1
Download Universal Remote Control UR5U-8800L User's Manual
Transcript
Operating Instructions For CLIKR -5 ™ Cable Remote Control UR5U-8800L 1 Introduction 4 Button Functions The CLIKRTM-5 UR5U-8800 is designed to operate the Scientific-Atlanta, Pioneer, Pace Micro, Samsung and Motorola digital set tops, plus the majority of TV, VCR, DVD and AUDIO equipment on the market as shown below. CABLE : Cable Converters TV : Televisions VCR : VCRs and TV/VCRs DVD: DVD Players AUX : Audio Receivers and DVRs, etc. 2 Replacing Batteries STEP2 Press the [COMPONENT] button (TV, VCR, DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed. Now, repeat the Auto-Search Method for those Components you could not program earlier with the Pre-Programmed Method. STEP3 Point the remote control toward the Component and enter the 3-digit code number assigned to your brand. C. Finding a Component Button’s Setup Code Number *Note : If the 3-digit code number you just entered is correct, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off. If you used the Auto-Search Method to program a Component, you may not know what the correct code number is. Here is a way for you to identify the code number, so you can record it for future reference. STEP4 After you’ve entered the correct code number and the Component has turned Off, press the [POWER] button to turn the Component back On. Now it’s time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand. Before you program or operate the remote control, you must install two new AA alkaline batteries. STEP1 Remove the battery compartment cover on the back of your remote control. STEP2 Check battery polarity carefully, and install the batteries as shown in the illustration below. STEP3 Replace the battery compartment cover. STEP5 Once you have found the correct 3-digit code, save it by pressing the same [COMPONENT] button one more time. The Component LED light will blink twice to confirm that the code was successfully stored. Now, program the rest of your Components by repeating STEPS 1-5. *Note : If the Pre-Programmed Method did not work, or if the Code Tables do not list your Component brand, use the Auto-Search Method as explained in Section B. B. Auto-Search Method STEP1 Turn on the Component you want to program (TV, VCR, DVD or AUX). 5 Programming the Remote Control 3 Operations Universal Remote Control, Inc. www.universalremote.com OCE-0052C REV 02 (04/30/07) DEFAULT STATE: Component Default: CABLE Channel Default: CABLE channel and numbers through the CABLE. You have the option of controlling your CABLE channel and numbers through the TV or VCR. Refer to section F for programming steps. Volume Default: CABLE volume and mute through the CABLE. You have the option of controlling your CABLE volume and mute through the TV, VCR or DVD. Refer to section G for programming steps. There are two ways you can program your CLIKRTM-5 remote: * The Pre-Programmed 3-Digit Code Method * The Auto-Search Method The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code numbers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and easiest of the two methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through all the codes in the remote control, one at a time. IMPORTANT SETUP NOTE! This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 seconds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will need to start over. A. Pre-Programmed 3-Digit Code Method STEP1 