Download Intec K20021 Use and Care Manual

 Insstructtion M
Manual Insulation b
blowing macchine Original La
anguage – EEnglish Intec —
— 3771 Monarch Strreet – unit F, Erie, CO
O 80516 U
USA TT: 303‐833‐6644 Web: www
w.inteccorrp.com Email: info
o@intecco
orp.com TT: 800‐666‐1611 Rev Date: 2
20131224 IInstruction M
Manual | 1
IIntroduc
ction
TThank you fo
or purchasing an Intec in
nsulation sysstem. Since 1977, both professional contractorss and do‐
itt‐yourself eq
quipment ussers have loo
oked to Intec as the induustry leader in the desiggn and manu
ufacture o
of innovative
e portable in
nsulation blo
owing equipm
ment. We taake pride in making you
ur job as easyy and p
profitable ass possible. TThe right sysstem for your needs: Inttec strives to
o provide yoou with the b
best combinaation of porttability, ffunctionalityy, and installation versatility to surpaass your dessired successs. From lighttweight p
polyethylene
e units with removable h
hoppers, to llarger units with increassed productiion rates and
d installation vversatility, alll of our duraable systemss are made tto maximizee your profit generating p
potential. B
Best‐in‐class Customer SService: Totaal ease of usse extends b eyond your initial purch
hase of an In
ntec ssystem to yo
our evolving needs thru tthe entire liffecycle. Botth before and after the ssale service iis important to
o keep you ru
unning at pe
eak operatin
ng capabilitiees. Intec’s teechnical team
m provides installation aassistance in addition to maintenancce suggestioons and trouble‐shootingg support. In
n aaddition to b
blowing machines, Intec produces a range of acccessories thaat will increaase your p
productivity when dense
e packing, daamp spraying, and installling net and
d blow. TThank you fo
or partneringg with Intec.. We apprecciate the connfidence and
d trust you h
have placed in us, aand wish you
u many profit‐generating opportunitties! R
Ray Lavallee P
President, In
ntec
TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 2
TTable of Contentts INTRODUCT
TION ................................................................................................... 1 SSYMBOLS ........................................................................................................... 3 SSAFETY FIRST ....................................................................................................... 3 H
HOW THE SY
YSTEM WOR
RKS ........................................................................................ 4 SSYSTEM SET‐UP: .................................................................................................... 5 SSYSTEM OPEERATION: .............................................................................................. 7 M
MAINTENAN
NCE ..................................................................................................... 9 TTROUBLESHO
OOTING ..............................................................................................10 EELECTRICAL DRAWING ............................................................................................13 M
MAKING A C
CLAIM FOR D
DAMAGE OR
R LOSS .....................................................................14 W
WARRANTY ........................................................................................................15 TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 3
SSymbols SYMBOLL SYM
MBOL MEANING
Dan
nger Warrning Cau
ution In
ndicates an imminently hhazardous siituation, which, if not avvoided, will result in d
w
death or seriious injury.
In
ndicates a po
otentially hazardous situ
uation, which
h, if not avoided, co
ould result in
n death or seerious injuryy. In
ndicates a po
otentially hazardous situ
uation, which
h, if not avoided, may result in m
minor or mooderate inju
ury. SSafety Fiirst Disconn
nect all pow
wer cords prior to wo
orking on tthe equipm
ment. Failu
ure to do sso could re
esult in inju
ury or deatth. Never p
put hands into the ho
opper when machinee is runningg. Never o
operate equipment w
while stand
ding in watter as electtrical shockk may resu
ult. Always use grounded extension cords when opeerating equ
uipment. When w
working with insulatio
on, alwayss wear a long sleeve sshirt, glovees and a haat. Wear go
oggles or ssafety glassses for eye
e protectioon. Wear aa mask for respiratory protection. Keep to
ools and foreign objects out of tthe hoppeer. Never le
eave the m
machine un
nattended during opeeration. Diisconnect aall power tto the machine when un
nattended. Never o
operate the
e equipme
ent with the access panels off, p
possible injury m
may occur. Prior to use, inspe
ect power cord and rremote corrd prior to ensure no damage exists.. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 4
H
How the
