Transcript
Disconnect all power sources before making any connections Re fer to User Manual for co mplete installtion instructions Débranchez toutes les source s d'énergie avant d'établir tous les rapports Desco necte to d as l a s f u e nte s d e e n e rg í a a nte s d e h a ce r cu a l e s q u i e ra co n exi on e s Ré fé re z-vo us au manuel d'utilisateur pour des instructions co mplètes d'installtion Re fiera al manual de usuario para las instrucciones co mpletas del installtion COMPONENT (YPbPr) CONNECTION Purpose: If you have a source that requires Component connection (YPbPr) to your TV (e.g., DVD Player) then you will need to use a VGA-Component Cable adapter kit. The following are step-by-step instructions to guide you through the set up process. (Note: We recommend the use of Composite (Video/RCA) connection instead of component from most analog sources; your Westinghouse TV employs superior video processing and will provide optimal video quality. Always use HDMI when available.) ADAPTER KIT PARTS (INCLUDED) • 1 VGA-Component Cable • 1 Mini-RCA Cable VGA-Component Cable For assistance call: 1-800-701-0680 Mini RCA Cable CONNECTING STEP 1: Connect VGA-Component cable and Mini-RCA audio cable to VGA port and PC audio port as shown above. EXAMPLE: DVD player connected via Component (YPbPr). VIEWING STEP 2: After you complete connecting your device via VGA-Component as shown is Step 1, Press the “Input” button on the remote control to visibly see all your input selections on the TV screen as shown. VGA-COMPONENT STEP 3: Using the remote control, toggle and select VGA-Component input. (Note, you are ready to begin viewing content through the VGA-Component input. The VGA input for PC is disabled and can be restored using the input select function again.) © 2013 Westinghouse Digital , LLC. All rights reserved. Specifications subject to change without notice. ¼ and Westinghouse are trademarks of Westinghouse Electric Corporation. MA-PS-0101-0102