Turn on the Component you want to program (TV, VCR, DVD or AUX). STEP2 Press the [COMPONENT] button (TV, VCR, DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed. STEP3 Point the remote toward the Component and press the [CH] or [CH] button one step at a time or keep it pressed. The remote will emit a series of ON/OFF commands. Release the [CH] or [CH] button as soon as the Component turns Off. STEP4 Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, repeat from STEP 3 using [CH] or [CH] buttons to find the correct code. STEP5 Save the code. (Same as for 3-Digit Code Programming Method - Section A). STEP1 Press the [COMPONENT] button (TV, VCR, DVD or AUX) you want to verify and the [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds. STEP2 Press the [INFO] button and count the number of times the Component LED light blinks. This number indicates the first digit of the code, followed by the second and third, each separated by a one second pause when the LED will turn off. *Note : 10 blinks represents the number zero. Example : One blink, (pause), eight blinks, ( pause) and three blinks, indicates code number 183. D. AUX Function: Programming a 5 th Component You can take advantage of the AUX function to program a 5th Component such as a second TV, VCR, DVD or Audio Component. STEP1 Turn on the 5 Component you want to program (TV, VCR, DVD or Audio). th STEP2 Press the [AUX] button and the [OK/SEL] button simultaneously for 3 seconds.The [AUX] Component LED will turn on for 30 seconds. STEP3 Press the [COMPONENT] button you want to setup. Point the remote control toward the Component and enter the 3-digit code number assigned to your brand. *Note : If the 3-digit code number you just entered is the correct number, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off. STEP4 Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code. STEP5 Once you have found the correct 3-digit code, save it by pressing the [AUX] button one more time. The Component LED light will blink twice to confirm the code was stored. Now when you press the AUX button, all the buttons will work with that 5th Component. E. Programming the System On/Off Button STEP1 Press the [CBL] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] Component LED will turn on for 30 seconds. STEP2 Press the [VOL +] button. STEP3 Press the [TV] button. The Component LED will blink twice to confirm the programming. This allows you to program the System On/Off button so it can send up to five power On/Off commands with one button press. To return to original state: If you wish to restore the CBL volume control in CBL mode, repeat the above steps but press [CBL] in STEP3 . STEP1 Press the [CBL] button. H. Programming a ‘Macro’ button. STEP2 Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds. STEP3 Press the first [COMPONENT] button you want to store in the [SYSTEM ON/OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [SYSTEM ON/OFF] button. STEP4 Press the [CH+] button to save the power commands you stored. The [CBL] button will blink twice to confirm the commands have been saved. F. Programming Channel Control You can program the channel controls (Channel Up, Channel Down, Last and Numbers) from one Component to operate in another Component mode. Default channel control settings on the remote control are as follows: CBL : CBL DVD : DVD T V : CBL AUX : AUX VCR : CBL If you wish to store the TV channel