Transcript
ASSEMBLY INSTRUCTIONS FOR 31745 Fixture loop Sleeve wrench Socket ring Glass Fixture body 1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration. 2. Carefully place the glass over the socket and secure with the socket ring by sleeve wrench as shown in the illustration. Hand tightens until snug. 3. Install proper bulbs (not provided) to each socket referring to the markings and labels on fixture for maximum wattage. 4. Restore power to the installation point ON. Retain this sheet for future reference. IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN! 01.06
