10
minutes through a ‘Flesh’ autoclave. Drill speed of 1000 rpm and maximum torque of
150lbs.
- 2 No’s of Battery Along with 2 no’s asceptic battery kit.
--The drill machine should have Lithium Ion Battery.
--It should be CE/FDA approved.
2.
DEEP FREEZER - VERTICAL- 800 C
1.
2.
3.
4.
5.
6.
Temperature range should be from -700 to -860 C and adjustable with setting accuracy of ± 10C.
System should be compression freezer with CFC free refrigerant gas.
System should be vertical standing and should have working volume of 300-450 Ltrs.
Mounted over heavy duty castors with auto-braking system.
System should be microprocessor controlled with digital display of all functions.
Construction:-
01
Internal, high-grade stainless steel with rounded corners for easy cleaning.
(Minimum 22 gauge)
• External corrosion resistant at least 1mm thickness.
• System should have minimum 5 inches thick foamed-in-place urethane insulation
• System should offer positive closure to assure tight seal against double independent
door gaskets to minimize frost build-up.
•
Tray totally plastic doors with latches.
• System should have inventory systems like racks, boxes and dividers .
7. Internal Teperature Control:
• System should have operating teperature & high/low limit alarm functions with set
point adjustable in steps of 10C.
• System should have down-feed evaporator for efficient refrigerant flow.
• System should have washable condenser fiter to maintain peak cooling efficiency. It
should also have indicator for advising removal and cleaning of dirth filters.
8. External ambient temp - Should perform in ambient temp up to +430C.
9. Safety System
• System should have key operated switch for main power and alarm system.
• System should have large and clean Digital displays for the set/run parameters.
10. Temperature monitoring:• System should have 7 day Digital temperature recording system with 0.1
graduation.
• System should have adjustable safety alarms with automatic, continuous charged
battery back-up to provide alarm functions even of power failure.
• System should have exterior alarm contacts for connection to remote monitoring
system.
• System should have inbuilt features to identify any temperature deviation beyond
alarm set point, to show the error that has occurred and to display if it had been
auto-corrected.
• Should have connectivuty to computer and date logger.
•
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
38
11. System should have internal flourescent tube.
12. Suitable Automatic Voltage regulator/stablizer meeting ISI specification should be
supplied. Borad specifications are: Automatic Type input 150-280V, Output 220v- -7%,
50Hz. Single arrangements for bypassing the start delay. Suitable MCB on input
voltmeter and indicators on Front Panel. Input Power Cable with 15A Plug and six way
output terminal strip for two outlets.
13. Electrical connections : 220Volt 50Hz.
14. Should comply with International Electromagnetic Compiance standards like IEC OR
EMC Directives. Electrical safety confroms to standards for electrical safety IEC-60601IS-13450, with CE Certification.
15. The unit shall be capable of operating continuously in ambient temperature of 0-5 deg C
and relative huminity of 15-90%.
16. It should be covered with five years warranty with spare. The firms should quote their
rates for AMC/CMC for five years after expiry of warranty periods of five years.
17. The firm shopuld submit 2% bank guaranty against warranty.
18. The firm should have good setup of installation in north India.
Down time penalty @ 2% p.m. will be imposed for not attending the fault or repairing the
equipment in time. (with in 48 hours).
Item No.3.
11
a)
b)
ORTHOPAEDICS
Angle Blade Plate
Instrumentation Set in
sterilizing Tray:
Kirschner wire Trochar tip (2.0mm in dia) Length 150mm
DCP Hip Drill sleeve 4.5
Triple Drill guide
Router
Chisel guide
Seating chisel
Inserter-Extractor
Slotted hammer
Impactor
Triangular positioning plate 90o, 50o, 40o
Triangular positioning plate 100o, 60o, 20o
Condylar Plate guide
Quadrangular Positioning Plate
20
01
01
01
03
03
03
02
03
01
01
01
01
LAMINECTOMY RONGEURS:
Smith –Peterson
Laminectomy Rongeurs
delicate model double
action jaws 3mm wide
24cm-9 ½
Duckbil Laminectomy
rongeurs actions jaws
angled to side 23cm 9.
Straight
Slightly curved
Fully curved
02
02
02
Jaws 2x10mm
Jaws 3x10mm
Jaws 4x10mm
02
02
02
Rongeurs
Jaw 1mm -- straight angle
Jaw 1mm --up angle
Jaw 2mm
Jaw 2 mm --up angle
Jaw 3 mm
Jaw 3 mm --up angle
Jaw 4 mm --up angle
Jaw 4 mm --up angle
Liston-Stille bone cutting
Double angled
foceps action 27cm- 10 ¾
Straight angled
Cluck rib shears 19cm long( 7 ½)
Caspar Laminectomy Rongeurs
Straight Length 15cm
3mm
5mm
Up
04
04
04
04
04
04
04
04
02
02
02
02
02
2mm
4mm
02
02
Down 2mm
4mm
02
02
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
39
c)
d)
SPINE RETRACTORS SET:
Adson rehector sharp
Bachman- eaton retractor
Leur bone cutting forecap
double action Approx
15.cm -6”
Penfield Dissectors
No. 2
Double endcl, slightly
NO-4
curved/Bayoneted
No-7
Micro forceps Round
straight
handle & Counterbalance Approx. 21CM-10”
(plate form tip
Self retaining refractors
For cervical spine
for laminectomy & other For Therolumbar spine
application with
complete set of hooks
and blades.
04
04
02
01
01
01
02
01
01
THORACOTOMY INSTRUMENTATION SET:
Straight rib shears 22cm
Brunner rib shrears 32cm
long 12 ½
Backward curve
Sypert bone cutting
foreps action Approx.36
cm -14 ½
Stil bone cutting forecap
double action Approx 23
cm -14 ½
Leksell- stille bone
cutting forecap double
action Approx 23 cm -9
½
Stille –Ruskin bone
cutting forecap double
action Approx 23 cm -9
½
leksell bone cutting
forceps double action
Approx 24.5 cm -9 ¾”
Echlin bone cutting
forecap double action
Approx 23 cm -9”
Frykholm bone cutting
forecap double action
Approx 24 cm -9 ½
Mayfield bone cutting
forecap double action
Approx 17.5 cm -7 ½
Micro forceps with flat
handle (1Mm cross
serrated)
Micro needle holders
with round handle
Fine Wound Retractors
long 8 ¾
left side open
right side open
01
02
02
Double
02
Double
02
02
02
02
02
02
02
Approx. 20 cm,8”
Approx. 25 cm 10”
01
01
Approx. 18.5 Cm , 7 ¼”
Approx. 23 cm , 9”
Kleinet-kutz type
Rollet type
- Sharp
-Blunt
01
01
06
04
04
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
40
e)
f)
g)
h)
DHS Instrumentation
Set:
DCS Instrumentation
Set:
End Plate Preparation
Set:
End Plate
Instrumentation Set:
DHS guide pin with threaded pin (2.5mm dia, Length 230mm)
DHS angle guide, 135o
DHS Angle guide 150o
DHS direct measuring device
DHS Wrench for DHS/DCS screw
DHS T-Handle with coupling
DHS Triple reamer , Complete
DHS Impactor
DHS Tap 12.5mm dia
Centering sleeve
Coupling screw
Guide shaft
Long coupling screw
20
02
01
03
05
03
10
03
03
02
03
03
03
DCS guide pin with threaded pin (2.5mm dia, Length 230mm)
DCS direct measuring device
DCS Wrench for DHS/DCS screw
DCS T-Handle with coupling
DCS Impactor
DCS Tap 12.5mm dia
Centering sleeve
Coupling screw
Guide shaft
Long coupling screw
DCS angle guide
DCS Triple Reamer, Complete
20
03
05
03
03
03
02
03
03
03
02
10
10 mm shaver
serrated cup curette -straight
-left ang
-right ang
01
01
01
01
Ring curette-anngled head
Straight osteotome-1/4”
Straight osteotome -1/2”
Angled osteotome-1/4”
Angled osteotome-1/2”
01
01
01
01
01
Pituitary 2mm Bayonetted
Pituitary 2mm Down-Biting, Bayonette
Pituitary 2mm Up-Biting, Bayonette
Scissors, Straight
Scissors----Curved Left
Scissors,--Curved Right
Bone Curette , 5.2 Cup, Bayonetted 0---Straight
Bone Curette , 3 Cup, Bayonetted ---Straight
Bone Curette Angled , 5.2 Cup , Bayonetted 1
Bone Curette , 3 Cup , Bayonetted --Angled
BoNe curette Reversed Angled , 5.2 Cup Bayonetted
Bone curette Reversed Angled , 3 Cup Bayonetted
90o Ball probe Long, Bayonetted ….Straight ,
Nerve Hook, Bayonetted ….Straight ,
Nerve Hook, Bayonetted ---Right
90o Ball Probe Long , Bayonetted ---Straight
Nerve Hook, Bayonetted --Straight
90o Dissector , Bayonetted --Stright
90o Dissector , Bayonetted --Left
90o Dissector , Bayonetted --Right
Bi-Polar Forcep, Bayonetted, US Connection --Stright
Bi-Polar Forcep, Bayonetted, US Connection --Angled,
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
41
Reduction Holding Forceps (Serated):
i)
Bone Plating
Instrumentation Set:
--Small
--Large
12
12
--Small
--Large
06
06
--Small
--Large
03
03
03
Point reduction forceps :
Patellar clamp:
Universal drill sleeve:
j)
k)
03
Bending Press
Templates:
--3.5 mm
--4.5 mm (narrow)
--4.5 mm (Broad)
02
02
02
General Surgical Instrumentation Set:
Artery forceps
--small (mosquito)
--Curve-Straight
30
30
--Large
-curved
-straight
30
30
Needle holder
-Small
-Large
-Medium
08
08
08
Forceps Plain
-Small
-Medium
-Large
06
06
06
Toothed
-Small
-Medium
-large
06
06
06
Kocher Forceps-
Straight- small
Large
10
10
Curved- small
large
10
10
Small
Large
12
12
Allis forceps-
Sponge holding forceps
08
Chittal forceps
06
Right angle
retractors/Homan’s
-Small
-Large
-Medium
08
08
08
Dissecting scissors
-Small
-Large
-Medium
10
10
10
Mayo’s Scissors (Suture cutting)
10
Towel Clips
40
40
-Small
-Medium
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
42
B.P. Knife Handles All sizes
Drill bit
5 each
2.5 mm
3.2 mm
4.5 mm
20
20
05
Gigli saw hook
3 set
Gigli saw wire cutter
40
Lehis Artery forceps
03
Homans Levers
L)
m)
(n)
-Small
-Large
12
12
Small Bone Fragments Set:
Wire Cutter
06
Bone holding foreceps
Small
08
Periosteum elevator
Small
Chisels (Curved)
--Small
--Medium
Sharp Bone Curette
Small
Osteotome
--Small
--Mediun
10
10
Bone Nibbler
--Straight double action (Different sizes)
20
Bone Gouze (Different sizes)
All sizes
Bone cutter
Small---double action
-straight
-curved
06
06
06
06
--single sided
--double sided
06
06
03 each
06
Large Bone Fragments Set:
Wire Cutter
06
Bone holding foreceps
Large
08
Periosteum elevator
Large
Chisels (Curved)
Large
Sharp Bone Curette
Large
Osteotome
Large
10
Bone Nibbler
Curved double action (Different sizes)
20
Bone Gouze (Different sizes)
All sizes
Bone cutter
Large double action
-straight
-curved
06
06
06
—single sided
--double-sided
06
06
06 each
06
Nailing Instrumentation Set:
K-nail reamers
6 sets
I/L Nail reamers
6 sets
Guide wires
-Beaded
-Non bead
20
20
Counter Sink
-Small
-Large
02
02
Bone Awl
-Small
-Large
03
03
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
43
(o)
Pelvis Instrumentation Set:
Bending irons-
-Small
-Large
2sets
2sets
Pelvic Reduction forceps
-Small
-Large
-Oblige-Ball tips
-Two Angles
02
02
02
02
Self Retaining Retractors
-Small
-Large
04
04
Plaster cutting machine (Electrical)
06
Wire Bender
03
Hand drill Machine
06
General Orthopaedics Instrumentation Set:
Hammer/ Mallet
--Small--Large
06
06
p)
q)
r)
Plier
--Nose
--Flat
05
05
Bone hook
--Medium
--Large
05
05
T-Handle with chuck
06
Lamina Spreader
03
Screw drivers:
3.5 mm
4.5 mm
15
15
1 set
Broken/Damaged Screw Set
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
44
GROUP NO. 12
PURCHASE OF ‘M&E’ ITEMS—ORTHOPAEDICS WORKSHOP
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of
rates, the same will have to be supplied at the earliest.
SR.
1.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
NAME OF ITEM WITH SPECIFICATIONS
PL 4S67
PL 4S68
PL 4S75
PL 4S76
PL 4S79
PL 4S80
PL 4S83
PL 4S84
PL 6C 20
PL 6C 21
PL 6C 62
PL 6C 63
PL 6F 29
PL 6F 30
PS 5S 51
PS 5S 65
PL 3B 72
PU OZ 21-01
PU OZ 21-02
PU OZ 22-01
PU OZ 22-02
PU 4A 40-12
PU 4A 40-12
PU 4A 41-06
PU 4A 41-12
QTY. (NOS.)
Foot Sach Liminated med. Heel LT-V
Foot Sach Liminated med. Heel RT-V
Foot Sach Liminated med. Heel LT-VII
Foot Sach Liminated med. Heel RT-VII
Foot Sach Liminated med. Heel LT-VIII
Foot Sach Liminated med. Heel RT-VIII
Foot Sach Liminated med. Heel LT-IX
Foot Sach Liminated med. Heel RT-IX
Assembly knee shin CF Size-III RT
Assembly knee shin CF Size-III LT
Ankle shaped (Neuter) Size-II
Ankle shaped (Neuter) Size-III
Block shin PTB Wooden (Upper)
Block shin PTB Wooden (Lower)
Pigment P&O Cinnamon (200gm P4)
Film PVC 150 micron 1.2 mm (10 Mt. roll)
Joint Hip Free Size-II
Kit B.E. Prosthetic Adult RT without gloves
Kit B.E. Prosthetic Adult LT without gloves
Kit A.E. Prosthetic Adult LT without gloves
Kit A.E. Prosthetic Adult RT without gloves
Cosmetic gloves shade of -06 Adult-RT
Cosmetic gloves shade of -12 Adult-RT
Cosmetic gloves shade of -06 Adult-LT
Cosmetic gloves shade of -12 Adult-LT
Endo-skeletal Below knee kit (Pylon Tube Aluminium)
05
05
05
05
10
10
15
15
05
05
25
45
50
50
02
03
04
06
06
04
04
05
05
05
05
20
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
45
GROUP NO. 13
PURCHASE OF ‘M&E’ ITEMS—COLLEGE OF PHYSIOTHERAPY
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE:
In case Indenting deptt. desires, the samples to check the quality before comparison of
rates, the same will have to be at the earliest.
Sr.
Name of item with specifications
1.
TREATMENT COUCH:
Wooden couches total height 31", size 72x24", foam rubber padded top upholstered with Rexene.
SHORT WAVE DIATHERMY (S.W.D):
a) Should have continuous mode
b) Frequency 27.12 Mhz
c) Timer 0-30 mnts with auto cut
d) Output power 500 watts
e) Tuning control- automatic and manual
f) Operating voltage 220 V A.C. - 230 V A.C.
Accessories:
• Condensor pads
• Output leads
• Power cables
• Spare fuse
S.W.D. test tube-Circular/Conical antenna/radiator
HYDRAULIC PUSH PULL DYNAMOMETER:
The Unit should have the following features: -For conducting manual muscle testing of various muscles.
-Should measure both push and pull force.
DIGITAL GONIOMETER:
Should have digital display for angle measurement.
DIGITAL HAND DYNAMOMETER:
Should have digital display for measurement of Grip Strength.
PINCH GAUGE:
Used for measurement of Pinch Strength.
BUBBLE INCLINOMETER:
Should have facility for measuring joint angles
SKIN FOLD CALIPER:
Standardized equipment, should have facility for measuring skin folds.
BACK LEG CHEST DYNAMOMETER:
Should have facility to measure back, leg and chest muscle strength.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
CONTRAST BATH:
Should Have Stainless Steel Tanks one with Heating Unit and One with heavy duty Cooling Unit.
Should Have Thermostat Control.
Can be used for both arms and legs.
Should have one height adjustable patient chair.
CHILLING UNIT WITH COLD PACKS:
01- Chilling Unit with thermostat control
03- Large Gel Packs
03-Medium Gel Packs
04- Small Gel Packs
POSTURAL MIRROR:
Full Size Postural Mirrors on Movable Frames to be used with parallel Bars
WHEEL CHAIR:
Should be light weight with push rims and removable armrests.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
Qty.
(Nos.)
15
01
01
01
01
01
02
01
01
01
01
02
02
46
14.
15.
16.
17.
18.
19.
20.
21.
SKELETON ARTICULATED:
Full Body Articulated Skeleton
SKELETON DISARTICULATED:
Full Bone Set
SUSPENSION THERAPY KIT:
Kit Should Include Ropes of Various lengths, various shapes slings, pulleys,
S-hooks, clips and wooden cleats.
HAND HELD RESPIRATORY PRESSURE METER:
Should be user defined.
Should provide the measurements of Maximum Inspiratory and Expiratory Mouth Pressures
(MIP/MEP) with Sniff Nasal Inspiratory Pressure (SNIP).
HAND HELD SPIROMETER:
Should be user defined.
Should provide a variety of measurements of inspiratory and expiratory indices..
Should have provision for connection to external printers.
THRESHOLD INSPIRATORY MUSCLE TRAINER:
Should have function for increasing inspiratory muscle strength.
Should be Easy to set, with adjustable pressure
THRESHOLD PEP:
Should have function of improving mobilization and preventing accumulation of secretions.
Should be Easy to set, with adjustable pressure
PFLEX INSPIRATORY MUSCLE TRAINER:
Should provide resistance that increases respiratory muscles strength.
01
01
01
01
01
10
10
10
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
47
GROUP NO. 14
PURCHASE OF ‘M&E’ ITEMS---COLLEGE OF PHARMACY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
Sr.
1.
2.
3.
4.
5.
Name of item with specifications
AUTOMATIC PLUS ELEVATED MAZE FOR MICE:
For studying anxiolytic response. Consisting of open arms of 16x5 cms and
enclosed arms of 16x5x12 cms
AUTOMATIC PLUS ELEVATED MAZE FOR RATS:
For studying anxiolytic response. Consisting of open arms of 50x10 cms
and enclosed arms of 50x10x40 cms
MICROBALANCE:
Microbalance with readability 0.01mg with internal automatic calibration
HORIZONTAL LABORATORY AUTOCLAVE:
Chamber 350x550 mm, 4KW, Pressure gauge, automatic low water level
cut-off device, compound gauge and pressure control switch
HORIZONTAL LAMINAR FLOW:
Laminar flow bench horizontal type (3x2 ft.), comprising of HEPA/ and
Pre-filter, motor blowing assembly, manometer, tube light
Qty. ((Nos.)
10
10
03
01
01
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
48
GROUP NO. 15
PURCHASE OF ‘M&E’ ITEMS---PHARMACOLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
Sr.
Name of item with specifications
1.
AUTOMATIC ELEVATED PLUS MAZE WITH:
The maze to be mounted on the supports to give an appropriate height from the floor.
There should be a cross of two arms of equal surface area but of the arms to be
delimited laterally by walls. Made up of black plexiglass and have the variant for rats
and mice. The maze is supplied with grey wall. Eight photoelectric cells arranged in
each arm so as to define 9 sectors to register the animal position.
The software with an interface using a digital I/O card which can be inserted into PC
computer to be included in the maze
Standard for rats arm length 100cm x 10(w) Height walls 10 transparent, 50 grey,
Height from floor 75 cm.
PLETHYSMOGRAPH:
Control unit dimensions 28(W)X28(D)X11(H) cm, Stimulation Unit Dimensions
23(W)X22(D)30(H) cm, Starting by panel key or pedal switch, Resolution 0.01 s
steps, Material composition clear methacrylate (cell), stainless steel (stand), platinum
(electrode), power requirements 110V or 220V, 50/60Hz.
01
3.
SPONTANEOUS ACTIVITY CAGE:
Commands: via “soft keys”
Read-out : multifunction graphic display
Print-out : by incorporated thermal printer
Starting : via keyboard on the electronic unit
Connection to PC : through DELTA 9-pin connector. See paragraph 2.
Power Requirement : 115 or 230 V, 50/60 Hz, 20 W max.
Operating Temperature : 15° to 30° C
Sound Level : negligible
Dimensions
- electronic unit : cm 27 (w) x 16 (d) x 19 (h)
- assembled cage : cm 54 (w) x 50 (d) x 37 (h)
Weight
- electronic unit : Kg 2,70
- assembled cage : Kg 11,80 (with sensors 7435/7436)
02
4.
ECG MACHINE:
Lead: Standard 12 leads,
Input impedance: ≥50MΩ.
Frequency response: 0.05Hz~150Hz (-3dB, + 0.4dB)
Time constant: >3.2s
Noise level: =13µVp-p
Filter: AC filter, EMG interference filter, DFT filter
Sensitivity: Auto 10, 20mm / mV ±2% etc
Measure data: HR, interval, Duration,Axis
Paper speed: 25, 50 mm / s ± %3 etc
Recording paper: 210/216mm(W)×20/30m(L)
Safety Type: Class I,Type CF
Size: 338mm(L) x 280mm(W) x 85mm(H)
01
2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
Qty.
(Nos.)
02
49
5.
BICYCLE ERGOMETER:
Large, well-balanced fl ywheel 22 kg (48 lbs).
Electronic display with heart rate.
TECHNICAL DETAILS:
Width 550 mm (22”) at handlebar.
Width 640 mm (25”) at support tubes.
Length 1240 mm (49”).
Height 1260 mm (50”) at handlebar.
Height 790-1160 mm (31-46”) at seat.
Weight 58 kg (128 lbs).
Max userweight 250 kg (550 lbs).
ELECTRONIC METER:
Shows pedal-turns per minute (RPM),
heart rate in beats per minute (HR),
cycling-time in minutes and seconds (TIME),
work level in watts (WATT) and VO2 in l/per minute and ml/kg per minute.
WORKLOAD RANGE:
0-250 Watt (60 rpm).
01
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
50
GROUP NO. 16
PURCHASE OF ‘M&E’ and ‘M&S’ ITEMS---RADIODIAGNOSIS
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison
of rates, the same will have to be supplied at the earliest.
Sr.
1.
2.
3.
4.
5.
6.
7.
Name of item with specifications
BARIUM SULPHATE SUSPENSION FOR GIT STUDY:
• Barium Sulphate Suspension for G.I.T. study must be of use for multipurpose
study of G.I.T.
• It must be smooth creamy suspension of microfine and coarse particles of
Barium Sulphate.
• It should not flocculate at all.
• It should have excellent flow in GIT and perfect adhesion to G.I.T. for
accurate diagnosis.
• It shoul be acceptable to patient by its non-gritty texture and fruit flavour
LIQUID CHEMICALS:
Liquid chemicals for Heavy Duty Automatic X-ray Film Processors. The
Developer and Fixer with Hardner to make 20 and 25 Litres respectively. The
Developer should consist of Part A,B & C and Fixer should consist of part A & B
separate pack. Complete set of same brand.
Sterile Disposable Syringe for Medrad CT Injector (Single head):
Sterilie Disposable Syringe CT TRI Pack (A Disposable Kit for Medrad CT
Injector System) consisting of 200 ml QWIK-FIT Syringe 01 No. Coiled Low
Pressure Connector Tube 01 No. and Quick Fill Tube 01 No.
MRI Compatible Disposable MRI Kit (Pressure Injector Syringe):
MRI Compatible Disposable MRI Kit (Pressure Injector Syringe) for MRI
Angiography compatible with Medrad Brand Spectris Solaris injector with
following contents:• 65 ml Qwik-fit Syringe for contrast medium.
• 115 ml Qwik-fit Syringe for Saline.
• Small Spike for Contrast Medium.
• Large Spike for Saline.
• 96” Low Pressure Connector Tube for Spectris Solaris.
MULTIFUNCTION METER:
• A multifunction meter for non-invasive evaluation of radiation output system. The
meter should evaluate pulsed flouro, CT, Portable X-ray machine, mammography,
Radiographic and Fluoroscopy, low, medium & high frequencies machines with builtin-one system. It should measure KV, time, dose, dose rate, HVL and total filtration
in one shot. The instrument should measure CT dose profile.
• Communication should be easy by built-in Bluetooth and USB. The system should
contain all hardware and software needed to capture data on PC.
SURVEY METER:
The non-invasive survey meter should be of ion chamber type and measure the radiation
level of Diagnostic range over X-rays and CT installation and should read in SI unit i.e.
micro Sievert per hour. There should be auto-ranging digital display and data logging.
Operating mode should be rate, integrate and freeze.
AMC/Repair of GME 100mA Mobile X-ray Machines i.e. Unit-I, Unit-II and Unit-III
Qty. ((Nos.)
300
pack/bottles
(Each pack /
/bottle of 1
litre)
200 complete
sets of same
brand
100 Complete
Sets/Units
50 Complete
Sets
01 No.
01 No.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
51
GROUP NO.17
PURCHASE OF ‘M&E’ ITEMS---PATHOLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of Controller of Finance Pt.B.D.Sharma
University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
SR.
NAME OF ITEM WITH SPECIFICATIONS
(A)
HISTOPATHOLOGY SECTION:
(a)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EMBEDDING STATION:
15.
16.
17.
•
•
•
•
•
•
•
•
•
•
•
•
•
01
Ergonomically designed.
Compact diamensions.
Vertical guidance by zero - blacklash & maintenance free cross roller bearing.
Electronic precission feed mechanism with stepping motor technology.
Minimum section thickness range from 1 to 100 um.
Especially smooth running hand wheel.
Fine orientation with one hand operation and zero positioning.
Easy exchange of specimens.
Specimen retraction during return travel, can be turned off.
Large section waste tray, covering the entire working area.
Full operation safety.
Steping Micrometer mechanism.
To operate on 230V-250V.
To be supplied with disposable blade holder common for both high and low profile blades. 5 pkts of low profile disposable blades
and 5 pkts of high profile blades.
Cost of blades (low/high profile) to be quoted separately.
Suitable UPS for atleast 1 hour backup and voltage stabilizer.
Terms & Conditions: as per institutional policy for guarantee/ warranty and CMC.
Warranty: 02 years,
CMC 5 years.
(c) TISSUE SECTION FLOATATION BATH:
•
01
Digitally programmable system with separate system for heating and cold module.
Cold plate temp. range: 0 to 10 Deg.C.adjustable in the steps of 1 deg. C with working surface 30x30 cm.
Casettes capacity: 60 standard cassettes alongwith covers.
Minimum number of Paraffin collection tray: 02
Noise free Compressor
Heating embedding module fitted with independent Paraffin dispenser fitted with precise flow rate adjustment and
to delivery the precise amount.
Paraffin reservoir capacity minimum 3 ltrs.
Working Temp. minimum range 55 to 70 Deg. C
Forceps holder with temp. control upto 70 Deg. C .
Fitted with magnifying lens and illumination system.
Fitted with foot switch control, magnifier and programmable OFF & ON Timer.
Working surface: 10 casettes on each side.
Rates must include power back up system for one hour not included in the rates of equipment.
Warranty: 02 years,
CMC 5 years.
(b) SEMI AUTOMATED ROTARY MICROTOME:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Qty.
((Nos.)
02
Maintenance of constant temp., ergonomically designed, temp. digital display and programmed and current temp., touch key
control panel.
Min. Temp. range: 30 to 70 Dec. C. ± 1 Deg. C
High Temp control accuracy not less than 0.5 Deg. C.
Easy to clean, scratch proof surface.
Minimum inner size: 20x8x5 cm.
Fitted with overheating protecting system.
Stainless steel OR equivalent corrosion free surface.
Working on 220-240 VAC, 50 Hz.
CE/FDA approved
Rates must include power back up system for one hour not included in the rates of equipment.
Warranty: 02 years,
CMC 5 years.
(d) DIGITAL ORGAN WEIGHING BALANCE:
•
•
•
•
•
•
•
02
Digital display of organ weight with organ weighing scale having following features:Digital display.
Platform size minimum 350mm x 350 mm (approx.)
SS 304 grade/equivalent of superior material construction.
Complete SS Platform for easy cleaning and anti-staining.
Accuracy upto 2 gms.
Warranty: 02 years,
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
52
-2-
(e)AUTOMATIC TISSUE PROCESSOR:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
01
Minimum 100 cassette processing capcity, carousel type, bench top.
Should have atleast total 12 processing stations
Should have delayed-start feature, programmable min. 20 days in advance.
Should have Hand-held touch key controller or built in on board key pad on the front face that is simple to
use.
Storage capacity of minimum 08 complete programs in the instrument’s memory.
Programmable immersion time during each step.
Lids for containers to be closed while operation with lids for user protection.
Should have either external vaccum unit for rapid wax infiltration of specimens or Spiral Agitation for better
processing akin to Vaccum.
Tissue basket should be metallic.
Tissue basket that can be easily loaded and unloaded with hanger clip in the unit, hood.
Fume extraction system should be built in.
In case of power failure, there should be suitable power back-up so that tissues not to be left hanging in air,
but should be immersed in the nearest reagent/paraffin container.
To be supplied with UPS of 1 KVA with min. one hour back-up.
2 year warranty & 5 year CMC.
(B)
IMMUNOHISTOCHEMISTRY AND IMMUNOPATHOLOGY:
(i)
DIGITAL pH METER 0-14 with increment of 0.001:
Digital pH meter electric with electrodes with combined electronic display. Four
digit accuracy 0.1 pH.
02
NOTE: The rates of electrodes should be quoted separately.
(ii) IMAGE ANALYSIS SYSTEM:
Image Capture System, Image Analysis Software equivalent or better than Image
Pro and compatible computer system of latest configuration, Coloured Laser
Printer and Scanner required for Olympus Research Microscope with Fluoroscent
Microscopy Model: BX-51
• Two years warranty.
01
(iii)
DIGITALLY CONTROLLED AUTOPIPETTE OF VARIOUS SIZES WITH
FOLLOWING FEATURES:
1. Size:
a) 2-20 Microlitres—4 Nos.
b) 20-200 Microlitres---03 Nos.
c) 100-1000 Microlitres—03 Nos.
2. Integrated Surface protection-Anti microbial surface
3) Ergonomic design
4) Tip cone should be Autoclavable
5) Advanced volume gearing-Modular volume adjustment mechanism
6) 1200 rotation of finger rest
7) Extremely light weight reduces the risk of Repetitive strain injury
8) Volume locking with “Set and forget” function
9) Separate soft touch tip ejector
10) Super blow out piston with volumes of 50 ul and below volumes.
11) Adjustable finger rest for super comfort
12) In lab calibration and easy maintenance –Easy to open (No special tool
required)
13) Two years warranty.
10
(iv)
FULLY AUTOMATIC PROGRAMMABLE MICROVAVE OVEN:
28-35 Ltrs.capacity having Touch Screen Electronic Panel, Digital Display.
Warranty 2 years.
02
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
53
-3(v)
INDUCTION PLATE WITH COMPATIBLE PRESSURE COOKER:
Upto 2000 wattage, Touch Screen Electronic Panel, fully water proof, Thermostatic
Control with auto cut-off, Different Temp. Settings starting from 150º -200 º C, with
compatible pressure cookers—one each 2-3 Ltrs. And 3-5 Ltrs.-----required for Antigen
retrieval for Immunohistochemistry.