e System Works O
OVERVIEW: Cellulose, FFiberglass, orr Stone Woo
ol insulation is loaded into the hopper. The agittator b
breaks‐up an
nd condition
ns the insulattion for prop
per density w
while also sw
weeping the insulation into the aairlock. The airlock transsports the in
nsulation into the airstreeam created
d by the blow
wer system. Insulation is discharged ffrom the airlock, througgh the machiine outlet, and into the hose. The in
nsulation nditioned ass it travels th
hrough the h
hose. is further con
A
An introducttion to key components of the system ffollows: EElectrical Panel: The ele
ectrical pane
el, combined
d with tthe remote ((wired and/o
or wireless), provides o
operation off the machine. H
Hopper: The
e hopper con
ntains the in
nsulation beiing fed into the agitaators. H
Hopper Exte
ension (optio
onal): The e
extension pro
ovides tthe user the ability to plaace more inssulation into
o the h
hopper. It w
will also safely keep hand
ds away from
m the aagitator bar. A
Agitator: Th
he agitator iss located in tthe bottom ssection of thhe hopper. TThe configurration of the agitator enaables high production raates and aappropriate insulation co
onditioning. The agitato
or also transsports the insulation through the sllide gate and
d into the airlock. SSlide Gate: TThe slide gatte is betwee
en the agitator and the aairlock. TThe slide gatte allows the
e user to alte
er the volum
me of insulatiion insulatio
on being sweept into the airlock o
over time. A
An open slide
e gate provid
des the maxximum amouunt of insulattion into thee airlock oveer time; o
often this is tthe case when open blo
owing attics. Closing thee slide gate p
provides more condition
ning to tthe insulation. When the slide gate restricts insulation flow
w into the airrlock the insu
ulation comees into m
more contacct with the aggitator, resu
ulting in incre
eased condi tioning of th
he insulation
n and more aairflow vvs. product fflow ratio. TThe slide gate
e is typicallyy used duringg wall fill applications where the useer d
desired a higgher ratio of air to produ
uct flow to pack the insuulation denseely into wall cavities. A
Airlock: The
e airlock tran
nsfers the inssulation from
m the agitatiion system into the airsttream. Notee insulation do
oes not come into contact with the b
blower. Insuulation is disscharged fro
om the airlocck by w
way of the m
machine outlet into the h
hose. Hose iis not shownn in above diagram; hose is connectted to tthe Machine
e Outlet. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 5
B
Backflow pre
eventer: The backflow p
preventer (o
or one‐way vvalve) is foun
nd in the base of the sysstem and is positioned
d between th
he blower an
nd airlock. TThe backflow
w preventer will keep inssulation from
m fflowing backkwards throu
ugh the airlo
ock and into the blower w
which may h
happen wheen the pressu
ure of p
product in th
he hose is more than thaat of the pre
essure in thee line betweeen the bloweer and airlocck ‐ eexamples incclude (i) hose moving strraight up fro
om machine to a second
d or third sto
ory, or (ii) du
uring ssome dense pack operattion. The back blow preventer proloongs the blower motor’ss life. U
Underside view of FORCE/2 SSet up and Operration SSystem Sett‐Up: SSet system o
on a dry, leve
el surface. 1. Obtain appropriaate protectivve equipmen
nt. endations: d
dust mask, e
eye protecti on, gloves, k
knife a. Recomme
to cut insulation bagss, and a hat.
TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 6
2. Powe
er Connectio
ons: Obtain two 12 gaugge, heavy duuty twist‐lockk powe
er cords (notte: when requiring overr 100 feet peer power corrd, recom
mmendation
n is to use 10
0 gauge in orrder to reduuce the voltaage drop and allow fo
or appropriaate operation
n of motors)). Connect o
one powe
er cord to the blower po
ower receptaacle, and onee to the agittator & airlock power iinlet. Note tthat each po
ower source is required tto be an ind
dependent 1
15 amp (or ggreater) circu
uit. 3. Remo
ote: a. If using th
he wired rem
mote, twist the wired rem
mote plug into the wired re
emote recep
ptacle until itt clicks. Wireed Remote’s pluug
b. If you do not have a w
wired remote and you d o not have a wireless remote, insert the jumper pluug into the wired
d remote recceptable to aallow for opeeration of the system
m by the con
ntrol panel.
Jum
mper plug—usee when desire to control systeem by electricaal pan
nel and do not h
have the wired
d remote conneected as shownn abo
ove.
c.. If you havve a wirelesss remote sysstem i. place the remote selectorr switch in thhe ‘wireless’ setting to ccontrol the syystem byy the wirelesss remote; ii. place the remote selectorr switch in thhe ‘remote ccord’ settingg if you desire to op
perate system with a wirred remote.
