Download LG Electronics AXRGALA01 Installation Guide
Transcript
THROUGH - THE - WALL AIR CONDITIONER LOUVERED GRILLE INSTALLATION INSTRUCTIONS How to assemble the louvered grille • Model: AXRGALA01 HARDWARE Louvered grille.....................................................1EA Screw....................................................................4EA 2519/25"(655mm) 1618/25"(425mm) 1513/25" (394mm) SCREW LOUVERED REAR GRILLE SLEEVE DIMENSION INSTALLATION THE LOUVERED GRILLE • To install cover panel on back of sleeve, first remove air conditioner from sleeve. • From the inside of the sleeve, insert louvered grille and fasten with 4 screws. When you install the louvered grille, refer to the louver direction in the below picture. Louver Direction (OUTSIDE) SLLEEVE INSTALLATION VIEW WALL (INSIDE) (TOP VIEW) 3828A20209H INSTRUCCIONES DE INSTALACIÓN DE REJILLAS APERSIANADAS EN AIRE ACONDICIONADO PARA INSTALACIÓN EN PARED Instrucciones de montaje de la rejilla apersianada • Modelo: AXRGALA01 HARDWARE Rejilla apersianada............................................1EA Tornillo................................................................4EA 2519/25"(655mm) 1618/25"(425mm) 1513/25" (394mm) REJILLA TRASERA APERSIANADA TORNILLO DIMENSIONES DE LA FUNDA PARA INSTALACIÓN INSTALACIÓN DE LA REJILLA APERSIANADA • Para instalar el panel de cubierta en la parte trasera de la funda de instalación, antes es necesario extraer el aire acondicionado de la misma. • Desde el interior de la funda de instalación, introducir la rejilla apersianada y fijar mediante 4 tornillos. PRECAUCIÓN Al instalar la rejilla apersianada, consulte el sentido de las persianas en la siguiente imagen. Dirección de las persianas (EXTERIOR) FUNDA VISTA DE LA INSTALACIÓN PARED (INTERIOR) (VISTA SUPERIOR) 3828A20209H
This document in other languages
- español: LG Electronics AXRGALA01