Download Validator-NTf Network/Cabling Certifier User's Guide

JDSU NT955 Series
Validator-NTTM Network Tests
To view Cisco Delivery Protocol broadcast messages
1. From the Start Menu, select Network Tests. Select Cisco
Delivery Protocol.
2. Use a patch cable to connect the Validator-NT main unit to the
network or device port to be monitored for CDP.
3. CDP information automatically displays and a message “Reading
CDP packets from network” appears on your screen below the
CDP message.
CDP Display Screen
Untitled1.job
100%
2006 Jul 05 Test-Um Inc.
10:53:01
validator
Port (Our Port): eth0
Device-ID: cisco_3524
Device addresses:
IP address: 192.168.1.252
Holdtime: 179 sec
Capabilities: Transparent_Bridge Switch
Version:
Cisco Internetwork Operating System Software
IOS ™ C3500XL Software (C3500XL-C3H2S-M),
Version 12.05(5)XU, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-3000 by cisco Systems Inc.
Reading CDP Package from Network
BACKSPC
CLEAR
START
STOP
6.15 Reading CDP Package
89