control in TV mode, use the following steps. In CABLE mode, the M button can be programmed to act as a ‘Macro’ . This allows you to program from one up to three separate channels that can be accessed by simply pressing the programmed Macro button. STEP1 Press the [CBL] button to select the CBL mode. STEP2 Press the [M] button and [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds. STEP3 Enter the 3 or 4-digit code for the channel you want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example, 050), then press the [STOP] button. Repeat this process for the third channel. The [CBL] button will blink once for each channel entered. STEP4 Press the [CH+] button to store the channels that were selected. The [CBL] button will blink twice to confirm the storage of commands. STEP1 Press the [TV] button and the [OK/SEL] button simultaneously for 3 seconds. The [TV] Component LED will turn on for 30 seconds. To access the programmed channels, press the [M] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel. STEP2 Press the [VOL -] button. I. Low Battery Warning STEP3 Press the [TV] button again. The Component LED will blink twice to confirm the programming. When the batteries are low and need to be replaced with fresh batteries, the Component LED lights will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment. To return to original state: If you wish to restore the CABLE channel control in TV mode, repeat the above steps but press [CBL] in STEP3 . G. Programming Volume Control You can program the volume controls (Volume Up, Volume Down and Mute) from one Component to operate in another Component mode. Default volume control settings on the remote control are as follows: CBL : CBL DVD : TV T V : TV AUX : AUX VCR : TV If you wish to store the TV volume control in CBL mode, use the following steps. J. Memory Lock System This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control. K. Record Your Component Set-up Codes TV Set-up Code Number: VCR Set-up Code Number: DVD Set-up Code Number: AUX Set-up Code Number: 6 Set-up Code Tables CABLE Converter Remote Converter Code No 001 Motorola 002 UR5U-8800L TV ABEX ADMIRAL ADVENT ADVENTURA AIKO ALERON AKAI A MARK AMERICA ACTION AMPRO AMSTRAD ANAM AOC APEX DIGITAL AUDIOVOX AVION BARCO BELCOR BELL&HOWELL BLAUPUNKT BRADFORD BROKSONIC BROCKWOOD CAIRN CANDLE CAPEHART CELEBRITY CENTURION CETRONIC CITIZEN CLARION CLASSIC CLP CLASSIC COLORTYME CONCIERGE CONCERTO CONTEC CORNEA CORONADO CRAIG CROSLEY CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DIMENSIA DREAMVISION DUKANE DUMONT DURABRAND DWIN DYNASTY DYNATECH EIKI ELECTROBAND ELECTROHOME ELEKTRA EMERSON ENVISION ESA FISHER FUJITSU FUNAI FUTURETECH GATEWAY Manufacturer/Brand GE Scientific-Atlanta, Pioneer, Pace Micro, Samsung Manufacturer/Brand TV Set-Up Code Number 025 072 161 160 251 247 002 103 028 197 146 248 404 405 112 143 043 167 073 052 043 054 056 080 112 131 197 112 058 363 006 076 454 388 441 233 116 161 072 088 043 238 116 201 197 002 003 363 058 070 197 043 197 002 003 043 101 103 143 363 043 043 161 116 197 073 363 043 050 051 116 143 043 054 164 043 143 197 101 143 363 043 016 043 044 076 103 114 125 127 143 363 143 363 320 319 284 363 161 235 025 011 116 073 096 177 257 043 062 187 070 143 024 076 196 072 028 048 043 155 005 197 047 050 051 076 096 143 151 153 154 363 116 197 323 007 057 246 198 346 396 028 043 052 043 242 268 TV Set-Up Code Number 160 144 165 073 