Warranty: 2 Yrs.
02
(vi)
HUMIDITY CHAMBER:
for Immunohistochemistry processing for 20-25 slides
05
vii)
AUTOMATED ANTIGEN RETRIEVAL SYSTEM (Heat --- Water Bath based etc.:
• In full functional status with all the accessories required for retrieval of antigens on
Tissue Sections on glass slides.
• To be supplied with atleast 10 slide holders of a minimum of 10 slide capacity.
• Suitable power back-up for atleast ½ hour.
• Two years warranty.
• CMC 5 years
viii)
DEEP FREEZER UPRIGHT MODEL FOR CONTINUOUS FREEZING
(with lockable caster wheels)
01
--CFC free high efficiency Refrigeration system
--Temperature Minimum Range: - 10 to -45 deg. C.
(i) Digital temperature controller with password protection—maximum 1 Deg. C fluctuation on set Temp.
(ii) Microprocessor Control/Microcontroller-for temperature setting
(iii) Alarms for Voltage, Over heat, Over cool (at maximum 5 Deg.C.)
--Size: Minimum 300 litres with minimum 3 adjustable Stainless Steel, rust
free shelves. Inner chamber made of stainless steel, with appropriate
insulation between Inner & Outer chamber.
--Outer Lockable Door.
--Electricity: 230 volts AC, 50Hz single phase.
--Refrigeration system: Hermetically sealed compressor(s).
--Noise----Less than 65 db.
--Safety and standardisation certificates: National and/or International Standards.
--Online Power Back-up for 2 hours.
--Warranty: 5 years
--CMC: 5 years
(C)
FLOWCYTOMETERY LAB COMPATIBLE WITH B.D. FACS
CANTO –II :
02
(1) CENTRIFUGE WITH RCF DISPLAY:
Centrifuge Machine R-23 Revoluted Research Coupled with Solid State Speed Motor-0-120 Mini
tubes 36x15 ml angle Head Maximum Speed RPM 7000 p.m. Rotar/Header should be within 16 holes
for 5 ml tubes.
AUTOPIPETTES:
F1: 2-20 Microlitres ===04 Nos.
F2 20-200 Microlitres===03 Nos.
F3 100-1000 Microlitres==03 Nos.
1) Integrated Surface protection-Anti microbial surface
2) Ergonomic design
3) Tip cone should be Autoclavable
4) Advanced volume gearing-Modular volume adjustment mechanism
5) 1200 rotation of finger rest
6) Extremely light weight reduces the risk of Repetitive strain injury
7) Volume locking with “Set and forget” function
8) Separate soft touch tip ejector
9) Super blow out piston with volumes of 50 µl and below volumes.
10) Adjustable finger rest for super comfort
11) In lab calibration and easy maintenance –Easy to open (No special tool
required)
12) Five years warranty
Total
10
…4.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
54
-45.
02
VORTEX MIXER:(Adjustable speed):
Touch and continuous operations
MX-S with wide speed range of 0-2500rpm, stepless speed regulation
MX-S used for various mixing applications with optional adapters, handles up to 48 tubes
Specially designed vacuum suction feet hold to the work surface and prevent the unit from
movement
• Aluminium cast base avoids unnecessary “walking”
•
•
•
•
Voltage [VAC]
Mixing motion
Orbital diameter[mm]
Motor rating input[W]
Motor rating output[W]
Permissible on time[%]
Speed range[rpm]
Speed display
Permissible ambient Temp. ( Deg. C)
Permissible relative humidity
•
•
220-240
Orbital
4
58
10
30
0-2500
Scale
5-40
Upto 80%
Warranty: 2 years
CMC: 5 years
02
6. ROCKING SHAKER:
LCD Digital Rocking Shaker:
•
•
•
•
•
•
•
•
Smooth see-saw rocking motion with fixed angle 9°
Load up to 10kg
Speed range of 10-70rpm
DC brushless motor for quiet maintenance free running.
Designed for continuous or timed operation
Digital speed control and LCD display, speed and timer can be viewed simultaneously
Wide range of accessory platform to be used for variable size vessels, and non-slip mat
holds vessels prevent slipping.
Warranty: 5 years.
Specifications:
Voltage [VAC]
Motor type
Rocking motion
Tilt angle [o]
Max. load capacity (with platform) [kg]
Speed range [rpm]
Speed display
Timer
Timer display
Time setting range [min]
Operation type
Permissible ambient Temp. ( Deg. C)
Permissible relative humidity
100-240
DC motor
See-saw rocking
±9 o
10
10-70
LCD
Yes
LCD
1-1199
Continuous / timed operation
5-40
Upto 80%
7. PLASTIC WARE & OTHER CONSUMABLES ON RATE
CONTRACT FOR 02 YEARS:
PRODUCT DESCRIPTION
POLYSTYRENE TEST TUBE 12X75MM,
6ML,
Falcon 50 ml Conical Tube Sterile,
Nonpyrogenic with Screw Cap
FLAER (Alexa 488 proaerolysin variant) liquid
format.
PHOSPHATE BUFFERED SALINE
PACK
SIZE
1000/Case
500/Case
QTY
AS PER
REQUIREMENT
25 ug
500 ml
…5.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
55
-5-
(D)
HAEMATOLOGY SECTION:
1. DIGITAL pH METER 0-14 with increment of 0.001:
Digital pH meter electric with electrodes with combined electronic
display. Four digit accuracy 0.1 pH.
01
NOTE: The rates of electrodes should be quoted separately.
2. DIGITALLY CONTROLLED MICROPIPETTE:
1.
2.
3.
Fixed Volume: 20 microlitres with increment 0.5 microlitres.
Variable volume: 20-200 microlitres with increment of 1.0 microlitre with inaccuracy less
than 0.60% and imprecision of less than 0.15%
Variable volume: 100-1000 microlitres with increment of 5.0 microlitres with inaccuracy
less than 0.60% and imprecision of less than 0.20%
10
03
03
MAKE: GLAXO/MICROLIT/EPPENDORF/ERBA/BOROSIL/LAB-AID
Warranty: 2 yrs.
02
3. TOP PAN DIGITAL BALANCE:
0.5 mg to 100 mg. Accuracy, Readability and Repeatability upto ± 2%.
Warranty: 2 yrs.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
56
GROUP NO. 18
DISPOSAL OF CONDEMNED STORE --- CENTRAL STORE
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of
Finance University of Health Sciences Rohtak.
Rs.40,000/- in shape of CDR/FDR in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak
(Haryana) India
CONDEMNATION LIST OF UNSERVICEABLE ARTICLES OF PT.
B.D.SHARMA PGIMS, ROHTAK.
Sr.
Name of item
1
Qty. to be
condemned
2
3
App. Wt.
(Kg)
4
SOT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Thyroid Guard
Electric Tube Set
Iron Stand for Maintenance
Suction Apparatus electric
Surgical Diathermy ER Bottom
Cognate OT Table
Selenex Mobile Image Instensir Fix TV System from ortho stock
register
IV Stand
SS Jug
EI Bed Pan
Dirty Linen bag stand
Iron Tub zink
Pt. Trolley various type
Emergency Recovery Trolley
Wheel Barrow
Lead Aprin
Formaline Chamber
18
Bicycle
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Weighing Machine
(ICU Bed with Mattress
Pt. Strecher Trolley
Blowers (Hot room air)
Intensive Care Ventilator (Evita Dura)
Photocopier
Blood Gas Analyser
Wooden Board
Screw Driver Set
Falcon Anaesthesia Machine
Peripheral Nerve Stimulator
Tool Kit
Larngyscope with 3 blades
Desert Cooler
10
10
5
10
9
1
1
0.500
2.000
3.000
10.000
20.000
200.000
300.000
2
1
2
10
2
5
3
2
14
6
2.000
0.500
1.000
0.500
20.000
200.000
600.000
40.000
60.000
30.000
1
20.000
3
5
1
2
2
1
1
1
1
12
1
1
16
2
12.000
500.000
50.000
3.000
300.000
150.000
7.000
10.000
0.100
960.000
0.500
2.000
6.000
40.000
Public Relation Officer
Anaesthesiology
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
57
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
Syringe Met
B.P. Apparatus Stand
B.P. Apparatus
Godrej Chair
Oxygen Flow Meter
RICU Wooden Board
Larngyscope with 2 blades
Boyl’s MK III
Voltage Stabiliser
Voltage Stabiliser
Laryngoscope with 4 blade
Stabilizer 0.5 KVA
Stabilizer 5 KVA
Over Head Projector
Over Head Projector
SS Trays
Suction Machine
SS Bowls
Ventilator Evita-2
Godrej Stores well almirah
Spirit Lamp
Locks
IV Stand
Syringe Pump B. Burn, Delta
Iron Stool Revolving
Office Steel Rack
TLD Filsm with Cassel
Syringe Needle Destroyer Machine
BP Apparatus
Boyle’s MK III
Boyle’s MK III
Anaesthesia Machine Boyle’s
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
Bed Pan
Dressing Drum
Dressing Drum Medium
Suction Machine
E.I. Basin
Torch
Voltage Stabilizer 0.5 KVA
Instrument Sterilizer
Hot Plate
I.V. Stand
Weighing Machine
Wheel Chair
Wall Bracket (Wooden)
Stabiliser 3 KVA
Ceiling Fan
BP Apparatus
81
82
83
84
85
Portable Ventilator Medisys
Respirat Gas Agent Monitor
Defribrilator (Bruker)
Dual Display Temp Monitor
Ultra Sonic Nebulizer
4
1
6
4
10
1
2
2
2
4
4
5
2
3
1
3
4
5
1
2
1
4
1
13
1
1
19
2
4
1
1
16
0.020
10.000
6.000
20.000
3.000
10.000
0.800
150.000
24.000
48.000
0.500
15.000
24.000
15.000
5.000
1.500
60.000
0.250
150.000
50.000
0.020
0.400
5.000
10.000
3.000
10.000
0.100
0.500
0.250
100.000
100.000
960.000
2
2
2
2
4
3
1
1
1
1
1
2
1
1
2
3
2.000
6.000
4.000
40.000
4.000
1.500
3.000
5.000
1.500
5.000
2.000
50.000
3.000
5.000
12.000
450.000
RICU (Anaesthesia)
Anaesthesia
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
4
1
1
1
15
48.000
30.000
0.500
2.500
58
EM. OT
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Artery Forceps
Right Angle Artery Forceps
Kocher Forceps
Allise Forceps
B.P. Knife Handle
Needle Holder
Disecting Forceps
Mastoid Retactor
Chittle Forceps
Sponge Holder
Babcock
Lagen Back Retactor
Intestinal Clamp
Precto Scope
Towel Clips
Gigli Saw Guidner
Skin Grafting Handle
Self Retaining Retactor
Bone Nibbler Double Action
Bone Guge
Chissel
Hand Drill
Sequestum Forceps
Bone Cutter
Bone Lever
Screw Driver
Depth gage
Bone Tap
S/Nail Punch
K Nail Hooks
Suction tip
Bone Holding
Samp Suction tip
Pin Cuter
K Nail Reamer
Rod Clamp
Scissor all type
Artery Forceps
Chittle Forceps
Dissecting Forceps Tooth
Dissecting Forceps Plain
Petalla Holding Forceps
Intestinal Clamp
Pile Forcesp & Applicator
Wire Cutter
OT Table (Panbag Chakla)
OT Light (Portable Martin)
Voltage Stabilizer
Water Cooler
Suction Machine
Window AC
Desert Cooler
IV Stand
Kura Trolley
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
40
2
10
15
5
40
15
3
4
15
4
3
2
1
25
4
1
3
2
4
3
2
1
1
4
4
1
4
1
4
6
4
1
1
8
1
50
30
5
15
10
1
3
1
1
1
1
1
1
2
3
3
2
2
0.800
0.100
0.600
0.600
0.200
2.000
0.700
0.150
0.600
0.800
0.100
0.500
0.100
0.100
0.750
0.050
0.500
0.450
0.500
0.750
0.600
1.000
0.200
0.250
0.500
0.300
0.200
0.400
0.200
0.200
0.200
0.500
0.050
0.200
0.800
0.300
1.000
0.750
0.500
0.600
0.500
0.200
0.300
0.200
0.300
50.000
30.000
15.000
80.000
30.000
120.000
30.000
20.000
30.000
59
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
Viewing Box 3x1
Torch
Viewing Box Single
Tailor Scissor
Patient Trolley Small wheel
Baby Weighing Machine
SS Big Drum
Halogen Heater
Selnex Image Intensive Fire image
IV Shield
Ss Dressing Drum Medium
SS Dressing Drum Small
SS Steel Bucket
Bowl Sterilizer
Flow Meter
C Supply flow meter b type
Syringe Neelde Cutter
Voltage Stabilizer 5 KVA
BP Apparatus
Magil Forceps Big Size
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
Cassettes Stainless Steel size 14x17”
Cassettes Stainless Steel size 14x14”
Cassettes Stainless Steel size 12x15”
Cassettes Stainless Steel size 10x12”
Cassettes Stainless Steel size 8x10”
Cassettes Stainless Steel size 6.5x8.5”
Cassettes PLT/CC Kiran Make size 14”x14”
Cassettes PLT/CC Kiran Make size 12”x15”
Cassettes PLT/CC Kiran Make size 10”x12”
Cassettes PLT/CC Kiran Make size 08”x10”
Hanger Clip Type size 14”x17”
Hanger Clip Type size 14”x14”
Hanger Clip Type size 12”x15”
Hanger Clip Type size 10”x12”
Hanger Clip Type size 08”x10”
Hanger Clip Type size 6.5”x 8.5”
MMR
6.5”x8.5” Channel Type
SS Developing Tank 10 Gallon/45 ltr with Lid
SS Develping Tank 05 Gallon 22.5 ltr with Lid
SS Developing Tank 03 Gallon /13.5 Ltrs with Lid
X-Ray Film Cutter Desk Type with Handle
Lead Apron 40”
Vertical Chest Stand Mount
Safe Light
Red Adaption Goggles
Film Drying Cabinet
Film Drying Cabinet
Over head projector
Chest Stand Floor Model
Lead Screen Singel Penal with Fitted Lead Glass 8”x10”
Ray Proof Chair (Lead Chair)
View Box for Single Film 14”x17”
View box four in one 14”x17”
View box three in one 14x17”
1
1
1
2
4
1
3
3
1
1
20
1
2
1
4
4
3
4
6
6
10.000
0.250
10.000
0.300
40.000
5.000
10.000
1.500
300.000
3.000
2.000
2.000
6.000
40.000
0.500
0.500
1.000
2.000
0.400
0.050
14
14
16
18
17
15
25
27
3
3
17
24
85
110
100
20
24
2
1
18
12
4
4
1
2
4
2
1
1
4
2
3
1
1
6
28.000
28.000
32.000
36.000
17.000
15.000
37.000
41.000
2.000
2.000
8.500
12.000
40.000
33.000
20.000
4.000
12.000
0.500
5.000
54.000
24.000
3.000
22.000
5.000
2.000
0.800
100.000
50.000
50.000
100.000
150.000
120.000
5.000
30.000
120.000
Radiodiagnosis Deptt.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
60
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
View box Single 14x17”
Lead Sheet Film Divider 7.5”x16”
Human Skeleton Articulated with Wooden Stand
Steel Table Small
Wooden Table Big
Tunular Office Chair
Steel Folding Chair
Revolving Stool
Wooden Stool
Wooden Bench
BP Apparatus
Quard Angular EI Tray
Stainless Steel Tray with lid of size 11”x9”
Table Lamp
Laboratory Wooden Thermometer
Wheel Barrow
Steel Stools
Laryngoscope Set for Adult, Medium & Pediatric with four blades
Plastic Chair three in one
Ultrasonic Rector Player
Desert Cooler capacity 6000
Squire Pipe Bench 6’x2’x1.5’
Ambu Bag for adult and pead
Water cooler 150 ltr with 5 KVA Voltage Stabilizer
Four Cell Tupe Torch
Folding Chair with Cane
Folding Steel Chair
Wall Clock Crown Make
Stetho Scope
Voltage Stabilizer for AC 5 KVA
AC Capacity 1.5 Ton
AC Capacity 2 Ton
AC Capacity 1.5 Ton
Ceiling Fan
Exhaust Fan
Whole Body of CT Scan model SCT-3000 TF Shimadzu made
inJapan with parts with Air conditioner w in nos (Complete set)
Real time Colour Doppler Model LOGIQ-400 with accessories
Real time Colour Doppler Model LOGIQ-400 with accessories
Ultrasound Machines Portable Model L&T Selectra Model L&T
Selectra unit 1 sr. no. 3U 7188
Allenger 525/FC/Allopose 500mA X-ray unit with Fluroscopy with
accessories
SRD 725/500mA with Replacement Controlled DX-525 X-ray unit
with two nos. (complete unit)
6
3
1
2
2
3
2
1
3
7
2
6
1
1
1
2
6
1
1
1
2
3
1
1
1
1
1
1
1
2
2
2
1
29
6
1
36.000
3.000
30.000
50.000
50.000
40.000
20.000
10.000
20.000
150.000
2.000
6.000
1.000
0.500
0.020
60.000
30.000
20.000
20.000
20.000
50.000
60.000
1.000
150.000
0.500
5.000
5.000
0.200
0.200
20.000
200.000
200.000
100.000
290.000
30.000
1000.000
1
1
2
100.000
150.000
40.000
1
1000.000
1
1000.000
15
6
15
10
30
2
7
2
1
2
0.285
0.114
0.150
0.150
0.400
0.400
0.070
0.200
0.050
0.050
Deptt. of ENT
236
237
238
239
240
241
242
243
244
245
Artery Forceps
Artery Forceps
Towel Clip
Mirror Rhinoscopic
Laryngoscopic Mirror
Clare Head light with Transformer
Diamond Coated Burr
Eves Tonsilar Snare
Spectulum Nasal Thudicum
Spirit Lamp
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
61
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
Ellis Forceps
Chetle Forceps
Tonsill Bistury Mackenzie
Lempert Suction Tube
Scoop and Seeker Mastoid
Forceps Sponge Holding
Punch Forceps
Scissor for nasal Sinoscopy
Ball Probe
Biopsy and Grasping Forceps
Rhinoforce Stamberger antrun punch upright backward cutting
Forceps dissecting medium
Fiberroptic headlight band fited in Karl Storz
Fiber optic laryngoscopic carrier
Sickle Knife Microear Surgery
Tongue forceps
Septum Straighening Forceps
Gouge Jenkins
Walskam Forceps septum
Colline Vovhover bone elevator
Guthries autostatic cheek retractor
Chiron double hook rectractor
Waugh tissue dissection forceps
Retractor angle mouth
Oesophageal specimen forceps chevaliser Jackson
Chevalier Jackson Irwin moores forceps
Rhinoplasty Scissor
Scissor Iris
Scissor Straight
Microlaryngeal Sickle Knife
Micromotor with straight hand piece
Mastoid Retactor
Ear Dressing Forceps
Forceps aural dressing
Big Artery Forceps
Kings vein graft pressing forceps
Otoscope Fibralux fibreoptic complete
Hutchison Guillotine forceps with sliding blade for head of malleus
House Cutout adopter
Laryngeal fine cutting upward forceps
Foreign body removal forceps
Endaural Retractor
Endaural Retractor Right and left
Scissor and Forceps long laws curved to right and left
Cowthrone scissor crocodile action
Cowthrone’s forceps aural crocodile
Shea’s Forceps rocodile action
Forceps cup shaped fight and left turn
Forceps microanural cup straight right and left curved
Chevalier Jackson vocal nodule forceps 28cm length
Kerrison punch
Giraffe forceps double action cup, jaws, 3mm 55 degree
Automatic rocodile for fridge
Anuroid B.P Apparatus
Office Chair (wooden)
Office chair steel arms
Dressing Drum medium
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
1
6
22
1
1
2
2
1
1
1
9
1
2
1
2
2
3
1
1
1
4
5
1
4
1
4
4
5
1
2
4
14
9
1
1
1
2
1
1
3
5
2
2
2
7
10
4
12
4
1
1
1
1
2
2
6
0.010
0.050
0.060
0.100
0.010
0.050
0.050
0.020
0.010
0.020
0.030
0.050
0.150
0.010
0.010
0.010
0.050
0.150
0.100
0.050
0.050
0.100
0.050
0.080
0.200
0.100
0.040
0.040
0.050
0.100
0.500
0.150
0.100
0.070
0.020
0.020
0.100
0.050
0.020
0.030
0.150
0.150
0.070
0.040
0.030
0.080
0.100
0.040
0.100
0.150
0.250
0.150
5.000
0.500
5.000
6.000
3.000
62
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
Dressing Drum small
E.I Tray large
Examination Table
Pump with Nosal
Racked tray holder with stapedecomy
Iron Stool
Table office wooden with Raxin cover
Tailor Scissor
SS Bowl
SS Bowl
Sputum Mug
Dressing tray with cover
Enema cane
Feeding cup
IV stand
Jar with lid
Lock brass pad 2”
Torch two cell
EI Kidney tray
Dustbin Solid
UPS
Suction Machine
Desert Cooler capacity
Breast Trolley
Revolving Stool
Old Ceiling fan with long Rod 52”
Old Ceiling fan with long Rod 48”
Revolving Chair
Filing Cabinet
Dressing Trolley
Big Stool Wooden
Wooden Teepie
Torch three cell
Folding Chair iron
Confidential box
Room Heater
SS Bowl small size 5.5cm
SS Medium Size Dressing Drum
Scissor big for dressing
Brass pad lock 2”
Side rack
File Rack
Godrej office chair (Tubular)
PVC Chair set of 4
Table lamp angle fix
Desert Air Cooler with Two motor Two pump (2 with and 2 without)
HP Lazer jet Printer (HCL
Elkon EDA 3N3 Multi Audiometer
Bronchoscopic and Oesophagoscopic forceps universal biopsy,
double action jaws, diameter 1.5mm working length 35cm CAT no.
10372 UL
Rigid Suction tube
Cotton Carrier
Universal Biopsy and grasping forceps
Bronchoscopy and oesophagoscopy forceps
Mowson’s atraumatic end aural retractor
Harman rocodile aural forceps
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
4
1
1
1
2
1
1
1
4
2
1
2
3
5
1
4
3
2
5
1
1
3
8
1
2
13
17
1
2
1
1
1
1
9
2
1
1
2
2
1
2
1
2
2
1
4
1
1
1
2.000
1.000
20.000
1.000
0.500
2.000
25.000
0.200
0.250
0.200
0.250
0.500
1.000
0.250
20.000
0.500
0.250
0.500
0.500
5.000
50.000
15.000
80.000
10.000
3.000
39.000
51.000
10.000
50.000
6.000
5.000
10.000
0.500
13.000
3.000
1.000
0.050
3.000
0.500
0.200
6.000
3.000
8.000
16.000
1.000
80.000
5.000
20.000
100.000
1
2
1
1
1
1
10.000
10.000
50.000
50.000
50.000
10.000
63
Ward-11 (Eye Deptt, RIO)
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
Air conditioner with stabilizer
Desert Cooler
Godrej Almirah big
Iron Chair
Wheel Barrow
Break Fast trolley
Operating microscope
Corneal Scissor
Muscle Hook
Wire Speculum
Suture tie forceps
Needle Holder
Desceing Forceps
Artery Forceps
Electronic Needle Cutter
Wooden Benches
Schoctz Tonometer
Chappati Hot box
Medium SS Dressing Drum
(Shop Tailor) Scissor
Iron Stool
Godrej Almirah
Plain Scissors
Fine Forceps
Iris Repositors
Tooth Forceps
Corneal Iris Forceps
Enucleation Scissors Curved
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
Ceiling Fan with accessories
Air Conditioner
Desert Cooler
Wooden Bench
Wooden Testing
Godrej Chair
Iron Examination Table
Revolving Chair
Iron Revolving Stool
Vision Box
Servo-Voltage stabilizer
Iron Stool
Tent Chair
Basin Stand
BP Apparatus
White Writing board
Confidential box Godrej
Exhaust Fan
Sterilizer Electric
Enamel tray Catheter
Enamel Iron Bucket
Eye Model
Heat Convector
Iron Big Almirah Steel
Medium Lock
2
3
1
3
1
1
1
1
1
2
1
1
4
4
1
1
1
1
1
1
2
1
1
1
1
1
1
1
50.000
20.000
50.000
7.000
30.000
40.000
30.000
0.015
0.010
0.010
0.005
0.010
0.020
10.000
0.500
20.000
0.020
1.500
1.000
0.200
2.000
5.000
0.010
0.010
0.020
0.020
0.150
0.020
30
2
3
2
1
8
2
1
1
5
1
1
7
2
1
2
3
1
1
1
1
1
1
1
2
15.000
50.000
20.000
50.000
35.000
3.000
40.000
30.000
15.000
20.000
5.000
5.000
15.000
4.000
0.600
15.000
10.000
10.000
6.000
0.500
1.000
0.100
2.000
80.000
0.100
Eye OPD
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
64
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
Operating Light
Sign Board
Tonometer
Voltage Stabilizer 5 KVA
Wheel Barrow
Wooden Notice Board
Wooden Sign Board Name Plate
Table bell
Conjunctival Scissor
Wire Speculum
IOL
Artery Forceps
Suture typing forceps
Limbs forceps
Needle Holder
Scissor Curved
Punch
Superior rectus scissor
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
Iris forceps
Keratoplasty knife
Kunht FB Gauze
Ryeregt Shovel
Vanas Scissor
Artery Forceps
Chittle Forceps
Chalazion Tarsal jeis
Aruga’s needle holder
Castro vijo needle holder
Senial eye vactus
Needle holder braquer
Evisceration spoon
Superior rectus forceps
Iris Repositor
Dewaker scissor
Shop Scissor
Rollet Ragio sac
Castro vijo corneal suction scissor
Utility forceps toothed
Blade bracker holder
Evisceration scissor
Zuglar knife
Lacrimal Canula
Capsulorhexis forceps
Two way aspiration canual
Forceps corneal katazin
Corneal scelarl forceps
Tissue Forceps
Micro utility forceps Colibrie
Two way reverse canula
Tuving with steel adapter
Taflon handle adaptor
Conjunctival Scissor
Limbs forceps
Clay man lens holding forceps
BP Apparatus
1
2
2
2
1
1
11
5
1
1
1
2
3
1
2
7
1
2
1.000
15.000
10.000
10.000
15.000
5.000
0.500
0.100
0.010
0.005
0.005
0.010
0.010
0.010
0.015
0.015
0.150
0.100
10
1
2
1
5
15
2
3
5
4
2
15
2
10
12
5
1
3
6
9
6
2
1
4
6
10
4
3
7
6
1
1
1
5
6
6
1
0.080
0.010
0.020
0.015
0.080
0.200
0.100
0.020
0.100
0.060
0.020
0.300
0.030
0.060
0.100
0.050
0.100
0.040
0.050
0.050
0.050
0.020
0.020
0.020
0.050
0.020
0.040
0.020
0.040
0.050
0.010
0.010
0.010
0.050
0.050
0.050
0.600
ENT OT
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
65
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
Wet field cautery
Hallogen light
Wash Basin stand
EI Wash Basin
Sterilizer
EI Tray
SS Bowl
SS Dressing Drum Big
SS Dressing Drum Medium
SS Dressing Drum Small
SS Jug
Wooden bench
Wash Basin stand
Steel Rack
Chair
1
1
1
1
1
1
8
1
3
2
1
1
3
1
1
2.000
6.000
1.500
0.200
6.000
0.300
0.250
1.000
3.000
1.500
1.000
50.000
0.600
80.000
3.000
2
1
1
2
1
6
1
1
99
1
1
2
1
6
1
1
8
5
1
3
6
3
5
8
5
5
1
6
3
8
6
4
3
2
6
5
2
0.200
0.400
0.200
0.050
0.300
0.075
0.300
0.050
50.000
1.000
0.500
0.020
0.010
0.005
0.002
0.002
0.200
0.100
0.050
0.020
0.100
0.075
0.050
0.150
0.100
0.050
0.010
0.030
0.100
0.200
0.100
0.500
0.500
0.050
0.020
0.050
1.500
Mobile Unit
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
Illuminated near vision units
Disc Charges with two rechargeable handle
Ophthalmoscope 3.5v
Welch allyn rechargeable battery 3.5v
Halogen replacement lamp for 11610 alyn ophthalmoscope
trail frame
Streak retinoscope head 3.5 V halogen
Lamp bulb for Retinoscope
Iron bed
Steel drum
Film box
lens spatula
Goose
Probe
Roginsac
AC Cutette
Cornea suction scissor
Straight Scissor
Vanas Scissor
Wire Speculum
Blade Bracker
Burger Needle Holder
Corneal Forceps
Curved Scissors
Evisceration scissor
Irisa Forceps
Iris Hook
Plane Forceps
Punch
Tinotomy Scissor Straight
Straight Scissor
BP Handle
Cataract Knife
Capsule Forceps
Iris Repository
Lens Hook with wire vectus
Vertex Refractometer
Peadiatric Deptt. (Ward-2 NICU)
519
Heat Warmer V Care
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
2
200.000
66
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
Ventilator VIP Bird
Pulse Oxymeter Cardiovisual
Pulse Oxymeter Capnocheck
Transport Incobater
Flow Meter
Ambu Bag
Oxygen Key
Baby Weight Machine
Needle Destroyer
Wooden Chair
Cradle Stand
Halogen Heater
Laryngoscope
Pipe Wrench
Scissor
IV Stand
Screen
Pt. Trolley
Oxygen Hood
SS Drum Small
Table Lamp
541
542
543
544
545
546
547
548
549
550
551
Heat Warmer V Care
Ventilator VIP Bird
Sechrist Ventilator
Pulse Oximeter Cardiovisual
Zeal Incubator
NIBP EMCO
Halogen Heater
Sryinge Cutter
Hot Plate3
Ambu Bag
Ceiling Fan
2
2
2
1
5
10
2
1
4
1
3
2
2
1
1
1
1
1
1
1
2
200.000
1.000
1.000
50.000
20.000
5.000
5.000
10.000
4.000
10.000
10.000
6.000
2.000
0.500
0.500
2.000
3.000
20.000
1.000
5.000
2.000
4
3
1
2
1
1
2
1
1
5
5
50.000
100.000
30.000
10.000
50.000
10.000
10.000
1.000
1.000
0.200
10.000
1
2
5
2
1
1
2
3
1
2
2
1
2
1
8
2
3
3
1
1
1
3
20.000
30.000
25.000
4.000
2.000
20.000
40.000
30.000
20.000
10.000
5.000
4.000
10.000
15.000
3.000
5.000
3.000
4.000
10.000
10.000
2.000
0.300
Ward 14 (NICU)
Ward-16 -1
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
Sterilizer
Pt. Trolley
Bed Side Locker
BP Apparatus
SS Drum Small
Baby Weight Machine
Wheel Barrow
Office Chair
Phototherapy
Needle Cutter
Heat Blower
Halogen Heater
Wooden Chair
Adult Weight Machine
Oxygen flowmeter online
Suction machine on line
Oxygen Flowmeter
IV Stand
Oxygen Stand
Wheel Chair
Hot Plate
Ambu Bag
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
67
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
Laryngoscope
Iron Stool
Iron Pipe Table
Needle Cutter
Desert Cooler
Godrej Table
Chapati Box
Iron Stool
Cooler Stand
Food Trolley
Wooden Bench
I/V Stand
Tea Sterainer
Pt Trolley
Bed Side Locker
E.I. Tray
EI Basin
Wheel Chair
Computer with Printer & UPS
Pulse Oximeter Cardiovisual
Ceiling Fan
Iron Bed
IV Stand
Wheel Barrow
Wooden Chair
Iron Rack
Oxygen Stand
Wooden Bench
3
6
1
1
3
2
1
1
1
1
1
3
3
1
1
3
2
1
1
2
30
3
8
1
1
1
2
1
0.600
10.000
30.000
4.000
120.000
100.000
4.000
5.000
5.000
30.000
20.000
5.000
0.300
20.000
10.000
0.500
0.500
20.000
40.000
4.000
300.000
50.000
24.000
15.000
5.000
15.000
6.000
5.000
3
7
2
2
1
1
5
2
1.500
1.500
2.000
1.000
1.000
0.250
6.000
2.000
7
1
7.000
50.000
60
50
4
1
39
17
120.000
75.000
8.000
45.000
900.000
714.000
154
57
20
4
10
20
25.000
10.000
0.560
0.040
0.500
0.700
PICU
602
603
604
605
606
607
608
609
Ambu Bag big size
Ambu Bag small size
Flow Meter
Suction bottle
SS Drum Big size
Laryngoscope blade
Ceiling Fan
Halogen Heater
610
611
Heater Room Hungarian Type Complete Electric
Scale Ven Set Capacity 250kg plateform size 20x17 fitted with back
rail and mounted on four wheels
Tray size 1.8”x1.5”x1.2”
Rabbit Open Cage
Bucket Iron Capacity 12 ltr
Desert Cooler
Rabbit Cage for breeding
Rabbit Cage Stand
Animal House Deptt.
