Transcript
ASSEMBLY INSTRUCTIONS MODEL: BE1323C Read this instruction carefully. Refer hardware and furniture parts list for guidance. Make sure all parts are complete, before assembling. Place all wooden furniture part on a clean and flat soft surface to prevent scratched. Refer steps provided as assembling guide. PART LIST DESCRIPTION ITEM A B C D E Backrest Leg Footrest Apron Cushion with Apron QTY ITEM 1 PC 4 PCS 1 PC 1 PC 1 PC 1 2 3 4 5 6 HARDWARE LIST DESCRIPTION JCBC Screw M6 x 25mm JCBC Screw M6 x 40mm JCBC Screw M6 x 45mm 4 PCS 8 PCS 6 PCS Spring Washer M6 x 13mm Flat Washer M6 x 16.5mm Allen Key M4 x 110 A STEP 1 QTY 14 PCS 14 PCS 1 PC B C 5 B 4 2 C D E 6 4x Attach part(B) with part(C). Insert each individual set of hardware as per picture shown. Do not tighten any hardware completely. STEP 3 STEP 2 4 D 5 2 6 4x B 5 4 2 C 6 4x Attach part(B) with part(D). Tighten part(B) with part(D) first, then tighten part(B) with part(C) completely. Insert 6 sets hardware first, then tighten part(A) with part(E) completely after alignment is done. STEP 4 6 4x 1 COMPLETE ASSEMBLY