Transcript
ICE MAKER 13-13/16 (35.1) Model WH95TP 17 (43.2) 25-1/4 (64.0) HT/W FLANGE ICE MAKER 24-3/4 (62.9) * POWER CORD 8-1/2 (21.6) 15-1/16 (38.2) W/FLANGE * ON BACK OF UNIT INCHES (CENTIMETERS) * WATER LINE INLET 14-3/8 (36.5) FLANGE ADD 1-1/2" TO DEPTH FOR WATER LINE CONNECTION FEATURES BENEFITS 1. High ice production Produces up to 23 lbs. of ice per day, and stores 12 lbs. 2. No drain required Can be easily installed and built into any convenient location. Only needs 1/4 inch outside diameter water line connection. 3. Front vented for built-in installation No need for extra fans, air space, or special venting to the outside of the cabin. Do not obstruct front grille. 4. Corrosive resistant components Hinges and fasteners are stainless steel to resist corrosion. 5. UV resistant components Metal door frame and handle, and specially coated grille withstand adverse effects caused by the sun. 6. Conserves water Only 2-3/4 gallons of water required to produce approximately 22 lbs. of ice. 7. Conserves energy Uses less electricity than a 75-watt light bulb. 8. Field reversible door with zero clearance door swing Fits any location, easy access. 9. Adjustable temperature control Permits adjustment of daily ice rate. 10. 1/2 inch wide flange Surrounds front of cabinet for easy mounting in surrounding cabinets. ADDITIONAL FEATURES: • See through, removable ice bucket • Travel pin keeps door securely closed • Available in 110/115V 60 cycle or 220/230V 50/60 cycle • Shipping weight: 65 lbs. • White vinyl clad steel cabinet and door All specifications subject to change without notice. KCC Printed in U.S.A. 8900 N. 55th Street Milwaukee, Wisconsin 53223 (414) 354-0300 FAX (414) 354-7905 www.u-line.com P/N SS-WH95TP