612
613
614
615
616
617
Deptt. of CSSD
618
619
620
621
622
623
Irrigation Cane EI
Instrument Tray Enamel Small Size
Artery Forceps Mosquito
Artery Forceps Curved
Artery Forceps Straight
Bowl SS 10cm
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
68
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
Towel Clip
Disecting Tooth Forceps
Disecting Plain Forceps
Needle Holder
BP Handle
Sponge Holding Forceps
Irish Scissors
Both Point Sharp Scissors
Tracheostomy Tube metal
Allies Tissue Forceps
Ceiling Fan
Exhaust Fan 15”
Exhaust Fan 18”
Tube Fitting Big
Tube Fitting Small
Water Cooler With Stabilizer
Dressing Drum 9”x9”
Steel Tray with Cover Size 12”x18”
Steel Tray with Cover Size 10”x12”
Basoli
Pipe Wrench 10”
Pipe Wrench 14”
Gally Pot China
Stool
Cardle for Filing Cabinet
Wooden Bench
Scissor
CSD Trolley
Plastic Tub Big/small/ Medium
Patient Trolley
Circulatory Laudry Trucks
Stainless Steel Irrigation Cane
Pressure Reducing Valve 1.5”
Gloves Drving Machine (Yorco Make)
Gloves Washing Machine (Yorco Make)
Bulk Sterilizer
5
35
20
30
5
22
50
60
10
1
2
2
2
15
1
1
3
20
10
1
1
1
15
1
8
1
1
1
6
1
2
10
4
1
1
2
0.050
0.450
0.450
0.800
0.120
11.500
0.600
11.500
0.100
0.050
10.000
4.000
5.000
7.000
0.500
80.000
1.500
7.000
2.500
0.300
0.500
0.600
0.300
1.000
0.400
40.000
0.400
45.000
5.000
25.000
12.000
1.500
60.000
100.000
100.000
500.000
1
1
2
1
10
4
30
15
30
1
2
2
1
4
4
2
1
1
4
7.000
50.000
25.000
0.050
2.000
0.800
3.000
1.200
1.500
10.000
4.000
100.000
10.000
240.000
1.000
19.000
4.000
100.000
2.500
Deptt. of Kitchen
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
Fan
Refrigerator 286 ltr
Desert Cooler
Torch
Thermos
Jug SS
Full Plate
Quarter Plate
Katori
Aluminum Trolley
GI Ration Bin
Weighing Machine with weight
PVC Chair 1 Set
Bulk Cooker
Karchi
Aluminum Patila
Stock Pot
Almirah Steel
Bucket Plastic
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
69
679
680
681
682
683
684
685
SS Glass
Aluminium Patila Cover
HP Rubber Tubing
Cylinder Pigtail Flexible
Adopter Pin type for cylinder
Burner Pitetail Cooper
Wheel Barrow Trolley
15
2
13.5
30
10
9
1
1.500
4.000
7.000
6.000
1.500
0.500
10.000
1
2
1
4
2
1
1
1
1
1
1
2
1
3
30.000
1.000
2.000
1.000
2.000
0.250
5.000
1.000
1.000
0.250
0.100
1.000
10.000
45.000
8
4
2
1
20
8
4
1
1
4
1
25
3
2
4
2
1
1
2
2
1
1
1
2
4
20
3
1
1
2
1
16.000
4.000
10.000
10.000
20.000
8.000
60.000
15.000
5.000
20.000
1.000
25.000
6.000
8.000
4.000
1.000
50.000
40.000
160.000
120.000
50.000
50.000
100.000
0.100
0.050
0.050
0.200
100.000
40.000
2.000
40.000
Neurosurgery Deptt.
686
687
688
689
690
691
692
693
694
695
696
697
698
699
Pt. Trolley
BP Apparatus
Electric Destroyer Machine
Oxygen Flow Meter
SS Drum
Tailor Scissor
A/C Stabilizer
Still Buckets
Hot Plate
Oxygen Key
Ambu Bag
EI Circal Zar Big
Wheel Barrow
Desert Cooler
Deptt. of Blood Transfusion
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
Donor Weighing Machine
SS Drum Small
Plasma Expressor
Over head Projector
Blood Weighing Scale
Needle Cutter
Centrifuge Machine
Centrifuge Machine
Iron Box
Iron Stool
Heat Blower
BP Apparatus
Microscope
Chair Godrej
EI Tray
EI Basin
Laminar Air Flow
Blood Storage Refrigerator (Remi)
Blood Storage Refrigerator (Jewet)
Blood Storage Refrigerator
Blood Storage Refrigerator Electrolux MRL 280
Electrolux Deep Fridger MRI 800 (Nuaire)
Deep Freezer
Micropipette Multichannel
Micropipette Singlechannel
SS Scissor
Flow Meter
Platelet Agitator With Incubator
Oven
Hot Plate
Wheel Chair
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
70
731
732
733
734
735
Desert Cooler
Air Conditioner
Voltage Stabilizer
Exhaust Fan
Ceiling Fan
3
3
10
2
22
20.000
210.000
40.000
10.000
160.000
7
1
2
4
1
1
4
12
1
3
3
2
3
3
11
14
1
1
1
1
1
2
1
1
1
1
2
21.000
0.200
4.500
15.000
0.100
1.000
5.000
0.200
60.000
1.500
2.000
0.150
0.010
0.010
0.400
0.200
4.000
0.500
0.030
20.000
0.100
0.200
0.100
2.000
150.000
80.000
5.000
Nephrology Deptt.
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
Ceiling Fan
Dial Bath Conductivity Meter
Voltage Stabilizer 4 KV
Voltage Stabilizer 5 KV
E-2 KidneyTray
BP Apparatus
I/V Stand
Kinfe Handle
Air Conditioner
SS Drum
BP Apparatus
Chietal Forceps
Vim Silver Needle
Vim Silver Needle
SS Scissor
SS Towel Clip
Weight Machine
Refracto Meter
ASP Needle
Wheel Barrow
Enema Cne
EI Knife Tray
EI Urinal
Chapti Box
Water Treatment Plant
Nipro Hemodialysis Machine
Pulse Oxymeter
Department of Medicine ( Ward-25 Medicine-III)
763
764
765
766
767
768
769
770
771
Flow Meter for Oxygen Supply
Syringe Cutter
Oxygen Flow Meter for Cylinder
Patient Wheel Trolley
Wheel Chair
Watch Type BP Apparatus
Hellgen Heater
Locks
Wheel Barrow
772
773
774
775
776
777
778
779
780
781
BPL ECG Machine 108, TMK VI with Accessories
BP Apparatus
Stetho Scope
Wheel Chair
Wall Clock
Torch 3 cell
Weight Machine
EI Jar Small
Feeding Cups
EI Tray
2
3
3
1
1
1
1
5
1
3.000
4.000
2.000
10.000
15.000
2.000
2.000
0.200
10.000
8
2
1
1
1
1
1
2
2
1
5.000
1.000
0.050
45.000
0.500
0.100
2.000
0.200
0.100
0.500
Central ECG/ Medicine-III
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
71
Ward-25 ICCU
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
Angle Iron
Ceiling Fan
Desert Cooler
Flow Meter on Pipe Line
IV Stand
Laryngo Scope with Blade
Steel Chair with Arm
Thermo Meter stand with small Ss Glass two
Flow Meter
Sponge Holder
Ambu Bag
EI Kidney Tray
EI Sputum Cup
EI Big Jar
EI Feeding cup
Tailoring Scissor
Hot Plate
Electrical Needle Syringe Cutter
AC Window
Nebulizer
Helogen Heater
Hot Blower
Vol. Stabilizer for Freeze
Volt. Stabilizer
BP Apparatus
Pedstrial Fan
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
Ambu Bag
BP Apparatus
Dressing Drum big
Laryngoscope
Dustbin
Oxygen Cylinder Stand
Iron Bed
IV Stand
Iron Stool
Steel Office Chair
Hospital Nursing Table
ICU Bed
Dressing Trolley
Suction Bottle
Nebulizer
Air Cooler
Ceiling Fan
Top Syring Pump
ECG Machine
Med Stress Computer
HP Brio BA 6000 Computer with Monitor, CPU etc.
Photostate Machine Modi Xerox mod 17”x11” EM 2000 Voltage
Stabilizer
1
3
2
4
3
1
2
1
2
1
1
3
2
2
4
1
1
1
3
2
5
1
1
3
6
2
2.000
9.000
48.000
0.700
12.000
0.500
4.000
0.200
0.300
0.100
0.300
0.300
0.100
0.500
0.200
0.400
0.800
0.800
45.000
2.000
2.000
3.000
3.000
6.000
6.000
16.000
3
10
2
2
1
4
2
7
10
4
1
1
1
1
1
3
2
1
1
1
1
1
0.500
2.000
1.000
0.250
5.000
10.000
50.000
5.000
5.000
7.000
30.000
70.000
10.000
0.500
2.000
20.000
10.000
4.000
10.000
100.000
20.000
10.000
Medicine Ward-3
Medicine Unit VI (Pul. & Critical Care)
830
831
Oxygen Flow Meter
Ambu Bag
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
4
3
2.000
1.500
72
832
833
834
835
SPO2 Probles
Ambu Bag
EI Bucket
Syringe Infusion Pump (Pilot Delta)
18
4
4
5
0.900
0.200
4.000
50.000
1
1
1
1
10.000
2.000
3.000
10.000
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
4
4
2
17
1
1
25
1
1
1
1
1
2
1
1
1
6
2
1
6
2
1
2
3
2
1
1
2
9
10.000
0.250
5.000
10.000
0.250
0.250
1.000
0.100
0.200
20.000
50.000
60.000
0.900
0.750
0.600
0.600
0.600
0.400
0.020
5.000
7.000
1.000
0.150
2.000
8.000
1.000
0.500
100.000
0.200
0.100
0.100
25.000
6.000
120.000
15.000
3.000
8.000
12.000
0.015
0.015
0.015
0.015
0.015
0.000
0.020
Main Dispensary
836
837
838
839
Wooden Chair
Stove Single Burner
Pestle Morter
Ceiling Fan with Regulator
Deptt. of Medical Illustration
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
Bench
Drafter
Folding Easel Wooden
French Curve Plastic
Instrument Box
Irograph Set
Paralled ruler brase
Scissor
Table Sharpner
Traching Table
Wooden Bench
Dryer Role Film AGFA
Camera Yashika 124G
Camera Yashika Mat
Camera yashika B
Camera yashika A
PVC Dish 12x15
PVC Dish 5x7
Forcep
Glazzing Sheet
Light Sonic Boom
Light Source Olumpus
Film Clips Junior
Trimmer Desk AGIL 13
Trimmeer Desk AGIL 12
Squeeze Roller
Tyr Pod
Wash Nozal
Extension Below
Close up Lens
Pointer Torch
Table Wooden
Office chair
Cup Board Almirah
Epidia Scope
Slide Projector Kinder Along Accessary
Over Head Projector (Photophone)
Electronic Type Writer with Accessory (Godrej 11513)
do- Wheel Tile NAR 10
do- Wheel Prestige-10
do- Diazy Wheel Press 12
do- Wheel Hindi Block
do- Courier Legal 10
do- Gothic Wheel 15
do- Ribbon Cassetes
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
73
885
886
887
888
do- Equaser Tape
RGB Lead 20 Meter
Lazer Pointer
Ribbon tape
20
1
1
14
0.010
3.000
0.015
0.025
4
3
1
1
6
4
2
24
2
1
1
3
2
5
1
2
10
14
4
2
1
5
30
16
1
2
1
30
1
1
6
6
1
1
1
15
3
15
2
1
4
3
1
2
2
1
4
1
2
30
1
2.000
0.005
3.000
0.010
0.100
4.000
2.000
0.200
10.000
2.000
0.020
0.050
1.500
0.050
2.000
0.050
2.000
0.100
0.020
0.050
0.050
0.100
3.000
0.800
0.050
0.100
0.100
0.500
0.050
3.000
0.100
0.050
0.010
0.050
4.000
0.100
0.100
0.300
0.200
0.050
40.000
0.050
0.100
1.000
10.000
2.000
0.500
1.000
0.500
0.100
0.050
Deptt. of Pharmacology
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
Balance Chemical
Brush nail
Balance Semi micro
BSS Test Sieves
Bowl Stainless Steel
Cage Mice
Cages Rate
Clamp Burette
Centrifuge Machine
Cork boring Machine
Diamond Glass Writing Pencil
Dubois Raymond Key
Electric Hot plate
Electrode Cloth Peg
Emulsi Fier
Enginners File
Electric Sterrer 220 Voltage
Forceps Bulldog
Buldog wire clamp
Forcep intestine holding
Forcep bowl lifting
Frog Muscle heart chamber
Frog board
Funnel E.I. (I, II, III, IV)
Float Recorder
Forceps lungs Holder
Forceps sterling Chetaers
Hook grips
Hot Water Funnel
Instrunemt Sterilizer
Knife Glass tube cutting
Levers Isometric
MM Thermometer
Membrange Menometer
Motor Single Phase
Morsey Key
Mycardiograph
Needle Aneurysm
Pistonn Recorder
Retractor cats paw
Recording drum
Spoon (I,II,III)
Self Retraining retractor
Smoker & Burner
Stand for smoker & Burner
Smoker & Varnisher
Simple Key
Smoking Stand
Sterington Stethograph
Scalpel Dissecting
Safety Razor
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
74
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
Tablet Pressing Machine
Time maker
Tray & Channel
Varnishing Tray
Water bath 8” dia with rings
Glass SS
Student Organ bath thermostatic
Student Jar bath
Room heater double rod
Room heater single rod
Patient Trolley cycle wheel
Brass Lock 2”
Angithi
Bucket iron
Folding chair steel
Black board
1
4
1
1
3
9
4
5
1
2
1
8
1
4
6
2
2.000
0.100
0.500
0.500
2.000
0.900
4.000
5.000
1.000
2.000
30.000
0.500
1.000
6.000
12.000
20.000
62
1
3
1
38
1
1
4
20
1
37
2
4
1
2
1
1
1
1
3
1
4
20
2
2
3
1
1
1
6
1
1
2
3
6
1
10
2
1
62.000
1.000
0.250
1.000
5.000
1.000
20.000
2.000
0.500
0.500
5.000
0.500
1.000
5.000
1.000
10.000
1.000
1.000
5.000
2.000
0.250
0.500
10.000
0.250
20.000
5.000
1.000
7.000
20.000
5.000
20.000
5.000
30.000
10.000
120.000
20.000
10.000
10.000
5.000
CHC Chiri
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
Radio
Pot. Stock
Kidney Tray
Microlight
Patromax
Office Tray
Baby Cot
Day Carrier
Temp. Chart Holder
Urinal (E)
CHV Trunck
Tray EI
JAR EI
Steblizer
BP Apparatus
TV B/W
Talwar
Karsi
Iron Rack
Belcha
Hathodi
Cultivator
Ceiling Fans
Mijer SS
Incubator
Material Stand
Kulhadi
Spray Machine
Color TV
Chairs
Refrigerator
Ex. Chair
Examination Table
Table
Bed Pati
Ice Box
St. Table
Screen Tubular
Office Tray
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
75
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
Iron Tray
Almirah
Godrej Table
Water Cooler
Iron Rack
Chairs
Bed Side Locker
Wheel Chair
Pt. Trolley
St. Bed
Patient bed
Revolving Stool
Store Iron
Film Stand
One Unit Soma Stallion Bucky Table with Three single Plax
Tansford 10 KVP with Control Panel
41
2
2
1
3
20
8
1
1
5
4
1
1
1
1
41.000
40.000
10.000
40.000
20.000
100.000
10.000
30.000
30.000
100.000
100.000
5.000
5.000
40.000
300.000
5
1
4
1
1
1
1
2
1
10
1
1
5
5
5
5
1
50
20.000
5.000
10.000
25.000
50.000
5.000
10.000
0.850
7.000
0.250
2.000
4.000
2.000
12.000
0.500
3.000
1.000
88.000
1
1
1
12
2
2
2
2
2
2
1
1
2
6
14
2
1
5.000
20.000
0.100
24.000
0.300
35.000
2.000
0.200
0.300
0.200
0.100
1.000
100.000
12.000
42.000
0.200
2.000
Deptt. of SPL-I
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
Wooden Easy Chair
Cardiac Table
Pt. Lockers
Pt. Trolley
Iron Hard Bed
Wooden Niwari Bed
IV Stand
OI Flow Meter
Wheel Barrow
Iron Lock
Iron Stool
Back Rest Iron
Kidney Tray
Plastic Bucket
Plastic Mug
Plastic dustbin small
Needle Cutter
Electric Fitting Palti
Deptt. of Pediatric Surgery
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
Hot Plate
Cabinet Filing
Cittal Forceps
Iron Stool
Oxygen Flow Meter
Wheel Barrow
Syringe Needle Cutter
Torch
Hot Water Bottle
Finit Pump
Suction Jar Supply
Stablizer Hylex
Desert Cooler
Exahust Fan
Ceiling Fans
Finit Pump
Weight Machine
Glucose Mfg Deptt.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
76
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
Nickle Spalula
Trolley Wheel Barrow
SSTray with Cover
Test tube rack ½” Alluminium
Test tube rack ¾” Alluminium
Test tube rack 1” Alluminium
Voltage Stebilizer 0.5KVA
Voltage Stebilizer 5KVA
Voltage Stebilizer 4KVA
Stool Iron
Dustbin Small
Wall Clock battery operated
20” Micron Cartridge for RO system
1” dia PVC pipe
Locks
Pipe Air Conditioner
SS Steel Clamp ½”
SS steel Clamp 1”
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
Silicon O Ring ½” and 1”
Stainless Steel top table 72”x30”x30”
Stainless Steel mixing tank 50 ltr
Stainless steel tank 400 ltr
Volumetric Bottle filling machine
Flame Photometer
Air Curtain
Air Conditioner clean air module
Adjustable digital micro pipette with top ejector
SS Cenrifugal pump
Stainless Steel mixing tank 200 ltr
Suctin Machine
Stainless Steel Services window
Sterility test unit
Digital Electronic balance cap 30 kg
Old replaced part of repaired equipment Drum for 12A type tonor
cartridge
Sunmica Top Table
1x40 box type tube fitting
Exhaust Fan 18”
Ceiling Fan
1078
1079
1080
1081
1
1
2
5
2
2
1
3
1
10
4
1
2
10
1
30 mtr
6 pc
2 pc
12 pc
4
1
1
1
1
2
1
1
1
1
1
1
1
1
1
0.010
15.000
0.200
0.050
0.050
0.050
2.000
12.000
4.000
2.000
0.100
0.100
0.200
3.000
0.050
5.000
50.000
1
40
4
5
10.000
15.000
4.000
7.500
4
3
1
1
1
1
3
1
1
4
1
5
2
5
2
1
0.400
0.300
3.000
0.300
1.000
0.300
3.000
60.000
10.000
4.000
30.000
10.000
5.000
15.000
20.000
50.000
0.050
20.000
25.000
50.000
50.000
15.000
10.000
15.000
0.100
10.000
30.000
5.000
3.000
5.000
5.000
0.100
Deptt.of Surgery (Ward-4)
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
Oxygen Flow Meter
Oxygen Flow Meter
Electric Needle & Syringe Cutter machine
Laryngoscope
Hot Case
Ambu Bag
Ss Bucket with lid
Refrigerator alwin Company with Chowki
Godrej Table with Draws
Bed Side Locker
Pt. Dressing Trolley
SS Dressing Drum Big Size
Iron Stool
IV Stand
Cardiac Table
Iron Bed
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
77
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
Electric Suction Machine
Electric Sterilizer
Pt. Troley
Halogen heater
Desert Cooler
Oxygen Key
Chittal Forceps
EI Urinal
EI Bed Pan
SS Food Tray
BP Apparatus
Voltage Stabilizers
PT Examination Table
Iron back Rest
Wheel Barrow
Wheel Charis
Exahust Fan
Syringe Infusion Pump
Ceiling Fan
1117
1118
1119
1120
1121
1122
1123
Desert Cooler
Steel Chair
Insect tube
Multi Chair set
Telephone Wooden Box
Finit pump
Wooden Table
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
Chart Holder
Ambu bag
BP Appartus
Bed Side Locker
Cardiac Table
EI Basin
Garden Embrella
Ho Plate
Heat Connector
Iron Diwan
Iron Bed
I/V Stand
Voltage Stablizer
Wooden Table
PV Examination Table
Wheel Barrown
Wooden Easy Chair
Water Cooler
Air Conditioner
Desert Cooler
Ceiling Fan
2
2
1
1
2
2
3
3
1
3
1
1
1
2
2
1
1
2
6
20.000
15.000
30.000
2.000
35.000
0.300
0.100
0.500
0.400
0.400
2.000
8.000
30.000
20.000
60.000
20.000
15.000
20.000
25.000
1
3
2
2
1
1
1
20.000
15.000
0.200
40.000
0.250
0.100
10.000
2
1
2
2
5
2
2
1
2
1
1
2
3
5
1
1
8
1
2
3
30
0.500
0.500
1.000
3.500
2.500
0.400
2.000
0.500
2.000
25.000
30.000
2.000
30.000
3.000
50.000
50.000
10.000
50.000
60.000
30.000
320.000
2
2
3
3
25.000
5.000
150.000
12.000
Reception
Special Ward-7
Deptt. of Surgery OPD
1145
1146
1147
1148
Wooden Bench
Wooden Stool
Wooden Table
Iron Chair
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
78
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
View Box
EI medium Tray
EI Bowl
Artery Forceps
Double Hook
Probe
Scissor
Plain Forceps
Tooteh Forceps
Allies Forceps
Sponge Holder
HB Meter
Head Mirrer
Tongue Disperser
Pt. Needle Cutter
Needle Cutter
Celling Light
Mobile Operation light
Godrej Table
Godrej Chair
Wooden Table
Examination Table
Wooden Chair
Iron Chair
Revolving Stool
Infant Weight Machine
EI medium Tray
Tailor Scissor
EI. Basin
View Box
T Handle
Bone Cutter
Wire Cutter
Practoscope
Desert Cooler
Ceiling Fan
1
2
2
6
2
1
2
2
2
4
6
3
2
2
1
1
1
1
1
1
1
2
1
15
4
1
10
2
6
1
1
1
1
5
4
16
10.000
2.000
0.002
0.200
0.100
0.020
0.100
0.050
0.050
0.150
0.300
0.050
0.200
0.100
0.250
0.100
200.000
100.000
30.000
8.000
50.000
35.000
12.000
12.000
7.000
3.000
0.500
0.350
1.100
10.000
0.170
0.190
0.200
0.100
50.000
85.000
2
2
7
1
5
1
3
2
2
1
1
8
6
3
3
10
1
1
1
80.000
100.000
700.000
20.000
10.000
0.500
0.500
0.500
1.000
0.500
25.000
25.000
10.000
25.000
20.000
0.500
50.000
17.000
5.000
Deptt. of Surgery Ward-6
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
Wheel Chair
Pt. Carring Trolley
Iron H. Bed
Wheel Barrow
Iron Stool
Laryngoscope
BP Apparatus
Syringe needle Cutter
Dressing Drum
E. Cane E.I.
Dressing Trolley
Bed Side Lockers
IV Stand
Back Rest
Voltage Stablizer
Flow Meter
Food Trolley
Computer Set
Heat Blower
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
79
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
Hot plate
E. Sterlizer
Wooden Bench
Steel Office Chair
Iron Tripot Stand
Mytonometer
Screen stand
SS Dustbin
Proctoscope
Timar Smita
Ss Jug
EI Big Tray
Revolving Chair
Over head Projector
Office Iron Tray
EI Catheter Tray
Exahust Fan
Wooden Table
Thermometer Stand
Nebulizer
Examination Table (Dressing)
Iron Bed
BP Apparatus
Dressing Drum
Big Scissor
1
4
2
3
2
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
2.000
10.000
30.000
30.000
0.250
0.250
10.000
5.000
0.250
0.050
0.200
0.500
20.000
10.000
0.500
0.200
1.000
20.000
0.200
0.300
10.000
110.000
0.500
1.000
0.100
2
15
16
2
4
4
6
15
5
1
4
4
3
10
20
4
2
2
1
5
2
20
8
25
20
2.000
2.000
5.000
40.000
20.000
50.000
20.000
10.000
60.000
10.000
20.000
0.500
120.000
10.000
10.000
4.000
40.000
40.000
20.000
120.000
100.000
10.000
400.000
200.000
200.000
2
1
1
60.000
50.000
20.000
Biochemistry Deptt.
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
Centrifuge Machine (Hand operating)
Pipette Box
Spirit Lamp
OverHead Projector
Electric Needle Syring Destroyer
Distillation Plant
Photo Electric Colorimeter
Automatic Piepttes
Exhaust Fan 15”
Compressor (0-0.5 KVA)
Ceiling Fans 48”
Locks
Desert Cooler
Aluminium Test tube stand
Test tube stand
Plastic Buckets
Semi Auto Analyzer (Transasia make)
Flame Photometer
Compressor without head of flame photomeer
Centrifuge Machine (R-8C)
Water Purification System (Milipore)
Volume Dispenser
Lab. Table (Low type)
Wooden Stool small (Teak wood)
Wooden Stool big
Deptt. of Psychiatry
1254
1255
1256
Food Service Trolley SS Tray
Desert Cooler
Wheel Barrow
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
80
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
Bed Side Locker
SS Bowel
Bed Side Locker
Bed Side Locker
BP Apparatus
Hot Plate
Iron Bed
Elec. Needle Destroyer
Iron Stool
Elec. Needle Destroyer
Wooden Table
Iron bed
Elect. Fans
Desert Cooler
Desert Cooler
Wooden Almirah
Student Chair Wooden
Iron Bed
Wheel Chair
Weighing Machine
Thermometer Stand Tray
Suction Machine
Godrej Office Chair
Elect. Needle Destroyer
Hellogen Heater
Large Painting
Small Painting
Water Cooler
Hot Case
Needle Cutter
Flow Meter
Oxygen Key
Wheel Barrow
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
ECT Machine C Cover
Bio-Feed Machine C
Photostat Machine
Pulse Oxy meter wih dura sensor and power code
Defibrillator BPL
Galipot Set
Iron Angithi
Mig E.I.