4. Attacch 3” hose (ttypically 100
0 feet or morre) to machi ne outlet ussing a hose clamp. Notte: If you deesire to wall ffill, you mayy desire Intecc’s Mach
hine Insert TTube which co
onverts yourr machine’s outlet to 2”;; this is a recom
mmended prrocedure when using celllulose (Intecc’s multi‐redducer hose kit is recommend
ded when usiing fiberglasss). You can now use 2” hhose from your machin
ne’s outlet w
with no need
d to use varioous size hosees and reduccing couplerss. 5. Open
n slide gate &
& place pin in desired op
pening. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 7
em is located
d on a stable
e flat surfacee to maintain even 6. Ensurre your syste
loading and blow
wing. optional Wh
heel Kit will aassist in movving your FO
ORCE/2. a. Tip ‐ The o
en the b. Tip ‐ Some rental custtomers faste
FORCE/2 to a pallet in
n order ease
e loading / unloadingg into a truckk or trailer.
7. Agitator’s Rubber Flap: Yourr FORCE/2 co
omes with a er flap that aattaches to o
one of the agitator padddels. Fasten
n rubbe
the ru
ubber flap to your agita
ator when yo
ou are usingg cellulose. The p
purpose of th
his flap is to swipe the side of the hoopper and preve
ent cellulose
e from bridgiing. Remo
ove the flap when you a
are using fib
berglass or sttonewool; keeping the flap installed wh
hen using fiberglass or sttonewool wiill cause thesse fibrous m
materials to bu
unch up against the agitaator paddle ffastened to the flap cau
using the agittator to jam and circuiit breaker to
o trip. 8. Prior to turning the system ‘o
on’, make su
ure the hoppper is empty. Often timees reducers, power cordss, wired and//or wireless remotes, ho
ose, and varrious other to
ools are left in the hopp
per. Starting the syste
em with thesse items in the hopper ccan cause daamage to thee agitator, th
he airlocck, and to the items left in the hopper. SSystem Operation: 1. Energgize System a. Reset circcuit breakerss for both the Blower annd the Agitattor motors. b. Place elecctrical panel switches for both the bblower and aagitator in th
he ‘ON’ posittion. c.. Ensure the Variable SSpeed Bypasss three posittion toggle sswitch is eith
her in the ‘O
ON’ or ‘OFF’ position. ariable speeed, place thiss bypass switch in the ‘O
OFF’ Note 1: Iff you desire to use the va
position. Then set thee variable sp
peed dial to tthe desired ssetting baseed on desired
d blower speed. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
IInstruction M
Manual | 8
Note 2: Iff you desire m
maximum bllower volum
me and pressure, place th
his bypass sw
witch in the ‘ON’ p
position. Thiss setting pro
ovides for maaximum prooduction ratees. Note 3: Iff this switch is in the cen
nter (or NEUTRAL)) position, th
he blower will not turn oon. Wired 2. Activate System u
using either the wired o
or wireless R
Remote control
ote system. remo
a. Press Starrt Blower bu
utton. The blower will start. b. Press Starrt Agitator b
button. The agitator Wireless
motor willl then start. Electrical Paneel
R
Remote control
Note: This system is designed forr the blowerr to start firsst. The blow
wer has to bee on for e. the agitattor to be able to activate
Tip ‐ TTo obtain maximum blo
ower velocityy and pressuure, place the Variable Speed contro
ol in the ‘OFF’ position. Placing the V
Variable Speeed in the ‘OFFF’ position p
provides mo
ore power to
o your system’s blower when compared to haviing the Variaable Speed ‘O
ON’ and thee Variable Sp
peed ng at 100%. Settin
3. Load Insulation ‐‐‐ Remove paackaging and
d load insulaation. C
Cellulose: SSet bag on edge of hopp
per & remove
e plastic wraapping. C
Caution ‐ Be sure no plasstic goes into
o hopper. FFiberglass orr Stone Woo
ol: 1. Score bag in ½ 2. BBend bag to brreak in 1/2
TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English 3. Place ½ bag on edge o
of hopper with
open end wards operatorr or away from
m operator facing tow
– do not h
have open end
d facing into the hopper. Slice w
wrapper in direction shown to
o allow prroduct to expaand into hoppeer. Caution –– Be sure no pllastic goes into
o hopper.
