Transcript
You will need your new battery faceplate, your headset, and a small Phillips screw driver. Step 1 Step 2 Remove the two screws located on the back of the headset. Turn the headset over and remove the faceplate with the logo and batteries attached. Step 3 Step 4 Screw the new faceplate on the headset Make sure the headset is turned off. Place the headset on the transmitter (charger) and allow your TV Ears to charge for 8 hours. TV Ears Inc. 2810 Via Orange Way Suite ‘A’ Spring Valley CA 91978 Phone: (888) 883-3277 Fax: (888) 958-7899 www.tvears.com