Record Syringe Glass
Scissors Small
Voltage Stabilizer
1301
1302
1303
1304
1305
1306
1307
1308
1309
Desert Cooler
Wheel Barrow
Steel Folding Chair Iron
Dustbin Godrej
Side Rack Iron
Ortho Shoulder ex. Iron Wheel
Almirah
Wooden Office Table Big Size
Halogen heater
8
8
20
15
1
1
1
1
3
1
3
5
10
5
1
3
3
1
1
1
1
1
1
1
1
3
5
1
1
1
1
1
1
80.000
1.600
150.000
150.000
0.500
0.750
40.000
3.000
15.000
3.000
20.000
40.000
10.000
100.000
50.000
150.000
30.000
120.000
40.000
2.500
0.200
25.000
2.500
3.000
1.500
0.500
0.200
120.000
2.000
2.500
0.100
0.100
20.000
1
1
1
1
1
2
2
9
1
3
2
10.000
10.000
50.000
10.000
30.000
1.000
2.000
1.000
0.200
0.300
9.000
1
1
3
1
1
2
1
1
1
27.000
20.000
7.000
2.000
10.000
14.000
35.000
10.000
2.000
Psychiatry OPD
Orthopedic OPD
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
81
Ward 21 (PPU)
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
BP Apparatus
Oxygen Flow Meter
Oxygen Outlet flow meter
Voltage Stabilizer
X-ray view box
Dressing Drum
Wooden Chair
Refrigerator
Temp Chart Holder Trolley
Steriliser
Wall Clock
Enamel Tray 6x9”
Wheel Barrow
Food Trolley
Patient Trolley
Exhaust Fan
Enamel Tray 11x9”
Desert Cooler
Water Cooler
Air Cooler motor
Air Cooler water pump
Ceiling Fan
Air Mattress
2
2
1
1
1
2
1
1
1
2
1
1
1
1
1
2
1
3
1
1
2
29
6
2.000
0.150
0.500
10.000
2.000
3.000
20.000
60.000
20.000
10.000
0.500
0.100
15.000
20.000
20.000
5.000
0.150
30.000
50.000
1.000
2.000
232.000
3.000
2
2
1
1
2
1
1
1
3
4
2
3
2
2
1
8
5
30.000
0.500
15.000
0.500
1.000
5.000
0.250
1.000
2.000
5.000
0.500
7.000
4.000
20.000
15.000
40.000
20.000
2
1
1
1
1
1
3
2
1
40.000
40.000
0.500
1.000
5.000
1.000
0.600
0.300
1.000
Ward- 8 (ONCO)
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
Desert Cooler
Flow Meter
Wheel Barrow
Ambu Bag
Wall Clock
X-Ray View Box
Torch Two Cell
Electrical Needle Destroyer
EI Bed Pan
E.I. Bucket
E.. Enema Cain
SS Bucket
SS Drum Medium
IV Stand
Dressing Trolley
Bed Side Locker
Godrej Chair
1350
1351
1352
1353
1354
1355
1356
1357
1358
Desert Cooler
Iron Hard Bed
L. Scope with 3 blade
BP Apparatus
PVC Chair (set of 4 chairs)
Chapatti Box
Torch 2 cell
Finit Pump
T. Scissor
Cardiology Ward
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
82
LSL OPD
1358
1359
1360
1361
1362
1363
1364
Office Chair
Small Iron Chair
PVC Chair Set
BP Apparatus
Water Cooler
Wooden Table
Desert Cooler
4
1
3
3
1
1
3
16.000
3.000
20.000
3.000
60.000
10.000
60.000
1
2
6
2
1
20
1
4
2
1
7
2
2
1
1
1
5
2
1
1
2
4
1
7
3
2
3
1
1
2.000
0.500
15.000
3.000
0.100
50.000
25.000
4.000
0.500
1.000
3.000
0.500
1.000
0.050
0.250
0.500
0.200
0.600
5.000
10.000
2.000
0.500
20.000
3.500
0.500
1.000
0.500
1.000
2.000
2
1
3
2
3
10
15
1
45
14
10
20
1
18
0.500
5.000
0.750
0.500
3.000
5.000
6.000
1.000
4.500
1.500
0.250
4.000
5.000
1.800
Ward-10(Medicine)
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
Suction Machine
Godrej
Desert cooler
Voltage Stabilizer 3 KVA, 2.5KV
Table lamp
Ceiling Fan
Examination Table big
Exhaust Fan
Waste Paper Bucket
X-Ray view box
Tulo pump
Ambu Bag
Hot Plate
Cittle Forceps
Tailor Scissor
Iron Pipe Wrinch
Oxygen Flow Meter
Electrical Needle Cutter
Height and Weight Machine
Wheel Barrow
Visiting Chair four setter
BP Apparatus
Pt. Trolley
BP Apparatus
Wall Clock
Iron Stool
IV Stand
Back Rest
Iron Pipe Bench
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
Valve Gauze
Audio Meter
Smoing Burner
Burner Byepas
Bracket of Ophthalmic
Students Jar Bath
BP Apparatus
Barometer
Binding post for low voltage
Frog Board
Contact Block
Comutator Pahl’s
Context-55 Calculating Machine
Chamber Frog Muscles
Physiology Deptt.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
83
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
Adam’s 6 unit lab Counter
Cautery
Cardiograph for recording cardiac apex beat
Drop counter Recorder
Heamatorcit Centrifuge Machine
Diagnostic Set
Dynometer
Drum Recording
Aerograph Moss’s
Ergograph bicycle
Electrode non Plasaried
Extension for long paper
Ishara Chart
Induction Coal
Intruptter variable
Key Combined Reversing
Key’s Short circuiting
Key tapping
Key reversing with table clamp
kymograph Research complete
Laryngo scope
Lantern Edridge Green
Lamp head electric
Membrane Manometer
Head Mirror
Needle Cataract
Ophthalmoscope without body
Heart Perfusion
Perimeter
Respiratory pump
Stethograph
Stabilizer
Small Krough Spirometer
Plethysmograph lung
Spirometer
Scale for weighing
Transfarmer step down
Time maker single magnet
Two way time maker
Direct Writing time make
Viberating Reed
Pre amplifier P-16
Pre Amplifier P-15 with battery pack
Oscilloscope No. BO 1161
Inco Research Stimulator
Student Physiograph with Transdusor and Accessories
Polyrite 4 channel model 80 complete
Constant Voltage stabilizer 2.5KVA
UPS 1 KVA
Lever Myograph
Research Microscope
Stereoscopic Microscope USSR Make
Micro Light
Micro Lamp
Microscope German
Microscope Laboratory
Microscope Olympus GB
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
2
2
2
2
1
1
5
6
2
8
5
4
10
14
20
10
15
30
1
3
1
4
1
8
15
1
1
6
1
5
3
10
2
2
2
1
10
10
5
10
1
1
1
1
4
1
1
1
30
2
1
35
30
5
2
29
0.100
10.000
0.400
0.200
6.000
0.500
1.000
20.000
30.000
80.000
10.000
5.000
1.000
5.000
7.000
5.000
5.000
1.000
12.000
80.000
0.600
1.000
0.400
0.150
0.800
0.200
0.020
20.000
30.000
20.000
0.500
45.000
10.000
0.500
20.000
10.000
10.000
1.000
2.000
1.000
10.000
2.000
2.000
20.000
10.000
40.000
20.000
10.000
10.000
0.050
15.000
10.000
70.000
60.000
25.000
10.000
150.000
84
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
Microscope Monocular Olympus Japan
Teacher Microscope with Mechanical Stage
Stage Micrometer
Camera Lucida
Micro Tomes and Freezing Microtome
Mechanical Stage
Slide Cabinet
Slide Boxes
Bell Jar Glass
Haemocytometer
Tiles black 6”x6”
Tile White
L Shapped Blocks
Microscope eye piece
Micro Projector
Epidiascope
Eye Piece 10X
Machanical Stage
Objective 10X
Oil Immersion lens
Balance Analytical
Balance Analytical
Centrifuge Machine
Double Distillation apparatus
Exposure meter
Hair Dryer
Hot Air Fan
Lamp with spair tube
Spectroscope
Oven 220V 16”x16”x20
Planimeter
PH Meter
Pump Air Section apparatus
Stand Iron
Stand Test tube
Stand Tripot Iron
Sterror Magnatic
Timer
Weight Box
Burret Holder
Lamp Electric
Corck Boaring Machine
Toshiniwal Micro wel Glinder
Fire Extunquister
Fire Extunquister Tube
Fire Extunquister Bucket
Filing Cabinet
Henger for bucket
Card Index Cabinet 4 drawer
Hot plate
Heat Convector
Cat box with glass frame
Aluminium Cage for Rat
Pocket Calculator
Sliding Chair for patient
Floopy disk
Automatic Stabilizer
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
7
8
2
2
2
14
2
31
3
8
10
25
37
4
1
1
45
28
40
25
1
1
1
2
1
2
1
1
5
1
1
1
1
35
22
28
1
14
3
38
1
1
1
2
2
9
7
7
4
6
7
2
53
2
1
40
4
35.000
40.000
1.000
8.000
25.000
5.000
2.000
10.000
3.000
1.000
1.000
2.000
2.000
0.100
5.000
20.000
1.000
2.000
1.000
1.000
7.000
5.000
200.000
10.000
1.000
0.500
8.000
1.000
5.000
12.000
0.500
1.000
25.000
15.000
0.010
3.000
1.000
2.000
0.500
12.000
1.000
0.500
3.500
7.000
0.200
4.500
40.000
0.350
20.000
6.000
7.000
10.000
26.000
0.200
10.000
4.000
10.000
85
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
Philips Mike LBD 8203
Sound Column
DGN Stand
Philips 2t Watt solid state amplifier
Desert Cooler
Wheel Barrow
Trolley long size
Computer chair
Stereoscopic Instrument
Allwin Refrigerator
Basin EI
Basin EI 20.32cm
Jar EI circular 5 ltr
EI bucket
EI Jar circular 1 ltr
EI Jar circular ½ ltr
EI Instrument Tray
Forceps Peritonium
Forceps Tissue
Forceps Artery 4”, 5” 6”
Forceps Bone Cutting
Scissor Iris
Scissor Small Fine Point
Scissor
Dissecting Boxes
2
4
1
8
1
1
1
1
1
14
2
5
5
5
5
5
26
12
9
2
2
5
20
7
1.000
2.000
4.000
4.000
75.000
25.000
20.000
10.000
3.000
30.000
0.700
1.000
5.000
5.000
2.500
1.500
2.500
0.300
0.100
0.100
0.200
0.020
0.050
0.100
0.700
1
4
7
20
10
20
1
1
1
6
2
30
10
20
1
2
1
2
1
1
1
2
50
1
14
3
10
4
1
60
0.200
1.000
0.200
0.600
0.300
0.200
0.080
0.200
0.200
2.800
0.500
1.000
0.300
1.000
1.000
0.100
0.020
0.020
0.050
0.020
1.000
0.500
10.000
0.250
1.000
6.000
10.000
2.000
3.000
8.000
2
Accident & Emergency Deptt.
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
T Handle Key
Hand Drill Machine
Anurysan Needle
Artery
Bowl SS
Disecting Forceps Toothed
Forcep Kocher
Bone Holding (Big)
Bone Holding (small)
Dressing Drum (Big)
Dressing Drum (small)
Foreps Artery
Forceps Cheetal
Forceps Scissor Straight
Hand Drill Machine
Mouth Gog
Curette Dental
Mouth Mirror
Utrine Sound
H. Dialater
Bucket EI
Catheter Tray
Bed Pan
Enema Can
Lock
Stand Cooler
BB Splint
Board
Foot Step
Oxygen Flow Meter Jar on line
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
86
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
Oxygen Flow Meter Jar on line P
Suction Online P
Wall Clock
Oxyten Key
Dressing Tray
Fixo Grape Board
Bed Iron
Folding Bed
Bed Side Locker
Bench Wooden
Chair Four Set
Iron Rack
Student Table
Table Office
Oxygen Cylinder Stand
Back Rest
Wheel Chair
Chair
Cardiac Table
Shoe Rack Wooden
Revolving Chair
Computer chair
IV Stand
IV Stand
Iron Screen
Patient Trolley
Patient Trolley
Wheel Barrow
Wheel Barrow
Stool
Almirah
Compartment locker
Fowler Bed
Kidney Tray
Studio Light
Trolley Instrument
BP Apparatus
Weight
Weight Machien Pead
Weight Machine
Ambu Bag Adult
Ambu Bag Pead
Larangoscope Pead
Larangoscope Adult
Oxygen flow meter
Dressing Trolley SS
Ceiling Fan
Ceiling Fan
Refrigerator
OT Light
Suction Machine
Neelde Cutter
Cooler Pump
Voltage Stabilizer
Air Cooler 3 without moter
Wall Fan
Halogen
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
30
26
2
8
5
1
35
2
2
2
4
1
2
3
9
3
4
20
2
2
3
1
9
30
3
5
10
1
1
2
2
1
2
5
1
5
15
5
2
12
18
15
4
10
70
1
65
15
1
1
3
25
1
7
7
4
9
4.000
5.000
0.500
1.500
4.000
5.000
200.000
10.000
4.000
30.000
16.000
15.000
10.000
30.000
10.000
9.000
20.000
30.000
6.000
10.000
30.000
7.000
18.000
40.000
12.000
50.000
100.000
10.000
10.000
4.000
140.000
80.000
40.000
0.500
2.000
15.000
13.000
10.000
4.000
10.000
3.000
3.000
1.000
2.000
2.000
10.000
180.000
30.000
20.000
10.000
2.000
7.000
0.250
15.000
70.000
4.000
4.000
87
1634
1635
1636
1637
1638
1639
1640
1641
1642
Exhaust Fan
Air Conditioner
Split Air Conditioner
Podester Fan
Ceiling OT Light
Nebulizer
Nebulizer
Phototherapy Trolley
Dead Body Cold Storage Cabinet
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
Syringe Pump B. Braun
Syringe Pump B. Braun
Lohmier Monitor 1179, 1180, 1182
ECG Machine Eli-100
SS Dressing Drum
Suction Machine
BP Apparatus
Wheel Barrow
Tailor Scissor
Electrical Cutter
Iron Stool
Wheel Chair
Pediatric Ventilator
6
1
1
1
2
2
2
1
1
10.000
50.000
25.000
3.000
50.000
1.000
1.000
10.000
150.000
4
1
3
2
1
2
3
1
1
1
2
2
1
1.000
1.000
10.000
20.000
1.000
25.000
0.500
30.000
0.200
2.000
10.000
25.000
35.000
4
1
2
1
1
1
1
3
1
8
1
1
2
2
1
1
1
1
4
1
120.000
2.000
0.250
0.600
60.000
0.500
80.000
12.000
0.500
0.100
0.200
1.000
0.500
0.500
5.000
2.000
2.000
2.000
35.000
3.000
2
1
1
1
1
1
1
1
1
8.000
5.000
10.000
2.000
1.000
1.000
20.000
12.000
5.000
Cardiac Surgery ICU
Cardiac Surgery Ward
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
Desert Cooler
Electric View Box
Lock
Needle Cutter
Patient Trolley
SS Bucket
Water Cooler with Stabilizer
IV Stand
EI Bucket
EI Sputum cup
EI Knife tray
EI Catheter Tray
EI Bed Pan
EI Feeding cup
Dirty Bag Stand
SS Drum
SS Bucket
Hot Plate
Iron Hard Bed
Nebulizer Machine Elect.
1676
1677
1678
1679
1680
1681
1682
1683
1684
Laproscope GDR
Laproscope KLI
Laproscope KLI
Phiplips Medical Diathermy
Bipoler Coagulator coutery
Cyro Plus
Operation Chair Motor
Television Transmission Laprscope
Hysteroscope with Deffector
Deptt. of Obst & Gynae
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
88
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
Autocon High Frequency unit
Binocular loop
Laproscopic Teaching Aids
Trocar and Cannula
Laproscopic Scissor
Laprosopic Punch Biopsy Forceps
Operation Table Major
Ceiling Ot light
Medium Steel Drum
Big Steel Drum
Small Steel Drum
EI Feeding cup
Small Steel Bowl
EI Catheter Tray
EI Kidney Tray
EI Bucket
Steel Dressing Tray with lid
EI Big Dressing Tray
Wooden Stool
Head Light
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
Large Size Iron Almirah
Iron Chair Folding
Iron Stool
Wooden Table 3x2x2.5
Wooden Table large size
Wooden Stool
Wooden Chair
Wooden Bench
Brass Locks
EI Basin
EI Small Tray
Tongue Depressior
Electric Call bell
Feeding cup
Viewing box
Foot Step Iron
BP Apparatus
EI Specimanyrezar
Examination Couch Small Wooden
Examination Couch Wooden large
SS Scissor 8”
CH4, PVC Chair set of four chair
Iron Chair
Iron Chair Full arm squiare pipe
Office Chair Steel
PVC Chair
Large Size Almirah
Wooden Table
Electric Cutter
Iron Chair
1
1
1
1
1
1
2
1
5
4
2
2
3
2
10
1
2
2
1
3
50.000
100.000
1.000
10.000
0.050
0.010
100.000
30.000
5.000
8.000
2.000
0.100
0.200
1.000
2.000
1.000
1.000
2.000
5.000
1.000
2
12
17
2
3
5
2
3
2
4
1
4
4
2
2
4
15
1
3
1
1
15
3
10
2
2
1
2
1
1
50.000
10.000
5.000
20.000
50.000
10.000
15.000
25.000
0.100
0.200
0.500
0.050
0.200
0.200
5.000
10.000
5.000
5.000
25.000
40.000
0.500
30.000
0.500
18.000
20.000
50.000
50.000
25.000
5.000
5.000
2
2
2
30.000
2.000
30.000
MOD
Ward-12 (Ortho)
1735
1736
1737
Wheel Barrow
Needle Cutter
Iron Bed
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
89
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
Hot Plate
Godrej Almirah
Iron Stool
O2 Flow Meter
Exhaust Fan
Ambu Bag
O2 Key
IV Stand
Celing Fan
Air Cooler
Cardiac Table
Laringo Scope
Dressing Trolley
Ceiling Fan
Back Rest
BP Apparatus
Chetal Forceps
Medicine Trolley
Bed Side Locker
Godrej Table
BB Splint
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
Artery Forceps
Allice Forceps
Chetal Forceps
Sponge holder
Kocher Forceps State
Mayo Needle Holder
STD Dissecting Forceps
Metzen Haum Scissor Curved
Mayo Scissor Heavy 15cm
Mayo Scissor Heavy 15cm Curved
Sims Utrine Scissor 200mm Stat
2
2
6
5
2
1
2
20
50
1
4
2
1
10
10
4
4
1
5
3
125
1.000
70.000
12.000
0.020
20.000
0.200
0.100
100.000
250.000
20.000
20.000
0.100
5.000
20.000
50.000
2.000
0.200
10.000
10.000
210.000
125.000
16
30
6
8
11
12
1
1
1
6
1
0.020
0.250
0.050
0.050
0.020
0.020
0.010
0.010
0.010
0.010
0.010
1
15
2
3
1
6
5
1
10
3
4
5
4
5
10
1
3
1
3
1
1
20.000
75.000
60.000
15.000
0.500
3.000
50.000
6.000
0.500
90.000
40.000
25.000
0.400
200.000
25.000
0.200
6.000
2.000
1.500
15.000
2.000
Obst & Gynae (LROT)
Ward-2 (Obst & Gynae)
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
Ultra Sound Machine Model P- 600 Philips
Ceiling Fan
Desert Cooler
Exahust Fan
Ambu Bag
BP Apparatus
Bed Side Locker
Electric Sterilizer
EI Kidney Tray
Godrej Almirah
Godrej Chair
IV Stand
Lock
Iron Bed
Iron Stool
Laryngoscope
SS Drum
Iron Screen
Needle Cutter
Wheel Barrow
Weight Machine
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
90
1791
Voltage Stabilizer
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
Allice Forceps 6”
Allice Forceps 7.5”
Artery Curved
BP Handle
Ceettal
Sponge holding Forces
Tooth Forces
Non Tooth Forces
Needle Holder Fine Spring Type
Needle Holding Medium Forceps
Valsullum
Kocher Forceps Curved
Towel Clip
Scissor Curved
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
Centrifuge Machine
Doppler
Incubator (Oven)
Pelvimeter
Cautery Corrical
Examination Light
OT Table
Hospital Nursing Table
Godrej Table
Rexin Table
Folding Chair
PT Trolley
Wheel Chair
Wooden Bench
Examination Table
Foot Step
Tenaculum
Blunt Currete
Blunt & Sharp Currette
Plain Forceps
Iron Bed
Cerrical Biopsy Currette
Ufrine Sound
Utrine Curette
O2 Cylinder with key
EI Tray with Cover
EI Baby Bath Tub
EI Basin Size Big
EI jar
SS Drum Big
SS Drum Small
SS Drum Medium
SS Bowl Large
SS Bowl Small
SS Glass
Locks
Coplin Zar
Torch
4
16.000
1
2
3
1
6
2
3
2
1
1
1
6
1
4
0.050
0.060
0.020
0.020
1.200
0.080
0.060
0.020
0.020
0.050
0.100
0.540
0.010
0.080
1
1
1
1
1
2
1
1
2
2
6
1
1
3
6
3
3
1
2
5
1
1
2
2
1
1
2
5
4
1
3
2
5
7
6
9
4
3
10.000
2.000
20.000
5.000
2.000
5.000
10.000
15.000
20.000
15.000
5.000
10.000
10.000
15.000
10.000
10.000
5.000
0.200
0.200
0.200
0.100
0.200
0.100
0.100
5.000
0.200
0.500
0.300
0.200
3.000
2.000
2.000
0.500
0.200
0.100
0.200
0.050
0.100
G.O.T.
GOD Deptt.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
91
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
MR Syringe
MVA Plus Kit with aspirator
Ovum Forceps
Sponge Holding Forceps
Vallisellium
CUSCO Speculum
Endometrial Biopsy Curette
Packing Forceps
Table Light
EI Basin (small)
Award Speculum
Sim’s Speculum
Chittle Forceps
Cervical Biopsy Forceps
Scissor Straight
Microscope
Wheel Barrow
Syringe lifting forceps
Flushing Curette
X-Ray View box
Dilator Set
Water Cooler
Acs Condition
Stabilizer
Desert Cooler
Paedistal Fan
Suction Machine
Sterilizer
Electric Coutry
Ceiling Fan
Weight Machine
DVD Player
Incubator Hot Air Oven 14x12
Ultrasonic Machine
Real Untrosonic Medical
Dr Chair with Arm
Book Rack Almirah
Closed Rack Filling Cabinet
Examination Table
Wooden Table
Wooden Bench
Wooden Chair with arm
Folding Chair Ron
Examination Light
BP Apparatus
Parabhal Stove
1
1
1
3
2
190
2
1
2
2
1
7
2
2
2
1
1
2
1
4
2
1
2
2
3
1
2
3
5
3
9
1
1
1
1
5
3
3
3
1
4
4
9
7
8
1
0.050
0.100
0.500
0.500
0.200
0.200
0.100
0.050
0.200
0.050
0.050
0.050
0.100
0.100
0.050
10.000
5.000
0.100
0.100
0.200
2.000
50.000
25.000
5.000
15.000
10.000
20.000
10.000
5.000
5.000
1.000
5.000
25.000
50.000
15.000
5.000
20.000
20.000
10.000
10.000
8.000
5.000
2.000
2.000
1.000
0.500
45
10
4
54
18
29
8
1
6
0.200
0.400
0.500
0.400
0.020
2.000
1.500
0.750
0.200
SPORTS
1890
1891
1892
1893
1894
1895
1896
1897
1898
Valley Ball
Valley Ball Net
Valley Ball Net Wire
Basket Ball
Basket Ball Net
Foot Ball
Badminton Net
Air Pump
Volley Ball Shooting
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
92
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
Javelin
Cricket Bat
Cricket Kit Bag
Batting Gloves
Wicket Keeping Gloves
Wicket Keeping Pad
Cricket Ball
Cricket Stumps
Discuss
Rope
Tenni Coit Ring
1910
1911
1912
1913
HP Brio Computer Set (CPU , Monitor)
Infinite Plus HCL Computer Set CPU and Monitor
Stabilizer of AC
AC 1.5 Ton (Voltas)
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
Ceiling Fan 56”
Ceiling Fan 48”
Many Fold 2x6 for 12 cylinder with two delivery valves
Main line sheet of valve with union set
Flexible Cylinder pigtail 2 feet long both side FECV nuts
SC Adapter
HP Regulator adjustable 0 to 15 psig
Low pressure regulator 0.5psig
Copper Cylinder Pigtail 2 feet long both side FECV nuts
Double bottle connection 12”
Needle Control valves 3/8” BSTM
Flexible burner pigtail with 3” long
Brass adaptor ½” MECV 3/8” BSTM
Double burnder 48” X 24”x 34” SWIG cip/ supports frame work
mild steel angle size 12” pannling one T-35 and One M-32 burnders
with control
Canteen Burner
Bhagona SS with Cover
EI Bucket
Chimta Iron
Donga SS without handle with lids
Donga SS without handle with lids
Full plate SS
Harison Small locks
Jug SS
Kadu Kash Iron
Kattle Alluminium
Karchi Brass
Big Locks
Tumber SS
Toster Jaw Iron
Teaspoons
Torch Two Ceils
Voltage Stabilizer
Finit Pump
Khurpi SS
Sauce Plate
Table Knife
3
30
2
10
3
1
196
30
4
1
2
0.800
0.400
1.000
2.000
1.200
0.700
0.200
9.000
1.500
10.000
0.200
1
1
1
1
20.000
20.000
30.000
100.000
3
7
1
1
12
12
1
1
1
1
5
3
2
1
20.000
45.000
10.000
0.200
1.000
1.000
0.100
0.150
0.100
0.100
0.100
0.200
0.100
70.000
1
2
5
2
2
2
10
10
6
1
1
1
3
6
3
54
2
1
1
1
4
1
2.000
3.800
5.000
0.200
0.200
0.250
1.000
0.500
1.000
0.200
0.400
0.100
0.300
0.300
0.200
0.500
0.300
3.000
0.600
0.750
0.150
0.200
Biostatics Deptt.