www
w.inteccorrp.com
IInstruction M
Manual | 9
M
Mainten
nance P
Preventative
e maintenance will provide for manyy years of troouble‐free u
use. C
Cleaning C
Clean the intterior and exxterior of the
e machine w
weekly by wi ping with a rag and/or b
blowing with
h ccompressed air; this will help maintaain the longe
evity of the mechanical components in addition
n to the ssystem’s finish. The macchine has be
een designed
d to work in a dusty environment. H
However, witthout p
periodic cleaaning and maaintenance, the perform
mance of thee machine will decline po
otentially leaading to ffailure. C
Cords YYour 12 gaugge power cords are subject to consid
derable weaar and tear d
during normaal operation
n. Inspect aall cords prio
or to use to e
ensure safe operation. Iff any damagge is observeed, be sure to repair or rreplace b
before operaating the maachine to avo
oid personall injury. Notte: Do not pu
ull on powerr cords whilee p
plugged into
o machine ass damage maay occur. A
Airlock and
d Seals TThe airlock aassembly is o
one of the m
most importaant items to keep in good condition. Foreign objjects in tthe airlock caan cause dam
mage and re
educe the machine’s prooduction. Seal failure is tthe most com
mmon aairlock assem
mbly failure. Seal failure
e prevents th
he airlock froom holding tthe proper p
pressure. Seeal ffailure will re
educe the m
machine’s pro
oduction. A machine wi th seal failure will have air blow outt of the aairlock into tthe hopper, reducing the
e amount off air exiting tthe machinee outlet. It iss recommended to vvisually inspe
ected seals e
each week to
o ensure pro
oper runningg condition. Replace airrlock seals if a cut or ttear is eviden
nt. Airlock sseals should be replaced
d approximattely every 3000 hours of operation, o
or once p
per year. Vissit www.inte
eccorp.com o
or contact In
ntec for repllacement insstructions. G
Gearbox It is recommended to ch
hange the ge
earbox oil on
nce per year.. When chan
nging the oil be sure to use the ccorrect lubricant. In ope
erating temp
peratures be
etween 40 too 100 degreees Fahrenheit, use Mobiil SHC 6
634 gear lube. In tempe
eratures belo
ow 40 degrees, use Mobbil 1 synthetiic 5W‐30. B
Blower Bru
ushes TThe infinity b
brush used in the FORCEE/2 Next Gen
neration’s bl ower motorr is expected
d to last the lifetime o
of the motorr; it is not replaceable. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
In
nstruction M
Manual | 10
TTroubleSShootingg Problem P
M
Machine doe
es not turn o
on. Power cord c
P
connection iis loose. Power cord n
P
not connecteed at machine or p
m
power sourcce. Machine’s bl
M
lower or agittator circuit break
c
er(s) has trippped. Circuit break
C
ker at powerr source has tripped.
h
B
Blower does not run. Likkely Cause EEnsure appro
opriate pow
wer cord cconnection aat machine.
EEnsure appro
opriate pow
wer cord cconnection aat power sou
urce. C
Connect pow
wer cord. PPush to reset circuit breaaker(s). R
Reset circuit breaker. Electrical sys
E
stem may haave a loose wire. Wired remot
W
te plug not pplaced in electrical pan
e
nel’s receptaacle. H
Have the sysstem inspectted by a q
qualified tecchnician. PPlug the wireed remote’s plug into the elecctrical panel’’s rreceptacle. If you do no
ot have tthe remote ccord, the jum
mper p
plug is required to be insserted into the rem
mote’s recepttacle for ssystem to bee controlled by the eelectrical panel. Wired remot
W
te cord & eleectrical PPlace the eleectrical paneel blower panel switch
p
es need to bbe in aand agitator switches in the ‘ON’ ‘ON’ position
n for machinne to p
position. Plaace the remo
ote’s turn on. t
b
blower switcch in the ‘ON
N’ p
position; place the remo
ote’s aagitator swittch in the ‘ON’ p
position. Blower’s circ
B
cuit breaker needs to B
Blower circuit breaker iss a small be reset. b
rrocker switch. There sho
ould not b
be white sho
owing on thee circuit b
breaker. Variable Spe
V
ed switch is in the PPlace Variable Speed sw
witch in neutral posit
n
tion. eeither the ‘off’ or ‘on’ po
osition. Worn brushe
W
es in blower motor. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English Remedy H
Have a qualiffied technician rreplace blow
wer brushes or rreplace blow
wer motor. www
w.inteccorrp.com
In
nstruction M
Manual | 11
Problem P
Likkely Cause Remedy A
Agitator does not run. Blower has t
B
o be on for aagitator to come on.