197 008 009 034 056 074 130 155 161 363 GEM 391 GIBRALTER 116 073 GOLDSTAR 113 116 102 106 112 119 127 143 363 GRUNPY 028 043 HALL MARK 363 HARLEY DAVIDSON 028 HARVARD 043 HAVERMY 081 HELLO KITTY 076 HIMITSU 043 HISENSE 419 HITACHI 011 166 009 010 012 023 075 143 158 072 363 HP 378 316 327 421 INFINITY 164 INFOCUS 333 230 330 INSIGNIA 350 400 052 402 403 INTEQ 073 JANEIL 002 JBL 164 JCB 070 JCPENNEY 024 197 008 009 030 065 101 143 160 363 JENSEN 013 JVC 038 034 070 083 145 199 210 240 406 KAWASHO 116 070 197 KEC 043 KENWOOD 197 070 KLEGG 466 KLOSS 002 059 KLOSS NOVABEAM 002 KMC 143 KTV 043 197 143 154 KURAZAI 072 LG 363 113 116 102 106 112 119 127 143 284 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 166 007 015 052 160 164 251 MAGNAVOX 164 059 197 003 060 061 063 064 127 022 160 094 226 390 363 MAJESTIC 161 072 MARANTZ 197 164 MATSUI 164 MATSUSHITA 080 MAXENT 242 MEGATRON 116 197 011 MEMOREX 007 072 363 METZ 088 MGA 197 024 028 042 363 MIDLAND 161 073 MINERVA 088 MINTEK 362 MINUTZ 008 MITSUBISHI 124 109 024 028 040 042 146 191 363 MONTGOMERY WARD 161 072 MOTOROLA 081 MTC 197 062 101 363 MULTITECH 043 NAD 015 025 NEC 272 130 134 197 040 016 024 056 019 236 237 262 NET TV 242 NIKEI 043 NIKKO 116 197 NTC 103 NUVISION 351 OLEVIA 432 363 161 144 160 ONKING 043 ONWA 043 OPTIMUS 025 OPTONICA 019 251 OPTOMA 265 270 ORION 096 PANASONIC 080 034 056 092 164 208 PHILCO 197 003 059 060 064 164 024 056 063 363 PHILIPS 164 005 093 038 197 003 059 127 206 431 363 PILOT 116 PIONEER 234 135 025 197 018 023 116 374 393 272 POLAROID 388 VCR Manufacturer/Brand PORTLAND PRISM PROSCAN PROTON PROTRON PULSAR QUASAR RADIO SHACK RCA REALISTIC ROCTEC RUNCO SAMPO SAMSUNG SAMSUX SANSEI SANSUI SANYO SCEPTRE SCOTCH SCOTT SEARS SELECO SHARP SHENG CHIA SHOGUN SIEMENS SIGNATURE SIMPSON SOLE SONY SOUNDESIGN SPECTRICON SQUAREVIEW STARLITE SSS SUPRA SUPRE MACY SUPREME SVA SYLVANIA SYMPHONIC SYNTAX OLEVIA TANDY TATUNG TECHNICS TECHNOL ACE TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA TMK TNCI TOSHIBA TOTEVISION TVS UNIVERSAL VICTOR VIDEO CONCEPTS VIDIKRON VIDTECH VIEWSONIC VIKING VIZIO WARDS WAYCON WESTINGHOUSE YAMAHA YORK YUPITERU ZENITH ZONDA Set-Up Code Number 143 363 034 144 160 161 165 167 131 058 143 171 173 193 363 392 398 116 073 034 056 092 019 143 043 127 363 333 160 165 065 144 161 197 024 056 152 023 074 363 007 019 043 047 186 168 169 178 179 180 181 182 073 395 416 197 058 242 363 258 050 089 101 105 127 143 160 228 229 363 197 076 096 166 007 020 053 057 082 187 276 116 197 028 043 048 143 363 015 030 007 028 057 143 094 160 082 165 166 363 189 200 205 011 251 019 014 028 029 022 143 175 363 081 116 088 072 003 231 232 001 139 147 126 185 085 213 277 028 003 043 363 112 052 043 043 363 116 002 070 328 197 003 052 059 060 063 064 164 044 160 127 052 432 363 161 144 160 251 056 062 034 080 028 363 002 003 24 028 043 072 101 143 363 037 046 072 172 363 073 138 015 030 007 040 062 101 325 143 096 008 009 145 146 174 188 192 164 363 242 389 002 386 387 008 009 019 028 060 061 063 064 072 074 143 164 034 363 015 076 280 435 147 197 371 372 363 363 043 363 073 072 095 103 284 112 VCR Manufacturer/Brand ADMIRAL Set-Up Code Number 025 053 Manufacturer/Brand ADVENTURA AIKO AIWA AKAI AMERICA ACTION AMERICAN HIGH AMPRO ANAM ASHA AUDIO DYNAMICS AUDIOVOX BEAUMARK BROKSONIC CALIX CANON CAPEHART CCE CITIZEN COLT CRAIG CURTIS MATHES CYBERNEX DAEWOO DAYTRON DBX DYNATECH ELECTROHOME ELECTROPHONIC EMERSON