Nursing Hostel
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
93
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
Rise Dish Plate
Bed Wooden with Back
Bed Wooden
Dinig Table Sunmica top
Office Chair Wooden
Stool Wooden with Can
Iron Bed Folding
Iron Pipe Bed
Visitors chairs
Dinig Chair Iron Steel
Only Soffa with back squiar pipe
Dining Table Sunglass
Iron Steel Pipe Chair G type
Easy Chair Wooden
Office Iron with Arm Chair
Soffa Set with two Soffa Chair
Steel Chair with Seat or back Iron
Iron Steel Romm Chair
Iron Steel Bed
Tepayees Wooden
Iron Steel Bed
Steel Table Sunmica Top
Wooden Table with one daraz
Ceiling Fan 56”
Ceiling Fan 48”
1
3
149
5
2
17
8
4
1
10
1
1
10
65
25
1
11
25
8
49
17
30
30
11
44
0.500
45.000
1192.000
160.000
6.000
25.000
700.000
28.000
10.000
30.000
30.000
10.000
20.000
231.000
120.000
50.000
40.000
100.000
400.000
190.000
850.000
111.000
120.000
110.000
352.000
4
3
4
2
1
4
6
4
3
4
1
4
3
1
3
1
1
1
1
2
4
1
3
2
1
1
20
1
1
4
3.500
2.500
2.000
1.500
4.000
30.000
4.000
1.000
60.000
5.000
25.000
10.000
30.000
25.000
1.500
40.000
50.000
3.000
45.000
35.000
0.575
1.500
20.000
40.000
60.000
80.000
200.000
60.000
0.010
1.000
Ward-5 (Surgery)
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
Voltage Stabilizer
Hot Plate
Electric Needle Cutter
Halogen Heater
Heat Converter
Desert Cooler without moter and fan (3 nos)
Ceiling Fan
BP Apparatus
Iron Bed
Office Chair
Patient Trolley
IV Stand
Dressing Trolley
SS drum big
SS Drum Medium
Centrifuge Machine
Sterilizer big
X-Ray View box
Wheel Chair
Dustbin stand
Flow meter
Micro scope
Iron back rest
Bed side locker
Refrigerator
Air Conditioner
Ceiling Fan
Epidia Scope
Epidia Scope bulb
Photo album 12x12
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
94
2005
2006
2007
2008
2009
2010
2011
Photo album 18x14
Slide Boxes
Slide Rule
Nebulizer
Bed side locker
Flower bed
Pt. Trolley
4
5
1
1
10
5
1
1.000
0.100
0.100
2.000
20.000
60.000
25.000
2
2
4
6
1
1
1
4
2
2
2
2
2
1
1
2
1
12.000
6.000
12.000
9.000
0.500
4.000
1.000
2.400
10.000
170.000
40.000
6.000
3.000
1.500
1.000
0.400
1.500
1
1
1
2
1
35.000
40.000
20.000
120.000
15.000
1
15.000
1
10.000
1
20
1
16
9
22
1
5
9
4
19
1
2
1
3
1
6
3
16
40.000
45.000
3.000
40.000
20.000
50.000
3.000
12.000
22.000
10.000
40.000
2.500
5.000
2.500
18.000
2.000
15.000
35.000
22.000
Special Ward- 24
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
Bed Side Locker
IV Stand
Wooden Chair Flat Arm
Wooden Stool
Easy Chair
Cardiac Table
Bed Pan
Wall Clock
Wooden Chair
AC Window
Desert Cooler
Weight Machine
Cooler pump
Laryngoscope with three blade
Electrical Destroyer Needle
Oxygen Flow Meter
BP Apparatus
2029
2030
2031
2032
2033
Histoknate Machine Complete
Automatic Knife Sharpners spencer
Microtome
Cryostate Bright open top model
microscope Nikon Multi Teaching head, pentahead Tricocular
research microscope Model Optiphot
Photographic equipment Nikon Japan Make Micro and Macro Model
Multiphot
Imaging System complete crown trinocular microscope & other
accessories
Deep Freezer make AICIL
Binocular Research Microscope Model BPM-3
Microscope Monocular
Microscope Olympus Monocular
Microscope Monocular
Microscope Olympus Monocular
Microscope Monocular
Microscope Monocular
Microscope Olympus Monocular
Microscope Olympus Monocular
Microscope Olympus Monocular
Microscope Monocular
Microscope Binocular olympus
Microscope Binocular
Cabinet for 100 slides
Voltage Stabilizer Seko
Hot Plate
Desert Cooler
Ceiling Fans 56” with Regulator
Pathology Deptt
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
95
Clinical Pathology
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
Air Conditioner (Shifted from Rest house) old
Steel Table Godrej
Micro rtefac (200 micro ltr)
Chair Godrej
Iron Rack
Desert Cooler without motor (5 nos.) one with motor
Wooden Chairs
Water bath (12’x8x’6’)
Centrifuge Machien (Remi)
Waist Drum platic
CVT Dheeji 2 KV
Plastic Choki
Water Cooler
Almirah small
Almirah big
Ajay Make Microscope
Torch, 2 cell Capacity
Filter Holder Membrain Whatman
1
6
2
5
1
6
1
3
4
1
1
2
1
1
2
3
1
1
60.000
35.000
0.300
8.000
9.000
30.000
5.000
5.000
20.000
7.000
50.000
2.000
45.000
30.000
50.000
12.000
0.150
0.500
2
3
5
4
1
2
3
80.000
90.000
400.000
400.000
20.000
5.000
5.000
6
4
3
1
1
1
1
2
1
1
2
5
15
1
1
1
1
1
1
2
3
2
1
1
3
1
40.000
60.000
4.000
3.000
12.000
40.000
30.000
1.500
4.000
1.000
35.000
200.000
45.000
5.000
1.000
35.000
10.000
3.000
5.000
5.000
1.000
1.000
0.500
2.000
0.100
0.300
Ward-26
2073
2074
2075
2076
2077
2078
2079
Pt. Cycle Wheel Trolley
Wooden Table
Iron Folding bed
Iron Spring Bed
Wheel Chair
Bed Pen
Urinal
Ward-19 (BPS)
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
Iron Bed
Flower Bed
Iron Stool
Back Rest
Dressing Trolley
Pt. Trolley Cycle Wheel
Wheel Chair
Oxygen Flow Meter
Tea Earn
Needle Cutter
Air Conditioner
Desert Cooler
Ceiling Fan
Electric needle Syringe Destroyer
Hot Plate
Wheel Barrow
Pt. Trolley small wheel
Iron Stool
Cycle Air pump
Godrej Type Chair
SS dRum Large
SS dRum Small
BP Apparatus
Chapati Box
Iron Locks
Scissors
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
96
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
Electric Stabilizer
Straight Scissors
Neeldle Holder
Tooth Disecting Forceps
Knife handle
Needle Holder
Artery Forceps
Fine Scissors
Skin Hook
½ Teeth Fixation Forceps
Water Cooler
2117
2118
2119
2120
2121
2122
2123
2124
Breakfast Trolley
Four Locker Almirah
Revolving Stool
Hot plate
Hot Case
BP Apparatus
Tailor Scissors
IV stand
2
1
1
2
3
3
11
8
8
2
1
4.000
0.040
0.020
0.250
0.250
0.015
0.015
0.015
0.015
0.040
70.000
1
2
1
2
1
1
1
1
50.000
60.000
10.000
5.000
2.000
0.500
0.300
4.000
3
1
2
1
1
4
4
2
1
4
6
1
1
1
10
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
12
2
5
4
1.200
0.400
0.600
2.200
2.800
1.200
1.400
1.000
0.150
1.200
0.240
0.080
0.080
0.080
7.000
0.300
0.250
0.600
0.250
0.200
0.150
0.200
0.080
0.250
0.100
0.300
0.200
0.150
0.150
0.080
0.240
0.040
0.100
0.020
Urology Deptt. Ward-18
Central Workshop
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
Allen key set
Adjustable Wrench 10”
Adjustable Wrench 6”
LOV more
LOV more
Choppen
Dhari
Thapa
Kathi (TinCutter)
Plier 8”
Line Tester
Meter MA 30
Meter MA 10
Meter MA 2.5
Clamp Crocodile
File Half Round 12”
File Half Round 6”
Hammer ¾
Hand Saw Big
Hand Saw 14” with handle
Hand Saw
Hand Saw 16” /17”
Electric Tester
Chorsi
Chorsi 3/8”
Blow Lamp
Blow Lamp hand operated
Jammor
Berma(Contntry drill)
Cutter
Triangular File
Triangular File
Triangular File
Triangular File
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
97
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
Chisels 3”
Chisels 8”
Chisels 8”
Gas Cylinder F-12
Spanner Oj
Digital Clamp meter
Top set 5/16
Screen Welding
Drill 11/64”
Finit Pump
Water Pump Player
Tips Welding
Die Set
Empty tin 20 ltr
Engraving Mac
Erka Tester
File Flate 12”
File Flate 12”
Round File 3/8
Round File 3/8
File Smooth 6”
Firmer Chisel
Firmers Gauze
Screw Driver 939 & 929
Screw Driver 913 & 935
Screw Driver 913 & 35
Aliner
Chmiti
Girmet ¾”
Girmet 5/8”
Nipple Key
Gulshan Glass Cutter
Gas Welding set
Welding set Gulli
Welding set ½ LB
Goggle
Welding Screeen with glass
Hamm Small
Welding Holder
Hammer
Haxa Frame 12”
Electric Welding Holder
Hammer Rubber
Drill Bit 3/22”
Hand Gloves
Iron Cutter
Drill Bit 5/22”
Lathe Tool 12”
lathe Tool 10”
Tool Bag
Magnet
Mortic Chisel ½
Mortic Chisel 1 ½
Mortic Gauge
Needle File
Nozzle Air
Oil Stone
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
2
2
2
2
1
1
2
5
1
1
2
1
6
1
1
1
1
1
1
1
4
2
3
2
2
1
1
1
1
1
3
1
1
1
1
1
3
2
1
2
1
1
3
5
1
2
4
2
5
1
1
1
2
3
1
3
0.100
0.500
0.500
14.000
0.080
0.700
0.150
0.400
0.050
0.100
0.200
0.200
0.050
3.000
0.100
0.100
0.060
0.060
0.080
0.030
0.050
0.200
0.100
0.150
0.060
0.060
0.030
0.030
0.100
0.100
0.020
0.120
0.200
0.200
0.600
0.080
0.100
0.300
0.100
2.800
0.300
0.100
0.100
0.010
0.080
0.200
0.010
4.000
3.000
0.200
0.100
0.100
0.150
0.100
0.020
0.030
0.100
98
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
Plan Balde
Player long no. 6
Pipe Wrinch 14”
Jack Plan with Tage
Randa
Plan Rabit big with blade wooden
Plain Molding with blade
Harrison Lock
Digital Multimeter
Jack wooden plan
Patmi Wooden Randa
Plan Wooden with Blade
Planer Blade
Plane Grooving
Teg 1 ¾
Teg 2
Plaiin Smoothing 9” Double Blade
Plncer Jummer
Pocker
Pich Gauge
Pich Screw
S-Tool (Sweding Tool)
Set Connection
Spanner set
Spanner set ring 12 pcs
Spanner set ring magneto set
Screw wriench 10”
Screw wriench 24”
Side Cutter
Scraper flate
Screw Driver pye 5”
Screw Drive 516
Screw Driver 510
Screw Driver double 786
Screw Driver 6”
Screw Driver 7”
Screw Driver 8”
Screw Driver 12”
Screw Driver 2”
Square Tailan Wooden 2”
Spoke Save
Screw Driver london
Sunmick cutter
Spanner OZDE 6x7=20x20M 8 pcs
Drill Bit 3/16”
Drill Bit 1/8”
Spanner OZDE 20x22mm
Sikkanja for Joinsaw
Tap/Die ½” set
Tap/Die ¼” set
Terwal(Karni)
Try Square
Tape Handle ¼”
Drill Bit ¼”
Talwar
Variac 15amp
Volt Meter DC 0-10 V
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
5
2
2
1
1
1
2
2
1
1
4
2
1
2
1
2
1
1
1
1
1
2
1
2
1
1
1
3
1
2
1
1
1
2
1
1
2
1
1
1
1
1
1
18
8
1
1
1
1
2
1
1
4
2
1
4
0.050
0.050
1.000
0.200
0.250
0.200
0.300
0.150
0.050
0.300
0.350
0.400
0.120
0.350
0.100
0.050
0.600
0.200
0.150
0.100
0.100
0.100
0.200
1.000
2.000
0.800
0.200
1.000
0.150
0.100
0.120
0.040
0.030
0.040
0.100
0.060
0.065
0.160
0.020
0.040
0.200
0.200
8.000
0.400
0.180
0.080
0.060
0.500
0.150
0.200
0.200
0.050
0.100
0.040
2.000
10.000
0.160
99
2273
2274
2275
Volt Meter DC 0-5 V
Volt meter AC /DC 0-50 V
Drill Bit 9/64”
4
6
10
0.160
0.240
0.100
3
8
1
2
1
1
1
2
1
10
1
1
11
1
1
1
1
1
2
4
1
2
1
7
1
2
1
1
1
2
7
3
1
1
1
4
15
1
2
5
3
5
2
3
2
4
1
3
4
4
1
1
6.000
120.000
0.100
1.000
2.000
5.000
1.000
1.000
1.000
30.000
3.000
7.000
0.020
1.000
1.000
2.000
0.300
10.000
0.200
10.000
20.000
0.400
3.000
0.700
0.050
2.000
10.000
6.000
5.000
4.000
2.000
0.150
0.250
0.250
0.050
16.000
37.500
0.020
3.000
0.250
1.500
0.500
0.500
0.300
4.000
2.000
20.000
0.500
0.800
16.000
4.000
10.000
Medicine –V (Ward-9)
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
Exhast Fan
Iron bed
Prectoscope
Patromax Lamp
Dust in with paddle
Revlving Chair
Double Demonstration eye piece
Aluminium Bucket
Microscope
Iron Stool
Weighing machine
Dressing Trolley
Test Tube Holder
Cycle Cir pump
Sauce Pan
Hot Plate
Point Measures
Gastroscope Hanger
Laringo scope
Desert Cooler
File Cabinet 4 draj
Enema Cane
Slide Projector
Slide Box
Sessior Covered
Nebulizer
iron Steel Rack
Wooden Table
Wheel Barrow
Basin Stand
IV Stand
Oxygen Flow Meter
Electric Cutter
Hand Syringe Cutter
Chital Forceps
Godrej Chair
Ceiling Fan
Tooth Dissecting for ceps
Dressing Drum SS Small
Spirit lamp
Ultra violet lamp
EI Feeding Cup
EI Basin
EI Sputum cup
Dressing Drum big
Desert Cooler pump
Air Conditioner
BP Apparatus
Ambu
Back Rest
Centifuge Machine
Examination Couch for Table
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
100
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
Suction Mahcine
Tailoring Scissor
Bed Side Locker
Outlet Oxygen Flow Meter
Iron Chain
Rack letter Godrej
Oxygen Flow Meter
Oxygen Key
Funnel Tube Plastic
Chittal Forceps
Analytic Balance
X Ray View box
BP Apparatus
Oxygen Stand
2
1
10
4
2
2
3
2
1
2
1
1
7
4
5.000
0.200
40.000
4.000
4.000
6.000
1.500
0.200
0.050
0.020
4.000
3.000
7.000
4.000
1
2
2
2
1
12
20.000
4.000
1.500
3.000
35.000
3.000
2
8
2
1
2
2
10
2
1
2
6.000
30.000
40.000
50.000
8.000
18.000
3.000
5.000
25.000
30.000
38
5
5
1
1
1
3
1
1
5
1
4
5
5
10
5
2
3
10
4
6
7
190.000
100.000
20.000
1.000
5.000
30.000
0.500
150.000
1.000
0.400
4.000
1.500
5.000
4.000
10.000
60.000
0.500
5.000
5.000
5.000
15.000
4.000
LROT
2342
2343
2344
2345
2346
2347
Suction Machine
Needle Cutter
halogen heater
SS Steel drum Small size
Wheel Broonzo
EI Kidney Tray
College of Pharmacy
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
Chair Wooden with arm
Student Chair Wooden
Office Table Steel
Office Table Wooden
Steel Chair Without arm
Office Steel Chair With arm
Test tube stand
Water Bath Electrically
Water Distillation Steel
Desert Cooler
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
Fan
Desert Cooler
Exhaust Fan
Hot Plate
Suction Machine
Air Conditioner
Needle Cutter
Oven
Nebulizer
Oxygen Flow Meter
Posion Cup board
Halogen heater
Oxygen Stand
IV Stand
Bed side locker
Almirah Big
BP Apparatus
Cardiac Table
Iron Stool
Office Chair
Screen
Office Paper tray
W.No. 14/II & III
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
101
2380
2381
2382
2383
2384
2385
2386
2387
Oxygen Trolley
Spring Bed
EI Tray
Dustin
Vaccine Carrior
Black Board Stand
Suction Bottle
Oyxgen Flow Meter outlet
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
X-ray view box
Cadaver Injector
Refrigerator Allayan
Fan 56”
Desert Cooler
Microscope Germen
Blower Heater
Air Conditioner
Incubator mamert
Automatic Knife sharpner
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
EI Bowl
EI Jari with lid
EI Feeding cup
EI Basin 20cm
EI Pint Measures
Tea URM SS
Wheel Barrow
Microscope Research Binocular Olympus
Flow Meter
Sterling box with inset Syringes
Table Godrej
Table Wooden small
Chair Wooden
Wooden Chair with Arm rest
Chair Godrej
Chair Folding Iron
Black Board
Bed Iron
Bed side locker
Oridinary Lock
Comedo Extractor
Refirgerator
Desert Cooler
Ceiling Fan
Old Ceiling fan
BP Handle
Currette
Spatula
Fascial Sona
EI Basin
Electro Surgical unit
Needle Cutter
Wooden Stool
Dermascope Table Model
Intophoresis Silico Metracess
1
2
3
2
1
3
5
10
50.000
60.000
0.500
4.000
2.000
15.000
3.000
0.500
1
1
1
22
10
20
1
3
1
1
4.000
16.000
35.000
132.000
160.000
3.000
3.000
105.000
4.000
40.000
2
2
4
7
5
1
1
1
1
5
1
1
1
6
4
16
1
3
2
1
6
1
1
3
13
1
1
1
1
1
2
1
1
1
1
0.100
1.000
0.100
0.200
0.300
4.000
10.000
5.000
0.500
0.150
20.000
5.000
5.000
5.000
5.000
5.000
3.000
20.000
7.000
0.100
0.020
60.000
30.000
15.000
65.000
0.050
0.050
0.050
0.500
0.500
1.000
0.500
5.000
5.000
2.000
Anatomy
Skin & VD Deptt. (Ward)
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
102
2433
2434
2435
2436
Dermabrader with Brushes
Wood’s Lamp Hand Model
Over Head Projector
Haemoglobinometer
1
1
1
2
2.000
0.500
15.000
0.250
Obst & Gynae Deptt (Labour Room)
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
Chittal Forceps
EB Currete
Dilater Set
Valleslum
Currete Forceps
Sponge Holder
Scissor St. 8” Long
Mayoscissar
Colline Canula
Knife Holder forceps
Cusco Speculum
Tooth Forceps
Cocker Clamp
Arteroi Forceps
Simus Speculum
Needle Holder
Vaccum cup silicon made
5
2
1
2
2
15
20
11
5
2
20
21
23
26
15
20
5
0.500
0.100
0.500
0.100
0.100
0.800
0.900
0.900
0.500
0.100
3.000
0.900
1.000
2.000
2.000
1.000
0.500
4
2
4
2
8
1
5
2
1
1
4
3
1
1
3
1
4
6
1
2
7
3
3
1
2
8
1
1
8
1
2
5
5.000
1.000
0.300
2.000
0.300
0.500
1.000
2.000
0.500
0.500
2.000
0.050
3.000
20.000
3.000
0.300
0.150
1.000
20.000
2.000
0.500
3.000
3.000
10.000
20.000
2.000
5.000
20.000
10.000
2.000
15.000
0.500
Labour Room
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
Trolley for Double Battery
Dressing Drum small size
Larangoscope small
Oxygen Cylinder Stand
Flow Meter
Wrench
Plastic Chair
Basin Stand for two basin
Doll & Dummy
Pelvic with foetal skull
Hospital steel chair
Oxygen Key
Stand for two Drum
Diwan
Revolving Stool
Ambu bag big
ambu bag small
BP Apparatus
Bench
Dressing Drum big size
Basin large size
Foot Step
IV Stand
PT trolley (cycle wheel)
Wheel Barrow
SS Tray big
Stand for three drum
Air Conditioner
Battery
Halogen heater
Suction Machine
Electrical Needle Cutter
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
103
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
Hot Plate
Mobile light
Inverter
Water cooler
High Pressure
Ultrasound Machine
Foetal Monitor with trolley
Kushion Chair
Wooden Chair
Godrej Chair
Iron Beds
Enemal Bucket
2498
2499
2500
Accessories of Eschemann Operation Table
Head light sources
Valley Lab diathermy with foot switch
2501
2502
2503
2504
2505
2506
2507
2508
2511
2512
2513
Microscope Monocular make olympus
Iron Washing tub with stand
Inspissator
Top Pan Balance
Desert Cooler
Micropipette 50-300ml, 10x100ml, 100x1000ml, 20x200ml
Locks
Split AC 1.5 ton with cordless remote control out door unit & indoor
unit with 2 angle stand inron with automatic voltage stabilizer cap 4
KVA
Refrigerator make godrej cap 275 ltr and 300 ltr
Hot Air Oven 300x300x300mm inner Chamber SS with Air
Circulator Fan Thermostate with temp 50 C to 80C
Office Steel Chair
Wooden Stool
SS Almirah
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
GI Trunk 2.5x1.5x22 G
GI Trunk 4x2.5x2’ 22 G
Room Heater
Stabilizer
Hot plate
Ketle
Telephone
Gas Regulator
Calculator
Chair Visotor Capsule Val vet cloth
Chair Alwyn
AC
Desert Cooler
PVC Plastic Pipe ½
Cycle
Fans
Wooden Bench
Wheel Barrow
PVC Chair Set of 4
Patient Trolley
Tray for tea pot
1
6
4
1
1
1
1
5
5
1
7
2
1.000
12.000
10.000
40.000
100.000
15.000
10.000
4.000
3.000
4.000
140.000
2.000
1
1
1
50.000
10.000
15.000
15
1
1
1
3
7
4
1
30.000
5.000
5.000
4.000
40.000
0.300
0.200
20.000
3
1
20.000
15.000
8
10
2
20.000
30.000
30.000
Neurosurgery Deptt.
Microbiology Deptt.
2509
2510
MS Office Indoor Gallery and Sanitation Store Articles
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
1
1
1
2
2
2
2
1
1
1
1
2
300
1
14
1
2
2
41
2
25.000
35.000
1.000
1.500
2.000
1.000
1.500
0.500
0.300
10.000
5.000
50.000
30.000
6.000
20.000
112.000
30.000
35.000
25.000
800.000
3.000
104
2535
2536
2537
2538
Wheel chair Small
Wall Clock
Steel Chair
Water cooler
62
5
6
3
620.000
2.000
18.000
180.000
12
50
1
36.000
150.000
30.000
1
1
1
1
1
1
1
1
2
4
1
0.010
0.250
0.250
0.150
25.000
0.050
0.010
60.000
0.250
0.200
30.000
1
2
3
10
4
1
1
1
1
2
2
3
1
1
1
1
1
1
2
2
2
1
1
2
1
4
2
4
1
1
5
6
20.000
30.000
3.000
0.500
2.000
5.000
5.000
5.000
0.050
1.000
0.500
0.100
20.000
5.000
0.500
0.500
0.500
0.100
5.000
3.000
1.000
10.000
2.000
40.000
2.000
40.000
0.500
0.500
10.000
90.000
300.000
20.000
Vishram Sadan
2539
2540
2541
Fan Khetan 56”
Fan Khetan 56”
Water Cooler with stabilizer
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
EPROM (Part of Zerox Machine Photocopier
Drum Blade
By Pass Tray
L & M Senser Assembly
Monitor & Keyboard of Computer
Hot Roller
Hot Roller Striper
Photostate Machine Richo
Wall Clock
Lock
HP Laser Jet Printer
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
Wooden Table Big
Wooden Bench
Dustbin Iron
Locks Various Size
BP Apparatus
Nurses Chair
Iron Stool
Weighing Machine
EI Bowl
Wall Clock
BP Light
Sprit Lamp
Wheel Barrow
Halogen Heater
Blower
EI Medium Tray
EI Large Tray
EI Big Bowl
SS Dressing Drum Medium
EI Jar big with cover
Oxygen Flow Meter
Microscope
EI Bucket
Patient Trolley
Curved Instrument Trolley
Wheel Chair
Urinal
Bed Pen
Suction Machine
Water Cooler
Air Conditioner
Ceilling Fan
Forensic Medicine
Radiotherapy Deptt. (OPD)
Radiotherapy Deptt.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
105
2585
2586
2587
2588
2589
2590
2591
2592
2593
Battries (Used 10 KVA UPS for Th-780E machine)
Mantle Cutting Apparatus/ Machine
Head Light Mirror
Cus cus speculum
Sims Speculum
Chetal Forceps
Sponge Holder Forceps
Laryngoscope Mirror with handle
Fletcher Williamson applicator set
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
BP Apparatus
Needle Cutter
Electrical Sterlizer
Hot plate
Flow Meter
Wheel Chair
Godrej Chair
Cooler Motor
Cooler Pump
Water Cooler
A.C.
Suction Machine
Patient Trolley
Filling Cabinet
Exhaust Fan
Hot Case
Office Dustbin
Dressing Drum
Ambu Bag
Ceiling Fan
Wheel Barrow
Steel Book Shalf
SS Bucket
O2 Pipe Wrench
Oxygen Stand
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
Examination Angle Light Lamp
Table Lamp
Studio Light
Bucket EI
Finit Pump
Dressing Drum Big size
Dressing Drum Medium size
EI Basin big size
Glass Steel
Jug Steel
Scissor big size tailoring
Emergency torch
Flow Meter oxygen cylinder
Needle Cutter
BP Apparatus
MVA Syringe + Kit
Bucket Plastic large
Vallsellum forceps
Artery Forceps
20
1
1
2
1
1
1
14
1
300.000
20.000
0.200
0.750
0.500
0.050
0.050
0.020
0.500
2
2
1
1
2
2
3
1
1
1
2
1
2
1
3
1
1
1
2
2
1
1
2
1
1
6.000
3.000
6.000
2.000
1.000
40.000
15.000
2.000
1.500
90.000
85.000
20.000
40.000
80.000
15.000
2.500
3.000
2.000
1.000
20.000
25.000
50.000
2.000
0.200
1.000
2
1
1
2
2
4
2
4
1
1
1
1
1
3
1
1
3
1
1
2.000
1.000
1.000
2.000
0.200
3.000
1.000
2.000
0.200
0.500
0.500
2.000
0.500
9.000
1.000
0.150
1.500
0.100
0.100
Ward-23
Post Partem Centre
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
106
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
Suture Cutting Scissor
Cusco Speclum
Chair without arms (Folding)
Ceiling Fan 56”
IV Stand
Wheel Chair
Examination Table
Stool Iron
EI/ Locker
Basin Stand
Almirah Glass door
Bucket Plastic large
Projector Stand
EB Currette
Bed Iron
2
10
14
5
1
1
1
1
1
1
1
2
1
1
1
0.100
1.500
56.000
25.000
3.000
10.000
20.000
2.000
5.000
5.000
70.000
1.000
10.000
0.010
15.000
12
1
72.000
30.000
1
1
1
1
12
8
1
1
5
5
8
4
5
4
1
2
2
2
2
1
2
2
2
14
4
3
50.000
50.000
40.000
44.000
36.000
40.000
5.000
1.000
80.000
70.000
56.000
104.000
60.000
12.000
28.000
56.000
0.200
8.000
0.500
0.100
40.000
0.100
20.000
196.000
72.000
45.000
Pediatric OPD
2653
2654
Ceiling Fans
Desert Cooler
2655
2657
2658
2660
2661
2663
2664
2666
2667
2669
2670
2672
2673
2675
2676
2678
2679
2681
2682
2684
2685
2687
2688
2690
2691
2693
Photocopier (1025) Modi Xerox
Photocopier (5216) Modi Xerox
Air Conditioner (Jain Sons)
Air Conditioner (Accair Electrronics)
Chair Tubular
Chair Wooden Arms with
Lecture Stand
Waste Paper Basket
Electrical Fan Pedastrial
Revolving Chair
Examination Chair with Cushion
Table Teek Wood
Examination Table
Ceiling Fan
Table Godrej tobular win
Table Godrej Win
Lock Godrej
Printer Wipro LQDS
Multi Teach Modem System
Hub 8 Port make surelow
Computer Table
Spike Supressor
Examination Table
Old Ceiling fan
Voltage Stabilizer 5 KVA
Voltage Stabilizer 3 KVA
2694
2695
2696
2697
2698
2699
2700
2701
EI Tray Small
EI Tray Large
EI Knife Tray
EI Basin
EI Feeding Cup
BP Apparatus
Bed side locker
Back Rest
Library Deptt
Deptt. of Chest & TB (Ward-17)
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
3
1
1
5
7
3
4
2
0.800
1.000
0.500
2.000
0.800
3.000
20.000
10.000
107
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
Food Troley SS
Iron Chair Folding
Oxygen Flow Meter
Iron Hard Bed
I/V Stand
Oxygen Key
Patient Trolley Iron small Wheel
Pipe Wrench
Wheel Barrow
Weighing Machine
Tailor Scissors
Wooden Bench
Suction Machine
Desert Cooler
Electric Cutter
Hallogen Heater
Ceiling Fan 56”
Water Cooler with stabilizer
Ext. Fans
Ext. Fans(fresh air)
X-ray view box
Voltgae Stabilizer
Coops Biopsy Needle
Dressing Drum medium size SS
Dressing Drum SS small
Instrument tray SS
Laryngoscope with blade
1
15
4
4
4
1
2
1
1
2
1
2
2
9
5
1
28
2
4
1
2
4
6
1
2
1
1
20.000
45.000
2.000
120.000
2.000
0.100
40.000
0.250
10.000
4.000
0.250
10.000
30.000
90.000
5.000
1.000
56.000
240.000
8.000
1.000
10.000
20.000
0.100
2.000
1.500
0.250
0.200
2
1
2
13
2
1
1
24
1
1
1
1
1
27
1
6
1
1
1
1
1
2
3
3
2
1
1
5
2.500
1.000
2.000
39.000
4.000
0.005
4.000
72.000
1.000
2.000
0.500
0.500
0.150
13.000
0.500
0.100
0.200
0.700
30.000
10.000
0.020
0.020
0.002
1.000
0.200
0.005
5.000
8.000
College of Nursing
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
Baby Bed Cradle detachable
Bath Tub zink
Black board wooden wth stand
Folding chair (Iron)
Hot Plate
Mini Calculator
Notice Board
Office Chair (Godrej)
Stove Burner
Stool SS (Revolving)
Tape Recorder
Table Lamp Angle point
Thermometer Stand
Chair Wooden for class room
Emergency light
Locks
Room heater
Revolving Chair
Refrigerator
Over Head Projector
Scalpal SS
urinal Male
Bulb for OHP
Chain Iron (for cooler)
Mug EI
Projection Screen
Stabilizer
Table Small
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
108
2757
2758
2759
2760
Wooden table
Water cooler
Writing Table
Desert Cooler
7
1
5
3
5.000
30.000
8.000
35.000
8
2
2
2
8
1
72
70
25
25
32
5
2
22
25
40
33
15
13
2
50
50
3.500
12.000
3.000
10.000
15.000
48.000
288.000
350.000
75.000
50.000
150.000
35.000
25.000
40.000
20.000
160.000
165.000
60.000
390.000
80.000
200.000
500.000
45
10
10
1
1
1
5
1
6
1
1
20
25
15
1
58
62
1
1
15
125
35
5
30
80
5
6
1800.000
15.000
50.000
2.000
35.000
20.000
50.000
1.000
36.000
2.000
30.000
200.000
50.000
30.000
1.000
116.000
124.000
0.500
20.000
2.000
6.000
6.200
0.750
10.000
0.500
2.000
1.380
Boys Hostel
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
Carrom chair Iron
Carrom Table
Carrom Board
Television
News paper stand
TT Table
Steel Chair Without arm
Steel Chair With arm
Iron Chair Tubular
Wooden Table
Iron Table sunmica top
Niwar Cot
Dining Table
Steel Hard Bed big
Hard Bed ply
Steel Chair Sq. Pipe
Examination Chair
Steel Chair with canning
Desert Cooler
Refrigerator
Ceiling Fan 48”
Ceiling Fan 56”
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
Hard Bed Steel
Dining Table with sunmica
Iron Pipe Bed
Carrom Board
Garden Bench Iron
Garden Bench Wooden
Easy Chair Wooden
Paper Tray Godrej
Revolving Stool
Notice Board
Sewing M/c Usha with handle & cover
Office Steel Table 3 drawers
Chair Steel Canning
Wooden Stool
Directory Board
Office Steel Chair with arm
Dining Chair Steel
Radio Philips 4 band 15 RB
TV Western CTV 51 cm
Bhojan Thal
Bhojan Thal
Glass Stainless Steel
Karchi Steel
Full Plate Stainless Steel
Tea Spoon Stainless Steel
Serice Spoon
Donga Stainless steel
Girls Hostel
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
109
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
Tea Pot Stainless steel
Palta Stainless Steel
Begona with lid Stainless steel
Water Cooler (Gulrnaag)
Water Cooler
Desert Cooler
TV Videocon
Ceiling Fans
Safe Set with 2 chair
Chairs caining with arms
TT Table
Table one drawer
Finit Pump
Finit Pump
Finit Pump
Locks
Locks
Notice Board
Torch
Bucket
Talwar
Khurpa
Kassi
Kassi
Watering pipe
Essy chair Wooden
Folding Bed
2
3
3
1
2
5
1
65
1
15
1
9
1
2
5
20
15
2
1
1
2
2
2
1
100 mtr
5
7
0.500
0.500
8.415
40.000
40.000
20.000
10.000
310.000
50.000
5.000
12.000
20.000
0.200
0.400
1.000
2.000
1.500
10.000
0.200
2.000
2.000
0.500
2.000
2.000
30.000
5.000
150.000
1
3
1
1
2
1
1
2
1
1
400.000
150.000
600.000
5.000
0.300
3.000
2.000
3.000
1.000
40.000
8
1
1
1
1
1
1
1
1
5
2
2
2
3
2
10
50.000
20.000
50.000
10.000
15.000
1.000
2.000
1.000
Laundry Deptt
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
Washing Machine
Hydro Exractor
Calendring Machine
Chowki Wooden
Lock Harison
Wooden Table
Zinc Bucket
Plastic Bucket
Cycle Pump
Desert Cooler
SPM Deptt.
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
Chair Wooden Student
Stool Iron
Time Interval
Water Sterilizer (Distilled water)
Operation Trolley
Balance Weight set
Rotator
Transformer for Rotator
Spectroscope
Basin Evaporating, 100mm
Funnel 60ml
Stop Watch Swiss made
Nursing Table Hospital
Trunk 4’x2.5x2x22 G
Stool
Steel Chair folding
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
0.250
0.150
0.150
30.000
12.000
5.000
40.000
110
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
Dining Chair steel
Microscope Mono-ocular straight
Vaccine Carrier
Thermocol hotline
Day Carrier
Folding Chair
Revolving Stool
Adult Weighing Machine
Torch 2 cell plastic body
Desert cooler without moter pump
Stethoscope
Ceiling Fans 56”
AC
Steel Rack Small
File Cabinet Iron
Student Table Wooden
Cash Box locker
IV Stand
Glass
Wooden Bench
Computer Set, Monitor CPU Key board
Hurricane lamp
Petromax
Board Wooden 8x10’
Screw Driver
Screw Driver
Drill Machine
Sheet 9x4”
Frame Hexa
Aari Blade
KV Generator Set
Mike Stand ATS
Towel Stand
Lactometer
Small Bowl EI 4”
Bowl EI 24cm
BP Apparatus
Desert Cooler
Funnel EI
Paper Cutter
China Plate for mixing color
Photo Album
Reels Camera film
Knife kitchen party
Photogrpahic film Real 35mm
Nozzle for Enema Syringe
File Round
Nirbhay Stove
Lids for Degchi patila
Instrument Box
Desert Spoon
Chock 20 wt
GI weight
Empty can plastic
Jar with cover 10x10cm on EI
ICE beg 20cm
Basin EI 36cm
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
8
1
26
9
2
20
2
11
7
5
10
15
1
1
2
2
1
3
6
2
1
2
25
6
3
1
2
4
1
1
1
2
6
1
5
2
15
2
1
1
9
3
5
4
31
10
10
1
4
1
10
51
1
5
2
3
4
25.000
3.000
1.000
7.000
1.000
65.000
10.000
10.000
0.600
60.000
0.750
120.000
60.000
15.000
4.000
20.000
25.000
20.000
0.200
20.000
20.000
1.000
20.000
3.000
0.050
0.025
1.500
0.600
0.500
0.300
58.000
3.000
40.000
0.050
0.250
0.250
5.000
30.000
0.050
3.000
0.500
1.500
0.050
0.200
0.300
0.050
1.000
2.000
20.000
0.500
0.250
12.000
1.250
1.250
0.200
0.500
2.000
111
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
Kidney Tray EI
Bowl EI 24cm
Sauce Pan
Saw
H.O. Garden Junior
Iron table Folding
Iron Folding Bed
Empty Drum
Earth Auger
Swimming Chair
GI Steel Trunk 2.5”x17”x11” 22G
HB Meter
Stop Watch Swiss made
Bowel EI 20cm
Quarter Plates Plastic
Donga Ss
Fork
Basin SS
Pot Cooking sauce pan Ss
Balance Weight Analytical
Measuring Graduation 500ml
Greater Shredder Semi Circle SS
Knife Kitchen Utility 6 ¾
Knife Parry
Tawa
Chilamchi Big siz EI
18
17
4
2
1
47
1
17
2
18
1
2
1
4
14
1
3
1
4
1
2
2
2
2
2
4
3.000
7.000
2.500
0.250
0.300
10.000
5.000
20.000
3.000
3.000
10.000
0.100
0.025
0.050
0.050
0.080
0.020
0.400
2.000
0.000
0.300
0.100
0.030
0.030
0.200
0.800
1
1
1
4
5
10
10
2
6
40
1
10
18
8
78
2
1
8
6
2
3
12
2
2
15.000
10.000
5.000
75.000
30.000
200.000
100.000
35.000
15.000
320.000
1.000
1.000
3.000
1.000
10.000
10.000
70.000
25.000
40.000
50.000
10.000
100.000
50.000
40.000
10
4
40.000
1.000
Doctor Hostel
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
Carrom Table
Television Stand
Radio Stand
Hard Bed Iron
Iron pipe bed
Godrej Table
Table sunmica top
Table Wooden
Chair Dinning
Iron Chair
Bhogna SS
Half Plate SS
Full Plate
Half Plate
Cup
Exhaust Fan 18”
Water cooler
Steel Hard bed Ply top
Iron Chair
Desert Cooler
Dustbin plastic
Wooden Chair
Sofa set 3 seater
Sofa Set 5 seater
Dental Deptt. (Dental Material)
2970
2971
Revolving Stool
Pad Locks (Indian)
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
112
Prosthodontics
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
Suction Apparatus
Control Box
Drum Packing
Kidney Tray
Cement Spatula
Fox Plate
Chetal Forceps
Crown & Bridge Remover
Scissors
Filing Instrument
Plugger
T Shape Burnisher
Tongue Depressor
Surgical Instruemnt Tray
Crown Scissor for Denture
Gray clip Towel
Impression Tray
Endentulous Tray
Wax Knife
Plaster Knife
Plaster Spatula
Ortho Wire Cutter
SS Bowl
Rubber Bowl
Mixing Spatula
Wax Carver
Stone Denotoform
Articulated D model 860 Stone Dental
Air Rotor Handpiece
Instrument Trolley Curved
Cryer Forceps
Steel Almirah
Needle Destroyer
1
3
2
5
15
2
2
2
2
4
4
4
2
4
25
12
160
325
1
36
4
1
1
1
1
1
1
1
5
1
2
4
1
3.000
0.750
0.080
0.025
0.025
0.050
0.035
0.100
0.050
0.025
0.005
2.000
1.000
2.000
1.000
1.000
2.000
3.000
3.000
1.000
2.000
1.000
5.000
1.000
120.000
0.500
Dental Office
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
Office Chair
Waste Paper Bucket
Office Steel Table
Office Steel Chair
Heater Single Rod
Steel Rack big size
Telephone Locks
Locks 7m
Photostate Machine 10x14”
Non Woolen Carpet 21.4 x 20 ¾
Foot mat 3’x12’
Heater Kettle
Bicycle
5
2
1
3
1
2
1
3
1
1
6
1
1
15.000
1.000
10.000
10.000
2.000
20.000
0.100
0.200
10.000
10.000
10.000
1.000
10.000
1
2
1
1
1
0.300
0.030
1.000
0.100
0.400
Prosthodontics Deptt.