t
TTurn blower on. Agitator circu
A
uit breaker nneeds to be pressed.
b
Foreign mate
F
erial causingg jam in hopper. h
Blower conta
B
actor overload activated. a
EEnsure agitator circuit breaker is rreset. R
Remove pow
wer cords, clear jam, aand restart ssystem. LLet system cool. If happ
pens o
often, contact Intec for ssettings. M
Machine is o
on, yet no maaterial ccomes out of hose. Slide gate is S
closed. O
Open slide gate. Insulation blockage in hoose. TTurn system off, removee hose aand clear blo
ockage. Air pocket in
A
n hopper is preventing in
p
nsulation froom feeding into f
agitators. Airlock seal i
A
s worn. D
Disconnect eelectrical pow
wer. R
Redistribute insulation m
material inside hoppeer. Inspect airlock seals for cuts and w
wear. Have a qualified ttechnician reeplace airlocck seals. D
Disconnect eelectrical pow
wer, rremove obsttruction. Insulation exxiting hose iss d
dribbling outt. Airlock has a
A
n obstructioon preventing in
p
nsulation froom exiting. e
Heavy insula
H
tion materiaal. PPush slide gaate in 1‐2 ho
oles. Kink in hose.
K
. SStraighten hose. Airlock seal i
A
s worn. C
Circuit breakkers need ressetting o
often. Low voltage L
or low ampeerage. Extension co
E
ord gauge is ttoo small. s
Inspect airlock seals for cuts and w
wear. Have a qualified ttechnician reeplace airlocck seals. SSystem requ
uires 115V / 15amp sseparate circcuit for agitaator and eeach blower. U
Use a 12/3 h
heavy duty (ii.e. SSJ300V) exteension cord w
when length is 100
0’ or less. Usse a 10/3 h
heavy duty eextension co
ord when length is oveer 100’. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
In
nstruction M
Manual | 12
SSpecificaations W
Weight 283 lbss 175 kgg 115 VA
AC, two stagge (5.5+psi att sea level)
1 ½ HPP, 115VAC, B
Blower A
Agitator Mottor P
Power Requiirements 2‐115V
VAC, 15 amp
p circuits, tw
wist lock pow
wer recept acles and 2‐‐ 12/3, 100’ h
heavy duty p
power cords.
44‐3/4”
114cm
30‐1/4”
77cm
TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
In
nstruction M
Manual | 13
EElectricaal Drawin
ng TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
In
nstruction M
Manual | 14
M
Making aa Claim ffor Damage or LLoss YYour Intec prroducts were carefully p
packed and tthoroughly innspected beefore leavingg our factoryy. We u
understand tthat damage
e to or defeccts with yourr system maay unfortunaately occur. Please inspeect your sshipment carefully upon arrival and save the shiipping contaainers and paackaging maaterials in case of d
damage. TThe following table provvides you witth appropriaate actions too take when
n certain issu
ues are realizzed. ISSUE Action
n to Take 1 DAMAG
GE in Transit A Visible PRIOR to u
unpacking (Damage to ccarton or ng material). packin
B Visible AFTER unp
packing (Only apparent when unpaccked). C Shortage (# contaainers does n
not agree to transp
portation billl). File Claim with appropriate freeight carrierr. File Claim with appropriate freeight carrierr. File Claim with appropriate freeight carrierr. When
n items leave
e our warehouse, the sh
hipper assum
mes responsiibility. It is tthe responsibility of the
e consignee tto file a claim
m. Proper d
documentati on is necesssary to suppo
ort the claim
m. Please
e inspect all items prope
erly prior to signing for tthem. 2 Items re
eceived not ccorrect A Incorrrect items re
eceived. Contacct Intec Custtomer Servicce B Incom
mplete orderr received (not backorde
ered). Contacct Intec Custtomer Servicce 303.833.6
6644 ext. 2 [email protected]
3 Issue wiithin the wa
arranty perio
od A Troub
bleshooting ((machine or part not operating as Contacct Intec Custtomer Servicce intend
ded). B Replacement partt(s). Contacct Intec Custtomer Servicce with troubleshooting you
ur issue, and 303.833.6
6644 ext. 3 Intec can assist w
et you back up and runn
ning. If warrranty parts aare o
or can ge
requirred, a return
n material au
uthorization (RMA) will be [email protected]
issued
d by technical service. 4 Issue ou
utside of warrranty perio
od A Replacement partt, troublesho
ooting. Contacct Intec Custtomer Servicce Contacct Intec Custtomer Servicce B Need assistance ffrom a servicce center. 303.833.6