FISHER FUJI FUNAI GARRARD GE GO VIDEO GOLDSTAR GRADIENTE HARLEY DAVIDSON HARMAN KARDON HARWOOD HITACHI HQ INSTANTREPLAY JCL JCPENNEY JENSEN JVC KEC KENWOOD KLH KODAK LG LLOYD LOGIK LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MATSUSHITA MEI MEMOREX MGA MGN TECHNOLOGY MINOLTA MITSUBISHI MOTOROLA MTC MULTITECH NEC NIKKO NOBLEX NORDMENDE OLYMPUS OPTIMUS OPTONICA ORION PANASONIC VCR Set-Up Code Number 034 117 034 161 016 146 043 046 124 125 117 031 072 145 040 012 023 039 043 101 040 035 037 129 101 028 145 108 024 117 101 117 024 003 022 102 041 145 040 111 116 117 005 007 010 065 108 110 120 108 012 023 039 043 034 053 059 101 006 029 035 017 025 027 034 036 037 046 101 129 131 153 162 116 145 003 010 008 009 145 034 034 072 147 063 107 109 144 145 132 136 155 115 102 101 106 114 020 012 123 034 034 012 045 024 004 026 150 018 034 043 063 137 160 020 034 145 145 012 015 066 101 020 102 043 048 043 130 150 055 060 012 050 152 145 101 014 048 034 047 024 101 145 101 106 114 020 012 123 034 024 034 003 009 017 106 102 067 034 068 041 156 164 145 067 069 012 156 145 101 027 030 145 145 101 003 010 014 034 053 072 102 134 139 145 045 046 059 040 020 059 061 151 020 045 046 051 049 168 053 145 034 102 024 034 012 023 039 043 048 101 040 043 031 101 053 054 025 066 070 145 083 133 140 157 163 074 167 DVD Manufacturer/Brand PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PROFITRONIC PROTEC PULSAR QUARTZ QUASAR RADIO SHACK RADIX RANDEX RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANKY SANSUI SANYO SCOTT SEARS SHARP SHINTOM SHOGUN SIGNATURE SINGER SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC VILLAIN WARDS WESTINGHOUSE XR-1000 YAMAHA ZENITH Set-Up Code Number 020 063 145 034 067 145 067 034 101 054 071 156 145 101 020 021 048 108 040 024 072 002 014 066 145 075 123 101 101 107 109 144 147 158 041 145 020 140 034 102 003 008 010 014 034 053 054 101 102 145 058 148 014 102 104 113 115 120 032 066 107 109 125 053 022 043 048 003 010 007 014 134 102 017 037 120 129 131 003 008 010 014 020 101 009 017 073 120 053 054 159 165 145 024 040 034 024 001 057 058 052 003 076 154 053 145 034 020 034 059 067 145 034 010 034 039 043 034 039 043 070 145 019 034 101 145 034 006 131 008 059 047 082 020 120 101 102 102 012 048 012 034 046 102 034 003 020 017 024 034 053 054 131 102 145 024 025 024 034 145 012 034 039 043 072 080 056 048 101 034 058 VCR-TV/VCR Combos Manufacturer/Brand AMERICA ACTION DAEWOO EMERSON FUNAI GOLDSTAR HARLEY DAVIDSON HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH Set-Up Code Number 117 005 117 153 034 101 123 034 034 101 101 123 034 034 067 101 070 167 034 067 123 034 101 057 154 067 034 034 034 Manufacturer/Brand AIWA AKAI ALLEGRO ALPINE APEX DIGITAL BLAUPUNKT BROKSONIC CINEVISION COBY CYBERHOME DENON DURABRAND DVD 2000 EMERSON ENTERPRISE FISHER FUNAI GE GOLDSTAR GO VIDEO GREENHILL HARMAN KARDON HITACHI HITEKER ILO INITIAL INTEGRA JBL JVC KENWOOD KISS KLH KRELL LITEON LEXICON LG MAGNAVOX MARANTZ MALATA MERIDIAN MICROSOFT MINTEK MITSUBISHI MYRYAD NAD NAKAMICHI NESA ONKYO OPTIMUS OPPO ORION PANASONIC PHILIPS PHILIPS MAGNAVOX PIONEER POLAROID POLK AUDIO PROCEED PROSCAN RCA RIO RJTECH SAMSUNG SANSUI SANYO SEARS SENSORY SCIENCE SHARP SHINSONIC SONIC BLUE SONY SYLVANIA SYMPHONIC TATUNG TEAC TECHNICS TECHWOOD THETA DIGITAL THOMPSON DVD Set-Up Code Number 146 281 091 098 087 111 115 111 130 091 260 271 080 173 138 091 017 091 143 074 147 143 