Download PS PROGRAMMER

SERIE 905-ZA
ENG - 29
SERIES 905 - ZA
Modular amplification equipment, selective and programmable, for
terrestrial digital and analogue TV. Each ZA-411 module consists of two
independent filters which can be programmed as monochannel or
multichannel.
Each processor module, ZA-431 (UHF) or ZA-331(VHF), consists of a
superselective monochannel filter (FOS).
1.
SAFETY INSTRUCTIONS
Make all the RF and power connections before connecting the equipment to
the electric mains.
To comply with safety standards, the electrical installation must be protected
with a differential circuit breaker.
Fig. 1 - Earthing the equipment
Do not remove the covers of
the equipment while it is still
connected to the mains supply.
All repairs must be performed
by
authorised
technical
personnel. Internal manipulation of the equipment annuls
all guarantees.
230 V
Fig. 2 - Do not manipulate while connected
Ensure that the equipment is properly ventilated. If it is to
be installed in a cabinet, use the cabinet CP-126 (code
9050124). Any equipment working beyond its
+ 45 °C temperature range (-10°C to +45°C) may be damaged
irretrievably. Do not block or cover the ventilation slots of
- 10 °C the power supply unit or of the cabinet.
Fig. 3 - Temperature range