3018
3019
3020
3021
3022
Model Holder
Rubber Adapter for Flexceal
Austenal Serveyar Complete
Chisel Tool
Pressure Regulator
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
113
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
Oil Lubricator
Air chisel with 3 tools
Crucible Former (1 pkt of 10 nos._
Oven for Refractory model
Weston Thermameter
Melt O Pot
Teel Immersion Pump
Vibrator (220V -50HZ)
Investing Ringh with Clips
Investing Ringh with Clips
SS Top for Vibrator
Transit Base
Measureing Flask 500CC
Clips 2-1/4”
Demco Grinder
Automatic Spindle
Rotomatic (240-50HZ)
Collect for Automatic Spindle
Belt for Demco Grinder
Merti Cliper Regular
Purox Welding out fit
Air Hammer
Carver
Wax Knife
Rubber Bowl
Plaster Knife
Plaster Sheer
Screw Driver
Plaster Spatula
Plies
Bross Handle Blow Pipe
metri Cliper
Stabilizer
Heater Arber
Centry Fugal Casting Machine
hanging Engine with cable arm and hand piece
Acrylizer
Iron Stand
Steel Almirah big
Office Steel Tray
Circular Jar
Wooden Chair
Iron Stand
Table With Iron leg
Iron Hammer
Dental Flask with clamp
Dental Flask with clamp
Hinz Articulator
Cable Arm
1
1
1
1
1
1
1
1
1
2
1
10
1
3
2
1
2
8
4
3
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
2
3
6
2
0.200
0.500
0.050
5.000
0.010
1.000
1.000
2.000
0.400
0.500
1.000
0.100
0.200
0.300
10.000
0.500
4.000
0.050
0.030
0.060
0.050
0.500
0.030
0.050
0.030
0.040
0.050
0.030
0.050
0.040
0.050
0.030
5.000
0.500
4.000
3.000
10.000
10.000
12.000
0.500
0.150
5.000
7.000
20.000
0.500
1.000
3.000
0.600
0.400
1
2
10
2
4
1
50.000
10.000
10.000
50.000
50.000
20.000
Prosthodontics
3072
3073
3074
3075
3076
3077
Doctor Almirah Size 1980x960x530mm
Office Table
Office Tubular Chair
Wooden Bench
Lab Table
Table Sunmica top
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
114
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
Brass Lock
Aluminium Pan Big size
Hammer with Hanlde
Name Plate
Name Plate Wooden
Brass Lock (Harison)
Brass Lock Harison
Doctors table 1500x900x750mm
Edentulous Tray Aluminium
Iron Bucket
Steel Stool Square
Mellet Metal
Table 1370x760x750mm
Automatic voltage Stabilizer
Votage Stabilizer Servo -1
SS Jug
Iron Screem Frame With Cover
Steel Rack
Steel Rack Small 30x30x13mm
Notice Board
Computer Chair with arm
Pre-Operative Table
Aluminium Pan with lid
Lab Table Fitted on steel pipe size 9x2x2 ¾’
Lab Table 9x3x3/4x2 ¾
Prosthetic Lab Table
Sapan Lock 8 lever
Steel Tabular chair
Notice Board
Small Table 1220x610x750
Godrej Table
Model Trimmer RPM 248001 Smith Make
Sraight Hand piece HW Austria
Hanging Engine Without Cable Arm
Electric Dental lathe Imported Heavy Duty
Dental Trolley Self Contained unit
Heavy Duty Press
Flask Press
Vibrators
Hydrulic Chair
Car Trolley
Acrylizer
Articulator
Coocking heater
Room Heater
Ceiling Fan
Exhaust Fan
Desert Cooler without motor & pump 3 nos.
3126
3127
3128
3129
3130
3131
3132
Artery Forceps
Health Stich cut scissor all
Needle Holder
Suction tip steel
Prob
St. Elevator
Wire Cutter SS
2
2
2
4
2
1
5
2
16
3
1
1
1
1
8
1
1
1
2
1
1
1
2
16
3
1
2
4
1
1
1
7
1
9
3
1
1
5
1
4
4
2
25
3
3
6
3
8
2.500
1.000
5.000
1.000
5.000
2.000
10.000
15.000
10.000
2.000
1.000
2.000
2.000
2.000
15.000
0.050
10.000
10.000
2.000
5.000
1.500
2.000
20.000
15.000
20.000
10.000
2.000
3.000
2.000
2.000
240.000
4
12
2
2
12
5
1
0.180
0.900
0.100
0.200
0.350
0.500
0.100
0.500
0.100
5.000
0.050
1.000
0.500
20.000
28.500
10.000
0.010
Oral & Maxifold (Dental Ward)
types
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
115
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
Flow Meter
Screw Driver
BP Handle
Bone Curret
Tissue Forceps
Aqua Water Puripfic
Elect. Needle Syringe Cutter
Torch 3 cell & 2 cell
Syringe Needle Cutter
Bed Pan
Micrometer Hand Piece
Office Chair
Wheel Barrow
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
Confident X-Ray Machine (Taxco make)
Cephalostat Msachine Japan make
Voltage Stabilizer
Room Heater
Emergency Light
X-Ray Illuminator
Table Office
Steel Tubular Chair
All purpose Orient Fan
Scisor Dressing
Brass Lock
Plair
Six Pin Hanger
Small pin Hanger
Voltage Stabilizer
Cheatabel Forceps
Probe Single Ended
Mirror
Tweeser
Dental Unit
Autoclave
Eletric Sterilizer (Large)
Electric Sterilizer (Small)
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
Voltage Stabilizer 0.5 KVA
Voltage Stabilizer 4 KVA
Card Trolley
Book Shelf
Angle Iron Stand
Light Cure Unit
Muttle Furnice
Air Control Box
Micromotor with Cantra Angle hand piece
Desert Cooler
Desert Cooler
Table Lamp
Fantam Jaw
PMT Set
Scissor
Plastic Mixing Spatula
Revolving Stool
Perio Steel Elevator
4
4
1
2
1
1
1
5
3
1
5
1
1
1.300
0.400
0.040
0.100
0.050
1.500
0.550
1.000
0.300
0.600
0.500
5.000
25.000
1
1
1
1
1
2
2
2
1
1
1
1
3
5
1
4
10
10
20
1
1
1
1
100.000
200.000
5.000
1.000
2.000
3.000
50.000
20.000
1.000
0.010
0.020
0.020
0.050
0.010
10.000
0.010
0.010
0.010
0.010
15.000
10.000
2.000
2.000
1
2
3
4
1
4
1
2
2
5
1
1
5
50
5
3
15
10
3.000
14.000
60.000
40.000
20.000
8.000
40.000
14.000
2.000
120.000
40.000
2.000
25.000
3.000
0.100
0.150
225.000
0.500
Oral Medicine
Operative Dentistry Dental
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
116
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
Probe
Instrument Sterilizer
Instrument Sterilizer
Portable Autoclave
Casting Machine
Suction Machine
Torch Cap
Plastic Tube
Room Heater
Gas Regulator
3197
Dental Chair
38
1
2
1
1
2
1
1
1
1
1.000
8.000
12.000
15.000
10.000
20.000
0.500
0.500
1.000
1.000
1
60.000
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
5
4
1
5.000
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
1.000
20.000
15.000
2.000
1.000
15
2
1
2
0.150
0.200
0.050
0.500
1
1
18
2
13
15.000
2.000
12.000
0.400
39.000
1
20
6
2
6
3
7
1
1
1
0.020
0.010
0.010
0.010
0.005
0.005
2.500
3.000
7.000
2.000
Dental Store
Oral Anatomy Dental
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
BPL 10,29,39,42,44,45, &54
BPL99
BPL-104
BPL-105
BPL-128
BPL-238
BPL-240
BPL-252
BPL-253
BPL-274
BPL-275
BPL-100
BPL-101
BPL-102
Slide Box Wooden
Revolving Stool
Revolving Stools
Waste Paper Basket Plastic
Room Heater
3217
3218
3219
3220
Mouth Mirror Handle
Lcoks
Periovestal Elevator
Torch Four cell
3221
3222
3223
3224
3225
Desert Cooler
Sterilizer (12x5x5”)
Color Photo Laminated 12x15”
Name Plate
Monocular Microscope
PCD Dental College
Oral Pathology
Periodontics Deptt.
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
Periosteal Elevator
Gracy Currete Hu Friedy
Posterior Sickle Hu Friedy
Chiesel Scaler
Ultrasonic Tip of Untrasonic scaler
Electro Surgical unit tip
Phenumatic Stool
Autoclave
Dental Unit
Dressing Trolley
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
117
3236
3237
3238
3239
3240
3241
3242
Ups 1 KVA offline system with battery
Halogen Stand
Ps. Booster Ultraosonic Scaler Comp.
P5 Booster Ultrasonic Scaler Comp
Cart Trolley
Cart Trolley
Control Box for Airoater
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
BP Handle
Stainless Steel Glass
Impression Tray
Desert Cooler
Steel Folding Chair
Locks
Bird Beak Pher
Heat Converter
Spog Welder
Hydraulic Dental Chair
Soldering Torch
Chairside Inst. Cabinet Wooden
Stand
Ligature Tukker
Model Trimmer
Lab Table for Conservat. Work
Office Chair
Book Case over all size of 66”x33”x15”
Hydraulic Dental Chair
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Valve
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Valve
Ultrasonic Scalar Filter
Ultrasonic Scalar Valve
Ultrasonic Scalar Filter
Ultrasonic Water Regular
Ultrasonic Scalar Fuse
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Cord
Ultrasonic Connector
Ultrasonic Scalar Filter
Ultrasonic Scalar Cord
Ultrasonic Scalar Filter
Ultrasonic Scalar Cord
Ultrasonic Scalar Cord
Ultrasonic Scalar Cord
Ultrasonic Scalar Filter
Ultrasonic Scalar IRF
Ultrasonic Scalar Cord
Ultrasonic Scalar Filter
Ultrasonic Connector
Ultrasonic Scalar T.L.
Ultrasonic Scalar 10 OHM
1
1
4
2
1
1
10
2.000
10.000
0.200
0.200
40.000
40.000
0.500
2
1
10
1
1
5
1
2
1
2
4
2
1
1
1
1
1
1
1
0.050
0.100
0.500
40.000
5.000
0.050
0.500
1.000
2.000
80.000
0.200
50.000
0.200
0.050
20.000
40.000
2.000
30.000
50.000
Deptt. of Orthodontics
Dental Store
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
118
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
Ultrasonic Scalar PS 4K
Ultrasonic Scalar IRF
Ultrasonic Scalar PRLL
Ultrasonic Scalar T.L.
Ultrasonic Scalar 4106, 4040, 4061, 31414, 4072
Ultrasonic Scalar 100 OHM
Ultrasonic Scalar Cord
Ultrasonic Scalar Filter
Ultrasonic Connector
Ultrasonic Scalar Holder & Switch
Ultrasonic Scalar Cord
Ultrasonic Connector
Ultrasonic Scalar Green Led
Ultrasonic Scalar TL 274, 4106, 4011, 4040, BSRI, 32 V55, SCR, 10
OHM
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Transformer
Ultrasonic Scalar Cord
Ultrasonic Scalar Transformer
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
Ultrasonic Scalar Cord
Ultrasonic Scalar Filter
Ultrasonic Scalar Transformer
PUC Board SPC & 664 for OPG System
Ultrasonic Scalar Cord
Ultrasonic Scalar PCB
Circular Fluroscent Ring for RSM-9
Ultrasonic Parts 10557, TR9520, M311, Relay L 1
Ultrasonic Parts 10557, TR9520, M311, Relay L 2
X-Ray Generator (Tube) Spch 227
1
1
1
1
5
4
1
1
1
2
1
1
1
15
1
1
1
1
1
1
1
1
1
1
1
1
1
2
5
1
4
4
1
Total weight of Dental Store from Sr.No.3262 to 3322 is 20.000 kgs.
Cenral Store
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
P-IV Computer with Monitor and printer
BP Handle
Pentilisas Elevator set P4
Air Condition Samsung
Spare light common for signoscope
Girip Handle
Urinary Bottle Cap. 1 ltr
Photo State Copier
Trocer & Cannula
Cooler Fan
Cooler Motor
Petromax Lamp (old)
Forceps plain Cutter 15”
Forceps Sezing Holding tube
Gasket for autoclave
Trachostomy tube metal
Stand Tripot Iron
Voltage Stabilizer 0.5KVA
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
27
27
1
1
1
46
1
12
1
4
44
1
1
1
13
8
6
10.000
0.270
0.200
50.000
0.500
0.100
4.600
10.000
2.000
1.000
8.000
44.000
0.010
0.010
2.000
3.000
2.000
6.000
119
3341
3342
3343
3344
3345
3346
3347
3348
3349
Voltage Stabilizer 3KVA
UPS Offline (Sukam) 625 KVA
Waste Paper Basket
PVC Chair Seat
Central Table
Black Board
Water Cooler 150 ltr, Sidwal
Weighing Machine Portable plated form cap. 300 kg
Locks
3350
3351
Monitor Gold way model UT 4000F with Accessories
Monitor make datex compact Accessories
1
2
3
59
2
3
1
1
10
6.000
10.000
0.500
30.000
10.000
5.000
50.000
50.000
3.000
4
1
10.000
3.000
1
15.000
1
85.000
1
1
1
1
4
2
2
1
400.000
300.000
250.000
90.000
60.000
14.000
20.000
7.000
Surgery-I (Ward-6)
Onco Surgery
3352
Monitor make Datex off Medasib Compact with Accessories
3353
AC 1.5 Ton Jainson Make
PA to Director
BOILER SECTION
3354
3355
3356
3357
3358
3359
3360
3361
Primary Chamber
FD Fan Foundation, Blower housing, Truncking
Chimney Ducts Piping
Water Softner
Feed Pump
Blower DownCock
Hobery Housing
Electrical Boiler Panel
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
Dr. Almirah
Table Office
Doctor Table
Bowel Stand
Examination Table
Bed Side Locker
Bed Side Screen
Pt. Trolley
I/V Stand
Iron bed
Iron Bench
Sterlizer
Iron steel
Urinal Pot Male
Bed Pan Female
Chammechi
Weight Machine
Revolving Stool
Poisionous Almirah
Gloves Stand
Foot Suction Machine
Extraction Foup
R Tree Forceps
Tweezer
Chisel
Elevator
Exavator
DIGHAL
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
1
1
2
3
9
7
7
1
1
9
3
4
7
3
10
3
2
6
1
1
1
15
2
10
1
5
5
20.000
15.000
15.000
1.000
4.000
2.000
1.000
3.000
3.000
8.000
15.000
20.000
14.000
0.300
0.005
0.100
2.000
12.000
12.000
5.000
4.000
0.100
0.025
0.020
0.030
0.030
0.020
120
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
Probe
Burnisher
Condenser
Plastic Filling Instrument
Bone File
Carver
Curreters
Hand Scalers
BP Handel
Cement Spatula
Pliers
Scissor
Cheeter Forceps
Tooth Forceps
Sponge Holder
Needle Holder
Tongue Presser
Mirror
Sterilizer
Stainless Steel Tray with cover
Hammer
White Tray
Forceps Set
Sterilizer
Dialater set
Cannula Steel
Basin Tray
Solution Basin
Instrument Trey with cover
Sims spactlum
Dressing Jar with cover
Plain forces
Sponge Holder
Needle Holder
Scissor
Artery forceps
Strengidartry forceps
Kochar curved
Kochar Stag
Sterilization drum
Oxygen key
Outlet Delevery forceps
Oxygen stand
Stethoscope
Laryngoscope
Instrument Trolley
Instrument Trolley
Baby Weight Machine
Plastic Saw Handle
Remover with pus
IUD Hook
Farmer Both Forceps
MTP Set
Tooth Forceps
Foot Step
Exhaust Fan
Water Cooler
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
6
4
6
5
1
6
17
1
1
1
1
1
1
1
1
1
1
8
1
1
1
2
1
1
1
3
2
1
6
1
1
5
1
1
5
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
0.020
0.030
0.030
0.020
0.050
0.020
0.050
0.030
0.010
0.020
0.080
0.050
0.030
0.100
0.015
0.015
0.020
0.030
2.000
0.300
0.250
0.200
1.000
4.000
0.150
0.015
0.050
0.250
0.200
0.130
0.350
0.015
0.020
0.010
0.025
0.050
0.025
0.015
0.025
1.500
0.025
0.050
3.000
0.150
0.200
4.000
4.000
3.000
0.600
0.060
0.100
0.120
0.500
0.020
5.000
7.000
49
121
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
Ceiling Fan
Stabilizer
Suction Machine
Hostel Bed
Microscope
Office Almirah
Bp Apparatus
Stethoscope
Stethoscope
Bp Apparatus
Bp Apparatus
Oxygen Flow Meter
Nebulizer
Stethoscope
Torch 2 cell
Stablizer
Donga Ss
Cup
Hotcase
Tray Big SS
Glass SS
Jug Ss with cover
Measurement (Mug)
Tea Chulani SS
Soap Chulani Ss
Toster
Spoon SS
Pressure Cooker United
Plate SS
Katori Ss
Donga Spoon
21
1
1
16
3
1
4
1
6
4
2
2
2
2
2
1
4
24
1
2
15
2
1
2
2
1
24
1
15
30
2
3477
Gamma Camera
Table
Monitor, Keyboard & Mouse
CPU (Business Station)
Isotope Calibrator RC 4714
Visiplex Cc M 200
Trolley
Lead Bricks
Intermediate Corner
Lead Pot
TC 99 Generator
Duet Outlet
Battery Rack with 9 Battries
UPS Big size (EC-Kirloshar, Micro 1100 UPS)
Gamma Camera well type
Gamma Dose
All gas Calibrator for RAIU
Film Developer
Voltage Stabilizer
Brush & Laumb Spectronic
Electronic Counter
Empty Wooden boxes
4.000
4.000
9.000
25.000
40.300
30.000
0.800
0.150
0.100
0.400
0.400
0.250
0.600
0.100
0.100
4.000
0.210
0.040
0.500
0.200
0.030
0.300
0.080
0.040
0.035
0.300
0.010
2.000
0.040
0.040
0.080
RADIOTHERAPY
1 nos.
1
1
1
1
1
1
220
24
6
1
1
1
1
2
1
1
1
3
20
1
4
80 kg
NOTE:1. Wooden Scrap = 6000 Kgs. (approx.)
2. Iron Scrap, Machinery & Equipments = 67608.26 kgs. (approx.)
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
122
B.
CONDEMNATION OF 780 –C COBALT -60
TELETHERAPY UNIT OF PT. B.D.SHARMA PGIMS,
ROHTAK:
Sr.
Name of items
Qty. to be
condemned
1.
Theratron 780C Telecobalt Machine Without Source and Source
Head and Radioactive Parts.
2.
All condemned spare parts of 780C Machine ‘As and Where’
basis.
One
Approx.Wt.
(Kg)
775 kgs.
05 kgs.
TERMS & CONDITIONS FOR CONDEMNED STORE:
1.
2.
3.
4.
5.
6.
7.
Conditional tenders shall not be considered.
The item shall have to be removed from the Institution as required and the cost shall be borne by the firm.
The item(s) shall be lifted on ‘As and Where’ basis.
The quoted rates shall be valid for a period of six months from the date of opening of Tender.
The loading and unloading in the truck shall have to be arranged by the contractor at his own expenses.
Weighing charges on DHARAM KANTA will have to be borne by the Contractor.
Payment of goods will have to be deposited with the Cashier of the Institute within 15 days from the issue
of Sale Order.
8. Contractor shall comply with all the instructions mentioned in Sale Order.
9. The sales tax/income tax, if applicable, will be borne and deposited by the contractor before the material is
lifted. If the contractor fails to do so and the goods are seized by the Sales Tax/Income Tax Office, then
the contractor shall be responsible to pay the penalty as imposed.
10. Condemned store can be inspected in the premises (CENTRAL STORE AND DEPTT. OF
RADIOTHERAPY) of the Institution on any working day.
11. The Vice Chancellor reserves the right to reject the offer without assigning any reason. The decision of
the Vice Chancellor UHS Rohtak shall be final and binding on the tenderer/Contractor.
12. In case of failure to honour the Sale Order within 45 days, the earnest money will be forfeited.
Sd/-
Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
123
GROUP NO. 19
PURCHASE OF ITEMS FOR SETTING TELEPHONE CONNECTIONS IN THE
BUILDINGS TO BE TRANSFERRED FROM MDU TO UHS ROHTAK—TELEPHONE
EXCHANGE
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1
Name of items
Telephone Cable 200 Pair
2
Telephone DP Box 200 Pair
3
Telephone Wire 2 Croe
PVC wire
4
Table type telephone set
5
Telephone Set Table Type
PLAN 1+1 Set
6
Telephone Cable
(20 Pair, 10 Pair, 5 Pair)
20 Pair OP Box
7
Specifications
Copper conducted colour coded each wire, size
0.61 mm, 2 core (ARMD), ISI Mark, Jelly Filled
Cable. Make--- Delton, ITI, Mazda
Crown type DP Box
Make – Usha, ISI, Mazda
Copper conductor , 2 core, PVC insulated drop
wire, size–0.61 mm, ISI Mark,
Make--- Delton, ITI, Mazda
Facility of Redial, Fast Dial, P/Tone and adjustable
ringer facility, EPT, ISI Mark
Make—PLAN TYP MODEL BEETEL N.B.70
Facility of Redial, Flash, Tone Pulse, Busy Line
Indicator, Intercom facility, Ringer control, ISI
Mark Make— Beetel, ITI
Jelly filled cabl,e copper conductor, 0.61 mm, ISI
Mark. Make–Delton, ITI, Mazda
Crown type DP Box
Make—Usha, ITI, Mazda
Sd/Sr.Professor I/c Purchase.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
124
GROUP NO. 20
PURCHASE OF ZYM ITEMS(TREAD MILL AND UP RIGHT BIKE
---STATE INSTT. OF MENTAL HEALTH, PGIMS UHS ROHTAK.
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
Sr.
Name of the
items &
quantity
Model
name
1
Treadmill
7900
Pro
Body
strong
Product
image
Specification
Outer frame width : 900 mm
Motor hp : 4.5 hp/ 7 hp max
Ac motor
Main motor pulley width : 31 mm
Make
Earnest
Money
General
make to
be
quoted
by the
tendrer
himself
2800
Remarks
Main motor length with pulley : 290 mm
Drive invertor size : 175 mm x 118 mm x 108 mm
Plastic foot rail dimension : 135 mm x 1438 mm
Length of full treadmill: 2030 mm long
Width of pillar from base to meter : 140 mm
Step up height from floor to side plastic base : 215 mm
Meter display : 7 screen LED display
Separate led for incline, distance, speed, calorie, time, pulse
Speed: 1-24 km/ hr
Incline : 0-24 level
Fan for air circulation on users face
24 pre set programs
Speed emergency buttons : 3, 6, 9, 12 ,15
Incline emergency button : 3,6,9,12,15
Size of led display for incline, speed, calorie, time, pulse :
60 mm x 20 mm
LED dot matrix center display has : 8 LEDS vertical x 16 led
horizontal row display
P u handle grip
Dimension of p u handle grip : 75 mm x 410 mm x 90 mm
Hand pulse is on front bar only. Not side bars
24 programs are represented by 24 separate LEDS
Running time : 24 hrs
Wooden deck size : 25 mm thick
Height of rubber cushioning under the treadmill deck : 30 mm
Total rubber cushions : 4 numbers
Air pad cushioning system under the deck
Total 2 air pads under the deck
Deck size : 1440 mm x 822 mm
Mobile holders on left and right side
Imported only
…2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
125
-22
Upright
Bike
FT 6806
E
Bodystr
ong
Self powered system
Screen shows : Watts
Size of display screen showing watts : 37 mm x 18 mm
Screen shows : BPM
General
make to
be
quoted
by the
tenderer
himself
1000
Size of display screen showing bpm : 37 mm x 18 mm
Screen shows : RPM
Size of display screen showing rpm : 37 mm x 18 mm
Resistence level : 1-10
Display screen size showing time, distance, calorie :
50 mm x 18 mm
Level selection separate buttons : 1,2,3,4,5,6,7,8,9
Program selection butoon : 1,2,3,4,5,6,7,8,9
Minimum 30 green lit led for percentage display
Seat dimension : l-310 mm x 280 mm
Adjustable seat
Length of lever used to adjust the seat 220 mm long
Crank size : 32 mm x 20 mm
Meter display outer dimension : 360 mm x 270 mm
Pulse holding bar at the front
Length of pulse holding bar : 480 mm
Foot base covered in plastic showcase
Outer dimensions : 1060 mm x 490 mm x 1550 mm
User weight : 150 kg
Imported only
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
126
GROUP NO. 21
PURCHASE OF ‘M&E’ ITEMS---UROLOGY
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
Sr.
1
Name of item with specifications
ULTRASONIC COAGULALTION & CUTTING DEVICE:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Qty. (Nos.)
01
State of art ultlrasonic coagulation and cutting device . It should have rapid dissection and
reliable hemostaasis up to 5 mm vessels with a single instrument.
Should have minimum thermal spread.
Should have pointed jaws mechanism for better grasping and dissection .
Should have frequency 40 KHz or more.
Transducer should have autoclavable type.
Transducer should have unlimited activation.
Should have touch screen LCD display for ease of user interface.
Device should be supplied with following instrumentations:
a) Ultrasonic Generator
b) Foot switch
c) Ultrasonic Transducer
d) 5 mm hand piece probes for lalparoscopic procedures( 5 pcs).
Should be upgradable to synergistic of ultrasonic energy combined with
Bipolar HF energy.
Should be upgradable to delivery of both ultrasonic and bipolar energy through
one instruments simultaneously.
Warranty should be one year.
Should have installation in India and performance record should be enclosed.
The device should be FDA /CE approved.
SPECIFICATION ARE GENERALIZED IN NATURE.
2
URETEROSCOPE:.
1.
2.
3.
4.
5.
6.
7.
8.
9.
3
01
The ureteroscope sheath should have atraumatic distal tip.
The ureteroscope distal sheath size should not more than 6.5. Fr..
The uretoscope should have laterally offset /angled eye-piece.
The instruments channel of size 3-4 Fr.
It should have working length not less than 40 cm.
Warranty should be two years.
Should have installation and performace record should be enclosed.
It should be supplied with compatible LED light source with minimum 150 watt
or more power.
Accessories:
a) Formalin chamber-01
b) Stone grasping forcep- o1
SPECIFICATION ARE GENERALIZED IN NATURE.
ULTRA THIN URETERORENOSCOPE:
01
1.
2.
3.
4.
5.
6.
7.
The ureterorenoscope should be compact with distal tip size should not be more than 4.5 Fr.
The sheath size should not be more than 6.5 Fr.
Angle of view should be in between 5-10 degree.
The uretorenoscope should have laterally eye-piece.
The instrument channel should be of 3 Fr. Or more.
It should be autoclavable.
Accessories:
a) Stone removal forceps- 02
b) Chamber- 01
8. Warranty should be two years.
9. Should have installation and performace record should be enclosed.
…2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
127
-24
URODYNAMICS MACHINE:
1.
Should have the facility to perform uroflometry, cystometry, pressure flow Study UPP,
leak point pressure,.
2.
Should have minimum 4 pressure channels and should be supplied with 3
Reusable / disposable pressure transducers.
3.
Should have fully integrated urodynamic processing system and integrated
Travel trolley to fit the complete UDS alongwith PC.
4.
The software should have option for replay of recorded graphs.
5.
Should have facility of rtefact detection .
6.
Micturation chair for flow system.
7.
Should have Urine container and funnel reusable & easy to clean.
8.
One set of all standard accessories including catheters and consumables to perform
complete investigations as per specification are to be supplied.by the firm at the time of
installation.
9.
Rate of accessories including consumables to be quoted separately.
10. Automatic analysis and report generation with digital database storage and retrieval
facility is required.
11. The system should have inbuilt Panel PC system with latest PC configuration, 19”
Touch Screen monitor & colour laser printer.
12. The system should be available with patient couch.
13. Should have FDA/CE approval.
14. Should have installation in India and performance record should be enclosed.
15. Warranty for two years and AMC/CMC for next five years.
16. Voltage stabilizer to be provided.
17. Training should be provided to the technician at hospital site on minimum 30 patients.
01
SPECIFICATIONS ARE GENERALIZED IN NATURE.
Sd/-
Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
128
GROUP NO. 22
PURCHASE OF ‘M&E’ ITEMS---PSYCHIATRY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
Name of item with specifications
1.
MULTI PARA MONITOR:
-
Qty.
((Nos.)
02
Should be able to monitor ECG, NIBP, SPO2, EtCO2 and Respiration, Temperature (2CH), ST
Segment and arrhythmia analysis.
Should have minimum 10” colour TFT display with touch screen operation and should display
upto 6 waveforms.
Monitor should be modular having Facility for up-gradation with separate modules
(OPTIONAL) for IBP by just adding the Module
The modules NIBP, ECG, SPO2, Temperature and IBP should be interchangeable between
monitor
Should be suitable for adult, pediatric usage.
Should have facility for arrhythmia and ST Segment analysis
Should have respiration rate measurement using impedance method
Should use oscillometric technology for NIBP Measurement with selectable manual,
automatic (selectable measurement interval 1 – 240 mins.)
Should have at least 72 hrs of trend facility for all parameters and critical alarm events recall
for at least 50 alarms events.
Should have selectable display patterns including standard, large font and trends
Should have graded and colour coded audio – visual alarm for all parameters for all
parameters.
Should have facility to enter patient information in the monitor for records and management
Should be easy to operate
Should be easy to operate using a single dial
Should have inbuilt battery back up of atleast 4 hrs
Should be electro surgical unit & defibrillator protected.
Should have inbuilt thermal recorder with selectable printing speeds
Should conform to international safety standards such USFDA and CE for medical equipment.
Should have local service facility. The service provider should have the necessary equipments
recommended by the manufacturer to carry out preventive maintenance test as per guidelines provided
in the service/ maintenance manual.
Should provide comprehensive warranty of five years and CMC for 5 years after warranty.
Rates of accessories (after warranty) to be quoted separately.
All specifications are generalized in nature.
Each Monitor should be supplied complete with
ECG Lead (5 lead)
Reusable NIBP Cuff (Adult/ Paed,)
SPO2 Sensor with extension cable (4 Adult &2 Paed cable)
Temperature probe
2 pc
2 pc each
2 pc each
2 pc
..2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
129
-22.
DEFIBRILLATOR:
1.
1.1
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
4.
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5
5.1
5.2
5.3
6
6.1
6.2
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
01
Function:Defibrillator is required for reviving the heart function by providing selected quantum of
electrical shocks with facility for monitoring vital parameters.
Operational Requirements
Defibrillator should be Bi-Phasic, light weight and latest model
Should monitor vital parameters and display them
Should print the ECG on thermal recorders
Should work on Manual and Automated external defibrillation (AED) mode
. Manual selection up to 360J.
