Download Power Drawbar installation manual

POWER DRAWBAR SYSTEM FOR EASY TOOL CHANGE
MOVE THE QUILL ALL THE WAY
TO THE TOP MOST POSITION
AND LOCK IN PLACE
Bearing Cap
6 - 8mm (1/4 - 5/16”)
Thruster
Spring Pin
Drawbar
POSITION THRUSTER APPROXIMATELY
6 - 8mm (1/4 - 5/16”) BELOW THE BEARING
CAP FACE. DRILL A HOLE OF O5mm THRU
THRUSTER AND DRAWBAR.
FIT PUNCH SPRING PIN THROUGH FOR
STATIONARY FUNCTION.
APPLY GREASE TO
DRAWBAR BEFORE
INSTALLATION
(Thruster and Spring Pin are included)
EMS (International) Limited
Unit 7 : Kingsley Business Park : Kibworth Beauchamp : Leicestershire LE8 0LE : England
Tel: +44 (0) 116 279 3035 : Fax: +44 (0) 116 227 1307
e-mail: [email protected] : web: www.ems-i.co.uk