Transcript
ASSEMBLY INSTRUCTIONS FOR 31754 Fixture loop Glass Column Candle sleeve Fixture body Finial 1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration. 2. Unravel the power supply and ground wires and pass them through the center holes of column and fixture loop. Thread the bottom of column to the coupling at the top of fixture body, and then thread the fixture loop onto the protruding nipple from the top of column. Hand tightens until snug. 3. Thread finial to the coupling at the bottom of fixture body as shown. 4. Install candle sleeve onto the socket. 5. Carefully pass the center hole of glass through the candle sleeve and sit on the socket. 6. Install proper bulbs (not provided) to the sockets referring to the markings and labels on fixture for maximum wattage. 7. Restore power to the installation point ON. Retain this sheet for future reference. IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN! 01/21