Should be capable of doing synchronized cardio version
Can be operated from mains as well as battery
Should have defibrillator testing facility
Demonstration of the equipment is must
Technical Specifications
Should be a low energy Biphasic defibrillator monitor with Recorder, having capability to arrest
all arrhythmia within a maximum energy of 360 Joules
Should monitor ECG through paddles, pads and monitoring electrodes and defibrillate through
pads and paddles, Should have automatic lead switching to see patient ECG through paddles or
leads.
Should measure and compensate for chest impedance for a range of 25 to 150 ohms.
Should have a built in 50mm strip printer/ thermal recorder.
Should have charging time of less than 5 seconds for maximum energy charging indicator
should be there.
Should have external electroluminescent display for viewing messages and ECG wave form of 4
seconds
Should have external & internal paddles with paddles contact indicator-for good paddle contact.
Single Adult and paediatric paddles should be available.
Should have event summary facility for recording and printing at least 250 events and 50
waveforms.
Should have a battery capable of usage for at least 90 minutes or 30 discharges.
Should be capable of printing reports of Event summary, configuration, self test, battery
capacity etc.
Should have facility for self test/ check before usage and set up function
Should have SPO2 integrated
Should be capable of delivering energy in increments of 1-2 joules upto 10 J and increments of 5
to 20 J upto 50 J there after
Should have user friendly 1,2,3 color coded operation.
System Configuration, spares & consumables
Defibrillator -01
Paddles Adult /paediatric (pair)-01
Patient cable -02
ECG Rolls -50
Disposable pads -10 nos.
Reusable SPO2 Finger Probe –Adult -02
Complete set of ECG leads -02
Environmental factors
The unit shall be capable of operating continuously in ambient temperature of 10-400C and
relative humidity of 15-90%
The unit shall be capable of being stored continuously in ambient temperature of 0-500C and
relative humidity of 15-90%
Shall meet IEC -60601-1-2:2001 (Or Equivalent BIS) General Requirements of Safety for
Electromagnetic compatibility.
Power supply
Power input to be 220-240VAC,50Hz
Resettable over current breaker shall be fitted for protection
Standards, Safety and Training
Should be FDA and CE approved product
Electrical safety conforms to standards for electrical safety IEC-60601-1 General requirements
and IEC-60601-2-25 Safety of Electrocardiograms.(OR EQUIVALENT BIS Standard)
Drop test- withstands 1 meter drop to any edge, corner or surface
Should conform to international test protocols on exposure to shock forces and to vibration
forces. The standard should be documented.
Should meet IEC 529 level -2 (IP2X) for enclosure protection solid foreign object ingress.
Should meet IEC 529 level 3(IP3X) (spraying water) for enclosure protection, water ingress.
Should have local service facility.
The service provider should have the necessary equipments recommended
by the manufacturer to carry out preventive maintenance test as per guidelines provided
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
130
in the service/ maintenance manual.
7.8
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
Should provide comprehensive warranty of five year and CMC for five years after warranty.
Rate of asscessaries
(after warranty ) to be quoted separately.
Documentation
User manual in English
Service manual in English
List of important spare parts and accessories with their part number and costing
Certificate of calibration and inspection from factory
Log book with instruction for daily, weekly, monthly and quarterly maintenance checklist. The
job description of the hospital technician and company service engineer should be clearly spelt
out.
List of equipments available for providing calibration and routine maintenance support as per
manufacturer documentation in service / technical manual.
Compliance report to be submitted in a tabulated and point wise manner clearly mentioning the
page/para number of original catalogue / data sheet. Any point, if not substantiated with
authenticated catalogue / manual , will not be considered.
All specifications are generalized in nature.
3.
COMPUTERIZED ECT MACHINE (with facility for brief and ultra brief pulse modes)
02
Essential Features:
1. Should deliver current of bi-directional square wave ultra brief pulse of 0.3ms
2. Should have 4 channels EEG, 1 channel ECG monitoring with 1 channel optical motion sensor to monitor the
movement during seizure for providing assessing seizure efficacy.
3. Should have four different stimulus parameter knobs to vary pulse width, frequency, duration and current.
4. Should have facility to monitor real time dynamic impedance during procedure & also static impedance.
5. Should have LCD with Touch screen display with impedance display.
6. Patient impedance from 100-5000 Ohms.
7. Should be able to deliver ECT from voltage 50-400Volts.
8. Should have protection against paddle to paddle short circuit or open circuit conditions.
9. The Stimulus Control push button to be hinged for prevention of accidental delivery of stimulus and should have visual
indication of the status of Stimulus enable, Delivery or fault.
10. Should have stimulus current from 500-800mA, Frequency 20-120Hz, Pulse width – 0.5-1.5msec, Stimulus duration of
0.5-4 sec.
11. Minimum Power : 0.6 Joules for 220 ohm patient impedance
12. Maximum Power : 202.8 Joules for 220 ohm patient impedance
13. Charge : 5.0 – 1152m Coulombs in both manual and timer mode.
14. Should have 2 channel thermal chart recorder with gain knobs for higher resolution printing.
15. Should also have optional facility to connect system to any External PC and will be provided with monitoring software to
view physiological monitoring. The traces should be available in real time throughout the treatment. The data can
be stored with all the treatment parameters on the PC or can be converted in to text format. Remote monitoring
software should have features :
· View up to six traces of real-time monitoring on a PC monitor: 4 EEG, 1 ECG and1 Optical Motion Sensor
· Treatment parameters, patient data and impedance display also appear on the PC monitor to ensure patient safety.
· Physiological monitoring and treatment data may be stored for later analysis, dosing management or treatment
assessment.
· For automated importation of Remote Monitoring Software data files into an extremely versatile and easy-to-use ECT
database.
16. Should have optional facility of Comprehensive database to store the complete patient information and can be
configured according to user needs.
17. The equipment should be tested and certified by International agencies and should have ISO 9001 certification with CE or
TUV approved.
18. Warranty must be 1 year.
19. ISO / CE certified.
20. Should also quote for CMC / AMC for the next five years.
21. Installation on turnkey basis.
22. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the
warranty period.
All specifications are generalized in nature.
..4.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
131
-44.
01
BOYLE`S APPARATUS:
The technical specifications for the apparatus are as follows:
1.Should be made of rigid tubular stainless steel/ Power coated steel.
2. Should have gas specific yokes with sliding stainless steel clamping bars for easy delivery-two each
for oxygen and nitrous oxide.
3. Should have stainless steel top.
4.Should have large diameter antistatic caster wheels with ball bearings for easy and smooth mobility,
Should have Oxygen Analyser.
5.The front caster should have brakes.
6.Should have pressure gauges for nitrous oxide and oxygen.
7.Should have pressure regulators for nitrous oxide and oxygen.
8.should have non-return pressure release valve to minimize the risk back flow of gages and blow off
when pressure is below 125kPa.
9.Should have a oxygen failure warning device which delivers audible alarm (minimum 10 seconds)
when oxygen supply falls below 205kPa.
10. Should have a spacebar minimum for one vaporizers of choice Selectac type.
11.Should have long flow meter tubes (at least 230mm),rotating bobbin flow meter calibrated in
double/triple scale for accuracy and clarity of reading.
12.Should have an in-built hyposia guard.
13.Should have oxygen flush emergency outlet.
14. Easily movable circle absorber system with single or double chamber.
15.Easy open and close switch be available at a convenient angle.
16. Should have a rigid toptray for monitor.
17. Should have built in oxygen out let for driving ventilators
18. Should have space for ventilators.
19. Should have extended back for two cylinders.
20.Should have atleast one built in drawer.
21.The apparatus should have BIS/Isi/USFDA/CE approval.
22.Should have local service facility. The service provider should have the necessary equipments
recommended by the manufacturer to carry out preventive maintenance test as per guidelines provided
in the service/maintenance manual.
23.Should provide comprehensive warranty of five years and AMC for 5 years after warranty.
24.Rates of accessories (after warranty )to be quoted separately.
The approximate cost of each equipment would be Rs. 850000/- and the specifications mentioned
above are of generalized in nature.
All specifications are generalized in nature.
5.
01
HIGH PRESSURE OXYGEN FLOW METER:
1.
2.
3.
4.
5.
6.
Should fit with D-type Oxygen Cylinders
Should have separate High pressure regulator fitted with separate gauges for measure in flow and
out flow pressure.
Should have knob for controlling out flow pressure manually.
Repair and service of flow meter should be locally available.
Should provide comprehensive warranty of five years and AMC for 5 years after warranty.
The specifications are generalized in nature. The approximate cost of the equipment is Rs 3000/.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
132
GROUP NO. 23
PURCHASE OF ‘M&E’ ITEMS------PAEDIATRICS MEDICINE
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Earnest money
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance Pt.B.D.Sharma University of
Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
1
Name of item with specifications
UPS:
Qty. ((Nos.)
04
Specifications:
Should have capacity of 10 KVA
Single phase UPS
30 minutes battery backup
One year warranty for UPS & two year for batteries
Batteries rack required
2
SPECIFICATIONS ARE GENERALISED IN NATURE
PULSE OXYMETER:
Specifications:
• SPO 2 Accuracy +/- 2%
• SPO 2 Averaging 8 Pulse beats
• SPO 2 Pulse rate averaging 8 seconds
• Response time instantaneous
• Sensor reusable neonatal size & Pediatric size
• Display waveform, digital pulse amplitude.
• Should have alarms both audio and visual.
• Should have a battery backup for at least 4 hours.
• Should operate on mains (220-240 V) as well as on battery.
12
SPECIFICATIONS ARE GENERALISED IN NATURE
3
04
NIBP UNIT:
Specifications:
•
Unit should be compact and portable allowing for uninterrupted monitoring
•
Should use oscillometry for BP measurement.
•
Should have capability for accurate measurement of BP
•
Unit should have large LED display for Systolic, Dystolic, Mean Pressure, Pulse Rate.
•
Unit should be suitable for adult, pediatric and neonatal patient and adult, pediatric neonatal
reusable cuffs should be provided.
•
Unit should have Auto audible and visual alarms of blood pressure-systolic, dystolic and mean.
•
Should measure systolic, diastolic and mean arterial BP and heart rate.
•
Power: 220 V & built-in battery with backup of more than 2 hours.
•
Measurement unit should be mmHg/Kpa selectable.
•
Measurement Range should be Adult/Pediatric: 15-250 mmHg
•
Resolution should be 1 mmHg
•
Should have minimum 300 data record memory
NOTE:
•
•
•
•
•
The equipment should operate independently on mains (220-240 V) as well as batteries.
Minimum battery life should be 2 years.
The instruction manual and service manual are part of the equipment and shall be provided
along with.
Warranty for two years from the date of satisfactory installation.
AMC for 5 years beyond warranty period must be included in the invoice with details of terms
and conditions of repair and payments.
Demonstration of the equipment is required.
SPECIFICATIONS ARE GENERALISED IN NATURE
..2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
133
-24.
10
ELECTRONIC WEIGHING MACHINE NEWBORN:
Technical Specifications:
•
Digital weighing scale
•
Range 0-10 kg
•
Accuracy: + 5 grams
•
Display: Bright up to 3 decimal points
•
Units: in grams/kg
•
Baby pan/platform: 50 cm x 30 cm +/– 10 %
•
Easily cleaned and disinfected
•
Tare facility
•
Should be able to stabilize the readings in spite of baby movements
•
Memory: Up to 10 readings
•
Mounting: On a lightweight compact mobile trolley
System Configuration Accessories, spares and consumables:
•
System as specified•
All consumables required for installation and standardization of system to be given free of cost.
Environmental factors:
•
The unit shall be capable of being stored continuously in ambient temperature of 0-50deg C and
relative humidity of 15-90%
•
The unit shall be capable of operating continuously in ambient temperature of 10 -40deg C and
relative humidity of 15-90%
Power Supply:
•
Power supply: 220/240V 50/60 Hz with DC adaptor. Capable of running on battery
Standards, Safety and Training:
•
Should be FDA, CE, UL or BIS approved product
•
Manufacturer/Supplier should have ISO certification for quality standards.
•
Shall comply with electrical safety requirements as per IEC or BIS regulations.
•
Comprehensive warranty for 2 years and 5 years CMC after warranty
Documentations to be provided:
•
User/Technical/Maintenance manuals to be supplied in English.
•
Certificate of calibration and inspection.
•
List of Equipments available for providing calibration and routine Preventive
•
Maintenance Support. As per manufacturer documentation in service/technical manual.
•
List of important spare parts and accessories with their part number and costing.
•
Log book with instruction for daily, weekly, monthly and quarterly maintenance checklist.
•
The job description of the hospital technician and company service engineer should be clearly
spelt out
SPECIFICATIONS ARE GENERALISED IN NATURE
5.
25
INFUSION PUMP (SYRINGE):
Specifications:
PCA upgradeable syringe pump accepting 10, 20, 30, 50 ml syringes of known brands as well as CUSTOM
programmable syringe with facility for time locked BOLUS/PCA facility & administration counter and
display for the same. Minimum six stage programming of target time and target volume. Programmable rate
KVO (keep vein open), LED display of flow rate & LCD display of drug name with multiprogramming
facility, infused volume, infusion time simultaneously, facility to change flow rates in Run condition. (Flow
rate 0.1 ml/hour to 999 ml/hr.
•
Portable, rechargeable battery life minimum for 2 years.
NOTE:
•
The equipment should operate independently on mains (220-240 V) as well as batteries. Minimum battery
life should be 2 years.
•
The instruction manual and service manual are part of the equipment and shall be provided along with.
•
Warranty for two years from the date of satisfactory installation.
•
AMC for 5 years beyond warranty period must be included in the invoice with details of terms and
conditions of repair and payments.
•
Demonstration of the equipment may be required.
•
SPECIFICATIONS ARE GENERALISED IN NATURE
6.
02
FOGGING MACHINE:
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
134
GROUP NO. 24
PURCHASE OF ‘M&E’ ITEMS---A&E DEPTT.
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
Sr.
Name of item with specifications
1.
NEBULIZER:
Qty.
((Nos.)
10
1. Electricity supply should be 220 volts A/C
2. Nebulizer air flow should be ≥5.5 l/min
3. Compressor air flow should be ≥10 l/min
4. Compressor should be able to generate a Pressure of ≥250 kpa(2,5 bar)
5. Size should be compact and light weight
6. Noise level should be ≤56 dBA
7. Capacity of the chamber should be 5-6 ml
8. It should be Class II device (double safety insulation) and Type B
device (device with specific protection against electrical hazards)
and should be CE certified
4. The apparatus should have2 years comprehensive warranty
Certified that specifications are generalized in nature.
2.
DEFIBRILLATOR WITH ECG MONITOR:
02
UNSPSC Code: 42172101
ECRI Code: 17-116
1 Description of Function
Sl Name
1.1 Defibrillator is required for reviving the heart functions by providing selected quantum of electrical shocks with facility
for monitoring vital parameters.
2 Operational Requirements
2.1 Defibrillator should be Bi- Phasic, light weight and latest model
2.2 Should monitor vital parameters and display them
2.3 Should print the ECG on thermal recorders.
2.4 Should work on Manual and Automated external defibrillation (AED) mode. Manual selection up to 270 J.
2.5 Should be capable of doing synchronized & asynchronized cardioversion
2.6 Can be operated from mains as well as battery
2.7 Should have defibrillator testing facility
2.8 Demonstration of the equipment is a must.
3 Technical Specifications:
3.1 Should be a Low Energy Biphasic defibrillator monitor with Recorder, having capability to arrest all arrhythmia
within a maximum energy of 360 Joules.
3.2 Should monitor ECG through paddles, pads and monitoring electrodes and Defibrillate through pads and
paddles.Should have Automatic Lead switching to see patient ECG through paddles or leads
3.3 Should measure and compensate for chest impedance for a range of 25 to 150 ohms
3.4 Should have a built in 50mm strip printer/ thermal recorder
3.5 Should have charging time of less than 3 seconds for maximum energy. Charging indicator should be there.
3.6 Should have bright electroluminescent display for viewing messages and ECG waveform of 4 seconds
3.7 Should have external & internal paddles with paddles contact indicator – for good paddle contact. Single Adult
and pediatric paddles should be available.
3.8 Should have event summary facility for recording and printing at least 250 events and 50 waveforms.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
135
3.9 Should have a battery capable of usage for at least 90minutes or 30 discharges.
3.10 Should be capable of printing Reports on Event summary, configuration, self test, battery capacity etc
3.11 Should have facility for self test/check before usage and set up function
3.12 Should have SP02 and NIBP integrated facility
3.13 Should be capable of delivering energy in increments of 1-2 joules up to 30J and increments of maximum 50J
thereafter.
3.14 Should have user friendly 1,2,3 colorcoded operation.
4 System Configuration Accessories, spares and consumables
4.1 Defibrillator -01
4.2 Paddles Adult/Paediatric (pair) -01
4.3 Paddles –Internal (pair) -01
4.4 Patient cable -02
4.5 ECG Rolls -50
4.6 Disposable pads-10 nos.
4.8 NIBP Cuff Adult – 02
NIBP Cuff Paediatrics- 02
NIBP Cuff Infants- 02
4.8 Reusable SPO2 Finger Probe-Adult -02
Reusable SPO2 Paediatric Finger Probe – 02
4.9 Complete set of ECG Leads- 02
5 Environmental factors
5.1 The unit shall be capable of operating continuously\ in ambient temperature of 10 -40 0 C and relative humidity of 15-90%
5.2 The unit shall be capable of being stored continuously in ambient temperature of 0 -500 C and relative humidity of 15-90%
5.3 Shall meet IEC-60601-1-2: 2001(Or Equivalent BIS) General Requirements of Safety for Electromagnetic Compatibility.
6 Power Supply
6.1 Power input to be 220-240VAC, 50Hz
6.2 Resettable overcurrent breaker shall be fitted for protection
7 Standards, Safety and Training
7.1 Should be FDA or CE approved product
7.2 Electrical safety conforms to standards for electrical safety IEC-60601-1 General Requirements and IEC-606012-25 Safety of Electrocardiograms. (OR EQUIVALENT BIS Standard)
7.3 Drop Test-Withstands 1 meter drop to any edge, corner or surface.
7.4 Should conform to international test protocols on exposure to shock forces and to vibration forces. The standard should be documented.
7.5 Should meet IEC 529 Level-2 (IP2X) for enclosure protection solid foreign object ingress.
7.6 Should meet IEC 529 Level 3 (IP3X)(spraying water) for enclosure protection, water ingress.
7.7 Should have local service facility. The service provider should have the necessary equipments recommended by the manufacturer to carry
out preventive maintenance test as per guidelines provided in the service/maintenance manual.
7.8 Comprehensive warranty for 5 years and provision of AMC for next 5 years.
8 Documentation
8.1 User Manual in English
8.2 Service manual in English
8.3 List of important spare parts and accessories with their part number and costing
8.4 Certificate of calibration and inspection from factory.
8.5 Log book with instruction for daily, weekly, monthly and quarterly maintenance checklist. The job description of the hospital technician and company service
engineer should be clearly spelt out
8.6 List of Equipments available for providing calibration and routine maintenance support as per manufacturer documentation in service / technical manual.
8.7 Compliance Report to be submitted in a tabulated and point wise manner clearly mentioning the page/Para number of original catalogue/data sheet. Any point, if
not substantiated withauthenticated catalogue/manual, will not be considered.
8.8 Must submit user list and performance report within last 5 years from major hospitals.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
136
3
ELECTRONIC WEIGHING MACHINE NEW BORN-4:
Technical Specifications
Digital weighing scale
Range 0-10 kg
Accuracy: + 5 grams
Display: Bright up to 3 decimal points
Units: in grams/kg
Baby pan/platform: 50 cm x 30 cm +/– 10 %
Easily cleaned and disinfected
Tare facility
Should be able to stabilize the readings in spite of baby movements
Memory: Up to 10 readings
Mounting: On a lightweight compact mobile trolley
4
System Configuration Accessories, spares and consumables
System as specifiedAll consumables required for installation and standardization of system to be given free of cost.
Environmental factors
The unit shall be capable of being stored continuously in ambient temperature of 0-50deg C and
relative humidity of 15-90%
The unit shall be capable of operating continuously in ambient temperature of 10 -40deg C and
relative humidity of 15-90%
Power Supply
Power supply: 220/240V 50/60 Hz with DC adaptor. Capable of running on battery
Standards, Safety and Training
Should be FDA, CE, UL or BIS approved product
Manufacturer/Supplier should have ISO certification for quality standards.
Shall comply with electrical safety requirements as per IEC or BIS regulations.
Comprehensive warranty for 2 years and 5 years CMC after warranty
Documentations to be provided
User/Technical/Maintenance manuals to be supplied in English.
Certificate of calibration and inspection.
List of Equipments available for providing calibration and routine Preventive
Maintenance Support. As per manufacturer documentation in service/technical manual.
List of important spare parts and accessories with their part number and costing.
Log book with instruction for daily, weekly, monthly and quarterly maintenance checklist.
The job description of the hospital technician and company service engineer should be clearly spelt
out
Specifications Are Generalised In Nature
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
137
1
4.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
138
Sd/Sr/Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
139
SUB GROUP NO.25 (A)
PURCHASE OF ‘M&S’ ITEMS ---PATHOLOGY
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Cost of tender form
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
NAME OF ITEMS
QTY.
PURCHASE OF CONSUMABLES REQUIRED FOR HISTOPATHOLOGY/CYTOLOGY:
1.
2.
3.
4.
5.
Self Adhesive Stickers
24x15mm with rounded edge for use in lab with fine quality of adhesive.
Card Board Boxes for keeping slides and wax blocks (All corners
supported by cloth)
Size: 8”x 6”x1/2”
Hot Plates
Hot plates with three heat control switch round slope 8” diameter made of
cast iron rating 1 KV. 230 v.
AC/DC (Height of body should not be more than 4”)
Tissue Paper roll
Highly absorbent tissue paper
Dropper made of Plastic 5ml
100000
15000
8-10
25 Rolls
10 Pkt x
100pieces/pack
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
140
SUB GROUP NO.25 (B)
PURCHASE OF ENVELOPS FOR X-RAY FILMS--RADIODIAGNOSIS
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Cost of tender form
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
1.
2.
3.
4.
5.
NAME OF ITEMS
QTY.
Envelops of size 8.5”x10.5” of Kraft paper 80-GSM
Envelops of size 10.5”x12.5´of Kraft paper 80-GSM
Envelops of size 12.5”x15.5” of Kraft paper 80-GSM
Envelops of size 14.5”x14.5” of v
Envelops of size 14.5”x17.5” of Kraft paper 80-GSM
70000 Nos.
30000 Nos.
20000 Nos.
20000 Nos.
10000 Nos.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
141
SUB GROUP NO.25 (C)
PURCHASE OF MISC. ITEMS—CENTRAL WORKSHOP
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
NAME OF ITEMS
A.
ELECTRICAL
1
QTY.
L` Type Element
2KW,Make:- Theeta,
Power pack, Dasspass, Scots
10 nos.
2
3KW (ISI) Make:- Theeta,
Power pack, Dasspass, Scots
Auto Spark Plug for High Pressure Sterilizer.
5 nos.
25 nos.
3
High Presser Indicator light Red & Green High Pressure Sterilizer (ISI).
15 nos.
4
5
6
P.V.C. Wire 2 core flexible copper.
Make:- Plaza/parmanu/ Vidyut.
P.V.C Wire 2.5MM copper (ISI)
Make:- Plaza/parmanu/ Vidyut.
PVC. wire 1.5MM copper (ISI)
Make:- Plaza/parmanu/ Vidyut.
7
Power Switch
15/16Amp
Make-Anchor,Girish, Sanico, Esskay (ISI)
Power Socket
15/16 Amp Make-Anchor,Girish, Sanico, Esskay (ISI)
Piano type Switch 6 Amp Make-Anchor,Girish, Sanico, Esskay ISI
Iron Connector 16 Amp. Make-Anchor,Girish, Sanico, Esskay ISI
(Brass Part)
Heating Heater Pin Brass
P.V.C. Electric Tape Roll ISI (Anchor/Steel Grip/Avro)
Hot Air Blower Motor single shaft (Hylax Make type)
as per sample
Hot Air Blower Thermostatic switch
Hot Air Blower Element 4 patti (Usha Make type) & 3 patti.
Hot Air Blower
(Fan Blower only) P.V.C.
Thimble Ring Type 2.5 MM. as per sample
Thimble U Type 4 MM.
as per sample
Thimble U Type 4 MM.
as per sample
Tube Small 1 ½ “ for view box.ISI
Starter 20 W for view box ISI
Pendent Holder ISI
Transformer 2 Amp 12-0-12.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
15 each
100 mtr. /1 bundle
200 mtr /2 bundle
100 mtr/ 1
Bundle.
25 nos.
50 nos.
50 nos.
50 nos.
50 nos.
100 nos.
10 Pcs
100nos
20 nos.
10 each
40 nos.
1 Packet (100)
1 Packet (100)
1 Packet (100)
20 nos.
20 nos.
50 nos.
5 nos.
B.
1
2
Motor Capacitor 10 MFD
Suction M/c. Rubber /PVC.
Porcelain Connector for heater
Welding Section
M.S. Tikki
Kunda Chapka 4” inch.
3
Kunda Chapka 3 inch.
100 nos.
4
1” X 1” Square. Rubber Shoe (Grommet)
10 dozen.
C.
1
2
3
4
5
6
7
8
9
10
INSTRUMENT SECTION
BP Apparatus Cloth
BP Apparatus Hinges Set
BP Apparatus Washer
BP Apparatus Glass tube
Weight Machine Spring as per sample
Weight Machine No. Dial as per sample
Weight Machine Spring Set as per sample
O2 Cylinder flow meter complete
O2 cylinder flow meter knob only
Nebulizer washer set as per sample
50 nos
50 pair
100 nos
50 nos
20 nos
10 nos
30 nos
50 nos.
30 nos.
50 nos.
as per sample
5 nos.
20 mtr.
20 nos.
20 kg.
100 nos.
(without assembly)
…2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
142
-2D.
1
2
3
4
5
6
7
8
9
10
E.
1
2
3
4
5
6
7
8
9
10
11
F.
1
2
G.
1
2
3
4
5
6
7
REFREGRATION SECTION
Capillary copper tube 0.31”
Brazing rod
FLUX
OLP 1/6 HP
PTC Relay LG
Gas HC
Teflon tape
Condenser clamp
Dryer (Strainer)
Compressor rubber gromeet
PAINTING SECTION
Synthetic Enamel Oxford Blue paint Make. (Nerolac/ICI Dulux/Asian) Make.
Synthetic Enamel Oxford Green paint Make. (Nerolac/ICI Dulux/Asian)
Synthetic Enamel Oxford Yellow paint Make. (Nerolac/ICI Dulux/Asian)
Synthetic Enamel Oxford Sky blue paint Make. (Nerolac/ICI Dulux/Asian)
Emery paper wooden
Painting brush 2”
Painting brush 3”
Painting brush 1”
Old Dhoti
Painting Patti small 4”
Painting Patti big 6 “
FITTER
Hydrolic oil
Grease
PROPRIETARY ITEMS.
300 feet
2 kg
250 gm
20 nos.
10 nos.
5 cane
40 nos.
80 nos.
60 nos.
50 nos.
5 ltr/ 1 ltr packing
5 ltr/ 1 ltr packing
5 ltr/ 1 ltr packing
5 ltr/1 ltr packing
100 nos.
40 nos.
20 nos.
20 nos.
30 nos.
20 nos.
20 nos.
10 ltr.
5kg
3 nos.
Regulator of Remi make Centrifuge Machine Model no. R-23, RPM 7000 Amps, 3.8
Electric needle & syringe destroyer spares of MICROSIL MODEL NO.ND-120 On/Off Switch
MICROSIL MODEL NO.ND-120 Electric needle & syringe destroyer
MICROSIL MODEL NO.ND-120 Transformer for Electric needle & syringe destroyer
SARATECH Electric needle & syringe destroyer Model no.100 VA/60 VA needle cutter set including blade
SARATECH Electric needle & syringe destroyer, Model no.100 VA/60 VA Transformer
Timer Relay Siemens as per sample
50 nos.
100 nos.
20 nos.
50 nos.
10 nos.
2 nos.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
143
SUB GROUP NO.25 (D)
PURCHASE OF ‘M&E’ ITEMS----GLUCOSE MFG. UNIT
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Cost of tender form
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
NAME OF ITEMS
1.
SEMI AUTOMATIC ROPP CAP SEALING HEAVY DUTY
MACHINE:
Semi Automatic ROPP cap sealing heavy duty machine covered with S.S
304 material & having capacity to seal 30 to 40 bottles/minute .Machine
shall be provided with geared motor of 0.5 H.P & 3 phase and shall have
30-40 rotating per minute. Machine shall be capable of sealing glass
infusion bottles of various size capacity 100 ml, 375ml,500ml & 1000ml
to be fitted with aluminium seals cap dia 32m.m. depending on neck size
of bottle available at different occasion. Machine shall be provide with
sealing head shall come down automatically to close the cap by spinning
rollers with pressure plunger of change part to suite for caps for sealing.
Two additional sets of rollers shall be supplied extra with machine.
QTY.
01
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
144
SUB GROUP NO.25 (E)
PURCHASE OF ‘M&S’ (CONSUMABLES) ITEMS---CENTRAL STORE
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
SANITATION ITEMS:
SR.
NAME OF ITEM
1
(a)Simple soap as Nirma Bath , Pamolive Lifebuoy, simple OK etc.
150gms. or 120gms Each
(b) Soap with Glycerine as LUX, HAMAM, NIRMA BEAUTY,
CENTHOL, GODREJ, DETTOL, SEVLON---100 gms. each
Phool Broom plastic handle wt. 400gms
Wiper with Handle st. size superior qty.
Cleaning Powder (Vim)
Broom Naryal 500gm (weight)
Liquid Soap
Bamboo Broom
2
3
4
5
6
7
QTY.(NOS.)
10800
22800
1200
300
1800
1800
1850
50 kgs.
MISCELLANEOUS ITEMS:
SR.
NAME OF ITEM
1
2
3
4
5
6
7
8
9
10
Plastic finit pump 250ml cap.
Bamboo 6 feet long superior quality
Torch 2 cell (Eveready / Jeep)
Torch 3 cell (Eveready / Jeep)
Acid Bottle 500ml
Floor Brush with Bamboo 6 feet long
Jala Brush
Remote Cell
Fly Flapper
Wheel Barrow : Capacity 150 Ltrs. With Lid --superior quality Plastic
made
Bio-medical waster dustbin having stand and two wheel—Capacity 100
Ltrs. (Black, Yellow, Red, Blue coloured)
Plastic bucket with handle ---Capacity 25 Ltrs.
Plastic mug 750 ml
Plastic Tub full size capacity 100 Ltrs.—superior quality
Instrument Sterlizer (Medium size) with cord and plug.
Patient Food Trolley SS of 3041 36”x31”x21” (HxLxW) Circle-5 for
keeping buckets
11
12
13
14
15
16
QTY.(NOS.)
300
100
150
100
720
200
240
150
400
50
50
100
100
100
20
05
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
145
SUB GROUP NO.25 (F)
PURCHASE OF ‘M&S’ ITEMS—SKIN & VD
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of
Finance University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak
(Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires the samples to check the quality before comparison of rates,
the same will have to be supplied at the earliest.
SR.
NAME OF ITEM
QTY.(NOS.)