6644 ext. 3 SShipping Dep
partment phone : 303‐833‐66644, 800‐66
66‐1611 fax: 3003‐833‐66500 Intec 3
3771 Monarch Street, un
nit F email: [email protected] websitte: www.inteccorp.com EErie, CO 805
516 TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com
In
nstruction M
Manual | 15
W
Warrantty Itt is expresslyy understood
d and agreed that no officcer, agent, saalesman or employee of tthe manufacturer Intec (MANUFACTURER) h
has the autho
ority to obliggate the MAN
NUFACTURER
R by any term
ms, stipulatio
ons, or cconditions no
ot herein exp
pressed; that all previous representations and agreeements, eitther verbal or written, rreferring to the machinerry and equipm
ment, which is the subjecct of this Warranty, are hereby supersseded aand canceled
d, and that th
here are no p
promises or aagreements ooutside of thee Warranty aagreement. Further‐
m
more, the MA
ANUFACTURER hereby diisclaims any implied warrranties of meerchantabilityy, or implied war‐
rranties of fitn
ness for a parrticular purpose. W
With the abo
ove understan
nding, the M
MANUFACTUR
RER providess the followin
ng two (2) Yeear Limited W
Warranty, aand no otherr, for its insulation blowin
ng machines ((MACHINES) : aa) MANUFAC
CTURER warraants to the o
original purch
haser that thee MACHINE iis well made, of good maaterial aand durable; but only if th
he MACHINEE is operated and maintained in accorrdance with tthe Instructio
on M
Manual. Thiss Warranty iss void if the M
MACHINE is n
not so operatted and main
ntained, or iff the MACHIN
NE is u
used for blow
wing materials other than
n those which
h are intendeed to be used
d with the M
MACHINE. b
b) MANUFAC
CTURER guaraantees the M
MACHINE to b
be free from manufacturiing defects aat the time off sshipment, and to remain free from de
efects when o
operated undder normal u
use, for a perriod of two (2
2) years ffrom the date
e of factory sshipment, with the excep
ption of the bblowers, elecctrical and airr lock compo
onents, w
which are waarrantied for a period of o
one (1) year ffrom date off factory ship
pment. cc) This Warraanty shall nott apply to anyy MACHINE o
or componennt part which
h, in the opin
nion of the M
MANUFACTU
URER, has bee
en altered, subject to missuse, negligeence, acciden
nt or operateed beyond facctory rrated capacitty. All requessted Warrantty work shou
uld be perforrmed at MAN
NUFACTURER
R’s factory orr by an A
Authorized Faactory Servicce Facility. Faailure to have the Warrannty work don
ne at MANUFFACTURER’S factory o
or by an Auth
horized Facto
ory Service Faacility will vo
oid this Warraanty. MANU
UFACTURER w
will bear full rresponsibilityy to repair orr replace, at its option, wiithout chargee to the origiinal purchaseer, any part tthat, in tthe MANUFA
ACTURER’S op
pinion, is fou
und to be deffective. d
d) All parts claimed defecctive by origin
nal purchaser shall be retturned, properly identifieed, to M
MANUFACTU
URER’s factorry or Authorizzed Factory SService facilitty, freight prrepaid. All reeplacement, repaired o
or non‐defective parts will be returned to purchasser, freight coollect. MANU
UFACTURER will supply rreplacement parts prior to purchaser,, freight colle
ect. MANUFA
ACTURER willl supply repllacement parts prior tto receipt of any parts claaimed defective, only with the undersstanding thatt such replacement parts will be sshipped to pu
urchaser at the then prevvailing price o
of said part, C
C.O.D., freigh
ht collect. M
MANUFACTUR
RER will rreimburse co
ost of any succh part only aafter receipt and inspecti on, and finding said part defective. ee) MANUFAC
CTURER’s liab
bility is expressly limited tto the repair or replacem
ment of defecctive parts set forth in tthis Warrantyy. All other d
damages and
d warranties, statutory orr otherwise, being waived
d are original p
purchaser as a condition o
of sale and p
purchase of said machines. Furthermore, the MAN
NUFACTURER shall n
not be liable for damagess or delays caaused by defe
ective materrial or workm
manship. TT: 303‐83
33‐6644 or
o 800‐666
6‐1611
O
Original Languag
ge ‐ English www
w.inteccorrp.com