027 091 137 091 220 221 222 111 084 140 101 087 268 111 142 180 280 084 012 151 279 135 104 264 265 148 091 057 074 066 096 083 095 267 153 027 206 111 282 017 102 134 088 103 111 076 141 180 023 266 130 021 042 138 144 150 285 066 083 095 105 166 276 141 066 023 099 131 233 141 066 086 027 027 091 269 056 070 165 137 159 275 154 147 130 222 094 033 091 001 033 118 145 191 286 143 143 102 023 270 042 088 023 027 AUX-AUDIO Manufacturer/Brand TOSHIBA URBAN CONCEPTS VENTURER X-BOX YAMAHA ZENITH Set-Up Code Number 034 130 141 164 188 035 149 027 206 042 089 166 197 138 057 074 091 DVD-DVD Recorders Manufacturer/Brand GO VIDEO CYBERHOME ILO KISS LITEON PANASONIC SENSORY SCIENCE SONY TOSHIBA Set-Up Code Number 220 221 222 271 268 279 265 138 222 191 188 273 DVD-TV/DVD Combos Manufacturer/Brand AKAI AIWA AUDIOVOX FUNAI INSIGNIA MINTEK SAMSUNG SYLVANIA SYMPHONIC TOSHIBA Set-Up Code Number 281 146 284 143 292 282 165 143 143 130 DVD-TV/DVD/VCR Combos Manufacturer/Brand MAGNAVOX PANASONIC SYLVANIA TOSHIBA Set-Up Code Number 143 144 143 164 DVD-DVD/VCR Combos Manufacturer/Brand GO VIDEO PANASONIC PHILIPS SAMSUNG SANSUI SONY TOSHIBA ZENITH Set-Up Code Number 137 150 105 (VCR Functions for VCR 067) 137 159 154 145 141 091 (VCR Functions for VCR101) AUX-AUDIO Manufacturer/Brand Set-Up Code Number ADC ADCOM AIWA AKAI AMC ANGSTROM ANTHEM ARCAM ATLANTIC TECHNOLOGY AUDIO FILE AUDIO MATRIX AUDIO TECHNICA B&K BOSE BOSTON ACOUSTICS CARVER CINEMA SOUND CITATION CLARION DELPHI DENON ELAN 007 082 092 225 161 269 356 170 018 104 202 203 213 211 188 189 125 126 127 281 282 142 335 337 141 077 342 071 167 134 096 097 070 170 224 347 409 460 447 006 028 061 071 201 214 226 185 013 077 284 134 148 026 556 109 215 230 234 330 340 679 057 290 Manufacturer/Brand ENLIGHTENED AUDIO ESCIENT FISHER FLEXTRONICS FOSGATE AUDIONICS GE GOLDSTAR HARMAN KARDON HITACHI INSIGNIA INTEGRA JAMO JCPENNEY JENSEN JVC KENWOOD KLH KOSS KRELL KYOCERA LEXICON LINN LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MERIDIAN MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIRO NILES ONKYO OPTIMUS OUTLAW PANASONIC PARASOUND PHILIPS PIONEER POLKAUDIO PROCEED RCA REALISTIC ROTEL RUSSOUND SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SIRIUS SONY SOUNDESIGN SSI SUNFIRE TEAC TECHNICS THETA DIGITAL TOSHIBA XM SATELLITE RADIO YAMAHA ZENITH Set-Up Code Number 099 098 368 451 214 182 297 378 148 342 056 008 148 233 077 028 118 318 020 589 275 017 046 108 080 209 398 216 058 163 191 114 279 291 026 066 145 192 182 005 280 374 331 216 573 072 384 672 007 120 235 236 237 357 360 124 377 009 139 052 165 115 004 056 086 164 152 077 006 028 031 040 063 185 186 265 119 289 296 492 238 286 100 012 013 628 242 204 157 158 042 043 081 112 077 186 113 040 244 245 172 183 287 176 343 403 275 017 046 108 080 209 026 041 342 032 195 219 177 292 626 129 130 132 261 294 295 333 334 249 250 063 119 014 039 044 069 168 116 035 198 480 556 556 144 268 010 048 117 156 067 288 019 056 073 075 095 074 083 085 654 379 391 392 016 653 040 048 110 119 065 228 214 019 091 026 094 175 652 024 102 106 447 370 555 001 018 247 248 166 101 184 218 271 380 036 068 344 345 182 005 019 049 040 212 217 122 176 193 219 178 177 200 257 262 136 060 087 198 278 556 026 253 169 067 173 205 264 232 089 264 274 143 210 AUX-DVR(TIVO) Manufacturer/Brand HUGHES HUMAX PHILIPS RCA REPLAY NETWORKS SONY TIVO TOSHIBA Set-Up Code Number 817 817 790 817 809 775 804 805 790 817 817