1
02 bottles of 60 ml each
2
Jessner’s solution-14% salicylic acid + 14% Lactic acid + 14%
resorcinol in ethanol
30%Salicyclic acid
3
35% Glycolic acid peel
2 bottle of 60 ml each
4
15% Trichloracetic acid peel
4 bottles
5
Mandelic acid peel (50%)
2 bottles
2 bottle of 60 ml each
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
146
SUB GROUP NO.25 (G)
PURCHASE OF ‘M&S’ ITEMS—BOILER SECTION
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.2,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Cost of tender form
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
SR.
NAME OF ITEM
QTY.(NOS.)
1.
Scale preventing chemical liquid
520 kgs.
2.
Descaling chemical
300 kgs.
NOTE; The tenderers are required to submit the sample at the time of submission of
their offer.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
147
SUB GROUP NO. 25 (H)
PURCHASE OF ‘M&S’ ITEMS---MICROBIOLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the
same will have to be supplied at the earliest.
Sr.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Name of Antimicrobial Disk
HI-MEDIA Laboratories private limited, Mumbai
Cefdinir
Amoxyclav
Ticarcillin+Clavulinic acid
Cefepime
Aztreonam
Nitrofurantoin
Cotrimoxazole
Ceftizoxime
Netilmicin
Ciprofloxacin
Meropenem
Imipenem
Ceftazidime
Doxycycline
Cephalexin
Linezolid
Norfloxacin
Piperacillin+Tazobactam
Amikacin
Teicoplanin
Cefoxitin
Polymyxin B
Erythromycin
Gentamicin
Clindamycin
Penilcillin
Cefixime + clavulinic acid
Cefepime + tazobactam
Cefoperazone + sulbactam
Vancomycin
Code
Quantity
SD218
SD063
SD201
SD219
SD212
SD023
SD010
SD110
SD046
SD060
SD727
SD073
SD062
SD012
SD048
SD215
SD057
SD210
SD035
SD213
SD041
SD029
SD013
SD016
SD051
SD028
SD 266
SD 257
SD 203
SD 045
12 x 5vl
20 x 5vl
05 x 5vl
20 x 5vl
12 x 5vl
20 x 5vl
20 x 5vl
20 x 5vl
12 x 5vl
20 x 5vl
20 x 5vl
20 x 5vl
20 x 5vl
20 x 5vl
12 x 5vl
12 x 5vl
20 x 5vl
20 x 5vl
20 x 5vl
12 x 5vl
12 x 5vl
12 x 5vl
12 x 5vl
12 x 5vl
12 x 5vl
20 x 5vl
10 x 5vl
10 x 5vl
10 x 5vl
10 x 5vl
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
148
SUB GROUP NO. 25 (I)
PURCHASE OF ‘M&E’ ITEMS—SKIN & VD DEPTT.
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the
same will have to be supplied at the earliest.
Sr.
Name of items with specifications
Qty.(Nos.)
1
WHOLE BODY NARROW BAND ULTRAVIOLET-B PHOTOTHERAPY UNIT:
NBUVB Whole body phototherapy chamber with 16 tubes-TL100/01
With inbuilt multisensory
Dosimetry with dose card
Talking unit and other features
Must include imported Aluminium
Mirror type reflector alongwith cooling fan
Open top
Cumulative hour meter and other safety measures
Microdermabrasion crystal free with diamond tip
Voltage: AC 100V-240V, 47-63 Hz
Power: 150 W
Tech: vacuum
Vacuum pressure: 70 KPa
Tips: 12 pieces hydro tips and 9 diamond tips
Handle: 1 pcs diamond handle, 1 pcs hydro handle
Package size: 46*42*29 cm( 1 unit/ box)
MOQ: 1 pcs
Wood’s lamp(portable)
4 UV bulbs- approx 5000 hours
3 diopters magnifying lens
Colour charts
Light blocking drape
90” Electric Cord for convenient use
110 volts
Dermascope
Image sensor :2.0 mega pixels
Video capture resolution: 1600x1200,1280x1024,640x680,320x240
Still image capture resolution: 1600x1200,1280x1024,640x680,320x240
Color: 24 bit RGB
Lens: microscope lens: Dual axis 27x and 100x
Focus range: manual focus from 10 mm tolnfinity
Flicker frequency: 50 Hz/60 Hz
Frame rate brightness: max 30 f/s under 600 Lus
Magnification ratio: 10x to 200x
Shutter speed : 1 sec to 1/1000 sec
Video format: AVI format
White balance : auto
Exposure : auto
Light source( adjustable): 6 LED white lights
PC interface: mini USB 2.0
Operation system : windows 2000/ XP/ Vista
OSD language : English
Power supply: 5V DC from USB port
Size: 110 mm (L)x33 mm(R)
1
2
3
4.
1
1
1
..2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
149
5.
6.
7.
8
9
10
11
12
-2
Electrocautery machine offering instant electrocoagulation, electrodessication(cutting
mode), electrofulgration
Electrocautery(220-240 volts)
Mode: Cut, Cut & Coag, Coag, fulguration, bipolar
Output voltage: variable from 500 to 600 ±20%
Output power: 0 -100 W
Output frequency: monopolar mode- 4.00 mega Hz
Bipolar mode – 1.71 mega Hz
Mode and output waveform: cut( fully filtered)
Cut& coag( fully rectified)
Coag( partially rectified)
Fulguration( spark- gap)
bipolar
Liquid nitrogen cryogen
Liquid nitrogen cryo with liquid nitrogen storage tank with accessories
Patch Test Antigen
1-Indian Standard Battery(25 Antigens- 5ml each antigen2-Aluminium chambers pre
fixed on micropore tape
Patient examination Halogen light without magnifying lens (Floor model)
Patient examination light with magnifying lens (Floor model:
--Magnification 25x (approx.)
--Power-25 W (minimum)
Derma Chair:
• Easy styling with multi position couch .
• Motor and remote control operated.
• Power 230 V 50 Hz.
• Minimum size 2000 x 650 x 700.
• Suitable for all dermatological procedures.
Biopsy Disposable Punches:
• 1.5 mm
• 2.0 mm
• 2.5 mm
• 3.0 mm
Digital Iontophoresis with
--Digital display.
--Feathre touch control.
1
1
1 Kit
02
02
02
10
25
25
25
01
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
150
SUB GROUP NO. 25 (J)
URGENT PURCHASE OF CEILING FANS—CENTRAL STORE
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of
Finance University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak
(Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the
same will have to be supplied at the earliest.
Sr.
Name of items with specifications
Qty.(Nos.)
1.
Ceiling fan 1400 mm without regulator and without rod
300
2.
Ceiling fan 1200 mm without regulator and with rod
200
3.
Ceiling fan down rod 60 mm long ISI marked
150
Make: USHA, ORIENT, KHAITAN, POLAR, BAJAJ, CROMPTON GREAVES / ISI marked
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
151
SUB GROUP NO. 25 (k)
SALE OF BROKEN CARD BOARD BOXES (GATTA) WASTE MIXED GLASS—
CENTRAL STORE
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of
Finance University of Health Sciences Rohtak.
Earnest Money
1. FOR WASTE MIXED GLASS:
Rs.10,000/- in shape of Call Deposit Receipt in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India.
2. FOR BROKEN CARD BOAD BOXES( GATTA):
Rs.2,000/- in shape of Call Deposit Receipt in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India.
3. FOR WASTE PLASTIC:
Rs.3,000/- in shape of Call Deposit Receipt in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India.
DETAILS OF ITEMS FOR SALE:
Sr. Name of Items
Approx. quantity (per month)
1.
Waste Mixed Glass
1000 kgs.
2.
Broken card board boxes (Gatta)
100 kgs
3.
Waste Plastic
50 kgs.
TERMS & CONDITIONS:–
1. The waste White Broken Glass and Broken Card Board Boxes (Gatta) with waste plastic will be uplifted once in
a month or earliest as required from the Glucose department & other departments of the Institute.
2. The rates are valid for one year from the date of opening of tender.
3. The items shell be lifted from the sight on ‘As and where’ basis.
4. The Loading – Unloading into the truck shall have to be arranged by the contractor at his own expences.
5. Weighing charges on “Dharam Kanta “ will have to be borne by the Contractor.
6. Payment of goods will have to be deposited with the cashier of this institution on the same day, through the Head
of the concerened department of this Institute.
7. The successful contractor (highest bidder) will have to furnish an Agreement Bond of the proper value on nonjudicial stamp paper duly attested by the first class Magistrate within a week from the date of acceptance letter.
8. You will have to comply with all the instruction/ orders issued by the Director, Pt. B.D. Sharma PGIMS., Rohtak
from time to time.
9. The sale tax / income tax if any livable on the items will be borne by the Contractor and before the material is
lifted sale tax / income tax has to be deposited by the contractor to the sale tax department. Further if he fails to
do so and the goods were seized by sale tax / income tax office then the contractor shall be responsible to pay the
penalty and any other offence committed action taken against the contractor.
10. The Security money should be submitted as per amount of Earnest Money within a week from the issuance
of acceptance rates of this tender and the Security amount should be deposited in the shape of CDR/FDR in
favour of the Controller of Finance University of Health Sciences Rohtak.
Sd/-
Sr. Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
152
SUB GROUP NO. 25 (L)
PURCHASE OF ‘M&E’ ITEMS—STATE INSTITUTE OF MENTAL HEALTH
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires the samples to check the quality before comparison of rates, the
same will have to be supplied at the earliest.
Sr.
Name of items with specifications
Qty.(Nos.)
1.
AUTOMATIC HAEMATOLOGY ANALYZER WITH 3-PART DIFFERENTIAL
BLOOD CELL COUNT:
Specifications:
• To work in variable ambient conditions.
• Provision for automatic sample loading, mixing and testing.
• Minimum parameters 20 including Histograms for RBC, WBC & Platelets.
• Touch Screen LCD display, rapid print out, through put- minimum 60/Hr.
• Precision coefficient variation, maximum 5% for platelet count and upto 3% for other
parameters.
• Calibration automatic and manual.
• Specifically designed mechanism for easy trouble free maintenance including cleaning
of apertures, tube systems and calibration.
• Random access for individual sample.
• Suitable printer.
• Computerized data manager for minimum 10000 samples including their details fitted
with latest hardware and software.
• Suitable UPS for atleast one hour back up.
• Warranty: atleast three years.
• CAMC: Atleast for seven years after warranty.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
153
SUB GROUP NO.25 (M)
RATE CONTRACT FOR PURCHASE CHEMICALS FOR THE YEAR 2014-15 ---PATHOLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of Controller of Finance Pt.B.D.Sharma
University of Health Sciences Rohtak (Haryana) India
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
SR.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
NAME OF ITEMS
(Make:Rankem/CDH/Qualigens/ Sigma/BDH/ Merck / Across)
Alcian Blue stain Powder
Aluminium Pottasium Sulphate Powder
Acetic Acid Glacial
Ammonia Solution
Ammonium Sulphate
Basic Fuchsin Powder
Citric Acid Monohydrate
Calcium Chloride
Chloroform
DPX Mountant
Dextrose Anhydrous
Disodium hydrogen Phosphate AR
EDTA
Eosin Yellow
Egg Albumin flakes
Formalin
Formic Acid (98 to 100%) AR
Glycerol
Haematoxylin powder
Hydrogen Peroxide 30%
Isopropyl Alcohol
Lab. Wash
Leishman stain solution
Methylene Blue stain powder
Nitric Acid AR
Oxalic Acid powder
Potassium Ferrocyanide Powder (Extra pure)
Rubeanic Acid
Sodium Iodate
Sodium Chloride AR
Sodium dihydrogen phosphate AR
Trishydroxy methylamine
Tri Sodium Citrate
Toludine blue stain powder
Complete range of ready to use stain solutions for Papanicolaou’s
stain broadly inclusive of Haematoxylin, orange and polychrome
with each solution of maximum upto 1 Ltr. Packing. Shelf life
should be at least one year (Merck / BDH / Sigma
Calcium Carbonate
Brilliant Cresyl Blue for Reticulocyte Count
(Sigma / Merck / BDH / Across)
New Methylene Blue for Reticulocyte Count
(Sigma / Merck / BDH / Across)
Auramine and Rhodamine ready to use Solution for Mycobacteria
MAXIMUM PACK
SIZE
25gm.
500 gm
500 ml
500 ml
500 gm
25 gm
500 gm
500 gm
25 Ltr.
500 ml
500 gm
500 gm
100 gm
25 gm
500 gm
05 Ltr.
500 ml
500 ml
25 gm
500 ml
25 Ltr.
05 Ltr
01 Ltr.
25 gm
500 ml
500 gm
500 gm
25 gm
25 gm
500 gm
500 gm
500 gm
500 gm
25 gm
QTY.
AS PER
REQUIREMENT
As per supplier’s
pack for constituent
reagents
500 gms.
25 gm.
25 gm.
500 ml
NOTE: The Rate Contract shall be valid for 2 years.
Sd/-
Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
154
SUB GROUP NO.25 (N)
RATE CONTRACT FOR PURCHASE OF IHC & DIF MARKERS.
FOR THE YEAR 2014-15 ---PATHOLOGY
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of Controller of Finance Pt.B.D.Sharma
University of Health Sciences Rohtak (Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SUB GROUP: (i) IMMUNOHISTOCHEMISTRY MARKERS
(storable at standard refrigeration conditions (not below 4 Deg. C):
SR.
NAME OF ITEMS/ MARKER SPECIFICATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ATPase Ph 4.6/4.3
Dystrophin C,N,L Domain
NADH
Cytochrome C oxide
Merosin
Myelin
-Sarcoglycogan
Myosin – Heavy Chain
Ubiquitin
CD 41
Acetyl choline esterase
MAXIMUM
PACK SIZE
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
QTY.
AS PER
REQUIREMENT
Markers other than ER,PR, Vimentin, EMA, Desmin, GFAP, Ki-67, Bcl-2,
Caleritin, CD15, CD68, NSE, Synptophysin, CD3, CD 5, CD 20, CD 45, CD 138,
Cyclin D1, Inhibin, Myogenin, TDT, SMA, CD 30, CD34, S-100, Chromogranin,
P-53, TTF-1, P-63, Glycophorin A, CD-41, CK-AE 1/AE3, CK-7, CK 20, £ - Feto
Protein, HCG Beta, Calcitonin, CEA, CD 56, CD 117 (C-Kit), CD 10, Her-2 neu(Cerb B-20 neoprotein), PSA, KAPPA Light Chain, LAMBDA Light Chain, PLAP,
CD 33, CD 99, HMB-45, Factor VIII (VWF), Myloperirodase, Myoglobin, Hep.
Core Antigen, Mast cell tryptase, CD 31, CD 246, Bcl-6, Hepatocyte GFR, MUMI
Protein, Epithelial Antigen Ber-ep-4, AMACR, CD 1a, CD35, EGFR, Melan A,
MUC-4, Thyroglobin,
CK (HMW).
SUB GROUP: (ii) IMMUNOFLUOROSCENT DYES
(Anti human antibodies tagged to FITC)
SR.
NAME OF ITEMS
1.
2.
3.
4.
5.
6.
7.
C1q
C3c
C4d
Albumin
Kappa Chain
Lambda Chain
Other dyes excepting IgG, IgM, IgA, Fibrinogen and C3
MAXIMUM
PACK SIZE
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
15 ml
QTY.
AS PER
REQUIREMENT
TERM & CONDITIONS:
1.
2.
3.
The vendor will have to standardize staining protocol in the laboratory.
The reagents must include the cost of and supplied with the diluent antigen retrival reagents if heat reterival is not
recommended as per staining protocol.
The Rate Contract shall be valid for 2 years.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
155
SUB GROUP NO.25 (O)
PURCHASE OF PRINTED ENVELOPS FOR CHIEF MINISTER FREE TREATMENT PLAN
FOR PGIMS ROHTAK
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of Controller of Finance Pt.B.D.Sharma
University of Health Sciences Rohtak (Haryana) India.
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
NAME OF ITEMS
1.
Printed Envelops (as per sample given below)
QTY.
268000 Nos.
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
156
SUB GROUP NO.25 (P)
PURCHASE OF “M&E’ ITEMS----NEPHROLOGY
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR in favour of Controller of Finance Pt.B.D.Sharma
University of Health Sciences Rohtak (Haryana) India.
NOTE: In case Indenting deptt. desires, the samples to check the quality before
comparison of rates, the same will have to be supplied at the earliest.
SR.
NAME OF ITEMS
1.
INFUSION PUMP (SYRINGE):
Specifications:
• PCA upgradeable syringe pump accepting 10, 20, 30, 50 ml syringes of known
brands as well as CUSTOM programmable syringe with facility for time locked
BOLUS?PCA facility & administration counter and display for the same.
Minimum six stage programming of target time and target volume,
Programmable rate KVO (keep vein open), LED display of flow rate & LCD
display of drug name with multiprogramming facility, infused volume infusion
time simultaneously, facility to change flow rates in Run condition. (Flow rate
0.1 ml/hour to 999 ml/hour.
• Portable, rechargeable battery life minimum for 2 years.
• Battery back-up for 1 hour.
QTY.(Nos.)
08
NOTE:
•
•
•
•
•
•
The equipment should operate independently on mains (220-240 V) as well
as batteries. Minimum battery life should be 2 years.
The instruction manual and service manual are part of equipment and shall
be provided along with.
Warranty for 2 years from the date of satisfactory installation.
AMC for 5 years beyond warranty period must be included in the invoice
with details of terms and conditions of repair and payments.
Demonstration of the equipment may require.
Stabilizer if require may be provided along with.
SPECIFICATION ARE GENBERALISED IN NATURE
2.
DEFIBRILLATER WITH ECG MONITOR:
UNSPSC Code: 42172101
ECRI Code: 17-116
03
1 Description of Function
SI name
Defibrillator is required for reviving the heart function by providing selected
quantum of electrical shocks with facility for monitoring vital parameters.
2. Operational Requirements
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Defibrillator should be Bi-Phasic, light weight and latest model
Should monitor vital parameters and display them
Should print the ECG on thermal recorders.
Should work on Manual and Automated external defibrillation
(AED) mode. Manual selection up to 270 J.
Should be capable of doing synchronized & asynchronized
cardioversion
Can be operated from mains as well as battery
Should have defibrillator testing facility
Demonstration of the equipment is a must
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
157
3. Technical Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Should be a Low Energy Biphasic defibrillator monitor with Recorder, having capability to
arrest all arrhythmia within a maximum energy of 360 joules.
Should monitor ECG through paddles. Pads and monitoring electrodes and Defibrillate through
pads and paddles. Should have Automatic Lead switching to see patient ECG through paddles
or leads
Should measure and compensate for chest impedance for a range of 25 to 150 ohms.
Should have a built in 50mm strip printer/thermal recorder
Should have charging time of less than 3 seconds for maximum energy. Charging indicator
should be there.
Should have bright electroluminescent display for viewing messages and ECG waveform of 4
seconds
Should have external & internal facility for recording and prionting at least 250 events and 50
waveforms.
Should have event summary facility for recording and printing at least 250 events and 50
waveforms.
Should have a battery capable if usage for at least 90 minutes or 30 discharges.
Should be capable of printing Reports on Event summary, configuration, self test, battery
capacity etc
Should have facility for self test/check and set up function.
Should have SPO2 and NIBP integrated facility
Should be capable of delivering energy in increments of 1-2 joules up to 30j and increments of
maximum 50j. thereafter.
Should have user friendly 1,2,3 colorcoded operation.
4. System Configuration Accessories, spares and consumables
• Defibrillator -01
• Paddles Adult/Paediatric (pair) –01
• Paddles – Internal (pair) - 01
• Patient cable – 02
• ECG Rolls – 50
• Disposable pads – 10nos.
• NIBP Cuff Adult – 02
• NIBP Cuff Paediatrics – 02
• Reusable SPO2 Finger Probe-Adult – 02
• Reusable SPO2 Paediatric Finger Probe – 02
• Completer set of ECG Leads – 02
5. Environmental factors:
5.1
The unit shall be xcapable of operating continuously in ambient
temperature of 10-40 C and relative humidity of 15-90%
5.2
The unit shall be capable of being stored continuously in ambient
temperature of 0-50 C and relative humidity of 15-90%
5.3
Shall meet IEC-60601-1-2:2001 (Or Equivalent BIS) General Requirements
of Safety for Electromagnetic compatibility.
6. Power Supply:
6.1
Power input to be 220-240VAC, 50Hz
6.2
Resettable overcurrent breaker shall be fitted for protection
7. Standards, Safety and Training:
•
•
•
•
•
•
•
•
•
•
•
Should be FDA or CE approved product
Electrical safety conforms to standards for electrical safety IEC-60601-1 General
Requirements and IEC-60601-2-25 Safety of Electrocardiograms. (OR
EQUIVALENT BIS Standard)
Drop Test-Withstands 1 meter drop to any edge, corner or surface.
Should conform to international test protocols on exposure to shock forces and to
vibration forces. The standard should be documented.
Should meet IEC 529 Level-2 (IP2X) for enclosure protection solid foreign object
ingress.
Should meet IEC 529 level 3 (IP3X) (spraying water) for enclosure protection, water
ingress.
Should have local service facility. The service provider should have the necessary
equipments recommended by the manufacturer to carry out preventive maintenance test as
per guidelines provided in the service/maintenance manual.
Comprehensive warranty for 5 years and provision of AMC for next 5 years.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
158
8. Documentation:
User manual in English
Service manual in English
List of important spare parts and accessories with their part number and costing
Certificate of calibration and inspection from factory.
Log book with instruction for daily, weekly, monthly and quarterly maintenance checklist. The job
description of the hospital technician and company service engineer should be clearly spelt out.
• List of Equipments available for providing calibration and routine maintenance support as per
manufacturer documentation in service/technical manual.
• Compliance Report to be submitted in a tabulated and point wise manner clearly mentioning the
page/para number of original catalogue/data sheet. Any point, if not substantiated with authenticated
catalogue/manual, will not be considered.
• Must submit user list and performance report within last 5 years from major hospitals.
•
•
•
•
•
3.
ELECTRONIC WEIGHING MACHINE ADULT:
Technical specifications:
•
•
•
•
•
•
•
•
•
02
Digital weighing scale
Range 0-200kg Minimum
Accuracy: + 5 grams
Display: bright up to 3 decimal points
Units: in grams/kg
Standing platform for patients—Stainless Steel
Easily cleaned and disinfected
Should be able to stabilize the readings in spite of movements
Memory: up to 10 readings
System Configuration Accessories, spares and consumables:
•
•
System as specifiedAll consumables required for installation and standardization of system to be given free of
cost.
Environmental factors:
•
•
The unit shall be capable of being stored continuously in ambient temperature of 0-50deg
C and relative humidity of 15-90%
The unit shall be capable of operating continuously in ambient temperature of 10-40deg c
and relative humidity of 15-90%
Power Supply
•
Power Supply: 220/240V 50/60 Hz with DC adaptor. Capable of running on battery
Standards, Safety and Training:
•
•
•
•
Should be FDA, CE, UL or BIS approved product
Manufacturer/Supplier should have ISO certification for quality standards.
Shall comply with electrical safety requirements as per IEC or BIS regulations.
Comprehensive warranty for 2 years and 5 years CMC after warranty
Documentations to be provided:
•
•
•
•
•
•
•
User/Technical/Maintenance manuals to be supplied in English.
Certificate of calibration and inspection.
List of Equipments available for providing calibration and routine Preventive
Maintenance support as per manufacturer documentation in service/technical manual.
List of important spare parts and accessories with their part number and costing.
Log book with instruction for daily, weekly, monthly and quarterly maintenance
checklist.
The job description of the hospital technician and company service engineer should be
clearly spelt out
SPECIFICATIONS ARE GENERALISED IN NATURE
4.
MULTI CHANNEL ECG MACHINE (3 CHANNEL):
02
Specifications:
It should be a 3/6/12 lead automatic interpretive electrocardiograph recorder with LCD
display. It should be mains operated with provision of built in rechargeable batteries and
completer alphanumeric keyboard with following specifications:
•
•
•
•
•
•
Computer controlled thermal dot array printer
Writing speed 5050 mm/sec
Sensitivity 0.5-2 mv/5-20mm
Report formats: 12 lead and user selectable format
Common mode rejection ratio: 100 dB or more
Patient safety: current leakage less than 10 uamp
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
159
•
•
•
Recording paper: thermal sensitive, Grid paper
Should have interface for PC compatible software with capability to store upto 100 EKGs.
Alarms/alert for lead disconnection
Standard Accessories include:
• 10 lead patient cable with banana plugs, clip and chest electrodes.
• Built-in rechargeable battery lasting for > 2 hours, after full charge
• Power cord (10 feet)
• Suitable CART/Trolley to be quoted as part of offer
Two extra patient cables to be quoted as part of EKG machine. 10 packets of
compatible EKG paper to be supplied along with each machine
PRINTER: Digital Array Printer at a speed of 25 and 50mm/sec
PAPER:
Thermal paper preferably A4 with Grid (commercially available in India)
REPORT(ANNOTATED):
•
•
Basal 12 lead EKG with interpretation. Other formats 3x4, 6x2 formats.
Averaged 12 lead EKG complexes of resting EKG preferable Rhythm lead (upto
12 leads)
NOTE:
1. Service contract ( both AMC/CMC) for 5 years with details of terms and
conditions of repair and payments must be submitted (after expiry of 2 years
warranty). Battery should also be under warranty for 2 years.
2. Service manual, operation manual are essential.
3. These are minimum specifications and offer with additional or higher specifications shall
also be considered. Demonstration of EKG machine is mandatort.
4. Warranty period for two years after satisfactory installation shall include patient cable
batteries.
5. Third party inspection of goods (imported items) at the time of dispatch shall be to the
charge of supplying firm.
Specification quoted are of generalized nature.
Sd/-
Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
160
SUB GROUP NO.25 (Q)
RATE CONTRACT FOR PURCHASE OF ‘M&S’ (CONSUMABLES) ITEMS
---CENTRAL STORE
Cost of tender form
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance University
of Health Sciences Rohtak.
Rs.5,000/- in shape of CDR/FDR
in favour of the Controller of Finance
Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
Earnest money
NOTE: In case Indenting deptt. desires, the samples to check the quality before comparison of rates, the same
will have to be supplied at the earliest.
DRESSING GOODS:
SR.
NAME OF ITEM
1.
2.
Lint cloth (packet of 500 gms. Each) ISI
Plastic tape polythene transparent quoted with Hypoallergenic Adhesive
(Make: 3 m, Micropore, Kenpore, Shellpore, Romopore, Romson, EMAid Udaipur make)
Size ½ x 9.14 Metres
QTY. (NOS.)
AS PER
REQUIREMENT
SURGICAL GOODS:
SR.
NAME OF ITEM
1.
2.
Insuline Syringe with needle IS/CE/FDA approved
Ryle’s tube IS/CE/FDA approved : Size 8, 10, 12,14,16 & 18 FG
- with radio opaque line, multiple metal sole in fused rounded end with
multiple holes.
- The length of tube should be minimum 120 cm ± 5 cm
3.
Skin grafting blade—Gamma/ETO, sterilized double pack
IS/CE/FDA approved
Swan Gauge Catheter
Tuberculin syringe with needle -- IS/CE/FDA approved
4.
5.
6.
QTY.(NOS.)
SCALP VEIN SET:
Thin wall sharp needle should be non-toxic and with super smooth finish and nonkinkable, siliconized tubing attached to butterfly flanges.
•
Each gauge needle is fitted on butterfly as per international colour code.
•
Provide with luer mount which fits with all male mounts.
•
Packed in peel off type Blister pack
•
Tubing length be not less than 25+5 cms and should be packed in straight packing
not in spiral.
•
Mfg and expiry date should be mentioned
•
Pre sterilized Ready for use.
Size: 20 G
•
7.
AS PER
REQUIREMENT
ABDOMINAL DRAIN KIT:
consisting (a) Soft Drainage Catheter (b) Collecting bag. It should be pyrogen free and
presterilized Gamma ETO( ISO/CE/ISI).
8.
9.
Size 30FG
Malecot Catheter Presterilized Indina Rubber Size: 30 and 32
Ureteric Catheter with Steellate preseterilized double pack
Gamma/ETO
Size 5 F and 6F
…2.
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
161
-2-
10.
TRACHEOSTOMY TUBE WITH CUFF (IS-12505 PART I
& II) (IS-8432)/CE:
•
•
•
•
•
•
•
•
•
•
Non toxic, implantation tested (preferable) Medical grade, PVC
With a ratio opaque line
Cuff thin smooth, soft, non hernia ting, low pressure type and bonded to the tube.
Cuff inflation and deflation through a one-way walve management with a pilot
balloon.
Cuff should be low pressure profile.
Distal end should have a 15mm termination for connection to a standard circuit
mount.
Patient end of the tube rounded and smooth.
Single use/pre sterilized/sterile
Should have a flange at the distal end with holes.
Provide both tapes for securing at the neck
Size: 8
11.
ENDOTRACHEAL TUBES WITH CUFF: (IS/ISO/CE)
(SINGLE-USE/PRESTERILIZED)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Siliconised PVC non toxic to tissues.
Implantation tested preferable(enclose certificate)
Thermo-sensitive to adapt to tracheal anatomy.
Non kinkable
Bevel with Murphy eye.
Radiopaque line to detect the correct position
Should adopt universal connector of 15 mm and compatible with all circuit
Cuff should be bonded, non-herniating.
Size range from 5.0 to 11 mm in 0.5 mm increments.
Inflation tube attached with a one way valve for inflation or deflation of cuff with
a pilot ballon and it should be on the concave aspect of the tube.
Free end of inflating tube shall be filled with a plug valve and is able to adopt a
syringe nozzle/luer lock. Depth marker at the proximal cuff end, 3 cm from the
cuff.
Cuff/smooth.
Non Traumatic
Low Pressure
Residual volume of cuff/nil or minimum.
Bevel Angle of bevel of 38±—10
Opening facing to left.
End of the bevel rounded.
Dimensions : Size-6.5 to 11 mm
Max..Length- 140 to 320 mm
Max. distance from the patient end to the machine end of the cuff – 56 to 85 mm
marking on the tube:
General requirements should be specified like nasal/oral size: 6.0 or smaller, the
outside diameter should be marked in mm. Internal diameter as ID and outside
diameter as OD.
Size 5mm and 6mm
12.
13.
14.
L.P. Needle
Size 20G, 25G
Close Suction Catheter
Binasal Prongs (Infant, Neonatal Child and Adult
LAUNDRY ITEMS:
SR.
NAME OF ITEM
1
2
3
4.
Washing powder Nirma, Wheel, Nikhar, Sasa etc.
Surf Excel, Quick Wash, Tide, Wheel
Neel Powder Ujala, Robin
Ezee
QTY.(NOS.)
AS PER
REQUIREMENT
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
162
SUB GROUP NO.25 (R)
RATE CONTRACT FOR THE PURCHASE OF STATIONERY ITEMS
---CENTRAL STORE
Cost of tender form
Earnest money
Rs.1,000/- in shape of Demand Draft payable to the Controller of Finance
University of Health Sciences Rohtak.
Rs.20,000/- in shape of Call Deposit Receipt in favour of the Controller of
Finance Pt.B.D.Sharma University of Health Sciences Rohtak (Haryana) India
NOTE: In case Intending deptt. desires, the samples to check the quality before comparison
of rates then the same will have to be supplied at the earliest by the tenderer
concerned.
SR.
NAME OF THE ITEMS
1.
PHOTOSTAT PAPER SIZE A-4 (210X297 MM)
MAKE: CENTURY, MODI, IMAGE COPIER, HPC, JK RED, TNPL
QTY
AS PER
REQUIREMENT
Sd/Sr.Professor I/c Purchase
CORRIGENDUM DT.08.05.2013 TO SHORT TERM TENDER NOTICE NO.11/2013-14
163