Transcript
Battery charging Registering a handset For optimal performance, charge the handset battery for at least 16 hours before use. To register a new handset: 1. Place the unregistered 12:00AM handset in the telephone Place in base. Charger 2. Press the MENU softkey on the telephone base while in idle mode. 3. Press the UP and DOWN Navkeys to highlight Register 12:00AM Handset, then press the Register handset: Press MENU in the SELECT softkey. base. Find 'Register in the Main • Registering Handset will Handset' Menu. Press SELECT. appear on the telephone base display. • Registration in progress... 12:00AM will appear on the handset Registration display. in progress... • The registration process may take up to 90 seconds to complete. When the registration process is complete, the telephone base and handset will generate a confirmation tone. The newly registered handset will be assigned the next handset registration number. Quick start guide for model LS5105 Battery installation Electrical outlet not controlled by a wall switch Install the battery as shown below. 1. Press the tab and slide the battery compartment cover downwards. 2. Insert the plug as indicated. Make sure it is plugged securely and matches the colorcoded label inside the battery compartment. THIS SIDE UP Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH THIS SIDE UP Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA 3. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. Power adapter 4. Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. Charger Charge light THIS SIDE UP Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA THIS SIDE UP Battery Pack BT5632 / BT5872 3.6V 550mAh Ni-MH WARNING: DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA NOTE: Use only the power adapter and battery supplied with your VTech telephone. NOTE: For complete feature instructions, please refer to your user’s manual. IMPORTANT! If your product is not working properly: • Refer to the Troubleshooting section of the user’s manual. • Visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www. vtechcanada.com or 1 (800) 267-7377. 96-006551-020-100 issue 1
