Download Eden Arbors VA68212 Instructions / Assembly

A S S E M B LY I N S T R U C T I O N S
The Cardiff Planter Box
www.edenarbors.com
16 in
15.75 in
13.75 in
16 in
12 in
15 in
Please read through before starting assembly.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1.
2.
3.
4.
5.
Pre-Assembled Side Wall Panels (2)
Pre-Assembled Front & Back Wall Panels with Posts Connected (2)
Post Caps (4)
Floor Boards (3)
Base Trim (4)
3
1
2
4
5
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Ver 1/Sep 2010
1
The Cardiff Planter Box
STEP ONE
Connect the Front & Back Wall
to the Side Wall Panels
1
Lay out front wall panel on the work surface.
2
1
Insert the side walls into the routed holes on the front wall
panel posts until rails bottom out. Push until the locking tabs
snap into place.
3
Insert the three floor boards into the pre-routed hole.
4
Align and insert the pre-assembled back panel to the side wall
panels. Ensure the bottom slats are also inserted into the prerouted hole. Push until the locking tabs snap into place.
2
4
3
STEP T WO
5
Install Post Caps
5
Install the four Post Caps and Base Trims. Push post caps until the
locking tabs snaps into place.
2
1915 Dove St., Port Huron MI USA 48060
Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286
www.edenarbors.com