Transcript
Paris Necklace By Cathie Filian & Steve Piacenza Supplies Mod Podge ® Acrylic Shapes Mod Podge ® Hard Coat Mod Podge ® Podgeable Paper Flip Books Travel Pencil Scissors Gem glue Rhinestones Jump-ring Jewelry Pliers Necklace Instructions Beginner Skill Level | 1 Hour Crafting Time 1. Begin with a large rectangle Podgeable. Trim the Paris poster image from the Travel paper to fit the Podgeable shape. 2. Apply a thin coat of Mod Podge to the bottom of the Podgeable shape and to the top of the Paris image. Position the image on the back of the shape. Smooth with your fingers. Apply a top-coat of Mod Podge to the back of the paper. 3. Using gem glue, attach rhinestones to the design. Allow to dry for 2 hours. 4. Attach to a necklace with a jump-ring. PROJECT TIP: Podgeable shapes are great for making key chains and tags. Please read and follow all manufacturers’ instructions for all tools and materials used. Provide adult supervision if children participate in this project. Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc.disclaims any liability for untoward results.